pennsylvania cooperative education conference dale glacken, compliance assistance specialist october...
Post on 11-Jan-2016
241 Views
Preview:
TRANSCRIPT
Pennsylvania Cooperative Education Conference
Dale Glacken, Compliance Assistance Specialist
October 16, 2008
Student Safety in Work-Based Education
Goals for this sessionGoals for this session• Review OSHA purpose• Look at where our accidents are occurring• Discuss Ch 339• Review the Layout of OSHA Standards • See what OSHA has been finding• Top 10 List• STAR• Hazard Analysis• Brief look at OSHA resources• Questions and Answers
What does OSHA mean to you?What does OSHA mean to you?
OSH Act of 1970OSH Act of 1970PURPOSE:• " . . . to assure so
far as possible every working man and woman in the Nation safe and healthful working conditions and to preserve our human resources."
http://www.bls.gov/news.release/pdf/cfoi.pdf
http://www.bls.gov/news.release/pdf/cfoi.pdf
http://stats.bls.gov/iif/oshwc/cfoi/cfch0006.pdf
http://www.bls.gov/news.release/pdf/cfoi.pdf
http://stats.bls.gov/iif/oshwc/cfoi/cfch0006.pdf
http://stats.bls.gov/iif/oshwc/cfoi/cfch0006.pdf
OSHA and Pennsylvania OSHA and Pennsylvania Department of Education Department of Education Prepare Youth for Safe Prepare Youth for Safe
Work ExperienceWork Experience
Instructors Receiving Safety Training
0
20
40
60
80
100
Year
Inst
ruct
ors
500 Annual 20 30 20 23
501 Annual 15 22 26 20
500 Cumulative 20 50 70 93
501 Cumulative 15 37 63 83
2005 2006 2007 2008
http://www.pde.state.pa.us/career_edu/cwp/view.asp?a=112&Q=79383
• § 339.1a. Definitions.• (a) The definitions in § 4.3 (relating to definitions) apply
to this chapter. • (b) The following words and terms, when used in this
chapter, have the following meanings, unless the context clearly indicates otherwise:
Diversified occupations program—A planned vocational program, which may be offered at either the AVTS or a comprehensive high school. The program prepares students from more than one vocational education area of instruction for gainful employment. The program is a partnership between a local business and industry and the school entity. A full range of career competencies are developed at the job training station site. The school, in a classroom setting, provides related academic and technical instruction, including safety.
• § 339.3. Satellite program.• A satellite vocational education program is a program
established, maintained and administered by an area vocational-technical board in a participating school district facility as an integral part of the AVTS. The requirements for satellite programs are:
• (1) AVTS requirements. In school districts having approved satellite programs, the area vocational-technical board shall be required to:
• (i) Maintain school/industry articulation. • (ii) Supervise vocational student organization activities. • (iii) Conduct vocational advisory committee activities. • (iv) Periodically review vocational education program
needs in the attendance area and develop recommendations for continued growth and expansion of a coordinated vocational education system.
• (v) Develop recommendations that assist students in meeting their career needs without regard to sex, race or disability.
• (vi) Ensure that a program of safety is incorporated into the curriculum.
• § 339.23. Vocational education safety.
• Vocational education shall be provided consistent with safety standards in the following areas:
• (1) Safety instruction shall be practiced in the laboratory and classroom.
• (2) Equipment guards and personal safety devices shall be in place and used.
• (3) Class enrollment shall be safe relative to classroom or laboratory size and number of workstations.
• (4) Workstations shall be barrier-free, assuring accessibility and safety under section 504 of the Rehabilitation Act of 1973 (29 U.S.C.A. § 794) and 34 CFR 104.22(a) (relating to existing facilities) and the Americans With Disabilities Act of 1990 (42 U.S.C.A. § § 12101—12213).
• § 339.23. Vocational education safety. (cont.)
• (5) Provisions shall be made for safe practices to meet individual educational needs of handicapped persons under section 504 of the Rehabilitation Act of 1973, 34 CFR 104.33(b) (relating to free appropriate public education), OCR Guidelines, Title VI of the Civil Rights Act of 1964 (42 U.S.C.A. § § 2000d—2000d-4a) and 45 CFR Part 80 (relating to nondiscrimination under programs receiving Federal assistance through the Department of Health and Human Services effectuation of Title VI of the Civil Rights Act of 1964).
• (6) Storage of materials and supplies must meet 34 Pa. Code Part I (relating to Department of Labor and Industry).
• (7) Safety practices must meet State and Federal regulations.
FACILITIES§ 339.51. Learning environment. The requirements for the learning environment are as follows: (1) Size of laboratory. Shop laboratory size must be adequate as required by State licensing boards, accreditation providers and industry certification standards and take into consideration the recommendations of the occupational advisory committee. (2) Type of equipment. Refer to § 339.4(b)(5) (relating to program approval) for requirements related to equipment. (3) Number of workstations. Students assigned may not be greater than the number of workstations available. (4) Safety of students. Refer to § 339.23 (relating to vocational education safety) for safety of students requirements.
OSHA StandardsOSHA Standards29 CFR29 CFR
Part 1910 General Industry
Part 1917 Marine Terminals
Part 1918 Longshoring
Part 1915 Shipyards
Part 1908 Consultation
Part 1926 Construction
Part 1928 Agriculture
Part 1904 Recordkeeping
Part 1903 Inspections
5(a)(1)
Standards are Promulgated
Notice of Proposed Rulemaking or Advance Notice of Proposed Rulemaking
Draft Standard or Proposed Rule
Final Standard or Rule
1911 Rules of Procedure for Promulgating, Modifying or Revoking OSHA Standards
Origin of OSHA StandardsOrigin of OSHA Standards
Consensus - Industry-wide Organizations
ANSI or NFPA
Proprietary - Societies or Associations
Nat’l Grain Handlers AssociationCompressed Gas Association
Page 1
Code of Federal Regulations Code of Federal Regulations (CFR), Select Titles (1 – 50)(CFR), Select Titles (1 – 50)
Title 1 The President
Title 10 Energy (NRC)
Title 29 Labor (OSHA)
Title 30 Mineral Resources (MSHA)
Title 40 Protection of Environment (EPA)
Title 42 Public Health
Title 49 Transportation (DOT)
Parts of OSHA StandardsParts of OSHA Standards(Select Title 29 CFRs)(Select Title 29 CFRs)
1903 Inspections, Citations and Proposed Penalties
1904 Recording and Reporting Occupational Injuries and Illnesses
1908 Consultation Agreements1910 Occupational Safety and Health
Standards (General Industry)1917 Maritime1926 Safety and Health Regulations for
Construction1928 Agriculture
1910 General Industry 1910 General Industry SubpartsSubparts
Subpart D - Walking-Working SurfacesSubpart E - Means of EgressSubpart F - Powered Platforms & ManliftsSubpart G - Health/Environmental ControlSubpart H - Hazardous MaterialsSubpart I - Personal Protective EquipmentSubpart J - Environmental ControlsSubpart K - Medical and First Aid Subpart L - Fire Protection
1910 General Industry 1910 General Industry SubpartsSubparts
Subpart M - Compressed Gas and Air EquipmentSubpart N - Materials Handling and StorageSubpart O - Machinery and Machine GuardingSubpart P - Hand and Portable Powered ToolsSubpart Q - Welding, Cutting and BrazingSubpart R - Special IndustriesSubpart S - ElectricalSubpart T - Commercial Diving OperationsSubpart Z - Toxic and Hazardous Substances
1926 Construction Subparts1926 Construction SubpartsSubpart C - General Safety and Health ProvisionsSubpart D - Occupational Health and Environmental ControlsSubpart E - Personal Protective and Lifesaving EquipmentSubpart F - Fire Protection and PreventionSubpart G - Signs, Signals, and BarricadesSubpart H - Materials Handling, Storage, Use, and DisposalSubpart I - Tools – Hand and PowerSubpart J - Welding and CuttingSubpart K - ElectricalSubpart L - ScaffoldsSubpart M - Fall ProtectionSubpart N - Cranes, Derricks, Hoists, Elevators, and ConveyorsSubpart O - Motor Vehicles, Mechanized Equipment, and Marine
Operations
1926 Construction Subparts1926 Construction SubpartsSubpart P - ExcavationsSubpart Q - Concrete and Masonry ConstructionSubpart R - Steel ErectionSubpart S - Underground Construction, Caissons,
Cofferdams, and Compressed AirSubpart T - DemolitionSubpart U - Blasting and the Use of ExplosivesSubpart V - Power Transmission and DistributionSubpart W - Rollover Protective Structures:
Overhead ProtectionSubpart X - Stairways and LaddersSubpart Y - DivingSubpart Z - Toxic and Hazardous Substances
30
OSHA Most Frequently Cited OSHA Most Frequently Cited Serious ViolationsSerious Violations
General Industry - FY-2006
31
Most Frequently Cited Serious Violations Most Frequently Cited Serious Violations in General Industry in General Industry
FY 2006FY 20061418
1155
733
689
645
589
572
564
556
522
212(a)(1) - O
1200(e)(1) - Z
212(a)(3)(ii) - O
23(c)(1) - D
1200(h)(1) - Z
151(c) - K
147(c)(1) - J
215(b)(9) - O
147(c)(4)(i) - J
305(b)(1) - SSta
ndar
d &
Sub
part
: 19
10.
Machine Guards - General
Eye & Body Flushing Facilities
Point of OperationOpen-Sided Floors
Conductors Entering Cabinets/Boxes/Fittings Protected from Abrasion
Lockout/Tagout - Program
Grinders-Tongue Guards
Hazard Communication – Information & Training
Note: There were also 1222 Section 5(a)(1) General Duty Clause violations cited for all inspections during this period.
Lockout/Tagout - Procedures
Hazard Communication – Written Program
32
Subpart D - Walking/Working Subpart D - Walking/Working Surfaces (1910.21 - 30)Surfaces (1910.21 - 30)
689
249
132
97
83
23(c)(1)
22(a)(1)
22(a)(2)
24(h)
23(a)(8)
Open-sided floors
Housekeeping
Wet floors
Stair railings
Floor holes
Sta
nd
ard
: 19
10.
33
Subpart E – Exit Routes, Emergency Action Subpart E – Exit Routes, Emergency Action Plans, and Fire Prevention PlansPlans, and Fire Prevention Plans
(1910.33 - 39)(1910.33 - 39)
265
153
153
72
60
37(a)(3)
37(b)(2)
36(d)(1)
37(b)(4)
37(b)(5)
Exit route doors unlocked
Exit marking
Exit access signs
Sta
nd
ard
: 19
10.
“Not an Exit” signs
Exit routes free & unobstructed
34
Subpart F - Powered PlatformsSubpart F - Powered Platforms(1910.66 - 68)(1910.66 - 68)
127
13
8
67(c)(2)(v)
67(c)(2)(ii)
67(c)(2)(iv)
Trained operators for aerial lift
Sta
nd
ard
: 19
10.
Body belt & lanyard when working from aerial lift
Secure work position for employees in basket
35
Subpart G - Occupational HealthSubpart G - Occupational Health(1910.94 - 98)(1910.94 - 98)
202
87
86
83
59
95(c)(1)
95(k)(1)
95(g)(1)
95(d)(1)
95(b)(1)
Hearing conservation program
Administrative/Engineering controls
Sta
nd
ard
: 19
10.
Audiometric testing program
Training program
Monitoring program
36
Subpart H - Hazardous MaterialsSubpart H - Hazardous Materials(1910.101 - 126)(1910.101 - 126)
118
75
74
69
64
101(b)
107(b)(5)(i)
106(e)(6)(ii)
106(e)(6)(i)
107(c)(6)
Sta
nd
ard
: 19
10.
Spray booth – Air velocity
Class I liquids - Dispensing
Compressed gases - Handling, storage & use
Spray areas – Approved wiring & equipment
Sources of ignition - Precautions
37
Subpart I - Personal Protective Subpart I - Personal Protective Equipment (1910.132 - 139)Equipment (1910.132 - 139)
488
469
418
414
322
134(e)(1)
134(c)(1)
132(a)
133(a)(1)
132(d)(1)
Personal protective equipment
Eye & face protection
PPE hazard assessment
Sta
nd
ard
: 19
10. Written respiratory protection program
Medical evaluation to determine employee’s ability to use respirator
38
Subpart J - General Environmental Subpart J - General Environmental Controls (1910.141 - 147)Controls (1910.141 - 147)
572
556
448
342
188
147(c)(1)
147(c)(4)(i)
147(c)(7)(i)
147(c)(6)(i)
147(c)(4)(ii)
Lockout/Tagout - Program
Lockout/Tagout - Training
Lockout/Tagout - Procedures
Lockout/Tagout - Content of energy control procedures
Sta
nd
ard
: 19
10.
Lockout/Tagout procedure - Periodic inspection
39
Subpart K - Medical & First AidSubpart K - Medical & First Aid(1910.151 - 152)(1910.151 - 152)
589
55
151(c)
151(b)
Eye & body flushing facilities
First aid
Sta
nd
ard
: 19
10.
40
Subpart L - Fire ProtectionSubpart L - Fire Protection(1910.155 - 165)(1910.155 - 165)
158
158
125
70
62
157(g)(1)
157(g)(2)
157(c)(1)
157(c)(4)
157(e)(3)
Extinguishers - Training program
Extinguishers - Initial & annual training
Extinguishers - Provided & accessible
Sta
nd
ard
: 19
10.
Extinguishers - Annual checks
Extinguishers – Charged & operable
41
Subpart M - Compressed Gas & Air Subpart M - Compressed Gas & Air Equipment (1910.166 - 169)Equipment (1910.166 - 169)
8
3
169(b)(3)(i)
169(b)(3)(iv)
Pressure gage/safety valve
Safety valves tested
Sta
nd
ard
: 19
10.
42
Subpart N - Materials Handling & Subpart N - Materials Handling & Storage Storage (1910.176 - 184)(1910.176 - 184)
454
273
199
184
158
178(l)(1)(i)
178(p)(1)
176(b)
178(l)(6)
178(q)(7)
Sta
nd
ard
: 19
10.
Powered Industrial Trucks – Operator competency
Powered Industrial Trucks – Safe operating condition
Secure storage
Powered Industrial Trucks – Operator certification
Powered Industrial Trucks – Examination for defects
43
Subpart O - Machinery & Machine Subpart O - Machinery & Machine Guarding (1910.211 - 219)Guarding (1910.211 - 219)
1418
733
564
473
395
212(a)(1)
212(a)(3)(ii)
215(b)(9)
219(d)(1)
215(a)(4)
Machine guards - General
Grinders - Tongue guards
Pulleys
Point of operation
Grinders - Work rests
Sta
nd
ard
: 19
10.
44
Subpart P - Hand & PortableSubpart P - Hand & PortablePowered Tools (1910.241 - 244)Powered Tools (1910.241 - 244)
409
33
27
25
242(b)
243(c)(1)
243(c)(3)
242(a)
Compressed air for cleaning
Portable grinders - Guards
Sta
nd
ard
: 19
10.
Condition of tools & equipment
Portable grinders - General
45
Subpart Q - Welding, Cutting & Subpart Q - Welding, Cutting & Brazing (1910.251 - 255)Brazing (1910.251 - 255)
202
110
78
50
40
253(b)(4)(iii)
253(b)(2)(ii)
252(b)(2)(iii)
254(d)(9)(iii)
253(b)(2)(iv)
Oxygen cylinder storage - Separation
Cylinder storage - Inside of buildings
Protection from arc welding rays
Valve caps in place
Arc welding/cutting - Maintenance of cables
Sta
nd
ard
: 19
10.
46
Subpart R - Special IndustriesSubpart R - Special Industries(1910.261 - 272)(1910.261 - 272)
64
60
43
42
41
266(d)(1)(v)
266(i)(1)
266(i)(10)(i)
266(i)(7)(ii)
266(d)(1)(vii)(B)
Sta
nd
ard
: 19
10.
Logging – Foot protection
Logging - First aid/CPR training current
Logging – Written certification of training
Logging – Face protection
Logging – Employee training
47
Subpart S - ElectricalSubpart S - Electrical(1910.301 - 399)(1910.301 - 399)
522
425
364
357
287
305(b)(1)
305(b)(2)
303(b)(2)
303(g)(2)(i)
304(f)(4)
Live parts
Grounding path
Electrical box covers
Conductors entering cabinets/boxes/fittings protected from abrasion
Sta
nd
ard
: 19
10.
Proper installation & use of equipment
48
Subpart Z - Toxic & Hazardous Subpart Z - Toxic & Hazardous Substances (1910.1000 - 1450)Substances (1910.1000 - 1450)
645
349
348
255
11551200(e)(1)
1200(h)(1)
1200(h)
1200(g)(1)
1200(f)(5)(i)
Hazard Communication - Written program
Hazard Communication - Information & training
Hazard Communication - Label identification
Hazard Communication - Training initially & for new hazards
Hazard Communication - Material Safety Data Sheets
Sta
nd
ard
: 19
10.
Workers Compensation Workers Compensation InsuranceInsurance
• No fault remedy
• State specific law
• Purchased from carriers/state
Hazard RecognitionHazard Recognition• Employer evaluation• Self inspection / evaluation• What is right from wrong• Should not have to expose yourself to a
hazard• Common Sense, If it doesn’t feel right• Tools to help when it is not obvious• Can always ask if not sure• Take care of yourself and others.
STARSTAR
• STOP
• THINK
• ACT
• RE-EVALUATEor Review
Overhead #15
Controlling HazardsControlling Hazards
Removethe Hazard(e.g., use safer
chemicals)
Work Policies and Procedures
(e.g., assign enough people to do the job)
Personal Protective Equipment (e.g., wear gloves, use a respirator)
Training
JOB SAFETY ANALYSISJOB: Sawing a board AUTHORIZED BY: DBG DATE: 3 Sept 2008
TASK HAZARD CONTROL
1. Stand in front of the saw table
2
REQUIRED TRAINING: REQUIRED PPE:
JOB SAFETY ANALYSISJOB: Sawing a board AUTHORIZED BY: DBG DATE: 3 Sept 2008
TASK HAZARD CONTROL
1. Stand in front of the saw table
2
REQUIRED TRAINING: REQUIRED PPE:
1a. Tripping on Debris
1b. Slipping on the floor while cutting
JOB SAFETY ANALYSISJOB: Sawing a board AUTHORIZED BY: DBG DATE: 3 Sept 2008
TASK HAZARD CONTROL
1. Stand in front of the saw table
1a. Tripping on Debris
1b. Slipping on the floor while cutting
2
REQUIRED TRAINING: REQUIRED PPE:
1b-1. Wear non-slip shoes
1b-2. Keep the floor dry
1b-3. Keep a rubber mat in front of the saw.
1a-1. Clear the floor
JOB SAFETY ANALYSISJOB: Sawing a board AUTHORIZED BY: DBG DATE: 3 Sept 2008
TASK HAZARD CONTROL
1. Stand in front of the saw table
1a. Tripping on Debris 1a-1. Clear the floor
1b. Slipping on the floor while cutting
1b-1. Wear non-slip shoes
1b-2. Keep the floor dry
1b-3. Keep a rubber mat in front of the saw.
2
REQUIRED TRAINING: REQUIRED PPE:
Use of the Saw
Lock out tag out
JOB SAFETY ANALYSISJOB: Sawing a board AUTHORIZED BY: DBG DATE: 3 Sept 2008
TASK HAZARD CONTROL
1. Stand in front of the saw table
1a. Tripping on Debris 1a-1. Clear the floor
1b. Slipping on the floor while cutting
1b-1. Wear non-slip shoes
1b-2. Keep the floor dry
1b-3. Keep a rubber mat in front of the saw.
2
REQUIRED TRAINING: REQUIRED PPE:
Use of the Saw
Lock out tag out
Eye Protection
Hearing Protection
JOB SAFETY ANALYSISJOB: Sawing a board AUTHORIZED BY: DBG DATE: 3 Sept 2008
TASK HAZARD CONTROL
1. Stand in front of the saw table
1a. Tripping on Debris 1a-1. Clear the floor
1b. Slipping on the floor while cutting
1b-1. Wear non-slip shoes
1b-2. Keep the floor dry
1b-3. Keep a rubber mat in front of the saw.
REQUIRED TRAINING: REQUIRED PPE:
Use of the Saw Eye Protection
Lock out tag out Hearing Protection
Repeat for Step 2, and so forth
Picture of Student Shop JSAsPicture of Student Shop JSAs
http://www.osha.gov/Publications/osha3071.pdf
Top 10 most frequently cited Top 10 most frequently cited standards in fiscal year 2007standards in fiscal year 2007
1. Scaffolding, general requirements, construction (29 CFR 1926.451) 2. Fall protection, construction (29 CFR 1926.501)3. Hazard communication standard, general industry (
29 CFR 1910.1200)4. Control of hazardous energy (lockout/tagout), general industry (
29 CFR 1910.147) 5. Respiratory protection, general industry (29 CFR 1910.134)6. Powered industrial trucks, general industry (29 CFR 1910.178) 7. Electrical, wiring methods, components and equipment, general
industry (29 CFR 1910.305)8. Ladders, construction (29 CFR 1926.1053)9. Machines, general requirements, general industry (
29 CFR 1910.212)10.Electrical systems design, general requirements, general industry (
29 CFR 1910.303)
OSHA assessed the highest OSHA assessed the highest penalties in fiscal year 2007penalties in fiscal year 2007
1. Scaffolding, general requirements, construction (29 CFR 1926.451)
2. Fall protection, construction (29 CFR 1926.501)3. Control of hazardous energy (lockout/tagout), general industry (
29 CFR 1910.147)4. Excavations, requirements for protective systems, construction (
29 CFR 1926.652)5. Machines, general requirements, general industry (
29 CFR 1910.212)6. General duty clause (Section 5(a)(1) of the OSH Act) 7. Powered industrial trucks, general industry (29 CFR 1910.178) 8. Excavations, general requirements, construction (
29 CFR 1926.651)9. Aerial lifts (29 CFR 1926.453) 10.Guarding floor and wall openings and holes, general industry (
29 CFR 1910.23)
Elements of a Comprehensive Elements of a Comprehensive Safety and HealthSafety and Health
Management SystemManagement System
• Management Leadership and Employee Involvement
• Worksite Analysis
• Hazard Prevention and Control
• Safety and Health Training
http://www.osha.gov/dcsp/smallbusiness/consult_directory.html
Consultation reports generated: September 30, 2006 – Parameters: Private Sector, Closing Conference Date: October 1, 2005 – September 30, 2006
* Total includes 21(d) and 23(g) Consultation Project data
Consultation Visits (32,515*) by Industry SectorFY 2006
Services6,07119%
Wholesale & Retail2,6248%
Agriculture8313% Manufacturing
12,04337%
Construction8,88227%
Other2,0646%
• Aimed to help employers who want help in recognizing and correcting safety and health hazards and in improving their safety and health programs.
• Free, largely funded by OSHA
• Requirement: A commitment to correcting serious safety and health hazards
• Confidential, tailored to small business
OSHA Consultation ServiceIndiana University of Pennsylvania
• Safety and Health Achievement Recognition Program (SHARP)
• Contact Information:
1 – 800 – 382 – 1241
www.hhs.iup.edu/sa/osha
OSHA Consultation ServiceIndiana University of Pennsylvania
Screen capture of OSHA’s Training and Education Web page
Training and Education ResourcesTraining and Education Resources
After more than three decades, OSHA continues to offer extensive After more than three decades, OSHA continues to offer extensive printed, electronic and face-to-face guidance to assist employers with printed, electronic and face-to-face guidance to assist employers with all of their safety and health needs. For example, OSHA offers a free all of their safety and health needs. For example, OSHA offers a free on-site consultation program to assist small businesses seeking to on-site consultation program to assist small businesses seeking to create and implement a safety and health program. In addition, the create and implement a safety and health program. In addition, the agency offers more than a dozen product lines to help keep employers agency offers more than a dozen product lines to help keep employers and employees up-to-date on the latest issues in workplace safety and and employees up-to-date on the latest issues in workplace safety and health. Our products include booklets, Pocket Guides and fact sheets, health. Our products include booklets, Pocket Guides and fact sheets, public service announcements, an electronic newsletter, and the public service announcements, an electronic newsletter, and the OSHA website. The good news is this: it is all free.OSHA website. The good news is this: it is all free.
OSHA is committed to providing employers and employees with free OSHA is committed to providing employers and employees with free and easy-to-read products. Our printed products are available simply and easy-to-read products. Our printed products are available simply by visiting OSHA’s publications page on the agency’s website at by visiting OSHA’s publications page on the agency’s website at www.osha.govwww.osha.gov or they may be ordered through the OSHA publications or they may be ordered through the OSHA publications office at 202-693-1888 from 9 a.m. – 5 p.m. (ET) Monday – Friday.office at 202-693-1888 from 9 a.m. – 5 p.m. (ET) Monday – Friday.(202) 693-1888
OSHA Product Lines and Services
OSHA RESOURCES
Harrisburg Area Office:
• Full service area office
• Publications
• Audiovisual aids
• Technical assistance / Duty Officer
• Compliance Assistance
Pennsylvania OSHA Area OfficesPennsylvania OSHA Area Offices
Allentown Area Office(610) 776-0592
Erie Area Office(814) 461-1492
Harrisburg Area Office(717) 782-3902
Philadelphia Area Office
(215) 597-4955Pittsburgh Area Office
(412) 395-4903Wilkes-Barre Area
Office(570) 826-6538
Main OSHA Number: 1-800-321-OSHA,
1-800-321-6742Rev: 22 Sept 2006
Harrisburg Area OfficeHarrisburg Area Office(717) 782-3902(717) 782-3902
Duty Officer Hours Duty Officer Hours 8:00 am - 4:30 pm8:00 am - 4:30 pm
Web Site: Web Site: www.osha.govNational Call Center: (800) 321-OSHANational Call Center: (800) 321-OSHA
Additional Assistance
Questions and Answers
top related