persas underground catalogue
Post on 07-Apr-2016
261 Views
Preview:
DESCRIPTION
TRANSCRIPT
1
P NE U M
A T I C E QU I P M
E NT R E P A I R S A L E S & S E R V I C E
UNDERGROUND TOOL
CATALOGUE
2014
2 3
Impact Wrenches7 Winches
22
Ratchet Wrenches8 Hoists
23
Drills
9 Lifting Bags
24
Cutting Tools
10 Starting Systems
26
Grinding Tools
12 Flow Meters27
Lubrication
16 Roof Bolters28
Chippers and Breakers
18 Accessories
30
Pneumatic Torque Tools
20 Air Preparation
34
Diaphragm Pumps22 Hydraulic Eq
uipment36
Pneumatic Fans23 Impact Sockets
32PERSAS have been providing industry with specialist equipment such as pneumatic starting systems,
pneumatic tools, torque tools, hydraulic cylinders and pumps, pres- sure cleaners, lubrication and
automation equipment since 1985.
Based in Rutherford NSW, we have representatives covering a large portion of NSW including Sydney,
Mudgee, Lithgow, Narrabri, Great Lakes,Tamworth, Central Table Lands, NW Slopes and Plains, Mid North
Coast Lake Macquarie, Newcastle and the Hunter Valley.
Our service and commitment to our customers is second to none.
Our specialised showroom highlights a substantial part of our product portfolio. We have highly experienced
staff selling only the most appropriate tool for the job.
We stock a wide range of equipment to suit the mining, construction, railway, automation,
agricultural,engineering and civil industries including pneumatic starting systems, pneumatic tools, torque
tools, hydraulic cylinders and pumps, pressure cleaners, lubrication and automation equipment.
Our ability to service what we sell, as well as identify and correct any problems a client may have is one of
our great strengths.
CONTENTS
Visit our website www.airtools.com.au for more information.
4 5
PERSAS operates a fully equipped workshop repair facility, using the latest state of the art testing equip- ment and techniques carries out by trained and qualifies technicians.The facility has been developed to provide a high level of customer sup- port and satisfaction. Its ranges of service includes everything from repair and rebuild to service ex- change products, hire and more.Our testing facilities include a compre- hensive calibration service for hand, pneumatic and hydraulic torque tools.All impact wrenches up to 1 1/2” are torque tested on calibrated Skidmore-Wilhelm testing machines and returned with a test certificate.Starter motors are bench tested to en- sure they perform first time every time.State of the art testing equipmentOur investment in the most advanced testing facilities gives our customers the peace of mind that all equipment is returned to site guaranteed to work to OEM standards.PERSAS technicians are certified with product and technical know how and decades of experience
PERSAS offer on site inspection, testing and calibration of pneumatic and hydraulic tools and equipment as well as testing and calibration of manual and pneumatic torque tools.
PERSAS can also set up and maintain a tool registry for clients, all equipment tested is then tagged, certified and logged.
OUR WORKSHOP ONSITE TESTING
6 7
UIW260 2145QIMAXSP
2155QIMAXSP2131PSP
2940B2SPEU
IMPACT WRENCHES IMPACT WRENCHESSquare drive 1/2
Free speed 7500rpm
Torque Range 50-600 ft.-ibs
Hose size 3/8
Air Inlet 1/4
Length 190mm
Weight 2Kg
Air Pressure 90 psi
UIW278F
Square drive 3/4Free speed 5500rpm
Torque Range 200-1100 ft.-ibsHose size 1/2Air Inlet 1/4Length 230mmWeight 4Kg
Air Pressure 90 psi
Square drive 1/2″Torque 600ft.-ibs
Hose size 1/2Air Inlet 1/4Length 180mmWeight 2kg
Square drive 3/4Free speed 5500rpm
Torque Range 200-1350 ft.-lbsHose size 1/2Air Inlet 3/8Length 208mmWeight 3.2Kg
Air Pressure 90 psi
Square Drive 1″Free Speed 8000rpm
Torque 1350 ft-blsHose Size 1/2″Air Inlet 3/8″Length 208mmWeight 3.4kg
Square drive 1″Torque Range 1600-2000 ft-lbs
Hose size 3/4Air Inlet 1/2Length 400mmWeight 10Kg
Air Pressure 90 psiHigh torque tool for longwall applications
Leightweight tool perfect for development work HIRE
HIRE
HIRE
HIRE
HIRE
HIRE
RATCHET WRENCHES DRILLS
URW107A
Keyed chuck also available. UDP12212K
8 9
URW103A
URW207A
UDP12212
UDP38213
MP-8375-STUG
Square drive 3/8Free speed 250 rpm
Torque Range 25 ft.-ibsHose size 3/8Air inlet 1/4Length 162mmWeight 0.5Kg
Air Pressure 90 psi
Square drive 3/8Free speed 175 rpm
Torque Range 50 ft.-ibsHose size 3/8Air inlet 1/4Length 265mmWeight 1.17Kg
Air Pressure 90 psi
Square drive 1/2Free speed 175rpm
Torque Range 50 ft.-ibsHose size 3/8Air Inlet 1/4Length 265mmWeight 1.17Kg
Air Pressure 90 psi
Square drive 10mmFree speed 2200rpmHose size 3/8Air Inlet 1/4Length 160mmWeight 1.3Kg
Air Pressure 90 psi
Square drive 12mmFree speed 500rpmHose size 3/8Air Inlet 1/4Length 170mmWeight 1.4Kg
Air Pressure 90 psi
Free Speed 800Chuck size 5/8 16mm
Spindle Thread 1/2-20Power 820W
Air Inlet 3/8Length 320mmWeight 3.2kg
HIRE
Keyed chuck also available. UDP38213K
DRILLS DRILLS
BBD94WS
F IV
ALF72D
Capacity 5/8hLength 350mmWeight 13kg
Air Pressure 90psi
Free Speed 160rpmAir Consumption 28cfm
Capacity 52x50mmHeight 540mmWeight 20kgTorque 27 ft/lb
Weight 19kgLength Extracted 3270mmLength Retracted 1970mm
10 11
224040010
213100010
Free Speed 250rpmBlows per/min 2500
Power 1.2kwLength 490mmWeight 15.8kg
Hose Size 1/2
Air Pressure 60—100 psiMotor Rating 2.5 kW
Rotational Speed 1,000 rpmNominal Torque 24 NmStarting Torque 42 NmNoise Emission 91 dB(A)
Gear Lock Manual
Weight 28 kgLength 670 mm
Air consumption 97 l/sImpact Rate 3300 blows/min
Hole diameter 27 - 41 mmVibration 3 axes 15 m/s²
Sound 125 dB(A)Shank Size (mm) 22x108
RD-130Ch
HIRE
HIRE
HIRE
HIRE
HIRE
HIRE More sizes availableh
Integral steels also availableUses SDS Max Drill bits, available in store
Cutting bits and pins also available
Width of Cut 4″Depth of curt 4″
Hose size 3/8Air Inlet 1/4
Air Pressure 90 psi
Width of Cut 7″Depth of curt 7″
Hose size 3/8Air Inlet 1/4
Air Pressure 90 psi
Strockes Per Min 330Lenghth of stroke 2-3/8
Capacity 24″Air Inlet 1/2Length 650mmWeight 10.6kg
Air Pressure 90 psi
Genuine blade part # 925060020Non-Genuine blade part # Genuine blade part # h
Genuine blade part # h
CUTTING TOOLS CUTTING TOOLS
Genuine blade part # 925060020Non-Genuine blade part #
12 13
560310010
560300010
512180010
512130010
CS17
Strockes Per Min 330Power 6 HP
Air Consumption 110 CFMChain 17”
Hand Guard YesNose Guard YesAir Pressure 90 psi
HIRE
HIRE HIRE
HIRE
Strockes Per Min 1800Lenghth of stroke 1-1/8
Hose size 1/2Air Inlet 1/2Length 400mm
>Weight 6.90kg
Width of Cut 4″Depth of curt 4″
Hose size 3/8Air Inlet 1/4
Air Pressure 90 psi
Our reinforced 4” bandsaw for added drability.560300010R
HIRE
Capacity 1/4″Free speed 22000rpmHose size 3/8Air Inlet 1/4Length 152mmWeight 0.45Kg
Air Pressure 90 psi
GRINDING TOOLS GRINDING TOOLS
Capacity 1/4″Free speed 22000rpmHose size 3/8Air Inlet 1/4Length 152mmWeight 0.45Kg
Air Pressure 90 psi
HIRE
HIRE
HIRE
HIRE
14 15
MP-9113E-14
UDG14061
Capacity 1/4”Free speed 25000rpm
Power 1hp
MP11650AUST
MP3040AUST
MP9115EW
Capacity 4”Free speed 13500rpm
Power 1hp
Capacity 5”Free speed 11000rpm
Power 1hp
Capacity 3”Free speed 18000rpm
Power 1hp
Lightweigh polycarbonate body
Robust all steel body
Robust all steel body
Robust all steel body
Robust all steel body
Ratio 5:1Delivery max 11L/min
Inlet 1"Outlet 1/2"
Suitable For up to SAE140Construction Zinc
Output 100ml/strokeHose Length 1.8m
Compatible With 15-25L drum
LUBRICATION LUBRICATION
Construction ZincDelivery Pressure 10000psi
Outlet Hose 230mmCompatible With 450g cartridge
16 17
K450111
K290111
P301C
T512SO111
C7Z01
Construction ZincDelivery Pressure 12000psi
Outlet Hose 150mmCompatible With 450g cartridge
Ratio 50:1Max Gun Output 10000psiCompatible With 20kg pailMax Air Pressure 150psiMin Air Pressure 60psi
Air Inlet 1/4"Pump Outlet 1/4"
INTRODUCING THE MOST INNOVATIVE AND DURABLE OVAL GEAR FLOW METER EVER BUILT.
The MX Series™ has been
designed to maximise
uptime. The direct result of
more than 40 years experience
in flow measurement, the
MX Series™ is true Australian
innovation that sets a new
benchmark for reliability.
Using proven technology and
a revolutionary modular design,
this is the most advanced oval
gear flow meter available.
MX Series™
CONTACT US TODAY TO DISCUSS YOUR NEEDS
HIRE
HIRE
HIRE
HIRE
HIRE
HIRE
CHIPPERS AND BREAKERS
HIRE
HIRE
HIRE
CHISEL AND MOIL POINTS
FRAS silencer available. Part #
FRAS silencer available. Part #
Part #Working Length (mm)
Tip Width (mm)
Part #Working Length (mm)
Tip Width (mm)
Part #
3083322000 240 - 3083324200 380 - 30833271003083322100 440 - 3083405010 450 - 3083327200
3083324300 1000 - 3083327300
3083322200 240 22 3083324400 380 25 30833274003083322300 440 22 3083405110 450 25 3083327500
3083324500 1000 25 3083327600
3083322400 240 60 3083324600 380 75 3083327700
- - - 3083306900 380 125 3083327800
- - - 3083324700 380 75 3083327900
- - - 3083324800 380 120 3083328000
- - - 3083324900 430 125 3083328100
Application Guide
Moil Point Breaking in concrete materials (no line of fracture), making holes in hard materials
Narrow Chisel Breaking in concrete materials. General purpose tool that controls the line of fracture
Wide Chisel Suitable for medium hard to hard asphalt
Asphalt Cutter Hot rolled asphalt, gives a straight and clean cutting edge
Digging Chisel Loosen material prior to excavation where the ground conditions are difficult
Digging Spade Cutting asphalt or loosen material prior to excavation
Clay Spade Heavy dense clay. The scooped, curved profile gives efficient cutting
Tools with shape or dimensions not appearing in this catalogue can be supplied upon request.
Digging Chisel
Digging Spade
Clay Spade
Wide Chisel
19 x 50mm (3/4" x 2")
Narrow Chisel
Asphalt Cutter
22 x 82.5 (7/8" x 3 1/4") 28 x 160mm (1 1/8" x 6 1/4")
Type of Working End Description
Moil Point
18 19
Tool Shank 19 x 50mmWeight 5.5kg
Air Consumption 9.5 l/sLength 380mm
Tool Retainer cap
TEX12PSKL
TEX05P
TEX280PE
Tool Shank 22 x 82.5Weight 12.3kg
Air Consumption 21.3 l/sLength 545mm
Tool Retainer kick-latch
Tool Shank 28 x 160Weight 31.5kg
Air Consumption 32 l/sLength 690mm
Tool Retainer kick-latch
FRAS silencer available. Part #
For use on ........
20 21
P T - PT5UG
HT52UGPTM922700UG
HT72UG
PNEUMATIC TORQUE MULTIPLIERS TORQUE MULTIPLIERSSquare drive 1”
Torque Range 400-2000Nm
Speed 70rpm
Weight 6.5kg
PTM924500UG
Square drive 1 1/2”Torque Range 900-4500Nm
Speed 32rpmWeight 12.5Kg
Square drive 1″Torque Range 540-2700Nm
Speed 57rpmWeight 8.5kg
HIRE
HIRE
HIRE
HIRE
For use on .......Lubro control units also available, see page 35
For use on .......Lubro control units also available, see page 35
For use on .......Lubro control units also available, see page 35
Square drive 1″Torque Range 880-3400Nm
Speed 5rpmWeight 14kg
Square drive 3/4″Torque Output 1000Nm
Ratio 22:1Weight 1.4kg
Square drive 1″Torque Output 2000Nm
Ratio 5:1Weight 2.4kg
Perfect for those hard to reach places
22 23
TYPHOON600
JETFLOW
GB7
DIAPHRAGM PUMPS FANS AND PUMPS
Fan Diamater 600mmHousing Diamater 700mm
Length 300mmAir Inlet 3/4Weight 35kg
Air Pressure 100 psi
Inlet Pressure 60psiDecibals 86.8
Flow 30m/secDynamic Pressure 50psi
Weight 9kg
Output water 53 l/minOutput Grout 23 l/min
HIRE
HIRE
HIRE
Pump Body Materials
316 Stainless Steel Iron GF Polypropylene Kynar (PVDF)
Elastomer Options
Teflon Buna-Nitrile Neoprene Saniflex (FDA) Wilflex (thermoplastic) EPDM (Nordel)
Wilden air operated diaphragm pumps are a recognized brand throughout the pumping industry. With a staggering range of diaphragm pump options, excellent support, and a proven track record in the diaphragm pump world, there are few industries that have not used a Wilden pump at some stage.
Wilden diaphragm pumps are avaiable in sizes starting from ¼” and range up to mam-moth 4” units. These pumps are generally used in the transfer of chemicals, drainage ap-plications, and food product transfer. Wilden diaphragm pumps can be dry-run indefinately without suffering any damage. As with most diaphragm pumps, self priming is also not an issue, with up to 7 metres suction lift availalbe on some models.
What makes these pumps so popular is their versatility, with a wide combination of body materials and elastomers avaialble, there are few combinations that cannot be supplied to suit a wide range of chemicals. Body materials include; polypropylene, kynar (PVDF), 316 Stainless Steel, aluminium, and cast iron. The ability to handle both thin and viscous liq-uids, even with suspended solids is also an advantage that many clients find useful.
A wide range of air systems are also now available. The standard Pro-Flo (P series) se-ries pump utilises a lubrication free, anti-stalling air system, while the newer Pro-FloX (PX Series) features an integrated adjustment valve to maximise pump efficiency for your ap-plication. The Pro-FloV Advanced (PV Advanced series) pump features bolted configuration of the pump body (instead of clamp bands) for superior leak protection, combined with an efficient lubrication free, anti-stalling air system.
Performance data - Maximum flow rates ¼” Pumps: Flows to 18.5 litres/minute ½” Pumps: Flows to 59 litres/minute 1” Pumps: Flows to 132 litres/minute 1½” Pumps: Flows to 306 litres/minute 2” Pumps: Flows to 590 litres/minute 3” Pumps: Flows to 918 litres/minute 4” Pumps: Flows to 878 litres/minute
Common fluid connection options BSP & NPT threaded ANSI 150 flanged Tri-clover ferrules
WINCHES HOISTS
Footer 21
21
Air
Ch
ain
H
oist
s
ingersollrandproducts.com/lifting
7700 Series and 7790 Series Specifications
Model
Capacity
# Falls
Hook MountHeadroom
Trolley MountHeadroom
Lifting Speed Lowering SpeedChainSize
Chain Weight (per foot of lift)
Net Weightw/10 ft of Liftmetric
tonsRated Load No Load Rated Load No Load
lb in mm in mm ft/min m/min ft/min m/min ft/min m/min ft/min m/min lb kg lb kg
7770E 275 0.125 1 17 431.8 16.9 429.3 110 33.5 192 58.5 275 83.8 159 48.5 0.25 x 0.75 0.6 0.3 41 18.6
7718E 550 0.25 1 17 431.8 16.9 429.3 82 25 184 56.1 224 68.3 153 46.6 0.25 x 0.75 0.6 0.3 41 18.6
7756E 1,100 0.50 1 17 431.8 16.9 429.3 41 12.5 72 22 112 34.1 60 18.3 0.25 x 0.75 0.6 0.3 41 18.6
7776E 2,200 1 2 21.7 551.2 20.5 520.7 21 6.4 36 11 56 17.1 30 9.1 0.25 x 0.75 1.7 0.5 53 24
7790A 2,200 1 1 18.9 480.1 15 381 26 7.9 37 11.3 44 13.4 31 9.5 0.312 x 0.858 0.9 0.4 62 28.1
7792A 4,400 2 2 22.4 569 18 457.2 12 3.7 20 6.1 24 7.3 17 5.2 0.312 x 0.858 1.8 0.8 81 36.7
Working pressure from 5 to 7 bar (70 to 100 psi). Air consumption @ rated load - all models 1.98 m (70 cfm). Air inlet 1/2” NPT. Sound level 85 dBA.
Trolley Mount Specifications
Model Trolley type
Capacity metric tons
MinimumHeadroom
Trolley Speed atRated Load
Air Consumption @ Rated Load
Trolley Flange Adjustment
Minimum Curve Radius Air Inlet
Net Weightw/10 ft of Lift
in mm ft/min m/min ft3/min m3/min in mm ft m lb kg
7770E Plain 0.125 17 432 - - - - 2.66-12 68-305 3.5 1.1 - 88 40
Geared 0.125 17 432 - - - - 2.66-12 68-305 3.5 1.1 - 91 41
Motor 0.125 17 432 96 30 35 1 2.66-12 68-305 3.5 1.1 1/4 94 13
7718E Plain 0.25 17 432 - - - - 2.66-12 68-305 3.5 1.1 - 88 40
Geared 0.25 17 432 - - - - 2.66-12 68-305 3.5 1.1 - 91 41
Motor 0.25 17 432 95 29 35 1 2.66-12 68-305 3.5 1.1 1/4 94 43
7756E Plain 0.50 17 432 - - - - 2.66-12 68-305 3.5 1.1 - 88 40
Geared 0.50 17 432 - - - - 2.66-12 68-305 3.5 1.1 - 91 41
Motor 0.50 17 432 95 29 35 1 2.66-12 68-305 3.5 1.1 1/4 94 43
7776E Plain 1 22 559 - - - - 3.25-12 82-305 3.5 1.1 - 100 45
Geared 1 22 559 - - - - 3.25-12 82-305 3.5 1.1 - 103 47
Motor 1 22 559 93 28 35 1 3.25-12 82-305 3.5 1.1 1/4 106 48
7790A Plain 1 15 381 - - - - 3.00-12 76-305 3.5 1.1 - 104 47
Geared 1 15 381 - - - - 3.00-12 76-305 3.5 1.1 - 107 49
Motor 1 15 381 93 28 35 1 3.00-12 76-305 3.5 1.1 1/4 110 50
7792A Plain 2 20 508 - - - - 3.00-12 76-305 3.5 1.1 - 123 56
Geared 2 20 508 - - - - 3.00-12 76-305 3.5 1.1 - 126 57
Motor 2 20 508 80 24 35 1 3.00-12 76-305 3.5 1.1 1/4 129 59
Working pressure from 5 to 7 bar (70 to 100 psi).
Continuous heavy-duty applications7700 Series — 500 to 1,500 lb capacities
7790 Series — 1,500 to 3,000 lb capacities
7700 Series and 7790 Series spark-resistant hoists are designed for Division 1 applications where, under normal operating conditions, the atmosphere contains hazardous concentrations of flammable gases, dust, or other materials.
Specifically engineered for continuous heavy-duty industrial applications — between 500 and 3,000 lb — Ingersoll Rand 7700 Series and 7790 Series spark-resistant hoists are available with bronze top-hook or trolley adapter suspension. These hoists come complete with 10 feet of standard lift and 6 feet of either pendent control or pull-chain control.
Features• Stainless steel load chain and solid bronze hooks prevent accidental sparking
• Pendent control handles, when ordered, are covered with an industrial-grade vinyl grip; pull-chain controls come standard with zinc-plated pull chain
• Hoist capacities are reduced and speed adjustments are locked into place to maximize chain life
• Trolley models are supplied with bronze wheels
Division 1 and 2 applicationsThe following definitions may be used as a guide. The actual division distinction for each application must be determined by your local inspecting authority.
Division 1 (spark-resistant air hoists are required)
Atmospheres containing hazardous concentrations of flammable gases, dusts, or fibers; continuously, frequently, or periodically; under normal operating conditions.
Division 2 (standard air hoists are required)
Normally non-hazardous atmospheres in which a hazardous concentration of flammable gases, dusts, or fibers occurs when a container or handling system fails or the ventilating system that normally keeps the concentration non-hazardous fails.
7700 Series and 7790 Series link chain hoistsSpark-resistant models
7700 Series and 7790 Series Spark-resistant Specifications
Model
Capacity
# Falls
Hook MountHeadroom
Trolley MountHeadroom
Lifting Speed Lowering SpeedChainSize
Chain Weight (per foot of lift)
Net Weightw/10 ft of Liftmetric
tonsRated Load No Load Rated Load No Load
lb in mm in mm ft/min m/min ft/min m/min ft/min m/min ft/min m/min lb kg lb kg
7712EL 550 0.25 1 17 431.8 17.1 434.3 50 15.2 80 24.4 70 21.3 53 16.2 0.25 x 0.75 0.6 0.3 41 18.6
7714EL 1,500 0.68 2 22.7 576.6 21.3 541 16 4.9 26 7.6 16 4.9 12 3.7 0.25 x 0.75 1.2 0.6 48 21.8
7796AL 1,500 0.68 1 18.9 480.1 15 381 16 4.9 26 7.6 16 4.9 12 3.7 0.312 x 0.858 0.9 0.4 62 28.1
7798AL 2,400 1.1 2 22.4 569 18 457.2 12 3.7 19 5.8 12 3.7 9 2.7 0.312 x 0.858 1.9 0.9 81 36.7
7799AL 3,000 1.36 2 22.4 569 18 457.2 7 2.1 11 3.4 7 2.1 5 1.5 0.312 x 0.858 1.9 0.9 81 36.7
Working pressure from 5 to 7 bar (70 to 100 psi). Air consumption @ rated load - all models 1.98 m (70 cfm). Air inlet 1/2” NPT. Sound level 85 dBA.
Trolley Mount Specifications
Model Trolley type
Capacity metric tons
MinimumHeadroom
Trolley Speed atRated Load
Air Consumption @ Rated Load
Trolley Flange Adjustment
Minimum Curve Radius
Net Weightw/10 ft of Lift
in mm ft/min m/min ft3/min m3/min in mm ft m Air Inlet lb kg
7712-EL Plain 0.25 17 432 - - - - 2.66-12 68-305 3.5 1.1 - 88 40
Geared 0.25 17 432 - - - - 2.66-12 68-305 3.5 1.1 - 91 41
Motor 0.25 17 432 96 30 35 1 2.66-12 68-305 3.5 1.1 1/4 94 43
7714EL Plain 0.68 22 559 - - - - 3.25-12 82-305 3.5 1.1 - 95 43
Geared 0.68 22 559 - - - - 3.25-12 82-305 3.5 1.1 - 98 45
Motor 0.68 22 559 93 28 35 1 3.25-12 82-305 3.5 1.1 1/4 101 46
7796AL Plain 0.68 15 381 - - - - 3.00-12 76-305 3.5 1.1 - 104 47
Geared 0.68 15 381 - - - - 3.00-12 76-305 3.5 1.1 - 107 49
Motor 0.68 15 381 93 28 35 1 3.00-12 76-305 3.5 1.1 1/4 110 50
7798AL Plain 1.1 20 508 - - - - 3.00-12 76-305 3.5 1.1 - 123 56
Geared 1.1 20 508 - - - - 3.00-12 76-305 3.5 1.1 - 126 57
Motor 1.1 20 508 93 28 35 1 3.00-12 76-305 3.5 1.1 1/4 129 59
7799AL Plain 1.4 20 508 - - - - 3.00-12 76-305 3.5 1.1 - 123 56
Geared 1.4 20 508 - - - - 3.00-12 76-305 3.5 1.1 - 126 57
Motor 1.4 20 508 84 25 35 1 3.00-12 76-305 3.5 1.1 1/4 129 59
Working pressure from 5 to 7 bar (70 to 100 psi).
13
Air Winch Selection Guide330 to 22000 lb (150 to 10000 kg) capacity
ÚÚ It is the user’s responsibilityto determine the suitabilityof these winches for anyparticular use and to checkfor compliance withapplicable regulations.
Utility air winch quick selection guide(See specific series for complete technical information)
LIFTING: ANSI/ASME B30.16 allowable rated line pulls (5:1 design factor)First layer Mid Layer Top Layer Average
Utility models Capacity Speed Capacity Speed Capacity Speed flow requiredlbs kg fpm m/min lbs kg fpm m/min lbs kg fpm m/min cfm m3/min.
LS150R 455 207 103 31 380 173 115 35 330 150 138 42 78 2.2
LS300R 840 382 56 17 740 336 63 19 660 300 69 21 78 2.2
BU7A 1200 545 36 11 1000 454 43 13 1000 454 39 12 50 1.4
LS600R 1680 764 26 8 1480 673 30 9 1325 600 34 10 78 2.2
EU, EUL 2100 955 62 19 2000 909 68 21 2000 909 64 20 100 2.8
LS1500R (1) 4000 1818 19 6 3600 1636 21 6 3300 1500 23 7 125 3.5
FA2B 5000 2273 79 24 4000 1818 96 29 3200 1455 122 37 350 9.9
FA2.5A 5000 2273 119 36 5000 2273 114 35 4100 1864 141 43 700 19.8
HU40A 5000 2273 44 14 4000 1818 57 18 3200 1455 70 22 291 8.2
LS2000R 6200 2818 47 14 5150 2341 56 17 4400 2000 66 20 354 10.0
FA2 6600 3000 31 9 5200 2364 40 12 4400 2000 47 14 280 7.9
FA2.5 7000 3182 97 30 5800 2636 117 36 5000 2273 132 40 700 19.8
FA5A 11400 5182 40 12 10000 4545 50 15 8000 3636 62 19 700 19.8
FA5T 12500 5682 47 14 11300 5136 52 16 8400 3818 70 21 700 19.8
FA5 12500 5682 47 14 12500 5682 48 15 11000 5000 54 16 700 19.8
LS5000R 15600 7091 23 7 12900 5864 28 9 11000 5000 33 10 354 10.0
FA7T 18800 8545 32 10 16700 7591 37 11 12600 5727 48 15 750 21.2
FA7 18800 8545 32 10 18800 8545 33 10 15400 7000 40 12 750 21.2
FA10 27200 12364 28 9 27100 12319 19 6 22000 10000 23 7 800 22.7
PULLING: ANSI/ASME B30.7 allowable rated line pulls (3.5:1 design factor)First layer Mid Layer Top Layer Average
Utility models Capacity Speed Capacity Speed Capacity Speed flow requiredlbs kg fpm m/min lbs kg fpm m/min lbs kg fpm m/min cfm m3/min.
BU7A 1500 682 26 8 1200 545 34 10 1000 454 39 12 50 1.4
PS1000R 2200 1000 15 5 1950 886 17 5 1740 791 19 6 78 2.2
EU, EUL 3000 1364 45 14 2600 1182 49 15 2000 909 64 20 100 2.8
FA2B 5100 2318 76 23 4000 1818 96 29 3200 1455 122 37 350 9.9
PS2400R (1) 5280 2400 12 4 4800 2182 13 4 4370 1986 14 4 125 3.5
FA2 6800 3091 29 9 5400 2455 37 11 4500 2045 44 13 280 7.9
FA2.5A 7100 3227 67 20 6400 2909 42 13 5400 2455 45 14 700 19.8
FA2.5 8000 3636 79 24 6600 3000 42 13 5300 2409 119 36 700 19.8
HU40A 5100 2318 42 13 4000 1818 54 17 3200 1455 68 21 291 8.2
PS4000R 8800 4000 13 4 7300 3318 16 5 6200 2818 18 5 354 10.0
FA5A 13100 5955 26/8 8 10000 4545 50 15 8000 3636 62 19 700 19.8
FA5T 18000 8182 32 10 11600 5273 50 15 8600 3909 67 20 700 19.8
FA5 18000 8182 32 10 14100 6409 41 12 11600 5273 50 15 700 19.8
PS10000R 22000 10000 8 2 18300 8318 10 3 15600 7091 11 3 354 10.0
FA7T 27000 12273 23 7 18100 8227 32 10 13600 6182 46 14 750 21.2
FA7 27000 12273 23 7 18100 8227 32 10 13600 6182 46 14 750 21.2
FA10 34000 15455 17 5 27100 12319 19 6 22000 10000 23 7 800 22.7
(1) Standard cable is overwound; LS1500R and PS2400R are underwound.Note: Adding “-E” to model states compliance with European Machinery Directive. See previous page for explanation of compliance.
15
Classic Air Winch Series1000 and 2000 lb (454 and 909 kg) capacity
1
8
653
2
4
7Serving the construction and maintenanceindustries for more than fifty years, these time-tested IR air winches have become the industrystandard. Economically priced, these provenperformers offer exceptional quality and value.All IR Classic air winches meet ANSI / ASME B30.7n Standard features:1. Enclosed construction keeps out dirt and dust and seals in oil
and grease for complete lubrication of all moving parts
2. Ball and roller bearings = reduced friction
3. Reliable band type brake securely holds rated load
4. Disengaging clutch allows free wheeling of rope drum for handunwinding; standard on most models
5. Powerful radial piston air motor for positive starting with precisecontrol
6. Self-closing throttle shuts off automatically when released,providing well-graduated control for spotting loads
7. Reversible motor allows full control of load by throttle whenlifting, lowering and pulling
8. Throttle valve is designed to eliminate air leakage when thewinch is idle
Specifications: performance is based on 90 psi (6.3 bar) air inlet pressure with motor runningModel Line pull/half drum Line spd/half drum Drum length Avg. air consump. Max. stall 1st layer Pipe inlet Hose size Shipping wt
lbs kg fpm m/min in. hp scfm m3/min lbs kg in. (mm) in. (mm) lbs kg
BU7A (-E) 1000 454 43 13 4 .5 1.6 50 1.4 1950 886 1⁄ 2" (13 mm) 3⁄4" (19 mm) 90 41
BU7APTAB (-E) 1000 454 37 11 4 .5 1.6 50 1.4 1950 886 1⁄ 2" (13 mm) 3⁄4" (19 mm) 118 54
EU 2000 909 68 21 4 .81 4.4 100 2.8 4500 2045 3⁄4" (19 mm) 1" (25 mm) 360 164
EUABPT 2000 909 78 24 4 .81 4.4 100 2.8 4500 2045 3⁄4" (19 mm) 1" (25 mm) 375 170
EUL 2000 909 68 21 12.88 4.4 100 2.8 4500 2045 3⁄4" (19 mm) 1" (25 mm) 490 222
Adding “-E” to model states compliance with European Machinery Directive. See Air Winch Selection Guide for explanation of compliance.
EU 2000 lb(909 kg) capacity
n Options:• Automatic band brake • Construction cages
• Remote control • Remote pendent control
• Tensioning manifold • Marine 812 finish
• Sandblast and carbozincprimer
BU7A 1000 lb(454 kg) capacity24 25
HIRE
HIRE
LIFTING BAGS LIFTING BAGS
HIGH PRESSURE LIFTING BAGS (SQUARE SHAPE)
PART NUMBER 77973 77974 77975 76734 76735 76736 76737 76738 76739 76794 76740SIZE inch 6x6 9x9 12x12 15x15 18x18 22x22 24x24 27x27 31x31 35x35 36x36
THICKNESS inch 1.1” 1.1” 1.1” 1.1” 1.1” 1.1” 1.2” 1.2” 1.2” 1.2” 1.2”*MAX LIFT inch 2.7” 5.1” 5.9” 7.0” 8.6” 10.6” 11.8” 14.1” 16.5” 17.7” 20.0”
*MAX LOAD ton 1.1 3.1 6.4 10.8 14.2 22.7 27.7 35.3 46.4 58.8 74.1STRAP HANDLES qty. NONE NONE NONE NONE NONE 4 ea. 4 ea. 4 ea. 4 ea. 4 ea. 4 ea.
BAG WEIGHT lbs. 1.32 2.8 5.3 8.8 11.6 17.8 24.6 29.3 40.1 49.6 55.8WORKING PRESSURE PSI 116 116 116 116 116 116 116 116 116 116 116
TEST PRESSURE PSI 174 174 174 174 174 174 174 174 174 174 174BURST PRESSURE PSI 464 464 464 464 464 464 464 464 464 464 464
VOLUME Cu./ft. 0.18 0.53 1.48 3.04 5.37 10.45 14.7 21.9 32.5 46.8 53.1
26 27
STARTING SYSTEMSAPPLICATION ENGINE/MACHINE FLANGE TYPE PINION TEETH MODEL TYPE COLOUR I.D MANUFACTURER
SAE1 9 TEETH ATS630109M TURBINE ORANGESAE 1 9 TEETH ATS630109RS1000K TURBINE ORANGE
P.E.T (MWM) SAE 4 9 TEETH ATS630409M TURBINE SKY BLUE
SAE 1 10 TEETH ATS630110M TURBINE WHITESAE 1 10 TEETH ATS630110RS1000K TURBINE WHITE
SAE 3 11 TEETH ATS730311M TURBINE BLACKSAE 3 11 TEETH ATS7303116900K TURBINE BLACK
SPECIAL (HINO) 11 TEETH ATS634204M TURBINE GREYSPECIAL (HINO) 11 TEETH ATS634204RS1000K TURBINE GREY
ISUZU 6BGI SPECIAL (ISUZU) 11 TEETH ATS641104M TURBINE BROWN
SAE 1 OFFSET 12 TEETH ATS636512M TURBINE NAVY BLUESAE 1 OFFSET 12 TEETH ATS636512RS1000K TURBINE NAVY BLUE
PERKINS-NIPPER SAE 1 12 TEETH ATS630112M-R TURBINE RED
SAE 3 12 TEETH ATS730312M TURBINE SILVERSAE 3 12 TEETH ATS7303126900K TURBINE SILVER
SAE 1 SPECIAL 12 TEETH ATS732612M TURBINE GREENSAE 1 SPECIAL 12 TEETH ATS7326126900K TURBINE GREEN
KUBOTA SAE 1 12 TEETH ATS630118M TURBINE YELLOW
RS1000M 6900 SC6
UNLOADER VALVE PORT UNLOADER VALVE PORT
MWM
PERKINS-SMV (HI TORQ)
DETROIT / CAT C9
CAT 3304/3306
PERKINS-PJB/SMV
CAT 3126 / C7
SEB015970001189500
COMPRESSORSRELAY VALVES
HINO / JUG
STARTING SYSTEMS
28 29
SAFE AND RELIABLE FROM START TO FINISH.
SAFE AND RELIABLE FROM START TO FINISH.
In the hazardous world of harsh industrial environments air starters are essential for safe engine starting. And now there’s better options from a specialised manufacturer with over 20-years of air starting experience, who offer smarter and stronger starters to fit every engine and application. Austart not only offers a larger range, but due to our design and construction methods, Austart products are demonstrably better, safer and more durable.
That’s why Austart is the first choice in the Australian mining industry. And why the rest of the world is starting to recognise the advantages Austart has to offer.
AIR vs ELECTRIC.
Austart Air Starter Motors have many advantages compared to electric options. They not only eliminate the risk of igniting explosions in
dangerous environments, they are far more reliable with longer life between services. You can depend on higher cranking torque, faster engine starting and extended cranking periods when required. Unlike batteries, air starters are not affected by low temperatures, (even sub-zero) and always deliver 100% cranking power.
No in-line lubrication is needed with Austart Turbine Air Starters, so in dirty and poor air quality environments, dirt and airborne particles won’t clog components. They have very few moving parts, all are 100% friction free, they’re quieter, and self-governing cranking speed ensures they can’t over-speed. These features all add up to far greater reliability and operating life, and safer more productive workplaces.
WORLD’S SAFEST.
Of the many advantages air starters have over electric, safety against igniting explosions is paramount. For absolute safe starting in explosive environments the Austart ‘Pre-engaged’ starter is the proven performer.
The Australian Diesel Engine Systems – Explosion Protected Safety Standards AS/NZS 3584.2:2008 are the world’s most stringent and the Austart ‘Pre-engaged’ range exceeds them all.
SERVICE ON THE SPOT.
Another Austart advantage is ‘longer operating life between services’. And when maintenance is eventually required, the Austart range has been designed with an extra benefit in mind - ‘No Special Tools Needed’. For example, to service some motors in our range, all that’s required is one 7/16 spanner and a pair of circlip pliers to disassemble, service and reassemble the unit on location. A complete inventory of every Austart part is readily available at realistic pricing should the need arise.
ONLY AUSTART MEETS EVERY REQUIREMENT.
Austart not only have the largest range available, our design and manufacturing capability means we can supply special ‘made to order’
requirements in large or small quantities. And Austart gives you a choice of turbine or vane type motors with pre-engaged and inertia style drives, which ensures we can supply the best solution to every air start problem.
Originally, vane type motors lead the way in the development of air starting systems. Now Austart turbine technology has proved to have a number of advantages compared with older products.
Generally vane starters need lubricant added into the air supply which causes an oily discharge, fumes, mess and slippery hazards on the workplace floor. Also dust and particles stick to and clog components.
Austart turbine starters also have no wearing parts from friction, which means less maintenance and longer life. Installation is simpler than vane because there is no need to install lube lines and lubricators. Also, standard Austart turbine starters are quieter, having an integral muffler.
ROOF BOLTERS
30 31
HIRE
Specifications Part Number No. of stages Closed height Open height Weight (kg)ST 1000/500 3S 3 1000 mm 3000 mm 37.5ST 1200/700 3S 3 1200 mm 3800 mm 40.5ST 1345/900 2S 2 1345 mm 3450 mm 40.5ST 1345/900 3S 3 1345 mm 4400 mm 43ST 1500/1300 2S 2 1500 mm 3900 mm 43ST 1700/1500 2S 2 1700 mm 4600 mm 45.5Chuck size 19 mm hex.standard (other options available)
Minova Super Turbo Bolter
The flagship of the Minova range of machines is the Super Turbo Bolter, which has been designed for the drilling and installation of roofbolts and long tendons, and is supplied in five standard sizes.
Features of the Super Turbo Bolter
• High speed drilling and bolt insertion• Effective high performance thrust• High torque motor• Optional chuck speed• Lightweight• Reduced noise and vibration• Balanced for ease of handling• Two and three stage machines available• Suitable for roof bolting and cable bolting
ACCESSORIES
Heavy duty plastic storage case 600mm The 600mm heavy duty plastic storage case is an ideal solution for storing tools, or any piece of equipment that requires waterproof storage.
Heavy duty plastic storage case 900mm The 900mm heavy duty plastic storage case is an ideal solution for storing tools, or any piece of equipment that requires waterproof storage.
PE594378
PE525532
UNDERGROuND BORERS
32
UNDERGROUND BORERS
CALL NOW: (02) 49 32 66 11NEW101mm BorerAvailable
Underground Borers - Ideal forunderground installations.ie: Sewage, Telephone Lines, Gas& Electricity.
All models are available with 3 alternativehead designs to suit varied soil conditions. - Smooth Tapered Head - Stepped Tapered Head - Moving Head
Underground Borers (also known as Earth PiercingTools & Pneumatic Hammers) are equipped withquarter turn, air on reverse. Long & Short versions available.
PERSAS - Pneumatic Equipment Repair Sales & Service P/L117 Racecourse Rd Rutherford NSW 2320 / PO BOX 277 / ABN: 75 022 861 869
T / (02) 49 32 66 11 F / (02) 49 32 41 07www.persas.com.au
Oil Mister
Diameter (mm) lenth (mm) Weight (kg)Air Required
(cfm) L/SOperating Pressure
(Bar)
PVH45 45 990 8 18 8.5 8
PVH54 54 1295 17 22 10.5 8
PVH54S Short 54 1000 12 30 14 8
PVH65 65 1175 20 30 14 8
PVH76 76 1415 34 40 19 8
PVH76S Short 76 1230 26 40 19 8
PVH100 101 1740 73 70 33 8
Our Underground Borers are Manufactured in Australia & come with a 1 yr Warranty!
ACCESSORIES
These are easy to use, low cost, safety cables to help prevent injury if a hose connection separates. They can attach hose to hose or hose to equipment and are highly resistant to rust and corrosion and do not require any tools to install.
WHIPCHECK075 1” whipcheck
WHIPCHECK075
AIR PREPARATION
water sperator / lubricator. Features include a robust steel frame, minsup in and out, a clear lubricator and a maintenance free water seperator complete with autodrain.
This in line oiler is used for 3/4” Air Line and generally placed 6 to 10 feet from your air tool in order to keep it lubricated. It is clear so you will always know how much oil you have in it. This oiler is generally used for rock drills or pavement breakers but could used for any air tool using 3/4” air line.
A good lubricant improves the functioning of pneumatic equipment, reduces wear and the need for maintenance, increases productivity and improves the overall economy. Atlas Copco offers the lubricators to ensure effective lubrication of all compressed air machines.
PE594378
PE525532
CLG30
AIR PREPARATION
Protect your tools. This high flow mobile filter, regulator and lubricator unit with storage compartments. Perfect for use with any pneumatic torque multiplier.
FILTER/REGULATOR1” Filter/regulator combination unit in steel frame complete with minsup claw fittings and air in/out tags.
MFRC1
FILTER/REGULATOR / LUBRICATOR1” filter/regulator/lubricator combination unit in steel frame complete with minsup claw fittings and air in/out tags. Part No: MFRLC1
MFRLC1
BHPFRL
GOLD SERIESMETRIC CUTTERS
TITANIUM NITRIDE COATINGThe titanium nitride coating significantly increases the tool life by providing the following benefits:• Increased surface hardness to 85HRC• Ceramic surface, reducing friction by up to 30%• Especially resistant to cold welding• Suitable for cutting a wide range of materials
M2AL HIGH SPEED STEEL MATERIALM2AL high speed steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.
STEP HARDENED PROCESSThis state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.
MULTI-CUT GEOMETRYProvides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centering.
FULLY GROUND WITH INTERNAL RELIEFThis feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.
UNIVERSAL SHANK19.05mm (3/4") universal shank with 2 flat sections to suit most magnetic base drilling machines.
Part No. Diameter Depth Of Cut
Pilot PinDiameter
Shank Diameter
4.70mm Pilot Pin DiameterAT1225A 12mm 25mm 4.70mm 3/4" (19.05mm)AT1325A 13mm 25mm 4.70mm 3/4" (19.05mm)AT1425A 14mm 25mm 4.70mm 3/4" (19.05mm)6.35mm Pilot Pin DiameterAT1225 12mm 25mm 6.35mm 3/4" (19.05mm)AT1325 13mm 25mm 6.35mm 3/4" (19.05mm)AT1425 14mm 25mm 6.35mm 3/4" (19.05mm)AT1525 15mm 25mm 6.35mm 3/4" (19.05mm)AT1625 16mm 25mm 6.35mm 3/4" (19.05mm)AT1725 17mm 25mm 6.35mm 3/4" (19.05mm)AT1825 18mm 25mm 6.35mm 3/4" (19.05mm)AT1925 19mm 25mm 6.35mm 3/4" (19.05mm)AT2025 20mm 25mm 6.35mm 3/4" (19.05mm)AT2125 21mm 25mm 6.35mm 3/4" (19.05mm)AT2225 22mm 25mm 6.35mm 3/4" (19.05mm)AT2325 23mm 25mm 6.35mm 3/4" (19.05mm)AT2425 24mm 25mm 6.35mm 3/4" (19.05mm)AT2525 25mm 25mm 6.35mm 3/4" (19.05mm)AT2625 26mm 25mm 6.35mm 3/4" (19.05mm)AT2725 27mm 25mm 6.35mm 3/4" (19.05mm)AT2825 28mm 25mm 6.35mm 3/4" (19.05mm)AT2925 29mm 25mm 6.35mm 3/4" (19.05mm)AT3025 30mm 25mm 6.35mm 3/4" (19.05mm)AT3125 31mm 25mm 6.35mm 3/4" (19.05mm)AT3225 32mm 25mm 6.35mm 3/4" (19.05mm)AT3325 33mm 25mm 6.35mm 3/4" (19.05mm)AT3425 34mm 25mm 6.35mm 3/4" (19.05mm)AT3525 35mm 25mm 6.35mm 3/4" (19.05mm)AT3625 36mm 25mm 6.35mm 3/4" (19.05mm)AT3725 37mm 25mm 6.35mm 3/4" (19.05mm)AT3825 38mm 25mm 6.35mm 3/4" (19.05mm)AT3925 39mm 25mm 6.35mm 3/4" (19.05mm)AT4025 40mm 25mm 6.35mm 3/4" (19.05mm)AT4125 41mm 25mm 6.35mm 3/4" (19.05mm)AT4225 42mm 25mm 6.35mm 3/4" (19.05mm)AT4325 43mm 25mm 6.35mm 3/4" (19.05mm)AT4425 44mm 25mm 6.35mm 3/4" (19.05mm)AT4525 45mm 25mm 6.35mm 3/4" (19.05mm)AT4625 46mm 25mm 6.35mm 3/4" (19.05mm)AT4725 47mm 25mm 6.35mm 3/4" (19.05mm)AT4825 48mm 25mm 6.35mm 3/4" (19.05mm)AT4925 49mm 25mm 6.35mm 3/4" (19.05mm)AT5025 50mm 25mm 6.35mm 3/4" (19.05mm)AT5125 51mm 25mm 6.35mm 3/4" (19.05mm)AT5225 52mm 25mm 6.35mm 3/4" (19.05mm)
METRIC GOLD 25MM DEPTH OF CUT
←12
- 52
mm→
←25mm Cutting Depth→
6.35mm Pilot Pin to suit - Part# SP160034.70mm Pilot Pin to suit - Part# SP16001
• PH 07 3287 1114 • FX 07 3287 1115 • WEB www.industrialtool.com.au28
Magnetic Base
DrillingMachines
Clamps
Engineer'sTools
SharpeningMachines
MetalCuttingSaws
DrillingMachines
Punches& Shears
GrindingMachines
Fans &Ventilators
WorkshopStorage
M7Airtools
NPKAirtools
PneumaticProducts
BevellingMachines& WeldingCarriages
CuttingTools
Part No. Diameter DepthOf Cut
Pilot PinDiameter
Shank Diameter
8mm Pilot Pin Diameter
AT1875 18mm 75mm 8mm 3/4" (19.05mm)
AT1975 19mm 75mm 8mm 3/4" (19.05mm)
AT2075 20mm 75mm 8mm 3/4" (19.05mm)
AT2175 21mm 75mm 8mm 3/4" (19.05mm)
AT2275 22mm 75mm 8mm 3/4" (19.05mm)
AT2375 23mm 75mm 8mm 3/4" (19.05mm)
AT2475 24mm 75mm 8mm 3/4" (19.05mm)
AT2575 25mm 75mm 8mm 3/4" (19.05mm)
AT2675 26mm 75mm 8mm 3/4" (19.05mm)
AT2775 27mm 75mm 8mm 3/4" (19.05mm)
AT2875 28mm 75mm 8mm 3/4" (19.05mm)
AT2975 29mm 75mm 8mm 3/4" (19.05mm)
AT3075 30mm 75mm 8mm 3/4" (19.05mm)
AT3175 31mm 75mm 8mm 3/4" (19.05mm)
AT3275 32mm 75mm 8mm 3/4" (19.05mm)
METRIC GOLD 75MM DEPTH OF CUT
←18
- 32
mm→
←75mm Cutting Depth→
←18
32
mm→
Part No. Diameter Depth Of Cut
Pilot PinDiameter
Shank Diameter
4.70mm Pilot Pin DiameterAT1250A 12mm 50mm 4.70mm 3/4" (19.05mm)AT1350A 13mm 50mm 4.70mm 3/4" (19.05mm)AT1450A 14mm 50mm 4.70mm 3/4" (19.05mm)6.35mm Pilot Pin DiameterAT1250 12mm 50mm 6.35mm 3/4" (19.05mm)AT1350 13mm 50mm 6.35mm 3/4" (19.05mm)AT1450 14mm 50mm 6.35mm 3/4" (19.05mm)AT1550 15mm 50mm 6.35mm 3/4" (19.05mm)AT1650 16mm 50mm 6.35mm 3/4" (19.05mm)AT16550 16.5mm 50mm 6.35mm 3/4" (19.05mm)AT1750 17mm 50mm 6.35mm 3/4" (19.05mm)AT1850 18mm 50mm 6.35mm 3/4" (19.05mm)AT1950 19mm 50mm 6.35mm 3/4" (19.05mm)AT2050 20mm 50mm 6.35mm 3/4" (19.05mm)AT2150 21mm 50mm 6.35mm 3/4" (19.05mm)AT2250 22mm 50mm 6.35mm 3/4" (19.05mm)AT2350 23mm 50mm 6.35mm 3/4" (19.05mm)AT2450 24mm 50mm 6.35mm 3/4" (19.05mm)AT2550 25mm 50mm 6.35mm 3/4" (19.05mm)AT2650 26mm 50mm 6.35mm 3/4" (19.05mm)AT2750 27mm 50mm 6.35mm 3/4" (19.05mm)AT2850 28mm 50mm 6.35mm 3/4" (19.05mm)AT2950 29mm 50mm 6.35mm 3/4" (19.05mm)AT3050 30mm 50mm 6.35mm 3/4" (19.05mm)AT3150 31mm 50mm 6.35mm 3/4" (19.05mm)AT3250 32mm 50mm 6.35mm 3/4" (19.05mm)AT3350 33mm 50mm 6.35mm 3/4" (19.05mm)AT3450 34mm 50mm 6.35mm 3/4" (19.05mm)AT3550 35mm 50mm 6.35mm 3/4" (19.05mm)AT3650 36mm 50mm 6.35mm 3/4" (19.05mm)AT3750 37mm 50mm 6.35mm 3/4" (19.05mm)AT3850 38mm 50mm 6.35mm 3/4" (19.05mm)AT3950 39mm 50mm 6.35mm 3/4" (19.05mm)AT4050 40mm 50mm 6.35mm 3/4" (19.05mm)AT4150 41mm 50mm 6.35mm 3/4" (19.05mm)AT4250 42mm 50mm 6.35mm 3/4" (19.05mm)AT4350 43mm 50mm 6.35mm 3/4" (19.05mm)AT4450 44mm 50mm 6.35mm 3/4" (19.05mm)AT4550 45mm 50mm 6.35mm 3/4" (19.05mm)AT4650 46mm 50mm 6.35mm 3/4" (19.05mm)AT4750 47mm 50mm 6.35mm 3/4" (19.05mm)AT4850 48mm 50mm 6.35mm 3/4" (19.05mm)AT4950 49mm 50mm 6.35mm 3/4" (19.05mm)AT5050 50mm 50mm 6.35mm 3/4" (19.05mm)AT5150 51mm 50mm 6.35mm 3/4" (19.05mm)AT5250 52mm 50mm 6.35mm 3/4" (19.05mm)AT5550 55mm 50mm 6.35mm 3/4" (19.05mm)AT5950 59mm 50mm 6.35mm 3/4" (19.05mm)AT6050 60mm 50mm 6.35mm 3/4" (19.05mm)
METRIC GOLD 50MM DEPTH OF CUT
←12
- 60
mm→
←50mm Cutting Depth→
6.35mm Pilot Pin to suit - Part# SP160044.70mm Pilot Pin to suit - Part# SP16002
8mm Pilot Pin to suit - Part# SP18075
• FX 07 3287 1115• PH 07 3287 1114• WEB www.industrialtool.com.au 29
Magnetic Base
DrillingMachines
Clamps
Engineer'sTools
SharpeningMachines
MetalCuttingSaws
DrillingMachines
Punches& Shears
GrindingMachines
Fans &Ventilators
WorkshopStorage
M7Airtools
NPKAirtools
PneumaticProducts
BevellingMachines& WeldingCarriages
CuttingTools
MAXI-CUTMETRIC CUTTERS
Tungsten Carbide Tipped Annular CuttersAs well as providing excellent life in mild steel, Tungsten Carbide Tipped Cutters are suitable for drilling difficult materials eg. stainless steel, Bisalloy and wear plate.
These Tungsten Carbide Tipped Cutters consist of an alloy metal body, and tungsten carbide cutting teeth. Due to this composition, these cutters are less susceptible to breakage than standard high speed steel cutters, especially in larger diameters and longer lengths. The tungsten carbide cutting teeth can also be sharpened and replaced.
Large range available in sizes 14-150mm diameters, and lengths up to 100mm.
METRIC MAXI-RAIL 25MM DEPTH OF CUTTungsten carbide tipped specifically designed for drilling railway line & suitable for drilling other hard materials such as wear plate & Bisalloy.
ASP-RAIL 25MM DEPTH OF CUTASP® 2030 HSS POWDER STEELASP® 2030 powder steel offers incredible wear resistance & ductility, and will outperform any other cutter on the market. ASP® steels are produced by powder metallurgy through a 3-step process: gas-atomisation, hot isostatic pressing and post processing operations such as forging, rolling or drawing.
Suitable for drilling railway line, stainless steel & hardened steels, where high wear resistance and lifetime are required.• Incredible wear resistance• Uniform micro structure• Less susceptible to breakage
←18
- 35
mm→
←25mm Cutting Depth→
Part No. Diameter Depth Of Cut
Pilot PinDiameter
Shank Diameter
HMRAIL1825 18mm 25mm 8mm 3/4" (19.05mm)
HMRAIL2025 20mm 25mm 8mm 3/4" (19.05mm)
HMRAIL2225 22mm 25mm 8mm 3/4" (19.05mm)
HMRAIL2425 24mm 25mm 8mm 3/4" (19.05mm)
HMRAIL2525 25mm 25mm 8mm 3/4" (19.05mm)
HMRAIL2625 26mm 25mm 8mm 3/4" (19.05mm)
HMRAIL2825 28mm 25mm 8mm 3/4" (19.05mm)
HMRAIL3025 30mm 25mm 8mm 3/4" (19.05mm)
HMRAIL3225 32mm 25mm 8mm 3/4" (19.05mm)
HMRAIL3525 35mm 25mm 8mm 3/4" (19.05mm)
Part No. Diameter Depth Of Cut
Pilot PinDiameter
Shank Diameter
HMRAIL3225-ASP 32mm 25mm 6.35mm 3/4" (19.05mm)
8mm Pilot Pin to suit - Part# SP18025
6.35mm Pilot Pin to suit - Part# SP16003
METRIC MAXI-CUT 50MM DEPTH OF CUT
←14
- 15
0mm→
←50mm Cutting Depth→
Part No. Diameter Depth Of Cut
Pilot PinDiameter
Shank Diameter
3/4" SHANK TYPEMAX50-14 14mm 50mm 6.35mm 3/4" (19.05mm)
MAX50-15 15mm 50mm 6.35mm 3/4" (19.05mm)
MAX50-16 16mm 50mm 6.35mm 3/4" (19.05mm)
MAX50-17 17mm 50mm 6.35mm 3/4" (19.05mm)
MAX50-18 18mm 50mm 8mm 3/4" (19.05mm)
MAX50-19 19mm 50mm 8mm 3/4" (19.05mm)
MAX50-20 20mm 50mm 8mm 3/4" (19.05mm)
MAX50-21 21mm 50mm 8mm 3/4" (19.05mm)
MAX50-22 22mm 50mm 8mm 3/4" (19.05mm)
MAX50-23 23mm 50mm 8mm 3/4" (19.05mm)
MAX50-24 24mm 50mm 8mm 3/4" (19.05mm)
MAX50-25 25mm 50mm 8mm 3/4" (19.05mm)
MAX50-26 26mm 50mm 8mm 3/4" (19.05mm)
MAX50-27 27mm 50mm 8mm 3/4" (19.05mm)
MAX50-28 28mm 50mm 8mm 3/4" (19.05mm)
MAX50-29 29mm 50mm 8mm 3/4" (19.05mm)
MAX50-30 30mm 50mm 8mm 3/4" (19.05mm)
MAX50-31 31mm 50mm 8mm 3/4" (19.05mm)
MAX50-32 32mm 50mm 8mm 3/4" (19.05mm)
MAX50-33 33mm 50mm 8mm 3/4" (19.05mm)
MAX50-34 34mm 50mm 8mm 3/4" (19.05mm)
MAX50-35 35mm 50mm 8mm 3/4" (19.05mm)
MAX50-36 36mm 50mm 8mm 3/4" (19.05mm)
MAX50-37 37mm 50mm 8mm 3/4" (19.05mm)
MAX50-38 38mm 50mm 8mm 3/4" (19.05mm)
MAX50-39 39mm 50mm 8mm 3/4" (19.05mm)
MAX50-40 40mm 50mm 8mm 3/4" (19.05mm)
MAX50-41 41mm 50mm 8mm 3/4" (19.05mm)
MAX50-42 42mm 50mm 8mm 3/4" (19.05mm)
MAX50-43 43mm 50mm 8mm 3/4" (19.05mm)
MAX50-44 44mm 50mm 8mm 3/4" (19.05mm)
MAX50-45 45mm 50mm 8mm 3/4" (19.05mm)
MAX50-46 46mm 50mm 8mm 3/4" (19.05mm)
MAX50-47 47mm 50mm 8mm 3/4" (19.05mm)
MAX50-48 48mm 50mm 8mm 3/4" (19.05mm)
MAX50-49 49mm 50mm 8mm 3/4" (19.05mm)
MAX50-50 50mm 50mm 8mm 3/4" (19.05mm)
MAX50-51 51mm 50mm 8mm 3/4" (19.05mm)
MAX50-52 52mm 50mm 8mm 3/4" (19.05mm)
MAX50-53 53mm 50mm 8mm 3/4" (19.05mm)
MAX50-54 54mm 50mm 8mm 3/4" (19.05mm)
6.35mm Pilot Pin to suit - Part# SP16004
8mm Pilot Pin to suit - Part# SP18050
• PH 07 3287 1114 • FX 07 3287 1115 • WEB www.industrialtool.com.au38
Magnetic Base
DrillingMachines
Clamps
Engineer'sTools
SharpeningMachines
MetalCuttingSaws
DrillingMachines
Punches& Shears
GrindingMachines
Fans &Ventilators
WorkshopStorage
M7Airtools
NPKAirtools
PneumaticProducts
BevellingMachines& WeldingCarriages
CuttingTools
METRIC MAXI-CUT 50MM DEPTH OF CUT
←14
- 15
0mm→
←50mm Cutting Depth→
Part No. Diameter Depth Of Cut
Pilot PinDiameter
Shank Diameter
3/4" SHANK TYPEMAX50-55 55mm 50mm 8mm 3/4" (19.05mm)
MAX50-56 56mm 50mm 8mm 3/4" (19.05mm)
MAX50-57 57mm 50mm 8mm 3/4" (19.05mm)
MAX50-58 58mm 50mm 8mm 3/4" (19.05mm)
MAX50-59 59mm 50mm 8mm 3/4" (19.05mm)
MAX50-60A 60mm 50mm 8mm 3/4" (19.05mm)
MAX50-61A 61mm 50mm 8mm 3/4" (19.05mm)
MAX50-62A 62mm 50mm 8mm 3/4" (19.05mm)
MAX50-63A 63mm 50mm 8mm 3/4" (19.05mm)
MAX50-64A 64mm 50mm 8mm 3/4" (19.05mm)
MAX50-65A 65mm 50mm 8mm 3/4" (19.05mm)
MAX50-66A 66mm 50mm 8mm 3/4" (19.05mm)
MAX50-67A 67mm 50mm 8mm 3/4" (19.05mm)
MAX50-68A 68mm 50mm 8mm 3/4" (19.05mm)
MAX50-69A 69mm 50mm 8mm 3/4" (19.05mm)
MAX50-70A 70mm 50mm 8mm 3/4" (19.05mm)
MAX50-71A 71mm 50mm 8mm 3/4" (19.05mm)
MAX50-72A 72mm 50mm 8mm 3/4" (19.05mm)
MAX50-73A 73mm 50mm 8mm 3/4" (19.05mm)
MAX50-74A 74mm 50mm 8mm 3/4" (19.05mm)
MAX50-75A 75mm 50mm 8mm 3/4" (19.05mm)
8mm Pilot Pin to suit - Part# SP18050
METRIC MAXI-CUT 50MM DEPTH OF CUT
←14
- 15
0mm→
←50mm Cutting Depth→
Part No. Diameter Depth Of Cut
Pilot PinDiameter
Shank Diameter
1-1/4" SHANK TYPEMAX50-60B 60mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-61B 61mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-62B 62mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-63B 63mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-64B 64mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-65B 65mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-66B 66mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-67B 67mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-68B 68mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-69B 69mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-70B 70mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-71B 71mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-72B 72mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-73B 73mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-74B 74mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-75B 75mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-76B 76mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-77B 77mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-78B 78mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-79B 79mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-80B 80mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-81B 81mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-82B 82mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-83B 83mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-84B 84mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-85B 85mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-86B 86mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-87B 87mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-88B 88mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-89B 89mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-90B 90mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-92B 92mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-95B 95mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-98B 98mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-100B 100mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-102B 102mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-105B 105mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-110B 110mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-115B 115mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-120B 120mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-125B 125mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-130B 130mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-135B 135mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-140B 140mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-145B 145mm 50mm 8mm 1-1/4" (31.75mm)
MAX50-150B 150mm 50mm 8mm 1-1/4" (31.75mm)8mm Pilot Pin to suit - Part# SP18050
• FX 07 3287 1115• PH 07 3287 1114• WEB www.industrialtool.com.au 39
Magnetic Base
DrillingMachines
Clamps
Engineer'sTools
SharpeningMachines
MetalCuttingSaws
DrillingMachines
Punches& Shears
GrindingMachines
Fans &Ventilators
WorkshopStorage
M7Airtools
NPKAirtools
PneumaticProducts
BevellingMachines& WeldingCarriages
CuttingTools
MAXI-CUTMETRIC CUTTERS
Tungsten Carbide Tipped Annular CuttersAs well as providing excellent life in mild steel, Tungsten Carbide Tipped Annular Cutters are suitable for drilling difficult materials eg. stainless steel, Bisalloy and wear plate.
These Tungsten Carbide Tipped Cutters consist of an alloy metal body, and tungsten carbide cutting teeth. Due to this composition, these cutters are less susceptible to breakage than standard high speed steel cutters, especially in larger diameters and lengths. The tungsten carbide cutting teeth can also be sharpened and replaced.
Large range available in sizes 14 - 150mm diameters, and lengths up to 100mm.
Part No. Diameter Depth Of Cut
Pilot PinDiameter
Shank Diameter
3/4" SHANK TYPEMAX75-18 18mm 75mm 8mm 3/4" (19.05mm)
MAX75-19 19mm 75mm 8mm 3/4" (19.05mm)
MAX75-20 20mm 75mm 8mm 3/4" (19.05mm)
MAX75-22 22mm 75mm 8mm 3/4" (19.05mm)
MAX75-24 24mm 75mm 8mm 3/4" (19.05mm)
MAX75-25 25mm 75mm 8mm 3/4" (19.05mm)
MAX75-26 26mm 75mm 8mm 3/4" (19.05mm)
MAX75-30 30mm 75mm 8mm 3/4" (19.05mm)
MAX75-32 32mm 75mm 8mm 3/4" (19.05mm)
MAX75-33 33mm 75mm 8mm 3/4" (19.05mm)
MAX75-35 35mm 75mm 8mm 3/4" (19.05mm)
MAX75-36 36mm 75mm 8mm 3/4" (19.05mm)
MAX75-38 38mm 75mm 8mm 3/4" (19.05mm)
MAX75-40 40mm 75mm 8mm 3/4" (19.05mm)
MAX75-42 42mm 75mm 8mm 3/4" (19.05mm)
MAX75-45 45mm 75mm 8mm 3/4" (19.05mm)
MAX75-50 50mm 75mm 8mm 3/4" (19.05mm)
MAX75-50.5 50.5mm 75mm 8mm 3/4" (19.05mm)
MAX75-52 52mm 75mm 8mm 3/4" (19.05mm)
MAX75-55 55mm 75mm 8mm 3/4" (19.05mm)
1-1/4" SHANK TYPEMAX75-60B 60mm 75mm 8mm 1-1/4" (31.75mm)
MAX75-60.5B 60.5mm 75mm 8mm 1-1/4" (31.75mm)
MAX75-65B 65mm 75mm 8mm 1-1/4" (31.75mm)
MAX75-67B 67mm 75mm 8mm 1-1/4" (31.75mm)
MAX75-68B 68mm 75mm 8mm 1-1/4" (31.75mm)
MAX75-70B 70mm 75mm 8mm 1-1/4" (31.75mm)
MAX75-73B 73mm 75mm 8mm 1-1/4" (31.75mm)
MAX75-75B 75mm 75mm 8mm 1-1/4" (31.75mm)
MAX75-80B 80mm 75mm 8mm 1-1/4" (31.75mm)
MAX75-85B 85mm 75mm 8mm 1-1/4" (31.75mm)
MAX75-90B 90mm 75mm 8mm 1-1/4" (31.75mm)MAX75-95B 95mm 75mm 8mm 1-1/4" (31.75mm)MAX75-100B 100mm 75mm 8mm 1-1/4" (31.75mm)
METRIC MAXI-CUT 75MM DEPTH OF CUT
←18
- 10
0mm→
←75mm Cutting Depth→
8mm Pilot Pin to suit - Part # SP18075
• PH 07 3287 1114 • FX 07 3287 1115 • WEB www.industrialtool.com.au40
Magnetic Base
DrillingMachines
Clamps
Engineer'sTools
SharpeningMachines
MetalCuttingSaws
DrillingMachines
Punches& Shears
GrindingMachines
Fans &Ventilators
WorkshopStorage
M7Airtools
NPKAirtools
PneumaticProducts
BevellingMachines& WeldingCarriages
CuttingTools
METRIC MAXI-CUT 100MM DEPTH OF CUT
Part No. Diameter Depth Of Cut
Pilot PinDiameter
Shank Diameter
3/4" SHANK TYPEMAX100-18 18mm 100mm 8mm 3/4" (19.05mm)
MAX100-19 19mm 100mm 8mm 3/4" (19.05mm)
MAX100-20 20mm 100mm 8mm 3/4" (19.05mm)
MAX100-21 21mm 100mm 8mm 3/4" (19.05mm)
MAX100-22 22mm 100mm 8mm 3/4" (19.05mm)
MAX100-23 23mm 100mm 8mm 3/4" (19.05mm)
MAX100-24 24mm 100mm 8mm 3/4" (19.05mm)
MAX100-25 25mm 100mm 8mm 3/4" (19.05mm)
MAX100-26 26mm 100mm 8mm 3/4" (19.05mm)
MAX100-27 27mm 100mm 8mm 3/4" (19.05mm)
MAX100-28 28mm 100mm 8mm 3/4" (19.05mm)
MAX100-29 29mm 100mm 8mm 3/4" (19.05mm)
MAX100-30 30mm 100mm 8mm 3/4" (19.05mm)
MAX100-31 31mm 100mm 8mm 3/4" (19.05mm)
MAX100-32 32mm 100mm 8mm 3/4" (19.05mm)
MAX100-33 33mm 100mm 8mm 3/4" (19.05mm)
MAX100-34 34mm 100mm 8mm 3/4" (19.05mm)
MAX100-35 35mm 100mm 8mm 3/4" (19.05mm)
MAX100-36 36mm 100mm 8mm 3/4" (19.05mm)
MAX100-37 37mm 100mm 8mm 3/4" (19.05mm)
MAX100-38 38mm 100mm 8mm 3/4" (19.05mm)
MAX100-39 39mm 100mm 8mm 3/4" (19.05mm)
MAX100-40 40mm 100mm 8mm 3/4" (19.05mm)
MAX100-41 41mm 100mm 8mm 3/4" (19.05mm)
MAX100-42 42mm 100mm 8mm 3/4" (19.05mm)
MAX100-43 43mm 100mm 8mm 3/4" (19.05mm)
MAX100-44 44mm 100mm 8mm 3/4" (19.05mm)
MAX100-45 45mm 100mm 8mm 3/4" (19.05mm)
MAX100-46 46mm 100mm 8mm 3/4" (19.05mm)
MAX100-47 47mm 100mm 8mm 3/4" (19.05mm)
MAX100-48 48mm 100mm 8mm 3/4" (19.05mm)
MAX100-49 49mm 100mm 8mm 3/4" (19.05mm)
MAX100-50 50mm 100mm 8mm 3/4" (19.05mm)
MAX100-51 51mm 100mm 8mm 3/4" (19.05mm)
MAX100-52 52mm 100mm 8mm 3/4" (19.05mm)
MAX100-53 53mm 100mm 8mm 3/4" (19.05mm)
MAX100-54 54mm 100mm 8mm 3/4" (19.05mm)
MAX100-55 55mm 100mm 8mm 3/4" (19.05mm)
MAX100-56 56mm 100mm 8mm 3/4" (19.05mm)
MAX100-57 57mm 100mm 8mm 3/4" (19.05mm)
MAX100-58 58mm 100mm 8mm 3/4" (19.05mm)
MAX100-59 59mm 100mm 8mm 3/4" (19.05mm)
MAX100-60 60mm 100mm 8mm 3/4" (19.05mm)
←18
- 12
0mm→
←100mm Cutting Depth→
8mm Pilot Pin to suit - Part # SP18100
←18
- 12
0mm→
METRIC MAXI-CUT 100MM DEPTH OF CUT
Part No. Diameter DepthOf Cut
Pilot PinDiameter
Shank Diameter
1-1/4" SHANK TYPEMAX100-61B 61mm 100mm 8mm 1-1/4" (31.75mm)
MAX100-62B 62mm 100mm 8mm 1-1/4" (31.75mm)
MAX100-63B 63mm 100mm 8mm 1-1/4" (31.75mm)
MAX100-64B 64mm 100mm 8mm 1-1/4" (31.75mm)
MAX100-65B 65mm 100mm 8mm 1-1/4" (31.75mm)
MAX100-66B 66mm 100mm 8mm 1-1/4" (31.75mm)
MAX100-67B 67mm 100mm 8mm 1-1/4" (31.75mm)
MAX100-68B 68mm 100mm 8mm 1-1/4" (31.75mm)
MAX100-69B 69mm 100mm 8mm 1-1/4" (31.75mm)
MAX100-70B 70mm 100mm 8mm 1-1/4" (31.75mm)
MAX100-71B 71mm 100mm 8mm 1-1/4" (31.75mm)
MAX100-72B 72mm 100mm 8mm 1-1/4" (31.75mm)
MAX100-73B 73mm 100mm 8mm 1-1/4" (31.75mm)
MAX100-74B 74mm 100mm 8mm 1-1/4" (31.75mm)
MAX100-75B 75mm 100mm 8mm 1-1/4" (31.75mm)
MAX100-76B 76mm 100mm 8mm 1-1/4" (31.75mm)
MAX100-77B 77mm 100mm 8mm 1-1/4" (31.75mm)
MAX100-78B 78mm 100mm 8mm 1-1/4" (31.75mm)
MAX100-79B 79mm 100mm 8mm 1-1/4" (31.75mm)
MAX100-80B 80mm 100mm 8mm 1-1/4" (31.75mm)
MAX100-81B 81mm 100mm 8mm 1-1/4" (31.75mm)
MAX100-82B 82mm 100mm 8mm 1-1/4" (31.75mm)
MAX100-83B 83mm 100mm 8mm 1-1/4" (31.75mm)
MAX100-84B 84mm 100mm 8mm 1-1/4" (31.75mm)
MAX100-85B 85mm 100mm 8mm 1-1/4" (31.75mm)
MAX100-86B 86mm 100mm 8mm 1-1/4" (31.75mm)
MAX100-87B 87mm 100mm 8mm 1-1/4" (31.75mm)
MAX100-88B 88mm 100mm 8mm 1-1/4" (31.75mm)
MAX100-89B 89mm 100mm 8mm 1-1/4" (31.75mm)
MAX100-90B 90mm 100mm 8mm 1-1/4" (31.75mm)
MAX100-92B 92mm 100mm 8mm 1-1/4" (31.75mm)
MAX100-95B 95mm 100mm 8mm 1-1/4" (31.75mm)
MAX100-100B 100mm 100mm 8mm 1-1/4" (31.75mm)
MAX100-102B 102mm 100mm 8mm 1-1/4" (31.75mm)
MAX100-105B 105mm 100mm 8mm 1-1/4" (31.75mm)
MAX100-110B 110mm 100mm 8mm 1-1/4" (31.75mm)
MAX100-115B 115mm 100mm 8mm 1-1/4" (31.75mm)
MAX100-120B 120mm 100mm 8mm 1-1/4" (31.75mm)
←100mm Cutting Depth→
8mm Pilot Pin to suit - Part # SP18100
• FX 07 3287 1115• PH 07 3287 1114• WEB www.industrialtool.com.au 41
Magnetic Base
DrillingMachines
Clamps
Engineer'sTools
SharpeningMachines
MetalCuttingSaws
DrillingMachines
Punches& Shears
GrindingMachines
Fans &Ventilators
WorkshopStorage
M7Airtools
NPKAirtools
PneumaticProducts
BevellingMachines& WeldingCarriages
CuttingTools
39
HVL - SINGLE ACTING VERY LOW HEIGHT PANCAKE CYLINDERS
3
Model Dimensions in mmnumber
HPS50HPS51
HPS100HPS200HPS300HPS500
HPS750
HPS1000
HPS1500
Model Dimensions in mmCapacityTonnes
10
20
32
50
104
Strokemm
6
6
6
6
6
Oil cap.cm³
9
17
27
43
88
Weightkg
1.6
2.6
3.0
7.2
15.6
B
87
104
120
158
200
A
28
32
34
45
65
C
38
52
60
75
100
number
HVL10
HVL20
HVL30
HVL50
HVL100
CapacityTonnes
4.54.5
10203250
73
109
147
Strokemm
616
10111215
16
16
16
Oil cap.cm³
410
143155
107
164
245
330
Weightkg
0.80.9
1.62.64.26.6
10.4
23.2
28.5
A
3242
46525967
81
91
100
B
6060
81100115140
165
215
215
Model Dimensions in mmCnumber
HLS101
HLS201
HLS301HLS302
HLS501HLS502
HLS1001
HLS1002
HLS1501
HLS1502
CapacityTonnes
10
20
32
32
50
50
109
109
147
147
Strokemm
40
44
25
60
25
60
25
60
25
50
Oil cap.cm³
58
126
114
274
178
428
384
921
516
1031
Weightkg
2.4
4.8
5.0
7.0
8.4
10.4
19.8
24.0
37.0
42.0
A
95
102
83
119
91
126
108
143
130
155
B
70
90
102
102
127
127
178
178
216
216
38
51
60
60
70
70
114
114
114
114
C
2424
38516070
82
114
114
Single acting load return
Piston rod QPQ processed to reduce wear and corrosion
Low friction bearing surfaces
Anti-extrusion seals
A
C
B
B
A
CHPS - SINGLE ACTING LOW HEIGHT PAD CYLINDERS
Single acting, spring assisted return
Low friction bearing surfaces
Anti-extrusion seals
Piston rod QPQ processed to reduce wear and corrosion
HLS - SINGLE ACTING LOW HEIGHT CYLINDERS
Single acting, spring assisted return
Low friction bearing surfaces
Anti-extrusion seals
Piston rod QPQ processed to reduce wear and corrosion A
C
B
40 41
4
Single acting, spring assisted return
Piston rod QPQ processed to reduce wear and corrosion
Low friction bearing surfaces
HSS - SINGLE ACTING MULTI-PURPOSE CYLINDERS
Collar thread protector supplied as standard
Model Dimensions in mmnumber
HSS51HSS52
HSS53
HSS54
HSS55HSS57
HSS101
HSS102HSS104
HSS59
HSS106
HSS1010
HSS108
HSS1012
HSS152HSS154
HSS156HSS1510HSS252
HSS256
HSS2510
HSS254
HSS2518HSS308
HSS504
HSS506HSS508
HSS5013HSS756HSS1004
HSS1006
HSS10010
HSS2514
HSS502
Lightweight alternatives available please see page 5
CapacityTonnes
4.54.5
4.5
4.5
4.5
10
10
10
10
10
10
10
4.5
4.5
25
25
14.514.5
14.514.5
25
25
25
29
50
5050
50
73
109
109
109
25
50
Strokemm
2550
75
100
125
25
56
100
150
206
250
305
176
227
150
250
50100
150250
51
102
457
205
102
152203
330
152
102
153
254
356
51
Oil cap.cm³
1632
48
64
80
36
81
144
217
297
361
440
113
146
524
874
101203
304507
178
356
1597
860
728
10841448
2354
1561
1565
2347
3896
1242
364
Weightkg
1.01.2
1.4
1.5
1.8
1.8
2.4
3.0
4.2
5.0
5.4
6.2
2.0
2.4
9.6
12.6
3.45.0
6.68.8
6.5
8.0
21.4
18.6
16.8
20.023.2
33.6
31.0
41.6
49.8
65.5
16.8
13.0
A
107132
157
182
207
100
131
175
225
281
325
379
258
308
273
374
154204
254354
174
225
611
374
201
251302
429
272
223
274
375
480
150
B
3838
38
38
38
57
57
57
57
57
57
57
38
38
86
86
7070
7070
86
86
86
102
127
127127
127
146
185
185
185
86
127
C
2424
24
24
24
35
35
35
35
35
35
35
24
24
54
54
4141
4141
54
54
54
57
79
7979
79
95
114
114
114
54
79
B
A
C
5
Dimensions in mmModelnumberHAS306
HAS1006
Strokemm152152
152
Oil cap.cm³672
1077
2340
Weightkg6.09.0
23.0
B104135
195
C6080
110
CapacityTonnes
3251
110
A282287
317
HAS506
HAS - SINGLE ACTING LIGHTWEIGHT ALUMINIUM CYLINDERS
Hard anodised and wear resistant piston rod
Used in a wide variety of industrial applications
Lightweight and easy to position
Capacities from 32 to 110 tonnes
C
A
B
HPC - SINGLE ACTING PULL CYLINDERS
Single acting, spring assisted return
Replaceable pulling and clevis eyes
Low friction bearing surfaces with piston wiper
Anti-extrusion seals
Model Dimensions in mmCapacityTonnesnumber
Weightkg
15.5
31.0
54.0
12.0
Strokemm
152
152
152
152HPC106
HPC306
HPC506
HPC106C 10
30
50
10
Oil cap.cm³
228
636
1078
228
A (min)
674665
797
957
B (max)
817826
849
1109
D
11458
145
149
AB
DC
E
3235
42
52
EC
8080
122
153
CD
E
B
A
Please Note......
Aluminium cylinders offer the benefit of greatly reduced weight compared to conventional steel cylinders however, due to the inherent nature of the material, are not recommended for use in high cycle production applications. The recommended life cycle is estimated at approximately 5000 operations at maximum pressure, which in most lifting and maintenance applications represents a more than acceptable period of usage.
Protective bellows are fitted
as standard
HPC106 c/w bellows
Hand and powered pumps suitable for use with HPC range pull cylinders are detailed on pages 10 - 21.
Single acting, spring assisted return
42 43
6
Model Dimensions in mmCapacityTonnesnumber
HHS101HHS102
HHS106HHS202
HHS206
HHS302HHS306
HHS603
HHS606
HHS1003HHS1006
1111
1123
23
3333
61
61
102102
Strokemm
2550
15250
150
50152
76
150
76150
Oil cap.cm³
3979
240167
500
233710
651
1285
10882147
Weightkg
2.83.0
10.27.0
13.8
10.619.2
28.0
40.6
64.075.0
A
110140
297160
306
165320
226
315
276350
B
7070
70100
100
115115
160
160
213213
C
3838
3851
51
6060
92
92
127127
D
2020
2030
30
3535
55
55
8181
Single acting, spring assisted return
HHS - SINGLE ACTING HOLLOW PISTON CYLINDERS
Low friction bearing surfaces
Optional piston rod saddles
Piston rod QPQ processed to reduce wear and corrosion
A
B
C
D
Model Dimensions in mmnumber
Weightkg
12.217.6
30.6
41.6
68.5
90.0
170.0269.0
52.5
25.7
HHR302HHR306
HHR603
HHR606
HHR1003
HHR1006
HHR2508
HHR6010
HHR3012
HHR1508
Capacity Tonnes
2424
38
38
43
43
7671
38
24
Push Pull
3333
61
61
102
102
247152
61
33
Strokemm
51150
76
152
76
152
203203
254
305
Oil cap.cm³
238701
652
1304
1087
2174
70394320
2179
1424
A
180279
239
315
310
386
505
417
434
503
B
115115
160
160
213
213
350
160
115
270
D
102
3535
55
55
80
80
150
55
35
C
184
60.360.3
92
92
140
140
254
92
60.3
HHR - DOUBLE ACTING HOLLOW PISTON CYLINDERS
Double acting design
Annular area overload protection valve
Low friction bearing surfaces
Piston rod QPQ processed to reduce wear and corrosion
B
A
D
C
7
Model Dimensions in mmnumber
HDA256HDA506
HDA5013HDA1006
HDA10013
HDA1506
HDA2006
HDA20012HDA3006HDA4006
HDA5006
HDA15012
C
50
79
79114
114
114
140
140165
216
203
114
Capacity TonnesPush Pull
25
50
50109
109
152
203
203326
398
520
152
10
15
1536
36
79
-
-
-
79
94
94
Strokemm
152
152
330152
330
152
152
305152
152
152
305
Oil cap.cm³
0.53
1.08
2.352.33
5.06
3.26
4.33
8.696.95
8.49
11.09
6.53
Weightkg
15.0
28.4
42.668.5
96.5
90.0
129.8
167.4193.0
286.0
372.0
120.5
A
287
295
473304
482
310
327
480409
431
470
463
B
92
127
127185
185
210
254
254312
360
397
210
A
B
C
Internal annular area overload protection valve
Low friction bearing surfaces
Piston rod QPQ processed to reduce wear and corrosion
Anti-extrusion seals
HDA - DOUBLE ACTING HIGH TONNAGE CYLINDERS
Flat saddle
Piston rod thread
Cylinder collar thread with protector
Tilting saddle
Piston rod without thread
Excluding cylinder collar thread
Up to 203 tonnes :
From 326 tonnes :
CHARACTERISTICS
Models from 50 to 109 tonnes fitted with lifting rings
Models from 152 to 520 tonnes are supplied with eyebolts
Optional piston rod saddles (see page 9)
44 45
8
Single acting load return design
Model Dimensions in mmnumber
Weightkg
Oil cap.cm³
Capacitytonnes
50
109152
260
520
14.2
27.944.0
69.4
186.0
B
127
185216
273
400
HFL502HFL1002HFL1502HFL2502
HFL5002
Strokemm
51
5045
45
45
0.36
0.771.07
1.65
3.29
A
125
137150
159
192
C
95
140165
216
305
Low friction bearing surfaces
Anti-extrusion seals
Piston rod QPQ processed to reduce wear and corrosion
A
B
C
HFL - SINGLE ACTING LOW HEIGHT FAILSAFE LOCK RING CYLINDERS C
B
A
Model Dimensions in mmnumber
Capacitytonnes
Weightkg
20.6
25.0
95.4
84.0
89.5
137.0
228.5
308.5
457.0
50.365.4
Oil cap.cm³
0.73
1.07
1.42
2.14
3.21
4.33
6.87
8.44
11.10
1.532.30
A
B
C
HFG504
HFG506
HFG1504
HFG1506
HFG2006
HFG3006
HFG2002
HFG4006
HFG5006
HFG1004HFG1006
50
50
152
152
203
326
398
520
203
109109
Strokemm
102
150
100
150
152
150
151
152
50
100150
C95
95
190
165
165
190
241
267
305
140140
A224
272
261
288
338
362
417
459
498
240311
B127
127
254
216
216
254
310
360
400
185185
Single acting load return design
Piston rod QPQ processed to reduce wear and corrosion
Low friction bearing surfaces
Anti-extrusion seals
HFG - SINGLE ACTING FAILSAFE LOCK RING CYLINDERS
9
Cylinderrange
F i t t e d a s s t a n d a r d A v a i l a b l e o p t i o n s
Saddlemodel No.
Seefigure
Cylindercapacity
Cylinderrange
Saddlemodel No.
Seefigure
Cylindercapacity
HSS
HSS
HSS
HSS
HSS
HSS
HSS
HSS
HHS
HHS
HHS/R
HHS/R
HHS/R
HHR
HDA
HDA
HDA
HDA
HDA
HDA
HDA
HDA
HFG
HFG
HFG
HFG
HFG
HFG
HFG
HFL
HFL
HFL
HFL
HFL
HHR
HAS
HAS
HAS
HA5
HA10
HA15
HA25
HA25
HA50
HA75
HA100
HA102
HA202
HA302
HA603
HA1003
HA2508
HD25
HD50
HD100
HD150
HD200
HD300T
HD400T
HD500T
TS50
TS100
TS150
TS200
TS300
TS400
TS500
TS50
TS100
TS150
TS250
TS500
HA1508
HA50
HA30
HA100
1
1
1
1
1
2
2
2
4
4
4
4
4
4
3
3
3
3
3
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
4
2
2
2
4.5
10
14.5
25
29
50
73
109
11
23
33
61
102
247
25
50
109
152
203
326
398
520
50
109
152
203
326
398
520
50
109
152
260
520
152
32
51
110
HSS
HSS
HSS
HSS
HSS
HSS
HSS
HSS
HHS
HHS
HHS/R
HHS/R
HHS/R
HHR
HAS
HAS
HAS
-
HAT50
HAT75
HAT100
HA102T
HA202T
HA302T
HA603T
HA1003T
HAT10
HAT25
HA1508T
HAT50
HAT30
HAT100
-
7
7
7
5
5
5
5
5
9
9
5
7
7
7
4.5
10
14.5
25
29
50
73
109
11
23
33
61
102
HHR HA2508T 5247
HDA
HDA
HDA
HDA
HDA
HDA
HDA
HDA
HD25T
HD50T
HD100T
HD150T
HD200T
HD300
HD400
HD500
9
9
9
9
9
2
2
2
25
50
109
152
203
326
398
520
152
32
51
110
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 7
Fig. 8
Fig. 9
HAT10 9
HAT25 9
Fig. 6
HHS
HHS
HHS/R
HHS/R
HHS/R
HA102G
HA202G
HA302G
HA603G
HA1003G
6
6
6
6
6
11
23
33
61
102
HHR HA1508G 6152
HHR HA2508G 6247
46 47
10
Model Dimensions in mmCnumber
Single speed manually operated pumps for single acting cylinders and tools
HP227
Two speed manually operated pumps for single acting cylinders and tools
Weightkg
A
B
C
10.5
HP110 5.6 145
145HP257
Valvetype
2-way
2-way
2-way
oil cap.litres
Usable
2.3
1.0
5.0
effortkg
Handle
38
45
38 15.2
A
597
566
597
B
168
128
168 150
Oil reservoir capacity up to 5 litres
Durable steel construction
External pressure release valve
Factory set safety relief valve
HP - MANUALLY OPERATED PUMPS - STEEL
Model Dimensions in mmnumber
effortkg
Handle
Two speed manually operated pump for single acting cylinders and tools
Two speed manually operated pump for double acting cylinders and toolsHP245
HP245D
Valvetype
2-Way
4-Way
per stroke cm³Displacement
nd2 stage1 stagest
12.9 2.3
2.9 -
12.9 2.3
per stroke cm³Displacement
nd2 stage1 stagest
113
113
4
4
oil cap.litres
Usable
10
10
40
40
Weightkg
29.5
31.0
A
700
700
B
205
205
C
270
270
Durable steel construction
Factory set safety relief valve
Changeover pressure 28 Bar
Low handle effort characteristics
HP - MANUALLY OPERATED PUMPS - HIGH FLOW STEEL
C
BA
C
A
B
Model Dimensions in mmnumber
oil cap.litres
Usableeffort
kg
Handle Weightkg
Two speed manually operated pumps for single acting cylinders and tools
Two speed manually operated pumps for double acting cylinders and tools
HP232D
HP252D
HP212
HP232
HP252
HP211
Valvetype
4-way
4-way
2-way
2-way
2-way
2-way
2.0
5.0
1.0
2.0
5.0
0.5
40
40
40
40
40
27
8.7
13.6
4.0
6.9
9.6
2.0
A
385610
610
610
625
625
C
125125
155
145
175
175
B
140
160
160
160
160
135
Oil reservoir capacity up to 5 litres
Lightweight aluminium construction
External pressure release valve
Factory set safety relief valve
HP - MANUALLY OPERATED PUMPS - ALUMINIUM
per stroke cm³Displacement
nd2 stage1 stagest
12.9
12.9
12.9
12.9
12.912.9
2.3
2.3
2.3
2.3
2.31.0
11
Factory set relief valve
XHP - MANUALLY OPERATED HIGH PRESSURE PUMP
External pressure release valve
XHP1500 fitted with pressure gauge as standard
Lightweight aluminium construction
AB
C
Pump specification :
Optional gauge kit (for XHP2800 only) :
Supplied including adaptor to fit ¾”-16 UNF pump outlet port and 3m hose assembly with swivel fittings on both ends.
XHP2800GK 9/16”-18 UNF 237170
Dimensions in mmModelnumber
XHP1500 ¼” BSP¾”-16 UNF
C
170157XHP2800
0.71.0
Usable oilcapacity
litres B
110170
Working pressure
Bar
15002800
Displacementper stroke (cm³) Outlet
port kgWeight
1 stagest 2 stagend
20.014.0
1.000.65
7.06.9
A
620620
Dimensions in mmModelnumber A B C
1.5
kgWeight
Inner scalereading
PSI
Outer scalereading
BarInlet & outlet
port
0-45000 0-3000 738
Dimensions in mmModelnumber kg
Weight
Two stage operation
HP227FP - FOOT OPERATED PUMP
700 Bar maximum working pressure
Ideally suited for use with Hi-Force CH series crimper heads
Durable steel construction
14.52.3
oil cap.litres
Usable
2-way
Valvetype
2-way
Displacementper stroke (cm³)1 stagest 2 stagend
12.9 2.3
12.9 2.3 2.3
39
effortkg
Handle
39 12.5
B
200
200
A
763
715
C
227
185
HP227FPC
HP227FP
A
C
B
HP227FPC is supplied complete with pressure gauge, gauge mounting block and 3 metre hose assembly.
48 49
19
AHP1141, AHP1142
Choice of 2-way or 4-way control valves
AHP11 - AIR DRIVEN PUMP
Internal safety overload valve
Standard oil reservoir capacities up to 10 litres
Reservoir oil sight level gauge
Dimensions in mmModelnumber
Oil cap.litres
AHP1141
AHP1120AHP1121AHP1122
AHP1142
ValveType
4-way
2-way
2-way2-way
4-way5.0
2.4
5.010.0
10.0
Air inletconnection
G
1/4"
1/4"
1/4"1/4"
1/4"
Oil outletconnection
NPTF
3/8"
3/8"
3/8"3/8"
3/8"
Weightkg
9.5
4.7
9.017.8
18.3
B
157
240
240
210
210
* Not applicable
A
560
560
365
420
420
C
210
223274
265
315
AHP1120, AHP1121, AHP1122
A
BC
B C
2.8 bar 4.2 bar 5.6 bar 6.9 bar 8.3 bar
Airline pressure
Air consumption400 L/min
0
0.2
0.4
0.6
0.8
1
1.2
0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750
Hydraulic Pressure (Bar)
Hyd
raul
ic fl
ow (l
/min
)
Oil Flow / Pressure Chart
Please suffix model number with ‘R’ for remote pendant options to suit AHP1120,AHP1121 and AHP1122.
OPTIONAL REMOTE PENDANT:
Filter, regulator & lubricator units for use in combination with air driven pump units are also available.
Please see page 39 for more details.
FRL -FILTER REGULATOR LUBRICATOR UNIT:
A
20
Dimensions in mmModelnumber
Two stage hydraulic pump unit
A
B
C
Oil cap.litres
10
60
25
40
10
2540
25
60
10
40
60
10
60
2540
MotorkW 3.0
3.0
3.0
3.03.0
3.03.0
3.0
3.0
3.0
3.0
3.0
3.0
3.03.0
3.0
C393
422
531
552393
422531
552
393
422
531
552
393
422531
552
B246
306
306
406246
306306
406
246
306
306
406
246
306306
406
A438
570
560
583438
570560
583
438
570
560
583
438
570560
583
HAP21011
HAP21012HAP21014HAP21016HAP21021HAP21022HAP21024
HAP21026
HAP21031
HAP21032
HAP21034
HAP21036
HAP21041HAP21042HAP21044
HAP21046
ValveType
P-T Plate
2-way
4-way
P-T Plate
P-T Plate
P-T Plate2-way
2-way
2-way
3-way
3-way
3-way
3-way
4-way4-way
4-way
Weightkg
41.5
57.5
71.5
96.542.0
58.072.0
97.0
42.0
58.0
72.0
97.0
42.0
58.072.0
97.0
HAP - AIR DRIVEN PUMPS - GENERAL DUTY HIGH FLOW
Powerful air motor
Choice of control valves
Manual valve with load holding feature fitted as standard
Roll frame
Protective Roll Frame
PPA10RF
PPA25RF
All pumps with 10L tank
PPA40RF All pumps with 40L tank
PPA60RF All pumps with 60L tank
All pumps with 25L tank
Modelnumber For all HAP Models
OPTIONAL EXTRAS FOR AIR DRIVEN PUMPS
Modelnumber For all HAP Models
PPA40WT Wheel trolley for all 25
PPA60WT
and 40 litre model pumps
Wheel trolley for all 60 litre model pumps
Wheel Trolley
All pumps can be supplied with factory fitted roll frame. Please suffix pump model number with ‘P’.
Wheel trolley
All pumps can be supplied with factory fitted wheel trolley. Please suffix pump model number with ‘WT’.
50 51
22
700 Bar max working pressure
HIGH PRESSURE HYDRAULIC HOSES
Safety factor 4:1
Choice of hose end combinations
Hand grip and protective strain relievers
LengthMetres
10.012.015.0
25.0
0.51.0
2.0
3.04.05.0
6.0
30.0
20.0
HH0.5HH1
HH2
HH3
HH30
HH4HH5
HH6HH10HH12HH15
HH20
HH25
HC0.5HC1
HC2
HC3
HC30
HC4HC5
HC6HC10HC12HC15
HC20
HC25
HC0.5CHC1C
HC2C
HC3CHC4CHC5C
HC6CHC10CHC12CHC15C
HC20C
HC25C
HC30C
No couplers - 18 NPT male 38”/
fittings both ends- 18 NPT male fitting one end 3
8”/
with CM1 coupler fitted one end fitted both endsCM1 male couplers
Hose bore is 6.6mm and outside diameter is 12.7mm for all models
HH0.5RHH1R
HH2R
HH3R
HH30R
HH4RHH5R
HH6RHH10RHH12RHH15R
HH20R
HH25R
HC0.5RHC1R
HC2R
HC3R
HC30R
HC4RHC5R
HC6RHC10RHC12RHC15R
HC20R
HC25R
HC0.5CRHC1CR
HC2CR
HC3CRHC4CRHC5CR
HC6CRHC10CRHC12CRHC15CR
HC20CR
HC25CR
HC30CR
Black Red Black Red Black Red
OIL, COUPLERS & FITTINGS
HYDRAULIC OIL
Description ThreadCF1 Female Coupler
CM1 Male Coupler
CMF1 Complete coupler
CF2 Female Coupler
CM2 Male Coupler
CMF2 Complete Coupler
CFD1 Metal dust cap for CF1
CMD1 Metal dust cap for CM1
CFD2 Metal dust cap for CF2
CMD2 Metal dust cap for CM2
3/8"- NPT male
3/8"- NPT female
3/8"- NPT
1/4"- NPT male
1/4"- NPT female
1/4"- NPT
HFO46-1 1
HFO46-5 5
1
525 HFO46-25 25
Capacity(Litres)
Capacity(Litres)
HFO32-1
HFO32-5HFO32-25
Description
HF7 Nipple 1/4" NPT male to 1/4" NPT male
HF10 Elbow 3/8" NPT female to 3/8" NPT female
HF14 Adaptor 3/8" NPT female to 3/8" NPT female
HF12 Equal tee 3/8" NPT female
HF13 Cross 3/8" NPT female
HF15 Reducer 3/8" NPT female to 1/4" NPT female
HF17 Nipple 3/8" NPT male to 3/8" NPT male
HF19 Nipple 3/8" NPT male to 3/8" NPT male - long
HF30 Reducer 3/8" NPT male to 1/4" NPT female
HF33 Reducer 3/8" NPT male to 1/4" BSPT female
HF55 Reducer 3/8" NPT female to 1/4" NPT male
HF69
HF16 Elbow 3/8" NPT female to 3/8" NPT female
HF24 Adaptor 3/8" NPT male to 3/8" BSP female
HF31 Tee 3/8" NPT female to 3/8" NPT male
HF27 Nipple 1/4" NPT male to 3/8" NPT male
HF8 Adaptor 1/4" NPT female to 1/4" NPT female
Adaptor 1/2" BSP male to 3/8" NPT female
Model Number Model
Number
Model Number
Model Number
23
HM* & HM*L
A
B
C
D
HM5
E F
B
C
HM*C
C
B
A
D
D
D
Working pressure 700 Bar
MANIFOLDS
Choice of open or controlled manifolds
2,4,5,6 or 8 outlet port models available
Choice of 9 models
-
-
38---
-
-
-
Model no. Description
4-Way controlled manifold unit, suitable for single acting systems.
Supplied complete with four pressure gauges, reading 0-700 Bar, female coupler on inlet port and four female couplers on outlet ports. All mounted on a sturdy framework.
HM4C-SU
4-Way controlled manifold unit, suitable for double acting systems.
Supplied complete with four pressure gauges, reading 0-700 Bar, female coupler on inlet port and four female couplers on outlet ports. Also included is a 4-way open manifold for return flow, again with female couplers on inlet and outlet ports.All mounted on a sturdy framework.
HM4C-DU
ModelnumberHM2HM4HM5HM6
HM6L
HM2CHM4C
HM4LHM8
manifold
manifoldmanifold
manifold
manifold
controlled manifoldcontrolled manifold
manifoldmanifold
Type Designparallel
parallelhexagon
parallel
extended parallel
parallelparallel
extended parallelparallel
ofoutlets
Number
2
45
6
6
24
48
83/2 x ”-18NPT
83/4 x ”-18NPT
83/5 x ”-18NPT
83/6 x ”-18NPT
83/6 x ”-18NPT
83/2 x ”-18NPT
83/4 x ”-18NPT
83/4 x ”-18NPT83/8 x ”-18NPT
”-18NPT83/
”-18NPT83/
”-18NPT83/
”-18NPT83/
”-18NPT83/ ”-18NPT83/
”-18NPT83/
”-18NPT83/
”-18NPT83/
Female ThreadsInlet Outlet
Modelnumber
HM2
HM4
HM5HM6
HM6L
HM2C
HM4C
HM4LHM8
1.0
1.5
0.72.0
3.7
2.0
3.5
2.42.5
Weightkg
Dimensions in mmA B C F
114
214
-314414394
614
150
350
32
32
41323232
32
51
51
32
32
51323232
32
38
38
D
50
50
-5050
110
110
100
100
E
-
-
M6---
-
-
-
HM2
HM4
HM6
HM4C HM4C-SU HM4C-DU
52 53
24
GAUGE MOUNTING BLOCKS:
Manufactured to EN837-1
Clear precise dual scale readings
PRESSURE GAUGES & GAUGE MOUNTING BLOCKS
Accurate to +/ -1% of full scale
Calibration certificates on request
GAUGES :
ModelnumberHG63G
HG1
HG1GHG5
HG10HG11HG20HG23
HG25
HG32
HG33HG50
HG61
HG102
HG109
HG2
HG2G
Gaugediameter
mm63
100
150
100100
100
100
100
100
100
100
100100
100
100
100
150
typeGauge Reading
scaleInner
0-700 Bar
0-1.000 Bar
0-700 Bar0-700 Bar
0-700 Bar
0-700 Bar
0-700 Bar
0-700 Bar
0-700 Bar
0-700 Bar
0-700 Bar0-700 Bar
0-700 Bar
0-700 Bar
0-700 Bar
0-700 Bar
0-700 Bar
Inletthread
½”-14NPT
¼”-18NPT
Weightkg
0.9
1.00.9
0.9
0.9
0.9
0.9
0.9
0.9
0.90.9
0.9
0.9
0.9
1.6
1.7
0.2glycerine
dry
glycerine
glycerine
dry
dry
dry
dry
dry
dry
dry
drydry
dry
dry
dry
dry
ReadingOuterscale
0-15.000 Psi
0-10.000 Psi
0-10.000 Psi
0-10.000 Psi
0-10.000 Psi0-4.5 tonnes
0-10 tonnes
0-11 tonnes
0-20 tonnes
0-23 tonnes
0-109 tonnes
0-102 tonnes
0-61 tonnes
0-50 tonnes0-33 tonnes
0-32 tonnes
0-25 tonnes
½”-14NPT½”-14NPT
½”-14NPT
½”-14NPT
½”-14NPT
½”-14NPT
½”-14NPT
½”-14NPT
½”-14NPT½”-14NPT
½”-14NPT
½”-14NPT
½”-14NPT
½”-14NPT
½”-14NPT
ModelnumberHGA1HGA2
HGA1-25HGA2-25
Gaugethread
½”-14NPT½”-14NPT
¼”-18NPT¼”-18NPT
Weightkg
0.250.85
0.30
0.90
Outletthread
83 ”-18NPT female/
83 ”-18NPT female/
83 ”-18NPT female/
83 ”-18NPT female/
Inletthread
83 ”-18NPT male/
83 ”-18NPT male/
83 ”-18NPT male/
83 ”-18NPT male/
Compatible
All models
All models
All models
All models
All models
All 4.5 tonnes models
All 10 tonnes models
All 11 tonnes models
All 20 tonnes models
All 23 tonnes models
All 25 tonnes models
All 32 tonnes models
All 33 tonnes models
All 50 tonnes models
All 61 tonnes models
All 102 tonnes models
All 109 tonnes models
Hi-Force cylinders
Lengthmm
Widthmm
Heightmm
75
17075
170
3232
32
32
32
32
32
32
Pre
ssur
e in
Bar
Reading in tonnes0 10 20 30 40 50 60 70 80 90 100 110
100
200
300
400
500
600
700
A B C D E F
G H I J K L
= HG5= HG10= HG11= HG20= HG23= HG25
= HG32= HG33= HG50= HG61= HG102= HG109
A
B
C D
E
F
G
H I J K L
GAUGE TONNAGE CHART:
26
Modelnumber
Strokemm35
41
45
JCS10
JCS20
JCS30
Capacitytonnes
10
20
30
MaterialSteel
Aluminium
Aluminium
Dimensions in mm
4.5
5.5
8.0
Weightkg
Capacities from 10 to 30 tonnes
JCS - COMPACT JACKS - SOLID PISTON
Operates in any position
Lightweight and compact
Spring assisted return C
D
A
B
A76
102
112
B240
257
281
C70
101.5
125
D38
51
60
Modelnumber
Capacities of 13 and 21 tonnes
Dimensions in mmA
JCH13
JCH21
13
21
Capacitytonnes
41
45
StrokemmMaterial
Aluminium
Aluminium
JCH - COMPACT JACKS - HOLLOW PISTON
Operates in any position
Lightweight and compact
Hollow piston design for greater versatility
Weightkg5.5
8.0
C
D
A
B
95
114
B257
281
C101.5
125
D
51
60
Modelnumber
Dimensions in mm
Strong, rigid steel construction
JSS - STEEL BOTTLE JACKS
From JSS166 upwards, all models include carrying handle
All models supplied with tubular operating lever
Suitable for industrial and automotive use
35
10
16
20
32
50
100
Capacitytonnes
Strokemm
-
-
-
-
7090
90
95
Screw
mmextension
JSS35JSS55
JSS106
JSS166
JSS207
JSS327
JSS507
JSS1007
135135
174
178
190
190
195
195
Weightkg3.04.0
7.0
10.0
15.0
22.0
32.0
69.0
B
A
C
D
A195200
243
255
280
285
300
340
B100110
135
160
127
152
177
265
C100110
135
160
127
152
177
265
D2832
43
5356
7185
117
E
E
25
35
54 55
27
Dimensions in mmModelnumber
Weightkg
Jackcapacitytonnes
Toecapacitytonnes
Strokemm
Capacity 5 tonnes
HCJ - STEEL TOE JACK
Strong rigid steel construction
Toe guided over full stroke length
Piston enclosed within toe
HCJ5 5 5 175 18
C
219
B
41
A
327
D
114
D
A
B
C
Dimensions in mmModelnumber
Multi-position lifting toe
HMJ - STEEL MACHINE LIFT JACKS
Remote operation gives improved operator safety
Can be used for simultaneous multiple lift point applications
Stroke length 150mm
HMJ10HMJ25
CapacityToe
tonnesHead
tonnesStroke
mm
8.520
1025
150150
Weightkg
29.255.1
A
B
CD
C
187211
B
2535
A
272330
D
202292
HYDRAULIC JACK APPLICATIONS
37
Suitable for use with TWS-N & TWH-N Wrenches
BW - BACKUP WRENCHES
Interchangeable hexagon links
Positive release mechanism
Rigid & lightweight
Individual components:
Complete set:
Modelnumber Description
BWI-SET
BWM-SET
Modelnumber Description
Holder complete with imperial link set (12 pcs)
Holder complete with metric link set (14 pcs)
Backup wrench holder incl. set of links:From To
Imperial Metric Imperial Metric 16/ ”71 -
- 36mm3 7/8”
100mm-
-
BWI-107
BWI-110
BWI-113
BWI-200
BWI-203
BWI-206BWI-209
BWI-212
BWI-215BWI-302
BWI-314
BWI-308
BWM-36BWM-41BWM-46BWM-50
BWM-55
BWM-60BWM-65
BWM-70BWM-75BWM-80
BWM-85
BWM-90BWM-95BWM-100
BWH Backup wrench holder
Female hexagon link for backup wrench (imperial)
Female hexagon link for backup wrench (imperial)
Female hexagon link for backup wrench (imperial)Female hexagon link for backup wrench (imperial)
Female hexagon link for backup wrench (imperial)
Female hexagon link for backup wrench (imperial)
Female hexagon link for backup wrench (imperial)Female hexagon link for backup wrench (imperial)Female hexagon link for backup wrench (imperial)Female hexagon link for backup wrench (imperial)
Female hexagon link for backup wrench (imperial)
Female hexagon link for backup wrench (imperial)Female hexagon link for backup wrench (metric)
Female hexagon link for backup wrench (metric)
Female hexagon link for backup wrench (metric)Female hexagon link for backup wrench (metric)
Female hexagon link for backup wrench (metric)Female hexagon link for backup wrench (metric)
Female hexagon link for backup wrench (metric)Female hexagon link for backup wrench (metric)Female hexagon link for backup wrench (metric)
Female hexagon link for backup wrench (metric)
Female hexagon link for backup wrench (metric)
Female hexagon link for backup wrench (metric)Female hexagon link for backup wrench (metric)Female hexagon link for backup wrench (metric)
The Hi-Force BW series of back up wrenches provides an easily fitted and easily removable back nut reaction arm to prevent both nuts rotating during tightening applications. The T-Bar design adjustable reaction point prevents lock up once tightening is completed.
Hexagon AF sizeImperial Metric
5/8”1
38 ”2 /
9/ ”2 16
3/”2 4
18”3 /
12”3 /
78”3 /
16”1 7/
/16”113
2 ”/16”2 3
16/ ”2 15
--------------
------------
36mm
41mm46mm
50mm
85mm
90mm
80mm75mm
70mm65mm
60mm55mm
100mm95mm
- -
56 57
40
STS - TOPSIDE BOLT TENSIONERS - IMPERIAL RANGE
Modelnumber
Capacities from 234 to 2649 kN
Working pressure 1500 Bar
Single acting design
Choice of manually operated or air powered pumps available (see page 45)
CapacitykN tonnes
STS2-125B1
STS2-150B1
STS3-200B2STS4-187B1
STS4-225B2
STS4-250B2
STS5-275B1STS5-300B1
STS6-300B1STS6-325B1STS6-350B1STS6-375B3STS6-400B3
STS1-075B1STS1-087B1STS1-100B2
STS1-112B2
STS2-137B1
STS3-162B1
STS4-200B1
STS3-175B1
STS3-187B1STS3-187B2
STS3-175B2
STS4-200B2
STS5-250B1
38”1
STS4-250B2
14/ ”1
34/”
78/”
1”1
8/”1
Bolt thread
size
12/”1
2”7
8/”1
2”1
4/”21
2/”2
34/”2
3”3”1
4/”31
2/”33
4/”3
4”
/
58/”1
2”
34/”1
78/”1
78/”1
34/”1
12/”2
Threadsperinch
8
8
8
8
888
8
88
8888
1098
8
8
8
8
8
88
8
8
457
457
822
1264
126412641264
1833
18331833
26492649264926492649
234234234
234
457
822
1264
822
822822
822
46.6
46.6
83.8
128.9
128.9128.9128.9
186.9
186.9186.9
270.0270.0270.0270.0270.0
23.923.923.9
23.9
46.6
83.8
128.9
83.8
83.883.8
83.8
EffectiveAreacm2
30.5
30.5
54.8
84.3
84.384.384.3
122.2
122.2122.2
176.6176.6176.6176.6176.6
15.615.615.6
15.6
30.5
54.8
84.3
54.8
54.854.8
54.8
Strokemm
15
15
15
15
151515
15
1515
1515151515
101010
10
15
15
15
15
1515
15
3.5
3.5
6.1
10.6
10.610.610.6
16.0
16.016.0
23.523.523.523.523.5
1.71.71.7
1.7
3.5
6.1
10.6
6.1
6.16.1
6.1
WeightKg
Dimensions in mmA B C
Note: Weight is for load cell and bridge only. Total weight of complete assembly depends on size of puller and nut rotating socket selected. Tommy bars are not included. Hi-Force recommends one tommy bar for every four tensioners, please see below table for ordering code.
A
B
C
Force
102
102
133
163
163163163
193
193193
233233233233233
7474
74
74
102
133
163
133
133133
133
39
39
50
50
626262
73
7373
848484
105105
2828
3030
39
47
50
47
4750
50
128
128
155
149
149165165
187
187187
216216216257257
9090
98
98
128
150
149
150
150155
155
Tensioner BarTommy
STS1STS2
STS3STS4STS5STS6
TTB06TTB08
TTB10
TTB14TTB14
TTB10
41
STS - TOPSIDE BOLT TENSIONERS - METRIC RANGE
Modelnumber
Capacities from 234 to 2649 kN
CapacitykN tonnes
STS4-250B2
Bolt thread
size
EffectiveAreacm2
Strokemm
WeightKg
Dimensions in mmA B C
Note: Weight is for load cell and bridge only. Total weight of complete assembly depends on size of puller and nut rotating socket selected. Tommy bars are not included. Hi-Force recommends one tommy bar for every four tensioners, please see below table for ordering code.
Threadpitch
STS3-M42B1
STS3-M48B1
STS4-M48B1STS4-M52B1
STS4-M56B2STS4-M60B2STS4-M64B2STS5-M64B1STS5-M68B1STS5-M72B1STS5-M76B1STS6-M76B1
STS6-M85B1
STS6-M95B3
STS2-M30B1STS2-M33B1STS2-M36B1STS2-M39B1
STS3-M45B1
STS3-M52B2
STS1-M24B2
STS1-M16B1STS1-M18B1STS1-M20B1STS1-M22B2
STS1-M27B2
STS3-M45B2
STS3-M48B2
STS4-M52B2
822
822
12641264
12641264
12641833
183318331833
26492649
264926492649
2649
457457
457457
822
822
234
234
234
234
234
234
822
822
1264
54.8
54.8
84.384.3
84.384.3
84.3122.2
122.2122.2122.2
176.6176.6
176.6176.6176.6
176.6
30.530.5
30.530.5
54.8
54.8
15.6
15.6
15.6
15.6
15.6
15.6
54.8
54.8
84.3
M42
M48
M48M52
M56M60
M64M64
M68M72M76
M76M80
M85M90M95
M100
M30M33
M36M39
M45
M52
M24
M16
M18
M20
M22
M27
M45
M48
M52
4.5
5
55
5.55.5
66
666
66
666
6
3.53.5
44
4.5
5
3
2
2.5
2.5
2.5
3
4.5
5
5
STS6-M80B1
STS6-M90B1
STS6-M100B3
83.8
83.8
128.9128.9
128.9128.9
128.9186.9
186.9186.9186.9
270.0270.0
270.0270.0270.0
270.0
46.646.6
46.646.6
83.8
83.8
23.9
23.9
23.9
23.9
23.9
23.9
83.8
83.8
128.9
15
15
1515
1515
1515
151515
1515
151515
15
1515
1515
15
15
10
10
10
10
10
10
15
15
15
6.1
6.1
10.610.6
10.610.6
10.616.0
16.016.016.0
23.523.5
23.523.523.5
23.5
3.53.5
3.53.5
6.1
6.1
1.7
1.7
1.7
1.7
1.7
1.7
6.1
6.1
10.6
Modular design for optimum versatility
Working pressure 1500 Bar
Single acting design
133
133
163163
163163
163193
193193193
233233
233233233
233
102102
102102
133
133
74
74
74
74
74
74
133
133
163
47
47
5050
6262
6273
737373
8484
8484
105
105
3939
3939
47
50
30
28
28
28
30
30
50
50
62
150
150
149149
165165
165187
187187187
216216
216216257
257
128128
128128
150
155
98
90
90
90
98
98
155
155
165
A
B
C
Force
Tensioner BarTommy
STS1STS2
STS3STS4STS5STS6
TTB06TTB08
TTB10
TTB14TTB14
TTB10
58 59
42
STS-SR - SPRING RETURN BOLT TENSIONERS - IMPERIAL
Modelnumber
CapacityKn Tonnes
1846
1846
18462657
2657
26572657
2657
188.2
188.2
188.2270.8
270.8
270.8270.8
270.8
Boltthread
size123.1
123.1
123.1177.1
177.1
177.1177.1
177.1
cm2
EffectiveArea
StrokeWeight
kg23.2
23.2
23.235.9
35.9
35.941.1
41.1
A B CDimensions in mm
STS5-250SR
STS5-275SR
STS5-300SR
STS6-325SRSTS6-350SR
STS6-400SR
STS6-375SR
STS6-300SR
”/122
4/3 ”2
”3
”3
”/1 431/2”3
4”3/3
”4
ThreadPitch
8
8
88
8
88
8
15
15
1515
15
1515
15
Imperial bolt size range from 2 to 4”1/2”
Maximum working pressure 1500 Bar
Spring assisted piston retraction
Maximum piston stroke indicator
STS-SR - SPRING RETURN BOLT TENSIONERS - METRIC
Modelnumber
CapacityKn Tonnes Stroke A B C
Dimensions in mm
15
15
1515
15
15
1515
Metric bolt size range from M64 to M100
Maximum working pressure 1500 Bar
Spring assisted piston retraction
Maximum piston stroke indicator
STS5-M64SR
STS5-M68SRSTS5-M72SR
STS6-M90SR
STS6-M76SR
STS6-M80SRSTS6-M85SR
STS5-M76SR
STS6-M100SRSTS6-M95SR
STS6-M95SR
STS6-M90SR
STS6-M76SR
Boltthread
sizeM64
M68
M72
M90
M76
M76
M80M85
M100M95
M95
M90
M76
ThreadPitch
6
6
6
6
6
6
66
66
4
4
4
1846
1846
1846
2657
26572657
1846
2657
26572657
2657
2657
2657
188.2
188.2
188.2
270.8
188.2
270.8270.8
270.8
270.8270.8
270.8
270.8
270.8
15
15
15
1515
cm2
EffectiveArea
123.1
123.1
123.1
177.1
177.1177.1
123.1
177.1
177.1177.1
177.1
177.1
177.1
Weightkg
23.2
23.2
23.2
35.9
35.935.9
23.2
35.9
41.141.1
35.9
35.9
41.1
A
B
C
A
B
C
84
84
84105
105
73
73
73
208
208
208229
229
229270
270
193
193
193233
233
233233
233
193
193
193
73
73
73
208
208
208
233 84 229
233233
8484
229229
193 73 208
233 84 229
105 270233233 105 270
233 84 229
233 84 229
233 105 270
43
Working pressure 1500 Bar
STU - SUB SEA BOLT TENSIONERS
Interchangeable quickfit/release pullers
Load cell with integral bridge
Available for imperial and metric stud bolts
Dimensions in mmModelnumber A B C
Weightkg
CapacityBoltthread
size kN Tonnes
Effective areacm2
Strokemm
STU3-150
STU4-175
STU5-200
STU5-225
STU6-250STU6-275STU7-300STU7-325
STU1-100
STU1-112
STU2-125STU2-137
STU3-162
STU4-187
30
30
30
30
30
3030
30
30
30
30
3030
30
30
STU7-350
1”
12/ ”1
34/ ”1
78/ ”1
14/”2
12/”2
18/ ”1
58/ ”1
14/ ”1
38/”1
2”
3”1
4/”31
2/”3
34/”2
- 8UN
- 8UN- 8UN- 8UN- 8UN- 8UN
- 8UN- 8UN
- 8UN- 8UN- 8UN
- 8UN- 8UN
- 8UN
- 8UN
553.39
756.30
1168.19
1168.19
1649.12
1649.122483.44
2483.44
2483.44
256.04
256.04
430.36430.36
553.39
756.30
56.41
77.09
119.08
119.08
168.11
168.11253.15
253.15
253.15
26.10
26.10
43.8743.87
56.41
77.09
36.89
50.42
77.88
77.88
109.94
109.94165.56
165.56
165.56
17.07
17.07
28.6928.69
36.89
50.42
7.5
9.8
14.5
14.5
22.8
22.835.6
35.6
35.6
3.4
3.4
6.06.0
7.5
9.8
Imperial
Topview Hi-Force quickfit threaded puller
114
128
148
148
176
176215
215
215
82
82
102102
114
128
35
41
48
48
60
6089
89
89
22
22
3030
35
41
169
181
202
202
231
231260
260
260
150
150
164164
169
181
ForceA
B
Dimensions in mmModelnumber A B C
Weightkg
CapacityBoltthread
size kN Tonnes
Effective areacm2
Strokemm
Metric
30
30
30
30
30
30
3030
30
30
30
3030
30
30
30
30
30
30
6.0
7.5
9.8
14.5
14.5
22.8
35.635.6
35.6
3.4
3.4
6.06.0
7.5
9.8
22.8
35.6
22.8
22.8
STU2-36
STU3-42
STU4-48
STU5-52STU5-56
STU6-72
STU7-85STU7-90
STU7-76
STU1-24STU1-27STU2-30STU2-33
STU3-39
STU4-45
STU7-80
STU6-64STU6-68
STU6-60
M36 x 4
M42 x 4.5
M48 x 5
M52 x 5
M56 x 5.5
M72 x 6
M85 x 6M90 x 6
M76 x 6
M24 x 3
M27 x 3
M30 x 3.5M33 x 3.5
M39 x 4
M45 x 4.5
M64 x 6
M80 x 6
M68 x 6
M60 x 5.5
430.36
553.39
756.30
1168.19
1168.19
1649.12
2483.442483.44
2483.44
256.04
256.04
430.36430.36
553.39
756.30
2483.44
1649.121649.12
1649.12
43.87
56.41
77.09
119.08
119.08
168.11
168.11
253.15253.15
253.15
26.10
26.10
43.8743.87
56.41
77.09
253.15
168.11
168.11
28.69
36.89
50.42
77.88
77.88
109.94
165.56165.56
165.56
17.07
17.07
28.6928.69
36.89
50.42
109.94
165.56
109.94
109.94
Topview Hi-Force quickfit threaded puller
102
114
128
148
148
176
215215
215
82
82
102102
114
128
176
215
176
176
30
35
41
48
48
60
9494
94
22
22
3030
35
41
60
94
60
60
164
169
181
202
202
231
260260
260
150
150
164164
169
181
231
260
231
231
C
60 61
44
HTN - HYDRAULIC TENSIONER NUTS
Integral mechanical load retaining collar
Working pressure 1500 Bar
Available in imperial and metric sizes
Supplied with quick connect hydraulic couplings
Modelnumber
Weightkg
CapacityKn Tonnes A B
Dimensions in mmStrokemm
Effective areacm2
13.22
14.42
16.86
20.3922.94
26.51
31.67
33.4337.58
49.76
60.34
66.6680.23
94.25107.00
113.64
127.43
HTN1-100
HTN2-112HTN3-125
HTN4-137HTN5-150
HTN6-162HTN7-175HTN8-187HTN9-200
HTN10-225
HTN11-250
HTN12-275HTN13-300
HTN14-325HTN15-350
HTN16-375
HTN17-400
Boltsize
1/81 ” - 8 UN/141 ” - 8 UN
38/1 ” - 8 UN
1/2 1 ” - 8 UN
3/4 1 ” - 8 UN7/81 ” - 8 UN
1” - 8 UN
5/8 1 ” - 8 UN
4/12 ” - 8 UN1/22 ” - 8 UN3/42 ” - 8 UN
3”- 8 UN1/43 ” - 8 UN
1/23 ” - 8 UN3/43 ” - 8 UN
4” - 8 UN
2” - 8 UN
198.27
216.30
252.94
305.83344.12
397.61
475.01
501.40563.72
746.44
905.13
999.851203.43
1413.721605.04
1704.59
1911.46
20.21
22.05
25.78
31.1835.08
40.53
48.42
51.1157.46
76.09
92.27
101.92122.67
144.11163.61
173.76
194.85
5
5
5
56
6
6
66
8
8
88
1010
10
10
1.9
2.0
2.4
2.72.9
3.5
4.0
4.24.9
6.4
8.0
8.810.6
12.916.2
18.3
21.9
Imperial
Modelnumber
CapacityKn Tonnes
Boltsize
Dimensions in mm
Metric
HTN5-M39
HTN7-M45
HTN9-M52HTN10-M56
HTN11-M64HTN12-M68
HTN13-M76
HTN16-M95HTN17-M100
HTN14-M80
HTN1-M24HTN2-M27
HTN3-M33HTN4-M36
HTN6-M42
HTN8-M48
HTN15-M90
HTN15-M85
HTN13-M72
HTN3-M30
HTN11-M60
M39 x 4
M45 x 4.5
M52 x 5
M56 x 5.5
M64 x 6M68 x 6
M76 x 6
M95 x 6M100 x 6
M80 x 6
M24 x 3M27 x 3
M33 x 3.5M36 x 4
M42 x 4.5
M48 x 5
M90 x 6
M85 x 6
M72 x 6
M30 x 3.5
M60 x 5.5
344.12
475.01
563.72
746.44
905.13999.85
1203.43
1704.591911.46
1413.72
198.27216.30
252.94305.83
397.61
501.40
1605.04
1605.04
1203.43
252.94
905.13
35.08
48.42
57.46
76.09
92.27101.92
122.67
173.76194.85
144.11
20.2122.05
25.7831.18
40.53
51.11
163.61
163.61
122.67
25.78
92.27
Effective areacm2
22.94
31.67
37.58
49.76
60.3466.66
80.23
113.64127.43
94.25
13.2214.42
16.8620.39
26.51
33.43
107.00
107.00
80.23
16.86
60.34
Strokemm
6
6
6
8
88
10
10
55
55
6
6
10
8
10
10
8
5
8
Weightkg
1.92.02.4
2.42.72.9
3.54.0
4.2
4.9
6.48.0
8.08.8
10.6
10.6
12.916.2
16.2
18.321.9
72
75
82
8893
100
106
110117
128
141
150162
174187
194
205
A55
55
55
57
5758
62
64
64
6774
78
87
102
110
95
81
77
A
B
B
93
106
117
128
141150
162
194205
174
7275
8288
100
110
187
187
162
82
141
5557
57575862
64
64
67
7477
7778
81
81
8795
95
102110
45
Operates from standard 7 Bar air supply
AHP-BTU - AIR DRIVEN PUMPS FOR BOLT TENSIONERS
Dimensions in mmModelNumber A B CAHP275BTU
Outletcoupler
Weightkg
Workingpressure
Bar
Usable oilcapacity
litres1500 STFC4 20 450 395
AHP2-237BTU 1500 STFC4 24 4501.66.1
Oil flowper stroke
cm3
77 390
395465
Air consumption 28 scfm (0.79 m 3 /minute)
Working pressure 1500 Bar
Quick release outlet coupling
Compact & lightweight design
XHP1500BTU MANUAL PUMP FOR BOLT TENSIONERS
Dimensions in mmA B C
Outletcoupler
Weightkg
Workingpressure
Bar
Usable oilcapacity
litresXHP1500BTU 1500 0.7 STFC4 620 170 18012.5 7.0
Displacementper stroke (cm3)Model
Number
Complete with pressure gauge
Working pressure 1500 Bar
Suitable for all tensioning applications on-site requiring reliable independant hydraulic power
Safety factor 3 : 1
BOLT TENSIONER HOSES, COUPLERS & HOSE REELS
¼” BSP nipple c/w bonded sealing washer (old design - not for STS1)
STMC4
STN1P4
ModelNumber
Maximumpressure Bar Description
XHC1.5B
XHC3B
XHC5B
XHC10B
STFC4
XHC50B
XHC100B
XHC150B
XHC200B
XHC250B
XHC300B
XHR1
STN1P2
STN1P4-C
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
Link hose complete with quick connect couplings, length 1.5 metres
Mainline hose complete with quick connect couplings, length 10.0 metres
Mainline hose complete with quick connect couplings, length 5.0 metres
Link hose complete with quick connect couplings, length 3.0 metres
Female coupling
Male coupling
Mainline hose complete with quick connect couplings, length 50.0 metres
Mainline hose complete with quick connect couplings, length 100.0 metres
Mainline hose complete with quick connect couplings, length 150.0 metres
Mainline hose complete with quick connect couplings, length 200.0 metres
Mainline hose complete with quick connect couplings, length 250.0 metres
Mainline hose complete with quick connect couplings, length 300.0 metres
Hose reel, suitable for up to 300 metres of XHC high pressure hose
¼” BSP nipple with cone seat seal (current design - not for STS1)
x ¼” BSP nipple for current model STS1 only1/8”
Working pressure up to 1500 Bar
Supplied with quick connect couplings
10 standard lengths are available with special lengths available on request
600
870
490
800
A
B
C
1st stage 2nd stage0.75
C
A B
XHC30B 1500 Mainline hose complete with quick connect couplings, length 30.0 metres
62 63
46
ModelnumberBR Lite
Description
BR Pro
BoltRight Multi-language - Including register system (free trial version)
BOLTRIGHT SOFTWARE - THE EASY ANSWER!
Available as download only
Easy to use, minimal computer knowledge required
Multi-Language Interface
Available in 7 different languages
BoltRight Multi-language - Including register system & non standard bolt / flange calculations (full version)
The Hi-Force BoltRight software programme is designed to assist engineers in the Oil & Gas, Petrochemical, Power Generation and a wide variety of other Engineering Industries where accurate and consistent “bolt up” of components is required. The programme allows the user to input key joint data related to flange size and class, for all ANSI/ASME, API and ISO type flanges along with the applicable bolt material, gasket material and type, operating temperature, preferred or specified method of bolt tightening (torque or direct tension), friction reducing lubricant to be applied, or the applicable value of friction coefficient necessary for torque tightening applications. Based on the information entered, the BoltRight programme will analyse all of the data and produce a comprehensive calculation sheet along with the required torque or tension figures to ensure an accurate and correctly bolted joint is achieved.
BoltRight will also create an individual tightening procedure for each bolted joint, which can include specific information such as plant owner name, bolting contractor company name, joint tag reference number and any special remarks all of which can be easily entered into the procedure by the user. These individually produced tightening procedures can also be added to a master joint register, allowing the contractor and/or plant operator to implement a comprehensive on-site Flange Management System. Both the individual tightening procedures and the master joint register can be either printed or stored electronically to ensure full traceability.
47
Up to 1000 Bar working pressure
HTP - MANUALLY OPERATED HYDROTEST PUMPS
Suitable for use with a wide variety of fluids
Two stage with semi automatic pressure changeover
Lightweight aluminium design with stainless steel pistons
Dimensions in mmModelnumber
A B C
Modelnumber
(with tank) (pump only)
Working pressure
Bar Valve type
Weightkg
Changeoverpressure
BarHTP100HTP300
HTP500HTP700
HTP1000
HTP100PUHTP300PU
HTP500PUHTP700PU
HTP1000PU
100300
500700
1000
2-way2-way
2-way2-way
2-way
2020
2020
20
2020
2020
20
703703
703703
703
210210
210210
210
384384
384384
384
A
B
C
HTP-PU - MANUALLY OPERATED HYDROTEST PUMPS
Choice of 5 different models
Supplied complete with fixing kit
Compact, lightweight and easy to operateA
B CD
F
E
HI
J
G
L
K
143.0 88.9 71.4 8.7 34.9 46.0 772.5 73.0 175.0 4 X M8 23.0 88.5
A B C D E F G H I J K LDimensions in mm (all models)
5.9
WeightKg
HRS15 15 litre standard reservoir
HTP100 & HTP300up to 300 3HH3-6NMS-1
HH3-6NMS-3
DescriptionModelnumber
Modelnumber
Pressure rangeBar
HTP100GK
HTP300GK
HTP500GK
HTP700GKHTP1000GK
110310
552
700
1000
HH3-6NMS-2
End FittingBarNumberLength
up to 700
1000
3
3
Model Max W.P(metres) number
For model
HTP500 & HTP700
HTP1000
3/8 NPT Male Swivel”
3/8 NPT Male Swivel”
3/8 NPT Male Swivel”
PRESSURE GAUGES
HOSES
RESERVOIRS
64 65
48
Modelnumber
Weightkg A B C
Dimensions in mm
Max. output pressure (Bar)at airline input pressure
AHP10
AHP26
AHP36AHP58
AHP187
21/ ” NPT
AHP107
AHP275
10 PSI0.69 Bar
50 PSI3.45 Bar
100 PSI6.9 Bar
” -18UNF9 16/
AHP425
6
14
17
28
9762
155345
34
90
122
200
638373
9311448
69
181
250
400
1293738
18972931
Fluid volumedisplacement
3 (cm )
42.3
16.0
12.3
7.6
2.24.0
1.61.0
per stroke
23
21
20
20
2020
2020
Outletport
thread
21/ ” NPT
21/ ” NPT21/ ” NPT21/ ” NPT
” -18UNF9 16/
” -18UNF9 16/
450 395 395
450 395 395
450 395 395
450 395 395
450 395 395450 395 395450 395 395450 395 395
AHP - AIR DRIVEN HYDROTEST PUMPS - STANDARD FLOW
Output pressures up to 2931 Bar
Suitable for use with various fluids
150mm dual scale vibra pressure gauge
Air consumption 28 scfm (0.79 m /minute)3
* Pressure exceeds pump capacity.
Approximate rate of discharge (litres/min) at air input pressure 100 PSI (7 Bar)Hydraulic pressurePSI Bar
0
5001000
2000
3000
5000
750010000150002000025000
30000
40000
1500
2500
4000
0
3569
138
207
345
517690
103413791724
2069
2760
104
173
276
AHP10
23.10
12.00
*
*
*
*
*
*
*****
**
*
AHP26
6.00
4.393.80
3.00
1.95
3.34
2.56
*
*****
**
*
AHP36
8.80
5.854.72
3.00
3.90
1.21
*
*
*****
*
*
*
AHP58
3.56
3.052.51
2.25
1.85
1.02
2.38
2.05
1.56
*****
**
AHP107
1.97
1.501.28
1.21
1.16
0.95
0.760.44
1.25
1.18
1.02
***
**
AHP187
1.15
1.051.00
0.78
0.73
0.67
0.600.520.39
0.90
0.75
0.70
**
**
AHP275
0.72
0.680.65
0.55
0.48
0.42
0.400.370.33
0.300.21
0.60
0.50
0.45
**
AHP425
0.43
0.400.38
0.34
0.31
0.26
0.250.240.21
0.200.16
0.13
0.05
0.36
0.33
0.29
The Hi-Force AHP series of air driven hydrostatic pressure testing pumps offers a choice of eight models with output pressure capacities ranging from 6 Bar (87 PSI) to 2931 Bar (42500 PSI). All models are suitable for use with various fluids, including water and are supplied with a 150mm diameter glycerine filled hydraulic pressure gauge (calibrated on request), inlet airline filter, lubricator and pressure regulator unit, lightweight fluid reservoir, pump start/stop valve and a robust stainless steel skid mounted framework. Optional extras include chart recorder, stainless steel reservoir, stroke counter system and pressure isolation valve. All units are of compact design with a maximum weight of 23 kg.
BA
C
49
Output pressures up to 1634 Bar
AHP2 - AIR DRIVEN HYDROTEST PUMPS - MEDIUM FLOW
Suitable for use with various fluids
150mm dual scale vibra pressure gauge
Air consumption 56 scfm (1.59 m3/ minute)
Modelnumber
Dimensions in mm
Max. output pressure (Bar)at airline input pressure10 PSI
0.69 Bar50 PSI
3.45 Bar100 PSI6.9 Bar
Outletport
thread
”-18UNF916/
12/ ” NPTAHP2-036
AHP2-060
AHP2-097AHP2-144AHP2-237
17.2
31.0
51.775.8
131.0
124.1
199.9
327.5489.5
799.8
248.2
413.7
668.8992.8
1634.1
Fluid volumedisplacement
3 (cm )per stroke
40.8
24.6
15.210.2
6.1
12/ ” NPT
12/ ” NPT
12/ ” NPT
Weightkg
24
24
2424
24
A
450
450
450450
450
B
390
390
390390
390
C
465
465
465465
465
* Pressure exceeds pump capacity.
Approximate rate of discharge (litres/min) at air input pressure 100 PSI (7 Bar)Hydraulic pressure
PSI Bar0
500100015002000300040005000
7500
1000015000
20000
23700
0
3569
104138207276345
517
6901034
1379
1634
AHP2-036
10.20
8.607.256.155.403.05
***
**
**
AHP2-060
6.20
5.504.804.504.203.502.75
2.16
*
****
AHP2-097
3.90
3.553.193.002.872.552.282.10
1.45
*
***
AHP2-144
2.70
2.502.352.162.151.881.751.64
1.35
1.15*
**
AHP2-237
1.57
1.521.471.421.381.291.221.20
1.10
0.980.78
0.51
0.34
The Hi-Force AHP2 series of air driven hydrostatic pressure testing pumps offers a choice of 5 models with output pressure capacities ranging from 17 Bar (246 PSI) to 1634 Bar (23700 PSI). All models are compact design and suitable for use with various fluids including water and are supplied with a 150mm diameter glycerine filled hydraulic pressure gauge (calibrated on request), inlet airline filter, lubricator and pressure regulator unit, lightweight fluid reservoir, pump start/stop valve and a robust stainless steel skid mounted framework. Optional extras include chart recorder, stainless steel reservoir, stroke counter system and pressure isolation valve.
C
BA
66 67
50
Modelnumber
Weightkg A B C
Dimensions in mm
Max. output pressure (Bar)at airline input pressure
21/ ” NPTF
Fluid volumedisplacement
3 (cm )per stroke Outlet
portthread
21/ ” NPTF
21/ ” NPTF
137.9
206.9
344.8
275.8
413.7
689.5
98.3
57.4
34.4
71540
40
40
390 490
715 390 490
15 PSI1.04 Bar
50 PSI3.45 Bar
100 PSI6.9 Bar
AHP3-040
AHP3-060
AHP3-100
41.4
62.1
103.4 715 390 490
* Pressure exceeds pump capacity.
Approximate rate of discharge (litres/min) at air input pressure 100 PSI (7 Bar)Hydraulic pressurePSI0
500
1000
1500
20002500
3000
3500
40004500
5000
5500
6000
65007000
75008000850090009500
10000
Bar0
34.5
68.9
103.4
137.9172.4
206.8
241.3
275.8310.3
344.8
379.2
413.7
448.2482.6
517.1551.6586.1620.5
655.0
689.5
18.3514.42
10.81
7.21
5.904.26
2.62
1.31
0
************
AHP3-040 AHP3-06015.6312.85
10.51
8.57
6.975.66
4.60
3.74
3.022.40
1.84
1.27
0.65
********
AHP3-10011.9610.49
8.69
7.05
5.654.83
4.18
3.85
3.523.03
2.79
2.62
2.46
1.881.39
1.150.900.660.490.33
0.16
AHP3 - AIR DRIVEN HYDROTEST PUMPS - HIGH FLOW
Output pressures up to 690 Bar
Suitable for use with various fluids
150mm dual scale vibra pressure gauge
Air consumption 175 scfm (4.96 m /minute)3
The Hi-Force AHP3 series of air driven hydrostatic pressure testing pumps offers a choice of 3 models with output pressure capacities ranging from 42 Bar (609 PSI) to 690 Bar (10000 PSI). All models are compact design and suitable for use with various fluids including water and are supplied with a 150mm diameter glycerine filled hydraulic pressure gauge (calibrated on request), inlet airline filter, lubricator and pressure regulator unit, pressure isolation valve, pressure release valve, fluid inlet via Y-type fluid strainer, pump start/stop valve and a robust stainless steel skid mounted framework. Optional extras include stainless steel reservoir, stroke counter system, distance piece for chemical duty and chart recorder.
C
BA
51
Modelnumber
Weightkg A B C
Dimensions in mm
Max. output pressure (Bar)at airline input pressure
Fluid volumedisplacement
3 (cm )per stroke
* Pressure exceeds pump capacity.
Approximate rate of discharge (litres/min) at air input pressure 100 PSI (7 Bar)Hydraulic pressure
PSI
ATDP63ATDP125
ATDP216
275
140
79
20 PSI1.38 Bar
60 PSI4.14 Bar
100 PSI6.9 Bar
87
172
298
260
517
894
434
862
1489
96
96
96
765
765
765
570
570
570
700
700
700
Outletport
thread
12/ ” NPT ”-12UNF1
8/1
2/ ” NPT1
ATDP2160
1000
2000300040005000
6000
800010000
120001600020000
Bar
0
69
138207276345
414
552690
828
11031379
ATDP6332.2
25.7
20.516.212.58.0
2.8
*****
ATDP12516.9
14.0
12.310.69.48.3
7.3
4.83.0
0.4
**
9.5
8.8
8.07.46.96.4
6.1
5.54.9
4.33.2
1.6
Output pressures up to 1489 Bar
ATDP - AIR DRIVEN TWIN DOUBLE ACTING HYDROTEST PUMPS
Suitable for use with various fluids
Twin double acting design offering high volume flow
Air consumption 212 scfm (6 m /minute)3
The Hi-Force ATDP series of twin double acting air driven hydrostatic pressure testing pumps offers a choice of 3 models with output pressure capacities ranging from 87 Bar (1260 PSI) to 1489 Bar (21600 PSI). The twin double acting design offers a much higher displacement volume per stroke than the smaller AHP & AHP2 series, making it ideal for prefill as well as pressure testing. All models are supplied with a 150mm diameter glycerine filled vibra-gauge, inlet airline filter, lubricator and regulator unit, pump start/stop valve and fluid strainer. Viton and ethylene propylene seals for handling special fluids or chemicals can be factory fitted prior to delivery if required. Other seal materials are available on request.
A
C
B
HYDROTEST PUMPS APPLICATIONS
68 69
52
Modelnumber
Weightkg A
Dimensions in mmCapacitytonnes
Type ofpuller
3-way jaw
3-way jaw 3-way jaw
Hydraulicstroke mm
82110
PistonExt. mm
82SCP103
SCP303SCP203
10
2030
100150
50 11.6
23.750.0
SCP - SELF-CONTAINED HYDRAULIC PULLERS
Capacities from 10 to 30 tonnes
Sealed hydraulic system
Operates in any position
Supplied complete with carrying/storage case
195
275405
30
50100
250
360410
ACP - AUTO CENTRE HYDRAULIC PULLER KITS
Modelnumber
Weightkg A
Dimensions in mm
Capacities from 10 to 50 tonnes
Capacitytonnes
Type ofpuller
Cylinder Pumpmodel no. model no.
2 & 3 jaw
3 jaw
3 jaw
3 jaw
24.5
44.0
76.5
181.0
ACP10ACP20ACP30ACP50
10
20
30
50
HHS102
HHS202
HHS302
HHS603
HP110
HP110
HP110
HP227
296
320
407
727
50
70
90
120
Quick set-up time, easy to use
High quality, drop forged steel components
Supplied complete with all hydraulic components (pump, cylinder, hose, gauge, etc)
A
B
B (Min)
350
480
580
920
B (Max)
B (Min) B (Max)
A
B
The SCP range of self-contained hydraulic pullers offers a choice of 3 models, each with integral manually operated hydraulic pump and multi-position operating handle. The completely sealed hydraulic system of the SCP pullers enables use of the tool in any position and all models are easy to operate and provide an efficient solution for many pulling applications.
The ACP heavy duty, auto-centering hydraulic puller kit range offers a choice of 4 models, with capacities from 10 to 50 tonnes. All models are supplied complete with a detachable hollow ram cylinder, manually operated pump, hydraulic hose and a 100mm diameter pressure gauge. All models are easy to set up and are the ideal tool for all pulling, pushing, installing and removing applications required for press fitted or heat fitted parts, including wheels, sprockets, flywheels, gears and bearings.
Supplied complete with carrying/storage case
53
Modelnumber
Dimensions in mmCapacitytonnes
Type ofpuller
Cylindermodel no.
4.510
2020
30
30505020
30
50
2 & 3 jaw2 & 3 jaw
2 jaw3 jaw
2 jaw
3 jaw2 jaw3 jaw
2 jaw beam
2 jaw beam
2 jaw beam
Note: PK202, PK302 & PK502 are 2-jaw beam only (not complete kit). Dimensions calculated with 15° outward angled puller legs.
HP110HP110
HP110HP110
HP110
HP110HP227HP227
*
*
*
Pumpmodel no.
PKS5-2-3PKS10-2-3
PKS20-2PKS20-3
PKS30-2PKS30-3PKS50-2PKS50-3
PK202
PK302
PK502
HSS53HHS102
HHS202HHS202
HHS302
HHS302HHS603HHS603
*
*
*
Weightkg2434
2937
49
58105130
3
4
7
Working pressure 700 Bar
PKS - HYDRAULIC 2 & 3 WAY PULLER KITS
Multi-purpose hollow piston cylinder (excl. PKS5-2-3)
Supplied complete with carrying/storage box
Supplied complete with all hydraulic components (pump, cylinder,hose, gauge, etc)
A A
B B
A225296
320320
407
407727727
*
*
*
B240350
480480
580
580920920
*
*
*
Modelnumber
Capacitytonnes
Pumpmodel no.
Cylindermodel no.
Weightkg
Working pressure 700 Bar
PKC - COMPREHENSIVE HYDRAULIC PULLER KITS
Multi-purpose hollow piston cylinder
Supplied complete with carrying/storage box
Extremely versatile and includes 2-way and 3-way grip pullers,bearing pullers, bearing cup pullers and cross head pullers
A B CMin
CMax
D E FMax
GMin
G HMin
FMax
Dimensions in mm
C
DE
F
G
H
A
B
A
B
Dimensions A & B calculated with 15° outward angled puller legs.
1020
30
50
HHS102HHS202
HHS302
HHS603
HP110HP110
HP110
HP227
2560
116
268
296320
407
727
350480
580
920
115135
180
230
260345
440
580
300265
284
447
110152
260
260
1011
15
15
110134
250
250
4040
60
60
145145
240
240
115115
150
150
PKC10PKC20
PKC30PKC50
70 71
56
Modelnumber
HCH40HCH120
Weightkg A B C
Dimensions in mm
615
2.814.5
6276
101250
247600
Cuttingforce
tonnes
Steel Wire RopeDescription
Maximum diameter cutting capacity in mm :HCH40 HCH120
6x7 Hempcore6x12 Hempcore6x19 Hempcore
Soft aluminum barSoft steel barReinforcing bar
Wire Strands Bare copper strandsBare aluminum strands1x7 Guy steel wire strands1x19 Guy steel wire strands
202525
22161332322025
-
Lead sheathed telephone cable 40 125Telephone cable CCP 40 125
Underground cable 40 75
--
-------
HCH - HYDRAULIC CUTTER HEADS
Cutting capacity up to 125mm diameter
Working pressure 700 Bar
Compact and lightweight
For suitable pumps, please see pages 10, 11, 13 & 19
A
B
C
Round Bar Soft copper bar 25 -
Cable
Material
B CDimensions in mmCutting
forcetonnes
Steel Wire Rope
Maximum diameter cutting capacity in mm :
Wire Strands
Description 6x7 Hempcore6x12 Hempcore6x19 Hempcore
Soft aluminum barSoft steel barReinforcing barBare copper strandsBare aluminum strands
1x7 Guy steel wire strands1x19 Guy steel wire strands
Lead sheathed telephone cableTelephone cable CCP
Soft copper bar
CT20
Modelnumber
CT20CT40
Material
Cable
66
Weightkg
2.86.0
Round Bar
A
630390
10376
6540
CT - SELF-CONTAINED HYDRAULIC CUTTERS
Cutting capacity up to 40mm diameter
Cuts a wide variety of materials
Self-contained operation
Suitable for cutting wire rope, round bar and electrical cable A
B
C
Underground cable
ACSR
202020202016132020201516202020
CT40222525252216133232
-2025404040
AB
57
Modelnumber
Weightkg C
Dimensions in mm
HSWC19HSWC28
HSWC44
B
93105
125
154174
203
A
315357
460
mm Øwire rope
Cutting capacity
1928
44
9.515.5
30.0
Cutting capacities up to 44mm diameter
HSWC - SELF CONTAINED HYDRAULIC WIRE ROPE CUTTERS
Strong rigid steel constructionEasy to use with minimum operator effort
Self-contained design enables easy transportation
Dimensions in mmModelnumber mm Ø
HWRC1115
HWRC1125HWRC1136HWRC1145
Cutting capacity in mm
tonnesOutput Wire rope
36
80
80120
38
63
90114
Cable
38
63
90114
BarReinforcing
20
32
3240
capacitylitres
Oil
0.35
0.90
1.202.40
Weightkg
30
60
7095
A
400
450
515570
B
155
200
200280
C
270
390
390445
Working Pressure 700 Bar
HWRC - DOUBLE ACTING WIRE ROPE CUTTERS
Double acting design
Smooth guillotine cutting actionCuts high tensile locked coil wire rope and steel bar
ADimensions in mmModel
number
Working pressure 700 Bar
HCC - CHAIN CUTTERS
Single acting design
Fitted with locking guard
Cutting capacities up to 50mm diameter
capacitymm Ø
Cutting force
tonnes
Cuttingchain
Max. allowed
grade hardnesssteel
HCC26
HCC34
HCC50
HCC26-100
HCC34-100
HCC50-100
26
34
50
26
34
50
70
100
184
70
100
184
80
80
80
100
100
100
44 HRC
44 HRC
44 HRC
47 HRC
47 HRC
47 HRC
capacitycm³
Oil
276
492
1225
276
492
1225
Weightkg
23
40
80
23
40
80
440
410
565
440
410
565
B
180
460
635
180
460
635
C
180
250
360
180
250
360
A
B
C
AB
C
C
72 73
58
Modelnumber
Note: pump supplied separately
Maximumforce
tonnes
HHP30 30
Punch capacity (mm)
10.0 up to 20.5
HP232
HC3 3m hose
AHP1120complete withHC3 3m hose
19.8
Throatdepth
70
mm
HHP50
42.0c/w 2 x HC3 c/w 2 x HC3
Hole punchdiameter
SteelPlate
Modelnumber
Recommended pump & hoseManuallyoperated
Pneumaticallyoperated
HHP30
HHP50
complete with
HP232D AHP1141
50 70 15.0 up to 25.0
Standard punch/diesets included
mm10.5, 13.517.5, 20.5
17.5, 20.5, 25.010.5, 13.5
A B CDimensions in mm
Weightexcl. pump
kg
A BHHP - HOLE PUNCHERS
Punching force up to 50 tonnes
Throat depth 70mm
Working pressure 700 Bar
Integral carrying handle
C
HKP & SKP - KNOCK OUT PUNCHERS
D
D
B
Modelnumber
Maximumforce
tonnesStainless
steelMildsteel
Plate capacity (mm) PumpIncluded
HoseIncluded
HKP10-2
HKP10-4H
SKP7
HKP10-2HHKP10-4
3.2
3.2
3.2
3.2
3.2
HP110
HP110Not includedNot included
Not includedNot included
HC2
HC2
Self contained unit with integral pump
14.6
26.17.0
9.0
18.5
Complete set weight kg
10
10
7
1010
1.6
1.61.6
1.6
1.6
A
HKP10-2
HKP10-4
SKP7
Modelnumber Description Punches/dies included
Std.punch/die AConduit Size
Length B
Length B
Length B
Conduit Size
Conduit Size
Std.punch/die A
Std.punch/die A
21.8
306
21.8
306
21.8
1/2”
1/2”306
1/2”
27.6
240
27.6
240
27.6
240
34”/
/34”
34”/
1”
1”
34.1
240
34.1
240
34.1
240
1”
42.71 4”/1
240
42.71/1 4”
240
42.71 4”1/
240
48.7
”1 /12
240
48.711
2”/
240
48.7
1 ”/12
240
2”
2”
240
240
240
60.5
60.5
60.5
2”
1 ”2 /2
76.1
253
88.93 ”
253
102.8
253
/2 ”31
115.5
”4253
Capacity up to 10 tonnes
Spring return hydraulic cylinder
Working pressure 700 Bar
Supplied complete with standard set of punches/dies
216
281
95
160
372
412
E
E
78
71 15
15
The HHP30 is single actingoperation, the HHP50 is double acting operation
59
Modelnumber
Weightkg C
Dimensions in mmBA
NS - NUT SPLITTERS
Hexagon AF sizesmm
Bolt sizesmm
17 - 3232 - 41
41 - 5050 - 60
60 - 75
6788
108126
162
M10 - M22M22 - M27
M27 - M33M33 - M39
M39 - M48
4.07.4
10.615.8
39.3
210268
315336
426
7796
116138
175
NS104NS110
NS200NS206
NS215
Capacities from 17 to 75mm AF
Working pressure 700 Bar
Compact & easy to use
360° swivel coupler on models NS104 & NS110
A
B
C
Modelnumber
Weightkg C
Dimensions in mmBA
Capacities from 17 to 50mm AF
HMNS - SELF CONTAINED NUT SPLITTERS
Hexagon AF sizesmm
Bolt sizesmm
HMNS104
HMNS110
HMNS200
17 - 32
32 - 41
41 - 50
M10 - M22
M22 - M27
M27 - M33
5.8
7.9
13.6
64
78
94
88
101
112
380
440
471
Choice of 3 modelsCompact & easy to useSelf contained hydraulic system
Modelnumber
Weightkg
Dimensions in mmA
Choice of 2 models
DNS - DOUBLE ACTING NUT SPLITTERS
A
DNS404DNS506
Hexagon AF sizesmm
Stud bolt thread sizes
75 - 105105 - 135
50
96
379.5451
- 278/ ”1 3/4”
- 3/42 ” 3 1/2”
inch metricimperial
M48 - M72
M72 - M952 16
15/ ” - 4 14/ ”
B183
2354 ” - 1/4/5 ”38
Working pressure 700 Bar
Double acting design
Designed to fit on all API and ANSI flanges B
B
C
A
74 75
60
HFS-H - HYDRAULIC FLANGE SPREADERS
Modelnumber
Capacities from 4.5 to 10 tonnes
HFS50H
Capacitytonnes
Strokemm
Oil capacitycm³
thicknessmm
Max. flangeStud size
mmwedge
mm
Standard
HFS100H
4.5
10
75
56
48
81
2 x 57
2 x 92
19 - 29
32 - 41
3 - 29
3 - 29
Weightkg5.0
11.6
Working pressure 700 Bar
Quick and easy to assemble on flange
Capable of opening flanges up to 2 x 57mm or 2 x 92mm thick
HFS & HFS-TK – HYDRAULIC FLANGE SPREADER KITS
Modelnumber
Capacities from 4.5 to 10 tonnes
Capacitytonnes
Strokemm
Oil capacitycm³
thicknessmm
Max. flangeStud size
mmwedge
mm
StandardWeight
kg
Dimensions in mmA B C
Working pressure 700 Bar
Suitable for fitment on to flanges with a maximum stud bolt size of 1 5/8” (41mm)Supplied complete with manually operated pump and hose assembly
Dimensions in mmA B C
4.510
3 - 293 - 29
2 x 4.5
2 x 10
7556
75
56
3 - 29
3 - 29
HFS50HFS100HFS50-TK
HFS100-TK
4881
2 x 48
2 x 81
2 x 572 x 92
2 x 57
2 x 92
19 - 2932 - 41
19 - 29
32 - 41
22.529.1
27.5
35.7
MFS – MECHANICAL FLANGE SPREADERS
Modelnumber
Choice of 6 models
Weightkg
Dimensions in mmA B
Suitable for bolt diameters up to 31mm
Maximum spread 231mm
No external power source required
Pin diametermm inch
5 8/ ”3 4/ ”7
8/ ”1
Min flange bolt holediameter
1619
22
25
28
31
MFS16MFS19MFS22
MFS25
MFS28
MFS31
18/ ”1
14/ ”1
1720
23
26
29
32
Maximum flange thicknessmm inch
38/ ”2 x 1
78/ ”2 x
1316/ ”2 x 1
716/ ”2 x 2
2 x 222 x 35
2 x 47
2 x 62
2 x 70
2 x 95
34/”2 x 2
34/”2 x 3
2.22.7
4.1
6.4
8.2
9.6
A
B
C
210
290
76
108
192
165
290
210
210290
76108
76
108
192165
192
165
A B
C
7095
124
155
181
231
4050
50
50
60
60
Cmin
Cmax
185185
247
247
275
275
232254
318
353
382
385
61
Modelnumber
Weightkg C
Dimensions in mmBA
JS - JAW SPREADER
Working pressure 700 Bar
JS4
Capacitytonnes
0.9
Oil capacitycm³
10.0 2.2 223 9.7 94
B
C
A
Capacity 0.9 tonnes94 mm max. spreadMin jaw height only 9.7mm
Modelnumber
Weightkg
Dimensions in mmBA
SJS - STEPPED JAW SPREADERS
Capacity up to 13 tonnes
Capacitytonnes
Oil capacitycm³
Supplied with safety block & stepped blocks
Maximum spread 60mm
Compact & lightweight design
SJS10 13 5.5
SJS10-M 13 7.5
74
74
Safety block supplied as standard
The JS4 hydraulic spreader is the ideal solution for spreading, wedging and prising operations in a wide variety of industrial applications. The compact, low weight, spring assisted return design enables the tool to fit into a gap of 9.7mm and offers a maximum spread of 94mm. Manufactured from high strength steel, with a maximum pressure of 700 Bar, the JS4 is supplied fitted with a quick connect female half coupler, and can be used with HP110 manual hand pump and HC hose.
A
B
CD E
F
Retracted
G
HI
J
Extended
Extended
B
H
I
JG
Extended
Retracted
CD
EF
A
SJS10-M
SJS10
The Hi-Force SJS10 hydraulic spreader offers the ideal solution for spreading, wedging and prising operations in a wide variety of industrial applications. The compact, low weight, spring assisted, piston retract design of the SJS10 offers the user a powerful 13 tonnes of spreading capacity. Manufactured from high strength steel, the low height jaw tips can easily fit within an 8mm gap and can provide a total spreading distance of 60mm in 5 operations, using the step blocks provided with the tool. Suitable for operation up to 700 Bar maximum working pressure, and supplied complete with a female half quick connect coupler for easy attachment to a Hi-Force manually operated or powered hydraulic pump (see pages 10 - 21).
The SJS10-M has all the features of the SJS10, but with the added benefit of an in built manually operated hand pump.
C D E F G H I J279 40 1060 15 8 328 60 28 49
433 60 40 15 8 10 483 60 28 49
76 77
62
PB – HYDRAULIC PIPE BENDER
Working pressure 700 Bar
For suitable hydraulic pumps, please see pages 10 to 21
Bends up to 90 degrees
Bends standardised conduit and gas pipe
B
A
HGFEDC
*Weight for PB10A, PB10B, & PB10C includes metal storage box
Modelnumber
Weightkg Applicable range / included bending shoes
Maxcapacitytonnes
Strokemm
Oil
litrescapacity
PB10
PB10A
PB10B
PB10C
10
10
10
10
250
250
250
250
0.4
0.4
0.4
0.4
47.0
61.0
61.0
60.0
PB10 does not include bending shoes
Thin steel conduit from 15mm (5/8”) to 75mm (3”)
Thick steel conduit from 16mm (1/2”) to 82mm (3”)
Standard gas pipe from 15mm (1/2”) to 65mm (2.1/2”)
Dimensions in mmA CB E HF GD
720 295495595755147 395695
BENDING SHOES
BS-A15
BS-A25
BS-A39
BS-A63
27.2
42.7
34.0
21.7
48.6
60.576.3
21.6
35.7
27.6
16.1
41.6
52.9
67.9
80
130
100
60
160
220320
1”
2”
12/”1
14/”1
34”
12/”
Modelnumber
BS-A19
BS-A31
BS-A51
BS-A75
For th in conduit
1”
2”
3”2
1/”2
12/”1
14/”1
34/”
58/” 15.9
19.125.431.8
38.1
50.8
63.576.2
13.5
15.9
22.2
28.6
34.9
47.6
59.5
72.2
Pipeouter
dia(mm)
Pipeinnerdia
(mm)
Pipesize
(inch)
Ben-ding
radius(mm)
80
100
137
200
220
365
420
530
BS-B16BS-B22BS-B28
BS-B36
BS-B42
BS-B54
BS-B70BS-B82
Modelnumber
Modelnumber
1”
2”
3”
12/”2
21/”1
14/”1
43/”
21/”
Pipesize
(inch)
Pipeouter
dia(mm)
21.0
26.5
33.3
41.9
47.8
59.6
75.2
87.9
Pipeinnerdia
(mm)
16.4
21.9
28.3
36.9
42.8
54.0
69.6
82.3
Ben-ding
radius(mm)
75
90130
195
230
270
450
500
For th ick conduit For standard gas p ipe
BS-SGP15
BS-SGP20
BS-SGP25
BS-SGP32
BS-SGP40
BS-SGP50
BS-SGP65 12/”2
/
Pipeouter
dia(mm)
Pipeinnerdia
(mm)
Pipesize
(inch)
Ben-ding
radius(mm)
A range of bending shoes, compatible for use with the PB10 pipe bender, are available as an optional extra to ensure a smooth, wrinkle free bend.
Note: PB10A includes all BS-A bending shoes (8 pcs) PB10B includes all BS-B bending shoes (8 pcs) PB10C includes all BS-SGP bending shoes (7 pcs)
The Hi-Force PB10 hydraulic pipe bender is designed to bend various sizes and thicknesses of JIS standardised conduit pipe and gas pipe ranging from 15mm-82mm (1/2” to 3”). Made of aluminium, the bending frame and pivot shoes are lightweight so that it can be easily carried on and off site, and can be operated by any manual or powered pump up to 700 Bar. Available as single pipe bender unit (PB10) or as convenient set including all available bending shoes, suitable for either thin steel conduit (PB10A), thick steel conduit (PB10B) or standard gas pipe (PB10C). For a range of suitable Hi-Force pumps see pages 10 - 21 of this catalogue.
PB10
PB10C
64
RSM – NYLON MULTI-ROLLER STEERABLE SKATES
Capacities from 6 to 30 tonnes
Modelnumber
Capacity perskate settonnes
Weightincl. box
kg
330
330
413
413413
210
310
614
673990
109
109
110
110110
1150
1150
1500
15001500
1500
1500
1500
15001500
210
310
130
242354
110
160
-
--
240
240
180
180188
110
160
190
190190
No. of wheelsfront
steerable
No. of wheelstwin rear
skate
RSM6
RSM9
RSM12
RSM20RSM30
6
9
12
2030
4 no. 82mm x 48mm
8 no. 82mm x 48mm
8 no. 82mm x 48mm
16 no. 82mm x 48mm
24 no. 82mm x 48mm
8 no. 82mm x 48mm
16 no. 82mm x 48mm
8 no. 82mm x 48mm
16 no. 82mm x 48mm
24 no. 82mm x 48mm
51
64
95
118135
Dimensions in mm A B C IHGFED
max
Steerable front skate for total control
Low weight, compact size
Easily assembled, no tools required
Modelnumber
Drawing based on models RSM6 - RSM9
A
DC
G
F
E
H
B
I
RSC & RSS – MULTIPURPOSE SKATES
Capacities from 5 to 37.5 tonnes
Available as kit (RSC20 & RSC50) or as individual skates
Endless hardened roller chain
Ideal for use in confined spaces
RSC20RSC50
Cap. per settonnes
20
50
Complete kits :
Weightkg
SkatesQty: 4
RSS20RSS50
TurntablesQty: 2
RT20RT50
StabilisersQty: 2
RS20RS50
Spacer barsQty: 4
RB20RB50
HandlesQty: 2RH20RH50
41
94
Wooden boxQty: 1
WB1WB2
Individual skate selection chart :
RSS150
ModelnumberRSS20
tonnes5.0
12.5
Weightkg4
11
RSS100 27
42
25.0
37.5
RSS50
Cap. perskate Length Width
Dimensions in mm
Heightless t/table
Height incl. t/table
Rollerwidth
Rollerdia
210
271
370
502
102
125
175
186
59
95
130
152
94
143
179
206
51
87
90
90
18
30
42
42
Note : Turntables for RSS100 (RT100) and RSS150 (RT150) are available on request.
RSC20
Modelnumber
Capacitytonnes
Rollersin contact
Rollerstotal
Weightkg
Dimensions in mmA B C D E F G H I J K
RSH15RSH20
RSH40
RSH50
RSH65
RSH100
1520
40
50
65
100
54
4
6
4
6
1513
13
17
13
17
912
19
29
51
92
210220
270
320
380
530
100113
130
140
168
182
175190
210
220
270
300
1824
30
30
42
50
5160
68
68
76
86
610
10
10
19
19
1314
14
18
19
19
7687
104
115
145
165
1414
18
18
22
22
140155
175
180
220
240
150150
190
240
280
410
RSH - HEAVY DUTY SKATES
Capacities from 15 to 100 tonnes
Heavy duty, flat bed skates
Endless hardened roller chain
78 79
IMPACT SOCKETS IMPACT SOCKETS
80 81
60320006 1/2D 6MM SKT 60322006 1/2D 6MM SKT, LONG
60320007 1/2D 7MM SKT 60322007 1/2D 7MM SKT, LONG
60320008 1/2D 8MM SKT 60322008 1/2D 8MM SKT, LONG
60320009 1/2D 9MM SKT 60322009 1/2D 9MM SKT, LONG
60320010 1/2D 10MM SKT 60322010 1/2D 10MM SKT, LONG
60320011 1/2D 11MM SKT 60322011 1/2D 11MM SKT, LONG
60320012 1/2D 12MM SKT 60322012 1/2D 12MM SKT, LONG
60320013 1/2D 13MM SKT 60322013 1/2D 13MM SKT, LONG
60320014 1/2D 14MM SKT 60322014 1/2D 14MM SKT, LONG
60320015 1/2D 15MM SKT 60322015 1/2D 15MM SKT, LONG
60320016 1/2D 16MM SKT 60322016 1/2D 16MM SKT, LONG
60320017 1/2D 17MM SKT 60322017 1/2D 17MM SKT, LONG
60320018 1/2D 18MM SKT 60322018 1/2D 18MM SKT, LONG
60320019 1/2D 19MM SKT 60322019 1/2D 19MM SKT, LONG
60320020 1/2D 20MM SKT 60322020 1/2D 20MM SKT, LONG
60320021 1/2D 21MM SKT 60322021 1/2D 21MM SKT, LONG
60320022 1/2D 22MM SKT 60322022 1/2D 22MM SKT, LONG
60320023 1/2D 23MM SKT 60322023 1/2D 23MM SKT, LONG
60320024 1/2D 24MM SKT 60322024 1/2D 24MM SKT, LONG
60320025 1/2D 25MM SKT 60322025 1/2D 25MM SKT, LONG
60320026 1/2D 26MM SKT 60322026 1/2D 26MM SKT, LONG
60320027 1/2D 27MM SKT 60322027 1/2D 27MM SKT, LONG
60320028 1/2D 28MM SKT 60322028 1/2D 28MM SKT, LONG
60320029 1/2D 29MM SKT 60322029 1/2D 29MM SKT, LONG
60320030 1/2D 30MM SKT 60322030 1/2D 30MM SKT, LONG
60320031 1/2D 31MM SKT 60322031 1/2D 31MM SKT, LONG
60320032 1/2D 32MM SKT 60322032 1/2D 32MM SKT, LONG
60320033 1/2D 33MM SKT 60322033 1/2D 33MM SKT, LONG
60320034 1/2D 34MM SKT 60322034 1/2D 34MM SKT, LONG
60320035 1/2D 35MM SKT 60322035 1/2D 35MM SKT, LONG
60320036 1/2D 36MM SKT 60322036 1/2D 36MM SKT, LONG
60320038 1/2D 38MM SKT 60322038 1/2D 38MM SKT, LONG
1/2" Sq Dr "METRIC PRODUCT DESCRIPTION
PRODUCT DESCRIPTION
1/2" Sq Dr "METRIC DEEP
60220010 1/2D 5/16 SKT 60222012 1/2D 3/8 SKT, LONG
60220012 1/2D 3/8 SKT 60222014 1/2D 7/16 SKT, LONG
60220014 1/2D 7/16 SKT 60222016 1/2D 1/2 SKT, LONG
60220016 1/2D 1/2 SKT 60222018 1/2D 9/16 SKT, LONG
60220018 1/2D 9/16 SKT 60222020 1/2D 5/8 SKT, LONG
60220020 1/2D 5/8 SKT 60222022 1/2D 11/16 SKT, LONG
60220022 1/2D 11/16 SKT 60222024 1/2D 3/4 SKT, LONG
60220024 1/2D 3/4 SKT 60222026 1/2D 13/16 SKT, LONG
60220026 1/2D 13/16 SKT 60222028 1/2D 7/8 SKT, LONG
60220028 1/2D 7/8 SKT 60222030 1/2D 15/16 SKT, LONG
60220030 1/2D 15/16 SKT 60222100 1/2D 1 SKT, LONG
60220100 1/2D 1 SKT 60222102 1/2D 1-1/16 SKT, LONG
60220102 1/2D 1-1/16 SKT 60222104 1/2D 1-1/8 SKT, LONG
60220104 1/2D 1-1/8 SKT 60222106 1/2D 1-3/16 SKT, LONG
60220106 1/2D 1-3/16 SKT 60222108 1/2D 1-1/4 SKT, LONG
60220108 1/2D 1-1/4 SKT 60222110 1/2D 1-5/16 SKT, LONG
60220110 1/2D 1-5/16 SKT 60222112 1/2D 1-3/8 SKT, LONG
60220112 1/2D 1-3/8 SKT 60222114 1/2D 1-7/16 SKT, LONG
60220114 1/2D 1-7/16 SKT 60222116 1/2D 1-1/2 SKT, LONG
60220116 1/2D 1-1/2 SKT
PRODUCT DESCRIPTION
1/2" Sq Dr "SAE"DEEP
PRODUCT DESCRIPTION1/2" Sq Dr "SAE"
IMPACT SOCKETS
60040016 3/4D 1/2 SKT 60042016 3/4D 1/2 SKT, LONG
60040018 3/4 9/16 SKT 60042018 3/4D 9/16 SKT, LONG
60040020 3/4D 5/8 SKT 60042020 3/4D 5/8 SKT, LONG
60040022 3/4D 11/16 SKT 60042022 3/4D 11/16 SKT, LONG
60040024 3/4D 3/4 SKT 60042024 3/4D 3/4 SKT, LONG
60040026 3/4D 13/16 SKT 60042026 3/4D 13/16 SKT, LONG
60040028 3/4D 7/8 SKT 60042028 3/4D 7/8 SKT, LONG
60040030 3/4D 15/16 SKT 60042030 3/4D 15/16 SKT, LONG
60040100 3/4D 1 SKT 60042100 3/4D 1 SKT, LONG
60040102 3/4D 1-1/16 SKT 60042102 3/4D 1-1/16 SKT, LONG
60040104 3/4D 1-1/8 SKT 60042104 3/4D 1-1/8 SKT, LONG
60040106 3/4D 1-3/16 SKT 60042106 3/4D 1-3/16 SKT, LONG
60040108 3/4D 1-1/4 SKT 60042108 3/4D 1-1/4 SKT, LONG
60040110 3/4D 1-5/16 SKT 60042110 3/4D 1-5/16 SKT, LONG
60040112 3/4D 1-3/8 SKT 60042112 3/4D 1 3/8 SKT, LONG
60040114 3/4D 1-7/16 SKT 60042114 3/4D 1-7/16 SKT, LONG
60040116 3/4D 1-1/2 SKT 60043116 3/4D 1-1/2 SKT, LONG
60040118 3/4D 1-9/16 SKT 60043118 3/4D 1-9/16 SKT, LONG
60040120 3/4D 1-5/8 SKT 60043120 3/4 1-5/8 SKT, LONG
60040122 3/4D 1-11/16 SKT 60043122 3/4D 1-11/16 SKT, LONG
60040124 3/4D 1-3/4 SKT 60043124 3/4D 1-3/4 SKT, LONG
60040126 3/4D 1-13/16 SKT 60043126 3/4D 1-13/16 SKT, LONG
60040128 3/4D 1-7/8 SKT 60043128 3/4D 1-7/8 SKT, LONG
60040130 3/4D 1-15/16 SKT 60043130 3/4D 1-15/16 SKT, LONG
60040200 3/4D 2 SKT 60043200 3/4D 2 SKT, LONG
60040202 3/4D 2-1/16 SKT 60042202 3/4D 2-1/16 SKT, LONG
60040204 3/4D 2-1/8 SKT 60042204 3/4D 2-1/8 SKT, LONG
60040206 3/4D 2-3/16 SKT 60042206 3/4D 2-3/16 SKT, LONG
60040208 3/4D 2-1/4 SKT 60042208 3/4D 2-1/4 SKT, LONG
60040210 3/4D 2-5/16 SKT 60042210 3/4D 2-5/16 SKT, LONG
60040212 3/4D 2-3/8 SKT 60042212 3/4D 2-3/8 SKT, LONG
60040214 3/4D 2-7/16 SKT 60042214 3/4D 2-7/16 SKT, LONG
60040216 3/4D 2-1/2 SKT 60042216 3/4D 2-1/2 SKT, LONG
60040218 3/4D 2-9/16 SKT 60042218 3/4D 2-9/16 SKT, LONG
60040220 3/4D 2-5/8 SKT 60042220 3/4D 2-5/8 SKT, LONG
60040222 3/4D 2-11/16 SKT 60042222 3/4D 2-11/16 SKT, LONG
60040224 3/4D 2-3/4 SKT 60042224 3/4D 2-3/4 SKT, LONG
60040226 3/4D 2-13/16 SKT 60042226 3/4D 2-13/16 SKT, LONG
60040228 3/4D 2-7/8 SKT 60042228 3/4D 2-7/8 SKT, LONG
60040230 3/4D 2-15/16 SKT 60042230 3/4D 2-15/16 SKT, LONG
60040300 3/4D 3 SKT 60042300 3/4D 3 SKT, LONG
3/4" Sq Dr "SAE"DEEP
PRODUCT DESCRIPTION
PRODUCT DESCRIPTION3/4" Sq Dr "SAE" 1" Sq Dr "METRIC PRODUCT
DESCRIPTION 1" Sq Dr "METRIC PRODUCT DESCRIPTION
60150017 1D 17MM SKT 60150060 1D 60MM SKT
60150018 1D 18MM SKT 60150063 1D 63MM SKT
60150019 1D 19MM SKT 60150065 1D 65MM SKT
60150020 1D 20MM SKT 60150067 1D 67MM SKT
60150021 1D 21MM SKT 60150070 1D 70MM SKT
60150022 1D 22MM SKT 60150071 1D 71MM SKT
60150023 1D 23MM SKT 60550075 1D 75MM SKT
60150024 1D 24MM SKT 60550076 1D 76MM SKT
60150025 1D 25MM SKT 60550077 1D 77MM SKT
60150026 1D 26MM SKT 60550078 1D 78MM SKT
60150027 1D 27MM SKT 60550080 1D 80MM SKT
60150028 1D 28MM SKT 60550085 1D 85MM SKT
60150029 1D 29MM SKT 60550090 1D 90MM SKT
60150030 1D 30MM SKT 60550095 1D 95MM SKT
60150031 1D 31MM SKT 60550100 1D 100MM SKT
60150032 1D 32MM SKT 60550105 1D 105MM SKT
60150033 1D 33MM SKT 60550110 1D 110MM SKT
60150034 1D 34MM SKT 60550115 1D 115MM SKT
60150035 1D 35MM SKT
60150036 1D 36MM SKT
60150037 1D 37MM SKT
60150038 1D 38MM SKT
60150039 1D 39MM SKT
60150040 1D 40MM SKT
60150041 1D 41MM SKT
60150042 1D 42MM SKT
60150043 1D 43MM SKT
60150044 1D 44MM SKT
60150045 1D 45MM SKT
60150046 1D 46MM SKT
60150047 1D 47MM SKT
60150048 1D 48MM SKT
60150050 1D 50MM SKT
60150051 1D 51MM SKT
60150052 1D 52MM SKT
60150053 1D 53MM SKT
60150054 1D 54MM SKT
60150055 1D 55MM SKT
60150056 1D 56MM SKT
60150057 1D 57MM SKT
60150058 1D 58MM SKT
IMPACT SOCKETS
84 85
IMPACT SOCKETS
1" Sq Dr "METRIC DEEP
PRODUCT DESCRIPTION
1" Sq Dr "METRIC DEEP
PRODUCT DESCRIPTION
60152017 1D 17MM SKT, LONG 60152060 1D 60MM SKT, LONG
60152018 1D 18MM SKT, LONG 60152062 1D 62MM SKT, LONG
60152019 1D 19MM SKT, LONG 60152063 1D 63MM SKT, LONG
60152020 1D 20MM SKT, LONG 60152065 1D 65MM SKT, LONG
60152021 1D 21MM SKT, LONG 60152067 1D 67MM SKT, LONG
60152022 1D 22MM SKT, LONG 60152070 1D 70MM SKT, LONG
60152023 1D 23MM SKT, LONG 60552075 1D 75MM SKT, LONG
60152024 1D 24MM SKT, LONG 60552076 1D 76MM SKT, LONG
60152025 1D 25MM SKT, LONG 60552077 1D 77MM SKT, LONG
60152026 1D 26MM SKT, LONG 60552078 1D 78MM SKT, LONG
60152027 1D 27MM SKT, LONG 60552080 1D 80MM SKT, LONG
60152028 1D 28MM SKT, LONG 60552085 1D 85MM SKT, LONG
60152029 1D 29MM SKT, LONG 60552090 1D 90MM SKT, LONG
60152030 1D 30MM SKT, LONG 60552095 1D 95MM SKT, LONG
60152031 1D 31MM SKT, LONG 60552100 1D 100MM SKT, LONG
60152032 1D 32MM SKT, LONG 60552105 1D 105MM SKT, LONG
60152033 1D 33MM SKT, LONG 60552110 1D 110MM SKT, LONG
60152034 1D 34MM SKT, LONG 60552112 1D 112MM SKT, LONG
60152035 1D 35MM SKT, LONG 60552114 1D 114MM SKT, LONG
60152036 1D 36MM SKT, LONG 60552115 1D 115MM SKT, LONG
60152037 1D 37MM SKT, LONG 60552116 1D 116MM SKT, LONG
60152038 1D 38MM SKT, LONG 60552118 1D 118MM SKT, LONG
60152039 1D 39MM SKT, LONG 60552120 1D 120MM SKT, LONG
60152040 1D 40MM SKT, LONG
60152041 1D 41MM SKT, LONG
60152042 1D 42MM SKT, LONG
60152043 1D 43MM SKT, LONG
60152044 1D 44MM SKT, LONG
60152045 1D 45MM SKT, LONG
60152046 1D 46MM SKT, LONG
60152047 1D 47MM SKT, LONG
60152048 1D 48MM SKT, LONG
60152050 1D 50MM SKT, LONG
60152051 1D 51MM SKT, LONG
60152052 1D 52MM SKT, LONG
60152053 1D 53MM SKT, LONG
60152054 1D 54MM SKT, LONG
60152055 1D 55MM SKT, LONG
60152056 1D 56MM SKT, LONG
60152057 1D 57MM SKT, LONG
60152058 1D 58MM SKT, LONG
1" Sq Dr "SAE" PRODUCT DESCRIPTION 1" Sq Dr "SAE" PRODUCT
DESCRIPTION60050020 1D 5/8 SKT 60050312 1D 3-3/8 SKT
60050022 1D 11/16 SKT 60050316 1D 3-1/2 SKT
60050024 1D 3/4 SKT 60050320 1D 3-5/8 SKT
60050026 1D 13/16 SKT 60050324 1D 3-3/4 SKT
60050028 1D 7/8 SKT 60050328 1D 3-7/8 SKT
60050030 1D 15/16 SKT 60050400 1D 4 SKT
60050100 1D 1 SKT 60050404 1D 4-1/8 SKT
60050102 1D 1-1/16 SKT 60050408 1D 4-1/4 SKT
60050104 1D 1-1/8 SKT 60050416 1D 4-1/2 SKT
60050106 1D 1-3/16 SKT
60050108 1D 1-1/4 SKT
60050110 1D 1-5/16 SKT
60050112 1D 1-3/8 SKT
60050114 1D 1-7/16 SKT
60050116 1D 1-1/2 SKT
60050118 1D 1-9/16 SKT
60050120 1D 1-5/8 SKT
60050122 1D 1-11/16 SKT
60050124 1D 1-3/4 SKT
60050126 1D 1-13/16 SKT
60050128 1D 1-7/8 SKT
60050130 1D 1-15/16 SKT
60050200 1D 2 SKT
60050202 1D 2-1/16 SKT
60050204 1D 2-1/8 SKT
60050206 1D 2-3/16 SKT
60050208 1D 2-1/4 SKT
60050210 1D 2-5/16 SKT
60050212 1D 2-3/8 SKT
60050214 1D 2-7/16 SKT
60050216 1D 2-1/2 SKT
60050218 1D 2-9/16 SKT
60050220 1D 2-5/8 SKT
60050222 1D 2-11/16 SKT
60050224 1D 2-3/4 SKT
60050226 1D 2-13/16 SKT
60050228 1D 2-7/8 SKT
60050230 1D 2-15/16 SKT
60050300 1D 3 SKT
60050304 1D 3-1/8 SKT
60050308 1D 3-1/4 SKT
IMPACT SOCKETS
86 87
IMPACT SOCKETS
1" Sq Dr "SAE" DEEP
PRODUCT DESCRIPTION
1" Sq Dr "SAE" DEEP
PRODUCT DESCRIPTION
60052020 1D 15/8 SKT, LONG 60052312 1D 3-3/8 SKT, LONG
60052022 1D 11/16 SKT, LONG 60052316 1D 3-1/2 SKT, LONG
60052024 1D 3/4 SKT, LONG 60052320 1D 3-5/8 SKT, LONG
60052026 1D 13/16 SKT, LONG 60052324 1D 3-3/4 SKT, LONG
60052028 1D 7/8 SKT, LONG 60052328 1D 3-7/8 SKT, LONG
60052030 1D 15/16 SKT, LONG 60052400 1D 4 SKT, LONG
60052100 1D 1 SKT, LONG 60052404 1D 4-1/8 SKT, LONG
60052102 1D 1-1/16 SKT, LONG 60052408 1D 4-1/4 SKT, LONG
60052104 1D 1-1/8 SKT, LONG 60052416 1D 4-1/2 SKT, LONG
60052106 1D 1-3/16 SKT, LONG
60052108 1D 1-1/4 SKT, LONG
60052110 1D 1-5/16 SKT, LONG
60052112 1D 1-3/8 SKT, LONG
60052114 1D 1-7/16 SKT, LONG
60052116 1D 1-1/2 SKT, LONG
60052118 1D 1-9/16 SKT, LONG
60052120 1D 1-5/8 SKT, LONG
60052122 1D 1-11/16 SKT, LONG
60052124 1D 1-3/4 SKT, LONG
60052126 1D 1-13/16 SKT, LONG
60052128 1D 1-7/8 SKT, LONG
60052130 1D 1-15/16 SKT, LONG
60052200 1D 2 SKT, LONG
60052202 1D 2-1/16 SKT, LONG
60052204 1D 2-1/8 SKT, LONG
60052206 1D 2-3/16 SKT, LONG
60052208 1D 2-1/4 SKT, LONG
60052210 1D 2-5/16 SKT, LONG
60052212 1D 2-3/8 SKT, LONG
60052214 1D 2-7/16 SKT, LONG
60052216 1D 2-1/2 SKT, LONG
60052218 1D 2-9/16 SKT, LONG
60052220 1D 2-5/8 SKT, LONG
60052222 1D 2-11/16 SKT, LONG
60052224 1D 2-3/4 SKT, LONG
60052226 1D 2-13/16 SKT, LONG
60052228 1D 2-7/8 SKT, LONG
60052230 1D 2-15/16 SKT, LONG
60052300 1D 3 SKT, LONG
60052304 1D 3-1/8 SKT, LONG
60052308 1D 3-1/4 SKT, LONG
1-1/2" Sq Dr "METRIC PRODUCT DESCRIPTION 1-1/2" Sq Dr "METRIC PRODUCT
DESCRIPTION60560030 1-1/2D 30MM SKT 60560105 1-1/2D 105MM SKT
60560032 1-1/2D 32MM SKT 60560110 1-1/2D 110MM SKT
60560033 1-1/2D 33MM SKT 60560115 1-1/2D 115MM SKT
60560034 1-1/2D 34MM SKT 60560120 1-1/2D 120MM SKT
60560035 1-1/2D 35MM SKT 60560125 1-1/2D 125MM SKT
60560036 1-1/2D 36MM SKT 60560130 1-1/2D 130MM SKT
60560037 1-1/2D 37MM SKT 60560135 1-1/2D 135MM SKT
60560038 1-1/2D 38MM SKT 60560140 1-1/2D 140MM SKT
60560040 1-1/2D 40MM SKT 60560145 1-1/2D 145MM SKT
60560041 1-1/2D 41MM SKT 60560150 1-1/2D 150MM SKT
60560042 1-1/2D 42MM SKT 60560155 1-1/2D 155MM SKT
60560043 1-1/2D 43MM SKT 60560160 1-1/2D 160MM SKT
60560045 1-1/2D 45MM SKT 60560165 1-1/2D 165MM SKT
60560046 1-1/2D 46MM SKT 60560170 1-1/2D 170MM SKT
60560047 1-1/2D 47MM SKT 60560175 1-1/2D 175MM SKT
60560048 1-1/2D 48MM SKT 60560185 1-1/2D 185MM SKT
60560050 1-1/2D 50MM SKT
60560052 1-1/2D 52MM SKT
60560054 1-1/2D 54MM SKT
60560055 1-1/2D 55MM SKT
60560056 1-1/2D 56MM SKT
60560058 1-1/2D 58MM SKT
60560060 1-1/2D 60MM SKT
60560061 1-1/2D 61MM SKT
60560062 1-1/2D 62MM SKT
60560063 1-1/2D 63MM SKT
60560065 1-1/2D 65MM SKT
60560068 1-1/2D 68MM SKT
60560070 1-1/2D 70MM SKT
60560072 1-1/2D 72MM SKT
60560073 1-1/2D 73MM SKT
60560075 1-1/2D 75MM SKT
60560076 1-1/2D 76MM SKT
60560077 1-1/2D 77MM SKT
60560078 1-1/2D 78MM SKT
60560080 1-1/2D 80MM SKT
60560085 1-1/2D 85MM SKT
60560088 1-1/2D 88MM SKT
60560090 1-1/2D 90MM SKT
60560095 1-1/2D 95MM SKT
60560100 1-1/2D 100MM SKT
IMPACT SOCKETS
88 89
1-1/2" Sq Dr "METRIC DEEP
PRODUCT DESCRIPTION
60562035 1-1/2D 35MM SKT, LONG
60562036 1-1/2D 36MM SKT, LONG
60562037 1-1/2D 37MM SKT, LONG
60562038 1-1/2D 38MM SKT, LONG
60562040 1-1/2D 40MM SKT, LONG
60562041 1-1/2D 41MM SKT, LONG
60562042 1-1/2D 42MM SKT, LONG
60562043 1-1/2D 43MM SKT, LONG
60562045 1-1/2D 45MM SKT, LONG
60562046 1-1/2D 46MM SKT, LONG
60562047 1-1/2D 47MM SKT, LONG
60562048 1-1/2D 48MM SKT, LONG
60562050 1-1/2D 50MM SKT, LONG
60562052 1-1/2D 52MM SKT, LONG
60562054 1-1/2D 54MM SKT, LONG
60562055 1-1/2D 55MM SKT, LONG
60562056 1-1/2D 56MM SKT, LONG
60562057 1-1/2D 57MM SKT, LONG
60562058 1-1/2D 58MM SKT, LONG
60562060 1-1/2D 60MM SKT, LONG
60562062 1-1/2D 62MM SKT, LONG
60562063 1-1/2D 63MM SKT, LONG
60562065 1-1/2D 65MM SKT, LONG
60562068 1-1/2D 68MM SKT, LONG
60562070 1-1/2D 70MM SKT, LONG
60562072 1-1/2D 72MM SKT, LONG
60562073 1-1/2D 73MM SKT, LONG
60562075 1-1/2D 75MM SKT, LONG
60562076 1-1/2D 76MM SKT, LONG
60562077 1-1/2D 77MM SKT, LONG
60562078 1-1/2D 78MM SKT, LONG
60562080 1-1/2D 80MM SKT, LONG
60562085 1-1/2D 85MM SKT, LONG
60562090 1-1/2D 90MM SKT, LONG
60562095 1-1/2D 95MM SKT, LONG
60562100 1-1/2D 100MM SKT, LONG
60562105 1-1/2D 105MM SKT, LONG
60562110 1-1/2D 110MM SKT, LONG
60562115 1-1/2D 115MM SKT, LONG
60562120 1-1/2D 120MM SKT, LONG
60562125 1-1/2D 125MM SKT, LONG
IMPACT SOCKETS
1-1/2" Sq Dr "SAE" PRODUCT DESCRIPTION 1-1/2" Sq Dr "SAE" PRODUCT
DESCRIPTION60460106 1-1/2D 1-3/16 SKT 60460324 1-1/2D 3-3/4 SKT
60460108 1-1/2D 1-1/4 SKT 60460326 1-1/2D 3-13/16 SKT
60460110 1-1/2D 1-5/16 SKT 60460328 1-1/2D 3-7/8 SKT
60460112 1-1/2D 1-3/8 SKT 60460330 1-1/2D 3-15/16 SKT
60460114 1-1/2D 1-7/16 SKT 60460400 1-1/2D 4 SKT
60460116 1-1/2D 1-1/2 SKT 60460402 1-1/2D 4-1/16 SKT
60460118 1-1/2D 1-9/16 SKT 60460404 1-1/2D 4-1/8 SKT
60460120 1-1/2D 1-5/8 SKT 60460406 1-1/2D 4-3/16 SKT
60460122 1-1/2D 1-11/16 SKT 60460408 1-1/2D 4-1/4 SKT
60460124 1-1/2D 1-3/4 SKT 60460410 1-1/2D 4-5/16 SKT
60460126 1-1/2D 1-13/16 SKT 60460412 1-1/2D 4-3/8 SKT
60460128 1-1/2D 1-7/8 SKT 60460414 1-1/2D 4-7/16 SKT
60460130 1-1/2D 1-15/16 SKT 60460416 1-1/2D 4-1/2 SKT
60460200 1-1/2D 2 SKT 60460420 1-1/2D 4-5/8 SKT
60460202 1-1/2D 2-1/16 SKT 60460424 1-1/2D 4-3/4 SKT
60460204 1-1/2D 2-1/8 SKT 60460428 1-1/2D 4-7/8 SKT
60460206 1-1/2D 2-3/16 SKT 60460500 1-1/2D 5 SKT
60460208 1-1/2D 2-1/4 SKT 60460504 1-1/2D 5-1/8 SKT
60460210 1-1/2D 2-5/16 SKT 60460508 1-1/2D 5-1/4 SKT
60460212 1-1/2D 2-3/8 SKT 60460512 1-1/2D 5-3/8 SKT
60460214 1-1/2D 2-7/16 SKT 60460516 1-1/2D 5-1/2 SKT
60460216 1-1/2D 2-1/2 SKT 60460600 1-1/2D 6 SKT
60460218 1-1/2D 2-9/16 SKT 60460616 1-1/2D 6-1/2 SKT
60460220 1-1/2D 2-5/8 SKT
60460222 1-1/2D 2-11/16 SKT
60460224 1-1/2D 2-3/4 SKT
60460226 1-1/2D 2-13/16 SKT
60460228 1-1/2D 2-7/8 SKT
60460230 1-1/2D 2-15/16 SKT
60460300 1-1/2D 3 SKT
60460302 1-1/2D 3-1/16 SKT
60460304 1-1/2D 3-1/8 SKT
60460306 1-1/2D 3-3/16 SKT
60460308 1-1/2D 3-1/4 SKT
60460310 1-1/2D 3-5/16 SKT
60460312 1-1/2D 3-3/8 SKT
60460314 1-1/2D 3-7/16 SKT
60460316 1-1/2D 3-1/2 SKT
60460318 1-1/2D 3-9/16 SKT
60460320 1-1/2D 3-5/8 SKT
60460322 1-1/2D 3-11/16 SKT
IMPACT SOCKETS
90 91
IMPACT SOCKETS
2-1/2" Sq Dr "METRIC PRODUCT DESCRIPTION 2-1/2" Sq Dr "SAE" PRODUCT
DESCRIPTION60581075 2-1/2D 75MM SKT 60481300 2-1/2D 3 SKT
60581077 2-1/2D 77MM SKT 60481304 2-1/2D 3-1/8 SKT
60581080 2-1/2D 80MM SKT 60481308 2-1/2D 3-1/4 SKT
60581085 2-1/2D 85MM SKT 60481312 2-1/2D 3-3/8 SKT
60581090 2-1/2D 90MM SKT 60481316 2-1/2D 3-1/2 SKT
60581095 2-1/2D 95MM SKT 60481320 2-1/2D 3-5/8 SKT
60581100 2-1/2D 100MM SKT 60481324 2-1/2D 3-3/4 SKT
60581105 2-1/2D 105MM SKT 60481404 2-1/2D 4-1/8 SKT
60581110 2-1/2D 110MM SKT 60481408 2-1/2D 4-1/4 SKT
60581115 2-1/2D 115MM SKT 60481412 2-1/2D 4-3/8 SKT
60581120 2-1/2D 120MM SKT 60481416 2-1/2D 4-1/2 SKT
60581125 2-1/2D 125MM SKT 60481420 2-1/2D 4-5/8 SKT
60581130 2-1/2D 130MM SKT 60481424 2-1/2D 4-3/4 SKT
60581135 2-1/2D 135MM SKT 60481428 2-1/2D 4-7/8 SKT
60581140 2-1/2D 140MM SKT 60481500 2-1/2D 5 SKT
60581145 2-1/2D 145MM SKT 60481504 2-1/2D 5-1/8 SKT
60581150 2-1/2D 150MM SKT 60481508 2-1/2D 5-1/4 SKT
60581155 2-1/2D 155MM SKT 60481512 2-1/2D 5-3/8 SKT
60581160 2-1/2D 160MM SKT 60481516 2-1/2D 5-1/2 SKT
60581165 2-1/2D 165MM SKT 60481520 2-1/2D 5-5/8 SKT
60581170 2-1/2D 170MM SKT 60481524 2-1/2D 5-3/4 SKT
60481528 2-1/2D 5-7/8 SKT
60481600 2-1/2D 6 SKT
60481604 2-1/2D 6-1/8 SKT
60481608 2-1/2D 6-1/4 SKT
60481612 2-1/2D 6-3/8 SKT
60481616 2-1/2D 6-1/2 SKT
60481620 2-1/2D 6-5/8 SKT
60481624 2-1/2D 6-3/4 SKT
60481628 2-1/2D 6-7/8 SKT
60481700 2-1/2D 7 SKT
64826004 1/2D 4MM SKT, IN-HEX 64841016 3/4D 1/2 SKT, IN-HEX
64826005 1/2D 5MM SKT, IN-HEX 64841018 3/4D 9/16 SKT, IN-HEX
64826006 1/2D 6MM SKT, IN-HEX 64841020 3/4D 5/8 SKT, IN-HEX
64826007 1/2D 7MM SKT, IN-HEX 64841024 3/4D 3/4 SKT, IN-HEX
64826008 1/2D 8MM SKT, IN-HEX 64841028 3/4D 7/8 SKT, IN-HEX
64826009 1/2D 9MM SKT, IN-HEX 64841100 3/4D 1 SKT, IN-HEX
64826010 1/2D 10MM SKT, IN-HEX
64826011 1/2D 11MM SKT, IN-HEX
64826012 1/2D 12MM SKT, IN-HEX
64826014 1/2D 14MM SKT, IN-HEX 64856014 1D 14MM SKT, IN-HEX
64826015 1/2D 15MM SKT, IN-HEX 64856017 1D 17MM SKT, IN-HEX
64826016 1/2D 16MM SKT, IN-HEX 64856019 1D 19MM SKT, IN-HEX
64826017 1/2D 17MM SKT, IN-HEX 64856022 1D 22MM SKT, IN-HEX
64826018 1/2D 18MM SKT, IN-HEX 64856024 1D 24MM SKT, IN-HEX
64826019 1/2D 19MM SKT, IN-HEX
64851020 1D 5/8 SKT, IN-HEX
64821006 1/2D 3/16 SKT, IN-HEX 64851024 1D 3/4 SKT, IN-HEX
64821007 1/2D 7/32 SKT, IN-HEX 64851028 1D 7/8 SKT, IN-HEX
64821008 1/2D 1/4 SKT, IN-HEX 64851100 1D 1 SKT, IN-HEX
64821009 1/2D 9/32 SKT, IN-HEX
64821010 1/2D 5/16 SKT, IN-HEX
64821012 1/2D 3/8 SKT, IN-HEX
64821014 1/2D 7/16 SKT, IN-HEX
64821016 1/2D 1/2 SKT, IN-HEX
64821018 1/2D 9/16 SKT, IN-HEX
64821020 1/2D 5/8 SKT, IN-HEX
64821022 1/2D 11/16 SKT, IN-HEX
64821024 1/2D 3/4 SKT, IN-HEX
64846010 3/4D 10MM SKT, IN-HEX
64846012 3/4D 12MM SKT, IN-HEX
64846014 3/4D 14MM SKT, IN-HEX
64846017 3/4D 17MM SKT, IN-HEX
64846019 3/4D 19MM SKT, IN-HEX
64846022 3/4D 22MM SKT, IN-HEX
64846024 3/4D 24MM SKT, IN-HEX
64846027 3/4D 27MM SKT, IN-HEX
PRODUCT DESCRIPTION
3/4 Sq Dr "SAE" HEX DRIVER
PRODUCT DESCRIPTION
1" Sq Dr "METRIC" HEX DRIVER
PRODUCT DESCRIPTION
1" Sq Dr "SAE" HEX DRIVER
PRODUCT DESCRIPTION
1/2 Sq Dr METRIC HEX DRIVER
PRODUCT DESCRIPTION
1/2 Sq Dr "SAE" HEX DRIVER
PRODUCT DESCRIPTION
3/4 Sq Dr "METRIC" HEX DRIVER
IMPACT SOCKETS
92 93
IMPACT SOCKETS
IMPACT EXTENSION BARS
PRODUCT DESCRIPTION
64501050 1/4D EXT 50MM
64501100 1/4D EXT 100MM
64501150 1/4D EXT 150MM
64511075 3/8D EXT 75MM
64511125 3/8D EXT 125MM
64521075 1/2D EXT 75MM
64521125 1/2D EXT 125MM
64521250 1/2D EXT 250MM
64521460 1/2D EXT 460MM
64521610 1/2D EXT 610MM
64542100 3/4D EXT 100MM
64542175 3/4D EXT 175MM
64542250 3/4D EXT 250MM
64542330 3/4D EXT 330MM
64552175 1D EXT 175MM
64552250 1D EXT 250MM
64552330 1D EXT 330MM
64552400 1D EXT 400MM
64562125 1-1/2D EXT 125MM
64562250 1-1/2D EXT 250MM
64562500 1-1/2D EXT 500MM
64582125 2-1/2D EXT 125MM
64582250 2-1/2D EXT 250MM
64582500 2-1/2D EXT 500MM
IMPACT ADAPTERS PRODUCT DESCRIPTION
64001012 1/4FX3/8M ADP
64011016 3/8FX1/2M ADP
64021012 1/2FX3/8M ADP
64021024 1/2FX3/4M ADP
64041016 3/4FX1/2M ADP
64041100 3/4FX1M ADP
64051024 1FX3/4M ADP
64052116 1FX1-1/2M ADP
64062100 1-1/2FX1M ADP
64062216 1-1/2FX2-1/2M ADP
64082116 2-1/2FX1-1/2M ADP
64141024 3/4D UNI JOINT
64162116 1-1/2D UNI JOINT
64211012 3/8D UNI JOINT
64221016 1/2D UNI JOINT
64301008 1/4D UNI JOINT
64382216 2-1/2D UNI JOINT
6435B100 1D UNI JOINT
PRODUCT DESCRIPTION
IMPACT UNIVERSAL JOINTS
94
top related