pinout diagram - adafruit industries · usb to serial converter micro sd card reader ambient light...

USB to serial converter

Micro SD card reader

Ambient light sensor (LTR-329ALS-01)

Barometric pressure sensor and altimeter (MPL3115A2)

USB

Charge indicator LED

JST for LiPo battery (450mA)(BQ24040)

Temperature and humidity sensor (Si7006-A20)

PowerGNDSerial PinExternal IO PinControl

Correct Board MountingRGB LED must be at the top of the board, above the USB connector

* Interrupts EXT_IO0, EXT_IO4 & EXT_IO5 are connected to a PIC and are accessible via Pycom Libraries

RGBLED

Pinout diagram

5VGND3V3

1 3 5 7

2 4 6 8

9

10

G10G9G8

SD_CLKSDASCL

G7G6G30G31G3G0G4G5 Accelerometer Interrupt

G2G1G23G24G11G12G13G14G15G16G17G22G28

UART_RXP0P1P2P3P4

P8

P23P22P21

P14P13

P9P10P11

UART_TXRGB_LEDPWR_ENSD_CMD

SD_DATEXT_IO1EXT_IO2EXT_IO3 Button

Accelerometer (LIS2HH12), Ambient Light (LTR-329ALS-01), Barometric (MPL3115A2), Humidty and Temperature (Si7006-A20)

External IO Header

Reset

5

1234

109876

GNDPWR_EN3V3_Sensors3V3_PymoduleEXT_IO0 (RGB_LED)EXT_IO1EXT_IO2EXT_IO3EXT_IO4EXT_IO5

Distributed by Pycom Ltd.Copyright © 2017 by Pycom Ltd. All rights reserved. No part of this document may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior

written permission of Pycom Ltd, except in the case of brief quotations embodied in critical reviews and certain other noncommercial uses permitted by copyright law.

To order contact sales@pycom.io

Button

Accelerometer (LIS2HH12)