pio-b150m - asus€¦ · pio-b150m specifications summary (continued on the next page) package...
Post on 04-Oct-2020
1 Views
Preview:
TRANSCRIPT
Mot
herb
oard
PIO-B150M
ii
E11392First EditionMarch 2016
Copyright © 2016 ASUSTeK COMPUTER INC. All Rights Reserved.No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.
Offer to Provide Source Code of Certain SoftwareThis product contains copyrighted software that is licensed under the General Public License (“GPL”), under the Lesser General Public License Version (“LGPL”) and/or other Free Open Source Software Licenses. Such software in this product is distributed without any warranty to the extent permitted by the applicable law. Copies of these licenses are included in this product.Where the applicable license entitles you to the source code of such software and/or other additional data, you may obtain it for a period of three years after our last shipment of the product, either(1) for free by downloading it from http://support.asus.com/downloador(2) for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location where you want to have it shipped to, by sending a request to:
ASUSTeK Computer Inc.Legal Compliance Dept.15 Li Te Rd.,Beitou, Taipei 112Taiwan
In your request please provide the name, model number and version, as stated in the About Box of the product for which you wish to obtain the corresponding source code and your contact details so that we can coordinate the terms and cost of shipment with you.The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as the corresponding binary/object code.This offer is valid to anyone in receipt of this information.ASUSTeK is eager to duly provide complete source code as required under various Free Open Source Software licenses. If however you encounter any problems in obtaining the full corresponding source code we would be much obliged if you give us a notification to the email address gpl@asus.com, stating the product and describing the problem (please DO NOT send large attachments such as source code archives, etc. to this email address).
iii
Contents
Safety information ...................................................................................... iv
About this guide ......................................................................................... iv
Package contents ....................................................................................... vi
PIO-B150M specifications summary ......................................................... vi
Chapter 1: Product introductionMotherboard overview ............................................................................. 1-1
Central Processing Unit (CPU) ................................................................ 1-7
System memory ........................................................................................ 1-8
Intel® SBB support ................................................................................... 1-9
Chapter 2: BIOS informationBIOS setup program ................................................................................. 2-1
EZ Mode ..................................................................................................... 2-2
Advanced Mode ........................................................................................ 2-3
Exit menu ................................................................................................... 2-4
AppendicesNotices .......................................................................................................A-1
ASUS contact information .......................................................................A-4
iv
Safety informationElectrical safety• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet
before relocating the system.
• When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
• Before connecting or removing signal cables from the motherboard, ensure that all power cables are unplugged.
• Seek professional assistance before using an adapter or extension cord. These devices could interrupt the grounding circuit.
• Ensure that your power supply is set to the correct voltage in your area. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company.
• If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
Operation safety• Before installing the motherboard and adding components, carefully read all the manuals
that came with the package.
• Before using the product, ensure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.
• To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry.
• Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may be exposed to moisture.
• Place the product on a stable surface.
• If you encounter technical problems with the product, contact a qualified service technician or your retailer.
About this guideThis user guide contains the information you need when installing and configuring the motherboard.
How this guide is organizedThis guide contains the following parts:
• Chapter1:Productintroduction
This chapter describes the features of the motherboard and the new technology it supports. It includes descriptions of the switches, jumpers, and connectors on the motherboard.
• Chapter2:BIOSinformation
This chapter discusses changing system settings through the BIOS Setup menus. Detailed descriptions for the BIOS parameters are also provided.
v
Where to find more informationRefer to the following sources for additional information and for product and software updates.
1. ASUS websites
The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information.
2. Optional documentation
Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer. These documents are not part of the standard package.
Conventions used in this guideTo ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual.
DANGER/WARNING: Information to prevent injury to yourself when completing a task.
CAUTION: Information to prevent damage to the components when completing a task
IMPORTANT: Instructions that you MUST follow to complete a task.
NOTE: Tips and additional information to help you complete a task.
Typography
Bold text Indicates a menu or an item to select.
Italics Used to emphasize a word or a phrase.
<Key> Keys enclosed in the less-than and greater-than sign means that you must press the enclosed key.
Example: <Enter> means that you must press the Enter or Return key.
<Key1> + <Key2> + <Key3> If you must press two or more keys simultaneously, the key names are linked with a plus sign (+).
vi
PIO-B150M specifications summary
(continued on the next page)
Package contentsCheck your motherboard package for the following items.
Motherboard ASUS PIO-B150M motherboard
Cables 1 x Serial ATA 6.0 Gb/s cable
Accessories 1 x I/O Shield
Application DVD Support DVD
Documentation User Manual
If any of the above items is damaged or missing, contact your retailer.
CPU
LGA1151 socket for 6th Generation Intel® Core™ i7 / i5 / i3, Pentium®, and Celeron® processors*
Supports Intel® 14nm CPU
Supports Intel® Turbo Boost Technology 2.0** The Intel® Turbo Boost Technology 2.0 support depends on the CPU types.
* Refer to www.asus.com for Intel® CPU support list
Chipset Intel® B150 Chipset
Memory
2x DIMMs, max 32 GB, DDR4 2133 MHz, non-ECC, un-buffered memory
Dual-channel memory architecture
Supports Intel® Extreme Memory Profile (XMP)* Hyper DIMM support is subject to the physical characteristics of individual CPUs. Please
refer to the Memory QVL for details.
** Refer to www.asus.com for the latest Memory QVL (Qualified Vendors List).
*** The supported maximum memory frequency varies with the processor.
Expansion slots
1 x PCI Express x16 slot (@ x16 mode)
1 x mPCIe/mSATA combo
GraphicsIntegrated graphics processor - Intel® HD Graphics support
- Supports HDMI with maximum resolution 4096 x 2160 @24Hz / 2560 x 1600 @60Hz
Storage
Intel® B150 Chipset
- 2 x SATA 6.0 Gb/s connectors
- 1 x M.2 Socket 3 with M Key, type 2260/2280 storage devices support (both SATA & PCIe mode)
USB
Intel® B150 Chipset - supports ASUS USB 3.0 Boost- 6 x USB 3.0 / 2.0 ports (2 ports at mid-board; 4 ports at the rear panel, blue)
Intel® B150 Chipset- 2 x USB 2.0 / 1.1 ports (2 ports at mid-board)
Audio
Realtek® ALC887 8-channel High Definition Audio CODEC
- Supports jack-detection, Front Panel Jack-Retasking, and Anti-pop function* Use a chassis with HD audio module in the front panel to support a 8-channel audio output.
vii
PIO-B150M specifications summary
LAN Realtek® 8111GR Gigabit LAN
Rear panel I/O ports
1 x PS/2 keyboard port (purple)
1 x PS/2 mouse port (green)
1 x HDMI port
4 x USB 3.0/2.0 ports
1 x LAN (RJ-45) port
3 x Audio jacks support 8-channel audio output
Internal connectors
1 x USB 3.0 / 2.0 connector supports additional 2 USB 3.0/ 2.0 ports
1 x USB 2.0 / 1.1 connector supports additional 2 USB 2.0/ 1.1 ports
2 x SATA 6.0 Gb/s connectors
1 x CPU fan connector
1 x Chassis Fan connector
1 x Front panel audio connector (AAFP)
1 x COM header
1 x 24-pin EATX power connector
1 x 4-pin EATX 12V power connector
1 x 14-1 pin TPM header
1 x CLRTC
1 x System panel connector
BIOS features
128 Mb Flash ROM, UEFI AMI BIOS, PnP, DMI 2.0, WfM2.0, SM BIOS 3.0, ACPI 5.0, Multi-language BIOS, ASUS EZ Flash 3, ASUS CrashFree BIOS 3, My Favorites, Quick Note, Last Modified Log, F12 PrintScreen function, and ASUS DRAM SPD (Serial Presence Detect) memory information
Manageability WfM 2.0, DMI 3.0, WOL by PME, PXE
Support DVD
Drivers
ASUS utilities
EZ Update
Anti-virus software (OEM version)
OS support
Windows® 10 (64-bit),
Windows® 8.1 (64-bit),
Windows® 7 (32-bit / 64-bit) ** Please refer to ASUS official website and download “Windows® 7 installation guide”
and “ASUS EZ installer” to install Windows® 7.
Form factor uATX form factor: 8 in. x 8 in. (20.32 cm x 20.32 cm)
Specifications are subject to change without notice.
ASUS PIO-B150M 1-1
Product introduction 1Motherboard overview
• Unplugthepowercordfromthewallsocketbeforetouchinganycomponent.
• Beforehandlingcomponents,useagroundedwriststraportouchasafelygroundedobjectorametalobject,suchasthepowersupplycase,toavoiddamagingthemduetostaticelectricity.
• Beforeyouinstallorremoveanycomponent,ensurethattheATXpowersupplyisswitchedofforthepowercordisdetachedfromthepowersupply.Failuretodosomaycauseseveredamagetothemotherboard,peripherals,orcomponents.
• Unplugthepowercordbeforeinstallingorremovingthemotherboard.Failuretodosocancauseyouphysicalinjuryanddamagetomotherboardcomponents.
Place this side towards
the rear of the chassis
ScantheQRcodetogetthedetailedpindefinitions.
PIO-B150M
PCIEX16_1
ASM1442K
RTL8111GR
AAFP
EA
TXP
WR
ATX12V
CPU_FAN COM
22802260
M.2
(SO
CK
ET3
)
BATTERY
SuperI/O
ALC887
HDMI
CLRTCSPEAKER
20.3cm(8.0in)
20.3
cm(8
.0in
)
DDR4 DIMM_A1 (64bit, 288-pin module)
DDR4 DIMM_B1 (64bit, 288-pin module)
SA
TA6G
_3
SA
TA6G
_4
MS
ATA
_MP
CIE
AUDIO
KBMS
USB3_56
LAN_USB3_34
CHA_FANLGA1151
DIGI+VRM
Intel®B150
F_PANELUSB78
US
B3_
12
128MbBIOS
TPM
1 32
891112 10 7
2
5
6
4
13
16
15
14
1-2 Chapter 1: Product introduction
PCI Express x16 slot
ThismotherboardsupportsPCIExpressx16graphiccardscomplyingwiththePCIExpressspecifications.
CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN)
Connectthefancablestothefanconnectorsonthemotherboard,ensuringthattheblackwireofeachcablematchesthegroundpinoftheconnector.
Donotforgettoconnectthefancablestothefanconnectors.Insufficientairflowinsidethesystemmaydamagethemotherboardcomponents.Thesearenotjumpers!Donotplacejumpercapsonthefanconnectors!TheCPU_FANconnectorsupportsaCPUfanofmaximum1A(12W)fanpower.
Serial port connector (10-1 pin COM)
Connecttheserialportmodulecabletothisconnector,theninstallthemoduletoaslotopeningatthebackofthesystemchassis.
ATX power connectors (24-pin EATXPWR, 4-pin EATX12V)
CorrectlyorienttheATXpowersupplyplugsintotheseconnectorsandpushdownfirmlyuntiltheconnectorscompletelyfit.
• Forafullyconfiguredsystem,werecommendthatyouuseapowersupplyunit(PSU)thatcomplieswithATX12VSpecification2.0(orlaterversion)andprovidesaminimumpowerof350W.
• Ifyouareuncertainabouttheminimumpowersupplyrequirementforyoursystem,refertotheRecommendedPowerSupplyWattageCalculatorathttp://support.asus.com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-usfordetails.
Intel® LGA1151 CPU socket
Install Intel® LGA1151CPU into this surfacemount LGA1151 socket,which isdesigned for 6thGeneration Intel®Core™ i7 / i5 / i3, Pentium®, andCeleron®processors.
Formoredetails,refertoCentral Processing Unit (CPU).
DDR4 DIMM slots
Install2GB,4GB,8GB,and16GBunbufferednon-ECCDDR4DIMMsintotheseDIMMsockets.
Formoredetails,refertoSystem memory.
ASUS PIO-B150M 1-3
System panel connector (10-1 pin PANEL)
Thisconnectorsupportsseveralchassis-mountedfunctions.
Speaker connector (4-pin SPEAKER)
This4-pinconnectorisforthechassis-mountedsystemwarningspeaker.Thespeakerallowsyoutohearsystembeepsandwarnings.
Clear RTC RAM (2-pin CLRTC)
ThisheaderallowsyoutocleartheCMOSRTCRAMdataofthesystemsetupinformationsuchasdate,time,andsystempasswords.
To erase the RTC RAM:
1. TurnOFFthecomputerandunplugthepowercord.
2. Useametalobjectsuchasascrewdrivertoshortthetwopins.
3. PlugthepowercordandturnONthecomputer.
4. Holddownthe<Del>keyduringthebootprocessandenterBIOSsetuptore-enterdata.
CLRTC
+3V
_BA
TG
ND
PIN 1
Ifthestepsabovedonothelp,removetheonboardbatteryandshortthetwopinsagaintocleartheCMOSRTCRAMdata.AfterclearingtheCMOS,reinstallthebattery.
TPM connector (14-1 pin TPM)
ThisconnectorsupportsaTrustedPlatformModule(TPM)system,whichcansecurelystorekeys,digitalcertificates,passwordsanddata.ATPMsystemalsohelpsenhancenetworksecurity,protectsdigitalidentities,andensuresplatformintegrity.
TPM
PIN 1
+3VSBS_PCIRST#_TBD
GNDC_PCICLK_TPM
+3V+3V
F_CLKRUNF_SERIRQF_FRAME#F_LAD3F_LAD2F_LAD1F_LAD0
USB 2.0 connector (10-1 pin 78)
ConnecttheUSBmodulecabletothisconnector,theninstallthemoduletoaslotopeningatthebackofthesystemchassis.ThisUSBconnectorcomplieswithUSB2.0specificationsandsupportsupto480Mbpsconnectionspeed.
1-4 Chapter 1: Product introduction
Front panel audio connector (10-1 pin AAFP)
Thisconnectorisforachassis-mountedfrontpanelaudioI/OmodulethatsupportseitherHDAudioorlegacyAC`97audiostandard.ConnectoneendofthefrontpanelaudioI/Omodulecabletothisconnector.
• Werecommendthatyouconnectahigh-definitionfrontpanelaudiomoduletothisconnectortoavailofthemotherboard’shigh-definitionaudiocapability.
• Ifyouwanttoconnectahigh-definitionfrontpanelaudiomoduletothisconnector,settheFrontPanelTypeitemintheBIOSsetupto[HDAudio].IfyouwanttoconnectanAC’97frontpanelaudiomoduletothisconnector,settheitemto[AC97].Bydefault,thisconnectorissetto[HDAudio].
mSATA/mPCIe slot (MSATA_MPCIE)
ThisslotallowsyoutoinstallafulllengthmSATAormini-PCIecard,providingyouwithexpandabilityandconnectivitysolutionsforanoptimalsystemperformance.
YoucaninstalleitheranmSATAcardoranmPCIecardintothisslotoneatatime.
Intel® Serial ATA 6.0Gb/s connectors (7-pin SATA6G_3~6)
TheseconnectorsconnecttoSerialATA6.0Gb/sharddiskdrivesviaSerialATA6.0Gb/ssignalcables.
Whenusinghot-plugandNCQ,settheSATA Mode SelectionitemintheBIOSto[AHCI].
USB 3.0 connector (20-1 pin USB3_12)
ConnectaUSB3.0moduletothisconnectorforadditionalUSB3.0frontorrearpanelports.ThisconnectorcomplieswithUSB3.0specificationsandprovidesfasterdatatransferspeedsofupto5Gbps,fasterchargingtimeforUSB-chargeabledevices,optimizedpowerefficiency,andbackwardcompatibilitywithUSB2.0
M.2 socket 3
ThissocketallowsyoutoinstallanM.2(NGFF)SSDmodule.
• ThissocketsupportsMKeyand2260/2280storagedevices.
• WhenusingIntel®DesktopResponsivenesstechnologieswithPCIeM.2device,ensuretosetuptheWindows®UEFIoperatingsystemunderRAIDmode.
M.2(SOCKET3)
ASUS PIO-B150M 1-5
Activity/Link LED Speed LEDStatus Description Status DescriptionOff Nolink OFF 10MbpsconnectionOrange Linked ORANGE 100MbpsconnectionOrange(Blinking) Dataactivity GREEN 1GbpsconnectionOrange(Blinkingthensteady)
ReadytowakeupfromS5mode
_ _
LAN port
Speed LED
Activity Link LED
Rear panel connectors
3 41
57
2
68
1. LAN (RJ-45) port.ThisportallowsGigabitconnectiontoaLocalAreaNetwork(LAN)throughanetworkhub.
LAN port LED indications
2. PS/2 mouse port (green).ThisportisforaPS/2mouse.
3. Line In port (light blue).Thisportconnectstothetape,CD,DVDplayer,orotheraudiosources.
4. Line Out port (lime).Thisportconnectstoaheadphoneoraspeaker.Inthe4.1,5.1and7.1-channelconfigurations,thefunctionofthisportbecomesFrontSpeakerOut.
5. Microphone port (pink).Thisportconnectstoamicrophone.
Refertotheaudioconfigurationtableforthefunctionoftheaudioportsin2.1,4.1,5.1,or7.1-channelconfiguration.
1-6 Chapter 1: Product introduction
Audio 2.1, 4.1, 5.1, or 7.1-channel configuration
PortHeadset
2.1-channel4.1-channel 5.1-channel 7.1-channel
LightBlue(Rearpanel) LineIn RearSpeakerOut RearSpeakerOut RearSpeakerOutLime(Rearpanel) LineOut FrontSpeakerOut FrontSpeakerOut FrontSpeakerOutPink(Rearpanel) MicIn MicIn Bass/Center Bass/CenterLime(Frontpanel) - - - SideSpeakerOut
To configure a 7.1-channel audio output:
UseachassiswithHDaudiomoduleinthefrontpaneltosupporta7.1-channelaudiooutput.
6. PS/2 keyboard port (purple).ThisportisforaPS/2keyboard.
7. USB 3.0 ports.These9-pinUniversalSerialBus(USB)portsareforUSB3.0/2.0devices.
• USB3.0devicescanonlybeusedfordatastorage.
• WestronglyrecommendthatyouconnectUSB3.0devicestoUSB3.0portsforfasterandbetterperformancefromyourUSB3.0devices.
• DuetothedesignoftheIntel®100serieschipset,allUSBdevicesconnectedtotheUSB2.0andUSB3.0portsarecontrolledbythexHCIcontroller.SomelegacyUSBdevicesmustupdatetheirfirmwareforbettercompatibility.
8. HDMI port.ThisportisforaHigh-DefinitionMultimediaInterface(HDMI)connector,andisHDCPcompliantallowingplaybackofHDDVD,Blu-ray,andotherprotectedcontent.
ASUS PIO-B150M 1-7
Central Processing Unit (CPU)ThismotherboardcomeswithasurfacemountLGA1151socketdesignedfor6thGenerationIntel®Core™i7/i5/i3,Pentium®,andCeleron®processors.
• EnsurethatyouinstallthecorrectCPUdesignedfortheLGA1151socketonly.DONOTinstallaCPUdesignedforLGA1150,LGA1155andLGA1156socketsontheLGA1151socket.
• Uponpurchaseofthemotherboard,ensurethatthePnPcapisonthesocketandthesocketcontactsarenotbent.ContactyourretailerimmediatelyifthePnPcapismissing,orifyouseeanydamagetothePnPcap/socketcontacts/motherboardcomponents.
• Keepthecapafterinstallingthemotherboard.ASUSwillprocessReturnMerchandiseAuthorization(RMA)requestsonlyifthemotherboardcomeswiththecapontheLGA1151socket.
• TheproductwarrantydoesnotcoverdamagetothesocketcontactsresultingfromincorrectCPUinstallation/removal,ormisplacement/loss/incorrectremovalofthePnPcap.
Installing the CPU
1
4
UnplugallpowercablesbeforeinstallingtheCPU.
ApplytheThermalInterfaceMaterialtotheCPUheatsinkandCPUbeforeyouinstalltheheatsinkandfanifnecessary.
2
3
A
B
A
B
C
D5
4
4
5
1-8 Chapter 1: Product introduction
System memory
OverviewThismotherboardcomeswithtwoDoubleDataRate4(DDR4)DualInlineMemoryModule(DIMM)sockets.ThefigureillustratesthelocationoftheDDR4DIMMsockets:
Channel Sockets
ChannelA DIMM_A1ChannelB DIMM_B1
DIMM_A1DIMM_B1
• YoumayinstallvaryingmemorysizesinChannelAandChannelB.Thesystemmapsthetotalsizeofthelower-sizedchannelforthedual-channelconfiguration.Anyexcessmemoryfromthehigher-sizedchannelisthenmappedforsingle-channeloperation.
• AlwaysinstalltheDIMMSwiththesameCASLatency.Foranoptimumcompatibility,werecommendthatyouinstallmemorymodulesofthesameversionordatacode(D/C)fromthesamevendor.Checkwiththevendortogetthecorrectmemorymodules.
• AccordingtoIntel®CPUspec,DIMMvoltagebelow1.35VisrecommendedtoprotecttheCPU.
• Duetothememoryaddresslimitationon32-bitWindows®OS,whenyouinstall4GBormorememoryonthemotherboard,theactualusablememoryfortheOScanbeabout3GBorless.Foreffectiveuseofmemory,werecommendthatyoudoanyofthefollowing:
- Useamaximumof3GBsystemmemoryifyouareusinga32-bitWindows®OS.
- Installa64-bitWindows®OSifyouwanttoinstall4GBormoreonthemotherboard.
- Formoredetails,refertotheMicrosoft®supportsiteathttp://support.microsoft.com/kb/929605/en-us.
VisittheASUSwebsiteatwww.asus.comforthelatestQVL.
Installing a DIMM
1 2
To remove a DIMM
B
A
B
A
A
BIOS information 2• ScantheQRcodetoviewtheBIOSupdateguide.
• BeforeusingtheASUSCrashFreeBIOS3utility,renametheBIOSfileintheremovabledeviceintoPIOB150M.CAP.
BIOS setup programUsetheBIOSSetupprogramtoupdatetheBIOSorconfigureitsparameters.TheBIOSscreensincludenavigationkeysandbriefonlinehelptoguideyouinusingtheBIOSSetupprogram.
Entering BIOS Setup at startupTo enter BIOS Setup at startup:
Press<Delete>or<F2>duringthePower-OnSelfTest(POST).Ifyoudonotpress<Delete>or<F2>,POSTcontinueswithitsroutines.
Entering BIOS Setup after POSTTo enter BIOS Setup after POST:
• Press<Ctrl>+<Alt>+<Del>simultaneously.
• Presstheresetbuttononthesystemchassis.
• Pressthepowerbuttontoturnthesystemoffthenbackon.DothisoptiononlyifyoufailedtoenterBIOSSetupusingthefirsttwooptions.
Usingthepowerbutton,resetbutton,orthe<Ctrl>+<Alt>+<Del>keystoforceresetfromarunningoperatingsystemcancausedamagetoyourdataorsystem.Werecommendyoualwaysshutdownthesystemproperlyfromtheoperatingsystem.
• TheBIOSsetupscreensshowninthissectionareforreferencepurposesonly,andmaynotexactlymatchwhatyouseeonyourscreen.
• VisittheASUSwebsiteatwww.asus.comtodownloadthelatestBIOSfileforthismotherboard.
• IfthesystembecomesunstableafterchanginganyBIOSsetting,loadthedefaultsettingstoensuresystemcompatibilityandstability.SelecttheLoad Optimized DefaultsitemundertheExitmenuorpresshotkeyF5.
• IfthesystemfailstobootafterchanginganyBIOSsetting,trytocleartheCMOSandresetthemotherboardtothedefaultvalue.SeesectionMotherboard overviewforinformationonhowtoerasetheRTCRAM.
BIOS menu screenTheBIOSsetupprogramcanbeusedundertwomodes:EZ ModeandAdvanced Mode.Press<F7>tochangebetweenthetwomodes.
ASUS PIO-B150M2-1
EZ ModeBydefault,theEZModescreenappearswhenyouentertheBIOSsetupprogram.TheEZModeprovidesyouanoverviewofthebasicsysteminformation,andallowsyoutoselectthedisplaylanguage,systemperformancemode,fanprofileandbootdevicepriority.ToaccesstheAdvancedMode,clickAdvanced Mode(F7)orpress<F7>.
ThedefaultscreenforenteringtheBIOSsetupprogramcanbechanged.RefertotheSetup Modeiteminsection2.8 Boot menufordetails.
Thebootdeviceoptionsvarydependingonthedevicesyouinstalledtothesystem.
Saves the changes and resets the
system
Selects the display language of the BIOS setup program
Displays the CPU/motherboard temperature, CPU voltage output, CPU/chassis fan speed, and SATA information
Displays the system properties of the selected mode. Click <Enter> to
switch EZ System Tuning modes
Displays the Advanced mode
menus
Selects the boot device priorityLoads optimized
default settings
Shows the bootable devicesDisplays the CPU Fan’s speed.
Click the button to manually tune the fans
Search on FAQs
2-2Chapter 2: Getting started
Configuration fields
Menu bar
General helpSub-menu item
Menu items
Scroll bar Last modified settings
Language Hot Keys
MyFavorite Q-Fan control
Goes back to EZ Mode
Displays the CPU temperature, CPU and memory voltage output
Quick Note
Advanced ModeTheAdvancedModeprovidesadvancedoptionsforexperiencedend-userstoconfiguretheBIOSsettings.ThefigurebelowshowsanexampleoftheAdvanced Mode.Refertothefollowingsectionsforthedetailedconfigurations.
ToaccesstheEZMode,clickEzMode(F7)orpress<F7>.
Popup window Search on FAQs
ASUS PIO-B150M2-3
Load Optimized DefaultsThisoptionallowsyoutoloadthedefaultvaluesforeachoftheparametersontheSetupmenus.Whenyouselectthisoptionorifyoupress<F5>,aconfirmationwindowappears.SelectOKtoloadthedefaultvalues.
Save Changes & ResetOnceyouarefinishedmakingyourselections,choosethisoptionfromtheExitmenutoensurethevaluesyouselectedaresaved.Whenyouselectthisoptionorifyoupress<F10>,aconfirmationwindowappears.SelectOKtosavechangesandexit.
Discard Changes and ExitThisoptionallowsyoutoexittheSetupprogramwithoutsavingyourchanges.Whenyouselectthisoptionorifyoupress<Esc>,aconfirmationwindowappears.SelectOKtodiscardchangesandexit.
Launch EFI Shell from USB drivesThisoptionallowsyoutoattempttolaunchtheEFIShellapplication(shellx64.efi)fromoneoftheavailableUSBdevices.
Exit menuTheExitmenuitemsallowyoutoloadtheoptimaldefaultvaluesfortheBIOSitems,andsaveordiscardyourchangestotheBIOSitems.
Search on FAQMoveyourmouseoverthisbuttontoshowaQRcode.ScanthisQRcodewithyourmobiledevicetoconnecttotheASUSBIOSFAQwebpage.YoucanalsoscantheQRcodebelow.
2-4Chapter 2: Getting started
AppendicesNotices
Federal Communications Commission StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The use of shielded cables for connection of the monitor to the graphics card is required toassurecompliancewithFCCregulations.Changesormodificationstothisunitnotexpressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
IC: Canadian Compliance StatementComplieswiththeCanadianICES-003ClassBspecifications.ThisdevicecomplieswithRSS210 of Industry Canada. This Class B device meets all the requirements of the Canadian interference-causing equipment regulations. This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cut appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada. Cet appareil numérique de la Classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. Cet appareil est conforme aux normes CNR exemptes de licence d’Industrie Canada. Le fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas provoquer d’interférences et (2) cet appareil doit accepter toute interférence, y compris celles susceptibles de provoquer un fonctionnement non souhaité de l’appareil.
ASUS PIO-B150M A-1
REACHComplying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm.
DO NOT throw the motherboard in municipal waste. This product has been designed to enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin indicates that the product (electrical and electronic equipment) should not be placed in municipal waste. Check local regulations for disposal of electronic products.
DO NOT throw the mercury-containing button cell battery in municipal waste. This symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste.
ASUS Recycling/Takeback ServicesASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions.
Canadian Department of Communications StatementThis digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
VCCI: Japan Compliance Statement
VCCI Class B Statement
This is a Class B product based on the standard of the VCCI Council. If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual.
KC: Korea Warning Statement
A-2 Appendices
Google™ License TermsCopyright© 2014 Google Inc. All Rights Reserved.
LicensedundertheApacheLicense,Version2.0(the“License”);youmaynotusethisfileexcept in compliance with the License. You may obtain a copy of the License at:
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
SeetheLicenseforthespecificlanguagegoverningpermissionsandlimitationsundertheLicense.
Latviski Līdz ar šo AsusTek Inc. paziņo, ka šī ierīce atbilst būtiskajām prasībām un citiem saistošajiem nosacījumiem, kas norādīti CE direktīvā. Lai uzzinātu vairāk, skatiet CE Atbilstības deklarāciju.
Lietuvių Šiuo dokumentu bendrovė „AsusTek Inc.“ pareiškia, kad šis įrenginys atitinka pagrindinius CE direktyvų reikalavimus ir kitas susijusias nuostatas. Daugiau informacijos rasite CE atitikties deklaracijoje.
Norsk AsusTek Inc. erklærer herved at denne enheten er i samsvar med hovedsaklige krav og andre relevante forskrifter i CE-direktiver. Du finner mer informasjon i CE-samsvarserklæringen.
Polski Niniejszym AsusTek Inc. deklaruje, że to urządzenie jest zgodne z istotnymi wymaganiami oraz innymi powiązanymi zaleceniami Dyrektyw CE. W celu uzyskania szczegółów, sprawdź Deklarację zgodności CE.
Português A AsusTek Inc. declara que este dispositivo está em conformidade com os requisitos essenciais e outras disposições relevantes das Diretivas da CE. Para mais detalhes, consulte a Declaração de Conformidade CE.
Română Prin prezenta, AsusTek Inc. declară faptul că acest dispozitiv respectă cerinţele esenţiale şi alte prevederi relevante ale directivelor CE. Pentru mai multe detalii, consultaţi declaraţia de conformitate CE.
Srpski AsusTek Inc. ovim izjavljuje da je ovaj uređaj u saglasnosti sa ključnim zahtevima i drugim relevantnim odredbama CE Direktiva. Molimo vas, pogledajte CE Deklaraciju o usklađenosti za više detalja.
Slovensky Spoločnosť AsusTek Inc. týmto prehlasuje, že toto zariadenie vyhovuje príslušným požiadavkám a ďalším súvisiacim ustanoveniam smerníc ES. Viac podrobností si pozrite v prehlásení o zhode ES.
Slovenščina AsusTek Inc. tukaj izjavlja, da je ta naprava skladna s temeljnimi zahtevami in drugimi relevantnimi določili direktiv CE. Za več informacij glejte Izjavo CE o skladnosti.
Español Por la presente, AsusTek Inc. declara que este dispositivo cumple los requisitos básicos y otras disposiciones relevantes de las directivas de la CE. Consulte la Declaración de conformidad de la CE para obtener más detalles.
Svenska AsusTek Inc. förklarar härmed att denna enhet är i överensstämmelse med de grundläggande kraven och andra relevanta bestämmelser i CE-direktiven. Se CE-försäkran om överensstämmelse för mer information.
Українська AsusTek Inc. заявляє, що цей пристрій відповідає основним вимогам відповідних Директив ЄС. Будь ласка, див. більше подробиць у Декларації відповідності нормам ЄС.
Türkçe AsusTek Inc., bu aygıtın temel gereksinimlerle ve CE Yönergelerinin diğer ilgili koşullarıyla uyumlu olduğunu beyan eder. Daha fazla ayrıntı için lütfen CE Uygunluk Beyanına bakın.
Bosanski AsusTek Inc. ovim potvrđuje da je ovaj uređaj usklađen s osnovnim zahtjevima i drugim relevantnim propisima Direktiva EK. Za više informacija molimo pogledajte Deklaraciju o usklađenosti EK.
English AsusTek Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of CE Directives. Please see the CE Declaration of Conformity for more details.
Français AsusTek Inc. déclare par la présente que cet appareil est conforme aux critères essentiels et autres clauses pertinentes des directives européennes. Veuillez consulter la déclaration de conformité CE pour plus d’informations.
Deutsch AsusTek Inc. erklärt hiermit, dass dieses Gerät mit den wesentlichen Anforderungen und anderen relevanten Bestimmungen der CE-Richtlinien übereinstimmt. Weitere Einzelheiten entnehmen Sie bitte der CE-Konformitätserklärung.
Italiano AsusTek Inc. con la presente dichiara che questo dispositivo è conforme ai requisiti essenziali e alle altre disposizioni pertinenti alle direttive CE. Per maggiori informazioni fate riferimento alla dichiarazione di conformità CE.
Компания ASUS заявляет, что это устройство соответствует основным требованиям и другим соответствующим условиям европейских директив. Подробную информацию, пожалуйста, смотрите в декларации соответствия.
Български С настоящото AsusTek Inc. декларира, че това устройство е в съответствие със съществените изисквания и другите приложими постановления на директивите CE. Вижте CE декларацията за съвместимост за повече информация.
Hrvatski AsusTek Inc. ovim izjavljuje da je ovaj uređaj sukladan s bitnim zahtjevima i ostalim odgovarajućim odredbama CE direktiva. Više pojedinosti potražite u CE izjavi o sukladnosti.
Čeština Společnost AsusTek Inc. tímto prohlašuje, že toto zařízení splňuje základní požadavky a další příslušná ustanovení směrnic CE. Další podrobnosti viz Prohlášení o shodě CE.
Dansk AsusTek Inc. Erklærer hermed, at denne enhed er i overensstemmelse med hovedkravene and andre relevante bestemmelser i CE-direktiverne. Du kan læse mere i CE-overensstemmelseserklæring.
Nederlands AsusTek Inc. verklaart hierbij dat dit apparaat compatibel is met de essentiële vereisten en andere relevante bepalingen van CE-richtlijnen. Raadpleeg de CE-verklaring van conformiteit voor meer details.
Eesti Käesolevaga kinnitab AsusTek Inc., et see seade vastab CE direktiivide oluliste nõuetele ja teistele asjakohastele sätetele. Vt üksikasju CE vastavusdeklaratsioonist.
Suomi AsusTek Inc. vakuuttaa täten, että tämä laite on CE-direktiivien olennaisten vaatimusten ja muiden asiaan kuuluvien lisäysten mukainen. Katso lisätietoja CE-vaatimustenmukaisuusvakuutuksesta.
Ελληνικά Με το παρόν, η AsusTek Inc. Δηλώνει ότι αυτή η συσκευή συμμορφώνεται με τις θεμελιώδεις απαιτήσεις και άλλες σχετικές διατάξεις των Οδηγιών της ΕΕ. Για περισσότερες λεπτομέρειες ανατρέξτε στην Δήλωση Συμμόρφωσης ΕΕ.
Magyar Az AsusTek Inc. ezennel kijelenti, hogy a készülék megfelel a CE-irányelvek alapvető követelményeinek és ide vonatkozó egyéb rendelkezéseinek. További részletekért tekintse meg a CE-megfelelőségi nyilatkozatot.
ASUS PIO-B150M A-3
ASUS contact information
ASUSTeK COMPUTER INC.Address 4F, No. 150, Li-Te Rd., Peitou, Taipei 112, TaiwanTelephone +886-2-2894-3447Fax +886-2-2890-7798Web site www.asus.com/
Technical SupportTelephone +86-21-38429911Fax +86-21-5866-8722, ext. 9101#Online support http://qr.asus.com/techserv
ASUS COMPUTER INTERNATIONAL (America)Address 800 Corporate Way, Fremont, CA 94539, USATelephone +1-510-739-3777Fax +1-510-608-4555Web site http://www.asus.com/us/
Technical SupportSupport fax +1-812-284-0883Telephone +1-812-282-2787Online support http://qr.asus.com/techserv
ASUS COMPUTER GmbH (Germany and Austria)Address Harkort Str. 21-23, D-40880 Ratingen, GermanyFax +49-2102-959931Web site http://www.asus.com/deOnline contact http://eu-rma.asus.com/sales
Technical SupportTelephone +49-2102-5789555Support Fax +49-2102-959911Online support http://qr.asus.com/techserv
A-4 Appendices
EU D
ecla
ratio
n of
Con
form
ity
We,
the
unde
rsig
ned,
M
anuf
actu
rer:
A
SU
STe
K C
OM
PU
TER
INC
. A
ddre
ss:
4F, N
o. 1
50, L
I-TE
Rd.
, PE
ITO
U, T
AIP
EI 1
12, T
AIW
AN
A
utho
rized
repr
esen
tativ
e in
Eur
ope:
A
SU
S C
OM
PU
TER
Gm
bH
Add
ress
, City
: H
AR
KO
RT
STR
. 21-
23, 4
0880
RA
TIN
GE
N
Cou
ntry
: G
ER
MA
NY
decl
are
the
follo
win
g ap
para
tus:
Pr
oduc
t nam
e :
Mot
herb
oard
M
odel
nam
e :
PIO
-B15
0M
The
obje
ct o
f the
dec
lara
tion
desc
ribed
abo
ve is
in c
onfo
rmity
with
the
rele
vant
Uni
on h
arm
onis
atio
n le
gisl
atio
n:
EM
C –
Dire
ctiv
e 20
04/1
08/E
C (u
ntil
Apr
il 19
th, 2
016)
and
Dire
ctiv
e 20
14/3
0/EU
(fro
m A
pril
20th
, 201
6)
EN
550
22:2
010+
AC
:201
1 E
N 6
1000
-3-2
:201
4 E
N 5
5013
:200
1+A
1:20
03+A
2:20
06
EN
550
24:2
010
EN
610
00-3
-3:2
013
EN
550
20:2
007+
A11
:201
1 R
&TT
E –
Dire
ctiv
e 19
99/5
/EC
E
N 3
00 3
28 V
1.8.
1(20
12-0
6)
EN
300
440
-1 V
1.6.
1(20
10-0
8)
EN
300
440
-2 V
1.4.
1(20
10-0
8)
EN
301
511
V9.
0.2(
2003
-03)
E
N 3
01 9
08-1
V6.
2.1(
2013
-04)
E
N 3
01 9
08-2
V6.
2.1(
2013
-10)
E
N 3
01 9
08-1
3 V
6.2.
1(20
14-0
2)
EN
301
893
V1.
7.1(
2012
-06)
E
N 3
00 3
30-2
V1.
5.1(
2010
-02)
E
N 5
0360
:200
1/A
1:20
12
EN
624
79:2
010
EN
623
11:2
008
EN
301
489
-1 V
1.9.
2(20
11-0
9)
EN
301
489
-3 V
1.6.
1(20
13-1
2)
EN
301
489
-4 V
2.1.
1(20
13-1
2)
EN
301
489
-7 V
1.3.
1(20
05-1
1)
EN
301
489
-9 V
1.4.
1(20
07-1
1)
EN
301
489
-17
V2.
2.1(
2012
-09)
E
N 3
01 4
89-2
4 V
1.5.
1(20
10-0
9)
EN
301
357
-2 V
1.4.
1(20
08-1
1)
EN
302
291
-2 V
1.1.
1(20
05-0
7)
EN
302
623
V1.
1.1(
2009
-01)
E
N 5
0566
:201
3/A
C:2
014
EN
503
85:2
002
LVD
– D
irect
ive
2006
/95/
EC (u
ntil
Apr
il 19
th, 2
016)
and
Dire
ctiv
e 20
14/3
5/EU
(fro
m A
pril
20th
, 201
6)
EN
609
50-1
: 200
6 / A
12: 2
011
EN
609
50-1
: 200
6 / A
2: 2
013
EN
600
65:2
002
/ A12
: 201
1
Eco
desi
gn –
Dire
ctiv
e 20
09/1
25/E
C
Reg
ulat
ion
(EC
) No.
127
5/20
08
Reg
ulat
ion
(EC
) No.
642
/200
9 R
egul
atio
n (E
C) N
o. 2
78/2
009
Reg
ulat
ion
(EU
) No.
617
/201
3
RoH
S –
Dire
ctiv
e 20
11/6
5/EU
V
er. 1
6021
7 C
E m
arki
ng
E
quip
men
t Cla
ss 1
S
igna
ture
Jerr
y Sh
en
Prin
ted
Nam
e
CEO
P
ositi
on
Taip
ei, T
aiw
an
Pla
ce o
f iss
ue
29
/2/2
016
Dat
e of
issu
e
2016
Y
ear C
E m
arki
ng w
as fi
rst a
ffixe
d
(EU
con
form
ity m
arki
ng)
DE
CL
AR
AT
ION
OF
CO
NFO
RM
ITY
Pe
r FC
C P
art 2
Sec
tion
2. 1
077(
a)
R
espo
nsib
le P
arty
Nam
e:
Asu
s Com
pute
r In
tern
atio
nal
A
ddre
ss:
800
Cor
pora
te W
ay, F
rem
ont,
CA
945
39.
Phon
e/Fa
x N
o:
(510
)739
-377
7/(5
10)6
08-4
555
here
by d
ecla
res
that
the
prod
uct
Pr
oduc
t Nam
e : M
othe
rboa
rd
Mod
el N
umbe
r : P
IO-B
150M
Con
form
s to
the
follo
win
g sp
ecifi
catio
ns:
FCC
Par
t 15,
Sub
part
B, U
nint
entio
nal R
adia
tors
Su
pple
men
tary
Info
rmat
ion:
This
devi
ce c
ompl
ies w
ith p
art 1
5 of
the
FCC
Rul
es. O
pera
tion
is su
bjec
t to
the
follo
win
g tw
o co
nditi
ons:
(1) T
his
devi
ce m
ay n
ot c
ause
har
mfu
l int
erfe
renc
e,
and
(2) t
his d
evic
e m
ust a
ccep
t any
inte
rfere
nce
rece
ived
, inc
ludi
ng in
terfe
renc
e th
at m
ay c
ause
und
esire
d op
erat
ion.
R
epre
sent
ativ
e Pe
rson
’s N
ame
:
Stev
e C
hang
/ Pr
esid
ent
Sign
atur
e :
D
ate
:
M
ar. 1
4, 2
016
V
er. 1
4033
1
EU
Kon
form
itäts
erkl
ärun
g H
ierm
it er
klär
en w
ir,
Her
stel
ler:
A
SU
STe
K C
OM
PU
TER
INC
. A
nsch
rift:
4F, N
o. 1
50, L
I-TE
Rd.
, PE
ITO
U, T
AIP
EI 1
12, T
AIW
AN
B
evol
lmäc
htig
ter:
A
SU
S C
OM
PU
TER
Gm
bH
Ans
chrif
t des
Bev
ollm
ächt
igte
n:
HA
RK
OR
T S
TR. 2
1-23
, 408
80 R
ATI
NG
EN
Land
: G
ER
MA
NY
dass
nac
hste
hend
bez
eich
nete
Pro
dukt
e Pr
oduk
tbez
eich
nung
M
othe
rboa
rd
Mod
ellb
ezei
chnu
ng:
PI O
-B15
0M m
it de
n na
chst
ehen
d an
gege
bene
n, fü
r das
Pro
dukt
gel
tend
en R
icht
linie
n/B
estim
mun
gen
über
eins
timm
en:
EM
V –
Ric
htlin
ie 2
004/
108/
EG (b
is 1
9. A
pril
2016
) und
Ric
htlin
ie 2
014/
30/E
U (a
b 20
. Apr
il 20
16)
EN
550
22:2
010+
AC
:201
1 E
N 6
1000
-3-2
:201
4 E
N 5
5013
:200
1+A
1:20
03+A
2:20
06
EN
550
24:2
010
EN
610
00-3
-3:2
013
EN
550
20:2
007+
A11
:201
1 R
&TT
E –
Ric
htlin
ie 1
999/
5/EG
E
N 3
00 3
28 V
1.8.
1(20
12-0
6)
EN
300
440
-1 V
1.6.
1(20
10-0
8)
EN
300
440
-2 V
1.4.
1(20
10-0
8)
EN
301
511
V9.
0.2(
2003
-03)
E
N 3
01 9
08-1
V6.
2.1(
2013
-04)
E
N 3
01 9
08-2
V6.
2.1(
2013
-10)
E
N 3
01 9
08-1
3 V
6.2.
1(20
14-0
2)
EN
301
893
V1.
7.1(
2012
-06)
E
N 3
00 3
30-2
V1.
5.1(
2010
-02)
E
N 5
0360
:200
1/A
1:20
12
EN
624
79:2
010
EN
623
11:2
008
EN
301
489
-1 V
1.9.
2(20
11-0
9)
EN
301
489
-3 V
1.6.
1(20
13-1
2)
EN
301
489
-4 V
2.1.
1(20
13-1
2)
EN
301
489
-7 V
1.3.
1(20
05-1
1)
EN
301
489
-9 V
1.4.
1(20
07-1
1)
EN
301
489
-17
V2.
2.1(
2012
-09)
E
N 3
01 4
89-2
4 V
1.5.
1(20
10-0
9)
EN
301
357
-2 V
1.4.
1(20
08-1
1)
EN
302
291
-2 V
1.1.
1(20
05-0
7)
EN
302
623
V1.
1.1(
2009
-01)
E
N 5
0566
:201
3/A
C:2
014
EN
503
85:2
002
LVD
– R
icht
linie
200
6/95
/EG
(bis
19.
Apr
il 20
16) u
nd R
icht
linie
201
4/35
/EU
(ab
20. A
pril
2016
) E
N 6
0950
-1: 2
006
/ A12
: 201
1 E
N 6
0950
-1: 2
006
/ A2:
201
3 E
N 6
0065
:200
2 / A
12: 2
011
Öko
desi
gn –
Ric
htlin
ie 2
009/
125/
EG
Ver
ordn
ung
(EG
) No.
127
5/20
08
Ver
ordn
ung
(EG
) No.
642
/200
9 V
eror
dnun
g (E
G) N
o. 2
78/2
009
Ver
ordn
ung
(EU
) No.
617
/201
3
RoH
S –
Ric
htlin
ie 2
011/
65/E
U
Ver
. 160
217
CE
Ken
nzei
chen
G
erät
ekla
sse
1
U
nter
schr
ift
Je
rry
Shen
N
ame
C
EO
Pos
ition
Taip
ei, T
aiw
an
Ort
04
/03/
2016
D
atum
2016
Ja
hr d
er K
ennz
eich
enve
rgab
e
(EU
Kon
form
itäts
zeic
hen)
ASUS PIO-B150M A-5
DEC
LAR
ATI
ON
UE
DE
CO
NFO
RM
ITE
Nou
s, s
ouss
igné
s Fa
bric
ant:
AS
US
TeK
CO
MP
UTE
R IN
C.
Adr
esse
: 4F
, No.
150
, LI-T
E R
d., P
EIT
OU
, TA
IPE
I 112
, TA
IWA
N
Rep
rése
ntan
t aut
oris
é en
Eur
ope:
A
SU
S C
OM
PU
TER
Gm
bH
Adr
esse
, vill
e:
HA
RK
OR
T S
TR. 2
1-23
, 408
80 R
ATI
NG
EN
Pays
: G
ER
MA
NY
Déc
laro
ns l’
appa
reil
suiv
ant:
N
om d
u pr
odui
t :
Mot
herb
oard
N
om d
u m
odèl
e :
L’
obje
t de
la d
écla
ratio
n dé
crit
ci-d
essu
s es
t con
form
e av
ec la
légi
slat
ion
d’ha
rmon
isat
ion
de l’
Uni
on a
pplic
able
Dire
ctiv
e C
EM 2
004/
108/
CE
(jusq
u’au
19
avril
201
6) e
t la
dire
ctiv
e 20
14/3
0/U
E (à
par
tir d
u 20
avr
il 20
16)
EN
550
22:2
010+
AC
:201
1 E
N 6
1000
-3-2
:201
4 E
N 5
5013
:200
1+A
1:20
03+A
2:20
06
EN
550
24:2
010
EN
610
00-3
-3:2
013
EN
550
20:2
007+
A11
:201
1 D
irect
ive
R&
TTE
1999
/5/C
E E
N 3
00 3
28 V
1.8.
1(20
12-0
6)
EN
300
440
-1 V
1.6.
1(20
10-0
8)
EN
300
440
-2 V
1.4.
1(20
10-0
8)
EN
301
511
V9.
0.2(
2003
-03)
E
N 3
01 9
08-1
V6.
2.1(
2013
-04)
E
N 3
01 9
08-2
V6.
2.1(
2013
-10)
E
N 3
01 9
08-1
3 V
6.2.
1(20
14-0
2)
EN
301
893
V1.
7.1(
2012
-06)
E
N 3
00 3
30-2
V1.
5.1(
2010
-02)
E
N 5
0360
:200
1/A
1:20
12
EN
624
79:2
010
EN
623
11:2
008
EN
301
489
-1 V
1.9.
2(20
11-0
9)
EN
301
489
-3 V
1.6.
1(20
13-1
2)
EN
301
489
-4 V
2.1.
1(20
13-1
2)
EN
301
489
-7 V
1.3.
1(20
05-1
1)
EN
301
489
-9 V
1.4.
1(20
07-1
1)
EN
301
489
-17
V2.
2.1(
2012
-09)
E
N 3
01 4
89-2
4 V
1.5.
1(20
10-0
9)
EN
301
357
-2 V
1.4.
1(20
08-1
1)
EN
302
291
-2 V
1.1.
1(20
05-0
7)
EN
302
623
V1.
1.1(
2009
-01)
E
N 5
0566
:201
3/A
C:2
014
EN
503
85:2
002
Dire
ctiv
e LV
D 2
006/
/125
/CE
(jusq
u’au
19
avril
201
6) e
t la
dire
ctiv
e 20
14/3
4/U
E (à
par
tir d
u 20
avr
il 20
16)
EN
609
50-1
: 200
6 / A
12: 2
011
EN
609
50-1
: 200
6 / A
2: 2
013
EN
600
65:2
002
/ A12
: 201
1
Dire
ctiv
e éc
ocon
cept
ion
2009
/125
/CE
Reg
ulat
ion
(CE
) No.
127
5/20
08
Reg
ulat
ion
(CE
) No.
642
/200
9 R
egul
atio
n (C
E) N
o. 2
78/2
009
Reg
ulat
ion
(UE
) No.
617
/201
3
Dire
ctiv
e R
oHS
2011
/65/
UE
Ver
. 160
217
Mar
quag
e C
E
Equ
ipem
ent d
e cl
asse
1
S
igna
ture
Jerr
y Sh
en
Nom
en
cara
ctèr
es d
’impr
imer
ie
C
EO
Pos
ition
Taip
ei, T
aiw
an
Lieu
de
déliv
ranc
e
04/0
3/20
16
Dat
e d'
Em
issi
on
2016
Ann
ée o
ù co
mm
ence
l’ap
posi
tion
du
mar
quag
e C
E
(Mar
quag
e U
E d
e co
nfor
mité
)
PI O
-B15
0M
UE
Dec
lara
ción
de
Con
form
idad
N
osot
ros,
los
abaj
o fir
man
tes,
Fa
bric
ante
: A
SU
STe
K C
OM
PU
TER
INC
. D
irecc
ión:
4F
, No.
150
, LI-T
E R
d., P
EIT
OU
, TA
IPE
I 112
, TA
IWA
N
Rep
rese
ntan
te a
utor
izad
o en
Eur
opa:
A
SU
S C
OM
PU
TER
Gm
bH
Dire
cció
n, C
iuda
d:
HA
RK
OR
T S
TR. 2
1-23
, 408
80 R
ATI
NG
EN
País
: G
ER
MA
NY
Dec
lara
mos
el s
igui
ente
pro
duct
o:
Nom
bre
del a
para
to :
Mot
herb
oard
N
ombr
e de
l mod
elo
:
El o
bjet
o de
la d
ecla
raci
ón d
escr
ita a
nter
iorm
ente
es
conf
orm
e co
n la
legi
slac
ión
de a
rmon
izac
ión
pert
inen
te d
e la
Uni
ón:
EM
C D
irect
iva
2004
/108
/CE
(has
ta e
l 19
de a
bril,
201
6) y
Dire
ctiv
a 20
14/3
0/U
E (d
esde
el 2
0 de
abr
il, 2
016)
E
N 5
5022
:201
0+A
C:2
011
EN
610
00-3
-2:2
014
EN
550
13:2
001+
A1:
2003
+A2:
2006
EN
550
24:2
010
EN
610
00-3
-3:2
013
EN
550
20:2
007+
A11
:201
1 R
&TT
E –
Dire
ctiv
a 19
99/5
/CE
E
N 3
00 3
28 V
1.8.
1(20
12-0
6)
EN
300
440
-1 V
1.6.
1(20
10-0
8)
EN
300
440
-2 V
1.4.
1(20
10-0
8)
EN
301
511
V9.
0.2(
2003
-03)
E
N 3
01 9
08-1
V6.
2.1(
2013
-04)
E
N 3
01 9
08-2
V6.
2.1(
2013
-10)
E
N 3
01 9
08-1
3 V
6.2.
1(20
14-0
2)
EN
301
893
V1.
7.1(
2012
-06)
E
N 3
00 3
30-2
V1.
5.1(
2010
-02)
E
N 5
0360
:200
1/A
1:20
12
EN
624
79:2
010
EN
623
11:2
008
EN
301
489
-1 V
1.9.
2(20
11-0
9)
EN
301
489
-3 V
1.6.
1(20
13-1
2)
EN
301
489
-4 V
2.1.
1(20
13-1
2)
EN
301
489
-7 V
1.3.
1(20
05-1
1)
EN
301
489
-9 V
1.4.
1(20
07-1
1)
EN
301
489
-17
V2.
2.1(
2012
-09)
E
N 3
01 4
89-2
4 V
1.5.
1(20
10-0
9)
EN
301
357
-2 V
1.4.
1(20
08-1
1)
EN
302
291
-2 V
1.1.
1(20
05-0
7)
EN
302
623
V1.
1.1(
2009
-01)
E
N 5
0566
:201
3/A
C:2
014
EN
503
85:2
002
LVD
Dire
ctiv
a 20
06/9
5/C
E (h
asta
el 1
9 de
abr
il, 2
016)
y D
irect
iva
2014
/35/
UE
(des
de e
l 20
de a
bril,
201
6)
EN
609
50-1
: 200
6 / A
12: 2
011
EN
609
50-1
: 200
6 / A
2: 2
013
EN
600
65:2
002
/ A12
: 201
1
Dis
eño
Ecol
ógic
o –
Dire
ctiv
a 20
09/1
25/C
E R
egul
atio
n (E
C) N
o. 1
275/
2008
R
egul
atio
n (E
C) N
o. 6
42/2
009
Reg
ulat
ion
(EC
) No.
278
/200
9 R
egul
atio
n (E
U) N
o. 6
17/2
013
RoH
S –
Dire
ctiv
a 20
11/6
5/U
E
Ver
. 160
217
Mar
cado
CE
C
lase
de
equi
po 1
Fi
rma
Je
rry
Shen
N
ombr
e im
pres
o
CEO
P
osic
ión
Taip
ei, T
aiw
an
Luga
r de
emis
ión
04
/03/
2016
Fe
cha
de e
mis
ión
20
16
Año
en
que
se c
oloc
ó
el m
arca
do C
E p
or p
rimer
a ve
z
(mar
cado
CE
de
conf
orm
idad
)
PI O
-B15
0M
A-6 Appendices
top related