please use the following graphic for this question....please use the following passage for questions...
Post on 12-Jul-2020
6 Views
Preview:
TRANSCRIPT
Student Name: ______________________
Teacher: ______________________ Date: ___________
District: Rowan
Assessment: 9_12 T and I IC62 - Drafting - Architr II Test 1
Description: Test 12
Form: 501
Please use the following graphic for this question.
Figure D206.04
1. In Figure D206.04, item 9 is a:
A. Ceiling joist.
B. Ridge Board.
C. Web.
D. Chord.
Please use the following passage for questions 2 through 3:
2. In Figure D206.01, item 4 is a/anFigure D206.01, item 4 is a/an:
A. Anchor Bolt.
B. Floor truss.
C. Girder.
D. Pier.
3. In Figure D206.01, item 7 is a:
A. Floor joist.
B. Floor truss.
C. Girder.
D. Sill.
Please use the following graphic for this question.
Figure D206.03
4. In Figure D206.03, item 6 is the:
A. Sheathing.
B. Trimmer Stud.
C. Sole Plate.
D. Double Top Plate.
5. The most common spacing of floor joists is:
A. 12".
B. 16".
C. 20".
D. 24".
6. The members placed in a diagonal pattern between floor joists are:
A. Bridging.
B. Headers.
C. Studs.
D. Sills.
Please use the following graphic for this question.
Figure D206.03
7. In Figure D206.03, item 2 is a:
A. Cripple Stud.
B. Trimmer Stud.
C. Header.
D. Double Top Plate.
Please use the following graphic for this question.
Figure D206.02 Figure D206.02
8. In Figure D206.02, item 3 is a:
A. Pier.
B. Crawl Space.
C. Floor Joist.
D. Foundation Wall.
Please use the following graphic for questions 9 through 10:
Figure D206.04
9. In Figure D206.04, item 11 is a:
A. Ceiling joist.
B. Ridge Board.
C. Web.
D. Chord.
10. In Figure D206.04, item 12 is:
A. Ceiling joist.
B. Shingles.
C. Sheathing.
D. Chord.
Please use the following graphic for this question.
Figure D206.03
11. In Figure D206.03, item 5 is a:
A. Cripple Stud.
B. Trimmer Stud.
C. Sole Plate.
D. Double Top Plate.
Please use the following graphic for this question.
Figure D206.02 Figure D206.02
12. In Figure D206.02, item 8 is the:
A. Insulation.
B. Sheathing.
C. Sole Plate.
D. Sill.
Please use the following passage for this question.
13. In Figure D206.01, item 14 is a:
A. Joist Hanger.
B. Joist.
C. Ledger Strip.
D. Sill.
14. The shallow space below the floor of a house built above the ground, surrounded by the foundation wall is the:
A. Closet space.
B. Crawl space.
C. Base.
D. Attic space.
15. What is a sill (mud plate)?
A. The horizontal wood member that rests on the foundation wall
B. A wood plate at the top of a stud wall
C. A wood beam located at the top of a door or window
D. A wood framing member at the end of floor joists
Please use the following passage for this question.
16. In Figure D206.01, item 1 is a:
A. Footing.
B. Foundation Wall.
C. Pier.
D. Girder.
Please use the following graphic for this question.
Figure D206.02 Figure D206.02
17. In Figure D206.02, item 13 is a:
A. Pier.
B. Crawl Space.
C. Floor Joist.
D. Foundation Wall.
Please use the following passage for this question.
18. In Figure D206.01, item 11 is a:
A. Floor joist.
B. Double joist.
C. Girder.
D. Sill.
Please use the following graphic for this question.
Figure D206.04
19. In Figure D206.04, item 1 is a:
A. Cripple stud.
B. Trimmer stud.
C. Stud wall.
D. Double stud plate.
Please use the following passage for this question.
20. In Figure D206.01, item 6 is a:
A. Bridging.
B. Blocking.
C. Girder.
D. Sill.
Please use the following graphic for this question.
Figure D206.03
21. In Figure D206.03, item 7 is a:
A. Cripple Stud.
B. Trimmer Stud.
C. Corner Bracing.
D. Double Top Plate.
Please use the following passage for this question.
22. In Figure D206.01, item 10 is a:
A. Pier.
B. Foundation Wall.
C. Footing.
D. Girder.
Please use the following graphic for this question.
Figure D206.02 Figure D206.02
23. In Figure D206.02, item 5 is a:
A. Floor joist.
B. Header.
C. Sole Plate.
D. Sill.
24. A threaded rod inserted in masonry construction to anchor the sill plate to the foundation is a/an:
A. Anchor bolt.
B. Joist hanger.
C. Horizontal joint reinforcement.
D. Welded wire mesh.
Please use the following graphic for this question.
Figure D206.04
25. In Figure D206.04, item 5 is a:
A. Ceiling joist.
B. Rafter.
C. Web.
D. Ridge Board.
Please use the following graphic for this question.
Figure D206.03
26. In Figure D206.03, item 8 is a:
A. Cripple Stud.
B. Trimmer Stud.
C. Sole Plate.
D. Double Top Plate.
Please use the following passage for this question.
27. In Figure D206.01, item 8 is a:
A. Floor joist.
B. Floor truss.
C. Girder.
D. Sill.
Please use the following graphic for this question.
Figure D206.04
28. In Figure D206.04, item 7 is:
A. Cripple Stud.
B. Trimmer Stud.
C. Ceiling Joist.
D. Insulation.
Please use the following graphic for this question.
Figure D206.02 Figure D206.02
29. In Figure D206.02, item 4 is the:
A. Crawl Space.
B. Insulation.
C. Blocking.
D. Floor Joist.
Please use the following graphic for questions 30 through 31:
Figure D206.04
30. In Figure D206.04, item 2 is:
A. Cripple Stud.
B. Sheathing.
C. Sole Plate.
D. Double Top Plate.
31. In Figure D206.04, item 6 is a:
A. Cripple Stud.
B. Trimmer Stud.
C. Sole Plate.
D. Double Top Plate
Please use the following graphic for this question.
Figure D206.02 Figure D206.02
32. In Figure D206.02, item 12 is a:
A. Floor joist.
B. Header.
C. Finished Floor.
D. Sill.
33. A metal strap used to support the ends of joists is a/an:
A. Wall Ties.
B. Anchor Bolt.
C. Ledger Strips.
D. Joist Hanger.
Please use the following graphic for questions 34 through 37:
Figure D206.02 Figure D206.02
34. In Figure D206.02, item 2 is a:
A. Foundation Wall.
B. Footing.
C. Crawl Space.
D. Sill.
35. In Figure D206.02, item 1 is a:
A. Sheathing.
B. Rim joist (Joist header).
C. Drain Tile.
D. LVL.
36. In Figure D206.02, item 11 is the:
A. Insulation.
B. Sheathing.
C. Sole Plate.
D. Sill.
37. In Figure D206.02, item 7 is a:
A. Floor joist.
B. Header.
C. Sole Plate.
D. Sill.
38. Which construction feature is the floor directly attached to?
A. Pier
B. Girder
C. Joists
D. Sill
Please use the following graphic for this question.
Figure D206.03
39. In Figure D206.03, item 4 is a:
A. Cripple Stud.
B. Trimmer Stud.
C. Stud.
D. Double Top Plate.
40. The drawing below illustrates a/an:
A. Anchor bolt.
B. Joist hanger.
C. Horizontal joint reinforcement.
D. Welded wire mesh.
Please use the following graphic for this question.
Figure D206.02 Figure D206.02
41. In Figure D206.02, item 6 is a:
A. Floor joist.
B. Header.
C. Sole Plate.
D. Sill.
42. The built-up wooden beam used to support the ends of the floor joists is a:
A. Pier.
B. Girder.
C. Pilaster.
D. Truss.
Please use the following passage for this question.
43. In Figure D206.01, item 12 is a:
A. Joist Hanger.
B. Joist.
C. Ledger Strip.
D. Sill.
Please use the following graphic for this question.
Figure D206.04
44. In Figure D206.04, item 4 is a:
A. Cripple Stud.
B. Soffit.
C. Soffit Vent.
D. Fascia.
Please use the following graphic for this question.
Figure D206.03
45. In Figure D206.03, item 1 is a:
A. Cripple Stud.
B. Trimmer Stud.
C. Sole Plate.
D. Double Top Plate.
Please use the following graphic for questions 46 through 47:
Figure D206.04
46. In Figure D206.04, item 10 is:
A. Ceiling joist.
B. Ridge Board.
C. Sheathing.
D. Chord.
47. In Figure D206.04, item 8 is a:
A. Ceiling joist.
B. Ridge Board.
C. Web.
D. Rafter.
top related