plunger lift data sheetipsplungerlift.com/featured-downloads/ips_data_sheets.pdf · pipe...
Post on 27-Feb-2018
220 Views
Preview:
TRANSCRIPT
Plunger Lift Data Sheet
TE
CH
NIC
AL
DA
TA
History of WellPrepared by: _________________________________ Date of well information: ____________________________Company: ____________________________________Well name:___________________Location:_____________Phone: ________________________ Fax: ______________________ Email: ________________________________Specify how well is produced now: CONTINUOUS FLOW PUMPING UNIT __________ GAS LIFT________________PLUNGER LIFT _________ INTERMEDIATE FLOW ______________ OTHER _________________________________Specify total liquids per day in bbls.: BRINE____________ OIL _____________ OTHER _________________Specify total actual & current daily gas production: MCF/DAY _________ SPECIFIC GRAVITY _____________Specify maximum daily gas production: MCF/DAY _________Specify the formation pressure: STATIC _________ FLOWING _________Age of the well: _________ YEARSTubing size (ID): _________Specify Tubing Integrity: Broached ______________ DRIFTED – NOT DETERMINED ______________ Specify Tubing Stop: COLLAR STOP _______SEATING SHOE _______TUBING STOP _______OPEN END ________OTHER _____________________Specify ID of stop if shoe or nipple: _______ INCHESStanding valve?: YES ____ NO ____Specify design below seat device or tubing end: GAS ANCHOR ______ MUD ANCHOR ______PERFORATED NIPPLE ______ TUBING FOR ____ FEET NOTHING ______ OTHER ________Specify ID of the tubing master valves: ______ INCHES. (SUBMIT WELLHEAD SKETCH)Choke?: YES ____ NO ____ H2S ____ % CO2 ____ %
Information on Wells with Gas Lift
Type of gas lift mandrels: SIDE POCKET ______ CONVENTIONAL ______Specify number of mandrels: ______ PACKER DEPTH: ______ FEETSpecify injected gas pressure: ______ PSIVolume of gas injected: ______ MCF/DAY
Gathering System Information
Specify gathering system pressure: ____ PSISpecify length of flowline to separation: ____ FEETSpecify ID of flowline: ____ INCHES
Well Pressure Data*
Casing pressure shut in (no flow): ______ PSICasing pressure flowing: ______ PSICasing/tubing differential (shut in): ______ PSICasing/tubing differential (flowing): ______ PSI
*Use tubing pressure high and low if there is a packer in the well.
Pipe Specifications
TE
CH
NIC
AL
DA
TA
PIPE NOMINAL O.D.
PIPE WEIGHT(LBS/FT)
WALL THICK-NESS
PIPE NOMINAL I.D.
PIPE DRIFT I.D.
2 3/8”
2 3/8”
2 3/8”
2 3/8”
2 7/8”
2 7/8”
2 7/8”
2 7/8”
2 7/8”
2 7/8”
3 1/2”
3 1/2”
3 1/2”
3 1/2”
3 1/2”
3 1/2”
4.0
4.6-4.7
5.3
5.8-5.95
6.4-6.5
7.9
8.6-8.7
9.5
10.7
11.0
9.3
10.3
12.7-12.95
15.5
15.8
16.7
2.041
1.995
1.939
1.867
2.441
2.323
2.259
2.195
2.091
2.065
2.992
2.992
2.75
2.602
2.548
2.480
1.947
1.901
1.845
1.773
2.347
2.229
2.165
2.101
1.997
1.971
2.867
2.797
2.625
2.477
2.423
2.399
.167
.190
.218
.254
.217
.276
.308
.340
.392
.405
.254
.289
.375
.449
.476
.510
Standard Nipple I.D.
TE
CH
NIC
AL
DA
TA
TUBING X-NIPPLE RN-NIPPLEXN-NIPPLE R-NIPPLE
1 1/4”
1 1/2”
1 1/2”
1 3/4’
2 1/16”
2 3/8”(1.995”I.D.)
2 3/8”(1.867”I.D.)
2 7/8”(2.441”I.D.)
2 7/8”(2.323”I.D.)
3 1/2”(2.922”I.D.)
3 1/2”(2.750”I.D.)
1.250”
1.500”
1.625”
1.625”
1.625”
1.875”
2.313”
2.750”
1.135”
1.448“
1.536“
1.536“
1.791“
2.205”
2.635”
1.125”
1.375
1.710”
2.188”
2.562”
1.102”
1.250”
1.560”
2.010”
2.329”
top related