pom - chapter 12 lean production 190111
Post on 04-Mar-2015
42 Views
Preview:
TRANSCRIPT
POM/sem2/divB/AA/Ch12 1
1
©The McGraw-Hill Companies, Inc., 2006
2
McGraw-Hill/Irwin
Chapter 12Chapter 12
Lean ProductionLean Production
POM/sem2/divB/AA/Ch12 3
3
• Lean Production Defined
• The Toyota Production System
• Lean Implementation Requirements
• Lean Services
OBJECTIVES
POM/sem2/divB/AA/Ch12 4
4
Lean ProductionLean Production
• Lean Production can be defined as an integrated set of activities designed to achieve high-volume production using minimal inventories (raw materials, work in process, and finished goods)
• Lean Production also involves the elimination of waste in production effort
• Lean Production also involves the timing of production resources (i.e., parts arrive at the next workstation “just in time”)
POM/sem2/divB/AA/Ch12 5
5
Pull SystemPull System
Customers
Sub
Sub
Fab
Fab
Fab
Fab
Vendor
Vendor
Vendor
Vendor
Final Assembly
Here the customer starts the process, pulling an inventory item from Final Assembly…
Here the customer starts the process, pulling an inventory item from Final Assembly…
Then sub-assembly work is pulled forward by that demand…
Then sub-assembly work is pulled forward by that demand…
The process continues throughout the entire production process and supply chain
The process continues throughout the entire production process and supply chain
POM/sem2/divB/AA/Ch12 6
6
Features of Lean ProductionFeatures of Lean Production
• Management philosophy• “Pull” system though the plant
WHAT IT IS
• Employee participation• Industrial engineering/basics• Continuing improvement• Total quality control• Small lot sizes
WHAT IT REQUIRES
• Attacks waste• Exposes problems and bottlenecks• Achieves streamlined production
WHAT IT DOES
• Stable environment
WHAT IT ASSUMES
POM/sem2/divB/AA/Ch12 7
7
The Toyota Production SystemThe Toyota Production System
•Based on two philosophies:
– 1. Elimination of waste
– 2. Respect for people
POM/sem2/divB/AA/Ch12 8
8
Elimination of WasteElimination of Waste
1. Focused factory networks
2. Group technology
3. Quality at the source
4. JIT production
5. Uniform plant loading
6. Kanban production control system
7. Minimized setup times
POM/sem2/divB/AA/Ch12 9
9
Minimizing Waste: Minimizing Waste: Focused Factory Focused Factory
NetworksNetworks
CoordinationSystem Integration
These are small specialized plants that limit the range of products produced (sometimes only one type of product for an entire facility)
These are small specialized plants that limit the range of products produced (sometimes only one type of product for an entire facility)
Some plants in Japan have as few as 30 and as many as 1000 employees
Some plants in Japan have as few as 30 and as many as 1000 employees
POM/sem2/divB/AA/Ch12 10
10
Minimizing Waste: Minimizing Waste: Group TechnologyGroup Technology (Part 1) (Part 1)
• Using Departmental Specialization for plant layout can cause a lot of unnecessary material movement
• Using Departmental Specialization for plant layout can cause a lot of unnecessary material movement
Saw Saw
Lathe PressPress
Grinder
LatheLathe
Saw
Press
Heat Treat
Grinder
Note how the flow lines are going back and forthNote how the flow lines are going back and forth
POM/sem2/divB/AA/Ch12 11
11
Minimizing Waste: Minimizing Waste: Group Technology (Part 2)Group Technology (Part 2)
• Revising by using Group Technology Cells can reduce movement and improve product flow
• Revising by using Group Technology Cells can reduce movement and improve product flow
Press
Lathe
Grinder
Grinder
A
2
BSaw
Heat Treat
LatheSaw Lathe
PressLathe
1
POM/sem2/divB/AA/Ch12 12
12
Minimizing Waste: Minimizing Waste: Uniform Plant Loading (heijunka)Uniform Plant Loading (heijunka)
Not uniform Jan. Units Feb. Units Mar. Units Total
1,200 3,500 4,300 9,000
Uniform Jan. Units Feb. Units Mar. Units Total
3,000 3,000 3,000 9,000
Suppose we operate a production plant that produces a single product. The schedule of production for this product could be accomplished using either of the two plant loading schedules below.
Suppose we operate a production plant that produces a single product. The schedule of production for this product could be accomplished using either of the two plant loading schedules below.
How does the uniform loading help save labor costs?How does the uniform loading help save labor costs?
or
POM/sem2/divB/AA/Ch12 13
13
Minimizing Waste: Inventory Minimizing Waste: Inventory Hides ProblemsHides Problems
Work in
process
queues
(banks)
Change
orders
Engineering design
redundancies
Vendor
delinquencies
Scrap
Design
backlogs
Machine
downtime
Decision
backlogsInspection
backlogs
Paperwork
backlog
Example: By identifying defective items from a vendor early in the production process the downstream work is saved
Example: By identifying defective work by employees upstream, the downstream work is saved
POM/sem2/divB/AA/Ch12 14
14
Minimizing Waste: Kanban Production Minimizing Waste: Kanban Production Control SystemsControl Systems
Storage Part A
Storage Part AMachine
Center Assembly Line
Material Flow
Card (signal) Flow
Withdrawal kanban
Once the Production kanban is received, the Machine Center produces a unit to replace the one taken by the Assembly Line people in the first place
This puts the system back were it was before the item was pulled
The process begins by the Assembly Line people pulling Part A from Storage
Production kanban
POM/sem2/divB/AA/Ch12 15
15
Determining the Number of Determining the Number of Kanbans NeededKanbans Needed
• Setting up a kanban system requires determining the number of kanbans cards (or containers) needed
• Each container represents the minimum production lot size
• An accurate estimate of the lead time required to produce a container is key to determining how many kanbans are required
POM/sem2/divB/AA/Ch12 16
16The Number of Kanban Card The Number of Kanban Card SetsSets
C
SDL
k
)(1
container theof Size
stockSafety timelead during demand Expected
C
SDL
k
)(1
container theof Size
stockSafety timelead during demand Expected
k = Number of kanban card sets (a set is a card)D = Average number of units demanded over some time periodL = lead time to replenish an order (same units of time as demand)S = Safety stock expressed as a percentage of demand during leadtimeC = Container size
POM/sem2/divB/AA/Ch12 17
17
Example of Kanban Card Example of Kanban Card Determination: Problem DataDetermination: Problem Data
• A switch assembly is assembled in batches of 4 units from an “upstream” assembly area and delivered in a special container to a “downstream” control-panel assembly operation
• The control-panel assembly area requires 5 switch assemblies per hour
• The switch assembly area can produce a container of switch assemblies in 2 hours
• Safety stock has been set at 10% of needed inventory
POM/sem2/divB/AA/Ch12 18
18
Example of Kanban Card Example of Kanban Card Determination: CalculationsDetermination: Calculations
3or ,75.24
5(2)(1.1))(1
container theof Size
stockSafety timelead during demand Expected
C
SDL
k
3or ,75.24
5(2)(1.1))(1
container theof Size
stockSafety timelead during demand Expected
C
SDL
k
Always round up!
POM/sem2/divB/AA/Ch12 19
19
Respect for PeopleRespect for People
• Level payrolls
• Cooperative employee unions
• Subcontractor networks
• Bottom-round management style
• Quality circles (Small Group Involvement Activities or SGIA’s)
POM/sem2/divB/AA/Ch12 20
20
Toyota Production System’s Four RulesToyota Production System’s Four Rules
1. All work shall be highly specified as to content, sequence, timing, and outcome
2. Every customer-supplier connection must be direct, and there must be an unambiguous yes-or-no way to send requests and receive responses
3. The pathway for every product and service must be simple and direct
4. Any improvement must be made in accordance with the scientific method, under the guidance of a teacher, at the lowest possible level in the organization
POM/sem2/divB/AA/Ch12 21
21
Lean Implementation Lean Implementation Requirements: Design Flow Requirements: Design Flow
ProcessProcess
• Link operations
• Balance workstation capacities
• Redesign layout for flow
• Emphasize preventive maintenance
• Reduce lot sizes
• Reduce setup/changeover time
POM/sem2/divB/AA/Ch12 22
22
Lean Implementation Lean Implementation Requirements: Total Quality Requirements: Total Quality
ControlControl
• Worker responsibility
• Measure SQC
• Enforce compliance
• Fail-safe methods
• Automatic inspection
POM/sem2/divB/AA/Ch12 23
23
Lean Implementation Lean Implementation Requirements: Stabilize ScheduleRequirements: Stabilize Schedule
• Level schedule
• Underutilize capacity
• Establish freeze windows
POM/sem2/divB/AA/Ch12 24
24
Lean Implementation Lean Implementation Requirements: Kanban-PullRequirements: Kanban-Pull
• Demand pull
• Backflush
• Reduce lot sizes
POM/sem2/divB/AA/Ch12 25
25
Lean Implementation Lean Implementation Requirements: Work with VendorsRequirements: Work with Vendors• Reduce lead times
• Frequent deliveries
• Project usage requirements
• Quality expectations
POM/sem2/divB/AA/Ch12 26
26
Lean Implementation Lean Implementation Requirements: Reduce Inventory Requirements: Reduce Inventory
MoreMore
• Look for other areas
• Stores
• Transit
• Carousels
• Conveyors
POM/sem2/divB/AA/Ch12 27
27
Lean Implementation Requirements: Lean Implementation Requirements: Improve Product DesignImprove Product Design
• Standard product configuration
• Standardize and reduce number of parts
• Process design with product design
• Quality expectations
POM/sem2/divB/AA/Ch12 28
28
Lean Implementation Requirements: Lean Implementation Requirements: Concurrently Solve ProblemsConcurrently Solve Problems
• Root cause • Solve permanently
• Team approach
• Line and specialist responsibility
• Continual education
POM/sem2/divB/AA/Ch12 29
29
Lean Implementation Requirements: Lean Implementation Requirements: Measure PerformanceMeasure Performance
•Emphasize improvement
•Track trends
POM/sem2/divB/AA/Ch12 30
30
Lean in Services (Examples)Lean in Services (Examples)
• Organize Problem-Solving Groups
• Upgrade Housekeeping
• Upgrade Quality
• Clarify Process Flows
• Revise Equipment and Process Technologies
POM/sem2/divB/AA/Ch12 31
31
Lean in Services (Examples)Lean in Services (Examples)
• Level the Facility Load
• Eliminate Unnecessary Activities
• Reorganize Physical Configuration
• Introduce Demand-Pull Scheduling
• Develop Supplier Networks
©The McGraw-Hill Companies, Inc., 2006
32
McGraw-Hill/Irwin
End of End of Chapter 12Chapter 12
top related