portfolio
Post on 07-Mar-2016
213 Views
Preview:
DESCRIPTION
TRANSCRIPT
Kin
g S
ing
Ko
kin
gsk
o@
gm
ail.c
om
City
Co
lleg
e o
f Tec
hn
olo
gy
B.A
rch
De
gre
e
20
10
portfolio.
Selected Works
Professional Work
Academic Work
2010
Shaker Ridge House
Ainslie Tower
Lexington bldg
BKL Museum
Coffee Shop
Barcelona Pavillion
Shaker Ridge House2010 - Residential Project, New York
I have a certain fascination with the
townhouse typology that exist in
many of the older cores of america’s
eastern cities. In this project i am
assigned to design a speculative
townhouse that could incorporate
the existing townhouse sturcture
while updating it to a contemporary
design language.
This townhouse is located right on top
of a cliff which has an amazing view.
Our objective is to bring that great
view into the new addition. Another
objective of ours is to maintain a high
energy effiecency. Solar gain in
winter time become a very important
part of our design.
Initial 3D Google Sketchup Rendering - An initial rendering presented to the owner of the new addition.
Solar gain is maximized as the broad
face of the house faces west. The
energy efficiency of house is kept high
by maintaining a high degree of solid
area on the glass. The new structure will
use Zinc panels and a Prodema panel
rain screen system. These materials,
while possibly having a higher embodied
energy due to fabrication and
transporation requirements than more
local “green” materials, are extremely
durable and will not need to be
replaced and thrown out.
Site map - The building is surrounded by forests.
West Side Rendering - New living room, bathroom and master bedroom will use ceiling-to-!oor curtain wall system.
1st Fl - The new grand vestibute would be transparent on both side
in order to create an amazing indoor view.
2nd Fl
2nd Fl - The staircase in the vestibute will lead to the main music room
which has an outdoor deck.
North Elevation - The addition would be sitting on the new foundation on top of the slope
overlooking the sunset merging into the sullen earth at night time.
West Elevation - Shop drawing with window schedule for material estimating purpose.
Section - Section of the building showing the new foundation wall on the slope and details.
Ainslie Tower
2010 - Mixed use building, New York
I joined this project‘s team in 2009
when they started, right near the end
of the design development stage. I
worked on all parts of the project,
from design, construction document,
shop drawing, millwork design, finish
selection, construction administration,
contractor and client meetings,
consultant coordination. Near the
beginning of construction, almost half
of the project team was laid off,
including the project architect. Work-
ing with the project manager and
design principle, i picked up many of
the responsiblities left vacant by the
personnel losses.
Bird’s eye view - To showcase the back of the building and the rooft garden.
Entrance - To showcase the view from a pedestrian toward the building entrance.
The original space had 6
apartment unit on each floor.
Due to owner’s request, we had to
change the whole floor plan to
create 4 apartment unit on each
floor and meets the new DOB
requirement. We also have to
come up with new curtain wall
detail and window schedule in
order to meet the new building
height.
Typical Floor Plan - The complete approved !oor plan with detail to meet
new F.A.R. requirment.
Elevation - Elevation drawing to show the new adjusted
building height.
Lexington bldg 2010 -Mixed use building- New York
One of the main tasks that I
was charged with was
developing an architecture
for the retail component of
the project. A preliminart
schematic design had been
completed in 2009. Many
features of the original
schematic pakcage were
changed when the project
was revisited. That includes
the plan, elevation, new
metal panel and stucco
wall changes.
Typical Floor Plan - The complete approved !oor plan with detail to meet new F.A.R.
requirment.
Elevation - Elevation drawing to show the new building facade design.
BKL Museum
The new building site is currently located right next to
an existing factory. Our project is to create a modern
art museum which is highly energy efficient. The front
facade is constructed using a dual skin system. The
inner skin consist of a strucal glazed curtain wall with
openable windows. The outer skin is a layer of poly -carbonate with voides. The layering created an
interesting facades of voids and spaces while allow -ing air to penetrate freely to into the building.
During the night, the translucent facade glows. Not
only this allow a passer by a glimpse of the exhibits, it
alos cast interesting reflections on the reflecting water surface.
2009 - Musum Projectmix - Brooklyn, NY
Site Analysis & Sun diagram - To calculate how sun is going
to a!ect the light source for the building interior.
Site Plan - Based on the Sun diagram, I can successfuly
locate the tree to limit the light source into the building.
Floor Plan - Simple "oor plan to show how light distributes
during day time.
I had adpoted a simple site strategy in this
design. I ‘ve allowed visual linkage from
the the visitor’s park towards the main
street. A welcoming landscape void is an
intended contrast along the heavily build
up street. The ground is opened up, letting
people use the ground, penetrating the
site. I had also implemented sun diagram
and summer/winter wind direction into the
site analysis in order be highly energy
efficient.
Section - A section drawing to show how vistiors come from the street.
Elevation - An elevation showing the back side of the building.
Rendering - A simple rendering of the interior column texture.
Ecologically sustainable development diagram(ESD) - A diagram showing how cool air goes in and how hot air goes out.
The interior columns are cladded with bright
orangey panels integrated with lighting and
artifacts display panels. The bright orange
exercise aims to incorporate the principles of
the ecologically sustainable development
(ESD). The proposal encourages low energy
passive heating and cooling strategies in
Coffee Shop
This was my 2nd year site planning
class project. We were asked to design
a coffee shop to create an evolution
in the manner how people interacts to
the building location and prescence,
how they respond to the context. The
coffee shop will evolve in responce to
movement and introduction of new
programatic elements.
Model - A model to understand how the space relate to the enviroment of the building.
Floor Plan - Simple diagram the usage of each spaces.
2006 - Site Planning Class Project
Section
North Elevation
West Elevation
Initial scratch
This is one of the project of my
first 3D rendering class. The render-
ing is done in Autocad 07. The
water ripples were done using a
bump map on the fresnel water
shader in photoshop. The goal of
this project is to recreate real-time
reflection, shade, texture and
lighting effect as close as to the
Barcelona Pavillion done by using
Autocad 3D software.
Barcelona Pavillion
Interior rendering - Key elements are ceiling reflection,
texture on material.
Exterior rendering - Key elements are lighting effect, background, and water ripple effect.
3D rendering - Mies Van Der Rohe
top related