“presence” appealing “it is there”
Post on 09-Jun-2022
4 Views
Preview:
TRANSCRIPT
Actual size
■ Peripheral equipment
Appearance with good design
“Presence” appealing “It is there”
Industry's smallest
class and slimmed (When mounted)
■ KSP standard color indoor type combination table ■ KSP standard color outdoor type combination table
Product model Product name Application
YYT-12DT
YYT-12DT
GD-KSP-SI
GD-KSP-SI GD-PPH
Cable with terminal block (for P type)
KSP (PPH) protective cover
Used for renewal mounting of P type combination box
Guard for preventing damage to combination box
GD-PPH PPH protective cover Guard for preventing damage to manual call point
Sound device
Stru
ctu
re
Ma
nu
al ca
ll po
int
P-1
typ
e m
an
ua
l ca
ll po
int (p
ola
rity)
P-1
typ
e m
an
ua
l ca
ll po
int (p
ola
rity)
KSR-10HSIY (JE) KSP-10HSIY (JE) KSB-00RSDW (WHT)
KSB-00USDKSU-10HSIY (JE) KSP-10HSIY (JE)
Vertical type
Su
rface
mo
un
t
Ye
sY
es
Flu
sh m
ou
nt
Set Plate Box
Product modelSpecification
Sound device
Stru
ctu
re
KSR-10HSIWY (JE) KSP-10HSIWY (JE) KSB-00RSDW (WHT)
KSB-00USDKSU-10HSIWY (JE) KSP-10HSIWY (JE)
Vertical type
Su
rface
mo
un
t
Ye
sY
es
Flu
sh m
ou
nt
KSR-10WSIY (JE) KSP-10HSIY (JE) KSB-00RSDW (WHT)Ho
rizon
tal ty
pe
Su
rface
mo
un
t
Ye
sY
es
Flu
sh m
ou
nt
KSR-10WSIWY (JE) KSP-10HSIWY (JE) KSB-00RSDW (WHT)
KSB-00USDKSU-10WSIWY (JE) KSP-10HSIWY (JE)
Ho
rizon
tal ty
pe
Su
rface
mo
un
t
Ye
sY
es
Flu
sh m
ou
nt
Set Plate Box
Product modelSpecification
Ma
nu
al ca
ll po
int
KSU-10WSIY (JE) KSP-10HSIY (JE) KSB-00USD
● The products specifications and appearances listed in this catalog are subject to change without prior notice for quality improvement.
● The products colors listed in this catalog may differ slightly between printed and actual ones.
General Catalog for Manual Call Point (Flat Type) • Combination Box
Copyright © HOCHIKI Corporation. All rights reserved.
2 - 1902201910020D060-V
The contents of this catalog are as of June 2020.Unauthorized duplication, reproduction, or quotation of the contents of this catalog is prohibited.
The FLAT is a registered trademark of HOCHIKI Corporation
HOCHIKI ASIA PACIFIC PTE. LTD
82 Ubi Ave 4, #06-02 Edward Boustead Centre,
Singapore 408832
TEL: 65-6841-9728
Fax: 65-6841-9781
URL: www.hochikiasiapacific.com
HEAD OFFICE
10-43 Kamiosaki 2-Chome.
Shinagawa-Ku, Tokyo 141-8660 Japan
TEL: 81-(3)-3444-4111
Fax: 81-(3)-3444-4118
URL: www.hochiki.co.jp
1 6
■ Appearance with good design
■ Two types, “Flat mounting” and “Front mounting”, are available.
It is compact, but with bright and large light-emitting area, it can be
recognized as "It is there" from everywhere. It provides at the same
time the high creativity by the device housing with unprecedented
transparent feeling, and it matches with good designed buildings
and facilities.
The device was slimmed down by unifying the manual call point and indicator lamp. The protrusion from the front surface is only 1 mm
(with flat mounting).By reducing the thickness, the risks of breakage due to collisions have been reduced.
■ Compatible with all installation methods
φ121 mmφ115.8 mm Protrusion: 17 mm
▼ ▼▼▼▼▼ ▼▼
Protrusion:1mm
430㎜
22
0㎜
430 ㎜
(The photo is exposed)
Combination Box Built-in withP-1 Type Manual Call Point
(Flat Type) (with Sound Device)
Equipped with Automatic Test Function Bell(with Diode)
■ Combination box built-in with P-1 type manual call point (flat type) (with bell) lineup
* 1: Depth is measured from the mounting wall surface.* 2: Please contact us if you are unsure about connected fire alarm control panel.* 3: Peripheral devices (separate order)
Product model
External dimensions (mm)
Type
Operating voltage
Ma
nu
al ca
ll po
int
Ind
icato
rla
mp
Compatible with firealarm control type
KSU-10HSIY (JE)
KSR-10HSIY (JE)
KSU-10HSIWY (JE)
KSR-10HSIWY (JE)
DC / AC24V
15mA
Model number
Current consumption
Rated voltage
Current consumptionZone sound device
Rated voltage
Acclaimed sound No.15-2
DC24V
Manual call point/Indicator lamp
Co
lor Combination box
Red
Munsell value N9.0 analogous color
8mA
Flush mount: (W) 218 x (H) 428 x (D) 13.8 *1 Surface mount: (W) 220 x (H) 430 x (D) 78.8 *1
Track monitoringfunction
Weight
P-1 type fire alarm control panel (RPR, RPS, RPQ, RPV series, etc.) *2
4.6 kg
Material Manual call point/Indicator lamp: Self-extinguishing resin Combination box: Steel plate (plate thickness 1.2 mm baking finish)
Accessories
Operating temperature range
Installation manual, terminal block set (1 set), Sems screw M4 x 10 (4 pieces), tapping screw 4 x 20 (2 pieces)
Cable with terminal block *3 YYT-12DT
Protective cover *3 GD-KSP-SI
With automatic test function (bell with diode)
Sound pressure 90dB or more (1m in front of the tone hole)
Indoor type
24V 0.2AOutdoor type
24V 0.2A
P-1 type manual call point (Flat type) (Polarity • Bell)
PolarPolarity
-10 to 50 °C -20 to 60 °C
Mounting adapter Surface box
Cover packing
Mounting plate
Front-side mounting(fire hydrant newly installed)
Renewal replacement and
wall mounting Surface mounting (wall surface)Flat mounting
(fire hydrant newly installed)
By combining with various mounting parts, it is possible to select most appropriate installation method according to your environment from flat mounting, front-side mounting, renewal replacement, wall mounting, and surface mounting.
Mounting adapter
Transparent, elegant design
This product is certified as "Color Universal".
Mounting surface Mounting surfaceMounting surfaceMounting surface
Flat mounting Front-side mounting
5 2
■ The fire alarm position is securely recognized in all directions day and night with soft light.
The indicator lamp is visible from all directions, while the protruding of flat mounting is designed as only 1 mm (front-side mounting: 17 mm).
■ Other features
Product information can be confirmed by opening the device nameplate.
■ Compliant with Fire Service Act Enforced Regulations Article 24, Item 1, Paragraph 8-2, No. 2
Day Night
■ Front-side mounting (view from approximately 15° against from the wall)
■ Flat mounting (view from approximately 15 ° against from the wall)
"The indicator lamp should be in red light, and should be easily recognized from the angle of 15° and 10 m distance."
*This is Japanese Regulation.
Day Night
10 m 10 m
15 °15 °
View from above
Flat type fire alarm control panelWall
Red color can be easily recognized in this range
Selection can be made according to the installation environment such as indoor and outdoor types.
■ P-1 type manual call point (Flat type) product lineup
* 1: Please contact us if any other fire alarm control panel is connected.
■ Quick reference table for combination of manual call point (Flat type)
Product model
Mountingmethod
Flat mounting(Fire hydrant)
Front-side mounting(Wall surface)
Front-side mounting①(Fire hydrant)
(New installation)(Front mounting)
Front-side mounting②(Fire hydrant)
(Renewal)
(Front mounting)
Surface mounting③(Wall surface)
(Renewal)
(Front mounting)
PPH
Mountingadapter
PPH
Protectivecover
PPE
Protectivecover
PPH
Rainproof
cover
Surface
box
PPH
Mountingadapter
packing
PPH
Outdoor
surface
box
P-1
type
P-2
type
PPH-1
PPH-1W
PPH-2
PPH-2W
○
○
○
○
○
○
○▲ ▲
○
○
For
outdoor
▲For
outdoor
▲For
outdoor
▲For
outdoor
▲For
outdoor
▲For
outdoor
For
indoor
※Attach to
the back of
the flat set
Use
depending
on the
necessity
Use
depending
on the
necessity
Use
depending
on the
necessity
* Attach to
the back of
the door
* Attach to
the back of
the door
PPE-B YYF-E GD-PPH GD-PPEYYI-PPH-B YYI-PPH-CYYI-PPH-DYYI-PPH-A
Manual call pointPPH
Flat set
F I R E A L A R M
PUSH
F I R E A L A R M
PUSH
F I R E A L A R M
PUSH
F I R E A L A R M
PUSH
Product model
Compatible with fire alarm control type
Weight
Material
Color
Operating temperature range
Accessories
Operating voltageM
an
ua
l call p
oin
tIn
dica
tor
lam
p
Rated voltage
Current consumption
Polarity
-10 to 50 °C -20 to 70 °C -10 to 50 °C -20 to 70 °C
Indoor type
24V 0.2AOutdoor type
24V 0.2A
P-1 type manual call point (polar)
Indoor type
24V 0.2AOutdoor type
24V 0.2A
P-2 type manual call point
External dimensions φ121 mm (including indicator lamp)
Polar -
DC / AC24V
15mA
195 g
Self-extinguishing resin
Red
P-2 type fire alarm control panel(RPP-EDW)
P-1 type fire alarm control panel(RPR, RPS, RPQ, RPV series, etc.) * 1
Installation manual,Sems screw M4 × 12 (2 pieces)
PPH-1 (JE) PPH-1W (JE) PPH-2 (JE) PPH-2W (JE)
Type
Type
33 4
火災報知機Push hard
fi r e a l a r mPush hard
A
B
■ Fix the surface box to the outlet box with the M4 sems screw supplied with the surface box.■ Fix the PPH mounting adapter to the surface box with the M4 sems screws.■ Mount the manual call point (Flat type) to the
mounting adapter.C
Mounting method
Mounting method
■ Fix the manual call point on the mounting plate with the M4 sems screw attached.■ Mount the PPH cover packing by attaching the PPH cover packing claws to the PPH mounting plate.
A
B
fi r e a l a r mPush hard
(Front side) (Back side)
C
D
A
B
PUSH
F I R E A L A R M
PPH cover packing (PPH flat set)
PPH mounting plate (PPH flat set)
Washer (PPH flat set accessory)
Truss screw M4 x 16 (PPH flat set accessory)
Manual call point (Flat type) (Front cover)
Manual call point (Flat type) (Main unit)
Claw
Sems screw M4 × 12(Manual call point accessory)
▲
▲▲
▲
▲▲
▲
▲
Manual call point (Flat type) (Front cover)
Manual call point (Flat type) (Main unit)
PPH mounting adapterYYI-PPH-B
Exposure box * 1PPE-B
Sems screw M4 × 16(Surface box accessory)
Sems screw M4 × 12(Prepared separately)
▲
▲
▲
▲
▲
▲Sems screw M4 × 12(Manual call point accessory)
▲
PUSH
F I R E A L A R M
Surface mounting (Indoor type)
Manual call point (Flat type) mounting
Mounting image
Mounting image
A
A
B
C
F I R E A L A R M
Sems screw M3 × 12
Sems screw M4 × 12(Manual call point accessory)
Manual call point (Flat type) (Front cover)
Manual call point (Flat type) (Main unit)▲
▲
▲
▲
Plate
▲
Front-side mounting ① Mounting image
Manual call point (Flat type) (Front cover)
PPH mounting adapter
YYI-PPH-B
Manual call point (Flat type) (Main unit)
Φ95 round hole
Sems screw M4 x 12 (or more)
(Prepared separately)
▲
▲
▲
▲
■ Fix the mounting adapter to the fire hydrant or outlet box with M4 sems screw.■ Open the plate, remove the M3 sems screw, and turn the front cover counterclockwise to remove it from the parts board.■ Fix the manual call point to a fire hydrant with the M4 sems screw attached.■ Attach the front cover in the reverse order of ■.
A
B
B
Mounting method
Sems screw M3 × 12
▲
Sems screw M4 × 12
(Manual call point accessory)
▲
C
D
B
Plate
▲
Front-side mounting (When renewal) ②③ Mounting image
Mounting methodA
B
�
■ Open the plate, remove the M3 sems screw, and turn the front cover counterclockwise to remove it from the parts board.■ Fix the manual call point (Flat type) to the fire hydrant with the M4 sems screw attached.■ Attach the front cover in the reverse order of ■.C
A
A
B
F I R E A L A R M
PUSH
F I R E A L A R M
F I R E A L A R M
F I R E A L A R M
PUSH
PUSH
PUSH
PUSH
F I R E A L A R M
PUSH
top related