primavera p6 installation procedure

1. Open p6 folder which is in DVD and double click on Setup.exe as shown in the image abvoe image

2. Once you double click on Setup.exe file the above dialog box will be appeared3. Click on Next in the above dialog box

4. Once you get the above dialog box Please enter the product code as follows P roduct code : EC – C01 then the following dialog box will be appeared

5. Once you enter the product code it will appear as above .6. Click on Next

7. Select I accept the tems of the license agreement and click on Next

8. Once the above dialog box will appear just select the Primaver stand-alone in the above mentioned dialog box

9. After selecting the Primaver stand-alone click on Next.

10. Click on Next when this dialog box appears.

11. Click on Next when this dialog box appears.

12. Click on Next when this dialog box appears.

13. When this dialog box appears Click on Browse

14. Once you click on Browse the Selct license file dialog box will appears 15. Double cilck on license folder License folder you will get the other dialog box like above.16. Select License.txt file it will look like in the dialog box as shown in the left.17. Click on Open.

18. Once you select the License.txt the above dialog box will appear.19. Click on Next

20. click on Install to install P6 it will take some time to Installation.

21. Once the Installation is completed. One dialog box will appear as follows

22. Click on Next23. Then click on Finish. 24. After completing the above step another dialog box will appear as follows

PMDB

Back Next Finish

PMDB

Back Finish

25. Once this dialog box will appear do the same steps from 21 to 24 (Previous slide No. 16)

26. Click on Next27. Then click on Finish.

MMDB

Back Next Finish

MMDB

Back Finish

28. Once the above procedure is completed do the following.29. Goto Start --- All Programs ---- Primavera ----- Project Management30. It will ask you Login id and Pass word Login : admin Pass Word : admin (Small Letters)Enjoy working with Primavera 6.0.