pro dj link setup guide · ieee802.11g etc. depending on the signal conditions in the usage...
Post on 17-Jun-2020
1 Views
Preview:
TRANSCRIPT
PRO DJ LINKSetup Guide
En2
ContentsHow to read this manualThe instructions in this manual use the indications below.! Button names displayed on the main unit of the product, and the screen names
on the software are enclosed in [ ]. (Example: [LINK] button, [UTILITY] screen)! The version of rekordbox for mobile devices is referred to as “rekordbox (iOS/
Android) ”.! The version of rekordbox for Mac/Windows is referred to as “rekordbox (Mac/
Windows)”. “rekordbox” is used to indicate the versions of rekordbox and rekord-box (iOS/Android) simultaneously, as well as when referring to rekordbox func-tions directly.
Before startPurpose of this guide .......................................................................................................3General description of PRO DJ LINK ..............................................................................3To make connections .......................................................................................................4About trademarks and registered trademarks ..............................................................4
Connecting DJ player (Group A) and DJ mixer (Group A)Connecting rekordbox by wireless LAN ..........................................................................5Connecting rekordbox via cable/Setting the mobile device (iOS/Android) or storage device (USB/SD) .............................................................................................8
Connecting DJ player (Group A) and DJ mixer (Group B)Connecting rekordbox by wireless LAN ........................................................................11Connecting rekordbox via cable/Setting the mobile device (iOS/Android) or storage device (USB/SD) ...........................................................................................14
Connecting DJ player (Group A) and other DJ mixersConnecting rekordbox by wireless LAN ........................................................................17Connecting rekordbox via cable/Setting the mobile device (iOS/Android) or storage device (USB/SD) ...........................................................................................19
Connecting DJ player (Group B) and DJ mixer (Group A)Connecting rekordbox via cable/Setting the storage device (USB/SD) ....................21
Connecting DJ player (Group B) and DJ mixer (Group B)Connecting rekordbox via cable/Setting the storage device (USB/SD) ....................24
Connecting DJ player (Group B) and other DJ mixersConnecting rekordbox via cable/Setting the storage device (USB/SD) ....................27
En 3
Before start
Before startPurpose of this guideThis guide describes the procedures for making the connections required to use the PRO DJ LINK functions.
General description of PRO DJ LINKTo enable various PRO DJ LINK functions proposed by Pioneer, use wireless LAN or LAN cable 1 to connect a mobile device (iOS/Android) or a computer (Mac/Windows) on which DJ player, DJ mixer or rekordbox supporting PRO DJ LINK are installed.The main functions that can be achieved by PRO DJ LINK are as follows:! Music files in various media such as smartphones and tablets 23, computer 3, USB device, or SD memory card 4 etc., are transmitted by wireless methods 2 or with
LAN/USB cable, and these files can be shared/played on a maximum of 4 players 5.! Music of a maximum of 4 DJ players can be played by automatically adjusting the tempo and beat, by installing the BEAT SYNC2 function.! The channel status (on air status and channel number) can be checked instantaneously.! The quantize function makes it possible to apply beat effects in tempo with the music.Besides this, functions can be enhanced further by using a combination of DJ player and DJ mixer supporting PRO DJ LINK. For details, see the respective operating instructions. 1 Use a LAN cable of CAT5e or higher.2 Supports only CDJ-2000NXS/CDJ-900NXS/XDJ-1000.3 rekordbox must be installed.4 Only CDJ-2000NXS/CDJ-2000 are supported.5 Music files in CD/DVD cannot be shared.
About SD memory cardsIn the subsequent explanations, SD memory card and USB device are collectively described as “Storage device (USB/SD)”. SD memory card can only be used in the support-ing equipment.
Type of equipment supporting PRO DJ LINK made by PioneerThis information is as of YY 2014 MM 12 DD 15. For latest information, see the Pioneer support DJ site below.http://pioneerdj.com/support/
DJ players supporting PRO DJ LINKCDJ-2000NXS/CDJ-2000/CDJ-900NXS/CDJ-900/XDJ-1000
DJ mixers supporting PRO DJ LINKDJM-2000NXS/DJM-2000/DJM-900NXS/DJM-900SRT
To make maximum use of the PRO DJ LINK functionPRO DJ LINK function can be utilized to a maximum using music files analyzed by rekordbox.Mobile device (iOS/Android) or computer (Mac/Windows) on which the rekordbox is installed can be directly connected to the DJ player or music files analyzed by rekordbox can be used by transferring to a storage device (USB/SD).rekordbox can be downloaded free of charge from the following website:http://rekordbox.com/
Recommended rekordbox versionsrekordbox (iOS/Android) Ver.1.2.0 or greater, rekordbox (Mac/Windows) Ver.3.1.0 or greater! For detailed connection and operation method of a mobile device (iOS/Android) or a computer on which rekordbox is installed, see the user’s manual of rekordbox (iOS/
Android) or the user’s manual of rekordbox (Mac/Windows).
Mobile device (iOS/Android) that can be connected to each type of equipment with USB cableFor mobile devices (iOS/Android) that can be connected by USB cable, see the operating instructions of each type of equipment.
En4
To make connectionsThe connection procedure for using the PRO DJ LINK function differs according to the combination of devices you are using.This manual describes the connection procedures for different combinations of PRO DJ LINK-compatible Pioneer DJ players and DJ mixers.First check the combination of devices you are using on the table below, then connect following the description of the relevant page.
! Ex.: If you are using a CDJ-2000NXS and a DJM-2000NXS, you should follow procedure 1 . Proceed to page 1 .
DJ player (Group A)CDJ-2000NXS/CDJ-900NXS/XDJ-1000
DJ player (Group B)CDJ-2000/CDJ-900
DJ mixer (Group A)DJM-2000NXS/DJM-2000
DJ mixer (Group B)DJM-900NXS/DJM-900SRT
DJ mixer (Group A) DJ mixer (Group B) Other DJ mixers
DJ player (Group A) 1 2 3
DJ player (Group B) 4 5 6
Connecting by wireless LAN! Use the wireless router (available in the market) and access point (available in the market) which can obtain a sufficient communication speed such as IEEE802.11n,
IEEE802.11g etc. Depending on the signal conditions in the usage environment or the wireless router and access point, PRO DJ LINK connections may not operate properly.
! For connection method of wireless LAN, see the operating instructions of the computer or wireless LAN equipment used.
About trademarks and registered trademarks! Pioneer and rekordbox are registered trademarks of the Pioneer Corporation.! Windows is a registered trademark of Microsoft Corporation in the United States and other countries.! Mac is a trademark of Apple Inc., registered in the U.S. and other countries.! Android™ is a trademark of Google Inc.! iOS is a trademark on which Cisco holds the trademark right in the US and certain other countries.! The names of companies and products mentioned herein are the trademarks of their respective owners.
En 5
Connecting
DJ
player (G
roup A
) and D
J m
ixer (Group
A)
1 Connecting DJ player (Group A) and DJ mixer (Group A)
1-1 Connecting rekordbox by wireless LAN
Equipment used! CDJ-2000NXS/CDJ-900NXS/XDJ-1000 (1 to 4)! Wireless router with internal switching hub or access point! Mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed! DJM-2000NXS or DJM-2000! Audio cable! LAN cables (one for each DJ player + one more)
Connections diagram (when connecting two DJ players)
CDJ-2000NXS DJM-2000NXS CDJ-2000NXS
Audio cable
LAN cable (wired)
Wireless
OVER
POWER
CD/DIGITAL PHONO USB 1/2
TRIM
CHSELECT
EFFECT SELECT
EFFECT FREQUENCY
1 2 3 4
OFFON
MASTER
LINK
HEADPHONES
MIC
INST FX
MIDI
CURVE SETTING
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
10
9
78
6
5
4
3
2
1
0
BALANCE
LOW
TIME
LIVESAMPLER
WAKE UP
LEVEL/DEPTH
1/8 1/4 1/2 3/4 1/1 2/1 4/1
MIN MAX
MIN MAX
AUTO/TAP
TAP
ON/OFF
ON/OFF
CUE
CUE
CUE
A B
DELAY
ECHO FILTER
GATEROLL TRANS
REVERB
MULTI TAPDELAY
PHASERSLIPROLL
SEND/RETURN
REVROLL
CUE
CUE
NOISE JET
ZIP HPF
CRUSH LPF
MONO
ON/OFF
CH EQ
EQ
CROSS FADER
CH FADER
ISOLATOR
START/STOP
SNAPSHOT
UTILITY
BOOTH MONITOR
STEREO
MONO SPLIT STEREO
L R
DJM-2000 nexus
- 0
L R
FILTER
PARAMETERMIN MAX
OVER
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
ISOEQ/
EQ
LOW
MID
HI
+9
+6
- 0
0
LOW
MIN MAX
CUE MASTER
PHONES
LEVEL
MIXING
HI
-26/
+6-26/
+6-26/
-12 +12
OFF ON OVERTALK
PROFESSIONAL MIXER
10
9
78
6
5
4
3
2
1
0
A BTHRU A BTHRU
CROSS FADER ASSIGN
A BTHRU A BTHRU
CROSS FADER ASSIGN
MICLEVEL
0-
CUE
FILTER
MIN MAX
CUE
FILTER
MIN MAX
CUE
FILTER
MIN MAX
-12 +12
CD/DIGITAL LINE USB 3/4
OVER
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
ISOEQ/
ISOEQ/
TRIM
+9
HI
+6-26/
MID
+6-26/
LOW
+6-26/
CD/DIGITAL LINE USB 5/6
TRIM
+9
HI
+6-26/
MID
+6-26/
LOW
+6-26/
OVER
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
ISOEQ/
CD/DIGITAL PHONO USB 7/8
TRIM
+9
HI
+6-26/
MID
+6-26/
LOW
+6-26/
OVER
MIC A B M
MID
MIN MAX
HI
MIN MAX
MIX
REMIX
SYNC MASTER
Connection procedure
� Creating the [PLAYER No.] setting
1 Remove the LAN cable from the equipment and unplug the mobile device (iOS/Android) and storage device (USB/SD) from the DJ player.! When mobile device (iOS/Android) or storage device (USB/SD) are set, and when LINK connection is established, [PLAYER No.] settings cannot be changed.
2 Turn on the power supply of the DJ player and DJ mixer.
3 Open the [UTILITY] screen of DJ player, and set [PLAYER No.] to [AUTO].! For the display method of [UTILITY] screen, see the operating instructions of each DJ player.
[PLAYER No.] setting screen
! Set the second DJ player on in the same way.! [PLAYER No.] is set to [AUTO] upon shipment from the factory.
En6
� Connecting the cables (LAN cable and audio cables)
1 Connect the wireless router and DJ mixer with LAN cable.
2 Connect the LAN cable and audio cables.Connect in such a way that the DJ player’s [PLAYER No.], the channel number of the DJ mixer’s LAN cable insertion port and the channel number of the terminals to which the audio cables are connected are all the same number.Connect the wireless router/access points to [COMPUTER1] or [COMPUTER2] of DJ mixer.Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the wireless router is connected to [COMPUTER1]
SIGNAL GND
CD
CDL
R
L
R
PHONOCDLINE
CONTROLOUT IN
TRS
R LR L
R
LR L(MONO) R L(MONO)
COMPUTER 1
COMPUTER 2
LINK
CH 3 CH 1
CH 4 CH 2
CH2CH3CH4 CH1DIGITAL
SIGNAL GND
CD
1GND
-6dB -3dB 0dB
2HOT3COLD
CDL
R
PHONO
POWER
AC IN
OFFON
MASTERATT.
DIGITAL CD DIGITAL
L
R
CDLINE
CONTROLCD DIGITAL
CH3CH4
MASTER1 MASTER2 REC OUT BOOTH SEND RETURN
DIGITAL
CH1CH2
USBMIDI OUT
RR
CONTROL
O)
COMPUTER 1
COMPUTER 2
LINK
CH 3 CH 1
CH 4 CH 2
CD DIGITAL
POWERCONTROL
POWERCONTROL
DJM-2000NXS CDJ-2000NXSCDJ-2000NXS
Checking the connections
� Checking the DJ player’s link established by LAN connection
Check that the player number indicated on the DJ player’s screen is lit in white.Cannot connect to LINKConnecting to LINK
! In case the player No. lights up gray, LINK connection is not established. When there is a DJ player that is lighted up in gray, redo the connection procedure once again.! Similarly, check the other DJ players.
� Checking that the LAN cable and audio cables are synchronized
Load a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly.Check that the player number displayed on the DJ player’s screen is the same as the channel number that lights on the DJ mixer’s channel level indicator.If it does not match, the connection is considered to be incorrect. Redo the connection procedure once again.
TRIM
OVER
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
ISOEQ/
LOW
MID
HI
+9
+6-26/
+6-26/
OVER
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
ISOEQ/
TRIM
+9
HI
+6-26/
MID
+6-26/
LOW
DJM-2000NXSCDJ-2000NXS
! Similarly, check the other DJ players.
En 7
Connecting
DJ
player (G
roup A
) and D
J m
ixer (Group
A)
� Checking the device(s) connected by wireless connection
1 Connect the computer or mobile device (iOS/Android) to wireless router or access points with wireless LAN.
2 Press the [rekordbox] button.
DISC
SD
USB
LINK
rekordbox BROWSE TAG LIST INFO MENU
BACKTAG TRACK / REMOVE
QUANTIZE TIME MODE
AUTO CUE
LINK INFO UTILITY
3 Tap the [LOAD] icon, or click the [LINK] button to establish the link connection.The devices that have been recognized are indicated on the DJ player’s screen.
rekordbox (iOS/Android) rekordbox (Mac/Windows)
4 Press the DJ player’s rotary selector to authorize the connection.The files, folders and lists loaded into the respective devices are displayed on the DJ player’s screen.
Ex.: When connecting a mobile device (iOS/Android) and a computer (Mac/Windows)
The connection completed screen appears.
rekordbox (iOS/Android) rekordbox (Mac/Windows)
This completes checking the connections.
En8
1-2 Connecting rekordbox via cable/Setting the mobile device (iOS/Android) or storage device (USB/SD)
Equipment used! CDJ-2000NXS/CDJ-900NXS/XDJ-1000 (1 to 4)! USB cable for connecting mobile device (Use the included iPod cable to connect the iPod to the CDJ-2000NXS.)! Mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed! Storage device (USB/SD) on which the music files analyzed by rekordbox are stored.! DJM-2000NXS or DJM-2000! Audio cable! LAN cables (one for each DJ player + one more)
Connections diagram (when connecting two DJ players)
OVER
POWER
CD/DIGITAL PHONO USB 1/2
TRIM
CHSELECT
EFFECT SELECT
EFFECT FREQUENCY
1 2 3 4
OFFON
MASTER
LINK
HEADPHONES
MIC
INST FX
MIDI
CURVE SETTING
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
10
9
78
6
5
4
3
2
1
0
BALANCE
LOW
TIME
LIVESAMPLER
WAKE UP
LEVEL/DEPTH
1/8 1/4 1/2 3/4 1/1 2/1 4/1
MIN MAX
MIN MAX
AUTO/TAP
TAP
ON/OFF
ON/OFF
CUE
CUE
CUE
A B
DELAY
ECHO FILTER
GATEROLL TRANS
REVERB
MULTI TAPDELAY
PHASERSLIPROLL
SEND/RETURN
REVROLL
CUE
CUE
NOISE JET
ZIP HPF
CRUSH LPF
MONO
ON/OFF
CH EQ
EQ
CROSS FADER
CH FADER
ISOLATOR
START/STOP
SNAPSHOT
UTILITY
BOOTH MONITOR
STEREO
MONO SPLIT STEREO
L R
DJM-2000 nexus
- 0
L R
FILTER
PARAMETERMIN MAX
OVER
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
ISOEQ/
EQ
LOW
MID
HI
+9
+6
- 0
0
LOW
MIN MAX
CUE MASTER
PHONES
LEVEL
MIXING
HI
-26/
+6-26/
+6-26/
-12 +12
OFF ON OVERTALK
PROFESSIONAL MIXER
10
9
78
6
5
4
3
2
1
0
A BTHRU A BTHRU
CROSS FADER ASSIGN
A BTHRU A BTHRU
CROSS FADER ASSIGN
MICLEVEL
0-
CUE
FILTER
MIN MAX
CUE
FILTER
MIN MAX
CUE
FILTER
MIN MAX
-12 +12
CD/DIGITAL LINE USB 3/4
OVER
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
ISOEQ/
ISOEQ/
TRIM
+9
HI
+6-26/
MID
+6-26/
LOW
+6-26/
CD/DIGITAL LINE USB 5/6
TRIM
+9
HI
+6-26/
MID
+6-26/
LOW
+6-26/
OVER
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
ISOEQ/
CD/DIGITAL PHONO USB 7/8
TRIM
+9
HI
+6-26/
MID
+6-26/
LOW
+6-26/
OVER
MIC A B M
MID
MIN MAX
HI
MIN MAX
MIX
REMIX
SYNC MASTER
DJM-2000NXS CDJ-2000NXSCDJ-2000NXS
Audio cable
LAN cable (wired)
USB connections
Connection procedure
� Creating the [PLAYER No.] setting
1 Remove the LAN cable from the equipment and unplug the mobile device (iOS/Android) and storage device (USB/SD) from the DJ player.! When mobile device (iOS/Android) or storage device (USB/SD) are set, and when LINK connection is established, [PLAYER No.] settings cannot be changed.
2 Turn on the power supply of the DJ player and DJ mixer.
3 Open the [UTILITY] screen of DJ player, and set [PLAYER No.] to [AUTO].! For the display method of [UTILITY] screen, see the operating instructions of each DJ player.
[PLAYER No.] setting screen
! Set the second DJ player on in the same way.! [PLAYER No.] is set to [AUTO] upon shipment from the factory.
En 9
Connecting
DJ
player (G
roup A
) and D
J m
ixer (Group
A)
� Connecting the cables (LAN cable and audio cables)
Connect the LAN cable and audio cables.Connect in such a way that the DJ player’s [PLAYER No.], the channel number of the DJ mixer’s LAN cable insertion port and the channel number of the terminals to which the audio cables are connected are all the same number.Connect computer to [COMPUTER1] or [COMPUTER2] of DJ mixer.Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the computer (Mac/Windows) is connected to [COMPUTER1]
SIGNAL GND
CD
CDL
R
L
R
PHONOCDLINE
CONTROLOUT IN
TRS
R LR L
R
LR L(MONO) R L(MONO)
COMPUTER 1
COMPUTER 2
LINK
CH 3 CH 1
CH 4 CH 2
CH2CH3CH4 CH1DIGITAL
SIGNAL GND
CD
1GND
-6dB -3dB 0dB
2HOT3COLD
CDL
R
PHONO
POWER
AC IN
OFFON
MASTERATT.
DIGITAL CD DIGITAL
L
R
CDLINE
CONTROLCD DIGITAL
CH3CH4
MASTER1 MASTER2 REC OUT BOOTH SEND RETURN
DIGITAL
CH1CH2
USBMIDI OUT
RR
CONTROL
O)
COMPUTER 1
COMPUTER 2
LINK
CH 3 CH 1
CH 4 CH 2
CD DIGITAL
POWERCONTROL
POWERCONTROL
DJM-2000NXS CDJ-2000NXSCDJ-2000NXS
Checking the connections
� Checking the DJ player’s link established by LAN connection
Check that the player number indicated on the DJ player’s screen is lit in white.Cannot connect to LINKConnecting to LINK
! In case the player No. lights up gray, LINK connection is not established. When there is a DJ player that is lighted up in gray, redo the connection procedure once again.! Similarly, check the other DJ players.
� Checking that the LAN cable and audio cables are synchronized
Load a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly.Check that the player number displayed on the DJ player’s screen is the same as the channel number that lights on the DJ mixer’s channel level indicator.If it does not match, the connection is considered to be incorrect. Redo the connection procedure once again.
TRIM
OVER
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
ISOEQ/
LOW
MID
HI
+9
+6-26/
+6-26/
OVER
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
ISOEQ/
TRIM
+9
HI
+6-26/
MID
+6-26/
LOW
DJM-2000NXSCDJ-2000NXS
! Similarly, check the other DJ players.
En10
� Checking the connected device(s)
1 Press one of the medium select buttons to check the connection with the respective device.— To use a computer (Mac/Windows) connected by wired LAN: Press the [rekordbox] button.— When a storage device (USB/SD) set to other players where LINK is connected is to be used: Press the [LINK] button.— To use a mobile device (iOS/Android) or USB device connected by wire to the USB (A terminal): Press the [USB] button.— To use an SD memory card: Press the [SD] button.
! The following describes examples for when the [rekordbox] button is pressed and when the [USB] button is pressed.
2 Press the [rekordbox] button.
DISC
SD
USB
LINK
rekordbox BROWSE TAG LIST INFO MENU
BACKTAG TRACK / REMOVE
QUANTIZE TIME MODE
AUTO CUE
LINK INFO UTILITY
! To use a mobile device (iOS/Android) connected by wire: Press the [USB] button.
3 Tap the [LOAD] icon, or click the [LINK] button to establish the link connection.
rekordbox (iOS/Android) rekordbox (Mac/Windows)
The devices that have been recognized are indicated on the DJ player’s screen.
Ex.: When connecting a computer (Mac/Windows)
The connection completed screen appears.
rekordbox (iOS/Android) rekordbox (Mac/Windows)
This completes checking the connections.
En 11
Connecting
DJ
player (G
roup A
) and D
J m
ixer (Group
B)
2 Connecting DJ player (Group A) and DJ mixer (Group B)
2-1 Connecting rekordbox by wireless LAN
Equipment used! CDJ-2000NXS/CDJ-900NXS/XDJ-1000 (1 to 4)! Wireless router with internal switching hub! Mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed! DJM-900NXS or DJM-900SRT! Audio cable! LAN cables (one for each DJ player + one more)
Connections diagram (when connecting two DJ players)
LEVEL
USBDIGITALCD/ LINE PHONO
1/ 2
HI
MIC 1
MIC 2
HI
LOW
EQEQ/
12 12
12 12
0
0
ONTALKOVEROFF
SPACE
NOISE
CUE
CUE
CUE
CRUSH FILTER
DUBECHO
GATE/COMP
1 2 3 4
BA THRU
TRIM
9
6-26 /MID
6-26 /LOW
6-26 /
COLOR
ISO
OVER
10
10
9
8
7
6
5
4
3
2
1
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
HILOW
TRIM
USBDIGITALCD/ LINE PHONO
7/ 8
HI
EQ/
CUE
BA THRU
9
6-26 /MID
6-26 /LOW
6-26 /
COLOR
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
HILOW
CUE
TRIM
USBDIGITALCD/ LINE LINE
3 /4
HI
EQ/
CUE
BA THRU
9
6-26 /MID
6-26 /LOW
6-26 /
COLOR
ISO
OVER
10
10
9
8
7
6
5
4
3
2
1
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
HILOW
TRIM
USBDIGITALCD/ LINE LINE
5 / 6
HI
EQ/
CUE
BA THRU
MONO STEREO
9
6-26 /MID
6-26 /LOW
6-26 /
COLOR
ISO
OVER
10
10
9
8
7
6
5
4
3
2
1
0 0 0
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB dB RL
0
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
0
HILOW
EQISOLATOR
A B
CROSS FADER ASSIGN
LEVEL
POWER
BALANCE
0
AUTO GRIDTAP
AUTO/ TAP
BPM
%ms
CH SELECT
START/ STOP
RL
WAKE UP
PARAMETER
1 2 3 4MIC MSTA B
TIME
MAX
LEVEL / DEPTH
ON/ OFF
MIN
MIC MASTER MIDI
BEAT EFFECTS
BEAT
TAP
LINK
SOUND COLOR FX
HEADPHONES
FADER START
STEREO
MASTER
0
MIXING
LEVEL
BOOTH MONITOR
EQ CURVE
CH FADER
CROSS FADER
PHONES
CUE
MONO SPLIT
USB
MIC1
QUAN-TIZE
MASTER
CF.B
CF.AMIC4
3
2
1
0
ON/ OFF LFO FORM
UTILITY
X- PAD
ROBOT
REVERB
PHASER
SLIP ROLL
ROLL
FLANGERFILTER
REV ROLL
SND/ RTN
MELODICTRANS
ECHO
SPIRAL
MIDI LFODELAY
CDJ-2000NXS DJM-900NXS CDJ-2000NXS
Audio cable
LAN cable (wired)
Wireless
Connection procedure
� Creating the [PLAYER No.] setting
1 Remove the LAN cable from the equipment and unplug the mobile device (iOS/Android) and storage device (USB/SD) from the DJ player.! When mobile device (iOS/Android) or storage device (USB/SD) are set, and when LINK connection is established, [PLAYER No.] settings cannot be changed.
2 Turn on the power supply of the DJ player and DJ mixer.
3 Open the [UTILITY] screen of the DJ player, and assign the desired number (1 to 4) in [PLAYER No.].! For the display method of [UTILITY] screen, see the operating instructions of each DJ player.
[PLAYER No.] setting screen (ex.: when set to [PLAYER 2])
! Set the second DJ player on in the same way.! [PLAYER No.] is set to [AUTO] upon shipment from the factory.! Set so that no two players have the same player number. If they do, [PLAYER No.] flashes continuously.
En12
� Connecting the cables (LAN cable and audio cables)
1 Connect the wireless router and DJ mixer with LAN cable.
2 Connect the LAN cable and audio cables.Connect in such a way that the DJ player’s player number and the channel number of the terminals to which the DJ mixer’s audio cables are connected are the same number.Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the wireless router is connected to the DJ mixer
OFFRETURN
L
L
L
1 GND 2 HOT3 COLD
L
R
LL
IN
CH3CH4
CH1CH2R
R
R
R
L
R
R
PHONOCH 4 CH 3
CD/LINEL
R
PHONOCH 1
CD/LINE
SIGNAL GND SIGNAL GND
TRS
CD/LINELINE
MASTER1 MASTER2 REC OUT BOOTH
MIC2 MIDI OUT
DIGITAL
MASTEROUT
LINK
L
R
CH 2CD/LINELINE
(MONO)
LR (MONO)
SEND
POWER
AC IN
ON
L L LR
L
R
CH 3
GND SIGN
TRS
CD/LINELINE
MASTER2 REC OUT BOOTH
L
R
CH 2CD/LINELINE
POWERCONTROL
DJM-900NXSCDJ-2000NXS CDJ-2000NXS
POWERCONTROL
LR
L RL R
LR
Checking the connections
� Checking the DJ player’s link established by LAN connection
Check that the player number indicated on the DJ player’s screen is lit in white.Cannot connect to LINKConnecting to LINK
! In case the player No. lights up gray, LINK connection is not established. When there is a DJ player that is lighted up in gray, redo the connection procedure once again.! Similarly, check the other DJ players.
� Checking that the LAN cable and audio cables are synchronized
Load a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly.Check that the player number displayed on the DJ player’s screen is the same as the channel number that lights on the DJ mixer’s channel level indicator.If it does not match, the connection is considered to be incorrect. Redo the connection procedure once again.
HI
EQ/
TRIM
9
6-26 /MID
6-26 /LOW
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
0
TRIM
HI
EQ/
9
6-26 /MID
6-26 /LOW
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
0
DJM-900NXSCDJ-2000NXS
! Similarly, check the other DJ players.
En 13
Connecting
DJ
player (G
roup A
) and D
J m
ixer (Group
B)
� Checking the device(s) connected by wireless connection
1 Connect the computer or mobile device (iOS/Android) to wireless router or access points with wireless LAN.
2 Press the [rekordbox] button.
DISC
SD
USB
LINK
rekordbox BROWSE TAG LIST INFO MENU
BACKTAG TRACK / REMOVE
QUANTIZE TIME MODE
AUTO CUE
LINK INFO UTILITY
3 Tap the [LOAD] icon, or click the [LINK] button to establish the link connection.The devices that have been recognized are indicated on the DJ player’s screen.
rekordbox (iOS/Android) rekordbox (Mac/Windows)
4 Press the DJ player’s rotary selector to authorize the connection.The files, folders and lists loaded into the respective devices are displayed on the DJ player’s screen.
Ex.: When connecting a mobile device (iOS/Android) and a computer (Mac/Windows)
The connection completed screen appears.
rekordbox (iOS/Android) rekordbox (Mac/Windows)
This completes checking the connections.
En14
2-2 Connecting rekordbox via cable/Setting the mobile device (iOS/Android) or storage device (USB/SD)
Equipment used! CDJ-2000NXS/CDJ-900NXS/XDJ-1000 (1 to 4)! Switching hub! USB cable for connecting mobile device (Use the included iPod cable to connect the iPod to the CDJ-2000NXS.)! Mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed! Storage device (USB/SD) on which the music files analyzed by rekordbox are stored.! DJM-900NXS or DJM-900SRT! Audio cable! LAN cables (one for each DJ player + two more)
Connections diagram (when connecting two DJ players)
LEVEL
USBDIGITALCD/ LINE PHONO
1/ 2
HI
MIC 1
MIC 2
HI
LOW
EQEQ/
12 12
12 12
0
0
ONTALKOVEROFF
SPACE
NOISE
CUE
CUE
CUE
CRUSH FILTER
DUBECHO
GATE/COMP
1 2 3 4
BA THRU
TRIM
9
6-26 /MID
6-26 /LOW
6-26 /
COLOR
ISO
OVER
10
10
9
8
7
6
5
4
3
2
1
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
HILOW
TRIM
USBDIGITALCD/ LINE PHONO
7/ 8
HI
EQ/
CUE
BA THRU
9
6-26 /MID
6-26 /LOW
6-26 /
COLOR
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
HILOW
CUE
TRIM
USBDIGITALCD/ LINE LINE
3 /4
HI
EQ/
CUE
BA THRU
9
6-26 /MID
6-26 /LOW
6-26 /
COLOR
ISO
OVER
10
10
9
8
7
6
5
4
3
2
1
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
HILOW
TRIM
USBDIGITALCD/ LINE LINE
5 / 6
HI
EQ/
CUE
BA THRU
MONO STEREO
9
6-26 /MID
6-26 /LOW
6-26 /
COLOR
ISO
OVER
10
10
9
8
7
6
5
4
3
2
1
0 0 0
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB dB RL
0
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
0
HILOW
EQISOLATOR
A B
CROSS FADER ASSIGN
LEVEL
POWER
BALANCE
0
AUTO GRIDTAP
AUTO/ TAP
BPM
%ms
CH SELECT
START/ STOP
RL
WAKE UP
PARAMETER
1 2 3 4MIC MSTA B
TIME
MAX
LEVEL / DEPTH
ON/ OFF
MIN
MIC MASTER MIDI
BEAT EFFECTS
BEAT
TAP
LINK
SOUND COLOR FX
HEADPHONES
FADER START
STEREO
MASTER
0
MIXING
LEVEL
BOOTH MONITOR
EQ CURVE
CH FADER
CROSS FADER
PHONES
CUE
MONO SPLIT
USB
MIC1
QUAN-TIZE
MASTER
CF.B
CF.AMIC4
3
2
1
0
ON/ OFF LFO FORM
UTILITY
X- PAD
ROBOT
REVERB
PHASER
SLIP ROLL
ROLL
FLANGERFILTER
REV ROLL
SND/ RTN
MELODICTRANS
ECHO
SPIRAL
MIDI LFODELAY
CDJ-2000NXS DJM-900NXS CDJ-2000NXS
Audio cable
LAN cable (wired)
USB connections
Connection procedure
� Creating the [PLAYER No.] setting
1 Remove the LAN cable from the equipment and unplug the mobile device (iOS/Android) and storage device (USB/SD) from the DJ player.! When mobile device (iOS/Android) or storage device (USB/SD) are set, and when LINK connection is established, [PLAYER No.] settings cannot be changed.
2 Turn on the power supply of the DJ player and DJ mixer.
3 Open the [UTILITY] screen of the DJ player, and assign the desired number (1 to 4) in [PLAYER No.].! For the display method of [UTILITY] screen, see the operating instructions of each DJ player.
[PLAYER No.] setting screen (ex.: when set to [PLAYER 2])
! Set the second DJ player on in the same way.! [PLAYER No.] is set to [AUTO] upon shipment from the factory.! Set so that no two players have the same player number. If they do, [PLAYER No.] flashes continuously.
En 15
Connecting
DJ
player (G
roup A
) and D
J m
ixer (Group
B)
� Connecting the cables (LAN cable and audio cables)
1 Connect the switching hub and DJ mixer with LAN cable.
2 Connect the LAN cable and audio cables.Connect in such a way that the DJ player’s player number and the channel number of the terminals to which the DJ mixer’s audio cables are connected are the same number.Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the switching hub is connected to the DJ mixer
OFFRETURN
L
L
L
1 GND 2 HOT3 COLD
L
R
LL
IN
CH3CH4
CH1CH2R
R
R
R
L
R
R
PHONOCH 4 CH 3
CD/LINEL
R
PHONOCH 1
CD/LINE
SIGNAL GND SIGNAL GND
TRS
CD/LINELINE
MASTER1 MASTER2 REC OUT BOOTH
MIC2 MIDI OUT
DIGITAL
MASTEROUT
LINK
L
R
CH 2CD/LINELINE
(MONO)
LR (MONO)
SEND
POWER
AC IN
ON
L L LR
L
R
CH 3
GND SIGN
TRS
CD/LINELINE
MASTER2 REC OUT BOOTH
L
R
CH 2CD/LINELINE
POWERCONTROL
DJM-900NXSCDJ-2000NXS CDJ-2000NXS
POWERCONTROL
LR
L RL R
LR
Checking the connections
� Checking the DJ player’s link established by LAN connection
Check that the player number indicated on the DJ player’s screen is lit in white.Cannot connect to LINKConnecting to LINK
! In case the player No. lights up gray, LINK connection is not established. When there is a DJ player that is lighted up in gray, redo the connection procedure once again.! Similarly, check the other DJ players.
� Checking that the LAN cable and audio cables are synchronized
Load a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly.Check that the player number displayed on the DJ player’s screen is the same as the channel number that lights on the DJ mixer’s channel level indicator.If it does not match, the connection is considered to be incorrect. Redo the connection procedure once again.
HI
EQ/
TRIM
9
6-26 /MID
6-26 /LOW
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
0
TRIM
HI
EQ/
9
6-26 /MID
6-26 /LOW
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
0
DJM-900NXSCDJ-2000NXS
! Similarly, check the other DJ players.
En16
� Checking the connected device(s)
1 Press one of the medium select buttons to check the connection with the respective device.— To use a computer (Mac/Windows) connected by wired LAN: Press the [rekordbox] button.— When a storage device (USB/SD) set to other players where LINK is connected is to be used: Press the [LINK] button.— To use a mobile device (iOS/Android) or USB device connected by wire to the USB (A terminal): Press the [USB] button.— To use an SD memory card: Press the [SD] button.
! The following describes examples for when the [rekordbox] button is pressed and when the [USB] button is pressed.
2 Press the [rekordbox] button.
DISC
SD
USB
LINK
rekordbox BROWSE TAG LIST INFO MENU
BACKTAG TRACK / REMOVE
QUANTIZE TIME MODE
AUTO CUE
LINK INFO UTILITY
! To use a mobile device (iOS/Android) connected by wire: Press the [USB] button.
3 Tap the [LOAD] icon, or click the [LINK] button to establish the link connection.
rekordbox (iOS/Android) rekordbox (Mac/Windows)
The devices that have been recognized are indicated on the DJ player’s screen.
Ex.: When connecting a computer (Mac/Windows)
The connection completed screen appears.
rekordbox (iOS/Android) rekordbox (Mac/Windows)
This completes checking the connections.
En 17
Connecting
DJ
player (G
roup A
) and other D
J m
ixers
3 Connecting DJ player (Group A) and other DJ mixers
3-1 Connecting rekordbox by wireless LAN
Equipment used! CDJ-2000NXS/CDJ-900NXS/XDJ-1000 (1 to 4)! Wireless router with internal switching hub! Mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed! Other DJ mixers (DJ mixers other than DJM-2000NXS/DJM-2000/DJM-900NXS/DJM-900SRT)! Audio cable! LAN cables (one for each DJ player)
Connections diagram (when connecting two DJ players)
LEVEL
MIC 1
MIC 2
EQ
0
0
POWER
MIC USB
MIC1
AUTO/ TAP
START/ STOP
CH SELECT
PARAMETER
1 2 3 4
MIC A B MST
TIME
MAX
LEVEL / DEPTH
ON/ OFF
MIN
MIDI
BEAT EFFECTS
BEAT
TAP
ON/ OFF UTILITY
PHASER
SPIRAL
FLANGER
SLIP ROLL
ROLL
FILTERTRANS
REV ROLL
SND/ RTN
ROBOTREVERB
ECHO
PITCH ECHO
DELAY
HI
LOW
12 12
12 12
ONTALKOVEROFF
SOUND COLOR FX
NOISE CUTTER
CRUSH FILTER
1 2 3 4
FADER START
HEAD PHONESSTEREOMONO SPLIT
MASTER
0
MIXING
LEVELCUE
PHONES
CD/LINE PHONO USB1/2
EQ/
TRIM
9
HI
6-26 /MID
6-26 /LOW
6-26 /
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
BEAT
COLOR
HILOW
CUE
BA THRU
10
9
8
7
6
5
4
3
2
1
0
CD/LINE LINE USB3/4
EQ/
TRIM
9
HI
6-26 /MID
6-26 /LOW
6-26 /
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
BEAT
COLOR
HILOW
CUE
BA THRU
10
9
8
7
6
5
4
3
2
1
0
CD/LINE LINE USB5/6
EQ/
TRIM
9
HI
6-26 /MID
6-26 /LOW
6-26 /
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
RL dB
0
BEAT
COLOR
HILOW
CUE
BA THRU
10
9
8
7
6
5
4
3
2
1
0
CD/LINE PHONO USB7/8
EQ/
TRIM
9
HI
6-26 /MID
6-26 /LOW
6-26 /
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
BEAT
COLOR
HILOW
CUE CUE
CUE
BA THRU
STEREO
EQ
MONO
BA
ISOLATOR
WAKE UP
LEVEL
0
BALANCE
RL
MASTER
BOOTH MONITOR
EQ CURVE
CH FADER
CROSS FADER
0
AUTOTAP BPM
%ms
1
2
34 MIC
CF.A
CF.B
MASTER
CROSS FADER ASSIGN
Audio cable
LAN cable (wired)
Wireless
CDJ-2000NXS CDJ-2000NXS
DJ mixer other than theDJM-2000NXS/DJM-2000/DJM-900NXS/DJM-900SRT
Connection procedure
� Creating the [PLAYER No.] setting
1 Remove the LAN cable from the equipment and unplug the mobile device (iOS/Android) and storage device (USB/SD) from the DJ player.! When mobile device (iOS/Android) or storage device (USB/SD) are set, and when LINK connection is established, [PLAYER No.] settings cannot be changed.
2 Turn on the power supply of the DJ player and DJ mixer.
3 Open the [UTILITY] screen of DJ player, and set [PLAYER No.] to [AUTO].! For the display method of [UTILITY] screen, see the operating instructions of each DJ player.
[PLAYER No.] setting screen
! Set the second DJ player on in the same way.! [PLAYER No.] is set to [AUTO] upon shipment from the factory.
� Connecting the cables (LAN cable and audio cables)
For details on connections, see the operating instructions for the respective devices. Connect the LAN cables and audio cables referring to the connections diagrams.
En18
Checking the connections
� Checking the DJ player’s link established by LAN connection
Check that the player number indicated on the DJ player’s screen is lit in white.Cannot connect to LINKConnecting to LINK
! In case the player No. lights up gray, LINK connection is not established. When there is a DJ player that is lighted up in gray, redo the connection procedure once again.! Similarly, check the other DJ players.
� Checking the device(s) connected by wireless connection
1 Connect the computer or mobile device (iOS/Android) to wireless router or access points with wireless LAN.
2 Press the [rekordbox] button.
DISC
SD
USB
LINK
rekordbox BROWSE TAG LIST INFO MENU
BACKTAG TRACK / REMOVE
QUANTIZE TIME MODE
AUTO CUE
LINK INFO UTILITY
3 Tap the [LOAD] icon, or click the [LINK] button to establish the link connection.The devices that have been recognized are indicated on the DJ player’s screen.
rekordbox (iOS/Android) rekordbox (Mac/Windows)
4 Press the DJ player’s rotary selector to authorize the connection.The files, folders and lists loaded into the respective devices are displayed on the DJ player’s screen.
Ex.: When connecting a mobile device (iOS/Android) and a computer (Mac/Windows)
The connection completed screen appears.
rekordbox (iOS/Android) rekordbox (Mac/Windows)
This completes checking the connections.
En 19
Connecting
DJ
player (G
roup A
) and other D
J m
ixers
3-2 Connecting rekordbox via cable/Setting the mobile device (iOS/Android) or storage device (USB/SD)
Equipment used! CDJ-2000NXS/CDJ-900NXS/XDJ-1000 (1 to 4)! Switching hub! USB cable for connecting mobile device (Use the included iPod cable to connect the iPod to the CDJ-2000NXS.)! Mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed! Storage device (USB/SD) on which the music files analyzed by rekordbox are stored.! Other DJ mixers (DJ mixers other than DJM-2000NXS/DJM-2000/DJM-900NXS/DJM-900SRT)! Audio cable! LAN cables (one for each DJ player + one more)
Connections diagram (when connecting two DJ players)
LEVEL
MIC 1
MIC 2
EQ
0
0
POWER
MIC USB
MIC1
AUTO/ TAP
START/ STOP
CH SELECT
PARAMETER
1 2 3 4
MIC A B MST
TIME
MAX
LEVEL / DEPTH
ON/ OFF
MIN
MIDI
BEAT EFFECTS
BEAT
TAP
ON/ OFF UTILITY
PHASER
SPIRAL
FLANGER
SLIP ROLL
ROLL
FILTERTRANS
REV ROLL
SND/ RTN
ROBOTREVERB
ECHO
PITCH ECHO
DELAY
HI
LOW
12 12
12 12
ONTALKOVEROFF
SOUND COLOR FX
NOISE CUTTER
CRUSH FILTER
1 2 3 4
FADER START
HEAD PHONESSTEREOMONO SPLIT
MASTER
0
MIXING
LEVELCUE
PHONES
CD/LINE PHONO USB1/2
EQ/
TRIM
9
HI
6-26 /MID
6-26 /LOW
6-26 /
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
BEAT
COLOR
HILOW
CUE
BA THRU
10
9
8
7
6
5
4
3
2
1
0
CD/LINE LINE USB3/4
EQ/
TRIM
9
HI
6-26 /MID
6-26 /LOW
6-26 /
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
BEAT
COLOR
HILOW
CUE
BA THRU
10
9
8
7
6
5
4
3
2
1
0
CD/LINE LINE USB5/6
EQ/
TRIM
9
HI
6-26 /MID
6-26 /LOW
6-26 /
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
RL dB
0
BEAT
COLOR
HILOW
CUE
BA THRU
10
9
8
7
6
5
4
3
2
1
0
CD/LINE PHONO USB7/8
EQ/
TRIM
9
HI
6-26 /MID
6-26 /LOW
6-26 /
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
BEAT
COLOR
HILOW
CUE CUE
CUE
BA THRU
STEREO
EQ
MONO
BA
ISOLATOR
WAKE UP
LEVEL
0
BALANCE
RL
MASTER
BOOTH MONITOR
EQ CURVE
CH FADER
CROSS FADER
0
AUTOTAP BPM
%ms
1
2
34 MIC
CF.A
CF.B
MASTER
CROSS FADER ASSIGN
CDJ-2000NXS CDJ-2000NXS
Audio cable
LAN cable (wired)
USB connections
DJ mixer other than theDJM-2000NXS/DJM-2000/DJM-900NXS/DJM-900SRT
Connection procedure
� Creating the [PLAYER No.] setting
1 Remove the LAN cable from the equipment and unplug the mobile device (iOS/Android) and storage device (USB/SD) from the DJ player.! When mobile device (iOS/Android) or storage device (USB/SD) are set, and when LINK connection is established, [PLAYER No.] settings cannot be changed.
2 Turn on the power supply of the DJ player and DJ mixer.
3 Open the [UTILITY] screen of DJ player, and set [PLAYER No.] to [AUTO].! For the display method of [UTILITY] screen, see the operating instructions of each DJ player.
[PLAYER No.] setting screen
! Set the second DJ player on in the same way.! [PLAYER No.] is set to [AUTO] upon shipment from the factory.
� Connecting the cables (LAN cable and audio cables)
For details on connections, see the operating instructions for the respective devices. Connect the LAN cables and audio cables referring to the connections diagrams.
En20
Checking the connections
� Checking the DJ player’s link established by LAN connection
Check that the player number indicated on the DJ player’s screen is lit in white.Cannot connect to LINKConnecting to LINK
! In case the player No. lights up gray, LINK connection is not established. When there is a DJ player that is lighted up in gray, redo the connection procedure once again.! Similarly, check the other DJ players.
� Checking the connected device(s)
1 Press one of the medium select buttons to check the connection with the respective device.— To use a computer (Mac/Windows) connected by wired LAN: Press the [rekordbox] button.— When a storage device (USB/SD) set to other players where LINK is connected is to be used: Press the [LINK] button.— To use a mobile device (iOS/Android) or USB device connected by wire to the USB (A terminal): Press the [USB] button.— To use an SD memory card: Press the [SD] button.
! The following describes examples for when the [rekordbox] button is pressed and when the [USB] button is pressed.
2 Press the [rekordbox] button.
DISC
SD
USB
LINK
rekordbox BROWSE TAG LIST INFO MENU
BACKTAG TRACK / REMOVE
QUANTIZE TIME MODE
AUTO CUE
LINK INFO UTILITY
! To use a mobile device (iOS/Android) connected by wire: Press the [USB] button.
3 Tap the [LOAD] icon, or click the [LINK] button to establish the link connection.
rekordbox (iOS/Android) rekordbox (Mac/Windows)
The devices that have been recognized are indicated on the DJ player’s screen.
Ex.: When connecting a computer (Mac/Windows)
The connection completed screen appears.
rekordbox (iOS/Android) rekordbox (Mac/Windows)
This completes checking the connections.
En 21
Connecting
DJ
player (G
roup B
) and D
J m
ixer (Group
A)
4 Connecting DJ player (Group B) and DJ mixer (Group A)Connecting rekordbox via cable/Setting the storage device (USB/SD)
Equipment used! CDJ-2000/CDJ-900 (1 to 4)! Computer (Mac/Windows) on which rekordbox is installed! Storage device (USB/SD) on which the music files analyzed by rekordbox are stored.! DJM-2000NXS or DJM-2000! Audio cable! LAN cables (one for each DJ player + one more)
Connections diagram (when connecting two DJ players)
PLAY / PAUSE
CUE
SEARCH
TRACK SEARCH
FWD
REV
DIRECTION
USBSTOP
LINK
USB
SD
DISC
BROWSE TAG LIST INFO MENU
UTILITY
REV FWD
TEMPORESET
MASTERTEMPO
TEMPO6 WIDE10 16
VINYL JOGMODECDJ
RELEASE / START
TOUCH / BRAKE
VINYLSPEED ADJUST
LIGHT HEAVY
JOG ADJUST
CUE/LOOP DELETE MEMORY
UNLOCK
OFFON
LOCK
POWER
DISC EJECT
STANDBY
BACK / REMOVETAG TRACK
TIMEMODE
AUTOCUE
OUT RELOOP/EXIT
LOOP
NEEDLE SEARCH
CALL
IN ADJUST OUT ADJUST
LOOP CUTTER
4-BEAT LOOP
IN / CUE
REC / CALL
SD
HOT CUE
TEMPO
0
MULTI PLAYER CDJ-2000
Audio cable
LAN cable (wired)
CDJ-2000 CDJ-2000DJM-2000NXS
PLAY / PAUSE
CUE
SEARCH
TRACK SEARCH
FWD
REV
DIRECTION
USBSTOP
LINK
USB
SD
DISC
BROWSE TAG LIST INFO MENU
UTILITY
REV FWD
TEMPORESET
MASTERTEMPO
TEMPO6 WIDE10 16
VINYL JOGMODECDJ
RELEASE / START
TOUCH / BRAKE
VINYLSPEED ADJUST
LIGHT HEAVY
JOG ADJUST
CUE/LOOP DELETE MEMORY
UNLOCK
OFFON
LOCK
POWER
DISC EJECT
STANDBY
BACK / REMOVETAG TRACK
TIMEMODE
AUTOCUE
OUT RELOOP/EXIT
LOOP
NEEDLE SEARCH
CALL
IN ADJUST OUT ADJUST
LOOP CUTTER
4-BEAT LOOP
IN / CUE
REC / CALL
SD
HOT CUE
TEMPO
0
MULTI PLAYER CDJ-2000
OVER
POWER
CD/DIGITAL PHONO USB 1/2
TRIM
CHSELECT
EFFECT SELECT
EFFECT FREQUENCY
1 2 3 4
OFFON
MASTER
LINK
HEADPHONES
MIC
INST FX
MIDI
CURVE SETTING
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
10
9
78
6
5
4
3
2
1
0
BALANCE
LOW
TIME
LIVESAMPLER
WAKE UP
LEVEL/DEPTH
1/8 1/4 1/2 3/4 1/1 2/1 4/1
MIN MAX
MIN MAX
AUTO/TAP
TAP
ON/OFF
ON/OFF
CUE
CUE
CUE
A B
DELAY
ECHO FILTER
GATEROLL TRANS
REVERB
MULTI TAPDELAY
PHASERSLIPROLL
SEND/RETURN
REVROLL
CUE
CUE
NOISE JET
ZIP HPF
CRUSH LPF
MONO
ON/OFF
CH EQ
EQ
CROSS FADER
CH FADER
ISOLATOR
START/STOP
SNAPSHOT
UTILITY
BOOTH MONITOR
STEREO
MONO SPLIT STEREO
L R
DJM-2000 nexus
- 0
L R
FILTER
PARAMETERMIN MAX
OVER
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
ISOEQ/
EQ
LOW
MID
HI
+9
+6
- 0
0
LOW
MIN MAX
CUE MASTER
PHONES
LEVEL
MIXING
HI
-26/
+6-26/
+6-26/
-12 +12
OFF ON OVERTALK
PROFESSIONAL MIXER
10
9
78
6
5
4
3
2
1
0
A BTHRU A BTHRU
CROSS FADER ASSIGN
A BTHRU A BTHRU
CROSS FADER ASSIGN
MICLEVEL
0-
CUE
FILTER
MIN MAX
CUE
FILTER
MIN MAX
CUE
FILTER
MIN MAX
-12 +12
CD/DIGITAL LINE USB 3/4
OVER
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
ISOEQ/
ISOEQ/
TRIM
+9
HI
+6-26/
MID
+6-26/
LOW
+6-26/
CD/DIGITAL LINE USB 5/6
TRIM
+9
HI
+6-26/
MID
+6-26/
LOW
+6-26/
OVER
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
ISOEQ/
CD/DIGITAL PHONO USB 7/8
TRIM
+9
HI
+6-26/
MID
+6-26/
LOW
+6-26/
OVER
MIC A B M
MID
MIN MAX
HI
MIN MAX
MIX
REMIX
SYNC MASTER
Connection procedure
� Creating the [PLAYER No.] setting
1 Remove the LAN cable from the equipment and unplug the storage device (USB/SD) from the DJ player.! When storage device (USB/SD) is set, and when LINK connection is established, [PLAYER No.] settings cannot be changed.
2 Turn on the power supply of the DJ player and DJ mixer.
3 Open the [UTILITY] screen of DJ player, and set [PLAYER No.] to [AUTO].! For the display method of [UTILITY] screen, see the operating instructions of each DJ player.
[PLAYER No.] setting screen
! Set the second DJ player on in the same way.! [PLAYER No.] is set to [AUTO] upon shipment from the factory.
� Connecting the cables (LAN cable and audio cables)
Connect the LAN cable and audio cables.Connect in such a way that the channel number of the DJ mixer’s LAN cable insertion port and the channel number of the terminals to which the audio cables are connected are the same number.Connect computer to [COMPUTER1] or [COMPUTER2] of DJ mixer.Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the computer (Mac/Windows) is connected to [COMPUTER1]
SIGNAL GND
CD
CDL
R
L
R
PHONOCDLINE
CONTROLOUT IN
TRS
R LR L
R
LR L(MONO) R L(MONO)
COMPUTER 1
COMPUTER 2
LINK
CH 3 CH 1
CH 4 CH 2
CH2CH3CH4 CH1DIGITAL
SIGNAL GND
CD
1GND
-6dB -3dB 0dB
2HOT3COLD
CDL
R
PHONO
POWER
AC IN
OFFON
MASTERATT.
DIGITAL CD DIGITAL
L
R
CDLINE
CONTROLCD DIGITAL
CH3CH4
MASTER1 MASTER2 REC OUT BOOTH SEND RETURN
DIGITAL
CH1CH2
USBMIDI OUT
RR
CONTROL
O)
COMPUTER 1
COMPUTER 2
LINK
CH 3 CH 1
CH 4 CH 2
CD DIGITAL
AUDIO OUTR L
CONTROL
LINK USB
DIGITALOUT
POWER
AUDIO OUTR L
CONTROL
LINK USB
DIGITALOUT
POWER
DJM-2000NXS CDJ-2000CDJ-2000
Checking the connections
� Checking the DJ player’s link established by LAN connection (for the CDJ-2000)
Check that the player number indicated on the DJ player’s screen is lit in white.Cannot connect to LINKConnecting to LINK
! In case the player No. lights up gray, LINK connection is not established. When there is a DJ player that is lighted up in gray, redo the connection procedure once again.! Similarly, check the other DJ players.
� Checking the DJ player’s link established by LAN connection (for the CDJ-900)
Touch and hold the [MENU/UTILITY] button of DJ player for 1 second or more to open the [UTILITY] screen, and confirm that [LINK STATUS] is set to [CONNECTED].
UTILITY2NOT CONNECTEDON–
PLAYER No.LINK STATUSAUTO STANDBYMIDI CHANNEL
UTILITY2CONNECTEDON–
PLAYER No.LINK STATUSAUTO STANDBYMIDI CHANNEL
Cannot connect to LINKConnecting to LINK
! In case [NOT CONNECTED] is displayed, LINK connection is not established. In case of the DJ player where [NOT CONNECTED] is displayed, redo the connection proce-dure once again.
! Similarly, check the other DJ players.
� Checking that the LAN cable and audio cables are synchronized
Load a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly.Check that the player number displayed on the DJ player’s screen is the same as the channel number that lights on the DJ mixer’s channel level indicator.If it does not match, the connection is considered to be incorrect. Redo the connection procedure once again.
CD/DIGITAL PHONO USB 1/2
TRIM
FILTER
OVER
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
ISOEQ/
LOW
MID
HI
+9
+6-26/
+6-26/
+6-26/
FILTER
CD/DIGITAL LINE USB 3/4
OVER
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
ISOEQ/
TRIM
+9
HI
+6-26/
MID
+6-26/
LOW
+6-26/
DJM-2000NXSCDJ-900
CDJ-2000
! Similarly, check the other DJ players.
En22
En 23
Connecting
DJ
player (G
roup B
) and D
J m
ixer (Group
A)
� Checking the connected device(s)
1 Press one of the medium select buttons to check the connection with the respective device.— To use a computer (Mac/Windows) connected by wired LAN: Press the [LINK] button.— When a storage device (USB/SD) set to other players where LINK is connected is to be used: Press the [LINK] button.— To use a USB device connected by wire to the USB (A terminal): Press the [USB] button.— To use an SD memory card: Press the [SD] button.
! The following describes an example for when using a computer (Mac/Windows) connected by wired LAN (for when the [LINK] button is pressed).
2 Press the [LINK] button.
LINK
USB
SD
DISC
BROWSE TAG LIST INFO MENU
UTILITY BACK / REMOVETAG TRACK
TIMEMODE
AUTOCUE
3 Click the [LINK] button to connect.
rekordbox (Mac/Windows)
The files, folders and lists loaded into the respective devices are displayed on the DJ player’s screen.
Ex.: When connecting a computer (Mac/Windows)
rekordbox (Mac/Windows)
This completes checking the connections.
5 Connecting DJ player (Group B) and DJ mixer (Group B)Connecting rekordbox via cable/Setting the storage device (USB/SD)
Equipment used! CDJ-2000/CDJ-900 (1 to 4)! Switching hub! Computer (Mac/Windows) on which rekordbox is installed! Storage device (USB/SD) on which the music files analyzed by rekordbox are stored.! DJM-900NXS or DJM-900SRT! Audio cable! LAN cables (one for each DJ player + two more)
Connections diagram (when connecting two DJ players)
PLAY / PAUSE
CUE
SEARCH
TRACK SEARCH
FWD
REV
DIRECTION
USBSTOP
LINK
USB
SD
DISC
BROWSE TAG LIST INFO MENU
UTILITY
REV FWD
TEMPORESET
MASTERTEMPO
TEMPO6 WIDE10 16
VINYL JOGMODECDJ
RELEASE / START
TOUCH / BRAKE
VINYLSPEED ADJUST
LIGHT HEAVY
JOG ADJUST
CUE/LOOP DELETE MEMORY
UNLOCK
OFFON
LOCK
POWER
DISC EJECT
STANDBY
BACK / REMOVETAG TRACK
TIMEMODE
AUTOCUE
OUT RELOOP/EXIT
LOOP
NEEDLE SEARCH
CALL
IN ADJUST OUT ADJUST
LOOP CUTTER
4-BEAT LOOP
IN / CUE
REC / CALL
SD
HOT CUE
TEMPO
0
MULTI PLAYER CDJ-2000
CDJ-2000 CDJ-2000DJM-900NXS
Audio cable
LAN cable (wired)PLAY / PAUSE
CUE
SEARCH
TRACK SEARCH
FWD
REV
DIRECTION
USBSTOP
LINK
USB
SD
DISC
BROWSE TAG LIST INFO MENU
UTILITY
REV FWD
TEMPORESET
MASTERTEMPO
TEMPO6 WIDE10 16
VINYL JOGMODECDJ
RELEASE / START
TOUCH / BRAKE
VINYLSPEED ADJUST
LIGHT HEAVY
JOG ADJUST
CUE/LOOP DELETE MEMORY
UNLOCK
OFFON
LOCK
POWER
DISC EJECT
STANDBY
BACK / REMOVETAG TRACK
TIMEMODE
AUTOCUE
OUT RELOOP/EXIT
LOOP
NEEDLE SEARCH
CALL
IN ADJUST OUT ADJUST
LOOP CUTTER
4-BEAT LOOP
IN / CUE
REC / CALL
SD
HOT CUE
TEMPO
0
MULTI PLAYER CDJ-2000
LEVEL
USBDIGITALCD/ LINE PHONO
1/ 2
HI
MIC 1
MIC 2
HI
LOW
EQEQ/
12 12
12 12
0
0
ONTALKOVEROFF
SPACE
NOISE
CUE
CUE
CUE
CRUSH FILTER
DUBECHO
GATE/COMP
1 2 3 4
BA THRU
TRIM
9
6-26 /MID
6-26 /LOW
6-26 /
COLOR
ISO
OVER
10
10
9
8
7
6
5
4
3
2
1
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
HILOW
TRIM
USBDIGITALCD/ LINE PHONO
7/ 8
HI
EQ/
CUE
BA THRU
9
6-26 /MID
6-26 /LOW
6-26 /
COLOR
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
HILOW
CUE
TRIM
USBDIGITALCD/ LINE LINE
3 /4
HI
EQ/
CUE
BA THRU
9
6-26 /MID
6-26 /LOW
6-26 /
COLOR
ISO
OVER
10
10
9
8
7
6
5
4
3
2
1
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
HILOW
TRIM
USBDIGITALCD/ LINE LINE
5 / 6
HI
EQ/
CUE
BA THRU
MONO STEREO
9
6-26 /MID
6-26 /LOW
6-26 /
COLOR
ISO
OVER
10
10
9
8
7
6
5
4
3
2
1
0 0 0
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB dB RL
0
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
0
HILOW
EQISOLATOR
A B
CROSS FADER ASSIGN
LEVEL
POWER
BALANCE
0
AUTO GRIDTAP
AUTO/ TAP
BPM
%ms
CH SELECT
START/ STOP
RL
WAKE UP
PARAMETER
1 2 3 4MIC MSTA B
TIME
MAX
LEVEL / DEPTH
ON/ OFF
MIN
MIC MASTER MIDI
BEAT EFFECTS
BEAT
TAP
LINK
SOUND COLOR FX
HEADPHONES
FADER START
STEREO
MASTER
0
MIXING
LEVEL
BOOTH MONITOR
EQ CURVE
CH FADER
CROSS FADER
PHONES
CUE
MONO SPLIT
USB
MIC1
QUAN-TIZE
MASTER
CF.B
CF.AMIC4
3
2
1
0
ON/ OFF LFO FORM
UTILITY
X- PAD
ROBOT
REVERB
PHASER
SLIP ROLL
ROLL
FLANGERFILTER
REV ROLL
SND/ RTN
MELODICTRANS
ECHO
SPIRAL
MIDI LFODELAY
Connection procedure
� Creating the [PLAYER No.] setting
1 Remove the LAN cable from the equipment and unplug the storage device (USB/SD) from the DJ player.! When storage device (USB/SD) is set, and when LINK connection is established, [PLAYER No.] settings cannot be changed.
2 Turn on the power supply of the DJ player and DJ mixer.
3 Open the [UTILITY] screen of the DJ player, and assign the desired number (1 to 4) in [PLAYER No.].! For the display method of [UTILITY] screen, see the operating instructions of each DJ player.
[PLAYER No.] setting screen (ex.: when set to [PLAYER 2])
! Set the second DJ player on in the same way.! [PLAYER No.] is set to [AUTO] upon shipment from the factory.! Set so that no two players have the same player number. If they do, [PLAYER No.] flashes continuously.
En24
En 25
Connecting
DJ
player (G
roup B
) and D
J m
ixer (Group
B)
� Connecting the cables (LAN cable and audio cables)
1 Connect the switching hub and DJ mixer with LAN cable.
2 Connect the LAN cable and audio cables.Connect in such a way that the DJ player’s player number and the channel number of the terminals to which the DJ mixer’s audio cables are connected are the same number.Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the computer (Mac/Windows) is connected to the DJ mixer
OFFRETURN
L
L
L
1 GND 2 HOT3 COLD
L
R
LL
IN
CH3CH4
CH1CH2R
R
R
R
L
R
R
PHONOCH 4 CH 3
CD/LINEL
R
PHONOCH 1
CD/LINE
SIGNAL GND SIGNAL GND
TRS
CD/LINELINE
MASTER1 MASTER2 REC OUT BOOTH
MIC2 MIDI OUT
DIGITAL
MASTEROUT
LINK
L
R
CH 2CD/LINELINE
(MONO)
LR (MONO)
SEND
POWER
AC IN
ON
L L LR
L
R
CH 3
GND SIGN
TRS
CD/LINELINE
MASTER2 REC OUT BOOTH
L
R
CH 2CD/LINELINE
AUDIO OUTR L
CONTROL
LINK USB
DIGITALOUT
POWER
AUDIO OUTR L
CONTROL
LINK USB
DIGITALOUT
POWER
DJM-900NXS CDJ-2000CDJ-2000
L R
LR
L R
LR
Checking the connections
� Checking the DJ player’s link established by LAN connection (for the CDJ-2000)
Check that the player number indicated on the DJ player’s screen is lit in white.Cannot connect to LINKConnecting to LINK
! In case the player No. lights up gray, LINK connection is not established. When there is a DJ player that is lighted up in gray, redo the connection procedure once again.! Similarly, check the other DJ players.
� Checking the DJ player’s link established by LAN connection (for the CDJ-900)
Touch and hold the [MENU/UTILITY] button of DJ player for 1 second or more to open the [UTILITY] screen, and confirm that [LINK STATUS] is set to [CONNECTED].
UTILITY2NOT CONNECTEDON–
PLAYER No.LINK STATUSAUTO STANDBYMIDI CHANNEL
UTILITY2CONNECTEDON–
PLAYER No.LINK STATUSAUTO STANDBYMIDI CHANNEL
Cannot connect to LINKConnecting to LINK
! In case [NOT CONNECTED] is displayed, LINK connection is not established. In case of the DJ player where [NOT CONNECTED] is displayed, redo the connection proce-dure once again.
! Similarly, check the other DJ players.
� Checking that the LAN cable and audio cables are synchronized
Load a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly.Check that the player number displayed on the DJ player’s screen is the same as the channel number that lights on the DJ mixer’s channel level indicator.If it does not match, the connection is considered to be incorrect. Redo the connection procedure once again.
HI
EQ/
TRIM
9
6-26 /MID
6-26 /LOW
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
0
TRIM
HI
EQ/
9
6-26 /MID
6-26 /LOW
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
0
HI
EQ/
TRIM
9
6-26 /MID
6-26 /LOW
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
0
TRIM
HI
EQ/
9
6-26 /MID
6-26 /LOW
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
0
DJM-900NXSCDJ-900
CDJ-2000
! Similarly, check the other DJ players.
� Checking the connected device(s)
1 Press one of the medium select buttons to check the connection with the respective device.— To use a computer (Mac/Windows) connected by wired LAN: Press the [LINK] button.— When a storage device (USB/SD) set to other players where LINK is connected is to be used: Press the [LINK] button.— To use a USB device connected by wire to the USB (A terminal): Press the [USB] button.— To use an SD memory card: Press the [SD] button.
! The following describes an example for when using a computer (Mac/Windows) connected by wired LAN (for when the [LINK] button is pressed).
2 Press the [LINK] button.
LINK
USB
SD
DISC
BROWSE TAG LIST INFO MENU
UTILITY BACK / REMOVETAG TRACK
TIMEMODE
AUTOCUE
3 Click the [LINK] button to connect.
rekordbox (Mac/Windows)
The files, folders and lists loaded into the respective devices are displayed on the DJ player’s screen.
Ex.: When connecting a computer (Mac/Windows)
rekordbox (Mac/Windows)
This completes checking the connections.
En26
En 27
Connecting
DJ
player (G
roup B
) and other D
J m
ixers
6 Connecting DJ player (Group B) and other DJ mixersConnecting rekordbox via cable/Setting the storage device (USB/SD)
Equipment used! CDJ-2000/CDJ-900 (1 to 4)! Switching hub! Computer (Mac/Windows) on which rekordbox is installed! Storage device (USB/SD) on which the music files analyzed by rekordbox are stored.! Other DJ mixers (DJ mixers other than DJM-2000NXS/DJM-2000/DJM-900NXS/DJM-900SRT)! Audio cable! LAN cables (one for each DJ player + one more)
Connections diagram (when connecting two DJ players)
PLAY / PAUSE
CUE
SEARCH
TRACK SEARCH
FWD
REV
DIRECTION
USBSTOP
LINK
USB
SD
DISC
BROWSE TAG LIST INFO MENU
UTILITY
REV FWD
TEMPORESET
MASTERTEMPO
TEMPO6 WIDE10 16
VINYL JOGMODECDJ
RELEASE / START
TOUCH / BRAKE
VINYLSPEED ADJUST
LIGHT HEAVY
JOG ADJUST
CUE/LOOP DELETE MEMORY
UNLOCK
OFFON
LOCK
POWER
DISC EJECT
STANDBY
BACK / REMOVETAG TRACK
TIMEMODE
AUTOCUE
OUT RELOOP/EXIT
LOOP
NEEDLE SEARCH
CALL
IN ADJUST OUT ADJUST
LOOP CUTTER
4-BEAT LOOP
IN / CUE
REC / CALL
SD
HOT CUE
TEMPO
0
MULTI PLAYER CDJ-2000
PLAY / PAUSE
CUE
SEARCH
TRACK SEARCH
FWD
REV
DIRECTION
USBSTOP
LINK
USB
SD
DISC
BROWSE TAG LIST INFO MENU
UTILITY
REV FWD
TEMPORESET
MASTERTEMPO
TEMPO6 WIDE10 16
VINYL JOGMODECDJ
RELEASE / START
TOUCH / BRAKE
VINYLSPEED ADJUST
LIGHT HEAVY
JOG ADJUST
CUE/LOOP DELETE MEMORY
UNLOCK
OFFON
LOCK
POWER
DISC EJECT
STANDBY
BACK / REMOVETAG TRACK
TIMEMODE
AUTOCUE
OUT RELOOP/EXIT
LOOP
NEEDLE SEARCH
CALL
IN ADJUST OUT ADJUST
LOOP CUTTER
4-BEAT LOOP
IN / CUE
REC / CALL
SD
HOT CUE
TEMPO
0
MULTI PLAYER CDJ-2000
LEVEL
MIC 1
MIC 2
EQ
0
0
POWER
MIC USB
MIC1
AUTO/ TAP
START/ STOP
CH SELECT
PARAMETER
1 2 3 4
MIC A B MST
TIME
MAX
LEVEL / DEPTH
ON/ OFF
MIN
MIDI
BEAT EFFECTS
BEAT
TAP
ON/ OFF UTILITY
PHASER
SPIRAL
FLANGER
SLIP ROLL
ROLL
FILTERTRANS
REV ROLL
SND/ RTN
ROBOTREVERB
ECHO
PITCH ECHO
DELAY
HI
LOW
12 12
12 12
ONTALKOVEROFF
SOUND COLOR FX
NOISE CUTTER
CRUSH FILTER
1 2 3 4
FADER START
HEAD PHONESSTEREOMONO SPLIT
MASTER
0
MIXING
LEVELCUE
PHONES
CD/LINE PHONO USB1/2
EQ/
TRIM
9
HI
6-26 /MID
6-26 /LOW
6-26 /
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
BEAT
COLOR
HILOW
CUE
BA THRU
10
9
8
7
6
5
4
3
2
1
0
CD/LINE LINE USB3/4
EQ/
TRIM
9
HI
6-26 /MID
6-26 /LOW
6-26 /
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
BEAT
COLOR
HILOW
CUE
BA THRU
10
9
8
7
6
5
4
3
2
1
0
CD/LINE LINE USB5/6
EQ/
TRIM
9
HI
6-26 /MID
6-26 /LOW
6-26 /
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
RL dB
0
BEAT
COLOR
HILOW
CUE
BA THRU
10
9
8
7
6
5
4
3
2
1
0
CD/LINE PHONO USB7/8
EQ/
TRIM
9
HI
6-26 /MID
6-26 /LOW
6-26 /
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
BEAT
COLOR
HILOW
CUE CUE
CUE
BA THRU
STEREO
EQ
MONO
BA
ISOLATOR
WAKE UP
LEVEL
0
BALANCE
RL
MASTER
BOOTH MONITOR
EQ CURVE
CH FADER
CROSS FADER
0
AUTOTAP BPM
%ms
1
2
34 MIC
CF.A
CF.B
MASTER
CROSS FADER ASSIGN
Audio cable
LAN cable (wired)
CDJ-2000 CDJ-2000
DJ mixer other than theDJM-2000NXS/DJM-2000/DJM-900NXS/DJM-900SRT
Connection procedure
� Creating the [PLAYER No.] setting
1 Remove the LAN cable from the equipment and unplug the storage device (USB/SD) from the DJ player.! When storage device (USB/SD) is set, and when LINK connection is established, [PLAYER No.] settings cannot be changed.
2 Turn on the power supply of the DJ player and DJ mixer.
3 Open the [UTILITY] screen of the DJ player, and assign the desired number (1 to 4) in [PLAYER No.].! For the display method of [UTILITY] screen, see the operating instructions of each DJ player.
[PLAYER No.] setting screen (ex.: when set to [PLAYER 2])
! Set the second DJ player on in the same way.! [PLAYER No.] is set to [AUTO] upon shipment from the factory.! Set so that no two players have the same player number. If they do, [PLAYER No.] flashes continuously.
� Connecting the cables (LAN cable and audio cables)For details on connections, see the operating instructions for the respective devices. Connect the LAN cables and audio cables referring to the connections diagrams.
Checking the connections
� Checking the DJ player’s link established by LAN connection (for the CDJ-2000)
Check that the player number indicated on the DJ player’s screen is lit in white.Cannot connect to LINKConnecting to LINK
! In case the player No. lights up gray, LINK connection is not established. When there is a DJ player that is lighted up in gray, redo the connection procedure once again.! Similarly, check the other DJ players.
� Checking the DJ player’s link established by LAN connection (for the CDJ-900)
Touch and hold the [MENU/UTILITY] button of DJ player for 1 second or more to open the [UTILITY] screen, and confirm that [LINK STATUS] is set to [CONNECTED].
UTILITY2NOT CONNECTEDON–
PLAYER No.LINK STATUSAUTO STANDBYMIDI CHANNEL
UTILITY2CONNECTEDON–
PLAYER No.LINK STATUSAUTO STANDBYMIDI CHANNEL
Cannot connect to LINKConnecting to LINK
! In case [NOT CONNECTED] is displayed, LINK connection is not established. In case of the DJ player where [NOT CONNECTED] is displayed, redo the connection proce-dure once again.
! Similarly, check the other DJ players.
� Checking the connected device(s)
1 Press one of the medium select buttons to check the connection with the respective device.— To use a computer (Mac/Windows) connected by wired LAN: Press the [LINK] button.— When a storage device (USB/SD) set to other players where LINK is connected is to be used: Press the [LINK] button.— To use a USB device connected by wire to the USB (A terminal): Press the [USB] button.— To use an SD memory card: Press the [SD] button.
! The following describes an example for when using a computer (Mac/Windows) connected by wired LAN (for when the [LINK] button is pressed).
2 Press the [LINK] button.
LINK
USB
SD
DISC
BROWSE TAG LIST INFO MENU
UTILITY BACK / REMOVETAG TRACK
TIMEMODE
AUTOCUE
3 Click the [LINK] button to connect.
rekordbox (Mac/Windows)
En28
En 29
Connecting
DJ
player (G
roup B
) and other D
J m
ixersThe files, folders and lists loaded into the respective devices are displayed on the DJ player’s screen.
Ex.: When connecting a computer (Mac/Windows)
rekordbox (Mac/Windows)
This completes checking the connections.
© 2012 PIONEER CORPORATION.All rights reserved.<DRI1124-C>
top related