probelogic service sample

Recoating and relabeling of a TEE insertion tube

Before

We recieved a GE 6VT 3d TOE/TEE probe in for repair and ithad severe insertion tube damage as can be seen.

LEARN MORESubscribe to Probelogic blog

Recoating and relabeling of a TEE insertion tube

After

After the ProbeLogic Recoat/Relabel process the probe is backto new condition

LEARN MORESubscribe to Probelogic blog

Frightening! TEE probe with fine wire protruding

We received a TEE/TOE probe in for repair. Protruding from the side of the bending rubber section was a very fine piece of stainless steel wire which had broken away from the articulation wires. The thought of this being inserted into somebody’s esophagus with this protruding from the side is quite frightening!

LEARN MORESubscribe to Probelogic blog

Frightening! TEE probe with fine wire protruding

We received a TEE/TOE probe in for repair. Protruding from the side of the bending rubber section was a very fine piece of stainless steel wire which had broken away from the articulation wires. The thought of this being inserted into somebody’s esophagus with this protruding from the side is quite frightening!

LEARN MORESubscribe to Probelogic blog

Probe case seperating? Check out whats inside!

LEARN MORESubscribe to Probelogic blog

We currently have a probe in the lab for poor imaging. On initial inspection all seemed fairly normal but with a slight separation of the seams of the probe.

Probe case seperating? Check out whats inside!

LEARN MORESubscribe to Probelogic blog

After removing the covers look at the amount of ultrasound gel and other fluid that has been forced inside the probe.

Probe case seperating? Check out whats inside!

LEARN MORESubscribe to Probelogic blog

After removing the covers look at the amount of ultrasound gel and other fluid that has been forced inside the probe.

Probe case seperating? Check out whats inside!

LEARN MORESubscribe to Probelogic blog

This amount of fluid inside the probe for such a long period of time resulted in all of this corrosion.

Probe case seperating? Check out whats inside!

LEARN MORESubscribe to Probelogic blog

This amount of fluid inside the probe for such a long period of time resulted in all of this corrosion.

Probe case seperating? Check out whats inside!

LEARN MORESubscribe to Probelogic blog

This damage can often be repaired but is quite costly. Avoiding this cost is as simple as sending your probe to us as soon as you notice the gap in the cases. Inspect your probes today.

Rebuilding a GE 6T probe – Before and after internal

LEARN MORESubscribe to Probelogic blog

Rebuilding a GE 6T probe – Before and after internal

LEARN MORESubscribe to Probelogic blog