pue zabrze radial axial eng - deutsche messe...
Post on 10-Mar-2021
1 Views
Preview:
TRANSCRIPT
CFXHCFHCFM
CFMT
CFL
Centrifugal Low Pressure Fans
Centrifugal Medium Pressure Fans
CentrifugalExtrem High Pressure Fans
Centrifugal High PressureFans
Centrifugal Conveying Fans
PRODUCT REVIEW
STEELINDUSTRIALFANS
MAFGMAFRHAFCMAF
Axial Medium Pressure Fans
AxialHigh Pressure Fans
AxialGarage Fans
AxialRoof Fans
MAFW
AxialWall Fans
02.0
9/02
TECHNICAL INFORMATION
2
Conversion table
Units of measurement
from unit of measurement
with conversion factor
in units of measurement
from units of measurement
with conversion factor
into units of measurement
Pressure bar 1000 mbar mbar 0,001 bar
Pressure mbar 100 Pa Pa 0,01 mbar
Pressure mmWS 0,098 mbar mbar 10,2 mm H2O
Pressure mWS 98,07 mbar mbar 0,0102 m H2O
European units of measurement in the USA
from SI-unit of measurement
with conversion factor
into anglo-amer. unit of measur.
from anglo-amer. unit of measur.
with conversion factor
from SI-units of measurement
Pressure bar 0,014 psi = Ib/in² psi = Ib/in² 68,95 mbar
Pressure mbar 14,5 psi = Ib/in² psi = Ib/in² 0,068 bar
Pressure mmWS 0,402 inches water inches water 2,49 mbar
Volumetric fl ow rate m³/min 264,2 gal/min gal/min 0,003 m³/min
Volumetric fl ow rate m³/min 35,31 cfm cfm 0,028 m³/min
ElectricalPower output
kW 1,341 hp hp 0,746 kW
Length mmWS 0,039 inches water inches water 25,4 mm
Length m 39,37 inches water inches water 0,025 m
Length mmWS 0,003 ft ft 305 mm
Length m 3,28 ft ft 0,305 m
Weight kg 2,05 Ib Ib 0,454 kg
Example for conversion
Pressure 180 mbar 0,014 2,61 PSI 2,61 PSI 68,95 180 mbar
Volumetric fl ow rate 6 m³/min 35,31 211,8 ft³/min 211,8 ft³/min 0,283 6 m³/min
02.0
9/02
CFLCENTRIFUGAL LOW PRESSURE FANS
up to 87.000 m³/h and 3.100 Pa
Page 4
CFHCENTRIFUGAL HIGH PRESSURE FANS
up to 115.000 m³/h and 9.000 Pa
Page 6
CFMTCENTRIFUGAL CONVEYING FANS
up to 29.500 m³/h and 6.100 Pa
Page 8
CFMCENTRIFUGAL MEDIUM PRESSURE FANS
up to 99.000 m³/h and 5.400 Pa
Page 5
CFXHCENTRIFUGAL EXTREM HIGH PRESSURE FANS
up to 104.000 m³/h and 13.900 Pa
Page 7
OVERVIEW CENTRIFUGAL FANS
3
02.0
9/02
CFL rangeRectangular casing welded from mild steel, impellers unilaterally sucking with welded, backward-bent circulararch vanes from steel. Low-maintenance squirrel cagemotors to IP 55. The fans can be supplied inclockwise or anti-clockwise rotation. Direct driven with conventional motor B3 or fl ange motor B5, belt driven with base frame . Variable execution, 2-step speed variable, stepless by frequency converter. A variety of accessories like connectors , inspection door , drainage plug etc.Special designs for specifi c applications, e. g. for highermedia fl ow and ambient temperatures, with improvedcorrosion protection, with sealed housing parts, for special voltage and frequency.
Applications• Conveying of high air volumes at low and medium system resistance• Extracting fumes and vapours• Cooling apparatus and machinery parts• Ventilation of rooms• Forced air supply for gas, oil and coal fi red systems• Drying parts of various size and composition• Supplementary cooling of electric machines
CFL
CENTRIFUGAL LOW PRESSURE FANS
43.500
3.000
2.500
2.000
1.500
1.000
500
0
Tota
l pre
ssur
e di
ffer
ence
Δpt
(Pa)
0 10.000 20.000 30.000 40.000 50.000 60.000 70.000 80.000 90.000 100.000Volumetric flow rate V (m³/h)
.
02.0
9/02
CENTRIFUGAL MEDIUM PRESSURE FANS
CFM
CFM rangeRectangular casing welded from mild steel, impellers unilaterally sucking with welded, backward-bent circular arch vanes from steel. Low-maintenance squirrel cagemotors to IP 55. The fans can be supplied in clockwise or anti-clockwise rotation. Direct driven with conventional motor B3 or fl ange motor B5, belt driven with base frame. Variable execution, 2-step speed variable, stepless by fre-quency converter. A variety of accessories like, connectors, inspection door, drainage plug etc.Special fans for specifi c applications, e.g. for higher media fl ow and ambient temperatures, with improved corrosion protection, with sealed housing parts, for special voltage and frequency.
Applications• Conveying of high air volumes at higher system resistance• Ventilation of installations with higher system resistance• Air supply for drying installations• Ventilation of rooms/buildings• Air supply for fi lters and dust extraction
56.000
5.000
4.000
3.000
2.000
1.000
0
Tota
l pre
ssur
e di
ffer
ence
Δpt
(Pa)
0 20.000 40.000 60.000 80.000 100.000 120.000Volumetric flow rate V (m³/h)
.
02.0
9/02
CENTRIFUGAL HIGH PRESSURE FANS
CFH rangeRectangular casing welded from mild steel, impellers unilaterally sucking with welded, backward-bent circular arch vanes from steel. Low-maintenance squirrel cage mo-tors to IP 55. The fans can be supplied in clockwiseor anti-clockwise rotation. Direct driven with contentional motor B3 or fl ange motor B5, belt driven with base frame. Variable execution, 2-step speed variable, stepless by fre-quency converter. A variety of accessories like, connectors, inspection door, drainage plug etc.Special fans for specifi c applications, e. g. for higher media fl ow and ambient temperatures, with improved corrosion protection, with sealed housing parts, for special voltage and frequency.
Applications• Conveying of high volumes at higher system resistance• Vacuum operation• Forced air supply for gas, oil and coal fi red systems• Air supply for drying installations
CFH
610.000
9.000
8.000
7.000
6.000
5.000
4.000
3.000
2.000
1.000
0
Tota
l pre
ssur
e di
ffer
ence
Δpt
(Pa)
0 20.000 40.000 60.000 80.000 100.000 120.000Volumetric flow rate V (m³/h)
.
02.0
9/02
CFXH
CENTRIFUGAL EXTREM HIGH PRESSURE FANS
CFXH rangeRectangular casing welded from mild steel, impellers uni-laterally sucking with welded, backward-bent circulararch vanes from steel. Low-maintenance squirrel cage motors to IP 55. The fans can be supplied in clockwiseor anti-clockwise rotation. Direct driven with contentionalmotor B3 or fl ange motor B5, belt driven with base frame.Variable execution, 2-step speed variable, stepless byfrequency converter. A variety of accessories as connec-tors, inspection door , drainage plug etc.Special fans for specifi c applications, e. g. higher media fl ow and ambient temperatures, with improved corrosionprotection, with sealed housing parts, for special voltage and frequency.
7
Applications• Conveying of high air volumes at very high system resistance• Air tube conveying• Cooling of Power station• Ventilation of rooms/buildings
16.000
14.000
12.000
10.000
8.000
6.000
4.000
2.000
0
Tota
l pre
ssur
e di
ffer
ence
Δpt
(Pa)
0 20.000 40.000 60.000 80.000 100.000 120.000Volumetric flow rate V (m³/h)
.
02.0
9/02
8
CFMT
CENTRIFUGAL CONVEYING FANS
Application• Conveying of plastic granules, plastic waste and lightweight bulk materials of all kind provided there is no operational risk.
CFMT rangeRectangular casing welded from mild steel, impellersunilaterally sucking with welded, backward-bent circulararch vanes from steel. Low-maintenance squirrel cagemotors to IP 55. The fans can be supplied in clockwise or anti-clockwise rotation. Direct driven with contentio-nal motor B3 or fl ange motor B5, belt driven with base frame.Variable execution, 2-step speed variable, stepless byfrequency converter. A variety of accessoires as connec-tors, inspection door, drainage plug etc.Special fans for specifi c applications, e. g. higher mediafl ow and ambient temperatures, with improved corrosionprotection, with sealed housing parts, for special voltage and frequency.
7.000
6.000
5.000
4.000
3.000
2.000
1.000
0
Tota
l pre
ssur
e di
ffer
ence
Δpt
(Pa)
0 5.000 10.000 15.000 20.000 25.000 30.000 35.000Volumetric flow rate V (m³/h)
.
02.0
9/02
MAFAXIAL MEDIUM PRESSURE FANS
up to 168.500 m³/h and 1.350 Pa
Page 10
MAFRAXIAL ROOF FANS
up to 67.000 m³/h and 1.100 Pa
Page 12
MAFWAXIAL WALL FANS
up to 52.000 m³/h and 860 Pa
Page 14
HAFCAXIAL HIGH PRESSURE FANS
up to 145.000 m³/h and 5.200 Pa
Page 11
MAFGAXIAL GARAGE FANS
up to 168.500 m³/h and 2.600 Pa
Page 13
9
OVERVIEW AXIAL FANS
02.0
9/02
MAF
AXIAL MEDIUM PRESSURE FANS
MAF rangeCasing of sheet-steel hot dip galvanized or painted with welded fl anges. Impellers made from aluminium or plastic.Low-maintenance squirrel cage motors to IP 55. The fans can be supplied in clockwise, anti-clockwise rotation or reversible.Direct driven with conventional foot motor B3. Variable execution, 2-step speed variable, stepless by frequency converter. A variety of accessories like connectors, feet, dampers etc.Special designs for specifi c applications, e. g. for highermedia fl ow and ambient temperatures, with improvedcorrosion protection, with sealed housing parts, for spe-cial voltage and frequency.
10
Applications• Conveying of high air volumes at low and medium system resistance• Extracting fumes and vapours• Cooling apparatus and machinery parts• Ventilation of rooms• Forced air supply for gas, oil and coal fi red systems• Drying parts of various size and composition• Supplementary cooling of electric machines
1.600
1.400
1.200
1.000
800
600
400
200
0
Tota
l pre
ssur
e di
ffer
ence
Δpt
(Pa)
0 20.000 40.000 60.000 80.000 100.000 120.000 140.000 160.000 180.000Volumetric flow rate V (m³/h)
.
02.0
9/02
11
HAFC
AXIAL HIGH PRESSURE FANS
Applications• Conveying of high air volumes at higher system resistance• Ventilation of installations with higher system resistance• Air supply for drying installations• Ventilation of rooms/buildings
HAFC rangeCasing of sheet-steel hot dip galvanized or painted with welded fl anges.Impellers made from aluminium or plastic.Low-maintenance squirrel cage motors to IP 55. The fans are contra rotating in series with two impellers and two motors. Direct driven with conventional foot motor B3. Variable execution, 2-step speed variable, stepless by frequency converter. A variety of accessories like, connec-tors, feet, dampers etc.Special fans for specifi c applications, e.g. for higher media fl ow and ambient temperatures, with improved corrosion protection, with sealed housing parts, for special voltage and frequency.
6.000
5.000
4.000
3.000
2.000
1.000
0
Tota
l pre
ssur
e di
ffer
ence
Δpt
(Pa)
0 20.000 40.000 60.000 80.000 100.000 120.000 140.000 160.000Volumetric flow rate V (m³/h)
.
02.0
9/02
MAFR
AXIAL ROOF FANS
MAFR rangeCasing of sheet steel hot dip galvanized or painted with welded fl anges.Impellers from aluminium or plastic . The mushroom-shaped roof hood and the base plate are also made from hot dip galvanized or painted sheet steel. Low-maintenance squirrel cage motors to IP 55. Direct driven with foot motor B3. Variable execution, 2-step speed variable, stepless by frequency converter.
12
Application• Exhaustion of the air from halls/buildings
1.200
1.000
800
600
400
200
0
Tota
l pre
ssur
e di
ffer
ence
Δpt
(Pa)
0 10.000 20.000 30.000 40.000 50.000 60.000 70.000 80.000Volumetric flow rate V (m³/h)
.
02.0
9/02
13
MAFG
AXIAL GARAGE FANS
Applications• Ventilation of garages• Ventilation of rooms/buildings• Exhaustion of gases and vapors
MAFG rangeTwo fans connected in series with a fl ow straightener.Casing of sheet steel hot dip galvanized or painted with welded fl anges. Impellers made from aluminium or plastic. Low-mainte-nance squirrel cage motors to IP 55. Direct driven with contentional foot motor B3.Variable execution, 2-step speed variable, stepless by frequency converter. A variety of accessories like, connec-tors, feet, dampers etc.Special fans for specifi c applications, e. g. for higher media fl ow and ambient temperatures, with improved corrosion protection, with sealed housing parts, for spe-cial voltage and frequency.
3.000
2.500
2.000
1.500
1.000
500
0
Tota
l pre
ssur
e di
ffer
ence
Δpt
(Pa)
0 20.000 40.000 60.000 80.000 100.000 120.000 140.000 160.000 180.000Volumetric flow rate V (m³/h)
.
02.0
9/02
MAFW
AXIAL WALL FANS
MAFW rangeWall plate made from plastic with screwed in motor suspension in wire guard.Protected against accidental contact by wire guard on the motor side according to DIN EN294.Impeller from aluminium or plastic infi nitely adjustable when at rest.Low-maintenance squirrel cage motors to IP 55. Direct driven with fl ange motor B5.
14
Application• Cooling of damp register
1.000
900
800
700
600
500
400
300
200
100
0
Tota
l pre
ssur
e di
ffer
ence
Δpt
(Pa)
0 10.000 20.000 30.000 40.000 50.000 60.000Volumetric flow rate V (m³/h)
.
02.0
9/02
15
FOR YOUR NOTES
Elektror airsystems gmbh
Hellmuth-Hirth-Str. 2
D-73760 Ostfi ldern
Tel. +49 711 31973-0
Fax +49 711 31973-5000
info@elektror.com
www.elektror.com
Elektror airsystems sp. z o.o.
ul. Hagera 24B
PL-41-800 Zabrze
Tel. +48 32 277 65 65
Fax +48 32 277 65 61
sprzedaz@elektror.com
www.elektror.pl
7015
40 0
2.09
/02
PRODUCT REVIEW
STEELINDUSTRIALFANS
Centrifugal Fans
Axial Fans
top related