pulsed arc electrohydraulic discharge stimulation of coal seam … a1... · uq-ccsg centre for coal...
Post on 04-Apr-2020
3 Views
Preview:
TRANSCRIPT
UQ-CCSGCentre for Coal Seam Gas
Pulsed Arc Electrohydraulic Discharge Stimulation of Coal Seam Interburdenfor Gas Development
Research team: Fei Ren1,2, Victor Rudolph1, Huilin Xing2,Tom Rufford1, Lei Ge1 1 School of Chemical Engineering, 2 School of Earth Sciences
Background & ObjectivesInterburden is the mixture layer located between the coal measures.Many existing coalbed methane (CBM) wells have already drilledthrough these undeveloped layers (Fig. 1). However, the potential ofcoal seam interburden reservoirs (Fig. 2), mainly consisting of mud,clay and organic matter, has not yet been well researched ordeveloped, when compared to that of coal or shale. This project aimsto develop and validate an alternative stimulation method to replacetraditional fracturing techniques, such as hydraulic fracturing, toeffectively crack the thick but malleable mudstone layers withoutimporting any outside chemical fluids into the subsurface or causingclay swelling, to improve the gas recovery from CBM wells.
Properties of Coal Seam Interburden
1. Interburden mainly consists of clay mineral and organic matterwhich are relevant to its pore structure and gas adsorption ability
2. The mechanical strength of interburden affects the PAEDstimulation design and parameter settings
Fig. 4 Schematic of PAED setup for interburden stimulation
ResultsExperimental Setup for PAED StimulationDevelop and employ PAED stimulation technique to crack the interburdenspecimens at the labscale. The schematic of PAED setup is shown in Fig. 4
Fig. 3 Microscopy and SEM of interburden sample from Surat Basin
Fig. 2 A typical layout of coal formation
Testing Sample Information Organic matter
Inorganic mineral
The rationale of PAED stimulation is that two underwater copper electrodes are connected with a set of capacitor banks charged with a high voltage. When the circuit is switched on, a plasma is generated between the electrodes reaching temperatures of thousands of K, resulting in a compressive pressure pulse, the strong pulse/shockwave will propagate in the water and crack the interburden specimen nearby (Fig. 5).
Coaxial-cable
D
Control Board
50HZ240V
High voltage transformer
Tap waterElectrodes
Core flooding rig with rock sample
Spark gap
R
L
C96.7mm
63.5mm
Shockwaves
Protection device
The assistance from the School of ITEE and CCSG at UQ is highly appreciated.
Acknowledgement & References
After the stimulation on C2 by PAED (Fig. 6), the permeability (Fig. 8) and porosity (Fig. 9) of testing C2 mortar specimen have both increased due to the impact of shock waves.
Shockwave generation:• Charging voltage: 20 ~60 KV• Capacitance: 2 ~ 12 uF• Discharging period: nanoseconds
~ 70 us• Pulse number: adjustable• Electrodes gap: 5 mmPermeability measurement:• Confining pressure: 20 bar• Inlet pressure : 2 bar• Outlet pressure : atmosphere
Fig. 5 Photograph of PAED testing setup
Time (s)
0 500 1000 1500 2000 2500
Per
mea
bilit
y (m
D)
0
5
10
15
20
25
C2 before PAED stimulationC2 after PAED stimulation
K= 16.01 ± 0.01 mD
K= 2.68 ±0.01 mD
Increase
Fig. 8 C2 permeability before and after PAED stimulation
Fig. 9 C2 porosity before and after PAED stimulation based on CT image
Kaolinite
Parameter settings for testing
In the current stage, to explore and summarize the most efficient discharging circuit and parameter settings for strong shock wave fracking, preliminary tests on homogeneous mortar sample and identified coal sample were carried out.The testing specimens here are C2 mortar with the compressive strength of approx. 6 MPa, Gluluguba-2 Coal from Surat Basin.
Depth (um)
0 2000 4000 6000 8000 10000 12000 14000 16000
Frac
ture
frac
tion
0.00
0.02
0.04
0.06
0.08
0.10
0.12
0.14
0.16
C2 before PAED stimulationC2 after PAED stimulation
Before PAED C2 porosity= 7.87%After PAED C2 porosity= 9.26 %
Increase
The CT scanning was utilized to analyse the fracture and void evolution before and after PAED stimulation on Gluluguba-2 coal (Fig. 7).
0 10000 20000 30000 40000
0.00
0.05
0.10
0.15
0.20
0.25
0.30
0.35
Frac
ture
frac
tion
Depth(um)
Before stimulation After stimulation
Fig. 10 CT image thresholding at the stimulation side of the coal core sample before (a) and after (b) stimulation (white: pores)
a
b
Fig. 11 Fracture fraction change with depth from stimulation side
The fracture and void of coal specimen after PAED stimulation have improved (Fig. 10), particularly the front part which is close to the shockwave source (Fig. 11).
The specimen section close to wave source
1.RUDOLPH V. et al. 2014. Mudstones as methane sources: stimulation and gas production from coal seam interburden. Project Proposal.2. SAGHAFI A. et al. 2010. Parameters affecting coal seam gas escape through floor and roof strata. 2010 Underground Coal Operators' Conference: 210-216.Fig. 6 Testing mortar samples made in lab Fig.7 Gluluguba-2 coal from Surat Basin
Sample info. : Surat BasinGluluguba-2 GD017Depth: 284 mWrapped-up by epoxy
Interburden
Interburden
Fig. 1 Schematic of a coalbed methane well
The project is structured around the following objectives:• Experimentally measure the coal seam interburden properties
relevant to gas development• Develop pulsed arc electrohydraulic discharge (PAED) and employ
it to enhance/improve interburden permeability• Understand the mechanism of interburden breakage by PAED and
simulate the multiphysics coupling using finite element method
CCSG A1 Posters 2016.indd 4 11/08/2016 4:46 PM
top related