pwd buildings division, alappuzha lmr as on...
Post on 13-May-2020
23 Views
Preview:
TRANSCRIPT
Code
No.
Description Unit Cherthala ,
Ambalapuzha,
Karthikapally
and Kuttanadu
Taluks
Mavelikara &
Chengannur
Taluks
1 day 1150 1150
2 day 1800 1800
3 day 4500 4500
4 cum 500 500
5 day 2300 2300
6 day 600 600
7 day 500 500
8 day 11000 11000
9 cum 210 210
10 day 1200 1200
11 day 1000 1000
12 day 800 800
13 day 500 500
14 day 7000 7000
16 Mastic Cooker day 1050 1050
17 day 4000 4000
18 day 6900 6900
19 day 500 500
20 day 12000 12000
21 Pin vibrator day 470 470
22 Surface Vibrator day 700 700
23 day 5800 5800
24 day 49700 49700
25 day 3000 3000
26 day 6200 6200
27 day 51450 51450
28 day 13000 13000
29 km/cum 45 45
30 Generator 250 KVA day 7200 7200
33 Paint applicator day 1000 1000
Hire and running charges of crane 20 tonne capacity
Hire and running charges of loader
Hand Grinder for mirror polish
Hydraulic Excavator (3D) with driver and fuel
PWD BUILDINGS DIVISION, ALAPPUZHA
0.1 HIRE CHARGES OF PLANTS
LMR as on 1.10.2014
Carriage of concrete by transit mixer
Hire and running charges of light crane
Hire and running charges of bentonite pump
Hire and running charges of vibrating pile driving hammer complete with
power unit and accessories
Hire charges of Barber green, drying, mixing and Asphalt Plant, with
accessories, capacity 30/45 tonne
Hire and running charges of hydraulic piling rig with power unit etc.
including complete accessories and shifting at site
Hire charges of Derrick monkey rope
Hire charges of Pump set of capacity 4000 litres/hour
Vibrator (Needle type 40 mm)
Machine for rubbing of floors
Hot Bitumen Mixer 0.5 cum i/c hand cart
Front end loader capacity 1.00 cum
Hire and running charges of tipper
Pumping charges of concrete including Hire charges of pump, piping
work & accessories etc.
Hire charges of Coaltar Sprayer
Hire charges of Coaltar Boiler 900 to 1400 litres
Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper
Hire charges of Diesel Road Roller - 8 to 10 tonne
Production cost of concrete by batch mix plant
Hire charges of Diesel Truck - 9 tonne
Hire charges of Spraying machine including electric charges
1
37 Mobile crane day 9000 9000
38 Tractor with ripper attachment day 1900 1900
39 Tractor with trolley day 2250 2250
40 day 2700 2700
41 Joint cutting machine with 2-3
blades
day 1500 1500
42 C.C .batch mix plant day 13800 13800
43 Road sweeper day 765 765
45 Slip form paver with sensor day 17900 17900
46 Water tanker 5000 litre day 1500 1500
47 Concrete joint cutting machine day 1500 1500
48 Texturing machine day 1300 1300
49 Dozer D-80-A 12 hour 3800 3800
50 Motor Grader 3.35 metre blade hour 3400 3400
51 Hydraulic Excavator of 1 cum
bucket
hour 1700 1700
52 hour 1250 1250
53 Tipper -5 Cum tonne km 5 5
54 Vibratory roller 8 to 10 tonne hour 2000 2000
55 Smooth Wheeled Roller 8 to 10
tonne
hour 650 650
56 Tandem Road Roller hour 1600 1600
57 Water Tanker 5 to 6 KL
capacity
hour 200 200
58 Air compressor hour 450 450
59 Wet Mix Plant 60 TPH hour 1700 1700
60 Mechanical Broom Hydraulic hour 500 500
61 hour 1100 1100
62 Hot mix Plant -120 TPH
capacity
hour 34600 34600
63 Hot mix Plant 100 TPH
Capacity
hour 25550 25550
64 hour 4000 4000
65 Paver finisher Mechanical 100
TPH
hour 1460 1460
66 hour 3600 3600
68 hour 4300 4300
69 Generator 250 KVA hour 900 900
70 Generator 100 KVA/125 KVA hour 700 700
71 Truck 5.5 cum/ 10 tonnes tonne km 4.00 4.00
75 hour 500 500
76 hour 19350 19350
actual output day 10350 10350
80
day 4000 4000
81 Pile Integrity testing equipment sqm 2000 2000
82 hour 2200 2200
Hire and running charges of drill machine up
to 400 mm dia(including cost of mobile oil, diesel
consumption in ordinary soil and operator)
Emulsion Pressure Distributor @ 1750 sqm
per hour
Paver finisher Hydrostatic with sensor
control 100 TPH
Excavation of Diaphragm wall by
Mechanical Grab
Air compressor 250 cfm with two leads for
pneumatic cutters / hammers
Note :- Above hire - charges include cost of
services of operating staff and supply of
Front end loader 1 cum bucket capacity (incl
POL)
Concrete Paver finisher with 40 HP Motor
and sensor
Batching and Mixing Plant @ 75 cum per
hour
Road sweeper (Mechamical Broom) @ 1250
sqm per hourDrum Type HMP of 60-90 TPH capacity @
75 tonne per hour
2
Batching and mixing plant 50-
20 m3 capacity
hour 3800 3800
HM plant 20-30TPH capacity day 3200 3200
Concrete mixer machine hour
Concrete pump of 45&30 m3
capacity
hour 280 280
Concrete Bucket day 20 20
80 80
day of rest
100 Bandhani day 700 700
101 Bhisti day 700 700
102 Blacksmith 1 st class day 850 850
103 Blacksmith 2nd class day 800 800
111 Carpenter 1 st class day 850 850
112 Carpenter 2nd class day 800 800
113 Chowkidar day 700 700
114 Beldar day 700 700
115 Coolie day 650 650
116 Fitter (grade 1) day 750 750
117 day 700 700
119 Glazier day 700 700
122 day 850 850
123 Mason (brick layer) 1 st class day 850 850
124 Mason (brick layer) 2nd class day 800 800
125 day 800 800
126 day 850 850
127 day 650 650
128 Mate day 800 800
130 Mistry day 750 750
131 Painter day 700 700
132 Rock Excavator day 800 800
133 Rock Breaker day 800 800
134 Rock Hole Driller day 800 800
135 Stone Chiseller day 750 750
138 Sprayer (for bitumen, tar etc.) day 1300 1300
139 day 700 700
141 White Washer day 700 700
155 Mason (average) day 800 800
156 Carpenter (average) day 800 800
157 Operator (Pile/ Special
machine)
day 1100 1100
159 Skilled torch operator for laying
tack
day 1300 1300
160 Technician day 1000 1000
161 Helper (Technician) day 800 800
Rent of country boat
Not included in the DSR
Driver (for Road Roller, Concrete Mixer, Truck etc.)
Skilled Beldar (for floor rubbing etc.)
0.2 LABOURNote :- These rates are exclusive of contractor's profit and over heads and are inclusive of
wages for weekly
Assistant Fitter or 2nd class Fitter
Mason (for plaster of paris work) 1 st class
Mason (for plain stone work) 2nd class
Mason (for ornamental stone work) 1 st class
3
Woodcutter day 1200 1200
Plumber day 750 750
Spl. Manmasdoor day 750 750
day 1000 1000
day 750 750
sales tax (VAT) etc.
222 10 Nos 57 57
223 sqm 357 357
224 metre 296 296
225 metre 296 296
226 metre 285 285
227 metre 423 423
228 metre 321 321
229 each 250 250
230 metre 439 439
231 each 587 587
232 metre 587 587
233 pair 235 235
234 each 785 785
235 each 367 367
236
board 6 mm thick sqm 291 291
237
board 8 mm thick sqm 357 357
285 cum 842 842
286 cum 842 842
287 cum 842 842
291 cum 1600 1550
292 cum 1600 1550
293 cum 1600 1550
294 cum 1550 1500
295 cum 1800 1700
296 cum 1550 1500
297 cum 1550 1500
298 cum 1600 1500
302 metre 56 56
303 Cowdung cum 71 71
304 Bajri cum 1581 1581
305 Bamboo 25 mm dia 2.5 metre
long
score 459 459
308 Bhusa quintal 663 663
309 tonne 71400 71400
310 Bitumen emulsion tonne 58089 58242
312 Bitumen grade PMB - 40 tonne 88485 88587
313
quality tonne 69870 69870
Heavy Load Manmasdoor
Electrician
Seam bolts and nuts 6 mm dia and 25 mm long
Fibre (high impact poly propelene reinforced) cement
corrugated sheet 6 mm thick Fibre (high impact poly propelene reinforced) cement
close fitting adjustable ridge Fibre (high impact poly propelene reinforced) cement
corrugate serrated adjustable ridge Fibre (high impact poly propelene reinforced) cement
plain wing adjustable ridge Fibre (high impact poly propelene reinforced) cement
unserrated adjustable ridge for hips Fibre (high impact poly propelene reinforced) cement
corrugated apron piece Fibre (high impact poly propelene reinforced) cement
eaves filler piece Fibre (high impact poly propelene reinforced) cement
north light curves Fibre (high impact poly propelene reinforced) cement
ventilator curves Fibre (high impact poly propelene reinforced) cement
barge boards 6 mm thick Fibre (high impact poly propelene reinforced) cement
ridge finial Fibre (high impact poly propelene reinforced) cement
special north light curves Fibre (high impact poly propelene reinforced) cement S
type louvers Multi purpose fibre (high impact poly propelene
reinforced) cement
Multi purpose fibre (high impact poly propelene
reinforced) cement
Brick Aggregate (Single size) : 63 mm nominal size
Brick Aggregate (Single size) : 50 mm nominal size
Brick Aggregate (Single size) : 40 mm nominal size
Stone Aggregate (Single size) : 63 mm nominal size
Stone Aggregate (Single size) : 50 mm nominal size
Stone Aggregate (Single size) : 40 mm nominal size
Stone Aggregate (Single size) : 25 mm nominal size
Stone Aggregate (Single size) : 20 mm nominal size
Stone Aggregate (Single size) : 12.5 mm nominal size
Stone Aggregate (Single size) : 10 mm nominal size
Stone Aggregate (Single size) : 06 mm nominal size
Safeda ballies 125 mm diameter
Paving bitumen of grade VG-10 of approved
quality
Blown type petroleum bitumen of penetration
85/25 of approved
Not included in the DSR
Note :- These rates are exclusive of contractor's profit, over heads and carriage but
include octroi, royalty, sales tax (VAT) etc.
0.3 MATERIALS
4
314 Bitumen hot sealing compound :
grade A
kilogram 36 41
316 litre 66 71
317 Premoulded joint filler 12 mm
thick
sqm 479 490
318 sqm 92 97
319 Bitumen felt as per IS 7193
Grade II
sqm 102 107
322 Bitumen felt :Type 3 grade 1 sqm 92 97
323
thick sqm 15 17
324 Coal Tar litre 39 42
325 Blasting powder kilogram 45 49
326 Blasting fuse (fuse wire) each 20 21
328 White face insulating board:12
mm thick
sqm 500 505
332 sqm 388 393
336 sqm 439 439
339
thick sqm 490 490
341
12 mm thick sqm 459 459
346
sqm 377 377
347
both sides sqm 245 245
348 sqm 694 694
349 Curing compound litre 65 65
362 Brick bats cum 694 704
364 Wire brush each 26 26
365 Soft brush each 26 26
367 Portland Cement tonne 7956 8038
368 White Cement tonne 20400 20502
369 sqm 41 41
370 Coal (steam) quintal 561 561
371 Sealant primer kg 163 163
373 Cramp Gun metal 25x6x300
mm
each 107 107
374 sqm 663 663
378 10 Nos 1285 1285
379 10 Nos 1173 1173
380 10 Nos 673 673
381 10 Nos 301 301
382 10 Nos 4911 4911
383 10Nos 4162 4162
384 10 Nos 1543 1543
385 10 Nos 4626 4626
386 10 Nos 4067 4067
387 10 Nos 3732 3732
388 10 Nos 2846 2846
389 each 428 428
Bitumen solution primer of approved quality
Bitumen felt fibre base (vegetable or
animal):As per IS 7193 Grade I
Separation Membrane of impermeable plastic
sheeting 125 micron
Natural colour insulating board:12 mm thick
Flame retardant face insulating board: 12 mm
thickFlame retardant face insulating, Impregnated
fibre board 12 mm
Flat pressed 3 layer particle board (medium
density) Grade 1,
Extra for veneered particle board with Teak
veneering on oneside and commercial veneering on other side
Extra for veneered particle board with
Commercial veneering on
Extra for veneered particle board with Teak
veneering both sides
Plastic sheath,1.25 mm thick for dowel bars
Pre moulded Joint filler, 25 mm thick for
expansion joint.Brass butt hinges (light/ordinary type) :
125x70x4 mmBrass butt hinges (light/ordinary type) :
100x70x4 mmBrass butt hinges (light/ordinary type) :
75x40x2.5 mmBrass butt hinges (light/ordinary type) :
50x40x2.5 mmBrass butt hinges (heavy type) : 125x85x5.5
mm(0.70 kg)Brass butt hinges (heavy type) : 100x85x5.5
mm(0.56 kg)Brass butt hinges (heavy type) :75x65x4.0
mm(0.20 kg)Brass parliamentary hinges 150x125x27x5
mmBrass parliamentary hinges 125x125x27x5
mmBrass parliamentary hinges 100x125x27x5
mmBrass parliamentary hinges 75x100x20x3.2
mmBrass single acting spring hinges 150 mm
5
390 each 398 398
391 each 275 275
392 each 816 816
393 each 612 612
394 each 510 510
400 each 372 372
401 each 296 296
402 each 240 240
403 each 153 153
404 Brass flush bolt 250 mm each 245 245
405 Brass flush bolt 150 mm each 204 204
406 Brass flush bolt 100 mm each 143 143
408 each 230 230
409 each 209 209
410 each 163 163
411 each 265 265
412 each 260 260
413
of brass lever handles each 561 561
414 each 520 520
417 each 245 245
418 10 Nos 1122 1122
419 10 Nos 1020 1020
420 10 Nos 969 969
421 10 Nos 918 918
422 10 Nos 898 898
423 Brass casement window fastener each 82 82
424
less than 0.33 kg each 219 219
425
less than 0.28 kg each 179 179
426
less than 0.24 kg each 163 163
427 Brass quadrant stays 300 mm each 203 203
428 Brass fanlight catch 10Nos 286 286
429 Brass fanlight pivot 10 Nos 316 316
430 Brass chain with hook for fan
light catch
each 65 65
431 10 Nos 1258 1258
432 10 Nos 1055 1055
433 10Nos 908 908
438 Brass night latch each 801 801
442 Brass helical spring 150 mm each 500 500
444 metre 184 184
445 metre 220 220
446 Brass brackets (curtain rods) 20
mm
each 66 66
447 each 57 57
449 Brass screws 50 mm 100 Nos 408 408
Brass single acting spring hinges 125 mm
Brass single acting spring hinges 100 mm
Brass double acting spring hinges 150 mm
Brass double acting spring hinges 125 mm
Brass double acting spring hinges 100 mm
Brass tower bolt (barrel type) 250x10 mm
Brass tower bolt (barrel type) 200x10 mm
Brass tower bolt (barrel type) 150x10 mm
Brass tower bolt (barrel type) 100x10 mm
Brass handles 125 mm with plate 175x32 mm
Brass handles 100 mm with plate 150x32 mm
Brass handles 75 mm with plate 125x32 mm
Brass door latch 300x16x5 mm (0.380 kg)
Brass door latch 250x16x5 mm (0.350 kg)
Brass mortice latch and lock 100x65 mm
with 6 levers and a pair
Brass mortice latch 100x65mm with a pair of
brass lever handlesBrass 150 mm floor door stopper (0.357kg)
Brass hard drawn hooks and eyes 300 mm
Brass hard drawn hooks and eyes 250 mm
Brass hard drawn hooks and eyes 200 mm
Brass hard drawn hooks and eyes 150 mm
Brass hard drawn hooks and eyes 100 mm
Brass casement stays (straight peg type) 300
mm weighing not
Brass casement stays (straight peg type) 250
mm weighing not
Brass casement stays (straight peg type) 200
mm weighing not
Brass hasps and staples (safety type) 150 mm
Brass hasps and staples (safety type) 115 mm
Brass hasps and staples (safety type) 90 mm
Brass curtain rod 20 mm dia 1.25 mm thick
Brass curtain rod 25 mm dia 1.25 mm thick
Brass cupboard knob or wardrobe knob 50
mm
6
450 Brass screws 40 mm 100 Nos 357 357
451 Brass screws 30 mm 100 Nos 286 286
452 Brass screws 25 mm 100 Nos 265 265
453 Brass screws 20 mm 100 Nos 245 245
524
(200gms) 10 Nos 1714 1714
525 10 Nos 1581 1581
526 10Nos 1208 1208
527 10Nos 796 796
528 10Nos 342 342
555 each 301 301
556 each 255 255
557 each 224 224
558
levers and a pair of brass lever
handles
each 933 933
568 each 165 165
569
mm weighing not less than 0.33
kg
each 259 259
570
mm weighing not less than 0.28
kg
each 224 224
571
mm weighing not less than 0.24
kg
each 199 199
583 Chromium plated Brass Night
latch
each 908 908
584 each 84 84
585 Chromium plated Brass screws
50 mm
100 Nos 408 408
586 Chromium plated Brass screws
40 mm
100Nos 347 347
587 Chromium plated Brass screws
30 mm
100 Nos 265 265
588 Chromium plated Brass screws
25 mm
100 Nos 204 204
589 Chromium plated Brass screws
20 mm
100 nos 184 184
590 metre 357 357
591 metre 408 408
592 metre 530 530
594
125x65x2.12 mm 10 Nos 204 204
595
100x58x1.90 mm 10Nos 128 128
596
75x47x1.70 mm 10 nos 92 92
597
50x37x1.50 mm 10 Nos 77 77
608
Chromium plated Brass butt hinges (heavy)
type 75x65x4 mm
Chromium plated Brass butt hinges
(light/ordinary) type 125x70x4mmChromium plated Brass butt hinges
(light/ordinary) type 100x70x4 mmChromium plated Brass butt hinges
(light/ordinary) type 75x40x2.5 mmChromium plated Brass butt hinges
(light/ordinary) type 50x40x2.5 mmChromium plated Brass handles 125 mm with
plate 175 x32 mmChromium plated Brass handles 100 mm with
plate 150 x 32 mmChromium plated Brass handles 75mm with
plate 125x32 mmChromium plated Brass mortice latch and
lock 100x65 mm with 6
Chromium plated brass casement window
fastenerChromium plated Brass casement stays
(straight peg type) 300
Chromium plated Brass casement stays
(straight peg type) 250
Chromium plated Brass casement stays
(straight peg type) 200
Chromium plated Brass Wardrobe Knob 50
mm
Chromium plated Brass curtain rod 12 mm
dia 1.25mm thickChromium plated Brass curtain rod 20 mm
dia 1.25mm thickChromium plated Brass curtain rod 25 mm
dia 1.25mm thickBright finished or black enameled mild steel
butt hinges
Bright finished or black enameled mild steel
butt hinges
Bright finished or black enameled mild steel
butt hinges
Bright finished or black enameled mild steel
butt hinges
Nickel plated bright finished mild steel piano
hinges 1 mm thick
7
25 mm wide metre 61 61
635 100 Nos 92 92
637 100 nos 71 71
638 100 nos 61 61
639 100 Nos 51 51
640 100 Nos 41 41
641
50x6 mm each 10 10
642 10 Nos 209 209
643 10 Nos 133 133
644 10 Nos 97 97
645 10 Nos 82 82
646 10 Nos 587 587
647 10 Nos 597 597
648 10 Nos 337 337
649 10 Nos 306 306
650 each 168 168
651 each 153 153
652 each 122 122
653 each 158 158
654 each 163 163
655 each 128 128
656 metre 61 61
660 each 133 133
661 each 133 133
662 each 66 66
663 each 56 56
664 each 61 61
665 each 56 56
666 each 41 41
667 each 36 36
668 Oxidised mild steel handles 125
mm
each 25 25
669 Oxidised mild steel handles 100
mm
each 26 26
670 Oxidised mild steel handles 75
mm
each 20 20
679 10 Nos 179 179
680 10 Nos 153 153
681 10 Nos 102 102
682 Oxidised mild steel screws 50
mm
100 Nos 102 102
683 Oxidised mild steel screws 40
mm
100 Nos 92 92
684 Oxidised mild steel screws 30
mm
100 Nos 71 71
685 Oxidised mild steel screws 25
mm
100 Nos 66 66
686 Oxidised mild steel screws 20
mm
100 Nos 51 51
687 10 Nos 1224 1224
Bright finished or black enameled mild steel
screws 50 mm
Bright finished or black enameled mild steel
screws 40 mmBright finished or black enameled mild steel
screws 30 mmBright finished or black enameled mild steel
screws 25 mm
Bright finished or black enameled mild steel
screws 20 mm
Bright finished or black enameled mild steel
bolts and nuts
Oxidised mild steel butt hinges 125x65x2.12
mmOxidised mild steel butt hinges 100x58x1.90
mmOxidised mild steel butt hinges 75x47x1.70
mmOxidised mild steel butt hinges 50x37x1.50
mmOxidised mild steel parliamentary hinges
150x125x27x2.8 mmOxidised mild steel parliamentary hinges
125x125x27x2.8 mmOxidised mild steel parliamentary hinges
100x125x27x2.8 mmOxidised mild steel parliamentary hinges
75x100x20x2.24 mmOxidised mild steel single acting spring
hinges 150 mmOxidised mild steel single acting spring
hinges 125 mmOxidised mild steel single acting spring
hinges 100 mmOxidised mild steel double acting spring
hinges 150 mmOxidised mild steel double acting spring
hinges 125 mmOxidised mild steel double acting spring
hinges 100 mmNickel plated mild steel piano hinges 1 mm
thick 35 mm wideOxidised mild steel sliding door bolt 300x16
mmOxidised mild steel sliding door bolt 250x16
mmOxidised mild steel door latch 300x20x6 mm
Oxidised mild steel door latch 250x20x6 mm
Oxidised mild steel tower bolt (barrel type)
250x10 mmOxidised mild steel tower bolt (barrel type)
200x10 mmOxidised mild steel tower bolt (barrel type)
150x10 mmOxidised mild steel tower bolt (barrel type)
100x10 mm
Oxidised mild steel hasps and staples (safety
type) 150 mmOxidised mild steel hasps and staples (safety
type) 115 mmOxidised mild steel hasps and staples (safety
type) 90 mm
Anodised Aluminium butt hinges 125x75x4
mm
8
688 10 Nos 1071 1071
689 10 Nos 1005 1005
690 10 Nos 995 995
691 10 Nos 995 995
692 10 Nos 979 979
693 10 Nos 964 964
694 10 Nos 887 887
696 each 255 255
697 each 204 204
698 10 Nos 1632 1632
699 10 Nos 1499 1499
700 10 Nos 1346 1346
701 10 Nos 1295 1295
702 10 Nos 1163 1163
703 10 Nos 867 867
704 10 Nos 597 597
705 10 Nos 500 500
706 each 189 189
713 sqm 2530 2530
714 sqm 2244 2244
715 sqm 2111 2111
717 sqm 1693 1693
718 sqm 1479 1479
719 sqm 1352 1352
752 sqm of 439 439
door area
753 sqm of 168 168
door area
754 sqm of 265 265
door area
755 sqm of 454 454
door area
757 sqm of 122 122
door area
759 Decorative plywood 4 mm sqm 643 643
761 Fuel wood quintal 780 780
763 Glue kilogram 97 97
765 Hessian cloth sqm 61 61
768 Cement Concrete Jali 50 mm
thick
sqm 296 296
769 Cement Concrete Jali 40 mm
thick
sqm 250 250
770 Cement Concrete Jali 25 mm
thick
sqm 204 204
771 Kerosene oil litre 71 71
773 Unslaked lime quintal 418 418
775 Dehradun white lime quintal 908 908
Anodised Aluminium butt hinges 125x63x4
mmAnodised Aluminium butt hinges 100x75x4
mmAnodised Aluminium butt hinges
100x63x3.2 mmAnodised Aluminium butt hinges 100x63x4
mmAnodised Aluminium butt hinges 75x63x4
mmAnodised Aluminium butt hinges 75x63x3.2
mmAnodised Aluminium butt hinges 75x45x3.2
mmAnodised Aluminium sliding door bolt
300x16 mmAnodised Aluminium sliding door bolt
250x16 mmAnodised Aluminium tower bolt (barrel type)
300x10 mmAnodised Aluminium tower bolt (barrel type)
250x10 mmAnodised Aluminium tower bolt (barrel type)
200x10 mmAnodised Aluminium tower bolt (barrel type)
150x10 mmAnodised Aluminium tower bolt (barrel type)
100x10 mmAnodised Aluminium handles 125 mm with
plate 175 x 32 mmAnodised Aluminium handles 100 mm with
plate 150 x 32 mmAnodised Aluminium handles 75mm with
plate 125 x 32 mmAnodised Aluminium kicking plate 50 cm
long 100x3.15 mmBlock board construction flush door with
teak wood ply on both faces 35 mm thickBlock board construction flush door with
teak wood ply on both faces 30 mm thickBlock board construction flush door with
teak wood ply on both faces 25 mm thickBlock board construction flush door with
commercial ply on both faces 35 mm thickBlock board construction flush door with
commercial ply on both faces 30 mm thickBlock board construction flush door with
commercial ply on both faces 25 mm thickBlock board construction flush door lipping
Square vision panel in Block board
construction flush door
Circular vision panel in Block board
construction flush door
Decorative type louvers in Block board
construction flush door
Rebate cutting in block board construction
flush door
9
776 Satna lime quintal 704 704
777 Dry hydrated lime (factory
made)
quintal 321 321
784 Marble dust/ powder cum 1408 1408
785 quintal 306 306
788 quintal 306 306
801 Silicon and acrylic emulsion litre 306 306
802
50 grams/ litre Kg 61 61
803 litre 561 561
804
less than 50 grams/ litre litre 740 740
805
content less than 150 grams/
litre
litre 408 408
806
litre 189 189
807
VOC content less than 250
grams/ litre
litre 194 194
808
VOC content less than 50
grams/ litre
litre 153 153
809 Exterior primer kilogram 61 61
810 Moorum cum 632 632
811 Mud (dry) cum 97 97
815 Dry distemper kilogram 51 51
816 kilogram 77 77
818 Linseed oil (double boiled) litre 168 168
820 Cement primer litre 173 173
821 Distemper primer litre 138 138
823 Pink primer (for wood) litre 138 138
824 White cement based putty kg 36 36
826 Aluminium paint litre 240 240
827 Acid proof paint (chocolate or
black)
litre 281 281
828 Anticorrosive bituminous paint
(black)
litre 163 163
829 Black Japan paint litre 163 163
830 Enamel paint litre 286 286
831 litre 204 204
833 litre 250 250
834 litre 224 224
835 Plastic emulsion paint litre 306 306
845 litre 179 179
850 White lead kilogram 209 209
851 Water proofing cement paint kilogram 61 61
855 Wax polish (ready made) kilogram 367 367
Marble chips up to 4 mm and down size
White & blackMarble chips large size above 4 mm White &
black
Acrylic distemper 1st quality , having VOC
content less than
Acrylic emulsion , having VOC content less
than 50 grams/ litrePremium acrylic emulsion of interior grade,
having VOC content
Synthetic enamel paint , having VOC
(Volatile Organic Compound)
Ready mixed pink or grey primer on wood
work (hard and softwood) having VOC content less than 50
grams/ litreReady mixed red oxide zinc chromatic on
steel/ iron work, having
Water thinnable cement primer for interior
wall surface, having
Oil bound washable distemper/ Acrylic
distemper
Floor enamel paint in all shades except green
Synthetic enamel paint in black or chocolate
shadeSynthetic enamel paint in all shades except
black or chocolate shade
Roofing paint for iron sheets in red colour
10
856 Ordinary varnish litre 138 138
857 Superior copal varnish litre 265 265
858 Superior spar varnish litre 265 265
859 Oil type wood preservative litre 209 209
863 Putty for wood work kilogram 41 41
865 Pig lead kilogram 168 168
868 Premixed super white gypsum
plaster.
kg 10 10
869 Plaster of Paris kilogram 7 7
870 Plug each 15 15
873 Copper pins 6 mm dia 7.5 cm
long
each 15 15
874 Black colour dark shade
pigment
kilogram 77 77
875
shade pigment kilogram 102 102
876 Green or blue medium shade
pigment
kilogram 92 92
886
150 mm dia each 41 41
966 Sand Cast iron plain shoe 150
mm dia
each 434 434
967 Copper plate kilogram 377 377
969 Pulley 25 mm dia each 56 56
973 sqm 2244 2244
974 metre 1224 1224
975 each 393 393
976 Ball bearing for rolling shutters each 464 464
977 sqm 842 842
sqm area of door
978 sqm 842 842
979 Royalty for good earth cum 46 44
980 Royalty for sludge cum 122 122
982 Coarse sand (zone III) cum 1785 1770
983 Fine sand (zone IV) cum 1040 1035
992 Galvanised steel plain sheets quintal 7528 7528
994 sqm 173 173
996 sqm 204 204
999 Shellac kilogram 449 449
1000 Spirit litre 97 97
1001 Spun yarn kilogram 51 51
1002 quintal 6630 6681
1003 Mild steel round bar above 12
mm dia
quintal 6589 6630
1004 quintal 6324 6334
Red, chocolate, orange, buff or yellow (red
oxide of iron) light
Standard holder bat clamps for sand cast iron
or cast iron pipes
Rolling shutter made of 80x1.25 mm
machine rolled lathsTop cover for rolling shutters 1.25 mm thick
27.5 cm long wire spring grade No. 2 for
rolling shutters
Extra for mechanical devices chain and
cranked operation foroperating rolling shutters: exceeding 10.00
sqm and up to 16.80
Extra for mechanical devices chain and
cranked operation foroperating rolling shutters: exceeding 16.80
sqm area of door
Standard quality hard board sheet 3 mm thick
Standard quality hard board sheet 4.5 mm
thick
Mild steel round bar 12 mm dia and below
Average rate of Mild steel round bars for
reinforcement
11
1005 Twisted steel/ deformed bars quintal 6936 7058
1006 Mild steel square bars quintal 6712 6732
1007 quintal 6528 6528
1008 Flats up to 10 mm in thickness quintal 6273 6324
1009 Flats exceeding 10 mm in
thickness
quintal 6401 6416
1010 Mild steel plates quintal 6324 6334
1011
K11 and K12B etc. kg 71 71
1013 Mild steel sheets for tanks quintal 7038 7038
1015 sqm 418 418
1019 Mild steel hooks each 46 46
1020 Mild steel rivets quintal 7313 7319
1021 Hard drawn steel wire fabric sqm 612 622
1022
head with slots 10 Nos 36 36
1023 Galvanised steel J or L hooks 8
mm dia
10 Nos 163 163
1024
head with slots each 17 17
1025 10 Nos 45 45
1028 Straining bolts each 97 97
1029 Galvanised steel barbed wire quintal 7319 7319
1030 Galvanised steel turn buckles each 26 26
1031
each 36 36
1032 each 29 29
1034 Bolts and nuts up to 300 mm in
length
quintal 8670 8670
1035 Bolts and nuts above 300 mm in
length
quintal 8160 8160
1036 Iron pintels including welded
pin
each 56 56
1143 Steel beading metre 36 36
1145 metre 138 138
1149 Glass strip 4 mm thick 40 mm
deep
metre 26 26
1151 each 112 112
1154 Through and bond stone 100 Nos 1826 1831
1157 Stone for masonry work cum 1632 1612
1158 Stone for pitching 15 cm x 22.5
cm
cum 714 694
1159 Stone dust cum 1545 1515
1160 Red sand stone block 10
cudm
97 97
1161 White sand stone block 10
cudm
102 102
1163 sqm 418 495
1164 sqm 245 255
1165 sqm 270 281
1166 sqm 270 281
1168 sqm 408 423
Structural steel such as tees, angles channels
and R.S. joists
Steel glazed door,window/ ventilator, all
members viz. F7D, F4B,
Mild steel expanded metal 20x60 mm strands
Galvanised steel bolts & nuts 6 mm dia and
25 mm long round
Galvanised steel bolts & nuts 10 mm dia and
125 mm long round
Mild steel bolts 6 mm dia and 25 mm long
with hexagonal head
Galvanised steel bolts & nuts 10 mm dia and
27 cm long bothsides threaded with 4 galvanised steel nuts
Galvanised steel bolts 10 mm dia and 7 cm
long with nuts
Aluminium Plain Strip edging 38x12x3 mm
Boundary stone top chisel dressed 15x15x90
cm
White sand stone slab 75 mm thick (un-
dressed)Red sand stone slab 40 mm thick (un-
dressed)White sand stone slab 40 mm thick (un-
dressed)Red sand stone slab 30 mm thick (un-
dressed)Kota stone slab 20 mm to 25 mm thick (semi-
polished)
12
1169 sqm 490 510
1174 sqm 240 245
1175 sqm 306 311
1177 cum 1591 1601
1179 cum 1530 1545
1182 Surkhi cum 969 984
1186
in planks 10
cudm
1836 1851
1187 First class teak wood in
scantling
10
cudm
1387 1423
1188 First class teak wood in planks 10
cudm
1479 1566
1189 Second class teak wood in
scantling
10
cudm
1142 1122
1190 Second class teak wood in
planks
10
cudm
1250 1173
1194 Second class deodar wood in
planks
10
cudm
862 765
1196 First class kail wood in planks 10
cudm
535 500
1197 Second class kail wood in
scantling
10
cudm
449 439
1198 Second class kail wood in
planks
10
cudm
449 439
1199 Sal wood in scantling 10
cudm
897 867
1200 10
cudm
1122 1122
1201 sqm 490 495
1202 sqm 408 418
1203 sqm 408 418
1204
20 mm thick sqm 653 668
1207 G.I. Limpet washer 100 nos 46 49
1208 Bitumen washer 100 Nos 38 42
1209 G.I. plain washer thick 100 Nos 45 49
1210 G.I. plain washer thin 100 Nos 41 45
1211 G.I. plain washer for seam bolts 100Nos 39 42
1213 Water proofing materials kilogra
m
153 153
1214 Welding by gas plant cm 3 3
1215 Welding by electric plant cm 3 3
1216 Whiting quintal 836 842
1219 Wire nails kilogram 97 99
1220 Wire mesh (rabbit) sqm 66 66
1221 20 mm dia holding down bolts quintal 8364 8446
1222 each 179 179
1224 Hard drawn steel wire quintal 7742 7742
Kota stone slab 25mm thick (rough chiseled)
Red sand stone slab 45 mm to 50 mm thick
(un-dressed)White sand stone slab 45 mm to 50 mm thick
(un-dressed)Stone grit 6 mm and down size or pea sized
gravelCrushed stone 2.36 mm to 12.5 mm size
Superior class teak wood such as Dandeli,
Balarshah or Malabar
Kiln seasoned selected sheesham wood
planks
Precast terrazzo tiles 22 mm thick (light
shade)Precast terrazzo tiles 22 mm thick(medium
shade)Precast terrazzo tiles 22 mm thick (dark
shade)Precast heat resistant terrace tiles (size
300x300 mm) and
Mild steel sheets with bolts and nuts to rest
on pintels
13
1225 Mild steel flat strap fitting quintal 7038 7038
1227 sqm 388 388
1228 sqm 408 418
1229 sqm 357 362
1231 10 cudm 204 209
1234 metre 184 189
1235 Diesel oil litre 71 77
1237
mechanical device metre 14 14
1238 10 cudm 204 209
1239 sqm 2754 2805
1240
0.5 sqm). sqm 5059 5064
1241 Commercial LPG in cylinder kg 117 122
1242 sqm 1693 1688
1243 Tile fixing chemical adhesive kg 46 46
1244 Cement Polymer Grout
Compound
kg 46 46
1245 Acid for cleaning tiles litre 26 26
1301 Bleaching powder quintal 2621 2621
1304 Surface box for stop cock each 173 173
1305 Surface box for sluice valve each 296 296
1307 Surface box for water meter each 352 352
1309 C.I. bracket for wash basin and
sinks
pair 122 122
1314 each 102 102
1315 each 87 87
1330 each 46 49
1331 each 29 29
1332 each 25 25
1334 each 37 37
1335 each 40 40
1336 each 61 61
1337 each 66 66
1339 Brass bib-cock 15 mm dia each 490 490
1340 Brass bib-cock 20 mm dia each 428 428
1342 Brass stop-cock 15 mm dia each 490 490
1343 Brass stop-cock 20 mm dia each 561 561
1350 each 41 41
1352 C.I. cover and frame 300x300
mm inside
each 408 408
1353 each 311 311
1354 each 2111 2111
1355 each 1408 1408
1356 each 6686 6686
1357 each 3233 3233
1360 C.I.mouth, brass ferrule 15 mm
dia
each 194 194
1361 C.I.mouth, brass ferrule 20 mm
dia
each 219 219
Chequered terrazzo tiles 22 mm thick(light
shade)Chequered terrazzo tiles 22 mm
thick(medium shade)Chequered terrazzo tiles 22 mm thick (dark
shade)Extra for selected planks of second class
teakwood
Aluminium Plain Strip edging 57x12x3 mm
Cutting marble or sand stone slab up to 50
mm thick by
Extra for selected planks of first class
teakwood
18 mm thick Flamed finish granite stone slab
18 mm thick Italian Marble stone slab,
Perlato (slab area up to
Glass mossaic tiles (20 mm x 20 mm x 4 mm
).
C.P.brass chain with 32 mm dia rubber plug
C.P.brass chain with 40 mm dia rubber plug
Clamps and M.S. stays including bolts and
nuts for 100 mm pipeM.S.Holder bat clamp of approved design for
100 mm S.C.I. pipeM.S.Holder bat clamp of approved design
for75 mm S.C.I. pipeClamps and M.S. stays including bolts and
nuts for 50 mm pipeClamps and M.S. stays including bolts and
nuts for 75 mm pipeClearing eye with chain and lid 100 mm dia
Clearing eye with chain and lid 150 mm dia
Mosquito proof coupling of approved design
C.I.cover without frame 300x300 mm inside
i/c cover of 4.50 kgRectangular cover 455x610 mm with frame
(low duty)Rectangular cover 455x610 mm without
frame (low duty)500 mm dia cover with frame (medium duty)
500 mm dia cover without frame (medium
duty)
14
1362 C.l.mouth, brass ferrule 25 mm
dia
each 306 306
1363 pair 138 138
1364 C.I. grating 100x100 mm each 46 46
1366 C.I. grating 150x150 mm each 58 58
1367 C.I. grating 180x180 mm each 41 41
1369 each 26 26
1373 each 26 26
1374 each 26 26
1375 each 31 31
1376 each 31 31
1377 each 36 36
1378 each 56 56
1379 each 76 76
1380 each 71 71
1381 each 102 102
1382 each 138 138
1383 each 153 153
1384 each 168 168
1392 Mirror of superior make glass
60x45 cm
each 418 418
1396 Vitreous china pedestal for wash
basin
each 1000 1000
1397 Pig lead kilogram 122 122
1464 quintal 4845 4845
1466 quintal 5212 5212
1468 quintal 7752 7752
1470 quintal 8160 8160
1472 Casing pipe 100 mm dia metre 474 474
1532
single stall each 377 377
1533
double stall each 566 566
1534
range of three stall each 734 734
1535
range of four stall each 852 852
1540
urinal each 250 250
1541 each 367 367
1542 each 434 434
1543 each 541 541
1545 G.I. pipes 15 mm dia metre 153 153
1546 G.I. pipes 20 mm dia metre 184 184
1547 G.I. pipes 25 mm dia metre 224 224
1548 G.I. pipes 32 mm dia metre 240 240
1549 G.I. pipes 40 mm dia metre 316 316
1550 G.I. pipes 50 mm dia metre 337 337
1551 G.I. pipes 65 mm dia metre 459 459
1552 G.I. pipes 80 mm dia metre 648 648
Vitreous china foot rests 250x130x30 mm
S.C.I. gully or nahani grating 100 mm dia
Rubber insertions for 80 mm dia pipe joints
Rubber insertions for 100 mm dia pipe joints
Rubber insertions for 125 mm dia pipe joints
Rubber insertions for 150 mm dia pipe joints
Rubber insertions for 200 mm dia pipe joints
Rubber insertions for 250 mm dia pipe joints
Rubber insertions for 300 mm dia pipe joints
Rubber insertions for 350 mm dia pipe joints
Rubber insertions for 400 mm dia pipe joints
Rubber insertions for 450 mm dia pipe joints
Rubber insertions for 500 mm dia pipe joints
Rubber insertions for 600 mm dia pipe joints
S & S.C.I. standard specials upto 300 mm dia
(heavy class)S & S.C.I. standard specials over 300 mm dia
(heavy class)Flanged C.I. standard specials upto 300 mm
dia (heavy class)Flanged C.I. standard specials over 300 mm
dia (heavy class)
Flush pipe with union spreaders and clamps
all in C.P. brass for
Flush pipe with union spreaders and clamps
all in C.P. brass for
Flush pipe with union spreaders and clamps
all in C.P. brass for
Flush pipe with union spreaders and clamps
all in C.P. brass for
Flush pipe and spreaders G.l. for single set of
one squatting plate
Flush pipe and spreaders G.l. for range of
two squatting plates urinalFlush pipe and spreaders G.l. for range of
three squatting plates urinalFlush pipe and spreaders G.l. for range of
four squatting plates urinal
15
1555 G.I. back (jam) nuts 25 mm dia each 15 15
1559 G.I. back (jam) nuts 65 mm dia each 36 36
1608 G.I. tees (equal) 25 mm each 66 66
1612 G.I. tees (equal) 65 mm each 388 388
1614 G.I. inlet connection each 92 92
1616
75 mm dia each 1336 1336
1617
long: 100 mm dia each 1617 1617
1618
150 mm dia each 1750.00 2448 2448
1620 S.C.I. plain bend 75 mm dia each 240 240
1621 S.C.I. plain bend 100 mm dia each 490 490
1622 S.C.I. plain bend 150 mm dia each 842 842
1624 S.C.I. bend with access door 75
mm dia
each 275 275
1625 each 352 352
1627 each 357 357
1628 each 632 632
1630 each 383 383
1631 each 520 520
1633 each 490 490
1634 each 729 729
1636 each 587 587
1637
access door each 770 770
1639 Slotted cowl (terminal guard )
75 mm dia
each 204 204
1640 each 275 275
1641 G.I. Union 15 mm nominal bore each 77 77
1642 G.I. Union 20 mm nominal bore each 102 102
1643 G.I. Union 25 mm nominal bore each 117 117
1644 G.I. Union 32 mm nominal bore each 168 168
1645 G.I. Union 40 mm nominal bore each 255 255
1646 G.I. Union 50 mm nominal bore each 306 306
1647 G.I. Union 65 mm nominal bore each 561 561
1648 G.I. Union 80 mm nominal bore each 632 632
1649
arrangement per litre 6 6
1653
75 mm dia each 464 464
1656
dia with access door each 551 551
1659
S.C.I. soil, waste and vent single socketed
pipe 1.80 metres long:
S.C. I. soil, waste and vent single socketed
pipe 1.80 metres
S.C.I. soil, waste and vent single socketed
pipe1.80 metres long:
S.C.I. bend with access door 100 mm dia
S.C.I. plain single equal junctions 75x75x75
mm diaS.C.I. plain single equal junctions
100x100x100 mm diaS.C.I. single equal junctions 75x75x75 mm
dia with access doorS.C.I. single equal junctions 100x100x100
mm dia with access doorS.C.I. plain double equal junctions
75x75x75x75 mm diaS.C.I. plain double equal junctions
100x100x100x100 mm diaS.C.I. double equal junctions 75x75x75x75
mm dia with access doorS.C.I. double equal junctions
100x100x100x100 mm dia with
Slotted cowl (terminal guard) 100 mm dia
Polyethylene water storage tank with cover
and suitable locking
Sand cast iron S&S plain single unequal
junctions: 100x100x
Sand cast iron S&S single unequal junctions:
100x100x75 mm
Sand cast iron S&S plain double unequal
junctions:100x100x
16
75x75 mm dia each 775 775
1662
75x75 mm dia with access door each 765 765
1666 Sand cast iron heel rest bend 75
mm dia
each 316 316
1667 each 352 352
1669 each 454 454
1670
100 mm dia each 571 571
1672
75 mm dia each 571 571
1673
100x100 mm dia each 780 780
1674
75 mm dia each 699 699
1677
75 mm dia each 801 801
1682 S.C.I. door pieces 75 mm dia each 393 393
1683 S.C.I. door pieces 100 mm dia each 566 566
1685 S.C.I. collar 75 mm dia each 163 163
1686 S.C.I. collar 100 mm dia each 199 199
1687
15 mm bore each 41 41
1688
20 mm bore each 51 51
1689
15 mm bore each 51 51
1690
20 mm bore each 71 71
1693 S.C.I. hand pump each 949 949
1700 R.C.C. pipes NP2 class 100 mm
dia
metre 316 316
1701 R.C.C. pipes NP2 class 150 mm
dia
metre 321 321
1702 R.C.C. pipes NP2 class 250 mm
dia
metre 367 367
1703 R.C.C. pipes NP2 class 300 mm
dia
metre 434 434
1704 R.C.C. pipes NP2 class 450 mm
dia
metre 592 592
1705 R.C.C. pipes NP2 class 500 mm
dia
metre 836 836
1706 R.C.C. pipes NP2 class 600 mm
dia
metre 1341 1341
1707 R.C.C. pipes NP2 class 700 mm
dia
metre 1479 1479
1709 R.C.C. pipes NP2 class 800 mm
dia
metre 1709 1709
1710 R.C.C. pipes NP2 class 900 mm
dia
metre 1862 1862
1711 R.C.C. pipes NP2 class 1000
mm dia
metre 2397 2397
1712 R.C.C. pipes NP2 class 1100
mm dia
metre 2703 2703
Sand cast iron S&S double unequal
junctions: 100x100x
Sand cast iron heel rest bend 100 mm dia
S.C.I. single equal invert branch of required
degree 75x75x75 mm diaS.C.I. single equal invert branch of required
degree 100x100x
S.C.I. double equal invert branch of required
degree 75x75x75x
S.C.I. double equal invert branch of required
degree 100x100x
S.C.I. single unequal invert branch of
required degree 100x100x
S.C.I. double unequal invert branch of
required degree 100x100x75x
Unplasticised P.V.C. connection pipe with
brass union 30 cm long
Unplasticised P.V.C. connection pipe with
brass union 30 cm long
Unplasticised P.V.C. connection pipe with
brass union 45 cm long
Unplasticised P.V.C. connection pipe with
brass union 45 cm long
17
1713 R.C.C. pipes NP2 class 1200
mm dia
metre 2882 2882
1714 R.C.C. collars NP2 class 100
mm dia
each 49 49
1715 R.C.C. collars NP2 class 150
mm dia
each 53 53
1716 R.C.C. collars NP2 class 250
mm dia
each 80 80
1717 R.C.C. collars NP2 class 300
mm dia
each 86 86
1718 R.C.C. collars NP2 class 450
mm dia
each 158 158
1719 R.C.C. collars NP2 class 500
mm dia
each 179 179
1720 R.C.C. collars NP2 class 600
mm dia
each 219 219
1721 R.C.C. collars NP2 class 700
mm dia
each 224 224
1723 R.C.C. collars NP2 class 800
mm dia
each 306 306
1724 R.C.C. collars NP2 class 900
mm dia
each 347 347
1725 R.C.C. collars NP2 class 1000
mm dia
each 408 408
1726 R.C.C. collars NP2 class 1100
mm dia
each 464 464
1727 R.C.C. collars NP2 class 1200
mm dia
each 530 530
1728 RCC pipe 450 mm dia NP-3
spigot
metre 2157 2157
1729 RCC pipe 600 mm dia NP-3
spigot
metre 2887 2887
1730 RCC pipe 900 mm dia NP-3
spigot
metre 4646 4646
1731 RCC pipe 1000 mm dia NP-3
spigot
metre 5569 5569
1732 RCC pipe 1200 mm dia NP-3
spigot
metre 7364 7364
1733 RCC pipe 1800 mm dia NP-3
spigot
metre 15045 15045
1734 RCC pipe 450 mm dia NP-4
spigot
metre 2565 2565
1735 RCC pipe 600 mm dia NP-4
spigot
metre 3381 3381
1736 RCC pipe 900 mm dia NP-4
spigot
metre 6579 6579
1737 RCC pipe 1000 mm dia NP-4
spigot
metre 8017 8017
1738 RCC pipe 1200 mm dia NP-4
spigot
metre 9292 9292
1739 RCC pipe 1800 mm dia NP-4
spigot
metre 1938 1938
1854 each 71 71
1855 each 112 112
1856 each 189 189
1857 each 245 245
1858 each 316 316
1859 each 352 352
1863 Fire clay kitchen sink:
600x450x250 mm
each 2856 2856
1871 each 2499 2499
1872 each 2978 2978
1875
Stoneware pipes grade A (60 cm long) 100
mm diaStoneware pipes grade A (60 cm long) 150
mm diaStoneware pipes grade A (60 cm long) 200
mm diaStoneware pipes grade A (60 cm long) 230
mm diaStoneware pipes grade A (60 cm long) 250
mm diaStoneware pipes grade A (60 cm long) 300
mm dia
White vitreous china laboratory sink
450x300x150 mmWhite vitreous china laboratory sink
600x450x200 mmWhite plastic seat (solid) with lid C.P. brass
hinges and rubber
18
buffers each 495 495
1876
buffers each 465 465
1878 each 306 306
1879 each 112 112
1881 Spun yarn kilogram 76 76
1882 Strainer brass 40 mm dia 1.5
metre long
each 847 847
1885 15 mm C.P. brass tap each 561 561
1889 each 316 316
1891
couplings in C.P. brass: 50 mm
dia
each 245 245
1893
couplings in C.P. brass: 80 mm
dia
each 321 321
1895 C.P. brass trap 40 mm dia each 561 561
1896 100 mm S.C.I. trap with vent
heel
each 449 449
1897 each 388 388
1898 each 316 316
1900 S.W. gully trap P type 100x100
mm
each 135 135
1902 S.W. gully trap P type 150x100
mm
each 189 189
1904 S.W. gully trap P type 180x150
mm
each 326 326
1913 Vitreous china lipped front
urinal
each 2040 2040
1915 Vitreous china squatting plate
urinal
each 1224 1224
1922 each 301 301
1923 each 439 439
1924 each 464 464
1927 each 561 566
1928 each 612 617
1929 each 714 719
1930 each 923 928
1931 each 1612 1617
1932 each 2412 2417
1933 each 495 500
1934 each 668 673
1935 each 842 847
1936 each 1229 1234
1937 each 2234 2239
1938 each 3060 3060
1940 each 3417 3417
1941 each 3631 3631
1942 each 5069 5069
1943 each 10557 10557
1944 each 15300 15300
1945 each 21777 21777
1947 each 1071 1071
Black plastic seat (solid) with lid C.P. brass
hinges and rubber
Shower rose C.P. brass for 15 to 20 mm inlet
100 mm diaShower rose C.P.brass for 15 to 20 mm inlet
150 mm dia
C.P. brass toilet paper holder of standard size
C.I. trap for standard urinal with vent arm
with operating and other
C.I. trap for standard urinal with vent arm
with operating and other
100 mm S.C.I. trap with 100 mm inlet and
100 mm outlet100 mm S.C.I. trap with 100 mm inlet and 75
mm outlet
H.P. or L.P. ball valve with polythene floats:
15 mm diaH.P. or L.P. ball valve with polythene floats:
20 mm diaH.P. or L.P. ball valve with polythene floats:
25 mm diaBrass full way valve with C.I. wheel (screwed
end) 25 mm diaBrass full way valve with C.I. wheel (screwed
end) 32 mm diaBrass full way valve with C.I. wheel (screwed
end) 40 mm diaBrass full way valve with C.I. wheel (screwed
end) 50 mm diaBrass full way valve with C.I. wheel (screwed
end) 65 mm diaBrass full way valve with C.I. wheel (screwed
end) 80 mm diaGunmetal non-return valve-horizontal
(screwed end) 25 mm diaGunmetal non-return valve-horizontal
(screwed end) 32 mm diaGunmetal non-return valve-horizontal
(screwed end) 40 mm diaGunmetal non-return valve-horizontal
(screwed end) 50 mm diaGunmetal non-return valve-horizontal
(screwed end) 65 mm diaGunmetal non-return valve-horizontal
(screwed end) 80 mm diaC.I. sluice valve (with caps) class I: 100 mm
diaC.I. sluice valve (with caps) class I : 125 mm
diaC.I. sluice valve (with caps) class I: 150 mm
diaC.I. sluice valve (with caps) class I : 200 mm
diaC.I. sluice valve (with caps) class I : 250 mm
diaC.I. sluice valve (with caps) class I: 300 mm
diaVitreous china flat back wash basin 630x450
mm
19
1949 each 1020 1020
1950 each 571 571
1951 C.P. brass waste 32 mm each 153 153
1952 C.P. brass waste 40 mm each 175 175
1953 each 867 867
1954 each 1255 1255
1955 each 989 989
1956 Bolts and nuts 16 mm dia 60
mm long
each 19 19
1957 Bolts and nuts 16 mm dia 65
mm long
each 18 18
1958 Bolts and nuts 20 mm dia 65
mm long
each 23 23
1959 Bolts and nuts 20 mm dia 70
mm long
each 23 23
1960 Bolts and nuts 20 mm dia 75
mm long
each 23 23
1961 Bolts and nuts 20 mm dia 80
mm long
each 26 26
1962 Bolts and nuts 24 mm dia 85
mm long
each 41 41
1963 Bolts and nuts 24 mm dia 90
mm long
each 44 44
1964 Bolts and nuts 27 mm dia 100
mm long
each 53 53
1965 1831 1831
as per manufacturer's
specifications
each
1970 pair 255 255
1980 Fly ash cum 13 13
1984 1000
Nos
7344 7344
1986 1000
Nos
7446 7446
2391 metre 326 326
2392 metre 454 454
2393 kg 383 383
2394 Coupler 16 mm dia each 95 95
2395 Coupler 20 mm dia each 125 125
2396 Coupler 25 mm dia each 181 181
2397 Coupler 28 mm dia each 275 275
2398 Coupler 32 mm dia each 326 326
2399 Complete Roof Joint of 100 mm metre 6120 6120
2400 Complete Roof Joint of 150 mm metre 6554 6554
2401 Complete Roof Joint of 200 mm metre 6834 6834
2402 Epoxy adhesive kg 214 214
2403 Floor Joint of 100 mm metre 6222 6222
2404 Floor Joint of 150 mm metre 6936 6936
2405 Floor Joint of 200 mm metre 7497 7497
2406
than 10 kg/sqm) sqm 485 485
2407
Vitreous china angle back wash basin
600x480 mmVitreous china angle back wash basin
400x400 mm
Vitreous china Indian type W.C. pan size 580
mmVitreous china orrisa type W.C. pan size 580
mmVitreous china pedestal type water closet
White vitreous china dual purpose closet
(Anglo Indian W.C.)suitable for use as squatting pan or European
type water closet
Vitreous china foot rests 250x125x25 mm
Common burnt clay F.P.S. bricks tile class
designation 10
Common burnt clay modular bricks class
designation 12.5
Strips-Aluminium fluted 3.15 mm thick and
150 mm wideStrips Aluminium fluted 3.15 mm thick and
200 mm wide1 mm thick Stainless Steel Cover plate grade
304
Float glass sheet of nominal thickness 4 mm
(weight not less
Float glass sheet of nominal thickness 5.5
mm (weight not less
20
than 13.50 kg/sqm) sqm 714 714
2408
than 20.00 kg/sqm) sqm 969 969
2409 Wall Joint of 100 mm metre 4692 4692
2410 Wall Joint of 150 mm metre 5100 5100
2411 Wall Joint of 200 mm metre 5253 5253
2412 sqm 694 694
2413 12 mm commercial ply sqm 979 979
2414 sqm 1122 1122
2447 Hollock ballies 125 mm
diameter
metre 51 51
2449
each 77 77
2451 each 97 97
2452 each 102 102
2453 each 117 117
2454 each 133 133
2455 each 92 92
2456
accessories and screws complete each 867 867
2459 each 41 41
2464
each 77 77
2465 each 77 77
2466 Hollock wood in scantling 10 cudm 469 469
2467
each 240 240
2468 each 97 97
2469 each 112 112
2470 each 122 122
2471 each 153 153
2480 sqm 1561 1561
2481
another face 9 mm thick sqm 1122 1122
2483
another face 9 mm thick sqm 1377 1377
2484
sqm 1042 1042
2485
sqm 1122 1122
2486
confirming to IS:14587 sqm 1816 1816
2487
confirming to IS:14587 sqm 974 974
2488
confirming to IS:14587 sqm 1295 1295
Float glass sheet of nominal thickness 8 mm
(weight not less
Ply wood 5 ply with commercial ply on both
faces 6 mm thick
18 mm thick block board with commercial
ply veneering on both side
Oxidised mild steel pull bolt lock (locking
bolt) of size 85 mm x42 mm with screws, bolts, nuts and washers
completeBrass cupboard lock 6 levers of approved
quality, 40 mm sizeBrass cupboard lock 6 levers of approved
quality, 50 mm sizeBrass cupboard lock 6 levers of approved
quality, 65 mm sizeBrass cupboard lock 6 levers of approved
quality, 75 mm sizeBrass hanging type door stopper 150 mm
Hydraulic door closer bottle type M.S. body
with necessary
Anodised Aluminium hanging type door
stopperAnodised Aluminium pull bolt lock (locking
bolt) of size 85 mm x42 mm with screws, bolts, nuts and washers
completeAnodised Aluminium Casement stay 250 mm
Chromium plated Brass pull bolt lock
(locking bolt) of size 85 mmx 42 mm with screws, bolts, nuts and washers
completeNickled Chromium Brass cupboard lock 40
mm sizeNickled Chromium Brass cupboard lock 50
mm sizeNickled Chromium Brass cupboard lock 65
mm sizeNickled Chromium Brass cupboard lock 75
mm sizePly wood 5 ply with teak ply on both faces 9
mm thickPly wood 5 ply with teak ply on one face and
commercial ply on
Ply wood 7 ply with teak ply on one face and
commercial ply on
Pre-laminated with decorative lamination on
both side exteriorGrade - I MDF Board 12 mm thick
confirming to IS:14587Pre-laminated with decorative lamination on
both side exteriorGrade - I MDF Board 18 mm thick
confirming to IS:14587Pre-laminated with decorative lamination one
side and other sidebalancing lamination exterior Grade - I MDF
Board 25 mm thick
Pre-laminated with decorative lamination one
side and other sidebalancing lamination exterior Grade - I MDF
Board 12 mm thick
Pre-laminated with decorative lamination one
side and other sidebalancing lamination exterior Grade - I MDF
Board 18 mm thick
21
2489 PVC edge bending tape 2.00
mm thick
metre 41 41
2500 10 cudm 158 158
2504 Kiln seasoning of timber cum 816 816
2505 Hollock wood in planks 10 cudm 551 551
2506 10 nos 362 362
2507 10nos 423 423
2508 10 nos 514 514
mm
2509 10 Nos 648 648
140 mm
2510 10 Nos 806 806
2602 1000
Nos
6375 6375
2603 1000
Nos
5814 5814
2605 Structural sealant - 6 mm x 12
mm
metre 51 51
2606 Spacer tape 6.4 mm thick x 6
mm wide
metre 27 27
2607 each 638 638
2608 Weather Sealant - Normal (300
ml)
each 204 204
2609 MS Brackets/Aluminium Alloy
Brackets
kg 143 143
2610 Silicon Gasket in Kg (Above 50
g / m)
kg 847 847
2611 EPDM Gasket in Kg (Above 60
g / m)
kg 230 230
2612 Anchor Fastner - M10 each 158 158
2613 each 46 46
2614 each 7 7
2615 Protective Tape metre 34 34
2616 GI flashing - 1.2 mm Thick kg 92 92
2617 6 mm thick High performance
glass
sqm 2785 2785
2618 sqm 1122 1122
2619 each 204 204
2620 pair 2212 2212
2621 Connection Block each 57 57
2622 Curtain wall striker each 148 148
2623 Adjustable Fastening Pawl each 56 56
Extra for selected planks of second class
deodar wood
Carben Steel galvanised dash fastner (min 5
micron) of 10 mm diadouble threaded 6.8 grade counter sunk head
screw comprisingof 10 mm dia polyamide PA 6 grade sleave.
Size 10 mm x 60 mmCarben Steel galvanised dash fastner (min 5
micron) of 10 mm diadouble threaded 6.8 grade counter sunk head
screw comprisingof 10 mm dia polyamide PA 6 grade sleave.
Size 10 mm x 80 mmCarben Steel galvanised dash fastner (min 5
micron) of 10 mm diadouble threaded 6.8 grade counter sunk head
screw comprisingof 10 mm dia polyamide PA 6 grade sleave.
Size 10 mm x 120
Carben Steel galvanised dash fastner (min 5
micron) of 10 mm diadouble threaded 6.8 grade counter sunk head
screw comprisingof 10 mm dia polyamide PA 6 grade sleave.
Size 10 mm x
Carben Steel galvanised dash fastner (min 5
micron) of 10 mm diadouble threaded 6.8 grade counter sunk head
screw comprisingof 10 mm dia polyamide PA 6 grade sleave.
Size 10 mm x 160 mmCommon burnt clay F.P.S. (non modular)
bricks class designation 7.5
Common burnt clay F.P.S. (non modular)
bricks class designation 5.0
Weather Sealant - Non Staining (600 ml)
SS Bolt with washer of sizes for structural
glazing / ACP CladdingSS Screws of sizes for structural glazing /
ACP Cladding
6 mm thick clear heat strengthened glass
6 mm thick clear heat strengthened glass
ARMS GS HD -TOP HUNG -20"-TYPE P-
COUPLE
22
2624 Corner drive each 416 416
2625 Top wedge Block each 194 194
2626 sqm 321 321
2627 SS Screws - # 8 x 19 each 15 15
2628 Weather Sealant - DC 789 cartridge 179 179
2629 Cement Board sqm 347 347
2630 Baker rod metre 6 6
2631 4 mm thick ACP sqm 1790 1790
2632 Fire Stop metre 796 896
2634 GI/Aluminium Sheet (0.8
mm thick)
kg 82 82
2704 kilogra
m
337 337
2708 Truf Paver (500 x 500 x 40
mm)
sqm 1224 1224
2709 Ceremic Tiles Pieces for
Crazy Flooring
quintal 367 367
2710 quintal 258 258
2711 each 1020 1020
2712 Zinc Electroplated Pedestals -
300 mm
each 194 194
2713 Zinc Electroplated Pedestals -
450 mm
each 189 189
2714 Zinc Electroplated Tube
Stinger
each 93 93
2715 Machine Screw for Fixing each 2 2
2750 sqm 989 989
2751 sqm 566 566
2901 cum 1489 1479
2902 cum 1489 1479
2903 cum 1724 1714
2904 cum 1724 1714
2908 cum 632 653
2909 cum 663 683
2910 cum 1862 1846
2911 cum 1862 1846
2914 Solvent kilogra
m
39 39
2916 tonne 56304 55692
3002 sqm 59 59
3004 each 51 51
3050 Galvanised steel corrugated
sheets
quintal 8690 8690
3080 each 505 505
3084 each 729 729
3088 each 1051 1051
3092 each 1408 1408
3096 each 2381 2381
3213 each 1535 1535
3228 each 352 352
3229 each 765 765
Glass wool Denisity 48 Kg / m3 with Black
Glass Tissue (BGT)
Aluminium Strip 40 mm wide and 2 mm
thick
White marble makrana second quality
plain veined stone pieces for crazy FS800H Grade Flooring Panel ( Size 600
mm x600 mm x32 mm)
8 mm thick granite stone tiles (mirror
polished of all shades)8 mm thick marble tiles (polished) Raj
NagarStone Aggregate (Single size) : 100 mm
nominal sizeStone Aggregate (Single size) : 80 mm
nominal sizeStone chippings/ screenings 4.75 mm
nominal sizeStone chippings/ screenings 150 micron
nominal sizeOver burnt (Jhama) Brick Aggregate:
120 mm to 40 mm sizeOver burnt (Jhama) Brick Aggregate: 90
mm to 40 mm sizeStone chippings/ screenings 12.5/ 13.2
mm nominal sizeStone chippings/ screenings 10/ 11.2 mm
nominal size
Paving Asphalt VG 10 of approved
qualityPolyvinyle chloride sheet 400 micron
thickStone ware spouts 100 mm dia 60 cm
long
Gunmetal non-return valve - vertical
(screwed end) 25 mm diaGunmetal non-return valve - vertical
(screwed end) 32 mm diaGunmetal non-return valve - vertical
(screwed end) 40 mm diaGunmetal non-return valve - vertical
(screwed end) 50 mm diaGunmetal non-return valve - vertical
(screwed end) 65 mm diaVitreous china Surgeon type wash basin
of size 660x460 mm600x120 mm glass shelf with anodised
aluminium angle frame,C.P. brass brackets and guard rail of
standard sizeVitreous china flat back wash basin
550x400 mm
23
3300 each 4029 4029
3311 each 4080 4080
3314 each 4896 4896
3317 each 5987 5987
3320 each 12827 12827
3321 each 20808 20808
3326 each 25735 25735
3327 each 8160 8160
3617 C.P. Brass union 40mm dia each 270 270
3620
long:100 mm dia each 1683 1683
3621
75 mm dia each 1448 1448
3624 each 408 408
3625 each 337 337
3628 S.C.I. S&S bend 100 mm dia each 372 372
3629 S.C.I. S&S bend 75 mm dia each 270 270
3634 each 413 413
3635 each 347 347
3640 each 663 663
3641 each 459 459
3644
100 mm each 689 689
3645 each 520 520
3650 each 867 867
3651 each 648 648
3654
100x100 mm each 857 857
3655
75 mm each 668 668
3660 each 801 801
3664
75 mm each 898 898
3670 each 1122 1122
3674
75x75 mm each 1193 1193
3681
100 mm dia each 597 597
3682
75 mm dia each 454 454
3685
100x100x 100x100 mm dia each 745 745
3686
75x75 mm dia each 597 597
3690
100x75 mm dia each 765 765
3695
100x75x75 mm dia each 1020 1020
3699 each 316 316
3707 each 398 398
Gunmetal non-return valve - vertical
(screwed end) 80 mm diaC.I.sluice valve (with caps) class II : 100
mm diaC.I.sluice valve (with caps) class II : 125
mm diaC.I.sluice valve (with caps) class II : 150
mm diaC.I.sluice valve (with caps) class II : 200 mm
diaC.I.sluice valve (with caps) class II : 250 mm
diaC.I.sluice valve (with caps) class II : 300 mm
dia15 mm Battery Based Sensor Pillar Cock
C.C.I. (spun) socketed soil, waste and vent
pipe 1.80 metres
C.C.I. (spun) socketed soil, waste and vent
pipe 1.80 metres long:
S.C.I. S&S bends with access door 100 mm
diaS.C.I. S&S bends with access door 75 mm
dia
S.C.I. S&S heel rest sanitary bend 100 mm
diaS.C.I. S&S heel rest sanitary bend 75 mm dia
S.C.I. S&S single equal junctions
100x100x100 mmS.C.I. S&S single equal junctions 75x75x75
mmS.C.I. S&S single equal junctions with access
door 100x100x
S.C.I. S&S single equal junctions with access
door 75x75x75 mmS.C.I. S&S double equal junctions
100x100x100x100 mmS.C.I. S&S double equal junctions
75x75x75x75 mmS.C.I. S&S double equal junctions with
access door 100x100x
S.C.I. S&S double equal junctions with
access door 75x75x75x
S.C.I. S&S single unequal junctions
100x100x75 mmS.C.I. S&S single unequal junctions with
access door 100x100x
S.C.I. S&S double unequal junctions
100x100x75x75 mmS.C.I. S&S double unequal junctions with
access door 100x100x
S.C.I. S&S single equal invert branch of
required degree 100x100x
S.C.I. S&S single equal invert branch of
required degree 75x75x
S.C.I. S&S double equal invert branch of
required degree
S.C.I. S&S double equal invert branch of
required degree 75x75x
S.C.I. S&S single unequal invert branch of
required degree 100x
S.C.I. S&S double unequal invert branch of
required degree 100x
S.C.I. S&S, 75 mm offset for 75 mm dia pipe
S.C.I. S&S, 150 mm offset for 75 mm dia
pipe
24
3708 each 592 592
3712 each 423 423
3713 each 530 530
3716 each 500 500
3717 each 653 653
3728 S.C.I. S&S door pieces 100 mm
dia
each 561 561
3729 S.C.I. S&S door pieces 75 mm
dia
each 418 418
3733 each 495 495
3734 each 418 418
3738 S.C.I. S&S, collars 100 mm each 352 352
3739 S.C.I. S&S, collars 75 mm each 240 240
3746 each 306 306
3747 each 510 510
3749 each 209 209
3860 each 12648 12648
3861 each 6987 6987
4001 kg 495 495
4002 kg 255 255
4006 metre 321 321
4007 metre 347 347
4008 metre 388 388
4009 Mild steel tubes hot finished
welded type
kilogram 77 77
4010 kilogram 92 92
4011 kilogram 97 97
4012 Circular C.I. Box for ceiling fan each 92 92
4013 Pulley 40 mm dia each 46 46
4201 Aluminium primer litre 189 189
4202 Red oxide Zinc chromate primer litre 102 102
4203 Copper acetate kilogram 423 423
4204 Hydrochloric acid kilogram 49 49
4205 Copper chloride kilogram 423 423
4206 Copper nitrate kilogram 305 305
4207 Ammonium chloride kilogram 29 29
5001 Mobil oil litre 357 357
6001 sqm 2978 2978
6007 Pink marble slab plain 18 mm
thick
sqm 1191 1191
6010 sqm 918 918
6019 sqm 704 704
6501 Sand zone V (Jamuna) cum 836 836
7001 each 418 418
7003
latch and lock each 428 428
S.C.I. S&S, 150 mm offset for 100 mm dia
pipeS.C.I. S&S, 114 mm offset for 75 mm dia
pipeS.C.I. S&S, 114 mm offset for 100 mm dia
pipeS.C.I. S&S, 152 mm offset for 75 mm dia
pipeS.C.I. S&S, 152 mm offset for 100 mm dia
pipe
S.C.I. S&S, Slotted Cowl (Terminal Guard)
100 mmS.C.I. S&S, Slotted Cowl (Terminal Guard)
75 mm
S.C.I. S&S, 75 mm offset for 75 mm dia pipe
S.C.I. S&S, 75 mm offset for 100 mm dia
pipeVitreous china toilet paper holder of standard
size560 mm dia cover with frame (Heavy duty)
560 mm dia cover without frame (Heavy
duty)Stainless steel (Grade-304)hollow section
round/square tubesStainless steel bolts/square bar and plates
Pressed steel door frames (mild steel sheet
1.60 mm) Profile "B"Pressed steel door frames (mild steel sheet
1.60 mm) Profile "C"Pressed steel door frames (mild steel sheet
1.60 mm) Profile "E"
Mild steel tubes hot finished seamless type
Mild steel tubes electric resistant or induction
butt welded
White marble slab Makrana second quality
plain veined 18 mm thick
Udaypur green marble slab plain 18 mm thick
Black Zebra marble slab plain 18 mm thick
Brass 100mm mortice latch and lock with 6
levers without pair of handlesPair of Anodised Aluminium lever handles
for 100 mm mortice
25
7004 each 734 734
7005 each 1387 1387
7006 each 2383 2383
7008 1000
Nos
6446 6446
7009 sqm 240 240
7010 metre 102 102
7011 metre 56 56
7012 metre 102 102
7013 metre 31 31
7014
GI wire) each 8 8
7015 each 6 6
7016 Joint filler kilogram 31 31
7017 Joint finisher kilogram 36 36
7018 Joint tape roll roll 191 191
7019 Dash fastener / Chemical fastner each 20 20
7020 All drive screws ( for gypsum
board)
100 Nos 82 82
7021 Primer ( for gypsum board) litre 122 122
7022 litre 214 214
7023 each 9 9
7024 Acid Proof cement tonne 11220 11220
7027 M.S. Butt hinges 125x90x4 mm 10 Nos 163 163
7028 sqm 622 622
7029
nominal dia of wire 0.63 mm sqm 357 357
7030 sqm 316 316
7031 sqm 398 398
7032
less than 10 kg/sqm) sqm 490 490
7033 Nickel plated M.S. pipe 25 mm
dia
metre 112 112
7034 Nickel plated M.S. pipe 20 mm
dia
metre 102 102
7035 each 10 10
7036 each 11 11
7040 Oxidised mild steel screws 35
mm
100 Nos 66 66
7042 metre 82 82
7043 metre 97 97
7044 Rolling shutters of 80x0.90 mm
laths
sqm 1652 1652
7045 Rolling shutters of 80x1.2 mm
laths
sqm 1790 1790
7046 metre 495 495
7047 metre 520 520
7048 Rawl plug 50 mm (designation
10 nos)
each 15 15
7049 metre 31 31
Vitreous china flat back wash basin 450x300
mmVitreous china 10 litres low level cistern
without fittingsVitreous china 10 litres low level cistern with
fittingsF.P.S. (non modular) clay fly ash bricks class
designation 7.5
12.5 mm thick tapered edge gypsum plain
boradGalvanised Steel celling section (size
80x26x0.50 mm)Galvanised Steel perimetre Channel (Size
20x27x30x0.50 mm)Galvanised Steel intermediate Channel (Size
15x45x15x0.90 mm)Galvanised Steel angle hanger (Celling angle)
(Size 25x10x0.50 mm)Galvanised Steel connecting clips (2.64 mm
dia and 230 mm long
Galvanised Steel soffit cleat (Size
27x37x25x0.60 mm)
Chlorpyriphos 20% E.C. / Lindane 20% E.C.
Chromium plated brackets ( curtain rods)
12.5 mm thick Fully Perforated gypsum
boardGalvanised wire mesh of average width of
aperture 1.4 mm and
12.5 mm thick tapered edge gypsum fire
resistant board12.5 mm thick tapered edge gypsum moisture
resistant boardFrosted glass sheet of nominal thickness 4
mm (weighing not
Nickel plated M.S. Brackets for curtain rod
20 mmNickel plated M.S - Brackets for curtain rod
25 mm
Mild steel conduit pipe (heavy type) ISI
marked-20 mm diaMild steel conduit pipe (heavy type) ISI
marked-25 mm dia
Top cover of Rolling shutters 0.90 mm thick
Top cover of Rolling shutters 1.20 mm thick
Teak wood lipping of size 25x3 mm in
pelmets
26
7050 PU Primer sqm 59 59
7051 sqm 592 592
7052 GI wire netting 3/4" x 24 G sqm 36 36
7053 400 G polythene sheet sqm 20 20
7055
sqm 561 561
7056 metre 71 71
7059 each 87 87
7060 each 1265 1265
7063
than 0.33 kg each 36 36
7064
than 0.28 kg each 31 31
7065
less than 0.24 kg each 26 26
7068 sqm 367 367
7070
sqm 510 510
7071 sqm 1122 1122
7072 Wall mounted water closet each 6426 6426
7073 each 3417 3417
7074 White Vetrious China Waterless
Urinal
each 20400 20400
7075 Cistern with fittings for
Waterless Urinal
each 4692 4692
7076 White Vetrious Urinal each 2040 2040
7077 10 Nos 816 816
7087 S.C.I. Tee 150 mm each 826 826
7090 Expanded polystyrene type N-
Normal
sqm 189 189
7091 Expanded polystyrene type - SE sqm 204 204
7095 each 7140 7140
7096
bowl depth 225 mm each 6681 6681
7097
bowl depth 200 mm each 5916 5916
7098
depth 178 mm each 4080 4080
7101
bowl depth 200 mm each 4233 4233
7102
bowl depth 200 mm each 3953 3953
7103
bowl depth 178 mm each 2958 2958
7104 each 1979 1979
7105 each 2040 2040
7106 each 2576 2576
7107 each 821 821
7112 each 678 678
40 mm (average) PU spray having 40-45
kg/m3 density
Flat pressed 3 layer and graded particle board
(medium density)Grade 1 conforming to IS : 3087 - 18 mm
thickAluminium tee channel (heavy duty) with
rollers and stop endAluminium hanging floor door stopper with
twin rubber & stopperHydraulic door closer tubular type
Aluminium section bodyOxidised M.S.casement stay (straight peg
type) 300 mm not less
Oxidised M.S.casement stay (straight peg
type) 250 mm not less
Oxidised M.S. casement stay (straight peg
type) 200 mm not
Extra for providing grilled rolling shutters
with 8 mm dia M.S. rodChequered precast cement concrete tiles 22
mm thick usingmarble chips of size 6mm - Light shade using
white cementWhite marble Raj Nagar plain 18 mm thick
upto 0.50 sqm area
Adjustable Vetrious China Cistern with
fittings
Acid and alkali resistant tiles 300x300 mm
size, 10 mm thick
Stainless steel kitchen sink - with drain board
bowl depth 250 mmStainless steel kitchen sink - with drain board
510 x 1040 mm
Stainless steel kitchen sink - with drain board
510 x 1040 mm
Stainless steel kitchen sink - with drain board
510x1040 mm bowl
Stainless steel kitchen sink - without drain
board 610x510 mm
Stainless steel kitchen sink - without drain
board 610x460 mm
Stainless steel kitchen sink - without drain
board 470x420 mm
Coloured Orissa pattern W.C. pan 580x440
mmColoured Pedestal type W.C. pan 580x440
mm (European type)Coloured Vitreous china 10 lit. low level
cisternColoured (other than black) solid P.V.C. seat
in European W.C. panCircular shape 450 mm dia Mirror with
Plastic moulded frame
27
7113 each 408 408
7114
moulded frame each 490 490
7115 each 938 938
7116 Hard board 6 mm thick sqm 255 255
7117
each 41 41
7118
each 46 46
7119
each 37 37
7120
each 41 41
7123
each 918 918
7126
level flushing cistern with all
fittings
each 1377 1377
7127
level flushing cistern with all
fittings
each 2040 2040
7128 S.W. intercepting trap 100 mm
dia
each 265 265
7129 S.W. intercepting trap 150 mm
dia
each 347 347
7130
with frame - L.D. - 25 each 1005 1005
7131
frame - L.D. - 25 each 887 887
7132
frame - L.D. - 25 each 826 826
7133
with frame - M.D. - 10 each 964 964
7134
frame -M.D.-10 each 847 847
7135
frame - H.D. - 20 each 1530 1530
7136
frame - E.H.D. - 35 each 1642 1642
7137
resin adhesive, as per IS:848 sqm 2601 2601
7139
sqm 2866 2866
7143
both sides prelaminated type-I, medium
density flat pressed threelayer, graded particle board (FPT-I) as per
IS:3087 bonded withBWP type synthetic resin adhesive, as per
IS:848
plain type-I, medium density flat pressed
three layer, graded particleboard (FPT-I) as per IS:3087 bonded with
BWP type synthetic
Factory made 35 mm thick shutters with
laminated veneer lumberstyles & rails as per TADS 15:1995 and
panels of 12 mm thick
Circular shape 560 mm dia precast R.C.C.
manhole cover with
Factory made 35 mm thick shutters with
laminated veneer lumberstyles & rails as per TADS 15:1995 and
panels of 12 mm thick
Rectangular shape 500x500 mm precast
R.C.C. manhole cover
Circular shape 500 mm dia precast R.C.C.
manhole cover with
Circular shape 560 mm dia precast R.C.C.
manhole cover with
Rectangular shape 600x450 mm precast
R.C.C. manhole cover
Square shape 450x450 mm precast R.C.C.
manhole cover with
Circular shape 450 mm dia precast R.C.C.
manhole cover with
flush) capacity controlled low level flushing
cistern with fittings
Flexible (coil shaped) PVC waste pipe for
sink and wash basin 40mm dia with length not less than 700 mm i/c
PVC waste fittingsColoured High density polyethylene / poly
propylene 10 lit. (full
with length not less than 700 mm i/c PVC
waste fittingsFlexible (coil shaped) PVC waste pipe for
sink and washbasin 32mm dia with length not less than 700 mm i/c
PVC waste fittings
with length not less than 700 mm i/c PVC
waste fittingsSemi Rigid PVC waste pipe for sink and
wash basin 40 mm dia
Oval shape 450x350 mm (outer dimensions)
Mirror with Plastic
Rectangular shape 1500x450 mm Mirror with
Plastic moulded frame
Semi Rigid PVC waste pipe for sink and
wash basin 32 mm dia
Rectangular shape 453x357 mm Mirror with
Plastic moulded frame
White Vitreous china 10 litre (full flush)
capacity controlled low
Coloured Vitreous china 10 litre (full flush)
capacity controlled low
Factory made 35 mm thick shutters with
laminated veneer lumberstyles & rails as per TADS 15:1995 and
panels of 12 mm thick
28
adhesive, as per IS:848 sqm 2754 2754
7151
using 10 kg/ sqm glass panes sqm 2346 2346
7154
with wire of dia 0.63 mm sqm 2346 2346
7155
with wire of dia 0.63 mm sqm 2040 2040
7157
10 cudm 1005 1005
7178 Chemical ASTMC-type I kg 155 155
7181 C.I. pile shoe kilogram 71 71
7182 M.S. clamps for pile shoe kilogram 66 66
7183 Bentonite tonne 4590 4590
7184
door each 87 87
7187 each 82 82
7188
75 mm dia metre 92 92
7189
110 mm dia metre 184 184
7190
75 mm dia each 26 26
7191
110 mm dia each 28 28
7192 each 51 51
7193 each 73 73
7194 each 71 71
7195 each 112 112
7196 each 133 133
7197 each 179 179
7198 each 168 168
7199 each 250 250
7208 UPVC bend 87.5ø 75 mm bend each 82 82
7209 UPVC bend 87.5ø 110 mm
bend
each 133 133
7212 UPVC plain shoe 75 mm bend each 148 148
7213 UPVC plain shoe 110 mm bend each 296 296
7214 UPVC pipe clip 75 mm bend each 21 21
one side prelaminated type-I, and other side
balancing lamination,medium density flat pressed three layer,
graded particle board(FPT-I) as per IS:3087 bonded with BWP
type synthetic resin
Factory made 30 mm thick shutters with
laminated veneer lumberstyles & rails as per TADS 15:1995 and
panels of sheet glass
Factory made 35 mm thick shutters with
laminated veneer lumberstyles & rails as per TADS 15:1995 and
panels of galvanised wiregauge with average width of aperture 1.4 mm
in both directions
Factory made 30 mm thick shutters with
laminated veneer lumberstyles &rails as per TADS 15:1995 and
panels of galvanised wiregauge with average width of aperture 1.4 mm
in both directions
Laminated veneer lumber confirming to
TADS 15:1995 manufa-ctured in factory in frames of doors, windows
Oxidised M.S. safety chain (weighing not
less than 450 gms) for
C.I. grating 150 mm dia, weighing not less
than 440 gmuPVC pipes (working pressure 4 kg / cm2 )
Single socketed pipe
uPVC pipes (working pressure 4 kg / cm2 )
Single socketed pipe
uPVC pipes (working pressure 4 kg / cm2 )
Rubber (Seal) Ring
uPVC pipes (working pressure 4 kg / cm2 )
Rubber (Seal) Ring
uPVC coupler for UPVC drainage pipes 75
mmuPVC coupler for UPVC drainage pipes 110
mmuPVC pushfit coupler (single) 75 mm thick
uPVC pushfit coupler (single) 110 mm thick
uPVC single equal Tee (without door)
75x75x75 mmuPVC single equal Tee (without door)
110x110x110 mmuPVC single equal Tee (with door) 75x75x75
mmuPVC single equal Tee (with door)
110x110x110 mm
29
7215 UPVC pipe clip 110 mm bend each 42 42
7231 sqm 204 204
7232 sqm 291 291
7233 sqm 122 122
7236
ordinary cement sqm 342 342
7237
50% white cement 50%
ordinary cement
sqm 765 765
7238 High Albedo paint kg 347 347
7239 Epoxy paint litre 352 352
7240 Fire retardant paint litre 418 418
7241 Melamine polish litre 423 423
7244
stone - 18 mm thick sqm 2754 2754
7245
18 mm thick sqm 2754 2754
7246
tonne capacity pile per test 49980 49980
7247
and up to 100 tonne per test 60435 60435
7248
more up to 50 tonne per test 68289 68289
7249
to 50 tonne capacity per test 21165 21165
7250
per test 32436 32436
7251
piles up to 50 tonne capacity
each
per test 41514 41514
7252
tonne capacity per test 21114 21114
7253
tonne capacity per test 33252 33252
7254 Hardening compound litre 57 57
Resin Bonded Glass wool 16 kg/ m3: 50 mm
thickResin Bonded Glass wool 24 kg/ m3: 50 mm
thickFibre glass tissue reinforcement Type II
Grade IPrecast chequered cement tiles 22 mm thick
Dark shade using
Precast chequered cement tiles 22 mm thick
medium shade using
Table rubbed polished stone 18 mm thick
(75x50cm) Agaria Marble
Table rubbed polished stone 18mm thick
(75x50cm) Granite stone-
Vertical load testing (initial) of piles in
accordance with IS : 2911(Part-IV) including installation of loading
platform and preparationof pile head or construction of test cap and
dismantling of testcap after test etc. complete as per
specification and up to 50
Vertical load testing (initial) of piles in
accordance with IS : 2911(Part-IV) including installation of loading
platform and preparationof pile head or construction of test cap and
dismantling of testcap after test etc. complete as per
specification & above 50 tonne
Vertical load testing (initial) of piles in
accordance with IS : 2911(Part-IV) including installation of loading
platform and preparationof pile head or construction of test cap and
dismantling of testcap after test etc. complete as per
specification & group of two or
Cyclic vertical load testing of piles in
accordance with IS : 2911(Part-IV) including preparation of pile head
etc. for Single pile up
Cyclic vertical load testing of piles in
accordance with IS : 2911(Part- IV) including preparation of pile head
etc. for Single pileabove 50 tonne capacity pile and up to 100
tonne capacity pileCyclic vertical load testing of piles in
accordance with IS : 2911(Part- IV) including preparation of pile head
etc. for Group of two
Lateral load testing of single pile in
accordance with IS : 2911 part-IV for determining safe allowable lateral
load on pile up to 50
Lateral load testing of single pile in
accordance with IS : 2911 part-IV for determining safe allowable lateral
load on pile above 50
30
7255 Road marking paint (spirit
based)
litre 184 184
7256 litre 255 255
7257 C.P. Brass bibcock 15 mm each 561 561
7258 C.P. Brass long nose bibcock 15
mm
each 913 913
7259 C.P. Brass long body bibcock
15 mm
each 699 699
7260 each 724 724
7261 C.P. Brass angle valve 15 mm each 582 582
7266 1000
Nos
17034 17034
7267
bonded) (600x600x12 mm) each 168 168
7268 each 168 168
7269 25 mm thick particle board sqm 673 673
7270 sqm 1193 1193
7271 metre 57 57
7272 sqm 1316 1316
7273 Resin Bonded Rockwool 48
kg/m3
sqm 296 296
7280 Waste plastic additive tonne 56202 56202
7281 Chemical ASTMC-type II kg 224 224
7295 sqm 2667 2667
7296 sqm 3239 3239
7297 sqm 2815 2815
7306 Aluminium T or L sections kilogram 296 296
7307
side instead of commercial
veneering
sqm 479 479
7309 tonne 57630 57630
7312
25 mm long each 14 14
7313
32 mm long each 15 15
7314
40 mm long each 19 19
7315
50 mm long each 22 22
7318 Plasticizer / super plasticizer kilogram 53 53
7319 Wall form panel 1250x500 mm each 1469 1469
7320 Tie bolt 12 mm dia 100 mm
length
each 70 70
7321 Tie bolt 12 mm dia 150 mm
length
each 84 84
7322 Tie bolt 20 mm dia 150 mm
length
each 106 106
7323 Tie bolt 20 mm dia 225 mm
length
each 128 128
7324 Spring coil 12 mm each 22 22
7325 Plastic cone 12 mm dia each 25 25
Superior quality road marking paint ( water
based )
C.P. Brass stop cock (concealed) 15 mm
Pressed clay tiles 20mm thick 250x250 mm
size
Plain ceiling tiles (BWP type phenol
formaldehyde synthetic resin
Semi perforated ceiling tiles (600x600x12
mm)
30 mm thick prelaminated flush door shutter
IInd class teak wood lipping 25 mm wide x
12 mm thick25 mm thick melamine faced prelaminated
three layer particle board
Granite of any colour, 18 mm thick (slab area
upto 0.50 sqm)Granite of any colour, 30 mm thick (slab area
upto 0.50 sqm)Granite of any colour, 18 mm thick (slab area
above 0.50 sqm)
For flush door shutters Extra for providing
teak veneering on one
Paving Asphalt of grade VG-30 of approved
qualityExpandable fastener with plastic sleeve and
M.S. screws :
Expandable fastener with plastic sleeve and
M.S. screws :
Expandable fastener with plastic sleeve and
M.S. screws :
Expandable fastener with plastic sleeve and
M.S. screws.
31
7326 Corner angle 45x45x5 mm 1.50
m long
each 423 423
7327 100 mm channel shoulder 2.5 m
long
each 1632 1632
7328 Double clip ( bridge clip) each 138 138
7329 Single clip each 108 108
7330 M.S. tube 40 mm dia metre 393 393
7331 Wall form panel 1250x450 mm each 1459 1459
7332 Corner angle 45x45x5 mm 2.50
m long
each 479 479
7333 Column clamp 450x1070 mm each 1714 1714
7334 Prop 2 m ( 2-3.5 m) each 1168 1168
7335 Binding wire kilogram 77 77
7338 Gun metal cramp kilogram 464 464
7339 Stainless steel cramp kilogram 479 479
7340 Stainless steel pin. kg 267 267
7342 Adjustable span ESO+SI (2.35-
3.40)
each 2683 2683
7343 each 1693 1693
7344 each set 597 597
7345 Prop 4 m each 1652 1652
7346 Double coupler each 77 77
7347 100 Nos 40 40
7348 100 nos 14 14
7349 12 mm M.S. 'U' beading metre 21 21
7354 each 162 162
7358
fittings, accessories and flush
pipe)
each 898 898
7359 each 734 734
7361 each 791 791
7363 each 1051 1051
7364 each 775 775
7366 sqm 352 352
7367 metre 97 97
7369 metre 112 112
7375
pipe Single lipped urinal each 653 653
7376
pipe Range of two lipped urinals each 1474 1474
7377
pipe Range of three lipped
urinals
each 1754 1754
7378
pipe Range of four lipped
urinals
each 2672 2672
7379
2556 each 2251 2251
Adjustable telescopic prop 3 m (2.02-3.75 m)
Beam clamp 300-380 mm (450-1070 mm)
Cadmium plated full threaded steel screws
(30x4 mm dia)
Aluminium washer 2 mm thick 15 mm dia
Plastic encapsulated M.S. foot rest 30x20x15
cmFlushing Cistern P.V.C. 10 litre capacity (
low level ) (White) ( with
P.V.C. automatic flushing cistern 5 litre
capacityP.V.C. automatic flushing cistern 10 litre
capacity15 mm C.P. brass tap with elbow operation
leverWhite glazed fire clay draining board
600x450x25 mmGlass reinforced Gypsum ( GRG) board 12.5
mm thickGalvanised M.S. sheet 0.5 mm thick pressed
channel section of size 50x32mmGalvanised M.S. sheet 0.50 mm thick pressed
stud : 48x34x36 mmG.I. flush pipe and C.P. brass spreader
including C.P. connecting
G.I. flush pipe and C.P. brass spreader
including C.P. connecting
G.I. flush pipe and C.P. brass spreader
including C.P. connecting
G.I. flush pipe and C.P. brass spreader
including C.P.connecting
White vitreous china clay half stall urinal flat
back 580x380x350mm or angle back 450x375x350 mm with
waste fittings as per IS:
32
7380 each 908 908
7381 each 454 454
7382 tonne 41922 41922
7385 sqm 801 801
7386 12 mm thick particle board
ceiling tile
sqm 388 388
7387 Spigot for standard jointing kilogram 63 63
7388 each 70 70
7389 kilogram 56 56
7390 Neoprene/EPDM rubber gasket metre 35 35
7391 kilogram 70 70
7392 kilogram 95 95
7393 kilogram 97 97
7394 each 2142 2142
7395 each 41 41
7396 each 2356 2356
7397 Base Jack each 245 245
7398 Challies each 1122 1122
7399 Cup locks each 112 112
7400 15 mm PTMT bib cock each 168 168
7401 each 189 189
7402 each 224 224
7403 15 mm dia PTMT stop
cock(male thread)
each 153 153
7405 20 mm dia PTMT stop cock each 204 204
7406 PTMT pillar cock each 235 235
7407 PTMT push cock 15 mm dia each 148 148
7408 each 122 122
7409 PTMT grating 100 mm dia each 46 46
7410 each 337 337
7411 125 mm grating with waste hole each 59 59
7412
high with 100 mm dia (110 gm) each 173 173
7415 Double acting air valve 50 mm each 5610 5610
7416 Double acting air valve 80 mm each 7293 7293
7417 Double acting air valve 100 mm each 9486 9486
7418 each 2989 2989
7419 each 4641 4641
7420 each 7007 7007
7421 each 7599 7599
7422 Dirt box strainer 80 mm each 3922 3922
7423 Dirt box strainer 100 mm each 6426 6426
7424 Dirt box strainer 150 mm each 8160 8160
7425 Dirt box strainer 200 mm each 11516 11516
Precast R.C.C. grating with frame 500x450
mm horizontal gratingPrecast R.C.C. grating with frame 450x100
mm vertical gratingBitumen emulsion rapid setting (R.S.)
confirming to IS : 88873 mm thick translucent white acrylic plastic
sheet
Dash hold fastener 12.5 mm dia, 50 mm long
with 6 mm dia boltAnodising 15 microns on aluminium sections
Anodising 25 microns on aluminium sections
Powder coating 50 microns on aluminium
sections
Polyester powder coating 50 microns on
aluminium sections
Double action hydraulic floor spring with
stainless steel cover plate6 mm dia G.I. adjustable hangers including
clips (up to 1.2 m length)Double action hydraulic floor spring with
brass cover plate
15 mm PTMT bib cock with flange (fancy)
15 mm PTMT bib-cock long body with
flange
PTMT push cock 12 mm dia 20 mm BSP
PTMT Pillar cock (fancy) 15 mm foam flow
Rectangular type with openable circular lid
150 mm size 18 mm
Water meter (including testing charges) 80
mmWater meter (including testing charges) 100
mmWater meter (including testing charges) 150
mmWater meter (including testing charges) 200
mm
33
7426 Cat's eye each 251 251
7427 metre 585 585
7428 Water stops Dumb bell with
central bulb
metre 546 546
7429 Kickers metre 523 523
7430 each 19 19
7431 each 21 21
7432 each 39 39
7439 sqm 704 704
7442 Wheel 75 mm dia. 40 mm wide each 92 92
7443 each 22 22
7444 Aluminium grip strip of size
50x12x2 mm
each 15 15
7445 sqm 1265 1265
7449 Aluminium U beading kilogram 329 329
7451 Glass sheet (Pin headed) 4 mm
thick
sqm 490 490
7452
thick (slab area upto 0.50 sqm) sqm 913 913
7453
thick (slab area more than 0.50
sqm)
sqm 1051 1051
7466
thick metre 42 42
7468
12 mm thick sqm 734 734
7477
12 mm thick sqm 1051 1051
7478
18 mm thick sqm 1209 1209
7479
25 mm thick sqm 1311 1311
7480
sqm 1112 1112
7485
width) metre 59 59
7486
width) metre 75 75
7491 PTMT - Waste Coupling 31/32
mm
each 87 87
7492 PTMT - Waste Coupling 38/40
mm
each 122 122
7493 PTMT - Bottle Trap 31/32 mm each 530 530
Water stops Serrated with central bulb (225
mm wide, 8-11 mm thick)
Wedge expansion hold fastener 1/4" or 6 mm
Wedge expansion hold fastener 3/8" or 10
mmWedge expansion hold fastener 1/2" or 12
mm8mm thick (mirror polished tiles machine cut
edge) Raj Nagar white
Aluminium single cleat of size 30x32x3 mm
25 mm thick prelaminated flush door shutter
both side decorative
Raj nagar plain white marble (table rubbed
and polished) 18 mm
Raj nagar plain white marble (table rubbed
and polished) 18 mm
Second class deodar teak wood lipping 30
mm wide x 12 mm
Veneered particle board with commercial
veneering on both sides
Prelaminated particle board with one side
decorative and otherside balancing lamination, flat pressed 3 layer
& graded (mediumdensity) Grade I, Type II conforming to IS :
12823 (exterior grade)
Prelaminated particle board with one side
decorative and otherside balancing lamination, flat pressed 3 layer
& graded (mediumdensity) Grade I, Type II conforming to IS :
12823 (exterior grade)
Prelaminated particle board with one side
decorative and otherside balancing lamination, flat pressed 3 layer
& graded (mediumdensity) Grade I, Type II conforming to IS :
12823 (exterior grade)
Pre/aminated particle board with both sides
decorative lamination,flat pressed 3 layer & graded (medium
density) Grade I, Type IIconforming to IS : 12823 (exterior grade) 12
mm thickOxidised M. S. hinges finished with nickel
plating 50 mm (Over all
Oxidised M. S. hinges finished with nickel
plating 65 mm (Over all
34
7494 PTMT - Bottle Trap 38/40 mm each 561 561
7495
Rod & H.D. Ball each 224 224
7496
Rod & H.D. Ball each 275 275
7497
Rod & H.D. Ball each 592 592
7498
Rod & H.D. Ball each 1122 1122
7499
Rod & H.D. Ball each 1581 1581
7500 each 204 204
7501 PTMT Swiveling shower 15 mm each 153 153
7503 each 255 255
7504 PTMT Towel Ring 215x200x37
mm
each 204 204
7505 PTMT- Towel Rail (450 mm) each 337 337
7506 PTMT - Towel Rail (600 mm) each 408 408
7507 PTMT Shelf 450x124x36 mm each 423 423
7508 PTMT - Urinal Spreader 15 mm each 204 204
7509 PTMT Soap Dish/Holder
138x102x75 mm
each 173 173
7512 PTMT handle 125x34x24 mm each 46 46
7513 PTMT handle 150x34x24 mm each 51 51
7514 PTMT butt hinges 75x60x10
mm
each 61 61
7515 PTMT butt hinges 100x75x10
mm
each 87 87
7516 PTMT Tower bolt 152x42x18
mm
each 92 92
7517 PTMT Tower bolt 202x42x18
mm
each 122 122
7518 PTMT door catcher 72x42 mm each 46 46
7552 Coir veneered board 4 mm thick sqm 423 423
7553 Coir veneered board 6 mm thick sqm 561 561
7555 Coir veneered board 12 mm
thick
sqm 969 969
7556 Coir veneered board 18 mm
thick
sqm 1479 1479
7651 metre 1326 1326
7652 metre 1683 1683
7653 metre 2326 2326
7654 metre 4386 4386
7655 metre 4182 4182
7656 metre 4998 4998
7657 metre 6426 6426
7658 metre 7395 7395
PTMT Ball Cock 15mm complete with
Epoxy Coated Aluminium
PTMT Ball Cock 20mm complete with
Epoxy Coated Aluminium
PTMT Ball Cock 25mm complete with
Epoxy Coated Aluminium
PTMT Ball Cock 40mm complete with
Epoxy Coated Aluminium
PTMT Ball Cock 50mm complete with
Epoxy Coated Aluminium
PTMT Angle Stop cock with Flange 15 mm
PTMT Liquid Soap Container of 400 ml
capacity
Ductile Iron class K - 9 pipe Conforming to
I.S. 8329 100 mm diaDuctile Iron class K - 9 pipe Conforming to
I.S. 8329 150 mm diaDuctile Iron class K - 9 pipe Conforming to
I.S. 8329 200 mm diaDuctile Iron class K - 9 pipe Conforming to
I.S. 8329 - 250 mm diaDuctile Iron class K - 9 pipe Conforming to
1.S. 8329 - 300 mm diaDuctile Iron class K - 9 pipe Conforming to
I.S. 8329 - 350 mm diaDuctile Iron class K - 9 pipe Conforming to
1.S. 8329 - 400 mm diaDuctile Iron class K - 9 pipe Conforming to
1.S. 8329 - 450 mm dia
35
7659 metre 9282 9282
7660 metre 11169 11169
7661 metre 15504 15504
7662 metre 16830 16830
7663 metre 16983 16983
7664 metre 20502 20502
7665 metre 22950 22950
7666 each 44 44
7668 each 56 56
7669 each 92 92
7670 each 112 112
7671 each 163 163
7672 each 189 189
7673 each 342 342
7674 each 398 398
7675 each 434 434
7676 each 541 541
7677 each 816 816
7678 each 979 979
7679 each 1076 1076
7680 each 1423 1423
7681 each 1693 1693
7682 quintal 18360 18360
7683 quintal 25500 25500
7684
9523 - up to 600 mm dia quintal 19380 19380
7685
9523 over 600 mm dia quintal 28305 28305
7686 metre 3213 3213
7687 metre 4993 4993
7688 metre 5789 5789
7689 metre 4906 4906
7690 metre 9920 9920
7691 metre 12393 12393
7692 metre 15127 15127
7693 metre 18304 18304
7694 metre 21410 21410
7695 metre 29580 29580
7696 metre 36261 36261
7697 metre 1280 1280
7698 metre 1581 1581
7699 metre 1938 1938
7700 metre 3274 3274
7701 metre 4248 4248
7702 metre 5727 5727
7703 metre 6885 6885
7704 metre 9078 9078
7705 metre 11149 11149
7706 metre 13097 13097
7707 metre 17804 17804
Ductile Iron class K - 9 pipe Conforming to
I.S. 8329 - 500 mm diaDuctile Iron class K -9 pipe Conforming to
I.S. 8329 - 600 mm diaDuctile Iron class K - 9 pipe Conforming to
I.S. 8329 - 700 mm diaDuctile Iron class K - 9 pipe Conforming to
I.S. 8329 - 750 mm diaDuctile Iron class K - 9 pipe Conforming to
I.S. 8329 - 800 mm diaDuctile Iron class K - 9 pipe Conforming to
1.S. 8329 - 900 mm diaDuctile Iron class K - 9 pipe Conforming to
I.S. 8329 - 1000 mm diaRubber Gaskets Conforming to I.S 5382 of
S.B.R quality 100 mm diaRubber Gaskets Conforming to I.S 5382 of
S.B.R quality 150 mm diaRubber Gaskets Conforming to 1.S 5382 of
S.B.R quality 200 mm diaRubber Gaskets Conforming to I.S 5382 of
S.B.R quality 250 mm diaRubber Gaskets Conforming to I.S 5382 of
S.B.R quality 300 mm diaRubber Gaskets Conforming to I.S 5382 of
S.B.R quality 350 mm diaRubber Gaskets Conforming to I.S 5382 of
S.B.R quality 400 mm diaRubber Gaskets Conforming to I.S 5382 of
S.B.R quality 450 mm diaRubber Gaskets Conforming to I.S 5382 of
S.B.R quality 500 mm diaRubber Gaskets Conforming to I.S 5382 of
S.B.R quality 600 mm diaRubber Gaskets Conforming to I.S 5382 of
S.B.R quality 700 mm diaRubber Gaskets Conforming to I.S 5382 of
S.B.R quality 750 mm diaRubber Gaskets Conforming to I.S 5382 of
S.B.R quality 800 mm diaRubber Gaskets Conforming to I.S 5382 of
S.B.R quality 900 mm diaRubber Gaskets Conforming to I.S 5382 of
S.B.R quality 1000 mm diaDuctile Iron K - 12 specials suitable for push
on jointing up to 600 mm diaDuctile Iron K - 12 specials suitable for push
on jointing over 600 mm diaDuctile Iron specials suitable for mechanical
jointing as per I.S.
Ductile Iron Specials suitable for mechanical
jointing as per I.S.
Ductile Iron Pipe Class K-9 flanges and
welding 100 mm diaDuctile Iron Pipe Class K-9 flanges and
welding 150 mm diaDuctile Iron Pipe Class K-9 flanges and
welding 200 mm diaDuctile Iron Pipe Class K-9 flanges and
welding 250 mm diaDuctile Iron Pipe Class K-9 flanges and
welding 300 mm diaDuctile Iron Pipe Class K-9 flanges and
welding 350 mm diaDuctile Iron Pipe Class K-9 flanges and
welding 400 mm diaDuctile Iron Pipe Class K-9 flanges and
welding 450 mm diaDuctile Iron Pipe Class K-9 flanges and
welding 500 mm diaDuctile Iron Pipe Class K-9 flanges and
welding 600 mm diaDuctile Iron Pipe Class K-9 flanges and
welding 700 mm diaS&S Centrifugally (Spun) C.I. Pipe class LA
100 mm diaS&S Centrifugally (Spun) C.I. Pipe class LA
125 mm diaS&S Centrifugally (Spun) C.I. Pipe class LA
150 mm diaS&S Centrifugally (Spun) C.I. Pipe class LA
200 mm diaS&S Centrifugally (Spun) C.I. Pipe class LA
250 mm diaS&S Centrifugally (Spun) C.I. Pipe class LA
300 mm diaS&S Centrifugally (Spun) C.I. Pipe class LA
350 mm diaS&S Centrifugally (Spun) C.I. Pipe class LA
400 mm diaS&S Centrifugally (Spun) C.I. Pipe class LA
450 mm diaS&S Centrifugally (Spun) C.I. Pipe class LA
500 mm diaS&S Centrifugally (Spun) C.I. Pipe class LA
600 mm dia
36
7708
for lead jointing up to 300 mm
dia
quintal 7783 7783
7709
for lead jointing over 300 mm
dia
quintal 12087 12087
7710
joint as per I.S. 13382 up to 300
mm dia
quintal 12730 12730
7711
joint as per I.S. 13382 over 300
mm dia
quintal 13362 13362
7712
B conforming to I.S. 1536, -
100 mm dia
metre 1938 1938
7713
B conforming to I.S. 1536, -
150 mm dia
metre 3075 3075
7714
B conforming to I.S. 1536, -
200 mm dia
metre 4947 4947
7715
B conforming to I.S. 1536, -
250 mm dia
metre 5834 5834
7716
B conforming to I.S. 1536, -
300 mm dia
metre 7446 7446
7717
B conforming to I.S. 1536, -
350 mm dia
metre 9435 9435
7718
B conforming to I.S. 1536, -
400 mm dia
metre 12240 12240
7719
B conforming to I.S. 1536, -
450 mm dia
metre 15422 15422
7720
B conforming to I.S. 1536, -
500 mm dia
metre 19319 19319
7721
B conforming to I.S. 1536, -
600 mm dia
metre 26540 26540
7722 metre 1122 1122
7723 metre 1632 1632
7724 metre 2193 2193
7725 metre 2958 2958
7726 metre 4080 4080
7727 metre 4998 4998
7728 metre 5763 5763
7729 metre 6926 6926
7730 metre 8160 8160
7731 metre 10608 10608
7732 metre 13515 13515
7733 metre 17340 17340
7734 metre 22899 22899
S&S Centrifugally (Spun) C.I. Pipe Specials
as per IS 1538 suitable
S&S Centrifugally (Spun) C.I. Pipe Specials
as per IS 1538 suitable
S&S Centrifugally (Spun) C.I. Pipe specials
suitable for mechanical
S&S Centrifugally (Spun) C.I. Pipe Specials
suitable for mechanical
Screwed double flanged centrifugally cast
(spun) C.I. Pipe of Class
Screwed double flanged centrifugally cast
(spun) C.I. Pipe of Class
Screwed double flanged centrifugally cast
(spun) C.I. Pipe of Class
Screwed double flanged centrifugally cast
(spun) C.I. Pipe of Class
Screwed double flanged centrifugally cast
(spun) C.I. Pipe of Class
Screwed double flanged centrifugally cast
(spun) C.I. Pipe of Class
Screwed double flanged centrifugally cast
(spun) C.I. Pipe of Class
Screwed double flanged centrifugally cast
(spun) C.I. Pipe of Class
Screwed double flanged centrifugally cast
(spun) C./. Pipe of Class
Screwed double flanged centrifugally cast
(spun) C.I. Pipe of Class
Ductile Iron Class K- 7 pipe conforming to
I.S. 8329 - 100 mm diaDuctile Iron Class K- 7 pipe conforming to
I.S. 8329 - 150 mm diaDuctile Iron Class K- 7 pipe conforming to
I.S. 8329 - 200 mm diaDuctile Iron Class K- 7 pipe conforming to
I.S. 8329 - 250 mm diaDuctile Iron Class K- 7 pipe conforming to
I.S. 8329 - 300 mm diaDuctile Iron Class K- 7 pipe conforming to
I.S. 8329 - 350 mm diaDuctile Iron Class K- 7 pipe conforming to
I.S. 8329 - 400 mm diaDuctile Iron Class K- 7 pipe conforming to
I.S. 8329 - 450 mm diaDuctile Iron Class K- 7 pipe conforming to
I.S. 8329 - 500 mm diaDuctile Iron Class K- 7 pipe conforming to
I.S. 8329 - 600 mm diaDuctile Iron Class K- 7 pipe conforming to
I.S. 8329 - 700 mm diaDuctile Iron Class K- 7 pipe conforming to
I.S. 8329 - 800 mm diaDuctile Iron Class K- 7 pipe conforming to
I.S. 8329 - 900 mm dia
37
7735 metre 25143 25143
7736 1000
Nos
8364 8364
7737 1000
Nos
8160 8160
7738 1000
Nos
8007 8007
7739 tonne 56967 56967
7741 tonne 56712 56712
7742 tonne 53040 53040
7743 M.S. pipe 150 mm dia casing
pipe
metre 1576 1576
7744 M.S. pipe 200 mm dia casing
pipe
metre 1948 1948
7745 metre 745 745
7746 metre 1127 1127
7747 M.S. cap 150 mm dia each 224 224
7748 M.S. cap 200 mm dia each 278 278
7749 M.S bail plug 150 mm dia each 278 278
7750 M.S bail plug 200 mm dia each 308 308
7751 metre 668 668
7752 metre 1051 1051
7753 Boulder 50 mm to 200 mm cum 500 459
7754 Gravel 5 mm to 10 mm cum 1350 1250
7755 Gravel 1.5 mm to 2 mm cum 1300 1200
7756 Gravel 3 mm to 6 mm cum 1330 1220
7757 M.S. pipe 100 mm dia casing
pipe
metre 1082 1082
7758 metre 502 502
7759 metre 530 530
7760 M.S. cap 100 mm dia each 181 181
7761 M.S. bail plug 100 mm dia each 224 224
7762 Precast R.C.C. perforated slab each 1024 1024
7763 each 20400 20400
7764 M.S. socket 100 mm dia each 250 250
7765 M.S. socket 150 mm dia each 308 308
7766 M.S. socket 200 mm dia each 389 389
7767 litre 231 231
7768 litre 2224 2224
7769 litre 1431 1431
7770 Turpentine oil litre 100 100
7771 Liquid Amonia 5% litre 225 225
7772 Pea Gravel cum 1127 1127
7773 Coloured inter locking C.C.
paver Block
sqm 745 796
7774 Stone size 10x10x7.50cm each 15 15
7775 Sodium pentachlorophenate kilogram 882 882
7800
sqm 439 479
7801
sqm 439 479
Ductile Iron Class K- 7 pipe conforming to
I.S. 8329 - 1000 mm diaExtruded burnt flyash clay sewer bricks
conforming to I.S 4885
Fly ash lime bricks (FALG Bricks)
conforming to I.S. 12894
Calcium Silicate Bricks machine moulded
conforming to I.S. 4139
Modified Bitumen Refinery produced CRMB
- 55Modified Bitumen Refinery produced CRMB
- 60Bitumen emulsion medium setting (M.S.)
confirming to IS : 8887
PVC blind pipe 150 mm dia as per IS: 12818
PVC blind pipe 200 mm dia as per IS: 12818
PVC slotted pipe 150 mm dia as per IS:
12818PVC slotted pipe 200 mm dia as per IS:
12818
uPVC blind pipe 100 mm dia as per IS:
12818uPVC slotted pipe 100 mm dia as per IS:
12818
Water supply tanker of 5000 litre capacity
Stone cleaning chemical approved by ASI
Water repallent chemical approved by ASI
Stone surface strengthening chemical
approved by ASI
Ceramic Glazed Tiles 1st quality minimum
thickness 5mm in allcolours shades and designs except burgundy,
bottle green, blackCeramic Glazed Tiles 1st quality 300 x 300
mm in all shades anddesigns of White, Ivory, grey, Fume Red
brown etc.
38
7802
sqm 597 602
7803
sqm 694 709
7804
sqm 714 734
7805
724 mm X 578 mm each 5350 5350
7806 each 2601 2601
7807 each 2601 2601
7808 each 612 612
7809 each 660 660
7850 sqm 1573 1573
7857 P.T.M.T. Grating square slit 150
mm
each 108 108
7858 P.T.M.T. Urinal cock 15 mm dia each 168 168
7859 P.T.M.T. Bib cock with nozzle
15 mm
each 204 204
7861 P.T.M.T. Stop cock (concealed)
15 mm
each 220 220
7862
P.T.M.T. Nuts each 41 41
7863
P.T.M.T. Nuts each 57 57
7864 P.T.M.T. extension nipple 15
mm
each 45 45
7865 P.T.M.T. extension nipple 20
mm
each 53 53
7866 P.T.M.T. extension nipple 25
mm
each 80 80
7893 Tactile tile sqm 1224 1224
7895 sqm 1306 1306
7896 Vitrified tile sqm 760 770
7900 1000
Nos
6732 6732
7901
1000
Nos
6477 6477
7902
of class designation 12.5 1000
Nos
7446 7446
7903
of class designation 12.5 1000
Nos
7038 7038
7904
designation 12.5 1000
Nos
7140 7140
8001
sqm 3060 3060
8002
sqm 3162 3162
8003 sqm 3070 3070
8004
Ceramic Glazed Tiles 1st quality 300 x 300
in all shades designsexcept White, Ivory, Grey, Fume Red Brown
etc.Rectified Ceramic Glazed Tiles 1st quality
300 x 300 mm or morein all shades designs White, Ivory, Grey,
Fume Red Brown etc.Rectified Ceramic Glazed Tiles 1st quality
300 x 300 mm or morein all shades designs except White, Ivory,
Grey, Fume Red Brown etc.Salem Stainless steel AISI - 304 (18/8) Orrisa
pattern W.C. pan
Salem Stainless steel AISI - 304 (18/8)
Round basin 405mm X 355 mmSalem Stainless steel AISI - 304 (18/8) Wash
basin 530mm X 345 mmCentrifugally cast (spun) iron S&S 100 mm
inlet and 100 mm outletCentrifugally cast (spun) iron S&S 100 mm
inlet and 75 mm outletAgaria White marble slab plain 18 mm thick
15 mm nominal bore and 30 cm length PVC
connection pipe with
15 mm nominal bore and 45 cm length PVC
connection pipe with
Matt finished vitrified tile 100x100 x16 mm
Modular common burnt clay bricks of class
designation 7.5
Machine moulded perforated common burnt
clay FPS (nonmodular) bricks of class designation 12.5
Machine moulded common burnt clay
modular perforated bricks
Machine moulded common burnt clay FPS
(non modular) bricks
Machine moulded common burnt clay tile
bricks of class
24 mm thick Factory made shutters with
style, rails and panels ofPVC extruded sections in white, grey or
wooden finish30 mm thick Factory made shutters with
style, rails and panels ofPVC extruded sections in white, grey or
wooden finishFactory made PVC rigid foam panelled
shutter i/c carriageFactory made PVC rigid foam panelled
shutter as per IS : 4020 i/
39
c carriage sqm 3448 3448
8006 sqm 270 270
8007 sqm 877 877
8008 sqm 1020 1020
8010
metre 224 224
8011 metre 510 510
8012 Adhesive solvent cement kg 250 250
8014
metre 704 704
8100 10 Nos 128 128
8200 sqm 112 112
8201 sqm 139 139
8203 sqm 143 143
8204 sqm 286 286
8205 sqm 306 306
8206 Bitumen primer for bitumen
membrane
litre 128 128
8207 sqm 66 66
8210 Stainless steel screws 50 mm 100 Nos 428 428
8211 Stainless steel screws 40 mm 100 Nos 388 388
8212 Stainless steel screws 30 mm 100 Nos 352 352
8214 Stainless steel screws 20 mm 100 Nos 265 265
8215 10 Nos 1000 1000
8216 10 Nos 760 760
8217 10 Nos 413 413
8218 10 Nos 286 286
8219
12817 marked 10 Nos 1122 1122
8220
12817 marked 10 Nos 1000 1000
8221
12817 marked 10 Nos 689 689
8222 10 Nos 490 490
8223 10 Nos 275 275
8224 10 nos 138 138
8225 10 Nos 122 122
8300 metre 133 133
8301 metre 175 175
8302 metre 224 224
8303 metre 286 286
8304 metre 474 474
8305 metre 525 525
8501 Polymer modified cementation
coating
kilogram 204 204
8502 Fibre glass cloth sqm 61 61
8504 Multi surface paint litre 408 408
8505 Acrylic exterior paint litre 270 270
Factory made PVC rigid foam sheet 1 mm
thickFactory made PVC rigid foam sheet 5 mm
thickFactory made prelaminated PVC rigid foam
sheet 5 mm thick48mmX40mmX1.5mm thick Factory made
door frame of PVCextruded sections in white, grey or wooden
finishFactory made door frame PVC extruded sheet
i/c carriage
Factory made door frame of size 50x47 mm
with wall thickness 5mm made of single piece extruded profile
Powder coated M.S. butt hinges 100 mm X58
mmX1.9 mmA.P.P. modified polymeric felt (two layers)
1.5 mm thickA.P.P. modified polymeric felt (two layers) 2
mm thickA.P.P. modified 2 mm thick membrane
reinforced with glass fibre mattA.P.P. modified 3 mm thick membrane
reinforced with glass fibre mattA.P.P. modified 3 mm thick membrane
reinforced with polyester matt
Geotextile 120 grams per sqm membrane
Stainless steel butt hinges 125x64x1.9 mm IS
: 12817 markedStainless steel butt hinges 100x58x1.9 mm
IS: 12817 markedStainless steel butt hinges 75x47x1.8 mm IS :
12817 markedStainless steel butt hinges 50x37x1.5 mm IS :
12817 markedStainless steel butt hinges (heavy weight)
125x64x2.5 mm IS :
Stainless steel butt hinges (heavyweight)
100x60x2.5 mm IS :
Stainless steel butt hinges (heavy weight)
75x50x2.5 mm IS :
M.S. heavy weight butt hinges 125x90x4.0
mm IS: 1341 marked.M.S. heavy weight butt hinges 100x75x3.5
mm IS: 1341 markedM.S. heavy weight butt hinges 75x60x3.1
mm IS: 1341 markedM.S. heavy weight butt hinges 50x40x2.5
mm IS : 1341 marked1216 mm PE-AL-PE Composite pressure
pipe1620 mm PE-AL-PE Composite pressure
pipe2025 mm PE-AL-PE Composite pressure
pipe2532 mm PE-AL-PE Composite pressure
pipe3240 mm PE-AL-PE Composite pressure
pipe4050 mm PE-AL-PE Composite pressure
pipe
40
8506 Premium Acrylic exterior paint litre 408 408
8507 Textured exterior paint litre 332 332
8508 Primer for cement paint litre 119 119
8509 Special Primer (C.W.) litre 204 204
8510 Metal Primer (U.G.) litre 224 224
8589
mm thick sqm 1204 1204
8590
(3 metre long) each 270 270
8591
(3.00 metre long) each 175 175
8592
0.33 mm (1.2 metre long) each 112 112
8593
0.33 mm ( 0.6 metre long) each 55 55
8594 each 4 4
8595 each 1 1
8597
size 600x600 mm and 0.5 mm
thick
sqm 1255 1255
8598
sqm 1397 1397
8599
Size 595x595 mm and 0.5 mm
thick
sqm 1132 1132
8600
sqm 1275 1275
8601
mm and 12.5 mm thick sqm 699 699
8602
and 12.5 mm thick sqm 678 678
8604 metre 251 251
8605 metre 219 219
8606 metre 229 229
8607 Spring T-connector each 7 7
8608 C Carrier Connector each 15 15
8609 C Suspension Clip each 16 16
8610 Wire Coupling Clip each 12 12
8611 each 265 265
8612 each 164 164
8613 each 103 103
8614 each 51 51
8615 Hanger rod 4 mm thick each 11 11
8616 Adjustment clip 85x30x0.8 mm each 9 9
8617 Soffit cleat (Size
27x37x25x1.60 mm)
each 5 5
8618 Dash fastener 6 mm dia 50 mm
long
each 15 15
8620 Vitrified floor tile 50x50 cm sqm 1040 1051
8621 Vitrified floor tile 60x60 cm sqm 1122 1137
Calcium Silicate tegular edged celling tiles
595x595 mm and 15
Galvanised Steel main Tee ceiling section
Size 24x38x0.33 mm
Galvanised Steel perimeter wall Angle Size
24 x 24 x 0.40 mm
Galvanised Steel intermediate cross T section
Size 24 x 25 x
Galvanised Steel intermediate cross T section
Size 24 x 25 x
Galvanised Steel soffit cleat size 25x35x1.60
mmWooden screws with plastic rawl plugs 35x8
mmGI Metal Tile Clip in Plain Beveled edge
global white colour tiles of
GI Metal Tile Clip in Perforated Beveled
edge global white colourtiles of size 600x600 mm and 0.5 mm thick
GI Metal Tile Lay-in Plain Tegular edge
global white color tiles of
GI Metal Tile Lay-in Perforated Tegular edge
global white colortiles of Size 595x595 mm and 0.5 mm thick
PVC Laminated Gypsum Tiles (Square edge)
of Size 595x595
Gypsum Tiles Fully Perforated Square edge
of Size 595x595 mm
Spring T-section 24x34x0.45 mm (3.00 meter
long)C Wall angle section 20x30x20x0.50 mm
(3.00 meter long)Main C Carrier Size 10x38x10x0.70 mm
(3.00 meter long)
Main T ceiling sections 24x38x0.3 mm (3
metre long)Perimeter wall angle 24 x 24 x 0.3 mm (3
metre long)Intermediate cross T-Section 24x25x0.3 mm
(1.2 m long)Intermediate cross T-Section 24x25x0.3 mm
(0.6 m long)
41
8622 Vitrified floor tile 80x80 cm sqm 1413 1428
8623 Vitrified floor tile 100x100 cm sqm 1826 1841
8625
16 mm Outer dia metre 52 52
8626
20 mm Outer dia metre 80 80
8627
25 mm outer dia metre 122 122
8628
32 mm Outer dia metre 199 199
8629
40 mm Outer dia metre 301 301
8630
50 mm Outer dia metre 469 469
8631
63 mm Outer dia metre 715 715
8632
75 mm Outer dia metre 969 969
8633
90 mm Outer dia metre 1499 1499
8634
110 mm Outer dia metre 1698 1698
8635
160 mm Outer dia metre 3519 3519
8636 metre 77 77
8637 metre 94 94
8638 metre 133 133
8639 metre 179 179
8640 metre 260 260
8641 metre 408 408
8642 metre 1234 1234
8643 metre 1734 1734
8644 metre 2346 2346
8645 metre 2917 2917
8646 Silicon sealant cartridge 459 459
8647 Stainless steel screws 30 mm x4
mm
100 Nos 48 48
8648
sqm 3213 3213
8649
205 x 19 mm each 275 275
8650
255 x 19 mm each 337 337
8651
355 x 19 mm each 434 434
8652
510 x 19 mm each 775 775
8653
710 x 19 mm each 1377 1377
Poly propylene- Random - Co - Polymer
(PPR) pipes SDR 7.4 -
Poly propylene - Random - Co - Polymer
(PPR) pipes SDR 7.4 -
Poly propylene - Random - Co - polymer
(PPR) pipes SDR 7.4 -
Poly propylene - Random - Co - poymer
(PPR) pipes SDR 7.4 -
Poly propylene - Random - Co - polymer
(PPR) pipes SDR 7.4 -
Poly propylene - Random - Co - polymer
(PPR) pipes SDR 7.4 -
Poly propylene - Random - Co - polymer
(PPR) pipes SDR 7.4 -
Poly propylene - Random - Co - polymer
(PPR) pipes SDR 7.4 -
Poly propylene - Random - Co - polymer
(PPR) pipes SDR 7.4 -
Poly propylene - Random - Co - polymer
(PPR) pipes SDR - 11 -
Poly propylene - Random - Co - polymer
(PPR) pipes SDR - 11-
Chlorinated Polyvinyl - chloride (CPVC)
pipe 15 mm outer diaChlorinated Polyvinyl - chloride (CPVC)
pipe 20 mm outer diaChlorinated Polyvinyl - chloride (CPVC)
pipe 25 mm outer diaChlorinated Polyvinyl - chloride (CPVC)
pipe 32 mm outer diaChlorinated Polyvinyl - chloride (CPVC)
pipe 40 mm outer diaChlorinated Polyvinyl - chloride (CPVC)
pipe 50 mm outer diaChlorinated Polyvinyl - chloride (CPVC)
pipe 62.5 mm inner diaChlorinated Polyvinyl - chloride (CPVC)
pipe 75 mm inner diaChlorinated Polyvinyl - chloride (CPVC)
pipe 100 mm inner diaChlorinated Polyvinyl - chloride (CPVC)
pipe 150 mm inner dia
Hermetically sealed double glazed unit made
with 6 mm thickclear float glass both side having 12 mm air
gapStainless steel (SS 304 grade) adjustable
friction window stay
Stainless steel (SS 304 grade) adjustable
friction window stay
Stainless steel (SS 304 grade) adjustable
friction window stay
Stainless steel (SS 304 grade) adjustable
friction window stay
Stainless steel (SS 304 grade) adjustable
friction window stay
42
8654 Masking tape metre 4 4
8655 cum 4406 4406
8656 Gypsum panel 666 X 500 X 100
mm size
sqm 724 724
8657 Bonding plaster for Gypsum
panel
kg 77 77
8659 Water proof ply 12 mm thick sqm 908 908
8660 each 62 62
8661 each 64 64
8662 each 62 62
8663 each 78 78
8664 each 87 87
8665 each 92 92
8666 Stainless steel screws 25 mm x4
mm
100 Nos 51 51
8667 sqm 663 663
8668 sqm 760 760
8669 Mangalore ridge tiles 20 mm
thick
each 61 66
8670 Mangalore tiles 20 mm thick each 26 29
8671 sqm 622 627
8672 Precoated galvanised steel plain
ridges
metre 617 622
8673 metre 617 619
8674 Precoated galvanised steel gutter metre 638 643
8675 metre 638 643
8676 Precoated galvanised steel barge
board
metre 632 643
8677 Precoated galvanised steel crimp
curve
sqm 668 673
8678 metre 61 61
8682 Epoxy Grout kg 760 760
8683 sqm 653 653
8684 sqm 683 683
8685 Delineator each 398 398
8686 Precast C.C. Kerb stone M - 25 cum 5773 5773
8687 Thermoplastic paint kg 89 89
8688 Glass beads kg 102 102
8689 sqm 663 663
8690 High intensity retro - reflective
sheet
sqm 2040 2040
8691
(Total length 90 m) bundle 1060 1060
8692 RBT reinforced barbed wire metre 12 12
8693 Turn buckle and strengthening
bolt
each set 56 56
8694 each 97 97
8695 0
wire of dia 4 mm sqm 364 364
8696 0
sqm 402 402
8697
Autoclaved aerated cement (AAC) blocks
Aluminium casement window fastener
(Anodised AC 15 )Aluminium casement window fastener
(powder coated )Aluminium casement window fastener
(polyester powder coated)Aluminium round shape handle (anodised
AC 15)Aluminium round shape handle (powder
coated)Aluminium round shape handle (polyester
powder coated)
UV stabilised 2 mm thick plain FRP sheet
UV stabilised 2 mm thick corrugated FRP
sheet
Precoated galvanised iron profile sheet 0.50
mm TCT
Precoated galvanised steel flashings/aprons
Precoated galvanised steel north light curves
1 mm thick 35 mm wide bright finished
stainless steel piano hinges
Red sand stone gang saw cut 30 mm thick
White sand stone gang saw cut 30 mm thick
Interlocking C.C. paver block ( 60 mm thick,
M-30)
Punched tape concertina coil 600 mm dia 10
m openable length
Precast pavement slab 450 x 450 x 50 mm
(M - 30)Chain link fabric fencing mesh of size 50x50
mm made of G.I.
Chain link fabric fencing mesh of size 50x50
mm made of G.I.wire of dia 4 mm, PVC coated to outer dia 5
mmChain link fabric fencing mesh of size 25x25
mm made of G.I.
43
wire of dia 3 mm sqm 474 474
8698
washer for dry stone cladding each 126 126
8699 sqm 510 510
8700 10 mm thick calcium silicate
board
sqm 520 520
8701
standard 48.60 mm outer dia metre 959 959
8702 each 81 81
8703 set 204 204
8704
cabinets shutter each 12 12
8705
metre 204 204
8706 sqm 3279 3279
8707
carriage metre 541 541
8708
door shutter i/c carriage sqm 2662 2662
8709
side) sqm 4049 4049
8710 metre 444 444
8711 sqm 3422 3422
8712
sqm 2958 2958
8713 Fiber glass reinforced plastic
chajja
sqm 5355 5355
8714 Magnetic catcher triple strip
vertical type
each 28 28
8715 each 21 21
8716 each 510 510
8717 sqm 291 291
8719
size 18X5 mm metre 46 46
8720
metre 61 61
8721
metre 36 36
8722 each 3 3
8723 Counter sunk ribbed head
screw 25 mm
100 Nos 112 112
8724 sqm 1377 1377
8725 sqm 1244 1244
8726 1.5 mm thick decorative
laminated sheet
sqm 745 745
8727 1.0 mm thick decorative
laminated sheet
sqm 571 571
8730
shutter i/c carriage sqm 3162 3162
Factory made glass reinforced plastic door
frame 90x45 mm i/c
Stainless steel cramps(weight 260 grams)
with nuts, bolts and
8 mm thick tapered edge calcium silicate
board
SS pipe 304 grades with press fit technology
as per JIS 3448
Coupling/Socket fittings for 15.88 mm outer
dia SS pipe
30 mm thick factory made glass fiber
reinforced plastic panel
30 mm thick factory made solid PVC profile
panelled door singlepiece extruded profile decorative finish
(wood grain printed on both
Factory made solid PVC door frame 60 x 30
mm i/c carriage28 mm factory made solid PVC panel
door shutter i/c carriage
Telescopic drawer channels 300 mm long
Stainless steel roller for sliding arrangement
in racks/ cupboards/
50 mmX42 mmX2 mm thick Factory made
door frame of PVCextruded sections in white, grey or wooden
finish25 mm thick factory made PVC flush door
shutter i/c carriage
100 mm mortice lock with 6 levers for
aluminium door12.5 mm thick Glass fibre reinforced
Gypsum board2nd class teak wood lipping / moulded
beading or Taj beading of
30 mm thick factory made solid PVC
profile panelled door singlepiece extruded profile non decorative
finish
Magnetic catcher double strip horizontal
type
30 mm thick factory made glass fiber
reinforced plastic flush door
Nylon sleeves & wooden screws (40
mm)
12 mm thick marine plywood
conforming to IS: 71012 mm thick fire retardant plywood
conforming to IS: 5509
Ceiling sections 0.55 mm thick having a
knurled web of 51.55 mmand two flanges of 26 mm each with lips
of 10.55 mmPerimeter channel having one flange of
20 mm and another flangeof 30 mm with thickness of 0.55 mm and
web of length 27 mm
44
8731 per kg 26 26
8732
kg 516 516
8733
kg 561 561
8734
47 mm with wall thickness of
5 mm
metre 510 510
8735
sqm 3203 3203
8736
sqm 3896 3896
8737
mm dia wire sqm 1173 1173
8738
vermuculite based concrete
mix
metre 1479 1479
8739
without panel sqm 7487 7487
8740 Fire seal Putty kg 1040 1040
8741 sqm 30294 30294
8742
coating metre 393 393
8743 Matrix Mineral Board metre 92 92
8744 Panic Bar / latch (Double
point)
each 7293 7293
8745
metre 479 479
8746
sqm 3366 3366
8747
metre 536 536
8748
sqm 3631 3631
8750 each 260 260
8751 each 173 173
8752 Zinc alloy rollers for uPVC
windows
each 77 77
8753 Zinc alloy rollers for uPVC door each 122 122
8754 each 148 148
8755
uPVC windows each 337 337
8756
uPVC windows each 408 408
8757
uPVC windows each 541 541
8758
uPVC windows each 612 612
High polymer modified quickset tile
adhesive
P.V.C. Single piece extruded door frame
of profile size 50 mm x
35 mm thick factory made solid panel
PVC door shutter of singlepiece extruded profile non decorative
finished (Matt finished)35 mm thick factory made solid panel
PVC door shutter of single
Synthetic ployster triangular fibre of
length 12 mm, effectivediameter 10-40 microns and specific
gravity of 1.34 to 1.40Synthetic ployster triangular fibre of
length 6 mm, effective diameter10-40 microns and specific gravity of
1.34 to 1.40
G.I. U beading of 16 SWG G.I. sheet
(zinc coating >120gm/ m2)with ceramic tape of suitable thickness
and fire resistant primer
65 mm x 55 mm x 2 mm thick Factory made
door frame of PVC
Fire rated door shuttere made with 16
SWG G.I. sheet( 60 minutes)
Clear fire resistant glass panes 6mm
thick (60 minutes)
piece extruded profile decorative
finished (wood grain finished)Stainless steel wire guage (Grade-304)
aperture 1.4 mm and 0.50
Factory made door frame fire rated ( 60
minutes) made with 16SWG G.I. Sheet of section 143 mm x 57
mm duly filled with
extruded section in white,grey or wooden
finish37 mm thick Factory made shutter with
style,rails and panels ofPVC extruded section in white or grey finish
i/c carriage75 mm x 53 mm x 2.0 mm thick Factory
made door frame of PVCextruded section in white,grey or wooden
finish37 mm thick Factory made fusion welded
shutter with style,railsand panels of PVC extruded section in
wooden finishZinc alloy (white powder coated) casement
handle for uPVC windowsZinc alloy (white powder coated) Touch
Lock for uPVC windows
Zinc alloy (white powder coated) casement
lock for uPVC windowsStainless steel friction hinge of size 200 mm
x 19 x 1.9 mm for
Stainless steel friction hinge of size 250 mm
x 19 x 1.9 mm for
Stainless steel friction hinge of size 300 mm
x 19 x 1.9 mm for
Stainless steel friction hinge of size 350 mm
x 19 x 1.9 mm for
45
8759
uPVC windows each 775 775
8760 metre 245 245
8761
(62 mm x 34 mm) metre 224 224
8762
section) (66 mm x 50 mm) metre 260 260
8763
metre 77 77
8764
18 mm) metre 77 77
8765 metre 337 337
8766
metre 383 383
8767
18 mm) metre 128 128
8768 metre 367 367
8769 metre 337 337
8770
metre 71 71
8771 metre 418 418
8772 metre 36 36
8773 Wool Pine for uPVC window metre 29 29
8774 Aluminium Grill kg 347 347
8775 metre 82 82
8776 each 27 27
8778 Toughened glass 12 mm
thickness
sqm 2703 2703
8779
standard 15.88 mm outer dia metre 199 199
8780
standard 22.22 mm outer dia metre 357 357
8781
standard 28.58 mm outer dia metre 459 459
8782
standard 34.00 mm outer dia metre 663 663
8783
standard 42.70 mm outer dia metre 816 816
8784 sqm 969 969
8786 each 122 122
8787 each 148 148
8788 each 306 306
8789 each 459 459
8790 each 622 622
8791 each 143 143
8792 each 199 199
8793 each 204 204
8795 each 326 326
8796 each 326 326
8797 each 495 495
Stainless steel friction hinge of size 400 mm
x 19 x 1.9 mm for
uPVC extruded profile casement window
Frame (50 mm x 50 mm)uPVC extruded profile casement window
sash (Style and Rail)
uPVC extruded profile casement window
mullion (intermediate
uPVC extruded profile casement window 'T'
profile (one verticallength in between two shutters) (24 mm x
34.5 mm)uPVC extruded profile casement window
glazing bead (12 mm x
uPVC extruded profile casement window
Frame ( 67 mm x 62 mm)uPVC extruded profile casement Window
Sash/Mullion ( 67 mmx 75 mm)(Style,rail and intermediate section)
uPVC extruded profile casement window
glazing bead (35 mm x
uPVC extruded profile Two Track Sliding
frame (67 mm x 52 mm)uPVC extruded profile Sliding window Sash
(60 mm x 44 mm)uPVC extruded profile Sliding Interlock for
Window (one verticallength in each shutter) (45.5 mm x 28 mm)
uPVC extruded profile Sliding Door Sash (80
mm x 44 mm)Aluminium Track on bottom rail for uPVC
window
Steel Galvanised tubular reinforcement for
uPVC door/ windowStainless steel dash fastener of 8 mm dia and
75 mm long bolt
SS pipe 304 grades with press fit technology
as per JIS 3448
SS pipe 304 grades with press fit technology
as per JIS 3448
SS pipe 304 grades with press fit technology
as per JIS 3448
SS pipe 304 grades with press fit technology
as per JIS 3448
SS pipe 304 grades with press fit technology
as per JIS 3448
8 mm thick Calcium silicate perforated tiles
of size 595 x595 mmCoupling/Socket fittings for 22.22 mm outer
dia SS pipeCoupling/Socket fittings for 28.58 mm outer
dia SS pipeCoupling/Socket fittings for 34.00 mm outer
dia SS pipeCoupling/Socket fittings for 42.70 mm outer
dia SS pipeCoupling/Socket fittings for 48.60 mm outer
dia SS pipeReducer for 22.22 mm X 15.88 mm outer Dia
SS pipeReducer for 28.58 mm X 15.88 mm outer Dia
SS pipeReducer for 28.58 mm X 22.22 mm outer Dia
SS pipeReducer for 34.00 mm X 22.22 mm outer Dia
SS pipeReducer for 34.00 mm X 28.58 mm outer Dia
SS pipeReducer for 42.70 mm X 15.88 mm outer Dia
SS pipe
46
8798 each 510 510
8799 each 510 510
8800 each 536 536
8801 each 643 643
8802 each 648 648
8803 each 658 658
8804 each 663 663
8805 each 734 734
8806 each 153 153
8807 each 250 250
8808 each 316 316
8809 each 490 490
8810 each 683 683
8811 each 857 857
8812 each 107 107
8813 each 204 204
8814 each 291 291
8815 each 571 571
8816 each 877 877
8817 each 1020 1020
8818 each 209 209
8819 each 306 306
8820 each 332 332
8821 each 459 459
8822 each 581 581
8823 each 1020 1020
8824 each 235 235
8825 each 347 347
8826 each 434 434
8827 each 969 969
8828 each 1234 1234
8829 each 1678 1678
8830 each 377 377
8831 each 398 398
8832 each 423 423
8833 each 816 816
8834 each 908 908
8835 each 984 984
8836 each 1255 1255
8837 each 1260 1260
8838 each 1224 1224
8839 each 1301 1301
8840 each 1336 1336
8841 each 1352 1352
8842 each 1479 1479
8843 each 1540 1540
8844 each 1693 1693
8845
threaded each 520 520
8846
Reducer for 42.70 mm X 22.22 mm outer Dia
SS pipeReducer for 42.70 mm X 28.58 mm outer Dia
SS pipeReducer for 42.70 mm X 34.00 mm outer Dia
SS pipeReducer for 48.60 mm X 15.88 mm outer Dia
SS pipeReducer for 48.60 mm X 22.22 mm outer Dia
SS pipeReducer for 48.60 mm X 28.58 mm outer Dia
SS pipeReducer for 48.60 mm X 34.00 mm outer Dia
SS pipeReducer for48.60 mm X 42.70 mm outer Dia
SS pipeSlip Coupling / Socket 15.88 mm outer dia
SS pipeSlip Coupling / Socket 22.22 mm outer dia
SS pipeSlip Coupling / Socket 28.58 mm outer dia
SS pipeSlip Coupling / Socket 34.00 mm outer dia
SS pipeSlip Coupling / Socket 42.70 mm outer dia
SS pipeSlip Coupling / Socket 48.60 mm outer dia
SS pipeElbow 90o for 15.88 mm outer dia SS pipe
Elbow 90o for 22.22 mm outer dia SS pipe
Elbow 90o for 28.58 mm outer dia SS pipe
Elbow 90o for 34.00 mm outer dia SS pipe
Elbow 90o for 42.70 mm outer dia SS pipe
Elbow 90o for 48.60 mm outer dia SS pipe
Reducing Elbow 90o for 22.22 mm X 15.88
mm outer dia SS pipeReducing Elbow 90o for 28.58 mm X 15.88
mm outer dia SS pipeReducing Elbow 90o for 28.58 mm X 22.22
mm outer dia SS pipeReducing Elbow 90o for 34.00 mm X 22.22
mm outer dia SS pipeReducing Elbow 90o for 34.00 mm X 28.58
mm outer dia SS pipeReducing Elbow 90o for 42.70 mm X 34.00
mm outer dia SS pipeEqual Tee for 15.88 mm outer dia SS pipe
Equal Tee for 22.22 mm outer dia SS pipe
Equal Tee for 28.58 mm outer dia SS pipe
Equal Tee for 34.00 mm outer dia SS pipe
Equal Tee for 42.70 mm outer dia SS pipe
Equal Tee for 48.60 mm outer dia SS pipe
Reducing Tee for 22.22 mm X 15.88 mm
outer dia SS pipeReducing Tee for 28.58 mm X 15.88 mm
outer dia SS pipeReducing Tee for 28.58 mm X 22.22 mm
outer dia SS pipeReducing Tee for 34.00 mm X 15.88 mm
outer dia SS pipeReducing Tee for 34.00 mm X 22.22 mm
outer dia SS pipeReducing Tee for 34.00 mm X 28.58 mm
outer dia SS pipeReducing Tee for 42.70 mm X 15.88 mm
outer dia SS pipeReducing Tee for 42.70 mm X 22.22 mm
outer dia SS pipeReducing Tee for 42.70 mm X 28.58 mm
outer dia SS pipeReducing Tee for 42.70 mm X 34.00 mm
outer dia SS pipeReducing Tee for 48.60 mm X 15.88 mm
outer dia SS pipeReducing Tee for 48.60 mm X 22.22 mm
outer dia SS pipeReducing Tee for 48.60 mm X 28.58 mm
outer dia SS pipeReducing Tee for 48.60mm X 34.00 mm
outer dia SS pipeReducing Tee for 48.60mm X 42.70mm outer
dia SS pipeMale thread Tee for 15.88 mm outer dia X 15
mm nominal dia
Male thread Tee for 22.22 mm outer dia X 15
mm nominal dia
47
threaded each 581 581
8847
threaded each 627 627
8848
threaded each 658 658
8849
threaded each 734 734
8850
threaded each 882 882
8851
threaded each 969 969
8852
threaded each 1218 1218
8853
threaded each 1229 1229
8854
threaded each 1336 1336
8855
threaded each 1275 1275
8856
threaded each 1326 1326
8857
threaded each 1454 1454
8858
threaded each 1663 1663
8859
threaded each 2142 2142
8860
threaded each 1443 1443
8861
threaded each 1607 1607
8862
threaded each 1627 1627
8863
threaded each 1816 1816
8864
threaded each 2040 2040
8865
threaded each 2581 2581
8866
threaded each 571 571
8867
threaded each 500 500
8868
threaded each 597 597
8869
threaded each 673 673
8870
threaded each 638 638
8871
Male thread Tee for 22.22 mm outer dia X 20
mm nominal dia
Male thread Tee for 28.58 mm outer dia X 15
mm nominal dia
Male thread Tee for 28.58 mm outer dia X 20
mm nominal dia
Male thread Tee for 28.58 mm outer dia X 20
mm nominal dia
Male thread Tee for 34.00 mm outer dia X 15
mm nominal dia
Male thread Tee for 34.00 mm outer dia X 20
mm nominal dia
Male thread Tee for 34.00 mm outer dia X 25
mm nominal dia
Male thread Tee for 34.00 mm outer dia X 32
mm nominal dia
Male thread Tee for 42.70 mm outer dia X 15
mm nominal dia
Male thread Tee for 42.70 mm outer dia X 20
mm nominal dia
Male thread Tee for 42.70 mm outer dia X 25
mm nominal dia
Male thread Tee for 42.70 mm outer dia X 32
mm nominal dia
Male thread Tee for 42.70 mm outer dia X 40
mm nominal dia
Male thread Tee for 48.60 mm outer dia X 15
mm nominal dia
Male thread Tee for 48.60 mm outer dia X 20
mm nominal dia
Male thread Tee for 48.60 mm outer dia X 25
mm nominal dia
Male thread Tee for 48.60 mm outer dia X 32
mm nominal dia
Male thread Tee for 48.60 mm outer dia X 40
mm nominal dia
Male thread Tee for 48.60 mm outer dia X 50
mm nominal dia
Female thread Tee for 15.88 mm outer dia X
15 mm nominal dia
Female thread Tee for 22.22 mm outer dia X
15 mm nominal dia
Female thread Tee for 22.22 mm outer dia X
20 mm nominal dia
Female thread Tee for 28.58 mm outer dia X
15 mm nominal dia
Female thread Tee for 28.58 mm outer dia X
20 mm nominal dia
Female thread Tee for 28.58 mm outer dia X
25 mm nominal dia
48
threaded each 694 694
8872
threaded each 979 979
8873
threaded each 995 995
8874
threaded each 1071 1071
8875
threaded each 1311 1311
8876
threaded each 1265 1265
8877
threaded each 1311 1311
8878
threaded each 1438 1438
8879
threaded each 1505 1505
8880
threaded each 1642 1642
8881
threaded each 1499 1499
8882
threaded each 1515 1515
8883
threaded each 1581 1581
8884
threaded each 1673 1673
8885
threaded each 1749 1749
8886
threaded each 1923 1923
8887
mm nominal threaded each 275 275
8888
mm nominal threaded each 326 326
8889
mm nominal threaded each 337 337
8890
mm nominal threaded each 403 403
8891
mm nominal threaded each 428 428
8892
mm nominal threaded each 505 505
8893
mm nominal threaded each 592 592
8894
mm nominal threaded each 775 775
8895
mm nominal threaded each 831 831
8896
Female thread Tee for 34.00 mm outer dia X
15 mm nominal dia
Female thread Tee for 34.00 mm outer dia X
20 mm nominal dia
Female thread Tee for 34.00 mm outer dia X
25 mm nominal dia
Female thread Tee for 34.00 mm outer dia X
32 mm nominal dia
Female thread Tee for 42.70 mm outer dia X
15 mm nominal dia
Female thread Tee for 42.70 mm outer dia X
20 mm nominal dia
Female thread Tee for 42.70 mm outer dia X
25 mm nominal dia
Female thread Tee for 42.70 mm outer dia X
32 mm nominal dia
Female thread Tee for 42.70 mm outer dia X
40 mm nominal dia
Female thread Tee for 48.60 mm outer dia X
15 mm nominal dia
Female thread Tee for 48.60 mm outer dia X
20 mm nominal dia
Female thread Tee for 48.60 mm outer dia X
25 mm nominal dia
Female thread Tee for 48.60 mm outer dia X
32 mm nominal dia
Female thread Tee for 48.60 mm outer dia X
40 mm nominal dia
Female thread Tee for 48.60 mm outer dia X
50 mm nominal dia
Female threaded Connector/Adapter for
15.88 mm outer dia X 15
Female threaded Connector/Adapter for
22.22 mm outer dia X 15
Female threaded Connector/Adapter for
22.22 mm outer dia X 20
Female threaded Connector/Adapter for
28.58 mm outer dia X 15
Female threaded Connector/Adapter for
28.58 mm outer dia X 20
Female threaded Connector/Adapter for
28.58 mm outer dia X 25
Female threaded Connector/Adapter for
34.00 mm outer dia X 25
Female threaded Connector/Adapter for
34.00 mm outer dia X 32
Female threaded Connector/Adapter for
42.70 mm outer dia X 32
Female threaded Connector/Adapter for
42.70 mm outer dia X 40
49
mm nominal threaded each 969 969
8897
mm nominal threaded each 1224 1224
8898
mm nominal threaded each 1382 1382
8899
mm nominal threaded each 296 296
8900
mm nominal threaded each 337 337
8901
mm nominal threaded each 372 372
8902
mm nominal threaded each 469 469
8903
mm nominal threaded each 490 490
8904
mm nominal threaded each 648 648
8905
mm nominal threaded each 806 806
8906
mm nominal threaded each 918 918
8907
mm nominal threaded each 1122 1122
8908
mm nominal threaded each 1285 1285
8909
mm nominal threaded each 1714 1714
8910
threaded each 337 337
8911
threaded each 403 403
8912
threaded each 469 469
8913
threaded each 592 592
8914
threaded each 898 898
8915
threaded each 1265 1265
8916
threaded each 1851 1851
8917
nominal dia threaded each 306 306
8918
nominal dia threaded each 403 403
8919
nominal dia threaded each 423 423
8920
nominal dia threaded each 612 612
8921
Female threaded Connector/Adapter for
48.60 mm outer dia X 40
Female threaded Connector/Adapter for
48.60 mm outer dia X 50
Male threaded Connector/Adapter for 15.88
mm outer dia X 15
Male threaded Connector/Adapter for 22.22
mm outer dia X 15
Male threaded Connector/Adapter for 22.22
mm outer dia X 20
Male threaded Connector/Adapter for 28.58
mm outer dia X 20
Male threaded Connector/Adapter for 28.58
mm outer dia X 25
Male threaded Connector/Adapter for 34.00
mm outer dia X 25
Male threaded Connector/Adapter for 34.00
mm outer dia X 32
Male threaded Connector/Adapter for 42.70
mm outer dia X 32
Male threaded Connector/Adapter for 42.70
mm outer dia X 40
Male threaded Connector/Adapter for 48.60
mm outer dia X 40
Male threaded Connector/Adapter for 48.60
mm outer dia X 50
Valve Connector for 15.88 mm outer dia X
15 mm nominal dia
Valve Connector for 22.22 mm outer dia X
15 mm nominal dia
Valve Connector for 22.22 mm outer dia X
20 mm nominal dia
Valve Connector for 28.58 mm outer dia X
25 mm nominal dia
Valve Connector for 34.00 mm outer dia X
32 mm nominal dia
Valve Connector for 42.70 mm outer dia X
40 mm nominal dia
Valve Connector for 48.60 mm outer dia X
50 mm nominal dia
Female Threaded Elbow 90o for 15.88 mm
outer dia X 15 mm
Female Threaded Elbow 90o for 22.22 mm
outer dia X 15 mm
Female Threaded Elbow 90o for 22.22 mm
outer dia X 20 mm
Female Threaded Elbow 90o for 28.58 mm
outer dia X 25 mm
Female Threaded Elbow 90o for 34.00 mm
outer dia X 32 mm
50
nominal dia threaded each 1112 1112
8922
nominal dia threaded each 1372 1372
8923
nominal dia threaded each 1489 1489
8924
nominal dia threaded each 1581 1581
8925
nominal dia threaded each 1811 1811
8926
dia threaded each 306 306
8927
dia threaded each 398 398
8928
dia threaded each 418 418
8929
dia threaded each 541 541
8930
dia threaded each 893 893
8931
dia threaded each 1224 1224
8932
dia threaded each 1392 1392
8933
dia threaded each 1520 1520
8934
dia threaded each 1902 1902
8935
dia threaded each 2040 2040
8936 Cap for 15.88 mm outer dia pipe each 71 71
8937 Cap for 22.22 mm outer dia pipe each 92 92
8938 Cap for 28.58 mm outer dia pipe each 122 122
8939 Cap for 34.00 mm outer dia pipe each 245 245
8940 Cap for 42.70 mm outer dia pipe each 362 362
8941 Cap for 48.60 mm outer dia pipe each 469 469
8942 Pipe Bridge for 15.88 mm outer
dia pipe
each 306 306
8943 Pipe Bridge for 15.88 mm outer
dia pipe
each 383 383
8944 Pipe Bridge for 28.58 mm outer
dia pipe
each 576 576
8945 4 Point facade glass bracket Nos 4672 4672
8946 2 Point facade glass bracket Nos 2336 2336
8947 1 Point facade glass bracket Nos 1979 1979
8948 Flate head bolt Nos 918 918
8949 400 fin plate at top pair 8349 8349
8953 Micro Silica kg 45 45
Male Threaded Elbow 90o for 42.70 mm
outer dia X 32 mm nominal
Male Threaded Elbow 90o for 42.70 mm
outer dia X40 mm nominal
Female Threaded Elbow 90o for 42.70 mm
outer dia X 32 mm
Female Threaded Elbow 90o for 42.70 mm
outer dia X40 mm
Female Threaded Elbow 90o for 48.60 mm
outer dia X 40 mm
Female Threaded Elbow 90o for 48.60 mm
outer dia X 50 mm
Male Threaded Elbow 90o for 15.88 mm
outer dia X 15 mm nominal
Male Threaded Elbow 90o for 22.22 mm
outer dia X 15 mm nominal
Male Threaded Elbow 90o for 48.60 mm
outer dia X 40 mm nominal
Male Threaded Elbow 90o for 48.60 mm
outer dia X 50 mm nominal
Male Threaded Elbow 90o for 22.22 mm
outer dia X 20 mm nominal
Male Threaded Elbow 90o for 28.58 mm
outer dia X 25 mm nominal
MaleThreaded Elbow 90o for 34.00 mm
outer dia X 25 mm nominal
Male Threaded Elbow 90o for 34.00 mm
outer dia X 32 mm nominal
51
8954 sqm 6 6
8955 sqm 101 101
9999 Sundries L.S. 3 3
cum 75000 75000
cum 18500 18500
cum 2750 2750
100Nos. 3000 3000
100Nos. 3200 3200
100Nos. 2800 2800
100Nos. 2400 2400
100Nos. 1600 1600
sqm 310 310
sqm 330 330
310 310
m 160 160
100 Nos. 1300 1200
m3 1300 1200
Solid Concrete Block 40x20x10
Solid Concrete Block 30x20x15
Solid Concrete Block 30x20x10
Stop end tubes for diaphragmwall 600 mm
dia.Driving end tubes for diaphragm wall 600
mm dia.
Anjiliwood Scanthing
Mango wood
Not included in the DSR
EXECUTIVE ENGINEER
Powder Coated G.I. Corregated Sheet
0.40mm thick
Alloy Zinc sheet
GI sheet powder coated
Coconut pile
Coconut cadjan
Gravelly Earth
M.Sand
Solid Concrete Block 40x20x15 cm
Solid Concrete Block 40x20x20
52
top related