qualkitdo rptgenext qualificationreport sdd truth table model
Post on 07-Aug-2018
223 Views
Preview:
TRANSCRIPT
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
1/45
SDD_truth_table_model.slx
Design Description
The MathWorks, Inc.
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
2/45
SDD_truth_table_model.slx
2
SDD_truth_table_model.slx: Design DescriptionThe MathWorks, Inc.
Publication date 13-Aug-2015 04:07:18
Copyright © 2015
For Internal Distribution Only
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
3/45
iii
Table of Contents
1. Model Version ............................................................. ................................................... 1
2. Root System ................................................................................... ................................ 2
Description ................................................. ........................................................ ........ 2
Blocks ....................................................................................................................... 2
Parameters .................................................................. ....................................... 2Block Execution Order ......................................................................................... 4
State Charts ................................ ........................................................ ........................ 5
Chart ................................................................................................................. 5
States ................................................ ....................................................... ......... 5
Data .................................................... ....................................................... ....... 6
Chart ................................................................................................................. 7
States ................................................ ....................................................... ......... 7
Data .................................................... ....................................................... ....... 8
3. Subsystems ............................................................ ........................................................ . 9
3 way source ....................................................... ....................................................... 9
Blocks ............................................................................................................... 9
3 way source1 ............................................................... ............................................ 12
Blocks .................................................... ........................................................ . 12
LinkC ................................................................................... ................................... 15
Blocks .................................................... ........................................................ . 15
State Charts ...................................... ....................................................... ......... 17
Repeating Sequence ..... ...... ..... ..... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... ...... ..... 18
Blocks .................................................... ........................................................ . 18
4. System Design Variables ..... ..... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ... 24
Design Variable Summary ..... ...... ..... ...... ..... ..... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ... 24
5. System Model Configuration ...... ..... ...... ..... ..... ...... ..... ...... ..... ...... ...... ..... ...... ..... ..... ...... .... 25
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
4/45
iv
List of Figures
2.1. SDD_truth_table_model .................................................................................................. 2
3.1. SDD_truth_table_model/3 way source ..... ..... ...... ..... ..... ...... ..... ...... ..... ...... ...... ..... ...... ..... ... 9
3.2. SDD_truth_table_model/3 way source1 ..... ..... ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... ...... .... 12
3.3. SDD_truth_table_model/LinkC ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... .. 15
3.4. SDD_truth_table_model/3 way source/Repeating Sequence .................................................. 183.5. Look-Up Table1 ........................................................ .................................................. 21
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
5/45
v
List of Tables
2.1. "Constant" Parameters .................................................................................................... 2
2.2. "Demux" Parameters ...................................................................................................... 3
2.3. "Demux2" Parameters ..... ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... ...... ..... 3
2.4. "Demux3" Parameters ..... ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... ...... ..... 3
2.5. Data - cond1 ................................................................................................................ 62.6. Data - cond2 ................................................................................................................ 6
2.7. Data - cond3 ................................................................................................................ 6
2.8. Data - in1 ... .................................... ............................................... .............................. 6
2.9. Data - in2 ... ................................. .................................................. .............................. 6
2.10. Data - in3 ............................................... ................................................................... 6
2.11. Data - out ..................................... ............................................................................. 6
2.12. Data - out .................................................. ................................................................ 6
2.13. Data - cond1 ............................................................................................................... 8
2.14. Data - cond2 ............................................................................................................... 8
2.15. Data - cond3 ............................................................................................................... 8
2.16. Data - cond4 ............................................................................................................... 8
2.17. Data - in1 ....................... ........................................................................................... 8
2.18. Data - in2 ....................... ........................................................................................... 8
2.19. Data - in3 ........................... ....................................................................................... 8
2.20. Data - in4 ........................... ....................................................................................... 8
2.21. Data - out .................................. ................................................................................ 8
2.22. Data - out ................................ .................................................................................. 8
3.1. "Constant" Parameters ..... ..... ..... ..................................................................................... 9
3.2. "Constant1" Parameters ..... ...... ..... ................................................................................ 10
3.3. "Constant2" Parameters ................................................................................................ 10
3.4. "Multiport Switch1" Parameters . ... ... ... ........................................................................... 11
3.5. "Out1" Parameters .............................. ......................................................................... 11
3.6. "Constant" Parameters .................................................................................................. 12
3.7. "Constant1" Parameters ................................................................................................ 13
3.8. "Constant2" Parameters ................................................................................................ 133.9. "Multiport Switch1" Parameters . ... ... ... ........................................................................... 14
3.10. "Out1" Parameters ..................................................................................................... 14
3.11. "In1" Parameters ........................................................................................................ 15
3.12. "In2" Parameters ........................................................................................................ 16
3.13. "Out1" Parameters ..... ..... ........................................................................................... 16
3.14. Data - cond1 ............................................................................................................. 18
3.15. Data - cond2 ............................................................................................................. 18
3.16. Data - in1 ....................... .......................................................................................... 18
3.17. Data - in2 ....................... .......................................................................................... 18
3.18. Data - out ........................... ...................................................................................... 18
3.19. Data - out ........................... ...................................................................................... 18
3.20. "Clock" Parameters . ...... ..... ........................................................................................ 18
3.21. "Constant" Parameters ................................................................................................ 193.22. "Look-Up Table1" Parameters ...................................................................................... 19
3.23. Look-Up Table1 (:,:) .................................................................................................. 21
3.24. "Math Function" Parameters ........................................................................................ 21
3.25. "Out1" Parameters ..................................................................................................... 22
3.26. "Output" Parameters ................................................................................................... 22
3.27. "startTime" Parameters . ... ... ........................................................................................ 23
3.28. "Sum" Parameters ...... ..... ........................................................................................... 23
4.1. Functions used in Design Variable Expressions ...... ...... ..... ...... ..... ..... ...... ..... ...... ..... ...... .... 24
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
6/45
SDD_truth_table_model.slx
vi
5.1. SDD_truth_table_model Configuration Set .. ..... ...... ...... ..... ...... ..... ...... ...... ..... ...... ..... ..... ... 25
5.2. SDD_truth_table_model Configuration Set.Components(1) .... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 25
5.3. SDD_truth_table_model Configuration Set.Components(2) .... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 26
5.4. SDD_truth_table_model Configuration Set.Components(3) .... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 27
5.5. SDD_truth_table_model Configuration Set.Components(4) .... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 28
5.6. SDD_truth_table_model Configuration Set.Components(5) .... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 31
5.7. SDD_truth_table_model Configuration Set.Components(6) .... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 325.8. SDD_truth_table_model Configuration Set.Components(7) .... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 32
5.9. SDD_truth_table_model Configuration Set.Components(8) .... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 33
5.10. SDD_truth_table_model Configuration Set.Components(9) ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 35
5.11. SDD_truth_table_model Configuration Set.Components(8).Components(1) .. .. .. .. .. .. .. .. .. .. .. .. .. . 36
5.12. SDD_truth_table_model Configuration Set.Components(8).Components(2) .. .. .. .. .. .. .. .. .. .. .. .. .. . 37
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
7/45
1
Chapter 1. Model VersionVersion: 1.18
Last modified: Thu Mar 28 07:51:40 2013
Checksum: 1113995358 2397200176 201716651 2463850836
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
8/45
2
Chapter 2. Root System
Table of Contents
Description ............................................... ........................................................ .................. 2
Blocks ............................................................................................................................... 2
Parameters ................................................................ ................................................. 2
Block Execution Order ................................................................................................. 4
State Charts ................................................. ....................................................... ................ 5
Chart ......................................................................................................................... 5
States ....................................................... ........................................................ ......... 5
Data .................................................. ........................................................ ................ 6
Chart ......................................................................................................................... 7
States ....................................................... ........................................................ ......... 7
Data .................................................. ........................................................ ................ 8
Figure 2.1. SDD_truth_table_model
Copyright 2009-2011 The MathWorks, Inc.
Simulink Report Generator (SDD Report) Test Model
SDD_truth_table_model
In1
In2
Out1
LinkC
in1
in2
in3
in4
out
LinkA
[1 0]
in1
in2
in3
out
ChartC
Out1
3 way source1
Out1
3 way source
Description
Simulink Report Generator (SDD Report) Test Model
Blocks
Parameters
"Constant" (Constant)
Table 2.1. "Constant" Parameters
Parameter Value
Constant value [1 0]
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
9/45
Root System
3
Parameter Value
Interpret vector paramet-
ers as 1-D
on
Output minimum []
Output maximum []
Output data type Inherit: Inherit from 'Constant value'
Lock output data type se-
tting against changes by
the fixed-point tools
off
Sample time inf
Frame period inf
"Demux" (Demux)
Table 2.2. "Demux" Parameters
Parameter Value
Number of outputs 4
Display option none
Bus selection mode off
"Demux2" (Demux)
Table 2.3. "Demux2" Parameters
Parameter Value
Number of outputs 3
Display option none
Bus selection mode off
"Demux3" (Demux)
Table 2.4. "Demux3" Parameters
Parameter Value
Number of outputs 2
Display option none
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
10/45
Root System
4
Parameter Value
Bus selection mode off
Block Execution Order
1. Constant [9] (Constant)
2. Constant1 [10] (Constant)
3. Constant2 [10] (Constant)
4. Clock [18] (Clock)
5. startTime [22] (S-Function)
6. Sum [23] (Sum)
7. Constant [19] (Constant)
8. Math Function [21] (Math)
9. Look-Up Table1 [19] (Lookup_n-D)
10. Multiport Switch1 [11] (MultiPortSwitch)
11. LinkA
1. SFunction (S-Function)
12. Constant [12] (Constant)
13. Constant1 [13] (Constant)
14. Constant2 [13] (Constant)
15. Clock (Clock)
16. startTime (S-Function)
17. Sum (Sum)
18. Constant (Constant)
19. Math Function (Math)20. Look-Up Table1 (Lookup_n-D)
21. Multiport Switch1 [14] (MultiPortSwitch)
22. ChartC
1. SFunction (S-Function)
23. Constant [2] (Constant)
24. ChartB
1. SFunction (S-Function)
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
11/45
Root System
5
State Charts
Chart
out = table3(cond1,cond2,cond3)
truthtable
{out = table3(in1,in2,in3);}
1
2
table3 [5]
{out = table3(in1,in2,in3);}
States
TruthTable - table3
out = table3(cond1,cond2,cond3)
truthtable
T - - -
- T - -
- - T -
Actions: 1 2 3 5
1 out = 1;
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
12/45
Root System
6
2 out = 2;
3 out = 3;
4 out = 4;
5 out = 5;
Data
Table 2.5. Data - cond1
Scope Input
Table 2.6. Data - cond2
Scope Input
Table 2.7. Data - cond3
Scope Input
Table 2.8. Data - in1
Scope Input
Table 2.9. Data - in2
Scope Input
Table 2.10. Data - in3
Scope Input
Table 2.11. Data - out
Scope Output
Table 2.12. Data - out
Scope Output
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
13/45
Root System
7
Chart
out = table1(cond1,cond2,cond3,cond4)
truthtable
{out = table1(in1,in2,in3,in4);}
1
2
table1 [7]
{out = table1(in1,in2,in3,in4);}
StatesTruthTable - table1
out = table1(cond1,cond2,cond3,cond4)
truthtable
T F F F -
F T F F -
F F T F -
F F F T -
Actions: 1 2 3 4 5
1 out = 1;
2 out = 2;
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
14/45
Root System
8
3 out = 3;
4 out = 4;
5 out = 5;
Data
Table 2.13. Data - cond1
Scope Input
Table 2.14. Data - cond2
Scope Input
Table 2.15. Data - cond3
Scope Input
Table 2.16. Data - cond4
Scope Input
Table 2.17. Data - in1
Scope Input
Table 2.18. Data - in2
Scope Input
Table 2.19. Data - in3
Scope Input
Table 2.20. Data - in4
Scope Input
Table 2.21. Data - out
Scope Output
Table 2.22. Data - out
Scope Output
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
15/45
9
Chapter 3. Subsystems
Table of Contents
3 way source .................................................................................................. .................... 9
Blocks ....................................................................................................................... 9
3 way source1 ............................................................ ....................................................... 12
Blocks .................................................. ........................................................ ........... 12
LinkC ................................................................................. ............................................. 15
Blocks .................................................. ........................................................ ........... 15
State Charts ....... ........................................................ ............................................... 17
Repeating Sequence ...... ..... ...... ..... ..... ...... ..... ...... ..... ...... ...... ..... ...... ..... ..... ...... ..... ...... ..... ... 18
Blocks .................................................. ........................................................ ........... 18
3 way source
Figure 3.1. SDD_truth_table_model/3 way source
1
Out1
0
1
*, 2
Multiport
Switch1[1 1 1 1]
[0 0 1 0]
[1 0 0 0]
Blocks
Parameters
"Constant" (Constant)
Table 3.1. "Constant" Parameters
Parameter Value
Constant value [1 0 0 0]
Interpret vector paramet-
ers as 1-D
on
Output minimum []
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
16/45
Subsystems
10
Parameter Value
Output maximum []
Output data type Inherit: Inherit from 'Constant value'
Lock output data type se-
tting against changes by
the fixed-point tools
off
Sample time inf
Frame period inf
"Constant1" (Constant)
Table 3.2. "Constant1" Parameters
Parameter Value
Constant value [0 0 1 0]
Interpret vector paramet-
ers as 1-D
on
Output minimum []
Output maximum []
Output data type Inherit: Inherit from 'Constant value'
Lock output data type se-
tting against changes by
the fixed-point tools
off
Sample time inf
Frame period inf
"Constant2" (Constant)
Table 3.3. "Constant2" Parameters
Parameter Value
Constant value [1 1 1 1]
Interpret vector paramet-
ers as 1-D
on
Output minimum []
Output maximum []
Output data type Inherit: Inherit from 'Constant value'
Lock output data type se-
tting against changes by
the fixed-point tools
off
Sample time inf
Frame period inf
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
17/45
Subsystems
11
"Multiport Switch1" (MultiPortSwitch)
Table 3.4. "Multiport Switch1" Parameters
Parameter Value
Data port order Zero-based contiguous
Number of data ports 3
Data port indices (e.g. {1,
[2,3]})
{1,2,3}
Data port for default case Last data port
Diagnostic for default ca-
se
Error
Require all data port inp-
uts to have the same data
type
off
Output minimum []
Output maximum []
Output data type Inherit: Inherit via internal rule
Lock output data type se-
tting against changes by
the fixed-point tools
off
Integer rounding mode Floor
Saturate on integer overf-
low
on
Sample time (-1 for inhe-
rited)
-1
Allow different data inp-
ut sizes (Results in varia-
ble-size output signal)
off
"Out1" (Outport)
Table 3.5. "Out1" Parameters
Parameter Value
Port number 1
Icon display Port number
Minimum []
Maximum []
Data type Inherit: auto
Lock output data type se-
tting against changes by
the fixed-point tools
off
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
18/45
Subsystems
12
Parameter Value
Output as nonvirtual bus
in parent model
off
Port dimensions (-1 for
inherited)
-1
Variable-size signal Inherit
Sample time (-1 for inhe-
rited)
-1
Source of initial output
value
Dialog
Output when disabled held
Initial output []
3 way source1Figure 3.2. SDD_truth_table_model/3 way source1
1
Out1
0
1
*, 2
Multiport
Switch1[0 0 1]
[0 1 0]
[1 0 0]
Blocks
Parameters
"Constant" (Constant)
Table 3.6. "Constant" Parameters
Parameter Value
Constant value [1 0 0]
Interpret vector paramet-
ers as 1-D
on
Output minimum []
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
19/45
Subsystems
13
Parameter Value
Output maximum []
Output data type Inherit: Inherit from 'Constant value'
Lock output data type se-
tting against changes by
the fixed-point tools
off
Sample time inf
Frame period inf
"Constant1" (Constant)
Table 3.7. "Constant1" Parameters
Parameter Value
Constant value [0 1 0]
Interpret vector paramet-
ers as 1-D
on
Output minimum []
Output maximum []
Output data type Inherit: Inherit from 'Constant value'
Lock output data type se-
tting against changes by
the fixed-point tools
off
Sample time inf
Frame period inf
"Constant2" (Constant)
Table 3.8. "Constant2" Parameters
Parameter Value
Constant value [0 0 1]
Interpret vector paramet-
ers as 1-D
on
Output minimum []
Output maximum []
Output data type Inherit: Inherit from 'Constant value'
Lock output data type se-
tting against changes by
the fixed-point tools
off
Sample time inf
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
20/45
Subsystems
14
Parameter Value
Frame period inf
"Multiport Switch1" (MultiPortSwitch)
Table 3.9. "Multiport Switch1" Parameters
Parameter Value
Data port order Zero-based contiguous
Number of data ports 3
Data port indices (e.g. {1,
[2,3]})
{1,2,3}
Data port for default case Last data port
Diagnostic for default ca-
se
Error
Require all data port inp-
uts to have the same data
type
off
Output minimum []
Output maximum []
Output data type Inherit: Inherit via internal rule
Lock output data type se-
tting against changes by
the fixed-point tools
off
Integer rounding mode Floor
Saturate on integer overf-low
on
Sample time (-1 for inhe-
rited)
-1
Allow different data inp-
ut sizes (Results in varia-
ble-size output signal)
off
"Out1" (Outport)
Table 3.10. "Out1" ParametersParameter Value
Port number 1
Icon display Port number
Minimum []
Maximum []
Data type Inherit: auto
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
21/45
Subsystems
15
Parameter Value
Lock output data type se-
tting against changes by
the fixed-point tools
off
Output as nonvirtual bus
in parent model
off
Port dimensions (-1 for
inherited)
-1
Variable-size signal Inherit
Sample time (-1 for inhe-
rited)
-1
Source of initial output
value
Dialog
Output when disabled held
Initial output []
LinkC
Figure 3.3. SDD_truth_table_model/LinkC
1
Out1
in1
in2
out
ChartB
2
In2
1
In 1
Blocks
Parameters
"In1" (Inport)
Table 3.11. "In1" Parameters
Parameter Value
Port number 1
Port dimensions (-1 for
inherited)
-1
Sample time (-1 for inhe-
rited)
-1
Minimum []
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
22/45
Subsystems
16
Parameter Value
Maximum []
Data type Inherit: auto
"In2" (Inport)
Table 3.12. "In2" Parameters
Parameter Value
Port number 2
Port dimensions (-1 for
inherited)
-1
Sample time (-1 for inhe-
rited)
-1
Minimum []
Maximum []
Data type Inherit: auto
"Out1" (Outport)
Table 3.13. "Out1" Parameters
Parameter Value
Port number 1
Icon display Port number
Minimum []
Maximum []
Data type Inherit: auto
Lock output data type se-
tting against changes by
the fixed-point tools
off
Output as nonvirtual bus
in parent model
off
Port dimensions (-1 for
inherited)
-1
Variable-size signal Inherit
Sample time (-1 for inhe-
rited)
-1
Source of initial output
value
Dialog
Output when disabled held
Initial output []
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
23/45
Subsystems
17
State Charts
Chart
out = table2(cond1,cond2)truthtable
{out = table2(in1,in2);}
1
2
table2 [17]
{out = table2(in1,in2);}
States
TruthTable - table2
out = table2(cond1,cond2)truthtable
T F T F
F T T F
Actions: 1 2 3 4
1 out = 1;
2 out = 2;
3 out = 3;
4 out = 4;
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
24/45
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
25/45
Subsystems
19
"Constant" (Constant)
Table 3.21. "Constant" Parameters
Parameter Value
Constant value period
Interpret vector paramet-
ers as 1-D
on
Output minimum []
Output maximum []
Output data type Inherit: Inherit from 'Constant value'
Lock output data type se-
tting against changes by
the fixed-point tools
off
Sample time inf
Frame period inf
"Look-Up Table1" (Lookup_n-D)
Table 3.22. "Look-Up Table1" Parameters
Parameter Value
Number of table dimens-
ions
1
Breakpoints specification Explicit values
Breakpoints for dimensi-
on 1
rep_seq_t - min(rep_seq_t)
Breakpoints First Point
for dimension 1
1
Breakpoints Spacing for
dimension 1
1
Breakpoints minimum
for dimension 1
[]
Breakpoints maximum
for dimension 1
[]
Breakpoints data type fordimension 1
Inherit: Same as corresponding input
Index search method Binary search
Begin index search using
previous index result
off
Use one input port for all
input data
off
Table data rep_seq_y
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
26/45
Subsystems
20
Parameter Value
Table minimum []
Table maximum []
Table data type Inherit: Same as output
Intermediate results data
type
Inherit: Same as output
Interpolation method Linear
Extrapolation method Linear
Diagnostic for out-of-ra-
nge input
None
Remove protection agai-
nst out-of-range input in
generated code
off
Use last table value for
inputs at or above last br-
eakpoint
off
Sample time (-1 for inhe-
rited)
-1
Internal rule priority Speed
Require all inputs to have
the same data type
on
Output minimum []
Output maximum []
Output data type Inherit: Same as first input
Lock data type settings
against changes by the fi-
xed-point tools
off
Integer rounding mode Floor
Saturate on integer overf-
low
on
Fraction data type Inherit: Inherit via internal rule
Support tunable table size
in code generation
off
Maximum indices for ea-
ch dimension
[]
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
27/45
Subsystems
21
Figure 3.5. Look-Up Table1
Table 3.23. Look-Up Table1 (:,:)
0 0
3 0
3.0000 1
6 1
6.0000 2
10 2
"Math Function" (Math)
Table 3.24. "Math Function" Parameters
Parameter Value
Function rem
Sample time (-1 for inhe-
rited)
-1
Output minimum []
Output maximum []Output data type Inherit: Same as first input
Lock output data type se-
tting against changes by
the fixed-point tools
off
Integer rounding mode Floor
Saturate on integer overf-
low
on
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
28/45
Subsystems
22
Parameter Value
Intermediate results data
type
Inherit: Inherit via internal rule
Method Newton-Raphson
Number of iterations 3
"Out1" (Outport)
Table 3.25. "Out1" Parameters
Parameter Value
Port number 1
Icon display Port number
Minimum []
Maximum []Data type Inherit: auto
Lock output data type se-
tting against changes by
the fixed-point tools
off
Output as nonvirtual bus
in parent model
off
Port dimensions (-1 for
inherited)
-1
Variable-size signal Inherit
Sample time (-1 for inhe-
rited)
-1
Source of initial output
value
Dialog
Output when disabled held
Initial output []
"Output" (SignalConversion)
Table 3.26. "Output" Parameters
Parameter Value
Output Signal copy
Data type Inherit: auto
Exclude this block from
'Block reduction' optimi-
zation
off
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
29/45
Subsystems
23
"startTime" (S-Function)
Table 3.27. "startTime" Parameters
Parameter Value
S-function name sfun_tstart
S-function modules ''
"Sum" (Sum)
Table 3.28. "Sum" Parameters
Parameter Value
Icon shape rectangular
List of signs +-
Sum over All dimensions
Dimension 1
Require all inputs to have
the same data type
on
Accumulator data type Inherit: Inherit via internal rule
Output minimum []
Output maximum []
Output data type Inherit: Same as first input
Lock data type settings
against changes by the fi-
xed-point tools
off
Integer rounding mode Floor
Saturate on integer overf-
low
on
Sample time (-1 for inhe-
rited)
-1
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
30/45
24
Chapter 4. System Design Variables
Table of Contents
Design Variable Summary ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... ...... ..... .... 24
Design Variable Summary
Table 4.1. Functions used in Design Variable Expressions
Function Na-
me
Parent Blocks Calling string
eps Repeating Sequence [12]
Repeating Sequence [15]
[0 3 3+eps(3) 6 6+ep-
s(6) 10]
[0 3 3+eps(3) 6 6+ep-
s(6) 10]
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
31/45
25
Chapter 5. System Model ConfigurationSource: Model
Source Name: SDD_truth_table_model
Table 5.1. SDD_truth_table_model Configuration Set
Property Value
Description
Components [SDD_truth_table_model Configuration Set.Com-
ponents(1) [25], SDD_truth_table_model Co-
nfiguration Set.Components(2) [26], SDD_tr-
uth_table_model Configuration Set.Components(-
3) [27], SDD_truth_table_model Configurati-
on Set.Components(4) [28], SDD_truth_table-
_model Configuration Set.Components(5) [31],
SDD_truth_table_model Configuration Set.Comp-onents(6) [32], SDD_truth_table_model Con-
figuration Set.Components(7) [32], SDD_tru-
th_table_model Configuration Set.Components(8-
) [33], SDD_truth_table_model Configuration
Set.Components(9) [35]]
Name Configuration
SimulationMode normal
Table 5.2. SDD_truth_table_model Configuration Set.Components [25](1)
Property Value
Name Solver
Description
Components
StartTime 0.0
StopTime 10.0
AbsTol auto
FixedStep 1
InitialStep auto
MaxNumMinSteps -1
MaxOrder 5
ZcThreshold auto
ConsecutiveZCsStepRelTol 10*128*eps
MaxConsecutiveZCs 1000
ExtrapolationOrder 4
NumberNewtonIterations 1
MaxStep auto
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
32/45
System Model Configuration
26
MinStep auto
MaxConsecutiveMinStep 1
RelTol 1e-3
SolverMode Auto
EnableConcurrentExecution off
ConcurrentTasks off
Solver FixedStepDiscrete
SolverName FixedStepDiscrete
SolverType Fixed-step
SolverJacobianMethodControl auto
ShapePreserveControl DisableAll
ZeroCrossControl UseLocalSettings
ZeroCrossAlgorithm Nonadaptive
SolverResetMethod Fast
PositivePriorityOrder off
AutoInsertRateTranBlk off
SampleTimeConstraint Unconstrained
InsertRTBMode Whenever possible
SampleTimeProperty
Table 5.3. SDD_truth_table_model Configuration Set.Components [25](2)
Property Value
Name Data Import/Export
Description
Components
Decimation 1
ExternalInput [t, u]
FinalStateName xFinal
InitialState xInitial
LimitDataPoints on
MaxDataPoints 1000
LoadExternalInput off
LoadInitialState off
SaveFinalState off
SaveCompleteFinalSimState off
SaveFormat Array
SignalLoggingSaveFormat ModelDataLogs
SaveOutput on
SaveState off
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
33/45
System Model Configuration
27
SignalLogging on
DSMLogging on
InspectSignalLogs off
VisualizeSimOutput on
StreamToWorkspace off
StreamVariableName streamout
SaveTime on
ReturnWorkspaceOutputs off
StateSaveName xout
TimeSaveName tout
OutputSaveName yout
SignalLoggingName sigsOut
DSMLoggingName dsmout
OutputOption RefineOutputTimes
OutputTimes []
ReturnWorkspaceOutputsName out
Refine 1
LoggingIntervals [-inf, inf]
Table 5.4. SDD_truth_table_model Configuration Set.Components [25](3)
Property Value
Name Optimization
Description
Components
BlockReduction on
BooleanDataType on
ConditionallyExecuteInputs on
DefaultParameterBehavior Tunable
InlineParams off
UseDivisionForNetSlopeComputation off
UseFloatMulNetSlope off
DefaultUnderspecifiedDataType double
UseSpecifiedMinMax off
InlineInvariantSignals off
OptimizeBlockIOStorage on
BufferReuse on
GlobalBufferReuse on
GlobalVariableUsage None
StrengthReduction off
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
34/45
System Model Configuration
28
AdvancedOptControl
EnforceIntegerDowncast on
ExpressionFolding on
BooleansAsBitfields off
BitfieldContainerType uint_T
EnableMemcpy on
MemcpyThreshold 64
PassReuseOutputArgsAs Structure reference
PassReuseOutputArgsThreshold 12
FoldNonRolledExpr on
LocalBlockOutputs on
RollThreshold 5
StateBitsets off
DataBitsets off
ActiveStateOutputEnumStorageType Native Integer
UseTempVars off
ZeroExternalMemoryAtStartup on
ZeroInternalMemoryAtStartup on
InitFltsAndDblsToZero off
NoFixptDivByZeroProtection off
EfficientFloat2IntCast off
EfficientMapNaN2IntZero on
OptimizeModelRefInitCode off
LifeSpan inf
EvaledLifeSpan Inf
MaxStackSize Inherit from target
BufferReusableBoundary on
SimCompilerOptimization off
AccelVerboseBuild off
Table 5.5. SDD_truth_table_model Configuration Set.Components [25](4)
Property Value
Name Diagnostics
Description
Components
RTPrefix error
ConsistencyChecking none
ArrayBoundsChecking none
SignalInfNanChecking none
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
35/45
System Model Configuration
29
SignalRangeChecking none
ReadBeforeWriteMsg UseLocalSettings
WriteAfterWriteMsg UseLocalSettings
WriteAfterReadMsg UseLocalSettings
AlgebraicLoopMsg warning
ArtificialAlgebraicLoopMsg warning
SaveWithDisabledLinksMsg warning
SaveWithParameterizedLinksMsg none
CheckSSInitialOutputMsg on
UnderspecifiedInitializationDetection Classic
MergeDetectMultiDrivingBlocksExec none
CheckExecutionContextPreStartOutputMsg off
CheckExecutionContextRuntimeOutputMsg off
SignalResolutionControl TryResolveAllWithWarning
BlockPriorityViolationMsg warning
MinStepSizeMsg warning
TimeAdjustmentMsg none
MaxConsecutiveZCsMsg error
MaskedZcDiagnostic warning
IgnoredZcDiagnostic warning
SolverPrmCheckMsg none
InheritedTsInSrcMsg warning
MultiTaskDSMMsg warning
MultiTaskCondExecSysMsg none
MultiTaskRateTransMsg error
SingleTaskRateTransMsg none
TasksWithSamePriorityMsg warning
SigSpecEnsureSampleTimeMsg warning
CheckMatrixSingularityMsg none
IntegerOverflowMsg warning
Int32ToFloatConvMsg warning
ParameterDowncastMsg error
ParameterOverflowMsg errorParameterUnderflowMsg none
ParameterPrecisionLossMsg warning
ParameterTunabilityLossMsg warning
FixptConstUnderflowMsg none
FixptConstOverflowMsg none
FixptConstPrecisionLossMsg none
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
36/45
System Model Configuration
30
UnderSpecifiedDataTypeMsg none
UnnecessaryDatatypeConvMsg none
VectorMatrixConversionMsg none
InvalidFcnCallConnMsg error
FcnCallInpInsideContextMsg UseLocalSettings
SignalLabelMismatchMsg none
UnconnectedInputMsg warning
UnconnectedOutputMsg warning
UnconnectedLineMsg warning
SFcnCompatibilityMsg none
FrameProcessingCompatibilityMsg error
UniqueDataStoreMsg none
BusObjectLabelMismatch warning
RootOutportRequireBusObject warning
AssertControl UseLocalSettings
Echo
EnableOverflowDetection off
AllowSymbolicDim off
ModelReferenceIOMsg none
ModelReferenceVersionMismatchMessage none
ModelReferenceIOMismatchMessage none
ModelReferenceCSMismatchMessage none
ModelReferenceSimTargetVerbose off
UnknownTsInhSupMsg warning
ModelReferenceDataLoggingMessage warning
ModelReferenceSymbolNameMessage warning
ModelReferenceExtraNoncontSigs error
StateNameClashWarn warning
SimStateInterfaceChecksumMismatchMsg warning
SimStateOlderReleaseMsg error
InitInArrayFormatMsg warning
StrictBusMsg ErrorLevel1
BusNameAdapt WarnAndRepairNonBusSignalsTreatedAsBus none
SFUnusedDataAndEventsDiag warning
SFUnexpectedBacktrackingDiag warning
SFInvalidInputDataAccessInChartInitDiag warning
SFNoUnconditionalDefaultTransitionDiag warning
SFTransitionOutsideNaturalParentDiag warning
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
37/45
System Model Configuration
31
SFUnconditionalTransitionShadowingDiag warning
SFUndirectedBroadcastEventsDiag warning
SFTransitionActionBeforeConditionDiag warning
SFOutputUsedAsStateInMooreChartDiag error
IntegerSaturationMsg warning
Table 5.6. SDD_truth_table_model Configuration Set.Components [25](5)
Property Value
Name Hardware Implementation
Description
Components
ProdBitPerChar 8
ProdBitPerShort 16
ProdBitPerInt 32
ProdBitPerLong 32
ProdBitPerLongLong 64
ProdBitPerFloat 32
ProdBitPerDouble 64
ProdBitPerPointer 32
ProdLargestAtomicInteger Char
ProdLargestAtomicFloat None
ProdIntDivRoundTo Undefined
ProdEndianess Unspecified
ProdWordSize 32
ProdShiftRightIntArith on
ProdLongLongMode off
ProdHWDeviceType 32-bit Generic
TargetBitPerChar 8
TargetBitPerShort 16
TargetBitPerInt 32
TargetBitPerLong 32
TargetBitPerLongLong 64
TargetBitPerFloat 32
TargetBitPerDouble 64
TargetBitPerPointer 32
TargetLargestAtomicInteger Char
TargetLargestAtomicFloat None
TargetShiftRightIntArith on
TargetLongLongMode off
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
38/45
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
39/45
System Model Configuration
33
SimReservedNameArray
SimUserSources
SimUserIncludeDirs
SimUserLibraries
SFSimEnableDebug off
SFSimOverflowDetection on
SFSimEcho on
SimBlas on
SimCtrlC on
SimExtrinsic on
SimIntegrity on
SimUseLocalCustomCode off
SimParseCustomCode on
SimBuildMode sf_incremental_build
SimDataInitializer
SimGenImportedTypeDefs off
Table 5.9. SDD_truth_table_model Configuration Set.Components [25](8)
Property Value
Name Code Generation
SystemTargetFile grt.tlc
TLCOptions
CodeGenDirectory
GenCodeOnly off
MakeCommand make_rtw
GenerateMakefile on
PackageGeneratedCodeAndArtifacts off
PackageName
TemplateMakefile grt_default_tmf
PostCodeGenCommand
Description
GenerateReport off
SaveLog off
RTWVerbose on
RetainRTWFile off
ProfileTLC off
TLCDebug off
TLCCoverage off
TLCAssert off
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
40/45
System Model Configuration
34
ProcessScriptMode Default
ConfigurationMode Optimized
ProcessScript
ConfigurationScript
ConfigAtBuild off
RTWUseLocalCustomCode off
RTWUseSimCustomCode off
CustomSourceCode
CustomHeaderCode
CustomInclude
CustomSource
CustomLibrary
CustomInitializer
CustomTerminator
Toolchain Automatically locate an installed toolchain
BuildConfiguration Faster Builds
CustomToolchainOptions
IncludeHyperlinkInReport off
LaunchReport off
PortableWordSizes off
GenerateErtSFunction off
CreateSILPILBlock None
CodeExecutionProfiling off
CodeExecutionProfileVariable executionProfile
CodeProfilingSaveOptions SummaryOnly
CodeProfilingInstrumentation off
SILDebugging off
TargetLang C
IncludeERTFirstTime on
GenerateTraceInfo off
GenerateTraceReport off
GenerateTraceReportSl off
GenerateTraceReportSf offGenerateTraceReportEml off
GenerateCodeInfo off
GenerateWebview off
GenerateCodeMetricsReport off
GenerateCodeReplacementReport off
RTWCompilerOptimization off
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
41/45
System Model Configuration
35
ObjectivePriorities
RTWCustomCompilerOptimizations
CheckMdlBeforeBuild Off
CustomRebuildMode OnUpdate
DataInitializer
Components [SDD_truth_table_model Configuration Set.Comp-
onents(8).Components(1) [36], SDD_truth_ta-
ble_model Configuration Set.Components(8).Com-
ponents(2) [37]]
Table 5.10. SDD_truth_table_model Configuration Set.Components [25](9)
Property Value
Description Simulink Coverage Configuration Component
Components
Name Simulink Coverage
RecordCoverage on
CovPath /
CovSaveName covdata
CovCompData
CovMetricSettings dcmw
CovFilter
CovHTMLOptions
CovNameIncrementing off
CovHtmlReporting on
CovForceBlockReductionOff on
CovEnableCumulative on
CovSaveCumulativeToWorkspaceVar on
CovSaveSingleToWorkspaceVar on
CovCumulativeVarName covCumulativeData
CovCumulativeReport off
CovReportOnPause on
CovModelRefEnable off
CovModelRefExcluded
CovExternalEMLEnable off
CovSFcnEnable on
CovBoundaryAbsTol 1.0000e-05
CovBoundaryRelTol 0.0100
CovUseTimeInterval off
CovStartTime 0
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
42/45
System Model Configuration
36
CovStopTime 0
Table 5.11. SDD_truth_table_model Configuration
Set.Components(8).Components [35](1)
Property ValueName Code Appearance
Description
Components
ForceParamTrailComments off
GenerateComments on
CommentStyle Auto
IgnoreCustomStorageClasses on
IgnoreTestpoints off
IncHierarchyInIds off
MaxIdLength 31
PreserveName off
PreserveNameWithParent off
ShowEliminatedStatement off
OperatorAnnotations off
IncAutoGenComments off
SimulinkDataObjDesc off
SFDataObjDesc off
MATLABFcnDesc off
IncDataTypeInIds off
PrefixModelToSubsysFcnNames on
MangleLength 1
CustomSymbolStr $R$N$M
CustomSymbolStrGlobalVar $R$N$M
CustomSymbolStrType $N$R$M_T
CustomSymbolStrField $N$M
CustomSymbolStrFcn $R$N$M$F
CustomSymbolStrFcnArg rt$I$N$M
CustomSymbolStrBlkIO rtb_$N$M
CustomSymbolStrTmpVar $N$M
CustomSymbolStrMacro $R$N$M
CustomSymbolStrUtil $N$C
CustomCommentsFcn
DefineNamingRule None
DefineNamingFcn
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
43/45
System Model Configuration
37
ParamNamingRule None
ParamNamingFcn
SignalNamingRule None
SignalNamingFcn
InsertBlockDesc off
InsertPolySpaceComments off
SimulinkBlockComments on
MATLABSourceComments off
EnableCustomComments off
InternalIdentifier Shortened
InlinedPrmAccess Literals
ReqsInCode off
UseSimReservedNames off
ReservedNameArray
Table 5.12. SDD_truth_table_model Configuration
Set.Components(8).Components [35](2)
Property Value
Name Target
Description
Components
IsERTTarget off
TargetFcnLib ansi_tfl_table_tmw.mat
TargetLibSuffix
TargetPreCompLibLocation
GenFloatMathFcnCalls NOT IN USE
TargetLangStandard C89/C90 (ANSI)
TargetFunctionLibrary NOT IN USE
CodeReplacementLibrary None
UtilityFuncGeneration Auto
ERTMultiwordTypeDef System defined
ERTMultiwordLength 256
MultiwordLength 2048
GenerateFullHeader on
InferredTypesCompatibility off
GenerateSampleERTMain off
GenerateTestInterfaces off
ModelReferenceCompliant on
ParMdlRefBuildCompliant on
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
44/45
System Model Configuration
38
CompOptLevelCompliant on
ConcurrentExecutionCompliant on
IncludeMdlTerminateFcn on
CombineOutputUpdateFcns off
CombineSignalStateStructs off
SuppressErrorStatus off
ERTFirstTimeCompliant off
IncludeFileDelimiter Auto
ERTCustomFileBanners off
SupportAbsoluteTime on
LogVarNameModifier rt_
MatFileLogging on
MultiInstanceERTCode off
CodeInterfacePackaging Nonreusable function
SupportNonFinite on
SupportComplex on
PurelyIntegerCode off
SupportContinuousTime on
SupportNonInlinedSFcns on
SupportVariableSizeSignals off
ParenthesesLevel Nominal
CastingMode Nominal
GenerateClassInterface off
ModelStepFunctionPrototypeControlCompliant off
CPPClassGenCompliant on
GRTInterface on
GenerateAllocFcn off
UseToolchainInfoCompliant on
GenerateSharedConstants on
ExtMode off
ExtModeStaticAlloc off
ExtModeTesting off
ExtModeStaticAllocSize 1000000ExtModeTransport 0
ExtModeMexFile ext_comm
ExtModeMexArgs
ExtModeIntrfLevel Level1
RTWCAPISignals off
RTWCAPIParams off
-
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model
45/45
System Model Configuration
RTWCAPIStates off
RTWCAPIRootIO off
GenerateASAP2 off
MultiInstanceErrorCode Error
top related