rabotti s.r.l. september 2019 piezo bosch injectors board.pdfpiezo bosch injectors picture 5 picture...
Post on 11-Mar-2020
19 Views
Preview:
TRANSCRIPT
RABOTTI S.r.l.
Good morning to all of our Customers and Partners,
In this number we will introduce what Rabotti S.r.l. is able to offer concerning test and encoding of piezoelectric Bosch
injectors ( CRI 3)
In order to test this kind of injectors is necessary to have Piezo Board’s kit that has within it :
1) ELNBRD00118-2 (picture 1): new electronic board to
be integrated on the equipments that are already equi-
pped with MBB board.
2) OLERAC00462 (picture 2): plastic connector for Bosch injectors’ backflow
115/116/117
3) OLETBO00136 (picture 3) Contropressure valve group
to install on the backflow to allow the correct function
of the injector.
September 2019 7°release
PIEZO BOSCH INJECTORS
Picture 3
Picture 1
Picture 2
RABOTTI S.r.l.
4) OLETBO00186 (picture 4): high pressure pipe
Lenght 400mm with fittings M14-M14
5) ELECAV121175000 and ELECAV12172000 (picture 5): cables with Mercedes and Bosch plugs (according to the type of
the injector ).
September 2019 7° release
PIEZO BOSCH INJECTORS
Picture 5
Picture 4
RABOTTI S.r.l.
September 2019 7° release
PIEZO BOSCH INJECTORS Picture 6
Picture 6 shows how Bosch
Piezo Injectors is to be instal-
led on Rabotti equipments,
while picture 7 shows an
example of an injector’s final
report CRI3-16.
First of all the report shows a result of ISA test and after the scope measures ma-
de in the test VL, EM, LL e VE as well as the size of the backflow for a complete
and exhaustive analysis of the injector during the test.
Picture 7
top related