raugrid - allan block › literature › pdf › raugrid.pdfweight (average) oz/sq yard astm d-5261...
Post on 01-Feb-2021
2 Views
Preview:
TRANSCRIPT
-
RG_Eng_All_09-20-99
RAUGRID™ 2/3 - 30 GEOGRIDLückenhaus Raugrid™ geogrids, for soil and aggregate reinforcement, are manufactured of hightenacity, high molecular weight, polyester yarns, woven into a stable interlocking grid and then PVCcoated to provide damage protection during installation. Raugrid™ geogrids, developed for thereinforcement of steepened slopes and segmental retaining walls, and for road base stabilization, are:• biologically inert, resistant to most naturally encountered chemicals, alkalies, and acids• resistant to ultra violet exposure and installation damage• resistant to long-term creep• flexible for easy installation
Physical Properties of Raugrid™ 2/3 - 30 Geogrid PROPERTY UNIT TEST METHOD VALUE¹
WEIGHT (Average) oz/sq yard ASTM D-5261 6.8
APERTURE SIZE (Average) MD TD Inch Measured w/calipers 1.0 1.2
PERCENT OPEN AREA (Average) % COE method 75+
WIDE WIDTH TENSILE STRENGTH @ ULTIMATE MD
TD 1418 1884
@ 5 % Strain
MD TD
lb/ft ASTM D-4595 417 513
ELONGATION AT BREAK MD TD % ASTM D-4595 9.0 12.0
Long Term Design Strength (LTDS) RFCR=1.52,RFID=1.1,RFD=1.15 TD lb/ft
AASHTO 1996
979
Roll Dimensions (Width x Length) Roll Area Roll Weight (Average)
Ft
Square yards Pounds
16.4 x 328 598 299
1 All values stated here are Minimum Average Roll Values (unless otherwise stated) and are based on a 95% confidencelevel. (MD Machine Direction; TD-Transverse Direction , also called Cross Direction) RAUGRID™ is manufactured from polyester with a molecular weight (Mn ) > 25,000 grams/mole and Carboxyl EndGroups (CEG's) < 30 mmol/kg.
LTDS (TD) = TULTIMATE (TD) = 1884 = 979 lb/ft RFCR • RFID • RFD 1.52 x 1.1 x 1.15
LÜCKENHAUS NORTH AMERICA, INC. 841 East Main Street, Spartanburg, SC 29302 • Tel: 800/794-0910, 864/583-8663 • Fax: 864/583-8664
E-Mail: luckenhaus@bellsouth.net
RAUGRID™ Geogrids are distributed by CARTHAGE MILLS 4243 Hunt Road, Cincinnati, OH 45242 • Tel: 800-543-4430, 513/794-1600 • Fax: 513/794-3434
Partial reduction factors: RFCR= for creep deformation RFID = for installation damage RFD = for biological and chemical degradation
-
RG_Eng_All_09-20-99
RAUGRID™ 3/3 - 20 GEOGRIDLückenhaus Raugrid™ geogrids, for soil and aggregate reinforcement, are manufactured of hightenacity, high molecular weight, polyester yarns, woven into a stable interlocking grid and then PVCcoated to provide damage protection during installation. Raugrid™ geogrids, developed for thereinforcement of steepened slopes and segmental retaining walls, and for road base stabilization, are:• biologically inert, resistant to most naturally encountered chemicals, alkalies, and acids• resistant to ultra violet exposure and installation damage• resistant to long-term creep• flexible for easy installation
Physical Properties of Raugrid™ 3/3 - 20 Geogrid PROPERTY UNIT TEST METHOD VALUE¹
WEIGHT (Average) oz/sq yards ASTM D-5261 7.4
APERTURE SIZE (Average) MD TD Inch Measured w/calipers 0.8 0.8
PERCENT OPEN AREA (Average) % COE method 75+
WIDE WIDTH TENSILE STRENGTH @ ULTIMATE MD
TD 2254 2219
@ 5 % Strain
MD TD
lb/ft ASTM D-4595 918 596
ELONGATION AT BREAK MD TD % ASTM D-4595 10.4 13.2
Long Term Design Strength (LTDS) RFCR=1.52,RFID=1.1,RFD=1.15 MD lb/ft
AASHTO 1996
1172
Roll Dimensions (Width x Length) Roll Area Roll Weight (Average)
Ft
Square yards Pounds
16.4 x 328 598 323
1 All values stated here are Minimum Average Roll Values (unless otherwise stated) and are based on a 95% confidencelevel. (MD Machine Direction; TD-Transverse Direction , also called Cross Direction) RAUGRID™ is manufactured from polyester with a molecular weight (Mn ) > 25,000 grams/mole and Carboxyl EndGroups (CEG's) < 30 mmol/kg.
LTDS (MD) = TULTIMATE (MD) = 2254 = 1172 lb/ft RFCR • RFID • RFD 1.52 x 1.1 x 1.15
LÜCKENHAUS NORTH AMERICA, INC. 841 East Main Street, Spartanburg, SC 29302 • Tel: 800/794-0910, 864/583-8663 • Fax: 864/583-8664
E-Mail: luckenhaus@bellsouth.net
RAUGRID™ Geogrids are distributed by CARTHAGE MILLS 4243 Hunt Road, Cincinnati, OH 45242 • Tel: 800-543-4430, 513/794-1600 • Fax: 513/794-3434
Partial reduction factors: RFCR= for creep deformation RFID = for installation damage RFD = for biological and chemical degradation
-
RG_Eng_All_09-20-99
RAUGRID™ 4/2 - 15 GEOGRIDLückenhaus Raugrid™ geogrids, for soil and aggregate reinforcement, are manufactured of hightenacity, high molecular weight, polyester yarns, woven into a stable interlocking grid and then PVCcoated to provide damage protection during installation. Raugrid™ geogrids, developed for thereinforcement of steepened slopes and segmental retaining walls, and for road base stabilization, are:• biologically inert, resistant to most naturally encountered chemicals, alkalies, and acids• resistant to ultra violet exposure and installation damage• resistant to long-term creep• flexible for easy installation
Physical Properties of Raugrid™ 4/2-15 Geogrid PROPERTY UNIT TEST METHOD VALUE¹
WEIGHT (Average) oz/sq yards ASTM D-5261 7.7
APERTURE SIZE (Average) MD TD Inch Measured w/calipers 0.6 0.6
PERCENT OPEN AREA (Average) % COE method 75+
WIDE WIDTH TENSILE STRENGTH @ ULTIMATE MD
TD 2918 1479
@ 5 % Strain
MD TD
lb/ft ASTM D-4595 781 376
ELONGATION AT BREAK MD TD % ASTM D-4595 10.6 11.9
Long Term Design Strength (LTDS) RFCR=1.52,RFID=1.1,RFD=1.15 MD lb/ft
AASHTO 1996
1517
Roll Dimensions (Width x Length) Roll Area Roll Weight (Average)
Ft
Square yards Pounds
16.4 x 328 598 334
1 All values stated here are Minimum Average Roll Values (unless otherwise stated) and are based on a 95% confidencelevel. (MD Machine Direction; TD-Transverse Direction , also called Cross Direction) RAUGRID™ is manufactured from polyester with a molecular weight (Mn ) > 25,000 grams/mole and Carboxyl EndGroups (CEG's) < 30 mmol/kg.
LTDS (MD) = TULTIMATE (MD) = 2918 = 1517 lb/ft RFCR • RFID • RFD 1.52 x 1.1 x 1.15
LÜCKENHAUS NORTH AMERICA, INC. 841 East Main Street, Spartanburg, SC 29302 • Tel: 800/794-0910, 864/583-8663 • Fax: 864/583-8664
E-Mail: luckenhaus@bellsouth.net
RAUGRID™ Geogrids are distributed by CARTHAGE MILLS 4243 Hunt Road, Cincinnati, OH 45242 • Tel: 800-543-4430, 513/794-1600 • Fax: 513/794-3434
Partial reduction factors: RFCR= for creep deformation RFID = for installation damage RFD = for biological and chemical degradation
-
RG_Eng_All_09-20-99
RAUGRID™ 6/3 - 15 GEOGRIDLückenhaus Raugrid™ geogrids, for soil and aggregate reinforcement, are manufactured of hightenacity, high molecular weight, polyester yarns, woven into a stable interlocking grid and then PVCcoated to provide damage protection during installation. Raugrid™ geogrids, developed for thereinforcement of steepened slopes and segmental retaining walls, and for road base stabilization, are:• biologically inert, resistant to most naturally encountered chemicals, alkalies, and acids• resistant to ultra violet exposure and installation damage• resistant to long-term creep• flexible for easy installation
Physical Properties of Raugrid™ 6/3-15 Geogrid PROPERTY UNIT TEST METHOD VALUE¹
WEIGHT (Average) oz/sq yards ASTM D-5261 10.4
APERTURE SIZE (Average) MD TD Inch Measured w/calipers 0.6 0.6
PERCENT OPEN AREA (Average) % COE method 68+
WIDE WIDTH TENSILE STRENGTH @ ULTIMATE MD
TD 3994 1959
@ 5 % Strain
MD TD
lb/ft ASTM D-4595 1144 452
ELONGATION AT BREAK MD TD % ASTM D-4595 13.1 12.1
Long Term Design Strength (LTDS) RFCR=1.52,RFID=1.1,RFD=1.15 MD lb/ft
AASHTO 1996
2077
Roll Dimensions (Width x Length) Roll Area Roll Weight (Average)
Ft
Square yards Pounds
16.4 x 164 298 238
1 All values stated here are Minimum Average Roll Values (unless otherwise stated) and are based on a 95% confidencelevel. (MD Machine Direction; TD-Transverse Direction , also called Cross Direction) RAUGRID™ is manufactured from polyester with a molecular weight (Mn ) > 25,000 grams/mole and Carboxyl EndGroups (CEG's) < 30 mmol/kg.
LTDS (MD) = TULTIMATE (MD) = 3994 = 2077 lb/ft RFCR • RFID • RFD 1.52 x 1.1 x 1.15
LÜCKENHAUS NORTH AMERICA, INC. 841 East Main Street, Spartanburg, SC 29302 • Tel: 800/794-0910, 864/583-8663 • Fax: 864/583-8664
E-Mail: luckenhaus@bellsouth.net
RAUGRID™ Geogrids are distributed by CARTHAGE MILLS 4243 Hunt Road, Cincinnati, OH 45242 • Tel: 800-543-4430, 513/794-1600 • Fax: 513/794-3434
Partial reduction factors: RFCR= for creep deformation RFID = for installation damage RFD = for biological and chemical degradation
-
RG_Eng_All_09-20-99
RAUGRID™ 8/3 - 20 GEOGRIDLückenhaus Raugrid™ geogrids, for soil and aggregate reinforcement, are manufactured of hightenacity, high molecular weight, polyester yarns, woven into a stable interlocking grid and then PVCcoated to provide damage protection during installation. Raugrid™ geogrids, developed for thereinforcement of steepened slopes and segmental retaining walls, and for road base stabilization, are:• biologically inert, resistant to most naturally encountered chemicals, alkalies, and acids• resistant to ultra violet exposure and installation damage• resistant to long-term creep• flexible for easy installation
Physical Properties of Raugrid™ 8/3 - 20 Geogrid PROPERTY UNIT TEST METHOD VALUE¹
WEIGHT (Average) Oz/sq yard ASTM D-5261 12.1
APERTURE SIZE (Average) MD TD Inch Measured w/calipers 0.8 0.8
PERCENT OPEN AREA (Average) % COE method 75+
WIDE WIDTH TENSILE STRENGTH @ ULTIMATE MD
TD 5378 2021
@ 5 % Strain
MD TD
lb/ft ASTM D-4595 1096 465
ELONGATION AT BREAK MD TD % ASTM D-4595 11.1 10.5
Long Term Design Strength (LTDS) RFCR=1.52,RFID=1.1,RFD=1.15 MD lb/ft
AASHTO 1996
2796
Roll Dimensions (Width x Length) Roll Area Roll Weight (Average)
Ft
Square yards Pounds
16.4 x 164 298 271
1 All values stated here are Minimum Average Roll Values (unless otherwise stated) and are based on a 95% confidencelevel. (MD Machine Direction; TD-Transverse Direction , also called Cross Direction) RAUGRID™ is manufactured from polyester with a molecular weight (Mn ) > 25,000 grams/mole and Carboxyl EndGroups (CEG's) < 30 mmol/kg.
LTDS (MD) = TULTIMATE (MD) = 5378 = 2796 lb/ft RFCR • RFID • RFD 1.52 x 1.1 x 1.15
LÜCKENHAUS NORTH AMERICA, INC. 841 East Main Street, Spartanburg, SC 29302 • Tel: 800/794-0910, 864/583-8663 • Fax: 864/583-8664
E-Mail: luckenhaus@bellsouth.net
RAUGRID™ Geogrids are distributed by CARTHAGE MILLS 4243 Hunt Road, Cincinnati, OH 45242 • Tel: 800-543-4430, 513/794-1600 • Fax: 513/794-3434
Partial reduction factors: RFCR= for creep deformation RFID = for installation damage RFD = for biological and chemical degradation
-
RG_Eng_All_09-20-99
RAUGRID™ 10/3 - 20 GEOGRIDLückenhaus Raugrid™ geogrids, for soil and aggregate reinforcement, are manufactured of hightenacity, high molecular weight, polyester yarns, woven into a stable interlocking grid and then PVCcoated to provide damage protection during installation. Raugrid™ geogrids, developed for thereinforcement of steepened slopes and segmental retaining walls, and for road base stabilization, are:• biologically inert, resistant to most naturally encountered chemicals, alkalies, and acids• resistant to ultra violet exposure and installation damage• resistant to long-term creep• flexible for easy installation
Physical Properties of Raugrid™ 10/3 - 20 Geogrid PROPERTY UNIT TEST METHOD VALUE¹
WEIGHT (Average) Oz/sq yard ASTM D-5261 15.6
APERTURE SIZE (Average) MD TD Inch Measured w/calipers 0.8 0.8
PERCENT OPEN AREA (Average) % COE method 60+
WIDE WIDTH TENSILE STRENGTH @ ULTIMATE MD
TD 6645 2014
@ 5 % Strain
MD TD
lb/ft ASTM D-4595 1637 411
ELONGATION AT BREAK MD TD % ASTM D-4595 12.8 9.8
Long Term Design Strength (LTDS) RFCR=1.52,RFID=1.1,RFD=1.15 MD lb/ft
AASHTO 1996
3455
Roll Dimensions (Width x Length) Roll Area Roll Weight (Average)
Ft
Square yards Pounds
16.4 x 164 298 337
1 All values stated here are Minimum Average Roll Values (unless otherwise stated) and are based on a 95% confidencelevel. (MD Machine Direction; TD-Transverse Direction , also called Cross Direction) RAUGRID™ is manufactured from polyester with a molecular weight (Mn ) > 25,000 grams/mole and Carboxyl EndGroups (CEG's) < 30 mmol/kg.
LTDS (MD) = TULTIMATE (MD) = 6645 = 3455 lb/ft RFCR • RFID • RFD 1.52 x 1.1 x 1.15
LÜCKENHAUS NORTH AMERICA, INC. 841 East Main Street, Spartanburg, SC 29302 • Tel: 800/794-0910, 864/583-8663 • Fax: 864/583-8664
E-Mail: luckenhaus@bellsouth.net
RAUGRID™ Geogrids are distributed by CARTHAGE MILLS 4243 Hunt Road, Cincinnati, OH 45242 • Tel: 800-543-4430, 513/794-1600 • Fax: 513/794-3434
Partial reduction factors: RFCR= for creep deformation RFID = for installation damage RFD = for biological and chemical degradation
-
RG_Eng_All_09-20-99
RAUGRID™ 13/3 - 20 GEOGRIDLückenhaus Raugrid™ geogrids, for soil and aggregate reinforcement, are manufactured of hightenacity, high molecular weight, polyester yarns, woven into a stable interlocking grid and then PVCcoated to provide damage protection during installation. Raugrid™ geogrids, developed for thereinforcement of steepened slopes and segmental retaining walls, and for road base stabilization, are:• biologically inert, resistant to most naturally encountered chemicals, alkalies, and acids• resistant to ultra violet exposure and installation damage• resistant to long-term creep• flexible for easy installation
Physical Properties of Raugrid™ 13/3 - 20 Geogrid PROPERTY UNIT TEST METHOD VALUE¹
WEIGHT (Average) oz/sq yard ASTM D-5261 17.4
APERTURE SIZE (Average) MD TD Inch Measured w/calipers 0.8 0.8
PERCENT OPEN AREA (Average) % COE method 60+
WIDE WIDTH TENSILE STRENGTH @ ULTIMATE MD
TD 8550 2089
@ 5 % Strain
MD TD
lb/ft ASTM D-4595 2548 568
ELONGATION AT BREAK MD TD % ASTM D-4595 13.9 13.0
Long Term Design Strength (LTDS) RFCR=1.52,RFID=1.1,RFD=1.15 MD lb/ft
AASHTO 1996
4446
Roll Dimensions (Width x Length) Roll Area Roll Weight (Average)
Ft
Square yards Pounds
16.4 x 164 298 370
1 All values stated here are Minimum Average Roll Values (unless otherwise stated) and are based on a 95% confidencelevel. (MD Machine Direction; TD-Transverse Direction , also called Cross Direction) RAUGRID™ is manufactured from polyester with a molecular weight (Mn ) > 25,000 grams/mole and Carboxyl EndGroups (CEG's) < 30 mmol/kg.
LTDS (MD) = TULTIMATE (MD) = 8550 = 4446 lb/ft RFCR • RFID • RFD 1.52 x 1.1 x 1.15
LÜCKENHAUS NORTH AMERICA, INC. 841 East Main Street, Spartanburg, SC 29302 • Tel: 800/794-0910, 864/583-8663 • Fax: 864/583-8664
E-Mail: luckenhaus@bellsouth.net
RAUGRID™ Geogrids are distributed by CARTHAGE MILLS 4243 Hunt Road, Cincinnati, OH 45242 • Tel: 800-543-4430, 513/794-1600 • Fax: 513/794-3434
Partial reduction factors: RFCR= for creep deformation RFID = for installation damage RFD = for biological and chemical degradation
-
RG_Eng_All_09-20-99
RAUGRID™ 15/3- 20 GEOGRIDLückenhaus Raugrid™ geogrids, for soil and aggregate reinforcement, are manufactured of hightenacity, high molecular weight, polyester yarns, woven into a stable interlocking grid and then PVCcoated to provide damage protection during installation. Raugrid™ geogrids, developed for thereinforcement of steepened slopes and segmental retaining walls, and for road base stabilization, are:• biologically inert, resistant to most naturally encountered chemicals, alkalies, and acids• resistant to ultra violet exposure and installation damage• resistant to long-term creep• flexible for easy installation
Physical Properties of Raugrid™ 15/3-20 Geogrid PROPERTY UNIT TEST METHOD VALUE¹
WEIGHT (Average) oz/sq yard ASTM D-5261 18.9
APERTURE SIZE (Average) MD TD Inch Measured w/calipers 0.8 0.8
PERCENT OPEN AREA (Average) % COE method 60+
WIDE WIDTH TENSILE STRENGTH @ ULTIMATE MD
TD 10139 2370
@ 5 % Strain
MD TD
lb/ft ASTM D-4595 2315 513
ELONGATION AT BREAK MD TD % ASTM D-4595 11.8 12.8
Long Term Design Strength (LTDS) RFCR=1.52,RFID=1.1,RFD=1.15 MD lb/ft
AASHTO 1996
5273
Roll Dimensions (Width x Length) Roll Area Roll Weight (Average)
Ft
Square yards Pounds
16.4 x 164 298 394
1 All values stated here are Minimum Average Roll Values (unless otherwise stated) and are based on a 95% confidencelevel. (MD Machine Direction; TD-Transverse Direction , also called Cross Direction) RAUGRID™ is manufactured from polyester with a molecular weight (Mn ) > 25,000 grams/mole and Carboxyl EndGroups (CEG's) < 30 mmol/kg.
LTDS (MD) = TULTIMATE (MD) = 10139 = 5273 lb/ft RFCR • RFID • RFD 1.52 x 1.1 x 1.15
LÜCKENHAUS NORTH AMERICA, INC. 841 East Main Street, Spartanburg, SC 29302 • Tel: 800/794-0910, 864/583-8663 • Fax: 864/583-8664
E-Mail: luckenhaus@bellsouth.net
RAUGRID™ Geogrids are distributed by CARTHAGE MILLS 4243 Hunt Road, Cincinnati, OH 45242 • Tel: 800-543-4430, 513/794-1600 • Fax: 513/794-3434
Partial reduction factors: RFCR= for creep deformation RFID = for installation damage RFD = for biological and chemical degradation
-
RG_Met_All_9-8-99
RAUGRID™ 2/3 - 30 GEOGRIDLückenhaus Raugrid™ geogrids, for soil and aggregate reinforcement, are manufactured of hightenacity, high molecular weight, polyester yarns, woven into a stable interlocking grid and then PVCcoated to provide damage protection during installation. Raugrid™ geogrids, developed for thereinforcement of steepened slopes and segmental retaining walls, and for road base stabilization, are:• biologically inert, resistant to most naturally encountered chemicals, alkalies, and acids• resistant to ultra violet exposure and installation damage• resistant to long-term creep• flexible for easy installation
Physical Properties of Raugrid™ 2/3 - 30 Geogrid PROPERTY UNIT TEST METHOD VALUE¹
WEIGHT (Average) g/m² ASTM D-5261 231
APERTURE SIZE (Average) MD TD mm Measured w/calipers 25 30
PERCENT OPEN AREA (Average) % COE method 75+
WIDE WIDTH TENSILE STRENGTH @ ULTIMATE MD
TD 20.7 27.5
@ 5 % Strain
MD TD
kN/m ASTM D-4595 6.1 7.5
ELONGATION AT BREAK MD TD % ASTM D-4595 9.0 12.0
Long Term Design Strength (LTDS) RFCR=1.52,RFID=1.1,RFD=1.15 TD kN/m
AASHTO 1996
14.3
Roll Dimensions (Width x Length) Roll Area Roll Weight (Average)
m
m² kg
5 x 100 500 136
1 All values stated here are Minimum Average Roll Values (unless otherwise stated) and are based on a 95% confidencelevel. (MD Machine Direction; TD-Transverse Direction , also called Cross Direction) RAUGRID™ is manufactured from polyester with a molecular weight (Mn ) > 25,000 grams/mole and Carboxyl EndGroups (CEG's) < 30 mmol/kg.
LTDS (TD) = TULTIMATE (TD) = 27.5 = 14.3 kN/m RFCR • RFID • RFD 1.52 x 1.1 x 1.15
LÜCKENHAUS NORTH AMERICA, INC. 841 East Main Street, Spartanburg, SC 29302 • Tel: 800/794-0910, 864/583-8663 • Fax: 864/583-8664
E-Mail: luckenhaus@bellsouth.net
RAUGRID™ Geogrids are distributed by CARTHAGE MILLS 4243 Hunt Road, Cincinnati, OH 45242 • Tel: 800-543-4430, 513/794-1600 • Fax: 513/794-3434
Partial reduction factors: RFCR= for creep deformation RFID = for installation damage RFD = for biological and chemical degradation
-
RG_Met_All_9-8-99
RAUGRID™ 3/3 - 20 GEOGRIDLückenhaus Raugrid™ geogrids, for soil and aggregate reinforcement, are manufactured of hightenacity, high molecular weight, polyester yarns, woven into a stable interlocking grid and then PVCcoated to provide damage protection during installation. Raugrid™ geogrids, developed for thereinforcement of steepened slopes and segmental retaining walls, and for road base stabilization, are:• biologically inert, resistant to most naturally encountered chemicals, alkalies, and acids• resistant to ultra violet exposure and installation damage• resistant to long-term creep• flexible for easy installation
Physical Properties of Raugrid™ 3/3 - 20 Geogrid PROPERTY UNIT TEST METHOD VALUE¹
WEIGHT (Average) g/m² ASTM D-5261 253
APERTURE SIZE (Average) MD TD mm Measured w/calipers 20 20
PERCENT OPEN AREA (Average) % COE method 75+
WIDE WIDTH TENSILE STRENGTH @ ULTIMATE MD
TD 32.9 32.4
@ 5 % Strain
MD TD
kN/m ASTM D-4595 13.4 8.7
ELONGATION AT BREAK MD TD % ASTM D-4595 10.4 13.2
Long Term Design Strength (LTDS) RFCR=1.52,RFID=1.1,RFD=1.15 MD kN/m
AASHTO 1996
17.1
Roll Dimensions (Width x Length) Roll Area Roll Weight (Average)
m
m² kg
5 x 100 500 147
1 All values stated here are Minimum Average Roll Values (unless otherwise stated) and are based on a 95% confidencelevel. (MD Machine Direction; TD-Transverse Direction , also called Cross Direction) RAUGRID™ is manufactured from polyester with a molecular weight (Mn ) > 25,000 grams/mole and Carboxyl EndGroups (CEG's) < 30 mmol/kg.
LTDS (MD) = TULTIMATE (MD) = 32.9 = 17.1 kN/m RFCR • RFID • RFD 1.52 x 1.1 x 1.15
LÜCKENHAUS NORTH AMERICA, INC. 841 East Main Street, Spartanburg, SC 29302 • Tel: 800/794-0910, 864/583-8663 • Fax: 864/583-8664
E-Mail: luckenhaus@bellsouth.net
RAUGRID™ Geogrids are distributed by CARTHAGE MILLS 4243 Hunt Road, Cincinnati, OH 45242 • Tel: 800-543-4430, 513/794-1600 • Fax: 513/794-3434
Partial reduction factors: RFCR= for creep deformation RFID = for installation damage RFD = for biological and chemical degradation
-
RG_Met_All_9-8-99
RAUGRID™ 4/2 - 15 GEOGRIDLückenhaus Raugrid™ geogrids, for soil and aggregate reinforcement, are manufactured of hightenacity, high molecular weight, polyester yarns, woven into a stable interlocking grid and then PVCcoated to provide damage protection during installation. Raugrid™ geogrids, developed for thereinforcement of steepened slopes and segmental retaining walls, and for road base stabilization, are:• biologically inert, resistant to most naturally encountered chemicals, alkalies, and acids• resistant to ultra violet exposure and installation damage• resistant to long-term creep• flexible for easy installation
Physical Properties of Raugrid™ 4/2-15 Geogrid PROPERTY UNIT TEST METHOD VALUE¹
WEIGHT (Average) g/m² ASTM D-5261 263
APERTURE SIZE (Average) MD TD mm Measured w/calipers 15 15
PERCENT OPEN AREA (Average) % COE method 75+
WIDE WIDTH TENSILE STRENGTH @ ULTIMATE MD
TD 42.6 21.6
@ 5 % Strain
MD TD
kN/m ASTM D-4595 11.4 5.5
ELONGATION AT BREAK MD TD % ASTM D-4595 10.6 11.9
Long Term Design Strength (LTDS) RFCR=1.52,RFID=1.1,RFD=1.15 MD kN/m
AASHTO 1996
22.1
Roll Dimensions (Width x Length) Roll Area Roll Weight (Average)
m
m² kg
5 x 100 500 152
1 All values stated here are Minimum Average Roll Values (unless otherwise stated) and are based on a 95% confidencelevel. (MD Machine Direction; TD-Transverse Direction , also called Cross Direction) RAUGRID™ is manufactured from polyester with a molecular weight (Mn ) > 25,000 grams/mole and Carboxyl EndGroups (CEG's) < 30 mmol/kg.
LTDS (MD) = TULTIMATE (MD) = 42.6 = 22.1 kN/m RFCR • RFID • RFD 1.52 x 1.1 x 1.15
LÜCKENHAUS NORTH AMERICA, INC. 841 East Main Street, Spartanburg, SC 29302 • Tel: 800/794-0910, 864/583-8663 • Fax: 864/583-8664
E-Mail: luckenhaus@bellsouth.net
RAUGRID™ Geogrids are distributed by CARTHAGE MILLS 4243 Hunt Road, Cincinnati, OH 45242 • Tel: 800-543-4430, 513/794-1600 • Fax: 513/794-3434
Partial reduction factors: RFCR= for creep deformation RFID = for installation damage RFD = for biological and chemical degradation
-
RG_Met_All_9-8-99
RAUGRID™ 6/3 - 15 GEOGRIDLückenhaus Raugrid™ geogrids, for soil and aggregate reinforcement, are manufactured of hightenacity, high molecular weight, polyester yarns, woven into a stable interlocking grid and then PVCcoated to provide damage protection during installation. Raugrid™ geogrids, developed for thereinforcement of steepened slopes and segmental retaining walls, and for road base stabilization, are:• biologically inert, resistant to most naturally encountered chemicals, alkalies, and acids• resistant to ultra violet exposure and installation damage• resistant to long-term creep• flexible for easy installation
Physical Properties of Raugrid™ 6/3-15 Geogrid PROPERTY UNIT TEST METHOD VALUE¹
WEIGHT (Average) g/m² ASTM D-5261 352
APERTURE SIZE (Average) MD TD mm Measured w/calipers 15 15
PERCENT OPEN AREA (Average) % COE method 68+
WIDE WIDTH TENSILE STRENGTH @ ULTIMATE MD
TD 58.3 28.6
@ 5 % Strain
MD TD
kN/m ASTM D-4595 16.7 6.6
ELONGATION AT BREAK MD TD % ASTM D-4595 13.1 12.1
Long Term Design Strength (LTDS) RFCR=1.52,RFID=1.1,RFD=1.15 MD kN/m
AASHTO 1996
30.3
Roll Dimensions (Width x Length) Roll Area Roll Weight (Average)
m
m² kg
5 x 50 250 108
1 All values stated here are Minimum Average Roll Values (unless otherwise stated) and are based on a 95% confidencelevel. (MD Machine Direction; TD-Transverse Direction , also called Cross Direction) RAUGRID™ is manufactured from polyester with a molecular weight (Mn ) > 25,000 grams/mole and Carboxyl EndGroups (CEG's) < 30 mmol/kg.
LTDS (MD) = TULTIMATE (MD) = 58.3 = 30.3 kN/m RFCR • RFID • RFD 1.52 x 1.1 x 1.15
LÜCKENHAUS NORTH AMERICA, INC. 841 East Main Street, Spartanburg, SC 29302 • Tel: 800/794-0910, 864/583-8663 • Fax: 864/583-8664
E-Mail: luckenhaus@bellsouth.net
RAUGRID™ Geogrids are distributed by CARTHAGE MILLS 4243 Hunt Road, Cincinnati, OH 45242 • Tel: 800-543-4430, 513/794-1600 • Fax: 513/794-3434
Partial reduction factors: RFCR= for creep deformation RFID = for installation damage RFD = for biological and chemical degradation
-
RG_Met_All_9-8-99
RAUGRID™ 8/3 - 20 GEOGRIDLückenhaus Raugrid™ geogrids, for soil and aggregate reinforcement, are manufactured of hightenacity, high molecular weight, polyester yarns, woven into a stable interlocking grid and then PVCcoated to provide damage protection during installation. Raugrid™ geogrids, developed for thereinforcement of steepened slopes and segmental retaining walls, and for road base stabilization, are:• biologically inert, resistant to most naturally encountered chemicals, alkalies, and acids• resistant to ultra violet exposure and installation damage• resistant to long-term creep• flexible for easy installation
Physical Properties of Raugrid™ 8/3 - 20 Geogrid PROPERTY UNIT TEST METHOD VALUE¹
WEIGHT (Average) g/m² ASTM D-5261 412
APERTURE SIZE (Average) MD TD mm Measured w/calipers 20 20
PERCENT OPEN AREA (Average) % COE method 75+
WIDE WIDTH TENSILE STRENGTH @ ULTIMATE MD
TD 78.5 29.5
@ 5 % Strain
MD TD
kN/m ASTM D-4595 16.0 6.8
ELONGATION AT BREAK MD TD % ASTM D-4595 11.1 10.5
Long Term Design Strength (LTDS) RFCR=1.52,RFID=1.1,RFD=1.15 MD kN/m
AASHTO 1996
40.8
Roll Dimensions (Width x Length) Roll Area Roll Weight (Average)
m
m² kg
5 x 50 250 123
1 All values stated here are Minimum Average Roll Values (unless otherwise stated) and are based on a 95% confidencelevel. (MD Machine Direction; TD-Transverse Direction , also called Cross Direction) RAUGRID™ is manufactured from polyester with a molecular weight (Mn ) > 25,000 grams/mole and Carboxyl EndGroups (CEG's) < 30 mmol/kg.
LTDS (MD) = TULTIMATE (MD) = 78.5 = 40.8 kN/m RFCR • RFID • RFD 1.52 x 1.1 x 1.15
LÜCKENHAUS NORTH AMERICA, INC. 841 East Main Street, Spartanburg, SC 29302 • Tel: 800/794-0910, 864/583-8663 • Fax: 864/583-8664
E-Mail: luckenhaus@bellsouth.net
RAUGRID™ Geogrids are distributed by CARTHAGE MILLS 4243 Hunt Road, Cincinnati, OH 45242 • Tel: 800-543-4430, 513/794-1600 • Fax: 513/794-3434
Partial reduction factors: RFCR= for creep deformation RFID = for installation damage RFD = for biological and chemical degradation
-
RG_Met_All_9-8-99
RAUGRID™ 10/3 - 20 GEOGRIDLückenhaus Raugrid™ geogrids, for soil and aggregate reinforcement, are manufactured of hightenacity, high molecular weight, polyester yarns, woven into a stable interlocking grid and then PVCcoated to provide damage protection during installation. Raugrid™ geogrids, developed for thereinforcement of steepened slopes and segmental retaining walls, and for road base stabilization, are:• biologically inert, resistant to most naturally encountered chemicals, alkalies, and acids• resistant to ultra violet exposure and installation damage• resistant to long-term creep• flexible for easy installation
Physical Properties of Raugrid™ 10/3 - 20 Geogrid PROPERTY UNIT TEST METHOD VALUE¹
WEIGHT (Average) g/m² ASTM D-5261 530
APERTURE SIZE (Average) MD TD mm Measured w/calipers 20 20
PERCENT OPEN AREA (Average) % COE method 60+
WIDE WIDTH TENSILE STRENGTH @ ULTIMATE MD
TD 97.0 29.4
@ 5 % Strain
MD TD
kN/m ASTM D-4595 23.9 6.0
ELONGATION AT BREAK MD TD % ASTM D-4595 12.8 9.8
Long Term Design Strength (LTDS) RFCR=1.52,RFID=1.1,RFD=1.15 MD kN/m
AASHTO 1996
50.4
Roll Dimensions (Width x Length) Roll Area Roll Weight (Average)
m
m² kg
5 x 50 250 153
1 All values stated here are Minimum Average Roll Values (unless otherwise stated) and are based on a 95% confidencelevel. (MD Machine Direction; TD-Transverse Direction , also called Cross Direction) RAUGRID™ is manufactured from polyester with a molecular weight (Mn ) > 25,000 grams/mole and Carboxyl EndGroups (CEG's) < 30 mmol/kg.
LTDS (MD) = TULTIMATE (MD) = 97.0 = 50.4 kN/m RFCR • RFID • RFD 1.52 x 1.1 x 1.15
LÜCKENHAUS NORTH AMERICA, INC. 841 East Main Street, Spartanburg, SC 29302 • Tel: 800/794-0910, 864/583-8663 • Fax: 864/583-8664
E-Mail: luckenhaus@bellsouth.net
RAUGRID™ Geogrids are distributed by CARTHAGE MILLS 4243 Hunt Road, Cincinnati, OH 45242 • Tel: 800-543-4430, 513/794-1600 • Fax: 513/794-3434
Partial reduction factors: RFCR= for creep deformation RFID = for installation damage RFD = for biological and chemical degradation
-
RG_Met_All_9-8-99
RAUGRID™ 13/3 - 20 GEOGRIDLückenhaus Raugrid™ geogrids, for soil and aggregate reinforcement, are manufactured of hightenacity, high molecular weight, polyester yarns, woven into a stable interlocking grid and then PVCcoated to provide damage protection during installation. Raugrid™ geogrids, developed for thereinforcement of steepened slopes and segmental retaining walls, and for road base stabilization, are:• biologically inert, resistant to most naturally encountered chemicals, alkalies, and acids• resistant to ultra violet exposure and installation damage• resistant to long-term creep• flexible for easy installation
Physical Properties of Raugrid™ 13/3 - 20 Geogrid PROPERTY UNIT TEST METHOD VALUE¹
WEIGHT (Average) g/m² ASTM D-5261 592
APERTURE SIZE (Average) MD TD mm Measured w/calipers 20 20
PERCENT OPEN AREA (Average) % COE method 60+
WIDE WIDTH TENSILE STRENGTH @ ULTIMATE MD
TD 124.8 30.5
@ 5 % Strain
MD TD
kN/m ASTM D-4595 37.2 8.3
ELONGATION AT BREAK MD TD % ASTM D-4595 13.9 13.0
Long Term Design Strength (LTDS) RFCR=1.52,RFID=1.1,RFD=1.15 MD kN/m
AASHTO 1996
64.9
Roll Dimensions (Width x Length) Roll Area Roll Weight (Average)
m
m² kg
5 x 50 250 168
1 All values stated here are Minimum Average Roll Values (unless otherwise stated) and are based on a 95% confidencelevel. (MD Machine Direction; TD-Transverse Direction , also called Cross Direction) RAUGRID™ is manufactured from polyester with a molecular weight (Mn ) > 25,000 grams/mole and Carboxyl EndGroups (CEG's) < 30 mmol/kg.
LTDS (MD) = TULTIMATE (MD) = 124.8 = 64.9 kN/m RFCR • RFID • RFD 1.52 x 1.1 x 1.15
LÜCKENHAUS NORTH AMERICA, INC. 841 East Main Street, Spartanburg, SC 29302 • Tel: 800/794-0910, 864/583-8663 • Fax: 864/583-8664
E-Mail: luckenhaus@bellsouth.net
RAUGRID™ Geogrids are distributed by CARTHAGE MILLS 4243 Hunt Road, Cincinnati, OH 45242 • Tel: 800-543-4430, 513/794-1600 • Fax: 513/794-3434
Partial reduction factors: RFCR= for creep deformation RFID = for installation damage RFD = for biological and chemical degradation
-
RG_Met_All_9-8-99
RAUGRID™ 15/3- 20 GEOGRIDLückenhaus Raugrid™ geogrids, for soil and aggregate reinforcement, are manufactured of hightenacity, high molecular weight, polyester yarns, woven into a stable interlocking grid and then PVCcoated to provide damage protection during installation. Raugrid™ geogrids, developed for thereinforcement of steepened slopes and segmental retaining walls, and for road base stabilization, are:• biologically inert, resistant to most naturally encountered chemicals, alkalies, and acids• resistant to ultra violet exposure and installation damage• resistant to long-term creep• flexible for easy installation
Physical Properties of Raugrid™ 15/3-20 Geogrid PROPERTY UNIT TEST METHOD VALUE¹
WEIGHT (Average) g/m² ASTM D-5261 643
APERTURE SIZE (Average) MD TD mm Measured w/calipers 20 20
PERCENT OPEN AREA (Average) % COE method 60+
WIDE WIDTH TENSILE STRENGTH @ ULTIMATE MD
TD 148.0 34.6
@ 5 % Strain
MD TD
kN/m ASTM D-4595 33.8 7.5
ELONGATION AT BREAK MD TD % ASTM D-4595 11.8 12.8
Long Term Design Strength (LTDS) RFCR=1.52,RFID=1.1,RFD=1.15 MD kN/m
AASHTO 1996
77.0
Roll Dimensions (Width x Length) Roll Area Roll Weight (Average)
m
m² kg
5 x 50 250 179
1 All values stated here are Minimum Average Roll Values (unless otherwise stated) and are based on a 95% confidencelevel. (MD Machine Direction; TD-Transverse Direction , also called Cross Direction) RAUGRID™ is manufactured from polyester with a molecular weight (Mn ) > 25,000 grams/mole and Carboxyl EndGroups (CEG's) < 30 mmol/kg.
LTDS (MD) = TULTIMATE (MD) = 148.0 = 77.0 kN/m RFCR • RFID • RFD 1.52 x 1.1 x 1.15
LÜCKENHAUS NORTH AMERICA, INC. 841 East Main Street, Spartanburg, SC 29302 • Tel: 800/794-0910, 864/583-8663 • Fax: 864/583-8664
E-Mail: luckenhaus@bellsouth.net
RAUGRID™ Geogrids are distributed by CARTHAGE MILLS 4243 Hunt Road, Cincinnati, OH 45242 • Tel: 800-543-4430, 513/794-1600 • Fax: 513/794-3434
Partial reduction factors: RFCR= for creep deformation RFID = for installation damage RFD = for biological and chemical degradation
Raugrid Raugrid Specifications
top related