rechargeable led work lamp ml ca 110 m de 4113/ml ca 120 m ch 4113 ml ca 120 m de 4113 ... ·...

Post on 28-Mar-2020

4 Views

Category:

Documents

0 Downloads

Preview:

Click to see full reader

TRANSCRIPT

5

D Rechargeable LED work lamp ML CA 110 M DE 4113/ML CA 120 M CH 4113 ML CA 120 M DE 4113/ML CA 120 M FR 4113

TECHNICAL sPECIFICATIONs:

sAFETy NOTEs:• Pleasereadtheoperatinginstructionscarefullypriortouseanddonotthrowthemaway.• Priortoeveryuse,checkthelampandpoweradapterfordamage. Neverusethelamporpoweradapterifthereisanydamage.Inthiscase,pleasecontactanelectricianorwritetotheserviceaddressprovidedbythemanufacturer.

Non-compliance may result in risk to life due to electrical shock! • Neveropenthedevice.Thelampdoesnotcontainanycomponentsthatrequiremaintenance.TheLEDscannotbereplaced.

• Donotusetheworklampinexplosiveenvironmentsinwhichflammableliquids,gasesordustsarepresent.Risktolife!

• Thelampisprotectedagainstspraywater.Neverimmersethelampinwaterorotherliquids.

Riskofexplosionandfire!

Type description ML CA 110 M DE 4113Output: 10WRechargeablebatteries: Li-Ion3.7V,4400mAh(cannotbereplaced)Operatingtime: approx.3h(100%)or6h(50%)Chargingtime: dependsonpowersupplyunit,approx.4.75hours,

atmax.chargingcurrent1AUSBoutlet: 5V,max.1AProtectionclass: IP54(onltifthetransparentcoverisclosed)Protectionclass: IIITemperaturerange: -10°C–+40°C

Type description ML CA 120 M DE 4113 / ML CA 120 M FR 4113 / ML CA 120 M CH 4113Output: 20WRechargeablebatteries: Li-Ion7.4V,4400mAh(cannotbereplaced)Operatingtime: approx.3h(100%)or6h(50%)Chargingtime: dependsonpowersupplyunit,approx.5hours,

atmax.chargingcurrent2AUSBoutlet: 5V,max.1AProtectionclass: IP54(onltifthetransparentcoverisclosed)Protectionclass: IIITemperaturerange: -10°C–+40°C

17P150_Akku_LED_Arbeitsstrahler_171212_KW1118.indd 5 14.03.18 15:20

6

D Operating Instructions Rechargeable LED work lamp

• Keepchildrenawayfromthelamp.Childrenareunabletoassessthedangersofelectriccurrent.

• Useonlytherecommendedpowersupplyunittochargethebatteries.Usingotherpowersupplyunitscandamagethebatteriesorresultinanexplosion!

• Switchthelampoffbeforeyoucleanit.Cleanthelampregularlywithadry,lint-freecloth. Toremovedirt,adampclothcanbeused.Donotuseanysolvents,causticcleaningagents,etc.• Donotlookdirectlyatthelighttoavoidbeingblinded.

sET-UP/ MOUNTNG THE LAMP:Usingthemulti-level,foldingbracket,thetiltangleofthelampcanbeadjustedasneeded.Thelampcanbehunguponahookusingthebracket.Thelampcanbeattachedtometallicsurfacesbymeansofthemagneticholderwhich,dependingonthescopeofdelivery,iseitherincludedoravailableseparatelyasanaccessory.Forthispurpose,simplyattachthemagneticholdertothebracketofthelight.Pleaseensurethatthemagneticholderisfirmlyseatedinordertoavoidpossibledamagescausedbythefallinglight.

BATTERy LEVEL INDICATOR (B):Displays the current charging status of the battery, or, how much energy is still available.If all 4 LEDs are lit, the battery is fully charged. If the battery is nearly empty, the LEDblinks5 times and thebattery status indicatorblinks continuously. Then the lampwill remain lit forapprox. 5-10 minutes, before the deep discharge protection shuts the lamp off. This leavesenoughtimetofinishworking.

1 2 3

swITCHING THE LAMP ON/OFF:Pressthebutton(A)toswitchthelampon.Thelampwillshineat100%brightness.Ifthebuttonispressedagainwithin2seconds,thelampwillswitchto50%mode.Whenselecting50%,theservicelifeofthelampextendsincomparisontothe100%settingasitconsumeslessenergy.Pressthebuttonagaintoswitchthelampoff.

(similar to fig�)

BCAD

17P150_Akku_LED_Arbeitsstrahler_171212_KW1118.indd 6 14.03.18 15:20

7

DRechargeable LED work lamp Operating Instructions

CHARGING UNITs wITH A UsB CABLE (E�G� sMARTPHONEs):Suitableforproductswithachargingcurrentofupto1000mA.TochargetheunitwithaUSBcable,connectittotheUSBchargingport(C)underthetransparentcoveronthebackoftheunit.Closethecapaftercharging.

CHARGING THE BATTERy:• Toensureoptimumfunctionality,werecommendcompletelydrainingtheintegratedbatteryduringthefirstuseandthefullyrechargeit.

• ThemicroUSBchargingport(D)forchargingthebatterisunderthetransparentcaponthebackoftheunit.ConnectthechargingporttoaconventionalUSBpowersupplyunit,asusedforsmartphones,digitalcameras,etc.,usingtheprovidedUSBcable.Thechargingtimedependsonthepowersupplyused.SeesectionTECHNICALDATAforfurtherinformation.

• Usethebatterylevelindicator(seedescriptionabove)todeterminethebatterylevel.Ifall4LEDsarelit,thebatteryisfullycharged.

• Thelampcanbeoperatedwhilecharging,however,ithastobeswitchedto50%mode.Thechargingdurationincreasessignificantlyinthisoperatingmode.

• Ifthelightisnotusedforanextendedperiodoftimethebatterymustbechargedapproximatelyevery3monthstoensurealongbatterylifespan.

• Aftercharging,makesuretoclosethechargingportwiththecap.

DisposalDo not dispose of electrical appliances with the household rubbish!InaccordancewithDirective2012/19/EConwasteelectricalandelectronicequipmentandthe correspondingnational law,usedelectrical equipmentmustbe separated from therubbishandreusedorrecycledinanenvironmentallyresponsiblemanner.Pleasecontactyourlocalauthoritiesforavailabledisposaloptionsforyouruseddevice.

Incorrect disposal of batteries and rechargeable batteries can harm the environment!Batteriesandrechargeablebatteriesdonotbelonginthehouseholdwaste.Theycancontainpoisonousheavymetalsandaresubjecttotreatmentashazardouswastes.Takeyourusedbatteriestoamunicipalcollectionsite.

ManufacturerHugoBrennenstuhlGmbH&Co.KGSeestraße1–3·D-72074Tübingen

H.BrennenstuhlS.A.S.4ruedeBruxelles∙F-67170Bernolsheim

lectra-tagBlegistrasse13·CH-6340Baar

PleasevisittheService/FAQsectionofourhomepage,www.brennenstuhl.com,formoreinformation.

17P150_Akku_LED_Arbeitsstrahler_171212_KW1118.indd 7 14.03.18 15:20

top related