resume...2018/08/20 · 1 resume name : dr. v. selladurai m.e., ph.d., date of birth : 16.05.1958...
Post on 28-May-2020
4 Views
Preview:
TRANSCRIPT
1
RESUME
Name : Dr. V. SELLADURAI M.E., Ph.D.,
Date of Birth : 16.05.1958 Professor V.Selladurai, Principal, CIT, obtained his Ph.D. in Mechanical Engineering 1994 from
Bharathiar University (PSG Tech), Master‘s Degree in Mechanical Engineering (Industrial
Engineering Specialization) 1982 from Madras University (PSG Tech), Bachelor‘s Degree in
Production Engineering 1980 from Madras University (PSG Tech).
Following his academic qualification, he holds 2 years of work experience as a Systems /
Industrial Engineer. Holding a strong academic and industrial exposure, Professor Selladurai moved
to academics, where he holds 31 years of teaching, research and administrative experience
working at different levels in CIT. He holds his specializations in Manufacturing Systems Engineering,
Optimization Techniques, Industrial and Production Engineering.
Working as an academician, Professor Selladurai has contributed vividly both to industry and
academia. His contribution includes 210 national journals, international journals and conference level
publications; this is with providing individual guidance to more than 30 Ph.D. research scholars. He
had chaired, organized and conducted numerous workshops, seminars and conferences.
His developmental work includes obtaining grant from funding bodies alike; AICTE, UGC and DST
research projects and delivered new laboratories in different disciplines. He is currently the Principal
of Coimbatore Institute of Technology, Chairman, INDIAN WELDING SOCIETY, Coimbatore
Local Center.
Areas of Expertise
Manufacturing Systems Engineering
Industrial Engineering
Production Engineering
Operations Research
2
ACADEMIC QUALIFICATIONS Ph.D.: (Bharathiar University, PSG College of Technology, Coimbatore)
Completed in October 1994 in Mechanical Engineering with the specialization of
Manufacturing Systems Engineering
Thesis title : Dynamic Analysis of Manufacturing Systems for Optimal Performance
M.E.: (Madras University, PSG College of Technology, Coimbatore)
Completed in 1982 in Mechanical Engineering – (Industrial Engineering)
Scored First Class
B.E.: (Madras University, PSG College of Technology, Coimbatore )
Completed in 1980 in Production Engineering
Scored First Class
INDUSTRIAL EXPERIENCE
Address for Communication
Office:
Principal, Professor and Head,
Department of Mechanical Engineering,
Coimbatore Institute of Technology,
Coimbatore - 641 014, INDIA.
Ph. 0422- 2573187, 2574071, 2574072
Email: profvsdcit@yahoo.com,
principal@cit.edu.in
Mobile:( 0) 9363227757
Residence:
9/11, Sree Velmurugan Nivas
Palanisamy Naidu Layout, Street I
Nehru Nagar East
SITRA Kalapatti Road
Coimbatore - 641 014, INDIA.
Ph. 0422-4365252
Mobile:(0) 9363227757
S.No. Industry Position Peri
od
1 M/s. Shanthi Gears Ltd.,
Coimbatore
Marketing and
Systems Engineer
07.07.1982 to
10.08.1983
2 M/s. Associated Management
Consultants, Salem – at M/s Sakthi
Sugars Ltd.
Consultant
12.08.1983 to
20.11.1983
3 Salem Productivity Council
Salem
Junior Industrial
Engineer
20.11.1983 to
09.01.1984
4 M/s. Besantraj Consultants
Madras – at Sundaram Fasteners Ltd. Consultant
18.01.1984 to
31.07.1984
3
ACADEMIC EXPERIENCE
S.No. Institution Position Period
1 Coimbatore Institute of Technology
Coimbatore - 641 014.
Lecturer in Mechanical
Engineering
01.08.1984 to
13.06.1996
2 Coimbatore Institute of Technology
Coimbatore - 641 014.
Assistant Professor in
Mechanical Engineering
14.06.1996 to
24.09.2001
3 Coimbatore Institute of Technology
Coimbatore - 641 014.
Professor in Mechanical
Engineering
25.09.2001 to
30.11.2006
4 Coimbatore Institute of Technology
Coimbatore - 641 014.
Professor and HOD,
Department of Mechanical
Engineering
01.12.2006
onwards.
5 Coimbatore Institute of Technology
Coimbatore - 641 014. Vice-Principal
24.10.2008 to
31.05.2009
6
Coimbatore Institute of Technology and
CIT Sandwich Polytechnic College
Coimbatore - 641 014.
Principal I/C
01.06.2009 to
08.06.2009.
7 Coimbatore Institute of Technology
Coimbatore - 641 014. Principal
09.06.2009
onwards.
RESEARCH EXPERIENCE
S.No. Institution Position Period
1 PSG College of Technology
Coimbatore - 641 004.
QIP - Ph.D. Research
Scholar
02.07.1990 to
01.07.1993
2 Guiding Ph.D. Research Scholars from 1995 February onwards under
Bharathiar University and ANNA University.
4
ADMINISTRATIVE & ADVISORY EXPERIENCE
S.No. Institution Position Period
1 PSG College of Technology
Coimbatore - 641 004. QIP-Ph.D Research Scholar
02.07.1990 to
01.07.1993
2 Coimbatore Institute of Technology
Coimbatore - 641 014.
Assistant Controller of
Examinations, Autonomous
System
02.01.1996 to
01.08.1997
3 Coimbatore Institute of Technology
Coimbatore - 641 014. Workshop Superintendent 01.06.1998 onwards
4 Coimbatore Institute of Technology
Coimbatore - 641 014. Additional Placement Officer
02.06.2003 to
31.07.2004
No. of Jobs. :250
5 Coimbatore Institute of Technology
Coimbatore - 641 014. Placement Officer
01.08.2004 onwards
No. of Jobs obtained:
(2004-05) - 340
(2005-06) - 532
(2006-07) - 516
(2007-08) - 642
6 Institution of Engineers (India)
Coimbatore Local Centre Honorary Secretary
October 2004 to
October 2006
7 Anna University Coimbatore Chairman, Faculty of
Automation and Robotics
March 2007 to
May 2010
8 Institution of Engineers (India)
Coimbatore Local Centre Chairman
October 2008 to
October 2010.
9
Institution of Engineers (India)
Production Engineering Division
Board
Division Board Member 2008 – 2010
10 Institution of Engineers (India)
Kolkata (HQ)
National Council Member 2008 – 2010
Regional Co-ordination
Committee Member 2008 – 2010
Member Examination,
Evaluation, Accreditation
Council
2008 - 2010
11 Indian Welding Society
Coimbatore Chapter Chairman
October 2011 to
October 2013
5
CONTRIBUTIONS TO ACADEMIA
Member, affiliating committees of Anna University Chennai (2004 – 06).
Doctoral committee member for PhD scholars of Anna University Chennai, Anna University
Coimbatore.
Chairman and Member of Affiliating Committees of Anna University Coimbatore (2007-08,
2008-09, 2009-10).
Member, Board of Research, Anna University Coimbatore, May 2007 onwards.
Member, Result Passing Board, Anna University Coimbatore, November 2007, May 2009.
Member, Academic Council, KSR College of Technology, Thirugengodu (2008-09, 2009-10).
Member, Result Passing Board, KSR College of Technology, Thirugengodu (2008-10).
Governing Council Member (2009 -2011 Anna University Coimbatore Nominee) Kalaingnar
Karunanidhi Institute of Technology, KTVR Knowledge Park College of Engineering and
Technology, KSR Institute of Technology.
Member Governing Council (2009-2011) Nachimuthu Polytechnic,Pollachi.
Member, Board of Studies (Autonomous Colleges 2008-09, 2009-10).
- Mechanical Engineering, Kongu Engineering College, Erode.
- Mechanical Engineering, Sri Ramakrishna Engineering College, Coimbatore
- Mechatronics Engineering, Kumaraguru College of Technology, Coimbatore
- Mechatronics Engineering, KSR College of Technology, Thirugengodu.
Member, AICTE and DOTE Approval Committee for Engineering and Technology Institutions.
ADMINISTRATION / CO-ORDINATION WORK UNDERGONE AT CIT
Assisting the Management and the Principal.
AICTE /DST/UGC Research and Modernization Project Proposals preparation and
implementation.
NBA Accreditation (January 2005 and December 2008) activities.
University Affiliation Activities.
Handling a unique subject ―Science of Creativity and Personality Development‖ since
1987 onwards.
Chairman Board of Studies – Mechanical Engineering, December 2006
onwards.
Member in Academic Council, Planning and Evaluation Committee, Research Board,
Curriculum Development Cell, Library Committee, Disciplinary Committee, Finance
Committee, Standing Committee and Result Passing Board.
6
MoUs SIGNED
1. Loughborough University, UK.
Department of Mechanical and Manufacturing Engineering – July 2000 for PhD/ PDF/
Short term Courses and Exchange of Faculty.
2. Defense Research Development Laboratory, Hyderabad, India.
CFD Group – August 2001, M.E./M.Tech. Projects, Consultancy and Training
Programmes
3. University of Massachusetts, Dartmouth, USA.
February 2003 – Conferences, Exchange of Faculty and Faculty Training and faculty
visits.
4. Tata Consultancy Services, Chennai.
July 2006 - Faculty Development Programme, Workshop, Students Technical
Activities and Training.
5. Robert Bosch India Limited, Bangalore.
June 2007 - Faculty Development Programme, Workshop, Students Technical
Activities and Training and setting-up of Bosch Corner.
6. National Informatics Center, Government of India.
November 2007- National Informatics Centre (NIC), Department of information
Technology, Ministry of Communication & Information Technology, Research and
Training Programme for faculty, students and practicing engineers in CollabCAD.
7. FLSmidth Private Limited, Chennai.
June 2008 - FLSmidth Private Limited, Chennai - Faculty Development Programme,
Workshop, Students Technical Activities and Training.
8. USA(June 2009)
Oklahoma State University, Stillwater – MoU signed for Education and
ResearchTexas Tech University, Lubbock –MoU signed for Education and Research
9. IBM September 2009 - Establishment of Center of Research and Technology
Excellence (RTE), Introduction of a post graduate programme, curriculum
jointly developed by IBM and CIT, Faculty and students development
programmes.
10. CPRI, Bangalore, Ministry of Power, Government of India, CDAC,
Thiruvananthapuram, A Scientific Society of the Ministry of Communications
and Information Technology, Government of India, and Tamil Nadu Electricity
Board – February 2010 “ Development of Dynamic Voltage Restorer”.
11. Novel India Pvt. Ltd, Bangalore. April 2010 – Academic Training and Partner
Mentoring Programme.
7
12. Bergen University College, Faculty of Engineering (HiB) Bergen, Norway,
January 2011- Education and Research Collaboration.
13. AMD (USA), Bangalore, March 2011- Strategic initiatives to enable the next
generation of software developers.
14. CENTRO DE INVESTIGATION Y DE ESTUDIOS AVANZADOS DEL IPN
(CINVESTOV), MEXICO – July 2011, Scientific Technological and Academic
Collaboration.
15. SAMSUNG Mobile Innovator CIT Program Agreement October 2011- Mobile
Communication, Education and Research Initiatives.
16. Cooperative agreement between Kyungpook National University, South Korea & Department of CSE & IT, CIT December 2012
PLACES of VISIT
1. USA (April / May 2005)
- Massachusetts institute of Technology
- University of Massachusetts, Dartmouth
- Boston University
- Harvard University
- Connecticut State University
2. UK (May 2005)
- Loughborough University
- Nottingham University
- University of Sheffield
- Birmingham University
- East London University
- Imperial College
3. USA (April/May 2008)
- UMASSD, Dartmouth
Presented the research article entitled, ―Supplier Selection through Analytical
Hierarchy Program and Fuzzy Set Theory‖, on 28 April 2008, at CCB-BIRC.
Participated in the Executive on Campus event, led by the CEO of Bed, Bath
and Beyond, Mr.Eisenburg, a $7.5 billion dollar company on 30 April 2008.
- Wichita State University
Presented the research article entitled, ―Flexible Parallel Machine Scheduling‖,
at Industrial and Manufacturing Engineering Department on 22 May 2008.
- University of Michigan, Ann Arbor.
8
4. Dubai (August –September 2008)
- Visit to Academic Village
5. USA (September 2008)
- UMASSD, Dartmouth
- Wichita State University, KS.
6. Thailand (November 2008)
- Naresuan University, Phitsanulok
Presented a Technical paper, ―Information Technologies for Knowledge
Management: Their Usage and Effectiveness‖. Asian Institute of Technology
Visited the School of Engineering and Technology and School of
Environment, Resources and Development for possible partnership in
Research and Development Programs.
7. USA(June 2009)
- Oklahoma State University, Stillwater – MoU signed for Education and
Research
- Texas Tech University, Lubbock –MoU signed for Education and Research
8. USA(May 2012)
- Stanford University
- Massachusetts Institute of Technology
- Oklahoma State University
- University of Massachusetts (Dartmouth)
9. UK(Jan 2013)
- University of Strathclyde, Glasgow
- Loughborough University
- Imperial College London
- University of Aberdeen
10. UK and USA (May 2013)
- University of Strathclyde, Glasgow
- Imperial College London
- University Of Massachusetts, (Dartmouth)
- University of California, Santa Barbara
- Stanford University
9
POST GRADUATE PROGRAMME INSTITUTED
M.E. in Advanced Manufacturing Technology from July 2005 onwards.
M.E. in Communication Engineering from July 2010 onwards.
M.E. in Construction Management from July 2011 onwards
M.E. in Computer Science and Engineering from July 2012 onwards
UNDERGRADUATE PROGRAMME ENHANCED
B.E. Mechanical Engineering (Additional Section) from 2009-2010 onwards.
B.E. Civil Engineering (Additional Section) from 2012-13 onwards
B.E. Electrical and Electronics Engineering (Additional Section) from 2013-14
onwards
B.E. Computer Science and Engineering (Additional Section) from 2013-14
onwards
LABORATORIES DEVELOPED
1. Augmentation of Basic Workshops (2001)
Carpentry
Fitting
Sheet Metal and Plumbing
Electrical Wiring and Home Appliances Laboratory
2. Augmentation of Lathe and Special Machines Section -2005.
3. Establishment of CAD/CAM/CIM Laboratories (August 1997).
4. Establishment of Advanced Metrology and Machining Laboratory (June 2005, 2008).
10
RESEARCH PROJECTS RECEIVED AND IMPLEMENTED
Academic
Year TITLE OF THE PROJECT
Amount Received
in Lakhs
1994-95 MODROB – Modernization of Manufacturing Systems Lab 5.00
1995-96 TAPTEC – Computer integrated Manufacturing 6.00
1995-96 OFFICE AUTOMATION for COE office 6.00
1996-97 R&D - Development of Neural Based FMS Simulator 7.00
1996-97 TECHNOLOGY FORECASTING - Development of Dynamic
Intelligent Manufacturing System Simulator 3.00
1999-2000 R&D - Development of job-shop scheduler through parallel
processing and hybrid modeling for optimal performance 4.00
2002-2003 FIST Programme of DST, Manufacturing System Simulator 15.00
2003-2004 AICTE - RPS- Analysis of cutting tool flank wear using force
ratio and evolutionary techniques to improve surface finish 10.50
2008-2009 AICTE- MODROB Modernization of Mechanical Engineering
Laboratories 15.00
2011-12 AICTE-MODROB Modernization of Heat Transfer Laboratory 14.80
2011-12 FIST Programme of DST, Level I Basic Research and
Teaching 70.00
2012-13 MHRD – Centre for Excellence Manufacturing Science 200.00
2013-14 TEQIP – Phase II 1.1 1250.00
Total Rs. 1606.30
SPONSORED RESEARCH PROJECTS COORDINATED
Academic Year
TITLE OF THE PROJECT Amount Received
in Lakhs
2006-2007 AICTE - Reliability Analysis of Software based
Mechatronics system using Virtual Instrumentation. 8.00
2006-2007
AICTE - Modelling and Optimization of Process Parameters
of Wire EDM based on Robust Design for improved surface
finish
10.00
2007-2009 NRB - Friction Stir welding of Aluminium Titanium boride
metal matrix composites 15.96
2007-2009 UGC - Production and characterization of Nano- sized
semiconductor crystallites of CdS and CdTe 8.50
Total 42.46
11
MAJOR EQUIPMENTS PURCHASED AND INSTALLED DURING MY TENURE AT CIT
CYBER MILL - CNC Milling Machine from Feedback Instruments Ltd., UK
Silicon Graphics O2 Work Stations - 2 Nos.
EUROBTEC - Work Cell EL Module- (GERMANY)
MATLAB and Simulink
I-DEAS from SDRC 2 Nos.
Promodel- Manufacturing Simulation Software
FLUENT - Computational Fluid Dynamics Windows NT Software
CATIA, ARENA, ANSYS for CIM Laboratory
Mitutoyo/Coordinate Measuring Machine /QM-Measure 333
Mitutoyo/Tool Maker‘s Microscope
Mitutoyo/ Profile Projector PJ-A3000
Labovision Ferascan FE PRO 900
IDEAS NX CAD Bundle: Artisan + Surfacing v11 with SE and SW
NX(VIRTUAL NC) and Machine Simulation
eM - Workplace (IGRIP)
Pneumatic Circuit with PLC
LMW Smartturn CNC Lathe and VMC LV 65
Wire Cut EDM - (EZEE cut) Electronica
SYNERGIC GMA/GTA/MMA WELDING SYSTEM From Esseti, Italy with PC
Interface
Automatic Welding Manipulator
Automatic Hardfacing Manipulator
AC GILL Corrosion resistance measuring system with software.
Ferritescope with PC interface
DAQ - 6024 - E, BNC 2120 Lab View software
Ph.D. GUIDED AND AWARDED
1. ―Analysis on Performance Measurements of Manufacturing Systems using Synchronous
Principles for Higher Productivity‖ – R.Sivasubramanian, March 2001.
2. ―Performance Analysis of Small and Medium Enterprises through Re-Engineering‖ -
R. Subramanian, January 2002.
3. ―Analysis and Determination of Batch Size for Multi-Stage, Multi-Facility and Multi-Product
Manufacturing Systems‖ - P.Nagaraj, June 2002.
4. ―An investigation on integration of DBR (Drum Buffer Rope) and JIT (Just in Time)
Philosophies for Kaizen in Small and Medium Enterprises‖ - N.Rajam Ramasamy, December
2002
5. ―Enterprise Modelling for Attaining, Reengineered Vital Quality Drivers‖ – V.Senthil, January
2003
6. ―Investigation of Machine Tool Chatter by Optimal Tool Parameters using Evolutional
Algorithm‖ – T. Alwarsamy, July 2005.
12
7. ‗Performance Analysis on Parallel Machine Scheduling through Hybrid Dispatching Rules‖
- P.V Senthiil, November 2005.
8. ―Investigation on the Effect of Transformation Strain in Constitutive Modeling of Shape
Memory Alloy‖, S.P.Arul, April 2006.
9. ―Closed form Solution for Acceptance Sampling using Artificial Neural Networks‖,
D.Vasudevan, May 2006.
10. ―Design and Optimization of Manufacturing Facilities Layout‖, K.Balamurugan, October 2006.
11. ―Modelling and Analysis of Sustainable Development through Green Productivity‖, N.Mohan
Das Gandhi, September 2007.
12. ―An Exploration on the Adoption of Executive Support System for Strategic Maintenance
Quality Engineering Model‖, K.Elangovan, March 2008.
13. ―Analysis of Flexible Parallel Machine Scheduling through Metaheuristics‖, K. Raja, April
2008.
14. ―Experimental investigations on the impact of turning parameters for maximizing tool life‖,
P.Thangavel, June 2008.
15. ―An investigation into the use of Hybrid Search Techniques for Job-Shop Scheduling problem
to minimize makespan‖, P.Senthil Velmurugan, September 2008.
16. ―Investigation of Total Quality Function Deployment for Continuous Improvement in Batch
Manufacturing System‖, S.Venkatachalam, December, 2008.
17. ―Analysis of Agile Manufacturing System for Optimal Performance‖, C.Arumugam, December,
2008.
18. ―Experimental investigations on the Performance of Environmentally Friendly Refrigerant
Mixtures in a Vapour Compression Refrigeration System as Alternate to CFC12 and
HFC134A‖, K.Mani, December, 2008.
19. ―Analysis on Multi-Criteria Decision Making for Supplier Selection‖, G.Sasikumar, March
2009.
20. ―Analysis on Cell formation in Cellular Manufacturing Systems towards Optimal
Performance‖, M. Murugan, May 2009.
21. ―Analysis of the Effects of Process Parameters in End Milling on Silicon Particulate
Aluminium Metal Matrix Composite Materials‖, B.Ganesh Babu, May 2009.
22. ―Some study on Knowledge Management Educational System for faculty allocation in a
Flexible Technical Curriculum‖ V.K.Shanmuganaathan, June 2009.
23. ―Studies on the effect of reinforcements on the mechanical properties of hybrid aluminum alloy
composites‖ – P.Satheyabalan, August 2009
24. ―A Simulated Annealing Methodology for Multi Stage Logistics in Supply Chain Management‖ –
P.Manimaran, December 2009
13
25. ―An exploration on adoption of inventory optimization using metaheuristic techniques‖ – S.Narmada ,
March 2010
26. ―Fluid flow and heat transfer study of slot jet impingement flows‖ – A.Sivasmay, Dec 2010
27. ―Investigation of the behavior characteristics of material used in bio-medical application‖ –
V. Muthukumaran, December, 2010.
28. ―Numerical Analysis of Magnetoconvection in Square Enclosures with Differentially Thermally active
Vertical Walls‖, S.Gokila, December, 2011.
29. ―Nemerical and Experimental Study on Flow and Mixing Behaviour of Transverse turbulent jet in Venturi
– jet Mixer‖, S.Sundararaj, December 2011.
30. :Modelling and Optimization of Airport Runway‖, K.Venkata Rao, Janaury, 2012.
31. ―Optimization of Clearance Variation in Linear and Radial Selective Assembly‖,R.Kannan, October
2012.
32. ―Analysis of Tool Wear and Surface Roughness on Coated Carbide Cutting Tools‖, J.Maniraj, April
2013.
33. ―Predictive Modelling and Optimization approach to Reduce NOx Emissions in Coal Fired Thermal
Power Plant‖, P.Ilamathi, May 2013.
34. ―Investigations on the Implementation of SIX SIGMA Concept in Indian Engineering Colleges‖,
S.Narayanamoorthy, November 2013.
35. ―Multi Criterion Parallel Processing to Enhance the Flexible Machining System Performance
Optimization‖, K.M.senthilkumar, December 2013.
36. ―Exergy Analysis of a Domestic Refrigerator using Environmental Friendly HC Refrigerant Mixtures‖,
R.Saravanakumar, March 2014.
37. ―Design and Analysis of a Working Lathe Bed for Multipurpose Manufacturing Process‖ Babu Jhon,
October 2014.
38. ―Analysis, Optimization, Productivity a Measurement and Monitoring at EOU‖, G, Kannan, October
2014.
39. ―Experimental Investigations on a Bio Fueled DI Diesel Engine to Reduce NOx and Smoke Emissions‖
K Sivasami, December 2014.
40. ―FEM – Based Fracture Mechanic Analysis of Flat and Curved Panels with multi-Site Damages‖,
R.Elangovan, March 2015.
41. ―Performance studies on liquid desiccant dehumidifier of air conditioning system‖, D.Sreenivasan,
September, 2015.
42. ―Investigation of Projects Using Simulation and Non Traditional Optimization Techniques‖, S.Vairam,
October, 2015.
43. ―studies on flat thermosyphons with coated surfaces‖ R.Renjith singh November, 2016.
44. ―Analysis and selection of suppliers in a green supply chain environment‖ R.Sivapragasam February,
2017
14
M.S. BY RESEARCH GUIDED AND AWARDED
1. ―Analysis of Cell formation using Metaheuristics and Memetic Algorithm‖, R.Sivaprakasam,
October 2008.
DOCTOR OF SCIENCE (D.Sc.) THESIS EVALUATED AND VIVA VOCE EXAMINATION
CONDUCTED
1. “Development of Strategic Quality Engineering Accounting System‖, Bharathiar University‖,
Coimbatore, Dr. S.R.Devadasan, June 2008.
Ph.D. THESIS EVALUATED
1. “Stochastic Processes in Cellular Manufacturing Environment‖ – Madhusudanan Pillai
(January 2005), National Institute of Technology, Calicut.
2. ―Heuristic Search Algorithms for Scheduling in Flow Shops with Lot Streaming‖ –
S.Marimuthu (June 2005), Manonmaniam Sundaranar University, Tirunelveli.
3. ―Decision Support System for Production Planning in SSI Units using Management Science‖,
(January 2006) A.Jawahar Babu, JNTU, Hyderabad.
4. ―Optimization Techniques for Multi-Objective Supplier Selection with Quantity Discounts
using Integer Linear Programming and Meta Heuristics‖, N.Arunkumar, (August 2006), Anna
University, Chennai.
5. ―Parametric Evaluation of Quality Turned Components Through Optimization Techniques‖,
T.Srikanth (April 2009), Osmania University, Hyderabad.
6. ―Experimental Investigation and statistical analysis on mechanical properties of Aluminium
based metal matrix composites‖‘ A.Suresh Babu, Anna University Chennai, August 2009.
7. ―Reliability based design optimization of composite drive shaft using heuristics‖, D.Jabakani,
Anna University, Chennai, September 2009.
8. ―Design and development of a quality information system of excellence in technical
education‖ – P.Karuppuchamy, Anna University Chennai, January 2010.
9. ―Eigenvalue Reanalysis of simple and compound beam structures with and without damping
treatment using structural dynamic modification‖, - M.Lakxmi Kanta Reddy, JNTU Anantapur
January 2010.
10. ―Predicting the properties of Aluminum Silicon Eutectic alloy subjected to modification and
vibration during solidification‖, K.Srinivasalu Reddy, JNTU Kakinada, January 2010.
15
Ph.D. PUBLIC VIVA-VOCE EXAMINATION CONDUCTED
1. “Genetic Based Decision Models for Intelligent Manufacturing System‖ - T.K.Kurian,
University of CALICUT, REC, Calicut, October 1999.
2. ―Studies on Grind Hardening Effect in Cylindrical Grinding‖ - V.S.K.Venkatachalapathy,
Department of Production Technology, MIT, Anna University, Chennai - 600 044, 2005.
3. ―Studies on Parametric influences of CNC Wire EDM Process for Machining of AISI 02 Tool
Steel and inconel 718‖, - S.Ramakrishnan, Anna University, Chennai, 2006.
4. ―Heuristic Search Algorithms for Scheduling in Flow Shops with Lot Streaming‖, -
S.Marimuthu, Manonmaniam Sundaranar University, Tirunelveli, April 2006.
5. ―Flexible Manufacturing System Scheduling‖, - K.S.Badarinarayan, National Institute of
Technology, Calicut, February 2008.
6. ―Heuristic and Search Algorithms for Facility Layout Design‖- A.S.Ramkumar, Manonmaniam
Sundaranar University, Tirunelveli, June 2008.
7. ―Study and Analysis of Supplier Selection by Multi Attribute Decision Making and Discrete
Choice Experiment Approaches‖, - B.A.Saravanan, Anna University, Chennai, December
2008.
8. ―Strategic OEE Models for Assessing Real Effectiveness to Improve the Deployment of
Manufacturing Resources‖, - P.Nelson Raja, Anna University, Chennai, December 2008.
9. ―Investigations of Wear and Fatigue on Roller Chains of Motorcycle‖, - P.Sadagopan, Anna
University, Chennai, February 2009.
10. ―Development of an Integrated closed loop performance management model for service
industries‖, R.Parameshwaran, Anna University Chennai, October 2009.
11. ―Experimental Investigation and statistical analysis on mechanical properties of Aluminium
based metal matrix composites‖‘ A.Suresh Babu, Anna University Chennai, November 2009.
12. ―Reliability based design optimization of composite drive shaft using heuristics‖, D.Jabakani,
Anna University, Chennai, November 2009.
13. ―Design and development of a quality information system of excellence in technical
education‖ – P.Karuppuchamy, Anna University Chennai, February 2010.
14. ―Some Investigations on Friction Stir Spot Welding of Age Hardenable Aluminium Alloys‖ –
R.Karthikeyan, Annamalai University, June 2012.
M.S. (BY RESEARCH) EVALUATED
1. ―Experimental Studies on Flow Accelerated Corrosion in Feeder Pipe of Pressurized Heavy
Water Reactor‖, P.Madasamy, Anna University, 2006.
16
AWARDS / PRIZES/CERTIFICATION RECEIVED
1. Received Best Teacher Award in the academic year 1999-2000 instituted by Coimbatore
Institute of Technology.
2. Best Journal Paper Award for the research paper entitled ―Performance improvement
behavior of a small scale enterprises‖, Journal of Industrial Engineering, Indian Institution of
Industrial Engineering, Vol. XXX No.10, October, 2001, pp. 24 - 33 - Received Award on
November 2002, in IIIE National Convention.
3. Best Session Paper Award for D.Vasudevan, V.Selladurai, P.Nagaraj, ―A Closed form
solution to single Sampling Attribute plans indexed by AQL,LQL and AOQL‖, National
Conference on Challenges in Achieving Global Quality, CAGQ, May 25-25, 2004,
Department of Mechanical Engineering, Thiagarajar College of Engineering, Madurai, India.
4. Award of Appreciation: The Board and Members of Project Management Institute, Pearl city
chapter, Hyderabad appreciate the contribution of V.Selladurai for organising the one day
symposium, January 22nd
, 2005 on Project Management as part of PMCDP 2004-05 as
co-ordinator.
5. Best Session Paper Award for K.Elangovan, V.Selladurai, S.R.Devadasan, S.Muthu,
―Executive Support System for Strategic Maintenance Quality Engineering Programme:
An Experimental Model‖, International Conference on (EISCO 2005), January 5-7, 2005.
Kumaraguru College of Technology, Coimbatore.
6. Best Paper Award - Technical Session 2-Third Prize for K.U.Khmeswaran, S.P.Arul,
V.Selladurai, ―Implicit modeling of Shape memory alloy behavior using artificial and neural
network‖. Twelfth National Convention of Electrochemists (NCE-12) - Society for
Advancement of Electrochemical Sciences and Technology (SAEST), Thiagarajar College of
Engineering, Madurai, February 18-19, 2005,
7. Coimbatore Institute of Technology, Outstanding Engineering Institute (South) –
National B School Awards – by STAR News, February 2011.
8. Coimbatore Institute of Technology, Outstanding Engineering Institute (South) –
National B Schools Awards – by ABP News, June 2012.
9. Coimbatore Institute of Technology, Outstanding Engineering Institute (South) –
National Educational Leadership Awards - ET N O W, February 2013.
10. Coimbatore Institute of Technology, Outstanding Engineering Institute (South) –
National B School Awards – by ABP News, June 2013.
11. Outstanding Engineer Award - Production Engineering – Institution of Engineers (India),
Coimbatore Local Center, September 2013.
12. Coimbatore Institute of Technology, Outstanding Engineering Institute (South) - Dainik
Bhaskar National Educational Leadership Awards and STARS GROUP(USA), October 2013.
17
CONFERENCES / COURSES ORGANISED
International Conferences
1. Intelligent Flexible Autonomous Manufacturing Systems (IFAMS 2000) - Towards Rapid
Design Exploration and Optimization, January 10 - 12, 2000.
2. Digital Aided Modeling and Simulation (DAMS 2003) - An evolutionary Approach for
Optimization, January 6 - 8, 2003.
3. Responsive Supply Chain Management (RSC 2004) - A Technology Watch, January 5 - 7,
2004, jointly with University of Massachusetts, Dartmouth, USA.
4. International Conference on Global Manufacturing and Innovation (GMI 2006) -
(An Advanced Optimization Technology Approach), July 27 - 29, 2006, jointly with University
of Massachusetts, Dartmouth, USA, in collaboration with Benchmarking: International
Journal, International Journal of Operational Research and International Journal of Industrial
and Systems Engineering.
5. International Conference on Digital Factory (ICDF 2008), August 11 - 13, 2008, jointly with
Business Innovation Research Center (BIRC), University of Massachusetts, Dartmouth, USA
and in co-ordination with Bench Marking: An International Journal, International Journal of
Industrial and Systems Engineering, International Journal of Indian Culture and Business
Management, International Journal of Business Innovation and Research and International
Journal of Procurement Management.
National Level Conferences
1. Intelligent Manufacturing Systems - A Technology Watch, February 6 - 7, 1998.
2. Strategies for New Product Development, September 9 -10, 2005.
3. Manufacturing & Management of Intelligent Materials, March 17-18, 2006.
Short Term / Winter / Summer Courses Organized
1. Organized “Entrepreneurship Awareness Camp” - Sponsored by Department of Science
and Technology, Government of India, September 8 - 10, 1988.
2. AICTE – QIP – STTP course on Computer Integrated Industrial Systems, March 15 - 29,
1998 for Engineering College Teachers.
3. AICTE SPONSORED Two days workshop on Computational Fluid Dynamics- Modelling and
Applications, January 12 - 13, 2000.
4. UGC sponsored winter short term course on Computational Fluid Dynamics – Theoretical
Modelling and Simulation, January 02 - 10, 2001.
5. International Workshop on Supply Chain Management, jointly with UMASSD, USA, August
19-20, 2005.
18
Industrial Evaluation
1. Study on Job Evaluation and Merit Rating for the Entire Factory System, M/s. Madras
Aluminium Company Ltd., Mettur Dam, 1986-1987.
2. Design, Manufacture and Supply of Spare Parts for Madras Aluminium Company Ltd.,
Mettur Dam, 1997 Onwards.
3. Quality circle evaluator for M/s. ELGI Equipments Ltd., Coimbatore.
PROCEEDINGS EDITED
1. Proceedings of International Conference On Digital Factory (ICDF 2008), August 11-13,
2008, Jointly with Business Innovation Research Center (BIRC), University of Massachusetts,
Dartmouth, USA and in co-ordination with Bench Marking: An International Journal,
International Journal of Industrial and Systems Engineering, International Journal of Indian
Culture and Business Management, International Journal of Business Innovation and
Research and International Journal of Procurement Management.
2. Proceedings of International Conference on Global Manufacturing And Innovation –
(An Advanced Optimization Technology Approach) GMI 2006, July 27 - 29, 2006, jointly with
University of Massachusetts, Dartmouth, USA.
3. Proceedings of the International Conference on Responsive Supply Chain Management
(RSC 2004) - A Technology Watch, January 5-7, 2004, jointly with University of
Massachusetts, Dartmouth, USA.
4. Proceeding of the International Conference on Digital Aided Modelling and Simulation
(DAMS 2003) - An evolutionary Approach for Optimization, January 6 - 8, 2003.
5. Proceeding of the International Conference on Intelligent Flexible Autonomous
Manufacturing Systems (IFAMS 2000) - Towards Rapid Design Exploration and
Optimization, January 10 - 12, 2000.
6. Proceedings of the National Conference on Intelligent Manufacturing Systems
- A Technology Watch, February 6 - 7, 1998
7. Proceedings of AICTE - QIP - STTP Course on Computer Integrated Industrial Systems,
March 15 - 29, 1998 for Engineering College Teachers.
MEMBERSHIP IN PROFESSIONAL BODIES
Life Member in Indian Society for Technical Education, New Delhi
Life Fellow Member in Institution of Engineers (India), Kolkata
Life Fellow Member in Indian Institution of Industrial Engineering, Bombay
Life Member in Computer Society of India.
Life Fellow Member in Indian Institution of Production Engineers, Bangalore.
Life Fellow Member in Operational Research Society of India.
Life Member in Systems Society of India.
19
REVIEWER OF JOURNALS / PROCEEDINGS
Reviewer for International Journal of Quality & Reliability Management, UK.
Reviewer for the Proceedings of the National Conference on Computer Integrated Design
and Manufacturing (NCCIDM), May14-15, 2001, Amrita Institute of Technology and
Science, Coimbatore.
Reviewer for the Proceedings of the International conference on Logistics and Supply
Chain Management in association with Michigan University, USA, August 6-8, PSG
College of Technology, Coimbatore, 2001.
Reviewer for Iranian Journal of Science and Technology.
Reviewer for South African Journal of Industrial Engineering.
Reviewer for TECHNOLOGY Journal, PSG College of Technology.
KEYNOTE ADDRESSES DELIVERD
Delivered a Keynote address on Manufacturing Systems Engineering in National Seminar
on Optimization Techniques In Manufacturing Practice - 2000, 18th March, 2000
sponsored by CII – Coimbatore Chapter and organized by Department of Mechanical
Engineering, Kumaraguru college of Technology, Coimbatore - 600 006.
USA (April / May 2008)
- UMASSD, Dartmouth
Presented the research article entitled, ―Supplier Selection through
Analytical Hierarchy Program and Fuzzy Set Theory‖, April 28th, 2008,
CCB-BIRC.
- Wichita State University
Presented the research article entitled, ―Flexible Parallel Machine
Scheduling‖, Industrial and Manufacturing Engineering Department, May
22nd
, 2008.
Thailand (November 2008)
- Naresuan University, Phitsanulok
Presented a Technical paper, ―Information Technologies for
Knowledge Management: Their Usage and Effectiveness‖.
20
CONFERENCE CHAIRED
Chaired Technical Session in CAD/CAM, Robotics and Factories of Future, PSG College
of Technology, Coimbatore, December 1-3, 1998.
Chaired Technical Session in National Conference on Computer Integrated Design &
Manufacturing (NCCIDM), May 14 - 15, 2001, Amrita Institute of Technology and
Science, Coimbatore
Chaired Technical Session in National Conference in Advanced Computing (NCAC 2003)
at PSG College of Technology, Coimbatore on 02.02.2003.
RESEARCH PUBLICATIONS
INTERNATIONAL JOURNALS
1. B. John; V. Selladurai; Rajesh Ranganathan, ―Machine tool manufacturing a lean Approach‖, 2015, Chennai,Int. J. of Services and Operations Management, 2012 Vol.12, No.4, pp.405 - 430
2. K Mani, V.Selladurai, N Murugan, ―Experimental investigations with eco-friendly refrigerants
using design of experiments technique-mathematical modeling and experimental validation‖ Thermal Science 18 (suppl. 2), 363-374, 2014.
3. P Manimaran, V.Selladurai ―Cat swarm optimization for single stage supply chain distribution
system with fixed charges‖ ICTACT Journal on Soft Computing 4 (2), 2014. 4. P Manimaran, V.Selladurai ―Efficient heuristics for cost optimisation in multi stage supply chain
network with a fixed transportation charge‖ International Journal of Services and Operations Management 18 (2), 115-141, 2014
5. P Manimaran, V.Selladurai ―Particle swarm optimisation for multi stage supply chain network
associated with fixed charges‖ International Journal of Operational Research 21 (1), 100-122, 2014.
6. P Manimaran, V.Selladurai ―Glowworm swarm optimisation algorithm for nonlinear fixed
charge transportation problem in a single stage supply chain network‖ International Journal of Logistics Economics and Globalisation 6 (1), 42-55, 2014
7. C Ramamoorthy, V.Selladurai, R Ranganathan, K Sivasamy, ―Efficiency enhancement of
modern manufacturing industries through the development of Value-added Employees using Value focused thinking approach‖ Faculty of Liberal Arts, Prince of Songkla University, 2014.
8. S Vairam, V.Selladurai Permutation Genetic Algorithm Based Encoding Method for Parallel
Machine Scheduling and Balancing‖ Applied Mechanics and Materials 573, 368-373, 2014. 9. S Vairam, V.Selladurai, ―Parallel Machine Shop Scheduling Using Memetic Algorithm‖Applied
Mechanics and Materials 573, 362-367, 2014. 10. R Elangovan, B Dattaguru, TS Ramamurthy, V.Selladurai ―Development of design charts for
stress intensity factors at tips of multi-site cracks in unstiffened curved panels‖ Engineering Fracture Mechanics 119, 116-123, 2014.
21
11. R. Elangovan, T. S. Ramamurthy,B. Dattaguru & V.Selladurai Analytical Determination of Residual Strength and Linkup Strength for Flat Panels, with Multiple Site Damage ISSN 1319-8025 Arab J Sci Eng DOI 10.1007/s13369-013-0763-2, 2014
12. M Murugan, V.Selladurai, ―Productivity improvement in manufacturing submersible pump
diffuser housing using lean manufacturing system‖ Journal of Engineering Research 2 (1), 2014.
13. D Seenivasan, V.Selladurai, P Senthil, ―Optimization of Moisture condensation rate of Liquid
Desiccant Dehumidifier through Genetic Algorithm‖ Optimization 7 (01), 400-407, 2014. 14. D Seenivasan, V.Selladurai, P Senthil, ―Optimization of liquid desiccant dehumidifier
performance using Taguchi method‖ Advances in Mechanical Engineering 6, 506487, 2014. 15. R Saravanakumar, V.Selladurai, ―Exergy analysis of a domestic refrigerator using eco-friendly
R290/R600a refrigerant mixture as an alternative to R134a‖ Journal of Thermal Analysis and Calorimetry 115 (1), 933-940, 2014.
16. P.Ilamathi, V.Selladurai, K.Balamurugan,‖A Novel approach for odelling of NOx emission
reduction in a tangentially fired boiler‖, International Journal of Oil, Gas Coal Technology, Vol.6, No.4, 2013,pp (449-461).
17. P.Illamathi, V.Selladurai, K.Balamurugan, ― Modelling and Optimization of unburned carbon in
coal fired boiler using ANN and GA‖, ASME Journal of Energy Resources Technology, Vol. 135, No.3, 2013, pp 032201-1 to 032201-4.
18. P.Ilamathi, V.Selladurai, K.Balamurugan, V.T.Sathyanathan,‖ANN-GA approach for Predictive
Modelling and Optimization of NOx emission in a tangentially fired boiler‖, Journal of Clean Technologies and Environmental Policy, Vol.15, No.1, 2013, pp 125-131.
19. K Mani, V.Selladurai, N Murugan, ―Development of Statistical Models for Predicting
Performance of R12, R134a and R290/R600 Mixture Refrigerants using Design of Experiments‖ International Journal of Thermodynamics (IJoT) 16 (1), 43-53, 2013.
20. V Muthukumaran, M Senthil kumar, V.Selladurai ―Improvement of surface properties of AISI
316L SS by oxygen and helium ion implantation‖ Journal of Engineering, Design and Technology 11 (1), 34-43, 2013.
21. S Sundararaj, V.Selladurai ―Flow and Mixing Pattern of Transverse Turbulent Jet in Venturi-Jet
Mixer‖ Arabian Journal for Science and Engineering 38 (12), 3563-3573, 2013. 22. G Kannan, D V.Selladurai, S Karthi ―Swaging process for productivity improvement in the
manufacture of spindles‖ J. Sci. Ind. Res 72, 681-684, 2013. 23. P.Ilamathi, V.Selladurai, K.Balamurugan, ‖Predictive Modelling and Optimization of Power
Plant Nitrogen Oxides Emission‖, International Journal of Artificial Intelligence, Vol.1, No.1, 2012, pp(11-18). 2013.
24. P.Ilamathi, V.Selladurai, K.Balamurugan, ‖ANN – SQP Approach for NOx Emission reduction
in Coal Fired Boilers‖, International Journal of Emerging Electric Power Systems, Vol. 13, No.3, 2012, pp(114)..2012
25. S Sundararaj, V Selladurai ―The effects of arbitrary injection angle and flow conditions on
venturi-jet mixer‖ Thermal Science 16 (1), 207-221.
22
26. C Ramamoorthy, V.Selladurai, R Ranganathan ―Investigation of customer satisfaction in pump
manufacturing Industries through customer feedback approach‖International Journal of Logistics Economics and Globalisation 4 (1-2), 55-75, 2012.
27. K Mani, V.Selladurai ―Enhanced Performance of Environmentally Friendly Refrigerant Mixture
with and without Magnetic Field Effect‖Journal of Enhanced Heat Transfer 19 (4), 2012. 28. C Ramamoorthy, V.Selladurai, R Ranganathan ―Experimental Cost Reduction in Pump
Manufacturing Industries Through Software Based Mechatronics System‖ Procedia Engineering 38, 1665-1674, 2012.
29. J Maniraj, V.Selladurai, N Sivashanmugam, S Arungalai Vendan, ―Hard finish turning
parameters optimization for machining of high temperature stainless steel‖ HighTemp. Mater. Proc, 2012.
30. J Maniraj, V.Selladurai, N Sivashanmugam, SA Vendan, J Mathew Experimental Investigation
on Effect of Tool Crater Wear and Surface Roughness in TiN Coated WC Tool While Machining Martensitic Stainless Steel ‖ High Temperature Materials and Processes 30 (3), 257-265, 2011.
31. K Kumar, V.Selladurai, DK Raja, DK ELANGOVAN ―Ant Colony Approach for Makespan
Minimization on Unrelated Parallel Machines‖ International Journal of Engineering Science 3 (4), 3113-3120, 2011.
32. KM Senthilkumar, V.Selladurai, K Raja, V Thirunavukkarasu ―A hybrid algorithm based on pso
and aco Approach for solving combinatorial fuzzy unrelated parallel machine scheduling problem ‖European Journal of Scientific Research 64 (2), 293-313, 2011.
33. C Ramamoorthy, V.Selladurai, R Ranganathan ―Experimental cost reduction in Modern Manufacturing Industries through Software based Mechatronics System:An overview ‖International Journal of Scientific and Engineering Research 2 (6), 320-328, 2011.
34. A Sivasamy, PR Kanna, V.Selladurai, ―Jet impingement cooling of a horizontal surface in an
unconfined porous medium: Mixed convection regime‖ International Journal of Heat and Mass Transfer 54 (17), 4127-4134, 2011.
35. M Murugan, V.Selladurai, ―Formation of machine cells/part families in cellular manufacturing
systems using an ART-modified single linkage Clustering approach—a comparative study‖ Jordan J Mech Ind Eng 5 (3), 199-212, 2011.
36. P.Manimaran, V.Selladurai, R.Rajesh, ―A Simple heuristics for optimization of unbalanced
multistage supply chai Logistics associated with fixed charges‖, International Journal of Procurement Management, Vol. No. 2010.
37. P.Manimaran, V.Selladurai, R.Rajesh, G.Sasikumar, ‖Genetic Algorithm for Optimization of
distribution system in A single stage supply chain network with fixed charges‖, International Journal of Industrial and Systems Engineering, Vol. No. 2010.
38. P.Manimaran, V.Selladurai, W.C.Yeh, M.Sivakumar,‖ Particle Swarm Optimization for fixed-charge Transportation problem in a Multistage Supply Chain Network‖, International Journal of Logistics Systems and Management, Vol. No. 2010.
39. C Ramamoorthy, V.Selladurai, R Ranganathan ―Identification of Product Wastages through
Lean Techniques in Modern Manufacturing Industries: A Case Study‖ Software Engineering and Technology 2 (8), 176-183, 2010.
23
40. V Muthukumaran, V.Selladurai, A Reghuraj, M Senthilkumar ―Experimental Evaluation of
Corrosion and Hardness on AISI 316l Stainless Steel Implanted with Nitrogen and Argon Ions‖ Acta Mechanica Slovaca 14 (1), 80-87, 2010.
41. S Nandhakumar, V.Selladurai, R Dhanasekaran Haarwavelet approach to singular system
time invariant model robot arm control problem‖ Communication Control and Computing Technologies (ICCCCT), 2010 IEEE.
42. S Nandhakumar, V.Selladurai, V Muthukumaran, S Sekar Haar wavelet approach to time varying model robot arm control problem. International Journal of Academic Research 2 (4), 2010.
43. S Sundararaj, V.Selladurai ―Numerical and experimental study on jet trajectories and mixing
behavior of venturi-jet mixer‖ Journal of Fluids Engineering 132 (10), 101104, 2010. 44. S Gnanasekaran, S Velappan, P Manimaran ―An integrated model for supplier selection using
fuzzy analytical hierarchy process: a steel plant case study‖ 2010. 45. A Sivasamy, V.Selladurai, PR Kanna ―Jet impingement cooling of a constant heat flux
horizontal surface in a confined porous medium: mixed convection regime‖International Journal of Heat and Mass Transfer 53 (25), 5847-5855, 2010.
46. A Sivasamy, V.Selladurai, PR Kanna ―Mixed convection on jet impingement cooling of a
constant heat flux horizontal porous layer‖ International Journal of Thermal Sciences 49 (7), 1238-1246, 2010.
47. V Muthukumaran, V.Selladurai, S Nandhakumar, M Senthilkumar ―Experimental investigation
on corrosion and hardness of ion implanted AISI 316L stainless steel‖ Materials & Design 31 (6), 2813-2817, 2010.
48. V Muthukumaran, V.Selladurai, S Nandhakumar, M Senthilkumar ―Corrosion and Hardness
Behaviour of AISI 316L SS Implanted with Argon and Oxygen Ions‖, 2009. 49. P.Sathyabalan, V.Selladurai, P.Sakthivel, ―ANN based Prediction of effect of Reinforcement on
Abrasive Wear loss and Hardness in a Hybrid MMC‖. American Journal of Engineering and Applied Sciences, Vol. 2(1), 2009, pp. 50-53.
50. B. Ganesh Babu, V.Selladurai, V.Saravannan, ―Stability Analysis of End milling AlSiC Metal
matrix composite Materials using Finite Element Analysis in Time (FEAT)‖. International Journal of Manufacturing Sciences and Production, 2009.
51. K.P.Arulshri, K.P.Padmanaban, V.Selladurai, ―Constitute modeling of shape memory alloy
using Artificial Neural Network‖. Journal of Manufacturing, Vol.1, No. VIII, 2009, pp. 61-65. 52. KV Rao, V.Selladurai, R Saravanan, ―TRIZ Tool for Optimization of Airport Runway‖ Growth
and Development of Computer-Aided Innovation, 80-88, 2009.
53. S Nandhakumar, H Ganesan, V.Selladurai, GM Kumar ―An Error Minimization In Industrial Robot Arm Performance Using Haar Wavelet Series‖ Automation and Autonomous System 1 (2), 53-58, 2009.
54. A Šalak, K Vasilko, M Selecká, J Audy, A Gessner, D Kottfer, I Maňková, V.Selladurai,
―Machinability of sintered steels in face turning: effect of cutting speed and tool grade‖ Manufacturing Engineering/Výrobné imžinierstvo 8, 1, 2009.
24
55. MS Narmadha, V.Selladurai, ―Multi-factory, Multi-Product Inventory Optimization using Genetic
Algorithm for Efficient Supply Chain Management‖ IJCSNS 9 (12), 203, 2009. 56. S Narmadha, V.Selladurai, G Sathish, ―An Inventory Optimization Tool using Uniform
Crossover Genetic Algorithm for Multi-factory‖, Multi-product Supply Chain International Journal of Computer Science and Security 4 (1), 62, 2009.
57. S Nandhakumar, V.Selladurai, S Sekar ―Numerical investigation of an industrial robot arm
control problem using Haar wavelet series‖ American Journal of Engineering and Applied Sciences 2 (4), 2009.
58. S Gnanasekaran, S Velappan, S Ayappan, ―An integrated model for supplier selection: an automobile industry case study‖ International Journal of Services and Operations Management 6 (1), 89-105, 2009.
59. K.Raja, C.Arumugam and V.Selladurai, "Non-identical parallel machine scheduling using
Genetic Algorithm and Fuzzy Logic approach", International Journal of Services and Operations Management, Vol. 4, No. 1, 2008, pp. 72-101.
60. G.Sasikumar, V.Selladurai and A.Sivasangari, ―Development of Supplier Selection System by combining Analytic Hierarchy Process and Gray Relational Analysis: An Automobile Industry case study‖, The ICFAI University Journal of Supplier Chain Management, Vol. 5, No. 4, 2008,pp. 82-94.
61. R.Sivaprakasam and V.Selladurai, ―A memtic algorithm for minimizing exceptional elements in cell formation‖. Asian Journal of Scientific Research, Vol.1, No. 2, 2008, pp. 138-145.
62. M.Murugan and V.Selladurai, ―Improving Productivity in Manufacturing ‗S‘ Cam Shafts using Implementation of Lean Manufacturing Systems‖. International Journal of Manufacturing Sciences and Production, Vol. 9, No. 3-4, 2008, pp. 119-144.
63. K.Mani and V.Selladurai, ―Energy Savings with the effect of Magnetic field using R290/600a mixture as substitutes for CFC12 and HFC134a‖, International Journal of Thermal Science, Vol. 12 (2008), No. 3, pp. 111- 120.
64. B.Ganesh Babu and V.Selladurai,‖ Sensitivity analysis of the mathematical models of cutting force parameters, tool flank wear and surface roughness of end milling Al-SiC metal matrix composite material‖, Journal of Manufacturing Engineering, No. 4, Vol. 7, 2008, pp. 35-38.
65. R.Amuthakannan, SM.Kannan, V.Selladurai, and A.Vijayalakshmi, ―Software Quality measurement and improvement for real time system using Quality Tools and Techniques‖, International Journal of Industrial and Systems Engineering, Vol. 3, No. 1, 2008, pp. 229-256.
66. K.Mani and V.Selladurai, ―Energy Savings with the effect of Magnetic field using R290/600a mixture as substitutes for CFC12 and HFC134a‖, International Journal of Thermal Science, Vol. 12 (2008), No. 3, pp. 111-120.
67. S Sundararaj, V.Selladurai ―An Analysis on the Proportional Mixing of Liquids using Venturi Jet Mixer‖ International Journal of Applied Engineering Research 3 (7), 2008.
68. M Murugan, V.Selladurai ―Improving Productivity in Manufacturing ‗S‘Cam Shafts Using Implementation of Lean Manufacturing System‖ Journal for Manufacturing Science and Production 9 (3-4), 119-144, 2008.
25
69. K Elangovan, V.Selladurai, SR Devadasan, R Murugesh ―Maintenance quality objectives development methodology and its executive support system‖ International Journal of Management Practice 3 (2), 179-201, 2008.
70. M Murugan, V.Selladurai ―Reverse Engineering on Port Cores of a Cylinder Head Using Digitizing Technique‖ Journal for Manufacturing Science and Production 9 (1-2), 33-44, 2008.
71. K Elangovan, V.Selladurai, SR Devadasan, S Thirumurugaveerakumar, ―Executive support for developing maintenance quality mission statement‖ International Journal of Services and Operations Management 4 (5), 580-603, 2008.
72. B Ganeshbabu, V.Selladurai, R Shanmugam ―Analytical modeling of cutting forces of end milling operation on aluminum silicon carbide particulate metal matrix composite material using response surface methodology‖ ARPN Journal of Engineering and Applied Sciences 3 (2), 5-18, 2008.
73. M Sedighizadeh, A Rezazadeh, P Margo, S Sundararaj, V.Selladurai, ―Nonlinear model identification and PI control of wind turbine using neural network adaptive frame wavelets‖ International Journal of Applied Engineering Research 3 (7), 861-877, 2008.
74. S Venkatachalam, C Arumugam, K Raja, V.Selladurai, ―Quality function deployment in agile parallel machine scheduling through neural network technique‖ Asian J. Scientific Research 1 (2), 146-152, 2008.
75. K Balamurugan, V.Selladurai, B Ilamathi, ―Manufacturing facilities layout design using Genetic Algorithm‖ International Journal of Manufacturing Technology and Management , 2008, 14 (3-4)
76. K Raja, V.Selladurai, R Saravanan, C Arumugam, ―Earliness—tardiness scheduling on uniform parallel machines using simulated annealing and fuzzy logic approach‖Proceedings of the Institution of Mechanical Engineers, Part B: Journal of , 2008.
77. P Thangavel, V.Selladurai, An experimental investigation on the effect of turning parameters on surface roughness‖ International journal of manufacturing research, 2008,No: 3 (3), 285-300.
78. K Mani, V.Selladurai, ―Experimental analysis of a new refrigerant mixture as drop-in replacement for CFC12 and HFC134a‖ , 2008, International journal of thermal sciences 47 (11), 1490-1495. 2008.
79. K.Mani and V.Selladurai, ―Experimental Studies on the effect of Magnetic field in energy consumption using R134a, LPG and LPG/R134a mixture as a substitutes for CFC12 Systems‖, International Journal of Applied Engineering Research, Vol. 2, No. 3, 2007, pp. 411-420,2007.
80. K.Raja, V.Selladurai and R.Saravannan, ―Simulated Annealing Approach for minimizing Makespan in Flexible Parallel Machines‖, Caledonian Journal of Engineering, Vol. 3, No. 2, 2007, pp. 35-41.2007.
81. R.Sivaprakasam and V.Selladurai, ―A Genetic Algorithm Approach for minimizing exceptional elements in cell formation‖. Journal on Future Engineering and Technology, Vol. 3, No. 1, 2007, pp. 16-19.2007.
82. Optimal Job Shop Scheduling Performance Enhancement Through Computer Based Simulated
Annealing TechniquePV Senthiil, V.Selladurai Journal for Manufacturing Science and Production 8 (2-4), 169-180,2007.
83. PV Senthiil, V.Selladurai, R Rajesh, ―Parallel machine scheduling (PMS) in manufacturing systems using the ant colonies optimization algorithmic rule‖ 2007, Journal of Applied Sciences 7, 208-213,2007.
26
84. PV Senthiil, V.Selladurai, ―Job Shop Scheduling with Tabu Deep Memory Search Using Plug-in Computer Simulation‖ Manufacturing Engineering/ Vyrobne Inzinierstvo, 2007, No: 6 (3), 36-44,2007.
85. K Raja, V.Selladurai, R Saravanan, ―A genetic approach for scheduling independent jobs on uniform parallel machines‖ Manufacturing Engineering/ Vyrobne Inzinierstvo, 2007, No: 6 (4), 12-15,2007.
86. R Sudhakaran, V.Selladurai, T Kannan, PS Sivasakthivel ―Analysis of Heat pipe Heat
Exchanger (HPHE) for Waste Heat Recovery From an Air Conditioning System‖ i- Manager's Journal on Future Engineering and Technology , 2007, No: 2 (3), 86,2007.
87. T Alwarsamy, P Thangavel, V.Selladurai, ―Reduction of machining vibration by use of rubber layered laminates between tool holder and insert‖ Machining science and technology, 2007,No: 11 (1), 135-143,2007.
88. S Venkatachalam, C Arumugam, K Raja, V.Selladurai, ―Quality Function Deployment in Agile Parallel Machine Scheduling Using Simulated Annealing Approach‖ i- Manager's Journal on Future Engineering and Technology 2 (4), 32, 2007.
89. R Sivaprakasam, V.Selladurai, P Sasikumar, ―Implementation of interpretive structural
modelling methodology as a strategic decision making tool in a Green Supply Chain Context‖Annals of Operations Research, 1-26, 2007,
90. JD Rathnaraj, TMN Kumar, Y Khadraoui, AIN Korti, A Seddini, A Terfous, V.Selladurai ―Studies on Variable Swril Intake System for DI Diesel Engine Using CFD‖ ...International Journal of Applied Engineering Research 2 (3), 2007,
91. PV Senthiil, V.Selladurai, R Rajesh, ―Parallel machine scheduling (PMS) in manufacturing systems using the ant colonies optimization algorithmic rule‖Journal of Applied Sciences 7, 208-213, 2007,
92. M Murugan, V.Selladurai, ―Manufacturing cell design with reduction in setup time through genetic algorithm‖ Asian Research Publication Network, 2007.
93. M Murugan, V.Selladurai, ―Scheduling Flow Line Manufacturing Cell through Multi Objective Memetic Algorithm‖ 2007,
94. C Arumugam, K Raja, V.Selladurai, ―Agility in two-stage hybrid flow shop parallel machine
scheduling through simulated annealing‖ International Journal of Services and Operations Management 3 (3), 332-354, 2007.
95. KU Kameshwaran, C Venkatesh, SP Arul, V.Selladurai, ―Material modeling of shape memory alloy using artificial neural networks‖ 2007.
96. PS Velmurugan, VP Eswaramurthy, V.Selladurai, A Tamilarasi, ―Scheduling of Flexible Manufacturing System using Tabu Search Technique‖, 2007,
97. PS Velmurugan, V.Selladurai, ―A Tabu Search algorithm for job shop scheduling problem with industrial scheduling case study‖ International Journal of Soft Computing 2 (4), 531-53, 2007.
98. A Sivasamy, V.Selladurai, P Rajesh Kanna, ―Numerical simulation of two‐dimensional laminar
slot‐jet impingement flows confined by a parallel wall‖ International Journal for Numerical
Methods in Fluids, 2007, No: 55 (10), 965-983,2007.
27
99. S Rajakumar, VP Arunachalam, V.Selladurai, ―Workflow balancing in parallel machines through genetic algorithm‖ The International Journal of Advanced Manufacturing Technology, 2007, 33 (11-12 ...2007.
100. M Murugan, V.Selladurai, ―Optimization and implementation of cellular manufacturing system in a pump industry using three cell formation algorithms‖The International Journal of Advanced Manufacturing Technology , 2007: No:35 (1-2), 135-149,2007.
101. M Murugan, V.Selladurai, PV Senthiil. ―An Integrated ART-MOD-SLC Approach for Solving Part Family/Cell Formation Problem in Cellular Manufacturing‖ 2007.
102. S.P.Arul, K.Saravanan and V.Selladurai, ―Optimization of Bio Medical Stent Using Finite Element Method‖, International Journal of Plastic Element, 2006.
103. S.P.Arul, K.Saravanan, V.Selladurai and J.B.Joshi, ―Investigations on one dimensional constitutive model for shape Memory Alloy‖, Canadian Journal of Chemical Engineering, 2006.
104. P.Thangavel, V. Selladurai and R.Shanmugam, ―Sensitivity Analysis of Tool Flank wear model of Turning Process‖, Journal of Manufacturing Engineering, Vol. 5, No. 4, 2006, pp. 16-21.2006.
105. N.Mohan Das Gandhi, V.Selladurai and P.Shanthi, ―Computer Integration using the Mckinsey‘s
7S model as an underlying frame work: A case in the Foundry‖, International Journal of Information Technology and Management, Vol. 5, No. 2/3, 2006, pp. 175-196.2006.
106. K.Elangovan, V.Selladurai and S.R.Devadasan, ―Maintenance Quality Policy Statement: It‘s Research, Design and Executive Support System‖, International Journal of Technology, Policy and Management, Vol. 6, No. 3, 2006, pp. 237-255.2006.
107. K.Elangovan, V.Selladurai, S.R.Devadasan, S.K.Goyal and S.Muthu, ―Quality and Productivity improvement by executive decisions in Maintenance Engineering: ESS based approach‖, International Journal of Productivity and Quality Management, Vol. 2, No. 4, 2006, pp. 112-139.2006.
108. S Gnanasekaran, V.Selladurai, ―Analytic Hierarchy Process as a Decision Support System in Automobile Industry‖ Manufacturing Engineering/ Vyrobne Inzinierstvo, 2006, No: 5 (3), 41-45, 2006.
109. Elangovan, V.Selladurai, SR Devadasan, ―Achieving core maintenance qualitycompetencies
through profiling: theorisation and ESS development‖ International Journal of Process Management and Benchmarking, 2006, 1 (4), 332-351,2006.
110. K Raja, C Arumugam, V.Selladurai, KMS Kumar, ―Non-identical Parallel Machine Scheduling Using Simulated Annealing Technique‖ i-Manager's Journal on Future Engineering and Technology, 2006, 2 (1), 14,2006.
111. K Raja, R Saravanan, V.Selladurai, ―Multi-objective Optimization of Parallel Machine Scheduling(PMS) using Genetic Algorithm and Fuzzy Logic Approach‖ Journal of the Institution of Engineers(India) Part PR, Production, 2006.
112. N Mohan Das Gandhi, V.Selladurai, P Santhi, ―Computer integration using the McKinsey's 7S model as an underlying framework: a case study in the foundry‖ International journal of information technology and management , 2006, No:5 (2-3), 175-196,2006.
113. Sustainable Growth Through Green Productivity: A Case Study of Cast Iron Foundry N Gandhi, M Das, V.Selladurai Indian Foundry Journal, 2006, No: 52 (2), 32-37,2006.D
28
114. Vasudevan, V.Selladurai, ―Average outgoing quality limit and lot tolerance percent defective indexed acceptance sampling plans using artificial neural networks ‖International Journal of Productivity and Quality Management 1 (4), 411-424,2006.
115. K Elangovan, V.Selladurai, SR Devadasan, Maintenance quality policy statement: its research, design and executive support system‖ International Journal of Technology, Policy and Management, 2006, 6 (3), 237-255,2006.
116. K Balamurugan, V.Selladurai, B Ilamathi ―Design and optimization of manufacturing facilities
layouts‖ Proceedings of the Institution of Mechanical Engineers, Part B: Journal of, 2006.
117. K Balamurugan, V.Selladurai, B Ilamathi, ―Solving unequal area facility layout problems using genetic algorithm‖ International Journal of Logistics Systems and Management, 2006, No: 2 (3), 281-301,2006.
118. S Gnanasekaran, S Velappan, P Manimaran, ―Application of analytical hierarchy process in supplier selection: an automobile industry case study‖ South Asian Journal of Management, 2006, No:13 (4), 89,2006.
119. P Thangavel, V.Selladurai, R Shanmugam, ―Application of response surface methodology for predicting flank wear in turning operation‖ Proceedings of the Institution of Mechanical Engineers, Part B, : Journal of, 2006.
120. S Rajakumar, VP Arunachalam, V.Selladurai, ―Workflow balancing in parallel machine scheduling with precedence constraints using genetic algorithm‖ Journal of Manufacturing Technology Management 17 (2), 239-254, 2006.
121. N Mohan Das Gandhi, V.Selladurai, P Santhi ―Green productivity indexing: a practical step towards integrating environmental protection into corporate performance‖International Journal of Productivity and Performance Management 55 (7), 594-606, 2006.
122. N Mohan Das Gandhi, V.Selladurai, P Santhi, Unsustainable development to sustainable development: a conceptual model‖ Management of environmental quality: an international journal 17 (6), 654-672, 2006.
123. K.Balamurugan, B.Ilamathi and V.Selladurai, ―Fuzzy expert system for wire EDM process control‖, Journal of Manufacturing Engineering, Vol. 2, No. 5, 2005, pp. 7-9.2005
124. K.Balamurugan, V.Selladurai and B.Ilamathi, ―Optimization of Machine Layout problems‖, Journal of Manufacturing Engineering, Vol. 4, No. 4, 2005, pp. 41-44.2005.
125. S. Rajakumar, V.P.Arunachalam and V.Selladurai, ―Simulation of workflow balancing in assembly shop floor operations‖, International Journal of Manufacturing Technologymanagement,2005, Vol. 16, No. 3, pp. 265-281,2005.
126. D.Vasudevan, V.Selladurai and P.Nagaraj, ―Determination of closed from solutions for acceptance sampling‖, International Journal of Quality Assurance, Good Practice, Regulation and Law, Vol. 11, No. 1, 2004, pp. 43-61.2004.
127. N.Rajam Ramasamy and V.Selladurai, ―Fuzzy logic approach to prioritize engineering characteristics in quality function deployment (FL-QFD)‖, International Journal of Quality and Reliability Management, Vol. 21, No. 9, 2004, pp. 1012-1023.2004.
29
128. P Manimaran, V.Selladurai, ―A Simulated Annealing Methodology for Multi-Stage Logistics in Supply Chain Network‖ GCMM 2004: 1st International Conference on Manufacturing and Management, 351, 2004.
129. S Rajakumar, VP Arunachalam, V.Selladurai, ―Workflow balancing strategies in parallel machine scheduling‖ The International Journal of Advanced Manufacturing Technology 23 (5-6), 366-374, 2004.
130. S.P.Arul, T.S.Kulandaisamy and V.Selladurai, ―Thermo mechanical response of shape memory wire nitinol): constitutive modeling, finite element implementation and numerical simulation‖, Proceedings of SPIE- Vol. 5062, Smart Materials, Structures and Systems, 2003, pp. 922-927.2003.
131. R.SivaSubramanian, V.Selladurai and A.Gunasekaran, ―Optimum Production Schedule and Profit Maximization using the concept: Theory of Constraints‖, International Journal of Manufacturing Technology Management, Vol. 5, No. 4, 2003, pp. 325-337.2003.
132. R.SivaSubramanian, V.Selladurai and A.Gunasekaran, ―Utilization of Bottle-neck Resources for Profitability through Synchronized operation of Marketing and Manufacturing‖, International Journal of Integrated Manufacturing Systems, Vol. 14, No. 3, 2003, pp. 238-246,2003.
133. P Nagaraj, V.Selladurai, ―Function approximation of total system cost for a continuous
manufacturing system: A case study‖ International Journal of Operations & Production Management 23 (4), 430-439, 2003,
134. SP Arul, V.Selladurai, ―Thermomechanical response of shape memory wire (nitinol): constitutive modeling, finite element implementation, and numerical simulation‖ Smart Materials, Structures, and Systems, 922-927, 2003.
135. N.Rajam Ramasamy, V.Selladurai and A.Gunasekaran, ―Just-In-Time Implementation in Small and Medium Industries‖, International Journal of Work Study, Vol. 51, No. 2, 2002, pp. 85-90,2002.
136. P.Nagaraj and V.Selladurai, ―Analysis of optimum batch size in Multi-stage, Multi-facility and Multi-product Manufacturing systems‖, International Journal of Advanced Manufacturing Technology. Vol. 19, No. 2, 2002, pp. 117 - 124.
137. SR Devadasan, M Ramesh, V Senthil, V.Selladurai, ―Reengineering Quality Systems Through Information Technology‖ Recent Developments in Operational Research, 99, 2002.
138. V.Senthil, S.R.Devadasan, V.Selladurai and R.Baladhandayutham, ―Integration of BPR and TQM; past, present and future trends‖, International Journal of Production Planning and Control, Vol. 12, No. 7, 2001, pp. 680 – 688,2001.
139. PV Senthiil, V.Selladurai, ―Supply chain management with parallel machines shop floor environment of job shops‖ 2001, Logistics and Supply Chain Management, 130,2001.
140. R Sivasubramanian, V.Selladurai, N Rajamramasamy, ―The effect of the drum-buffer-rope (DBR) approach on the performance of a synchronous manufacturing system (SMS)‖ Production Planning & Control, 2000, 11 (8), 820-824,2000.
141. V.Selladurai, P.Aravindan and R.Satheesan, ―Development of computer simulator for dynamic scheduling of FMS to achieve optimal scheduling‖, International Journal of Advanced Manufacturing Technology, Vol. 12, No. 2, 1996, pp. 145-152.
30
142. P.Aravindan, S.R.Devadasan and V.Selladurai, ―A Forced Model for Strategic Quality Management‖, International Journal of Quality and Reliability Management, Vol. 13, No. 8, 1996, pp. 79-96.
143. P.Aravindan, S.R.Devadasan, E.Narashima Reddy and V.Selladurai, ―Experts system for implementation for successful Quality Circle Programs in Manufacturing Firms‖, International Journal of Quality and Reliability Management, Vol. 13, No. 7, 1996, pp. 57-68.
144. P.Aravidan, S.R.Devadasan and V.Selladurai, ―Continuous Quality Improvement through Taguchi‘s Online Quality Control Methods‖, International Journal of Operations and Production Management, Vol. 15, No. 7, 1995, pp. 60-77.
145. V.Selladurai, P.Aravindan, S.G.Ponnambalam and A.Gunasekaran, ―Dynamic simulation of
scheduling of job shop manufacturing system‖, International Journal of Operations and Productions Management, Vol. 15, No. 7, 1995, pp. 106-119.
146. V.Selladurai, P Aravindan, ―Industrial capacity planning through dynamic simulation for higher productivity-industrial dynamics approach‖ System dynamics for management support, 219, 1993.
NATIONAL JOURNALS
1. S.P.Arul, V.Selladurai and P.Balasubramanian, ―Computer Simulation of Bio-Medical Stent using finite element Method‖, ACCST Research Journal, Vol. IV, No. 1, 2006.
2. K.Raja, R.Saravanan and V.Selladurai, ―Optimization of Parallel Machine Scheduling (PMS)
using Intelligent Techniques‖, Journal of Manufacturing Technology Today, Vol. 5, No. 1, 2006, pp. 12-15.
3. N.Mohan Das Gandhi, V.Selladurai and P.Santhi,‖ Continuous Improvement: Kaizen for
minimization‖ Journal of Manufacturing Technology Today, Vol. 5, No. 4, 2006, pp. 24-28.
4. N.Mohan Das Gandhi and V. Selladurai, ―Sustainable Development through Green Productivity: A case study of Cast Iron Foundry‖, Indian Foundry Journal, Vol. 52, No. 2, 2006, pp. 32-37.
5. P.Thangavel and V.Selladurai, ―Tool flank wear measurement using BPN‖, Journal of
Manufacturing Technology Today, Vol. 5, No. 8, 2006, pp. 11-16.
6. K.Raja, R.Saravanan and V.Selladurai, ―Multi-objective Optimization of Parallel Machine Scheduling (PMS) using Genetic Algorithm and Fuzzy Logic Approach‖ Institution of Engineers (India), Production Engineering Journal, Vol. 87, 2006, pp. 25-30.
7. K.Raja, C.Arumugam, V.Selladurai and V.M.Senthil Kumar, "Non-identical parallel machine
scheduling using Simulated Annealing Technique", Journal on Engineering and Technology, Vol. 2, No. 1, 2006.
8. P.Senthil Velmurugan and V.Selladurai, ―Optimization - Inspiration from Ant Behaviour‖, ACCST
Research Journal, Vol. III, No. 2, April 2005.
9. K.Balamurugan, V.Selladurai and B.Ilamathi, ―Application of simulation and genetic algorithm for facility layout design‖, National Journal of Manufacturing Technology and Management of Indian Institution of Production Engineers, Vol. 2, No. 1, 2005, pp. 3-7.
10. N.Rajam Ramasamy and V.Selladurai, ―An analysis of imparting CPI (Continuous Process
Improvement) in SMEs, Journal of Industrial Engineering, Vol. XXXIV, No. 5, 2005.
31
11. N.Mohan Das Gandhi, V.Selladurai and P.Santhi, ―Technological inputs for improving productivity in the CI foundry: Finite element simulation strategies, ―Journal of Manufacturing Technology Today, Vol. 4, Issue 8, 2005, pp. 3-6.
12. K.Balamurugan, V.Selladurai and B.Ilamathi, ―Solving faculty layout problems using Excel and
GA‖, Indian Journal of Information Science and Technology, Vol. 1, No. 1, Nov. 2005, pp. 43-52.
13. D.Vasudevan, V.Selladurai and P.Nagaraj, ―Sampling plans for controlling AQL using ANN‖, Industrial Engineering Journal, Vol. XXXIV, No. 9, 2005, pp. 29-32.
14. B. Ilamathi, K.Balamurugan and V.Selladurai, ―Optimization of Multiobjective multi pass Turning
operations using GA‖, Journal of Manufacturing Technology, Vol. 1, 2005, pp. 15-20.
15. T.Alwarsamy, V. Selladurai, P.Thangavel, M.Murugan and A.Gupta Das, ―Improvement of Dynamic behavior of boring tools using load Damper and impact Damper‖, Journal of Manufacturing Technology Today, Vol. 4, No.11, 2005.
16. D.Vasudevan, V.Selladurai and P.Nagaraj, ―Simultaneous Control of AOQL and LTPD by
sampling plans using ANN‖, PARITANTRA, A Journal of Systems Science and Engineering, Systems Society of India, Vol. 9, No.1, 2004, pp. 16-23.
17. P.V.Senthil, V.Selladurai and R.Rajesh, ―Parallel Machine Scheduling (PMS) in Manufacturing
Systems using the ANT colonies optimization algorithmic rule‖, PARITANTRA, A Journal of systems Science and Engineering, Systems Society of India, Vol. 9, No.1, 2004, pp. 43-50.
18. R.Prakasam, S.Dhandapani and V.Selladurai, ―Optimization of humidification system in spinning
mills‖, The Indian Textile Journal, Vol. XXX, No. 9, 2003, pp. 27-36.
19. P.Nagaraj and V.Selladurai, ―Lot sizing for a Multi Product - Multistage manufacturing system by Fuzzy Logic‖, Journal of Industrial Engineering, Indian Institution of Industrial Engineering, MUMBAI, Vol. XXXI, No. 11, 2002, pp. 26-29.
20. R.Subramanian and V.Selladurai, ―Performance improvement behavior of a small scale
enterprises‖, Journal of Industrial Engineering, Indian Institution of Industrial Engineering, Vol. XXX No. 10, 2001, pp. 24-33.
21. R.Sivasubramanian, V.Selladurai and N.Rajam Ramaswamy, ―Drum-Buffer-Rope (DBR)
Approach and its effect on the Performance of Synchronous Manufacturing System (SMS)‖ Journal of Industrial Engineering, Indian Institution of Industrial Engineering, Vol. XXIX, No. 6, 2000, pp. 18-23.
22. V.Selladurai, P.Aravindan and R.Parthasarathi, ―Manufacturing lead time reduction through
stabilized sequence planning system,‖ Technology Journal of PSG Tech, 1994, pp. 31-35.
23. V.Selladurai, P.Aravindan, K.Thirumaran and T.Govindaraj, ―The importance of Entrepreneurial Technology Programme in Technical education‖, Technology Journal of PSG TECH, 1993, pp. 28-31.
24. V.Selladurai and P.Aravindan, ―Dynamic Analysis of Industrial System through Computer
Simulation‖, Technology Journal of PSG TECH, 1992, pp. 23-37.
25. P.Aravindan and V.Selladurai, ―Analysis of queuing delay in data transmission in production systems as per MAP‖, OPSEARCH, Journal by ORSI, Mar 1992, Vol. 29, No. 1, pp. 34-35.
32
CONFERENCE PROCEEDINGS
1. N.Murugan and V.Selladurai, ―Productivity Improvement in Manufacturing Submersible pump diffuser housing using Lean Manufacturing System‖, 24
th National Convention of Production
Engineers, Institutions of Engineers (India) Thrissur Center, May 15-16, 2009. 2. P.V.Senthiil and V.Selladurai, ―Information technologies for knowledge management: their
usage and effectiveness‖, International Conference in Business Management and Information Sciences, November 5-7, 2008, Naresuan University, Phitsanulok, Thailand.
3. P.V.Senthiil and V.Selladurai, ―Customer based production system sequence planning with
simulation modeling‖, International Conference in Business Management and Information Sciences, November 5-7, 2008 Naresuan University, Phitsanulok, Thailand.
4. M.Murugan and V.Selladurai, ―Art cell formation using modified single linkage clustering
approach in cellular manufacturing‖, International Conference ISCO-2008, Karpagam College Engineering, Coimbatore.
5. M.Murugan and V.Selladurai, ―Integrated ART-MOD-SLC approach for solving part family/cell
formation problem in cellular manufacturing – Comparative study‖. International Conference ISCO-2008, Karpagam College Engineering, Coimbatore.
6. S.Narmadha, G.Sathish and V.Selladurai, ―Extraction of Views and Perspectives to Develop an
Framework for Enterprise Modeling‖, International Conference on Total Engineering, Analysis and Manufacturing Technologies, Indian Institute of Science (IISc), Bangalore, India, September 22 – 24, 2008.
7. V. Selladurai, P.V.Senthiil and G.Balamurugan, ―Proto type development of involute impeller
pump casing with optimization‖, International Conference on Digital Factory (ICDF-2008), Coimbatore Institute of Technology, Coimbatore, August 11 - 13, 2008, Vol.II, p. 1438.
8. S.Narmadha, V.Selladurai and G.Sathish ―Data Mining in aspect of Manufacturing Enterprise -
A Review‖, International Conference on Total Engineering, Analysis and Manufacturing Technologies, Indian Institute of Science (IISc), Bangalore, India, October 4 - 6, 2007, p. 43.
9. S.Narmadha, V.Selladurai, Vignesh.G and Vishwanath Shankar, ―Intelligent Support Tools
Enhancing Decision Making‖, International Conference on Total Engineering, Analysis & Manufacturing Technologies, Indian Institute of Science (IISc), Bangalore, India, October 4 - 6, 2007, p. 44.
10. K.Mani and V.Selladurai, ―Simulation studies on vapour compression refrigeration system
using LPG as eco-friendly refrigerants‖, Proceedings of the International Conference on Modelling and Simulation (CITICOMS 2007), Coimbatore Institute of Technology, Coimbatore, August 27 - 29, 2007, Vol. II, p.30.
11. K.Raja, R.Sathishkumar, N.A.Prabu and V.Selladurai, ―An evolutionary Algorithm for unrelated
parallel machine scheduling‖, Proceedings of the International Conference on Modelling and Simulation (CITICOMS 2007), Coimbatore Institute of Technology, Coimbatore, August 27 - 29, 2007, Vol. II, p.45.
33
12. S.Kumaravadivelan, S.P.Arul, and V.Selladurai, ―Modeling and Analysis of 3DSMA Stent‖ 21
st AIMTDR – All India Manufacturing Technology, Design and Research Conference, Vellore
Institute of Technology, Vellore, July 2006. 13. G.Sasikumar, V.Selladurai and K.Thirunavukkarasu, ―Application of Analytic Hierarchy Process
in Supplier Selection: An Automobile Industry Case Study‖, International Conference on Global Manufacturing Innovations – GMI 2006, Coimbatore Institute of Technology, Coimbatore, India, July 27-29, 2006.
14. M.Murugan, R.Sivaprakasam and V.Selladurai, ‗Scheduling N jobs M machines machine shop
using Ant Colony Optimization‘. National Conference OPTEST – 2006, Bannari Amman Institute of Technology, Sathyamangalam.
15. M.Murugan, R.Sivaprakasam and V.Selladurai, ―Cell formation with Reduction in setup Time
through Genetic Algorithm‖, National Conference AQMENT-2006, Erode Sengunthar Engineering College, Erode.
16. M.Murugan, R.Sivaprakasam and V.Selladurai, ―Performance Measure of Cells through
Genetic Algorithm‖, International National Conference CARFOF-06 held at Vellore Institute of Technology, Vellore.
17. K.Mani and V.Selladurai, ―Refrigerants and their impacts on Environment‖, Proceedings of the
International Interdisciplinary Conference on sustainable Technologies for Environmental Protection (ICSTEP 2006) – Probing the boundaries, Coimbatore Institute of Technology, India Jointly with University of Toledo, Ohia, USA, January 7-9, 2006, p.112.
18. K.Elangovan, V.Selladurai, S.R.Devadasan and S.Muthu, ―Executive Support System for
Strategic Maintenance Quality Engineering Programme: An Experimental Model‖, International conference on Emerging Technologies in Intelligent System and Control (EISCO-2005), Kumaraguru College of Technology, Coimbatore, January 5-7, 2005, pp. 747-752.
19. K.U.Kameshwaran, S.P.Arul, C.Venkatesh and V.Selladurai, ―Implicit Modeling of Shape
Memory behavior using Artificial Neural Network‖, Accepted for 12th
National convention of Electro Chemist, Society for Advancement of Electro-Chemical Science and Technology (SAEST) Thiagaraja College Of Engineering, Madurai, February 18-19, 2005.
20. S.P.Arul, K.Saravanan and V.Selladurai, ―Study on Thermo Mechanical Behavior of Shape
Memory Alloy‖, Accepted for 12th National Convention of Electro Chemist, Society for
Advancement of Electro-Chemical Science And Technology (SAEST), Thiagaraja College of Engineering, Madurai, February 18-19, 2005.
21. C.Arumugam, V.Selladurai, K.M.Senthil Kumar, S.A.Kumar and K.Elangovan, ―Innovative
quality in Agile manufacturing environment through QFD‖, National conference on Innovated Total Quality Management (ITQM 2005), PSG College of Technology, Coimbatore, during February 25-26, 2005, pp. 51-52.
22. C.Arumugam, V.Selladurai, K.M.Senthil Kumar, S.A.Kumar and K.Elangovan, ―Innovative
Quality through Data Integration in Agile Manufacturing‖, National conference on Innovated Total Quality Management (ITQM 2005), PSG College of Technology, Coimbatore, February 25-26, 2005, pp. 51-52.
23. K.Elangovan, V.Selladurai, S.R.Devadasan, and S.Muthu, ―Design and Development of ESS
for Strategic Maintenance Quality Engineering Programme‖, National conference on Latest trends in Mechanical Engineering in Department of Mechanical Engineering (NCLTME-2005), Dr. Mahalingam College of Engineering and Technology, Pollachi, April 1-2, 2005.
34
24. K.Balamurugan, V.Selladurai and B.Ilamathi, ―A Genetic Algorithm Approach to facility layout problem‖, 3
rd International Conference on Manufacturing Research Incorporating the 21
st
National NCMR, ICMR 2005, Cranefield University, September 6-8, 2005. 25. K.Elangovan, V.Selladurai, S.R.Devadasan, and S.Muthu, ―Strategic Maintenance Quality
Engineering through PROESEP‖, Twenty first National Convention of Mechanical Engineers and National Seminar on Strategies for new product development, Department of Mechanical Engineering of PSG College of Technology, Coimbatore, September 9 -10, 2005.
26. C.Aurumugam, V.Selladurai, K.M.Senthil Kumar and K.Elangovan, ―Agile Manufacturing
Environment through QFD – A Case Study‖, International Conference on Advances in Materials, Product Design and Manufacturing Systems (ICMPM 2005), Department of Mechanical Engineering of Bannarai Amman Institute of Technology, Sathyamangalam, December 12-14, 2005.
27. C.Arumugam, V.Selladurai, K.M.Senthil Kumar and K.Elangovan, ―Quality through data
Integration in Agile Manufacturing in pump industry‖, International Conference on Advances in Materials, Product Design and Manufacturing Systems (ICMPM 2005), Department of Mechanical Engineering of Bannarai Amman Institute of Technology, Sathyamangalam, December 12-14, 2005.
28. K.Elangovan, V.Selladurai, S.R.Devadasan and S.Muthu, ―Quality in Infrastructure
Maintenance through Executive Support‖, International Conference on Operations Research Applications in Infrastructure Development (ICORAID-2005-ORSI), December 27-29, 2005.
29. K.Raja, R.Radhakrishnan and V.Selladurai, ―Optimization of Machine Scheduling – A Fuzzy
Logic Approach‘, National Conference on Product Development with Mechatronic Systems for Global Quality, Thiagarajar College of Engineering, Madurai, during May 2 – 3, 2005.
30. K.Mani and V.Selladurai, ―Hydrocarbon refrigerants as substitute for CFCs, HCFCs and
HFCs‖, Proceedings of the National Conference on Latest Trends in Mechanical Engineering, Dr.Mahalingam College of Engineering and Technology, Pollachi, India, April 1-2, 2005, pp. 83 – 85.
31. K.Mani and V.Selladurai, ―Ozone depleting substances and their alternative refrigerants‖,
Proceedings of the National Conference on Globally Competitive Eco-friendly Technologies in Mechanical and Mechatronics Engineering (GETME-2005), Kongu Engineering College, Erode, India, April 15-16, 2005, pp. A33-A35.
32. K.Mani and V.Selladurai, ―Ozone safe and climate friendly refrigerants in refrigeration and air-
conditioning systems‖, Proceedings of the National Conference on Frontiers in Environmental Sciences and Engineering‘, Bharathiar University, Coimbatore, India, September 15-17, 2005, p.61.
33. G.Sasikumar, K.Thirunavukkarasu and V.Selladurai, ―Production Management by Theory of
Constraints‖, International Conference on Responsive Supply Chain Management (RSC-2004), January 5-7, 2004, Coimbatore Institute of Technology, Coimbatore -641 014.
34. K. Rajkumar, S.P.Arul and V.Selladurai, ―Constitutive modeling of SMA using Neural Network‖,
International Conference on Responsive Supply Chain Management (RSC-2004), January 5-7, 2004, Coimbatore Institute of Technology, Coimbatore - 641 014.
35
35. P.Manimaran, V.Selladurai and G.Sasikumar, ―A Genetic Algorithm for Multi-commodity, Multi-Echelon, Multi-Stage Logistics Supply Chain Network‖, International Conference on Responsive Supply Chain Management (RSC-2004), January 5-7, 2004, Coimbatore Institute of Technology, Coimbatore - 641 014.
36. R.Rahul Jain, K.Raja and V.Selladurai, ―Cyclic Scheduling for a Re-Entrant Job Shop
Industry‖, International Conference on Responsive Supply Chain Management (RSC-2004), January 5-7, 2004, Coimbatore Institute of Technology, Coimbatore - 641 014.
37. T.Alwarsamy, P.Thangavel, R.Balasubramanian and V.Selladurai, ―Investigation of Dynamic
Behavior of Cutting Tool Using FEM Model‖, International Conference on Responsive Supply Chain Management (RSC-2004), January 5-7, 2004, Coimbatore Institute of Technology, Coimbatore - 641 014.
38. R.Kannan, V.Selladurai and SM.Kannan, ―Analysis of Clearance Variation in Selective
Assembly‖, International Conference on Responsive Supply Chain Management (RSC-2004), January 5-7, 2004, Coimbatore Institute of Technology, Coimbatore - 641 014.
39. B.Ganesh Babu, V.Selladurai and P.Thangavel, ―Simulation of Regenerative Force and
Dynamic Deflection Model of End Milling Process‖, Proceedings of the National Conference on Modeling and Analysis of Production Systems (MAPS 2004), 22-23 January 2004, National Institute of Technology, Thiruchirappalli – 620 015, pp. 232-236.
40. P.Thangavel, T.Alwarsamy and V.Selladurai, ―A Simple Approach for Feed Cutting Force
Estimation in Turning using Current Measurement‖, National Conference on Recent Advance in Manufacturing Engineering (RAIME04), January 30-31, 2004, National Engineering College, Kovilpatti-628 503.
41. S.Kumaravadivelan, S.P.Arul and V. Selladurai, ―Modelling and analysis of Shape memory
Alloys 3D Stent using FEM‖, National Conference on emerging trends in Engineering and Technology, May 1-3, 2004, Dr. MGR College of Engg. and Technology, Chennai.
42. T. Babusenthil kumar, S.P. Arul and V. Selladurai, ―Design Reliability and Quality Assurance of
Hydraulically Operated Cryo-Arms Swing control mechanism in GSLV Rocket‖, National Conference on emerging trends in Engineering and Technology, May 1-3, 2004, Dr. MGR College of Engg. and Technology Chennai.
43. D.Vasudevan, V.Selladurai and P.Nagaraj, ―A Closed form solution to single Sampling
Attribute plans indexed by AQL,LQL and AOQL‖, National Conference on Challenges in Achieving Global Quality, CAGQ, Department of Mechanical Engineering, Thiagarajar College of Engineering, Madurai, May 25-25, 2004, pp.49-52
44. S.Arivandan, K.Raja, S.Bhaskar, V.Selladurai, ―Bi-Criterion Scheduling Model in Manufacturing
Systems‖, National Conference on Environmentally Conscious Design and Manufacturing –Issues and Challenges (ECDM 2004), Kumuraguru College of Technology Coimbatore - 641 006, July 23-24, 2004,
45. P.Manimaran, V.Selladurai, V.Parthiban and G.Sasikumar, ―A Genetic Algorithm for Optimisation of Production – Distribution System in Supply Chains‖, Second International Conference on Logistics and Supply Chain Management (ILSCM 2004), PSG College of Technology, Coimbatore - 641 004, August 3-5, 2004,
46. K.Raja, V.Selladurai, S.Aravindan, A.Rajesh and R.Sudhakaran, ―Performance Improvement
Through Genetic Algorithm based Parallel Machine Scheduling‖ XXXXVI National Convention
36
on Quality Management in the 21st Century, Indian Institution of Industrial Engineering,
Trivandrum - 695 016, September 24-26, 2004. 47. K.Elangovan, V.Selladurai, S.R.Devadasan and S.Muthu, ―Executive Support System for
SMQE programme: A Prototype Model‖ XXXXVI National Convention on Quality Management in the 21
st Century, Indian Institution of Industrial Engineering, Trivandrum - 695 016,
September 24-26, 2004. 48. D.Vasudvan and V.Selladurai, ―Determination of Sampling Plans using ANN Version‖,
International Conference and Exhibition on Total Engineering, Analysis and Manufacturing Technologies (TEAM TECH 2004), Indian Institute of Science, Bangalore, November 2-4, 2004.
49. K.Elangovan, V.Selladurai, S.R.Devadasan and S.Muthu, ―Executive Support System for
Strategic Maintenance Quality Engineering Programme: A Prototype Version‖, International Conference and Exhibition on Total Engineering, Analysis and Manufacturing Technologies (TEAM TECH 2004), Indian Institute of Science, Bangalore, November 2-4, 2004.
50. P.Manimaran, V.Selladurai and V.Parthiban, ―A Simulated annealing methodology for multi-
stage logistics in Supply Chain Network‖, International Conference on Manufacturing and Management (GCMM-2004), Vellore Institute of Technology, Vellore –632 014, December 8-10, 2004.
51. K.Rajkumar, S.P.Arul and V.Selladurai, ―Constitutive Modeling of SMA using Neural Network‖,
International conference on Responsive Supply Chain Management-RSC-2004, January 5-7, 2004.
52. T.Babusenthil kumar, S.P.Arul and V.Selladurai, ―Design Reliability & Quality Assurance of
Hydraulically Operated Cryo-Arms Swing Control Mechanism in GSLV Rocket‖, National Conference on Emerging Trends in Engg. & Technology, Dr.MGR College of Engg. and Technology, Chennai, May 1 - 3
, 2004.
53. S.Kumaravadivelan, S.P.Arul and V.Selladurai, ―Modelling and Analysis of Shape Memory
Alloys 3D Stent using FEM‖, National Conference on Emerging Trends in Engg. and Technology, Dr.MGR College of Engg. & Technology, Chennai, May 1-3, 2004.
54. P.Thangavel, V.Selladurai and T.Alwarsamy, ―A Simple approach for feed cutting force
estimation in turning using current measurement‖, Proc. of the National Conference on Recent Advance in Manufacturing Engineering, National Engineering College, Kovilpatti, India, 2004.
55. K.Raja, S.Aravindan and V.Selladurai, ―Bi-Criterion Scheduling Model in Manufacturing
Systems‘, National Conference on Enviromentally Conscious Design and Manufacturing, at Kumaraguru College of Technology, Coimbatore, July 23 – 24, 2004.
56. K.Raja, S.Aravindan and V.Selladurai, ―Performance Improvement through Genetic Algorithm
based Parallel Machine Scheduling‘, XXXXVI IIIE National Conference, Trivandrum, September 24 -26, 2004.
57. P.Senthil Velmurugan and V.Selladurai, ―Ant Colony Optimization for Job Shop Scheduling‖
International Conference on Digital Aided Modelling and Simulation (DAMS 2003), Coimbatore Institute of Technology, Coimbatore, January 6-8, 2003.
58. B.Ganesh Babu and V.Selladurai, ―Statistical Design of Experiments for Measuring the Cutting
Forces in End Milling‖, Proceedings of National Conference on Quality Engineering and Management (NCQE 2003), January 3-4, 2003, pp. 8-12.
59. P.Palanisamy, C.Sasi Kumar, S.Shanmugasundaram and V.Selladurai, ―Analysis of Flow
Induced Vibration using CFD‖, International Conference on Digital Aided Modelling and
37
Simulation (DAMS 2003) - An Evolutionary Approach for Optimization, Coimbatore Institute of Technology, Coimbatore - 641 014, January 6-8, 2003. Paper No. 90.
60. B.Ganesh Babu and V.Selladurai, ―Development of Algorithm and Simulation for Cutting
Forces Face and End Milling Operations on AI – 7075, ―International Conference on Digital Aided Modelling and Simulation (DAMS 2003) - An Evolutionary Approach for Optimization, Coimbatore Institute of Technology, Coimbatore - 641 014, January 6-8, 2003, Paper No. 93.
61. P.Senthil Velmurugan and V.Selladurai, ―Ant Colony Optimization for Job Shop Scheduling‖,
International Conference on Digital Aided Modelling and Simulation (DAMS 2003) - An Evolutionary Approach for Optimization, Coimbatore Institute of Technology, Coimbatore - 641 014. January 6-8, 2003, Paper No. 95.
62. V.Senthil, S.R.Devadasan and V.Selladurai, ―Digital Devices for Reengineering product quality
design‖, International Conference on Digital Aided Modelling and Simulation (DAMS 2003) - An Evolutionary Approach for Optimization, Coimbatore Institute of Technology, Coimbatore -641 014, January 6-8, 2003, Paper No. 96.
63. S.P.Arul, T.S.Kulandaisamy and V.Selladurai, ―Thermo Mechanical Modelling of Shape
Memory Alloys,‖ International Conference on Digital Aided Modelling and Simulation (DAMS 2003) - An Evolutionary Approach for Optimization, Coimbatore Institute of Technology, Coimbatore - 641 014, January 6-8, 2003, Paper No. 98.
64. S.Rajakumar, V.P.Arunachalam and V.Selladurai, ―Performance Measurement in Parallel
Machine Scheduling‖, International Conference on Digital Aided Modelling and Simulation (DAMS 2003) - An Evolutionary Approach for Optimization, Coimbatore Institute of Technology, Coimbatore - 641 014, January 6-8, 2003, Paper No111.
65. D.Vasudevan and V.Selladurai, ―Controlling Lot Tolerance Percent Defectives (LTPD) in
Acceptance Sampling Plans using ANN‖, International Conference on Digital Aided Modelling and Simulation (DAMS 2003) - An Evolutionary Approach for Optimization, Coimbatore Institute of Technology, Coimbatore - 641 014, January 6-8, 2003, Paper No. 156.
66. C.Arumugam, R.Sivasubramanian and V.Selladurai, ―Application of Synchronous
Manufacturing Concepts for Improved Profitability‖, International Conference on Digital Aided Modelling and Simulation (DAMS 2003) - An Evolutionary Approach for Optimization, Coimbatore Institute of Technology, Coimbatore - 641 014, January 6-8, 2003, Paper No. 106.
67. P.Thangavel, V.Selladurai and T.Alwarsamy, ―Optimization of Manufacturing Process for
Maximizing Tool Life‖, National Conference on Emerging Trends in Engineering, Technology and Management, Adhiyamaan Engineering College, Hosur - 635 109, September 8-9, 2003,
68. K.Raja, P.Sathyabalan, V.R.Sivakumar and V.Selladurai, ―Parallel Machine scheduling‖,
Proceedings of the 2nd
National Conference on Computer Integrated Design and Manufacturing, Amrita Institute of Technology, Coimbatore 641 105, November 28-29, 2003.
69. G.Sasikumar, K.Thirunavukkarasu, V.Selladurai, ―Dynamic Modeling for Reengineering Supply
Chain‖, Sixth International Conference of the Association of Asia Pacific Operational Research Societies within IFORS (APORS 2003), December 8-11, 2003, New Delhi.
70. G.Sasikumar, K.Thirunavukkarasu and V.Selladurai, ―Product and Process Design Strategic
for Effective Supply Chain Management‖, Sixth International Conference of the Association of Asia Pacific Operational Research Societies within IFORS (APORS 2003), New Delhi, December 8-11, 2003.
38
71. S.P.Arul, N.Anbuchezhian and V.Selladurai, ―Major Approaches in Design Optimization‖, International Conference on Digital Aided Modelling and Simulation (DAMS 2003) - An Evolutionary Approach for Optimization, Coimbatore Institute of Technology, Coimbatore - 641 014, January 6 -8, 2003.
72. P.Thangavel, V.Selladurai and T.Alwarsamy, ―Optimization of machining process for
maximizing tool life‖, Proc. of the National Conference on Emerging Trends in Engineering Technology and Management, Adhiyamaan Engineering College, Hosur, India, 2003.
73. K.Raja, P.Sathyabalan and V.Selladurai, ―Parallel Machine Scheduling‖, in the National
Conference on Computer Integrated Design and Manufacturing‖, Amrita Institute of Technology, Coimbatore, November 28-29, 2003.
74. G.Sasikumar, V.Selladurai and K.Thirunavukkarasu, ―Dynamic Modeling for Reengineering
Supply Chains‖, Sixth International Conference of the association of Asia Pacific Operational Research Societies – APORS 2003, Operational Research Society of India, New Delhi, India, December 8-10, 2003.
75. G.Sasikumar, V.Selladurai and K.Thirunavukkarasu, ―Product and Process Design Strategies
for Effective Supply Chain Management‖, Sixth International Conference of the association of Asia Pacific Operational Research Societies – APORS 2003, Operational Research Society of India, New Delhi, India, December 8 – 10, 2003.
76. G.Sasikumar, V.Selladurai and C.Sasikumar, ―Co-ordinated Supply Chain Design‖, National
Conference on World Class Manufacturing – WCM 2003, Amrita Institute of Technology, Coimbatore, India, May 7 – 9, 2003.
77. P.Senthil Velmurugan and V.Selladurai, ―ANT Colony Optimization for Job Shop Scheduling‖,
International Conference on Operational Research for Development and National Development, Anna University, Chennai, December 27-30, 2002.
78. P.Senthil Velmurugan and V.Selladurai, ―Parameter Evaluation of Ant Colony Optimization for
Job Shop Scheduling‖ International Conference on Operations Research for Development, (ICORD 2002), Anna University, Chennai, Operational Research Society of India, Chennai and Bangalore Chapters, December 27-30, 2002.
79. S.P.Arul, T.S.kulandaisamy and V.Selladurai, ―The Thermo Mechanical Response of Shape
Memory Wire (NITINOL) – Constitutive Modeling, Finite Element Implementation and Numerical Simulation‖, ISSS SPIE 2002, International Conference on Smart Materials, Structures and Systems, IISC Bangalore, December 12-14, 2002, pp. 868-873.
80. P.V.Senthiil and V.Selladurai, ―Computer Based Parallel Machine typical Jobshop scheduling‖
Proceedings of the 12th ISME Conference on Challenges in product and process design and
development in the information ERA, Crescent Engineering College, Chennai, January 10 - 12, 2001, pp. 440-446.
81. P.V.Senthiil and V.Selladurai, ―Parallel Machine Performance Measure Optimization using
Genetic Algorithm for a Job Shop‖, Proceedings of the National Conference on Computer Integrated Design and Manufacturing (NCCIDM), Amrita Institute of Technology and Science, Coimbatore-05, May 14-15, 2001, pp. 385-390.
82. P.V.Senthiil and V.Selladurai, ‖Simulation Systems of High Tech Manufacturing and Result
code Generation with Animation Snapshot Modeling‖, Proceedings of the National Conference on Computer Integrated Design & Manufacturing (NCCIDM), Amrita Institute of Technology and Science, Coimbatore – 641 005, May 14-15, 2001, pp. 254-260.
39
83. P.V.Senthiil and V.Selladurai, ―Quality approach linked computer based job shop scheduling with job sequence improvisation‖, Proceedings of the Conference on Reliability analysis and Engineering (NSRAE2001), Institute of Armament Technology (DRDO), Pune, June 14–15, 2001.
84. P.V.Senthiil and V.Selladurai, ―Flexible workshop; about the concept of flexibility‖, Proceedings
of the International conference on Logistics and Supply Chain Management in association with Michigan University, USA, PSG College of Technology, Coimbatore, August 6-8, 2001.
85. P.V.Senthiil and V.Selladurai, ―Supply chain management with parallel machines shop floor
environment of job shops‖, Proceedings of the International Conference on Logistics and Supply Chain Management in association with Michigan University, USA, PSG College of Technology, Coimbatore, August 6-8, 2001.
86. P.V.Senthiil and V.Selladurai, ―Multiple attribute schedule selection a fuzzy logic based
algorithm‖ Proceedings of the International Conference on Industrial Mathematics, IIT Madras, Chennai, August 12-14, 2001.
87. P.Senthil Velmurugan and V.Selladurai, ―Job Shop Scheduling: A Research Perspective‖,
International Conference on Optimization Techniques and its Applications in Engineering and Technology, September 22-23, 2001.
88. P.Senthil Velmurugan and V.Selladurai, ―Optimization – Inspiration from social behavior‖,
Proceedings of the Thirty Fourth Convention of ORSI – International Conference on Operational Research and National Development, December 27-29, 2001, pp. 189 -191.
89. P.Senthil Velmurugan and V.Selladurai, ―Optimization – Inspiration from social insect behavior‖
International Conference on Operational Research and National Development, Operational Research Society of India, Calcutta Chapter-700019, December 27-29, 2001.
90. V.Senthil, S.R.Devadasan, P.A.Mohammed Regims and V.Selladurai, ―BPR Enabled Quality
Information System‖, Proceedings of the International Symposium on Management and Quality, Amirtha Institute of Management, Coimbatore, January 2-3, 2000.
91. P.Nagaraj and V.Selladurai, ―Function approximation of total system cost for a continuous
manufacturing system – a case study‖, Proceedings of the International Conference on Intelligent Flexible Autonomous Manufacturing Systems, Coimbatore Institute of Technology, Coimbatore, January 10-12, 2000, pp. 103-107.
92. V.Senthil, S.R.Devadasan, B.Sampathkumar and V.Selladurai, ―BPR enabled Quality Circle
Programme‖, Proceedings of the International Conference on Intelligent Flexible Autonomous Manufacturing Systems, Coimbatore Institute of Technology, Coimbatore, January 10-12, 2000, pp. 142-146.
93. R.Subramanian and V.Selladurai, ―Re-Engineering Similar Process industry through material
codification‖, Proceedings of the International Conference on Intelligent Flexible Autonomous Manufacturing Systems, Coimbatore Institute of Technology, Coimbatore, January 10-12, 2000. pp. 147-154.
94. N.Anbuchezhian, S.P.Arul and V.Selladurai, ―A survey of major approaches for design
optimization‖, Proceedings of the International Conference on Intelligent Flexible Autonomous Manufacturing Systems, Coimbatore Institute of Technology, Coimbatore, January 10-12, 2000. pp. 229-234.
95. R.Rajesh, R.Rangarajan and V.Selladurai, ―Computational Fluid Dynamics – A Role in heating
ventilation air conditioning and refrigeration‖, Proceedings of the International Conference on
40
Intelligent Flexible Autonomous Manufacturing Systems, Coimbatore Institute of Technology, Coimbatore, January 10-12, 2000, pp. 290-297.
96. S.PerezhilVendan, V.Selladurai, R.Rudramoorthy, S.Dhandapani and S.R.Devadasan,
―Design of Humidification system and optimization of locations for the diffusers in a textile plant using FEM‖, Proceedings of the International Conference on Intelligent Flexible Autonomous Manufacturing Systems, Coimbatore Institute of Technology, Coimbatore, January 10-12, 2000. pp. 311- 316.
97. R.Rajesh, R.Rangarajan and V.Selladurai, ―Applications of Computational Fluid Dynamics - a
Survey‖, Proceedings of the International Conference on Intelligent Flexible Autonomous Manufacturing Systems, Coimbatore Institute of Technology, Coimbatore, January 10-12, 2000. pp. 334-342.
98. P.V.Senthil and V.Selladurai, "Pipe Line Processing (PLP) of jobs to achieve optimal
performance measures with varied number of jobs/operation stage bound PMS system input combinations‖, Proceedings of the International Conference on Intelligent Flexible Autonomous Manufacturing Systems, Coimbatore Institute of Technology, Coimbatore, January 10-12, 2000. pp. 761-767.
99. R.Sivasubramanian and V.Selladurai, ―Elimination of bottleneck resources through Drum-
Buffer-Rope (DBR) approach in a synchronous manufacturing system‖, Proceedings of the International Conference on Intelligent Flexible Autonomous Manufacturing Systems, Coimbatore Institute of Technology, Coimbatore, January 10-12, 2000, pp. 849-855.
100. R.Sivasubramanian and V.Selladurai, ―Application of Principles and Methodologies of
Synchronous Manufacturing in Marketing and Production – A Case Study‖, Proceedings of the Third International Stimulating Manufacturing Excellence in Small and Medium Enterprises Conference, Coventry University, United Kingdom, April 17-19, 2000, pp. 377 – 387.
101. Pl.K.Palaniappan, V.Selladurai and N.Jawahar, ―Capacity Planning of Flexible Assembly Line‖,
National Seminar on Optimization Techniques in Manufacturing Practice - 2000, Department of Mechanical Engineering, Kumaraguru College of Technology, Coimbatore - 600 006, sponsored by CII – Coimbatore Chapter, 18
th March 2000.
102. V.Senthil, S.R.Devadasan and V.Selladurai, ―A Literature Survey on TQM and BPR Integration
using Anbar Electronic Intelligence CD-ROM‖, International Conference on Production Research Special ICPR 2000 – Facing the challenge in the new Millennium at Bangkok, Thailand, August 2-4, 2000.
103. V.Selladurai, C.Arumugam and R.Sivasubramanian, ―Profit maximization through Synchronous
Manufacturing Principle‖, Proceedings of 42nd
National Convention of Indian Institution of Industrial Engineering on Globalization and WTO Role of Industrial Engineering, Organized by Coimbatore Chapter, September 29 - 30, 2000, pp. 103 -109.
104. V.Senthil, S.R.Devadasan and V.Selladurai, ―Facing the challenges of WTO by improving
quality in product design through BPR‖, Proceedings of the 42nd
National Convention of Indian Institution of Industrial Engineering on Globalization and WTO Role of Industrial Engineering, IIE Coimbatore Chapter, September 29 - 30, 2000, pp. 115 - 120.
105. P.V.Senthiil and V.Selladurai, ―Non Pre-emptive Parallel Machine Scheduling Algorithm for a
Job Shop with computer based approach‖ Proceedings of the OR-2000 XXXIII annual convention of the Operational Research Society of India, IIM, Ahmedabad, December 14-16, 2000, pp. 86-95.
41
106. P.V.Senthiil and V.Selladurai, ―An Efficient Algorithm to develop MPM based PMS subject to due dates‖, Proceedings of the 42
nd National Convention of Indian Institution of Industrial
Engineering on Globalisation and WTO Role of Industrial Engineering, IIIE Coimbatore Chapter, September 29 - 30, 2000.
107. V.Senthil, S.R.Devadasan and V.Selladurai, ―Software for BPR Enabled Taguchi‘s offline
control method‖, International Conference on Quality, Reliability and Information Technology at the tune of the Millennium (ICQRIT 2000), Indian National Science Academy, New Delhi, December 21-23, 2000.
108. P.V.Senthiil and V.Selladurai, ―Computer Based shop scheduling using NPPMS techniques‖
Proceedings of the International Conference on Quality, Reliability and Information Technology at the turn of the Millennium, Indian National Science Academy, New Delhi, December 21-23, 2000, pp. (QR122-129).
109. V.Senthil, S.R.Devadasan and V.Selladurai, ―Quality in Product Design through BPR‖,
International Conference on Quality, Reliability and Information Technology at the turn of the Millennium, Indian National Science Academy, New Delhi, December 21-23, 2000.
110. P.V Senthiil, V.Selladurai and N.Rajam Ramasamy, ―A Knowledge Based Simulation Model for
Job shop Scheduling‖ Proceedings of the Operations Management Conference - 4, Indian Institute of Technology, Chennai, December 22-24, 2000, pp. 100-105.
111. R.Sivasubramanian, V.Selladurai and N.Rajam Ramasamy, ―Scheduling Bottleneck Resources
in a Dynamic Job Shop‖, Proceedings of the Operations Management Conference - 4, Indian Institute of Technology, Chennai, December 22-24, 2000, pp. 106-111.
112. S.R.Devadasan, M.Ramesh, V.Senthil and V.Selladurai, ―Reengineering ISO 9002 Quality
System Model‖, Proceedings of the National Seminar on Manufacturing Technology for 21st
Century and Reorganization of Engineering Education, Government Engineering College, Trichur, 19-20, March, 1999.
113. S.R.Devadasan, B.Sampathkumar, V.Senthil and V.Selladurai, ―BPR Integrated Quality Circle
Programme‖, Proceedings of the Conference on Information Technology for Management Science Applications, ORSI, Bangalore Chapter, July 27 - 28, 1999.
114. S.R.Devadasan, M.Ramesh, V.Senthil and V.Selladurai, ―Quality improvement through
Reengineered Quality Systems‖, Proceedings of the National Conference on Quality Engineering in Aerospace Technologies, Center for Military Airworthiness and certification (CEMILAC) Bangalore, August 20 - 21, 1999, Vol.1.C1-5.
115. R.Sivasubramanian, V.Selladurai and N.Rajam Ramaswamy, ―The Cost/Throughput Analysis
on the performance of a Synchronous Manufacturing System‖ Proceedings of the National Conference on Agile Engineering, Birla Institute of Technology, Ranchi, October 4-5, 1999.
116. R.Sivasubramanian, V.Selladurai and N.Rajam Ramaswamy, ―The Cost/Throughput Analysis
on the performance of a Synchronous Manufacturing System‖, Proceedings of the International Seminar on Manufacturing Technology Beyond 2000, Bangalore, November 17-19,1999, pp. 320-325.
117. V.Senthil, S.R.Devadasan, B.Sampathkumar and V.Selladurai ―Re-engineering Quality Circle
Programme‖, Proceedings of the International Seminar on Manufacturing Technology Beyond 2000, Bangalore, November 17-19,1999, pp. 450 -455.
118. V.Senthil, S.R.Devadasan, P.A.Mohammed Regims and V.Selladurai, ―Quality Improvement
through BPR Integrated Quality Information System‖, Proceedings of the National seminar on
42
Reliability Analysis and Engineering (NSRAE - 99), VSSC, Trivandrum, December 15 -16, 1999.
119. V.Senthil, S.R.Devadasan, P.A.Mohammed Regims and V.Selladurai, ―BPR Integration in
Quality System through IT‖, Proceedings of the IIIE-XXXXI National convention on IE, IT system integration in the New Millennium, IIIE, Visakapatnam, December 17-18, 1999.
120. P.V Senthiil and V.Selladurai, ―Knowledge based PMS methodology‖, Proceedings of the
National Conference on Industrial Engineering towards 21stcentury, Mechanical Department,
Tirupathi Venkateswara University, January 19-20, 1998, pp. 41-48. 121. N.Rajam Ramasamy, R.Sivasubramanian and V.Selladurai, ―Study of just in time technique for
developing country: a survey‖, 21st National systems conference NSE- at DRDL Hyderabad,
January 23 - 24, 1998, pp. 431-435. 122. K.Rajesh, N.Rajam Ramasamy, R.Sivasubramanian, V.Selladurai and N.Rangaraj, ―Job
scheduling using Genetic Algorithm‖, First Two day Conference on Intelligent Manufacturing Systems, Coimbatore Institute of Technology, Coimbatore-641 014, February 6-7,1998, pp. J.6.1. – J.6.8.
123. V.Karthik, R.Sivasubramanian and V.Selladurai, ―Analysis of Synchronous Manufacturing
System using Simulation‖, First Two day Conference on Intelligent Manufacturing Systems, Coimbatore Institute of Technology, Coimbatore – 641 014, February 6-7, 1998, pp. L7.1. – L7.8.
124. K.Rajesh, R.Sivasubramanian, V.Selladurai, "Application of theory of constraints (TOC) to the
manufacturing systems," First Two day National Conference on Intelligent Manufacturing Systems, Coimbatore Institute of Technology, Coimbatore-641 014, February 6-7, 1998, pp. N.5. 1 –N.5.6.
125. P.V.Senthiil and V.Selladurai, ―Parallel Machine Scheduling (PMS) to minimize Expected Mean
Flow Time (MFT)‖, First Two day National Conference on Intelligent Manufacturing Systems, Coimbatore Institute of Technology, Coimbatore, February 6 -7, 1998, pp. E.2.1 –E.2.6.
126. P.Nagaraj and V.Selladurai, ―Study of two stage Manufacturing Inventory systems with finished
product Inventory‖, Proceedings of the International Conference on Operational Research for a better tomorrow (ICORBT‘ 98), Delhi Chapter of ORSI, New Delhi, December 24 -26, 1998.
127. P.Nagaraj and V.Selladurai, ―The Dynamic Lot-sizing Problem for Multi-stage, Multi-Facility
Manufacturing Inventory System‖, CAD/CAM, Robotics and Factories of Future, PSG College of Technology, Coimbatore -641004, December 1-3, 1998, pp. 600 – 606.
128. S.R.Devadasan, M.Ramesh, V.Senthil and V.Selladurai, ―Reengineering Quality Systems
through Information Technology‖, Proceedings of the International Conference on Operational Research for a better tomorrow (ICORBT‘ 98), Delhi Chapter of ORSI, New Delhi, December 1-3, 1998, pp. 600 - 606.
129. V.Selladurai, R.Sivasubramanian, N.Rajam Ramasamy and K.Chandrasekeran, "Simulation
and Modelling of Manufacturing Systems for higher throughput", National seminar on Emerging Trends in manufacturing Processes, NIFFT, Ranchi, November 1997, pp. T11.1 - T11.5.
130. V.Selladurai, R.Sivasubramanian, N.RajamRamasamy and K.Chandrasekaran, "Study of just
in time technique to improve throughput of manufacturing systems", National seminar on Emerging Trends in manufacturing Processes, NIFFT, Ranchi, November 1997, pp. T12.1 - T12.5.
43
131. R.Sivasubramanian, N.Rajamramaswamy, V.Selladurai, "An analysis of FMS in batch production", Proceedings of International Conference on, CAD/CAM Automation, Robotics and Factories of Future, Jamia Millia Islamia, New Delhi, December 1996, pp. 174 - 179.
132. N.Rajam Ramasamy, V.Selladurai, R.Natarajan and P.K.Muthusamy, "Modelling and
Simulation of a simple factory to study the complex behaviour", Proceedings of International Conference on, CAD/CAM Automation, Robotics and Factories of Future, Jamia Millia Islamia, New Delhi, December 1996, pp. 752 - 763.
133. S.Sakthivel, V.Selladurai, R.Natarajan and T.V.Moorthy, "Dynamics analysis for the design of
Robot", Proceedings of International Conference on CAD/CAM Automation, Robotics and Factories of Future, Jamia Millia Islamia, New Delhi, December 1996, pp. 206 - 213.
134. P.Aravindan, S.R.Devadasan and V.Selladurai, "Quality Information System: an imperative for
infusing quality in materials" Proceedings of the International Conference on Materials Management and Inventory Control sponsored by The International Society for Inventory Research (ISIR), Dr.G.R.Damodaran College of Science, Coimbatore, January 3 - 7, 1994.
135. P.Aravindan, S.R.Devadasan and V.Selladurai, ―Excellence in quality management of
materials through quality function development" Proceedings of the International Conference on Materials Management and Inventory Control sponsored by The International Society for Inventory Research (ISIR), Dr.G.R.Damodaran College of Science, Coimbatore, January 3 - 7, 1994.
136. P.Aravindan, S.R.Devadasan and V.Selladurai, ―Online quality control of materials through
quality function development" Proceedings of the International Conference on Materials Management and Inventory Control sponsored by The International Society for Inventory Research (ISIR), Dr.G.R.Damodaran College of Science, Coimbatore, January 3 - 7, 1994.
137. R.Manivel, V.Selladurai and R.Natarajan, ―An Expert system for trouble diagnosis of
reciprocating refrigerant compressors‖, First National Conference on Fluid Machinery, Bombay, February 10 - 11, 1994.
138. P.Aravindan, S.R.Devadasan and V.Selladurai, "Quality system for continuous improvement of
personnel quality: The Imperative in Modern Manufacturing Technology", Proceedings of the International Conference on Modern Industrial Training (CMIT), Honkong Polytechnic, China, October 1994.
139. V.Selladurai, P.Aravindan, P.K.Muthusamy and Muralikrishna, "Development of Scheduling
software for FMC with automatic setup equipment using dynamic programming", International Conference on Stochastic models, Optimization Techniques and Computer Applications, PSG College of Technology, Coimbatore - 641 004, December 15-17, 1994, pp. 373 - 384.
140. V.Selladurai and P.Aravindan, ―Dynamics analysis of industrial systems to improve productivity
through computer simulation - an Industrials Dynamics Approach", Proceedings of the XVI National systems Conference, Anna University, Madras, February 17 - 19, 1993, pp. 33 - 38.
141. V.Selladurai and P.Aravindan, ―The Impact of Industrial and technology policy of India on
Industrial growth and technological progress‖, Proceedings of VII Indian Engineering Congress, Bangalore, February 1993, pp. 15-24.
142. V.Selladurai, P.Aravindan and R.Satheesan, ―Discrete event simulation of FMS for optimal
scheduling through interactive animation‖, Proceedings of VIII - ISME Conference, IIT, New Delhi, March 5 - 6, 1993, pp. 577-582.
44
143. V.Selladurai and P.Aravindan, ―Industrial Capacity Planning through dynamic simulation for higher productivity an Industrial Approach‖, Proceedings of the V National Conference on System Dynamics, IIT, New Delhi, March 19-21, 1993, pp. 219-229.
144. V.Selladurai, P.Aravindan and R.Satheesan, ―Interactive Computer Graphics simulation for
scheduling FMS‖, VIII National Convention of Production Engineers, Mothilal Nehru Regional Engineering, Allahabad, July, 1993.
145. V.Selladurai, P.Aravindan and R.Parthasarathi, ―Design of a stabilized sequence planning
system using computer simulation‖, VIII National Convention of Production Engineers, Mothilal Nehru Regional Engineering, Allahabad, July, 1993.
146. P.Aravindan, S.R.Devadasan and V.Selladurai, ―Towards excellence of quality through
Taguchi Methods‖, Proceedings of the 35th National Convention of Indian Institution on
Industrial Engineering, Hyderabad, October 1993. 147. V.Selladurai, P.Aravindan and R.Satheesan, ―Dynamic scheduling of FMS through computer
Simulation and Interactive Graphics‖, International Conference on CAD/CAM, Robotics and Autonomous Factories, IIT, New Delhi, December 1993, Vol. III, pp. 61 - 68.
148. V.Selladurai, P.Aravindan and R.Parthasarathi, ―Development of a computer software for
planning stabilized sequence to operations in batch processing", International Conference on CAD/CAM, Robotics and Autonomous Factories, IIT, New Delhi, December 1993, Vol. III, pp. 259 - 267.
149. P.Aravindan, S.R.Devadasan, E.Narasimha Reddy and V.Selladurai, ―An Expert system for
Planning to implement successful Quality Circle Programme‖, Proceedings of the International Conference On CAD/CAM, Robotics And Autonomous Factories, IIT, New Delhi, December 1993, Vol. II, pp. 537 - 546.
150. V.Selladurai, P.Aravindan and R.Satheesan, ―Discrete event simulation of intelligent
manufacturing system (IMS) for optimal scheduling through interactive animation" International Computing Congress, Hyderabad, December 15-18, 1993, pp. 333 - 340.
151. V.Selladurai, P.Aravindan and R.Natarajan, ―Manufacturing Capacity assessment through
Computer Simulation for Batch Production‖, Proceedings of National Symposium on Optimization Techniques and Applications, Thiagarajar College of Engineering, Madurai, July 2- 3, 1992, pp. 252 – 261.
152. P.Aravindan, S.R.Devadasan and V.Selladurai, ―An Expert System for Failure Diagnosis of
Quality Circle Programs‖, Proceedings of 34th National Convention of Indian Institute of
Industrial Engineering, Pune, October 8 - 10, 1992. 153. P.Aravindan, S.R.Devadasan and V.Selladurai, ―Implementation of ISO 9000 Quality system
an immediate task of Industrial Engineering" Proceedings of 34th National Convention of Indian
Institute of Industrial Engineering, Pune, October 8 - 10, 1992. 154. P.Aravindan, S.R.Devadasan and V.Selladurai, ―Failure Mode and Effects Analysis Powerful
Tool for Quality Planning" Proceedings of 34th National Convention of Indian Institute of
Industrial Engineering, Pune, October 8 - 10, 1992. 155. P.Aravindan and V.Selladurai, ―The Institutional Responsibilities in Technical Education for
Human Resource Development‖, Proceedings of the ISTE National Seminar at REC, Trichy, October 26 - 27, 1992.
45
156. V.Selladurai, P.Aravidan, B.Rajesh and S.V.Varma, ―Dynamics Analysis of Manufacturing Systems to improve Industrial productivity through Computer simulation", Proceedings of the International conference on Design Automation and CIM, PSG Tech, Coimbatore, jointly with Rochester Institute of Technology, NewYork, USA, January, 1991, pp. 101-108.
157. L.Sreenivasan and V.Selladurai, ―Computer Aided Design of Portable Pneumatic Drilling
Machine using Auto LISP", proceedings of the international conference on Design Automation and CIM, PSG College of Technology, Coimbatore, jointly with Rochester Institute of Technology, Newyork, USA, January, 1991.
158. V.Selladurai, P.Aravindan, S.Muthu and K.Meher Srinivas, ―Dynamics Analysis of Aggregate
Planning and Scheduling in Batch Production using ICG‖, Proceedings of XXIV Annual convention of ORSI, Bangalore, December 26 - 28, 1991, Paper No.8.
159. P.Aravindan, V.Selladurai and S.C.Muthukumaran, ―Design and Development of a low cost Rig
for load testing of industrial gear reducers‖, Proceedings of VI National Convention of Mechanical Engineers, Bangalore Institution of Engineer (India), October 25 - 27, 1990, pp. 198 to 207.
160. P.Aravindan and V.Selladurai, ―Productivity increase in industrial process through wastivity‖,
Proceedings of the National Management Seminar, Calicut University, December 6 - 8, 1990. 161. V.Selladurai, P.Aravindan and G.Kumar, ―Dynamic Analysis of Production System‖,
Proceedings of the IV National Conference on Systems Dynamics,(SDSI), SVU College of Engineering, Tirupathi, December 14 - 16, 1990, pp. 104 - 107.
COURSES ATTENDED 1. QIP winter short-term course on Microprocessor Applications – 30 November to 11 December,
1987, IIT, Bombay. 2. ISTE Summer School on Computer Aided Manufacturing (CAM) And Robotics – 22.05.1988 to
04.06.1988, Department of Mechanical Engineering, College of Engineering, ANNA UNIVERSITY, Chennai – 600 025.
3. Ministry of Science and Technology, Government of India sponsored training programme on
Entrepreneurship Development – 29 May to 10 June, 1989, Indian Institute of Management, Bangalore.
4. ISTE Summer School on Advances in Production Tooling and Manufacturing Technology - June
7 - 20, 1989, Department of Mechanical Engineering, PSG College of Technology, Coimbatore - 641 004.
5. ISTE Winter School on Productivity Management – December 4 - 15, 1989 Centre for
Management Studies, IIT, New Delhi. 6. ISTE Summer School Programme on Recent Developments in Factory Automation Technology –
June 3 -16, 1990, PSG College of Technology, Coimbatore – 641 004. 7. ISTE sponsored short-term course on Robots in Manufacturing – 20 May – 1 June, 1991,
Manufacturing Engineering Section, Department of Mechanical Engineering, IIT, Chennai. 8. ISTE sponsored summer school on Computer Integrated Manufacturing – June 7 – 20, 1992,
Department of Mechanical Engineering, PSG College of Technology, Coimbatore.
46
9. ISTE sponsored summer school on Recent Advances in Manufacturing Systems Engineering and Total Quality Management - June 6 - 19, 1993, Department of Mechanical and Production Engineering, PSG College of Technology, Coimbatore.
10. Workshop on Concepts and Applications of Computational Fluid Dynamics – May 15 - 19, 2000,
Amrita Institute of Technology, Coimbatore. CONFERENCES / SEMINAR ATTENDED 1. VI National Convention of Mechanical Engineers, Bangalore, Institution of Engineer (India),
October 1990. 2. National Management Seminar, Calicut University, Calicut, December 6 - 8, 1990. 3. IV National Conference on Systems Dynamics,(SDSI), SVU College of Engineering, Tirupathi,
December 14 - 16, 1990. 4. International Conference on Design Automation and Computer Integrated Manufacturing,
PSG College of Technology, Coimbatore, 1991. 5. National Seminar on Newer Manufacturing Technique for higher productivity, National Institute of
Engineering, Mysore, November, 23, 1991. 6. National Symposium on Optimization Techniques and Applications, Thiagarajar College of
Engineering, Madurai, July 2- 3, 1992. 7. XVI National Systems Conference (NSC‘ 92), February 17-19, 1993, College of Engineering,
Anna University, Chennai. 8. 8
th ISME Conference on Mechanical Engineering, March 5 - 6, March 1993, IIT, New Delhi.
9. International Conference on CAD/CAM, Robotics and Autonomous Factories, IIT, New Delhi,
December 16 -19, 1993. 10. International Conference on Materials Management and Inventory Control Sponsored by the
International Society for Inventory Research (ISIR), January 3 - 7, 1994, Dr.G.R.Damodaran College of science, Coimbatore.
11. International Conference on Stochastic models, optimization techniques and computer
applications, PSG College of technology, Coimbatore, December 15 - 17, 1994. 12. UGC Workshop on Examination Reforms and Evaluation, November 23 - 25, 1995, PSG College
of Arts and Science, Coimbatore. 13. International Conference on Bio-Medical Engineering, 15
th Conference of Bio-Medical Society of
India, Coimbatore Institute of Technology, Coimbatore, December 12 - 14, 1996. 14. AICTE sponsored National Seminar on Autonomous Working of Engineering Colleges, PSG
College of Technology, Coimbatore, December 19 - 20, 1996. 15. ISTE Tamil Nadu and Pondicherry Section First Annual convention - 01.08.1998, Kongu
Engineering College, Perundurai. 16. 14
th International Conference on CAD/CAM, Robotics & Factories of the Future - November 30
th
to 3rd
December 1998, PSG College of Technology, Coimbatore
47
17. Workshop on Process Modelling Application for Steel Industries, September 8 - 10, 1999, IISc, Bangalore.
18. CSM - CAE 2000 Conference on Trends and Technologies in Engineering Simulation –
November 8 - 10, 2000, organized by CSM Software Private Ltd., Bangalore in association with MSC Software Corporation, USA and Computational Dynamics, UK.
19. National Conference on Computer Integrated Design & Manufacturing (NCCIDM), Amrita Institute
of Technology and Science, Coimbatore, May 14 - 15, 2001. 20. International Conference in Business Management and Information Sciences, ICBMIS 2008,
Naresuan University, Phitsanulok, Thailand, November 5 - 7, 2008. 21. 24
th National Convention of Production Engineers, Institutions of Engineers (India) Thrissur
Center, May 15 -16, 2009.
(Dr. V. SELLADURAI)
top related