rev a. magnetic level gauge with level transmitter datasheet.pdf
Post on 06-Jan-2016
23 Views
Preview:
TRANSCRIPT
-
PETROVIETNAM LOW PRESSURE GAS DISTRIBUTION
JOINT STOCK COMPANY
PROJECT TIEN HAI THAI BINH LOW PRESSURE GAS DISTRIBUTION
PIPELINE SYSTEM
PHASE DEHYDRATION
MAGNETIC LEVEL GAUGE WITH LEVEL TRANSMITTER
A 12/12/2014 Issued for Review TVN LDB NHC
Prepared by Checked by Approved by Checked by Approved by
Rev Date Description Alpha-ECC PVGAS D
Contractor:
ALPHA ECC
Contractors Document Number:
KTA.TB-PAC03-J13-005
Total pages: 5
(Incl. this page)
-
CUSTOMER : PVGAS D
LOCATION : VIETNAM
AREA : BLOCK 102 & 106 - PHASE 1 PROJECT No.
PROJECT : TB-HR LPGD PIPELINE SYSTEM SHEET
1 Tag No.
2 Service
3 P&ID No.
4 Line/Vessel No.
5 Hazardous Area Classification
6 Quantity
7
8 Fluid
9 Phase
10 Operating pressure Barg
11 Operating temperature C
12 Design pressure Barg
13 Design Temperature C
14 Operating differential Pressure mBar
15 Liquid (mixture) density Kg/m3
16 Body or Chamber Material
Magnetic Follower/Float Material
18 Flange Material
Flange Rating
20 Process Connection Type
Conn Size & Location : Upper
22 Conn Size & Location : Lower
Vent / Drain Conn. Type & Size
24 Visible Length
Center To Center Distance
26 Indicator Type
Indicator Scale
28 Indicator Scale Material
Manufacturer
31 Model No.
Service
33 Function
Range
35 Output
Supply Voltage
37 Accuracy
Output Action
39 Mounting
41
Conduit Connection
43 Ex Certification
Mounting
45 Drain and Vent Valves:
NACE Compliant
NOTES : 1. Insulation support/clip shall be provided by Vendor for insulation installed by Purchaser.
2. Refer to P&ID
3. Transmitter shall be supplied with 316 SS, Ex i, ATEX certified plugs for all spare cable entries
4. The rolling magnet type of indication with red and yellow follower.
5 Transmitter enclosure/ casing/ junction box shall be epoxy-coated low copper aluminium.
ITEM/TAG No. LZT-0133
DATA SHEET No. KTA.TB-PAC03-J13-001.02
1 OF 4
INSTRUMENT DATA SHEETMAGNETIC LEVEL GAUGE WITH LEVEL TRANSMITTER
ZONE 2 , GROUP IIA, T3
1 (One)
PR
OC
ES
S D
ET
AIL
S
TEG
Liquid
3.9
70
10
100
GE
NE
RA
L
LG-0133/LZT-0133
Flash Vessel
KTA.TB-PAC03-M07-003
V-101
N/A
1079
ASME 150# RF WN
Flanged
FL
OA
T M
AT
ER
IAL
316SS
17 316SS
316SS
19
23 Flanged 150# RF, DN 20
21 DN50, Side
DN50, Side
IND
ICA
TO
R 1500 mm
25 1500 mm
Magnetic flap
27 Magnetic flap
316 SS
Magnetic Level Gauge and Level Transmitter
Indicate/Transmit
34 0-100%
4-20 mA (2-wire), HART comm. Protocol.
Contacts : No. Form
36 24 V DC
0.1% of full span
38 Increase
Integral Low
40 Enclosure: Material Class Aluminium (Note 5) IP65
42 M20x1.5
EEx:ia IIB T4
OT
HE
R
44 Direct Mounted (Bottom)
3/4" 150# WNRF FLAGNE
46 N/A
TR
AN
SM
ITT
ER
29 VTA
VTA
32
-
CUSTOMER : PVGAS D
LOCATION : VIETNAM
AREA : BLOCK 102 & 106 - PHASE 1 PROJECT No.
PROJECT : TB-HR LPGD PIPELINE SYSTEM SHEET
1 Tag No.
2 Service
3 P&ID No.
4 Line/Vessel No.
5 Hazardous Area Classification
6 Quantity
7
8 Fluid
9 Phase
10 Operating pressure Barg
11 Operating temperature C
12 Design pressure Barg
13 Design Temperature C
14 Operating differential Pressure mBar
15 Liquid (mixture) density Kg/m3
17 Body or Chamber Material
Magnetic Follower/Float Material
19 Flange Material
Flange Rating
21 Process Connection Type
Conn Size & Location : Upper
23 Conn Size & Location : Lower
Vent / Drain Conn. Type & Size
25 Visible Length
Center To Center Distance
27 Indicator Type
Indicator Scale
29 Indicator Scale Material
Manufacturer
31 Model No.
Service
33 Function
Range
35 Output
Supply Voltage
37 Accuracy
Output Action
39 Mounting
41
Conduit Connection
43 Ex Certification
Mounting
45 Drain and Vent Valves:
NACE Compliant
NOTES : 1. Insulation support/clip shall be provided by Vendor for insulation installed by Purchaser.
2. Refer to P&ID
3. Transmitter shall be supplied with 316 SS, Ex i, ATEX certified plugs for all spare cable entries
4. The rolling magnet type of indication with red and yellow follower.
5 Transmitter enclosure/ casing/ junction box shall be epoxy-coated low copper aluminium.
ITEM/TAG No. LZT-0142
DATA SHEET No. KTA.TB-PAC03-J13-005.02
2 OF 4
INSTRUMENT DATA SHEETMAGNETIC LEVEL GAUGE WITH LEVEL TRANSMITTER
ZONE 2 , GROUP IIA, T3
1 (One)
PR
OC
ES
S D
ET
AIL
S
TEG
Liquid
0.20
43-93.4
7.5
100
GE
NE
RA
L
LZT-0142
Glycol Surge Drum
KTA.TB-PAC03-M07-004
V-103
N/A
1066.1
FL
OA
T M
AT
ER
IAL
316SS
18 316SS
316SS
20 ASME 150# RF WN
Flanged
22 DN50, Side
DN50, Side
24 Flanged 150# RF, DN 20
0.1% of full span
28 Magnetic flap
316 SS
TR
AN
SM
ITT
ER
30 VTA
VTA
32 Magnetic Level Gauge and Level Transmitter
Indicate/Transmit
IND
ICA
TO
R 1900 mm
26 1900 mm
Magnetic flap
34 0-100%
4-20 mA (2-wire), HART comm. Protocol.
36 24 V DC
38 Increase
Integral Low
40 Enclosure: Material Class Aluminium (Note 5) IP65
Contacts : No. Form
42 M20x1.5
EEx:ia IIB T4
OT
HE
R
44 Direct Mounted (Bottom)
3/4" 150# WNRF FLAGNE
46 N/A
-
CUSTOMER : PVGAS D
LOCATION : VIETNAM
AREA : BLOCK 102 & 106 - PHASE 1 PROJECT No.
PROJECT : TB-HR LPGD PIPELINE SYSTEM SHEET
1 Tag No.
2 Service
3 P&ID No.
4 Line/Vessel No.
5 Hazardous Area Classification
6 Quantity
7
8 Fluid
9 Phase
10 Operating pressure Barg
11 Operating temperature C
12 Design pressure Barg
13 Design Temperature C
14 Operating differential Pressure mBar
15 Liquid (mixture) density Kg/m3
17 Body or Chamber Material
Magnetic Follower/Float Material
19 Flange Material
Flange Rating
21 Process Connection Type
Conn Size & Location : Upper
23 Conn Size & Location : Lower
Vent / Drain Conn. Type & Size
25 Visible Length
Center To Center Distance
27 Indicator Type
Indicator Scale
29 Indicator Scale Material
Manufacturer
31 Model No.
Service
33 Function
Range
35 Output
Supply Voltage
37 Accuracy
Output Action
39 Mounting
41
Conduit Connection
43 Ex Certification
Mounting
45 Drain and Vent Valves:
NACE Compliant
NOTES : 1. Insulation support/clip shall be provided by Vendor for insulation installed by Purchaser.
2. Refer to P&ID
3. Transmitter shall be supplied with 316 SS, Ex i, ATEX certified plugs for all spare cable entries
4. The rolling magnet type of indication with red and yellow follower.
5 Transmitter enclosure/ casing/ junction box shall be epoxy-coated low copper aluminium.
ITEM/TAG No. LZT-0172
DATA SHEET No. KTA.TB-PAC03-J13-005.02
3 OF 4
INSTRUMENT DATA SHEETMAGNETIC LEVEL GAUGE WITH LEVEL TRANSMITTER
ZONE 2 , GROUP IIA, T3
1 (One)
PR
OC
ES
S D
ET
AIL
S
Water
Liquid
0.30
37
7.5
100
GE
NE
RA
L
LZT-0172
Flash Vessel
KTA.TB-PAC03-M07-007
V-104
N/A
993.4
FL
OA
T M
AT
ER
IAL
316SS
18 316SS
316SS
20 ASME 150# RF WN
Flanged
22 DN50, Side
DN50, Side
24 Flanged 150# RF, DN 20
0.1% of full span
28 Graduated in%
316 SS
TR
AN
SM
ITT
ER
30 VTA
VTA
32 Magnetic Level Gauge and Level Transmitter
Indicate/Transmit
IND
ICA
TO
R 800 mm
26 800 mm
Magnetic flap
34 0-100%
4-20 mA (2-wire), HART comm. Protocol.
36 24 V DC
38 Increase
Integral Low
40 Enclosure: Material Class Aluminium (Note 5) IP65
Contacts : No. Form
42 M20x1.5
EEx:ia IIB T4
OT
HE
R
44 Direct Mounted (Bottom)
3/4" 150# WNRF FLAGNE
46 N/A
-
CUSTOMER : PVGAS D ITEM/TAG No.
LOCATION : VIETNAM DATA SHEET No. KTA.TB-PAC03-J13-005.02
AREA : BLOCK 102 & 106 - PHASE 1 PROJECT No. AL-3098
PROJECT : TBHR GAS DISTRIBUTION AND GATHERING SHEET 4 OF 4
GENERAL NOTES
1. Documentation Required:
Hazardous Area Certificate - ATEX certification
Ingress Protection Certificate
Hydrotest Certificate
Calibration Certificate
Material Certificate, ISO-EN 10204, Type 3.1 (B) for pressure retaining parts.
Installation & Commissioning spare Parts List and 2 years Operational Spares List
Compliance/ Conformance Certificate
General Arrangement drawing with complete Model Numbers, Dimension and Hookup details
2. All instruments shall be provided with a SS 316 name plate with tag no. pernamently inscribed
3 Level transmitters and accessories shall be able to sustain process design pressure, temperature and service fluid.
4 Level transmitters and accessories should meet the following specifications:
Specification for instrumentation KTA.TB-PAC03-M65-007
5 Elastomer used in the instrument / accessories are compatible with the service fluid specified at design conditions.
6 All tube fittings shall be SS316, of Swagelok make, imperial size, double compression type.
7 Field bus based transmitter/ devices must satisfy the requirements of the field bus registration laboratory with applicable checkmark of foundation field bus.
8 The field bus instruments in hazardous area shall be certified as per entity concept or shall be FISCO approved.
9 Internal software shall be configured by the vendor including the following information such as serial number, Device Tag (Tag Number) and Process description.
10 Bolts/nut ASTM A193 Gr.B7/A194-2H with xylan flourocarbon coated
INSTRUMENT DATA SHEET
MAGNETIC LEVEL GAUGE WITH LEVEL TRANSMITTER- NOTES
VALVES SPECIFICATIONATION SHEETVALVES SPECIFICATIONATION SHEETVALVES SPECIFICATIONATION SHEETVALVES SPECIFICATIONATION SHEET
-
CUSTOMER : PVGAS D ITEM/TAG No. LIT-0111
LOCATION : VIETNAM DATA SHEET No. KTA.TB-PAC03-J13-005.02
AREA : BLOCK 102 & 106 - PHASE 1 PROJECT No. AL-3098
PROJECT : TB-HR LPGD PIPELINE SYSTEM SHEET 1 OF 10
1 Tag No.
2 Service
3 P&ID No.
4 Line/Vessel No.
5 Hazardous Area Classification
6 Quantity
7
8 Fluid
9 Phase
10 Operating pressure Barg
11 Operating temperature C
12 Design pressure Barg
13 Design Temperature C
14 Operating differential Pressure mBar
15 Liquid (mixture) density Kg/m3
16 Vapour density Kg/m3
Body or Chamber Material
Magnetic Follower/Float Material
Flange Material
Flange Rating
Process Connection Type
Conn Size & Location : Upper
Conn Size & Location : Lower
Vent / Drain Conn. Type & Size
Visible Length
Center To Center Distance
Indicator Type
Indicator Scale
Indicator Scale Material
31 Manufacturer
32 Model No.
33 Service
34
35
36
37 Supply Voltage
38
39 Output Action
40
41 Enclosure: Material
30 Contacts : No.
34 Conduit Connection
35 Ex Certification
36 Mounting
37 Drain and Vent Valves:
38 NACE Compliant
39
NOTES : 1. Insulation support/clip shall be provided by Vendor for insulation installed by Purchaser.
2. Refer to P&ID
3. Transmitter shall be supplied with 316 SS, Ex i, ATEX certified plugs for all spare cable entries
4. The rolling magnet type of indication with red and yellow follower.
5 Transmitter enclosure/ casing/ junction box shall be epoxy-coated low copper aluminium.
Increase
Integral Low
M20x1.5
EEx:ia IIB T4
Aluminium (Note 5)
Indicate/Transmit
0-100%
4-20 mA (2-wire), HART comm. Protocol.
24 V DC
0.1% of full span
VTA
VTA
Magnetic Level Gauge and Level Transmitter
316 SS
316 SS
316 SS
ASME 600# RF WN
Flanged
DN50, Side
DN50 Side
Flanged 600# RF, DN 20
40
65
N/A
1093.5
9.41
OT
HE
R
Direct Mounted (Bottom )
3/4" 600# WNRF FLAGNE
N/A
INSTRUMENT DATA SHEETMAGNETIC LEVEL GAUGE WITH LEVEL TRANSMITTER
GE
NE
RA
LP
RO
CE
SS
DE
TA
ILS
TR
AN
SM
ITT
ER
TEG
Liquid
1 (One)
ZONE 2, GROUP IIA, T3
C-101
KTA.TB-PAC03-M07-001
Glycol Contactor C-101
LG-0111/LIT-0111
11.8 - 33.57
17.3 - 42.3
IP65
26
27
Mounting
Class
Form
Function
Range
Output
Accuracy
21
22
23
24
25
FL
OA
T M
AT
ER
IAL
IND
ICA
TO
R
1320mm
1320mm
Magnetic flap
Graduated in%
316 SS
Function
28
29
30
17
18
19
20
VALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATION
-
CUSTOMER : PVGAS D ITEM/TAG No. LIT-0114
LOCATION : VIETNAM DATA SHEET No. KTA.TB-PAC03-J13-005.02
AREA : BLOCK 102 & 106 - PHASE 1 PROJECT No. AL-3098
PROJECT : TB-HR LPGD PIPELINE SYSTEM SHEET 2 OF 10
1 Tag No.
2 Service
3 P&ID No.
4 Line/Vessel No.
5 Hazardous Area Classification
6 Quantity
7
8 Fluid
9 Phase
10 Operating pressure Barg
11 Operating temperature C
12 Design pressure Barg
13 Design Temperature C
14 Operating differential Pressure mBar
15 Liquid (mixture) density Kg/m3
16 Vapour density Kg/m3
17 Body or Chamber Material
18 Magnetic Follower/Float Material
19 Flange Material
20 Flange Rating
21 Process Connection Type
22 Conn Size & Location : Upper
23 Conn Size & Location : Lower
24 Vent / Drain Conn. Type & Size
25 Visible Length
26 Center To Center Distance
27 Indicator Type
28 Indicator Scale
29 Indicator Scale Material
30
31 Manufacturer
32 Model No.
33 Service
34
35
36
37 Supply Voltage
38
39 Output Action
40
41 Enclosure: Material
42 Contacts : No.
43 Conduit Connection
44 Ex Certification
45 Mounting
46 Drain and Vent Valves:
47 NACE Compliant
48
NOTES : 1. Insulation support/clip shall be provided by Vendor for insulation installed by Purchaser.
2. Refer to P&ID
3. Transmitter shall be supplied with 316 SS, Ex i, ATEX certified plugs for all spare cable entries
4. The rolling magnet type of indication with red and yellow follower.
5 Transmitter enclosure/ casing/ junction box shall be epoxy-coated low copper aluminium.
INSTRUMENT DATA SHEETMAGNETIC LEVEL GAUGE WITH LEVEL TRANSMITTER
GE
NE
RA
L
LG-0114/LIT-0114
Glycol Contactor C-101
KTA.TB-PAC03-M07-001
C-101
ZONE 2, GROUP IIA, T3
1 (One)
PR
OC
ES
S D
ET
AIL
S
Hydrocarbon
Liquid
13.7
34.6 - 36.4
40
65
N/A
716.1 - 994.9
9.41
316 SS
316 SS
TR
AN
SM
ITT
ER
VTA
VTA
Magnetic Level Gauge and Level Transmitter
Indicate/Transmit
0-100%
4-20 mA (2-wire), HART comm. Protocol.
24 V DC
EEx:ia IIB T4
0.1% of full span
Increase
Integral Low
IP65
M20x1.5
OT
HE
R
Direct Mounted (Bottom / Top)
3/4" 600# WNRF FLAGNEe
N/A
316 SS
ASME 600# RF WN
Flanged
DN50, Side
DN50 Side
Flanged 600# RF, DN 20
1000mm(Estimate)
1000mm(Estimate)
Magnetic flap
Graduated in%
316 SSIND
ICA
TO
RF
LO
AT
MA
TE
RIA
L
Function
Range
Output
Accuracy
Mounting
Class
Form
Aluminium (Note 5)
VALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATION
-
CUSTOMER : PVGAS D
LOCATION : VIETNAM
AREA : BLOCK 102 & 106 - PHASE 1 PROJECT No. AL-3098
PROJECT : TB-HR LPGD PIPELINE SYSTEM SHEET
1 Tag No.
2 Service
3 P&ID No.
4 Line/Vessel No.
5 Hazardous Area Classification
6 Quantity
8 Fluid
9 Phase
10 Operating pressure Barg
11 Operating temperature C
12 Design pressure Barg
13 Design Temperature C
14 Operating differential Pressure mBar
15 Liquid (mixture) density Kg/m3
16 Vapour density Kg/m3
17 Body or Chamber Material
18 Magnetic Follower/Float Material
19 Flange Material
20 Flange Rating
21 Process Connection Type
22 Conn Size & Location : Upper
23 Conn Size & Location : Lower
24 Vent / Drain Conn. Type & Size
25 Visible Length
26 Center To Center Distance
27 Indicator Type
28 Indicator Scale
29 Indicator Scale Material
30
31 Manufacturer
32 Model No.
33 Service
34
35
36
37 Supply Voltage
38
39 Output Action
40
41 Enclosure: Material
42 Contacts : No.
43 Conduit Connection
44 Ex Certification
45 Mounting
46 Drain and Vent Valves:
47 NACE Compliant
48
NOTES : 1. Insulation support/clip shall be provided by Vendor for insulation installed by Purchaser.
2. Refer to P&ID
3. Transmitter shall be supplied with 316 SS, Ex i, ATEX certified plugs for all spare cable entries
4. The rolling magnet type of indication with red and yellow follower.
5 Transmitter enclosure/ casing/ junction box shall be epoxy-coated low copper aluminium.
PR
OC
ES
S D
ET
AIL
S
TEG
Liquid
11.8 - 33.57
17.3 - 42.3
40
65
N/A
1093.5
9.41
Flanged 600# RF, DN 20
TR
AN
SM
ITT
ER
VTA
VTA
Magnetic Level Gauge and Level Transmitter
Indicate/Transmit
0-100%
Class
Form
Aluminium (Note 5) IP65
M20x1.5
EEx:ia IIB T4
Function
Range
Output
ITEM/TAG No. LZT-0113
DATA SHEET No. KTA.TB-PAC03-J13-005.02
3 OF 10
4-20 mA (2-wire), HART comm. Protocol.
24 V DC
INSTRUMENT DATA SHEETMAGNETIC LEVEL GAUGE WITH LEVEL TRANSMITTER
GE
NE
RA
L
LG-0113/LZT-0113
Glycol Contactor C-101
KTA.TB-PAC03-M07-001
C-101
ZONE 2, GROUP IIA, T3
1 (One)
IND
ICA
TO
RF
LO
AT
MA
TE
RIA
LO
TH
ER
Direct Mounted (Bottom )
3/4" 600# WNRF FLAGNE
N/A
316 SS
ASME 600# RF WN
Flanged
DN50, Side
DN50 Side
316 SS
316 SS
Mounting
1320mm
1320mm
Magnetic flap
Graduated in%
316 SS
0.1% of full span
Increase
Integral Low
Accuracy
VALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATION
-
CUSTOMER : PVGAS D
LOCATION : VIETNAM
AREA : BLOCK 102 & 106 - PHASE 1 PROJECT No. AL-3098
PROJECT : TB-HR LPGD PIPELINE SYSTEM SHEET
1 Tag No.
2 Service
3 P&ID No.
4 Line/Vessel No.
5 Hazardous Area Classification
6 Quantity
7
8 Fluid
9 Phase
10 Operating pressure Barg
11 Operating temperature C
12 Design pressure Barg
13 Design Temperature C
14 Operating differential Pressure mBar
15 Liquid (mixture) density Kg/m3
16 Vapour density Kg/m3
17 Body or Chamber Material
18 Magnetic Follower/Float Material
19 Flange Material
20 Flange Rating
21 Process Connection Type
22 Conn Size & Location : Upper
23 Conn Size & Location : Lower
24 Vent / Drain Conn. Type & Size
25 Visible Length
26 Center To Center Distance
27 Indicator Type
28 Indicator Scale
29 Indicator Scale Material
30 Manufacturer
31 Model No.
32 Service
33
34
35
36 Supply Voltage
37
38 Output Action
39
40 Enclosure: Material
41 Contacts : No.
42 Conduit Connection
43 Ex Certification
44 Mounting
45 Drain and Vent Valves:
46 NACE Compliant
47
NOTES : 1. Insulation support/clip shall be provided by Vendor for insulation installed by Purchaser.
2. Refer to P&ID
3. Transmitter shall be supplied with 316 SS, Ex i, ATEX certified plugs for all spare cable entries
4. The rolling magnet type of indication with red and yellow follower.
5 Transmitter enclosure/ casing/ junction box shall be epoxy-coated low copper aluminium.
ITEM/TAG No. LZT-0114
DATA SHEET No. KTA.TB-PAC03-J13-005.02
4 OF 10
INSTRUMENT DATA SHEETMAGNETIC LEVEL GAUGE WITH LEVEL TRANSMITTER
ZONE 2, GROUP IIA, T3
1 (One)
PR
OC
ES
S D
ET
AIL
S
Hydrocarbon
Liquid
13.7
34.6 - 36.4
40
65
N/A
GE
NE
RA
L
LG-0114/LZT-0114
Glycol Contactor C-101
KTA.TB-PAC03-M07-001
C-101
716.1 - 994.9
TR
AN
SM
ITT
ER
VTA
VTA
Magnetic Level Gauge and Level Transmitter
Indicate/Transmit
0-100%
4-20 mA (2-wire), HART comm. Protocol.
24 V DC
0.1% of full span
Increase
Integral Low
M20x1.5
EEx:ia IIB T4
Class
Form
Aluminium (Note 5)
9.41
316 SS
316 SS
OT
HE
R
Direct Mounted (Bottom)
3/4" 600# WNRF FLAGNE
N/A
FL
OA
T M
AT
ER
IAL
316 SS
ASME 600# RF WN
Flanged
DN50, Side
DN50 Side
Flanged 600# RF, DN 20
IND
ICA
TO
R 800mm
800mm
Magnetic flap
Graduated in%
316 SS
IP65
Function
Range
Output
Accuracy
Mounting
VALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATION
-
CUSTOMER : PVGAS D
LOCATION : VIETNAM
AREA : BLOCK 102 & 106 - PHASE 1 PROJECT No. AL-3098
PROJECT : TB-HR LPGD PIPELINE SYSTEM SHEET
1 Tag No.
2 Service
3 P&ID No.
4 Line/Vessel No.
5 Hazardous Area Classification
6 Quantity
7
8 Fluid
9 Phase
10 Operating pressure Barg
11 Operating temperature C
12 Design pressure Barg
13 Design Temperature C
14 Operating differential Pressure mBar
15 Liquid (mixture) density Kg/m3
16 Vapour density Kg/m3
17 Body or Chamber Material
18 Magnetic Follower/Float Material
19 Flange Material
20 Flange Rating
21 Process Connection Type
22 Conn Size & Location : Upper
23 Conn Size & Location : Lower
24 Vent / Drain Conn. Type & Size
25 Visible Length
26 Center To Center Distance
27 Indicator Type
28 Indicator Scale
29 Indicator Scale Material
30 Manufacturer
31 Model No.
32 Service
33
34
35
36 Supply Voltage
37
38 Output Action
39
40 Enclosure: Material
41 Contacts : No.
42 Conduit Connection
45 Ex Certification
46 Mounting
47 Drain and Vent Valves:
48 NACE Compliant
49
NOTES : 1. Insulation support/clip shall be provided by Vendor for insulation installed by Purchaser.
2. Refer to P&ID
3. Transmitter shall be supplied with 316 SS, Ex i, ATEX certified plugs for all spare cable entries
4. The rolling magnet type of indication with red and yellow follower.
5 Transmitter enclosure/ casing/ junction box shall be epoxy-coated low copper aluminium.
ITEM/TAG No. LIT-0131
DATA SHEET No. KTA.TB-PAC03-J13-005.02
5 OF 10
INSTRUMENT DATA SHEETMAGNETIC LEVEL GAUGE WITH LEVEL TRANSMITTER
ZONE 2, GROUP IIA, T3
1 (One)
PR
OC
ES
S D
ET
AIL
S
Hydrocarbon
Liquid
3.9
70
10
100
N/A
GE
NE
RA
L
LG-0131/LIT-0131
Flash Vessel
KTA.TB-PAC03-M07-003
V-101
700
TR
AN
SM
ITT
ER
VTA
VTA
Magnetic Level Gauge and Level Transmitter
Indicate/Transmit
0-100%
4-20 mA (2-wire), HART comm. Protocol.
24 V DC
0.1% of full span
Increase
Integral Low
M20x1.5
EEx:ia IIB T4
Function
Range
Output
4.75
OT
HE
R
Direct Mounted (Bottom / Top)
3/4" 600# WNRF FLAGNE
N/A
DN50, Side
DN50 Side
Flanged 150# RF, DN 20
FL
OA
T M
AT
ER
IAL
IND
ICA
TO
R 850mm
850mm
Magnetic flap
316 SS
316 SS
316 SS
ASME 150# RF WN
Flanged
Graduated in%
316 SS
IP65
Accuracy
Mounting
Class
Form
Aluminium (Note 5)
VALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATION
-
CUSTOMER : PVGAS D
LOCATION : VIETNAM
AREA : BLOCK 102 & 106 - PHASE 1 PROJECT No. AL-3098
PROJECT : TB-HR LPGD PIPELINE SYSTEM SHEET
1 Tag No.
2 Service
3 P&ID No.
4 Line/Vessel No.
5 Hazardous Area Classification
6 Quantity
8 Fluid
9 Phase
10 Operating pressure Barg
11 Operating temperature C
12 Design pressure Barg
13 Design Temperature C
14 Operating differential Pressure mBar
15 Liquid (mixture) density Kg/m3
16 Vapour density Kg/m3
19 Body or Chamber Material
20 Magnetic Follower/Float Material
21 Flange Material
22 Flange Rating
23 Process Connection Type
24 Conn Size & Location : Upper
25 Conn Size & Location : Lower
26 Vent / Drain Conn. Type & Size
27 Visible Length
28 Center To Center Distance
29 Indicator Type
30 Indicator Scale
31 Indicator Scale Material
32 Manufacturer
33 Model No.
34 Service
35
36
37
38 Supply Voltage
39
40 Output Action
41
42 Enclosure: Material
43 Contacts : No.
44 Conduit Connection
45 Ex Certification
46 Mounting
47 Drain and Vent Valves:
48 NACE Compliant
49
NOTES : 1. Insulation support/clip shall be provided by Vendor for insulation installed by Purchaser.
2. Refer to P&ID
3. Transmitter shall be supplied with 316 SS, Ex i, ATEX certified plugs for all spare cable entries
4. The rolling magnet type of indication with red and yellow follower.
5 Transmitter enclosure/ casing/ junction box shall be epoxy-coated low copper aluminium.
ITEM/TAG No. LIT-0132
DATA SHEET No. KTA.TB-PAC03-J13-005.02
6 OF 10
INSTRUMENT DATA SHEETMAGNETIC LEVEL GAUGE WITH LEVEL TRANSMITTER
ZONE 2, GROUP IIA, T3
1 (One)
PR
OC
ES
S D
ET
AIL
S
TEG
Liquid
3.9
70
10
100
N/A
GE
NE
RA
L
LG-0132/LIT-0132
Flash Vessel
KTA.TB-PAC03-M07-003
V-101
1079
M20x1.5
EEx:ia IIB T4
4.75
TR
AN
SM
ITT
ER
VTA
VTA
Magnetic Level Gauge and Level Transmitter
Indicate/Transmit
0-100%
4-20 mA (2-wire), HART comm. Protocol.
24 V DC
0.1% of full span
Increase
Integral Low
FL
OA
T M
AT
ER
IAL
316 SS
OT
HE
R
Direct Mounted (Bottom)
3/4" 600# WNRF FLAGNE
N/A
316 SS
316 SS
ASME 150# RF WN
Flanged
DN50, Side
DN50 Side
Flanged 150# RF, DN 20
IND
ICA
TO
R 1500mm
1500mm
Magnetic flap
Graduated in%
316 SS
Class
Form
Aluminium (Note 5) IP65
Function
Range
Output
Accuracy
Mounting
VALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATION
-
CUSTOMER : PVGAS D
LOCATION : VIETNAM
AREA : BLOCK 102 & 106 - PHASE 1 PROJECT No. AL-3098
PROJECT : TB-HR LPGD PIPELINE SYSTEM SHEET
1 Tag No.
2 Service
3 P&ID No.
4 Line/Vessel No.
5 Hazardous Area Classification
6 Quantity
7
8 Fluid
9 Phase
10 Operating pressure Barg
11 Operating temperature C
12 Design pressure Barg
13 Design Temperature C
14 Operating differential Pressure mBar
15 Liquid (mixture) density Kg/m3
16 Body or Chamber Material
17 Magnetic Follower/Float Material
18 Flange Material
19 Flange Rating
20 Process Connection Type
21 Conn Size & Location : Upper
22 Conn Size & Location : Lower
23 Vent / Drain Conn. Type & Size
24 Visible Length
25 Center To Center Distance
26 Indicator Type
27 Indicator Scale
28 Indicator Scale Material
29 Manufacturer
30 Model No.
31 Service
32
33
34
35 Supply Voltage
36
37 Output Action
38
39 Enclosure: Material
40 Contacts : No.
41 Conduit Connection
42 Ex Certification
43 Mounting
44 Drain and Vent Valves:
45 NACE Compliant
46
NOTES : 1. Insulation support/clip shall be provided by Vendor for insulation installed by Purchaser.
2. Refer to P&ID
3. Transmitter shall be supplied with 316 SS, Ex i, ATEX certified plugs for all spare cable entries
4. The rolling magnet type of indication with red and yellow follower.
5 Transmitter enclosure/ casing/ junction box shall be epoxy-coated low copper aluminium.
IP65
Accuracy
Mounting
Class
Form
Aluminium (Note 5)
IND
ICA
TO
RF
LO
AT
MA
TE
RIA
L
316 SS
316 SS
316 SS
ASME 150# RF WN
Flanged
DN50, Side
DN50 Side
Flanged 150# RF, DN 20
900mm
900mm
Magnetic flap
Graduated in%
316 SS
ITEM/TAG No. LIT-0141
DATA SHEET No. KTA.TB-PAC03-J13-005.02
7 OF 10
INSTRUMENT DATA SHEETMAGNETIC LEVEL GAUGE WITH LEVEL TRANSMITTER
ZONE 2, GROUP IIA, T3
1 (One)
PR
OC
ES
S D
ET
AIL
S
TEG
Liquid
0.25
82.4 - 94
7.5
100
N/A
GE
NE
RA
L
LG-0141/LIT-0141
Glycol Surge Drum
KTA.TB-PAC03-M07-004
V-103
1066.1
TR
AN
SM
ITT
ER
VTA
VTA
Magnetic Level Gauge and Level Transmitter
Indicate/Transmit
0-100%
4-20 mA (2-wire), HART comm. Protocol.
24 V DC
0.1% of full span
Increase
Integral Low
Function
Range
Output
M20x1.5
EEx:ia IIB T4
OT
HE
R
Direct Mounted (Bottom)
3/4" 600# WNRF FLAGNE
N/A
VALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATION
-
CUSTOMER : PVGAS D
LOCATION : VIETNAM
AREA : BLOCK 102 & 106 - PHASE 1 PROJECT No. AL-3098
PROJECT : TB-HR LPGD PIPELINE SYSTEM SHEET
1 Tag No.
2 Service
3 P&ID No.
4 Line/Vessel No.
5 Hazardous Area Classification
6 Quantity
7
8 Fluid
9 Phase
10 Operating pressure Barg
11 Operating temperature C
12 Design pressure Barg
13 Design Temperature C
14 Operating differential Pressure mBar
15 Liquid (mixture) density Kg/m3
16 Body or Chamber Material
17 Magnetic Follower/Float Material
18 Flange Material
19 Flange Rating
20 Process Connection Type
21 Conn Size & Location : Upper
22 Conn Size & Location : Lower
23 Vent / Drain Conn. Type & Size
24 Visible Length
25 Center To Center Distance
26 Indicator Type
27 Indicator Scale
28 Indicator Scale Material
29 Manufacturer
30 Model No.
31 Service
32
33
34
35 Supply Voltage
36
37 Output Action
38
39 Enclosure: Material
40 Contacts : No.
41 Conduit Connection
42 Ex Certification
47 Mounting
48 Drain and Vent Valves:
49 NACE Compliant
50
NOTES : 1. Insulation support/clip shall be provided by Vendor for insulation installed by Purchaser.
2. Refer to P&ID
3. Transmitter shall be supplied with 316 SS, Ex i, ATEX certified plugs for all spare cable entries
4. The rolling magnet type of indication with red and yellow follower.
5 Transmitter enclosure/ casing/ junction box shall be epoxy-coated low copper aluminium.
Class
Form
Aluminium (Note 5) IP65
FL
OA
T M
AT
ER
IAL
Function
Range
Output
Accuracy
Mounting
Flanged 150# RF, DN 20
600mm
600mm
Magnetic flap
Graduated in%
316 SSIN
DIC
AT
OR
ASME 150# RF WN
Flanged
DN50, Side
DN50 Side
ITEM/TAG No. LZT-0151
DATA SHEET No. KTA.TB-PAC03-J13-005.02
8 OF 10
INSTRUMENT DATA SHEETMAGNETIC LEVEL GAUGE WITH LEVEL TRANSMITTER
ZONE 2, GROUP IIA, T3
1 (One)
PR
OC
ES
S D
ET
AIL
S
TEG
Liquid
0.30
204
7.5
235
N/A
GE
NE
RA
L
LG-0151/LZT-0151
Glycol Reboiler
KTA.TB-PAC03-M07-005
V-102
969.9
316 SS
316 SS
316 SS
TR
AN
SM
ITT
ER
VTA
VTA
Magnetic Level Gauge and Level Transmitter
Indicate/Transmit
0-100%
4-20 mA (2-wire), HART comm. Protocol.
24 V DC
0.1% of full span
Increase
Integral Low
M20x1.5
EEx:ia IIB T4
OT
HE
R
Direct Mounted (Bottom )
3/4" 600# WNRF FLAGNE
N/A
VALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATION
-
CUSTOMER : PVGAS D
LOCATION : VIETNAM
AREA : BLOCK 102 & 106 - PHASE 1 PROJECT No. AL-3098
PROJECT : TB-HR LPGD PIPELINE SYSTEM SHEET
1 Tag No.
2 Service
3 P&ID No.
4 Line/Vessel No.
5 Hazardous Area Classification
6 Quantity
7
8 Fluid
9 Phase
10 Operating pressure Barg
11 Operating temperature C
12 Design pressure Barg
13 Design Temperature C
14 Operating differential Pressure mBar
15 Liquid (mixture) density Kg/m3
16 Body or Chamber Material
17 Magnetic Follower/Float Material
18 Flange Material
19 Flange Rating
20 Process Connection Type
21 Conn Size & Location : Upper
22 Conn Size & Location : Lower
23 Vent / Drain Conn. Type & Size
24 Visible Length
25 Center To Center Distance
26 Indicator Type
27 Indicator Scale
28 Indicator Scale Material
29 Manufacturer
30 Model No.
31 Service
32
33
34
35 Supply Voltage
36
37 Output Action
38
39 Enclosure: Material
40 Contacts : No.
41 Conduit Connection
42 Ex Certification
43 Mounting
44 Drain and Vent Valves:
45 NACE Compliant
46
NOTES : 1. Insulation support/clip shall be provided by Vendor for insulation installed by Purchaser.
2. Refer to P&ID
3. Transmitter shall be supplied with 316 SS, Ex i, ATEX certified plugs for all spare cable entries
4. The rolling magnet type of indication with red and yellow follower.
5 Transmitter enclosure/ casing/ junction box shall be epoxy-coated low copper aluminium.
IP65
Function
Range
Output
Accuracy
Mounting
IND
ICA
TO
R 800mm
800mm
Magnetic flap
Graduated in%
316 SS
FL
OA
T M
AT
ER
IAL
ASME 150# RF WN
Flanged
DN50, Side
DN50 Side
Flanged 150# RF, DN 20
316 SS
316 SS
316 SS
ITEM/TAG No. LIT-0171
DATA SHEET No. KTA.TB-PAC03-J13-005.02
9 OF 10
INSTRUMENT DATA SHEETMAGNETIC LEVEL GAUGE WITH LEVEL TRANSMITTER
ZONE 2, GROUP IIA, T3
1 (One)
PR
OC
ES
S D
ET
AIL
S
Water
Liquid
0.20
37
7.5
100
N/A
GE
NE
RA
L
LG-0171/LIT-0171
Reflux Drum
KTA.TB-PAC03-M07-007
V-104
993.4
TR
AN
SM
ITT
ER
VTA
VTA
Magnetic Level Gauge and Level Transmitter
Indicate/Transmit
0-100%
4-20 mA (2-wire), HART comm. Protocol.
24 V DC
0.1% of full span
Increase
Integral Low
M20x1.5
EEx:ia IIB T4
Class
Form
Aluminium (Note 5)
OT
HE
R
Direct Mounted (Bottom)
3/4" 600# WNRF FLAGNE
N/A
VALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATIONVALVES SPECIFICATION
-
CUSTOMER : PVGAS D ITEM/TAG No.
LOCATION : VIETNAM DATA SHEET No. KTA.TB-PAC03-J13-005.02
AREA : BLOCK 102 & 106 - PHASE 1 PROJECT No. AL-3098
PROJECT : TB-HR LPGD PIPELINE SYSTEM SHEET 10 OF 10
GENERAL NOTES
1. Documentation Required:
Hazardous Area Certificate - ATEX certification
Ingress Protection Certificate
Hydrotest Certificate
Calibration Certificate (5 points) issued by manufacturer
Material Certificate, ISO-EN 10204, Type 3.1 (B) for pressure retaining parts.
Installation & Commissioning spare Parts List and 2 years Operational Spares List
Compliance/ Conformance Certificate
General Arrangement drawing with complete Model Numbers, Dimension and Hookup details
2. All instruments shall be provided with a SS 316 name plate with tag no. pernamently inscribed
3 Level transmitters and accessories shall be able to sustain process design pressure, temperature and service fluid.
4 Level transmitters and accessories should meet the following specifications:
Specification for instrumentation KTA.TB-PAC03-M65-007
5 Elastomer used in the instrument / accessories are compatible with the service fluid specified at design conditions.
6 All tube fittings shall be SS316, of Swagelok make, imperial size, double compression type.
7 Field bus based transmitter/ devices must satisfy the requirements of the field bus registration laboratory with applicable checkmark of foundation field bus.
8 The field bus instruments in hazardous area shall be certified as per entity concept or shall be FISCO approved.
9 Internal software shall be configured by the vendor including the following information such as serial number, Device Tag (Tag Number) and Process description.
10 Bolts/nut ASTM A193 Gr.B7/A194-2H with xylan flourocarbon coated
INSTRUMENT DATA SHEET
MAGNETIC LEVEL GAUGE WITH LEVEL TRANSMITTER- NOTES
VALVES SPECIFICATIONATION SHEETVALVES SPECIFICATIONATION SHEETVALVES SPECIFICATIONATION SHEETVALVES SPECIFICATIONATION SHEET
top related