rt/rte 340 hendrickson truck - home for truck …...261 hendrickson truck hendrickson truck parts...
Post on 13-Apr-2020
15 Views
Preview:
TRANSCRIPT
260 Reference www.daytonparts.com for continuing updates.
Hendrickson TruckRT/RTE 340RT2/RTE2 340Tandem Suspension
Hend
ricks
onSu
spen
sion
Illus
tratio
n
Key Numbers with an asterisk (*) indicate a kit or assembly.
261
Hendrickson Truck
HendricksonTruck
PartsListing
RT/RTE 340RT2/RTE2 340
Tandem Suspension
KeyNo.
PartNumber Description
No.Req.
OEMReference Remarks
1 See Charts Hanger, Front 22 See Charts Hanger, Rear 23 See Charts Hanger, Extended Leaf 2
�� � 4 338-108 Top Pad 2 350645 See Charts Saddle Bolt Assembly 8 Incl. Washer and Nut
�� � 6 334-101 Set Screw Assembly; ³⁄₄"-10 x 3 ¹⁄₄"Lg. 4 35370-2 Incl. Washer and Nut�� 7 327-106 Spring Pin, 1 ¹⁄₄"OD x 7 ¹¹⁄₃₂"Lg. x ⁵⁄₈" C/E 2 32276 Single Lock�� 327-107 Spring Pin, 1 ³⁄₈"OD x 7 ¹¹⁄₃₂"Lg. x ⁵⁄₈" C/E 2 32277 Single Lock�� 327-437 Spring Pin; 1 ³⁄₈"OD x 6 ⁷⁄₈"Lg. x 5 ³⁄₈" C/C 2 43146 Double Lock
� 8 322-100 Bushing; 1 ¹⁄₄"ID x 1 ¹⁄₂"OD x 4"Lg. 2 30057-7�� 322-101 Bushing; 1 ³⁄₈"ID x 1 ⁵⁄₈"OD x 4"Lg. 2 30057-8�� � 9 334-112 Pin Assembly, Lock 2/4 62-1 Incl. Washer and Nut
334-131 Bolt Assembly; ¹⁄₂"-13 x 4"Lg. 2/4 46825-1 Incl. Bolt and Hdwe.�� 10 334-100 Rebound Assembly; ¹⁄₂"OD x 6 ¹⁄₂"Lg. 2 29828-23 Incl. Roller, Washer and Nut
� 11 338-117 Saddle Assembly; "A" = 6 ³⁄₁₆" 2 31017-23 Casting No. 6611, 46529� � 338-118 Saddle Assembly; "A" = 7 ³⁄₁₆" 2 31017-25 Casting No. 7979, 46138
�� 12 334-102 Cross Tube; 1 ¹⁵⁄₁₆"x 44 ⁷⁄₈"Lg. 1 44642-8� 13 338-123 Saddle Cap; 4" C/C, x 1" Dia. 4 6662
� 14 334-103 Stud Kit; ⁷⁄₈" x 4 ¹⁄₄" 8 7002 Incl. Washer and Nut15 See Charts Beam Assembly 2 Contact Tech Service for Assistance
�� � 16 321-117 Bushing, Beam Center Rubber; Welded Plug 2 6664 Welded in Plug�� � 321-118 Bushing, Beam Center Rubber; Loose Plug 2 22279 Plug Included
� 321-119 Bushing, Beam Center; Rubber 2 29481-5 Severe Duty; Fully Bonded (w/TransverseRods)
17 334-190 Plug, End; 1 ¹⁵⁄₁₆"Dia. x ³⁄₁₆"Thk. 2 2227818 322-104 Bushing Kit, Bronze Center 1 30436 For 2 Beams19 334-104 Sleeve; 2"ID x 2 ³⁄₄"OD x 12"Lg. 2 1468420 322-105 Bushing, Bronze Center; 2 ³⁄₄"ID x 3 ⁵⁄₈"OD x
5 ⁷⁄₈"Lg.2 30240-1 Used w/Sleeve 334-104
� 21 334-105 Seal,;2 ¹¹⁄₁₆"ID x 3 ⁵⁄₈"OD x ¹⁄₄"Thk. 4 3033322 334-106 Washer; 2 ³⁄₄"ID x 4 ⁵⁄₈"OD x ¹⁄₈"Thk. 8 32364
� 23 334-107 Fitting, Grease; 2 ⁵⁄₈"Lg. x ¹⁄₈"-27 NPT 2 30087�� � 24 321-120 Bushing, Beam End Rubber; 5 ¹⁄₄"Lg. 4 6969�� � 321-126 Bushing, Beam End Rubber; 5 ³⁄₄"Lg. 4 45900�� � 25 334-108 Adapter Kit, Solid Adapters 4 45000-13 Use w/5 ¹⁄₄" Bushing�� � 334-109 Adapter Kit, Solid Adapters 4 45000-7 Use w/5 ³⁄₄" Bushing
� 26 334-110 Adapter Kit, Solid/Split Ring Adapters 4 45000-14 Use w/5 ¹⁄₄" Bushing� 334-111 Adapter Kit, Solid/Split Ring Adapters 4 45000-8 Use w/5 ³⁄₄" Bushing
� 27 334-380 Bushing & Adapter Kit 4 34013-48 Incl. 321-120 Bushing, 334-108 Adapter�� 334-381 Bushing & Adapter Kit 4 34013-49 Incl. 321-126 Bushing, 334-109 Adapter
28 SP Torque Rod, Rigid 2 32271-XXX Hendrickson P/N Stamped On Rod; ProvideNo. for Proper Identification; Or Use 345-610and 345-661
29 � Torque Rod, Transverse, Kit 2 60215 Use 345-610 and 345-681�� 30 345-610 Torque Rod End, Female, Straddle Mount AR 66610, 46610 ⁵⁄₈" Bolts, 4 ³⁄₈" Spacing�� 345-661 Torque Rod End, Male, Straddle Mount; 22
¹⁄₂"AR 66661, 46661 ⁵⁄₈" Bolts, 4 ³⁄₈" Spacing
� 345-681 Torque Rod End, Male, Taper Stud; 22 ¹⁄₂" AR 66681, 46681 1 ¹⁄₈"-12, 1.85" Taper� 31 334-638 Plate, Reinforcement 2 45045-3 Torque Rod Plate� 32 338-181 Bracket, Track Rod/Frame 2 22186 For ⁵⁄₈" Bolts
33 — Spring Assembly See Catalog 215 for Details
SP Special Order � Not Serviced by Dayton Parts � Product Illustration/Photo Follows � Popular �� Most PopularReference www.daytonparts.com for continuing updates.
262 Reference www.daytonparts.com for continuing updates.
3
1
2
33, 35
33, 3537
3736 34, 35
2
Transverse Rod
Axle Housing
4
5
67
8Key 9*(1) -
Lock Pin Assembly
Key 9*(2) -Lock Bolt Assembly
Key 10* - Spring ReboundAssembly
Key 30* - Bar PinBolt Kit
Key 32 - Tool Kit
9*
10*
11
12
13
14
1617
18 23
19
21
Center Bushing Kit (Bronze)
Beam End
Adapter Kit
Beam End
Adapter Kit
Beam End Adapter Kit
Beam End Bushing & Adapter Kit
22
22
26
26
25
27
24
15
30*
29, 31
30*
29, 31
28, 29
38
1
Extended Leaf
5
79*
9*
10*
2120
9*
10*10*
10*
A
Hendrickson TruckRT/RTE 380/400/440/460RT2/RTE2 400/460Tandem Suspensions
Hend
ricks
onTr
uck
Susp
ensi
onIll
ustra
tion
Key Numbers with an asterisk (*) indicate a kit or assembly.
263
Hendrickson Truck
HendricksonTruck
PartsListing
RT/RTE 380/400/440/460RT2/RTE2 400/460
Tandem Suspensions
KeyNo.
PartNumber Description
No.Req.
OEMReference Remarks
1 See Charts Hanger, Front 22 See Charts Hanger, Rear 23 See Charts Hanger, Extended Leaf 2
�� � 4 338-108 Top Pad 2 35064 Cast#47880, replaces cast#476185 See Charts Saddle Bolt Assembly 8 Incl. Washer and Nut
�� � 6 334-101 Set Screw Assembly; ³⁄₄"-10 x 3 ¹⁄₄"Lg. 4 35370-2 Incl. Washer and Nut�� 7 327-107 Spring Pin, 1 ³⁄₈"OD x 7 ¹¹⁄₃₂"Lg. x ⁵⁄₈" C/E 2 32277 Single Lock�� 327-437 Spring Pin; 1 ³⁄₈"OD x 6 ⁷⁄₈"Lg. x 5 ³⁄₈" C/C 2 43146 Double Lock�� 8 322-101 Bushing; 1 ³⁄₈"ID x 1 ⁵⁄₈"OD x 4"Lg. 2 30057-8 SRI No. TPK-BM�� � 9 334-112 Pin Assembly, Lock 2 62-1 Incl. Washer and Nut
334-131 Bolt Assembly; ¹⁄₂"-13 x 4"Lg. 4 46825-1 Incl. Bolt and Hdwe.�� 10 334-100 Rebound Assembly; ¹⁄₂"OD x 6 ¹⁄₂"Lg. 2 29828-23 Incl. Roller, Washer and Nut
� 11 338-1398 Saddle Assembly, High Back; "A" = 7 ³⁄₁₆" 2 31017-110 RT2-460; Cast# 57155; Incl. Cap & Studs(Must use cast# 47880 top pad)
� 338-1399 Saddle Assembly, Low Back; "A" = 7 ³⁄₁₆" 2 31017-109 RT2-400; Cast# 57143; Incl. Cap & Studs(Must use cast# 47880 top pad)
� 338-143 Saddle Assembly, Low Back; "A" = 6" 2 31017-22 RT380/400; Cast# 57167, 6658, 42933,13088-2 (Cast#57167 must use cast# 47880top pad)
�� � 338-144 Saddle Assembly, High Back; "A" = 6" 2 31017-96 RT380/400/440/460 Cast# 57457, 45605,13088-2, 35208-1 (Cast#57457 must usecast# 47880 top pad)
338-142 Saddle Assembly 2 31017-6 Cast# 32102-1; Replaced by 338-1398 or338-1399
�� 12 334-113 Cross Tube; 2 ⁷⁄₁₆" x 44 ⁷⁄₈"Lg. 1 44643-9� 13 338-1831 Cap, Saddle 4 58795, 48545
�� 14 334-174 Stud Assembly; ⁷⁄₈"-14/9 x 4 ⁷⁄₈"Lg. 8 6696 Incl. Stud, Lock Nut and Washer15 See Charts Beam Assembly 2 Contact Tech Service for Assistance
�� 16 321-122 Bushing, Beam Center Rubber; Welded Plug 2 5919 380 Series�� 321-123 Bushing, Beam Center Rubber; Loose Plug 2 22282 Plug Included; 380 Series
� 321-124 Bushing, Beam Center Rubber; Welded Plug 2 29438-5 Severe Duty; Fully Bonded (w/TransverseRods)
� 321-243 Bushing, Beam Center Rubber; Welded Plug 2 49400 High Confinement; 400 Series Standard321-244 Bushing, Beam Center Rubber; Loose Plug 2 49600 High Confinement; 400 Series Standard
� 17 334-191 Plug, End; 2 ⁷⁄₈"Dia. x ³⁄₁₆"Thk. 2 22281�� � 18 322-102 Bushing Kit, Bronze Center 1 30437 Incl. Keys 19-23 for 2 Beams; Optional for
RT2-400, RT2-460 Standard322-102A Bushing Kit; Bronze Center 2 34013-54 For 1 Beam
� 19 322-103 Bushing, Bronze Center; 3 ¹⁄₂"ID x 4 ³⁄₄"OD x5 ⁷⁄₈"Lg.
2 30240-2 Optional for RT2-400; RT2-460 Standard
20 334-114 Sleeve, Center; 2 ¹⁄₂"ID x 3 ¹⁄₂"OD x 12"Lg. 2 14685� 21 334-115 Seal; 3 ⁷⁄₁₆"ID x 4 ³⁄₄"OD x ¹⁄₄"Thk. 4 30334
� 22 334-116 Washer; 3 ¹⁄₂"ID x 5 ³⁄₄"OD x ¹⁄₈"Thk. 8 32365� 23 334-107 Fitting, Grease; 2 ⁵⁄₈"Lg. x ¹⁄₈"-27 NPT 2 30087
�� 24 334-381 Bushing & Adapter Kit 4 34013-49 Incl. 321-126 Bushing, 334-109 Adapter� 334-428 Bushing & Adapter Kit 4 34013-50, 34013-73 Incl. 321-242 Bushing & 334-467 Adapter
Assy.�� � 25 321-126 Bushing, Beam End Rubber; 5 ³⁄₄"Lg. 4 45900 380 thru 440 Series
� � 321-242 Bushing, Beam End Rubber; 5 ³⁄₄"Lg. 4 29878-1 460 Series�� � 26 334-109 Adapter Kit, Solid Adapters 4 45000-7 Use w/5 ³⁄₄" Bushing; 380 thru 440 Series
� � 334-467 Adapter Kit 4 21140-34 1" Bolt; for 5 ³⁄₄" Bushings
SP Special Order � Not Serviced by Dayton Parts � Product Illustration/Photo Follows � Popular �� Most Popular
Chart Continues on Page 265
Reference www.daytonparts.com for continuing updates.
264 Reference www.daytonparts.com for continuing updates.
3
1
2
33, 35
33, 3537
3736 34, 35
2
Transverse Rod
Axle Housing
4
5
67
8Key 9*(1) -
Lock Pin Assembly
Key 9*(2) -Lock Bolt Assembly
Key 10* - Spring ReboundAssembly
Key 30* - Bar PinBolt Kit
Key 32 - Tool Kit
9*
10*
11
12
13
14
1617
18 23
19
21
Center Bushing Kit (Bronze)
Beam End
Adapter Kit
Beam End
Adapter Kit
Beam End Adapter Kit
Beam End Bushing & Adapter Kit
22
22
26
26
25
27
24
15
30*
29, 31
30*
29, 31
28, 29
38
1
Extended Leaf
5
79*
9*
10*
2120
9*
10*10*
10*
A
Hendrickson TruckRT/RTE 380/400/440/460RT2/RTE2 400/460Tandem Suspensions
Hend
ricks
onTr
uck
Susp
ensi
onIll
ustra
tion
Key Numbers with an asterisk (*) indicate a kit or assembly.
265
Hendrickson Truck
HendricksonTruck
PartsListing
RT/RTE 380/400/440/460RT2/RTE2 400/460
Tandem Suspensions
KeyNo.
PartNumber Description
No.Req.
OEMReference Remarks
� 27 334-111 Adapter Kit, Solid/Split Ring Adapters 4 45000-8334-127 Adapter, Split Ring Type, 450,480 Series 4 21140-28
� 28 334-830 Service Kit, Bar Pin Bushing; Non Shim 4 34013-87 Incl. (2)334-832 Bolt Kit�� � 29 334-831 Service Kit, Bar Pin Bushing; Shim Type 4 34013-88 Incl. (2)334-832,(2)334-879 Shims
30 334-832 Bolt Assembly; 1"-8 x 6"Lg. Grade 8 8 48941 Incl. Nut & Washers� 31 334-879 Shim; ³⁄₁₆" AR 50130� 334-880 Shim; ¹⁄₈" AR 50131� 334-881 Shim; ³⁄₈" AR 57026
32 SP Bar Pin End Bushing Tool Kit 1 174933 SP Torque Rod, Rigid 2 32271-XXX Hendrickson P/N Stamped On Rod; Provide
No. for Proper Identification; Or Use 345-610and 345-661
34 � Torque Rod, Transverse, Kit 2 60215 Use 345-610 and 345-681345-866 Torque Rod Kit. Straddle Mount AR 60218 Use 345-610 and 345-661
�� 35 345-610 Torque Rod End, Female, Straddle Mount AR 66610, 46610 ⁵⁄₈" Bolts, 4 ³⁄₈" Spacing�� 345-661 Torque Rod End, Male, Straddle Mount; 22
¹⁄₂"AR 66661, 46661 ⁵⁄₈" Bolts, 4 ³⁄₈" Spacing
� 345-681 Torque Rod End, Male, Taper Stud; 22 ¹⁄₂" AR 66681, 46681 1 ¹⁄₈"-12, 1.85" Taper� 36 334-638 Plate, Reinforcement 2 45045-3 Torque Rod Plate� 37 338-181 Bracket, Track Rod/Frame 2 22186 For ⁵⁄₈" Bolts
38 — Spring Assembly See Catalog 215 for Details
SP Special Order � Not Serviced by Dayton Parts � Product Illustration/Photo Follows � Popular �� Most PopularReference www.daytonparts.com for continuing updates.
266 Reference www.daytonparts.com for continuing updates.
Hendrickson TruckRT/RTE 441/480Tandem Suspensions
Hend
ricks
onTr
uck
Susp
ensi
onIll
ustra
tion
Key Numbers with an asterisk (*) indicate a kit or assembly.
267
Hendrickson Truck
HendricksonTruck
PartsListing
RT/RTE 441/480Tandem Suspensions
KeyNo.
PartNumber Description
No.Req.
OEMReference Remarks
1 See Charts Hanger, Front 22 See Charts Hanger, Rear 23 See Charts Hanger, Extended Leaf 2
�� � 4 338-108 Top Pad 2 350645 See Charts Saddle Bolt Assembly 8 Incl. Washer and Nut
�� � 6 334-101 Set Screw Assembly; ³⁄₄"-10 x 3 ¹⁄₄"Lg. 4 35370-2 Incl. Washer and Nut�� 7 327-107 Spring Pin, 1 ³⁄₈"OD x 7 ¹¹⁄₃₂"Lg. x ⁵⁄₈" C/E 2 32277 Single Lock�� 327-437 Spring Pin; 1 ³⁄₈"OD x 6 ⁷⁄₈"Lg. x 5 ³⁄₈" C/C 2 43146 Double Lock�� 8 322-101 Bushing; 1 ³⁄₈"ID x 1 ⁵⁄₈"OD x 4"Lg. 2 30057-8�� � 9 334-112 Pin Assembly, Lock 2/4 62-1 Incl. Washer and Nut
334-131 Bolt Assembly; ¹⁄₂"-13 x 4"Lg. 2/4 46825-1 Incl. Bolt and Hdwe.�� 10 334-100 Rebound Assembly; ¹⁄₂"OD x 6 ¹⁄₂"Lg. 2 29828-23 Incl. Roller, Washer and Nut
� 11 338-161 Saddle Assembly; "A" = 6" 2 31017-53 Casting No. 32796, 13088-2, 35208-1;Reinforced
�� 12 334-113 Cross Tube; 2 ⁷⁄₁₆" x 44 ⁷⁄₈"Lg. 1 44643-9� 13 338-1831 Cap, Saddle 4 58795, 48545
�� 14 334-174 Stud Assembly; ⁷⁄₈"-14/9 x 4 ⁷⁄₈"Lg. 8 6696 Incl. Stud, Lock Nut and Washer15 See Charts Beam Assembly 2 Contact Tech Service for Assistance
�� � 16 322-102 Bushing Kit, Bronze Center 1 30437 For 2 Beams322-102A Bushing Kit; Bronze Center 2 34013-54 For 1 Beam
� 17 322-103 Bushing, Bronze Center; 3 ¹⁄₂"ID x 4 ³⁄₄"OD x5 ⁷⁄₈"Lg.
2 30240-2
18 334-114 Sleeve, Center; 2 ¹⁄₂"ID x 3 ¹⁄₂"OD x 12"Lg. 2 14685� 19 334-115 Seal; 3 ⁷⁄₁₆"ID x 4 ³⁄₄"OD x ¹⁄₄"Thk. 4 30334
� 20 334-116 Washer; 3 ¹⁄₂"ID x 5 ³⁄₄"OD x ¹⁄₈"Thk. 8 32365� 21 334-107 Fitting, Grease; 2 ⁵⁄₈"Lg. x ¹⁄₈"-27 NPT 2 30087
� � 22 334-440 Service Kit, Bronze Beam End Bushing - 4Ends
1 34013-40 4 Ends
� 334-440A Service Kit, Bronze Beam End Bushing - 1End
4
�� 23 334-184 Shaft Kit, Bronze Beam End Incl. Shaft, Slotted Nuts and Ball Seals�� 24 322-109 Bushing Kit, Beam End/Ball Assembly 4 30625-7, 34013-57 Incl. Bushing Halves, Ball and Hdwe.
� 25 334-179 Shaft, Beam End; 1 ³⁄₈"-12 x 9 ⁵⁄₈"Lg. 4 335026 334-180 Nut, Slotted; 1 ³⁄₈"-12 8 8582 Use w/334-179 Shaft
� 27 334-430 Ball Seal 8 4522928 339-105 Maintenance Kit, Walking Beam; Bronze
Center/Bronze Ends1 Components to Rebush 2 Beams
29 — Spring Assembly See Catalog 215 for Details
SP Special Order � Not Serviced by Dayton Parts � Product Illustration/Photo Follows � Popular �� Most PopularReference www.daytonparts.com for continuing updates.
268 Reference www.daytonparts.com for continuing updates.
Hendrickson TruckRT/RTE 450/480/520RT2/RTE2 480/520Tandem Suspensions
Hend
ricks
onTr
uck
Susp
ensi
onIll
ustra
tion
Key Numbers with an asterisk (*) indicate a kit or assembly.
269
Hendrickson Truck
HendricksonTruck
PartsListing
RT/RTE 450/480/520RT2/RTE2 480/520
Tandem Suspensions
KeyNo.
PartNumber Description
No.Req.
OEMReference Remarks
1 See Charts Hanger, Front 22 See Charts Hanger, Rear 23 See Charts Hanger, Extended Leaf 2
�� � 4 338-108 Top Pad 2 350645 See Charts Saddle Bolt Assembly 8 Incl. Washer and Nut
�� � 6 334-101 Set Screw Assembly; ³⁄₄"-10 x 3 ¹⁄₄"Lg. 2 35370-2 Incl. Washer and Nut�� 7 327-107 Spring Pin, 1 ³⁄₈"OD x 7 ¹¹⁄₃₂"Lg. x ⁵⁄₈" C/E 2 32277 Single Lock�� 327-437 Spring Pin; 1 ³⁄₈"OD x 6 ⁷⁄₈"Lg. x 5 ³⁄₈" C/C 2 43146 Double Lock�� 8 322-101 Bushing; 1 ³⁄₈"ID x 1 ⁵⁄₈"OD x 4"Lg. 2 30057-8�� � 9 334-112 Pin Assembly, Lock 2/4 62-1 Incl. Washer and Nut
334-131 Bolt Assembly; ¹⁄₂"-13 x 4"Lg. 2/4 46825-1 Incl. Bolt and Hdwe.�� 10 334-100 Rebound Assembly; ¹⁄₂"OD x 6 ¹⁄₂"Lg. 2 29828-23 Incl. Roller, Washer and Nut
� 11 338-161 Saddle Assembly; "A" = 6" 2 31017-53 Casting No. 32796, 13088-2, 35208-1;Reinforced
� 338-162 Saddle Assembly, High Back; "A" = 7 ³⁄₁₆" 2 31017-77 Casting No. 47665, 47476, 32102-1; For50-239 Spring
�� 12 334-113 Cross Tube; 2 ⁷⁄₁₆" x 44 ⁷⁄₈"Lg. 1 44643-9334-1126 Cross Tube; 46" Lg. 1 7622-3
� 13 338-1831 Cap, Saddle 4 58795, 48545�� 14 334-174 Stud Assembly; ⁷⁄₈"-14/9 x 4 ⁷⁄₈"Lg. 8 6696 Incl. Stud, Lock Nut and Washer
15 See Charts Beam Assembly 2 Contact Tech Service for Assistance� 16 321-124 Bushing, Beam Center Rubber; Welded Plug 2 29438-5 Severe Duty; Fully Bonded (w/Transverse
Rods)�� � 17 322-102 Bushing Kit, Bronze Center 1 30437 For 2 Beams
322-102A Bushing Kit; Bronze Center 1 For 1 Beam� 18 322-103 Bushing, Bronze Center; 3 ¹⁄₂"ID x 4 ³⁄₄"OD x
5 ⁷⁄₈"Lg.2 30240-2
19 334-114 Sleeve, Center; 2 ¹⁄₂"ID x 3 ¹⁄₂"OD x 12"Lg. 2 14685� 20 334-115 Seal; 3 ⁷⁄₁₆"ID x 4 ³⁄₄"OD x ¹⁄₄"Thk. 4 30334
� 21 334-116 Washer; 3 ¹⁄₂"ID x 5 ³⁄₄"OD x ¹⁄₈"Thk. 8 32365� 22 334-107 Fitting, Grease; 2 ⁵⁄₈"Lg. x ¹⁄₈"-27 NPT 2 30087� 23 334-428 Bushing & Adapter Kit 4 34013-50 Incl. 321-242 Bushing & 334-467 Adapter
Assy.� � 24 321-242 Bushing, Beam End Rubber; 5 ³⁄₄"Lg. 4 29878-1 450, 480 Series
321-127 Bushing, Beam End Rubber; 6"Lg. 4 45407 520 Series25 334-126 Adapter, Split Ring Type 520 Series 4 21140-23 Use w/6" Bushing
334-127 Adapter, Split Ring Type, 450,480 Series 4 21140-28 Use w/5 ³⁄₄" Bushing� � 26 334-467 Adapter Kit 4 21140-34 Incl. 1" Bolt; For 5 ³⁄₄" Bushings; 450/480
Series� 27 334-830 Service Kit, Bar Pin Bushing; Non Shim 4 34013-87 Incl. Bar Pin Bushing & Mounting Hardware
�� � 28 334-831 Service Kit, Bar Pin Bushing; Shim Type 4 34013-88 Incl. Bar Pin Bushing, Alignment Shims &Mounting Hdwe.
29 334-832 Bolt Assembly; 1"-8 x 6"Lg. Grade 8 8 48941 Incl. Bolt, Lock Nut & Washers� 30 334-879 Shim; ³⁄₁₆" AR 50130� 334-880 Shim; ¹⁄₈" AR 50131� 334-881 Shim; ³⁄₈" AR 57026
31 SP Bar Pin End Bushing Adapter Tool Kit 1 1749
SP Special Order � Not Serviced by Dayton Parts � Product Illustration/Photo Follows � Popular �� Most Popular
Chart Continues on Page 271
Reference www.daytonparts.com for continuing updates.
270 Reference www.daytonparts.com for continuing updates.
Hendrickson TruckRT/RTE 450/480/520RT2/RTE2 480/520Tandem Suspensions
Hend
ricks
onTr
uck
Susp
ensi
onIll
ustra
tion
Key Numbers with an asterisk (*) indicate a kit or assembly.
271
Hendrickson Truck
HendricksonTruck
PartsListing
RT/RTE 450/480/520RT2/RTE2 480/520
Tandem Suspensions
KeyNo.
PartNumber Description
No.Req.
OEMReference Remarks
32 SP Torque Rod, Rigid 2 32271-XXX Hendrickson P/N Stamped On Rod; ProvideNo. for Proper Identification; Or Use 345-610and 345-661
33 � Torque Rod, Transverse, Kit 2 60215 Use 345-610 and 345-681345-866 Torque Rod Kit, Straddle Mount AR 60218 Use 345-610 and 345-661
�� 34 345-610 Torque Rod End, Female, Straddle Mount AR 66610, 46610 ⁵⁄₈" Bolts, 4 ³⁄₈" Spacing�� 345-661 Torque Rod End, Male, Straddle Mount; 22
¹⁄₂"AR 66661, 46661 ⁵⁄₈" Bolts, 4 ³⁄₈" Spacing
� 345-681 Torque Rod End, Male, Taper Stud; 22 ¹⁄₂" AR 66681, 46681 1 ¹⁄₈"-12, 1.85" Taper� 35 334-638 Plate, Reinforcement AR 45045-3 Torque Rod Plate� 36 338-181 Bracket, Track Rod/Frame 2 22186 For ⁵⁄₈" Bolts
37 — Spring Assembly See Catalog 215 for Details
SP Special Order � Not Serviced by Dayton Parts � Product Illustration/Photo Follows � Popular �� Most PopularReference www.daytonparts.com for continuing updates.
272 Reference www.daytonparts.com for continuing updates.
Key 12* -Lock Bolt Assembly
1
4
11*11*
13*
13*
13*
13* 13*
13*
31
30
30
29
29
14
14
5
7
6
10
11*
8
15
16
18
17
19
24
Beam End Adapter Kit
Adapter, Split Ring Type
27
26
28
32
3
7
9
9
9
12*
12*
12* 2
11*
Key 11* -Lock Pin Assembly
Key 13* - Spring ReboundAssembly
25
2122
24
Center Bushing Kit (Bronze)23
2324
A
Hendrickson TruckRT 650Tandem Suspension
Hend
ricks
onTr
uck
Susp
ensi
onIll
ustra
tion
Key Numbers with an asterisk (*) indicate a kit or assembly.
273
Hendrickson Truck
HendricksonTruck
PartsListing
RT 650Tandem Suspension
KeyNo.
PartNumber Description
No.Req.
OEMReference Remarks
1 See Charts Hanger, Front, LH/RH 2 Various Provide Casting Number2 See Charts Hanger, Rear, LH/RH 2 Various Provide Casting Number3 See Charts Hanger, Front 2 Various Provide Casting Number4 See Charts Hanger, Rear 2 Various Provide Casting Number
� 5 338-167 Top Pad 2 19199, 45112 Casting No. 35432 and 48491� 6 334-129 Screw, Set; ³⁄₄"-10 x 2"Lg. 4 19201-2
7 See Charts Saddle Bolt Assembly 8 Incl. Washer and Nut8 338-1899 Saddle Assembly; "A" = 7 1/8" 2 31017-4 Casting No’s 15784,46895
SP Saddle Assembly; "A" = 9 3/8" 2 31017-71 Casting No’s 15784,46673-1SP Saddle Assembly; "A" = 10 1/8" 2 31017-70 Casting No’s 15784,46673-2SP Saddle Assembly; "A" = 11 1/8" 2 31017-69 Casting No’s 15784,46673-2
9 327-108 Spring Pin, 1 ¹⁄₂"OD x 7 ³³⁄₆₄"Lg. x ⁵⁄₈" C/E 4 00005-000 Front and Rear Hangers; Single Lock327-109 Spring Pin, 1 ¹⁄₂"OD x 8 ¹⁷⁄₃₂"Lg. x 7 ¹⁄₈" C/C 2 45797 Front Hanger Only; Double Lock
10 322-106 Bushing; 1 ¹⁄₂"ID 2 22285 Bi-Metal11 334-130 Lock Pin Assembly 4 81-1 Incl. Washer and Nut12 334-131 Bolt Assembly; ¹⁄₂"-13 x 4"Lg. 4 46825-1 Incl. Bolt and Hdwe.13 334-132 Bolt Kit, Rebound ³⁄₄" x 6 ¹⁄₂"Lg. 2 29828-33 Incl. Spacer Tube14 334-133 Roller, Spring Pin; 1 ¹⁄₂"ID x 3"OD x 4"Lg. 2 00003-0003 Use w/327-108 Pin15 334-134 Tube, Cross; 3" x 40 ³⁄₄"Lg. 1 10397-14
334-189 Cross Tube; 3" x 44 ³⁄₄"Lg. 1 10397-2� 16 338-168 Saddle Cap; 5 ¹⁄₂" C/C x 1" Bolt Holes 4 15785
17 334-187 Stud Assembly; 1 ¹⁄₄"-14/14 X 5 ⁷⁄₈"Lg. 8 Incl. Stud, Washer and Lock Nut18 See Charts Beam Assembly 2 Contact Tech Service for Assistance
� 19 321-128 Bushing, Beam Center Rubber; Welded Plug 2 10366 Welded in Plug� 20 322-107 Bushing Kit, Bronze Center 1 45374 For 2 Beams
21 322-108 Bushing, Bronze Center; 4"ID x 5 ¹⁄₂"OD x 8¹¹⁄₁₆"Lg.
2 30240-5
22 334-136 Sleeve; 3"ID x 4"OD x 15"Lg. 2 25102 Bronze Bushing23 334-137 Washer,Thrust; 4"ID x 6 ¹¹⁄₁₆"OD x ³⁄₁₆"Thk. 4 45261
� 24 334-135 Seal; 4"ID x 5 ¹⁄₂"OD x ³⁄₈"Thk. 4 31577� 25 334-107 Fitting, Grease; 2 ⁵⁄₈"Lg. x ¹⁄₈"-27 NPT 2 30087� 26 321-129 Bushing, Beam End Rubber, 6"Lg. 4 10363� 27 334-138 Adapter Kit, Solid Adapters; 2"OD x 12
⁵⁄₈"Lg., 1 ⁷⁄₈"-12 Thread4 21140-7
� 28 334-141 Adapter Kit w/Tube & Nut; 3"OD x 9 ³⁄₄"Lg. x3"-12 Thread
4 21140-6
29 SP Torque Rod, Rigid 2 45577-XXX Hendrickson P/N Stamped On Rod; ProvideNo. for Proper Identification
� 30 321-238 Bushing, Straddlemount Type 4 4830431 SP Bracket, Torque Rod Frame 2 4601532 — Spring Assembly 2 See Catalog 215 for Details
SP Special Order � Not Serviced by Dayton Parts � Product Illustration/Photo Follows � Popular �� Most PopularReference www.daytonparts.com for continuing updates.
274 Reference www.daytonparts.com for continuing updates.
Hendrickson TruckRU/RUE/U/UE 340U2/UE2 340Tandem Suspensions
Hend
ricks
onTr
uck
Susp
ensi
onIll
ustra
tion
Key Numbers with an asterisk (*) indicate a kit or assembly.
275
Hendrickson Truck
HendricksonTruck
PartsListing
RU/RUE/U/UE 340U2/UE2 340
Tandem Suspensions
KeyNo.
PartNumber Description
No.Req.
OEMReference Remarks
1 See Charts Hanger, Front 22 See Charts Hanger, Rear 23 See Charts Hanger, Extended Leaf 2
� 4 338-124 Top Pad 2 19281-1�� 5 361-100 U-Bolt Kit; Special Bend, Grade 8 4 22303-2 ⁷⁄₈" x 4" X 9" HS�� 6 327-106 Spring Pin, 1 ¹⁄₄"OD x 7 ¹¹⁄₃₂"Lg. x ⁵⁄₈" C/E 2 32276 Single Lock�� 327-107 Spring Pin, 1 ³⁄₈"OD x 7 ¹¹⁄₃₂"Lg. x ⁵⁄₈" C/E 2 32277 Single Lock�� 327-437 Spring Pin; 1 ³⁄₈"OD x 6 ⁷⁄₈"Lg. x 5 ³⁄₈" C/C 2 43146 Double Lock
� 7 322-100 Bushing; 1 ¹⁄₄"ID x 1 ¹⁄₂"OD x 4"Lg. 2 30057-7�� 322-101 Bushing; 1 ³⁄₈"ID x 1 ⁵⁄₈"OD x 4"Lg. 2 30057-8�� � 8 334-112 Pin Assembly, Lock 2 62-1 Incl. Washer and Nut
334-131 Bolt Assembly; ¹⁄₂"-13 x 4"Lg. 2 46825-1 Incl. Bolt and Hdwe.�� 9 334-100 Rebound Assembly; ¹⁄₂"OD x 6 ¹⁄₂"Lg. 2 29828-23 Incl. Roller, Washer and Nut
10 338-131 Saddle Assembly; "A" = 6 ³⁄₁₆" 2 31017-75 Casting No. 43184; Incl. Cap and Stud338-132 Saddle Assembly; "A" = 7 ⁵⁄₁₆" 2 31017-76 Casting No. 43145; Incl. Cap and Stud
�� 11 334-102 Cross Tube; 1 ¹⁵⁄₁₆"x 44 ⁷⁄₈"Lg. 1 44642-8� 12 338-127 Saddle Cap, 4" C/C x ¹³⁄₁₆" Holes 4 19283-2
� 13 334-165 Stud Assembly, ³⁄₄"-16/16 x 4 ¹⁄₈"Lg. 8 23441-4 Incl. Stud, Washer and Lock Nut14 See Charts Beam Assembly 2 Contact Tech Service for Assistance
�� � 15 321-117 Bushing, Beam Center Rubber; Welded Plug 2 6664 Welded in Plug�� � 321-118 Bushing, Beam Center Rubber; Loose Plug 2 22279 Plug Included
16 334-190 Plug, End; 1 ¹⁵⁄₁₆"Dia. x ³⁄₁₆"Thk. 2 22278� 17 334-380 Bushing & Adapter Kit 4 34013-48 Incl. 321-120 Bushing, 334-108 Adapter
�� 334-381 Bushing & Adapter Kit 4 34013-49 Incl. 321-126 Bushing, 334-109 Adapter�� � 18 321-120 Bushing, Beam End Rubber; 5 ¹⁄₄"Lg. 4 6969�� � 321-126 Bushing, Beam End Rubber; 5 ³⁄₄"Lg. 4 45900�� � 19 334-108 Adapter Kit, Solid Adapters 4 45000-13 Use w/5 ¹⁄₄" Bushing�� � 334-109 Adapter Kit, Solid Adapters 4 45000-7 Use w/5 ³⁄₄" Bushing
� 20 334-110 Adapter Kit, Solid/Split Ring Adapters 4 45000-14 Use w/5 ¹⁄₄" Bushing� 334-111 Adapter Kit, Solid/Split Ring Adapters 4 45000-8 Use w/5 ³⁄₄" Bushing� 21 334-830 Service Kit, Bar Pin Bushing; Non Shim 4 34013-87 Incl. Bar Pin Bushing & Mounting Hdwe.
�� � 22 334-831 Service Kit, Bar Pin Bushing; Shim Type 4 34013-88 Incl. Bar Pin Bushing, Alignment Shims &Mounting Hdwe.
23 334-832 Bolt Assembly; 1"-8 x 6"Lg. Grade 8 8 48941 Incl. Bolt, Lock Nut & Washers� 24 334-879 Shim; ³⁄₁₆" AR 50130� 334-880 Shim; ¹⁄₈" AR 50131� 334-881 Shim; ³⁄₈" AR 57026
25 SP Bar Pin End Bushing Adapter Tool Kit 1 1749� 26 338-181 Bracket, Track Rod/Frame 2 22186 For ⁵⁄₈" Bolts
27 SP Torque Rod, Rigid 2 32271-XXX Hendrickson P/N Stamped On Rod; ProvideNo. for Proper Identification or Use 345-610and 345-661
�� 345-610 Torque Rod End, Female, Straddle Mount AR 66610, 46610 ⁵⁄₈" Bolts, 4 ³⁄₈" Spacing�� 345-661 Torque Rod End, Male, Straddle Mount; 22
¹⁄₂"AR 66661, 46661 ⁵⁄₈" Bolts, 4 ³⁄₈" Spacing
28 — Spring Assembly See Catalog 215 for Details
SP Special Order � Not Serviced by Dayton Parts � Product Illustration/Photo Follows � Popular �� Most PopularReference www.daytonparts.com for continuing updates.
276 Reference www.daytonparts.com for continuing updates.
Hendrickson TruckRS 340Tandem Suspension
Hend
ricks
onTr
uck
Susp
ensi
onIll
ustra
tion
Key Numbers with an asterisk (*) indicate a kit or assembly.
277
Hendrickson Truck
HendricksonTruck
PartsListing
RS 340Tandem Suspension
KeyNo.
PartNumber Description
No.Req.
OEMReference Remarks
1 See Charts Hanger, Rear, LH/RH 4� 2 338-156 Hanger, Overload 2 48523-1 Optional� 3 338-158 Saddle Plate, Overload Cushion 2 20781 Optional
�� � 4 325-100 Load Cushion, Oil Resistant 2 24209 Optional� � 5 325-103 Load Cushion, Color Code Orange 4 48973, 48972, 9047 60 Durometer; Oil Resistant
6 SP Saddle Assembly 2 Specify Casting No. and Height ("A"); Incl. KeyNos. 7, 8, 11, 14, 15
�� 7 321-125 Bushing, Saddle; 2"ID x 4 ¹⁄₈"OD x 4"Lg. 4 19279� 8 338-160 Cap, Saddle Bushing Retainer 4 5917
�� � 9 334-117 Washer; 1 ⁹⁄₁₆"ID x 3 ¹⁄₄"OD x ³⁄₁₆"Thk. 4 8536 ³⁄₈" Flange�� 10 334-118 Nut, Nylok; 1 ¹⁄₂"-12. 4 25151
11 334-144 Stud Assembly; ⁵⁄₈" x 3"Lg. 8 19111-1� 12 334-145 Control Kit; Rebound 2 31005-1 Incl. (2) Bumpers, (2) Nuts
�� 13 334-102 Cross Tube; 1 ¹⁵⁄₁₆"x 44 ⁷⁄₈"Lg. 1 44642-8� 14 338-123 Saddle Cap; 4" C/C, x 1" Dia. 4 6662
15 334-151 Stud Assembly; ⁷⁄₈"-14-9 x 4 ¹⁄₂"Lg. 8 9029 Incl. Stud, Lock Nut and Washer16 SP Beam Assembly 2 Contact Technical Service for Assistance; See
Charts for details�� � 17 321-117 Bushing, Beam Center Rubber; Welded Plug 2 6664 Welded in Plug�� � 321-118 Bushing, Beam Center Rubber; Loose Plug 2 22279 Plug Included
� 321-119 Bushing, Beam Center; Rubber 2 29481-5 Severe Duty; Fully Bonded (w/TransverseRods)
18 334-190 Plug, End; 1 ¹⁵⁄₁₆"Dia. x ³⁄₁₆"Thk. 2 2227819 322-104 Bushing Kit, Bronze Center 1 30436 Incl. Bushing & Keys 20-23; for 2 Beams20 334-104 Sleeve; 2"ID x 2 ³⁄₄"OD x 12"Lg. 2 14684
� 21 334-105 Seal,;2 ¹¹⁄₁₆"ID x 3 ⁵⁄₈"OD x ¹⁄₄"Thk. 4 3033322 334-106 Washer; 2 ³⁄₄"ID x 4 ⁵⁄₈"OD x ¹⁄₈"Thk. 8 32364
� 23 334-107 Fitting, Grease; 2 ⁵⁄₈"Lg. x ¹⁄₈"-27 NPT 2 30087� 24 334-380 Bushing & Adapter Kit 4 34013-48 Incl. 321-120 Bushing, 334-108 Adapter
�� 334-381 Bushing & Adapter Kit 4 34013-49 Incl. 321-126 Bushing, 334-109 Adapter�� � 25 321-120 Bushing, Beam End Rubber; 5 ¹⁄₄"Lg. 4 6969�� � 321-126 Bushing, Beam End Rubber; 5 ³⁄₄"Lg. 4 45900�� � 26 334-108 Adapter Kit, Solid Adapters 4 45000-13 Use w/5 ¹⁄₄" Bushing�� � 334-109 Adapter Kit, Solid Adapters 4 45000-7 Use w/5 ³⁄₄" Bushing
� 27 334-110 Adapter Kit, Solid/Split Ring Adapters 4 45000-14 Use w/5 ¹⁄₄" Bushing� 334-111 Adapter Kit, Solid/Split Ring Adapters 4 45000-8 Use w/5 ³⁄₄" Bushing� 28 338-181 Bracket, Track Rod/Frame 2 22186 For ⁵⁄₈" Bolts
29 SP Torque Rod, Rigid 2 32271-XXX Hendrickson P/N Stamped on Rod; ProvideNo. for Proper Identification; or Use 345-610and 345-661
�� 345-610 Torque Rod End, Female, Straddle Mount AR 66610, 46610 ⁵⁄₈" Bolts, 4 ³⁄₈" Spacing�� 345-661 Torque Rod End, Male, Straddle Mount;
22 ¹⁄₂"AR 66661, 46661 ⁵⁄₈" Bolts, 4 ³⁄₈" Spacing
SP Special Order � Not Serviced by Dayton Parts � Product Illustration/Photo Follows � Popular �� Most PopularReference www.daytonparts.com for continuing updates.
278 Reference www.daytonparts.com for continuing updates.
Hendrickson TruckRS 380/400/440/460Tandem Suspensions
Hend
ricks
onTr
uck
Susp
ensi
onIll
ustra
tion
Key Numbers with an asterisk (*) indicate a kit or assembly.
279
Hendrickson Truck
HendricksonTruck
PartsListing
RS 380/400/440/460Tandem Suspensions
KeyNo.
PartNumber Description
No.Req.
OEMReference Remarks
1 See Charts Hanger, Front & Rear, LH/RH 4� 2 338-156 Hanger, Overload 2 48523-1 Optional� 3 338-158 Saddle Plate, Overload Cushion 2 20781 Optional
�� � 4 325-100 Load Cushion, Oil Resistant 2 24209 Optional� � 5 325-103 Load Cushion, Color Code Orange 4 48973, 48972 60 Durometer; Oil Resistant
�� � 325-104 Load Cushion, Color Code Yellow 4 26953 70 Durometer; Oil Resistant6 338-743 Saddle Assembly; "A" = 12 ¹⁄₄" 2 8606-67 Casting No. 10711-1; Incl. Bushing, Cap and
Stud338-744 Saddle Assembly; "A" = 14" 2 8606-80 Casting No. 10711-2; Incl. Bushing, Cap and
Stud338-745 Saddle Assembly; "A" = 12 ⁷⁄₈" 2 8606-107 Casting No. 10711-5; Incl. Bushing, Cap and
Stud�� 7 321-125 Bushing, Saddle; 2"ID x 4 ¹⁄₈"OD x 4"Lg. 4 19279
� 8 338-160 Cap, Saddle Bushing Retainer 4 5917�� � 9 334-117 Washer; 1 ⁹⁄₁₆"ID x 3 ¹⁄₄"OD x ³⁄₁₆"Thk. 4 8536 ³⁄₈" Flange�� 10 334-118 Nut, Nylok; 1 ¹⁄₂"-12. 4 25151
11 334-144 Stud Assembly; ⁵⁄₈" x 3"Lg. 8 19111-1� 12 334-145 Control Kit; Rebound 2 31005-1 Incl. (2) Bumpers, (2) Nuts
�� 13 334-113 Cross Tube; 2 ⁷⁄₁₆" x 44 ⁷⁄₈"Lg. 1 44643-9� 14 338-1831 Cap, Saddle 4 58795
� 15 334-172 Stud Assembly; ⁷⁄₈"-14/9 x 5 ³⁄₈"Lg. 8 9030 Incl. Stud, Lock Nut and Washer16 See Charts Beam Assembly 2
�� 17 321-122 Bushing, Beam Center Rubber; Welded Plug 2 5919 Welded in Plug; 380 Series�� 321-123 Bushing, Beam Center Rubber; Loose Plug 2 22282 Plug Included; 380 Series
� 321-124 Bushing, Beam Center Rubber; Welded Plug 2 29438-5 Severe Duty; Fully Bonded (w/TransverseRods)
� 321-243 Bushing, Beam Center Rubber; Welded Plug 2 49400 High Confinement, 400 Series Standard321-244 Bushing, Beam Center Rubber; Loose Plug 2 49600 High Confinement, 400 Series Standard
� 18 334-191 Plug, End; 2 ⁷⁄₈"Dia. x ³⁄₁₆"Thk. 2 22281�� � 19 322-102 Bushing Kit, Bronze Center 1 30437 Incl. Keys 20-24 for 2 Beams
322-102A Bushing Kit; Bronze Center 2 34013-54 For 1 Beam� 20 322-103 Bushing, Bronze Center; 3 ¹⁄₂"ID x 4 ³⁄₄"OD x
5 ⁷⁄₈"Lg.2 30240-2
21 334-114 Sleeve, Center; 2 ¹⁄₂"ID x 3 ¹⁄₂"OD x 12"Lg. 2 14685� 22 334-115 Seal; 3 ⁷⁄₁₆"ID x 4 ³⁄₄"OD x ¹⁄₄"Thk. 4 30334
� 23 334-116 Washer; 3 ¹⁄₂"ID x 5 ³⁄₄"OD x ¹⁄₈"Thk. 8 32365� 24 334-107 Fitting, Grease; 2 ⁵⁄₈"Lg. x ¹⁄₈"-27 NPT 2 30087
�� 25 334-381 Bushing & Adapter Kit 4 34013-49 Incl. 321-126 Bushing, 334-109 Adapter� 334-428 Bushing & Adapter Kit 4 34013-50, 34013-73 Incl. 321-242 Bushing & 334-467 Adapter
Assy.�� � 26 321-126 Bushing, Beam End Rubber; 5 ³⁄₄"Lg. 4 45900 380 thru 440 Series
� � 321-242 Bushing, Beam End Rubber; 5 ³⁄₄"Lg. 4 29878-1 460 Series�� � 27 334-109 Adapter Kit, Solid Adapters 4 45000-7 Use w/5 ³⁄₄" Bushing; 380 thru 440 Series
� � 334-467 Adapter Kit 4 21140-34 Incl. 1" Bolt; for 5 ³⁄₄" Bushings; 450/480Series
� 28 334-111 Adapter Kit, Solid/Split Ring Adapters 4 45000-8 Use w/5 ³⁄₄" Bushing� 29 334-830 Service Kit, Bar Pin Bushing; Non Shim 4 34013-87 Incl. Bar Pin Bushing & Mounting Hdwe.
�� � 30 334-831 Service Kit, Bar Pin Bushing; Shim Type 4 34013-88 Incl. Bar Pin Bushing, Alignment Shims &Mounting Hdwe.
SP Special Order � Not Serviced by Dayton Parts � Product Illustration/Photo Follows � Popular �� Most Popular
Chart Continues on Page 281
Reference www.daytonparts.com for continuing updates.
280 Reference www.daytonparts.com for continuing updates.
Hendrickson TruckRS 380/400/440/460Tandem Suspensions
Hend
ricks
onTr
uck
Susp
ensi
onIll
ustra
tion
Key Numbers with an asterisk (*) indicate a kit or assembly.
281
Hendrickson Truck
HendricksonTruck
PartsListing
RS 380/400/440/460Tandem Suspensions
KeyNo.
PartNumber Description
No.Req.
OEMReference Remarks
31 334-832 Bolt Assembly; 1"-8 x 6"Lg. Grade 8 8 48941 Incl. Bolt, Lock Nut & Washers� 32 334-880 Shim; ¹⁄₈" AR 50131� 334-879 Shim; ³⁄₁₆" AR 50130� 334-881 Shim; ³⁄₈" AR 57026
33 SP Bar Pin End Bushing34 339-102 Maintenance Kit, Walking Beam; Welded
Plugs1 Incl. (2) 321-122, (4) 334-381, 2 Beams
339-104 Maintenance Kit, Walking Beam; BronzeCenter/Rubber Ends
1 Incl. (1) 322-102, (4) 334-381, 2 Beams
339-131 Maintenance Kit, Walking Beam; LoosePlugs
1 Incl. (2) 321-123, (4) 334-381, 2 Beams
35 SP Torque Rod, Rigid 2 32271-XXX Hendrickson P/N Stamped on Rod. ProvideNo. for Proper Identification; Or Use 345-610& 345-661
�� 345-610 Torque Rod End, Female, Straddle Mount 2 66610, 46610 ⁵⁄₈" Bolts, 4 ³⁄₈" Spacing�� 345-661 Torque Rod End, Male, Straddle Mount; 22
¹⁄₂"2 66661, 46661 ⁵⁄₈" Bolts, 4 ³⁄₈" Spacing
36 SP Torque Rod, Transverse, Kit 2 50234-000A Use 345-610 & 345-681�� 345-610 Torque Rod End, Female, Straddle Mount 2 46610 ⁵⁄₈" Bolts, 4 ³⁄₈" Spacing
� 345-681 Torque Rod End, Male, Taper Stud; 22 ¹⁄₂" 2 46681 1 ¹⁄₈"-12, 1.85" Taper� 37 334-638 Plate, Reinforcement 2 45045-3 Torque Rod Plate� 38 338-181 Bracket, Track Rod/Frame 2 22186 For ⁵⁄₈" Bolts
SP Special Order � Not Serviced by Dayton Parts � Product Illustration/Photo Follows � Popular �� Most PopularReference www.daytonparts.com for continuing updates.
282 Reference www.daytonparts.com for continuing updates.
Hendrickson TruckRS 450/480/520Tandem Suspensions
Hend
ricks
onTr
uck
Susp
ensi
onIll
ustra
tion
Key Numbers with an asterisk (*) indicate a kit or assembly.
283
Hendrickson Truck
HendricksonTruck
PartsListing
RS 450/480/520Tandem Suspensions
KeyNo.
PartNumber Description
No.Req.
OEMReference Remarks
1 See Charts Hanger, Front & Rear, LH/RH 4 Various� 2 338-156 Hanger, Overload 2 48523-1 With 34" Frame Width� 338-1208 Hanger 2 48525-1 With 34 ¹⁄₂" Frame Width� 3 338-158 Saddle Plate, Overload Cushion 2 20781
�� � 4 325-100 Load Cushion, Oil Resistant 2 24209 Optional�� � 5 325-104 Load Cushion, Color Code Yellow 4 26953 70 Durometer; Oil Resistant
6 SP Saddle Assembly 2 8606-XXX Specify Casting No. and Dim. "A"� 7 334-1125 Bearing Ring 4 50780
�� 8 321-125 Bushing, Saddle; 2"ID x 4 ¹⁄₈"OD x 4"Lg. 4 19279� 9 338-160 Cap, Saddle Bushing Retainer 4 5917
�� � 10 334-117 Washer; 1 ⁹⁄₁₆"ID x 3 ¹⁄₄"OD x ³⁄₁₆"Thk. 4 8536 ³⁄₈" Flange�� 11 334-118 Nut, Nylok; 1 ¹⁄₂"-12. 4 25151
12 334-144 Stud Assembly; ⁵⁄₈" x 3"Lg. 8 19111-1� 13 334-145 Control Kit; Rebound 2 31005-1 Incl. (2) Bumpers, (2) Nuts
�� 14 334-113 Cross Tube; 2 ⁷⁄₁₆" x 44 ⁷⁄₈"Lg. 1 44643-9334-1126 Cross Tube; 46" Lg. 1 7622-3
� 15 338-1831 Cap, Saddle 4 58795� 16 334-172 Stud Assembly; ⁷⁄₈"-14/9 x 5 ³⁄₈"Lg. 8 9030 Incl. Stud, Lock Nut and Washer
17 See Charts Beam Assembly 2� 18 321-124 Bushing, Beam Center Rubber; Welded Plug 2 29438-5 Severe Duty; Fully Bonded (w/Transverse
Rods)�� � 19 322-102 Bushing Kit, Bronze Center 1 30437 Incl. Keys 20-24 for 2 Beams
322-102A Bushing Kit; Bronze Center 34013-54 For 1 Beam� 20 322-103 Bushing, Bronze Center; 3 ¹⁄₂"ID x 4 ³⁄₄"OD x
5 ⁷⁄₈"Lg.2 30240-2
21 334-114 Sleeve, Center; 2 ¹⁄₂"ID x 3 ¹⁄₂"OD x 12"Lg. 2 14685� 22 334-115 Seal; 3 ⁷⁄₁₆"ID x 4 ³⁄₄"OD x ¹⁄₄"Thk. 4 30334
� 23 334-116 Washer; 3 ¹⁄₂"ID x 5 ³⁄₄"OD x ¹⁄₈"Thk. 8 32365� 24 334-107 Fitting, Grease; 2 ⁵⁄₈"Lg. x ¹⁄₈"-27 NPT 2 30087� 25 334-428 Bushing & Adapter Kit 4 34013-50, 34013-73 Incl. 321-242 Bushing & 334-467 Adapter
Assy.� � 26 321-242 Bushing, Beam End Rubber; 5 ³⁄₄"Lg. 4 29878-1 450, 480 Series
321-127 Bushing, Beam End Rubber; 6"Lg. 4 45407 520 Series27 334-126 Adapter, Split Ring Type 520 Series 4 21140-23 Use w/6" Bushing
334-127 Adapter, Split Ring Type, 450,480 Series 4 21140-28 Use w/5 ³⁄₄" Bushing� � 28 334-467 Adapter Kit 4 21140-34 Incl. 1" Bolt; for 5 ³⁄₄" Bushings; 450, 480
Series� 29 334-830 Service Kit, Bar Pin Bushing; Non Shim 4 34013-87 Incl. Bar Pin Bushing & Mounting Hdwe.
�� � 30 334-831 Service Kit, Bar Pin Bushing; Shim Type 4 34013-88 Incl. Bar Pin Bushing, Alignment Shims &Mounting Hdwe.
31 334-832 Bolt Assembly; 1"-8 x 6"Lg. Grade 8 8 48941 Incl. Bolt, Lock Nut & Washers� 32 334-880 Shim; ¹⁄₈" AR 50131� 334-879 Shim; ³⁄₁₆" AR 50130� 334-881 Shim; ³⁄₈" AR 57026
33 SP Bar Pin End Bushing Adapter Tool Kit 1 1749
SP Special Order � Not Serviced by Dayton Parts � Product Illustration/Photo Follows � Popular �� Most Popular
Chart Continues on Page 285
Reference www.daytonparts.com for continuing updates.
284 Reference www.daytonparts.com for continuing updates.
Hendrickson TruckRS 450/480/520Tandem Suspensions
Hend
ricks
onTr
uck
Susp
ensi
onIll
ustra
tion
Key Numbers with an asterisk (*) indicate a kit or assembly.
285
Hendrickson Truck
HendricksonTruck
PartsListing
RS 450/480/520Tandem Suspensions
KeyNo.
PartNumber Description
No.Req.
OEMReference Remarks
34 SP Torque Rod, Rigid 2 32271-XXX Hendrickson P/N Stamped on Rod. ProvideNo. for Proper Identification; Or Use 345-610& 345-661
�� 345-610 Torque Rod End, Female, Straddle Mount AR 66610, 46610 ⁵⁄₈" Bolts, 4 ³⁄₈" Spacing�� 345-661 Torque Rod End, Male, Straddle Mount; 22
¹⁄₂"2 66661, 46661 ⁵⁄₈" Bolts, 4 ³⁄₈" Spacing
35 � Torque Rod, Transverse Kit 2 60215 Use 345-610 and 345-681�� 345-610 Torque Rod End, Female, Straddle Mount 2 66610, 46610 ⁵⁄₈" Bolts, 4 ³⁄₈" Spacing
� 345-681 Torque Rod End, Male, Taper Stud; 22 ¹⁄₂" AR 66681, 46681 1 ¹⁄₈"-12, 1.85" Taper� 36 334-638 Plate, Reinforcement 2 45045-3 Torque Rod Plate� 37 338-181 Bracket, Track Rod/Frame 2 22186 For ⁵⁄₈" Bolts
SP Special Order � Not Serviced by Dayton Parts � Product Illustration/Photo Follows � Popular �� Most PopularReference www.daytonparts.com for continuing updates.
286 Reference www.daytonparts.com for continuing updates.
Hendrickson TruckRS 500/650Tandem Suspensions
Hend
ricks
onTr
uck
Susp
ensi
onIll
ustra
tion
Key Numbers with an asterisk (*) indicate a kit or assembly.
287
Hendrickson Truck
HendricksonTruck
PartsListing
RS 500/650Tandem Suspensions
KeyNo.
PartNumber Description
No.Req.
OEMReference Remarks
1 SP Hanger, Front and Rear, LH/RH 4 Various Provide Casting No, Position & OEM2 SP Hanger, Center 2 Various Provide Casting No. & OEM
�� � 3 325-104 Load Cushion, Color Code Yellow 6 26953 70 Durometer; Oil Resistant4 SP Saddle Assembly 2 Various Provide Casting No. and Height "A"
�� 5 321-125 Bushing, Saddle; 2"ID x 4 ¹⁄₈"OD x 4"Lg. 4 19279� 6 338-160 Cap, Saddle Bushing Retainer 4 5917
�� � 7 334-117 Washer; 1 ⁹⁄₁₆"ID x 3 ¹⁄₄"OD x ³⁄₁₆"Thk. 4 8536 ³⁄₈" Flange�� 8 334-118 Nut, Nylok; 1 ¹⁄₂"-12. 4 25151
� 9 334-145 Control Kit; Rebound 2 31005-1 Incl. (2) Bumpers, (2) Nuts10 334-144 Stud Assembly; ⁵⁄₈" x 3"Lg. 8 19111-111 SP Beam Assembly 2 Various Provide Casting No.12 334-134 Tube, Cross; 3" x 40 ³⁄₄"Lg. 1 10397-14
334-189 Cross Tube; 3" x 44 ³⁄₄"Lg. 1 10397-2� 13 338-168 Saddle Cap; 5 ¹⁄₂" C/C x 1" Bolt Holes 4 15785
14 334-187 Stud Assembly; 1 ¹⁄₄"-14/14 X 5 ⁷⁄₈"Lg. 8 Incl. Stud, Washer and Lock Nut� 15 321-128 Bushing, Beam Center Rubber; Welded Plug 2 10366 Welded in Plug� 16 322-107 Bushing Kit, Bronze Center 1 45374
17 322-108 Bushing, Bronze Center; 4"ID x 5 ¹⁄₂"OD x 8¹¹⁄₁₆"Lg.
2 30240-5
18 334-137 Washer,Thrust; 4"ID x 6 ¹¹⁄₁₆"OD x ³⁄₁₆"Thk. 4 45261� 19 334-107 Fitting, Grease; 2 ⁵⁄₈"Lg. x ¹⁄₈"-27 NPT 2 30087� 20 321-129 Bushing, Beam End Rubber, 6"Lg. 4 10363� 21 334-138 Adapter Kit, Solid Adapters; 2"OD x 12
⁵⁄₈"Lg., 1 ⁷⁄₈"-12 Thread4 21140-7
� 22 334-141 Adapter Kit w/Tube & Nut; 3"OD x 9 ³⁄₄"Lg. x3"-12 Thread
4 21140-6
23 SP Torque Rod, Rigid 2 45577-XXX Hendrickson P/N Stamped on Rod. ProvideNo. for Proper Identification
SP Special Order � Not Serviced by Dayton Parts � Product Illustration/Photo Follows � Popular �� Most PopularReference www.daytonparts.com for continuing updates.
288 Reference www.daytonparts.com for continuing updates.
31
2
11*
11*
12*
9
12*, 13
12*, 14
7*
7*7*7*
17*
7*
5*
12*
11*
5*
6
10
12*, 15*
12*, 15*
16
16
19*
20*
826
5*
11*
11*
11*
21
21
22
2324
25
4
SEE CHECKMARKS
�Key 18* -
(Keys 16, 17, 20, 26)Kit includes Upper and
Lower Brackets
Retrofit Kit,Shock Absorber
�
��
��
�
�
Hendrickson TruckHAULMAAX®
Bolster Spring Suspension
Hend
ricks
onTr
uck
Susp
ensi
onIll
ustra
tion
Key Numbers with an asterisk (*) indicate a kit or assembly.
289
Hendrickson Truck
HendricksonTruck
PartsListing
HAULMAAX®
Bolster Spring Suspension
KeyNo.
PartNumber Description
No.Req.
OEMReference Remarks
1 SP Bracket, Outboard Frame 2 Various Specify make, build date, frame width &thickness, saddle ht, reinforcement thicknessif equipped
� 2 338-1931 Saddle Assembly, 400 Series; After 1/12/03 2 64642 Prior to 1/13/03 must retrofit to currentdesigns
� 338-1932 Saddle Assembly, 460 Series; After 1/12/03 2 64643-2 Prior to 1/13/03 must retrofit to currentdesigns
SP Saddle Retrofit Kit, Prior to 1/13/03 2 Various Specify saddle ht, frame width. Call TechService for assistance.
3 SP Bracket, Inboard Frame 2 Various Specify make, frame width & thickness, w/ orw/o reinforcement
4 SP Spacer (If Equipped) 2 Various Specify frame width & thickness, w/ or w/oreinforcement
� � 5 334-1727 Service Kit, Bolster Spring 4 64179-2� 6 334-1719 Wear Plate Kit 4 64179-5
� � 7 334-1720 Auxiliary Spring Kit 2 64179-4� 8 338-1933 Plate, Auxiliary Spring Contact 2 59191-1, 59191� 9 338-1934 Bracket, Auxiliary Spring 2 59384� 10 334-1728 Shim, Auxiliary Spring; ¹⁄₄"Thk. 6 60791
� 11 334-1721 Fastener Kit, Saddle 1 64179-29 Incl. Necessary hardware to attach 2 saddlesto frame brackets
� � 12 334-1722 Strap Kit, Rebound 2 64179-2813 334-1634 Strap, Rebound 2 57878-314 334-1729 Clip, Rebound Strap 2 6061215 334-1723 Bolt Assembly; ³⁄₄"-16 x 6"Lg. 216 341-60680-4 Shock Absorber 4 60680-4 16 ¹⁄₂" saddle ht.
341-60680-5 Shock Absorber 4 60680-5 17 ¹⁄₂" - 18 ¹⁄₂" saddle ht.17 334-1724 Bolt Assembly; ⁵⁄₈"-11 x 3 ¹⁄₄"Lg. 4 60680-518 334-1725 Retrofit Kit, Shock Absorber 1 64178-3 16 ¹⁄₂" saddle ht.
334-1726 Retrofit Kit, Shock Absorber 1 64178-4 17 ¹⁄₂" - 18 ¹⁄₂" saddle ht.�� � 19 334-831 Service Kit, Bar Pin Bushing; Shim Type 4 34013-88 Incl. bushing, shims, hardware
20 334-832 Bolt Assembly; 1"-8 x 6"Lg. Grade 8 821 SP Torque Rod 2 Various Use 345-610 + 345-66122 SP Track Rod 2 Various Use 345-610 + 345-68123 338-874 Bracket, Track Rod Axle 2 46868 Rockwell SQ100, SQHP, SL100 (4 ⁵⁄₈"x 5 ¹⁄₄")
Axles� 24 338-181 Bracket, Track Rod/Frame 2 22186� 25 334-638 Plate, Reinforcement 2 45045-3
26 SP Walking Beam Assembly 2 Various Specify length, w/ or w/o shock absorbers
SP Special Order � Not Serviced by Dayton Parts � Product Illustration/Photo Follows � Popular �� Most PopularReference www.daytonparts.com for continuing updates.
290 Reference www.daytonparts.com for continuing updates.
Hendrickson TruckHN400/460 (3/96 to 9/97)HN402/462/522 (4/96 to present)Bolster Spring Suspensions
Hend
ricks
onTr
uck
Susp
ensi
onIll
ustra
tion 18
17
13
12 9
20
21
13
13
22
22
12
10
11
14
27
15
2830
29
17 19
19
18
14
14
15
2
2
4
5
3*
3*
Key 3* - BolsterSpring Bolt Kit
2622
24
23
23
25
1
7
4
31 After 9/98
HN 400/460 (3/96 to 9/97)
8
76
SaddleHeight
(A)
Bottom of Frame
of Beam Endof Beam Endof Beam End
Measuring for Saddle Assembly
Key Numbers with an asterisk (*) indicate a kit or assembly.
291
Hendrickson Truck
HendricksonTruck
PartsListing
HN400/460 (3/96 to 9/97)HN402/462/522 (4/96 to present)
Bolster Spring SuspensionsKeyNo.
PartNumber Description
No.Req.
OEMReference Remarks
1 SP Saddle Assembly 2 Various Specify OEM, Saddle Height & ProductionDate
�� � 2 334-852A Bolster Spring - Matched Pair 2 60879, 49377 2 pair per suspension, Replace in pairs only3 334-1299 Bolt Assembly, ⁷⁄₁₆"-20 x 1 ¹⁄₄"Lg. 32 Incl. Bolt and Hdwe.
� 4 334-1791 Service Kit, Auxilary Spring 2 57974-11 Replaces 58189 Aux Spring, Incl.SpacersSP Auxiliary Spring Assembly 2 57962 HN400/460 - 3/96 to 9/97 ProductionSP Auxiliary Spring Assembly 2 58947 HN402/462/522 - 9/98 to 11/00 ProductionSP Auxiliary Spring Assembly 2 60314 HN402/462/522 - after 11/00
� 5 334-1798 Spacer; ¹⁄₄" AR 57993-2,� 334-1799 Spacer; ¹⁄₈" AR 57993-3,
6 SP Shim, Mounting 2 58960-1 HN402/462/522 - 9/98 to 11/00 ProductionSP Shim, Mounting 2 58960-3 HN402/462/522 - after 11/00
7 SP Shim Plate 4 58949 HN402/462/522 - after 9/988 SP Bracket, Auxiliary Spring Mounting 2 58948 HN402/462/522 - 9/98-11/00 Production
SP Bracket, Auxiliary Spring Mounting 2 58948-1 HN402/462/522 - after 11/00 Production� 9 338-1956 Bracket, Saddle "V" 2 58343-1, 58343
SP Bracket, Saddle "V" 2 57461 HN400/460 - 3/96 to 9/97 Production10 334-1634 Strap, Rebound 2 57878-3
� 11 334-1800 Plate, Anchor 2 58524 HN402/462/522 - 4/96-8/98 ProductionSP Plate, Anchor 2 57787 HN400/460 - 3/96 to 9/97 ProductionSP Plate, Anchor 2 59779 HN402/462/522 - 9/98 to 11/00 ProductionSP Plate, Anchor 2 60639 HN402/462/522 - after 11/00
� 12 334-1801 Plate, Anchor 2 58376,SP Plate, Anchor 2 57787 HN400/460 - 3/96 to 9/97 ProductionSP Plate, Anchor 2 59779 HN402/462/522 - 9/98 to 11/00 ProductionSP Plate, Anchor 2 60639 HN402/462/522 - after 11/00
13 334-166 Washer, Hard Flat; ³⁄₄" 4 22962-114 SFW-58 Flat Washer; ⁵⁄₈" 4 22962-415 SP Equalizing Beam Assembly 2 Various Specify Model, Length, Bushing Type,
Production Date� 16 334-830 Service Kit, Bar Pin Bushing; Non Shim 4 34013-87 Incl. Bushing & Mounting Hdwe.
�� � 17 334-831 Service Kit, Bar Pin Bushing; Shim Type 4 34013-88 Incl. Bushing, Shims & Mounting Hdwe.18 334-832 Bolt Assembly; 1"-8 x 6"Lg. Grade 8 8 48941 Incl. Bolt, Lock Nut & Washers
� 19 334-879 Shim; ³⁄₁₆" AR 50130� 334-880 Shim; ¹⁄₈" AR 50131
20 SP Bolt, ³⁄₄"-10 x 2"Lg. Grade 8 8 50764-621 SLNC-105 Lock Nut; ³⁄₄"-10 8 4984222 M66648 Shock Absorber 4 57241-3, 60680-3 See Shock Catalog for Additional Applications23 345-866 Torque Rod Kit. Straddle Mount 2 60218 Use 345-610 and 345-661
�� 345-610 Torque Rod End, Female, Straddle Mount AR 66610, 46610 ⁵⁄₈" Bolts, 4 ³⁄₈" Spacing�� 345-661 Torque Rod End, Male, Straddle Mount; 22
¹⁄₂"AR 66661, 46661 ⁵⁄₈" Bolts, 4 ³⁄₈" Spacing
24 SP Torque Rod Kit, Transverse 2 60215 Use 345-610 and 345-681�� 345-610 Torque Rod End, Female, Straddle Mount AR 66610, 46610 ⁵⁄₈" Bolts, 4 ³⁄₈" Spacing
� 345-681 Torque Rod End, Male, Taper Stud; 22 ¹⁄₂" AR 66681, 46681 1 ¹⁄₈"-12, 1.85" Taper� 25 338-181 Bracket, Track Rod/Frame 2 22186 For ⁵⁄₈" Bolts� 26 334-638 Plate, Reinforcement 2 45045-3 Torque Rod Plate
27 334-851 Cross Tube; 2 ⁷⁄₁₆"OD x 40 ³⁄₄"Lg. 1 44643-11 HN400/460 - 3/96 to 9/97 Production� 28 334-849 Sleeve, Nylon 2 49972 HN400/460 - 3/96 to 9/97 Production
29 334-1300 Cap, Cross Tube 2 56910 HN400/460 - 3/96 to 9/97 Production30 334-1301 Bolt Assembly; ¹⁄₄"-28 x 4 ¹⁄₂"Lg. 2 HN400/460 - 3/96 to 9/97 Production
� 31 334-1800 Plate, Anchor 2 58524 HN402/462/522 - 9/98-11/00 Production
SP Special Order � Not Serviced by Dayton Parts � Product Illustration/Photo Follows � Popular �� Most PopularReference www.daytonparts.com for continuing updates.
292 Reference www.daytonparts.com for continuing updates.
Hendrickson TruckHN 400/460 Truck (11/88 to 2/96)HNT 460 TrailerBolster Spring Suspensions
Hend
ricks
onTr
uck
Susp
ensi
onIll
ustra
tion
Key Numbers with an asterisk (*) indicate a kit or assembly.
293
Hendrickson Truck
HendricksonTruck
PartsListing
HN 400/460 Truck (11/88 to 2/96)HNT 460 Trailer
Bolster Spring Suspensions
KeyNo.
PartNumber Description
No.Req.
OEMReference Remarks
1 SP Saddle Assembly 2 50787-XXX Specify Height & OEM� 2 334-848 Service Kit, Rebound Stop 2 49399 Incl. 49395 Stop and Mounting Hdwe.
3 SP Equalizing Beam Assembly 2 49976-XXX Specify Length; Includes Bar Pin, Bushings &High Rate Bolster
� 4 334-849 Sleeve, Nylon 2 499725 334-1300 Cap, Cross Tube 2 569106 334-1301 Bolt Assembly; ¹⁄₄"-28 x 4 ¹⁄₂"Lg. 2 Incl. Bolt and Hdwe.7 334-851 Cross Tube; 2 ⁷⁄₁₆"OD x 40 ³⁄₄"Lg. 1 44643-11
� 8 334-850 Service Kit, Rebound Control 2 49768�� � 9 SP Bolster Spring - Matched Pair 2 64718 2 pair per suspension; Replace in pairs only
10 334-1299 Bolt Assembly, ⁷⁄₁₆"-20 x 1 ¹⁄₄"Lg. 32 Incl. Bolt and Hdwe.� 11 334-830 Service Kit, Bar Pin Bushing; Non Shim 4 34013-87 Incl. Bar Pin Bushing & Mounting Hdwe.
�� � 334-831 Service Kit, Bar Pin Bushing; Shim Type 4 34013-88 Incl. Bar Pin Bushing, Alignment Shims &Mounting Hdwe.
12 334-832 Bolt Assembly; 1"-8 x 6"Lg. Grade 8 8 48941 Incl. Bolt, Lock Nut & Washers� 13 334-879 Shim; ³⁄₁₆" AR 50130� 334-880 Shim; ¹⁄₈" AR 50131� 334-881 Shim; ³⁄₈" AR 57026� 14 334-638 Plate, Reinforcement 2 45045-3 Torque Rod Plate� 15 338-181 Bracket, Track Rod/Frame 3 22186 For ⁵⁄₈" Bolts
16 � Torque Rod, Transverse, Kit 2 60215 Use 345-610 and 345-681�� 345-610 Torque Rod End, Female, Straddle Mount 2 46610, 66610 ⁵⁄₈" Bolts, 4 ³⁄₈" Spacing
� 345-681 Torque Rod End, Male, Taper Stud; 22 ¹⁄₂" 2 46681, 66681 1 ¹⁄₈"-12, 1.85" Taper17 SP Torque Rod, Rigid 2 32271-XXX Hendrickson P/N Stamped on Rod; Provide
No. for Proper Identification; or Use 345-610& 345-661
�� 345-610 Torque Rod End, Female, Straddle Mount 2 46610, 66610 ⁵⁄₈" Bolts, 4 ³⁄₈" Spacing�� 345-661 Torque Rod End, Male, Straddle Mount;
22 ¹⁄₂"2 46661, 66661 ⁵⁄₈" Bolts, 4 ³⁄₈" Spacing
18 M66886 Shock Absorber 2 47902-11 See Shock Catalog for Additional ApplicationsM65478 Shock Absorber 2 47902-18 See Shock Catalog for Additional Applications
SP Special Order � Not Serviced by Dayton Parts � Product Illustration/Photo Follows � Popular �� Most PopularReference www.daytonparts.com for continuing updates.
294 Reference www.daytonparts.com for continuing updates.
Hendrickson TruckR400/460/480/520Tandem Suspensions
Hend
ricks
onTr
uck
Susp
ensi
onIll
ustra
tion
Key Numbers with an asterisk (*) indicate a kit or assembly.
295
Hendrickson Truck
HendricksonTruck
PartsListing
R400/460/480/520Tandem Suspensions
KeyNo.
PartNumber Description
No.Req.
OEMReference Remarks
1 SP Saddle Assembly 2 49197-000 Specify Height "A"SP Saddle Assembly 2 50207-000 Specify Height "A"
� 2 338-1831 Cap, Saddle 4 58795�� 3 334-174 Stud Assembly; ⁷⁄₈"-14/9 x 4 ⁷⁄₈"Lg. 8 6696 Incl. Stud, Lock Nut and Washer�� 4 334-150 Washer, Hard Flat; ⁷⁄₈" 8 22962-2
5 SLN-106 Lock Nut; ⁷⁄₈"-14 8 0002-096 See Charts Beam Assembly 2
� 7 321-243 Bushing, Beam Center Rubber; Welded Plug 2 49400 High Confinement, 400 Series Standard321-244 Bushing, Beam Center Rubber; Loose Plug 2 49600 High Confinement, 400 Series Standard
� 321-124 Bushing, Beam Center Rubber; Welded Plug 2 29438-5 Severe Duty; Fully Bonded (w/TransverseRods); R460, 480, 520 Series
�� 8 334-113 Cross Tube; 2 ⁷⁄₁₆" x 44 ⁷⁄₈"Lg. 1 44643-9 R400, 460 Series334-1126 Cross Tube; 46" Lg. 1 7622-3 R480, 520 Series
�� � 9 322-102 Bushing Kit, Bronze Center 1 30437 Incl. Keys 10-13 for 2 Beams322-102A Bushing Kit; Bronze Center 2 34013-54 For 1 Beam
� 10 322-103 Bushing, Bronze Center; 3 ¹⁄₂"ID x 4 ³⁄₄"OD x5 ⁷⁄₈"Lg.
2 30240-2
11 334-114 Sleeve, Center; 2 ¹⁄₂"ID x 3 ¹⁄₂"OD x 12"Lg. 2 14685� 12 334-115 Seal; 3 ⁷⁄₁₆"ID x 4 ³⁄₄"OD x ¹⁄₄"Thk. 4 30334
� 13 334-116 Washer; 3 ¹⁄₂"ID x 5 ³⁄₄"OD x ¹⁄₈"Thk. AR 32365� 14 334-107 Fitting, Grease; 2 ⁵⁄₈"Lg. x ¹⁄₈"-27 NPT 2 30087� 15 334-830 Service Kit, Bar Pin Bushing; Non Shim 2 34013-87 Incl. Bar Pin Bushing & Mounting Hdwe.
�� � 16 334-831 Service Kit, Bar Pin Bushing; Shim Type 2 34013-88 Incl. Bar Pin Bushing, Alignment Shims &Mounting Hdwe.
� 17 334-879 Shim; ³⁄₁₆" AR 50130� 334-880 Shim; ¹⁄₈" AR 50131� 334-881 Shim; ³⁄₈" AR 57026
18 SP Bar Pin End Bushing Tool Kit 1 174919 SP Torque Rod, Transverse, Kit 1 60215 Use 345-310 and 345-681
�� 345-610 Torque Rod End, Female, Straddle Mount AR 66610, 46610 ⁵⁄₈" Bolts, 4 ³⁄₈" Spacing�� 345-661 Torque Rod End, Male, Straddle Mount; 22
¹⁄₂"AR 66661, 46661 ⁵⁄₈" Bolts, 4 ³⁄₈" Spacing
� 345-681 Torque Rod End, Male, Taper Stud; 22 ¹⁄₂" 2 66681, 46681 1 ¹⁄₈"-12, 1.85" Taper20 SP Torque Rod, Rigid 2 32271-XXX
�� 345-610 Torque Rod End, Female, Straddle Mount 2 66610, 46610 ⁵⁄₈" Bolts, 4 ³⁄₈" Spacing�� 345-661 Torque Rod End, Male, Straddle Mount; 22
¹⁄₂"2 66661, 46661 ⁵⁄₈" Bolts, 4 ³⁄₈" Spacing
� 21 334-638 Plate, Reinforcement 2 45045-3� 22 338-181 Bracket, Track Rod/Frame 2 22186 For ⁵⁄₈" Bolts
SP Special Order � Not Serviced by Dayton Parts � Product Illustration/Photo Follows � Popular �� Most PopularReference www.daytonparts.com for continuing updates.
top related