r/v hugh r. sharp hypack configuration documentation
Post on 30-Dec-2016
230 Views
Preview:
TRANSCRIPT
mac-help@unols.org
R/V Hugh R. SharpHypack Configuration
Documentation
Multibeam Advisory Committee
March 22, 2016Hypack 2016
2016-04-28 1
Same as 2012 MAC visit
Different from 2012 MAC visit
✔
mac-help@unols.org
Hardware Configuration Parameters
2016-04-28 2Access Under: “Help” – Legacy Software - Hysweep Hardware✔
mac-help@unols.org
Hardware Configuration Parameters
2016-04-28 3Access Under: “Help” – Legacy Software - Hysweep Hardware
Click the “Setup…” button to Configure the ResonSeabat 7125 driver
✔
mac-help@unols.org
Hardware Configuration Parameters
2016-04-28 4
Logging snippets in Hypack made Hypack very unstable during installation trials [Note from 2013]
This allows you to control start/stop logging in Reson 7kCenter to facilitate recording of snippets/sidescan data
Access Under: “Help” – Legacy Software - Hysweep Hardware
mac-help@unols.org
2016-04-28 5
Hardware Configuration Parameters
Access Under: “Help” – Legacy Software - Hysweep Hardware
Content of these tabs changes depending on which system is chosen from the “installed”list
✔
mac-help@unols.org
Hardware Configuration Parameters
2016-04-28 6
Make sure you chose the correct device on the “Manufacturer/Model” tab prior to setting up other parameters. This title bar of the window will confirm which system you are configuring
Access Under: “Help” – Legacy Software - Hysweep Hardware✔
mac-help@unols.org
2016-04-28 7Access Under: “Help” – Legacy Software - Hysweep Hardware
Hardware Configuration Parameters
mac-help@unols.org
2016-04-28 8Access Under: “Help” – Legacy Software - Hysweep Hardware
Hardware Configuration Parameters
mac-help@unols.org
2016-04-28 9
Hardware Configuration Parameters
Access Under: “Help” – Legacy Software - Hysweep Hardware
Patch Test offsets are entered here, but these offsets are not applied to the HSX.s7k files
This value varies with drop keep deployment configuration:6’ 4.943 m3’ 4.028 m0’ 3.114 m-1’ 2.809 mFlush w/ hull 3.807
mac-help@unols.org
2016-04-28 10
Hardware Configuration Parameters
Access Under: “Help” – Legacy Software - Hysweep Hardware✔
mac-help@unols.org
Hardware Configuration Parameters
2016-04-28 11Access Under: “Help” – Legacy Software - Hysweep Hardware
This port is hardwired in the POS/MV and you shouldn’t have to change itIf you reconfigure the
POS/MV IP address, you will have to update this field
✔
mac-help@unols.org
2016-04-28 12Access Under: “Help” – Legacy Software - Hysweep Hardware
Hardware Configuration Parameters
mac-help@unols.org
2016-04-28 13Access Under: “Help” – Legacy Software - Hysweep Hardware
Hardware Configuration Parameters
✔
top related