s u m m a r y - visvesvaraya national institute of...
Post on 23-Mar-2018
215 Views
Preview:
TRANSCRIPT
Name of work: Various Miscellaneous Works in Various Departments at VNIT, Nagpur.
Sr. No. Name of Work Amount
A) Construction of Ramp for Physically Disabled Persons to Various Departments.
B) Alteration Rock Mechanics Lab. of Mining Department.
C) Renovation & Refurbishment of HOD Chamber of Department of MME.
S U M M A R Y
D)Provision of Aluminum Partition to Develop Tribology Lab. In Workshop of Mech. Dep't. at
VNIT, Nagpur.
Total Cost of Work A+B+C+D
Contractor Director VNIT, Nagpur.
Schedule-B
Name of work: Various Miscellaneous Works in Various Departments at VNIT, Nagpur.
(A) Construction of Ramp for Physically Disabled Persons to various departments.
In Figures In Words
1 2 3 4 5 6 7
1 Excavation for foundation in earth, soils of all types, sand
gravel and soft murum, hard moorum including removing the
excavated material upto a distance of 50 m. beyond the
building area and stacking or spreading as directed,
dewatering, preparing the bed for the foundation and
necessary back filling, ramming, watering, including shoring
and strutting as necessary complete. Spec No. BD.A. 1/Page
No. 259 5.00 Cu.M.
Item
No. Description Quantity Unit
Rate (For all Floors to be Considered)Amount
2 Removing cement tiles, or marble or polished shahabad floor
or dado by cutting with cutter machine or as required without
bed concrete including stacking the material as directed with
all leads, lifts etc. complete. Spec. No. As directed by
Engineer-in-charge. 25.00 Sq.M.
3 Filling in plinth and floor with stone dust / murum / Garden
Soil in 15 cm to 20 cm layers including watering compaction
complete. Spec. No. : As directed by Engineer-in-charge.
10.00 Cu.M.
4 Providing and laying in situ, cement concrete M-15 (1:2:4) of
trap/granite/quartzite/geniss metal for foundation and
bedding, Flooring including bailing out water, plywood/steel
formwork, compacting, finishing uneven and honeycombed
surface curing etc. complete. The Cement Morter 1:3 plaster
is considered for rendering uneven and honeycombed
surface only. Newly laid concrete shall be covered by gunny
bag, plastic, tarpulin etc. Spec No. :Bd. E.1/Page No. 287/
I.S.456 (2000) 2.00 Cu.M.
Page 1
In Figures In Words
1 2 3 4 5 6 7
Item
No. Description Quantity Unit
Rate (For all Floors to be Considered)Amount
5 Providing laying in situ, cement concrete M-20 grade of
trap/granite/quartzite/gneiss metal for R.C.C. work in
foundations like raft, grillages, strip- foundations and footings
of R.C.C. columns and steel stanchions including beiling out
water, plywood/steel formwork compaction, curing and
roughening the surface if special finish is to be provided,
finishing uneven and honeycombed surface with C.M. 1:3 of
sufficient minimum thickness to give smooth and even
surface etc. complete. (Excluding reinforcement and
structural steel) The cement Mortar 1:3 plaster is considered
for rendering uneven and honeycombed surface only. Newly
laid concrete shall be covered by gunny bag plastic, trapaulin
etc. (Wooden centering will be not allowed). Spec No.
Bd.F.3/Page No. 298/I.S.456(2000) 5.00 Cu.M.
6 Providing and fixing in position after reinforcement of various6 Providing and fixing in position after reinforcement of various
diameter for R.C.C. pile caps, footing, foundation, slabs,
beams, and column, staircase, coping fins, etc. as per
detailed design and drawing and schedules incluiding cutting,
bending hooking the bars, binidng with wires or tack welding
and supporting as required completed. (For T.M.T Steel Bars)
Spec No. Bd.F. 17/Page No. 306 0.30 M.T.
7 Providing fly ash lime brick masonry brick conforming to I.S.
12894:1990 of size 19 cm x9 cm x 9 cm) in cement mortar
1:6 in foundation and plinth of inner walls / in plinth of external
walls including striking joints on unexposed faces, racking
out joints on exposed face and watering complete. Spec No.
Bd. G. 5 / Page No. 315 5.00 Cu.M.
8 Providing internal cement plaster 12 mm thick in a single coat
in cement mortar 1:4 without neeru finish to concrete/brick
surface in all positions including scaffolding and curing
complete. Providing groove at, joint of B.B. Masonry and
concrete members complete. Spec No. Bd. L. 2/Page No. 368
20.00 Sq.M.
Page 2
In Figures In Words
1 2 3 4 5 6 7
Item
No. Description Quantity Unit
Rate (For all Floors to be Considered)Amount
9 Providing and applying exterior emulsion water based water
proof Acrylic paint of ACE or equivalent of approved
manufacture and of approved colour and shade to exterior
old/new surfaces in two coats including scaffolding preparing
the surface to receive paint etc. complete. Spec. No.: As
directed by Engineer-in-charge. 20.00 Sq.M.
10 Providing and fixing exterior grade fabricated fibre reinforced
heavy duty cement concrete tiles for flooring of approved
colour and design, 22 + 2 mm thick, Bayer colour pigmented
as per IS:1237-1980 reaffirmed in 2006, having compressive
strength more than 500 kg/cm² like Ultra Tiles or equivalent,
in designed / chequered pattern on a bed of 1:6 cement
mortar including cement float, filling joints with neat cement
slyrry, curing etc. complete.. Spec. No. As directed by
Engineer-in-charge. 60.00 Sq.M.Engineer-in-charge. 60.00 Sq.M.
11 Providing and fixing stainless steel railing with top and vertical
pipe of 50 mm dia. At 0.90 m. c/c or as required and
horizontal pipes of 25 mm dia. In two rows, with vertical stay
posts of 50 mm dia. pipeparallel to last free vertical pipe at
free end, all pipes of S.S. 304 grade of 16 guage, Including
buffing, fabricating fixtures and fastenings including pipe base
of appropriate diameter and ball base of 75 mm dia. above
one major post etc. complete. Spec No. As Directed by
Engineer-in-charge. 70.00 Sq.M.
12 Providing and fixing stainless steel railingas per the detailed
drawing with top handrail pipe of 40 mm dia. and L-bend
support pipe of 25 mm dia. At 0.90 m. c/c or as required to be
fixed over existing railing's vertical pipes for handicaps, all
pipes of S.S. 304 grade of 16 guage, Includingwelding,
buffing, fabricating, grinding, fixtures and fastenings etc.
complete. Spec No. As Directed by Engineer-in-charge.
150.00 Rmt.
Page 3
In Figures In Words
1 2 3 4 5 6 7
Item
No. Description Quantity Unit
Rate (For all Floors to be Considered)Amount
13 Providing and fixing in position in all position stainless steel
pipes of required dia (25mm/40mm/50mm) i.e. vertical /
horizontal / inclined all pipes of 16 guage thick including
polishing, buffing, fabricating fixtures and fastening including
S.S. end caps, bends, tees etc. as per drawing or as directed
etc. complete. Spec.No.: As directed by engineer in charge.
(Grade-304) 80.00 K.G.
Total Cost of Work (A)
Contractor Director
VNIT, Nagpur.
Page 4
B) Alteration in Rock Mech. Lab. Of Mining Department at VNIT, Nagpur.
Sr.no Description Qty. Unit Amount
In Figures In Words
1 2 3 4 5 6 7
1 Removing brick masonry in lime or cement mortar and
stacking the materials as directed with all leads, lifts etc.
complete. Spec. No. As directed by Engineer-in-charge.2.00 Cu.m
2 Demolishing the R.C.C work 1:2:4 and sorting out the
material such as steel etc. and stacking them within the
specified lead or as directed. Spec. No. As directed by1.00 Cu.m
SCHEDULE-B
Rate
Name of work: Various Miscellaneous Works in Various Departments at VNIT, Nagpur
specified lead or as directed. Spec. No. As directed by
Engineer-in-charge.
1.00 Cu.m
3 Removing cement tiles, or marble or polished shahabad or
pvc floor or dado without bed concrete with machine
including stacking the material as directed with all leads,
lifts etc. complete. Spec. No. As directed by Engineer-in-
charge.
5.00 Sq.m
4 Providing, supplying and fixing in position Powder coated
extruded aluminium partitions, partly glazed and partly
laminated panels having frame made out of extruded
tubular sections of size 40 mm x 65 mm with 12 mm thick
three layered flat pressed teak wood particle board bonded
with BWP type exterior grade phenol formaldehyde
synthetic resin confirming to IS: 12823- 1990 laminated
on both sides, Nova teak or equivalent and 5 mm thick
selected quality float glass clips 12mm x12mm and rubber
cushioning beading to glass partition as per approved
drawing. Spec. No. As directed by Engineer in
charge.1.2mm thick
12.00 Sq.m
Page 1
Sr.no Description Qty. Unit Amount
In Figures In Words
1 2 3 4 5 6 7
Rate
5 Providing and fixing suspended white/colour decorative
ceiling of gypsum board which includes G.I perimeter
channel MF6 of size 0.4 mm thick(having one flange of
20mm and another flange of 30mm and web of 27mm)
along with perimeter of ceiling, screw fixed to the brick
wall / partition with the help of nylon sleeves and screw at
610 mm centre. Thereafter suspending GI intermediate
channel 600mm c/c of size 45mm from the soffits at
450mm centre. with connecting angle (ceiling angle) of
width 25mm x10mm x.40mm thick fixed to soffit with G.I
cleat and teel expansion fasteners. Ceiling section (MF 5)
of .55 mm thickness having knurltd web of 51.5 mm and
two flanges of 26mm each with lips of 10.5 mm are thentwo flanges of 26mm each with lips of 10.5 mm are then
fixed to the intermediate channel with help of connecting
clip and in direction perpendicular to the intermediate
channel
450mm centre. 12.5mm tapered. edge Gyp board
(conforming to IS 2095-1982) is then screw fixed to
ceiling section with dry wall screws at 230mm centre
Screw fixing is to be done mechanically with suitable
attachment. The boards are to be joined and finished so as
to have flush look with includes filling & finishing the
tapered & square edges of the board with jointing
compound, joint paper tape and appropriate suitable
primer and three coat of plastic acrylic paint. The item
includes for light fitting, grill diffuseres and cut out etc.
have to be made with frame of perimeter channels of size
20mm x 30mm x .55mm thick supported suitable and
angle bead is to be used at steps to get straight line finish
etc complete.
12.00 Sq.m
Page 2
Sr.no Description Qty. Unit Amount
In Figures In Words
1 2 3 4 5 6 7
Rate
6 Providing and laying ceramic tiles of approved quality,
required size and 5.5 mm thick for flooring in required
position laid on bed of C.M. 1:4 or on ready made
adhesive mortar of approved quality including cement
float, filling joint with white / colour cement slurry,
cleaning, curing, complete. Spec. No. As directed by
Engineer-in-charge.
12.00 Sq.m
7 Providing and laying ceramic tiles of approved quality,
required size and 5.5 mm for dado and skirting in
required position with ready made adhesive mortar of
approved quality in required position after making the
wall portion in level in plaster of C.M. 1:4 including joint
filling with white/colour cement slurry, cleaning, curing,
2.00 Sq.m
filling with white/colour cement slurry, cleaning, curing,
complete. Spec. No. As directed by Engineer-in-charge.
8 Providing internal cement plaster 12 mm thick in a single
coat in cement mortar 1:4 without neeru finish to
concrete/brick surface in all positions including
scaffolding and curing complete. Providing groove at,
joint of B.B. Masonry and concrete members complete.
Spec No. Bd. L. 2/Page No. 368
26.00 Sq.m
9 Scraping out old white wash/ colour wash by brushing
and or scraping by sand paper and preparing the wall
surface smooth including necessary repairs to scratches
etc complete .Spec. No. As directed by Engineer-in-
charge.
50.00 Sq.m
Page 3
Sr.no Description Qty. Unit Amount
In Figures In Words
1 2 3 4 5 6 7
Rate
10 Providing and applying putty to old/new plastered
surfaces in two coats to receive approved paint in all
positions including all materials (Birla white or
equivalent), labour scaffolding and curing etc. complete.
Spec.No.: as directed by engineer in charge
50.00 Sq.m
11 Providing and applying washable Acrylic emulsion paint
of approved quality colour and shade to existing surfaces
in two coats including scaffolding, preparing the surfaces
to receive paint including primer coat etc. complete.
Spec. No. As directed by Engineer in charge. B)New
Surface.
50.00 Sq.m
12 Providing and applying two coats of synthetic enamel12 Providing and applying two coats of synthetic enamel
paint of approved colour to old structural steel work and
wood work in buildings including, scaffolding if
necessary cleaning & preparing the surface including
primer coat etc., complete
4.00 Sq.m
Contractor Director
VNIT,Nagpur
Total Cost of Civil Work(B)
Page 4
Schedule-B
Name of Work: Various Miscellaneous Works in Various Departments at VNIT, Nagpur.
(C) Renovation and Refurbishment of HOD Chamber of Department of MME at V.N.I.T, Nagpur.
In Figures In Words
1 2 3 4 5 6 7
1 Removing doors and stacking the materials as directed with
all leads, lifts etc. complete. Spec. No. As directed by
Engineer-in-charge.
1 No
2 Removing brick masonry in lime or cement mortar and
stacking the materials as directed with all leads, lifts etc.
complete. Spec. No. As directed by Engineer-in-charge.2.00 Cu.m
3 Demolishing cement concrete 1:2:4 or reacher mix and
Rate (For all Floors to be Considered)Item
No. Description of Items Qty Unit Amount
3 Demolishing cement concrete 1:2:4 or reacher mix and
sorting out the material such as steel etc. and stacking them
within the specified lead or as directed. Spec. No. As
directed by Engineer-in-charge.
0.25 Cu.m
4 Providing Fly ash lime Brick masonry (Bricks conforming
to I.S. 12894 : 1990 and of size 19 cm x 9 cm x 9 cm) in
cement mortar 1:6 in super structure including striking
joints, racking out joints watering and scaffolding complete.
1.00 Cu.m
5 Providing internal cement plaster 12 mm thick in a single
coat in cement mortar 1 : 5 without neeru finish to
concrete/brick surface in all positions including scaffolding
and curing complete. Providing groove at, joint of B.B.
Masonry and concrete members complete.Spec No. Bd. L.
2/Page No. 368
12.00 Sq.m
Page 1
In Figures In Words
1 2 3 4 5 6 7
Rate (For all Floors to be Considered)Item
No. Description of Items Qty Unit Amount
6 Scraping out old white wash/ colour wash by brushing
and or scraping by sand paper and preparing the wall
surface smooth including necessary repairs to scratches etc
complete .Spec. No. As directed by Engineer-in-charge.
55.00 Sq.m
7 Providing and applying putty to old/new plastered
surfaces in two coats to receive approved paint in all
positions including all materials (Birla white or equivalent),
labour scaffolding and curing etc. complete. Spec. No.: as
directed by engineer in charge.
70.00 Sq.m
8 Providing and applying washable Acrylic emulsion paint of
approved quality colour and shade to existing surfaces in
two coats including scaffolding, preparing the surfaces to
receive paint including primer coat etc. complete. Spec.110.00 Sq.m
receive paint including primer coat etc. complete. Spec.
No. As directed by Engineer in charge. (b) For New surfaces
9 Providing and applying two coats of synthetic enamel
paint of approved colour to old structural steel work and
wood work in buildings including, scaffolding if necessary
cleaning & preparing the surface including primer coat etc.,
complete. As directed by Engineer-in-charge.
9.00 Sq.m
10 Providing and fixing Powder coated aluminium fully glazed
doors including door frame with powder coating 5mm thick
sheet glass necessary fixtures and fastenings, neoprene
type rubber plain gaskets as per detailed drawing and
specifications etc. complete. As directed by Engineer in
charge.
4.50 Sq.m
Page 2
In Figures In Words
1 2 3 4 5 6 7
Rate (For all Floors to be Considered)Item
No. Description of Items Qty Unit Amount
11 Providing and fixing in position powder coated aluminium
windows / ventilators of various size with open able / sliding
aluminium frame, 5 mm thick plain sheet glass shutter,
glazing clips / neoprene / rubber / PVC Gasket of approved
quality, chromium plated brass wigs, other aluminium
fixtures and fastenings, handle, stopper etc. complete
including making the damaged structure to its original
condition. (Sample to be got approved from Engineer-in-
charge before use) Spec. No.: As directed by Engineer-in-
charge.
6.00 Sq.m
12 Providing and fixing suspended white/colour decorative
ceiling of gypsum board which includes G.I perimeter
channel MF6 of size 0.4 mm thick(having one flange of
20mm and another flange of 30mm and web of 27mm)
along with perimeter of ceiling, screw fixed to the brick wall /along with perimeter of ceiling, screw fixed to the brick wall /
partition with the help of nylon sleeves and screw at 610 mm
centre. Thereafter suspending GI intermediate channel
600mm c/c of size 45mm from the soffits at 450mm centre.
with connecting angle (ceiling angle) of width 25mm x10mm
x.40mm thick fixed to soffit with G.I cleat and teal expansion
fasteners. Ceiling section (MF 5) of .55 mm thickness having
knurled web of 51.5 mm and two flanges of 26mm each with
lips of 10.5 mm are then fixed to the intermediate channel
with help of connecting clip and in direction perpendicular to
the intermediate channel 450mm centre. 12.5mm tapered.
edge Gyp board (conforming to IS 2095-1982) is then screw
fixed to calling section with dry wall screws at 230mm centre
Screw fixing is to be done mechanically���������������������������������������������������������������������������������������������������������Page 3
In Figures In Words
1 2 3 4 5 6 7
Rate (For all Floors to be Considered)Item
No. Description of Items Qty Unit Amount
filling & finishing the tappered & square edges of the board
with jointing compound, joint paper tape and appropriate
suitable primer and three coat of plastic acrylic paint. The
item includes for light fitting, grill diffusers and cut out etc.
have to be made with frame of perimeter channels of size
20mm x 30mm x .55mm thick supported suitable and angle
bead is to be used at steps to get straight line finish etc
complete. Spec No. : As directed by Engineer-in-charge.
64.00 Sq.m
Total Cost of Work - C
Contractor Director VNIT, Nagpur.
Page 4
Page 5
Page 6
Page 7
Page 8
SCHEDULE - B
Name of work : Various Miscellaneous Works in Various Departments at VNIT, Nagpur.
(D) Provision of Aluminum Partition to Develop Tribology Lab. In Workshop of Mech. Dep't. at VNIT, Nagpur.
Amount
In Figures In Words
1 2 3 4 5 6 7
1 Providing, supplying and fixing in position Powder coated
extruded aluminum partitions, fully/partly glazed and fully/partly
laminated panels having frame made out of extruded tubular
sections of size 40 mm x 65 mm with 12 mm thick three
layered flat pressed teak wood particle board bonded with
BWP type exterior grade phenol formaldehyde synthetic resin
confirming to IS: 12823- 1990 laminated on both sides, Nova
teak or equivalent and 5 mm thick selected quality float glass
35.00 Sq.M.
Item
No. Description of Items Qty Unit
Rate
teak or equivalent and 5 mm thick selected quality float glass
clips 12mm x12mm and rubber cushioning beading to glass
partition as per approved drawing. Spec. No. As directed by
Engineer in charge.
2 Providing and fixing Powder coated aluminum fully glazed /
partly laminated or full laminated doors including door frame
with powder coating 5mm thick sheet glass necessary fixtures
and fastenings, neoprene type rubber plain gaskets as per
detailed drawing and specification etc. complete. Spec. No. As
directed by Engineers in-charge.
6.00 Sq.M.
Amount
In Figures In Words
1 2 3 4 5 6 7
Item
No. Description of Items Qty Unit
Rate
3 Providing and fixing suspended white/colour decorative ceiling
of gypsum board which includes G.I. Perimeter channel (MF6)
of size 0.40mm thick (having one flange of 20 mm and another
flange of 30 mm and web of 27 mm) along with perimeter of
ceiling, screw fixed to brick wall / partition with the help pf nylon
sleeves and screws at 610 mm centres. Thereafter suspending
G.I. intermediate channel (MF 7) 600 mm C/C of size 45mm
(0.9 mm thick with two flanges of 15 mm each) from the soffit
at 450 mm centre with connecting angle (i.e. ceiling angle( of
width 25mm x 10mm x 0.40mm thick fixed to soffit with G.I.
cleat and tee expansion fasteners. Ceiling sections (MF 5) of
0.5 mm thickness having knurled web of 51.5 mm and two
flanges of 26 mm each with lips of 10.5 mm are then fixed to
the intermediate channel with the help of connection clip and in
27.00 Sq.M.
direction perpendicular to the intermediate channel at 450 mm
centres. 12.5 mm tapered edge GYP Board (conforming to IS
2095-1982) is then screw fixed to ceiling section with dry wall
screws at 230 mm centres.
Screws fixing is to be done mechanically with suitable
attachment. The boards are to be joined and finished so as to
have flush look which includes filling and finishing the tapered
& square edges of the boards with jointing compound, joint
paper tape and appropriate suitable primer and three coats of
plastic acrylic paint. The item includes for light fitting, grill
diffusers and cut out etc. have to be made with frame of
perimeter channels of size 20mm x 30mm x 0.55mm thick.
supported suitable and angle bead is to eb used at steps to get
straight line finish etc. complete. Spec. No.: As directed by
Engineer-in-charge.
Amount
In Figures In Words
1 2 3 4 5 6 7
Item
No. Description of Items Qty Unit
Rate
4 Scraping out old white wash / colour wash, Distemper by
brushing and or scraping by sand paper and preparing the wall
surface smooth including necessary repairs to scratches etc.
complete. Spec. No.: As directed by Engineer-in-charge,
60.00 Sq.M.
5 Providing and applying washable acrylic emulsion paint of
approved colour and shade to existing surface in two coats
including scaffolding, preparing the surface to receive paint
and applying putty, primer coats etc. complete. Spec. No. As
directed by Engineer-in-charge. a) For old surface.
60.00 Sq.M.
6 Providing and applying two coats of synthetic enamel paint of
approved colour to old structural steel work and wood work in
buildings including scaffolding if necessary, cleaning and
preparing the surface including primer coat complete. (Sample
and brand is to be got approved from Engineer-in-charge
before use) Spec. No. As directed by Engineer-in-charge.
5.00 Sq.M.
Total of Work D
Contractor Director
VNIT, Nagpur.
List of Approved Makes /Manufactures
(For Civil and Plumbing works)
Sr. No. Details of Materials Brand Name Manufacturer's Name
1 2 3 4
Paints & Primers Shall be first Manufactures
by:
1 Synthetic Enamel Paint i) Apcolite Synthetic. i) Asian
ii) Luxol Synthetic. ii) Berger
iii) ICI delux iii) ICI Dulux
iv) Nerolac iv) Nerolac
2 Acrylic Washable Distemper i) Tractor i) Asian
ii) Bison ii) Berger
iii) Nerolac Acrylic iii) Nerolac
3 Plastic Emulsion Paint i) Royale Luxury i) Asian
ii) Luxol Silk ii) Berger
iii) ICI delux iii) ICI Dulux
iv) Nerolac iv) Nerolac
4 Weather proof Exterior Acrylic
Emulsion paint
i)Snowcryl-XT
ii)Apex
iii) Weather Coat
i) Snowcry-XT
ii) Apex
iii) Weather Coat
5 Water proofing cement paint i) Snowcem Plus
ii) Decocem Super
i) Snowcem india
ii) Decocem Paints
6 White Cement___
i) J.K.White
ii) Birla White
Plywood Products:
7 Laminates i) Marino
ii)Century
iii)Greenlam
iv) Euro
i) Marino Industries
ii) Century
iii) Green Ply
iV) Euro
8 Flush Door Shutters i) Kalpataru
ii) Vikalapa
iii) Anchor
iv) Action-tesa
i) Kalpataru
ii)Vikalapa
iii) Anchor
iv) Action-Tesa
9 Pre Laminated Particle Board Novopan
Ecoboard
Novopan
Ecoboard
10 Ply Wood, Block Board i) Green ply
ii) Century
iii ) Euro
iv) Asis
i) Green ply
ii) Century Ply
iii ) Euro
iv) Asis
11 Ceramic Tiles(300 x 300 mm ) -First
Quality
___
i)Somani
ii) Orient Ceramics
iii) Johnson Ceramics
iv) Nitco
v) Kajaria
12 Glazed Tiles (100 x 200 mm) - First
Quality ___
i) Johnson
ii) Somani
iii)Kajaria
13 Floor Dividing Strips Fixopan PVC strips or
Equivalent
Fixopan Engineers
14 Mirror Glass, Window Panes (plain)___
i) Asahi Float
ii) Modi Float
15 Aluminium Section
___
i) Jindal
ii) Hindalco
iii) AGVAlfab Ltd.
16 M.S.Pipe
___
i) Prakash
ii) Jindal
iii)QST
17 G.I.Pipes i) Tata
ii) Prakash Surya
iii) Zenith
18 Viterous China Sanitaryware
___
i)Parryware
ii) Hindware
iii)Cera
19 Bottle Trap i)Gem
ii) L & K
20 C.P.Fittings and accessories, flush
valves C.P.Waste, spreaders,Urinal flush
pipes, Bib cock, pillar cock.
i)Gem
ii)Parko
iii) Aquel
21 Gun MetalValves (full way check and
globe valves),Ball Cock ___
i)Leader (ISI)
ii)Zoloto
iii) Prayag
22 Stoneware pipes and Gully Traps___
i)Perfect
ii) ISI Mark
23 RCC Pipes ISI Mark
24 C.I.double flanged sluice valves, non-
Return valve. ___
i) Kirloskar
ii) IVC
iii) Kamla
25 Bib cock i) Parko
ii) Aquel
26 Manhole Cover & Frame Polycrete Polycrete Enterprises
27 PVC Flooring
___
i) Premier Vinyl
ii) Krishna Vinyl
iii) Bhor
iv) Armstrong
v) L.G.
28 Floor Spring
___
i) Everite
ii) Hardwyn
iii) Godrej
iv)Doorking
29 Pre-molded tiles Dovetex
30 Cold twisted bars for reinforcement./
TMT ___
i) Rashtriya Ispat Nigam
ii) Tiscon (Tata)
iii) MSP Gold
31 Ordinary Portland Cement/
Portland Pozolana Cement
43 Grade/ 53 Grade i) Ambuja
ii) Ultratech
iii) Manikgarh
iv) ACC
32 Shuttering Oil Fosroc
33 Bricks Local second quality
34 Steel Kitchen Sink
___
i) Nirali
ii) Frankie
iii) Neelkanth
iv) Hindware
35 Aluminium Fittings___
i) Diamond
ii) Nulite
36 Standard rolled steel section for windows___
ISI Mark
37 Sensor Controlled Auto Flush___
i)Automat
ii)Jaquar
38 Centrifugally Cast (Spun) iron S&S Pipes
& Fittings
Neco Centri
Kapilansh Centri
i) Jayaswals Neco. Ltd.
ii) Kapilansh
39 Polythelene water strorage Tanks___
i) Sintex
ii) Polycon
40 Marble aggregates (Best Quality)___
i) Nathdwara
ii) Rajrgarh
41 Water proofing material for Cement
Concrete/Mortor ___
i) Pidilite
ii) Roff
iii)Fosroc
42 C.I.Pipes : Class L.A. ___
i) Kesoram
ii) Supra
43 Polysulphite Sealant
___
i)Fosroc
ii)Pidilite
iii) Roff
44 Bitumen impregnated Shalimar Tar Product
45 Resin based adhesive
___
i) Fevicol
ii) Woodgrip
iii)Carpainter
iv) Falcofix
46 Ready Mix Concrete
__
i) Lafarge
ii) Ultratech
iii) RMC
47 Readymade Putty__
i) Birla wall care
ii) JK White
48 M.M.Tiles ISI Mark
49 Rain water SWR pipe __ i)Finolex
ii) Supreme
iii) Kisan
50 Vitrified tiles i) Orient
ii) Johnson
iii) Nitco
iv) Durato
v) Kajaria
51 Veneers i) Greenlam
ii) Mayur
iii) Century
iv) Euro
i) Greenlam
ii) Mayur
iii) Century
iv) Euro
Note:-
Samples of all materials, including above mentioned items shall be got approved
from the Engineer before the materials are procured and brought
at site for bulk consumption. Materials shall not be procured by the contractor untill
clearance is accorded by the Engineer. The change of brand can be made by Engineer if required.
Contractor Director
VNIT, Nagpur
top related