sample line flow controller - home | aerodyne

AERODYNE RESEARCH, Inc. 45 MANNING ROAD, BILLERICA, MA 01821 (978) 663 9500 www.aerodyne.com CACC_OPT_2_1

Sample Line Flow ControllerA light weight and low power pump with active flow control for pulling gas or aerosol sample to instrumentation.

• Gas and aerosol instruments that require additional sample delivery pumping at controlled rates less than 10 SLPM. • A general purpose pump with user settable flow rates.

• Designed for stand alone operation or for integrated use with the ARI Dryer system.

• Lightweight and low power 24VDC operation.

• Combines a mass flow meter and a vacuum pump with control electronics to actively maintain a user adjustable set point.

• Flow rate in the range of 0.5 to 8 LPM can be controlled.

APPLICATIONS ADVANTAGES

AERODYNE RESEARCH, Inc. 45 MANNING ROAD, BILLERICA, MA 01821 (978) 663 9500 www.aerodyne.com CACC_OPT_2_1

Sample Line Flow Controller

Dimensions: 5” H x 6-1/2” W x 14” D (13 cm x 17 cm x 36 cm)

Weight: 8 pounds (3.6 kg) Power: 40W (24VDC) Flow Control Range: 0.5 - 8 LPM

Gas Connections: ½” Swagelok for flow in, ¼” tube stubs for aerosol dryer connections

Electrical 24V input via AMP connector size17 CPC 206036-2Connections: BNC flow signal output (for recording purposes, 1-5V fs)

Rear panel connections

Combined Flow Controller and Dryer System

SPECIFICATIONS: