schuco sisteme fatade luminatoare - · pdf filemodule fotovoltaice siguran
Post on 07-Feb-2018
235 Views
Preview:
TRANSCRIPT
2 Schüco
Type of construction
Highly thermally insulated
Thermally insulated
Non-insulated
Façades
Curtain walling
Non-ventilated curtain walls
Ventilated/non-ventilated façades
Rear-ventilated curtain walls
Skylight construction
Structural glazing
Insert units and infill panels
Schüco AWS 102
Schüco AWS 102.NI
Schüco AWS 70 / 70.HI - window
Schüco AWS 75.HI - window
Schüco AWS 75.SI - window
Schüco AWS 75 BS / 75 BS.HI - window
Royal S 47D - roof vent
Royal S 88D / 106D - roof vent
Royal S 65 - door
Royal S 70 / 70.HI - door
Royal S 75.HI - door
Schüco Firestop II - T30 - door
VacuTherm high-insulation panel
Schüco spandrel panel W90 - fire-resistant panel
SunControl - large blade solar shading
External blinds
Photovoltaic modules
Security
Fire protection
Burglar resistance
Bullet resistance
Blast resistance
Schüco 59Rezumat
Overview
Utilizarea sistemelor pentru faţade şi luminatoare System matrix for façades and skylights
�
�
Tipul construcţiei
Izolare termică superioară
Izolat termic
Neizolat
Faţade
Faţadă cortină
Faţadă caldă
Faţadă cald/rece
Faţadă ventilată
Luminator
Faţadă structurală
Elemente mobile şi paneluri
Schüco AWS 102
Schüco AWS 102.NI
Schüco AWS 70 / 70.HI - Fereastră
Schüco AWS 75.HI - Fereastră
Schüco AWS 75.SI - Fereastră
Schüco AWS 75 BS / 75 BS.HI - Fereastră
Royal S 47D - Fereastră de acoperiş
Royal S 88D / 106D - Fereastră de acoperiş
Royal S 65 - Uşă
Royal S 70 / 70.HI - Uşă
Royal S 75.HI - Uşă
Schüco Firestop II - T30 - Uşă
VacuTherm - Panel superizolat termicSchüco
Brüstung W90 - Panel rezistent la foc
SunControl - Protecţie solară cu lamele mari
Jaluzele
Module fotovoltaice
Siguranţă
Antifoc
Antiefracţie
Antiglonţ
Antiexpoziv
��� � ��
��� � ��
��� � ��
���
��
�
��
��
��� �
���
��
� �
��� � �
���
�
��� � �
��� � �
��� � �
�� � � �
��� �
��� � �
��
�
��� � �
�
�
�
FW 6
0+
FW 5
0+
FW 5
0+AO
S / A
OT
FW 6
0+AO
S / A
OT
FW 5
0+BF
/ FW
60+
BF
FW 5
0+S
FW 5
0+DK
FW 5
0+AR
CFW
50+
SG /
FW 6
0+SG
SG 5
0NSk
yLin
e S
65
SkyL
ine
C 65
Ca lider de piaţă europeanSchüco este specialist în înve-lişuri multifuncţionale pentru clă-diri. Arhitecţii şi prelucrătoriiprofită, colaborând cu Schücode detaliile perfecte şi de siste-mele verificate în mulţi ani depractică. Numele Schüco este,de mai mult de cincidecenii,echivalent cu garanţia calităţii şiinovaţia permanentă, valorificatărapid şi eficient dr către antre-prenori şi investitori.
As market leader in Europe,Schüco is a specialist in multi-functional building envelopes.When working with Schüco, architects and fabricators alikecan benefit from sophisticatedsystems and painstaking attention to detail. The Schücobrand stands for more than fivedecades of consistently high levels of quality and innovation,which quickly pay dividends forclients and investors.
�
��� � �
� �� �
�
� �� �
��� � �� � �� �
�
�
� �
��
�
�
�
�
� �
� �
� �
� ��
�
� �� �
� �
� �
�
�
� �
� �
�
� �
� �
�
�
� �
� �
�� � � � � � �
�
Competenţa de sistem SchücoSchüco system expertise
ProduktbereichSchüco 3Cuprins
Contents
CuprinsContents
Speditionsstraße,
Düsseldorf, Germania
Speditionsstraße,
Düsseldorf, Germany
Noutăţi
New products
4 InovaţiiInnovations
Teme
Topics
6 Automatizare şi comandăAutomation and control
8 Creativitate şi designDesign expertise
10 Protecţie solarăSolar shading
Sisteme
Systems
12 Sisteme clasiceBasic systems
20 Sisteme creativeDesign systems
32 Variante de sisteme System options
40 Faţade din elementeUnitised façades
44 Elemente mobileInsert units
49 Sisteme pentru protecţie solarăşi sisteme sinergeticeSolar shading systems andsynergy façades
54 Soluţii specialeSpecial solutions
58 Sigurantă de sistem verificatăProven System reliability
59 RezumatRecomandări pentru utilizareasistemelor de pereţi cortinăşi luminatoareOverviewSystem matrix forfaçades and skylights
FW 50+SG
Secţiune în riglă
Transom section detail
FW 50+.HI
Izolare termică superioară
High level of thermal
insulation
Ferestre Schüco AWS 102
Schüco window AWS 102
4 Schüco Noutăţi
New products
InovaţiiInnovations
FW 50+ / FW 60+
Kalt-Warm-Fassade
Ventilated/non-ventilated façade
Cu sistemele complexe FW 50+
si FW 60+ se pot realizanumeroase variante de faţadecalde/reci.Avantaje: alternanţă variată aa ele-mentelor mobile şi câmpurilorfixe, precum şi numeroase posibi-lităţi pentruconfigurarea / proiec-tarea faţadelor.
A wide range of ventilated / non-ventilated façades are nowavailable using the FW 50+ andFW 60+ multi-systems. Thesesystems allow flexible designs foropening units and fixed lightswith many different ground planoptions.
Pagina 18
page 18
Schüco TipTronic
Sistem de feronerie pentru
ferestre
Window fittings system
Prima feronerie ascunsă, oscilo-batantă, complet mecatronică,care asigură legătura în timp realîntre comanda de la distanţăcomodă şi intuitivă, cu automa-tizarea clădirii.
The first concealed fullymechatronic turn/tilt fittingcombines simple and intuitiveoperation in real time with theworld of building automation.
Pagina 6
page 6
FW 50+.HI
Sistemele .HI (High Insulation)repzezintă pietre de hotar îndomeniul izolaţiei termice.Datorită tehnicii inovative de izo-lare sistemele de faţade cu izo-laţie termică superioarăcorespun, printre altele, optim,cerinţelor normelor europene.
The .HI (High Insulation) systemsare setting new standards inthermal insulation. Innovativeinsulation technology means thatthese high-insulation façadesystems comply fully with thedifferent industry regulations,including the German energy-saving requirements (EnEV).
Pagina 14
page 14
Cu Schüco beneficiaţi de compe-tenţa sistemelor şi de numeroasenoutăţi, în obişnuita calitateSchüco. Prin inovaţii tehnice şi orealizare perfectă a materialelor şiaspectului vi se oferă nenumărateposibilităţi de utilizare a lor şi decreativitate neîngrădită.
Schüco’s expertise in systemconstruction is matched by itsdedication to delivering new products, all with the customarySchüco quality. Featuring technical innovations and a flawless combination of materials and design, Schücoproducts have a range of usesthat provide plenty of scope for creativity.
Schüco 5Noutăţi
New products
FW 50+SG / FW 60+SG
Faţadele plane, din sticlă se potrealiza aproape perfect cu siste-mele FW 50+ SG şi FW 60+ SG(Structural Gazing).Sistemele se pot folosi pentrupereţi cortină de aproape o ricedimensiuni.
The FW 50+SG/FW 60+SGsystems can be used to createalmost perfect flush-fitted structural glazings.These systems can be used forfaçades of nearly all sizes.
Pagina 28
page 28
Ferestre Schüco AWS 102
Ferestre Schüco AWS 102.NI
Schüco window AWS 102
Schüco window AWS 102.NI
Ferestrele clapă şi cu deschidereîn plan paralel din noile seriiSchüco AWS 102/AWS 102.NIoferă arhitecţilor noi modalităţide configurare a faţadelor.Sistemele pentru ferestre asi-gură, în plus, un climat plăcut,prin aerisirea naturală şi efi-cientă.
The new projected top-hung andparallel opening windows in theSchüco AWS 102 / AWS 102.NIseries allow the architects newcreative freedom in façadedesign. Natural and efficientventilation ensures a pleasantinterior climate.
Pagina 46
page 46
Schüco SkyLine S 65
Schüco SkyLine C 65
Noile sisteme de faţade din ele-mente Schüco SkyLine S 65/ C65 datorită gradului mare deprelucrare în atelier genereazăefectiv valoare suplimentară,care se reflectă mai ales în res-pectarea termenelor de execuţie,calitate maximă şi costuri gene-rale reduse.
Due to the high degree ofprefabrication offered, the newSchüco SkyLine S 65 / C 65systems provide added value,enabling Schüco to deliverunrivalled quality on time at alower cost.
Pagina 42
page 42
Automatizare şi comandă
Automation and control
6 Schüco
Turnul INTERSHOP,
Jena, Germania
INTERSHOP-Tower,
Jena, Germany
Schüco a realizat e-window,fereastra inteligentă pentru faţa-da inteligentă a viitorului.
Schüco TipTronic
Prima feronerie ascunsă, oscilo-batantă, complet mecatronică,care asigură legătura în timp realîntre comanda de la distanţăcomodă şi intuitivă, cu automa-tizarea clădirii.
• Comandă simplă şi intuitivăprintr-un mâner special
• Închidere şi deschidere întimp real
• Comandă pentru ferestre inde-pendente (inclusiv pentru ele-mente greu accesibile, caluminatoare) sau pentru grupepână la 30 de ferestre.
• LED-ul integrat confirmă opticcomanda primită
• Conectare simplă la sistemelede automatizare ale clădiriilorprin EIB sau prin comutatoareconvenţionale.
• Pentru ferestre batante sauoscilo-batante cu deschiderespre interior
• Inclusiv protecţie la prindereadegetului
Schüco has developede-window, the intelligentwindow and façade controltechnology of the future.
Schüco TipTronic
The first concealed fullymechatronic turn/tilt fittingbrings both simple and intuitiveoperation to the whole area ofbuilding automation in real time.Intelligent control of individualwindows and window groupsgreatly facilitates operation whichis controlled either by time orsensor, via PC or manually bypushbutton.
• Simple, intuitive operationwith special handle
• Locked and unlockedin real time
• Controls individual windows(including inaccessible oneslike toplights) or groups of upto 30 windows
• Optical response using fullyintegrated LEDs and optionalnight design
• Easy to connect to buildingautomation systems via EIBor conventional gate inputs
• For inward-opening side hungand turn/tilt windows
• Anti-finger-trap protectionincluded
Automatizare şi comandăAutomation and control
Schüco 7
Automatizarea şi comanda faţadelor inteligenteAutomation and control of façade technology
Schüco TipTronic
Aspect uniform datorită sistemului
de fereonerie ascunsă.
Concealed fittings system
for uniform appearance
Schüco TipTronic
Comandă intuitivă cu mâner sau taste
Intuitive operation using handle or button
Sisteme creative
Design expertise
8 Schüco
Sisteme creative
Design expertise
Schüco 9
Experţi în designDesign expertise
FW 50+ARC
Faţadă cu cabluri tensionate
Cable tensioned façade
FW 50+.HI
Faţadă montant/riglă
cu capac vetical
Mullion/transom façade
with vertical emphasis
Sistemele pentru faţade de laSchüco oferă fiecărei construcţiisoluţii atractive cu mare libertatecreativă: de la transparenţatotală a faţadelor de sticlă şiluminatoarelor până la combina-rea diverselor materiale în faţa-dele calde/reci.
Spectrul larg al posibilităţilor deconfigurare este extins şi prinbogatul sortiment de capacepresoare. Este posibilă accentua-rea intenţionată a construcţieimontant / riglă prin capace pre-soare cu secţiune dreptunghiu-lară sau obţinerea unei suprafaţeplane prin folosirea unor capacefoarte plate.
Schüco façade systems allowthe design freedom to createattractive solutions for any building envelope: from transparent architecture, such as glass façades and skylights to ventilated/non-ventilated façades using a wide range ofbuilding materials.
The wide choice of cover capsavailable provides even greaterarchitectural design freedom.Four-sided cover caps, for example, can be used to accentuate the mullion/transomconstruction, whilst extremelyflat cover caps or structural glazing afford a particularly sleekappearance.
FW 50+SG / FW 60+SG
Faţadă structurală cu rosturi filigranate
Structural glazing with slimline shadow joint
FW 50+
Faţadă riglă/montant cu capace plate
Mullion/transom façade with flat cover cap
FW 50+
Capac presor cu 2 laterale, pentur accentuarea
liniilor verticale sau orizontale ale faţadei
2-sided cover cap,
for horizontal or vertical emphasis of the façade
ProduktbereichProtecţie solară
Solar shading
10 Schüco
Sisteme de protecţie solară şi umbrire Solar shading and anti-glare protection systems
Pentru cerinţele referitoare laumbrire şi protecţie solarăSchüco are soluţii complete, desistem. Familia de sistemeSunControl şi Veltrup oferă omulţime de elemente multivalen-te pentru umbrire şi protecţiesolară, precum şi soluţii specia-le. Toate componentele suntperfect compatibile cu faţadele,ferestrele, uşile şi faţadeleSchüco.
SunControl
Sistemul modular de lameleSchüco SunControl garantează orezolvare optimă şi confortabilăa umbririi şi devierii luminii.Lamele fixe sau mobile, cucomandă manuală sau automa-tizată, în construcţie orizontalăsau verticală - complexitatea
sistemului poate raspundeoricărei cereri legate de funcţio-nalitate şi design.
Sisteme de protecţie solară
Veltrup
Paleta cuprinzătoare a sistemuluicu numeroasele sale variantefuncţionale oferă soluţia corectăpentru orice cerere:marchize exterioare pentru faţa-de şi luminatoare, markisolete siobloane asigură protecţia solarăoptimă. Există şi rulouri montatela interior care oferă protecţieindividuală.Prin comandarea corespunzătoa-re a lamelelor jaluzelelor sepoate obţine de exemplu luminanaturală dorită şi în acelaşi timpumbrirea locurilor de muncăechipate cu monitoare.
Jaluzele exterioare Veltrup,
Photonikzentrum,
Berlin-Adlershof, Germania
Veltrup external blinds,
Photonics centre,
Berlin-Adlershof, Germany
Protecţie solară
Solar shading
Schüco 11
Lamele Sun Control,
Clădire administrativă, Padua, Italia
Large SunControl louvre blades,
Offices, Padua, Italy
Schüco meets complexrequirements in solar shadingand anti-glare protection,offering comprehensivesolutions from a single source.SunControl and Veltrup systemsoffer a wide range of solarshading and anti-glare protectionunits as well as a selection ofcustomised solutions and areideal for interfacing with Schücofaçades, windows, doors andconservatories.
SunControl
Schüco SunControl, the modularlarge louvre blade system,ensures simple tailor-madesolutions for shading and lightdirection. The sheer varietyoffered by the systemtechnology – active or passive
blades, manual or automaticcontrol, horizontal or verticalconstruction – opens uptremendous scope for designand performance.
Veltrup solar shading systems
This wide range of systemsoffers countless functions tomeet every requirement:external façade and skylightawnings, small awnings andexternal blinds ensure optimumsolar shading; whilst internalroller shutters allow individualsolar shading. Variable bladecontrol of external blinds allowstargeted utilisation of naturallight to be effortlesslycombined, for example, withanti-glare protection for VDUworkstations.
Sisteme clasice
Basic systems
12 Schüco
Sisteme clasice
Basic systems
Schüco 13
Sisteme clasiceBasic systems
FW 50+ / FW 60+
Faţade verticale
Vertical façades
Sistemele izolate standard pen-tru faţade verticale, împreună cubogatul program de capace pre-soare fac posibile nenumaratevariante de design pentru aspec-tul exterior al faţadelor. Alteavantaje: deschideri de rastermari, protecţie sonoră.
With the wide range of covercaps available, the standardsystems for vertical façadesoffer outstanding design optionsfor every type of façade. Otheradvantages include large modulesizes and noise reduction.
Pagina 14
page 14
FW 50+ / FW 60+
Construcţii de luminatoare
Skylight constructions
Construcţiile de luminatoare pre-tenţioase din punct de vederearhitectonic (de ex. poligonalesau piramide) se pot realiza deo-sebit de elegant cu sistemeleFW 50+ şi FW 60+ precum şicu FW 60+ aplicat pe structură.
The FW 50+ and FW 60+
skylight constructions and theFW 60+ add-on construction areideal for producing the most architecturally sophisticated andvisually appealing skylight designs, such as polygons andpyramids.
Pagina 16
page 16
Sistemele de bază SchücoFW50+ şi FW 60+ oferă soluţiiverificate, care si-au doveditvaloare practică pe planmondial.
Compatibilitatea între sisteme înlumea Schüco garantează ceamai mare siguranţă în proiectarecu maximă libertate creativă.
The Schüco FW 50+ and FW 60+ basic systems offertried and tested solutions, whichhave proven themselves timeand again in projects all over theworld.
In addition, the compatibilityacross the Schüco systems provides the maximum creativefreedom.
FW 50+ / FW 60+
Faţade calde-reci
Ventilated/non-ventilated façade
Sistemele FW 50+ şi FW 60+ sepot utiliza în construcţii combina-te ca faţade calde-reci, aceastafiind o soluţie economică cu undesign atractiv riglă/montaj.
Composite ventilated/non-ventilated façades in an attractivemullion/transom design providecost-effective façade solutionsfor FW 50+
and FW 60+ systems.
Pagina 19
page 19
Faţade verticale
Vertical façade
14 Schüco
Faţade verticale
Vertical façade
Schüco 15
Cu sistemele FW 50+ şi FW60+, cele mai des utilizate înpractică, se pot realiza faţade şiluminatoare absolut diferite con-ceptual.
Datorită compatibilităţii cu multesisteme Schüco, FW 50+ şi FW60+ se numără printre cele maivandute sisteme de faţade dinEuropa.
Variantele cu izolaţie superioară.HI se conformează standardeloreuropene referitoare la econo-mia de energie, cum sunt EnEVşi Documentul L.
The proven FW 50+ and FW 60+
multi-purpose systems allow theconstruction of impressive façades and skylights from themost disparate of designs.
Their compatibility with manyother Schüco systems makesFW 50+ and FW 60+ two of thebest selling façade systems inEurope.
The .HI high insulation systemcomplies with the latest energy-saving regulations, such asEnEV and Document L.
FW 50+ / FW 60+
Sisteme standard pentru fatade verticale
The standard systems for vertical façades
FW 50+.HI
Montant
Mullion
FW 50+
Faţade segmentate
Faceted façade
FW 50+
Capac presor decorativ
Feature cover capParcul Industrial
Reading International,
Reading, Marea Britanie.
Reading International
Business Park,
Reading, GB
FW 50+.HI
Cruce pe faţadă
Cruciform façade joint
Casa de economii Vogtland, Plauen, Germania
Vogtland Savings Bank, Plauen, Germany
Produktbereich16 SchŸcoConstrucţii de luminatoare
Skylight constructions
16 Schüco
Construcţii de luminatoare
Skylight constructions
Schüco 17
Cu sistemele FW 50+ şi FW 60+
se pot realiza fără probleme şicu statică perfectă chiar şi celemai pretenţioase construcţii deluminatoare ca arcade, cupolede sticlă, piramide şi bolţi.
În special pentru obiective maricum sunt centrele comerciale,clădiri administrative, hoteluri,pavilioane expoziţionale sau par-curi de distracţii, se pot realizaluminatoare cu deschideri mari,elegante din punct de vederearhitectonic.
With the FW 50+ and FW 60+
systems, the design of evencomplex geometrical skylightconstructions, such as arcades,glass domes, pyramids and barrel vaults, is straightforwardand can produce stunningresults.
Elegant skylight constructionswith broad spans are also possible for large projects, suchas shopping centres, administrative buildings, hotels,exhibition halls and leisure centres.
FW 50+ / FW 60+
Construcţii de luminatoare
Skylight constructions
Manhattan Center,
Danzig, Polonia
Manhatten centre,
Danzig, Poland FW 50+
Luminator
Skylight construction
FW 60+
Coamă
Ridge
Produktbereich18 SchŸcoFaţadă caldă-rece
Ventilated/non-ventilated façade
18 Schüco
Cu sistemele de bază FW50+ şiFW 60+ folosind tehnici de con-strucţie combinate, se pot rea-liza faţade calde-reci foarte eco-nomice şi cu multă libertate arhi-tecturală: se pot face benzi deferestre sau ferestre împuşcatesau se poate obţine aspectulfaţadelor clasice. În plus, zonelecalde-reci se pot aranja în ordi-nea dorită. Lăţimile vizibile de50-60 mm conferă construcţieitip riglă/montant un aspct atrac-tiv.
Şi din punct de vedere al sigu-ranţei aceste construcţii con-ving: parapeţii în construcţiemasivă asigură protecţie împotri-va focului şi o bună izolare ter-mică. Sistemele pot prelua toatetipurile de panele şi conţin toatecomponentele pentru prinderi peperete sau pe construcţia suport.
Un alt avantaj: scurtarea evi-dentă a timpului de montaj pen-tru că realizarea faţadei şi con-strucţia interioarelor se pot faceconcomitent.
The composite constructionallows highly cost-effectiveventilated/non-ventilated façadesto be built using the FW 50+
and FW 60+ basic systems –offering great scope forarchitectural creativity. Ribbonwindows, punched openingdesigns and structural glazingare all equally possible.The ventilated and non-ventilatedareas can easily be adjustedfor this purpose. Narrow facewidths of 50 or 60 mm offer anattractive mullion/transom look.
The façade constructions alsohave impressive safety features:large spandrel panels protectagainst flashover and offerexcellent noise reduction.The systems can accommodateall smooth-faced panels and aresupplied with all the necessarywall attachment fittings andsubstructure fixings.
Another advantage is thesignificant reduction inconstruction time as façadefabrication and interior buildingwork can be done in parallel.
FW 50+ / FW 60+
Faţade calde-reciVentilated/non-ventilated façades
Faţadă caldă-rece
Ventilated/non-ventilated façade
Schüco 19
TVP Varşovia,
Polonia
TVP, Warsaw,
Poland
Secţiune verticală prin
îmbinarea cald-rece
Vertical section of ventilated/
non-ventilated attachment
FW 50+
Faţadă cadă-rece
Ventilated /
non-ventilated façade
Sisteme creative
Design systems
20 Schüco
FW 50+S
Această construcţie izolatăriglă/montant are un aspectzvelt, de oţel, datorită profilelorportante. Se poate folosi pentrufaţade şi pentru foaiere sauholuri de intrare.
The steel load-bearing profiles ofthis thermally insulatedmullion/transom constructiongive a slender appearance tolarge-scale profile façades aswell as foyers and entrancehalls.
Pagina 22
page 22
FW 50+ARC
Sistemul cu cabluri portante dinoţel FW 50+ARC cu aspectulsău spectaculos este recoman-dat realizării unor holuri cudeschideri mari, foaiere şi hale.
With their clear span tensionedcables, the fine FW 50+ARCstainless steel system supportstructures provide a simple wayto design large reception areas,foyers and halls witharchitectural flair.
Pagina 24
page 24
Trendurile arhitecturii internaţio-nale se pot dezvolta creativ pebaza sistemelor de faţadeSchüco. De exemplu, cu profilecu aspect de oţel filigranat, ele-mente mobile cu feronerieascunsă, sisteme de cabluri pre-tensionate sau faţade completedin sticlă.
Schüco façade systems can beused to set new trends in international architecture, forexample, with stylish, slimlinesteel-look profiles, concealedopening units, clear span tensioned cables or structuralglazing.
Sisteme creativeDesign systems
Sisteme creative
Design systems Schüco 21
FW 50+DK
Cu elementele mobile cu deschi-dere oscilo-batante integrate,sistemul FW 50+DK oferă unraster unitar al faţadelor, fărăintreruperi vizuale.
With its integrated, concealedturn/tilt opening units, theFW 50+DK design seriesensures uniform façade moduleswith no visual interruptions.
Pagina 26
page 26
SG 50N
Sistemul pentru faţade SG 50Nse poate folosi pentru construcţiiremarcabile cu fronturi netededin sticlă, ordonate pe lungimesau aranjate în diverse curbe ele-gante.
The SG 50N façade constructioncan be used to create architectural features withsmooth glass fronts, horizontallyconfigured or using elegant curves.
Pagina 30
page 30
FW 50+SG / FW 60+SG
FW 50+SG/ FW 60+SG lărgescposibilităţile creative ale preţioa-selor sisteme FW 50+ şi FW60+. Ele folosesc gama bogatăde profile portante ale sistemelorde bază şi permit construcţiafaţadei structurale.
FW 50+SG / FW 60+SG add yetmore design possibilities to theproven FW 50+ und FW 60+
façade system. They use the comprehensive range of supporting structures from thebasic systems to allow it to beused as structural glazing.
Pagina 28
page 28
Sisteme creative
Design systems
22 Schüco
FW 50+S.HI
Montant forma I
I-shaped mullion
FW 50+S
Montant cu decupaje
Mullion design
Sisteme creative
Design systems
Schüco 23
FW 50+S
Nod de faţadă
Cruciform façade joint
Dacă se doreşte obţinerea uneiconstrucţii cu aspect de oţeldar nu se doreşte renunţarea laavantajele unei construcţii dinaluminiu, soluţia optimă este FW 50+S.
Conturul asemănator barelordin oţel se obţine, de exemplu,din montanţi şi rigle în formăde T sau dublu T. Variantele decapace presoare cu şuruburivizibile accentuează aspectultehnic al construcţiei.
Desigur, FW50+S se poatecombina cu FW 50+.
FW 50+S is the ideal system fora slimline steel look with all thesystem benefits of an aluminiumconstruction.
The elegant steel-look structureis achieved using slender doubleT and T-shaped mullions andtransoms. Additional cover capswith visible screws offer a hi-tech design if required.
The FW 50+S system can alsobe combined with FW 50+.
FW 50+SSistem cu aspect de oţel
Steel-look design systems
FW 50+S
Montant formă T
T-shaped mullion
Warnow-Therme,
Rostock, Germania
Warnow swimming
baths, Rostock,
Germany
Sisteme creative
Design systems
24 Schüco
Sisteme creative
Design systems
Schüco 25
Cu sistemul pentru pereţi cortinăFW 50+ARC tendinţele arhitec-turii creative se pot realiza com-plet, în sistem şi în deplină sigu-ranţă.
Fiind un sistem autoportant dincabluri de oţel inox, cuFW 50+ARC se realizează con-strucţii zvelte, transparente, fili-granate.
With the thermally insulated FW 50+ARC façade system,creative architectural trends canbe incorporated systematicallyand confidently with perfectresults.
As a clear span, interior stainlesssteel support system, FW 50+ARC accentuates atransparent and slimline look.
FW 50+ARCSistem cu cabluri pretensionate din oţel inoxDesign system with stainless steel tensioned cables
FW 50+ARC
Montant cu cabluri
pretensionate
Mullion with
tensioned cables
FW 50+ARC
Fa. Daaland,
Trondheim, Norvegia
Fa. Daaland,
Trondheim, Norway
Fa. Daaland,
Trondheim, Norvegia
Fa. Daaland,
Trondheim, Norway
ProduktbereichSisteme creative
Design systems
26 Schüco
Sisteme creative
Design systems
Schüco 27
Sistemul FW 50+ DK este o con-strucţie pentru faţade cu ele-mente mobule integrate, cudeschidere rotobasculantă, fărăcercevele vizibile la exterior.
Acest sistem conferă un aspectuniform pentgru toată suprafaţasticlei: vitrajele fixe, parapeţiisau ferestrele nu se deosebescîntre ele.
FW 50+DK este izolat termic şise caracterizează prin lăţimi vizi-bile mici la interior şi exterior.
Acest sistem creativ bazat pesistemul FW 50+ se poate utilizaatât pentru construcţii cu un etajcât şi pentru construcţii înalte.
The FW 50+DK system is a façade construction with integrated, concealed openingunits.
This system provides an identical appearance from theoutside for all the glazed fields:Fixed glazing, glass spandrelpanels and window units all lookthe same.
FW 50+DK is thermally insulated and offers narrow facewidths both internally and externally.
The design series is based onthe FW 50+ system and can beused in both single-storey andmulti-storey façade constructions.
FW 50+DKSistem cu cercevele ascunseDesign system with concealed vents
Clădirea Enka,
Istanbul, Turcia
Enka building,
Istanbul, Turkey
FW 50+DK
Câmp fix şi cercevea
Fixed light and
concealed vents
Sisteme creative
Design systems
28 Schüco
20
60
Sisteme creative
Design systems
Schüco 29
Sistemele FW 50+SG/FW 60+SGse folosesc pentru realizarea unorpereţi cortină impresionanţi, com-plet din sticlă. Şi în cazul faţa-delor de mici dimensiuni sunt lafel de spectaculoase.
Acest aspect plan al pereteluicortină se datorează faptului caprofilele sunt vizibile doar la inte-rior. La exterior se vede doarsuprafaţa sticlei, desparţită derosturi înguste.
The FW 50+SG / FW 60+SGsystem can be used to createimpressive structural glazing.This structurally glazed façade isequally impressive in smallerconstructions.
The flush-fitted appearance ofthe façade is achieved by usingprofiles that are only visible onthe room side. From the outside,only the glazing and the slendershadow joints are visible.
FW 50+SG / FW 60+SGFaţade complete din sticlă
Structural glazing
Secţiune orizontală FW 60+SG cu sigila-
tură cu garnitură în formă de U
FW 60+SG Horizontal section detail
with U-shaped dry glazing
FW 50+SG
Nod de faţadă şi rost siliconic
Cruciform façade joint and shadow joint
Secţiune verticală cu noua sigilatură
uscată şi suporturi pentru sticlă până la
450 kg.
Vertical section with new, flush-fitted dry
glazing and heavy duty glazing supports
up to 450 kg
First East
International Bank,
Sofia, Bulgaria
First East
International Bank,
Sofia, Bulgaria
Sisteme creative
Design systems
30 Schüco
Sisteme creative
Design systems
Schüco 31
Construcţia izolată termicSG 50N poate fi echipată cuferestre tip clapă, fără ca acestlucru sa-i modifice aspectulinterior sau exterior. Folosireasticlei oglindă în diverse culoripoate crea efecte opticedeosebite, în armonie cu mediulînconjurător.Absoluta planeitate a suprafeţeiexterioare de sticlă favorizeazăun grad mare de autocurăţare alperetelui cortină.
The thermally insulated SG 50N construction can be fitted with projected top hungvents without changing theinternal or external appearance.Reflective glass in different shades of colour produces asimple design feature that canbe used to ensure a building isin harmony with its surroundings. Since the outer“fully glazed surface” iscompletely flush-fitted, thefaçade has excellent self-cleaning properties.
SG 50NFaţade complete din sticlăStructural glazing
SG 50N
Câmp fix şi fereastră
clapă
Fixed light and projected
top hung vents
BRE Bank S.A.,
Katowice, Polonia
BRE Bank S.A.,
Katowice, Poland
Centru de afaceri,
Dresda, Germania
Bank and office building,
Dresden, Germany
Variante de sisteme
System options
32 Schüco
Variante de sisteme
System options
Schüco 33
Variante de sistemeSystem options
Construcţii aplicate pe lemn
Timber add-on constructions
FW 50+AOT / FW 60+AOT
Confortul şi utilitatea îmbinateperfect - acesta este rezultatulconstrucţiilor FW 50+AOT şiFW 60+AOT, soluţii constructivedeosebit de armonioase şi crea-tive.
The perfect combination of comfort and well-being: the FW 50+AOT and FW 60+AOTtimber add-on constructionsfacilitate the design of harmonious building solutions.
Pagina 38
page 38
Construcţii aplicate pe oţel
Steel add-on constructions
FW 50+AOS / FW 60+AOS
Construcţia aplicată pe oţelFW 50+AOS şi FW 60+AOS sepoate folosi pentru pereţi cortinăverticali sau acoperişuri (doarFW 60+AOS) şi permitdeschideri foarte mari.
The FW 50+AOS andFW 60+AOS steel add-onconstructions can be used forvertical façades or roofconstructions (FW 60+AOS only),and can span very large areas.
Pagina 36
page 36
Faţade rezistente la foc
Fire-resistant façades
FW 50+ BF / FW 60+ BF
Datorită aspectului identic atât lainterior cât şi la exterior pereţiicortină rezistenţi la foc FW 50+BF şi FW 60+BF se potcombina perfect cu elementelestandard FW50+ şi FW 60+, fărăse se observe vreo diferenţă.
The uniform external appearancemeans that the FW 50+ BF andFW 60+ BF fire-resistant façadescan be seamlessly combinedwith units from the standard FW 50+ and FW 60+ systems.
Pagina 34
page 34
Cu sistemele Schüco pentrufaţade se poate răspunde cusoluţii arhitectonice atractive şisigure pentru numeroasecerinţe. Compatibilitatea funcţio-nală şi estetică cu ferestrele şiuşile Schüco oferă o gamăextrem de largă de aplicaţii.
Schüco façade systems providearchitecturally attractive andsafe solutions for a wide rangeof requirements. Compatiblewith Schüco doors and windowsin terms of function, design andsafety, they offer the widestpossible range of uses.
Rezistenţă la foc
Fire protection
34 Schüco
Rezistenţă la foc
Fire protection
Schüco 35
Faţadă rezistentă la foc
FW 50+BF
Fire-resistant façade
Faţadă standard
FW 50+
Standard façade
Sistemele rezistente la foc multi-funcţionale FW 50+BF şi FW 60+BF se pot folosi oriunde,pentru faţade sau luminatoare,în condiţii de siguranţă maximă,cu profile cu lăţime vizibilăminimă. Rezultat: mai multălibertate de creaţie pentru arhi-tectura faţadelor.
Avantaje
• potenţial creativ nelimitat - aspectul faţadelor rezistente lafoc este indentic din punct de vedere optic cu al celorstandard.
• aspect filigranat datoritălăţimilor vizibile de doar50 mm respectiv 60 mm
• se pot realiza etaje cu înalţimepână la 5000 mm
• trecere elegantă de la faţada verticală la luminator
• este posibilă înglobarea uşilor antifoc
The multi-purpose FW 50+BFand FW 60+BF fire-resistantfaçades can be used for any vertical façade or skylight; offering maximum security withminimum face widths and evengreater design freedom in façade architecture.
Benefits
• Excellent design potential –identical appearance of standard and fire-resistantfaçades
• Slender appearance with profile face widths of only50 mm or 60 mm
• Curtain walling up to a storeyheight of 5000 mm
• Elegant transition from skylight to vertical façade
• Installation of fire doors possible
FW 50+BF / FW 60+BFFaţade rezistente la focFire-resistant façades
FW 50+BF
cu uşă Schüco Firestop II
Fixed light and door
Reinhardtstraßenhöfe,
Berlin, Germania
Reinhardtstraßenhöfe,
Berlin, Germany
ProduktbereichConstrucţii aplicate pe oţel
Steel add-on construction
36 Schüco
Construcţii aplicate pe oţel
Steel add-on construction
Schüco 37
FW 50+AOS / FW 60+AOS
Fabrică complet sin sticlă,
Dresden, Germania
All-glass assembly plant,
Dresden, Germany
FW 50+AOS
Montant
Mullion
FW 50+AOS
Acoperiş cu ferestre
Skylight with roof vents
Sistemele aplicate pe oţelFW 50+AOS şi FW 60+AOS secombină perfect cu structuri por-tante din oţel.
Avantaje
• dimensiuni mari de raster crea-ză condiţii ideale de luminozi-tate
• izolat termic, recomandat pen-tru vitraje de acoperiş şi faţadeverticale
• aspect exterior variat datorităcapacelor ornamentale dinaluminiu
Pentru luminatoare cu structuriportante înguste din oţel, siste-mul FW60+AOS oferă soluţiitehnice elegante. Construcţiaoferă o bogată varietate deforme structurale şi se combinăperfect cu ferestre de acoperişSchüco, deci este ideală pentruacoperişuri din sticlă şi sere.Datorită dimensiunilor de rastercât se poate de mari, încăperilerealizate sunt inundate delumină, creând un ambientplăcut.
The steel add-on constructionsFW 50+AOS and FW 60+AOScomplement the slender steelload-bearing structures perfectly.
Benefits
• Large-size module formats forperfect light conditions
• Thermally insulated, for roofglazing and vertical façades
• Rich variety of design optionsusing aluminium cover caps
For skylights with slimline steelload-bearing structures, the FW 60+AOS system offerselegant and technicallysophisticated solutions.The construction has a richvariety of structural forms andcan be combined perfectly withSchüco roof vents, making itideal for roof glazing andconservatories. The largestpossible module widths allowthe rooms to be flooded withlight, creating a pleasantenvironment.
Staţie telecabină,
Garmisch-Partenkirchen, Germania
Kreuzeckbahn cable car terminus,
Garmisch-Partenkirchen, Germany
FW 50+AOT / FW 60+AOT
Construcţiile aplicate pe lemnFW 50+AOT si FW 60+AOTcombină optim tehnologia deultimă oră cu confortul.
Avantaje
• este izolat termic, destinat acoperişurilor vitrate şifaţadelor verticale
• Aspect exterior divers datoritagamei largi de capace de clipsare, disponibile pentru diferite structuri din lemn
• dimensiunile mari de raster crează spaţii luminoase.
The FW 50+AOT and FW 60+AOT timber add-on constructions represent the perfect combination of hi-techfeatures with attractive comfort.
Benefits
• Thermally insulated, for roofglazing and vertical façades
• Rich variety of design optionsusing the wide range of covercaps available for differenttimber load-bearing structures
• Large module widths ensurelight and airy rooms
Construcţii aplicate pe lemn
Timber add-on construction
38 Schüco
Construcţii aplicate pe lemn
Timber add-on construction
Schüco 39
FW 50+AOT
Montant
Mullion
FW 50+AOT
Vedere interioară
View from inside
FW 50+AOT
Vedere exterioară
View from outside
40 Schüco Faţadă din elemente
Unitised façade
Schüco 41Faţadă din elemente
Unitised façade
Faţade din elementeUnitised façades
Schüco SkyLine S 65
Acesta este un sistem deosebitde flexibil, complex şi verificatdin punct de vedere tehnic, carecuprinde toate elementelenecesare fabricării şi montajuluifaţadelor din elemente.
The highly flexible,comprehensive and fully testedsystem contains all thecomponents required to fabricateand assemble unitised façades.
Schüco SkyLine C 65
Sistemul modular de construcţieformat din componente verifica-te tehnic se poate adapta rapidla cerinţele specifice fiecăruiobiectiv şi conţine numeroasevariante constructive.
The variable modular systemwith tested components canbe easily adapted to the uniqueneeds of each building projectand contains several designproposals.
Schüco a transferat toate com-petenţele sale ca lider în con-strucţia învelişurilor de clădiri înnoile sisteme de faţadă din ele-mente. Astfel, Schüco oferă osoluţii de sistem care optimizea-ză proiectarea, construcţia, fabri-carea şi montajul, rentabilizindinvestiţia.
As a leading building envelopespecialist, Schüco has applied itsexpertise to new unitised façadesystems, offering systemsolutions which optimisestandardised project processingin planning, construction,fabrication and installation,and increase the return oninvestment.
Pagina 42
page 42
Pagina 43
page 43
Schüco SkyLine S 65
42 Schüco Faţadă din elemente
Unitised façade
Sistemul de faţade din elemente,complex şi complet verificat,cuprinde toate accesoriile deprelucrare şi montaj şi face posibilmontajul rapid, pe etaje a elemen-telor. Toata gama de încercăriaplicate esistemului atestăperfecta compatibilitate a tuturorcomponentelor sistemului.
Avantaje
• Lăţime vizibilă îngusta, până la65 mm pe tot perimetrul
• Elemente cu stabilitate ridicatădatorită profilelor tubulare şiîmbinării în unghi
• Etanşeitate mărită: sistem verifi-cat, cu 3 camere şi garniturisuprapuse
• E-connect: este prevătut cucanale pentru conductoareleelectrice
• Sunt posibile variante construc-tive cu aspect riglă / montantsau vitrare semistructurală cuaccentuarea liniei verticale sauorizontale
• Program bogat de capace declipsare
Secţiune orizontală Schüco SkyLine S 65F cu Royal
S 102 SK/PAF
Schüco Skyline S 65F with Royal S 102 SK / PAF,
horizontal section
Colorado Tower,
Stuttgart, Germania
Colorado Tower,
Stuttgart, Germany
The unitised façade systemwhich is highly flexible and fullytested - including all fabricationand assembly parts - allowsunits to be assembled quickly instoreys. Comprehensive testingbears testimony to the perfectinterplay of all the systemcomponents.
Benefits
• Continuous, narrow sightlines up to 65 mm
• High unit stability due tohollow chamber profilesand mitred fabrication
• Excellent weathertightness:tested 3-chamber system andoverlapping gasket design
• e-connect: connection ofelectrical components fromall trades
• Available in a framed look orsemi-structural glazing designto emphasise the vertical orhorizontal lines of the façade
• Extensive range of cover caps
Schüco SkyLine C 65
Schüco 43Faţadă din elemente
Unitised façade
Sistemul de construcţie modu-lar, foarte performant, se poateadapta cerinţelor specifice alefiecărei construcţii. Avantajulevident faţă de construcţiile spe-ciale este ca acesta a fost supusverificărilor şi încercărilorspecifice. O documentaţiedetaliată minimizează cheltuielilede proiectare şi de construcţie şiaduce propuneri pentru multecomponente care completeazăsistemele modulare.
Avantaje
• Lăţimi vizibile mici, posibilpână la 65 mm
• Elemente cu stabilitate ridicatădatorită profilelor tubulare şiîmbinării în unghi
• Etanşeitate mărită: sistem veri-ficat, cu 3 camere şi garniturisuprapuse
• Valori Uf până la 2,2 W/m2K• e-connect: permite conectarea
componentelor electrice,indiferent de furnizori
• Estetică atractivă a faţadelordatorită aspectului de faţadăstructurală
High-performance modularsystem for unitised façades canbe tailored to each individualbuilding project. Componentssuch as gasket systems and glassframes are tested by renownedtest institutes, a major advantageover special constructions.Detailed documentationminimises construction andplanning costs whilst alsooffering ideas for several of thecomponents which complementthe modular systems.
Benefits
• Narrow sight linesup to 65 mm possible
• High unit stability due tohollow chamber profilesand mitred fabrication
• Excellent weathertightnessowing to overlappinggasket design
• Uf values up to 2.2 W/m2K• e-connect: connection of
electrical components fromall trades
• Attractive façade designs dueto structural glazing
Secţiune orizontală Schüco SkyLine C 65SG
cu spros şi Royal S 102 SK/PAF
Schüco SkyLine C 65SG with sash bar and
Royal S 102 SK / PAF, horizontal section
Imaginea stânga jos:
secţiune verticală Schüco SkyLine C 65SG
Imaginea dreapta jos:
secţiune orizontală Schüco SkyLine C 65SG
Picture bottom left:
Schüco SkyLine C 65SG, vertical section
Picture bottom right:
Schüco SkyLine C 65SG, horizontal section
44 Schüco Elemente mobile
Insert units
Schüco 45Elemente mobile
Insert units
Elemente mobileInsert units
Schüco AWS 102
Fereastra cu deschidere în planparalel Schüco AWS 102 oferănoi opţiuni pentru configurareafaţadelor şi optimizează ventila-rea naturală a încăperilor.
As a parallel opening window,the Schüco AWS 102 insert unitpresents new options for façade design and maximisesnatural ventilation.
Schüco AWS 102.NI
Ferestrele tip clapă construite cusistemul neizolat SchücoAWS 102.NI dispun de 3dimensiuni de foarfecă care seadaptează uşor pentru deschideri-le dorite.
The projected top hung vents forthe non-insulated Schüco AWS102.NI system can be adapted tofit the required openings usingthree different stay sizes.
Elemente mobile şi panele
Opening units and panels
Pe lângă aspectul estetic, ele-mentele inserate în faţade potîmbogăţi designul faţadelor,luminatoarelor şi serelor.
The key benefits of the insertunits are their visual appeal andthe wide variety of potential foruse in the design of façades,skylights and conservatories.
Elementele mobile din seriaSchüco AWS 102 şi diversepanele pot fi inserate în sisteme-le FW 50+ şi FW 60+ şi acoperătoate aplicaţiile ca faţade, acope-rişuri în ape sau luminatoare.
Schüco AWS 102 opening unitsand panels can be used in FW 50+ and FW 60+ profilesystems and cover all applications such as façades,sloped roofs and skylights.
Pagina 46
page 46
Pagina 47
page 47
Pagina 48
page 48
Produktbereich46 SchŸcoElemente mobile
Insert units
46 Schüco
Ventilaţia eficientă în faţadelehi-tech nu este o problemă dacă sefolosesc ferestre Schüco AWS 102cu deschidere în plan paralel PAFsau clapă SK. Secţiunea mare adeschiderii asigură condiţii optimede ventilaţie.
Sistemul inovativ de ferestre poatefi integrat fără ezitări în faţadă, fărăa fi afectat aspectul exterior alacesteia.
Avantaje
• Se pot folosi cu sistemeleFW 50+ / FW 60+ şi FW 50+ SG şi FW 60+ SG
• Cu deschidere manuală sau electrică
• Optional, cu senzor pentru supravegherea închiderii
• Economie de spaţiu: nu există element mobil în interiorul încăperilor
• Sunt disponibile mai multe variante de cercevea
Efficient ventilation in hi-techfaçades is greatly facilitated by the insulated system Schücowindow AWS 102 as parallelopening window or projectedtop hung window. Large all-round openings ensure the best possible ventilation.
The innovative window systemcan be seamlessly integratedwithout adversely affecting theeven façade geometry.
Benefits
• Can be used in the FW 50+ / FW 60+ and FW 50+ SG / FW 60+ SGsystems
• Electric or manual opening• Optional closing monitor• Space-saving: no opening unit
in the room• Various types of vent available
Ferestre Schüco AWS 102Schüco window AWS 102
Schüco AWS 102
Mâner pentru acţionare manuală
Handle for manual operation
Schüco AWS 102
Detaliu
Detail PAF
Schüco AWS 102
Vedere exterioară
View from outside
FW 60+SG / Schüco AWS 102
Secţiune orizontală
Horizontal section
Elemente mobile
Insert units
Schüco 47
Ferestre Schüco AWS 102.NISchüco window AWS 102.NI
Ferestrele din aluminiu SchücoAWS 102.NI (neizolate) – în spe-cial pentru zone climatice tempe-rate
Avantaje
• O variantă economică, neizo-lată, pentru Schüco AWS 102
• Domeniu de utilizare, dimensi-uni maxime, greutăţi maximeale cercevelei, identice cuSchüco AWS 102
• Se echipează doar cu sticlă izo-latoare tip structural
• Poate fi cu deschidere în planparalel - PAF sau clapă SK
The new Schüco aluminium window AWS 102.NI (non-insulated) - especially suited foruse in temperate climates.
Benefits
• Especially economical, non-insulated version ofSchüco AWS 102
• Area of use, maximum dimensions, maximum ventweights and fittings identicalto Schüco AWS 102
• Only with Structural Glazingstepped double glazing
• Can be installed as parallel-opening or projected top-hungwindow
Campo de las Naciones, Madrid, Spania
Campo de las Naciones, Madrid, Spain
FW 60+SG / Schüco AWS 102.NI
Secţiune orizontală
Horizontal section
Elemente mobile
Insert units
48 Schüco
Elemente mobile şi paneleOpening units and panels
Cladirea Jakob Kaiser, Berlin, Germania
Jakob-Kaiser building, Berlin, Germany
Fereastră de acoperiş in sistem Royal S
Roof vents from the Royal S system
Ferestre şi uşi Royal S
Schüco oferă o gamă complexăde ferestre şi uşi din aluminiu,pentru cele mai complexe faţa-de construite în sistem FW 50+
si FW 60+.
Exemple: Seriile de ferestreSchüco AWS 70, SchücoAWS 70.HI, Schüco AWS 75.HI,Schüco AWS 75.SI, SchücoAWS 75 BS, Schüco AWS 75 BS.HI precum şi seriilepentru uşi Royal S 70,Royal S 70.HI şi Royal S 75.HI.Rezultat: competenţa sistemuluirelevată în detalii tehnice impre-sionante şi aspect atractiv.
Royal S windows and doors
Schüco offers a comprehensiverange of aluminium windowsand doors for the mostambitious façades from theFW 50+ and FW 60+ profilesystems.
Examples: Schüco windowsAWS 70, Schüco AWS 70.HI,Schüco AWS 75.HI, SchücoAWS 75.SI, Schüco AWS 75 BS,Schüco AWS 75 BS.HI andRoyal S 70, Royal S 70.HI andRoyal S 75.HI doors.The result is system expertiseoffering impressive technicaldetails and a highly attractivelook.
Ferestre de acoperiş Royal S
Ferestrele de acoperiş Royal Sse pot monta practic oriunde înzona luminatoarelor şi garantea-ză siguranţa de sistem împreunăcu sistemele de profile FW 50+,FW 60+ şi FW 60+ aplicate.Royal S 47D, Royal S 88D şiRoyal S 106D sunt elementemobile ideale pentru vitrajeînclinate şi pentru construcţiicomplexe de luminatoare.
Panouri VacuTherm
Gama vastă de panouri opaceoferă mare libertate de creaţie laproiectarea zonelor de parapet,faţade, luminatoare şi vitrajefixe, asigură protecţie fonicăşi antifoc optimă precum şi izo-lare termică maximă.VacuTherm
Standard, SonicSafe, FireSafe W90MinoTherm
Standard, SonicSafe, FireSafe W90PU-Therm
Standard, SonicSafeSiliTherm
Standard, FireSafe G30/F30/F90
SchücoTherm panels
The wide variety of opaquepanels offer scope for creativefreedom when planningspandrel areas, windowfaçades, skylight constructionsand fixed glazing – includingoptimum noise reduction andfire protection as well asmaximum thermal insulation.VacuTherm
Standard, SonicSafe, FireSafe W90MinoTherm
Standard, SonicSafe, FireSafe W90PU-Therm
Standard, SonicSafeSiliTherm
Standard, FireSafe G30/F30/F90
Royal S roof vents
Royal S roof vents are almostalways suitable for use asskylights and ensure systemreliability in FW 50+, FW 60+
and FW 60+ add-onconstructions. Royal S 47D,Royal S 88D and Royal S 106Dare ideal insert units for slopedglazing and for the mostcomplex skylight constructions.
Unităţi VacuTherm
VacuTherm units
Sisteme de protecţie solară şi faţade sinergetice
Solar shading systems and synergy façade
Schüco 49
Sisteme de protecţie solară şi faţade sinergeticeSolar shading systems and synergy façades
Schüco SunControl
Sisteme Velrup pentru pro-
tecţie solară
Veltrup solar shading systems
Sistemele Schüco SunControl şiVeltrup oferă protecţie solară şiumbrire complexă. Soluţiilecomplete, date de un singur fur-nizor, sunt perfect compatibilecu sistemele Schüco pentru faţa-de, ferestre, uşi şi sere.
Schüco SunControl and Veltrupsystems offer versatile solarshading and anti-glareprotection. Comprehensivesolutions from a single sourcecan easily be interfaced withSchüco façades, windows,doors and conservatories.
Pagina 50
page 50
Pagina 52
page 52
Synergiefassade
Synergy façade
Faţadele sinergetice Schüco - osoluţie de încredere, complettestată tehnic, oferă complexeposibilităţi creative asigurând înacelaşi timp energie din surseneconvenţionale.Cu aceste siste-me Schüco trasează standardeleviitorului.
Schüco is a trailblazer with itssynergy façade – a reliable fullytested system with a widevariety of design options. Thefaçade system already supportsdecentralised power sources.
Faţada are un rol cheie pentruadministarea eficientă a clădirilorşi pentru implementarea mana-gementului energetic economicşi ecologic. Protecţia solară efi-cientă şi umbrirea precum şieconomia optimă de energieprin tehnica solară sunt factoricare caracterizează faţadele inte-grate ale viitorului.
The façade is key to managingbuildings efficiently andimplementing cost-effective andecologically sound energymanagement. The effective solarshading, anti-glare protectionand optimum energy savingsoffered by solar technology arekey to the integrated façades ofthe future.
Sisteme de protecţie solară şi faţade sinergetice
Solar shading systems and synergy façade
50 Schüco
Schüco SunControlSistem de protecţie solară cu lamele mariLarge blade solar shading system
Formate din lamele fixe saumobile, construcţiile SchücoSun Control pot fi orizontale,verticale sau în consolă.
SunControl fix
Protecţie solară cu lamele lateîntre 105 şi 690 mm, o con-strucţie robustă, durabilă şi fărăîntreţinere. Diferite sisteme deprindere şi o bogată paletă colo-ristică pentru individualizarealamelelor asigură varietatea desi-gnului.
Avantaje
• Transparenţă maximă datoritădistanţei mari dintre lamele
• Soluţii de sistem pentru colţuri• Rezistenţă la intemperii
SunControl mobil
Sistem cu lamele din aluminiu,sticlă sau plăci fotovoltaice,mobile, cu lăţimi între 105 şi 470mm. Mare libertate de creaţiedatorită formelor lamelelor: elip-tice, ac, perforate, drepte sauarcuite.
Avantaje
• Umbrire excelentă vara, vede-re liberă şi multă lumină natu-rală iarna
• Acţionare din interior sau exte-rior, manuală sau cu comandăautomată
• Este posibilă conectarea lasistemul de automatizare alclădirii prin e-sun
Lamele glisante SunControl
SunControl este completat de unsistem de lamele glisante careoferă umbrire ideală pentruferestre de locuinţe sau birouri.Acestea glisează pe orizontală,cu acţionare manuală sau elec-trică.
With its active or passive louvreblades, Schüco SunControl cantake the form of a horizontal,vertical or cantileveredconstruction.
Passive SunControl
Robust, durable andmaintenance-free solar shadingwith large louvre blades from105 to 690 mm. A choice ofbrackets and a wide selectionof colours for customised louvreblades offers variety in design.
Benefits
• Excellent transparency owingto the large distance betweenthe louvre blades
• System-integrated cornersolutions
• Weather resistance
Active SunControl
Large louvre blade system withrotating aluminium, glass andphotovoltaic louvre blades from
105 to 470 mm. Considerabledesign freedom with hi-tech-look elliptical, needle andperforated louvre blades as wellas straight or curved glasslouvre blades.
Benefits
• Highly effective shading insummer, uninterrupted viewsand plenty of natural light inwinter
• Visible or concealed drives with manual or automatic control
• Optional connection to building automation using e-sun
SunControl sliding
louvre blades
SunControl is complemented bya sliding louvre blade systemwhich offers ideal screening andsolar shading for windows inhomes and offices. It can beadjusted horizontally eithermanually or automatically.
Centrul de săntate, Wittenberg, Germania
Health centre, Wittenberg, Germany
Sisteme de protecţie solară şi faţade sinergetice
Solar shading systems and synergy façade
Schüco 51
Sisteme de protecţie solară VeltrupVeltrup solar shading systems Protecţie solară, anti-reflexie şi ecranare individualăIndividual solar shading, anti-glare protection and screening
Protecţie contra căldurii versuslumină naturală. Ecranare versusvedere liberă spre exterior: cusistemele de protecţie solarăVeltrup se pot rezolva sigur şiconvenabil cele mai diversecerinţe individuale.
Jaluzele exterioare
In funcţie de necesităţi, se potalege lamele plate sau în Z,opace, perforate sau cusuprafaţă reflexivă
Avantaje
• Protecţie solară mobilă, ajusta-bilă individual.
• Protecţie termică optimă întimpul verii.
• Compatibilitatea sistemului deprindere simplifică proiectarea
• Permite controlul umbririi pen-tru cerinţe individuale.
• Coordonarea controlului indivi-dual al draperiilor şi sistemuluicentral de comanda a faţadei
Heat resistance versus utilisationof natural light – anti-glareprotection versus an uninterruptedview outside. Veltrup solarshading systems offer safe andreliable solutions for the mostdiverse individual requirements.
External blinds
There is selection of flanged, flatand Z-shaped louvre blades,opaque, perforated or coated forlight direction, on tracks or cordsin a choice of colours. Intelligentdrive strategies offer centralisedcontrol for optimum use.
Benefits
• Individually adjustable andmoveable solar shading
• Optimum summer insulation• Interfaces with compatible fixing
system for reliable planning• Solar shading control to meet
individual requirements• Co-ordinates individual
controls for blinds, roomcontrol and a central controlunit for the façade
Centrul de sănătate,
Wittenberg,
Germania
Health centre,
Wittenberg, Germany
Sisteme de protecţie solară şi faţade sinergetice
Solar shading systems and synergy façade
52 Schüco
Faţade sinergeticeSynergy façadesÎnvelişuri de clădiri pentru viitor
Building envelopes for the future
Active façades with integratedsolar energy utilisation make itpossible to design pioneeringbuilding envelopes. Schücocapitalises on its expertise infaçade and solar systems toproduce innovative synergyfaçades, setting new standardsfor the industry: moving awayfrom stand-alone solutions andtowards holistic solutions.
Schüco synergy façades are anefficient energy source, meetingall requirements for weatherresistance, thermal insulation,fire protection and noisereduction, whilst offering animpressive range of effectivehigh-tech solutions with an eyeto the future.
All solar units are made-to-measure, available in practicallyevery size and are ideally suitedto the tried and tested Schücofaçades and skylightconstructions.
Standardised assembly andfixing components ensure thehighest fabrication standardsand excellent quality.
IPS Meckenheim,
Germania
IPS Meckenheim,
Germany
Faţadele active, cu sisteme inte-grate pentru utilizarea energieisolare fac posibilă proiectareaunor faţade ale viitorului. Schücooferă, prin combinarea compe-tenţelor sale în domeniul faţa-delor şi al sistemelor solare,sisteme inovative de faţadesinergetice, stabilind noi stan-darde în acest domeniu: sedetaşează de soluţiile simple,izolate termic, creând soluţii uni-tare, complete.
Faţadele sinergetice Schücosunt o sursă eficientă de ener-gie, satisfacând toate cerinţele
privind izolarea termică,protecţiefonică şi rezistenţă la foc, iarprin aspectul high-tech obţinutimpresionează optic.
Toate unităţile solare sunt dispo-nibile în aproape orice dimensiu-ne şi se integrază ideal în siste-mele Schüco pentru faţade şiluminatoare, de calitate verifi-cată.
Componentele standardizate demontaj şi prindere oferă sigu-ranţă maximă la prelucrare şicalitate maximă.
Sisteme de protecţie solară şi faţade sinergetice
Solar shading systems and synergy façade
Schüco 53
Tehnica fotovoltaică integratăIntegrated photovoltaicsEficienţă maximă pentru design individual
Maximum efficiency for individual designs
Modulele fotovoltaice integratepot fi unităţi opace, semi-opacesau transparente şi au aceleaşicalităţi şi proprietăţi funcţionaleşi optice cu ale vitrajelor con-venţionale. Cpmbinând bogatapaletă coloristică şi de forme acelulelor apar noi posibilităţipentru designul faţadelor.
Ca lider în sisteme pentru înve-lişuri de clădiri şi sisteme solare,Schüco oferă un sistem complet,verificat din punct de vederetehnic şi în acelaşi timp o sursăde energie descentralizată şi ief-tină. O investiţie rentabilă dinpunct de vedere economic şiecologic.
The photovoltaic modules can beused either as opaque, partiallyopaque or fully transparent infillunits and meet all conventionalglazing requirements in terms offunction and appearance.This opens up brand newarchitectural possibilities forindividual façade design whencombined with cells in a rangeof shapes and colours.
From the leading system providerfor building envelopes and solartechnology, this Schücoinnovative synergy façade withfully tested reliable systemtechnology also constitutes asustainable, efficient anddecentralised energy source.A cost-effective and ecologicallysound investment which is sureto pay off.
Cladire administrativă Juwi,
Bolanden, Germania
Juwi office building,
Bolanden, Germany
Faţadă sinergetică pe baza FW50+
Faţadă cald/rece cu aspect identic în zona ferestre-
lor şi a parapeţilor. Se pot utiliza toate seriile de
ferestre Royal S. În zona de parapet se pot monta
panouri fotovoltaice.
Synergy façade based on FW 50+:
Ventilated/non-ventilated façades, identical in
appearance in the window or spandrel panel area.
Suitable for all Royal S windows. The spandrel
panel areas can accommodate PV modules.
Soluţii speciale
Special solutions
54 Schüco
Soluţii speciale
Special solutions
Schüco 55
Soluţii specialeSpecial solutions
Pe lângă sistemele pentruferestre şi faţade Schüco oferăsoluţii speciale, verificate şiîncercate, bazate pe construcţiilestandard. La cerere se pot dez-volta soluţii specifice unui pro-iect, folosind componentelestandard.
There are many tried and testedspecial solutions for façade andwindow profiles based onSchüco’s proven systemconstructions. New project-specific solutions can bedeveloped using the standardcomponents as required.
Turnul Uniqua,
Viena, Austria
Uniqua Tower,
Vienna, Austria
Secţine verticală
Vertical section
Soluţii speciale
Special solutions
56 Schüco
Munich Tower MTC, München, Germania
Munich tower MTC, Munich, Germany
CityTower, Offenbach, Germania
CityTower, Offenbach, Germany
FEZ, Bruchsal,
Germania
FEZ, Bruchsal,
Germany
Soluţii speciale
Special solutions
Schüco 57
Turnul Florido, Viena, Austria
Florido Tower, Vienna, Austria
ING House, Amsterdam, Olanda
ING House, Amsterdam, The Netherlands
Polderbebauung,
Neumühlen,
Germania
Polderbebauung,
Neumühlen, Germany
Siguranţa de sistem
System reliabilty
Standul de încercări faţa-
de la Centrul Tehnologic.
Façade test rig at the
Technology Centre
Centrul tehnologic Bielefeld
Sediul central, Bielefeld, Germania
Technology Centre
Company headquarters in
Bielefeld, Germany
Centrul tehnologic Schüco dinBielefeld are în dotare unuldintre cel mai performant standde încercări pe plan mondial.Aici se testează toate noutăţile,de la faţade complete până lamîner, să corespundă normelorîn vigoare. Pe standul de probese pot încerca elemente de faţa-dă cu înălţime de două etaje, încondiţii de încărcare extremă,inclusiv simulări de cutremure.
Siguranţa de sistem Schücodovedită experimental în centrultehnologic ajută tuturor arhitecţi-lor şi proiectanţilor la realizareaunor proiecte sigure, cu soluţiiunanim acceptate.
The Schüco Technology Centrein Bielefeld is one of the world’sleading test facilities. Beforebeing assessed by official testinstitutes, all of our new developments – from the smallest door handle to complete façades – are testedhere for their compliance withcurrent industry standards. Onthe façade test rig, we can testtwo-storey façade units underextreme loads and even simulatean earthquake.
Schüco’s system reliability,tested at our Technology Centre,helps designers and planners tocreate safe, fully approvedproject solutions from their individual design ideas.
Siguranţă verificată de sistem Proven system reliability
58 Schüco
Type of construction
Highly thermally insulated
Thermally insulated
Non-insulated
Façades
Curtain walling
Non-ventilated curtain walls
Ventilated/non-ventilated façades
Rear-ventilated curtain walls
Skylight construction
Structural glazing
Insert units and infill panels
Schüco AWS 102
Schüco AWS 102.NI
Schüco AWS 70 / 70.HI - window
Schüco AWS 75.HI - window
Schüco AWS 75.SI - window
Schüco AWS 75 BS / 75 BS.HI - window
Royal S 47D - roof vent
Royal S 88D / 106D - roof vent
Royal S 65 - door
Royal S 70 / 70.HI - door
Royal S 75.HI - door
Schüco Firestop II - T30 - door
VacuTherm high-insulation panel
Schüco spandrel panel W90 - fire-resistant panel
SunControl - large blade solar shading
External blinds
Photovoltaic modules
Security
Fire protection
Burglar resistance
Bullet resistance
Blast resistance
Schüco 59Rezumat
Overview
Utilizarea sistemelor pentru faţade şi luminatoare System matrix for façades and skylights
�
�
Tipul construcţiei
Izolare termică superioară
Izolat termic
Neizolat
Faţade
Faţadă cortină
Faţadă caldă
Faţadă cald/rece
Faţadă ventilată
Luminator
Faţadă structurală
Elemente mobile şi paneluri
Schüco AWS 102
Schüco AWS 102.NI
Schüco AWS 70 / 70.HI - Fereastră
Schüco AWS 75.HI - Fereastră
Schüco AWS 75.SI - Fereastră
Schüco AWS 75 BS / 75 BS.HI - Fereastră
Royal S 47D - Fereastră de acoperiş
Royal S 88D / 106D - Fereastră de acoperiş
Royal S 65 - Uşă
Royal S 70 / 70.HI - Uşă
Royal S 75.HI - Uşă
Schüco Firestop II - T30 - Uşă
VacuTherm - Panel superizolat termicSchüco
Brüstung W90 - Panel rezistent la foc
SunControl - Protecţie solară cu lamele mari
Jaluzele
Module fotovoltaice
Siguranţă
Antifoc
Antiefracţie
Antiglonţ
Antiexpoziv
��� � ��
��� � ��
��� � ��
���
��
�
��
��
��� �
���
��
� �
��� � �
���
�
��� � �
��� � �
��� � �
�� � � �
��� �
��� � �
��
�
��� � �
�
�
�
FW 6
0+
FW 5
0+
FW 5
0+AO
S / A
OT
FW 6
0+AO
S / A
OT
FW 5
0+BF
/ FW
60+
BF
FW 5
0+S
FW 5
0+DK
FW 5
0+AR
CFW
50+
SG /
FW 6
0+SG
SG 5
0NSk
yLin
e S
65
SkyL
ine
C 65
Ca lider de piaţă europeanSchüco este specialist în înve-lişuri multifuncţionale pentru clă-diri. Arhitecţii şi prelucrătoriiprofită, colaborând cu Schücode detaliile perfecte şi de siste-mele verificate în mulţi ani depractică. Numele Schüco este,de mai mult de cinci decenii,echivalent cu garanţia calităţii şiinovaţia permanentă, valorificatărapid şi eficient de către antre-prenori şi investitori.
As market leader in Europe,Schüco is a specialist in multi-functional building envelopes.When working with Schüco, architects and fabricators alikecan benefit from sophisticatedsystems and painstaking attention to detail. The Schücobrand stands for more than fivedecades of consistently high levels of quality and innovation,which quickly pay dividends forclients and investors.
�
��� � �
� �� �
�
� �� �
��� � �� � �� �
�
�
� �
��
�
�
�
�
� �
� �
� �
� ��
�
� �� �
� �
� �
�
�
� �
� �
�
� �
� �
�
�
� �
� �
�� � � � � � �
�
Competenţa de sistem SchücoSchüco system expertise
top related