screen displays during alarm display and confirmation reading …€¦ · • lowest recorded...

Reading the history Option 1: Read out day per day directly on the device (30-day history)

Alarm display and confirmation options

With this option the alarms will be visible on the display with an alarm symbol for 30 days. By pressing the READ button, the warning symbol ! will be disabled for the corresponding alarms. The alarm symbol cannot be canceled nor reset.• In this mode only one upper and one lower alarm will

be triggered per day.• The alarm symbol will be present on the display for

30 days.• The warning symbol ! will disappear when confirming

all existing alarms in the readout mode.

The alarms are shown with the alarm symbol until all alarms (in the 30-day history) have been confirmed as solved by pressing the READ button. Afterwards the display will show the OK symbol until a new alarm is triggered.Confirmation: Device is within the set alarm limits.Press the READ button and the alarm symbol and the warning symbol ! will immediately disappear. A new alarm will be triggered as soon as the set alarm limits are exceeded again.Confirmation: Device is outside the set alarm limits.If the READ button is pressed still during a temperature violation the alarm symbol and the warning symbol ! will stay on the display for the corresponding alarm.

Example of an OK display

Press READ.

Example of an alarm display

Press READ a second time.

Note: Continue pressing the READ button to read out the details of the past 30 days. Pressing SET in the „Read out Mode“ brings you back to the „Measurement Mode“.

The following information is indicated on the screen:• The alarm- and the warning symbol !

• The corresponding flashing arrow (alarm indicator) (example: Temperature out of lower alarm limit)

• The date of alarm:16082019• The time of alarm:1821

The following additional information is indicated on the screen:• Lowest recorded temperature of that day: -1.1 ° C• The duration out the exceedance of the preset low

temperature limit: 01:35 (hrs:min)• Temperature recording in this example with internal

sensor

The following information is indicated on the display:• The OK symbol • The corresponding flashing arrow

(example: high arrow “today”)• The highest recorded temperature of that day: 05 • The time duration out of the preset temperature

high limit: (hrs:min)• Temperature recording in this example with internal

sensor

0510 320max.

°C

Int.Sensor

2nd display

1st display

Press READ once.

9101 2086

1 218!

- 110 351 min.

Int.Sensor

! °C

Indication of anOK display

Indication of analarm display

9101 2086561 473 °C

Int.Sensor

9101 2086

881 425 °C

Int.Sensor

!

In measurement mode, when an alarm has been trig-gered, the following information is indicated:• The alarm symbol • An additional warning symbol !

• The corresponding arrow (alarm indicator), upper/lower alarm

• The current date and time: 6082019/542• The current temperature: 88

In measurement mode, when no alarm has been trig-gered, the following information is indicated:• The OK symbol • The current date and time:16082019/347• The current temperature: 56

Screen displays during measurement mode

Option 2 - Alarm indication “unconfirmed alarms”

Option 1 - Alarm indication “all alarms”

Connect the device via USB with your PC/MAC.

The display indicates the word LOC for a period of 10 minutes (factory preset), during this time the device does not measure the temperature to avoid false readings. Place the device immediately to the supervised goods.

Note: Disconnect the external sensor from the device first.

The Fridge-tag will now generate a PDF and ASCII report of max. 30 or 60 days (optional factory setting). This process can take up to 30 seconds.

yyyd y__d

Note: Press and hold the READ button again for at least 3 seconds and the next alarm event will appear on the screen.

Option 2: Read out alarms directly on the deviceAlarm-Super-Jump function (30-day history)

Press and hold READ for 3 seconds.

Qui

ck In

fo -

Use

r Gui

de

EN

The continuously appea-ring arrows in the upper display area indicate that the device is processing.

This process must not be interrupted until the OK symbol appears on the display. This indi-cates that the creation of the ASCII and PDF files has been success-fully completed.

5 5

Back to normal operationInternal sensor

!9101 2086

1 218

Int. SensorOption 3: Read out data with a computer

internal/external sensor

User Guide Fridge-tag® 2Fridge-tag® 2 E

Please connect the device with the external sensor again. After 10 minutes (factory standard) without a connection between the device and the external sensor: • The whole display starts blinking.• Pressing READ will stop the display from blinking.More details see chapter “Connection error” in the Quick Info “Set Up Fridge-tag 2 + 2 E”.

External sensor

For more information read the online user manual www.berlinger.com/user-manual-fridge-tag

Berlinger & Co. AGMitteldorfstrasse 29608 GanterschwilSwitzerland

Tel. +41 71 982 88 11info@berlinger.comwww.berlinger.com 400-01140_1

Scan QR Code for User Manual