secondary belt cleaner - asgco...f-tip c-tip v-tip urethane blade xc ceramic blade duo-spring™...
Post on 02-Feb-2021
11 Views
Preview:
TRANSCRIPT
-
® RAZOR-BACK
Secondary Belt Cleaner
®Razor-Back secondary belt cleaner features tough self-adjusting replaceable tungsten carbide blades (non-carbide also available) for extremely effective belt cleaning.
• - tungsten carbide blades provides and maintains Longwearing Abrasion Resistant a great cleaning edge against the belt.
• - tension each individual blade to the belt for aImpact Absorbing Tension Cushions controlled and effective belt cleaning across the entire width of the belt.
• - allows for an installation that requires less then 9” of clearance Compact Design to be installed and maintained.
• - The Razor-Back can be installed on belts with me-Mechanical Splices? No Problem ®
chanical splices, due to the laid-back wiping blade angle and impact- absorbing tensioning cushions, allowing the mechanical splices to pass without damaging the belt cleaner or the splice.
• - Available with ™ ™ ™Bolt-Up , Duo-Spring , or Spring-Shoc Tensioning Systems
• - Available with Optional Spray-Bar. Spray nozzle sizes can be customized for any desired spray pattern and water pressure.
PRODUCT SPECIFICATIONS
Maximum Belt Speed - 1000 fpm (5.0 m/sec)
Application Coal Fired Power Plants, Hard Rock Mining, -
Steel Mills, Iron Ore, Aggregate and Mineral
(Phosphate, Potash, Salt) Mining.
Shown with ™Duo-Spring
Tensioner
-
1
2
3
4
5
6
7
1. Mounting Bracket
2. Slide Block
3. Thru-Hole Spring Bushing
4. Compressions Spring
5. Thread Push-Up Plate
6. Push-Up ACME Adjustment
7. Push-Up Spring Bushing
Other Available Tensioners
®RAZOR-BACK ™ Also available with Spring-Shoc Tensioner
™Spring-Shoc Secondary Tensioner ®developed by ASGCO “Complete Conveyor
Solutions”, utilizes a unique patent pending mounting plate that allows the cleaning
blade to be spring tensioned in either a pull-up or push-up position. This specially
designed configurability features two different mounting options that leave extra
clearance above or below the bracket where necessary.
Available Blade Tips
F-Tip C-Tip V-Tip UrethaneBlade
XC Ceramic Blade
™Duo-Spring ™Bolt-Up
®Razor-Back with Spray Bar®Razor-Back with Spray Bar is a secondary belt cleaner that uses a row of spray nozzles to spray
a fine sharp stream of water at a 30° degree angle onto the conveyor belt where the carry-back material is difficult to remove. Water is applied to the belt in an overlapping spray pattern which places the particles into a fluid suspension, while moistening the belt. The blades of the Razor-
®Back with Spray Bar are then able to make consistent contact with the conveyor belt surface to remove nearly 98% or more of bulk material coarse carry-back.
Advantages• Lubricate the conveyor - belt/cleaners interface and require much lighter tensioning.• Fully adjustable sprays - are built in enabling installation in the tightest of spaces.• Performance - is improved by a minimum of 75% over similar dry systems and maintenance is reduced because of the lubricating action of the water.• Customized spray nozzle - can be sized for any desired spray pattern and water pressure.• - can be replaced which provides a long service life with a high level Tungsten carbide tips of resistance to impact damage and/or acid leaching.
®Razor-Back
™with Bolt-Up Tensioner and Spray Bar
Part NumberBelt Width Wt.
Lbs.in mm
®Razor-Back Mounting Tube
ASG-RBMT-18 18 450 0ASG-RBMT-24 24 600 0ASG-RBMT-30 30 750 0ASG-RBMT-36 36 900 0ASG-RBMT-42 42 1070 0ASG-RBMT-48 48 1200 0ASG-RBMT-54 54 1350 0ASG-RBMT-60 60 1500 0ASG-RBMT-72 72 1800 0ASG-RBMT-84 84 2100 0ASG-RBMT-96 96 2400 0
Part NumberBelt Width Wt.
Lbs.in mm
®Razor-Back Blade Holder
ASG-RBBH-18 18 450 0ASG-RBBH-24 24 600 0ASG-RBBH-30 30 750 0ASG-RBBH-36 36 900 0ASG-RBBH-42 42 1070 0ASG-RBBH-48 48 1200 0ASG-RBBH-54 54 1350 0ASG-RBBH-60 60 1500 0ASG-RBBH-72 72 1800 0ASG-RBBH-84 84 2100 0ASG-RBBH-96 96 2400 0
®Razor-Back System
X: AR (F-Tip)
X: TC-C (C-Tip)
X: TC (V-Tip)
X: CER (XC- Ceramic Blade)
X: UB (Urethane Blade)
XX ™: BU (Bolt-Up Tensioner)
XX ™: RSS (Duo-Spring Tensioner)
XX ™: ST (Spring-Shoc Tensioner)
M-RB -SYS-18- 18 450X XXM-RB -SYS-24- 24 600X XXM-RB -SYS-30- 30 750X XXM-RB -SYS-36- 36 900X XXM-RB -SYS-42- 42 1070X XXM-RB -SYS-48- 48 1200X XXM-RB -SYS-54- 54 1350X XXM-RB -SYS-60- 60 1500X XXM-RB -SYS-66- 66 1600X XXM-RB -SYS-72- 72 1800X XXM-RB -SYS-84- 84 2100X XX
BW - Belt Width
Part Number
®Razor-Back Replacement Parts
ASG-BLD-RZ-6-AR F-Tip Blade
ASG-BLD-NW3-6-TC-C C-Tip Blade
ASG-BLD-RZ-6-TC V-Tip Blade
M-ASG-CUS-CER-6 XC-Ceramic
ASG-BLD-RZ-6-U Urethane Blade
ASG-CUS-RZ-6C Blade Cushion
ASG-SPRAYBAR-[BW] Spraybar
Description
®Razor-Back Spray Bar
Part Numberin mm
Belt Width
®© 6/2015 ASGCO “Complete Conveyor Solutions”
top related