secure the ez-io™ tape and tag! monitor the infusion site ! attach wristband

Secure the EZ-IO™Tape and Tag!

Monitor the infusion site !Attach wristbandAttach wristband

To remove the EZ-IO™ catheter, grasp hub and rotate clockwise while gently pulling. You may

consider attaching a syringe for this purpose.

Remove the catheter within 24 hours

DO NOT ROCKDO NOT ROCKOR BEND THE OR BEND THE

CATHETERCATHETER

MAINTAINMAINTAINA 90 DEGREEA 90 DEGREE

ANGLE ANGLE

Once catheter has been removed dress site with antibiotic ointment and Band-Aid

Possible complications of IO Extravasation

Dislodgment

Compartment Syndrome

Fracture

Pain

Reduced Flow

Infection

Care & MaintenanceCare & Maintenance

Cleaning & Disinfecting Cleaning & Disinfecting Wipe clean with moistened cloth - removing

large contaminants

Spray with anti-microbial solution - follow manufacturer

instructions

Momentarily depress trigger several times during cleaning

Remove battery cap (if necessary) - and clean seal

Clean around drive shaft with cotton applicator - check drive shaft

tip to ensure nothing has attached to the magnetic tip

Wipe dry

Inspect driver and return to case

DO NOT SUBMERGE DRIVER AT ANY TIME

Wipe clean with moistened cloth - removing large contaminants

Spray with anti-microbial solution - follow manufacturer

instructions

Momentarily depress trigger several times during cleaning

Remove battery cap (if necessary) - and clean seal

Clean around drive shaft with cotton applicator - check drive shaft

tip to ensure nothing has attached to the magnetic tip

Wipe dry

Inspect driver and return to case

DO NOT SUBMERGE DRIVER AT ANY TIME