sempell product overview safety...
Post on 22-Apr-2018
296 Views
Preview:
TRANSCRIPT
ǀ 3 Sempell ǀ Product overview SAFetY vAlveS
peNTAIRvAlveS & coNtrolS
peNTAIR VAlVeS & CONTROlS IS THe NAme BeHIND THe WORlD’S mOST COmpReHeNSIVe RANGe OF VAlVeS, ACTUATORS AND ASSOCIATeD FlOW CONTROl pRODUCTS. Supplying a host of leading global brands, we work closely with the oil & gas, power generation, mining, chemical, food & beverage and marine industries, so we can anticipate their needs and exceed their expectations at every level. eXcelleNce iN eNGiNeeriNG At pentair valves & controls our position as the technology leader in flow control is solidified by the collective resources of our brands. utilising the latest systems and technology, our specialists produce the highest quality flow products at competitive market pricing.
QuAlitY pHiloSopHY A strong commitment to maintaining and improving the quality of both product performance and customer service is inherent within our management policy. our factories and Q.A. procedures are inspected and audited regularly by major quality
authorities such as llody register, BSi, Bureau veritas, and tÜv, and are in compliance with eN iSo 9000:2000. ApplicAtioN SolutioNS working closely with industry contractors and users, pentair valves & controls engineers are able to develop specific proposals for individual process requirements - by combining advanced technology with outstanding engineering expertise. proJect pAcKAGeS the extensive range of product types enables pentair valves & controls to propose and supply integrated project packages. Simplify your supply chain by including pentair as an approved vendor.
ANYwHere iN tHe world what’s more, pentair’s products can be found at work in every corner of the globe with 30,000 people worldwide, working with clients and partners on six continents. our flow management solutions are backed by unrivalled customer services, experience and support.
A GlOBAl NETWORK OF INTERNATIONAL BRANDS
ǀ 5 Sempell ǀ Product overview SAFetY vAlveS
SempellA comPANY with trAditioNS
Sempell BeNeFitS From more tHAN 130 YeArS oF eXperieNce ANd SiNce tHeN ServeS itS power cuStomerS witH optimAl SolutioNS iN All cASeS wHere HiGH preSSure, eXtreme temperAtureS ANd criticAl propertieS eXit, eSpeciAllY wHere HiGH SAFetY reGulAtioNS Are reQuired.
Sempell delivers control, safety relief and isolation valves to conventional and nuclear power plants.
with decades of expertise in thermodynamics, Sempell provides turbine bypass and startup control valves with unparalleled reliability to the oem’s plant design engineer for applications in supercritical and ultra-supercritical power plants.
in addition, Sempell forged gate, globe and check valves serve the diN and ASme power generation markets. Applying cutting edge material science and valve designs, Sempell isolation and non-return valves are designed for all types of power plants, including nuclear and supercritical plants, which operate at temperatures up to 720° c.
within the nuclear power generation segment, Sempell pioneered new technology for pilot operated pressurizer safety valve systems on the new GeN iii reactors, regardless of code. Sempell also provides other critical solutions for the nuclear industry, including system medium operated main steam isolation valves and pilot operated main steam safety valves.
Finally, the quality and experience of Sempell’s service organization is unequaled. with a complete range of spare parts, as well as maintenance, mobile machining, in-line testing, planning and engineering capabilities, you can count on Sempell to keep your plant running at a high level of efficiency.
HISTORy
1874 First valve produced in mönchengladbach1980 company relocated to new premises in Korschenbroich1991 deutsche Babcock AG, oberhausen aquired Sempell AG1997 incorporated within the Flow control division of tyco international Group of companies - Sempell AG and Sempell Armaturen Service GmbH1999 leading manufacturing plant within the new tyco Flow control engineered products Group2004 dewrANce is merged into Sempell AG by keeping brand and products2009 iNtervAlve is merged into Sempell AG by keeping brand and products2011 opening of the extention plant west2012 Sempell was changed from Sempell AG to Sempell GmbH2013 merger of tyco international’s business unit Flow control with pentair.
140 years of experience & success
ǀ 7 Sempell ǀ Product overview SAFetY vAlveS
For very small blow-off capacities and for protection of liquids, safety valves with small diameters, also call thermal expansion valves, are used.
For valves sizing and selection, the Sempell software package “BABSY” is available.
HISTORy1874 Foundation1962 Sempell gets the first tÜv type test certificate in Germany1963 First type test of controlled safety valves1967 First in situ test device for safety valves1983 Spring operated safety valves get pneumatically assisted1985 Safety valves in disc spring design1989 uv-Stamp for Sempell as first German manufacturer1993 SeSiteSt automatisation by computerisation with pc1994 Serie S is first safety valve with tÜv type test and uv-Stamp2000 Sempell is certified as first German valve manufacturer according to pressure equipment directive
SAFeTy VAlVeS
Safety valves are used to protect systems against overpressure and to blow-off the required capacity of the system medium. the requirements for safety relief valves on boilers application are described in trd 421 and the uS code ASme Section i. For process industry the standards are Ad 2000 resp. ASme viii.
together with the pressure equipment directive a complete set of european standards will be established. the standard iSo eN 4126 part 1 to 7 defines the different types of safety devices.
in the process industry besides spring loaded safety valves also pilot operated valves are used.
For the protection of boilers – because of the high operation forces – the use of disc type springs enables to install large loaded safety valves also on high pressures. According to the German standards these safety valves will in most cases be equipped with a pneumatic actuator where a supplementary closing force is obtained and the valve can be opened at pressure below. By means of these pneumatic support, – i.e. superheater and reheater safety – valves, with high pressure loss at the inlet, can be kept in a stable open position.
in addition, Sempell offers pilot operated safety valves, which are medium operated according to the relieving principle.
8 ǀ Sempell ǀ Product overview SAFetY vAlveS8 ǀ Sempell ǀ product overview SAFetY vAlveS
TypE MINI S SMALL RELIEF vALvE - LOW pRESSuRE
DeSIGNFlanges and threads according to DIN and ASMESMC – conventionalSMB – balanced bellows
pReSSURe RATING INleTpN 10 - 63 / class 150 - 300
DIAmeTeR INleTDN 15 - 25 / ½” - 1”
SeT pReSSURe1 - 52 bar
ORIFICe DIAmeTeR14mm
BODy mATeRIAl1.0619 / SA 216 WCB1.4408 / SA 351 CF8M
ACCeSSORIeSSoft seat, lifting lever, test gag, reinforced bellows
DeSIGNFlanges and threads according to DIN and ASMEConventional type
pReSSURe RATING INleTpN 10 – 400 / class 150 – 2500
DIAmeTeR INleTDN 15 - 25 / ½” - 1”
SeT pReSSURe1 – 440 bar
ORIFICe DIAmeTeR7.5 and 9 mm
BODy mATeRIAl304 SS
ACCeSSORIeSSoft seat, lifting lever, test gag
SpRINg LOADED SAFETy vALvES
TypE vSE0 SMALL RELIEF vALvE - hIgh pRESSuRE
ǀ 9 Sempell ǀ Product overview SAFetY vAlveS
DeSIGNSC – closed bonnetSB – balanced bellowsSO – open bonnet
pReSSURe RATING INleTpN 10 – 400
INleT SIzeDN 25 – 200
SeT pReSSURe0.2 – 500 bar
ORIFICe DIAmeTeR14 – 160 mm
BODy mATeRIAlStandard 1.0619high temperature 1.7357Low temperature 1.1138 / 1.4408Austenitic SS 1.4408 / 1.4552Duplex, Monel, hastelloy
ACCeSSORIeSCooling spacer, balance piston, lifting lever, test gag, position indicator, reinforced bellows
Capacities and dimension according to ApI 526
DeSIGNSC – closed bonnetSB – balanced bellowsSO – open bonnet
pReSSURe RATING INleTClass 150 – 2500
DIAmeTeR INleT1” – 8”
SeT pReSSURe1 – 427 bar
ORIFICe DIAmeTeR10.5 – 160 mm
BODy mATeRIAlStandard 1.0619 / SA 216 WCBhigh temperature 1.7357 / SA 217 WC6Low temperature 1.1138 / SA 352 LCBAustenitic SS 1.4408 / SA 351 CF8MDuplex, Monel, hastelloy
ACCeSSORIeSCooling spaces, balance piston, lifting lever, test gag, position indicator, soft seat etc.
TypE S-DINSAFETy RELIEF vALvE - SERIES S WITh DIN FLANgES
TypE S-ApISAFETy RELIEF vALvE - SERIES S WITh ASME FLANgES
SpRINg LOADED SAFETy vALvES
10 ǀ Sempell ǀ Product overview SAFetY vAlveSSempell ǀ product overview SAFetY vAlveS10 ǀ
Flanges according to DIN and welding ends, large connections enable long piping
DeSIGNvSE1 open bonnetvSE2 conventionalvSE4 weight loaded for small pressuresvSE5 balanced bellowsvSR…with adjustable blowdown
pReSSURe RATING INleTpN 10 – 400
DIAmeTeR INleTDN 25 – 200
SeT pReSSURe0.5 – 500 bar
ORIFICe DIAmeTeR13 – 125 mm
BODy mATeRIAlStandard 1.0619 high temperature 1.7357Austenitic 1.4308 / 1.4581
ACCeSSORIeSCooling spaces, balance piston, lifting lever, test gag, position indicator, soft seat
Flanges according to DIN and ASME, welding ends
DeSIGNSC – closed bonnetSB – balanced bellowsSO – open bonnet
pReSSURe RATING INleTpN 10 – 40 / class 150 – 300
DIAmeTeR INleTDN 250 – 600 / 10” – 24”
SeT pReSSURe0.3 – 24 bar
ORIFICe DIAmeTeR185 – 438 mm (orifice T1 – Z)
BODy mATeRIAlStandard 1.0619 / SA 216 WCBhigh temperature 1.7357 / SA 217 WC6Low temperature 1.1138 / SA 352 LCBAustentic SS 1.4408 / SA 351 CF8M
ACCeSSORIeSCooling spaces, balance piston, lifting lever, test gag, position indicator
TypE vSE/ vSR – SAFETy RELIEF vALvE WITh LARgE DIN CONNECTIONS
TypE MAxI S hIgh CApACITy RELIEF vALvE – ABOvE ORIFICE T
SpRINg LOADED SAFETy vALvES
ǀ 11 Sempell ǀ Product overview SAFetY vAlveS
Welding ends, flanges according to DIN and ASME
DeSIGNOpen bonnetBalanced pistonhelical spring typepneumatically assisted
DIAmeTeR INleTDN 80 – 300 / 3” – 12”
SeT pReSSURe10 – 320 bar
ORIFICe DIAmeTeR38 – 205 mm
BODy mATeRIAlA105 / A216WCBA182F12 / A217WC6A182F22 / A217WC9A182F91
ACCeSSORIeSposition indicator
Welding ends, flanges according to DIN and ASME
DeSIGNOpen bonnetBalanced pistonDisc spring typepneumatically assisted
DIAmeTeR INleTDN 150 – 600 / 6” – 24”
SeT pReSSURe10 – 320 bar
ORIFICe DIAmeTeR80 – 438 mm
BODy mATeRIAlA105 / A216WCB1.7335 / 1.73571.7380 / 1.73791.4903
ACCeSSORIeSposition indicator
SpRINg LOADED SAFETy vALvES
TypE SOh – hIgh pRESSuRE RELIEF vALvE, hELICAL SpRINg
TypE SOT – hIgh pRESSuRE RELIEF vALvE, DISC SpRINg
12 ǀ Sempell ǀ Product overview SAFetY vAlveSSempell ǀ product overview SAFetY vAlveS12 ǀ
TypE STE4 ELECTRO pNEuMATIC CONTROL uNIT FOR SpRINg LOADED SAFETy vALvES
The efficiency of plant operation can be increased by application of pneumatically assisted operation on a spring loaded safety valve. The advantages of direct acting safety valve will be combined with the advantages of controlled safety valves. With the control unit STE4 a fully TÜv type tested system is available. All control paths are three times redundant and the unit is working according to the fail safe principle. The functions pressure sensing, electrical control and pneumatic operation are split in separate housings. This modular design enables a high flexibility in difficult conditions, i.e. long distances or specific safety requirements.
- high tightness up to set pressure by supplementary loading - Small opening and closing
pressure differences - blow down widely adjustable - high setting accuracy and
reproducibility - Lifting of the safety valve also
below set pressure possible - pressure setting of safety
valve during normal plant operation - Check of the control function
without operation of the safety valve - No electrical energy supply
necessary - Ideally suitable for explosion
protection - With one unit more than
one safety valve can be operated
The efficiency of plant operation can be increased by application of pneumatically assisted operation on a spring loaded safety valve. The advantages of direct acting safety valve will be combined with the advantages of controlled safety valves With the control unit STE5 a fully TÜv type tested system is available.All control paths are three times redundant and the unit is working according to the fail safe principle. - high tightness up to set
pressure by supplementary loading - Small opening and closing
pressure differences - high setting accuracy and
reproducibility - Lifting of the safety valve also
below set pressure possible - pressure setting of safety
valve during normal plant operation - Check of the control function
without operation of the safety valve - No electrical energy supply
necessary - Ideally suitable for explosion
protection - System pressure shown at
pressure switch - With one unit more than
one safety valve can be operated
CONTROL uNITS FOR SpRINg LOADED SAFETy vALvES
TypE STE5 pNEuMATIC CONTROL uNIT FOR SpRINg LOADED SAFETy vALvES
ǀ 13 Sempell ǀ Product overview SAFetY vAlveS
hydraulically operated safety valves protect preferably the of super-heater as well as the re-heater in power stations. In comparison to the use of spring loaded safety valves the number of installed components can be reduced drastically.
On the super-heater the control function of the hp bypassstation will be combined according to TRD with the safety function. The re-heater is usually protected by a safety valve type vSh.
- high tightness up to set pressure due to high closing forces - Small opening and closing
pressure differences - Reseating pressure widely
adjustable - high setting accuracy and
reproducibility - Function independent
of pressure losses in connected pipes - high back pressure by silencer
possible - Opening of the safety valve
possible from 0 bar system pressure - Ideally suitable for sliding
pressure plant operation - Safety function can be
combined with control function - Test of the control function
without opening of the safety valve - With one unit more than
one safety valve can be operated
TypE STE6CONTROL uNIT FOR hyDRAuLICALLy OpERATED SAFETy vALvES
CONTROL uNITS FOR hyDRAuLICALLy OpERATED SAFETy vALvES
Buttwelding ends
DeSIGNControlled safety valve, hydraulically closed, in safety case opened by pressure and spring
DIAmeTeR INleTDN 80 – 600 / 3” – 24”
SeT pReSSURe40 – 320 bar
ORIFICe DIAmeTeR40 – 323 mm
BODy mATeRIAlA182F12 / A217WC6A182F22 / A217WC9A182F91
ACCeSSORIeSposition indicator
TypE vShhyDRAuLICALLy OpERATED SAFETy vALvE
14 ǀ Sempell ǀ Product overview SAFetY vAlveSSempell ǀ product overview SAFetY vAlveS14 ǀ
Medium operated safety valve for extra large capacities
buttwelding ends
TÜv type tested certified for gas and steam (special: two phase mixture for nuclear service)
DIAmeTeR INleTDN 100 – 750 / 4” – 30”
SeT pReSSURe5 – 320 bar
ORIFICe DIAmeTeR44 – 438 mm
BODy mATeRIAlA105 / A182F12182F22 / A182F91
ACCeSSORIeSposition indicator, vacuum spring
TypE vS99 pILOT OpERATED SAFETy vALvE
CONTROL uNITS FOR pILOT OpERATED SAFETy vALvES
The efficiency of plant operation can be increased by applicationof pneumatically assisted operation on a spring loadedsafety valve. The advantages of direct acting safety valve willbe combined with the advantages of controlled safety valves.With the control unit STE4 a fully TÜv type tested system isavailable. All control paths are three times redundant and theunit is working according to the fail safe principle. The functionspressure sensing, electrical control and pneumatic operationare split in separate housings. This modular designenables a high flexibility in difficult conditions, i.e. long distances or specific safety requirements.
- high tightness up to set pressure by supplementary loading - Small opening and closing
pressure differences - blow down widely adjustable - high setting accuracy and
reproducibility - Lifting of the safety valve also
below set pressure possible - pressure setting of safety
valve during normal plant - operation - Check of the control function
without operation of the safety valve - With one unit more than
one safety valve can be operated
TypE STE1-3CONTROL uNIT FOR pILOT OpERATED SAFETy vALvES
ǀ 15 Sempell ǀ Product overview SAFetY vAlveS
used only with safety valves vS99
DeSIGNSteam pilot, spring loaded
BODy mATeRIAlA216WCB / A217WC6
ACCeSSORIeSSolenoid as supplementary load, position indicators
QUAlIFICATIONTÜv type tested certified (also nuclear service)
DeSIGNSolenoid pilot, indirect acting for steam and water serviceEMS3 de-energized openEMS4 energized openEMF flanged version
BODy mATeRIAlA105 / A182F12
ACCeSSORIeSposition indicator, available for different voltages
CONTROL uNITS FOR pILOT OpERATED SAFETy vALvES
TypE vS66 SpRINg LOADED pILOT vALvE
Type EMS Solenoid pilot valve
16 ǀ Sempell ǀ Product overview SAFetY vAlveSSempell ǀ product overview SAFetY vAlveS16 ǀ
COMBINED ACTuATOR WITh CONTROL uNITS
ApplICATIONThe electro pneumatic Relief Valve (EpRv) is designed to provide automatic or manual overpressure protection for steam boilers. It is configured for dependable service in superheated and saturated steam applications.
FeATUReS AND BeNeFITS - Small opening and closing pressure difference - high reproducibility - Lifting of the SEp also below set pressure possible - Adjustment control of the SEp without changing the system
pressure - Check of the control function without response of the SEp - System pressure signal at pressure switch - Compact - Easy to operate - very ruggedly design for high pressure and temperature - With removable seat insert, replacing the seat without develop
the body (option) - Simple replacement of parts, no special tools necessary.
TeCHNICAl DATAStandard size: 2 ½” - 4”pressure: up to 350 barg (5000 psig)Temperature: up to 630°C (1150°F)Connection: Flanged or weldedBody material: A105, A182 F11, A182 F22, A182 F91, A182 F92Activation: pneumatic
TypE EpRvA COMBINATION OF ThE pNEuMATIC ACTuATED RELIEF vALvE TypE SEp WITh ThE CONTROL uNIT TypE STE8
ǀ 17 Sempell ǀ Product overview SAFetY vAlveS
TypE SESITEST MOBILE TEST EquIpMENT FOR SAFETy vALvES
With SESITEST time and costs can be reduced significantly during plant shut-down.
SESITEST enables the accurate assessment of set-pressure and other safety valve functional characteristics in situ under normal operating plant conditions. With SESITEST there is no need to raise the line pressure or to remove the valve from the plant.
An air operated, low friction piston entes an opening force to the stem of the safety valve. This force makes up the difference between the system pressure and the set pressure. The signals are recorded on the connected Computer and the valve characteristics are determined automatically online. The system is very open, all signals can be visualized each time and there are many tools available for analysis and documentation.
The software SESI has been specially designed by SEMpELL and incorporates our vast experience in operating and testing safety relief valves. The software also allows the selection of various test sequences and output documentation formats, and includes a database in which valve identification and test data can be stored furthermore additional graphical analysis and calculations can be carried out with our software package.
SAFETy vALvE TESTINg
18 ǀ Sempell ǀ Product overview SAFetY vAlveSSempell ǀ product overview SAFetY vAlveS18 ǀ Sempell ǀ product overview SAFetY vAlveS18 ǀ
ǀ 19 Sempell ǀ Product overview SAFetY vAlveS
ENgINEERINg COMpANIES
ABB Lummus/germanyAlstom/France/germanyBabcock Borsig power/germanyBechtel/uSAFluor Daniel/uSA/NetherlandFormosa heavy Industries/KoreaFortum/FinlandFoster Wheeler/uK/Finlandhitachi/Japan/uKKellogg/uSA/uK/NetherlandKværner/NorwayLinde/germanyLurgi/germanyNuovo pignone/ItalySiemens Westinghouse/germanyTechnip/germany/France/ChinaToshiba/Japan/uKTractebel/Belgium/germany/Taiwanuhde/germany/IndiaWintershall/germany
pOWER pLANTS pROCESS INDuSTRy
Al Taweelah/Abu DhabiAvedøre/DenmarkBelawan/IndonesiaBoxberg/germanyCeran/polandEnBW/germanyE.ON/germanyFarakka/IndiagEW Köln/germanygrangemouth/uKIskenderun/TurkeyKEpCO/KoreaLippendorf/germanyMeliti Achlada/greecepublic power/greeceRWE/germanySeraya/SingaporeStadtwerke Düsseldorf/germanyStadtwerke München/germanySteag/germanySüdzucker/germanyTurow/polandvalle de Mexico/Mexicovattenfall/SwedenWai goa qiao/ChinaZander/germany
Air Liquide/France/germanyAir products/germany/uKAkzo/germany/NetherlandAsean Bintulu-petronas/MalaysiaBasell/germanyBASF/germany/BelgiumBayer/germanyBEB/germanyBoehringer/germanyBorealis/AustriaBp/germany/uKDEA/germanyDegussa/germany/BelgiumDOW/Netherland/germany/portugalDSM/NetherlandELF/germany/FranceEsser Oy/FinlandLitvínov/Czech RepublicMaersk/DenmarkMesser griesheim/germanyMiro/germanyMobil/germanyMol/hungaryMotor Oil hellas/greecepetroba’s petroleo/Brasiliapłock/polandqafco/quatarRuhr Oel/germany/SwedenSchering/germanyShell/germany/Netherland/uK/BelgiumStatoil/NorwayThyssen-Krupp/germanyTÜpRAS/TurkeyWacker-Chemie/germany
AppROvALS AND STANDARDS
ISO 9001:2008ISO 14001:2004OhSAS 18001:2007pEDASME vIII - uv certificationAD 2000-hp 0 ATEx 95TRB 810 Nr. 45TRD 110BS 6759uDTgOSTITIStoomwezen
REFERENCES, AppROvALS AND STANDARDS
peNTAIR VAlVeS & CONTROlSSEMpELL MANuFACTuRINg pLANT, WERNER-vON-SIEMENS STR., 41352 KORSChENBROICh, gERMANy WWW.pENTAIR.COM/vALvES · WWW.SEMpELL.COMAll pentair trademarks and logos are owned by pentair Inc. All other brand or product names are trademarks or registered marks of their respective owner. Be-cause we are continuously improving our products and services, pentair reserves the right to change product designs and specifications without notice. pentair is an equal opportunity employer. © 2013 pentair Inc. All Rights Reserved.
SEM-SAFETy-2014-05
top related