september 17, 2014 wednesday morning 08:30-12:00

FINAL PROGRAM

THE 18TH WORLD CONGRESS OF CIGR

AGRICULTURAL AND BIOSYSTEMS ENGINEERING - UPGRADING THE QUALITY OF OUR LIFE

SEPTEMBER 16TH-19TH, 2014

BEIJING, CHINA

GENERAL INFORMATIONVENUEChina National Convention Center (CNCC)Address:No.7 Tianchen East Road, Olympic Green, Chaoyang District, Beijing 100105, China

WEATHERThe weather in mid-September in Beijing is comparatively moderate and the average day temperature is about 15-27ºC (55-80 ºF).

ARRIVAL IN BEIJINGThe Congress will not arrange the pick-up services at the Beijing Capital International Airport. Participants could take the taxi, Beijing Airport Express (shuttle bus) and Beijing Subway Airport Line to CNCC and the hotels you booked.

The taxi service is available at the Capital Airport during the whole day.

In addition, you could take Beijing Airport Express Line 6 and get off at the station of Best Western OL Stadium Hotel. Participants can take Beijing Airport Express Line 5 and get off at the station of YA YUN CUN to arrive at Yayuncun hotel. The operation time for Beijing Airport Express Line 5 and 6 is 7:00-24:00, 8:00-21:00, and each bus will depart from the airport in every 30-40 minutes. The bus tickets are available at the Beijing Airport Express Station of the Beijing Capital International Airport Terminal 1, 2 and 3, and it will cost about RMB 20.00 Yuan (US$ 3.1) per person.

For Beijing Airport Express Services, please call: +86 10 64573891 / 64594376 / 64594375.

To take the Beijing Subway, please first take Beijing Subway Airport Line and transfer to Beijing Subway Line 10 at the San Yuan Qiao Station, and transfer to Line 8 at the Bei Tu Cheng Station and get off at Olympic Green Station and get out at Exit E, which is around 0.5 km (0.3 mile) away from CNCC and CNCC Grand hotel. For the people who need get to other hotel or locations, please transfer to other local public transportations. The operation time for Beijing Airport Subway Line is 6:21-22:51(T3), 6:35-23:10(T2), it will cost RMB 25.00 Yuan (US$ 4.1) per person. The operation time for Beijing Subway Line 10 and Line 8 is 4:50-00:20 and 5:30-23:00, which costs RMB 2.00 Yuan (US$ 0.33) per person.

For more information about Beijing Subway, please call: + 86 10 96165

ACCOMMODATION

CNCC Grand Hotel (four-star hotel, 8 min on foot to CNCC)Building 1, No. 8 Precincts, Beichen West Road, Chaoyang District, Beijing 100105Tel: 400 698 2008 / +86 10 84372008 Fax: +86 10 84370387Best Western OL Stadium Hotel (four-star hotel, 30 minutes on foot and 3 min by taxi to CNCC)No. 1 Datun Road, Beishatan, Beijing 100101Tel: +86 10 64874433 Fax: +86 10 64873545Yayuncun Hotel (three-star hotel, 10 min by taxi to CNCC)No. 8 Beichen East Road, Chaoyang District, BeijingTel: +86 10 649911997 Days Inn (express inn, 12 min by taxi to CNCC)No. 1 Beishatan, Deshengmen Wai, Chaoyang District, Beijing 100083Tel: +86 10 64870977

INSURANCEThe registration fees do not include insurance for the participants regarding accidents, sickness or loss of personal property. You are advised to make necessary arrangement for a short-term health and accident insurance before leaving your home country.

CURRENCY EXCHANGEIn China, only RMB is used. Exchange centers can be found at airports, hotels, banks and tourist shopping centers. The exchange rate is now about US$1.00=6.16Yuan. When changing money, you should keep your receipt in case you want to change any RMB back to foreign currency when leaving China. Credit cards (Visa, Master, American Express, Diners Club) are accepted in many department stores and hotels. It is possible to draw cash from ATM machine with credit cards.

The Bank of China and the most of the hotels can cash traveler’s check issued by most foreign banks or financial institutions. You need to show your passport and bare 4% commission charge.

REGISTRATION DESKThe registration desk will be set up in the open place on the 1st floor near the Delegates Access Gate C2 of CNCC at the following hours:

15th, Sept. (Mon) 08:00-20:00 16th, Sept. (Tue) 08:00-18:0017th, Sept. (Wed) 08:00-18:00 18th, Sept. (Thu) 08:00-18:00Participants are requested to go to the registration desk for registration and picking up the Congress kit.

SPEAKER READY ROOMA speaker ready room will be set up in the open place on the 3rd floor near the Business Center of CNCC, where participants could access the information for oral presentation schedule and relative moderator arrangement of the Congress. By using the computer in speaker ready room, participants who will give the oral lecture in each section could transfer their lecture slides to the terminal computer in their lecture room and rehearsal their slides in the Congress computer system.

PRESENTATION FACILITIESComputers and projectors will be available in all Congress halls and meeting rooms. The Congress Committee recommends that oral presentations are made using Microsoft PowerPoint.

SPECIAL REQUESTAll the participants should set their mobile phones at vibration mode during oral presentation sessions.

NAME BADGESAll delegates are required to wear their issued name badges at all time as the name badge is the identification to participate scientific sessions, the opening ceremony and reception.

TICKET FOR LUNCHLunch tickets, Chinese Cultural Night tickets are available at registration.

TEA AND COFFEE BREAKSTea and coffee breaks will be served outside the Congress halls and meeting room on the 3rd and 4th floor of CNCC.

MEDICAL SERVICESino-Japanese Friendship Hospital is located 5.8 km (3.6 miles) south of CNCC. Call the attendant of the hotel or call the staff of the Secretariat of 2014 World Congress of CIGR for assistance in case of medical needs. The telephone number of the City Emergency Center is 120.

POST OFFICEA nearby post office is located at No.4 East Road Kexueyuannanli. You may also leave your airmails at the Front Desks of the hotels where you put up and the hotel attendants will mail them out for you.

CHINESE CULTURAL NIGHT -CHINA ICEPOWERChinese Cultural Night will be held in the evening of 17th Sept., starting from 19:30, at Beijing Performance & Arts Centre (One block south away from CNCC), which is the big event to present the Chinese traditional culture and shows including Beijing Opera, Chinese traditional dancing, Performing Monkey Show, Chinese folk music, etc. Chinese Cultural Night is free for all the Congress participants and everyone is welcome to attend the event.

OPENING CEREMONY (With simultaneous translation)

Time: 09:30-10:00 Sept. 16th (Tuesday), 2014

Venue: Plenary Hall B, the 4th Floor of CNCC

Chair:

09:30–09:35

09:35–09:40

09:40–09:45

09:45–10:00

10:00–10:10

Prof. LI Shujun,

Chair announces the opening of the congress and introduces

the distinguished leaders and guests

Address by Prof. Da-Wen SUN, President of CIGR

Address by the leader from China Association for Science and

Technology

Address by a high-ranking official from the Chinese Government

Tea Break

Chair of the Organizing Committee of the 18th

World Congress of CIGR, President of Chinese

Academy of Agricultural Mechanization Sciences

(CAAMS)

PLENARY KEYNOTE SESSION(With simultaneous translation)

Time: 10:10-12:30 Sept. 16th (Tuesday), 2014 Venue: Plenary Hall B, the 4th Floor of CNCCChairs:

10:10–10:40

10:40–11:10

11:10–11:40

11:40–12:10

Prof. Da-Wen SUN, President of CIGRProf. ZHU Ming,

Agricultural Soil Mechanics and Management Prof. Richard John Godwin

Sustainable Animal Production Prof. Norman R. Scott

The Global Role of Agricultural Machinery Industry Dr. Hermann Garbers

Progress of Agricultural Machinery Industry and Agricultural Mechanization in ChinaProf. LI Shujun

President of Chinese Association of Agricultural Engineering (CSAE), Chinese Academy of Agricultural Engineering (CAAE)

Honorary Professor of the Czech University of Life Sciences, Visiting Professor of Harper Adams University, member of Royal Academy of Engineering

Prof. of Cornell University, member of National Academy of Engineering, USA

Chairman of VDMA (German Engineering Federation - Agricultural Machinery Division)

President of Chinese Academy of Agricultural Mechanization Sciences (CAAMS), President (2010-2013) of Asian Association for Agricultural Engineering (AAAE)

WELCOME RECEPTION(With interpretation)

Time: 19:00-21:00 Sept. 16th (Tuesday), 2014Venue: Plenary Hall A, the 4th Floor of CNCCChair:

19:00–19:05 19:05–19:10

19:10–19:15 19:15-19:20

CHINESE CULTURAL NIGHT - CHINA ICEPOWER

Time: 19:30-21:30 Sept. 17th (Wednesday), 2014 Venue: Beijing Performance & Arts Centre

For the purpose of presenting the authentic Chinese culture and enriching delegates’ limited days in Beijing, a glamorous cultural night is going to be held at 19:30, Sept.17th for all the delegates of the 18th World Congress of CIGR. Please join us for this special night for free!

The cultural night will be held in the Beijing Performance & Arts Centre, which is located to the south of the China National Convention Centre (CNCC), the Congress venue. After listening to the oral reports, delegates could have a nice 5-minute walk there to enjoy a memorable night.

There will be amazing shows and traditional Chinese art at this night. The 2-hour performance will give you a clear picture of the typical Chinese culture.

Chinese Cultural Night is sponsored by China Icepower Energy Technology Co., Ltd.

Prof. LI Shujun,

Welcome by the ChairAddress by Prof. LUO Xiwen, President of Chinese Society for Agricultural Machinery (CSAM) on behalf of CSAM and CSAEAddress by Mr. Terry Howell, Jr., the President of American Society of Agricultural and Biological Engineers (ASABE)Address by Prof. Peter Schulze Lammers, the past president of The European Society of Agricultural Engineers (EurAgEng)

Chair of the Organizing Committee of the 18th

World Congress of CIGR, President of Chinese Academy of Agricultural Mechanization Sciences (CAAMS)

CLOSING CEREMONY(With interpretation)

Time: 16:00-17:00 Sept. 18th (Thursday), 2014Venue: Room 309A+B, the 3rd Floor of CNCCChair:

16:00–16:05 16:05–16:20

16:20–16:30

16:30–16:40

16:40–16:5016:50–17:00

GALA DINNER(With interpretation)

Time: 19:00-21:00 Sept. 18th (Thursday), 2014 Venue: Plenary Hall A, the 4th Floor of CNCCChair:

19:00–19:05 Welcome by the Chair19:05–19:10 Address by the leader from China Agricultural University 19:10–19:25 Addresses by the representatives of the financial supporters

Prof. Tadeusz Juliszewski, Incoming President of CIGR (2015-2016)

Chair announces the start of Closing CeremonyReport on the 18th World Congress of CIGR by Prof. LI Shujun, Chair of the Organizing Committee of the 18th World Congress of CIGR, President of CAAMSSpeech by Prof. Can Ertekin, Co-Chair of the Organizing Committee of the 19th World Congress of CIGR, TurkeySpeech by Prof. Søren Pedersen, PPT by Dr. Morten Dam Rasmussen, Co-Chairs of the Organizing Committee of the International Conference 2016 in Aarhus, DenmarkAddress by Prof. Fedro Zazueta, Past President of CIGRClosing Ceremony ends

Prof. ZHU Ming, Chair of the Organizing Committee of the 18th

World Congress of CIGR, President of Chinese Academy of Agricultural Engineering (CAAE)

SPECIAL PROGRAM

Working Meetings of CIGR(September 15-17, 2014)

Meeting of CIGR Presidium Monday, September 15, 09:00-13:30HLocation: Room B210-211, No.31 Building, Chinese Academy of Agricultural Mechanization Sciences (CAAMS) (Second Floor)This is a closed meeting attended by CIGR presidium members only.

Meeting of CIGR Executive Board Monday, September 15, 14:00-17:00HLocation: Room A606, No.31 Building, Chinese Academy of Agricultural Mechanization Sciences (CAAMS) (Sixth Floor)This is a closed meeting attended by the members of CIGR Executive Board only.

Meeting of CIGR Working Group Tuesday, September 16, 10:00-11:30HLocation: Room 303A, China National Convention Center (CNCC) (Third Floor)

Meeting of CIGR Working Group Tuesday, September 16, 10:00-11:30HLocation: Room 303B, China National Convention Center (CNCC) (Third Floor)

Meeting of CIGR Working Group Tuesday, September 16, 10:00-11:30HLocation: Room 305, China National Convention Center (CNCC) (Third Floor)

Meeting of CIGR Working Group Tuesday, September 16, 10:00-11:30HLocation: Room VIP3-2, China National Convention Center (CNCC) (Third Floor)

Meeting of CIGR Section I Board Wednesday, September 17, 13:00-15:00HLocation: Room 409, China National Convention Center (CNCC) (Fourth Floor)This is a closed meeting attended by the members of CIGR Section I Board only.

Meeting of CIGR Section II Board Tuesday, September 16, 13:00-15:00HLocation: Room 406, China National Convention Center (CNCC) (Fourth Floor)This is a closed meeting attended by the members of CIGR Section II Board only.

Meeting of CIGR Section III Board Tuesday, September 16, 13:00-15:00HLocation: Room 407, China National Convention Center (CNCC) (Fourth Floor)This is a closed meeting attended by the members of CIGR Section III Board only.

Meeting of CIGR Section IV Board Tuesday, September 16, 13:00-15:00HLocation: Room 305, China National Convention Center (CNCC) (Third Floor)This is a closed meeting attended by the members of CIGR Section IV Board only.

Meeting of CIGR Section V Board Tuesday, September 16, 13:00-15:00HLocation: Room 303A, China National Convention Center (CNCC) (Third Floor)This is a closed meeting attended by the members of CIGR Section V Board only.

Meeting of CIGR Section VI Board Tuesday, September 16, 13:00-15:00HLocation: Room 303B, China National Convention Center (CNCC) (Third Floor)This is a closed meeting attended by the members of CIGR Section VI Board only.

Meeting of CIGR Section VII Board Tuesday, September 16, 13:00-15:00HLocation: Room VIP3-2, China National Convention Center (CNCC) (Third Floor)This is a closed meeting attended by the members of CIGR Section VII Board only.

Meeting of CIGR Journal Tuesday, September 16, 15:00-17:00HLocation: Room 303B, China National Convention Center (CNCC) (Third Floor)This is an open meeting for all participants.

Meeting of CIGR Technical Board Tuesday, September 16, 17:00-20:00HLocation: Room 303B, China National Convention Center (CNCC) (Third Floor)This is a closed meeting attended by the members of CIGR Technical Board only.

CIGR Awards CeremonyWednesday, September 17, 16:30-17:20HLocation: Room 309A, China National Convention Center (CNCC) (Third Floor)

Meeting of CIGR General AssemblyWednesday, September 17, 17:30-19:00HLocation: Room 309A, China National Convention Center (CNCC) (Third Floor)This is a closed meeting attended by CIGR members only.

OVERVIEW OF CIGR WORKING MEETINGS AT THE 18th WORLD CONGRESS OF CIGR

Date Time Meeting

15-Sept.

09:00-13:30CIGR Presidium meetingLocation: Room B210-211, No. 31 Building, CAAMS

14:00-17:00Executive Board meetingLocation: Room A606, No. 31 Building, CAAMS

16-Sept.

10:00-11:30

Working Group meeting Location: Room 303A, CNCC

Working Group meeting Location: Room 303B, CNCC

Working Group meeting Location:Room 305, CNCC

Working Group meeting Location: Room VIP3-2, CNCC

13:00-15:00

Section Board II meeting Location: Room 406, CNCC

Section Board III meetingLocation: Room 407, CNCC

Section Board IV meeting Location: Room 305, CNCC

Section Board V meeting Location: Room 303A, CNCC

Section Board VI meeting Location: Room 303B, CNCC

Section Board VII meeting Location: Room VIP3-2, CNCC

15:00-17:00 Journal MeetingLocation: Room 303B, CNCC

17:00-20:00 Technical Board meetingLocation: Room 303B, CNCC

17-Sept.

13:00-15:00 Section Board I meeting Location: Room 409, CNCC

16:30-17:20 CIGR Awards Ceremony Location: Room 309A, CNCC

17:30-19:00 CIGR General Assembly Location: Room 309A, CNCC

SESSIONS OF CONGRESS

SESSION I LAND AND WATER ENGINEERINGSPECIAL SESSION: CHINA-US WATER-SAVING TECHNOLOGY FLAGSHIP PROJECT WORKSHOP

SESSION II FARM BUILDINGS, EQUIPMENT, STRUCTURES AND ENVIRONMENT

SESSION III EQUIPMENT ENGINEERING FOR PLANTS

SESSION IV ENERGY IN AGRICULTURE

SESSION V DEVELOPMENT STRATEGY, ERGONOMICS AND SYSTEM MANAGEMENT

SESSION VI POSTHARVEST TECHNOLOGY AND PROCESS ENGINEERINGSPECIAL SESSION: RESEARCH AND DEVELOPMENT OF PLANT RESOURCES

SESSION VII INFORMATION SYSTEMS

SESSION VIII AGRICULTURAL MACHINERY STANDARDIZATION

SESSION IX ASIA FORUM

SESSION I

LAND AND WATER ENGINEERING

tratio

1st fl

tratio

1st fl

SESSION I

LAND AND WATER ENGINEERING

18TH WORLD CONGRESS OF CIGR

ORAL PRESENTATIONS

SEPTEMBER 16, 2014

TUESDAY AFTERNOON

13:30-17:00

Location: Room 306 A-B, the 3rd Floor of CNCCChairs: Prof. Luis SantosPereira, University of Lisbon, Portugal Prof. Shaozhong Kang, China Agricultural University, China

15:00-15:15 Tea Break

Location: Room 306 A-B, the 3rd Floor of CNCCChairs: Dr. Gerrit J. Carsjens, Wageningen University, The Netherland Prof. Guanhua Huang, China Agricultural University, China

Time Paper # Technical Presentations

13:30-14:00 0826-118

Improving agricultural water use efficiency by understanding physiological mechanismShaozhong KangChina Agricultural University, China

14:00-14:30 0826-119

Evapotranspiration, irrigation requirements and modelling: issues for agricultural water management Luis S. Pereira University of Lisbon, Portugal

14:30-14:45 2014-0437Food in space: the spatial organization of food systemsGerrit J. CarsjensWageningenUniversity, The Netherland

14:45-15:00 2014-1331

Parameterization and calibration of the Aquacrop model for assessing soybean biomass and yield application in the north China plainYu Liu, Xin YanInstitute of Water Resources and Hydropower Research, China

SEPTEMBER 17, 2014

WEDNESDAY MORNING

08:30-12:00

Location: Room 303 A-B, the 3rd Floor of CNCCChairs: Prof. Tammo Steenhuis, Cornell University, USA Prof. Yaohu Kang,

15:15-15:30 2014-1027

Assessing irrigation water management using trend analysis and autocorrelationAmadou KeitaInternational Institute for Water and Environmental Engineering (2iE), Burkina Faso

15:30-15:45 2014-1356

Hydro-tech: an automated smart-tech decision support tool for eco-efficient irrigation managementMladenTodorovic, Vito Cantore, Erminio E. Riezzo, Vito Buono, Mario Zippitelli, Angelo Galiano, CIHEAM - Mediterranean Agronomic Institute of Bari, Italy

15:45-16:00 0826-120

Deficit irrigation for improving fruit quality and food security in arid Northwest ChinaTaisheng DuChina Agricultural University, China

16:00-16:15 0826-121

Assessment of irrigation efficiency based on remotely sensed evapotranspiration in an arid irrigation districtSonghao Shang, Yuting Yang, Lei JiangTsinghua University, China

16:15-16:30 0826-122

Physiological parameters variations in olive tree (oleaeuropaea l., cv. arbequina) under different irrigation regimes in uruguayClaudio GarcíaInstitutoNacional de InvestigaciónAgropecuaria (INIA), Uruguay

16:30-16:45 0826-123

Assessing “developing a water-saving society” policy for the Heihe river basin in China: a structural decomposition analysis approachJunguo Liu, Xu Zhao, Qingying Liu, Guodong Cheng, Honglang XiaoBeijing Forestry University, China

16:45-17:00 0507-003Determination of young olive-tree water consumption with drainage lysimetersGarcía Petillo MarioUniversidad de la República, Uruguay

Institute of Geographic Sciences and Natural Resources Research, Chinese Academy of Sciences, China

08:30-09:00 0826-124

Is increasing irrigation efficiency a panacea for sustainable water resources managementTammo SteenhuisCornell University, USA

09:00-09:15 0618-110

Soil water-salt management methods, agricultural utilization and vegetation construction theories under drip irrigation in saline-sodic soilsYaohu Kang, ShuqinWan,Yanping Jiao, Junli Tan, Shuhui Liu, Ruoshui Wang, Jiaxia Sun, Tibin Zhang, Xiulong Chen, Xiaobin Li, Shufang Jiang, Wu Hu, Zheqiang Sun, Zhu Xue, Shiping LiuInstitute of Geographic Sciences and Natural Resources Research, Chinese Academy of Sciences, China

09:15-09:30 0618-117

Three models for applications of drip irrigation in Hetao irrigation areas of Inner MongoliaJian Yu, Jinzhong Yang, Kezheng Guo, Zhongyi Qu, Jigang ShiWater Resources Research Institute of Inner Mongolia, China

09:30-09:45 2014-0219Field assessment of basin irrigation performance in Hetao, Inner MongoliaJosé Manuel Gonçalves, Qingfeng Miao, Haibin Shi, Luis S. PereiraUniversity of Lisbon, Portugal

09:45-10:00 0826-125

Minimizing non-productive water use through partitioning soil evaporation from evapotranspiration in north china plainDaozhi GongChineseAcademy of Agricultural Sciences, China

10:15:10:45 0826-126

Modeling of vadose zone processes and applications to agricultural productivity and environmental sustainabilityJirka ŠimunekUniversity of California – Riverside, USA

10:45-11:00 2014-0388Stemflow of maize and its influencing factorsHaijun Liu, Liwei ZhangBeijing Normal University, China

11:00-11:15 0826-134

Water requirement with irrigation expansion in Jingtai irrigation district, Northwest China: the need to consider irrigation-induced local changes in evapotranspiration demandSongjun Han, Di Xu, Shaoli Wang, Zhiyong YangInstitute of Water Resources and Hydropower Research, China

10:00-10:15 Tea Break

Location: Room 303 A-B, the 3rd Floor of CNCCChairs: Prof. Jirka Šimunek, University of California – Riverside, USA Dr. Xiaomin Mao, China Agricultural University, China

13:30-14:00 0826-128Source zone remediation of chlorinated solvents in groundwater Andrew D. Barry Ecole polytechnique fédérale de Lausanne (EPFL), Switzerland

14:00-14:15 2014-0257

Wastewater reuse in irrigation - treatment for antibiotic removalIsabel Maria Nunes da Rosa Dias Duarte, Maria Paula Pinto Amador, Ruben Miguel Pereira Fernandes, Maria Luísa Lopes de Castro e Brito, MárioAntónio Vale e Pina Barreto, Maria Cristina Prudêncio Pereira SoareEscola Superior Agrária de Coimbra, Portugal

14:15-14:30 0826-129

Research progress on safe and high quality food production using reclaimed water irrigation technologies Xuebin Qi, Zongdong Huang, Ping Li, Dongmei Qiao, Wei GuoFarmland Irrigation Research Institute, Chinese Academy of Agricultural Science and the Ministry of Water Resources, China

14:30-14:45 2014-0258

Wastewater reuse in irrigation - antibiotic resistance risk Maria Paula Pinto Amador, Isabel Maria Nunes da Rosa Dias Duarte, Ruben Miguel Pereira Fernandes, Maria Luísa Lopes de Castro e Brito, MárioAntónio Vale e Pina Barreto, Maria Cristina Prudêncio Pereira SoaresEscola Superior Agrária de Coimbra, Portugal

11:15-11:30 2014-0971

Evaluation of water use efficiency in irrigated agriculture supported by satellite imagesEnrique PalaciosColegio de Postgraduados, Mexico

11:30-11:45 2014-0626

Spatial variability of seasonal ETo computed with full and reduced datasets in Inner Mongolia, China: an assessment of temperature methodsZhongyi Qu, Xiaodong Ren, D. S. Martins, Luis S. PereiraInner Mongolia Agricultural University, China

SEPTEMBER 17, 2014

WEDNESDAY AFTERNOON

13:30-17:00

Location: Room 303 A-B, the 3rd Floor of CNCCChairs: Prof. Andrew D. Barry, Ecole Polytechnique Fédérale de Lausanne (EPFL), Switzerland Prof. Xuebin Qi, Farmland Irrigation Research Institute, Chinese Academy of

Agricultural Science and the Ministry of Water Resources, China

14:45-15:00 2014-1219

Transportation and transformation of nitrate during surface- spreading aquifer recharge system: a laboratory soil columns experimentWeiyan Pan, Quanzhong Huang, Guanhua Huang, Xu Xu, Ziyuan Zhang, Bingqian LiuChina Agricultural University, China

15:00-15:15 Tea Break

Location: Room 303 A-B, the 3rd Floor of CNCCChairs: Prof. Thomas J. Trout, USDA- Agricultural Research Service, USA Prof. Qiang Fu, Northeast Agricultural University, China

15:15-15:45 2014-1298

Technologies to manage limited irrigation water supplies and sustain irrigated agricultureThomas J. TroutUSDA- Agricultural Research Service, USA

15:45-16:00 0618-116

Evaluating the usefulness of ligand addition on phytoextraction of Cd-polluted soil using a mechanistic modelZhongbing Lin, André Schneider, Christophe Nguyen, Thibault SterckemanWuhan University, China

16:00-16:15 0618-105

Reclaimed municipal wastewater irrigation reduced the amount of nitrogen fertilizer and primed rhizosphere soil nitrogen supplying capacityPing Li, Xuebin Qi, Chao Hu, Zhijuan Zhao, Xiangyang Fan, Jianjun Chen,Farmland Irrigation Research Institute, Chinese Academy of Agricultural Science and the Ministry of Water Resources, China

16:15-16:30 2014-1034

Effects of irrigation with domestic treated wastewater on the some soil chemical propertiesMehmet Gündüz, Nil Korkmaz, Serafettin ASIKInternational Agricultural Research and Training Center, Mexcio

16:30-16:45 0618-106

Distribution behavior and leachability of polycyclic aromatic hydrocarbons (Pahs) in Hunpu wastewater irrigation area, ChinaSong Cui, Qiang Fu Northeast Agricultural University, China

16:45-17:00 0826-130

Effect of drip irrigation schemes and water quality of sewage effluent on soil chemical properties and tomato yieldYanfeng LiInstitute of Water Resources and Hydropower Research, China

08:30-08:45 2014-0764

A simple model for determining salt leaching cycle in subhumid regions under controlled drainageWan Luo, Shan LiXi’An University of Technology, China

08:45-09:00 0509-020

A ten-year field experimental study on the effectiveness of dry drainage in soil salinity controlJingwei Wu, MousongWuWuhan University, China

09:00-09:15 0514-015

Drainage and salinity problems in the Mexican irrigation districts: an overview 1962-2013Óscar Luis Palacios-VélezCampus Montecillo del Colegio de Postgraduados en Ciencias Agrícolas, Mexico

09:15-09:30 0826-131

Nitrogen and phosphorus loss and optimal drainage time of paddy field under controlled drainage conditionMenghua XiaoJiangsu University, China

09:30-09:45 0826-132

Influences of additional N fertilizer after heavy rains on growing and yield of maize in North China plainYanqun Zhang, Jiandong Wang, Shihong Gong, Juan Sui, Jingping YangInstitute of Water Resources and Hydropower Research, China

09:45-10:00 2014-1460

Numerical simulation of nitrate nitrogen migration in an agricultural activity area with water table fluctuationShifeng LiChina Agricultural University, China

SEPTEMBER 18, 2014

THURSDAY MORNING

08:30-12:00

Location: Room 303 A, the 3rd Floor of CNCCChairs: Dr. Mladen Todorovic, CIHEAM - Mediterranean Agronomic Institute of Bari, Italy Prof. Wan Luo, Xi’An University of Technology, China

10:00-10:15 Tea Break

Location: Room 303 A, the 3rd Floor of CNCCChairs: Prof. Yoshiyuki Shinogi, Kyushu University, Japan Prof. Jingwei Wu, Wuhan University, China

Location: Room 303B, the 3rd Floor of CNCCChairs: Prof. Shamaila Zia, Universität Hohenheim, Germany Prof. Taisheng Du, China Agricultural University, China

10:15-10:30 2014-1560

Hyperspectral analysis on traces of chlorpyrifos in paddy fields discharged waterYali Zhang, Xiwen Luo, Long Ma, Ruijun Ma, Haijian ZhanSouth China Agricultural University, China

10:30-10:45 0826-133Modelling soil water flow and solute transport through layered soilXiaomin MaoChina Agricultural University, China

10:45-11:00 2014-0660Rice-husk biochar potential to affect rice growth and soil moistureEndita Prima Ari Pratiwi, Yoshiyuki ShinogiKyushu University, Japan

11:00-11:15 2014-0794Contribution of groundwater to crop water use in deficit irrigation fieldZailin Huo, Xiaoyu GaoChina Agricultural University, China

11:15-11:30 2014-1234

The effect of n fertilization on yields and nitrogen efficiencies in a four-year wheat/maize cropping practiceYan Li, Guanhua HuangChina Agricultural University, China

11:30-11:45 2014-1386

Field calibration of a cosmic-ray neutron probe for hectar-scale soil moisture detectionShamaila Zia, Francisco Miguel Aguila Marin, Yang Pengnian, Wolfram Spreer, Joachim MüllerUniversität Hohenheim,Germany

11:45-12:00 2014-1552

Water and salt dynamics during autumn irrigation and freeze/thaw periods calculated by flux balance method and SHAW modelXiao Tan, Mousong Wu, Jiesheng Huang, Jingwei Wu, Jingjing LiuWuhan University, China

10:00-10:15 Tea Break

Location: Room 303B, the 3rd Floor of CNCCChairs: Prof. José Manuel Gonçalves, Instituto Politécnico de Coimbra, Portugal Prof. Junguo Liu, Beijing Forestry University, China

10:15-10:30 2014-0217

Modernizing surface irrigation and land levelling in Hetao with application of the DSS SADREGJosé Manuel GonçalvesUniversity of Lisbon, Portugal

10:30-10:45 0826-135Field evaluation of water distribution for variable rate irrigation systemJiusheng Li, Weixia ZhaoInstitute of Water Resources and Hydropower Research, China

08:30-08:45 2014-1535

Cost-benefit analysis of using sprinkler and drip irrigation systems for tomato production under soilless farming and greenhouse conditionAlagha Samuel Adelanke, Jinadu OlugbengaRufus Giwa Polytechnic, Nigeria

08:45-09:00 2014-0295Response of potato to drip and gun irrigation systemsZhenjiang Zhou, Mathias Neumann Andersen, Finn Plauborg, OveEdlefsenAarhus University, Denmark

09:00-09:15 2014-1235

Effects of regulated deficit irrigation on the yield, quality and water productivity of tomato in an arid region of Northwest ChinaJianhua Zheng, Guanhua HuangChina Agricultural University, China

09:15-09:30 2014-1126Study on adaptive capacity of agricultural technology to climate changeZhifenZhai, Jianhua ZhangChinese Academy of Agricultural Engineering, China

09:30-09:45 2014-0374

Evaluating WEPP predictions of runoff and soil losses on a hillslope in the loess plateau region of ChinaShuangcheng Tang, Wan LuoXi’An University of Technology, China

09:45-10:00 0826-136

Improving soil moisture and evapotranspiration estimation by data assimilation and remote sensing data over irrigated cropland in the Northern China plainHe ChenInstitute of Water Resources and Hydropower Research, China

10:45-11:00 2014-1233

Variation of leaf water potential in orychophragmus violaceus based on regulation of carbonic anhydrase under osmotic stressDeke Xing, Yanyou WuInstitute of Geochemistry Academy of Sciences, China

11:00-11:15 2014-0744

Research on the key way to achieve best match of irrigation and arable land in ChinaBangbang ZhangChina Agricultural University, China

11:15-11:30 0507-002

Management width border-check irrigation to enhance water application on a field pastureClaudio GarcíaInstituto Nacional de Investigación Agropecuaria (INIA),Uruguay

11:30-11:45 2014-0628

Assessment of daily ETo estimation with the hargreaves-samani and the penman-monteith temperature methods in Inner Mongolia, ChinaXiaodong Ren, D. S. Martins, Zhongyi Qu, Luis S. PereiraInner Mongolia Agricultural University, China

11:45-12:00 0826-137Modeling canopy resistance from climatic variables for predictingHaofang Yan, Haibin Shi, Oue Hiroki, Chuan ZhangJiangsu University, China

SEPTEMBER 18, 2014

THURSDAY AFTERNOON

13:30-15:00

Location: Room 303 A, the 3rd Floor of CNCCChairs: Prof. Luis Pimentel-Bribiesca, Universidad Autónoma Chapingo, Mexico Dr. Songhao Shang, Tsinghua University, China

13:30-13:45 2014-1528Watershed correction for a better water harvestingLuis Pimentel-BribiescaUniversidad Autónoma Chapingo, Mexico

13:45-14:00 0618-107

The research on health evaluation index system of water-based system in watershedZhenxiang Xing, Jing Li, Qiang Fu, Hao Guo, Yi JiNortheast Agricultural University, China

14:00-14:15 2014-0917

Effect of climate change on hydrological conditions in rapid urbanization regions: a case study in the Taihu basin, ChinaLiu Liu, Zongxue XuChina Agricultural University, China

14:15-14:30 0618-055

Simulation of streamflow components using soil water assessment tool (SWAT) modelTingmin Yu, Marenya MosesARC, South Africa

14:30-14:45 2014-1104

Crop planting structure uncertainty and multi-objective programming modelsMo Li, Ping Guo, Liudong ZhangChina Agricultural University, China

14:45-15:00 2014-1306

Study on the application of lightweight aggregate concrete in lining channels of Hetao irrigation districtXiangdong Shen, Chu GaoInner Mongolia Agricultural University, China

15:00-15:15 Tea Break

Location: Room 303B, the 3rd Floor of CNCCChairs: Prof. Claudio García, Instituto Nacional de Investigación Agropecuaria (INIA), Uruguay Prof. Zhongyi Qu, Inner Mongolia Agricultural University, China

13:30-13:45 2014-0737

Sprinkler package modification for a center pivot irrigation system in an alfalfa fieldYongchong Li, Haijun Yan, Maona Li, Chengbo Xu, Zhiqiang WangChina Agricultural University, China

13:45-14:00 2014-0161

The role of dew as a moisture source for sand in a typical semiarid sand-meadow area of Horqin sandy landTianshuai Wang, Tingxi Liu, Limin Duan, YaoWuInner Mongolia Agricultural University, China

14:00-14:15 0618-060

Research on transformation laws and calibration method of soil water in tomato roots soil layerJun ZhangInstitute of Soil and Water Conservation, Chinese Academy of Sciences & Ministry of Water Resources, China

14:15-14:30 2014-0924

Grassland steppe evapotranspiration and groundwater contribution in Horqin, Inner MongoliaYao Wu, Tingxi LiuInner Mongolia Agricultural University, China

14:30-14:45 0618-014

Behaviors of elemental sulfur and pyrite as electron donors for denitrification in nitrate-contaminated groundwater remediationJiaoyang PuChina University of Geosciences, China

14:45-15:00 2014-1463

Emitter clogging sensibility with increasing biofilm components under reclaimed water drip irrigationBo Zhou, Yunkai Li, Peng Song, Ji Feng, Yinguang JiangChina Agricultural University, China

08:30-08:50 0826-101

Enhancing water use efficiency with plant feedback irrigation control: the case for sorghumDr. Steven R. EvettUSDA-ARS, USA

08:50-09:10 0826-114Indexes of irrigation schedule decision-making and precision controlDr. CaiJiabinChina Institute of Water Resources and Hydropower Research

09:10-09:30 0826-103Potential water conservation using site-specific irrigationDr. Kenneth C. StoneUSDA-ARS

09:30-09:50 0826-116Real time control technology for precision surface irrigation Dr. Bai MeijianChina Institute of Water Resources and Hydropower Research

09:50-10:10 0826-104Soil moisture monitoring using wireless sensor networkDr. Ruixiu SuiUSDA-ARS, USA

SPECIAL SESSION

CHINA-US WATER-SAVING TECHNOLOGY FLAGSHIP

PROJECT WORKSHOP

18TH WORLD CONGRESS of CIGR

ORAL PRESENTATIONS

SEPTEMBER 17, 2014

WEDNSDAY MORNING

08:30-12:00

Location: Room 305, the 3rd Floor of CNCCChair: Dr. Jiming Jin, Northwest A&F University

10:10-10:20 Tea Break

10:20-10:40 0826-113Prediction of crop water requirement based on remote sensingDr. Zhang ZhitaoNorthwest A&F University

10:40-11:00 0826-115

Cloud Intelligent Cotton Drip Irrigation Management and Benefit Analysis – A Case Study on AksuDr. Yu YinduoChina Institute of Water Resources and Hydropower Research

11:00-11:20 2014-1240Advancing irrigation efficiencyin the arid southwest USADr. Kevin F. BronsonUSDA-ARS

11:20-11:40 0826-107Micro irrigation Development in ChinaDr. Li GuangyongChina Agricultural University

11:40-12:00 0826-105

ARS water productivity research in the U.S. Central Plains: Measuringcrop response to water stressDr. Thomas J. TroutUSDA-ARS

SEPTEMBER 17, 2014

WEDNESDAY AFTERNOON

14:00-17:00

Location: Room 305, the 3rd Floor of CNCCChair: Dr. Ruixiu Sui, USDA-ARS

14:00-14:20 0826-117R&D of irrigation equipment in Jiangsu UniversityDr. Li HongJiangsu University

14:20-14:40 0826-109Development and application of center pivot irrigation system in ChinaDr. Yan HaijunChina Agricultural University

14:40-15:00 0826-111Assessing whole-field sprinkler irrigation application uniformityDr. Zhang LinNorthwest A&F University

15:20-15:40 0826-106Impact of Soil Variability on Irrigated Cotton Yield Dr. Earl D. VoriesUSDA-ARS

15:40-16:00 0826-102

Water Management Impacts on Measured Turbulent Fluxes of Heat, Water Carbon and Methane of Mid-South US RiceDr. Michele L. RebaUSDA-ARS

16:00-16:20 0826-112

Monitoring and modeling of crop habitat process under different mulching modes: challenge and opportunity Dr. Zhao YingNorthwest A&F University

16:20-16:40 0826-108

Drip Irrigation Scheduling for Potato in North China Plain and Northwest China. Dr. Wang FengxinChina Agricultural University

16:40-17:00 0826-110

Numerical simulations of the impact of irrigation on arid climate over northwestern ChinaDr. JimingJinNorthwest A&F University

SEPTEMBER 18, 2014

THURSDAY MORNING

08:30-12:00

Location: Room 305, the 3rd Floor of CNCCChairs: Dr. Ruixiu Sui, USDA-ARS, USA Dr. Wenting Han, Northwest A&F University, China08:30-12:00 Discussion on Flagship Project

15:00-15:20 Tea Break

SESSION I

POSTER SESSIONS

SEPTEMBER 16, TUESDAY

13:30 - 17:00

Topic (1) Drought Management

No. Poster # Paper # Paper Titles Institution Country

1 11-001 0526-026 Research of Reference Crop Evapotranspiration

Kang YinhongSichuan Agricultural

UniversityChina

2 11-002 2014-0624

Impacts of Climate and Landuse/cover Change on Streamflow

Using SWAT combined Separating Method for Xiying River Basin in

Northwestern China

Guo JingNorthwest

Agriculture & Forestry University

3 12-001 0618-039

Structure of Mechanized Cultivation Technology of Seedling-growing

Bowl Tray Made of Paddy-straw and Its Effects on Rice Yield

Li LianhaoChina Agricultural

UniversityChina

4 12-002 2014-0159Analyzing Climate Change Impacts

on Rainfed Maize Water Productivity in The Murray Darling Basin, Australia

Kang YinhongSichuan Agricultural

UniversityChina

5 12-003 2014-0280

Performance Evaluation of AquaCrop Model for Plastic Film Mulching on

Rain-fed Maize in The Semi-arid Region of China Northeast

Yang NingLiaoning provincial

academy of agricultural sciences

6 12-004 2014-0346Effects of Different Subsoiling

Tillage on Water use Efficiency and Grain Yield of Maize

Liu Zhandong,Chinese Academy of Agricultural Sciences

7 12-005 2014-0556

Effects of Different Nitrogen Rates, Irrigation Volumes, and Application

of Humic Acid on The Yield and Nitrate Leaching in Eggplant Fields:

A Lysimeter Study

Dong YiweiChinese Academy

of Agricultural Sciences

8 12-006 2014-0674Study on Water Consumption

and Forecast Model of Fraxinus Chinensis

Li PingfengBeijing agricultural

information technology research

center

Topic (2) Water-saving Vs. Farmer Revenues

13 13-001 0618-027Sensitivity Analysis of

Reservoir Irrigation Benefit in the Context of Climate Change

Ma FangkaiDepartment of Planning, Changjiang Institute of

Survey, Planning, Design and Research,

14 13-002 0618-100

Design and Experiment of Automatic Decision System

for Nutrient Solution Irrigation in Substrate Culture Based on

Negative Pressure

Zhang FangXi an University of

TechnologyChina

15 13-003 2014-0091

Irrigation Scheduling of Cotton with Drip Irrigation under Film Mulching Based

on Pan Evaporation

Shen XiaojunKey Laboratory of Crop

Water Use and Regulation, Ministry of Agriculture,

Farmland Irrigation Research Institute, Chinese Academy

of Agricultural Sciences

16 13-004 2014-0500

Layout Pattern and Planning on Integrated Irrigation and Drainage System in Huang-

Huai-Hai Plain Region

Shi XueshuangChina Agricultural University China

17 13-005 2014-0908

Integrated Technologies for Improvement of Irrigation

Systems in Mountainous and Hilly Areas

Chen JianCollege of Engineering

and Technology, Southwest University

18 13-006 2014-0922

Abrasion wear resistance of co2 gas shielded spraying

powder composite surfacing subsoiling plow shovel

Jiao RenbaoSchool of Mechanical Engineering, JiaMusi

University

Topic (3) Modernization of Irrigation Systems

10 12-008 '2014-0938

Estimation of pipe losses in drip irrigation system and its control

measurements through redesigning in Pakistan

Qaiser JavedInstitute of

Agricultural Engineering, Jiangsu

University

11 12-009 2014-1317Assessing and optimizing field

irrigation performance for seed corn field in the middle Heihe River basin

Jiang Yao Center for Agricultural

Water Research, China Agricultural

University

12 12-010 2014-1410

Assessing the impacts of groundwater table changes on soil

salinity and maize yield under groundwater irrigation in the upper

Yellow river basin, China

Hao YuanyuanChinese-Israeli

International Center for Research and Training

in Agriculture, China Agricultural

University

19 13-007 2014-1163

Cistern Siting Based on GIS and Estimation of Crop Irrigation Requirement in a Hilly Watershed in China

Liu WeipingKey Laboratory of Eco-

environments in Three Gorges Cistern Region, Ministry of Education, College of

Resources and Environment, Southwest University

20 13-008 2014-1245 Irrigation System Based on the Principle of Penetration

Zhan linhaiCollege of Engineer,China

Agricultural UniversityChina

21 13-009 2014-1335Research on Fine Roots

Distribution of Apple Trees in Water Storage Pit Irrigation

Guo XianghongCollege of water resource

science and engineering, Taiyuan University of Technology

22 13-010 2014-1343

Applicability of different infiltration models to

infiltration characteristics of soil water under negative

hydraulic head

Shang GuanyuyiGraduate School of Chinese

Academy of Agricultural Science

23 13-011 2014-1364

Experiment Investigation and Numerical Simulation of Head-discharge Relationship for Arch Sharp-crested Weir

Ma QinbiaoCollege of Water

Conservancy and Civil Engineer, China Agricultural

University

24 13-012 2014-1373

Distributed simulation of soil water dynamics and crop water productivity in Hetao

Irrigation District

Yin RuixueCenter for Agricultural Water Research, China Agricultural

University

25 13-013 2014-1439

The Effects of Ice Cover on Water and Salts Movement in Unsaturated Frozen Soil : Experiments and Simulation

Tan XiaoState Key Laboratory

of Water Resources and Hydropower Engineering

Science, Wuhan University

26 14-001 0618-022

Adsorption of ammonia nitrogen onto ceramic

composite materials based on lake sediment from aqueous

solution

Yu YangSchool of Water Resources

and Environment, China University of Geosciences

27 14-002 2014-0511

Effects of Saline Water Drip Irrigation on The Soil Water Distribution and Processing

Tomato Growth in Hetao Irrigation District

Liu YuCollege of Water Resources

and Civil Engineering, China Agricultural University

Topic (4) Salinity Assessment and Control

28 14-003 2014-0512

Biomass Production and Nutrients Removal by

Spirulina Platensis FACHB - 439 in Beer Wastewater

Wu XiaodanEngineering Research Center

of Biomass Conversion, Ministry of Education, Nanchang University

29 14-004 2014-0554

Comparing Performance of ADE and MIM Based

Models for Simulating Solute Transport in Heterogeneous

Mao XiaominCollege of Water Resources

and Civil Engineering, Center for Agricultural Water

Research in China, China Agricultural University

30 14-005 2014-0627

Evaluation of Regulated Deficit Irrigation Performance

of Saline Water Based on Principal Component Analyses

He XinChina Agricultural University China

31 14-006 2014-0629

The Impact of Reclaimed Water Drip Irrigation in

Summer Maize with Different Nitrogen Fertilizer Application

on CO2 and N2O Emissions

Gao DaweiChina Agricultural University China

32 14-007 2014-0812

Research on the hydrochemistry characteristics and evolution of groundwater in the upper, middle and lower

reaches of Inner Mongolia Hetao irrigation district

Li BinThe College of Water

Conservancy and Civil Engineering,Inner Mongolia

Agriculture University

33 14-008 2014-0887

Comparative study of canal water and filtered chlorinated

canal water to evaluate the efficiency of water treatment

system in Millat town Faisalabad, Pakistan

Ahmad AzeemInstitute of Agricultural

Engineering, Jiangsu University

34 14-009 2014-1299Comparison of Heavy Metal

Pollution Loads from Different Land Uses in Binzhou

Liu GangCollege of Information and

Electrical Engineering, China Agricultural University

35 14-010 2014-1581The Effect Of Salinity On Soil Evaporation: Experiments and

Simulation

Zhang ShaowenState Key Laboratory

of Water Resources and Hydropower Engineering

Science, Wuhan University

36 15-001 2014-0139 Effects of Sub-soiling on Corn Yield and Soil Physical Quality

Li XiaShihezi University China

37 15-002 2014-0364 Fractal Behavior of Tillage Soil Surface Roughness

Hou ZhanfengInner Mongolia Agricultural

UniversityChina

Topic (5) Irrigation and Soil Monitoring: Practices and Equipment

41 16-001 2014-0745Effects of the Bionic Ring

Structure on Drill Pipe Surface Anti-corrosion

Wang hubiaoKey Laboratory of Bionic Engineering (Ministry of

Education),Jilin University

42 16-002 2014-0981

Comparing Mathematic Models for Chemical Transfer from Soil to Surface Runoff

with Rainfall Impact

Yang TingInstitute of Water Resources

and Hydro-electric Engineering, Xi’an University

of Technology

43 16-003 2014-0999Research of Calculation

Methods of Fractal Dimension on Soft Terrain Surface

Jiang ChunxiaCollege of Engineering,

Nanjing Agricultural University

No. Poster # Paper # Paper Title Institution Country

44 17-001 2014-1637

Variation of Vegetation NDVI and its Responses to Climate

Change in the Contiguous Region of Shanxi, Shaanxi and Inner Mongolia During Recent

15 Years

Ning TingtingState Key Laboratory of

Soil Erosion and Dryland Farming on the Loess

Plateau, Institute of Soil and Water Conservation, Chinese

Academy of Sciences and Ministry of Water Resources

Topic (6) Soil Conservation and Improvement

Topic (7) Landscape Protection and Preservation

38 15-003 2014-0411

Study on the Ecological Planning of Basic Farmland Protect in Tropical Platform

Area: A Case Study in Tunchang County, Hainan

Province

Tang XiumeiBeijing Academy of

Agriculture and Forestry Sciences

39 15-004 2014-0596

Anisotropy of Soil Gas Transport Properties of

Disturbed and Compacted Japanese Andisol as Affected

by Water Content and Level of Compaction

Purwoko Hari KuncoroDepartment of Agricultural and

Environmental Engineering, The United Graduate School

of Agricultural Sciences, Iwate University, Morioka,

Indonesia

40 15-005 2014-0743Experimental Study on

Infiltrability of Layered Soil with Point Source Infiltrometer

Hu YaqiCollege of Water Resources & Civil Engineering, China

Agricultural University

SESSION II

FARM BUILDINGS, EQUIPMENT, STRUCTURES AND ENVIRONMENT

Monday, Sept. 15 08:00-20:00Registration

Location:the open place on the 1st floor near the Delegates AccessGate C2, CNCC

Tuesday, Sept. 16

09:30-10:00 Opening Ceremony Location:Plenary Hall B, CNCC

10:00-10:10 Tea Break

10:10-12:30 Congress Plenary with Invited Speakers Location:Plenary Hall B, CNCC

12:30-13:30 Lunch Location:Plenary Hall A, CNCC

13:30-15:00 1. Keynote Speeches Location: 307A+B,CNCC

15:00-15:15 Tea Break

15:15-16:45 1. Keynote Speeches Location: 307A+B,CNCC

19:00-21:00 Welcome Reception Location:Plenary Hall A, CNCC

Wednesday, Sept. 17

08:30-10:00 Technical Oral Presentation

2. Livestock Environment Control

Location: 307A,CNCC

3. Livestock Waste Treatment Location: 307B,CNCC

10:00-10:15 Tea Break

Location: 307A,CNCC

15:00-15:15 Tea Break

5. Precision Livestock Farming

Location: 307A,CNCC

19:30-21:30 Chinese Cultural Night Location: Beijing Performance & Arts Centre

Overview of Session II: Farm Buildings, Equipment, Structures and Environment

Thursday, Sept. 18

7. Greenhouse Environment and Equipment

Location: 307A,CNCC

8. Livestock Structures ＆Equipment ＆ Animal Welfare

Location: 307B,CNCC

10:00-10:15 Tea Break

Location: 307A,CNCC

8. Livestock Structures ＆Equipment ＆ Animal Welfare

Location: 307B,CNCC

Location: 307A,CNCC

10. Aquaculture Farming Location: 307B,CNCC

15:00-15:15 Tea Break

Location: 307A,CNCC

10. Aquaculture Farming Location: 307B,CNCC

16:00-17:00 Closing Ceremony Location:309A+B, CNCC

19:00-21:00 Gala Dinner Location:Plenary Hall A, CNCC

Friday, Sept. 19 08:00-15:00 Technical Tours

OPENING CEREMONY OF SESSION Ⅱ

FARM BUILDINGS, EQUIPMENT, STRUCTURES AND

ENVIRONMENT

ORAL PRESENTATIONS

SEPTEMBER 16, 2014

TUESDAY AFTERNOON

13:30-16:45

1. Keynote Speeches

Location: Room 307A-307B, the 3rd floor of CNCCChair: Prof. Guoqing Zhang, Aarhus University, Denmark

15:00-15:15 Tea Break

Location: Room 307A-307B, the 3rd floor of CNCCChair: Prof. Baoming Li,

13:30-14:00 0826-201

The development and results of the Patio housing system for broilers - animal health, welfare and environmental impactProf. Peter Groot KoerkampProfessor of Biosystems Engineering at the Farm Technology group, Interim Chair Holder at the Animal Production Systems group, Wageningen University, the Netherlands

14:00-14:30 0826-202The introduction of animal welfare in ChinaProf. Jun BaoPresident of Northeast Agricultural University, China

14:30-15:00 2014-1597

Precision Livestock Farming technologies: basic principles and examplesProf. Daniel BerckmansProfessor of Department of Biosystems, Faculty of Bioscience Engineering at KU Leuven, Belgium

Deputy-dean of College of Water Resources and Civil Engineering, China Agricultural University, China

15:15-15:45 0826-203

Trends in CFD application in agricultureProf. In-Bok LeeProfessor of Laboratory of Aero-Environmental & Energy Engineering (A3EL), Department of Rural Systems Engineering, College of Agricultural & Life Sciences, Seoul National University, Korea

15:45-16:15 0826-204

Energy-saving techniques in Chinese solar greenhouseProf. Qichang YangChief Scientist and Director of the Research Center for Protected Agriculture & Environmental Engineering, Chinese Academy of Agricultural Sciences (CAAS), Director of Key Lab of Energy Saving & Waste Management of Agricultural Structures, Ministry of Agriculture, China

16:15-16:45 0826-205

New biofiltration technologies applied in recirculating aquaculturalsystemsProf. Songming ZhuProfessor and Executive Dean of College of Biosystems Engineering and Food Science, Zhejiang University, China

08:30-09:00 2014-0486

The influence of diurnal variation in animal activity and digestion on animal heat productionProf. Søren PedersenAarhus University, Denmark

09:00-09:20 2014-0196

Development of a reference test installation for the validation of naturally ventilated airflow rate measurement techniquesPhilippe Van OverbekeInstitute for Agricultural and Fisheries Research, Belgium

SEPTEMBER 17, 2014

WEDNESDAY MORNING

08:30-12:15

Location: Room 307A, the 3rd floor of CNCCChair: Prof. Daniel Berckmans, Professor of Department of Biosystems, Faculty of

Bioscience Engineering at KU LeuvenKU Leuven, Belgium

10:00-10:15 Tea Break

Location: Room 307A, the 3rd floor of CNCCChair: Prof. Jun Bao,

09:20-09:40 2014-1247

Effect of pigment intensity and region of eggshell on the spectral transmission of visible light that passed the eggshell and the element change during the incubationYue YuZhejiang University, China

09:40-10:00 0508-005Water use at Texas High Plains dairiesKen CaseyTexas A&M University, USA

10:15-10:35 2014-1586

Automating CFD to calculate ventilation rate of a naturally ventilated buildingSe-Woon HongKU Leuven, Belgium

10:35-10:55 0523-010

Development of web-based forecasting system of airborne livestock virus spread using Open FOAM CFD technologyTae-hwan HaSeoul National University, Korea

10:55-11:15 0523-012

Statistical analysis of aerial dust in a mechanically ventilated pig house considering worker’s respiratoryYeseul JoSeoul National University, Korea

11:15-11:35 2014-0948

Environmental decontamination with slightly acidic electrolyzed water for reducing pathogens in layer housesLi NiChina Agricultural University, China

11:35-11:55 2014-1589

A study of computational fluid dynamics simulation airflow, temperature and humidity in weaner house in Southern ChinaQiaona PanZhejiang University, China

11:55-12:15 2014-0753

Influence of spraying time on cooling effect of sprinkler system in dairy barnsZhihui YanChina Agricultural University, China

Deputy Party Secretary and President of Heilongjiang Bayi Agricultural University, China

10:00-10:15 Tea Break

Location: Room 307B, the 3rd floor of CNCCChair: Dr. Jiqin Ni, Purdue University, USA

3. Livestock Waste Treatment

Location: Room 307B, the 3rd floor of CNCCChair: Dr. Joseph Zulovich, University of Missouri, USA

10:15-10:35 2014-1533

How to reduce various environmental impacts from animal manure by more than 50% - Results of a design and evaluation study on strategies for integrated manure managementPeter Groot KoerkampWageningen University, the Netherlands

10:35-10:55 0512-002

VOC and H2S emissions from full-scale land spreading of manure slurry investigated by dynamic chambersTavs NyordAarhus University, Denmark

10:55-11:15 2014-1389

Optimization of coagulation-flocculation process for biogas slurry pretreatment using response surface methodologyLei WangZhejiang University, China

11:15-11:35 2014-1380

Modelling of a chemical air scrubber for the removal of gaseous emissions from pig housing facilitiesCaroline Van der HeydenGhent University, Belgium

08:30-09:00 2014-1037Case studies: dry composting pig and poultry mortalities Prof. Thomas BanhaziUniversity of Southern Queensland, Australia

09:00-09:20 0508-011

Production of nitrogen fertilizer using acid wet scrubbers at animal facilitiesLingying ZhaoOhio State University, USA

09:20-09:40 2014-0134Biofiltration for treatment of exhaust air at animal houses Roland W. MelseWageningen University, the Netherlands

09:40-10:00 2014-0177

Computational fluid dynamics investigation of particle collection by vegetative barriersLi GuoJilin University, China

11:35-11:55 2014-0740

Carbon balance of valorization of livestock waste through biohythane coupled with algae technologyJiaming LiChina Agricultural University, China

SEPTEMBER 17, 2014

WEDNESDAY AFTERNOON

13:30-17:35

Location: Room 307A,the 3rd floor of CNCCChair: Prof. Søren Pedersen, Aarhus University, Denmark

13:30-13:50 2014-1615Effect of roofing material type on microclimate in the buildings of sheepHatemCairo University, Egypt

13:50-14:10 2014-0367

Influencing factors of dust removal efficiency by electrostatic spray and the correlation analysisYu RuNanjing Forestry University, China

14:10-14:30 2014-0195Point extraction system for partial air cleaning in finishing pig housesAnders Leegaard RiisPig Research Centre, Danish Agriculture &Food Council, Denmark

14:30-14:50 2014-1173

Slightly acidic electrolyzed water treatment for disinfection on the surface of tire inoculated with Escherichia coli O157:H7 and Salmonella enteritidisYitian ZangChina Agricultural University, China

15:00-15:15 Tea Break

5. Precision Livestock Farming

Location: Room 307A, the 3rd floor of CNCCChair: Prof. Matteo Barbari, Professor of Agricultural, Food and ForestrySystems, University

of Florence, Italy

13:30-14:00 2014-0137

Ammonia emissions from naturally ventilated dairy cattle buildings – a review of field measurements in European countries Prof. Guoqiang ZhangAarhus University, Denmark

14:00-14:20 0618-066

Potential NH3 and CH4 emissions from pig slurries produced in commercial and experimental sites Salvador CalvetUniversitat Politecnica de Valencia, Spain

6. Livestock Waste Treatment

Location: Room 307B, the 3rd floor of CNCCChair: Dr. Lingying Zhao,

15:15-15:35 0506-010

Image-based precision livestock farming tool supporting the analysis of broiler chicken activity and welfareDaniel BerckmansKU Leuven, Belgium

15:35-15:55 2014-1595

Practical implementation of an automatic 3D vision system for dairy cow locomotion monitoringDaniel BerckmansKU Leuven, Belgium

15:55-16:15 2014-1593Automatic weight estimation of individual pigs using image analysisDaniel BerckmansKU Leuven, Belgium

16:15-16:35 2014-1629Dairy cow body condition scoring in automatic milking systems by 3D visionXiangyu SongLely Industries N.V., the Netherlands

16:35-16:55 0618-069

Development of an automatic animal dimension detection system based on stereo visionZhuo LiChina Agricultural University, China

17:15-17:35 2014-0132Accurate discrimination of individual dairy cattle using video analysisKaixuan ZhaoNorthwest A&F University, China

Professor of Department of Food, Agricultural and Biological Engineering, Ohio State University, USA

14:20-14:40 0519-011

Impact of alternative air exhaustion in housing for poultry on concentration of harmful gases in the air Stefan MihinaSlovak University of Agriculture in Nitra, Slovakia

14:40-15:00 2014-0121

Assessment of different technical solutions to reduce the fossil fuel consumption of agricultural buildings and machinery on the farm to limit direct CO2 emissions Mélynda HassounaINRA, France

15:00-15:15 Tea Break

Location: Room 307B, the 3rd floor of CNCCChair: Dr. Teng Teeh Lim, University of Missouri, USA

15:15-15:35 2014-0289

Aerial pollutant emissions from two manure-belt layer hen houses with two-year continuous monitoring Jiqin NiPurdue University, USA

15:35-15:55 2014-0742

Assessment of breath methane measurement with an artificial reference cow in the lab Liansun WuWageningen University, the Netherlands

15:55-16:15 2014-0724

Odor emissions from a dairy cow building in Denmark facilitated with a hybrid ventilation systemDezhao LiuAarhus University, Denmark

16:15-16:35 2014-1000

Using the chamber technique to quantify greenhouse gas emission from the open yard and manure storage of a dairy farm in China Luyu DingChina Agricultural University, China

16:35-16:55 2014-0920

Measurement method for urine puddle depth in dairy cow houses as input variable for ammonia emission modelling Johannes Wilhelmus SnoekWageningen University, the Netherlands

16:55-17:15 0618-067

Greenhouse gas emissions from dairy houses - measurements in naturally ventilated buildingsAlexander SchmithausenBonn University, Germany

10:00-10:15 Tea Break

Location: Room 307A, the 3rd floor of CNCCChair: Prof. Gerard P.A. Bot, Professor of Wageningen University, The Netherlands

08:30-09:00 0826-206

Status of the speaking plant approach in greenhouse environmental conditioning Prof. Gerard P. A. BotWageningen University, the Netherlands

09:00-09:20 2014-0896

Measured energy use in a greenhouse with tomatoes compared to predicted use by a mechanistic model including transpirationSven NimmermarkSwedish University of Agricultural Sciences, Sweden

09:20-09:40 0618-090

PAR transmittances of condensate covered solar greenhouse covering materials Nan WangChina Agricultural University, China

09:40-10:00 2014-1089Thermal performance of solar-greenhouse with a new type composite wallMing LiChinese Academy of Agricultural Engineering, China

SEPTEMBER 18, 2014

THURSDAY MORNING

08:30-12:15

Location: Room 307A, the 3rd floor of CNCCChair: Prof. Qichang Yang, Chief Scientist and Director of the Research Center for

Protected Agriculture & Environmental Engineering, Chinese Academy of Agricultural Sciences (CAAS), Director of Key Lab of Energy Saving & Waste Management of Agricultural Structures, Ministry of Agriculture, China

10:15-10:35 2014-1500The light environment in the greenhouse: a reviewDake WuXinan University, China

10:35-10:55 2014-1636

Study on the law of flooding and releasing heat of solar heat pipe filled with phase change materials (PCMs) in greenhouseYong WuChina Agricultural University, China

10:55-11:15 2014-0703

Effect of acoustic frequency technology on the growth of strawberry in solar greenhouseReda EmamChina Agricultural University, China

11:15-11:35 2014-0702Response of cucumber seedlings to audible sound wavesReda EmamChina Agricultural University, China

11:35-11:55 0618-062

Effects of daily fertigation on soil properties and cucumber yield in Chinese solar greenhouseMin WeiShandong Agricultural University, China

8. Livestock Structures; Equipment; Animal Welfare

Location: Room 307B, the 3rd floor of CNCCChair: Prof. Thomas Banhazi, University of Southern Queensland, Australia

08:30-08:50 2014-0967Devices to provide post-weaning pigs with wood as manipulable materialMatteo BarbariUniversity of Florence, Italy

08:50-09:10 2014-0644Start-up of a pilot scale anaerobic digestion system for swine finishing barnTeng Teeh LimUniversity of Missouri, USA

09:10-09:30 2014-0148CFD model of regenerative heat exchangerPavel KicCzech University of Life Sciences Prague, Czech

09:30-09:50 2014-0150Mathematical model for optimal arrangement of milking parlor Pavel KicCzech University of Life Sciences Prague, Czech

10:00-10:15 Tea Break

Location: Room 307B, the 3rd floor of CNCCChair: Prof. Peter Groot Koerkamp,

10:15-10:35 0523-014Strategic path of development for live pig healthy aquaculture in ChinaQing LiuChina Agricultural University, China

10:35-10:55 2014-0169Compost barns for dairy cows - design criteria and animal welfareOfner - Schroeck ElfriedeLFZ Raumberg - Gumpenstein, Austria

10:55-11:15 2014-1607

Classification of potential sheep heat-stress levels according to the prevailing meteorological conditionsDimitris K. PapanastasiouCenter for Research and Technology – Hellas, Greece

11:15-11:35 2014-0371

Nonlinear finite element static analysis and experiment of laying breeder hens cage floorTengfei LiChina Agricultural University, China

11:35-11:55 0512-001

Improvement of the Multipath Routing Algorithm and its application in the nursing pigstyChanghua MaJiangsu University, China

11:55-12:15 0506-004Mean lameness over herds by meta analysisAhmet Erhan KarahanEge University, Turkey

SEPTEMBER 18, 2014

THURSDAY AFTERNOON

13:30-15:30

Location: Room 307A, the 3rd floor of CNCCChair: Prof. In-bok Lee,

Professor of Biosystems Engineering at the Farm Technology group, Interim Chair Holder at the Animal Production Systems group, Wageningen University, the Netherlands

Professor of Laboratory of Aero-Environmental &Energy Engineering (A3EL), Department of Rural Systems Engineering, College of Agricultural & Life Sciences, Seoul National University, Korea

13:30-13:50 0523-011

Evaluation of wind pressure coefficient on the greenhouse built in reclaimed land using computational fluid Uk-hyeon YeoSeoul National University, Korea

13:50-14:10 2014-1516

The comprehensive performance of north wall in Chinese greenhouse evaluation model and application based on weighted entropy methodXin ZhangNorthwest A&F University, China

14:10-14:30 0509-019

CFD study on overall and local ventilation rates of greenhouses built in reclaimed land considering thermal condition Tae-hwan HaSeoul National University, Korea

14:30-14:50 0514-003 A novel solar sea water desalination film used in ocean agriculture Hongfei ZhengBeijing Institute of Technology, China

14:50-15:10 0618-025

Strengthening electrochemical reduction of nitrate using methanol and salicylic acidLijun YaoChina University of Geosciences, China

15:10-15:30 0618-091

Tomato fruit firmness and colour change in response to greenhouse microclimate, cultivar and storage conditionsEllen Letsogile ThipeBotswana College of Agriculture, Botswana

10. Aquaculture Farming

Location: Room 307B, the 3rd floor of CNCCChairs: Prof. Songming Zhu,

Prof. Ying Liu, Institute of Oceanology, Chinese Academy of Sciences, China.

13:30-13:50 2014-0344

Effects of light environment factors on the gonadal maturation of Atlantic salmon (Salmo salar) in recirculating aquaculture systems (RAS)Denggao QiuChinese Academy of Sciences, China

Professor and Executive Dean of College of Biosystems Engineering and Food Science, Zhejiang University, China

13:50-14:10 2014-1149

Study on the appropriate ratio of oyster and gracilaria in the progress of managing waste water from Atlantic salmon aquaculture in RASYing LiChinese Academy of Sciences, China

14:10-14:30 0509-044

N removal bacteria analysis in bio-filter different sections of full-scale marine recirculating aquaculture systemYunjie RuanZhejiang University, China

14:30-14:50 2014-1417

The bioturbation study of perinereis aibuhitensis on the organic matter nitrogen and phosphorus release in the sedimentDazuo YangDalian Ocean University, China

14:50-15:10 2014-1420

Primary analysis of the organic-matter and energy budget in the closed-recirculating aquaculture system of perinereis aibuhitensisDazuo YangDalian Ocean University, China

SESSION II

POSTER SESSIONS

13:30 - 17:00

Topic (1) Livestock Environment Control & Livestock Waste Treatment

45 21-001 0618-077Turbulent flow around a rib: numerical vs. wind tunnel

experiments

GerasimosMartzopoulosDepartment of Hydraulics,

Soil Sciences and Agricultural Engineering, Aristotle

University of Thessaloniki

Greece

46 21-002 2014-0166Effect of Roof Cladding on

Quality of Indoor Environment of Stalls

Pogran StefanSlovak University of Agriculture in Nitra

Slovakia

47 21-003 2014-0168Performance of Geotextile-

gravel Bed All-weather Surface for Cattle and Horses

Hans von WachenfeltSwedish University of Agricultural Sciences

Sweden

48 21-004 2014-0248 Passive Systems to Control Microclimate Inside Buildings

Evelia SchettiniUniversity of Bari Italy

49 21-005 2014-0284

Temporal and Seasonal Change of NH3 Concentration: Case Study in An Agricultural,

Forest and Urban Site

Stéphane GodboutIRDA Canada

50 21-006 2014-0553 Composting Villages’ Layer Manure with C50 Bioreactor

Zhao MingjieMAE Wellful Industries Co.,

Ltd., Beijing, ChinaChina

51 21-007 2014-0583

A Study on Airflow, Temperature and Humidity Simulation Base on CFD of

Weaner house in Southern China

Pang QiaonaThe College of biosystems

engineering and Food Science of Zhejiang University

52 21-008 2014-0801Removal Efficiencies in Full-scale Biofilters Cleaning Pig

House Exhaust Air

Rune AndreasenPig Research Centre, Danish Agriculture & Food Council

Denmark

53 21-009 2014-0857

Effects of a Water-cooled Cover on Farrowing Sows

under Hot and Humid Climates

Pang ZhenzhenDepartment of Protected Agriculture Science and

engineering, Hainan University

Topic (2) Greenhouse Structure & Environment & Equipment

57 22-001 0508-019Application of Case for Closed

Cultivation System of Solar Greenhouse in China

Yuan HongboKey Laboratory on Modern

Precision Agriculture System Integration Research of

Ministry of Education, China Agricultural University

58 22-002 0509-008

The Optimum Design of the Air-conditioning System of a Plant Factory with High-efficient Water Use and the

Effect of its Higher Humidity Condition on Growth in Plants

Seiji MATSUODepartment of System Innovation, school of

Engineering, The University of Tokyo

59 22-003 0519-017Effect of CO2 Enrichment and Nutrient on Growth of Tomato

in Solar Greenhouse

Wang HongyuCollege of Water

Conservancy and Civil Engineering, China

60 22-004 0519-018

Effect of CO2 Enrichments under Different Water

Conditions on Growth and Photosynthetic Characteristics

of Tomato Plants in Heliogreenhouse

Zhou ShiliCollege of Water Resources & Civil Engineering, China

61 22-005 0526-021

Estimating Optimum Design of Photo-bioreactor for Cultivating Microalgae

using Computational Fluid Dynamics

Uk-hyeon YeoDepartment of Rural Systems

Engineering, Research Institute for Agriculture and

Life Science, College of Agriculture and Life Sciences,

Seoul National University

62 22-006 2014-0063

Research and Development of Greenhouse Automatic Transfer Device for Spray

Plant Protection Equipment

Zhuo JieqiangBeijing Agricultural

Machinery Institute, Beijing, China

54 21-010 2014-0875

Research on the Action Mechanism of Sheep Taking Medicine Shower in Strong

Circulation Spray Fireld

Zhang LichunInner Mongolia Agricultural

University, Hohhot, Inner Mongolia, China

55 21-011 2014-1052Odor Reduction from Pig

Housing using Alkaline Air-cleaning

Malene JoergensenPig Research Centre, Danish Agriculture & Food Council

Denmark

56 21-012 2014-0289

Aerial Pollutant Emissions from Two Manure-Belt Layer Hen Houses with Two-Year

Continuous Monitoring

Jiqin NiPurdue University

United States

63 22-007 2014-0064

Study on Experimental of Spraying Liquid Medicine of Prevention Plant Disease

Spraying Equipment in Greenhouse

Zhuo JieqiangBeijing Agricultural

Machinery Institute, Beijing, China

64 22-008 2014-0065

Study on Experimental Comparison of Energy

Consumption and Dehumidification of

Dehumidifier in Greenhouse

Zhuo JieqiangBeijing Kingpeng

International Hi-Tech Corporation, Beijing, China

65 22-009 2014-0736Design and Simulation

Analysis of Greenhouse Heat-exchanging Dehumidifier

Xin MingjinCollege of Engineering, Shenyang Agricultural

University, Shenyang, China

66 22-010 2014-1090Application of BP Neural

Network in Predicting Solar Greenhouse Soil Temperature

He FenChinese Academy of

Agricultural EngineeringChina

67 22-011 2014-1091

Feasibility Study for Using Solar Thin-film Cell Module as Glazing Covering Material of Greenhouse South-facing

Wei XiaomingInstitute of facility

Agriculture, Chinese Academy of Agricultural

Engineering

68 22-012 2014-1239Research Advances in

The Natural Ventilation of Greenhouse Based on CFD

Song WeiKey Laboratory of Modern Agricultural Equipment and

Technology, Ministry of Education, Jiangsu University

69 22-013 2014-1281

Research on Calculation Method of Geometric

Parameters about the Solar Greenhouse’s Lighting

Surfaces

Bai YikuiCollege of Water

Conservancy, Shenyang Agricultural University

70 22-014 2014-1464Simulation of Heat Storage

Capacity of Solar Greenhouse Walls in Different Regions

Cui WenhuiCollege of Water Resource

71 22-015 2014-1488

Coupling Diurnal Light Distribution and Temperature Variation to Simulate Solar

Greenhouse

Du JianjunBeijing Research Center for Information Technology in

Agriculture, Beijing Academy of Agriculture and Forestry

Sciences

72 22-016 2014-1516

The comprehensive performance of north wall in

Chinese greenhouse evaluation model and application based on weighted entropy method

Zhang XinCollege of Horticulture,

Northwest Agriculture and Forestry University

73 22-017 2014-1548

Effect of Incident Angle on Radiation Transmittance of Solar Greenhouse Covering

Materials

Wang NanCollege of Water Resource

Topic (3) Livestock Structure ＆ Equipment

Topic (4) Aquaculture Farming

74 23-001 0519-013

Design of Intelligent Monitoring and Control System in Poultry House

Based on LabVIEW

Benhua ZhangCollege of Engineering, Shenyang Agricultural

University

75 23-002 0526-022

Design of Small-scaled Wind Power Generation System

Using Exhaust Flow of Livestock House

Se-woonKU LEUVEN, Kasteelpark

Arenberg 30Korea

76 23-003 0618-075Growing finishing pig weight estimation accuracy analysis

based on LabVIEW

Mao TaotaoCollege of water resources & civil engineering, China

Agricultural University, Beijing, China

77 23-004 0618-095The full traceability

management of animals and animal products

Lu ChanghuaInstitute of Veterinary

Medicine, Jiangsu Academy of Agricultural Sciences

78 23-005 2014-0053Comparison between Laying

Hen Performance in The Perch System and The Cage System

Cao YanfeiCollege of Water Resources

79 23-006 2014-0385

Improving Thermal Performance of Earth-to-air Heat Exchanger By Wetting

The Ground: An Experience in Southern Iraq

Morshed WasseemLu Changhua

University of FlorencItaly

80 23-007 2014-0391 Cultivated Pack Barns Improve Longevity of Dairy Cows

Leso LorenzoUniversity of Florence Italy

81 23-008 2014-0445Effects of different feeding

patterns on reproductive hormones in group-housed gilt

Wang ShuhuaShanxi Academy of

Agricultural SciencesChina

82 23-009 2014-1205

The impact of tunnel ventilation on thermal

environment in solar heated swine housing

Yuan YuemingCollege of Engineering, Jilin

83 24-001 2014-1256

A New Design Concept of using Slightly Acidic Electrolyzed Water for

Disinfection System in RAS

Pei LuoweiKey Laboratory of Equipment

and Informatization in Environment Controlled Agriculture, Ministry of

Agriculture

84 24-002 2014-1302

Correlation Analysis of pH and Available Chlorine Concentration of Slightly Acidic Electrolyzed Water

under the Condition of Mixture

Qi FanyuKey Laboratory of Equipment

and Informatization in Environment Controlled Agriculture, Ministry of

Agriculture

85 24-003 2014-1481Effect of various woods on

structural strength in Korean ginseng cultivation facilities

Yun NamkyuDepartment of Agricultural

Engineering, National Academy of Agricultural

Science

SESSION III

EQUIPMENT ENGINEERING FOR PLANTS

OPENING CEREMONY OF SESSION III

EQUIPMENT ENGINEERING FOR PLANTS

ORAL PRESENTATIONS

SEPTEMBER 16, 2014

TUESDAY AFTERNOON

13:30-16:55

13:40-14:00 0826-301

Integrated solutions to increase the productivity and convenience of agricultural production systemsDr. John F. ReidDirector, Product Technology and Innovation at the Moline Technology Innovation Center (MTIC), John Deere, USA

14:00-14:20 0826-302

Advanced manufacturing technologies for agricultural equipmentProf. John Kenneth SchuellerChair of CIGR Technical Section III, Department of Mechanical and Aerospace Engineering, University of Florida, USA

Location: Room 311A-311B, the 3rd Floor of CNCCChair: Prof. Xiwen Luo,

Open Speeches13:30-13:35 Prof. Xiwen Luo 13:35-13:40 Prof. John Kenneth Schueller

1. Keynote Speeches

Location: Room 311A-311B, the 3rd Floor of CNCCChair: Prof. Xiwen Luo, Academician, Chinese Academy of Engineering, China

Academician, Chinese Academy of Engineering, Academic Degree Committee of Chinese State Council, President of Chinese Society of Agricultural Machinery (CSAM), China

Chair of CIGR Technical Section III, Department of Mechanical and Aerospace Engineering, University of Florida, USA

14:20-14:40 0826-303

Global problems of mechanization of Russian Federation AgricultureProf. Oleg MarchenkoHead of Department of All-Russia Research Institute for Mechanization in Agriculture (VIM), Russia

14:40-15:00 0826-304

Effect of UHMW-PE protuberances' dimensions on sliding resistance and normal adhesion of biomimetic plates in Bangkok clay soilProf. Vilas M SalokheFormer President of the Asian Association for Agricultural Engineering, Profess of Kaziranga University, India

15:00-15:15 Tea Break

Location: Room 311A-311B, the 3rd Floor of CNCCChair: Prof. John Kenneth Schueller, Uiversity of Florida, USA

15:15-15:35 0826-305

New technology and new equipment of rice production mechanizationProf. Xiwen LuoAcademician, Chinese Academy of Engineering, Academic Degree Committee of Chinese State Council, President of Chinese Society of Agricultural Machinery (CSAM) , China

15:35-15:55 0826-306

Automation in crop farming – state-of-the-art and where do we go from here?Prof. Hermann AuernhammerDepartment of Live Science Engineering, Munich University of Technology, Germany

15:55-16:15 0826-307

How does tractor design and infield management influence conservation agriculture and should it cause a rethink of the tractor?Prof. Allen Jack McHughChief sector of technological basis of agri-ecosystem development, State Research Institution “North-West Research Institute of Agricultural Engineering and Electrification”, University of Southern Queensland, Australia

16:15-16:35 2014-0642Development of laser-guided precision sprayers for tree crop applicationsProf. Heping ZhuLead Scientist in the Application Technology Research Unit (ATRU), USA

16:35-16:55 0526-001

Concept of modern experimental field for agroecological researchProf. Vladislav MininFormer Executive Secretary of the International Association on Mechanization on Field Experiments , Chief of Euro-Asian Center for Sustainable Development of Rural Areas, Russia

15:00-15:15 Tea Break

Location: Room 306A , the 3rd Floor of CNCCModerator: Prof. Julian Vincent, University of Bath, UK

10:15-10:35 2014-0244

Useful lessons from nature for improving energy efficiency and sustainable developmentProf. Yuying YanUniversity of Nottingham,UK

10:35-10:55 2014-0458

Biology inspired fiber based materials for water management in plant productionDr. Thomas StegmaierGerman Institute for Textile and Fibre Research Denkendorf, Germany

10:55-11:15 2014-0791

Bionic muscle-research on performance output and preparation of linear driving unit using ionic polymer metal composites (IPMC)Prof. Gang ZhaoHarbin Engineering University, China

08:30-09:00 2014-0294Applications of bionics in agricultureProf. Julian VincentUniversity of Bath, UK

09:00-09:30 2014-0037

Design and development of a tractor drawn conservation Tillage bionic ripper planterProf. Timothy SimalengaCentre for Coordination of Agricultural Research and Development in South Africa (CCARDESA)

09:30-10:00 0826-311Tractor EU CertificationProf. Paolo PL PinciroliEuropean Certifying Organization, Italy

SEPTEMBER 17, 2014

WEDNESDAY MORNING

08:30-11:55

Sub-session I2. Agricultural Bionic Mechanism Design and Manufacturing; Tractors

Location: Room 306A, the 3rd Floor of CNCCModerator: Prof. Jianqiao Li, Chairman of Terrain-machine System Committee of CSAM, China

11:15-11:35 2014-1168

Experiments on the erosion resistance of bionics surface with the characteristics of material coupled with patternDr. Chengchun ZhangJilin University, China

11:35-11:55 2014-0638

Anti-attachment function of slippery zones in nepenthes pitchers and its application in biomimetic developing agricultural pest trappingDr. Lixin WangHebei University of Science and Technology, China

Sub-session II3. R & D for Farm Machinery and Equipment; Tillage and Soil Preparation; Planting, Seeding, Fertilizing, Plant Protection and Crop Quality

Location: Room 311A, the 3rd Floor of CNCCModerator: Mr. Xuejun Yang, Deputy Head, Modern Agricultural Equipment Co.,Ltd., China

08:30-08:45 0826-322

Global perspectives on conservation agriculture and the FAO “Save & Grow” conceptProf. Josef KienzleFAO

08:45-09:00 0826-321Conservation agriculture in ChinaProf. Hongwen LiChina Agricultural University, China

09:00-09:15 0826-345Intoduction to IAMFE and Mechanization of Field Experiments in ChinaProf. Shuqi Shang, Qingdao Agricultural University, China

09:15-09:30 2014-1398

Current situation and development proposal of vegetable production mechanization in ChinaDr. Yongsheng ChenNanjing Research Institute for Agriculture Mechanization, China

09:30-09:45 0826-346Alternate row planting with stubble retation and matching implementsProf. HongleiJiaJilin University, China

09:45-10:00 2014-0033Development of an intelligent style of precision maize seederDr. DuanyangGengShandong University of Technology, China

10:00-10:15 Tea Break

Location: Room 311A , the 3rd Floor of CNCCModerator: Prof. Heping Zhu, Lead Scientist in the Application Technology Research Unit (ATRU)

Sub-session III4. Harvesting and Animal Husbandry Technology

Location: Room 306B, the 3rd Floor of CNCCModerator: Prof. Weiming Ding, Nanjing Agricultural University, China

08:30-08:45 2014-0450Effects of seed delivery tube and air pressure on the uniformity of seed distributionDongxing ZhangChina Agricultural University, China

08:45-09:00 2014-0904

Development of a PTO driven generator for an electric wheel drive of A potato harvesterZhigang ZhaoGKN Land Systems, China

09:00-09:15 2014-1080Instrumentation design for combine harvester manufactured quality evaluationShumao WangChina Agricultural University, China

10:15-10:30 2014-0337Design and experimental study on rice drip irrigation under plastic film planterProf. Lei He (Xuegeng Chen)XinJiang Academy of Agricultral and Reclamation Science, China

10:30-10:45 0509-003

Investigation of effective sonic combination for improving quality of red lettuce depending on vegetation stagesDr. Yeseong KangGyeongsang University, Korea

10:45-11:00 2014-0373Optimization design of portable tree transplanting machine’s shock absorberDr. Jianxi ZhuZhejiang University, China

11:00-11:15 2014-0245Biodegradable spray mulching coatings based on hydrolyzed proteinDr. EveliaSchettiniUniversity of Bari, Italy

11:15-11:30 2014-0765

Structure optimization of pollination nozzle on hybrid rice pollination machine and pollination experimentDr. Chen TangZhejiang University, China

11:30-11:45 0509-056

Performance Values of a Disk Chipper During Working with Pomegranate Pruning ResiduesDr. Yiğit.MeteAkdeniz University, Turkey

11:45-12:00 0523-013Investigations and DEM-Simulation of Disc MowersSebastian KemperTU Braunschweig, Germany

09:15-09:30 2014-1228

The design and experiment on the short conveying channle of sugarcane billet harvesterQingting LiuSouth China Agricultural University, China

09:30-09:45 2014-0601Simulation of vibration harvesting mechanism for sea buckthornLongsheng FuNorthwest Agricultural and Forestry University, China

09:45-10:00 2014-0213

Cost efficient surface condition determination system for sugar beets for a harvester cleaning control using an industrial RGB cameraVadim TsukorUniversity of Applied Sciences Osnabrueck, Germany

10:00-10:15 Tea Break

10:15-10:30 2014-0715

Organisation and profit-sharing in mechanised sugarcane harvesting: is australias experience relevant to China?Malcolm Keith WegenerThe University of Queensland, Australia

10:30-10:45 2014-0723Analysis of harvesting and logistic concepts for ensiling grassStefan ThurnerBavarian State Research Centre, Germany

10:45-11:00 2014-0994

Introduction, demonstration and promotion of mechanical cassava harvesting in Sub-Saharan AfricaEmmanuel BobobeeAgricultural Research Council; South Africa

11:00-11:15 2014-0393Experiments on Litchi Fruit Mechanical Property and Micro-mechanical DamageMin YeSouth China Agricultural University, China

11:15~11:30 2014-0224Development of 4SY-1.8 Rape WindrowerLei LiHuazhong Agricultural University, China

11:30~11:45 2014-0315

Control System Design for Round Baler/Wrapper Combine Based on Embedded ControllerJianping WangHuhhot Branch of Chinese Academy of Agricultural Mechanization Science, China

11:45-12:00 2014-0228

Design of 4LMZ-160 Ramie Harvester and Analysis on its CutterCheng ShenNanjing Research Institute for Agricultural Mechanization, Ministry of Agriculture, China

Subsession IV5. Robotics and Vehicle Automation

Location: Room 311B, the 3rd Floor of CNCCModerator: Prof. Qin Zhang, Washington State University, USA

10:00-10:15 Tea Break

Location: Room 311B, the 3rd Floor of CNCCModerator: Prof. John Kenneth Schueller,University of Florida, USA

08:25-08:45 0825-001KEYNOTE: Perception-based navigation of agricultural vehiclesProf. Shufeng HanDeere & Co., USA.

08:45-09:00 0825-002

Wheel-slip control on an intelligent "Bin-dog" system in natural orchard environmentDr. Yunxiang YeWashington State University, USA

09:00-09:15 0825-004

Principle analysis and parameter optimization for under-actuated end-effector manipulator for apple pickingDr. Yaxin YuZhejiang Sci-Tech University, China

09:15-09:30 0825-005Field evaluation of the robotic twining prototype for high-trellis hop productionDr. Jianfeng ZhouWashington State University, USA

09:30-09:45 0825-006

Research on orchard working vehicle active safety control method based on bodywork attitude predictionDr. Xin WangChina Agricultural University, China

09:45-10:00 2014-0181Innovative density measuring system for new soil compactorDr. Jan HäblerInstitute of Agricultural and Urban Ecological Projects, Germany

10:15-10:30 2014-0204

Design and experimental study on the equipment of take directional seedling to the melon category grafting robotDr. Chuanyu WuZhejiang Sci-Tech University, China

10:30-10:45 0825-007

Effects of cross-track errors on sugarcane harvester performance stubble height and cane stalk lossDr. Shaochun MaWashington State University, USA

10:45-11:00 0825-008Design and configuration of a walking robot platform for force controlDr. Bo JinZhejiang University, China

11:00-11:15 0825-009

The method of obtaining the relative position and orientation for the master-slave agricultural vehicles based on stereo visionDr. Weiping BiNangjing Agricultural University, China

11:15-11:30 0825-010Automatic navigation system research for rice planterDr. Liguo WeiChinese Academy of Agricultural Mechanization Sciences, China

11:30-11:45 0825-011

Design and implementation of identification and location system for bagging robotDr. Hui WangChineseAcademy of Agricultural Mechanization Sciences, China

11:45-12:00 2014-0130

Design and Optimization of The Stroke Adjustable Chinese Hickory HarvesterXiao-Qiang DuCollege of Mechanical Engineering and Automation, Zhejiang Sci-Tech University

SEPTEMBER 17, 2014

WEDNESDAY AFTERNOON

13:30-17:00

Location: Room 306A, the 3rd Floor of CNCCModerator: Prof. Timothy Simalenga,

13:30-13:50 0526-023Improving sticky soil handling capability of disc seeders by bionic modificationProf. Rashid QaisraniDepartment of Agriculture, Fisheries and Forestry, Australia

13:50-14:10 2014-0721Design and development of biomechatronic productsProf. Shujun ZhangThe University of Gloucestershire, UK

Centre for Coordination of Agricultural Research and Development in South Africa

14:10-14:30 2014-0055

Structure design and performance evaluation of bionic wheel travelling on sandDr. Rui ZhangJilin University, China

14:30-14:45 2014-0664Performance analysis of planetary gear reducerJing HeShandong University of Science and Technology, China

14:45-15:00 2014-0788Simulation and analysis on a new bionic mechanism to snap corn-earLi ZhangJilin University, China

15:00-15:15 Tea Break

Location: Room 306A, the 3rd Floor of CNCCModerator: Prof. Thomas Stegmaier,

German Institute for Textile and Fibre Research Denkendorf, Germany

15:15-15:35 2014-0030Bionic mechanism design inspired from biological musculoskeletal systemsDr. Lei RenUniversity of Manchester, UK

15:35-15:55 2014-0028

Reviewing soil-tool adhesion in context of reducing adhesive forces in cohesive soilsDr. Peeyush SoniAsian Institute of Technology, Thailand

15:55-16:15 2014-0194

Design and experimental research on wind turbine blade inspired by the airfoil of Long-eared OwlDr. Weijun TianJilin University, China

16:15-16:30 2014-1416The sand scorpion erosion resistance online detection researchMr. Daobing ChenJilin University, China

16:30-16:45 2014-0854

Bionically inspired serrated structure for improving efficiency of soil surface micro-topography preparationMr. Zhihong ZhangKunming University of Science and Technology, China

16:45-17:00 2014-0711Experimental study on traction performance of wire mesh wheel under light loadMr. Han HuangJilin University, China

13:30-13:45 0826-323Status and development of the agricultural aerial plant protectionProf. Xuejun YangModern Agricultural Equipment Co.,Ltd., China

13:45-14:00 0519-009

Agricultural applications of the practical utility platform for developing countriesProf. John H Lumkes Jr. Purdue University USA

14:00-14:15 2014-0509

Research status of high-performance rotary potted-seedling transplanting mechanismProf. Gaohong YuZhejiang Sci-Tech University, China

14:15-14:30 2014-1271

Experiment on physical and mechanical properties of seedling pot for automatic vegetable transplanterYanhai TangZhejiang University, China

14:30-14:45 2014-0585Study on the hydraulic performance of semi-permeable membrane moistubeProf. Yanxiang ZhuJiangsu University, China

14:45-15:00 2014-0811

A research on intelligent of semipermeable membrane micro-moist irrigation technologyProf. Cheng YanJiangsu University, China

15:00-15:15 Tea Break

Location: Room 311A , the 3rd Floor of CNCCModerator: Prof. Allen Jack McHugh, University of Southern Queensland, Australia

15:15-15:30 0519-012

Development and performance evaluation of a liquid manure injector for sustainable crop productivityDr. S. I. ManuwaLandmark University, Nigeria

15:30-15:45 2014-1440

The mechanical operation technology and necessary machinery in burying straw deeply into dry fieldsDr. Ruili WangShenyang Agricultural University, China

Location: Room 311A, the 3rd Floor of CNCCModerator: Prof. Hongwen Li, China Agricultural University, China

Subsession III8. Harvesting and Animal Husbandry Technology

15:45-16:00 0526-008

The Effect of Vacuum Plate Peripheral Speed of Seed Spacing Accuracy with a Vacuum Type Precision Metering UnitDr.Tülek CerenEge University, Turkey

16:00-16:15 0509-048A Study on the Static Stability of Scissor LiftDr.Chen ZhangCivil Aviation University of China, China

16:15-16:30 2014-0970

Research on introducing gravity and centrifugal force to improve the filling ability of vertical seed-plateProf. Hongxin LiuNortheast Agricultural University, China

16:30-16:45 2014-0220

Design of two-degree-of-freedom manipulator for transplanting rice potted-seedlings based on single-chip controlDr.Yuanjun FanSouth China Agricultural University, China

16:45-17:00 2014-1540

Design and experiment of the 7.5cm row spacing mechanical precise seeder for wheatDr.Jin ZhaoAgricultural University of Hebei, China

13:30-13:45 2014-0372Mechanics model analysis and properties test of cabbage root during cutting processDongdong DuZhenjiang university, China

13:45-14:00 0826-339Analysis and experimental study on stripping process of corn headerAijun Geng, Shandong Agricultural University, China

14:00-14:15 0514-011Analysis of the present situation and the problem of tomato harvesterZhaohui HaoChineseAcademyofAgriculturalMechanizationSciences, China

14:15-14:30 2014-1073

The experiment study of the effect of leaf-stripping and tail-broking speed on sugarcane leaf-stripping and tail-broking qualityJinbing HuZhenjiang University, China

14:30-14:45 2014-1513Performance experiment for grain separation losses monitoring sensorZhenwei LiangJiangsu University, China

15:00-15:15 Tea Break

15:15-15:40 0826-337

Intelligent monitoring and control technology on the cotton picker machine with packingZhonghua MiaoShanghai University, China

15:40-16:05 2014-0124

Effects of growth characteristics of sugarcane clusters and cutting height on harvester performance: cutting qualityShaochun MaWashington State University, USA

16:05-16:30 2014-0913

Research on movement and simulation platform of wine grape vibration-separation mechanismPanpan YuanShihezi University, China

Sub-session IV9. Spectroscopy, Machine Vision, and Biosensing

Location: Room 311B, the 3rd Floor of CNCCModerator: Prof. Enrong Mao, China Agricultural University, China

13:30-13:45 2014-1202Crop sensing using vehicle-based and handheld high-throughput phenotypersProf. Naiqian ZhangKansas State University, USA

13:45-14:00 0825-012

Apple Identification in Field Environment with Over the Row Machine Vision SystemDr. Abhisesh SilwalWashington State University, USA

14:00-14:15 0825-013

Design and performance test of active light source spectrometer for measuring crop canopy reflection spectrumDr. Yang LiNangjing Agricultural University, China

14:45-15:00 2014-0713

Study on dispersion process of granular material in three dimensional parallel vibration sieveZheng MaJiangsu University, China

15:00-15:15 Tea Break

Location: Room 311B, the 3rd Floor of CNCCModerator: Prof. Naiqian Zhang, Kansas State University, USA

15:15-15:30 2014-1193In-field sensing for corn plant architectureDr. Ning WangOklahoma State University, USA

15:30-15:45 2014-0874

Monitoring and managing hydroponic nutrients using ion-selective electrodes in closed lettuce cultivationDr. Daehyun JungSeoul National University, Korea

15:45-16:00 2014-1499

Assessment of chlorophyll contents in dendrobium officinale kimura et migo leaves using hyperspectral imaging techniqueDr. Xibin DingZhejiang University, China

16:00-16:15 2014-1455

Raman spectroscopic study of the upper epidermis of tea in different growth periodDr. Liubin LuoZhejiang University, China

16:15-16:30 2014-1492Estimation of the apple flowers based on aerial multispectral imageDr. Lihua ZhengChina Agricultural University, China

16:30-16:45 0825-016Development of NDVI measurement device based on active light sourceMeng ZhangChina Agricultural University, China

16:45-17:00 2014-0810Design of intelligent target fruit tree insecticide sprayerDr. Wei ZouNational Research Center of Intelligent Equipment for Agriculture, China

14:15-14:30 2014-0441

Rapid diagnosis of tomato nutrition level based on spectral and image information fusion technologyDr. Hongyu LiuJiangsu University, China

14:30-14:45 0825-014Research on cotton row detection algorithm based on binocular visionDr. Zhongxiang Zhu, China Agricultural University, China

14:45-15:00 0825-015Nitrogen nutrition diagnosis of wheat canopy based on spectroscopyDr. Yi ZhaoChina Agricultural University, China

SEPTEMBER 18, 2014

THURSDAY MORNING

8:30-12:00

08:30-08:45 0509-022Tractor instrumentation for draft energy requirement studies in south africaProf. Moses OkothMarenyaUniversity of Venda, South Africa

08:45-09:00 2014-0668A proportional controller for electro-hydraulic hitch system in heavy tractorJianjun ZhaoChina Agricultural University, China

09:00-09:15 0526-005

Evaluation of Power Transmission System of the Tractor Manufactured in Turkey From the Point of Multi-Gear Speed RatiosKomekci FiratDepartment of Agricultural Machinery, Agricultural Faculty, Ege University, Turkey

09:15-09:30 2014-0460A rapid design method for complex gearbox on high-power tractorProf. Zhenghe SongChina Agricultural University

09:30-09:45 2014-0305Development and testing of a small remote control hillside tractorProf. Fuzeng YangNorthwest A&F University

09:45-10:00 2014-1469

Design and overcoming obstacles abilities research of tracked driving chassis with planetary structureDr. Pingyi LiuChina Agricultural University, China

10:00-10:15 Tea Break

Location: Room 306A, the 3rd Floor of CNCCModerator: Zhenghe Song, China Agricultural University, China

10:15-10:30 0618-071

Physical and contact characteristics of seat foam materials for agricultural tractor seating comfortDr. Xiaoping JinChina Agricultural University, China

Location: Room 306A, the 3rd Floor of CNCCModerator: Zhenghe Song, China Agricultural University,China

Subsession II11. R & D for Farm Machinery and Equipment; Tillage and Soil Preparation; Planting, Seeding, Fertilizing, Plant Protection and Crop Quality

Location: Room 311A, the 3rd Floor of CNCCModerator: Prof. Shuqi Shang, Qingdao Agricultural University, China

10:30-10:45 0508-002Simulation on handling stability performance of 4WS vehicleDr. Ying HanNanjing Agricultural University, China

10:45-11:00 2014-0515

A knowledge base system for rapid design on agricultural machinery chassisDr. Yu ChenChina Agricultural University, China

11:00-11:15 2014-0342

Hardware design of electronic control system for tractor power shift transmission based on dual-core MCUQingmei CaoHenan University of Science and Technology, China

08:30-08:45 2014-1596

Evaluation of soil compaction under conservation tillage in south africaDr. Tingmin YuAgricultural Research Council – Institute for Agricultural Engineering, South Africa

08:45-09:00 2014-1588

Simulation of soil dynamic behaviors of seed openers using the discrete element method (DEM)Dr. Haibo ZhouJiamusi University, China

09:00-09:15 0618-040Manufacturing agricultural utility vehicles in sub-saharan africaDavid D. WilsonPurdue University, USA

09:15-09:30 0618-0148

Research on automatic corn seedling transplanterDr. Tie ShiHeilongjiang Province Academy of Agricultural Machinery Engineering Science, China

09:30-09:45 2014-0142

3 D DEM Modeling of Single Disc Furrow Opener Draft Force in Paddy Soil Under No Till SoilDr.Fiaz AhmadNanjing Agricultural University, China

09:45-10:00 2014-1044

Effect of Constant Pressure Agitating on Performance of Fluid Hill-drop SeederDr.Lanxin LiuShenyang Agricultural University, China

10:00-10:15 Tea Break

Location: Room 311A, the 3rd Floor of CNCCModerator: Prof. Vladislav Minin,

Sub-session III12. Harvesting and Animal Husbandry Technology

Location: Room 306B, the 3rd Floor of CNCCModerator: Prof. Emmanuel Bobobee, Agricultural Research Council, South Africa

08:30-08:45 0826-340Research on transporting technologies of standing corn straw plantsLingxin GengHenan University of Science & Technology, China

Chief of Euro-Asian Center for Sustainable Development of Rural Areas, Russia

10:30-10:45 2014-0275

Experimental study of modified starch glue effect on the quality of directional corn seed beltDr. Xueguan ZhaoChina Agricultural University, China

10:45-11:00 2014-0154

Experimental Study on The Filling Performance of Maize Bowl-tray Precision SeederDr. Xin MaoHeilongjiang Bayi Agricultural University, China

11:00-11:15 2014-0525

Influence of Cold Plasma Treatment on Ear Characters and Group Quality of WheatDr. Chen TangZhejiang University

11:15-11:30 2014-0260Vibrating Threshing Performance of wine GrapeProf. Liming XuChina Agricultural University, China

11:30-11:45 2014-0905

Design and Experimental Study on the Device for Measuring the Charge-to-Mass Ratio of the Charged DropletsProf. BaijingQiuJiangsu University, China

11:45-12:00 2014-1044

Effect of Constant Pressure Agitating on Performance of Fluid Hill-drop SeederDr. Lanxin LiuShenyang Agricultural University, China

12:00-12:15 2014-0428

Design and Optimization on a Double-Concave Rocker Seedmeter for Precision SeedingDr. Jiale ZhaoJilin University, China

08:45-09:00 0826-341

Experimental study on modulation technology of corn straw compression mode based on different conditions of compressionXin DongNortheast Agricultural University, China

09:00-09:15 0826-342

Application and research of no-till reseed technology in the natural grassland vegetation restorationKu BuGrassland Research Institute of Chinese Academy of Agricultural Sciences, China

09:15-09:30 0826-343

Straw collecting, baling and comprehensive utilization technique and equipmentXifeng LiuHeilongjiang Province Agricultural Machinery Engineering Scientific Academy, China

09:30-09:45 0826-344Wet harvest technology research and development of solar energy forage dryingJianqiang DuHuhhot Branch of Chinese Academy of Agricultural Mechanization Scienc, China

09:45-10:00 2014-1563Study on the technical regulation of alfalfa hay mechanized harvestingBei WuChinese Academy of Agricultural Mechanization Sciences, China

10:00-10:15 Tea Break

Location: Room 306B, the 3rd Floor of CNCCModerator: Prof. Emmanuel Bobobee, Agricultural Research Council; South Africa

10:15-10:30 2014-0086

Finite Elements Analysis of The Cutter Component in Disc Saw Cutting CaraganaKorshinskii HarvesterShujin QiuShanxi AgriculturalUniversity, China

10:30-10:45 2014-0749

Design of scooping plastic film mulch planter and seeding performance test of cottonFei LiuInner Mongolia Agricultural University, China

10:45~11:00 2014-0880

Three-dimensional Design of A Higher Ground Clearance Combine Harvesters for Ratooning RiceKangyi ZhaiHuazhong Agricultural University, China

11:00~11:15 2014-0986Design and Study on Metering Device of Pneumatic Grass SeederGaixia Zhai Chinese Academy of Agricultural Mechanization Sciences, China

11:15~11:30 2014-0362Design and Experiment of 4SY-1.8 Rape Walking WindrowerYitao LiaoCollege of Engineering ,Huazhong Agricultural University, China

Sub-session IV13. Automation for Off-Road Equipment

Location: Room 311B, the 3rd Floor of CNCCModerator: Dr. Noboru Noguchi, Hokkaido University, Japan

08:30-08:45 0825-017

Multisensor data fusion isobus-solution for a sensor based fertilizer application systemProf. Hermann AuernhammerMunich University of Technology, Germany

08:45-09:00 0825-018Crop sensors for automation of in-season nitrogen applicationDr. Kenneth A. SudduthCropping Systems and Water Quality Research Unit,USDA-ARS , USA

09:00-09:15 0825-019

An intelligent control system for the agricultural materials discharge equipment based on electronic forkliftQing XieChina Agricultural University, China

09:15-09:30 0825-020Research on rapid toe-in detection method for assembled combine harvesterYawei ZhangChina Agricultural University, China

09:30-09:45 2014-1561Control system of kiwifruit picking end-effectorZhen LiNorthwest A&F University, China

09:45-10:00 2014-0112

A knowledge-based application to improve transmission system design automation for agricultural machinesXiaoping JinChina Agricultural University, China

10:00-10:15 Tea Break

Location: Room 311B, the 3rd Floor of CNCCModerator: Prof. Minzan Li, China Agricultural University, China

10:15-10:30 0618-057

Changes of the color distribution and vegetation index according to red leaf lettuce’s growthDr. Seongheon KimGyeongsang National University, Korea

10:30-10:45 0825-021An automated gps-based variable- rate aerial spraying system for uavDr. Yanchao ZhangZhejiang University, China

SEPTEMBER 18, 2014

THURSDAY AFTERNOON

13:30-16:00

Location: Room 311A, the 3rd Floor of CNCCModerator: Prof. Kienzle Josef, FAO

13:30-13:45 2014-0555Evaluating optimization of thermal resistance of rice straw particlesZarei ElmiraZhejiang Universtity, China

13:45-14:00 2014-1544Experimental study of mixing uniformity in jet-mixing apparatusBaijing QiuJiangsu University, China

14:00-14:15 2014-0459Study on mechanization of banana productionZhou YangSouth China Agricultural University, China

14:15-14:30 2014-1517

The influence of single, double subsoiler on soil disturbance under subsoiling conditionsYuxiang HuangNorthwest A & F University, China

10:45-11:00 0825-022Automatic steering system of tractor based on proportional directional valveDr. Zhongxiang ZhuChina Agricultural University, China

11:00-11:15 0825-023Design of hydraulic control valves for tractor autopilot systemDr. Quan JiaChinese Academy of Agricultural Mechanization Sciences, China

11:15-11:30 2014-0778

The structural design and simulation analysis of the palletizing robot and bagged materials handling equipmentWenzhuo WangChina Agricultural University, China

15:00-15:15 Tea Break

15:00-15:15 2014-1039

Effects of the Depth of Machine Sowing on Growth Characteristics of Rapeseed Harvest TraitsDr. Wei XiangHunan Agricultural University, China

15:15-15:30 2014-0115Design of the performance testing device for planter openersDr. Jinhui ZhaoChinese Academy of Agricultural Mechanization Sciences, China

15:30-15:45 2014-1504

The Experimental Research and Analysis of the Seed- Meter Device of the Precision Spaced Planter for CornDr. Wei YangMenobleco.ltd, China

15:45-16:00 2014-1378Study on Seeding Methods of Cucurbits Seedlings for GraftingDr. Tong ChenNorthwest A & F University, China

Sub-session IV15. Precision Farming and Aerial Applications

Location: Room 311B, the 3rd Floor of CNCCModerator: Prof. John Kenneth Schueller, University of Florida, USA

13:30-13:45 0825-036

Unmanned aerial vehicle-based remote sensing system for soybean high-throughput phenotypingDr. Lei F. TianUniversity of Illinois at Urbana-Champaign,USA

13:45-14:00 2014-1522An information acquisition system of vegetable safety based on web serviceDr. Lihua ZhengChina Agricultural University, China

14:30-14:45 2014-1109Research on the buds-injury-prevention system in sugarcane-seeds cuttingProf. Yiqi HuangGuangxi University, China

14:45-15:00 2014-0380

Effect of Replacing Nutrient Solution on Nitrogen Utilization for Aeroponic Culturing LettuceDr. Ibraimo Teleha ChabiteJilin University, China

14:00-14:15 0508-030

Determination of ascorbate peroxidase and acetolactate synthase content in barley leaves using visible/near-infrared spectroscopyChu ZhangZhejiang University, China

14:15-14:30 0825-024

Design of wireless sensor network nodes for intelligent monitoring system of micro-irrigation in litchi orchardJiaxing XieSouth China Agricultural University, China

14:30-14:45 2014-0347An electronic tongue for investigation of strawberry juice characteristicsShanshan QiuZhejang University, China

14:45-15:00 0825-025

Design and implementation of gateway for hybrid antenna clustering routing algorithm in paddy monitoring Baoxia SunSouth China Agricultural University, China

15:00-15:15 Tea Break

SESSION III

POSTER SESSIONS

SEPTEMBER 17, WEDNESDAY

08:30 - 12:00

Topic (1) Terrain-machine bionic engineering and tractors technology

1 31-001 0508-024

Body Height Adjustment System for Vehicles with

Electrically Controlled Air Suspension based on Neural

Network PID Control

Chen YuexiaSchool of Automobile and

Traffic Engineering, Jiangsu University

2 31-002 0618-051

Low Altitude and Low Speed Control of Agricultural

UAV Based on Binocular Recognition Technology

Wang ZhigangDepartment of Mechatronics

Engineering, Applied Technology College, Jilin

University, Changchun, Jilin, China

3 31-003 0618-052

Rugged Terrain Agricultural Information Acquisition

Vehicle Based on Quadruped Bionic Theory

Wang ZhigangDepartment of Mechatronics

Engineering, Applied Technology College, Jilin

University, Changchun, Jilin, China

4 31-004 0618-056 Design of Tractor CAN Bus System based on ISO11783

Yan XianghaiDepartment of Vehicle Engineering, Vehicel &

Transportation Engineering, Henan University of Science and Technology, Luoyang,

5 31-005 2014-0279

Experimental Study on the Abrasive Wear of Bionic

Blade for Soil-rototilling and Stubble-breaking

Ji WenfengHuazhong Agricultural

UniversityChina

6 31-006 2014-0302

The observation of Himalayan marmot’s claw and analysis of the claw’s soil cutting mechanism

Zhang RongrongJilin University China

7 31-007 2014-0414

Bionic Design and Structural Analysis of Stubble-cutting

Blades Using Finite Element Method

Li MoJilin University China

8 31-008 2014-0463

Design on The Integrated Hydraulic System for High Clearance Self-propelled Agricultural Machinery

Chassis

Chen SuiyingChina Agricultural University China

9 31-009 2014-0578

Skyhook-based Body-seat System Simulation for A Semi-active Suspension

Tractor

Song SennanCollege of Engineering, China Agricultural University, Beijing

100083, China

10 31-010 2014-0641Study on a 3-finger bionic manipulator for picking up

an apple

Xiao YingkuiCollege of Biological and

Agricultural Engineering,Jilin University

11 31-011 2014-0713Experimental Research of

Biomechanical Properties of Rape Stalks

Ma ZhengKey Laboratory of Modern Agricultural Equipment and

Technology, Ministry of Education & Jiangsu Province, Jiangsu University, Zhenjiang

Jiangsu, China

12 31-012 2014-0798The Experimental

Researched on Piston Skirt with Bionic Hole

Wu BoKey Laboratory of Bionic Engineering, Ministry of

Education, Jilin University, Changchun, China

13 31-013 2014-0876 The Discussion of Caterpillar Wear Mechanism

Li YaoweiHohhot Vocational College China

14 31-014 2014-0916

Based on Hydraulic Steering Tractor Automatic

Navigation System Development

Fu WeiqiangNational Research Center

of Intelligent Equipment for Agriculture

15 31-015 2014-0939Analysis of the Kinematics

of Chinese Mitten Crab Moving on Enough Terrains

Zhang XiaodongSchool of Mechanical Engineering, Liaoning

University of Petroleum &Chemical Technology

16 31-016 2014-0940

Research on the Model Analysis and Failure

Analysis of Electric Bus Quick Change Battery Box

Zhao JianzhuCollege of Engineering, China

17 31-017 2014-1197

The Three Dimensional Numerical Simulation of

Anti-erosion Properties of the Chiton Acanthochiton

Rubrolineatus

Tian XimeiSecretariat of the International Society of Bionic Engineering,

Jilin University

18 31-018 2014-1308

Research on a New Bionic Walking Wheel with High

Trafficabilities of Travelling on Sand and Surmount

Obstacles Based on Ostrich Foot

Zhang RuiCollege of Biological and

Agricultural Engineering, Jilin University

19 31-019 2014-1415

Unparalleled Sensitivity of Photonic Structures in Trogonoptera Brookiana

Butterfly Wings

Yang MengKey Laboratory of Bionic Engineering (Ministry of Education, China), Jilin

University

20 31-020 2014-1431 Study on coupling bionic technology for crop harvest

Fu JunKey Laboratory of Bionic Engineering,Ministry of

Education,Jilin University

21 31-021 2014-1582Design of Tractor AMT

Electronic Control System Based on DSP

Zhang JingyunDepartment of Vehicle and

Transportation Engineering, Henan University of Science

and Technology

22 31-022 2014-1583Fault Diagnosis Research of Tractor AMT Sensors Based

on SVR

Yan XianghaiDepartment of Vehicle and

Transportation Engineering, Henan University of Science

and Technology

23 31-023 2014-0167Mathematical Model of

Plantar Surface of Ostrich Didactyl Foot

Zhang RuiJilin University China

24 31-024 2014-0746The Design of Bionic

Circular Saws Based on Badger Teeth

Gao ZhihuiCollege of Biological and

Agricultural Engineering, Jilin University, Changchun,China

25 31-025 2014-1466Research and Manufacture

of Stepless Regulation Wheelbase Vehicle

Liu PingyiCollege of Engineering, China

26 31-026 0618-028The Applications of Grid Animation in Production

Safety

Liu PingyiCollege of Engineering, China

27 31-027 0526-033 Inspirations Learning from Far-back Natural Ecology

Tong JinThe College of Biological

and Agricultural Engineering, Jilin University, 5988 Renmin

Street, Changchun 130025, China

28 31-028 2014-1402 Mechanical properties of corn stubble

Mu HaifengKey Laboratory of

Engineering Bionics(Ministry of Education,China),Jilin

University

Topic (3) Harvesting and Animal Husbandry Technology

No. Poster # Paper # Paper Titles Name & Institution Country

29 33-001 2014-0317

Analysis of the Experiments on the Airflow Distribution of Double Centrifugal Fans over

Oscillating Sieve

Cui JunweiModern Agricultural Equipment Co.Ltd.

30 33-002 2014-0322Research and development on the key technologies of plot

combine harvester

Wang JiashengQingdao Agricultural

UniversityChina

31 33-003 2014-0352

Analysis of Caragana Korshinskii Combined Harvester

Dial Tooth Type Conveying Mechanism

Duan ZhenhuaShanxi Agricultural

UniversityChina

32 33-004 2014-0361Simulation of Cyclone

Separating and Cleaning System of Soybean Thresher

Zhao XueguanChina Agricultural

UniversityChina

33 33-005 2014-0408Design and Experiment of the Semi Feeding Harvester Spiral

Knife Removing Membrane

Xu JikangQingdao Agricultural

UniversityChina

34 33-006 2014-0421

Design and Experiment on Differential Speed Snapping Rollers for Horizontal Roller

Corn Harvester

Wang WangJilin University China

35 33-007 2014-0531

Experiment on Mechanical Properties of Corn Plant Related

to Corn Stripping Harvest Mechanism

Zhang ZhilongDepartment of Engineering,

China Agricultural University, Beijing, China

36 33-008 2014-0535

Discussion of Relationship between the Rice Grain′s Link Force and Threshing Tooth′s

Line Speed

Chen DejunJinhua Polytechnic,Jinhua

321007,ChinaChina

37 33-009 2014-0558Optimization Design and

Experiment of A Husker Roller for Maize Harvester

Cui TaoDepartment of Engineering,

38 33-010 2014-0617 Optimization Design of Strip till Mechanism

Wu WeixiongSouth China Agricultural

UniversityChina

39 33-011 2014-0712

Study on Structural and Operating Parameters of A Cob-

picking and Stalk-chopping Combined Mechanism

China Agricultural University

40 33-012 2014-0781

Structure Optimization for Chassis Frame of Combine

Harvester Based on Sensitivity Analysis

Xu LizhangKey Laboratory of Modern

Agricultural Equipment and Technology,Ministry of Education and Jiangsu

Province, Jiangsu University

41 33-013 2014-0823Design and experiment of a

novel laser leveling system for corn harvester

Xing YazhouMechanical and electrical engineering College,Hebei

42 33-014 2014-0897Simulation and Optimization of the Raking Mechanism of

Horizontal Rotary Rake

Zhai GaixiaHohhot Branch of Chinese Academy of Agricultural Mechanization Sciences

43 33-015 2014-0946

Fatigue Reliability Analysis of Combine Harvester Frame Based on The Load Spectrum

Experiment

Li FuqiangCollege of Engineering,

44 33-016 2014-0974

Simulation and Optimization of Multi-link Individual Profiling

Ditching and Repression Mechanism of Grass Seeder

Li YangHohhot Branch of Chinese Academy of Agricultural Mechanization Sciences

45 33-017 2014-1162

The Variation of Material Performance and its Influence on Fatigue for Caterpillar Harvester

in its Operation

Geng GuishengChinese Academy of

Agricultural Mechanization and Sciences

46 33-018 2014-1167

Numerical Simulation and Optimization of Field on Air-

and-screen Cleaning Mechanism Based on CFD

Su TianshengChinese Academy of

Agricultural MechanizationSciences

47 33-019 2014-1384

Pseudo-rigid-body Modeling for Underactuated Strawberry Harvesting Manipulator with Rigid-compliant Structured

Liu ChangDepartment of Mechanical & Electrical Engineering,

Hebei Agricultural University

48 33-020 2014-1476

Three Potato Harvester Comparative Experimental

Study on Working Performance and Analysis

Wang DongweiQingdao Agriculture

University institute of Electrical and Mechanical

engineering

49 33-021 2014-0975Experiments of Factors Affecting

Corn Grain Loss Rate on Two Types of Snapping Rolls

Sun XuefengSchool of Agricultural and

Food Engineering, Shandong University of Technology

50 33-022 2014-1614

Experiments of Chopped Power Consumption Performance on

Variable Feeding Angle Cutting Corn Stalks Device

Lu ShanwenSchool of Agricultural and

51 33-023 2014-0223Effect of straw chopped based on the different angle of corn

Harvesting

Li QijunShandong University of

TechnologyChina

52 33-024 2014-0852

Study on dynamical simulation of Hydraulic system for

Caragana harvester based on SIMULINK

Zhang XiuquanShanxi Agricultural

University, engineering institute

53 33-025 2014-1054

Experiment of Influencing Factors of Stalk Scatters and

Chopped Effect in Corn Vertical Cutting Device

Yin ChenghaiSchool of Agricultural and

54 33-026 0519-020Design and Experiment of Wheat Straw Cutting Reciprocating Test

Hou Jialin Mechanical and Electronic

Engineering College, Shandong Agriculture

University

55 33-027 2014-0126

Design and Flow Field Simulation ofThe Key

Components of Safflower Harvest Device

Ge YunDepartment of Mechanical and Electrical Engineering,

Shihezi University, Xinjiang, China

56 33-028 2014-0710Numerical simulation of internal flow field in centrifugal fan with

double outlet and multi-duct

Xu LizhangKey Laboratory of Modern

Agricultural Equipment and Technology, Ministry

of Education, Jiangsu University

57 33-029 2014-0758

Changes in Chemical, Biochemical and Aroma Volatile

Composition of Pomegranate Juice (cv. Wonderful) at

Different Maturity Stages and Agro-climatic Locations

Rebogile R. MphahlelePostharvest Technology

Research Laboratory, South African Research Chair in Postharvest Technology,

Department of Horticultural Sciences, Faculty of

AgriSciences, Stellenbosch University, Private Bag X1,

Stellenbosch 7602

South Africa

58 33-030 2014-0467Optimization of Parameters

for Sugarcane Lifter Based on Virtual Response Surface Test

Hu Jinbing,School of Biosystems Engineering and Food

Science, Zhejiang University

Topic (4) Automation Technology

59 34-001 0526-019The Detection System of The

Droplet Impact Force Based on PVDF Sensor

Zheng YongjunCollege of Engineering,

Mechatronic engineering, China Agricultural University

60 34-002 0618-057

Changes of the Color Distribution and Vegetation index according to Red Leaf

Lettuce’s Growth

Seongheon KimDepartment of Bio-Industrial

Machinery Engineering, Gyeongsang National

University, Jinju, Korea)

61 34-003 0618-061Crop and Weed Detection

Method by AOTF Hyper-spectral Imaging System

Mao WenhuaInstitute of Mechatronics

Technology and Application ,Chinese Academy of

Agricultural Mechanization Sciences, Beijing, China

62 34-004 0618-086

Study on New Returning Techniques of Wheat/Corn Straw

and Problem of Controlling Environmental Pollution

Zhang DaolinDepartment of Agricultural and

Food Engineering Shandong University of Technology

63 34-005 2014-0112

A Knowledge-based Application to Improve Transmission

System Design Automation for Agricultural Machines

Xiaoping JinCollege of Engineering,

64 34-006 0618-072

Development of a portable detector for determining nitrogen status of apple using active light

source

Zhang YaoKey Laboratory of Modern

Precision Agriculture System Integration Research, China

Agricultural University, Ministry of Education

65 34-007 2014-0122

Development of a Spraying System on UAV for Precision

Aerial Application

Yubin LanUSDA, ARS, USA

United States

67 34-009 2014-0188

Aquiculture Remote Monitoring and Control Equipment Based

on Automatic Cruise Boat

Meng XiangbaoGuangdong Institute of Modern

Agricultural EquipmentChina

68 34-010 2014-0213

Cost Efficient Surface Condition Determination System for Sugar Beets for a Harvester Cleaning

Control using an Industrial RGB Camera

Vadim TsukorUniversity of Applied Sciences

OsnabrueckGermany

69 34-011 2014-0231

Fruit and leaves detection method based on hyper-spectral

imaging

Mao WenhuaChinese Academy of

Agricultural Mechanization Sciences

70 34-012 2014-0239

Application for GNSS-navigation Technology in

Precision Agriculture

Zhang AoHaida satellite navigation technology co., LTD in

guangzhou

71 34-013 2014-0267

Communication Between ARM and DSP through SPI Bus

Yang FuzengNorthwest A&F University China

72 34-014 2014-0268

Design of a Greenhouse Remote Control Speed Electric Tractor

73 34-015 2014-0281

The Design and Simulation of A Novel Gripper for The Fruit

Picking Robot

74 34-016 2014-0282

The Hillside Tractor Positioning Technology Research Based on

Multi-sensor Information Fusion

75 34-017 2014-0304

A Three-Dimensional Nondestructive Detection

System for Plant Roots in Situ Based on Flat Panel Detector

Zhou XuechengSouth China Agricultural

UniversityChina

76 34-018 2014-0305

Development and Testing of A Small Remote Control Hillside

Tractor

77 34-019 2014-0399

Tube Stamp for Mechanical Intra-row Individual Plant Weed

Control

Frederik Langsenkamp,Faculty of Agricultural

Sciences and Landscape Architecture, University of

Applied Sciences Osnabrueck

Germany

78 34-020 2014-0412

Detection of Chlorophyll Content of Rice Leaves by Chlorophyll Fluorescence

Spectrum Based on PCA-MLP

Zhou LinaJilin University China

79 34-021 2014-0417

A Tillage Depth Monitoring System for Tillage Machine

Jia HongleiCollege of Biological and

Agricultural Engineering, Jilin University, Changchun, China

80 34-022 2014-0438

Design and Experiment of a Sowing Monitor Based on Fiber-

optic Sensors for Precision Planter

Luo Dalong,China Agricultural University China

81 34-023 2014-0441

Rapid Diagnosis of Tomato Nutrition Level Based on

Spectral and Image Information Fusion Technology

Liu HongyuInstitute of Agricultural

82 34-024 2014-0517

Actual Grain Flow Estimating Based on Process Neural

Networks

Wang HeShenyang Institute of

Automation Chinese Academy of Science, Shenyang 110016,

83 34-025 2014-0539

Experimental Study on Pneumatic Precision Seed-metering Device for Maize

Shi SongCollege of Engineering,

84 34-026 2014-0540

Motion Analysis and Simulation Optimization of Web Type

Wang FangyangCollege of Engineering,

China Agricultural University, Beijing 100083, China

85 34-027 2014-0562

Study Litchi Fruit Image Segmentation Methods and Algorithms: a Comparison

Liu TianhuCollege of Engineering, South China Agricultural University, Guangzhou, Guangdong, China

86 34-028 2014-0707

Sex Determination of Hatching Chicken Embryo by Hyperspectral Transmittance

Imaging

Hu Pengcheng China

87 34-029 2014-0750

The Analysis of Soil Temperature Sensor’s Measure Technology

and a New Design of Assemble sensor

Zhang XinBeijing Research Center

for Intelligent Agricultural Equipment, Beijing, China

88 34-030 2014-0817

Development of Automatic Aquatic Plant Cleaning Ship

Control System

Liu HuiguiSchool of Electrical and

Information Engineering , Jiangsu University

89 34-031 2014-0900

Simulation and Experimental Verification of Air Spraying Drift

on N-3 UAV

Zhang SongchaoNanjing Research Institute for Agricultural Mechanization,

Ministry of Agriculture

90 34-032 2014-0936

Development and Experimental Study on Spraying Device for

Stellera

Zhao JianzhuThe College of Engineering of China Agricultural University

91 34-033 2014-0990

Effects of UAV flying heights on the accuracy of field plot

mapping

CHAN CHEE WAN,Mechanisation and Automation

Research CenterMalaysia

92 34-034 2014-1032

Design of a GNSS Land Levelling Equipment

Bao HanBeijing Research Center for Information Technology in

Agriculture

93 34-035 2014-1200

Grain Flow Signal Reduction Noise Using EMD

Wang HeShenyang Institute of

Automation Chinese Academy of Science

94 34-036 2014-1397

Design and Testing of the Control System of the Seedling Precision Seeder in Rice Paddy

Kuang JianxiaCollege of Engineering, South China Agricultural University

95 34-037 2014-1513

Performance Experiment for Grain Separation Losses

Monitoring Sensor

Liang ZhenweiKey Laboratory of Modern

Agricultural Equipment and Technology, Ministry of Education and Jiangsu

96 34-038 2014-1532

Development of a Portable Water Turbidity/Transparency Detector

Based on NIR Spectroscopy

Zheng LihuaKey Laboratory of Modern

Precision Agriculture System Integration Research,

97 34-039 2014-1608

Multispectral induced fluorescence versus spectral

reflectance for determining the winter wheat Nitrogen deficit

Jana GalambosovaDepartment of Machines and

Production Systems, Faculty of Engineering, Slovak University

of Agriculture in Nitra

Slovakia

98 34-040 2014-0667

Simulating and Experimental Analysis on Multi-directional

Valve of Heavy Tractor Electro-hydraulic Hitch

Jianjun ZhaoCollege of Engineering,

99 34-041 0825-026The development of gateway note used in intelligent field

information

Yao WenKey Laboratory of Modern

100 34-042 2014-0809

Automatic Classification of Seedling Quality Based on

Adaptive Clustering Algorithm

Yu HaiyeKey Laboratory of Bionic

Engineering, Ministry of Education, School of

Biological and Agricultural Engineering, Jilin University

101 34-043 0825-027Dynamic Modeling of the

Leveling System of Paddy Field Laser Leveler

Zhao ZuoxiSouth China Agricultural

UniversityChina

102 34-044 0825-028

A Matlab-based Hardware-in-the-loop Platform for BUG

Algorithm Simulation and Testing

Zhao Zuoxi,South China Agricultural

UniversityChina

103 34-045 0825-029Development of yield

measurement model based on IPC of grain combine

Li XinchengKey Laboratory of Modern

104 34-046 0825-030Determination of Nitrogen

in Soil Using Laser-Induced Breakdown Spectroscopy

Zhang JunningNational Key Laboratory of Soil-Plant-Machine System

105 34-047 0825-031Development of control system

for cottonseed delinting machine based on virtual instrument

Limming ZhouChinese Academy of

106 34-048 0825-032Development of a soil electrical conductivity detection system

based on ARM

Pei XiaoshuaiKey Laboratory of Modern

107 34-049 0825-033Online Detection Welding

Quality of Threshing Drum in Rice and Wheat Harvester

Yao RongChinese Academy of

108 34-050 0825-034Study on Power Matching

Control of Hydraulic Sugarcane Harvester

Gao YingjieHebei Key Laboratory of

Heavy Machinery Fluid Power Transmission and Control,

Yanshan University

109 34-051 0825-035Design of Hydraulic System for Whole Stalk Sugarcane

Harvester

Gao YingjieHebei Key Laboratory of

Heavy Machinery Fluid Power Transmission and Control,

Yanshan University

110 34-052 0825-036

Unmanned Aerial Vehicle-based remote sensing system for soybean high-throughput

phenotyping

Liujun Li China

111 34-053 0825-037

Using Interception of Photosynthetically Active

Radiation to Assess Dormant Pruning Severity in A Planar

Sweet Cherry Orchard

Jingjin ZhangCenter for Precision and Automated Agricultural

Systems, Washington State University

United States

112 34-054 0825-038A novel method for measuring the volume and surface area of

Zhang WeizhengCollege of Biosystems

Engineering and Food Science, Zhejiang University

113 34-055 0825-039Design and Research of a Movable Soil Information

Platform

Ma YangCollege of Mechanical and

Electronic Engineering, Northwest A&F University

114 34-056 0825-040Navigation control algorithm

research about transplanter based on the feedback linearization

Bai XiapingKey laboratory of Industrial

Informatics, Shenyang Institute of Automation Chinese Academy of Sciences

115 34-057 0825-041Development of LIDAR based

Autonomous Navigation System for Combine Harvester

Zhao TengVehicle Robotics Laboratory,

Graduate School of Agriculture, Hokkaido

University

116 34-058 0526-024 Modeling of Heat Pump Assisted Heating-Drying System

Erkan DİKMENDept. of Energy Systems

Engineering, Fac. of Technology, Süleyman Demirel

117 34-059 2014-0649

An instrument for determination of pesticide residues based on acetylcholinesterase biosensor

Guo ZhaoShandong University of

TechnologyChina

POSTER SESSIONS

13:30-17:30

Topic (2) Cultivating Agricultural Machinery, it includes the major of tillage, sowing, transplanting and plant protection

1 32-001 0509-014

Problem and Countermeasure Discussion of Mechanized Farming of Main Double

Cropping Grain Crop

Liu JiyuanShandong Academy of Agricultural Machinery

Sciences

Belgium

2 32-002 0509-023 Analysis of Mower Knife Wear Based on Reverse Engineering

Fu ZuoliChina Agricultural University China

3 32-003 0509-036

Study on Straw Movement in Straw-soil-rotary Blade System

with Simulation Based on Distinct Element Method

Fang HuiminDepartment of Engineering,

4 32-004 0509-042A Study on the Dynamic

Stability of Full Type Single Section Scissor Lift

Zhang WeiAirport College, Civil

Aviation University of ChinaChina

5 32-005 0509-050Volatilization and Coverage Study of Spray Liquid on

Different Property Crop Surfaces

Li HuiCollege of Engineering, China

Agricultural UniversityBelgium

6 32-006 0514-004

Effects of Different Type and Structural Parameters' Subsoiling

Shovels on Soil Physical Characteristic in China Northeast

Liu JunanCollege of Engineering, China

7 32-007 0514-005

Effects of Different Subsoiling Shovels on Soil Physical

Characteristic in China Northeast Area

Liu JunanCollege of Engineering, China

8 32-008 0514-006Study on the Multi-plate’s

Vibration System of the Needle Plug Tray Planter

Du RenMechanical Engineering Department, North China

Institute of Airspace Engineering

9 32-009 0526-009Performance Values of a Disk Chipper During Working with Pomegranate Pruning Residues

Mete YigitAkdeniz University Faculty of Agriculture Department of Agricultural Machinery

Antalya

Turkey

10 32-010 2014-0067

Design on 2MBYZ-3/6 Self-propelled Mulch Precision

Seeder with Corn Seed Production

Liu LijingChinese Academy of

Agriculture Mechanization Sciences, Beijing, China

11 32-011 2014-00683D Reverse Engineering Study of Seed Tube Based on Geomagic

Liu LijingChinese Academy of

Agriculture Mechanization Sciences, Beijing, China

12 32-012 2014-0087Design and Experiment on Rot Quickly Deep Buried by The

Returning Device of Rice Stalk

Ge YiyuanCollege of Mechanical

Engineering, Jamusi University, Jamusi,

13 32-013 2014-0093Optimizing The Performance of Granular Fertilizer Spreader with

Cone Disk

Dong XiangqianCollege of Engineering,

14 32-014 2014-0094Research and Development on Vibration Spacing Scarifier for

Meadow

Dong XiangqianCollege of Engineering,

15 32-015 2014-0106Experimental Analysis and Research on Key Parts of

Removing Solid Ice and Snow

Li YaqinBiological and Agricultural

Engineering, Jilin University,Changchun,China

16 32-016 2014-0108Analysis on Formation Process

and Failure Mechanism of Compacted Snow

Li YaqinCollege of Mechanical Engineering, Jamusi

University, Jamusi, China

17 32-017 2014-0116 Advance Research of Tray Precision Sowing Equipment

Zhao ZhengbinModern Agricultural Equipment co., Ltd

18 32-018 2014-0125The Performance Detection of

Tray Precision Seeder Based on Machine Vision Technology

Zhao ZhengbinModern Agricultural

Equipment co., Ltd，Beijing 100083，China

19 32-019 2014-0154Experimental study on the filling performance of maize bowl-tray

precision seeder

Mao XinEngineering College,

Heilongjiang Bayi Agricultural University, Daqing 163319, China

20 32-020 2014-0157 Design and Test of The Device From Apple Seedling Root Soil

Li JianpingAgricultural University of

HebeiChina

21 32-021 2014-0163

Simulation and Experimental Study on Pulverizer Performance of Reversal Rotary Tiller Based

on Discrete Element Method

Xie ZhenfengJiangsu University China

22 32-022 2014-0208

Research Progress of Mechanized Strip Compound Planting System of Wheat-

maize-soybean

Wu WeixiongSouth China Agricultural

UniversityChina

23 32-023 2014-0225Fault Characteristics Analysis

of 2BFQ-6 Precision Planter for Rapeseed

Liao YitaoHuazhong Agricultural

UniversityChina

24 32-024 2014-0234Use of A Specifically Designed Information System to Manage

Agricultural Plastic Waste Fluxes

Evelia SchettiniUniversity of Bari Italy

25 32-025 2014-0237

Effects of Integrated Use of Organic Manure and Chemical Fertilizer on Yield, Quality of Tea and Soil Nutrient Content

Li PingpingJiangsu University China

26 32-026 2014-0238Carrot Cultivation and Situation of Mechanization Technology in

China and Abroad

Li KaifengChinese Academy of

Agricultural Mechanization Sciences Beijing, 100083,

27 32-027 2014-0328 Advanced Design of No-tillage Hill Seeder

Lin YuexiangQingdao Agricultural

UniversityChina

28 32-028 2014-0329

Design and Experiment of Combing Plate and Push Rod Combined Pneumatic Seed Metering Device for Rice

Zhai JianboHuazhong Agricultural

UniversityChina

29 32-029 2014-0360Parameters Study of Aluminum Alloy Roller Barrel by Friction

Stir Welding

Feng TiantaoShandong Agriculture

UniversityChina

30 32-030 2014-0416Design and Experiment on

Friction Wheel Transmission for No-till Planter

Jia HongleiJilin University China

31 32-031 2014-0419 Development of Lifting Platform for Orchards in Hill Area

Fan GuijuCollege of Mechanical and Electrical Engineering，Shandong Agricultural

University, Tai’an 271018, China

32 32-032 2014-0422

Agricultural Mechanical Components Research Based on Materials of Integrated Bionic

on Animal Scales

Qu WenjingJilin University China

Gear-tooth Rootstalk Cutting Mechanism of No-tillage Seeder

Jiang XinmingCollege of Biological and Agricultural Engineering,

Jilin University, Changchun 130022, China

34 32-034 2014-0424Theoretical Analysis and

Experimental Research on Elastic Press Wheel

35 32-035 2014-0427 Effect of Subsoiling on Soil Water Content

Jia ZhuoJilin University China

36 32-036 2014-0431Orthogonal Experiment of Loss Sowing Alarm System Based on

Capacitive Sensor

Qi JiangtaoKey Laboratory of Bionic Engineering (Ministry of

Education), Jilin University, 130022 China

37 32-037 2014-0432 Optimization and Test of the Profiling Elastic Press Roller

38 32-038 2014-0433 Experiment Research on FSB-1900 Pickup Baler

39 32-039 2014-0434

Experiment on Working Performance of Variable Rate

Fertilizer and Subsoiling Machine

Jia HongleiKey Laboratory of Bionic Engineering, Ministry of

Education, Jilin University

40 32-040 2014-0435

A Study on Soybean Mechanical Precision Seedmeter in China Based on Analysis of Soybean Precision Seeding in the United

States

41 32-041 2014-0440

Optimization Design and Experiment of Seed Eliminator

in A Centralized Pneumatic Metering Device for Maize

Qi BingChina Agricultural University, China

42 32-042 2014-0442Effect of Curing Time in Field

on Moisture Content and Mechanical Strength

Guan MengShenyang Agricultural

UniversityChina

43 32-043 2014-0450

Effects of Structural Parameters of Seed Tube and Working

Parameters of A Centralized Drum Planter on The Uniformity

of Seed Distribution

Yang LiCollege of Engineering, China

44 32-044 2014-0462Design and Experiment of

Combined Disc Air-assisted Orchard Sprayer

Zhou LiangfuNanjing Research Institute for Agricultural Mechanization

Ministry of Agriculture

45 32-045 2014-0489Design and Experimental

Research on the Film-covered-fertilizer transplater

Chi MingluCollege of Mechanical and

Electrical Engineering, Inner Mongolia Agricultural

University

46 32-046 2014-0493

Study and Experiment on Structure of Metering Hole of

Centralized Centrifugal Precision Metering Device for Rapeseed

Cao XiuyingHuazhong Agricultural

UniversityChina

47 32-047 2014-0496

Design and Experiment on Roots-soil Separating

Mechanism of Fibrous Root Crops

Wu TaoCollege of Engineering, South China Agricultural University

48 32-048 2014-0518

Structural Analysis and Experiment of A Transplanter

for Corn Seedlings Growing in Paper-tubes

Yang LiCollege of Engineering,

China Agricultural University, Beijing China

49 32-049 2014-0521

Design and Experiment of An Automated System for

Transplanting Potato Tissue Culture Seedlings

Yang LiCollege of Engineering,

China Agricultural University, Beijing China

50 32-050 2014-0527Design and Finite Element Analysis of A Wheel of The

Wheel Wake

Wang JunyueHohhot Branch of Chinese Agricultural Mechanization

Sciences, Hohhot, China

51 32-051 2014-0529The development of the small rotary electric ditching testing

machine

Zhou YangKey Laboratory of Key

Technology on Agricultural Machine and Equipment,

Ministry of Education, South China Agricultural University

52 32-052 2014-0537

Experimental Study on Characteristics of Plant

Morphological Parameters about Different Rape Varieties for

Transplanting

Liu MingfengCollege of Engineering, Huazhong Agricultural

University

53 32-053 2014-0590Non-Destructive Measurement

of Rice Biomass and a Prediction Model

Liu CuihongCollege of Engineering, Shenyang Agricultural

University

54 32-054 2014-0630Design and Experiment of 1KY-40 Hydraulic Drive Ditcher For

Farmland Conduit

Wu GuangweiNational Research Center

of Intelligent Equipment for Agriculture

55 32-055 2014-0638

Anti-attachment Function of Slippery Zones in Nepenthes Pitchers and Its Application in Biomimetic Developing

Agricultural Pest Trapping Plate

Wang LixinHebei University of Science

and TechnologyChina

56 32-056 2014-0658Development of A Dry Land

Automatic Transplanter for Plug Seedlings

Cui Wei China

57 32-057 2014-0661

Optimal Design and Simulation Analysis on a Sowing Depth

Control Unit for Corn Precision Planter

Zhang RuiChina Agricultural University China

58 32-058 2014-0665

Study on Seedling Seperation Device of Artemisia Arborescens Transplanter Based on Vibration

Mechanism

Ji WenfengHuazhong Agricultural

UniversityChina

59 32-059 2014-0677Research method on the

interaction between soil and tillage components

Ma XingShenyang Agricultural

UniversityChina

60 32-060 2014-0690Experimental Study on The

Characteristics of Solar Drying Bale

Du JianqiangChinese Academy of

61 32-061 2014-0727Proposed Installation of A

Agroindustries Drying of Pink Pepper (Aroeira)

Ricardo Oliano de CarvalhoAgricultural Engineer, Federal

University of PelotasBrazil

62 32-062 2014-0728

Economic Feasibility of Strawberry Production in Semi-

hydroponic System and Agro Industry of Jelly on A Small

Propriety

63 32-063 2014-0729 Hydroponic Lettuce Minimally Processed Production

64 32-064 2014-0749Design of Scooping Plastic

Film Mulch Planter and Seeding Performance Test of Cotton

Liu FeiCollege Of Mechanical And Electrical Engineering,Inner

Mongolia Agricultural University

65 32-065 2014-0755Experimental Study of Inside-filling Air-blowing Precision

Seed Metering Device for Maize

China Agricultural University China

66 32-066 2014-0766Combined Driving System

Design for Ultra Low Speed Working of Orchard Ditcher

Chai LifaCollege of Mechanical and

Electrical Engineering, Agricultural University of

67 32-067 2014-0828 The CFD Simulation of Droplet Trajectory in Greenhouse

Wang JingxuDepartment of Engineering,

China Agricultural UniversityChina

68 32-068 2014-0845

Analysis of Causes on Growth Duration Prolonged with Machine Transplanting in

Double Cropping Late Rice

Shu ShifuInstitute of Agricultural

Engineering, Jiangxi Academy of Agricultural Sciences

69 32-069 2014-0884 Experimental Study on Material Characteristics of Rice Bud Seed

Zhang Shun,College of Engineering,

Huazhong Agricultural UniversityChina

70 32-070 2014-0910Status of Agricultural

Mechanization in Southwestern China : a Case

Chen JianCollege of Engineering

and Technology, Southwest University

71 32-071 2014-0913

Research on Movement and Simulation Platform of Wine Grape Vibration-separation

Mechanism

Yuan PanpanCollege of Mechanical and

Electrical Engineering, SHIHEZI University, Shihezi,

72 32-072 2014-0929 Study on Technology Integration for Corn Seed Scale Processing

Li YongleiInstitute of Agricultural

Products Processing Engineering, Chinese Academy

of Agricultural Engineering

73 32-073 2014-0932 Simulation of straw movement by the Distinct Element Method

Fang HuiminDepartment of Engineering,

74 32-074 2014-0943 Design and Test of Alfalfa Flattening Test Bench

Zhao JianzhuCollege of Engineering, China

75 32-075 2014-0945

Air Flow Field Analyse and Dynamic Research on Seeds Pick-up Process for A Level-

sucker Precision Seeder

Liu CailingCollege of Engineering, China

Agrilcutral UniversityChina

76 32-076 2014-0986Design and Study on Metering

Device of Pneumatic Grass Seeder

Zhai GaixiaHohhot Branch of Chinese Academy of Agricultural Mechanization Sciences

77 32-077 2014-0988Effects of the Tillage Systems in Wheat Cultivation on Soil CO2

Emission

Zeliha Bereket BARUTÇukurova University,

Faculty of Agriculture, Department of Agricultural

Machinery

Turkey

78 32-078 2014-1017Effects of Tillage Systems on

Energy Use for Wheat-Soybean rotation in Southern Turkey

Zeliha Bereket BARUTCukurova University, Faculty of Agriculture, Department of

Agricultural Machinery

Turkey

79 32-079 2014-1029

Stability and Reliability Analysis of Valve Controlled Hydraulic

Motor Power System for Flexible Chassis for Pesticide

Sprayer

Zhang HuaCollege of Mechanical and

Electronic Engineering, Nanjing Forestry University

80 32-080 2014-1036Design and Experiment of No-till Wheat Seeder under Controlled

Traffic Farming System

Wang QingjieCollege of Engineer; China

81 32-081 2014-1113Effect of Moisture Content on Molding of Vegetable Nutrient

Nursery Block

Song YuqiuCollege of Engineering, Shenyang Agricultural

University

82 32-082 2014-1144Prespects of Creating a

Biopesticide Based on Bacillus Bacteria and Plant Extracts

Olga ShemshuraInstitute of Microbiology

and Virology, Committee of Science, Ministry of Science

and Education

Russia

83 32-083 2014-1172Design and Experiment of

Precision Suction Plate Metering Device for Super Hybrid Rice

Hu JianpingKey Laboratory of Modern Agricultural Equipment and

Technology, Ministry of Education&Jiangsu Province,

Jiangsu University

84 32-084 2014-1199Modal Analysis and Test of

Returning Machine Knife Roll Based on Pro/E and ABAQUS

Ge YiyuanCollege of Mechanical

Engineering,Jamusi University

85 32-085 2014-1201

Construction of Dynamic Ion Flux Detecting Device in Plants

Based on 3D Micro-imaging Method

Hou PeichenBeijing Research Center for Information Technology in

Agriculture

86 32-086 2014-1213The Design and Experimental Study of Self-driven Stubble

Ploughing Machine

Hu JunDepartment of

Engineering,Heilongjiang BA YI Agricultural University

87 32-087 2014-1214 Finite Element Analysis and Improvement of Subsoiler

Hu JunDepartment of

Engineering,Heilongjiang BA YI Agricultural University

88 32-088 2014-1243 Study on Crank Rocker Type Plastic Film Collecting Machine

Hou ShulinCollege of Engineer,China

89 32-089 2014-1279

Mechanism Analysis and Motion Simulation of Vegetable

Transplanter with Planetary Bevel Gear Train

Wang Yongwei,School of Biosystems Engineering and Food

90 32-090 2014-1340Research on the Microstructure

and Properties of Laser Cladding SiC/Ni Coating

Xu YangCollege of Engineer; China

91 32-091 2014-1379

The Research of Common Mountain Orchard Transport Test System Construction on

Experiment Platform

Li ShanjunCollege of Engineering, Huazhong Agricultural

University

92 32-092 2014-1441

Design and Testing of 2BFD-2 type Peanut Planter Combined

with Laying Drip Irrigation Pipe and Plastic Mulch

Wang RuiliCollege of Engineering, Shenyang Agricultural

University, Liaoning, China

93 32-093 2014-1471The Progress and Key Technical

Analysis of Corn No-tillage Planter

Lin Jingcollege of engineering, Shenyang agricultural

university

94 32-094 2014-1504

The Experimental Research and Analysis of the Seed- Meter

Device of the Precision Spaced Planter for Corn

Wang DongweiMenoble co.ltd, Beijing China

95 32-095 2014-1536

Flow Field Simulation Analysis of Side Positive Pressure

Seeding Mechanism and Study on Working Parameters

Zhang DongxingCollege of Engineering, China

96 32-096 2014-1603 Straw Returning Rotary Tiller for Wet Land and Dry Land

Zhang JuminCollege of Engineering, Huazhong Agricultural

University

97 32-097 2014-0933

Application of Reaction Nitrogen Arc Cladding TiCN/Fe Metal

Ceramic Composite Coating for Cutter of Agricultural Machinery

Li JianchangDepartment of Mechanical and Electrical Engineering, Agricultural University of

98 32-098 2014-1140

Study on the Interactions of Spring-Tooth and Plastic

Films Based on Physical and Mechanical Properties of plastic

Xie JianhuaChina Agricultural University China

99 32-099 2014-0235Design and optimization of straw-cleaning blade of no-

tillage seeder

Wu GuangweiNortheast Agricultural

UniversityChina

100 32-100 0526-011Wear resistance of ion

implanting tungsten carbide on 65Mn steel used as harrow disk

Yang HaiCollege of mechanical

and electrical engineering, Northeast Forestry University

101 32-101 0526-027

Application Status and Development Prospects of Effective Plant Protection

Machinery

Zhou HaiyanModern Agricultural Equipment CO.LTD

102 32-102 2014-0376Innovative Design and

Experimental Research on Self-suction Jet Aerator

Chen JiannengZhejiang Sci-Tech University China

103 32-103 2014-0472Motion Analysis and Simulation

Optimization of Rod Type Conveyor Based on Adams

Wang FangyanQingdao Agricultural

UniversityChina

104 32-104 2014-0505

Studied on the Automatically Catching Mechanism of

Potted-seedling for Vegetables Transplanter

Yang ChuanhuaChinese Academy of

105 32-105 2014-0701

Based on Pro/E and ANSYS Workbench improvement after the deep loose plough shovel

force analysis

Wang ZiyangJiamusi University China

106 32-106 2014-0952Experimental study on mixing

performance of jet-mixing apparatus

Qiu BaijingInstitute of Agricultural

107 32-107 2014-0693

Comparison Study of Application Effect on Three Rice Transplanters in Double

Cropping Rice Area

Xiao LipingJiangxi Agricultural

UniversityChina

108 32-108 2014-1438Experimental study on the

performance of different forms of seed corn seed

Sun ShimingHeilongjiang Provincial Academy of Agricultural Machinery Engineering

Science

109 32-109 2014-0339Research on tensile mechanical

properties of the greenhouse cucumber cane

Xu YunfengKey Laboratory of Modern

Agricultural Equipment and Technology, Ministry of Education and Jiangsu

Province，Institute of Agricultural Engineering ,

Jiangsu University

SESSION IV

ENERGY IN AGRICULTURE

Monday, Sept. 15 08:00-20:00

Registration Location:the open place on the 1st floor near the Delegates

Access Gate C2, CNCC

Tuesday, Sept. 16

10:00-10:10 Tea Break

13:30-15:00 Technical Presentation Location: 308,CNCC

15:00-15:15 Tea Break

15:15-17:15 Technical Presentation Location: 308,CNCC

Wednesday, Sept. 17

Sub-session I Location: 405,CNCC

Sub-session II Location: 406,CNCC

10:00-10:15 Tea Break

15:00-15:15 Tea Break

19:30-21:30 Chinese Cultural Night Location:Beijing Performance & Arts Centre

Thursday, Sept. 18

10:00-10:15 Tea Break

Overview of Session IV: Energy in Agriculture

OPENING CEREMONY OF SESSION IV

ENERGY IN AGRICULTURE

ORAL PRESENTATIONS

SEPTEMBER 16, 2014

TUESDAY AFTERNOON

13:30-17:15Location: Room 308, the 3rd Floor of CNCCChair: Prof. Axel Munack, Professor of Thuenen Institute of Agricultural, Germany

15:00-15:15 Tea BreakLocation: Room 308, the 3rd Floor of CNCCChair: Prof. Shulin Chen,

13:30-14:00 0826-401

Nutrient recovery for a new generation of anaerobic digestion technologies Dr. Shulin ChenProfessor of Department of Biological Systems Engineering, Department of Biological Systems Engineering Washington State University, USA

14:00-14:30 0826-403The potential economical competitiveness of diatom based Bio-Crude Dr. Jawkai WangPresident of Jawkai Bioengineering R&D Center, USA

14:30-15:00 0826-402Carbon capture and sequestration-A technology who's time has come? Prof. Bill A. StoutHonorary President of CIGR, USA

15:15-15:45 0826-404Renewable energies in agricultureProf. Axel MunackProfessor of Thuenen Institute of Agricultural, Germany

15:45-16:15 0826-405

Development of RCD protection technology of rural power network in ChinaProf. Songhuai DuDeputy-dean of Information and Electrical Engineering College, China Agricultural University, China

Professor of Department of Biological Systems Engineering, Department of Biological Systems Engineering, Washington State University, USA

SEPTEMBER 17, 2014

WEDNESDAY MORNING

08:30-11:30Session No. 1

Location: Room 405, the 4th Floor of CNCCChair: Prof. Guangnan Chen,

08:30-08:45 2014-0846

Microwave-assisted decarboxylation and cyclization of potassium stearate with magnalium hydrotalcite catalysts and renewable hydrocarbon fuel production Yuhuan Liu, Yingyu Liu, Yunpu Wang, Yingkuan Wang, Rongsheng RuanNanchang University, China

08:45-09:00 2014-0568

A review on the application of near-infrared spectroscopy to crop straw analysis Zengling Yang, Junjie Xue, Lujia HanChina Agricultural University, China

09:00-09:15 2014-0243

A solar absorption cooling system for greenhouse climate control: technical evaluationGiuliano VoxUniversity of Bari, Italy

09:15-09:30 2014-0252The structure changing of caragana microphyllain BiomassZebing XingShanxi Agriculture University, China

09:30-09:45 2014-0576

Effects of preheating temperature on the compacting characteristics of the pellets made from corn stalk powderXuewei Bai, Juan Liu, Yongkui LiShenyang Agricultural University, China

16:15-16:45 0826-406Green packaging materialsProf. Radhey LAL. Kushwaha, University of Saskatchewan, Canada

16:45-17:15 0826-407

The developing trend and application analysis of the stand-alone wind generatorProf. Qingzhi ZhaiDeputy Director of Electrical and Information Experiment Teaching Centre, China Agricultural University, China

Professor of National Centre for Engineering in Agriculture, University of Southern Queensland, Australia

10:00-10:15 Tea Break

Location: Room 405, the 4th Floor of CNCCChair: Prof. Giuliano Vox,

10:15-10:30 2014-0860

Process conditions optimization of soybean wastewater treatment and biomass recovery by yeastHaifeng LuChina Agricultural University, China

10:30-10:45 2014-0560

Application of tobacco stems briquetting in flue-cured tobacco: a case of China rural placeXinfeng Wang, Guichuan Xu, Bailiang Zhang, Yaosong Guan, Haifeng Lu, Baoming LiChina Agricultural University, China

10:45-11:00 2014-0071Benchmarking energy use in agriculture Prof. Guangnan ChenUniversity of Southern Queensland, Australia

11:00-11:15 2014-0174

Estimation of gross calorific value of rice straw from proximate and ultimate analysis using artificial neural Shaoping QianZhejiang University, China

11:15-11:30 2014-0552energy efficient rural food processing utilising enewable energy to improve livelihoodsAndrew Kallon

08:30-08:45 2014-1227

A novel three layers micro-grid cluster control system based on IEC61850 communication system Zhiyuan Sun, Tianjun Jing, Jiangbo Wang, Haijiang DuCollege of Information and Electrical engineering, China Agricultural University, China

08:45-09:00 2014-1014

Load curve analysis based on fuzzy clustering and fuzzy pattern recognition Bilin XiaoCollege of Information and Electrical Engineering, China Agricultural University, China

Session No. 2

Location: Room 406, the 4th Floor of CNCC Chair: Prof. Songhuai Du, Deputy-dean of Information and Electrical Engineering College,

China Agricultural University, China

Professor of Department of Agricultural and Environmental Science, Italy

10:00-10:15 Tea Break

Location: Room 406, the 4th Floor of CNCCChair: Prof. Wei Tang,

10:15-10:30 2014-1631

Effects of icing on aerodynamic performance of wind turbine blade by wind tunnel test and numerical simulationYan Li, Shaolong Wang, Jing Tang, Qindong Liu, Fang Feng Engineering College, Energy engineering, Northeast Agricultural University, China

10:45-11:00 2014-0323The off grid application of Chinese small wind generators Prof. Dechang ShengChinese Wind Energy Equipment Association, China

11:00-11:15 2014-1374

Research on solar energy absorption characteristics and optical mechanism of several kinds of butterfly Liyan WuShenyang Agricultural University, China

11:15-11:30 2014-1636Study on The Law of Flooding and Releasing Heat of Solar Heat Pipe Filled with Phase Change Materials (PCMs) in GreenhouseYong Wu

09:00-09:15 2014-1224

Based on state feedback and parameter self-tuning battery SOC algorithm researchZhi Wang, Yunfeng Tang, Jinfang HuCollege of Information and Electrical engineering, China Agricultural University, China

09:15-09:30 2014-1274

The optimal allocation of distribution generations in micro-grid based on the economic and environmental evaluationDechang Yang, Cong Wu, Xin MaCollege of Information and Electrical Engineering, China Agricultural University, China

09:30-09:45 2014-0647

Flow field simulation and structure optimization of concentrated wind energy turbineDe Tian, Xiaoe Mao, Ying Deng, Bochao Sang, Junjie LinNorth China Electric Power University, China

09:45-10:00 2014-1510

Transformation a biogas mixture into biomethane by the absorption tower of CO2 Shimizu NaotoHokkaido University, Japan

Professor of College of Information and Electrical Engineering, China Agricultural University, China

SEPTEMBER 17, 2014

WEDNESDAY AFTERNOON

13:30-16:30

Session No. 1

Location: Room 405, the 4th Floor of CNCCChair: Mustafa A. M., Zhejiang University, China

13:30-13:45 0618-078

Renewable energy effect on sustainable development of the food industry Gerasimos MartzopoulosAristotle University of Thessaloniki, Greece

13:45-14:00 2014-1132

Experiment on influencing factors of cutting performance of cotton stalk cutting knifeZhanhua Song, Fade LiShandong Agricultural University, China

14:00-14:15 2014-0072Alternative energy sources for cotton production in AustraliaGuangnan Chen, University of Southern Queensland, Australia

14:15-14:30 0509-010

Evaluation of the vulnerability and economic feasibility of electric vehicle charging infrastructures based on gas stations in Korean rural areasSolhee KimSeoul National University, Korea

14:30-14:45 2014-0853

Study on analysis methods for fermentable sugar in sweet sorghum stalksGuifang Fan, Yan Jiang, Weiliang Xu, Peipei Li, Shizhong Li Tsinghua University, China

15:00-15:15 Tea Break

Location: Room 405, the 4th Floor of CNCCChair: Guifang Fan, Engineer of Tsinghua University, China

15:15-15:30 2014-0447

Fungal pretreatment of rice straw for enhancing biogas production from solid-state anaerobic digestionMustafa A. M., Kuichuan ShengZhejiang University, China

Session No. 2

Location: Room 406, the 4th Floor of CNCCChair: Cengiz Akdeniz,

15:30-15:45 2014-0804Effects of trace metal elements on dry anaerobic fermentation of corn stalkLing ZhaoShenyang Agricultural University, China

15:45-16:00 2014-1585

Performance analysis of a solar thermal heat pump system for biogas digester heating Huixian Shi, Xingjian SunModern Agricultural Science and Engineering Institute, Tongji University, China

16:00-16:15 2014-0221Biocatalysts in biogas processes for higher resource and energy efficiency Ulrike Schimpf, Ronald Schulz, Alexander SchraderInstitute of Agricultural and Urban Ecological, Germany

16:15-16:30 2014-0341Development of biodegradable biomass board using rice stalkXiulun Wang, Jin Zhang, Koji Kito, Takaaki SuzukiMie University, Japan

13:30-13:45 2014-0047

Alcohols as a means to inhibit the formation of precipitates in blends of biodiesel and fossil diesel fuel Axel MunackThünen Institute of Agricultural Technology, Braunschweig, Germany

13:45-14:00 2014-1142Advances in comprehensive utilization of algae residuesSha Li, Guochen Zhang, Xiuchen LiDalian Ocean University, Chian

14:00-14:15 0514-013

Biodiesel production from waste cooking oil in Mongolian conditionBolor-ErdeneMaster student School of Engineering, Mongolian State University of Agriculture, Mongolia

14:15-14:30 2014-0760

Conversion of enteromorpha prolifera to bio-crude oil through hydrothermal liquefactionJianwen LuLaboratory of Environment-Enhancing Energy (E2E), College of Water Resources and Civil Engineering China Agricultural University, China

14:30-14:45 2014-0780

Biochemical analysis of university kitchen waste and its potential for sustainable bio-crude oil conversion through hydrothermal liquefactionZhi QuLaboratory of Environment-Enhancing Energy(E2E), College of Water Resources and Civil Engineering China Agricultural University, China

Department of Agricultural Machinery, Faculty of Agriculture, EGE University, Turkey

15:00-15:15 Tea Break

Location: Room 406, the 4th Floor of CNCCChair: Prof. Axel Munack, Professor of Thuenen Institute of Agricultural, Germany

15:15-15:30 2014-0867

Harvesting reducing sugars and organic acids from xylan and cellulose through hydrothermal liquefactionZhangbing ZhuLaboratory of Environment-Enhancing Energy (E2E), and Key Laboratory of Agricultural Engineering in Structure and Environment, Ministry of Agriculture, College of Water Resources and Civil Engineering, China Agricultural University

15:30-15:45 2014-1136

Detection in situ of pigments in microalgae using Vis/NIR spectroscopy and chemometricsPan JianCollege of Biosystems Engineering and Food Science, Zhejiang University, China

15:45-16:00 0512-004

The effect of die dimension and die speed on olive cake pelletizing Cengiz AkdenizDepartment of Agricultural Machinery, Faculty of Agriculture, EGE University, Turkey

16:00-16:15 2014-0671A research on briquetting of greenhouse pepper crop residuesSefai Bilgin, Hasan YILMAZ, Abdülkadir KOÇERFaculty of Agriculture, University of Akdeniz, Turkey

SEPTEMBER 18, 2014

THURSDAY MORNING

08:30-11:45Location: Room 405, the 4th Floor of CNCCChair: Haifeng Lu, China Agricultural University, China

08:30-08:45 2014-1428Design of agitating charring kiln for biomass Baofeng Zhang, Mingjin Xin, Wentao Ren, Jun MengCollege of Engineering Shenyang Agricultural University, China

08:45-09:00 2014-0107Design and experiment of integration grinder with draw out the device Mingyou WangNanjing Agricultural Machinery Research Institute, China

09:00-09:15 2014-0589

Design of domestic photovoltaic cell tracking device and its application in electric heating systemLidi WangShenyang Agricultural University, China

10:00-10:15 Tea Break

Location: Room 405, the 4th Floor of CNCCChair: Prof. Dechang Sheng,

10:15-10:30 2014-0862

Natural light-microaerobic condition for PSB wastewater treatment and biomass resource recovery technologyHaifeng LuCollege of Water Resource and Civil Engineering, China Agriculture University, China

10:30-10:45 2014-1350

Carbon-rich substrates for boosting manure-biogas: a consequential life cycle assessmentLorie Hamelin, Irina Naroznova, HenrikDepartment of Chemical Engineering, Biotechnology and Environmental Technology, University of Southern Denmark, Denmark

10:45-11:00 0523-015

Preliminary evaluation of Chlorella vulgaris cultivation using hydrothermal liquefaction wastewater Guoyang YuanCollege of Water Resource and Civil Engineering, China Agriculture University, China

11:00-11:15 2014-0390

Quantitative characterization of gas emissions during rape straw firing using TG-DSC-MS technology Qiulin Ma, Lujia Han, Guangqun Huang, China Agricultural University, China

11:15-11:30 2014-1100

Pyrolysis characteristic of pine nut shell and its activated carbon preparationGang Wang, Enchen Jiang, Mingfeng Wang, Dongdong Shi, Qian Ma, Min Ye, Xinhui Guo, Shijun Zhang, Shibo LiCollege of engineering, South China Agricultural University, China

11:30-11:45 2014-0478

Study on the products distribution and properties of product wood vinegar of pine nut shell continuous pyrolysisEnchen Jiang, Chenxi Zhao, Liyuan Qin, Aihui ChenNortheast Agricultural University, China

09:15-09:30 2014-0598A study of straw pot decomposition in soilJiapei Zha, De GaoNingbo institute of Technology, Zhejiang University, China

09:30-09:45 2014-0982

Screening of high efficient cellulose-degrading microorganisms and construction of microbial community for digestion residue aerobic compostingQiaoyin ZhuNortheast Agricultural University, China

Professor of Chinese Wind Energy Equipment Association, China

SESSION IV

POSTER SESSIONS

13:30 - 17:00

Topic (1) Material pretreatment and energy comprehensive research

86 41-001 0506-001Effects of Different Mixed Ratio of Maize Straw and

Crop Straw on Silage Quality

Ren HaiweiWestern China Energy &

Environment Research Center, Lanzhou University of

Technology

87 41-002 0506-002Effect of Different Additives

on The Silage Quality of Corn Stover and Lettuce Leaves

Technology

88 41-003 2014-0062 Effect of Drilling Quality on Biomass Yield

Maga JurajDepartment of Machines and

Production Systems, Faculty of Engineering, Slovak University

of Agriculture in Nitra

Slovakia

89 41-004 2014-0179 Transport Efficiency of Straw For Energy Utilization

Krocko VladimirSlovak University of Agriculture in

NitraSlovakia

90 41-005 2014-0461

A Novel Dynamic Modulate and Optimal Control Scheme

for a Tidal Current Energy Converter

Zhang HuidiZhejiang University China

91 41-006 2014-0548

Evaluation on Different Modes of Rural Energy Project for Large-scale Crop Residues

Utilization in China

Ai PingThe College of Engineering,

Huazhong Agricultural University, Wuhan

430070,China

92 41-007 2014-0691 Research on Ice-melting Method of Line Carrying Load

Wang ShuwenNortheast Agriculture University China

93 41-008 2014-1388

Preparation of Xylooligosaccharides

Producing Solid Waste based Biodegradable Seedling Pots

Si WeiweiChinese Academy of

94 41-009 2014-0709Effect of Moisture Content

and Particle Size on Friction Characteristics of Barley Meal

Peng FeiCollege of Engineering,China

Agriculture UniversityChina

95 41-010 2014-0928

Synthesis and Characterization of Starch-based Cationic

Flocculants for Harvesting Microalgae

Cheng YanlingBeijing Union University China

96 41-011 2014-0640 Study on the mode of straw supply in the energy utilization

Huo LiliChinese Academy of

Topic (2) Biomass energy utilization

97 42-001 0506-003

Optimizing Dilute-acid Hydrolysis (DACH) of

Distillers Grains and Ethanol Fermentation

Technology

98 42-002 0509-029

Optimizing Dilute-acid Hydrolysis (DACH)of

Distillers Grains and Ethanol Fermentation

Pei FangxiaWestern China Energy &

Technology

99 42-003 2014-0025Design and Experiment on Biomass Pellet Densifying

Machine for Residue

Wang MingyouNanjing Research

Institute of Agricultural Mechanization,Ministry of

Agriculture

100 42-004 2014-0151

The concept of small biogas-plants – An evaluation of

efficiency, economic feasibility and strategic fit to livestock

Frauke P. C. MüllerUniversity of Bonn Germany

101 42-005 2014-0354

Study of the Influence Mechanism of the Supernatant

Recycling on a Two-phase Anaerobic Fermentation Producing H2 and CH4

Wang YuanyuanHuazhong Agriculture

UniversityChina

102 42-006 2014-0429Experimental Study on Dense Performance of Straw Annular

Mould Forming Fuel

Yi WenyuSichuan Research & Design

Institute of Agricultural Machinery

103 42-007 2014-1153

Wet Semi-continuous Anaerobic Methane

Fermentation of Food Waste Fed with High Solids Content of Feedstock for Saving Water

Wang MingEngineering College of Northeast Agricultural

University, Harbin 150030

104 42-008 2014-0571Research Progress of

Compressing Technology on Alfalfa

Guo LeiCollege of Engineering, China

Topic (3) Compost

Topic (4) Pyrolysis

105 43-001 0514-007

Energetic Efficiency of the Composting Process of the

Head Cabbage Waste Mixed with Wheat Straw and Spent

Coffee Grounds in Dependence on the Additives Structure

Solowiej PiotrDepartment of Technical

Sciences, University of Warmia and Mazury

Poland

106 43-002 2014-0207

Effects of Mixture Ratio of Cow Manure and Greenhouse

Wastes on Anaerobic Co-digestion Process

Osman YALDIZAkdeniz University Turkey

107 43-003 2014-0611

The Effects of The Proportion of Mushroom Residue and Swine Manure on The Temporal and Spatial Characteristics of The

Aerobic Fermentation Temperature under Forced Ventilation

Zhang JunfengWuhan Institute of Agricultural

Mechanization ScienceChina

108 43-004 2014-1442Effects of Adding Urea and

Inorganic Salts Soil on Straw Anaerobic Digestion

Duan NaCollege of Water Resources & Civil Engineering, China

109 44-001 0618-081 Energetic Use of Solid Products of Pyrolysis Technology

Pavel KicFaculty of Engineering, Czech University of Life Sciences,

Prague

Czech Republic

110 44-002 2014-0577Pyrolysis Characteristics

of Cattle Manure Based on Components

Xin YaDepartment of Engineering, Agricultural energy Branch,

Huazhong Agriculture University, Wuhan, China

111 44-003 2014-0775

Fuel Gas From Rice Husk Via Microwave-assisted Pryolysis:

Catalysts to Improve Gas Products

Wang YunpuNanchang University, State Key Laboratory of Food Science and Technology, Nanchang 330047,

112 44-004 2014-1223

Research on Carbonization Experiment of Korshinsk Peashrub and Analysis on

Carbonizing Heat

Sun FengkunCollege of Engineering,Shanxi

Topic (5) Combustion and emissions

Topic (6) The solar wind geothermal energy and etc.

113 45-001 2014-0045Analysis of the Environmental Effects of the Burning of the Straw for Energy Purposes

Macak MiroslavDepartment of Machines and

Production Systems, Faculty of Engineering, Slovak University of Agriculture in Nitra, Nitra,

Slovakia

114 45-002 2014-0770Design and Application of High Efficiency Low Tar

Biomass Gasifier

Wang YunpuNanchang University, State Key Laboratory of Food Science and Technology, Nanchang 330047,

115 45-003 2014-1246Straw Mixed Combustion Characteristics and Kinetic

Analysis

Hou ShulinCollege of Engineer,China

116 46-001 2014-0147 Using Ground Water Heat Pumps to Heat Rearing Barns

Hannah LicharzInstitute of Agricultural

Engineering, University of Bonn

Germany

117 46-002 2014-0985Distributed solar photovoltaic

(pv) grid power generation system

Zhang ChuanyangShandong Agricultural

University TaianChina

118 46-003 2014-1068 Dynamic Model Of Solar Phovotolatic Systems

Enkhbayar GonchigdorjIrkutsk State Academy of Agriculture Department of

Physics and Electrical

Mongolia

119 46-004 2014-1264Technical Status and

Development of the Small Wind Power System in China

Zhai QingzhiCollege of Information and

Electrical Engineering，China Agricultural University

120 46-005 2014-1272Status Monitoring of Wind Power Generation System

Based on DC Bus

Chen LongCollege of Information and

121 46-006 2014-1307Thermal analysis of new

designed solar air heaters for drying purposes

Nuri CaglayanDepartment of Farm

Machinery, Faculty of Agricultural Engineering,

Akdeniz University

Turkey

Topic (7) Others

122 46-007 2014-1321The Design of Automatic

Monitoring and Controling System

Liu XiaoliDepartment of Cartography and Geography Information System，China Agricultural

University

123 46-008 2014-1369Adjustable Switch Control

Circuit for Piezoelectric Generation

Du SonghuaiCollege of Information and

124 46-009 2014-1448 Research of MPPT Control Based on LS-SVM

Cai JiheSchool of Electrical and Electrical Engineering, Changzhou Institute of

Technology

125 46-010 2014-1490Research on Control Strategy for Direct Drive Wind Power

System

Tang WeiCollege of Information and

Electrical Engineering , China Agricultural University

126 46-011 2014-0365 THE QUIK DEVELOPMENT OF CHINESE WIND FARMS

Shen DechangChinese wind energy equipment

associationChina

127 47-001 2014-0101Animal Behavior in A Fully Automatically Controlled

Dairy Farm

Anja GraeffTechnische Universitt München,

Center of Life and Food Sciences, Agricultural

Systems Engineering, Am Staudengarten2, D-85354 Freising-Weihenstephan,

Germany

128 47-002 2014-1301

Study on Total Factor Energy Efficiency Based on DEA of Agricultural Machinery

Industry

He QiongCollege of engineering, China

129 47-003 2014-1570Preparation and

Characterization of Cotton Stalk-plastic Film Composites

Xia NanCollege of Food Science and Engineering, Northwest A&F

University

SESSION V

DEVELOPMENT STRATEGY, ERGONOMICS AND SYSTEM MANAGEMENT

Monday, Sept. 15 08:00-20:00

Registration Location:the open place on the 1st floor near the Delegates Access

Gate C2, CNCC

Tuesday, Sept. 16

10:00-10:10 Tea Break

13:30-15:00 Session Opening Ceremony & Keynote Speeches Location: 301A+B,CNCC

15:00-15:15 Tea Break

15:15-17:40 Keynote Speeches Location: 301A+B,CNCC

Wednesday, Sept. 17

08:30-10:00 Technical

Oral Presentation

2. Safety and Ergonomics; Agriculture and Agricultural Mechanization Technical and

Economic Analysis Location: 403,CNCC

1st Annual Meeting of the Asian and Pacific Network for Testing of Agricultural Machinery (ANTAM)

Location: 301A+B,CNCC

10:00-10:15 Tea Break10:15-11:45 Technical

Oral Presentation

3. Full Mechanization of Field Crop Production Patterns and Approaches

Location: 403,CNCC

Oral Presentation

4. Agriculture and Agricultural Mechanization Technical and Economic Analysis; Logistics

Design and Management; Development Strategy and

Mechanism Innovation Location: 403,CNCC

15:00-15:15 Tea Break

Oral Presentation

5. Agricultural Engineering Education and Extension Training; Agricultural Systems Engineering

and Management Location: 403,CNCC

Overview of Session V: Development Strategy, Ergonomics and System Management

Thursday, Sept. 18

Oral Presentation

10:00-10:15 Tea Break

Oral Presentation

15:00-15:15 Tea Break

Oral Presentation

OPENING CEREMONY OF SESSION V

DEVELOPMENT STRATEGY, ERGONOMICS AND SYSTEM

MANAGEMENT

ORAL PRESENTATIONS

SEPTEMBER 16, 2014

TUESDAY AFTERNOON

13:30-17:40 Location: Room 301A-301B, the 3rd Floor of CNCCChair: Prof. Minli Yang,

Opening Speeches

13:30-13:35 Dr. Claus Grøn Sørensen

13:35-13:40 Mr. Min LiuVice President of Chinese Society for Agricultural Machinery, Director of China Agricultural Machinery Testing Center, MOA, China

13:40-13:45 Dr. Ravi Ratnayake,

Technical Presentation

1. Keynote presentations

Location: Room 301A-301B, the 3rd Floor of CNCC

Chair: Dr. Elisabeth Quendler, Department of Sustainable Agricultural Systems, University of Natural Resources and Life, Austria

13:45-14:10 0826-501Agricultural mechanization/engineering and food securityProf. Bill A. StoutHonorary President of CIGR, USA

14:10-14:35 0826-502

The development of agricultural operations management Dr. Claus Grøn SørensenDepartment of Engineering, Faculty of Science and Technology, University of Aarhus, Denmark

Executive Deputy Director of China Research Center for Agricultural

Mechanization Development， China Agricultural University, China

Chair of Section V on System Management of CIGR; Department of Engineering, Faculty of Science and Technology, University of Aarhus, Denmark

Director, Trade and Investment Division, United Nations Economic and Social Commission for Asia and the Pacific (UNESCAP)

14:35-15:00 0826-503

Agricultural mechanization strategies for sustainable production intensification – concepts and cases from Africa and AsiaDr. Josef KienzleAgro-Industry Officer, Infrastructure and Engineering Services Unit, Rural Infrastructure and Agro-Industries Division, FAO

15:00-15:15 Tea Break

Location: Room 301A-301B, the 3rd Floor of CNCC

Chairs:

Location: Room 301A-301B, the 3rd Floor of CNCCChairs:

Prof. Ladislav Nozdrovicky,Vice-Dean for International Relations Faculty of Engineering, Slovak University of Agriculture in Nitra, Slovak Republic

Prof. Jin Tong, College of Biological and Agricultural Engineering, Jilin University,

Changchun, Jilin, China

15:15-15:35 0826-504

Agro-value chain analysis and development Dr. Namal SamarakoonIndustrial Development Officer, Agri-Business Development Branch, UNIDO Headquarters

15:35-15:55 0826-505

Locally relevant and globally preeminent agricultural and biological engineeringProf. K.C. TingHead of Department of Agricultural and Biological Engineering, University of Illinois at Urbana-Champaign, USA

15:55-16:15 0826-506The Role of International Standards in Enhancing Safety in AgricultureDr. Michael RyanHead of the OECD Codes & Schemes

16:15-16:35 0826-507

Testing networks’ role in improving the ergonomics, safety and quality-whole system management of farm machines Mr. Sandro LiberatoriDirector General, ENAMA/ENTAM, Rome, Italy

16:35-16:55 0826-508India’s new sub-mission on agricultural mechanizationMs. Rani KumudiniJoint Secretary of the Indian Ministry of Agriculture, India

16:55-17:15 0826-509

The Development and Policy of Agricultural Mechanization in China Prof. Minli YangExecutive Deputy Director of China Research Center for Agricultural Mechanization Development, China Agricultural University, China

17:15~17:35 0826-510

Prospect for Regional Cooperation in Sustainable Agricultural MechanizationMr. Bing ZhaoHead of United Nations Centre for Sustainable Agricultural Mechanization (UNCSAM)

17:35-17:40 Summary

10:00-10:15 Tea Break

08:30-08:45 2014-0216Accident at work with fertilizer spreaders in Austrian agriculture Dr. Elisabeth Quendler, Department of Sustainable Agricultural Systems, University of Natural Resources and Life, Austria

08:45-09:00 2014-0836

Cognitive ergonomics of agricultural vehicles: mental workload assessment in multiple information presentation environmentXiaoping JinChina Agricultural University, China

09:00-09:15 2014-1252

Analysis of the dynamic characteristic of a transmission gear with high contact ratioChangran HeBeijing Information Science and Technology University, China

09:15-09:30 2014-0051

Evaluation of greenhouse microclimate performance under arid conditions utilizing wireless sensor networksProf. Moustafa FadelDepartment of Aridland Agriculture, College of Food and Agriculture, United Arab Emirates University, UAE

09:30-09:45 2014-1408

The parametric design of agricultural machinery cab modeling based on the analysis of ergonomics dataSha LiuAssociate Professor of College of Engineering, China Agricultural University

09:45-10:00 2014-1425Causal influence of farm machinery purchase policy to food production Dr. Changfeng Jiao College of Economics and Management, China Agricultural University,China

SEPTEMBER 17, 2014

WEDNESDAY MORNING

08:30-12:00

2. Safety and Ergonomics; Agriculture and Agricultural Mechanization Technicaland Economic Analysis

Location: Room 403, the 4th Floor of CNCC

Chair: Prof. Yinsheng Yang, Dean of College of Biological and Agricultural Engineering,

Jilin University, Changchun, Jilin, China

3. Full Mechanization of Field Crop Production Patterns and Approaches

Location: Room 403, the 4th Floor of CNCCChair: Prof. Marcelo Dodson, College of Business Administration, Argosy University, Brazil

10:15-10:30 2014-0490

Study on the comprehensive evaluation of corn planting patterns in the central area of Jilin province based on the household investigationWei LinChina Agricultural University, China

10:30-10:45 2014-0785A model for carbon footprint of agriculture mechanization: LCA case study of maize production in northeast ChinaHainaWang, Jilin University, China

10:45-11:00 2014-0109

The evaluated rice mechanization in the selected area of Thailand: Nakronrachasima provincePhakwipha SutthiwareePh.D Student, College of Engineering, China Agricultural University, China

11:00-11:15 2014-1628

Agricultural mechanization production systems and case analysis based on combination of machinery and agronomyDr. Yuxiang HuangNorthwest A&F University, China

11:15-11:30 2014-0833

The contribution of irrigation and other factors to grain yield growth in China between 1978 and 2011Yong Wu China Agricultural University, China

11:30-12:00 Free speech

SEPTEMBER 17, 2014

WEDNESDAY AFTERNOON

13:30-16:30

4. Agriculture and Agricultural Mechanization Technical and Economic Analysis;Logistics Design and Management; Development Strategy and Mechanism Innovation

Location: Room 403, the 4th Floor of CNCCChair: Dr. Changfeng Jiao, College of Economics and Management, China Agricultural

University, China

13:30-13:45 2014-1472 Earned value management: the soybean harvesting case studyProf. Marcelo DodsonCollege of Business Administration, Argosy University, Brazil

13:45-14:00 2014-1461On cost issues of freshwater live fish circulation in China Prof. Xiaohong LeeCollege of Economics and Management, China Agricultural University,China

14:00-14:15 2014-1616Study on evolution mechanism of pig-breeding industry chain in ChinaWenhai WangChina Agricultural University, China

14:15-14:30 2014-0203

Simulation of Agricultural Logistic Processes with K-Nearest Neighbors AlgorithmProf. Heinz BernhardtRuhr-Universität Bochum, Germany

14:30-14:45 2014-0110

Agricultural mechanization policy of Thailand and China focus on rice production Phakwipha SutthiwareePh.D Student, College of Engineering, China Agricultural University, China

15:15-15:30 2014-0413

Personnel training: the comparison of modes and implications for agricultural engineering discipline in ChinaLijuan ShiPh.D Student, College of Engineering, China Agricultural University, China

15:30-15:45 2014-0868The design of two-axis attitude control system Chao MaPh.D Student, China Agricultural University, China

15:45-16:00 0618-043Field trials effectiveness analysis of rice factory seeding technology Lina Zhang Ph.D Student, College of Engineering, China Agricultural University, China

15:00-15:15 Tea Break

5. Agricultural Engineering Education and Extension Training; Agricultural SystemsEngineering and Management

Location: Room 403, the 4th Floor of CNCC

Chairs: Prof. Ladislav Nozdrovicky, Vice-Dean for International Relations Faculty of Engineering,Slovak University of Agriculture in Nitra, Slovak Republic

1ST ANNUAL MEETING OF THE ASIAN AND PACIFIC NETWORK

FOR TESTING OF AGRICULTURAL MACHINERY (ANTAM)

SEPTEMBER 17, 2014

WEDNESDAY

09:00-18:00Location: 09:00-09:30 Chairs:

09:30-10:00

10:00-10:30

10:30-10:45 10:45-12:00

12:00-13:30

13:30-15:30

15:30-15:45

15:45-16:45

Head of United Nations Centre for Sustainable Agricultural Mechanization (UNCSAM)

Room 301A+B, the 3rd Floor of CNCCOpening of the 1st Annual Meeting of ANTAMMr. Bing Zhao,

Welcoming remarks by Mr. Min Liu, Director of China Agricultural Machinery Testing Centre (CAMTC)Opening remarks by Dr. Ravi Ratnayake, Director of Trade and Investment Division,ESCAPKeynote speechesRepresentative of the Ministry of Agriculture of ChinaMs. Rani Kumudini, Joint Secretary, Indian Ministry of Agriculture (TBC)

Tea Break (Group Photo)

Agenda Item 1 Election of Chair and adoption of agendaAgenda Item 2Country reviews(Countries by alphabetical order, 10 mins for each country review)

Lunch Break

Agenda Item 3Country reviewsJoint presentation by consultants of CSAM on testing of agricultural machinery and agricultural mechanization in the Asia-Pacific (20 mins)

Tea Break

Agenda Item 4 Recap on ANTAM by CSAMOperational structure of ANTAMAgenda Item 4.1: Review of the ToRAgenda Item 4.2: Functions and responsibilities of the Lead Testing Stations/Focal Points

SEPTEMBER 18, 2014

THURSDAY

09:00-17:30

SEPTEMBER 19, 2014

FRIDAY

09:00 TECHNICAL TOUR TO CAMTC

Location: 09:00-10:30 10:30-10:45

10:45-11:45 11:45-12:00 15:30-15:45

13:30-15:30 15:30 17:30

16:45-17:00 17:00-18:00

Agenda Item 4.3: Functions and composition of the Technical Working Group (TWG)Agenda Item 4.4: Financial and administrative issues

Agenda Item 5Election of Chair, Vice Chair and Lead Focal Station/Focal Point for 2014-2015Agenda Item 6Work plan of ANTAM for 2014-15

Room 301A+B, the 3rd Floor of CNCC Agenda Item 7Relationship/partnership with major stakeholdersPresentations by OECD, FAO, UNIDO and ENTAMModalities of partnership/collaboration

Tea Break

Agenda Item 8Proposal for consideration: simplified testing methodology for knapsack sprayersWrap-up and closing

Tea Break

Continued discussion and closingTechnical tour to China Agricultural UniversityDinner hosted by CAMTC

SESSION V

POSTER SESSIONS

13:30 - 17:00

Topic (4) Agriculture and agricultural mechanization technical and economic analysis

130 54-001 2014-0144Digital Information System to Support Area of Agricultural

Machines

Ricardo de arvalhoInstituto Federal Sul Rio

Grandense

131 54-002 2014-0481

Research on the Influence of Montanic Fragmental Farmland

on the Work Efficiency of Walking Transplanter

Chen CongNanjing Research Institute for Agricultural Ministry of

Agriculture

132 54-003 2014-0634

An Extended TPB Model in Consumers’ Intention to Purchase Agricultural

Machinery: An Empirical Study

Lv FengJilin University China

133 54-004 2014-0656

Application Prospect of Beidou Navigation Satellite System to Monitor the Pollution of

Agriculture Soils with Heavy Metals

Guo HongpengJilin University China

134 54-005 2014-0767Development of Wireless

Remote Control System for Greenhouse Ventilation

Liu WeiCollege of Engineering,

Electromechanical Branch, China Agricultural University,

Beijing, China

135 54-006 2014-0835

Research on Remote Wireless Control System of The Opening Degree of Thermal Blanket on

Greenhouse Base on Wi-Fi

Cheng ZhihuaDepartment of Mechatronic

Engineering, China Agricultural University

136 54-007 2014-0872A Model Construction Method of Large Combine Harvester

Chassis Frame Flatness

Wu ZhidanCollege of Engineering,

Electromechanical Branch, China Agricultural University

POSTER SESSIONS

08:30 - 12:00Topic (4) Agriculture and agricultural mechanization technical and economic analysis

Topic (3) Detection and safe agricultural production

137 54-008 2014-1101Study on Evaluation System of Agricultural Construction

Project in China

Liu YangChinese Academy of

138 54-009 2014-1216

Evaluation of the Technical and Economical Effects of the

Using of Machinery System for Processing of Straw for Energy

Purposes

Nozdrovicky LadislavDepartment of Machines and Production Systems, Faculty

of Engineering, Slovak University of Agriculture in

Slovakia

118 51-001 0618-068Review on Research of

Urban Low-carbon Transport Development Strategy

Chen YuexiaSchool of Automobile and

Traffic Engineering, Jiangsu University, Zhenjiang 212013

119 51-002 2014-0396

Research Status and Suggestions on Engineering Mode of Major

Food Crops Mechanized Production in China

Huang GuangqunChina Agricultural University China

120 51-003 2014-0494

The Production Mode Transformation Ways and

Countermeasure Research of China Rape

Li ZhaodongHuazhong Agriculture

UniversityChina

121 51-004 2014-0987Construction of Agricultural

Standardization Development Paths Based on Systems Science

Li JiyueInstitute of Agricultural engineering standards &

norms, Chinese Academy of Agricultural Engineering

No. Poster # Paper # Paper Title Name & Institution Country

122 53-001 2014-1475Study on Behavior of Pig-

Breeding Farmers in Controlling Pig Quality and Safety

Wang HongliCollege of Biological and

Topic (5) Logistics Design and Management

123 55-001 2014-0368

Status Analysis of Chinese Famous-region Herbal Medicine

Planting Base and Building of Materialized and Closed

Management Mode-An Empirical Analysis Based on Infinitus (China)

Co., Ltd. Supplier

. Zhao ZusongyingCollege of Engineering,

China Agricultural University, Beijing, China;

124 55-002 2014-1117

The Applicable Engineering Modes for The Small Wholesale Market of Melons and Vegetables in Hainan

Production Base

Sun JingInstitute of Agro-Products Processing Engineering,

Chinese academy of Agricultural Engineering

125 55-003 2014-1437

Research on Total Quality Management System in

Heilongjiang Agricultural Autumn Soil Preparation Project

Li GuolinHeilongjiang Institute of Agricultural Mechanical

Engineering Science

126 55-004 2014-1509

A Cooperative Game Analysis of Member Interests in The

Agricultural Supply Chain by Farmer Cooperatives Association

Participated

Li ChongCollege of Biological and Agricultural Engineering,

Jilin University

Topic (3) Detection and safe agricultural production

No. Poster # Paper # Paper Title Name & Institution Country

127 56-001 2014-1503Zeng De-chao and China’s Agricultural Engineering

Education

Feng MinThe Institute of Agricultural History, China Agricultural

University

POSTER SESSIONS

13:30 - 17:00Topic (2) Full mechanization of field crop production patterns and approaches

110 52-001 0618-042Comparative Study on the Land-scale Management Pattern Based

on Game Theory in Yushu

Dou BingzhengCollege of engineering, China

111 52-002 0618-044Study on Efficiency of Wheat-

rice Double Cropping Mechanical Production Pattern in Jiangsu Province

Cao WeihuaCollege of Engineering，

China Agricultural UniversityChina

112 52-003 0618-045

Spatial Distribution Optimization Study of the Engineering Pattern

of Paddy Rice Mechanized Production in Southern Double Rice Cropping Region in China

Yang MinliCollege of Engineering,

113 52-004 0618-046

Study on the Effecting Factors of Agricultural Machinery and

Equipment of Paddy Mechanized Production in Liyang

Yang MinliCollege of Engineering, China

114 52-005 0618-047

Study on the Model of Employing Service Through Bidding in Agricultural Machinery

Operation----Taking BoXin Company as a Case

Yang MinliCollege of engineering, China

115 52-006 2014-0826

The Investigation and Analysis of Sugarcane Mechanization

Harvesting in Zhanjiang State Farm

Liu HaochunKey laboratory of Key

Technology on Agricultural Machine and Equipment

(South China Agricultural University), Ministry of

Education

116 52-007 2014-0848Extensible Evaluation Model for The Selection of Ridging

Machinery

Zhang WeipengCollege of Engineering, China

117 52-008 2014-0980

Study on the Development of the Technology Extension System

of Agricultural Mechanization in China

Li AnningCenter for Agriculture

Mechanization Technology Development & Extension

118 52-009 2014-0984

Study of Agricultural Mechanization Technology

Extension in Chongqing City Based on the SWOT Theory

Ao FangyuanChongqing agricultural

mechanization technology extension station

119 52-010 2014-1155

Situation, Problems and Countermeasures of Vegetable

Traceability System in China: A Survey of Vegetable Production Base and Processing Enterprises

in Beijing and Shandong Province

Tang JinCollege of Biological and

120 52-011 2014-1538Analysis of Sugarcane

Mechanized Harvesting Environment System

Wei QiaoCollege of Engineering, China

121 52-012 2014-1429Design of the full hydraulic

driving high frame field operation vehicle

Qin WeihuaCollege of Mechanical and

Electrical Engineering, Henan Agricultural University

122 52-013 2014-1361 Design of full hydraulic driving field elevated operating machine

Qin WeihuaCollege of Mechanical and

Electrical Engineering, Henan Agricultural University

SESSION VI

POSTHARVEST TECHNOLOGY AND PROCESS ENGINEERING

Monday, Sept. 15 08:00-20:00

Gate C2, CNCC

Tuesday, Sept. 16

10:00-10:10 Tea Break

13:30-15:00 Session Opening Ceremony & Keynote Speeches Location: 310,CNCC

15:00-15:15 Tea Break

15:15-17:45 Session Opening Ceremony & Keynote Speeches Location: 310,CNCC

Wednesday, Sept. 17

1. Advanced Food Processing Technologies

Location: 401,CNCC

Special Session Research and

Development of Plant Resources

Location: 402A,CNCC

4. Drying & Bio-processing Technology Location: 402B,CNCC

10:00-10:15 Tea Break

Location: 401,CNCC

Special Session Research and

Development of Plant Resources

Location: 402A,CNCC

4. Drying & Bio-processing Technology Location: 402B,CNCC

12:15-13:30 Lunch Location: Plenary Hall A, CNCC

2. Postharvest Handling and Management

Location: 401,CNCC

3. Functional Foods Processing Technology

and Evaluation Location: 402A,CNCC

Executive Board Meeting of Packaging and Food

Engineering Branch of Chinese

Mechanical Engineering Society (CMES)

Location: 402B,CNCC15:00-15:15 Tea Break

Location: 401,CNCC

3. Functional Foods Processing Technology

and Evaluation Location: 402A,CNCC

Executive Board Meeting of Packaging and Food

Engineering Branch of Chinese

Mechanical Engineering Society (CMES)

Location: 402B,CNCC

Overview of Session VI: Postharvest Technology and Process Engineering

Thursday, Sept. 18

5. Nondestructive Measurements &

Biosensors Location: 401,CNCC

7. Quality Measurement, Modeling and Control（1）

Location: 402A,CNCC

Location: 402B,CNCC

10:00-10:15 Tea Break

5. Nondestructive Measurements &

Biosensors Location: 401,CNCC

Location: 402A,CNCC

10. Packaging and Storage Technology

Location: 402B,CNCC

6. Imaging and Image Processing

Location: 401,CNCC

Location: 402A,CNCC15:00-15:15 Tea Break

Location: 401,CNCC

Location: 402A,CNCC

OPENING CEREMONY OF SESSION VI

POSTHARVEST TECHNOLOGY

AND PROCESS ENGINEERING

SEPTEMBER 16, 2014

TUESDAY AFTERNOON

13:30-14:00

Location: Room 310, the 3rd Floor of CNCCChair: Prof. Jerzy Weres, Professor of Poznan University of Life Sciences, Poland

13:30-13:35 Address by Prof. Da-Wen SUN,

13:35-13:45 Address by Prof. LI Shujun, the Vice Chair of Technical Section VI, CIGR13:45-13:55 Address by Dr. Amauri Rosenthal,

13:55-14:00 Close of the Opening Ceremony

Location: Room 310, the 3rd floor of CNCCChairs: Prof. Mingyong Xie, Vice President and professor of Nanchang University, China Prof. Prof. Jose M. Aguilera, Former President of CONICYT, Chile

14:00-14:30 0826-601

Recent developments in hyperspectral imaging for quality and safety evaluation of agricultural and food productsProf. Da-Wen SUNCIGR President, Member of Royal Irish Academy, Member of Academia Europaea, Ireland

14:30-15:00 0826-602Science and technology for food innovationProf. Jose M. AguileraFormer President of CONICYT, Chile

PLENARY KEYNOTE PRESENTATIONS

SEPTEMBER 16, 2014

TUESDAY AFTERNOON

14:00-17:15

the Honorary Chair of Technical Section VI, CIGR, the President of CIGR

EMBRAPA Food Technology Rio de Janeiro, Secretary of Technical Section VI, CIGR

15:00-15:15 Tea Break

15:15-15:45 0826-603

Applications of radio frequency heating for postharvest pest control in agricultural products Prof. Shaojin WangProfessor of Northwest A&F University, China

15:45-16:15 0512-003

The latest functional developments and applications of bio-based materials to food packaging in Japan Prof. Toshinori KimuraFormer Secretary General of CIGR, Professor Emeritus of Hokkaido University, Japan

16:15-16:45 0826-605

Nondestructive detection technology and equipment for meat quality and safety Prof. Yankun PengProfessor of China Agricultural University, China

16:45-17:15 0826-607Study on the structure and bioactivity of polysaccharides from food resourcesProf. Mingyong XieVice President and professor of Nanchang University, China

Time: 08:30-10:00Location: Room 401, the 4th floor of CNCCModerators: Prof. Yankun Peng, Professor of China Agricultural University Prof. Can Ertekin,

ORAL PRESENTATIONS

SEPTEMBER 17, 2014

WEDNESDAY MORNING

08:30-12:15

08:30-08:45 2014-1424

Optimization of lentinan extraction from Lentinusedodes stems with ultra high pressure by quadratic rotation-orthogonal composite experimental designJirui DuCollege of Biosystems Engineering and Food Science, Zhejiang University, China

08:45-09:00 0509-035Design and development of biomechatronic productsShujun ZhangUniversity of Gloucestershire, UK

Head of Department of Agricultural Machinery, Akdeniz University, TURKEY

10:00-10:15 Tea Break

Time: 10:15-12:15Location: Room 401, the 4th floor of CNCCModerators: Prof. Lanfang Zhang,

Prof. LAL.Kushwaha, University of Saskatchewan, Canada

10:15-10:30 2014-0741

Design and realization of a flow balance control system for buckwheat hulling processShaozhong LvCollege of Mechanical and Electrical Engineering, China

10:30-10:45 2014-0670

The effect of a photoperiodic green light program during incubation on embryo development and hatch processQin TongRoyal Veterinary College, UK

10:45-11:00 2014-1238

Synergistic effect of pulsed electric field and ultrasound on sterilization of yellow rice wineChenang LvCollege of Biosystems Engineering and Food Science, Zhejiang University, China

11:00-11:15 2014-1619

Control special mechanical energy output by adjusting screw configuration during soybean protein extrusion texturizationYingquan ZhangInstitute of Agro-Products Processing Science and Technology, Chinese Academy of Agricultural Sciences(CAAS), China

09:00-09:15 2014-1273

Simulation and experiment of the motion characters in twin-screw extruder based on SolidworksLixue ZhuZhongkai University of Agriculture and Engineering, China

09:15-09:30 2014-0355

Enhancement of biogas production from greenhouse wastes by pre-treatment and co-digestionNuriye Altinay PerendeciDepartment of Environmental Engineering, Engineering Faculty, Akdeniz University, Antalya, Turkey

09:30-09:45 0509-014

Problem and countermeasure discussion of mechanized farming of main double cropping grain cropJiyuan LiuShandong Academy of Agricultural Machinery Sciences, China

09:45-10:00 2014-1267Development a method to manufacture fermented beef jerkyLonghao YuHeilongjiang Bayi Agricultural University, China

Chinese Academy of Agricultual Mechanizartion Sciences (CAAMS), China

11:15-11:30 0508-007

Elimination of certain foodborne pathogens in peach juice by the combination of ultra sonication and eau de roseŞeyma AydınAbantIzzet BAYSAL University, Turkey

11:30-11:45 2014-0178Safety evaluation of cadmium and its effects on lipid metabolismYanle YuZhejiang Gongshang University, China

11:45-12:00 2014-0254

The influence of environmental electromagnetic field on electric parameter selection of fruit and vegetable preprocessed by high-voltage pulsed electric fieldFeiyu MaEngineering College of Shanxi Agricultural University, China

12:00-12:15 0618-036

Design and experiment of SBJ20 automatic potato cake molding machineJiangtao HeChinese Academy of Agricultural Mechanization Sciences, China

Time: 08:30-11:45Location: Room 402A, the 4th floor of CNCCModerator: Prof. Mark L. Wahlqvist, Fuli Institute of Food Science, Zhejiang University, China

SPECIAL SESSION

RESEARCH AND DEVELOPMENT OF PLANT RESOURCES

08:30-09:00 0526-032

Development of innovative nano (micro)-encapsulation process for health-promoting components in functional foodsProf. John ShiGuelph Food Research Center , Agriculture and Agri‐Food Canada, Canada

09:00-09:30 0826-608

The research and database development for Chinese features resources phytochemicalsProf. Donghong LiuExecutive Director of Fuli Institute of Food Science, Zhejiang University, China

09:30-10:00 0526-031

Development of plant resources: hydrolysis of cassava into glucose sweetenerProf. Arthur A. TeixeiraFuli Institute of Food Science, Zhejiang University, China

10:00-10:15 Tea Break

10:15-10:45 0826-609Functionalities of Chinese traditional fermented soy productsProf. Yongqiang ChengChina Agricultural University, China

10:45-11:00 2014-0694

The advances and challenges of impingement technology in agricultural products processing-a reviewHongwei XiaoChina Agricultural University, China

11:00-11:15 2014-0100

Development of a bush mango (IrvingiaGabonensis) nutcrackerAkindele Folarin ALONGEDepartment of Agricultural and Food Engineering Faculty of Engineering, University of Uyo, Nigeria

11:15-11:30 2014-0618Study on production and technology of potato hash brownsYang YangChinese Academy of Agricultural Mechanization Sciences, China

11:30-11:45 2014-1444Kinetics of peanut protein extracted by AOT reverse micelleChenxian YangHenan University of Technology, China

2. Drying & Bio-processing Technology

Time: 08:30-10:00Location: Room 402B, the 4th floor of CNCCModerators: Prof. Toshinori Kimura,

Prof. Yongqiang Cheng, Professor of China Agricultural University, China

08:30-08:45 0508-027

Microwave-vacuum drying characteristics and quality of scallop adductor muscleGuochen ZhangDalian Ocean University, China

08:45-09:00 2014-0309

Analysis on the quality of the dehydrated ginger slices dried by hot air and microwave fluidizationWeiqiao LvChinese Academy of Agricultural Mechanization Sciences, China

09:00-09:15 2014-0476

Numerical simulation on superheated steam fluidized bed drying at different operating pressuresZhifeng XiaoJingdezhen Ceramic Institute, China

former Secretary General of CIGR, Professor Emeritus of Hokkaido University, Japan

09:15-09:30 2014-0325

Mathematical modeling and experimental investigation of drying behavior of green peas in an infrared-assisted hot air dryerDariush ZareAssociate Prof., Biosystems Engineering Dept., Shiraz University, Shiraz, Iran

09:30-09:45 2014-0340

The technology research of wireless real-time monitoring fruit and vegetables’ moisture during freeze-dryingHeling ZhangCollege of Engineering , Shanxi Agricultural University, China

09:45-10:00 2014-0698

Study of correlations between the dielectric properties measured by coaxial probe technique and drying characteristics of fruits and vegetablesXinhui WuCollege of Engineering, Shanxi Agricultural University, China

10:00-10:15 Tea Break

Time: 10:15-12:30Location: Room 402B, the 4th floor of CNCCModerators: Prof. Umezuruike Linus Opara,

Prof. Yongqiang Cheng, Professor of China Agricultural University, China

10:15-10:30 2014-1323

Simulation and validation of a suitable model for thin layer drying of ginger Rhizomes in an induced draft dryerAbhijit BorahDepartment of Agricultural Engineering, Assam Agricultural University1, Assam, India

10:30-10:45 2014-0789

Study of carrot dry-blanching and dehydration using sequential infrared radiation heating and hot air dryingBengang WuJiangsu University, China

10:45-11:00 2014-0319

Optimization, evaluation and quality assessment of drying process of a spherical product in a hot air infrared assisted vibratory bed dryer case study: green peaDariush ZareAssociate Prof of Biosystems Engineering Dept., Shiraz University, Shiraz, Iran

11:00-11:15 2014-1074

Study on the dry processing parameters and its model for Chinese dried noodleYimin WeiInstitute of Agro-Products Processing Science and Technology, Chinese Academy of Agricultural Sciences (CAAS), China

11:15-11:30 0509-012

Effect of airflow rate and air temperature of flash dryer with horizontal spinner on drying of okaraJoko Nugroho Wahyu KaryadiGadjah Mada University, Indonesia

Chair of Technical Section VI, CIGR, Distinguished Prof. &DST/NRF South African Research

11:30-11:45 2014-1394

The effects of protective carriers on the inactivation kinetics of lactic acid bacteria during convective droplet dryingNan FuSoochow University, China

11:45-12:00 2014-1632

Study on electrical properties of soymilk based on AC impedance methodHuanlu SongCollege of Mechanical and Electronic Engineering, Shandong Agricultural University, China

12:00-12:30 0509-052Application of 2DCOS-NIR on identifying meat and bone mealChengxu LvChina Agricultural University, China

Time: 13:30-15:00Location: Room 401, the 4th floor of CNCC Moderator: Prof. Shaojin Wang, Professor of Northwest A&F University, China

SEPTEMBER 17, 2014

WEDNESDAY AFTERNOON

13:30-17:00

13:30-13:45 0826-606

Beyond production: Harnessing technological innovations in postharvest science and engineering to realize the African agriculture transformation agenda Prof. Umezuruike Linus OparaChair of Technical Section VI, CIGR, Distinguished Professor &DST/NRF South African Research, South Africa

13:45-14:00 2014-1344

Study on storability of plums of different cultivars at low temperature and their evaluation based on principal component analysisJiao WangChina Agricultural University, China

14:00-14:15 0508-017

Study on the physicochemical properties of the pork cooked by microwave ovenZhong HanSouth China University of Technology, China

14:15-14:30 2014-0276

Changes in the physicochemical properties and microstructures of frozen pork dumpling filler caused by temperature and duration of storageBaohua KongNortheast Agricultural University, China

14:30-14:45 0509-011

Thermal insulation of a flour mill to improve effectiveness of the heat treatment for insect pest controlPorto S.M.CUniversity of Catania, Italy

14:45-15:00 2014-0229Radio frequency treatments for disinfesting chestnutsShaojin WangProfessor of Northwest A&F University, China

15:00-15:15 Tea Break

Time: 15:15-17:00Location: Room 401, the 4th floor of CNCCModerators: Prof. Peter Schulze Lammers,

Prof. Mingyong Xie, Vice President and professor of Nanchang University, China

15:15-15:30 2014-0230Design and experiment of rotary banana carpopodium cutting machineZhengbo ZhuSouth China Agricultural University, China

15:30-15:45 2014-1366

Review on morphological defense changes of sub- and ultra-structure of fruit cell against postharvest infections by fungal pathogens and exogenous regulation involvedShuzhi YuanChina Agricultural University, China

15:45-16:00 0618-031

Rapid and non-invasive determination of K value for evaluation of fish freshness by hyperspectral imaging techniqueJunhu ChengSouth China University of Technology, China

16:00-16:15 0514-008Development of on-line apple bruise detection systemYichich Chiu, National Ilan University, Chinese Taipei

16:15-16:30 2014-1621A new kind of walnut comprehensive utilizationShuzhen HuChinese Academy of Agricultural Mechanization Sciences, China

16:30-16:45 2014-1257

Effects of vacuum-infiltrating treatment with yeast mannan on maintaining storage quality and suppression of postharvest disease of tomato fruitFang XieChina Agricultural University, China

16:45-17:00 2014-1358

The application on the fruit grading of the Kinect systemGaofeng ZhouCollege of Biosystems Engineering and Food Science, Zhejiang University, China

Department of Agricultural Engineering, University of Bonn, Germany

4. Functional Foods Processing Technology and Evaluation

Time: 13:30-15:00Location: Room 402A, the 4th floor of CNCCModerator: Prof. Haile Ma,

15:00-15:15 Tea Break

13:30-17:00 Executive Board Meeting of Packaging and Food Engineering Branch of Chinese Mechanical Engineering Society (CMES) Location: Room 402B, the 4th floor of CNCC

13:30-13:45 2014-0532

The effect of different strains fermentation on the content of soybean oligosaccharides in DouchiJin GanChina Agricultural University, China

13:45-14:00 2014-0733

Ultrasonic enhanced crude intracellular polysaccharide fermentation of Phellinus Igniarius and its antioxidant activities in vitroHenan ZhangJiangsu University, China

14:00-14:15 2014-0849

Antioxidant properties of a unique LAB culture isolated from Harbin dry sausageQian ChenNortheast Agricultural University, China

14:15-14:30 2014-1215

Multivariate analysis of precooling treatment on fruit quality and reactive oxygen species of apricot fruitJian LiBeijing Technology and Business University, China

14:30-14:45 2014-1462

Antibacterial performance of nisin and chitosan nanoparticles and their characterization after incorporation into zein-based edible packagingYanru GuoShanghai Ocean University, China

14:45-15:00 2014-1611

The influence of cultivating conditions on the production of mycelium and triterpenoids of Antrodiacinnamomea CCRC 35396 in submerged culturesWeiwei WangJiangsu University, China

Dean of School of Food and Biological Engineering, Jiangsu University, China

5. Nondestructive Measurements & Biosensors

Time: 08:30-10:00Location: Room 401, the 4th floor of CNCCModerators: Dr. Amauri Rosenthal, EMBRAPA Food Technology Rio de Janeiro, Brazil Prof. Yimin Wei,

10:00-10:15 Tea Break

Time: 10:15-12:30Location: Room 401, the 4th floor of CNCC

SEPTEMBER 18, 2014

THURSDAY MORNING

08:30-12:30

08:30-08:45 2014-0105

Non-destructive detection of specific spoilage bacteria growth and sensory change on chilled pork surface by Vis/NIR spectroscopyLeilei ZhangChina Agricultural University, China

08:45-09:00 0519-007Sixty egg hairline crack detection system for grading table eggsKurt C. LawrenceU.S. Department of Agriculture, USA

09:00-09:15 2014-1005

The research of fresh meat moisture detection method by NIRJianxu Wang College of Information and Electrical Engineering, ChinaAgricultural University, China

09:15-09:30 2014-1296

The analysis of glucose in commercially available papaya powder by infrared spectroscopyHong LiuHainan Normal University, China

09:30-09:45 2014-1370

New reference materials and automatic placing method for NIR application in fruit internal quality detectionLuyue ZhangZhejiang University, China

09:45-10:00 2014-1473

The assessment of the moisture content of walnut based on near-infrared hyperspectral technologyJiyu PengCollege of Biosystems Engineering and Food Science, Zhejiang University, China

Institute of Agro-Products Processing Science and Technology, Chinese Academy of Agricultural Sciences (CAAS), China

Moderators: Prof. Vilas M. Salokhe,

Prof. Kang Tu, Prof. of Nanjing Agricultural University, China

10:15-10:30 2014-1483

Characterizing pear tissue with optical absorption and scattering coefficientsDong HuCollege of Biosystems Engineering and Food Science, Zhejiang University, China

10:30-10:45 2014-1505

Distinguish of different kinds of meat using VIS/NIR spectroscopyHui Guo College of Mechanical and Traffic, Xinjiang AgriculturalUniversity, China

10:45-11:00 0509-054

Rapidly quantitative determination of soluble solids in bottled vinegar based on NIRS and PLS methodShangshan YanShanxi Agricultural University, China

11:00-11:15 2014-0859

Acetylcholinesterase biosensor based on multiwall carbon nanotubes-SnO2-chitosan nanocompositeXia SunShangdong University of Technology, China

11:15-11:30 2014-0893

Electronic nose and GC-MS application for early detection and classication of pathogens in strawberry fruitKang TuNanjing Agricultural University, China

11:30-11:45 2014-1020

On eggshell cracks detection method based on a magnetostrictive transducerWei LuNanjing Agricultural University, China

11:45-12:00 2014-1063

Research on multi-channel ultrasonic eggshell thickness measurement system based on wavelet transform modulus maximaHanchi ZhangChina Agricultural University, China

12:00-12:15 2014-1135

Using independent components analysis combined with genetic algorithm to mine the feature signals of electronic nose in honey nectar detectionPolin ShiSub-Institute of Food and Agriculture, China National Institute of Standardization, Beijing, China

12:15-12:30 2014-1297

Determination of trace elements in Synsepalumdulcificum leaf by inductively coupled plasma mass spectrometryHong LiuHainan Normal University, China

President of AAAE (2014-2015), Vice Chancellor of Kaziranga University, India

6. Quality Measurement, Modeling and Control (1)

Time: 08:30-10:00Location: Room 402A, the 4th floor of CNCCModerators: Prof. Gajendra Singh, Professor of Indian Agricultural research Institute (IARI), India Prof. Donghong Liu,

10:00-10:15 Tea Break

Time: 10:15-12:00Location: Room 402A, the 4th Floor of CNCCModerator: Prof. Zhongli Pan, Professor of University of California, Davis, USA

08:30-08:45 2014-0480

Effects of ultrasound treatment on spoilage microorganisms, quality and antioxidant capacity of cherry tomatoes during storageDonghong LiuFuli Institute of Food Science, Zhejiang University, China

08:45-09:00 2014-0586

Prediction of the intercellular space volume of citrus by physical measurementsAndi DirpanDepartment of Biomechanical System, Agriculture Faculty, EHIME University, Ehime, Japan

09:00-09:15 2014-0719

Comparison of content of phenol, tannin, and polyphenol oxidase in ten varieties banana (Musa L.var AAA) during different ripen stagesFen LiaoInstitute of Agro-products Processing, Guangxi Academy of Agricultural Sciences, China

09:15-09:30 2014-1280

Effect of cassava flour substitution in extruded fish feed on its heat pump drying and microscopyDr. Folasayo Titilola FAYOSETshwane University of Technology, Pretoria, South Africa

09:30-09:45 2014-0127

Pork sarcoplasmic protein hydrolysis and flavor development induced by a unique LAB culture isolated from Harbin dry sausageQian ChenNortheast Agricultural University, China

09:45-10:00 2014-1624

Effect of trans-glutaminase and glycerol on the properties of fish skin gelatin filmsShuzhan WangHenan University of Technology, China

Executive Director of Fuli Institute of Food Science, Zhejiang University, China

Time: 08:30-09:30Location: Room 402B, the 4th floor of CNCCModerator: Prof. Cristina Ratti,

10:15-10:30 2014-1427

The Effect of modified buckwheat flour on viscosity properties of wheat flour and sensory qualities of noodlesYingquan ZhangInstitute of Agro-Products Processing Science and Technology, Chinese Academy of Agricultural Sciences (CAAS), China

10:30-10:45 2014-1103

Discrimination and prediction of strawberry juice quality based on electronic tongueShanshan QiuCollege of Biosystems Engineering and Food Science, Zhejiang University, China

10:45-11:00 2014-0838

Mathematical modelling of microwave, combined microwave-convective and convective drying parameters of pumpkinSevil KaraaslanUniversity of Suleyman Demirel, Faculty of Agriculture, Department of Agricultural Machinery, 32260 Isparta, Turkey

11:00-11:15 2014-1426

Effects of vacuum mixing, water addition, and mixing time on the quality of fresh Chinese white noodlesRui LiuInstitute of Agro-Products Processing Science and Technology, Chinese Academy of Agricultural Sciences (CAAS), China

11:15-11:30 2014-0820

The Influence of different mechanical treatments on the nutritional value of corn kernelsShifang WangShanxi Agricultural University, Taigu County, China

11:30-11:45 0509-007

Comparison and evaluation of flavor characteristics between wild and pond-reared Chinese mitten crab (Eriocheirsinensis)Shuai WangShanghai Ocean University, China

11:45-12:00 2014-0145

Thermal analysis of comparative study of a new model for greenhouse tobacco dryingRicardo Oliano de CarvalhoFederal University of Pelotas, Brazil

08:30-08:45 2014-0040An appraisal of studies on food extrusionKehinde A. AdekolaJilin University, China

Professor - Food Engineering SGA - FSAA Université Laval Québec, Canada

08:45-09:00 2014-1353

Effects of plant and microbial proteases on the quality of hot-boned beef topsidesAladin BekhitUniversity of Otago, New Zealand

09:00-09:15 2014-0866

Modeling study of the temperature relation between the retort and cold spotJianwei ZhouZhejiang University, China

09:15-09:30 2014-1134

Evaluation of natural hog casings modified by surfactant solutions combined with lactic acid by response surface methodology and sausage performance stuffed in modified casing during immersion vacuum coolingChaohui FengUniversity College Dublin, Ireland

10:00-10:15 Tea Break

8. Packaging and Storage Technology

Time: 10:15-11:30Location: Room 402B, the 4th floor of CNCCModerator: Prof. Xiaobo Zou,

10:15-10:30 2014-1031

Analyses on thermal and mechanical properties of the vertical sealing roller in the four column quadrilateral sealing packing machineProf. Chuanmin YangTianjin University of Commerce, China

10:30-10:45 2014-1609

Renewable cold energy use for brown rice storage and rough rice storage in JapanShuso KawamuraHokkaido University, Japan

10:45-11:00 2014-1229

Effect of different storage temperature on respiration rate and marketable quality of sweet cornSheng LiuBeijing Vegetable Research Center, Beijing Academy ofAgriculture and Forestry Sciences, China

11:00-11:15 2014-0236

Effect of thermal and storage treatments on walnut paste quality associated with enzyme inactivationProf. Shaojin WangProfessor of Northwest A&F University, China

11:15-11:30 2014-1258

Effects of ascorbic acid-combined solution dipping on browning and quality of fresh-cut apple fruit pieces during storageHanxu PanChina Agricultural University, China

Prof. of School of Food & Biological Engineering, Jiangsu University, China

15:00-15:15 Tea Break

Time: 13:30-16:00Location: Room 402A, the 4th floor of CNCCModerators: Dr. Peeyush Soni, Asian Institute of Technology, Thailand Prof. Baohua Kong, Northeast Agricultural University, China

SEPTEMBER 18, 2014

THURSDAY AFTERNOON

13:30-16:00

13:30-13:45 2014-1487

The study of honey nectar source characterization pattern of based on differences in Aroma characteristicBolin ShiSub-Institute of Food and Agriculture, China NationalInstitute of Standardization, China

13:45-14:00 2014-1530Analysis and evaluation of Kiwifruit qualityLongsheng FuNorthwest A&F University, China

14:00-14:15 2014-1352

Optimization of cyanogens detoxification of flaxseed meal using a central composite design (CCD)Aladin BekhitFood Science Department, University of Otago, Dunedin, New Zealand;

14:15-14:30 2014-1436

Relationships between the thermal properties of raw materials and the textural properties of extruded texturized soybean proteinYingquan ZhangInstitute of Agro-Products Processing Science and Technology, Chinese Academy of Agricultural Sciences (CAAS), China

14:30-14:45 2014-0180

Model-based research for the risk and prediction of silage bale deterioration suffered from aerobic impactKerstin Helena JungbluthInstitute of Agricultural Engineering, Germany

14:45-15:00 2014-1479

Effects of glycan parts on the enzymatic coagulation of soybean proteinsGuangzhong LuanCollege of Food Science and Engineering of Northwest A&F University, China

15:15-15:30 2014-0321

The antioxidant capacity of Maillard reaction products formed by a porcine plasma protein hydrolysate-sugar model system as related to chemical characteristicsQian Liu, Northeast Agricultural University, ChinaNortheast Agricultural University, China

15:30-15:45 0506-005

Feasibility study on classifying different kinds of Chinese tea using Terahertz spectroscopyBin LiBeijing Research Center for Information Technology inAgriculture, China

15:45-16:00 2014-0210

Physical properties of rough, brown and white rice of Japonica, Indica and NERICA typesEdenio Olivares DiazHokkaido University, Japan

Time: 13:30-16:00Location: Room 401, the 4th floor of CNCCModerators: Prof. Bill A. Stout, Honorary President of CIGR, USA Prof. Yankun Peng, Prof. of China Agricultural University, China

13:30-13:45 2014-0550

Mapping of soluble solid content distribution in mulberry using near-infrared hyperspectral imagingYanru ZhaoCollege of Biosystems Engineering and Food Science, Zhejiang University, China

13:45-14:00 2014-0356

Emerging hyperspectral imaging for rapid and real-time monitoring of main spoilage bacteria in farmed salmon filletsHongju HeUniversity College Dublin, Ireland

14:00-14:15 2014-1451

Quantitative determination of the illegally added pigment green in tea by hyperspectral imaging technologyChanjun SunZhejiang University, China

14:15-14:30 2014-0456

Pixel based color detection technique for agricultural productsAbdullah BEYAZAnkara University, Agriculture Faculty, Department of Agricultural Machinery, 06130 , Aydınlıkevler Ankara. Turkey

14:30-14:45 2014-1311

Detection and quantification of chicken, horse and pork in minced beef using hyperspectral imagingMohammed KamruzzamanUniversity of Tokyo, Japan

15:00-15:15 Tea Break

14:45-15:00 2014-0050

Influence analysis of region of interest on apple sugar model by hyperspectral imagingZhiming GuoNational Engineering Research Center for Information Technologies in Agriculture, China

15:15-15:30 2014-0895

Application of visible and long-wave near infrared hyperspectral imaging for color measurement of grass carp (Ctenopharyngodonidella)Junhu ChengSouth China University of Technology, China

15:30-15:45 2014-0651

Design of open-carton molding device in full-automatic hot melt glue carton sealerShuxi TangChinese Academy of Agricultural mechanization Sciences, China

15:45-16:00 2014-1112

Research of healthy seedlings recognition technologyJianping HuKey Laboratory of Modern Agricultural Equipmentand Technology, Ministry of Education, Jiangsu University, China

SESSION VI

POSTER SESSIONS

SEPTEMBER 18, THURSDAY

08:30 - 12:00

Topic (1) Advanced food processing technologies

1 61-001 2014-0082Study on New Processing and Equipment of The Tonic Soup

Composite Seasoning

Han QinghuaChinese Academy of

Agricultural Mechanization Sciences, Beijing, China

2 61-002 2014-0299Study on the extraction, purification and antioxidant property of mucus

protein from Chinese yam

Li JianHarbin University of

CommerceChina

3 61-003 2014-0381 Research and Experiment on a New Technology for Flax Seed Husking

Cai ZhiyongChinese Academy of

4 61-004 2014-0607 Review of Buckwheat Shelling Equipment

Chen WeiInner Mongolia Agricultural

UniversityChina

5 61-005 2014-0732

The Optimization of The Processing Parameter of Resistant Starch From

Maize By Complex of Different Enzymatic Methods

Yao AolinCollege of Biological and Agricultural Engineering,

Jilin University, Changchun, Jilin , China

6 61-006 2014-0808 The Mechanical Properties of Walnut Impact Breaking Test

Chen LinCollege of Information

and Engineering Technology,Sichuan

7 61-007 2014-0834Study on Key Processing

Technology for Instant Shrimp of Litopenaeus Vannamei

Zhang YongshengOffice of Science of

Technology, Agricultural University of Hebei

8 61-008 2014-0907

The Influence of Expression of Two Transaminase Genes ARO8

and ARO9 on the 2-phenylethanol Transformation in Saccharomyces

Cerevisiae

Yin ShengSchool of Food and Chemical

Engineering, Beijing Technology & Business

University

Topic (2) Imaging and image processing

9 61-009 2014-0909

Enhancement of 2-phenylethanol Biosynthesis in Saccharomyces

Cerevisiae by Co-expression of the Transaminase Genes ARO8 and the

Decarboxylase Gene ARO10

Yin ShengSchool of Food and Chemical

Engineering, Beijing Technology & Business

University

10 61-010 2014-1242The Backward Extraction

Technology of Soybean Protein by AOT Reverse Micelles

Yang GuangshengCollege of Food Science and Technology，Henan University of Technology

11 62-001 2014-0048Application of Handheld-based Machine Vision Technology in Determining Banana Maturity

Liu YangtaiUniversity of Shanghai for Science and Technology

12 62-002 2014-0176A Multiple-Threshold Based Image Segmentation Method for Bananas

in Crate

Hu MenghanUniversity of Shanghai for Science and Technology

13 62-003 2014-0303

A Method of Nondestructive Detection and Analysis for Walnut

Internal Quality Based on X-ray CT Imaging

Zhou XuechengSouth China Agricultural

UniversityChina

14 62-004 2014-0526Peanuts Image Denoising Method

Based on Compressed Sensing Theory

Yu HainingDepartment of Mechanical and Electrical Engineering,

Qingdao Agricultural University

15 62-005 2014-1283Detection of Moldy Corn Using FT-

NIR Spectroscopy and Artificial Neural Networks

Yuan YingCollege of Engineering,

China Agriculture University

16 62-006 2014-1287Detection of Aspergillusflavus on Wheat Kernels Using FT-NIR and Factorial Discriminant Analysis

Zhao XinCollege of Engineering,

China Agriculture University

17 62-007 2014-1289

Fungal Detection in Maize Kernels Using FT-NIR Spectroscopy

Coupled with SIMCA and PLS-DA Methods

Chu XuanCollage of Engineering,

18 62-008 2014-1489

Continuous Field Monitoring and Intelligent Computation of Crop Growth based on Digital Image

Processing

Du JianjunBeijing Research Center

for Information Technology in Agriculture, Beijing

Academy of Agriculture and Forestry Sciences

19 62-009 2014-0646 Bruise Damage Stage Judgement Of Chinese Pear based on Histogram Zhou Shuiqin China

20 62-010 2014-1434

Effects of small amount of sodium carbonate on konjac glucomannan-

induced changes in starch nano-unit chains in gelatinization and

retrogradation processes

Zhou YunCollege of Food Science

and Nutritional Engineering, China Agricultural

University

Topic (3) Drying & bio-processing technology

21 63-001 0509-047

Research on Rapid Fermentation Parameters for Processing of

Combined Rice Seedling Substrates Tray Made by Agricultural Organic

Wastes

Zhao ZhongliangHeilongjiang Province

Agricultural Mechanical Engineering Research

Institute

Automatic Grading Machine for Kiwi

Zuo XingjianCollege of Mechanical and

Electronic Engineering, Northwest A&F University

23 63-003 0509-058Study on Controlled Freezing-point Drying and Character Analysis of

Carrot

Xue YamengInstitute of Food Science

and Engineering, University of Shanghai for Science and

Technology

24 63-004 0509-059Study on Microwave-vacuum

Drying of Carrot at Low Temperature

Xue YamengInstitute of Food Science

and Engineering, University of Shanghai for Science and

Technology

25 63-005 2014-0146 Drying Tomatoes in A Low Cost Tray Dryer

Ricardo Oliano de CarvalhoAgricultural Engineering

student; Federal University of Pelotas

Brazil

26 63-006 2014-0253Rice Drying Using Heat Pump

Dehumidifying System with Heat Pipe

Luo QiaojunGuangdong Institute of

Modern Agricultural Equipment

27 63-007 2014-0259 Grain Dryer Based on Heat Pump Dehumidifying

Luo QiaojunGuangdong Institute of

Modern Agricultural Equipment

28 63-008 2014-0277

Optimization of Hot air-microwave fluidized drying Conditions of

Lentinus edodes by Using Response Surface Methodology

Han QinghuaChinese Academy of

Agricultural Mechanization Science

29 63-009 2014-0297The Research Process of

Agricultural Products’ Microwave Drying Technology and Equipment

Lv WeiqiaoChinese Academy of

Agricultural Mechanization Science

30 63-010 2014-0499Heat Pump Drying Technology and Quality Comparison of Pericarpium

Citri Reticulatae

Gong LiGuangdong Agricultural

Machinery Research Institute

31 63-011 2014-0825Coproduction of Dried White

Radish and Juice by Vacuum Drying Method

Xue JingCollege of Mechanical Engineering, Tianjin

University of Science and Technology

32 63-012 2014-0827

Effect of Pretreatment by the Superheated Steam Jet Impingement Blanching on Drying Characteristics

and Red Pigment of Line Pepper

Zhang QianCollege of Mechanical and

Electric Engineering Shihezi University

33 63-013 2014-0889Influences of drying parameters on

drying duration of paddy rice in deep fixed-bed

Wang DanyangCollege of Engineering, Shenyang Agricultural

University

34 63-014 2014-0899

Experimental research on thin layer drying model verification and

optimization for paddy rice in a deep fixed-bed dryer

University

35 63-015 2014-0954prediction of drying indices for

paddy rice in a deep fixed-bed based on neural network

University

36 63-016 2014-1024 Drying Characteristics of Strawberries in Vacuum Dryer

Can ErtekinDepartment of Farm

Machinery, Faculty of Agricultural Engineering,

Akdeniz University

Turkey

37 63-017 2014-1035 Weibull Distribution for Modeling Drying of Areca Nut

Guo ShouzhiCollege of Mechanical and

Electronic Engineering, Shandong Agricultural

University

38 63-018 2014-1072Drying Characteristics of Green

Peas in a Fluidized Bed with Slotted Gas Distributor

Li ZhanyongCollege of Mechanical Engineering, Tianjin

University of Science and Technology

39 63-019 2014-1110 Air Impingement Drying Shrinkage Characteristics of Chinese Jujube

Lou ZhengInstitute of Agricultural

Product Processing, Chinese Academy of Agricultural

Engineering

40 63-020 2014-1237Optimization of Hot-air Drying Technical Parameters of Purple

Sweet Potato

Lv XiaorongCollege of Information & Engineering Technology,

Sichuan Agricultural University

41 63-021 0618-021Mass transfer simulation of sigillate

walnut (Juglans sigillata Dode) during convection drying

Yang WeiFaculty of Modern

Agriculture Engineering, Kunming University of Science and Technology

42 63-022 0618-097Design and Experiment of Horizontal Turntable Air

Impingement Dryer

Wang DongCollege of Engineering,

43 63-023 0519-016

Design, Fabrication and Evaluation of an Infrared – Assisted Vibratory

Bed Grain Dryer, a Case Study: Paddy Drying

Dariush ZareShiraz University Iran

44 63-024 0519-015

Optimization and Evaluation of a Microwave-AssistedFluidized

Bed Dryer with Exhaust Air Recirculating System:Case study,

Corn Drying

45 63-025 2014-0318 Modeling of Thin Layer Hot Air-Infrared Drying of Green Pea

Topic (4) Functional foods processing technology and evaluation

Topic (5) Functional foods processing technology and evaluation

46 64-001 0509-037

Investigation of the Solid-state Fermentation of Chinese Traditional Aromatic Vinegar During Summer

Hot Season

Zhu YaodiSchool of Food and

Biological Engineering, Jiangsu University

47 64-002 2014-0301 Functional study of star anise fennel essential oil

Liu NingHarbin University of

CommerceChina

48 64-003 2014-0806

Extraction and Antioxidant Activity of Polysaccharides from Ganoderma Lucidum Using Acidic Electrolyzed

Yan ZhengChinese Academy of

49 64-004 2014-1141

Influence of Pre-fermentation Cold Maceration Treatment and Cap

Management on Biogenic Amines in Cabernet Sauvignon Wines

Liu PeitongChina Agricultural

UniversityChina

50 64-005 0618-012The Isoflavone and Purine Changing of Soymilk During Fermentation by

Yeast Strains

Gan JingCollege of Food Science

and Nutritional Engineering, China Agricultural University

51 65-001 2014-0102An Offline Portable System Based on Dual-DSP for Nondestructive

Detection of Livestock Meat

Peng YankunChina Agricultural

University China

52 65-002 2014-0293

Quantitative determination of camellia oil adulterated with

soybean oil by Vis/NIR spectroscopy and chemometrics

Tong SunJiangxi Agricultural

UniversityChina

Topic (6) Novel agro-processing

53 65-003 2014-0410 Near Infrared Rapid Detection of Protein,Fat,Starch and Water in Rice

Yang SuxianHuazhong Agricultural

UniversityChina

54 65-004 2014-0953

Studies Of Quantitative Detection For The Concentration Of Ethanol-water Solution Using Portable Near-

infrared Raman Spectrometer

Zou XiaoboCollege of Food and

55 65-005 2014-1170Compositional Analysis of Fish Feed

Using Mid-infrared Spectroscopy and Chemometrics

Zhu FengleCollege of Biosystems Engineering and Food

56 65-006 2014-1250Moisture Content Detection of Corn

Ear by Bioelectrical Impedance Spectroscopy

Zhao PengfeiCollege of Information

and Electrical Engineering, China Agricultural

University

57 65-007 2014-1468An Improvement on Models of Pork

Quality Detection based on VIS/NIR Reflectance Spectroscopy

Peng YankunChina Agricultural

UniversityChina

58 65-008 0618-019Study of Non-destruction Detection Technology for Free Water Content

of Beef

Xu YangCollege of Engineering,

59 65-009 2014-0103A Potential Technique for Detection

of Foodborne Pathogens in Pork Meat Using Raman Spectroscopy

Tao FeifeiChina Agricultural

UniversityChina

60 66-001 2014-0023

Effect of Low-temperature Plasma Treatment on Maize (Zea mays Linn.) Seeds Germination and

Seedling

Shao ChangyongCollege of Engineering,

61 66-002 2014-0321

The Changes of Emulsify Properties of Soybean Protein Isolate Induced

by PH-shifting Combined with Heating Treatment

Liu QianNortheast Agricultural

UniversityChina

62 66-003 2014-0726 Biodiesel Production from Bovine Tallow

Ricardo Oliano de CarvalhoAgricultural Engineer,

Federal University of PelotasBrazil

63 66-004 2014-0807 Shelled Walnut Shell Gap Extrusion Parameter Optimization Agency

Chen LinCollege of Information and

Engineering Technology,Sichuan Agricultural University

64 66-005 2014-1185 Castor Seed Mechanical Properties for Shelling Machine

Hou JunmingDepartment of Engineering,

Shenyang Agricultural University

65 66-006 2014-1330

The Design and Parameter Optimization of Automatic Positioning

Mechanism for Automatic Injection System of Fry Vaccine

Liang RenghaoCollege of Biosystems Engineering and Food

66 66-007 2014-1404

Synergistic Effect of Thermal and Pulsed Electric Field Treatment on

the Permeability of Vesicles - A Cell Membrane Simulation

Liu ZhiweiCollege of Light Industry and Food Sciences, South

China University of Technology

67 66-008 2014-1430Expression and Characterization

of the Aspartokinase from Corynebacterium Pekinense E31

Ren JunCollege of Food Science

and Engineering, Jilin Agricultural University

68 66-009 0526-020 Utilisation of Rice Straw for Composite Panel Manufacturing

Luo PengCollege of Mechanical Engineering, Tianjin

University of Commerce

69 66-010 0618-070

On Ammonia Concentrations in Breeding Environments of Dairy

Houses Located in the Iblean Highlands

Giovanni CasconeUniversity of Catania,

Department of Agri-food and Environmental Systems

Management

70 66-011 2014-1345The Finite Element Simulation

and Optimization Design of Biodegradable Seedling Pot

Liu Xiangdong Jiamusi University China

Topic (7) Packaging & storage technology

71 67-001 2014-0278The Influence of Different Storage Conditions on The Dried Quality of

Lentinus Edodes

Han QinghuChina Agricultural

UniversityChina

72 67-002 2014-0653

Development and Validation of A Predictive Model to Describe The Effect of Carbon Dioxide on The

Growth of Listeria Monocytogenes in Fresh-cut Iceberg Lettuce Packaged

under Modified Atmospheres

Yin XiaotingNanjing Agricultural

UniversityChina

73 67-003 2014-1033Preparation , Micro-structure

and Mechanical Performance of Soybean-protein Film

Yang ChuanminSchool of Mechanical Engineering, Tianjin

74 67-004 2014-1122Optimization of composite

preservative on stewed duck esophagus

Xie ManmanSchool of Medical Instrument

and Food Engineering, University of Shanghai for Science and Technology

75 67-005 0618-099

Utilization of High Intensity Pulsed Electric Fields (PEF) as

an Unconventional Non Thermal Method of Liquid Food Preservation

Mohamed Hatem Cairo University Egypt

Topic (8) Postharvest handling and management

76 67-006 2014-1056

Study of Rheological Behavior of Soy Protein Spray Coating

Dispersions for Edible Vegetable-based Composite Paper

Hou HonghongSchool of Mechanical Engineering, Tianjin

77 67-007 2014-0592

Application of new sterilization technology in the storage and

transport of fruits and vegetables preservation

Zhang XinyuCollege of Engineering, South China Agriculture

University, Guangzhou, China

78 67-008 2014-0662

Using Comsol Multiphysics for the Evaluation of Liquid Food Thermal Steriliza-tion: Effect of Orientation

of Cylinder Cans

Wang LiangZhejiang University China

79 68-001 0519-005Effect of Chlorine Dioxide on Postharvest Storage Quality of

Agaricus Bisporus

Chen CunkunNational Engineering Technology Research

Center for Preservation of Agriculture Products

80 68-002 2014-0358On-line nondestructive inspecting

sugar content of orange using multi-spectral imaging

Liu MuhuaJiangxi Agricultural

UniversityChina

81 68-003 2014-0605

Relationship between Hyperspectral Imaging and Physiological and

Biochemical Properties during the Postharvest Decay of Strawberry

Sun YeNanjing Agricultural

UniversityChina

82 68-004 2014-0645The design of a device for online weight measuring and grading of

freshwater fish

Wang KundianCollege of Engineering,

Huazhong Agriculture UniversityChina

83 68-005 2014-0870Non-destructive Prediction

of Hardness of Carrots using Hyperspectral Imaging

Ye XujunFaculty of Agriculture and

Life Science, Hirosaki University

84 68-006 2014-0911

Comparison of Effects of Radiation UV-C on Post-harvest Disinfestation of Starfruit, Kumquat and Acerola

Infested by Fruit Fly (Diptera: Tephritidae)

Stella VieiraBiological Institute,

Experimental Center Researcher collaborator of School of Agricultural Engineering

Brazil

85 68-007 2014-1182

Study of Dynamic Discriminant Models of Huping Jujube Damage

Based on Visible/ Near Infrared Spectral

Wang BinCollege of Engineering,

Shanxi Agricultural University

86 68-008 2014-1220 Effect of Air Precooling on Quality of Apricot Fruit

Li JianBeijing Engineering and

Technology Research Center of Food Additives, Beijing Technology and Business

University

87 68-009 0618-098Using of Safety Environment

Essential Oil to Improve Quality and Storage Ability of Grapes

Mohamed HatemCairo University Egypt

88 68-010 0618-101

Effects of Postharvest Storage on Nutritional Quality of New

Mandarin Cultivars Grown in South Africa

Nazneen Barday Department of Horticultural

Science, Stellenbosch University

South Africa

89 68-011 2014-1396 A green physical refining process of olive oil with high acid value

Hu ShuzhenChinese Academy of

Topic (9) Quality measurement, modeling and control

90 69-001 0508-020

Evaluation Study of a Magnetic Nanoparticle Based Nucleic Acid

Isolation and Purification Instrument for DNA Extraction of E. Coli O157:

Chen YahuiMinistry of Agriculture,

91 69-002 2014-0098A Detection Method of Melamine Mixed Into Milk Powder Using Raman Scattering Spectroscopy

Zhao JuanChina Agricultural

UniversityChina

92 69-003 2014-0274 Thermal Properties of ‘Foie-gras’ Food Products

Cristina RattiDepartment of Soils

Sciences and Agro-Food Engineering, Université

Canada

93 69-004 2014-0320

The Influence of Physicochemical and Emulsifying Properties Induced

by Hydroxyl Radical-stressed Soybean Protein Isolate

Lu YanNortheast Agricultural

UniversityChina

94 69-005 2014-0351Hydrated Chia Seed Effect on Wheat

Flour and Bread Technological Quality

Ivan SvecInstitute of Chemical Technology in Prague

Czech Republic

95 69-006 2014-0353Primary Investigation on Cigarette

Classification Identification Based on Hyperspectral Imaging

Wu QiongShenyang Agricultural

UniversityChina

96 69-007 2014-0378Experimental Study on Friction

Characteristics of Caragana Korshinskii Kom

Liu XiaoShanxi Agricultural

UniversityChina

97 69-008 2014-0389Experimental Study on the

Rheological Properties of Caragana Korshinskii Materials

Kong lijuanCollege of Engineering,

agricultural engineering， Shanxi Agricultural

University

98 69-009 2014-0392Conventional Mechanical Properties of Solid Fuel Briquettes Made from

Caragana Korshinskii Kom

Cui RuixiaoShanxi Agricultural

UniversityChina

99 69-010 2014-0488

Application of Colorimetric Sensor Technology for Monitoring and Distinguishing of Predominant

Spoilage Bacteria in Pork

Zou XiaoboJiangsu university China

100 69-011 2014-0559Rapid Detection of Escherichia

coli on Vegetables based on Pattern Recognition

Ding YunEditorial department of Journal of Bionic

Engineering, Jilin University

101 69-012 2014-0567

The Effect of Abrupt Drops in Temperature on the Growth of

Pseudomonas Aeruginosa Single Cells

Wang XinSchool of Medical

Instrument and Food Engineering, University of Shanghai for Science and

Technology

102 69-013 2014-0814

Enhancement of The Cleanability of Milk Fouling on Highly Finished

Inner Surface of Stainless Steel Tubing

Ikko IharaDepartment of Agricultural

Engineering, Kobe University

103 69-014 2014-0841Effect of Carboxymethyl Cellulose

on Stabilization of Soy Protein Isolate Dispersion at Acid pH

Li XinxinSchool of Medical

Technology

104 69-015 2014-0843Research on Sterilization Method of Minced Fish Products to Prolong the

Shelf-life at Room Temperature

Ding YunEditorial department of Journal of Bionic

Engineering, Jilin University

105 69-016 2014-0935Effect of Enzymatic Hydrolysis on

Bioavailability of Corn Gluten Meals in Vivo

Jin JianSchool of Food and

106 69-017 2014-1086 Effect of Microwave Pretreatment on the Quality of Sesame Oil

Ju YangFood Science and

Engineering, Henan University of Technology

107 69-018 2014-1111

The Information Variation Feature and Discriminant Capabilities of Electronic Nose for Adulterated

Shi BolinSchool of Life Science,

Shanghai UniversityChina

108 69-019 2014-1191Penetration Depth of Near-

infrared Light in Small, Thin-skin Watermelon

Qian ManCollege of Mechanical and

Electronic Engineering, Northwest Agricultural and

Forestry University

109 69-020 2014-1309Study on Application Effects of Octacosanol in the Laying Hens

Peng KaiCollege of Engineering

, China Agricultural University

110 69-021 2014-1372

Simultaneous Quantitation of Organic Acids and Monosaccharides

by High-performance Liquid Chromatography

Lu XinInstitute of Agricultural

Processing, Henan Academy of Agricultural Sciences

111 69-022 2014-1401Study on the Effects of Dietary Components on Ferrous Sulfate

Absorption by Caco 2 cells

He YifanCollege of Food Science

University

112 69-023 2014-1432Study on the Effects of Hydrocolloids on Characteristics of Frozen Dough

and Quality of Bread

Wang XuanDepartment of Food Science

& Nutrition Engineering, China Agricultural

University

113 69-024 2014-1435

Cloning, Purification, Characterisation and Mutational

Analysis of Homoserine Dehydrogenase from

Corynebacterium Pekinense

Xu JinkunCollege of Food Science

and Engineering, Jilin Agricultural University

114 69-025 2014-1496Effect of Components of WPC Neutrase Hydrolysates on Iron

Uptake by Caco-2 Cells

Qian GaoCollege of Food Science

University

115 69-026 2014-1501 Evaluation of Nutrients During Fresh Rice Noodle Processing

Yang MengyanCollege of Food Science

& Nutritional Engineering, China Agricultural

University

116 69-027 2014-1623A Real-time Detection System of the

Pig Backfat Based on the Optical Image

Pang TianChina Agricultural

UniversityChina

117 69-028 2014-1626Research on Glycosylation and

Enzymatic Modification on Soybean Protein Allergies

Zhu TingweiCollege of Food Science and Technology, Henan

University of Technology

118 69-029 2014-1627Electrochemical Behavior of Rutin

on Graphene and Ionic Liquids Composite Film Modified Electrode

Wang HuiMinistry of Agriculture,

119 69-030 0618-065Optimization of Composite

Preservative on Stewed Duck Esophagus

Xie ManmanSchool of Medical

Technology

120 69-031 2014-0398

Correlation Study between Biomechanical Properties and Moisture Content of Fruits and

Vegetables

Feng HuiminShanxi Agricultural

UniversityChina

SESSION VII

INFORMATION SYSTEMS

Overview of Session VII: Information Systems

Monday, Sept. 15 08:00-20:00

Gate C2, CNCC

Tuesday, Sept. 16

10:00-10:10 Tea Break

13:30-15:00 1. Keynote Speeches Location: 309B, CNCC

15:00-15:15 Tea Break

19:00-21:00 Welcome Receiption Location:Plenary Hall A, CNCC

Wednesday, Sept. 17

10:00-10:15 Tea Break

12:00-13:30 Lunch Location: Plenary Hall A, CNCC

3. Agricultural Information

Sensing Location:

302B, CNCC

4. Precision Agriculture

and Intelligent Instrument Location:

408, CNCC

Special Session I

The 1st International Conference on

Smart Agriculture Innovative

DevelopmentLocation:

308, CNCC

(Please see attached sheets)

Special Session II

The 8th International Conference

on Computer & Computing

Technologies in AgricultureLocation:

407, CNCC(Please see attached

sheets)

15:00-15:15 Tea Break

3. Agricultural Information

Sensing Location:

302B, CNCC

4. Precision Agriculture

and Intelligent Instrument Location:

408, CNCC

Thursday, Sept. 18

5. Sensing and Traceability

for Quality and Safety of Agro-

products Location:

302B, CNCC

6. Computer Vision

and Image Processing

Location: 302A, CNCC

Special Session I

308, CNCC

Special Session II

sheets)

10:00-10:15 Tea Break

5. Sensing and Traceability

for Quality and Safety of Agro-

products Location:

302B, CNCC

6. Computer Vision

and Image Processing Location:

302A, CNCC

7. The Application of Mobile

Communication Terminal in the

Agricultural Informatics Location:

302B, CNCC

8. Decision Support

Systems and Artificial

IntelligenceLocation:

302A, CNCC

Special Session I

308, CNCC

Special Session II

sheets)15:00-15:15 Tea Break

7. The Application of Mobile

Communication Terminal in the

Agricultural Informatics Location:

302B, CNCC

8. Decision Support

Systems and Artificial

IntelligenceLocation:

302A, CNCC

16:00-17:00 Closing Ceremony Location: 309A+B, CNCC

19:00-21:00 Gala Dinner Location: Plenary Hall A, CNCC

SESSION VII, INFORMATION SYSTEMS

ORAL PRESENTATIONS

SEPTEMBER 16, 2014

TUESDAY AFTERNOON

13:30-17:001. Keynote Speeches

Location: Room 309B, the 3rd floor of CNCCChairs: Prof. Yibin Ying, Prof. Lalit Verma,

15:00-15:15 Tea Break

Location: Room 309B, the 3rd floor of CNCCChairs: Prof. Fedro S. Zazueta Ranaha,

Prof. Wanlin Gao,

13:30-14:00 0826-701

Innovation-driven thinking on the new generation ICT for agricultural modernization in ChinaProf. Maohua WangAcademician of Chinese Academy of Engineering, China

14:00-14:20 0826-702

IT in agriculture: a story of convergenceProf. Fedro S. Zazueta RanahaProfessor and Associate CIO of Office of Academic Technology, University of Florida, USA

14:20-14:40 0826-004

Information technology and agriculture – global challenges and opportunitiesProf. K. C. TingProfessor and Head of Department of Agricultural and Biological Engineering, University of Illinois at Urbana-Champaign, USA

14:40-15:00 2014-1169Crop sensing –technologies and applicationsProf. Naiqian ZhangKansas State University, USA

Assistant President and Professor of Zhejiang University, Chinaincoming President of American Society of Agricultural and Biological Engineers, USA

Professor and Associate CIO of Office of Academic Technology, University of Florida, USA

Dean of College of Information and Electrical Engineering of China Agricultural University, China

2. Keynote Speeches

Location: Room 309B, the 3rd floor of CNCCChairs: Prof. Daoliang Li,

Prof. Seishi Ninomiya,

SEPTEMBER 17, 2014

WEDNESDAY MORNING

08:30-12:00

15:20-15:40 0826-003Light scattering technology for food property and quality assessmentProf. Renfu LuMichigan State University, USA

15:40-16:00 0826-008

Precision farming: to meet the challenges of agricultureProf. Chunjiang ZhaoDirector and Chief Scientist of National Engineering Research Center for Information Technology in Agriculture, China

16:00-16:20 0826-709

From internet of things to smart agricultureProf. Nick SigrimisFounder and President of spinoff Geomations SA-“from research and innovation to Social Exploitation”, founder and first Chair of CIGR-ICT section, USA

16:20-16:40 0826-708Nano-biosensors for biodetection in agricultural and food systemsProf. Yanbin LiProfessor of Zhejiang University, China

16:40-17:00 0826-720Precision aerial application: Current and future trendsProf. Yubin LanUSDA-ARD, USA

08:30-08:50 0826-710

Machine intelligence and automations for improved productivity, food quality, and profitProf. Yang TaoProfessor of Department of Bioengineering, University of Maryland, USA

Director of EU-China Center for ICT in Agriculture, Professor of College of Information and Electrical Engineering, China Agricultural University, China

Professor of Institute of Sustainable Agro-Ecosystems, Graduate School of Agricultural and Life Sciences, University of Tokyo, Japan

08:50-09:10 0826-001

Key technologies of sensing and traceability for greenhouse productionProf. Suming ChenProfessor of Department of Bio-Industrial Mechatronics Engineering, National Taiwan University, Chinese Taipei

09:10-09:30 0826-712

Terahertz (THz) spectroscopy and its application in quality and safety evaluation of agro-productsProf. Yibin YingProfessor of Faculty of Agriculture, Life and Environment Sciences, Zhejiang University, China

09:30-09:50 0826-006

Precision agriculture, livestock and aquaculture for Asian food productionProf. Naoshi KondoProfessor of Graduate School of Agriculture, Kyoto University, Japan

10:00-10:15 Tea Break

Location: Room 309B, the 3rd floor of CNCCChair: Prof. Naoshi Kondo,

10:20-10:40 0826-002

ICT innovations for sustainable food productionProf. Seishi NinomiyaProfessor of Institute of Sustainable Agro-Ecosystems, Graduate School of Agricultural and Life Sciences, University of Tokyo, Japan

10:40-11:00 0826-715

Rural information network service status and prospectsProf. Wanlin GaoDean of College of Information and Electrical Engineering of China Agricultural University

11:00-11:20 2014-0471

Delivering knowledge and solutions at your fingertips: a look at mobile apps and development in agricultureDr. Jiannong XinJoint faculty member at Office of Information Technology and Department of Agricultural and Biological Engineering, Institute of Agricultural and Food Sciences, University of Florida, USA

11:20-11:40 0826-007

Challenges and the State of Art in Internet of Things in Aquaculture in ChinaProf. Daoliang LiDirector of EU-China Center for ICT in Agriculture, Professor of College of Information and Electrical Engineering, China Agricultural University, China

Professor of Graduate School of Agriculture, Kyoto University, Japan

11:40-12:00 2014-1610

Dielectric sensors in an automated facility for testing salt tolerance of irrigated field cropsProf. Gerritvan StratenEmeritus professor of Wageningen University, the Netherlands

3. Agricultural Information Sensing

Location: Room 302B, the 3rd floor of CNCCModerator: Prof. Nick Sigrimis,

SEPTEMBER 17, 2014

WEDNESDAY AFTERNOON

13:30-16:44

13:30-13:42 2014-0140

Monitoring of soil water content by an electromagnetic access tube sensorY. SunaUniversity of Bonn, Germany

13:42-13:54 2014-1041

A method of photosynthetic rate prediction of tomato plants under solar greenhouse conditionMan ZhangChina Agricultural University, China

13:54-14:06 0618-059

Information system for estimating geometry and thermo-mechanical properties of biological products for simulating the heat and water transport processes Jerzy WeresPoznan University of Life Sciences, Poland

14:06-14:18 2014-0655

Analysis of the evaluation method for the recognition algorithm for occluded tomatoes based on the idea of measurementRong XiangChina Jiliang University, China

14:18-14:30 2014-0095

Evaluation of different global navigation satellite systems and analyses of movement patterns of cattle on alpine pasturesJan MaxaBavarian State Research Centre for Agriculture, Germany

Instrumentation and Automation in the Ag.University of Athens, Greece

14:30-14:42 2014-1022

The calibration model and key technology in ion flux non-invasive measurement of living plants in situLin XueChina Agricultural University, China

14:42-14:54 2014-1286

Successive projections algorithm on spectral multivariable selection with different calibration methods for the rapidHailiang ZhangZhejiang University, China

15:00-15:15 Tea Break

Location: Room 302B, the 3rd floor of CNCCModerators: Prof. Renfu Lu, Professor of Michigan State University, USA Prof. Huanyu Jiang, Professor of School of Biosystems Engineering and Food

Science, Zhejiang University, China

15:20-15:32 2014-1276Study of multifactor environmental warning model in swine cultureZhenli CaoChina Agricultural University, China

15:32-15:44 0618-003

Temperature correction measurement model of soil nitrate nitrogen based on Ion Selective ElectrodeYing ZhuChina Agricultural University, China

15:44-15:56 2014-0495

The research of topsoil moisture measurement based on dielectric constant method Qiaoli WangBeijing Forestry University, China

15:56-16:08 2014-1138The research of ion flow detection system of plant on LabVIEWZiyang WangChina Agricultural University, China

16:08-16:20 2014-0998

Information SystemsDesign of Portable Multi-channel System for Physiological Signal AcquisitionTing Li China Agricultural University, China

15:00-15:15 Tea Break

Location: Room 408, the 4th floor of CNCCModerators: Prof. Gerritvan Straten,

4. Precision Agriculture and Intelligent Instrument

Location: Room 408, the 4th floor of CNCCModerator: Prof. Yang Tao, Professor of Department of Bioengineering, University of Maryland, USA

13:30-13:42 2014-1169Vehicle-based and handheld high-throughput phenotypersNaiqian ZhangKansas State University, USA

13:42-13:54 2014-0281The design and simulation of a novel gripper for the fruit picking robotFuzeng YangNorthwest A&F University, China

13:54-14:06 0509-034Scheduling model for cross-regional work of cotton-pickerNaiqian ZhangChina Agricultural University, China

14:06-14:18 0519-006

DBH and height measurement of trees based on a single scan of terrestrial laser scannerGaochao BuBeijing Forestry University, China

14:18-14:30 2014-1251

Detection of insect disease spots of processing tomato by LabVIEW VisionZhuqing DingShihezi University, China

14:30-14:42 0523-007Classification of greengrocery seeds based on near infrared spectroscopyJun SunJiangsu University, China

14:42-14:54 0509-035Design and development of biomechatronic productsShujun ZhangUniversity of Gloucestershire, United Kingdom

Professor of Emeritus professor of Wageningen University, the Netherlands

15:20-15:32 2014-0942

A study of a shock-absorbing for an agricultural-purposed front-end loader with an electrohydraulic directional valveJongwoo HaSeoul National university, Korea

15:32-15:44 2014-1225The application of intelligent robotic technique in agricultural fieldYaolun ZhangUniversity of Macau, Macau

15:44-15:56 2014-0399Tube stamp for mechanical intra-row individual plant weed controlFrederik LangsenkampUniversity of Applied Science Osnabrueck, Germany

15:56-16:08 2014-0241Development of a general-purpose electric field robotXiang YinShandong University of Technology, China

16:08-16:20 2014-0172

Intelligent control system of cluster multi-span photovoltaic greenhouseLiqing ZhaoQingdao Agricultural University, China

16:20-16:32 2014-0816

Cloud and IOT-based architecture and implementation of a greenhouse micro-climate management systemRuihua WeiTongji University, China

16:32-16:44 0526-013Sugarcane harvester cutter automatic control system designYiqi HuangGuangxi University, China

5. Sensing and Traceability for Quality and Safety of Agro-products

Location: Room 302B, the 3rd floor of CNCCModerator: Prof. Yanbin LI,

SEPTEMBER 18, 2014

THURSDAY MORNING

08:30-11:56

Professor of School of Biosystems Engineering and Food Science, Zhejiang University, China

08:30-08:42 2014-0114Advanced techniques for detecting nitrogen status in riceYubin LanUSDA-ARS, USA

08:42-08:54 2014-0582

NIR hyperspectral imaging for mapping of moisture content spatial distribution in tea buds during dehydrationKeqiang YuZhejiang University, China

08:54-09:06 2014-1028

Research on detection moisture of intact meat based on discrete LED wavelengthsLifeng FanChina Agricultural University, China

09:06-09:18 2014-0666Isolation of DNA from rice using silica-coated magnetic particlesLiu WangZhejiang University, China

09:18-09:30 2014-0962

Self-assembled monolayers-based impedance immunosensor for rapid etection of escherichia coli O157:H7 using screen-printed interdigitated microelectrodesZhanming LiZhejiang University, China

09:30-09:42 2014-0470

Rapidly quantitative determination of soluble solids in bottled vinegar based on nirs and pls methodShanshan YanShanxi Agricultural University, China

09:42-09:54 2014-0680

Research of automatic purification technology for the harvested raw shrimp based on GLCM and ID3Zihao LiuZhejiang University, China

10:00-10:15 Tea Break

Location: Room 302B, the 3rd floor of CNCCModerator: Prof. Yi-Chich Chiu, National Ilan University, Chinese Taipei

10:20-10:32 0826-719Ultrasensitive terahertz sensing of kanamycin sulfate with metamaterialLijuan XieZhejiang University, China

10:32-10:44 2014-0720

CyberGIS-enabled ConSEnT framework development for grain post-harvest loss prevention Tao LinUniversity of Illinois at Urbana-Champaign, USA

10:44-10:56 2014-1082

Research on pork freshness detection using electronic nose sensor array and feature optimization Ningzhi WangChina Agricultural University, China

10:56-11:08 2014-0308

Nondestructive discrimination of the lettuce varieties based on hyperspectral technology combined with characteristic wavelengths Jun SunJiangsu University, China

11:08-11:20 2014-0965

Feasibility study of Superfloc127 in Ion-Selective Electrode Based Soil Nitrate-nitrogen Rapid Detection Linan ZhangChina Agricultural University, China

11:20-11:32 2014-1023

Identification of data characteristics of plant stress responses based on dynamic monitoring of ion flux in vivo Lin XueChina Agricultural University, China

6. Computer Vision and Image Processing

Location: Room 302A, the 3rd Floor of CNCCModerators: Prof. Suming Chen,

Prof. Jian Wu,

08:30-08:42 2014-0818

Tomato yield mapping in green house using color image analysis and machine learning methodKyosuke YamamotoThe University of Tokyo, Japan

08:42-08:54 2014-0250

Precise in-situ measurement of pakchoi leaf area with an ad hoc machine vision based monitoring platformLiang GongShanghai Jiao Tong University, China

Professor of Department of Bio-Industrial Mechatronics Engineering, National Taiwan University, Chinese Taipei

Professor of School of Biosystems Engineering and Food Science, Zhejiang University, China

10:00-10:15 Tea Break

Location: Room 302A, the 3rd floor of CNCCModerator: Prof. Yubin Lan, USDA-ARS, USA Prof. Gang Liu, China Agricultural University, China

08:54-09:06 2014-1179Study of plant growth measurement based on embedded vision systemQiaoyu LiChina Agricultural University, China

09:06-09:18 2014-0256Blind image quality assessment using compact visual codebooksYan LongNorthwest A&F University, China

09:18-09:30 0508-004Grading system for tomato mechanized seedling based on machine visionSubo TianShenyang Agricultural University, China

09:30-09:42 2014-1152

Automatic detection of paddy rice flowering from time-series RGB images taken under outdoor environmentWei GuoThe University of Tokyo, Japan

10:20-10:32 2014-1414

Identification of cabbages and weeds in seedlings using spectral imagingWei DengBeijing Research Center for Information Technology in Agriculture, China

10:32-10:44 2014-1549

Study on detecting myzuspersicae infection of oilseed rape leaves using hyperspectral imaging technologyZaichun ZhuangZhejiang University, China

10:44-10:56 2014-1351Digital imaging technique to detect and count aphids in soybeansSreekala BajwaNorth Dakota State University, USA

10:56-11:08 2014-0504

Research on video flame detection of forest fire based on spatial-temporal featureMingming XuNanjing Forestry University, China

11:08-11:20 2014-0960

Classification of pest species using multi-class support vector machine and computer visionWenyong LiBeijing Research Center for Information Technology in Agriculture, China

7. The Application of Mobile Communication Terminal in the Agricultural Informatics

Location: Room 302B, the 3rd Floor of CNCCModerator: Prof. Jiannong Xin, Institute of Agricultural and Food Sciences, University of Florida, USA Dr. Tao Lin, University of Illinois at Urbana-Champaign, USA

SEPTEMBER 18, 2014

THURSDAY AFTERNOON

13:30-15:06

13:30-13:42 2014-0135

Research on remote identification of apple leaf disease based on Android platformMeijia WangNorthwest A&F University, China

13:42-13:54 2014-1066

Smartphone-based field disease recognition of wheat using Support Vector MachineWenjing LingChina Agricultural University, China

13:54-14:06 2014-0200Cloud services platform on modern livestock management and marketingQiubo XieGuangdong Institute of Modern Agricultural Equipment, China

14:06-14:18 2014-1269

Design and implementation of weixin public service platform for development & research center of china agricultural mechanizationQing DongChina Agricultural University, China

14:18-14:30 0508-006

Mobile terminal based accurate monitoring method for farm machinery operationCaicong WuPeking University, China

Champaign, USA

15:06- 16:00 Tea Break

8. Decision Support Systems and Artificial Intelligence

Location: Room 302A, the 3rd Floor of CNCCModerator: Prof. Ning Wang, Oklahoma State University, USA

SEPTEMBER 18, 2014

THURSDAY AFTERNOON

13:30-14:54

14:30-14:42 2014-0523

The monitoring system of aquaculture based on ZigBee and android and GPRSChenhu XuJiangsu University, China

14:42-14:54 2014-1062

Encrypted QR code creation and recognition system based on Android smartphone of egg tracingXiaolin ZhanChina Agricultural University, China

14:54-15:06 2014-0138

Research of birds song of He Chuan wetland monitoring system based on ARM and 3GJiachen RenNorthwest A&F University

13:30-13:42 2014-0631Development of a driving simulator for auto-guidance tractorXiongzhe HanSeoul National University, Korea

13:42-13:54 2014-1282Detection of porcine lame walk based on Star skeleton modelWeixing ZhuJiangsu University, China

13:54-14:06 0618-001Research on fuzzy control method of greenhouse temperatureHaoran ZhangChina Agricultural University, China

Prof. Hongxin Cao, Deputy Director of Research Professor of Institute of Agricultural Economics and Information, Jiangsu Academy of Agricultural Sciences, China

14:06-14:18 2014-0052

One multi-channel detection system for precision rapeseed drill performance based on time intervalsYouchun DingHuazhong Agricultural University, China

14:18-14:30 2014-0415

Air Inflation & Consumption Model of a Compressor-tank-ejector System for Tomato Robotic HarvestingJizhan LiuJiangsu University

14:30-14:42 2014-0056Research of UAV data processing applied in agricultureHaiyang YuBeijing agricultural information technology research center

14:42-14:54 2014-1083

Portunus trituberculatus larvae growth and development study and simulationMingzhu HaoNingbo University

SESSION VII, INFORMATION SYSTEMS

THE 1st INTERNATIONAL CONFERENCE ON SMART

AGRICULTURE INNOVATION DEVELOPMENT

(ICSaid 2014)

ORAL PRESENTATIONS

SEPTEMBER 17, 2014

WEDNESDAY AFTERNOON

13:30-17:00

1. Opening Ceremony

Location: Room 308, the 3rd floor of CNCC

Moderator: Prof. Wanlin Gao, Dean of College of Information and Electrical Engineering, China

Time Technical Presentations

13:30 – 13:40 Welcome speech from CAU

13:40 – 13:50 Greeting Address from Ministry of Science and Technology

13:50 – 14:00 Greetings Address from Ministry of Agriculture

14:00 – 14:10 Greetings Address from Ministry of Education

14:10 – 14:30 Prof. Maohua Wang

Academician of Chinese Academy of Engineering, China

14:30 – 15:00 GROUP PHOTO 15:00-15:15 Tea Break

2. Session I: Globalization and creation development on smart agriculture

Moderator: Prof. Wanlin Gao, Dean of College of Information and Electrical Engineering, China

15:15 – 15:45

Soil sensing for precision agriculture

Prof. Ken Sudduth

Ph.D, Research Agricultural Engineer, President of ISPA

15:45 – 16:00 Prof. Xiwen Luo

Academician of Chinese Academy of Engineering, China

16:00 – 16:15

Current status and future prospects for vehicle robotics

Prof. Noboru Noguchi

Ph.D, Professor, Member of Science Council of Japan (SCJ) Hokkaido

University, Japan

16:15 – 16:30

Prof. Chunjiang Zhao:

Ph.D, Professor, Director, National Engineering Research Center for

Information Technology in Agriculture (NERCITA), China

16:30 – 16:45

Prof. Yibin Ying

Professor of Faculty of Agriculture, Life and EnvironmentSciences, Zhejiang

University, China

16:45 – 17:00

Large–scale Wind and Photovoltaic Power Accommodation Based on the

Coordination Control of Load, Network and Generation

Prof. Weizhou Wang

3. Dinner (17:00-19:00)

ORAL PRESENTATIONS

SEPTEMBER 18, 2014

THURSDAY MORNING

08:30-12:00

1. Session II: Collaborative innovation and key technology on smart agriculture Part A

Location: Room 308, the 3rdfloor of CNCC

Moderator: Dr. Ning Wang, Ph.D, Professor, Department of Biological and Agricultural

Engineering, Kansas State University , USA

08:30 – 08:45

Research and application of WSN with active variable–period sampling in

agriculture

Prof. Liping Chen Ph.D, Professor, Director, National Research Center of Iintelligent Equipment for Agriculture (NRCIEA) , China

08:45 – 09:00

Technology innovation issues for smart agriculture

Prof. Qin Zhang Ph.D, Professor, Director, Center for Precision & Automated Agricultural Systems, Washington State University, USA

09:00 – 09:15 Prof. Wenju Yun Ph.D, Professor, China Agricultural University

09:15 – 09:30

Research Trends of ICT–based Smart Agriculture in Korea

Prof. Sun–OK Chung Ph.D, Associate Professor, Department Head, Department of Biosystems Machinery Engineering, Chungnam National University, ROK

09:30 – 09:45

Application of WSN in precision agriculture

Prof.Minzan Li Ph.D, Professor,Director, Key Laboratory of Modern Precision Agriculture System Integration Research, Ministry of Education, P.R. China (CAU)

09:45 – 10:00 Precision agriculture re–defined

Mr. Marc Vanacht Principal of AG Business Consultants, Consultant on Precision Agriculture, USA

10:00-10:15 Tea Break

2. Session II: Collaborative innovation and key technology on smart agriculture Part B

Moderator: Prof. Chunjiang Zhao, Director, National Engineering Research Center for

Information Technology in Agriculture (NERCITA)

10:15 – 10:30

A precise WSN system for managing CO2 fertilizer in greenhouse

Dr. Man Zhang

Ph.D, Associate Professor, Key Laboratory of Modern Precision Agriculture

System Integration Research, Ministry of Education, P.R. China (CAU)

10:30 – 10:45

The future of precision farming: Designing systems for the farm of

tomorrow

Prof. Samuel Wane

Senior Lecturer, Harper Adams University, UK

10:45 – 11:00

A New framework for automatic cotton foreign fiber detection by

computer vision

Dr. Zhenbo Li

Ph.D, Associate Professor, China Agricultural University

11:00 – 11:15

Non–destructive sensing technology in food and agricultural

applications – challenges and opportunities

Dr. Ning Wang

Ph.D, Professor, Department of Biological and Agricultural Engineering,

Kansas State University , USA

11:15 – 11:30

A Remote monitoring system Of aquaculture design based on android

and Zigbee

Prof. Xingqiao Liu

Professor, Jiangsu University

11:30 – 11:45

Advances in precision monitoring and control of animal production

environment

Prof. Linying Zhao

Ph.D, Professor, The Ohio State University, USA

11:45 – 12:00

Network computing in agriculture information system Dr. Haihui Zhang

Ph.D, Associate Professor, Vice Dean Northwest Agriculture & Forest

University (NAFU)

ORAL PRESENTATIONS

SEPTEMBER 18, 2014

THURSDAY AFTERNOON

13:30-16:00

1. Session III: Product Development and marketing on smart agriculture Part A

Moderator: Prof. Minzan Li, Ph.D, Professor,Director of Key Laboratory of Modern Precision

Agriculture System Integration Research, Ministry of Education

13:30 – 13:45

Application of GIS in the seed industry

Prof. Xiaodong Zhang Ph.D, Professor, Vice Dean of College of Electrical Engineering, China Agricultural University

13:45 – 14:00 Multifactor environmental warning model in swine culture

Prof. Ruizhi Sun Ph.D, Professor, China Agricultural University

14:00 – 14:15 The wisdom agriculture and intelligent agriculture in the China

Prof. Yifei Chen Ph.D, Professor, China Agricultural University

14:15 – 14:30 Distributed energy supply of agricultural information system

Dr. Tianjun Jing Ph.D, Assistant Professor, China Agricultural University

14:30–14:40 Hebi Agricultural SiliconValley, China

14:40–14:50 Tianjin Green Kenon Co. Ltd 14:50–15:00 National Modern Agricultural Demonstration Area in Hutubi, Xinjiang

15:00-15:15 Tea Break

2. Session III: Product Development and marketing on smart agriculture Part B

Moderator: Prof. Haijian Ye, Ph.D, Professor, Vice Dean of College of Electrical Engineering,

15:15–15:25 Internet of Things for Intelligent Manor in Lincang, Yunnan

15:25–15:35 National Modern Agriculture Park of Comprehensive Agricultural

Development in Baoshan, Yunnan 15:35–15:45 Yunnan Coffee Trading Center

3. Concluding Remarks and vision for the future (15:45-16:00)

Summarizer: Prof. Wanlin Gao, Dean of College of Information and Electrical Engineering, China

SESSION VII

POSTER SESSIONS

08:30 - 12:00

Topic (1) Sensing and traceability for quality and safety of agro-products

121 71-001 0508-021

Efficiency Evaluation of Magnetic Nanoparticles Separation using an Automatic Nucleic Acid Isolation

System

Qin JiangKey Laboratory of

Agricultural information acquisition technology, Ministry of Agriculture

Belgium

122 71-002 0509-009 Detecting Glucose in Honey Using Polymer-based Enzyme Biosensors

Fu YingchunCollege of Biosystems Engineering and Food

123 71-003 0526-029 Detection of the Contents of Winter Wheat Based on LVF

Zhao YongBeijing Research Center for Information Technology in

Agriculture

124 71-004 2014-0375

The Application of Variable Selection Methods in Model

Optimization for Assessing Sugar Content in Chestnut Using Near

Infrared Spectroscopy

Liu JieHuazhong Agricultural

UniversityChina

125 71-005 2014-0688

Technology Based on Multi-spectral Studies of Corn Nitrogen

Luo YuanliNortheast Agricultural

UniversityChina

126 71-006 2014-1010

Rapid Detection of Trace Chlorpyrifos Pesticide Residues

Based on Colorimetric Spectroscopy and SVM

Li WenMinistry of Education Key

Laboratory of Modern precision agricultureSystem Integration Research, China

127 71-007 2014-1011

A Review on Colorimetric Detection of Mercury in Water

Using Gold Nanoparticles

Wu QiongyanCollege of Information and

128 71-008 2014-1012

Study on the Optical Non-destructive Quality Detection Method of Mini-watermelon

Zhang DiDepartment of Signal and

Information Processing,China Arguriculture University

129 71-009 2014-1186

Maize Seeds Authenticity Identification using Near-Infrared Spectroscopy and Chemometrics

Jia ShiqiangCollege of Information

University

130 71-010 2014-1293

A Review on Magnetophoretic Immunoseparation

Lin JianhanAgricultural Information Acquisition Technology Key Lab of Ministry of

Agriculture of China, China Agricultural University

131 71-011 2014-1294

An Impedance Detector for Impedance Measurement and

Data Analysis of Interdigitated Array Microelectrode for Rapid

Detectionof Avian Influenza Virus

132 71-012 2014-1295

Development and Evaluation of a Nanoscale Magnetic Particle

Based Bioseparator for Specific Separation and Concentration of E

Coli O157:H7

133 71-013 2014-1400

Detection of the Contents of Winter Wheat Based on the Portable JDSU

Spectrometer

Zhao YongBeijing Research Center for Information Technology in

Agriculture

134 71-014 2014-1411

The Application of Infrared Thermography for Crop Detection

Li ZhenCollege of Information

Science and Technology, Agricultural University of

135 71-015 2014-1418

Study on Vegetable Freshness Detection Based on the Portable

LVF Spectrometer

Yu XiaoyingCollege of information science and technology,

Agricultural University of Hebei

136 71-016 2014-1419

Using Hyperspectral Imaging to Detect Predominant Lesion of Rice

Leaf Blast

Ma XuCollege of Engineering, South China Agricultural

University

137 71-017 2014-1601

Non-destructive Detection of Insect-infested Jujubes by Near-

infrared Diffuse Reflectance Spectroscopy

Zhan JingJingCollege of

Engineering,Shanxi Agricultural University

POSTER SESSIONS

13:30 – 17:00

Topic (2) Computer Vision and Image Processing

1 72-001 0519-002

Design of 3D High-resolution Camera Imaging Measurement System to Estimate the Yield of

Rice Plant

Zhang YuGraduate School of

Agricultural and Life Sciences, University of

2 72-002 0519-003The Application of Imaging

Sensing Technology for Precision Agriculture and Green Houses

Zhang YuGraduate School of

Agricultural and Life Sciences, University of Tokyo

3 72-003 0618-010

Simultaneous Measurement of Leaf Characteristics and Sclerotinia Lesion Area in

Brassica Napus Based on Image Processing

Lu WenchaoBeijing Research Center for Information Technology in

Agriculture

4 72-004 2014-0143

Experiment on Acquisition of The Navigation Information of

The Unmanned Rice Transplanter Based on Machine Vision

Chi DexiaShenyang agricultural

universityChina

5 72-005 2014-0600A Strawberry Harvesting End-

effector with Large Misalignment Tolerance Based on Visual Servoing

Wang Liang JuChina Agricultural

UniversityChina

6 72-006 2014-0650

Extraction and Test of Characteristic Signal for Dynamic

Sugarcane Node Based on Computer Vision

Tang ShuxiChinese Academy of

7 72-007 2014-0958Rice Flag Leaf Angle Detection

Method Based on Machine Vision and K-means

Zhai GuoDepartment of

Optoelectronic Engineering, Chongqing University

8 72-008 2014-1008

Research of Online Real Time Processing Model for

Fluorescence Image of Electrical Signal in Plant

Li JunCollege of Information

University

9 72-009 2014-1175Koi Tracking Strategy Based on Color Mixture Model Via

Camshift

Li ZhenboCollege of Information and

Electronic Engineering, China Agricultural University

10 72-010 2014-1177Pig Behavior Analysis System

Based on Video Tracking Technology

11 72-011 2014-1180Crab Tracking Using a Biological-

Limit-Based Camshift Guided Particle Filter

Electronic Engineering, China Agricultural

University

12 72-012 2014-1203Ripe Strawberry Fruit

Recognition and Positioning Based on Multi-source Images

Zang Li JiaoMinistry of Education,

13 72-013 2014-1221

Methods of Nondestructive Measurement for Kernel Weight of Maize Based on Multi-source

Image Fusion

Zhou JinhuiCollege of Information

University

14 72-014 2014-1259Study on Searching for Growth Point of Tomato Axillary bud Based on Image-Processing

Wang MengCollege of Biosystems Engineering and Food

15 72-015 2014-1277

Methods of Fast Nondestructive Measurement for Yield

Component Traits of Maize Based on Machine Vision

Zhou JinhuiCollege of Information

University

16 72-016 2014-1303Design Measurement Matrix

of Apple Image Based on Compressed Sensing

Xiao YingCollege of Information

and Electrical Engineering, China Agriculture

University

17 72-017 2014-1305Research on Apple Image Sparse Sampling Based on Compressed

Sensing

Xiao YingCollege of Information

University

18 72-018 2014-1325Study of Image Stitching and Wheat Leaf Extraction Using

UAV Based Multispectral Image

Li HanCollege of Information

University

19 72-019 2014-1368Estimation Nutrient Content

of Soils by Reflectance Spectroscopy

Hu GuotianMech. & Elect.

Engineering, Northwest A&F University

20 72-020 2014-1412Research on Localization Method of Overlapping Apples Based on

Maxima

Hu ChanliSchool of electrical

information engineering, Jiangsu university

21 72-021 2014-1506Research on Cotton Image

Segmentation and Extraction for Cotton-picking Robot

Guo HuiCollege of Mechanical and Traffic, Xinjiang

Agriculture University

22 72-022 2014-1579

Research on Online Achievement Display System Based upon

Image Mosaic for Agricultural Science and Technology

Tao HongyanCollege of Information

University

23 72-023 2014-1591

Cell Tray Seeding Quantity Estimation of Super Hybrid Rice Based on Machine Vision and BP

Neural Network

Tan SuiyanCollege of Science, Applied Physic Branch, South China

24 72-024 2014-1622

The research of morphological structure analysis of different mice livers based on three-dimensional reconstruction

Tian LijunCollege of Information

University

Topic (3) Agricultural Information Sensing

25 73-001 0509-040

A Service Granularity Optimization Design Method

for Soil Moisture Monitoring in Cloud Computing

Li ShuihuaInstitute of Agricultural Resources and Regional

Planning, Chinese Academy of Agricultural

Sciences

26 73-002 0618-002

Research on Control Methods of Greenhouse Production System

based on Environment-crop Model

Chen LijunCollege of Information

University

Belgium

27 73-003 0618-004The Development of Greenhouse Environment Temperature Data

Collector

Liu KunCollege of Information

University

28 73-004 0618-005Wireless Remote Measurement

System of Greenhouse Environment

Liu YingCollege of Information

and Electrical Engineering, China Agricultural University

29 73-005 0618-006Soil Nitrate-nitrogen

Measurement System based on C805Land and WaterF020

Cao ShushuDepartment of Electronic Engineering ,College of

Information and Electrical Engineering, China

30 73-006 0618-007

Design and Implementation of Wireless Sensor Network Nodes

in Greenhouse environment Monitoring

Chen SiqiDepartment of Electronic

Engineering, China Agricultural University

31 73-007 0618-026 Pyrolysis characteristics and kinetics of Phoenix tree residues

Liu LeDepartment of Engineering,

32 73-008 2014-0120Integrated Sensor System for Rice

Conditions Monitoring Based UGV

Lan YubinSouth China Agricultural

University, Key Laboratory of Key Technology on

Agricultural Machine and Equipment

United States

33 73-009 2014-0199

Intelligent Monitoring and Scheduling Management

Information System of Lingnan Characteristic Fruits

Guo PeipeiGuangzhou Jiankun Network Technology

Development Co., Ltd

34 73-010 2014-0316

Study on Nondestructive Monitoring Technology of

Drought Stress Information in the Wheat Seedling Stage

Wu Qiong Shengyang Agricuture University, College of

Information and Eletrical Engineering

35 73-011 2014-0394

The Application of Small Unmanned Aerial Systems for Remote Sensing and Scientific

Research: A Review

Yu ShanshanNanjing Agricultural

UniversityChina

36 73-012 2014-0395Classified Aassessment of Chinese

Commercial Manure Composts Using Near Infrared Spectroscopy

Huang GuanqunChina Agricultural

UniversityChina

37 73-013 2014-0599A Low Altitude Remote Sensing

Platform for Small Scale Agricultural Land Investigation

Su BaofengCollege of Mechanical and

Electronic Engineering, Northwest A&F University,

Yangling

38 73-014 2014-0676

Research on Monitoring System for Edible Fungi Cultivation

Environment Based on ZigBee Technology

Gao BaihuiNortheast Agricultural

UniversityChina

39 73-015 2014-0689Study on Farmland Irrigation

Remote Monitoring System Based on ZigBee

Li JiaoNortheast Agricultural

UniversityChina

40 73-016 2014-0877

On-site Measurement Cadmium and Lead in Soil Using a

Disposable Bismuth/Ionic Liquid Modified Electrochemical Sensor

Wang Zhiqiang,Key Lab of Modern

Precision Agriculture System Integration

Research, Ministry of Education of China, China

41 73-017 2014-0966Modeling of Influences on ISE-based Soil Slurry Measurement

Using Response Surface Analysis

Pan PuKey Laboratory of Modern

42 73-018 2014-1013Design of Crop Water Monitoring

System Based on Multi-sensor and Physiological State

Wang YongqianCollege of Information

43 73-019 2014-1043A WSN System for Monitoring Environment and Crop Growth Information in Grassy Ranch

Zhan ManKey Laboratory of Modern

Precision Agriculture System Integration Research, Ministry of Education, China

44 73-020 2014-1085Research on Electrical Resistivity

Tomography for Mapping the Root Zone in Soil

Wang ZhijieCollege of Information

University

45 73-021 2014-1108The Network Connectivity of

Wireless Sensor Networks under the Environment of Farmland

Chen YangCollege of Information and Electrical Engineering，

46 73-022 2014-1322

Regression-assisting with External Variable for Predicting

Soil Organic Matter in a Complex Terrain Zone

Ye HuichunKey laboratory of Digital Earth Science, Institute of

Remote Sensing and Digital Earth, Chinese Academy of Sciences, Beijing 100094,

47 73-023 2014-1407

Application of Artificial Neural Network in Soil Available

Potassium Monitoring using a Dual-sensor System

Zhang MiaoKey Laboratory on Modern

Research of Ministry of Education, China

Topic (4) Precision Agriculture and Intelligent Instrument

48 74-001 0519-008

Research of Radio Channel Model Oriented to Agricultural

Greenhouse Wireless Sensor Network

Yang GuangyouAgricultural Machinery

Institute, Hubei University of Technology

49 74-002 2014-0156Headland Turning Control Method

of Autonomous Agricultural Machine

Huang PeichenSouth China Agricultural

UniversityChina

50 74-003 2014-0265 A Multi-robot Following System Based on Stereovision

Yang FuzengNorthwest A&F Universit China

51 74-004 2014-0271Research and Design of

Agricultural Multi-robot Wireless Communication Platform

52 74-005 2014-0272Research on Agricultural Robot Platform and Control System

Design

53 74-006 2014-0314Propagation Characteristics of Rradio Wave in Plastic

Greenhouse

Wang JizhangJiangsu University China

54 74-007 2014-0349Intelligent Facilities Fishpond

Design of Breeding Schizothorax Prenanti

Zou ZhiyongSichuan Agricultural

UniversityChina

55 74-008 2014-0425 Automatic Navigation System Research for Rice Planter

Wei LiguoChinese Academy of

56 74-009 2014-0534

Network Information Technology-based Information Service Platform of Agricultural

Machinery

Liu YangchunChinese Academy of

Agricultural Mechanization Sciences, Beijing 100083,

57 74-010 2014-0541

Sliding-Mode Variable-Structure Control of Agricultural machinery

Based On Exact Feedback Linearization

Bai XiaopingKey laboratory of Industrial

Informatics, Shenyang Institute of Automation

Chinese Academy of Sciences, Shenyang

110016, China

58 74-011 2014-0579 Research on Fuzzy Self-adjusting PID for Quadrocopter

Liu HaopengCollege of Engineering

& Technology, Huazhong Agricultural University, Wuhan, Hubei, 430070,

P.R.China

59 74-012 2014-0829 Design of a Portable Detector for Soil Organic Matter Measurement

Niu Yaliang Shanxi Agricultural

UniversityChina

60 74-013 2014-0855

Design and Experiment of A Vegetable Grafting Machine Operated by One Person for Cucurbitaceous Seedlings Cultivated in Humus Pots

Chu JiaCollege of Engineering,

61 74-014 2014-0964Design of a Soil Macronutrient Detection Platform Based On Fluidic Control Technology

Ren HaiyanKey Laboratory on Modern

Research of Ministry of Education, China

62 74-015 2014-0998Design of Portable Multi-channel System for Physiological Signal

Acquisition

Li TingCollege of Information and Electrical Engineering，

China Agricultural University, Beijing 100083,

63 74-016 2014-1042

Detection Algorithm of Crop Baseline for Off-road Vehicle

Based on Boundary Detection and Scan-filter

Zhan ManKey Laboratory of Modern

64 74-017 2014-1092An Automation System for Oestrus Detection in Group

Housed Sows

Zhang HaoCollege of Information

University

65 74-018 2014-1105 Research of Self-learning Navigation Patrol Robot System

Xu BoDepartment of Mechatronic

Engineering, College of Engineering, China

66 74-019 2014-1107 The Measure Method of Steering Angle for Agricultural Vehicle

Zhang ZhigangKey Laboratory of Key

Technology on Agricultural Machinery and Equipment,

Ministry of Education, South China Agricultural

University

67 74-020 2014-1116

Research Status and Prospects of Cleaning Loss Detection Technology On Harvesting

Machine

Wang SuzhenNanjing research

institute for agriculture Mechanization, Ministry of

Agriculture

68 74-021 2014-1127

Development of Glass Microelectrodes Pipette Puller

Based on Monitoring and Controlling Heating Strength

Wang YuanCollege of Information and Electrical Engineering，

69 74-022 2014-1347

Discrimination of Phosphorus in Lettuce using VIS-NIR

Spectroscopy Combined with Characteristic Variables Selection and Extreme Learning Machine

Gao HongyanKey Laboratory of Modern

Agricultural Equipment and Technology, Ministry of Education & Jiangsu

70 74-023 2014-1422 An Approach to Crop Location for Robotic Intra-row Weeding

Li NanCollege of Engineering,

71 74-024 2014-1541Design of Navigation Monitoring

Software Based on WinCE for Agricultural Vehicle

Zhang YajiaoEngineering College,

South China Agricultural University, Guangzhou

510642, China

72 74-025 2014-1577 Research and Design of a Pig Farm Management System

Dong ZhiwenCollege of Information

and Electrical Engineering, China Agricultual

University

73 74-026 2014-0201Defining Fertilization

Formulations (N-P-K) for Crops Using A Computer Application

Arturo Chong Eslava Autonomous University of

ChapingoMexico

Topic (5) Decision Support Systems and Artificial Intelligence

74 75-001 0509-001Research on Intelligent

Greenhouse Remote Control System Based on VC++ 6.0

Wang JunCollege of Biological and Agricultural Engineering,

Jilin University

75 75-002 0514-001Simulation of Temperature Model and Energy Management for Solar

Greenhouse

Li LiKey Laboratory on Modern Precision Agriculture System

Integration Research of Ministry of Education, China

76 75-003 0514-012

Management of Agricultural Plastic Waste Fluxes by Means of Specifically Designed Information

System

Evelia SchettiniDepartment of Agricultural and Environmental Science DISAAT – University of Bari

77 75-004 2014-0034

Analysis of Calves Feed Intake and Rumen Growth Based on

Process Date of A Multi Sensor Feeding System

Viktoria EhrlTechnische Universitaet Muenchen, Agricultural

Systems Engineering

Germany

78 75-005 2014-0330

Research of the Early Warning Model of the Facility Agriculture

Disease and Insect Based on Rough Neural Network

Wang DengweiNational Engineering Research Center for

Information Technology in Agriculture

79 75-006 2014-0608Research on Augmented Reality Plant Growth Simulation Method

Based on NyARToolkit

Zhao PengfeiNational Engineering Research Center for

80 75-007 2014-0979Error Analysis and Correction

Method for Automatic Monitoring Data of Soil Moisture

Hao Xingyao National Engineering Research Center for

81 75-008 2014-1006

Multimedia Training System Based on the Gesture-recognition

Operation and User Behavior Analysis

Tian YuxuanCollege of Information and

Electronic Engineering, China Agricultural

University

82 75-009 2014-1019

The Measurement of Liquid viscous Coefficient Based on the Metal Induction Falling Sphere

Method

Lu WeiCollege of Engineering,

83 75-010 2014-1021The Diagnosis Method of the

Corn's Water Shortage Based on the Vibration Information

Lu WeiCollege of Engineering,

84 75-011 2014-1045The Fault Diagnosis Expert System for the IOT in the

Aquaculture

ChenYingyiCollege of information and

Electrical Engineering, China Agricultural

University

85 75-012 2014-1046Quick and Automatic Generation Method for the Evaluation Report

of the Small Hydro Project

ChenYingyiCollege of information and

Electrical Engineering, China Agricultural University, Bejing

100083，P.R. China

86 75-013 2014-1047

Focused Crawler-Based Smart Push Technology for Market

Information of Ten agricultural Industry Platform

Chen YingyiCollege of information and

Electrical Engineering, China Agricultural University, Bejing

100083，P.R.China

87 75-014 2014-1048

The Simulation System for Ecosystem of Fish-Vegetable Mutualism Based on Discrete

Algorithm

University,

88 75-015 2014-1049

Design and Implementation of the Management and Evaluation System for Small Hydropower

Substitute Fuel Project

Chen YingyiCollege of Information

University

89 75-016 2014-1050

A Feeding Mathematical Model to Estimate Feeding Requirement of Fugu Rubripes (Temmincket

Schlegel)

University

90 75-017 2014-1051

Aquaculture Access Control Model in Intelligent Monitoring and Management System Based

on Group/Role

ChenYingyiCollege of Information

University

91 75-018 2014-1176Design and Implementation of

Monitoring System of Agricultural Prices

Li ZhenboCollege of Information

University

92 75-019 2014-1265An Intelligent and Accurate

GNSS-controlled Land Leveling System and Related Experiments

Li XiaoKey Laboratory of Modern

Precision Agriculture System Integration Research, Ministry of Education China

93 75-020 2014-1270

Research on Power Quality Monitoring and Evaluation

System Based on OSGi Framework

Gao Wanlin College of Information

University

94 75-021 2014-1288The Realization of Real-time

Navigation Technology in GNSS-controlled Land Leveling System

Wang YanKey Laboratory for Modern

95 75-022 2014-1327Healthy Mouse: a New Method of Monitoring Human Physiological Signs Information in Real Time

Sun Ping College of Information

University

96 75-023 2014-1433Research and Design of Programming problem

Automatically Evaluation System

Li Jing College of Information

University

97 75-024 2014-1525Research and Application on Slope Land Leveling Method

Based on GNSS

Liu GangKey Laboratory of Modern

Precision Agriculture System Integration Research, Ministry

of Education China Agricultural University

98 75-025 2014-1574Research on Investment and

Financing Ways for Agricultural High and New Technology

Wang ShuanglingCollege of Information

University

99 75-026 2014-1575

Research on Personalized Achievement Recommendation System for Agricultural Science

and Technology

Tao HongyanCollege of Information

University

100 75-027 2014-1580

Research on Online Evaluation System for Technology

Perspectivein Agricultural Science and Technology Achievements

Wang ShuanglingCollege of Information

University

101 75-028 2014-1620Tracking and Positioning

Technology for Free-range Livestock

Lei HongzhouCollege of Information

University

102 75-029 2014-1633

Online Assessment System：A New Approach to Evaluating

Agricultural Technological Achievements

Ren YanzhaoCollege of Information

University

Topic (6) The Application of Mobile Communication Terminal in the Agricultural Informatics

103 76-001 0618-058

The solution of agricultural products traceability system

based on the Internet of things technology and cloud computing

platform

Lu ChanghuaInstitute of Veterinary

Medicine, Jiangsu Academy of Agricultural Sciences, Key

Laboratory of Veterinary Biologicals engineering

and technology, Ministry of Agriculture, National Center for Engineering Research of

Veterinary Bio-products

104 76-002 2014-0593

Supply Chain Traceability System Platform Development about

Agricultural Products Based on NFC

Sun XuKey Laboratory of Bionic Engineering of Ministry of Education Jilin University,

Changchun Jilin China

105 76-003 2014-0957

Rapid Non-destructive Measurement of Wheat Spike Characteritics Using Android

Smartphone

Lu WenchaoBeijing Research Center for Information Technology in

Agriculture

106 76-004 2014-1009Research on Identification

Technology of Chinese-sensible Code Based on Smart Phone

Guo HaitaoCollege of Information and

107 76-005 2014-1030 QoE-aware Smartphone-based Surveillance Video Transmission

Ling WenjingCollege of Information

University

108 76-006 2014-1188The Research of Massive Data Processing of the Internet of

Things on Livestock and Poultry

Chen NanxinCollege of Information

University

109 76-007 2014-1195Big Data: Challenges and

Opportunities for Smart Grids and Smart Meters

Gao WanlinCollege of Information

110 76-008 2014-1312 Mobile Health Sensing Ubiquitous Service : System and Pattern

Sun WenxiaCollege of Information

University

111 76-009 2014-1324

Intelligent Farm for Relaxation Based on Internet of Things:

Management System and Service Mode

Yu LinaCollege of Information

University

112 76-010 2014-1326

A Content Management System Which is Based on

SOA Architecture and Can Be Customized

Wang ShiqiangCollege of Information

and Electrical Engineering,China

113 76-011 2014-1329An Idea to Capture the Big Data

on the Area of Nutrition and Health based on Data Capture

Sun PingpingCollege of Information

and Electrical Engineering,China

114 76-012 2014-1390An Approach to Online Document

Management for Information Resources

Wang JieCollege of Information

University

115 76-013 2014-1391

Mobile Psychology Sensing Expert System: A New Way to

Make Psychology Accessible to Chinese People

Sun WenxiaCollege of Information

University

116 76-014 2014-1392

An On-line Intelligent Measurement Terminal of Live

Pigs’ Backfat Thickness Based on Ultrasonic

Luo XuanCollege of Information

University

117 76-015 2014-1393Research and Development on

WBAN’s Vital Signs Monitoring Device

Su YuCollege of Information

University

118 76-016 2014-1477OFIS Data Exchange Platform

for Interaction with Agricultural Information Systems

Kim, JoonYongDepartment of Biosystems

Engineering, Seoul National University

119 76-017 2014-1542

Research and Implementation on Online Evaluation System for

Achievements in Agricultural Science and Technology

Jin YanyunCollege of Information

University

120 76-018 2014-1551An Acoustic Signal Acquisition

and Processing System Based on LabVIEW

Han MengCollege of Information

University

121 76-019 2014-1553

Based on the Study on the Agricultural Technology Service

of Network Technology and Discussion

Zhao LongInformation system

integration research and development center, China

agricultural university

122 76-020 2014-1555Agricultural Expert Network

Technology Research and Discussion on Service Delivery

Xin CuihongDepartment of Engineering,

123 76-021 2014-1557

Research and Implementation of Agricultural Science and

Technology Achievements Online Management

Gao ZhengDepartment of Engineering,

124 76-022 2014-1564

Research and Discussion on Agricultural Information Service

Modes Based on Network Technology

Shi KaiteCollege of Information

University

125 76-023 2014-1568

Research and Implementation of the Investment and Financing System Based on Agricultural

Science and Technology Network

Gao YujiaDepartment of Engineering,

126 76-024 2014-1571

Study On Industry-University-Research Collaboration Mode

Based On Network Technology In Agriculture

Wang ShuhuiCollege of Information

University

127 76-025 2014-1572Study and Discuss on the

Agricultural Trading Service Based on Network Technology

Gao WanlinDepartment of Engineering,

128 76-026 2014-1573

Research and Implementation of Agricultural Technology Supply And Demand Docking Services

System Based on Network Technology

Gao WanlinDepartment of Engineering,

129 76-027 2014-1634Study on Water Resources

Professional Softwaredevelopment in Cloud Computing Environment

Jiang XinlanCollege of Information

University

SESSION VIII

AGRICULTURAL MACHINERY STANDARDIZATION

Monday, Sept. 15 08:00-20:00

Registration Location:the open place on the 1st floor near the

Delegates Access Gate C2, CNCC

Tuesday, Sept. 16

10:00-10:10 Tea Break

13:30-15:00 1. Keynote Speeches Location: 302B,CNCC

15:00-15:15 Tea Break

15:15-17:15 1. Keynote Speeches Location: 302B,CNCC

Wednesday, Sept. 17

Technical Presentation Location: 302B,CNCC

10:00-10:15 Tea Break

Technical Presentation Location: 302B,CNCC

Thursday, Sept. 1816:00-17:00 Closing Ceremony

Location:309A+B, CNCC

Overview of Session VIII: Agricultural Machinery Standardization

OPENING CEREMONY OF SESSION VIII,

AGRCULTURAL MACHINERY STANDARDIZATION

18TH WORLD CONGRES OF CIGR

ORAL PRESENTATIONS

SEPTEMBER 16, 2014

TUESDAY AFTERNOON

13:30-17:15

Location: Room 302B, the 3rd floor of CNCCChair: Prof. Xiansheng Zhang,

13:30-14:00 Opening speech by Prof. Xiansheng Zhang

Keynote Speeches

14:00-14:30 0826-801Mutual recognition of internationalization of agricultural machinery Mr. Darrin DrollingerAmerican Society of Agricultural and Biological Engineers, USA

14:30-15:00 0826-802

The growing importance of regulations on crop protection equipment and the role of standards the case of EuropeMr. Jean-Christophe RousseauBerthoud, France

15:00-15:15 Tea Break

Location: Room 302B, the 3rd floor of CNCCChair: Mr. Darrin Drollinger,

15:15-15:45 0826-803Chinese agricultural machinery mechanization Prof. Xiansheng ZhangChinese Academy of Agricultural Mechanization Science, China

15:45-16:15 0826-804Building a performance based approachMr. Randall Joseph RenzeJohn Deere, USA

Assistant President of Chinese Academy of Agricultural Mechanization Sciences, China

Executive Diretor of American Society of Agriculturaland Biological Engineers, USA

SEPTEMBER 17, 2014

WEDNESDAY MORNING

08:30-12:00Technical Presentations

Location: Room 302B, the 3rd Floor of CNCCChair: Mr. Darrin Drollinger,

16:15-16:45 0826-805Tailoring in international standardsMr. Eric B SmithJohn Deere, USA

16:45-17:15 0826-806Combination of standardization and testing in agricultural machinery Mr. Ibrahim SalehMacDon Industries, Canada

08:30-08:50 2014-0609

Parameter optimization of corn ear vertical drying based on the BP neural network and genetic algorithm Wuyun ZhaoGansu Agricultural University, China

08:50-09:10 2014-1332

Experimental study on constant pressure control based on PWM variable spray Jiachen ZhangBeijing Research Center for Information Technology in Agriculture, China

09:10-09:30 2014-0255Effect of soil parameters on performance of tillage machinesMehrez basharSouth China Agricultural University

09:30-09:50 2014-0457

Hydro-mechanical transmit performance analysis for a continuously variable transmissionLiang HeNanjing Agricultural University, China

10:00-10:15 Tea Break

Location: Room 302B, the 3rd Floor of CNCCModerator: Mr. Xiansheng Zhang,

10:15-10:35 2014-0544

Modeling agricultural tractor motion on sloping ground considering longitudinal and lateral gradientsZhen LiKyushu University, Japan

Executive Director of American Society of Agricultural and Biological Engineers, USA

Assistant President of Chinese Academy of Agricultural Mechanization Sciences, Beijing, China.

10:35-10:55 2014-0197

The simulation study of vehicle Hydro-Mechanical continuously variable transmission test based on AVLJiangguo Xi

Henan University of Science and technology, China

10:55-11:15 0618-030Investigation on vibration characteristic of hand tractorSovatna PhonKyushu University, Japan

11:15-11:35 2014-0898

Vertical vibration measurement of the operator seat in an agricultural tractorTheodoros A. GialamasTechnological Educational Institute of Thessaly, Greece

11:35-11:55 2014-0192Sensor controlled crop compaction in case of silage bagging Gerd-Christian MaackInstitut für Landtechnik University of Bonn, Germany

SESSION VIII

POSTER SESSIONS

13:30 - 17:00Topic (1) Safety, Energy, Saving and Emission of Agricultural Machinery

Topic (2) Standardization and Combination of Agronomics and Agricultural Machinery

Topic (3) Combination of Standardization and Testing in Agricultural Machinery

123 81-001 2014-1605Institutional Obstacles for

Standardization in China : A Case Study for Agricultural Machinery

Huang Caijin China Agricultural Machinery Testing

Center

124 81-002 2014-0734High Dynamic Control of A Permanent-

magnet Synchronous Motor for Agricultural Electric Vehicles

Ji JinghuaSchool of Electrical

and Information Engineering, Jiangsu University, Zhenjiang

125 81-003 2014-0502Resistance power experiment study for excavating-shovel of corn root stubble

excavating and placement harvester

Yu YonghongJiamusi University China

NO. Poster # Paper # Paper Title Name & Institution Country

126 82-001 2014-1130 Design and Experiment of Pneumatic Precision Millet Seed-metering Device

Zhao XiaoshunCollege of Mechanical

and Electrical Engineering,

Agricultural University of Hebei

127 83-001 2014-0024

Stability and Reliability Analysis of Valve-Controlling Hydraulic Power

System for Flexible Pesticide Sprayer Chassis

Zhang HuaCollege of Mechanical

and Electronic Engineering, Nanjing Forestry University

128 83-002 2014-0725The Research of Getting Ecological

Hydraulic Circuits of Agricultural and Forestry Tractors

Tkac ZdenkoDepartment of Transport and

Handling, Faculty of Engineering,

Slovak University of Agriculture in Nitra,

Nitra, Slovakia

Slovakia

129 83-003 2014-0978 The Current Situation of Testing Standards for Small Wind Turbine

Yao MingCollege of Engineering and Power Engineering

Inner Mongolia University of Technology

130 83-004 2014-0992 Rapid Modeling Method of Small Wind Turbine Blade

Li HengCollege of Engineering and Power Engineering

Inner Mongolia University of Technology

131 83-005 2014-1125An Optimization Solution of Tractor-

plough System Taking Additional Weight Based on NSGA- Ⅱ

Liu MengnanCollege of Vehicle and

Traffic Engineering, Henan University

of Science and Technology

132 83-006 2014-1337The Influence of Panax Notoginseng Seed Particles on Measurement of

Suspension Velocity

Gao XiaojunFaculty of Modern

Agricultural Engineering，

Kunming University of Science and

Technology

Topic (4) Mutual Recognition of Internationalization of Agricultural Machinery

133 84-001 2014-0597The Ride Comfort Analysis of Corn

Harvester-based on the Total Value of Ride and Vibration Dose

Zhou LinChina Agricultural

Mechanization Institute of Science

134 84-002 2014-1118Study on Evaluation of Rough

Processing Mechanization Degree of Main Agricultural Products in China

Liu QingInstitute of Agro-

Products Processing Engineering,

Chinese Academy of Agricultural

Engineering

135 84-003 2014-1121Construction of Agricultural Product Primary Processing Mechanization

Level Evaluation Index System

Wei QingCollage of Engineering,

136 84-004 2014-1563 Study on the Technical Regulation of Alfalfa Hay Mechanized Harvesting

Wu BeiChina Agricultural

UniversityChina

SESSION IX

ASIA FORUM

Monday, Sept. 15 08:00-20:00

Registration Location:the open place on the 1st floor near the Delegates

Access Gate C2, CNCC

Tuesday, Sept. 16

10:00-10:10 Tea Break

13:30-15:00 Session Opening Ceremony & Keynote Speeches Location: 302A,CNCC

15:00-15:15 Tea Break

15:15-16:45 Session Opening Ceremony & Keynote Speeches Location: 302A,CNCC

Wednesday, Sept. 17

Small-scale Agricultural Mechanization Location: 302A,CNCC

10:00-10:15 Tea Break

Small-scale Agricultural Mechanization Location: 302A,CNCC

13:30-15:00 AAAE 25th Executive Council MeetingLocation: 302A,CNCC

15:00-15:15 Tea Break

15:15-16:50 AAAE 25th Anniversary Celebration (Asia Summit)Location: 302A,CNCC

16:50-17:00 Session Closing Ceremony Location: 302A,CNCC

Thursday, Sept. 1816:00-17:00 Closing Ceremony

Location:309A+B, CNCC

Overview of Session IX: Asia Forum

OPENING CEREMONY OF SESSION IX

ASIA FORUM

ORAL PRESENTATIONS

SEPTEMBER 16, 2014

TUESDAY AFTERNOON

13:30-16:45

Location: Room 302A, the 3rd Foor of CNCCChair: Prof. Lanfang Zhang,

13:30-13:40 Opening speech by Prof. Lanfang Zhang13:40-13:50 Remarks by Mr. Yoshisuke Kishida, Vice President of AAAE, President of Shin- Norinsha Co., Ltd., Japan13:50-14:00 Address by Dr. Zhongli Pan, Vice President of AAAE, Department of Biological and Agricultural Engineering, University of California, Davis

Location: Room 302A, the 3rd Floor of CNCCChair: Prof. Vilas M. Salokhe,

Technical Presentations

Keynote Speeches

14:00-14:30 0618-076

Agricultural mechanization in India: lessons for developing countries

Prof. Gajendra SinghFormer President of ISAE, Professor of Indian Agricultural research Institute (IARI), India

14:30-15:00 0526-034

Biomimetic techniques in agricultural machinery

Prof. Jin TongVice President of CSAE, China, Director of the Key Laboratory for Terrain-Machine Bionics Engineering, Ministry of Education, China; Professor of School of Biological and Agricultural Engineering, Jilin University, China

Secretary General of AAAE, Deputy Director of Department of International Cooperation, Chinese Academy of Agricultural Mechanization Sciences, China

President of AAAE (2014-2015), Vice Chancellor of Kaziranga University, India

15:00-15:15 Tea Break

Location: Room 302A, the 3rd Floor of CNCCChair: Prof. Haile Ma,

Location: Room 302A, the 3rd Floor of CNCCChair: Mr. Yoshisuke Kishida,

15:15-15:45 0618-103

Remote sensing of plant phenotyping and vegetation functioning-from cell to canopy and from 2D to 3DProf. Kenji OmasaProfessor of Graduate School of Agricultural and Life Sciences, the University of Tokyo, Japan

15:45-16:15 2014-0141

Proximal sensing of hidden plant parts using radarProf. Peter Schulze LammersFormer President of EurAgEng, Rheinische Friedrich-Wilhelms-Universität Bonn, Germany

16:15-16:45 0826-901

Aerodynamic and energy engineering in agricultureProf. In-Bok LeeProfessor of Laboratory of Aero-Environmental & Energy Engineering (A3EL), Department of Rural Systems Engineering, College of Agricultural & Life Sciences, Seoul National University, Korea

SEPTEMBER 17, 2014

WEDNESDAY MORNING

08:30-11:30

Small-scale Agricultural Mechanization

Keynote Speeches

08:30-09:00 0826-902

Agriculture mechanization in KoreaProf. Sang Hun KimPresident of the Korean Society for Agricultural Machinery and Professor of Department of Biosystems Engineering, Kangwon National University, Korea

09:00-09:30 0826-903

Agricultural mechanization in the Asia: status and issuesDr. Peeyush SoniVice President of AAAE and Associate Professor at Asian Institute of Technology, Thailand

Vice President of AAAE, Professor and President of School of Food and Biological Engineering, Jiangsu University, China

Vice President of AAAE, President of Shin-Norinsha Co., Ltd., Japan

10:00-10:15 Tea Break

Location: Room 302A, the 3rd Floor of CNCCModerator: Dr. Peeyush Soni,

Location: Room 302A, the 3rd Floor of CNCCModerator: Mr. Yoshisuke Kishida,

Small-scale Agricultural Mechanization

Oral Presentations

09:30-09:45 2014-1131

A sensor-based light trap system for an early warning system in pest surveillanceDr. Chan Chee WanMalaysian Agricultural Research and Development Institute, Malaysia

09:45-10:00 2014-0247

Design and test of the garlic seed sequencing vibration machineDr. Zhaolei ZhangMechanical and Electronic Engineering College, Shandong Agricultural University, China

10:15-10:30 2014-0815

Research on gas-liquid two-phase flow characteristics during self-priming process of the pump Dr. Hong LiResearch Center of Fluid Machinery Engineering and Technology, Jiangsu University, China

10:30-10:45 2014-0198

Cloud service platform of agricultural machinery socialization and its business realizationDr. Jiayi HuangGuangzhou Jiankun Network Technology Develoment Co. Ltd., Guangzhou, China

10:45-11:00 0523-003

Production of reactive oxygen species by collapsing nanobubbles as a reason of seed germination promotionProf. Shu LiuGraduate School of Agricultural & Life Sciences, the University of Tokyo, Japan

Vice President of AAAE and Associate Professor at Asian Institute of Technology, Thailand

Vice President of AAAE, President of Shin-Norinsha Co., Ltd., Japan

11:00-11:15 2014-0202

Evaluation of digestibility of cooked rice grain using in vitro digestion

technique

Prof. Ogawa Yukiharu

Graduate School of Horticulture, Chiba University, Japan

11:15-11:30 2014-1007

Signal detection of colorimetric sensor array based on hyperspectral imaging techniqueProf. Zou XiaoboSchool of Food and Biological Engineering, Jiangsu University, Zhenjiang, China

AAAE 25TH EXECUTIVE COUNCIL MEETING

SEPTEMBER 17, 2014

WEDNESDAY AFTERNOON

13:30-15:00

AAAE 25TH ANNIVERSARY CELEBRATION (ASIA SUMMIT)

SEPTEMBER 17, 2014

WEDNESDAY AFTERNOON

15:15-16:50

Location: Room 302A, the 3rd Floor of CNCCChair: Prof. Lanfang Zhang, Secretary General of AAAE

Location: Room 302A, the 3rd Floor of CNCCChair: Prof. Gajendra Singh,

15:00-15:15 Tea Break

15:15-15:30 Remarks by Prof. Gajendra Singh, Founding President of AAAE

15:30-15:40 Address by the representative of CIGR

15:40-15:50 Address by the representative from ASABE

15:50-16:05 Address by the representative from Republic of Korea

16:05-16:15 Remarks by Prof. Vilas M. Salokhe, President of AAAE

16:15-16:50 Free discussion on the future development of AAAE

Founding President of AAAE, Professor of Indian Agricultural research Institute (IARI), India

CLOSING CEREMONY OF

SESSION IX ASIA FORUM

SEPTEMBER 17, 2014

WEDNESDAY AFTERNOON

16:50-17:00

Location: Room 302A, the 3rd Floor of CNCCChair: Prof. Gajendra Singh

16:50-17:00 Closing address by Prof. Vilas M. Salokhe, President of AAAE (2014-2015), Vice Chancellor of Kaziranga University, India.

SESSION IX

POSTER SESSIONS

08:30 - 12:00

Topic (1) Postharvest and Biotechnology

Topic (2) Farm Machinery and Power

Topic (3) Information Communication Technology in Agriculture

Topic (4) Energy, Environment and Emerging Technologies

128 91-001 0618-093

The Ratio of Transpiration to Evapotranspiration for

Maize under Dryland Farming Conditions in Loess Plateau of

Zhou ShanshanCollege of natural

resources and environment, Northwest A&F University,

Yangling, Shaanxi China

129 91-002 2014-0837

Simulation Analysis and Experiment Research for Gear-

linkage-cam Combination Planting Mechanism

Hu JianpingKey Laboratory of Modern

Agricultural Equipment and Technology，Ministry

of Education ，Jiangsu University

130 92-001 2014-0861

Effect of Gamma Irradiation on Microbiological and Two Main Phospholipids of Four Different

Chen SiSchool of Food Science and

Biotechnology, Zhejiang Gongshang University

131 92-002 2014-0937

Research and Application on Modular Design of Potato Cleaning, Classification and

Storage Machinery Equipment

Gao Bo,MENOBLE co., LTD

Beijing, 100083, ChinaChina

132 93-001 2014-1007Signal Detection of Colorimetric

Sensor Array Based on Hyperspectral Imaging Technique

LI Zhi-HuaSchool of Food and

Biological Engineering, Jiangsu university

133 94-001 2014-1467Experiments and Research of Related Parameters in Wheat-

Straw Painting

Liu PingyiCollege of Engineering,

TECHNICAL TOURS

TECHNICAL TOURS OF

Tour site 1: Chateau Changyu AFIP Global Beijing

Tour site 2: China Mengniu Dairy (Beijing) Co. Ltd.

All tours start from C1 Access of Convention area, CNCC, please note that the starting time is different. Each tour includes: technical tour and lunch.

Itinerary 08:00 Set off from C1 Access of Convention area, CNCC10:00 Arrive at Chateau Changyu AFIP Global Beijing10:00-12:00 Visiting12:00-13:00 Lunch, KFC one-person package13:00-15:00 Back to CNCCThe tour will include the followings:(1) Changyu Wine Culture Museum(2) European style underground wine cellar(3) World-class wine production facilities(4) Tasting Center (5) Vineyard at Changyu(6) European style village

Route: CNCC→Jingcheng Expressway 17th Exit (at Mujiayu Toll Station, in East Miyun County) and turning left for 300 m, about 2 hours’ driveTour duration: 7 hours including visiting and driving to the site

Itinerary 08:30 Set off from C1 Access of Convention area, CNCC10:00 Arrive at China Mengniu Dairy (Beijing) Co. Ltd.10:00-11:30 Visiting

11:30-12:30 Mengniu Staff Canteen, working lunch12:30-14:00 Back to CNCCThe tour will include the followings:(1) Mengniu Dairy Production and Sale Network in China(2) Modernized yoghurt and milk production lines(3) Normal temperature storehouse(4) Enterprise culture, history and management mode(5) Mengniu products exhibition and modernized working district

Route: CNCC→Jingtong Expressway→Baliqiao Toll Station→Jingjin Road→Wuxing Road and turning left at Gantang→Gantang Bridge →Lucheng Middle Road, about 1.5 hours’ driveTour duration: 5.5 hours including visiting and driving to the site

Tour site 3: Xiaotangshan Fruits and Vegetables Exhibition Center

Tour site 4: Beijing DQY Agriculture Technology Co., Ltd.

Itinerary 09:00 Set off from C1 Access of Convention area, CNCC10:00 Arrive at Xiaotangshan Fruits and Vegetables Exhibition Center 10:00-11:30 Visiting11:30-12:30 Canteen of Training Center at the Exhibition Center, buffet dinner12:30-13:30 Back to CNCCThe tour will include the followings:(1) Modernized greenhouse planting of cucumbers, cherries and tomatoes(2) Modernized greenhouse planting and picking of bananas and papayas(3) Seedling(4) Flowers planting(5) Vegetable planting, small-package vegetable grading, handling and packaging technologies

Route: CNCC→Jingzang Expressway (Badaling Expressway)→6th North Ring Road (to Shunyi for 12 km eastward)→Off expressway at Xiaotangshan Toll Station at Beiyuan→Turning right at 1st traffic light→Turning left for 1.5 km at 2nd traffic light, about 1 hour’s driveTour duration: 4.5 hours including visiting and driving to the site

Itinerary 08:00 Set off from C1 Access of Convention area, CNCC10:00 Arrive at Beijing DQY Agriculture Technology Co., Ltd.10:00-11:30 Visiting11:30-13:00 Origus, buffet dinner (by the same bus)13:00-15:00 Back to CNCC

The tour will include the followings:(1) Ecological farm exhibition hall(2) Shell egg processing(3) Liquid egg processing(4) Large-scale methane project(5) Bio-natural gas project

Route: CNCC→Jingzang Expressway (Badaling Expressway)→Kangzhuang Exit→Driving northwards alongside the road (in direction of Zhangshanying town government) for about 15 km, about 2 hours’ driveTour duration: 7 hours including visiting and driving to the site

NAME LIST OF THE PARTICIPANTS

Name List of the ParticipantsNo. Name Affiliation Email

1 A.M. Mustafa Zhejiang University, Hangzhou, Zhejiang, China ahmedmostafa050@yahoo.com

2 Abdul Qaisrani Department of Agriculture, Australia Rashid.Qaisrani@daff.gov.au

3 Abhijit Borah Department of Agricultural Engineering, Assam Agricultural University, Assam, India abhijit64@gmail.com

4 Abhisesh Silwal Washington State University, USA abhisesh.silwal@wsu.edu

5 Ahmad Fiaz College of Engineering, Nanjing Agricultural University, China engrfiaz@yahoo.com

6 Aijie Yuan Chinese Society for Agricultural Machinery, China csam@caams.org.cn

7 Aijun Zhang Hebei Agricultural University, Baoding, Hebei, China xm70526@163.com

8 Akindele Folarin Alonge University of Uyo, Nigeria akindelealonge@uniuyo.edu.

9 Akinnawo Ebenezer Indepth Harvest Awareness (IDHA), Gambia knnw4@yahoo.co.uk

10 Alaa El-Din A. Bekhit AlSaid University of Otago, New Zealand aladin.bekhit@otago.ac.nz

11 Alagha Samuel Adelanke Rufus Giwa Polytechnic, Owo, Nigeria alamulamuko@gmail.com

12 Alexander Jan Schmithausen Institute of Agricultural Engineering, Germany schmithausen@uni-bonn.de

13 Allen Jack McHugh University of Southern Queensland, Australia mchugha@usq.edu.cn

14 Amadou Keita International Institute for Water and Environmental Engineering, USA amadou.keita@2ie-edu.org

15 Anders Leegaard Riis

Pig Research Centre, Danish Agriculture & Food Council, Copenhagen, Denmark anr@lf.dk

16 Andi Dirpan Rusdin Ehime University, Indonesia dirpan_83@yahoo.com

17 Andrew Barry Ecole Polytechnique Fédérale de Lausanne (EPFL), Chile andrew.barry@epfl.ch

18 Anja Graeff TU Muenchen Weihenstephan, Germany anja.graeff@wzw.tum.de

19 Anjun Mei Chinese Academy of Agricultural Mechanization Sciences, Beijing, China meianjun@126.com

20 Anning Li Center for Agricultural Mechanization Technology Development and Extension, Beijing, China lianning1963@126.com

21 Ao ZhangDepartment of Research and Projects, Hi-Target Survey Instruments Company Ltd., Guangzhou, Guangdong, China

zhangaofire@gmail.com

22 Aolin Yao Jilin University, Changchun, Jilin, China 469414108@qq.com

23 Arturo Chong Eslava Universidad Autónoma Chapingo, Mexico achong57@gmail.com

24 Axel Munack Thuenen Institute of Agricultural, Germany axel.munack@ti.bund.de

25 Babatope Albert Alabadan Federal University, Oye-Ekiti, Nigeria babatope.alabadan@fuoye.

edu.ng

26 Baijing Qiu Jiangsu University, Zhenjiang, Jiangsu, China qbj@ujs.edu.cn

27 Bangbang Zhang College of Resource and Environmental Sciences, China Agricultural University, Beijing, China 843319841@qq.com

28 Baofeng Su Northwest A&F University, Yangling, Shaanxi, China bfs@nwsuaf.edu.cn

29 Baofeng Zhang Shenyang Agricultural University, Shenyang, Liaoning, China trunks_bao@163.com

30 Baohua Kong Northeast Agricultural University, Harbin, Heilongjiang, China kongbh63@hotmail.com

31 Baoming Li College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China weichaozheng@cau.edu.cn

32 Baoxia Sun College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China sunbaoxia@126.com

33 Barbari Matteo University of Florence-Dept., GESAAF, Italy matteo.barbari@unifi.it

34 Bashar Mehrez South China Agricultural University, Guangzhou, China basharmehrez@yahoo.com

35 Bdalla Noureldin Osman A China Agricultural University, Beijing, China ginan99@yahoo.com

36 Bei Wang School of Food & Biological Engineering, Jiangsu University, Zhenjiang, Jiangsu, China wangbei724@163.com

37 Bencheng Sheng Kubota China Holdings Co., Ltd., Shanghai, China bencheng.sheng@kubota.com

38 Bengang Wu School of Food & Biological Engineering, Jiangsu University, Zhenjiang, Jiangsu, China jimmy20081@163.com

39 Benhua Zhang College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China benhuazhang@163.com

40 Bernhardt Heinz Agricultural System Engineering Technische Universität München, Munic, Germany

heinz.bernhardt@wzw.tum.de

41 Bill Stout Past President of CIGR, USA stouttamu@yahoo.com

42 Bin LiInner Mongolia Academy of Agricultural and Animal Husbandry Sciences, Hohhot, Inner Mongolia, China

libin_kim@sina.com

43 Bin Wang College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China wangbin1759@126.com

44 Bing XiaWater Conservancy and Energy Dynamics Engineering College, Yangzhou University, Yangzhou, Jiangsu, China

1071303788@qq.com

45 Bing Zhao UNESCAP/CSAM 　

46 Bingnan Yang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China yangbn@caams.org.cn

47 Bo Jiang Research center of fluid machinery engineering and Technology, Jiangsu University, Zhenjiang, Jiangsu, China jiang20080224@126.com

48 Bo Jin Zhejiang University bjin@zju.edu.cn

49 Bo LingCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China

6lb6lb@163.com

50 Bo Wu Jilin University/Changchun Institute of Technology, Changchun, Jilin, China loverwb@qq.com

51 Bo Xu College of Engineering, China Agricultural University, Beijing, China xubocau@163.com

52 Bo ZhangCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China

zhangbo_609@163.com

53 Bo Zhou College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China zhoubo891018@163.com

54 Bolin Shi Sub-Institute of Food and Agriculture, China National Institute of Standardization, Beijing, China spring0214@163.com

55 Boren Fan Jiangsu Bureau of Agricultural Mechanization Management, China jsfbr@163.com

56 Bowen Zhao Inner Mongolia Hua De New Technology Limited Company, Hohhot, Inner Mongolia 403286504@qq.com

57 Bronson Kevin USDA-ARS, USA kevin.bronson@ars.usda.gov

58 Caglayan Nuri Dept. of Agricultural Machinery, Turkey nuricaglayan@akdeniz.edu.tr

59 Caicong Wu College of Information and Electrical Engineering, Beijing University, Beijing, China wucaicong@gmail.com

60 Cailing Liu China Agricultural University, Beijing, China cailingliu@163.com

61 Can ErtekinDepartment of Farm Machinery, Faculty of Agricultural Engineering, Akdeniz University, Antalya, Turkey

ertekin@akdeniz.edu.tr

62 Cascone Giovanni University of Catania, Italy gcascone@unict.it

63 Casey Kenneth Texas A&M Agri. Life Research, USA kdcasey@ag.tamu.edu

64 Ceren Tülek Ege University, Turkey cerentulek@gmail.com

65 Changfeng Jiao College of Economics and Management, China Agricultural University, Beijing, China cfjiao_196611@163.com

66 Changfu TongInstitute of Water Resources Sciences in Pastoral Areas, Ministry of Water Resources of PRC, Hohhot, Inner Mongolia, China

tcf110110@163.com

67 Changhua Liu Hubei Bureau of Agricultural Mechanization Management, China hbsnjxh@126.com

68 ChangHua Lu Jiangsu Academy of Agricultural Sciences, Nanjing, Jiangsu, China changhualu@163.com

69 Changhua Ma Jiangsu University, Zhenjiang, Jiangsu, China mch982004@126.com

70 Changran He Beijing Information Science and Technology University, Beijing, China 934455433@qq.com

71 Changyong Shao College of Engineering, China Agricultural University, Beijing, China shaochangyong@cau.edu.cn

72 Changyuan ZhaiCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China

zhaichangyuan@163.com

73 Chanjun Sun Zhejiang University, Hangzhou, Zhejiang, China 1153481638@qq.com

74 Chanli Hu College of Electrical and Information, Jiangsu University, Zhenjiang, Jiangsu, China 1025979685@qq.com

75 Chan-Seok Ryu Gyeongsang National University, Republic of Korea ryucs@gnu.ac.kr

76 Chao Ma China Agricultural University, Beijing, China machao-1990@163.com

77 Chao Zheng College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China weichao4275@163.com

78 Chaohui Feng University College Dublin, Ireland fengchaohui1002@sina.com

79 Chaohui Hao Modern Agricultural Equipment Co., Ltd., Beijing, China kkk-875@163.com

80 Chaojie Cai Chinese Academy of Agricultural Mechanization Sciences, Beijing, China 530036131@qq.com

81 Chaoyong Cai Zhejiang Bureau of Agricultural Mechanization Management, China cy-cai2000@163.com

82 Chee Wan Chan Malaysian Agricultural Research and Development Institute, Malaysia cwchan@mardi.gov.my

83 Chen Chen Zhejiang Sci-Tech University, Hangzhou, Zhejiang, China 284413807@qq.com

84 Chen Zhai College of Engineering, China Agricultural University, Beijing, China 270905844@qq.com

85 Chen SunInst i tu te of Environment and Susta inable Development in Agriculture, China Academy of Agricultural Sciences, Beijing, China

sunchen@caas.cn

86 Chen Tang Zhejiang University, Hangzhou, Zhejiang, China tangtone@zju.edu.cn

87 Chen Zhang Sino-European Institute of Aviation Engineering, Tianjin, China marczhangchen@sina.cn

88 Chen-ang LvSchool of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China

lvchenang@163.com

89 Chenchen Cao Dalian Ocean University, Dalian, Liaoning, China hanyuefuqu@163.com

90 Cheng ShenNanjing Research Institute for Agriculture Mechanization， Ministry of Agriculture, Nanjing, Jiangsu, China

shencheng1989@cau.edu.cn

91 Chengchun Zhang Terrain-Machine Bionics Engineering Lab, Jilin University, Changchun, Jilin, China jluzcc@jlu.edu.cn

92 Chenggao Xu Guizhou Committee of Agriculture, Guizhou, China 306060774@qq.com

93 Chengtao Wang Beijing Technology and Business University, Beijing, China wct5566@163.com

94 Chengxu Lv China Agricultural University, Beijing, China lvchengxu1026@163.com

95 Chenhu Xu Jiangsu University, Zhenjiang, Jiangsu, China xuchenghustc@126.com

96 Chenxi Zhao Northeast Agricultural University, Harbin, Heilongjiang, China ecjiang@sina.com

97 Chenxian Yang College of Oil and Food, Henan University of Technology, Zhengzhou, Henan, China ycxyou@163.com

98 Chi Zhang China Agricultural University, Beijing, China 1049612536@qq.com

99 Chu GaoWater Conservancy and Civil Engineering College, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China

gaochu19880617@163.com

100 Chu ZhangCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China

chuzh@zju.edu.cn

101 Chuanmin Yang College of Mechanical Engineering, Tianjing University of Commerce, Tianjin, China ychmin@tjcu.edu.edu

102 Chuanyang ZhangCollege of Mechanical and Electronic Engineering, Shandong Agricul tural Universi ty, Tai 'an, Shandong, China

chuanyangzhang@163.com

103 Chuanyuan Zhao College of Mechanical Engineering, Northwest A&F University, Yangling, Shaanxi, China cynthiazcy@gmail.com

104 Chukai Chen Office of Agricultural Mechanization, Department of Agriculture of Guangdong, China Zhanghy10@126.com

105 Chun Wang Heilongjiang Bayi Agricultural University, Daqing, Heilongjiang, China wangchun1963@126.com

106 Chunguang Wang Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China jdwcg@imau.edu.cn

107 Chunjiang ZhaoNational Engineering Research Center for Information Technology in Agriculture, Beijing, China

zhaocj@nercita.org.cn

108 Chunlin Xu Harbin Academy of Agricultural Sciences, Harbin, Heilongjiang, China xcl1980@vip.sohu.com

109 Chunsong GuanNanjing Research Institute for Agriculture Mechanization， Ministry of Agriculture, Nanjing, Jiangsu, China

cs.guan@163.com

110 Chunxia Jiang Nanjing Agricultural University, Nanjing, Jiangsu, China 2373697752@qq.com

111 Chunxia Liu College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China 958987143@qq.com

112 Claudio García National Research Institute of Agriculture, Uruguay cgarcia@inia.org.uy

113 Claus Grøn Sørensen Aarhus University, Denmark clausaagegronsoerensen@

gmail.com

114 Cong Chen Nanjing Research Institute for Agricultural Ministry of Agriculture, Nanjing, Jiangsu, China chenchong520206@163.com

115 Cuihong Liu College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China cuihongliu77@163.com

116 Cuiling Li College of Engineering, China Agricultural University, Beijing, China 123lcl586@sina.com

117 Cungui He Shaanxi Bureau of Agricultural Mechanization Management, China sxsnyjxxh@163.com

118 Cunkun Chen National Center for Agro-products Preservation Engineering and Technology, Tianjin, China cck0318@126.com

119 D. S. Balachandra Indian Society of Agricultural Engineers, India balachandra.babu@gmail.com

120 Dachun Qin Office of Agricultural Machinery, Chongqing Committee of Agriculture, Chongqing, China

121 Dae-hyun Jung Seoul National University, Republic of Korea jeoguss@gmail.com

122 Daniel Berckmans KU Leuven, Belgium Daniel.Berckmans@biw.kuleuven.be

123 Daniella Jorgede Moura State University of Campinas, Brazil daniella.moura@feagri.

124 Danyang Wang College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China danyang7864@sina.com

125 Daobing Chen College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China 247519272@qq.com

126 Daoliang Li College of Information and Electrical Engineering, China Agricultural University, Beijing, China dliangl@139.com

127 Daolin ZhangCollege of Agricultural Engineering and Food Sciences, Shandong University of Technology, Zibo, Shandong, China

zdlzb@163.com

128 Dariush Zare Shiraz University, Iran sanyzare@yahoo.com

129 Dariush Zare Shiraz University, Iran sanyzare@yahoo.com

130 Darrin John Drollinger

American Society of Agricultural and Biological Engineers, USA drollinger@asabe.org

131 David Wilson Purdue University, USA wilsondd@purdue.edu

132 Dawei Gao College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China gaodaweidw@126.com

133 Da-Wen Sun Agriculture & Food Science Centre, University College Dublin, Ireland dawen.sun@ucd.ie

134 De Gao Ningbo Inst i tute of Technology, Zhej iang University, Ningbo, Zhejiang, China Gaode63@163.com

135 De Tian North China Electric Power University, Beijing, China tdncepu@163.com

136 Dean Zhao Jiangsu University, Zhenjiang, Jiangsu, China dazhao@ujs.edu.cn

137 Dechang Yang College of Information and Electrical Engineering, China Agricultural University, Beijing, China yangdechang@cau.edu.cn

138 Dehua Wu Anhui Huaifeng Modern Agricultural Equipment Ltd. Co. hfnyjx988@126.com

139 Dejian Zhang Gansu Academy of Agricultural Mechanization Sciences, Lanzhou, Gansu, China zdjian@163.com

140 Dejun Chen Jinhua Vocation and Technology Institute, Jinhua, Zhejiang, China cdj0579@163.com

141 Deke Xing

Key Laboratory of Modern Agricultural Equipment and Technology, Ministry of Education & Jiangsu Province, Institute of Agricultural Engineering, Jiangsu University, Zhenjiang, Jiangsu, China

xingdeke@hotmail.com

142 Dengwei Wang Bei j ing Research Cente r fo r In format ion Technology in Agriculture, Beijing, China wangdws@126.com

143 Dennis Johannes W. Snoek Wageningen University, the Netherlands dennis.snoek@wur.nl

144 Dexia Chi Shenyang Agricultural University, Shenyang, Liaoning, China cdx-215@163.com

145 Dezhao Liu Aarhus University, Denmark deli@eng.au.dk

146 Dianlong Wang College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China 759257788@qq.com

147 Dong HuCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China

15158131053@163.com

148 Dong Wang College of Engineering, China Agricultural University, Beijing, China wdsky287245@126.com

149 Dongdong DuCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China

dddshangyu@126.com

150 Donghong Liu Zhejiang University, Hangzhou, Zhejiang, China dhliu@zju.edu.cn

151 Dongwei Wang Qingdao Agricultural University, Qingdao, Shandong, China w88030661@163.com

152 Dongxing Zhang College of Engineering, China Agricultural University, Beijing, China zhangdx@cau.edu.cn

153 Douglas J. Reinemann University of Wisconsin-Madison, USA djreinem@wisc.edu

154 Du Chen China Agricultural University, Beijing, China tchendu@cau.edu.cn

155 Earl Vories USDA-ARS, USA Earl.Vories@ars.usda.gov

156 Elfriede Ofner-Schroeck LFZ Raumberg-Gumpenstein, Austria elfriede.ofner-schroeck@lfz.

157 Enchen jiang College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China ecjiang@sina.com.cn

158 Endita Prima Ari Pratiwi

Laboratory of Irrigation and Water Management, Department of Agro-Environmental Sciences, Faculty of Agriculture, Kyushu University, Japan

enditaprima@gmail.com

159 Enkhbayar Gonchigdorj MSUA, Mongolia miraj34@yahoo.com

160 Enrique Palacios Colegio de Postgraduados, Mexico epalacio@colpos.mx

161 Enrong Mao College of Engineering, China Agricultural University, Beijing, China gxy15@cau.edu.cn

162 Eric B. Smith USA smithericb@johndeere.com

163 Erkan Dikmen Dikmen

Dept. of Energy Systems Engineering, Fac. of Technology, Süleyman Demirel Univ., Turkey erkandikmen@sdu.edu.tr

164 Evelia Schettini University of Bari, Italy evelia.schettini@uniba.it

165 Fabian Sellmann University of Applied Science Osnabrueck, Germany

f.sellmann@hs-osnabrueck.de

166 Fang Lu College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China 915430799@qq.com

167 Fang Tian College of Engineering, China Agricultural University, Beijing, China tianfangxn@163.com

168 Fang Xie China Agricultural University, Beijing, China cauxiefang@163.com

169 Fang ZhangInstitute of Water Resources and Hydro-electric Engineering, Xi'an University of Technology, Xi'an, Shaanxi, China

zf200612915@126.com

170 Fangkai MaDepartment of Planning, Changjiang Institute of Survey, Planning, Design and Research, Wuhan, Hubei, China

mafangk@qq.com

171 Fangxia Pei Lanzhou University of Technology, Lanzhou, Gansu, China 1360771490@qq.com

172 Fangyuan AoChongqing Center for Agricultural Mechanization Technology Development and Extens ion , Chongqing, China

605276204@qq.com

173 Fanyu QiCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China

32930051@qq.com

174 Fayose Folasayo Tshwane University of Technology, South Africa FayoseFT@tut.ac.za

175 Fedro S. Zazueta Office of Academic Technology, University of Florida, USA fsz@ufl.edu

176 Fei Liu College of Mechanical Engineering, Inner Mongolia University, Hohhot, Inner Mongolia, China afei2208@163.com

177 Fei LiuCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China

fliu@zju.edu.cn

178 Feifei Tao College of Engineering, China Agricultural University, Beijing, China feiftao@gmail.com

179 Feiyu Ma College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China mafeiyu624@163.com

180 Fen He Chinese Academy of Agricultural Engineering, Beijing, China hefen_2005@163.com

181 Fen LiaoInstitute of Agro-products Processing, Guangxi Academy of Agricultural Sciences, Nanning, Guangxi, China

liaofen@gxaas.net

182 Feng Kang Beijing Forestry University, Beijing, China kangfeng98@bjfu.edu.cn

183 Feng Li College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China pingfeng_li@163.com

184 Feng Lv College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China lvfeng1980@126.com

185 Fengkun Sun College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China 501319589@qq.com

186 Fengle ZhuCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China

denith@126.com

187 Fengxian Gao College of Animal Science and Technology, Hunan Agricultural University, Changsha, Hunan, China 362849150@qq.com

188 Firat Komekci Department of Agricultural Machinery, Agricultural Faculty, Ege University, Turkey firat.komekci@ege.edu.tr

189 Francis Kumi University of Cape Coast, Ghana fekkumi@gmail.com

190 Frauke P. C. Müller Institute of Agricultural Engineering, Germany f.mueller@uni-bonn.de

191 Frederik Langsenkamp

University of Applied Science Osnabrueck, Germany

frederik.langsenkamp@hs-osnabrueck.de

192 Fugui Zhang College of Mechanical Engineering, Guizhou University, Guiyang, Guizhou, China zhfugui@vip.163.com

193 Fuping Hao Chinese Academy of Agricultural Mechanization Sciences, Beijing, China fupinghao@foxmail.com

194 Fuqiang Li College of Engineering, China Agricultural University, Beijing, China lifq1987@163.com

195 Fuxing ZouCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China

fuxing_zou@aliyun.com

196 Fuyang TianCollege of Mechanical and Electronic Engineering, Shandong Agricul tural Universi ty, Tai 'an, Shandong, China

sdautfy@163.com

197 Fuzeng YangCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China

yfz0702@163.com

198 Gaixia ZhaiHohhot Branch, Chinese Academy of Agricultural Mechanization Sciences, Hohhot, Inner Mongolia, China

zhaigaixia79@163.com

199 Gajendra Singh Indian Agricultural Research Institute(IARI), India prof.gsingh@gmail.com

200 Gang Liu College of Information and Electrical Engineering, China Agricultural University, Beijing, China 979486713@qq.com

201 Gang Wang College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China wanggang_59@126.com

202 Gang ZhaoSchool of Mechatronics and Engineering, Harbin Engineering University, Harbin, Heilongjiang, China

zhaogedu@gmail.com

203 Gaofeng ZhouCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China

wfzhougf@126.com

204 Gaohong Yu College of Machinery and Automation, Zhejiang Sci-Tech University, Hangzhou, Zhejiang, China yugh@zstu.edu.cn

205 Ge Ye Chinese Academy of Agricultural Mechanization Sciences, Beijing, China yege@caams.org.cn

206 Gerard P.A. Bot Wageningen University, the Netherlands gerardenvera.bot@hetnet.nl

207 Gerasimos Martzopoulos Aristotle University of Thessaloniki, Greece nikita@agro.auth.gr

208 Gerd-Christian Maack University of Bonn, Germany c.maack@uni-bonn.de

209 Gerrit J. Carsjens Wageningen University, the Netherlands Gerrit-Jan.Carsjens@wur.nl

210 Gerrit van Straten Wageningen University, the Netherlands gerrit.vanstraten@wur.nl

211 Giuliano Vox Department of Agricultural and Environmental Science DISAAT, University of Bari, Italy evelia.schettini@uniba.it

212 Guangnan Chen University of Southern Queensland, Australia chengn@usq.edu.au

213 Guangqun Huang College of Engineering, China Agricultural University, Beijing, China huanggq@cau.edu.cn

214 Guangsheng Yang College of Oil and Food, Henan University of Technology, Zhengzhou, Henan, China ygs12690@126.com

215 Guangwei WuDepartment of Precision Agriculture, National Engineering Research Center for Information Technologies in Agriculture, China

cauwgw@126.com

216 Guangyou Yang Hubei University of Technology, Wuhan, Hubei, China pekka@126.com

217 Guangzhong LuanCollege of Food Science and Engineering, Northwest A&F University, Yangling, Shaanxi, China

qlgz@nwsuaf.edu.cn

218 Guanhua Huang China Agricultural University, Beijing, China ghuang@cau.edu.cn

219 Guanting PanCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China

807233266@qq.com

220 Guanyu Shang Farmland Irrigation Research Institute, Chinese Academy of Agricultural Sciences, Beijing, China 396424486@qq.com

221 Guanze He Chinese Academy of Agricultural Mechanization Sciences, Beijing, China 2819861132@qq.com

222 Guifang Fan Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing, China fanguifang@tsinghua.edu.cn

223 Guiju Fan Shandong Agricul tural Universi ty, Tai 'an, Shandong, China fanguiju2002@163.com

224 Guilin LiuHohhot Branch, Chinese Academy of Agricultural Mechanization Sciences, Hohhot, Inner Mongolia, China

lgl527@sohu.com

225 Guimin Wang Foton Lovol International Heavy Industry Co., Ltd. YTO Group, China jiangyujiao@lovol.com.cn

226 Guisheng Geng Chinese Academy of Agricultural Mechanization Sciences, Beijing, China caams-genggs@163.com

227 Guo Zhai Bei j ing Research Cente r fo r In format ion Technology in Agriculture, Beijing, China 1050646270@qq.com

228 Guochao Bu Beijing Forestry University, Beijing, China gbumarix@gmail.com

229 Guolin Li Heilongjiang Institute of Agricultural Mechanical Engineering Science, Harbin, Heilongjiang, China gllg1008@163.com

230 Guoqiang Zhang Aarhus University, Denmark guoqiang.zhang@eng.au.dk

231 Guotian HuCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China

hugttrh@163.com

232 Guoxin Wang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China wangguox2008@sina.com

233 Guoyang Yuan College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China y927389066@163.com

234 H. Emre Akman Akdeniz University, Turkey hemreakman@akdeniz.edu.tr

235 Hai Wang College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China wanghaiting27@163.com

236 Haichao SongCollege of Mechanical and Electrical Engineering, Nanjing Forestry University, Nanjing, Jiangsu, China

songhc@njfu.edu.cn

237 Haifeng Lu China Agricultural University, Beijing, China hfcauedu@163.com

238 Haihua Wang China Agricultural University, Beijing, China wang_haihua@163.com

239 Haihua Wu Chinese Academy of Agricultural Mechanization Sciences, Beijing, China caamswhh@163.com

240 Hailiang ZhangCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China

hailiang.zhang@163.com

241 Haina Wang College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China daffodilkent@gmail.com

242 Haiwei RenDepartment of Food Science and Engineering, Lanzhou University of Technology, Lanzhou, Gansu, China

rhw52571119@163.com

243 Haiyan Zhou Chinese Academy of Agricultural Mechanization Sciences, Beijing, China zhouhaiyan@caams.org.cn

244 Haiyang Yu Bei j ing Research Cente r fo r In format ion Technology in Agriculture, Beijing, China yuhy@nercita.org.cn

245 Haiye Yu College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China haiye@jlu.edu.cn

246 Hakjin Kim Seoul National University, Republic of Korea kimhj69@snu.ac.kr

247 Hamelin Lorie University of Southern Denmark, Canada loha@kbm.sdu.dk

248 Han Bao Bei j ing Research Cente r fo r In format ion Technology in Agriculture, Beijing, China baoh@nercita.org.cn

249 Han Huang Terrain-Machine Bionics Engineering Lab, Jilin University, Changchun, Jilin, China huanghan452012@163.com

250 Han Pan China Agricultural University, Beijing, China 1037600473@qq.com

251 Han Shufeng John Deere, USA HanShufeng@JohnDeere.com

252 Hannah Licharz University of Bonn, Germany hlicharz@uni-bonn.de

253 Hanping Mao Institute of Agricultural Engineering, Jiangsu University, Zhenjiang, Jiangsu, China maohp@ujs.edu.cn

254 Hans von Wachenfelt

Swedish University of Agricultural Science, Germany hans.von.wachenfelt@slu.se

255 Hanyue Zhang Institute of Modern Agricultural Equipment of Guangdong, China

256 Hao Chun Liu College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China 457579596@qq.com

257 Hao Zhang College of Information and Electrical Engineering, China Agricultural University, Beijing, China zhangh1510@gmail.com

258 Haopeng Liu College of Engineering & Technology, Huazhong Agricultural University, Wuhan, Hubei, China 521133471@qq.com

259 Haoran Mei Terrain-Machine Bionics Engineering Lab, Jilin University, Changchun, Jilin, China 182164426@qq.com

260 Hasan Yilmaz Akdeniz University, Faculty of Agriculture, Turkey hasanyilmaz@akdeniz.edu.tr

261 Hassanien Reda College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China reda.emam@gmail.com

262 Hassouna Mélynda INRA, France melynda.hassouna@rennes.

263 Hatem Mohamed Faculty of Agriculture, Cairo University, Egypt mhatem15@hotmail.com

264 He WangKey Laboratory of Networked Control System, Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang, Liaoning, China

wanghe@sia.cn

265 Helena Jungbluth Kerstin University of Hohenheim, Germany kjungblu@uni-bonn.de

266 Heling Zhang College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China zhl834@sina.com

267 Henan Zhang Jiangsu University, Zhenjiang, Jiangsu, China henanhaoyun@126.com

268 Heng Li Inner Mongolia University of Technology, Hohhot, Inner Mongolia, China 610584505@qq.com

269 Heping Zhu USDA-ARSATRU, USA heping.zhu@ars.usda.gov

270 Hermann Auernhammer Munich University of Technology, Germany Hermann@Auernhammer.de

271 Hermann Garbers German Engineering Federation - Agricultural Machinery Division, Germany hermann.garbers@claas.com

272 Hiroshi Shimizu Kyoto University, Japan hshimizu@kais.kyoto-u.ac.jp

273 Hong Cao Ins t i t u t e o f Agr i cu l tu ra l Economics and Information, Nanjing, Jiangsu, China caohongxin@hotmail.com

274 Hong Cheng Jilin Bureau of Agriculture, China njjw@public.cc.jl.cn

275 Hong Liu Hainan Normal University lh@hainnu.edu.cn

276 Hong Zhang Zhejiang Gongshang University, Hangzhou, Zhejiang, China

hongzh1316@mail.zjgsu.edu.cn

277 Hongbin Cong Chinese Academy of Agricultural Engineering, Beijing, China conghongbin@163.com

278 Hongbin Pu South China University of Technology, Guangzhou, China fehbpu@scut.edu.cn

279 Hongfang Yuan College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China yhf1984828@163.com

280 Hongguo Cao Chinese Academy of Agricultural Mechanization Sciences, Beijing, China hgcao4259@sina.com

281 Hongju He University College Dublin, Ireland hongju.he0329@gmail.com

282 Honglei Jia College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China jiahl@vip.163.com

283 Hongli Wang Jilin University, Changchun, Jilin, China wanghongliz@126.com

284 Hongliang Cao College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China

hongliangcao@mail.hzau.edu.cn

285 Hongping ZhouCollege of Mechanical and Electrical Engineering, Nanjing Forestry University, Nanjing, Jiangsu, China

xmm08341@163.com

286 Hongwen Li College of Engineering, China Agricultural University, Beijing, China lhwen@cau.edu.cn

287 Hongxin Wu Chinese Academy of Agricultural Mechanization Sciences, Beijing, China caamscad@163.com

288 Hongyan Gao Jiangsu University, Zhenjiang, Jiangsu, China ghy06@126.com

289 Hongyin Jiang Anhui Bureau of Agricultural Mechanization Sciences, China ahjiang@sohu.com

290 Hongyu Liu Jiangsu University, Zhenjiang, Jiangsu, China hongyu1015@sina.cn

291 Hongyu Wang College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China w_hongyu123@126.com

292 Hongyu Yan Jilin Academy of Agricultural Mechanization Sciences, Changchun, Jilin, China jlnjxh@163.com

293 Hongzhou Lei College of Information and Electrical Engineering, China Agricultural University, Beijing, China hongzhou@cau.edu.cn

294 Hua Li College of Engineering, Nanjing Agricultural University, Nanjing, Jiangsu, China lihua@njau.edu.cn

295 Hua Wang Chinese Academy of Engineering, Beijing, China wangmh@cae.cn

296 Hua Zhang Anhui Science and Technology University, Fengyang, Anhui, China chinafeihong@163.com

297 Hualu SongCollege of Mechanical and Electronic Engineering, Shandong Agricul tural Universi ty, Tai 'an, Shandong, China

songhualu@126.com

298 Huangzhen Lv Chinese Academy of Agricultural Mechanization Sciences, Beijing, China lvhz@caams.org.cn

299 Hubiao Wang College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China hbwang01@sina.com

300 Hui Guo College of Mechanical and Traffic, Xinjiang Agricultural University, Urumqi, Xinjiang, China gh97026@126.com

301 Hui Wang Chinese Academy of Agricultural Mechanization Sciences zjn990210@163.com

302 Hui Zhang Zhejiang University, Hangzhou, Zhejiang, China nbzhd@hotmail.com

303 Hui Zhao Tianjing University of Science and Technology, Tianjin, China 1181603241@qq.com

304 Huichun Ye College of Resource and Environmental Sciences, China Agricultural University, Beijing, China yehuichun000@126.com

305 Huimin Fang Nanjing Agricultural University, Nanjing, Jiangsu, China hdldl@126.com

306 Huimin Feng College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China fenghuimin2013@126.com

307 Huixia Wang Terrain-Machine Bionics Engineering Lab, Jilin University, Changchun, Jilin, China genista1tc@163.com

308 Ibrahim Saleh MacDon Industries Ltd., Canada isaleh@macdon.com

309 Ibraimo Teleha Chabite

College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China itchabite@gmail.com

310 Ikko Ihara Kobe University, Japan ihara@port.kobe-u.ac.jp

311 In-Bok Lee Seoul National University, Republic of Korea iblee@snu.ac.kr

312 Isabel Maria Duarte Escola Superior Agrária de Coimbra, Portugal iduarte@esac.pt

313 Ivan Svec Institute of Chemical Technology in Prague, Czech Republic Ivan.Svec@vscht.cz

314 Jan Häbler Institute of Agricultural and Urban Ecological, Berlin Humboldt University, Germany

jan.haebler@agrar.hu-berlin.de

315 Jan MaxaInstitute for Agricultural Engineering and Animal Husbandry, Bavarian State Research Centre for Agriculture, Germany

Jan.Maxa@LfL.bayern.de

316 Jana Galambosova Slovak University of Agriculture in Nitra, Slovakia jana.galambosova@uniag.sk

317 Janusz Piechocki University of Warmia and Mazuryin Olsztyn, Poland jpt@uwm.edu.pl

318 Jaw-Kai Wang Jawkai Bioengineering R&D Center, Shenzhen, China jawkai@hawaii.edu

319 Jean-Christophe Rousseau Berthoud, France jc.rousseau@berthoud.com

320 Jerzy Weres Poznan University of Life Sciences, Poland weres@up.poznan.pl

321 Ji DuCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China

836947300@qq.com

322 Ji ZhangCollege of Mechanical and Electronic Engineering, Shandong Agricul tural Universi ty, Tai 'an, Shandong, China

langmanmanwu789@163.com

323 Jia Chen College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China 641783385@qq.com

324 Jia Huang Guangzhou Jiankun Network and Technology Development Co. Ltd. huangjy@e-jiankun.com

325 Jia Zhang Bei j ing Research Cente r fo r In format ion Technology in Agriculture, Beijing, China zhjch03123@163.com

326 Jia Zhao Ningbo Inst i tute of Technology, Zhej iang University, Ningbo, Zhejiang, China jiabei688@126.com

327 Jiabo Zhan Shandong Bureau of Agricultural Mechanization Management, China sdnjll@sina.com

328 Jiachen RenCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China

330497161@qq.com

329 Jiale Zhao College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China zhaojiale0313@163.com

330 Jiaming Li China Agricultural University, Beijing, China lov3ghost@126.com

331 Jian Chen College of Engineering Technology, Southwest University, Chongqing, China jianchen@swu.edu.cn

332 Jian Chen Foton Lovol International Heavy Industry Co., Ltd., Weifang, Shandong, China none2005@163.com

333 Jian Jin Jiangsu University, Zhenjiang, Jiangsu, China jinjian187@163.com

334 Jian Li College of Food Engineering, Harbin University of Commerce, Harbin, Heilongjiang, China lijian4852147@163.com

335 Jian Li Beijing Technology and Business University, Beijing, China lijian@th.btbu.edu.cn

336 Jian PanSchool of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China

justinpan@zju.edu.cn

337 Jian Xu Ningbo University, Ningbo, Zhejiang, China 825280886@qq.com

338 Jian Yu Water Resources Research Institute of Inner Mongolia, Hohhot City Inner Mongolia, China 　

339 Jian Zhuang College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China zhuangjian_2001@163.com

340 Jianbo Di College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China 1091309383@qq.com

341 Jianfen LiangCol lege of Food Sc ience and Nut r i t iona l Engineering, China Agricultural Engineering, Beijing, China

donghj97@163.com

342 Jianfeng SunCollege of Food Science and Technology, Agricultural University of Hebei, Baoding, Hebei, China

causunjf@126.com

343 Jianfeng Zhou Washington State University, USA jianfeng.zhou@wsu.edu

344 Jiang XuCollege of Mechanical and Electronic Engineering, Shandong Agricul tural Universi ty, Tai 'an, Shandong, China

xu903524569@163.com

345 Jiangchang Li College of Electromechanical Engineering, Hebei Agricultural University, Baoding, Hebei, China ljch@hebau.edu.cn

346 Jiangtao Qi Terrain-Machine Bionics Engineering Lab, Jilin University, Changchun, Jilin, China qijiangtao2008@qq.com

347 Jianhan Lin Key Laboratory of Agri-Information, Ministry of Agriculture, P. R. China jianhan@cau.edu.cn

348 Jianjun Du Bei j ing Research Cente r fo r In format ion Technology in Agriculture, Beijing, China dujj@nercita.org.cn

349 Jianjun Yin Institute of Agricultural Engineering, Jiangsu University, Zhenjiang, Jiangsu, China yinjianjun@ujs.edu.cn

350 Jianjun Zhao College of Engineering, China Agricultural University, Beijing, China perc_zjj@126.com

351 Jianlong ZhouBureau of Agricultural Mechanization Management, Agriculture Bureau of HeilongJiang Agricultural Reclamation Department, Heilongjiang, China

Zhoujianlong0451@163.com

352 Jianning Yuan Department of mechanical engineering, Nanjing Institute of Technology, Nanjing, Jiangsu, China jnyuan@njit.edu.cn

353 Jiannong Xin University of Florida, Institute of Food and Agricultural Sciences, USA xin@ufl.edu

354 Jianping Hu

Key Laboratory of Modern Agricultural Equipment and Technology, Ministry of Education, Jiangsu Province, Jiangsu University, Zhenjiang, Jiangsu, China

hujp@ujs.edu.cn

355 Jianping LiDepartment of agricultural mechanization, College of Electromechanical Engineering, Hebei Agricultural University, Baoding, Hebei, China

ljpnd327@126.com

356 Jianping LiCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China

jpli@zju.edu.cn

357 Jianping Wang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China a4690976@sina.com

358 Jianqiao Li Jilin University, Changchun, Jilin, China jqli@jlu.edu.cn

359 Jiantao Liu Terrain-Machine Bionics Engineering Lab, Jilin University, Changchun, Jilin, China 991285762@qq.com

360 Jianwen Lu College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China jianwenlu2012@126.com

361 Jianxi ZhuCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China

21213051@zju.edu.cn

362 Jianxia Kuang College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China

sharon_kuang1989@163.com

363 Jianxu Wang College of Information and Electrical Engineering, China Agricultural University, Beijing, China wangjianxu085@sina.com

364 Jianzhu Zhao College of Engineering, China Agricultural University, Beijing, China zyfde@126.com

365 Jiao Wang China Agricultural University, Beijing, China lyc1840@126.com

366 Jiaoyang Pu School of Water Resources and Environment, China University of Geosciences, Beijing, China sunny19890425@126.com

367 Jiasheng WangCollege of Mechanical and Electrical Engineering, Qingdao Agricultural University, Qingdao, Shandong, China

jiasheng0813@163.com

368 Jiaxing Xie South China Agricultural University weixing@scau.edu.cn

369 Jichun Ma Shandong Academy of Agricultural Mechanization Sciences, Jinan, Shandong, China ma77360@sina.com

370 Jie Li Sichuan Research & Design Institute of Agricultural Machinery, Chengdu, Sichuan, China 1749902108@qq.com

371 Jie Liu College of Engineering, China Agricultural University, Beijing, China liujie@mail.hzau.edu.cn

372 Jie Wen China Institute of Water Resources and Hydropower Research, Beijing, China 　

373 Jieqiang Zhuo Beijing Agricultural Machinery Institute, Beijing, China zhuojq@163.com

374 Jihe Cai Changzhou Institute of Technology, Changzhou, Jiangsu, China crane19810202@163.com

375 Jin He College of Engineering, China Agricultural University, Beijing, China hejin@cau.edu.cn

376 Jin Tang Jilin University, Changchun, Jilin, China 56281233@qq.com

377 Jin Tong College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China jtong@jlu.edu.cn

378 Jin Wang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China wangjin@caams.org.cn

379 Jin Zhao College of Electromechanical Engineering, Hebei Agricultural University, Baoding, Hebei, China zhaojin8608@163.com

380 Jinbing Hu Zhejiang University, Hangzhou, Zhejiang, China kingbinhu@126.com

381 Jinfu Wang Chery Heavy Industry Co., Ltd, China wangjun@detank.com.cn

382 Jing Gan China Agricultural University, Beijing, China keaiganjing@126.com

383 Jing GuoCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China

zhongforever2oo9@163.com

384 Jing Li Chinese Academy of Agricultural Mechanization Sciences, Beijing, China jijing1113@hotmail.com

385 Jing Lin College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning China synydxlj69@163.com

386 Jing Liu Guizhou Institute of Mountain Agricultural Mechanization, China 1158602622@qq.com

387 Jing Sun Chinese Academy of Agricultural Engineering, Beijing, China cynthiasj@163.com

388 Jing Zhao College of Information and Electrical Engineering, China Agricultural University, Beijing, China liangliang254@126.com

389 Jingguang Qin Chinese Society for Agricultural Engineering, China hqcsae@agri.ogv.cn

390 Jinghui XuCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China

x36936@gmail.com

391 Jingjing Zhang College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China z745297458@qq.com

392 Jingliang Wang College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China 403239612@qq.com

393 Jinguang Zhu Foton Lovol International Heavy Industry Co., Ltd., Weifang, Shandong, China zhujinguang@lovol.com.cn

394 Jinguo ZhangDepartment of agricultural mechanization, College of Electromechanical Engineering, Hebei Agricultural University, Baoding, Hebei, China

zhangjinguo@hebau.edu.cn

395 Jingxu Wang College of Engineering, China Agricultural University, Beijing, China

WJXWJXWJX.good@163.com

396 Jingyun Zhang Henan University of Technology, Zhengzhou, Henan, China

zhangjingyun6832@163.com

397 Jinhui Zhao Chinese Academy of Agricultural Mechanization Sciences, Beijing, China zhaojh281@163.com

398 Jinhui Zhou College of Information and Electrical Engineering, China Agricultural University, Beijing, China tecyle@163.com

399 Jinjiang Zhang Guangdong Agri-machinery Research Institute, Guangzhou, Guangdong, China zjj@gddrying.com

400 Jinkun Pan Nanjing Institute of Technology, Nanjing, Jiangsu, China supermicro@vip.sina.com

401 Jinling Cong College of Mechanical and Electronic Engineering, Shihezi University, Shihezi, Xinjiang, China congjl_shz@sina.com

402 Jiqin Ni Purdue University, USA jiqin@purdue.edu

403 Jirka Simunek University of California – Riverside, Czech Republic Jiri.Simunek@ucr.edu

404 Jirui DuCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China

836947300@qq.com

405 Jiulin SunInstitute of Geographic Sciences and Natural Resources Research, Chinese Academy of Sciences, Beijing, China

Sunjl@cern.ac.cn

406 Jiyu PengCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China

jypeng@zju.edu.cn

407 Jiyuan Liu Shandong Academy of Agricultural Mechanization Sciences, Jinan, Shandong, China ljyda@163.com

408 Jiyue Li Chinese Academy of Agricultural Engineering, Beijing, China lijiyue06@163.com

409 Jizhan Liu Jiangsu University, Zhenjiang, Jiangsu, China liujizhan@163.com

410 Jizhang Wang Institute of Agricultural Engineering, Jiangsu University, Zhenjiang, Jiangsu, China whxh@ujs.edu.cn

411 Joachim Mueller Universitaet Hohenheim, Germany joachim.mueller2304@web.de

412 Jocelyn Guertin Quebec City Convention Centre, Canada jguertin@convention.qc.ca

413 Joergensen Malene Danish Agriculture and Food Council, Denmark roejgaard@gmail.com

414 John Kenneth Schueller University of Florida, USA schuejk@ufl.edu

415 John Obiero University of Venda, Kenya pobiero2003@yahoo.com

416 John Reid John Deere, USA ReidJohnF@JohnDeere.com

417 John Shi Guelph Food Research Center, Agriculture and Agri-Food Canada, Canada johnshi2006@yahoo.ca

418 Joko Nugroho Wahyu Karyadi Gadjah Mada University, Indonesia jknugroho@ugm.ac.id

419 Jongwoo Ha Seoul National University, Republic of Korea hearty80@gmail.com

420 Joon Yong Kim Department of Biosystems Engineering, Seoul National University, Republic of Korea tombraid@snu.ac.kr

421 Jose Manuel Goncalves College of Agriculture of Coimbra, Portugal jmmg@esac.pt

422 José Miguel Aguilera CONICYT, Chile jmaguile@ing.puc.cl

423 Josef KienzleAgro-Industry Off icer, Infras t ructure and Engineering Services Unit, Rural Infrastructure and Agro-Industries Division, FAO

424 Joseph Davidson Washington State University-TriCities, USA joseph.ryan.davidson@gmail.com

425 Joseph Zulovich University of Missouri, USA ZulovichJ@missouri.edu

426 Jozef Grochowicz University of Vincent Pol, Poland jozef@jozefgrochowicz.com

427 Juan Zhao College of Engineering, China Agricultural University, Beijing, China cau.zhaojuan@gmail.com

428 Julian Francis Vincent International Society of Bionic Engineering, UK julian.vincent@cantab.net

429 Jumin Zhang College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China

ju_min_zhang@mail.hzau.edu.cn

430 Jun Bao Northeast Agricultural University, Harbin, Heilongjiang, China jbao@neau.edu.cn

431 Jun Cui Chinese Academy of Agricultural Engineering, Beijing, China cuijun6688@yahoo.com.cn

432 Jun Fu Terrain-Machine Bionics Engineering Lab, Jilin University, Changchun, Jilin, China mac086@126.com

433 Jun Gao Kunming University of Science and Technology, Kunming, Yunnan, China 304470914@qq.com

434 Jun HuCollege of Engineering, Heilongjiang Bayi Agricultural University, Daqing, Heilongjiang, China

gcxyhj@126.com

435 Jun Li College of Information and Electrical Engineering, China Agricultural University, Beijing, China lijun2087@163.com

436 Jun Sun Jiangsu University, Zhenjiang, Jiangsu, China sun2000jun@ujs.edu.cn

437 Jun WangCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China

jwang@zju.edu.cn

438 Jun Wang Jilin University, Changchun, Jilin, China 465669503@qq.com

439 Jun Wei Nanjing Institute of Technology, Nanjing, Jiangsu, China 1290216048@qq.com

440 Jun ZhangInstitute of Soil and Water Conservation, Chinese Academy of Sciences,Ministry of Water Resources, Yangling, Shaanxi, China

1992zhangjun.love@163.com

441 Junan Liu China Agricultural University, Beijing, China 806189827@qq.com

442 Junfa Hao Chinese Academy of Agricultural Mechanization Sciences, Beijing, China 578984699@qq.com

443 Junfa Wang College of Mechanical Engineering, Jiamusi University, Jiamusi, Heilongjiang, China wangjunf2934@163.com

444 Junfeng Liu College of Mechanical Engineering, Hebei Agricultural University, Baoding, Hebei, China chlf0310@163.com

445 Junfeng Zhang Wuhan Institute of Agricultural Mechanization Sciences, Wuhan, Hubei, China 250593018@qq.com

446 Jungang Wang Jiangxi Association for Agricultural Mechanization, China lixinjin7610@sina.com

447 Junguo Liu School of Nature Conservation, Beijing Forestry University, Beijing, China junguo.liu@gmail.com

448 Junhu Cheng School of Light Chemistry and Food Science, South China University of Technology, Guangzhou, China cjunhu@gmail.com

449 Junjie Xue China Agricultural University, Beijing, China xjj19890305@126.com

450 Junmin Yang Yunnan Institute of Agricultural Mechanization Sciences, Yunnan, China yjmynkm@sina.com

451 Junming Hou College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China junming_hou@163.com

452 Junning Zhang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China zjn990210@163.com

453 Junwei Cui Modern Agricultural Equipment Co., Ltd., Beijing, China cuijw83@126.com

454 Juraj Maga Slovak University of Agriculture in Nitra,, Slovakia juraj.maga@uniag.sk

455 K.C. Ting University of Illinois at Urbana-Champaign, USA kcting@illinois.edu

456 Kai Peng College of Engineering, China Agricultural University, Beijing, China pengkai1016@126.com

457 Kaifeng LiMAE Northern Co. Ltd., Chinese Academy of Agricultural Mechanization Sciences, Beijing, China

likaifeng1314@163.com

458 Kaixuan ZhaoCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China

68046211@qq.com

459 Kang Tu Nanjing Agricultural University, Nanjing, Jiangsu, China kangtu@njau.edu.cn

460 Kehinde Adedeji Adekola Jilin University, Nigeria profkola@sina.com

461 Keming DuIns t i tu te of Environment and Susta inable Development in Agriculture, China Academy of Agricultural Sciences, Beijing, China

dukeming@caas.cn

462 Kenji Omasa The University of Tokyo, Japan aomasa@mail.ecc.u-tokyo.ac.jp

463 Kenneth A. Sudduth

USDA-ARS Cropping Systems and Water Quality Research Unit sudduthk@missouri.edu

464 Keqiang Yu Zhejiang University, Hangzhou, Zhejiang, China yuke406336022@gmail.com

465 Kerstin Jungbluth University of Bonn, Germany kerstin.jungbluth@web.de

466 Khansawanh Sisopha Kyushu University, Japan khansawanh@gmail.com

467 Kotwaliwale Nachiket Central Institute of Agricultural Engineering, India nachiket_k@yahoo.com

468 Koungveng Taing Kyushu University, Japan koungveng@yahoo.com

469 Kuichuan Sheng Zhejiang University, Hangzhou, Zhejiang, China kcsheng@zju.edu.cn

470 Kuishun Cui Heilongjiang Agricultural Machinery Repairing Institute, Harbin, Heilongjiang, China wxscui@139.com

471 Kun Yu Syngenta Biotechnology (China) Co., Ltd., Beijing, China Kun.Yu@syngenta.com

472 Kun Zhou University of Aarhus, Faculty of Science, Denmark kun.zhou@agrsci.dk

473 Kundian Wang College of Engineering , Huazhong Agricultural University, Wuhan, Hubei, China

wanpeng09@mail.hzau.edu.cn

474 Kunpeng Xue College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China xuekp2009@163.com

475 Kurpaska Slawomir Agricultural University in Kraków, Poland rtkurpas@cyf-kr.edu.pl

476 Kyo Suh Seoul National University, Republic of Korea kyosuh@snu.ac.kr

477 Kyosuke Yamamoto The University of Tokyo, Japan 8244012644@mail.ecc.

u-tokyo.ac.jp

478 Lalit R. Verma American Society of Agricultural and Biological Engineers, USA lverma@uark.edu

479 Lanxin Liu College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China liulanxin4119@163.com

480 Legang Wang Foton Lovol International Heavy Industry Co., Ltd., Weifang, Shandong, China sdwlg1965@126.com

481 Lei HeInstitute of Mechanical Equipment, Xinjiang Academy of Agricultural and Reclamation Science, Shihezi, Xinjiang, China

hl_sdjd@sohu.com

482 Lei Li College of Engineering , Huazhong Agricultural University, Wuhan, Hubei, China hzaulilei@qq.com

483 Lei Ren University of Manchester, UK lei.ren@manchester.ac.uk

484 Lei Wang College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China 997931130@qq.com

485 Lei Wang Zhejiang University, Hangzhou, Zhejiang, China wangleiabe@gmail.com

486 Leilei Zhang College of Engineering, China Agricultural University, Beijing, China caoyutian1987@sina.com

487 Leiqing Pan College of Food Technology and Sciences, Nanjing Agricultural University, Nanjing, Jiangsu, China panleiqing@hotmail.com

488 Li Gong Guangdong Agricultural Machinery Research Institute, Guangzhou, Guangdong, China 492880133@qq.com

489 Li Guo Jilin University, Changchun, Jilin, China liguo2012@jlu.edu.cn

490 Li Li College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China lichong8282@126.com

491 Li Li China Agricultural University, Beijing, China lily@cau.edu.cn

492 Li Ni China Agricultural University, Beijing, China nili131458@163.com

493 Li Yang China Agricultural University, Beijing, China yangli@cau.edu.cn

494 Li Ye Chinese Academy of Agricultural Mechanization Sciences, Beijing, China yeli.caams@gmail.com

495 Li Zhang College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China batonlili@126.com

496 Lianbang Zheng Bureau of Agricultural Machinery, Heilongjiang Agriculture Committee, Heilongjiang, China bgszlb@163.com

497 Liang Chen College of Oil and Food, Henan University of Technology, Zhengzhou, Henan, China chen_liang.cl@163.com

498 Liang Gong Shanghai Jiaotong University, Shanghai, China gongliang_mi@sjtu.edu.cn

499 Liang He Nanjing Agricultural University, Nanjing, Jiangsu, China liang_he@njau.edu.cn

500 Liang Jing School of Electrical and Information Engineering, Jiangsu University, Zhenjiang, Jiangsu, China jl517@126.com

501 Liang Meng Huazhong Agricultural University, Wuhan, Hubei, China 4662078@qq.com

502 Liang SunZhejiang Provincial Key Laboratory of Planting Equipment Technology, Zhejiang Sci-Tech University, Hangzhou, Zhejiang, China

liangsun@zstu.edu.cn

503 Liangfu ZhouNanjing Research Institute for Agricultural Mechanization, Ministry of Agriculture, Nanjing, Jiangsu, China

zhouliangfu@caas.cn

504 Lianhao Li China Agricultural University, Beijing, China lianhao8002@126.com

505 Liansun Wu Farm Technology Group, Wageningen, the Netherlands liansun.wu@wur.nl

506 Liaowen Huang College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China 736052399@qq.com

507 Lichun ZhangCollege of Mechanical and Electronic Engineering, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China

lichun_zhang1963@163.com

508 Lidi Wang College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China wanglidi@163.com

509 Liezhou Zhong Fuli Institute of Food Science, Zhejiang University, Hangzhou, Zhejiang, China zhongliezhou@163.com

510 Lifa Chai Hebei Agricultural University, Baoding, Hebei, China lifachaiwo888@126.com

511 Lifeng Fan College of Information and Electrical Engineering, China Agricultural University, Beijing, China 229670582@qq.com

512 Liguo Wei Chinese Academy of Agricultural Mechanization Sciences, Beijing, China weilg78@126.com

513 Lijing Liu Modern Agricultural Equipment Co., Ltd., Beijing, China xyliulj@sina.com

514 Lijuan Kong Shanxi Agricultural University, Taigu County, Shanxi, China 1029340623@qq.com

515 Lijuan Shi College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China shlij@cau.edu.cn

516 Lijuan XieCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China

ljxie@zju.edu.cn

517 Limei Tian Terrain-Machine Bionics Engineering Lab, Jilin University, Changchun, Jilin, China lmtian@jlu.edu.cn

518 Liming Xu China Agricultural University, Beijing, China xlmoffice@163.com

519 Liming Zhou Chinese Academy of Agricultural Mechanization Sciences, Beijing, China haibo1129@163.com

520 Lin ChenCollege of Mechanical and Electronic Engineering, Sichuan Agricultural University, Ya'an, Sichuan, China

lingchen121@163.com

521 Lin Luo Shandong Academy of Agricultural Mechanization Sciences, Jinan, Shandong, China sdnjskb@163.com

522 Lin Xue College of Information and Electrical Engineering, China Agricultural University, Beijing, China fairytalexl@cau.edu.cn

523 Lina Cheng School of Light Chemistry and Food Science, South China University of Technology, Guangzhou, China linake125@163.com

524 Lina Zhang College of Engineering, China Agricultural University, Beijing, China 974272599@qq.com

525 Lina Zhou College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China zhoulina976430@163.com

526 Linchang Wang Bureau of Reclamation, Ministry of Agriculture, P. R. China linchang652@qq.com

527 Ling Zhao College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China syzling@163.com

528 Lingying Zhao The Ohio State University, USA zhao.119@osu.edu

529 Linlin Wang College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China 785181537@qq.com

530 Linong GongCollege of Mechanical and Electronic Engineering, Qingdao Agricultural University, Qingdao, Shandong, China

gln2135@163.com

531 Liqing Zhao Qingdao Agricultural University, Qingdao, Shandong, China zhlq017214@163.com

532 Liu LiuCol l ege o f Food Eng inee r ing , Nor theas t Agricultural University, Harbin, Heilongjiang, China

gr89427@163.com

533 Liu Liu College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China liuliu@cau.edu.cn

534 Liu WangFaculty of Agriculture, Life and Environment Sciences, Zhejiang University, Hangzhou, Zhejiang, China

wangliually@126.com

535 Liubin LuoCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China

21213057@zju.edu.cn

536 Lixia HouCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China

hlx0924hyx@163.com

537 Lixin Wang Hebei University of Science and Technology, Shijiazhuang, Hebei, China ck_021@tom.com

538 Lixue ZhuCollege of Mechanical and Electronic Engineering, Zhongka i Un ive r s i t y o f Agr i cu l t u r e and Engineering, Guangzhou, Guangdong, China

zhulixue@163.net

539 Long Chen China Agricultural University, Beijing, China 1260963475@qq.com

540 Long Qi College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China qilong@scau.edu.cn

541 Longsheng FuCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China

fulsh@nwsuaf.edu.cn

542 Lu Lin Fuli Institute of Food Science, Zhejiang University, Hangzhou, Zhejiang, China 103624019@qq.com

543 Lu SunCol lege of Food Sc ience and Nut r i t iona l Engineering, China Agricultural Engineering, Beijing, China

602417569@qq.com

544 Luis Santos Pereira Technical University of Lisbon, Brazil luis.santospereira@gmail.com

545 Lujia Han College of Engineering, China Agricultural University, Beijing, China hanlj@cau.edu.cn

546 Lumkes John Purdue University, USA lumkes@purdue.edu

547 Luofang Wang Hunan Bureau of Agricultural Mechanization Management, China 　

548 Luowei Pei Zhejiang University, Hangzhou, Zhejiang, China luoweipei@zju.edu.cn

549 Luquan Ren Chinese Academy of Sciences, Beijing, China lqren@jlu.edu.cn

550 Lurui ZhangCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China

zhanglurui123@163.com

551 Luyu Ding China Agricultural University, Beijing, China ding8877@126.com

552 Macak Miroslav Slovak University of Agriculture in Nitra, Slovakia miroslav.macak@uniag.sk

553 Maki Taichi Kyushu University, Japan maki@affrc.go.jp

554 Malcolm Wegener The University of Queensland, Australia wmm831986@163.com

555 Man Luo School of Light Chemistry and Food Science, South China University of Technology, Guangzhou, China lmddream@126.com

556 Man Zhang China Agricultural University, Beijing, China 123251058@qq.com

557 Manjin Cheng Inner Mongolia Institute of Water Resource Sciences, Hohhot, Inner Mongolia, China chengmanjin@sina.com

558 Manquan ZhaoCollege of Mechanical and Electronic Engineering, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China

nmgzhaomq@163.com

559 Mao Zhang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China zhangmao@caams.org.cn

560 Marc Vanacht AG Business Consultants, USA marcvan8@me.com

561 Marcelo Dodson Argosy University, Brazil marcelododson@gmail.com

562 Marenya Moses University of Venda, South Africa moses.marenya@univen.ac.za

563 Maria Paula Amador Escola Superior Agráriade Coimbra, Portugal paula_amador@esac.pt

564 Mario García Petillo

Univers idad de la Repúbl ica-Facul tad de Agronomía, Uruguay mgarciap@fagro.edu.uy

565 Mark L. Wahlqvist Epidemiology & Preventive Medicine, Faculty of Medicine, Monash University, Australia 　

566 Mary Leigh Wolfe Virginia Tech, USA mlwolfe@vt.edu

567 Meghdad KhazaeeDepartment of Mechanics of Agricul tura l Machinery, Tarbiat Modares University, Tehran, Iran

khazaee.meghdad@ut.ac.ir

568 Meijia WangCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China

shuilingyi@126.com

569 Meisheng Jiang China Agricultural University, Beijing, China 10981751@qq.com

570 Meng Guan College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China

guanmeng.19880109@163.com

571 Meng Hu Shanghai Jiaotong University, Shanghai, China humenghan89@163.com

572 Meng LiuCollege of Vehicle and Traffic Engineering, Henan University of Science and Technology, Luoyang, Henan, China

zzli@haust.edu.cn

573 Meng WangCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China

10913005@zju.edu.cn

574 Meng Yang Terrain-Machine Bionics Engineering Lab, Jilin University, Changchun, Jilin, China 1014842379@qq.com

575 Meng YangCol lege of Food Sc ience and Nut r i t iona l Engineering, China Agricultural Engineering, Beijing, China

miyayang0210@163.com

576 Meng Zhang China Agricultural University, pact@cau.edu.cn

577 Mengchu Huang Shanghai Springer Information Consulting Services Co., Ltd, Shanghai, China

mengchu.huang@springer.com

578 Mengji Guo China Agricultural University, Beijing, China 617991573@qq.com

579 Merete Lyngbye Munters, Denmark merete.lyngbye@munters.dk

580 Mete Yiğit Akdeniz University, Turkey meteyigit@akdeniz.edu.tr

581 Miao Zhang China Agricultural University, Beijing, China zhangmiao@cau.edu.cn

582 Michael Ryan Trade and Agriculture Directorate, OECD 　

583 Michele Reba USDA-Agricultural Research Service, USA michele.reba@gmail.com

584 Mikio Umeda Graduate School of Agriculture, Kyoto University, Japan

cigr-gs2014@elam.kais.kyoto-u.ac.jp

585 Min Feng Office of Agriculture History Researches, China Agricultural University, Beijing, China 3151981@qq.com

586 Min Liu China Agricultural Machinery Testing Center, Ministry of Agriculture, China liumin@agri.gov.cn

587 Min WeiSchool of Agronomic Sciences and Engineering, Shandong Agricul tural Universi ty, Tai 'an, Shangdong, China

minwei@sdau.edu.cn

588 Ming Cui Chinese Academy of Agricultural Engineering, Beijing, China cm071401@sina.com

589 Ming Li Chinese Academy of Agricultural Engineering, Beijing, China lognum@126.com

590 Ming Sun College of Information and Electrical Engineering, China Agricultural University, Beijing, China sunming@cau.edu.cn

591 Ming WangLaboratory of Energy Dynamics, Northeast Agricultural University, Harbin, Heilongjiang, China

mwang211@163.com

592 Ming YaoCollege of Energy and Dynamics Engineering, Inner Mongolia University of Technology, Hohhot, Inner Mongolia, China

15446268@qq.com

593 Ming Zhu Chinese Academy of Agricultural Engineering, Beijing, China xdnycygcjsjc@163.com

594 Mingchuan Chen Shandong Academy of Agricultural Mechanization Sciences, Jinan, Shandong, China sangyunhong1@163.com

595 Mingfeng Liu College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China 489612459@qq.com

596 Mingfu Huang Guangxi Bureau of Agricultural Mechanization Management, Guangxi, China 　

597 Mingjin Xin College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China xinmj2005@163.com

598 Mingming XuCollege of Mechanical and Electrical Engineering, Nanjing Forestry University, Nanjing, Jiangsu, China

xmm08341@163.com

599 Mingsen Huang Nanjing Institute of Technology, Nanjing, Jiangsu, China hms_212@126.com

600 Mingyong Xie Nanchang University, Nanchang, Jiangxi, China 　

601 Mingyou WangNanjing Research Institute for Agriculture Mechanization， Ministry of Agriculture, Nanjing, Jiangsu, China

wmyss@126.com

602 Mingzhen Li College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China 13244699@qq.com

603 Mingzhu Hao College of Information Science and Technology, Ningbo University, Ningbo, Zhejiang, China 825280886@qq.com

604 Minin Vladislav North-West Research Institute of Agricultural Engineering & Electrification, Turkey minin.iamfe@mail.ru

605 Minli Yang College of Engineering, China Agricultural University, Beijing, China qyang@cau.edu.cn

606 Minzan Li China Agricultural University, Beijing, China limz@cau.educ.n

607 Mladen Todorovic CIHEAM-Mediterranean, Italy mladen@iamb.it

608 Mo Li Jilin University, Changchun, Jilin, China moli@jlu.edu.cn

609 Mo Li College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China limo@cau.edu.cn

610 Morten Dam Rasmussen Aarhus University, Denmark mdr@eng.au.dk

611 Mousong WuSchool of Water Resources and Hydropower Engineering, Wuhan University, Wuhan, Hubei, China

mswu027@sina.com

612 Moustafa Fadel UAE University, Canada mfadel@uaeu.ac.ae

613 Muhetar AishaBureau of Agricultural Machinery Management, Department of Agriculture and Animal Husbandry, Xinjiang, China

614 Muhua Liu College of Engineering, Jiangxi Agricultural University, Nanchang, Jiangxi, China suikelmh@sina.com

615 Na Duan College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China dnandyzhu@126.com

616 Na Li College of Electromechanical Engineering, Hebei Agricultural University, Baoding, Hebei, China res_lina@126.com

617 Na LiCollege of Mechanical and Electronic Engineering, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China

1043660305@qq.com

618 Na XuChina Western Energy and Environment Research Center, Lanzhou University of Technology, Lanzhou, Gansu, China

xuna1224@126.com

619 Naiqian Zhang Kansas State University, USA zhangn@ksu.edu

620 Namal Samarakoon

Industrial Development Officer for Agri-Business Development Branch, UNIDO 　

621 Namkyu Yun National Academy of Agricultural Science, Rural Development Administration, Republic of Korea ecas21@korea.kr

622 Nan Fu Soochow University, Suzhou, Jiangsu, China nan.fu@suda.edu.cn

623 Nan Wang College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China wangn1991@126.com

624 Nan XiaCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China

xianan@nwafu.edu.cn

625 Nanxin Chen China Agricultural University, Beijing, China cauchennanxin@126.com

626 Naoshi KondoLaboratory of Bio-Sensing Engineering, Division of Environmental Science & Technology Graduate School of Agriculture, Kyoto University, Japan

kondonao@kais.kyoto-u.ac.jp

627 Naoto Shimizu Hokkaido University, Japan shimizu@bpe.agr.hokudai.ac.jp

628 Nazneen Barday Postharvest Technology Lab, Stellenbosch University, Stellenbosch, CPT, South Africa nazneen@sun.ac.za

629 Neugebauer Maciej mak@uwm.edu.pl

630 Nick Sigrimis Ag. University of Athens, USA n.sigrimis@geomations.com

631 Nigel Hancock University of Southern Queensland, Australia hancockn@usq.edu.au

632 Nimmermark Sven Swedish University of Agricultural Sciences, Sweden sven.nimmermark@slu.se

633 Ning Liu College of Food Engineering, Harbin University of Commerce, Harbin, Heilongjiang, China wendingzi666@163.com

634 Ning Wang Oklahoma State University, USA ning.wang@okstate.edu

635 Ning YangInstitute of Tillage and Planting, Liaoning Academy of Agricultural Sciences, Shenyang, Liaoning, China

laasyn@163.com

636 Ningning Yao College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China 1426270998@qq.com

637 Noboru Noguchi Hokkaido University, Japan pact@cau.edu.cn

638 Norman Scott National Academy of Engineering/Cornell University, Cocos (Keeling) Islands nrs5@cornell.edu

639 Nozdrovicky Ladislav Slovak University of Agriculture in Nitra, Slovakia ladislav.nozdrovicky@uniag.

640 Ofner-Schroeck Elfriede LFZ Raumberg-Gumpenstein, Austria elfriede.ofner-schroeck@

raumberg-gumpenstein.at

641 Ogawa Yukiharu Chiba University, Japan ogwy@faculty.chiba-u.jp

642 Oleg MarchenkoAll-Russia Research Institute for Mechanization in Agriculture (GNUVIM Rossel khoz academyi), Ukraine

oleg072000@mail.ru

643 Olivares Diaz Edenio Hokkaido University, Japan edenito@gmail.com

644 Osman Yaldiz Depar tment of Farm Machinery, Akdeniz University, Antalya, Turkey yaldiz@akdeniz.edu.tr

645 Palacios-Vélez Óscar Luis

Postgrado de Hidrociencias, Campus Montecillo del Colegio de Postgraduados en Ciencias Agrícolas, Montecillo, Estado de México, México

opalacio@colpos.mx

646 Panpan Yuan College of Mechanical and Electronic Engineering, Shihezi University, Shihezi, Xinjiang, China ypp_shz@163.com

647 Papanastasiou Dimitris

Laboratory of Agricultural Engineering and Environment, Institute for Research and Technology of Thessaly, Centre for Research and Technology, Hellas, Greece

dkpapan@ireteth.certh.gr

648 Pavel Kic Czech University of Life Sciences, Czech Republic kic@tf.czu.cz

649 Peeyush Soni Asian Institute of Technology, Thailand soni.ait@gmail.com

650 Pei Huang College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China michaelpayson@163.com

651 Peichen Hou Bei j ing Research Cente r fo r In format ion Technology in Agriculture, Beijing, China houpc@nercita.org.cn

652 Peitong LiuCol lege of Food Sc ience and Nut r i t iona l Engineering, China Agricultural Engineering, Beijing, China

zmn1128@126.com

653 Peizeng Zhang Department of Agriculture of Shanxi, China 　

654 Peng Luo College of Mechanical Engineering, Tianjin University of Commerce, Tianjin, China pengluo@yeah.net

655 Pengcheng NieSchool of Biosystems Engineering and Food Sciences, Zhejiang University, Hangzhou, Zhejiang China

npc2012@zju.edu.cn

656 Pengfei ZhaoNational Engineering Research Center for Information Technology in Agriculture, Beijing, China

zhaopf@nercita.org.cn

657 Pengfei Zhao College of Information and Electrical Engineering, China Agricultural University, Beijing, China 476618426@qq.com

658 Perendeci Nuriye Akdeniz University, Engineering Faculty, Turkey aperendeci@akdeniz.edu.tr

659 Peter Groot Koerkamp Wageningen University, the Netherlands peter.grootkoerkamp@wur.nl

660 Peter Schulze Lammers University of Bonn, Germany lammers@uni-bonn.de

661 Phakwipha Sutthiwaree

College of Engineering, China Agricultural University, Beijing, China 1579541710@qq.com

662 Philippe Van Overbeke

Technology & Food Unit, Institute for Fisheries and Agricultural Research (ILVO), Belgium philippe.vanoverbeke@ilvo.

663 Pimentel-Bribiesca Luis

Forestry Department, Universidad Autónoma Chapingo, Mexico pimeluis@gmail.com

664 Ping Ai College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China aipingsz@163.com

665 Ping Li Farmland Irrigation Research Institute, Chinese Academy of Agricultural Sciences, Xinxiang, China firilp@163.com

666 Pingping Li Nanjing Forestry University, Nanjing, Jiangsu, China ppli@njfu.edu.cn

667 Pingyi Liu College of Engineering, China Agricultural University, Beijing, China liupingyi@cau.edu.cn

668 PurwokoHari Kuncoro

The United Graduate School of Agricultural, Indonesia kuncoro.hari@yahoo.com

669 Qian Chen Northeast Agricultural University, Harbin, Heilongjiang, China chenqianego7@126.com

670 Qian Zhang College of Mechanical and Electronic Engineering, Shihezi University, Shihezi, Xinjiang, China 1554608278@qq.com

671 Qian Zhang College of Mechanical Dynamics, Dalian Ocean University, Dalian, Liaoning, China zhangqian1115@163.com

672 Qiang Fu

International Joint Research Center for Persistent Toxic Substances (IJRC-PTS), School of Water Conservancy and Civil Engineering, Northeast Agricultural University, Harbin, China

fuqiang@neau.edu.cn

673 Qiao Wei College of Engineering, China Agricultural University, Beijing, China wq071@163.com

674 Qiaoli Wang College of Engineering, Beijing Forestry University, Beijing, China

wangqiaoli_1202@bjfu.edu.cn

675 Qiaomin ChenNanjing Research Institute for Agriculture Mechanization， Ministry of Agriculture, Nanjing, Jiangsu, China

nnncqm@163.com

676 Qiaona PanCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China

794442841@qq.com

677 Qiaoxia Yuan College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China qxyuan@mail.hzau.edu.cn

678 Qichang YangInst i tu te of Environment and Susta inable Development in Agriculture, China Academy of Agricultural Sciences, Beijing, China

yangqichang@caas.cn

679 Qin LiuNanjing Research Institute for Agriculture Mechanization， Ministry of Agriculture, Nanjing, Jiangsu, China

liuqin93@163.com

680 Qin Tong Royal Veterinary College, UK qtong@rvc.ac.uk

681 Qin Zhang Washington State University, USA qinzhang@wsu.edu

682 Qing Dong College of Engineering, China Agricultural University, Beijing, China dqjane@126.com

683 Qing Liu Chinese Academy of Agricultural Engineering, Beijing, China qingliu21@aliyun.com

684 Qing Liu College of Economics and Management, China Agricultural University, Beijing, China youthqing@163.com

685 Qing Xie China Agricultural University, Beijing, China gxy15@cau.edu.cn

686 Qing YangCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China

xnyangq@126.com

687 Qinghua Han Chinese Academy of Agricultural Mechanization Sciences, Beijing, China

hanqinghua1971@sina.com.cn

688 Qingjie Wang China Agricultural University, Beijing, China wangqingjie@cau.edu.cn

689 Qingmei CaoVehicle & Transportation Engineering Institute, Henan University of Science and Technology, Luoyang, Henan, China

cqm73@126.com

690 Qingsong Zhang College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China 497325386@qq.com

691 Qingting Liu College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China qingting@scau.edu.cn

692 Qingwen Chen Chinese Academy of Agricultural Mechanization Sciences, Beijing, China chenqingwen57@126.com

693 Qingyan Wang Beijing Academy of Agriculture and Forestry Sciences, Beijing, China qianman89308@126.com

694 Qingzhi Di College of Information and Electrical Engineering, China Agricultural University, Beijing, China zhaiqz@cau.edu.cn

695 Qiong He College of Engineering, China Agricultural University, Beijing, China joanrun@126.com

696 Qiong WuCollege of Information and Electrical Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China

wuqiong0615@sina.com

697 Qiulin Ma College of Engineering, China Agricultural University, Beijing, China MqL2014@cau.edu.cn

698 Quan Jia Chinese Academy of Agricultural Mechanization Sciences weilg78@126.com

699 Quanrong Jing Chinese Academy of Agricultural Mechanization Sciences, Beijing, China jingquanrong@sina.com

700 Quendler Elisabeth University of Natural Resources and Life Sciences, Austria

elisabeth.quendler@boku.ac.at

701 R. Cengiz Akdeniz Ege University, Turkey cengiz.akdeniz@ebiltem.ege.edu.tr

702 Radhey Lal Kushwaha University of Saskatchewan, Canada rlk899@campus.usask.ca

703 Ran Chen Shanghai Jiaotong University, Shanghai, China happyweiyu@sjtu.edu.cn

704 Randall Joseph Renze John Deere, USA RenzeRandallJ@JohnDeere.

705 Rani Kumudini Indian Ministry of Agriculture, India 　

706 Ratti Cristina Laval University, Canada Cristina.Ratti@fsaa.ulaval.ca

707 Ravi RatnayakeTrade and Investment Division, United Nations Economic and Social Commission for Asia and the Pacific

708 Rebogile R. Mphahlele Postharvest Technology Research, South Africa 17480019@sun.ac.za

709 Ren Du North China Institute of Airspace Engineering, Langfang, Hebei, China duren3118@sohu.com

710 Renfu Lu USDA/ARS, USA renfu.lu@ars.usda.gov

711 Reng LiangCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China

lianghao8131@163.com

712 Reyes Parra Juan Esteban Universidad del Bío-Bío, Chile jreyes@pehuen.chillan.

ubiobio.cl

713 Ricardo Darío Villalobos Carvajal Universidad del Bío-Bío, Chile r.villalobos@ubiobio.cl

714 Ricardo Oliano De Carvalho Federal University of Pelotas, Brazil ricardo.oliano@yahoo.com.

715 Richard John Godwin Royal Academy of Engineering, UK dickjillgodwin@waitrose.

716 Rika Kitamura Utsunomiya university, Japan rika1229.jp@gmail.com

717 Robin Paul INRA, France paul.robin@rennes.inra.fr

718 Roland W. Melse Wageningen University, New Zealand roland.melse@wur.nl

719 Roman Galik Slovak University of Agriculture in Nitra, Faculty of Engineering, Slovakia roman.galik@uniag.sk

720 Rong Xiang China Jiliang University, Hangzhou, Zhejiang, China xr_rongge@cjlu.edu.cn

721 Rong Zhou Chinese Academy of Agricultural Mechanization Sciences, Beijing, China zhourong@caams.org.cn

722 Rui Zhang Jilin University, Changchun, Jilin, China zhangrui@jlu.edu.cn

723 Ruihua Wei Tongji University, Shanghai, China weiruihua@tongji.edu.cn

724 Ruili Wang Shenyang Agricultural University, Shenyang, Liaoning, China rlwangsynd@163.com

725 Ruiwen Liu Chinese Society for Agricultural Machinery, China csam@caams.org.cn

726 Ruixiao Cui College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China 851678162@qq.com

727 Ruixiu Sui USDA-ARSCPSRU, USA ruixiu.sui@ars.usda.gov

728 Ruizhi Sun College of Information and Electrical Engineering, China Agricultural University, Beijing, China sunrz_cn@sina.com.cn

729 Rune Røjgaard Andreasen Danish Agriculture & Food Council, Denmark rra@lf.dk

730 Runmao WangSecretariat of International Society of Bionic Engineering, Jilin University, Changchun, Jilin, China

jlurmwang@126.com

731 Salvador Calvet Universitat Politecnica de Valencia, Spain salcalsa@upv.es

732 Sandro Liberatori Italian Body for Agricultural Mechanization and Engineering, UN 　

733 Sang Hun Kim Kangwon National University, Republic of Korea shkim@kangwon.ac.kr

734 Sarfert Andreas GKN Land Systems, Germany andreas.sarfert@gkn.com

735 Se Woon Hong M3-BIORES, KULeuven, Republic of Korea sewoon.hong@biw.kuleuven.be

736 Sebastian Kemper TU Braunschweig, Germany s.kemper@tu-braunschweig.de

737 Segura Ponce Luis Andrés Universidad del Bío-Bío, Chile lsegura@ubiobio.cl

738 Seiichi Oshita The University of Tokyo, Japan aoshita@mail.ecc.u-tokyo.ac.jp

739 Seiji Matsuo The University of Tokyo, Japan smatsuo@sys.t.u-tokyo.ac.jp

740 Seishi Ninomiya The University of Tokyo, Japan snino@isas.a.u-tokyo.ac.jp

741 Sennan SongDepartment of Vehicle Engineering, College of Engineering, China Agricultural University, Beijing, China

sennan0914@163.com

742 Seong-Heon Kim Gyeongsang National University, Republic of Korea rlatjdgjsdl@naver.com

743 Serkan Boyar Dept . of Agricul tura l Machinery, Fac. Of Agriculture, Süleyman Demirel Univ., Turkey sboyar35@gmail.com

744 Seth Manuwa Landmark University, Omuaran, Nigeria manuwaseth@rocketmail.com

745 Seyhun Yurdugul Abant Izzet BAYSAL University, Turkey yurdugul_s@ibu.edu.tr

746 Sha Li Dalian Ocean University, Dalian, Liaoning, China 634894053@qq.com

747 Sha Liu College of Engineering, China Agricultural University, Beijing, China shashaday@126.com

748 Shan LiInstitute of Water Resources and Hydro-electric Engineering, Xi'an University of Technology, Xi'an, Shaanxi, China

shanli0315@sina.cn

749 Shangfeng Du College of Information and Electrical Engineering, China Agricultural University, Beijing, China matlab_du@126.com

750 Shanjun Li College of Engineering, Huazhong Agricultural University， Wuhan, Hubei, China shanjunlee@163.com

751 Shanshan Qiu College of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China qiushanshan8080@163.com

752 Shanshan Song College of Electromechanical Engineering, Hebei Agricultural University, Baoding, Hebei, China 745201853@qq.com

753 shanshan Yan College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China 928394258@qq.com

754 Shanshan YuNanjing Research Institute for Agriculture Mechanization， Ministry of Agriculture, Nanjing, Jiangsu, China

37833125@qq.com

755 Shanshan Zhou College of Resources and Environment, Northwest A&F University, Yangling, Shaanxi, China sszhou33@126.com

756 Shaochun Ma Washington State University, USA shaochun.ma@wsu.edu

757 Shaohua Li Chinese Academy of Agricultural Mechanization Sciences, Beijing, China lishaohua@caams.org.cn

758 Shaojin WangCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China

shaojinwang@nwsuaf.edu.cn

759 Shaolong Wang Northeast Agricultural University, Harbin, Heilongjiang, China

wangshaolong1989@163.com

760 shaoping han Gansu Academy of Agricultural Mechanization Sciences, Lanzhou, Gansu, China gamshsp@163.com

761 Shaoping Qian Zhejiang University, Hangzhou, Zhejiang, China askqsp@zju.edu.cn

762 Shaozhong Kang China Agricultural University, Beijing, China kangsz@cau.edu.cn

763 Shaozhong LvCollege of Mechanical and Electrical Engineering, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China

lszies@163.com

764 Shasha Zhang College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China 905674566@qq.com

765 Shemshura Olga N.

Institute of Microbiology and Virology, Committee of Science, Ministry of Science and Education, Almaty, Republic of Kazakhstan

olga.m-sh@mail.ru

766 Sheng Liu Beijing Academy of Agriculture and Forestry Sciences, Beijing, China liusheng@nercv.org

767 Sheng Yin Beijing Technology and Business University, Beijing, China yinsheng@btbu.edu.cn

768 Shenghuo JiaNational Seed Processing Equipment Engineering Technology Research Center, Jiuquan, Gansu, China

Liugc@woksm.com

769 Shenglian Lu Bei j ing Research Cente r fo r In format ion Technology in Agriculture, Beijing, China shllu@126.com

770 Shichun Jian Shandong Academy of Agricultural Mechanization Sciences, Jinan, Shandong, China jscsh2002@163.com

771 Shifang Wang Shanxi Agricultural University, Taigu County, Shanxi, China 1273463680@qq.com

772 Shifeng Li College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China 13601336575@126.com

773 Shifu ShuInstitute of Agricultural Engineering, Jiangxi Academy of Agricultural Sciences, Nanchang, Jiangxi, China

59461764@qq.com

774 Shikun Sun Northwest A&F University, Yangling, Shaanxi, China ssksci@163.com

775 Shili Zhou College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China 421832398@qq.com

776 Shiming Sun Heilongjiang Institute of Agricultural Mechanical Engineering Science, Harbin, Heilongjiang, China ssmmok@126.com

777 Shiqiang Jia College of Information and Electrical Engineering, China Agricultural University, Beijing, China jiashiqiang@cau.edu.cn

778 Shouqi Yuan Jiangsu University, Zhenjiang, Jiangsu, China shouqiy@ujs.edu.cn

779 Shouzhi GuoCollege of Mechanical and Electronic Engineering, Shandong Agricul tural Universi ty, Tai 'an, Shandong, China

zhouziguo@hotmail.com

780 Shu Liu The University of Tokyo, Japan liu@bpe.en.a.u-tokyo.ac.jp

781 Shuai DongCollege of Mechanical and Electronic Engineering, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China

1210062229@qq.com

782 Shuai Wang College of Food Science and Technology, Shanghai Ocean University, Shanghai, China handsomew@foxmail.com

783 Shuangcheng Tang Xi'an University of Technology, Xi'an, Shaanxi, China shuangchengtang@126.com

784 Shufa ChenCollege of Mechanical Engineering, Huaihai Institute of Technology, Lianyungang, Jiangsu, China

csf7012@aliyun.com

785 Shufeng Han Deere & Co., USA shufenghan@gmail.com

786 Shuhua Li Bei j ing Research Cente r fo r In format ion Technology in Agriculture, Beijing, China lish@nercita.org.cn

787 Shuhua Wang Shanxi Academy of Agricultural Sciences, Taiyuan, Shanxi, China wangshty@163.com

788 Shujin Qiu College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China qiushujin120@qq.com

789 Shujun Li Chinese Academy of Agricultural Mechanization Sciences, Beijing, China lisj@caams.org.cn

790 Shujun Zhang School of Computing and Technology, UK szhang@glos.ac.uk

791 Shulin ChenSchool of Chemical and Biological Engineering, Washington State University, Pullman, WA 99164, USA

chens@wsu.edu

792 Shulin Hou College of Engineering, China Agricultural University, Beijing, China hsl010@126.com

793 Shumao Wang College of Engineering, China Agricultural University, Beijing, China wangshumao@cau.edu.cn

794 Shun Ren College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China 535844264@qq.com

795 Shun Zhang College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China zhangyizhong88@126.com

796 Shuping Liu Chinese Academy of Agricultural Mechanization Sciences, Beijing, China tree35@sohu.com

797 Shuqi Shang Qingdao Agricultural University, Qingdao, Shandong, China sqingnong@126.com

798 Shusheng XuCollege of Mechanical and Electronic Engineering, Qingdao Agricultural University, Qingdao, Shandong, China

xuss0319@163.com

799 Shuso Kawamura Hokkaido University, Japan shuso@bpe.agr.hokudai.ac.jp

800 Shuwen Wang Northeast Agricultural University, Harbin, Heilongjiang, China wswtr@163.com

801 Shuxi Tang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China 996358650@qq.com

802 Shuzhan Wang Henan University of Technology, Zhengzhou, Henan, China

www.wangshuzhan273@163.com

803 Shuzhen Hu Chinese Academy of Agricultural Mechanization Sciences, Beijing, China shuzhenhu@hotmail.com

804 Shuzhi Yuan China Agricultural University, Beijing, China yuansz1989@163.com

805 Si Chen School of Food Science and Biotechnology, Zhejiang Gongshang University, Zhejiang, China sichen31@hotmail.com

806 Silvio Lima INOVAGRI Institute, Brazil silviocarlos@inovagri.org.br

807 Solhee Kim Seoul National University, Republic of Korea solhee1101@snu.ac.kr

808 Solowiej Piotr University of Warmia and Mazury, Poland pit@uwm.edu.pl

809 Songbai Ma College of Engineering, China Agricultural University, Beijing, China masongbai@126.com

810 Songchao ZhangNanjing Research Institute for Agricultural Mechanization, Ministry of Agriculture, Nanjing, Jiangsu, China

51832898@qq.com

811 Songhao ShangState Key Laboratory of Hydroscience and Engineering, Department of Hydraulic Engineering, Tsinghua University, Beijing, China

shangsh@tsinghua.edu.cn

812 Songhuai Du College of Information and Electrical Engineering, China Agricultural University, Beijing, China songhuaidu@cau.edu.cn

813 Songming ZhuCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China

smzhu2@yahoo.com

814 Søren Pedersen University of Aarhus, Denmark soeren.pedersen@agrsci.dk

815 Sovatna Phon Kyushu University, Cambodia ruasovatna@yahoo.com

816 Sreekala Bajwa North Dakota State University, USA Sreekala.Bajwa@ndsu.edu

817 Stefan Mihina Slovak University of Agriculture, Slovakia stefan.mihina@uniag.sk

818 Stefan Pogran Slovak University of Agriculture in Nitra, Slovakia stefan.pogran@uniag.sk

819 Stegmaier Thomas ICBE, Germany thomas.stegmaier@itv-

820 Stella Vieira Biological Inst i tute, Experimental Center, Campinas, SP, Brazil smjvieira@gmail.com

821 Stephane Godbout IRDA, Canada stephane.godbout@gmail.com

822 Stephen Searcy Texas A&M University, USA s-searcy@tamu.edu

823 Steven R. Evett USDA Agricultural Research Service, USA steve.evett@ars.usda.gov

824 Steven Taylor Auburn University, USA taylost@auburn.edu

825 Stone Kenneth USDA-ARS, USA ken.stone@ars.usda.gov

826 Subo Tian College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China tiansubo@163.com

827 Suchao Ma Shandong Academy of Agricultural Mechanization Sciences, Jinan, Shandong, China sd88623685@126.com

828 Sue Nokes University of Kentucky, USA snokes@uky.edu

829 Sui Tan College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China tansuiyan@scau.edu.cn

830 Suming Chen Taiwan Agricultural Mechanization Research and Development Center, Taiwan, China schen@ntu.edu.tw

831 Sun Baoxia South China Agricultural University weixing@scau.edu.cn

832 Sun Sun Nanjing Agricultural University, Nanjing, Jiangsu, China 2013108067@njau.edu.cn

833 Sunok Chung Precision Agricultural Research Center, China Agricultural University, Beijing, China gpac@cau.edu.cn

834 Suxian Yang Huazhong Agricultural University, Wuhan, Hubei, China 120231345@qq.com

835 Suzhen WangNanjing Research Institute for Agriculture Mechanization， Ministry of Agriculture, Nanjing, Jiangsu, China

sophi99@126.com

836 Svend Morsing SKOV, Denmark smo@skov.com

837 Tabilo Munizaga Gipsy Elizabeth Universidad del Bío-Bío, Chile gtabilo@ubiobio.cl

838 Tadeusz Juliszewski rtjulisz@cyf-kr.edu.pl

839 Taehwan Ha Seoul National University, Republic of Korea crown85@snu.ac.kr

840 Tammo Steenhuis Cornell University, USA tammo@cornell.edu

841 Tao Cui College of Engineering, China Agricultural University, Beijing, China cuitao850919@163.com

842 Tao Lin University of Illinois at Urbana-Champaign, USA taolin1@illinois.edu

843 Tao WenCollege of Mechanical & Electrical Engineering, Centra l South Univers i ty of Fores t ry and Technology, Changsha, Hunan, China

wt207@sina.com

844 Tao Wu College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China wt55pub@scau.edu.cn

845 Tao Xu Heilongjiang Institute of Agricultural Mechanical Engineering Science, Harbin, Heilongjiang, China xutao740410@163.com

846 Taotao Mao College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China 1009070229@cau.edu.cn

847 Tavs Nyord Aarhus University, Denmark tavs.nyord@eng.au.dk

848 Teixeira Arthur University of Florida, USA atex@ufl.edu

849 Teng Ma Chinese Academy of Agricultural Mechanization Sciences, Beijing, China mateng@caams.org.cn

850 Teng Teen Lim University of Missouri, USA limt@missouri.edu

851 Tengfei Li College of Engineering, China Agricultural University, Beijing, China tengfeili333@163.com

852 Terry Howell, Jr. American Society of Agricultural and Biological Engineers, USA terry.howell@mckee.com

853 Theodoros Gialamas Technological Educational Institute, Greece gialamas@teilar.gr

854 Thomas Banhazi University of Southern Queensland, Australia ambanhazi65@gmail.com

855 Thomas Hanskarl Heinrich Jungbluth Germany Thomas.jungbluth@uni-

hohenheim.de

856 Thomas J. Trout USDA Agricultural Research Service, USA thomas.trout@ars.usda.gov

857 Thurner StefanInstitute for Agricultural Engineering and Animal Husbandry, Bavarian State Research Centre for Agriculture, Germany

st.thurner@gmx.de

858 Tianhu Liu South China Agricultural University, Guangzhou, China liuparalake@126.com

859 Tianjun Jing College of Information and Electrical Engineering, China Agricultural University, Beijing, China jtjy11@cau.edu.cn

860 Tiansheng Su Chinese Academy of Agricultural Mechanization Sciences, Beijing, China 515299257@qq.com

861 Tianshuai WangWater Conservancy and Civil Engineering College, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China

wangts_imau@163.com

862 Tiantao FengCollege of Mechanical and Electronic Engineering, Shandong Agricul tural Universi ty, Tai 'an, Shandong, China

fttao79@163.com

863 Tianyao Xu Chinese Academy of Agricultural Mechanization Sciences, Beijing, China xuty@caams.org.cn

864 Tianying Wang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China 82264819@qq.com

865 Tie Shi Heilongjiang Institute of Agricultural Mechanical Engineering Science, Harbin, Heilongjiang, China shtie88@126.com

866 Tiezhong Zhang China Agricultural University, Beijing, China wangliangju@gmail.com

867 Timothy Simalenga

1Centre for Coordina t ion of Agr icul tura l Research and development for Southern Africa (CCARDESA), Gaborone, Botswana

tsimalenga@gmail.com

868 Ting Li College of Information and Electrical Engineering, China Agricultural University, Beijing, China xxlt0310@163.com

869 Ting Yang Xi'an University of Technology, Xi'an, Shaanxi, China yt3628568@163.com

870 Tingmin Yu ARC, South Africa yut@arc.agric.za

871 Tingting NingInstitute of Soil and Water Conservation, Chinese Academy of Sciences,Ministry of Water Resources, Yangling, Shaanxi, China

ningting2012@126.com

872 Tong ChenCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China

chentong819@163.com

873 Tong Sun College of Engineering, Jiangxi Agricultural University, Nanchang, Jiangxi, China suntong980@163.com

874 Tonghai Liu Tianjin Agricultural University, Tianjin, China tonghai_1227@126.com

875 Toshinori Kimura Hokkaido University, Japan toshinori.kmr@gmail.com

876 Tuo ZhaoChina Western Energy and Environment Research Center, Lanzhou University of Technology, Lanzhou, Gansu, China

568674365@qq.com

877 Ukhyeon YEO Seoul National University, Republic of Korea uhyeo@snu.ac.kr

878 Ulrike Schimpf Institute of Agricultural and Urban Ecological, Germany

ulrike.schimpf@agrar.hu-berlin.de

879 Umezuruike Linus Opara Stellenbosch University, South Africa opara@sun.ac.za

880 Vadim Tsukor University of Applied Sciences Osnabrueck, Germany V.Tsukor@hs-osnabrueck.de

881 Van der Heyden Caroline Ghent University, Belgium caroline.vanderheyden@

882 Vilas Mahadeo Salokhe Kaziranga University, India vsalokhe@yahoo.com

883 Vladimir Krocko Slovak University of Agriculture in Nitra, Slovakia miroslav.zitnak@uniag.sk

884 Vladimir Rataj Slovak University of Agriculture in Nitra, Slovakia vladimir.rataj@uniag.sk

885 Vladislav Minin State Research Institution “North-West Research Institute of Agricultural Engineering and Electrification”, Russia minin@mail.rcom.ru

886 Wang Wang College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China

wangyuanyuan@mail.hzau.edu.cn

887 Wanglin He Heilongjiang Bayi Agricultural University, Daqing, Heilongjiang, China 1006898145@qq.com

888 Wangyuan Zong College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China zwy@mail.hzau.edu.cn

889 Wanlin Gao College of Information and Electrical Engineering, China Agricultural University, Beijing, China kevinfoster@163.com

890 Wegener Malcolm The University of Queensland, Australia malcolm.wegener@uq.edu.au

891 Wei Chen Inner Mongolia University of Technology, Hohhot, Inner Mongolia, China chenweidushui@163.com

892 Wei Cui Modern Agricultural Equipment Co., Ltd., Beijing, China 187372519@qq.com

893 Wei Deng Bei j ing Research Cente r fo r In format ion Technology in Agriculture, Beijing, China dengw@nercita.org.cn

894 Wei Guo The University of Tokyo, Japan guowei.net@gmail.com

895 Wei Hu Tianjin Agricultural Machinery Development and Service Center, Tianjin, China H17w@163.com

896 Wei Jiao Shandong Academy of Agricultural Mechanization Sciences, Jinan, Shandong, China 15865314803@163.com

897 Wei Li College of Engineering, China Agricultural University, Beijing, China liww@cau.edu.cn

898 Wei Lin Jilin University, Changchun, Jilin, China biglw@163.com

899 Wei Liu College of Engineering, China Agricultural University, Beijing, China 873613176@qq.com

900 Wei Lu College of Engineering, Nanjing Agricultural University, Nanjing, Jiangsu, China njaurobot@njau.edu.cn

901 Wei Song Institute of Agricultural Engineering, Jiangsu University, Zhenjiang, Jiangsu, China kimigly@126.com

902 Wei Tang China Agricultural University, Beijing, China wei_tang@cau.edu.cn

903 Wei Wang College of Engineering, China Agricultural University, Beijing, China playerwxw@cau.edu.cn

904 Wei Wang Col lege of Water Conservancy, Shenyang Agricultural University, Shenyang, Liaoning, China 1055445240@qq.com

905 Wei Wang College of Mechanical Engineering, Guangxi University, Nanning, Guangxi, China 358838106@qq.com

906 Wei XiangOffice of Teaching and Research in Agricultural Machinery , Hunan Agricultural University, Changsha, Hunan, China

451846166@qq.com

907 Wei YangFaculty of Modern Agriculture Engineering, Kunming University of Science and Technology, Kunming, Yunnan, China

1084406147@qq.com

908 Wei Zhang Civil Aviation University of China, Tianjin, China caucaslm@163.com

909 Wei Zhu College of Oil and Food, Henan University of Technology, Zhengzhou, Henan, China zhutingwei1990@163.com

910 Wei Zou Bei j ing Research Cente r fo r In format ion Technology in Agriculture, Beijing, China zouwei789456123@126.com

911 Weidong Ding Bureau of Agricultural Mechanization Management, Xinjiang Production and Construction Corps, China btdwd@sina.com

912 Weidong Jiang Shandong Wuzheng Group, China sdwz01@sohu.com

913 Weidong Shi Jiangsu University, Zhenjiang, Jiangsu, China wdshi@ujs.edu.cn

914 Weidong ZhuangCollege of Engineering, Heilongjiang Bayi Agricultural University, Daqing, Heilongjiang, China

81nd@163.com

915 Weihong Min Jilin Agricultural University, Changchun, Jilin, China renjun881022@163.com

916 Weihua Qin College of Electromechanical Engineering, Henan Agricultural University, Henan, China qinwh0808@126.com

917 Weijun Tian Jilin University, Changchun, Jilin, China tianweijun@jlu.edu.cn

918 Weimin Zhang College of Food Science and Technology, Hainan University, Haikou, Hainan, China zhwm1979@163.com

919 Weipeng Zhang China Agricultural University, Beijing, China 785196159@qq.com

920 Weiping Bi College of Engineering, Nanjing Agricultural University, Nanjing, Jiangsu, China bwp2012@163.com

921 Weiping Liu College of Resources and Environment, Southwest University, Chongqing, China 1582065872@qq.com

922 Weiqiang Fu National Research Center of Intelligent Equipment for Agriculture, Beijing, China fuwq@nercita.org.cn

923 Weiqiao Lv Chinese Academy of Agricultural Mechanization Sciences, Beijing, China 38980698@qq.com

924 Weitang Song College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China songchali@cau.edu.cn

925 Weiwei Si Chinese Academy of Agricultural Mechanization Sciences, Beijing, China lidaoyi1981@126.com

926 Weiwei Wang School of Food & Biological Engineering, Jiangsu University, Zhenjiang, Jiangsu, China wsjsdwww@126.com

927 Weixia Zhao China Institute of Water Resources and Hydropower Research, Beijing, China 　

928 Weixin ZhangInstitute of Agricultural Economy and Information, Jiangsu Academy of Agricultural Sciences, Nanjing, Jiangsu, China

nkyzwx@126.com

929 Weixing ZhuInstitute of Agricultural Electrification and Automation, Jiangsu University, Zhenjiang, Jiangsu, China

wxzhu@ujs.edu.cn

930 Weixiong WuCollege of Engineering, South China University of Technology/College of Mechanical and Electronic Engineering, Sichuan Agricultural University

wuwxy@126.com

931 Wen HanCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China

hanwt2000@126.com

932 Wenchao Lu Bei j ing Research Cente r fo r In format ion Technology in Agriculture, Beijing, China luwc@nercita.org.cn

933 Wenhai Wang College of Economics and Management, China Agricultural University, Beijing, China wenhai789@163.com

934 Wenhua Mao Chinese Academy of Agricultural Mechanization Sciences, Beijing, China mwh-924@163.com

935 Wenhui Cui College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China 942261412@qq.com

936 Wenjing Ling College of Information and Electrical Engineering, China Agricultural University, Beijing, China lingwenjing@cau.edu.cn

937 Wenlong Cao Jilin Academy of Agricultural Mechanization Sciences, Changchun, Jilin, China caowl@aliyun.com

938 Wenming Zong College of Engineering, Anhui Agricultural University, Hefei, Anhui, China wmzong@126.com

939 Wenxiu Wang College of Engineering, China Agricultural University, Beijing, China 1187714085@qq.com

940 Wenyu Yi Sichuan Research & Design Institute of Agricultural Machinery, Chengdu, Sichuan, China ywycd@163.com

941 Wenyu ZhangInstitute of Agricultural Economy and Information, Jiangsu Academy of Agricultural Sciences, Nanjing, Jiangsu, China

research@wwery.cn

942 Wenzhuo Wang College of Engineering, China Agricultural University, Beijing, China cauwwz@sina.com

943 Xia Li College of Mechanical and Electronic Engineering, Shihezi University, Shihezi, Xinjiang, China lixia0415@163.com

944 Xian Li Chinese Academy of Agricultural Sciences, Beijing, China lixian@qdio.ac.cn

945 Xian Liu Center for Agricultural Mechanization Technology Development and Extension, MOA, China liuxian@agri.gov.cn

946 Xianfa Fang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China fangxf@caams.org.cn

947 Xiang YinS c h o o l o f L i g h t I n d u s t r y & A g r i c u l t u r e Engineering, Shandong University of Technology, Zibo, Shandong, China

yinxiang2013@yahoo.co.jp

948 Xiangcai Zhang China Agricultural University, Beijing, China zxcai0216@163.com

949 Xiangdong Liu College of Mechanical Engineering, Jiamusi University, Jiamusi, Heilongjiang, China jiahuiyuyao@163.com

950 Xiangdong ShenWater Conservancy and Civil Engineering College, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China

gaochu0617@163.com

951 Xianghai Yan Henan University of Technology, Zhengzhou, Henan, China yanxianghai6093@163.com

952 Xianghong GuoCollege of Water Conservancy Sciences and Engineering, Taiyuan University of Technology, Taiyuan, Shanxi, China

xianghong7920@126.com

953 Xiangjiang Liu Zhejiang University, Hangzhou, Zhejiang, China xjliu@zju.edu.cn

954 Xiangjun Zou South China Agricultural University, Guangzhou, China xjzou1@163.com

955 Xiangqian DongDepartment of agricultural engineering, College of Engineering, China Agricultural University, Beijing, China

dxqian@cau.edu.cn

956 Xiangyu Song Sensors and Data Analysis Department, Lely Industries N.V., Maassluis, the Netherlands xsong@lely.com

957 Xianqi Li College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning China 08lixianqi@163.com

958 Xiansheng Zhang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China cnams@163.com

959 Xianwang LiNanjing Research Institute for Agriculture Mechanization，Ministry of Agriculture, Nanjing, Jiangsu, China

xw3871@163.com

960 Xiao Gao China Agricultural University, Beijing, China gaoxiaoyu000@163.com

961 Xiao Liu College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China liuxiao10160906@163.com

962 Xiao TanSchool of Water Resources and Hydropower Engineering, Wuhan University, Wuhan, Hubei, China

804717736@qq.com

963 Xiao YangWater Conservancy and Civil Engineering College, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China

analysisyang@sohu.com

964 Xiaobo Wang College of Mechanical Engineering, Guangxi University, Nanning, Guangxi, China wxbgxu@163.com

965 Xiaobo Zou School of Food & Biological Engineering, Jiangsu University, Zhenjiang, Jiangsu, China zou_xiaobo@ujs.edu.cn

966 Xiaochao Zhang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China zxc@mail.caams.org.cn

967 Xiaodan Wu Nanchang University, Nanchang, Jiangxi, China wuxiaodan0412@163.com

968 Xiaodong Gao Northwest A&F University, Yangling, Shaanxi, China doniao1@163.com

969 Xiaodong Guan Chinese Society for Agricultural Engineering, China hqcsae@agri.gov.cn

970 Xiaodong Li Chinese Academy of Agricultural Mechanization Sciences, Beijing, China lylixiaodong@163.com

971 Xiaodong Qiao Chinese Academy of Agricultural Mechanization Sciences, Beijing, China 182890557@qq.com

972 Xiaodong RenWater Conservancy and Civil Engineering College, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China

838540854@qq.com

973 Xiaodong ZhangCollege of Mechanical Engineering, Liaoning University of Petro-Chemical Technology, Fushun, Liaoning, China

xiaodong5337@126.com

974 Xiaofeng Li College of Mechanical Engineering, Guangxi University, Nanning, Guangxi, China 775376359@qq.com

975 Xiaohong Lee College of Economics and Management, China Agricultural University, Beijing, China leexiaohong@126.com

976 Xiaohui Qian Heilongjiang Institute of Agricultural Mechanical Engineering Science, Harbin, Heilongjiang, China qxh1964@sina.com

977 Xiaohui Zhang College of Mechanical Engineering, Shangdong Agricultural University, Tai'an, Shandong, China zhangxh@sdau.edu.cn

978 Xiaojiang ZhuBureau of Agricultural Machinery Management, Department of Agriculture and Animal Husbandry, Ningxia, China

yczhuxj@163.com

979 Xiaojun Shen Farmland Irrigation Research Institute, Chinese Academy of Agricultural Sciences, Beijing, China shenxiaojun8003@163.com

980 Xiaokang Li Gansu Academy of Agricultural Mechanization Sciences, Lanzhou, Gansu, China 13893211981@163.com

981 Xiaoli Liu China Agricultural University, Beijing, China a836809468@qq.com

982 Xiaolin Zhan College of Information and Electrical Engineering, China Agricultural University, Beijing, China 932315488@qq.com

983 Xiaoling SuCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China

604351230@qq.com

984 Xiaomin Mao China Agricultural University, Beijing, China maoxiaomin@tsinghua.org.cn

985 Xiaoming Wang Guangxi Academy of Agricultural Mechanization Sciences, China Gxnjyjy@163.com

986 Xiaoming Wei Chinese Academy of Agricultural Engineering, Beijing, China weixiaoming836@163.com

987 Xiaopeng Zhao Chinese Academy of Agricultural Mechanization Sciences, Beijing, China zhaoxp@caams.org.cn

988 Xiaoping Bai Jinhua Polytechnic College, Jinhua, Zhejiang, China baixiaopin@sia.cn

989 Xiaoping Jin College of Engineering, China Agricultural University, Beijing, China jinxp@cau.edu.cn

990 Xiaoqiang DuFaculty of Mechanical Engineering and Automation, Zhejiang Sci-Tech University, Hangzhou, Zhejiang, China

xqiangdu@zstu.edu.cn

991 Xiaorong LvCollege of Mechanical and Electronic Engineering, Sichuan Agricultural University, Ya'an, Sichuan, China

lxrxj@sohu.com

992 Xiaoshun Zhao College of Electromechanical Engineering, Hebei Agricultural University, Baoding, Hebei, China 13630851145@126.com

993 Xiaoxia Li College of Mechanical Engineering, Jiamusi University, Jiamusi, Heilongjiang, China lixiaoxia5566@126.com

994 Xiaoying Yu Bei j ing Research Cente r fo r In format ion Technology in Agriculture, Beijing, China yujiamaoer@163.com

995 Xiaoyu Zhou Chinese Academy of Agricultural Mechanization Sciences, Beijing, China 451440733@qq.com

996 Xibin DingCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China

waynenuaa@163.com

997 Ximei TianSecretariat of International Society of Bionic Engineering, Jilin University, Changchun, Jilin, China

txm@jlu.edu.cn

998 Xin He College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China hx_cau0609@126.com

999 Xin Lu Henan Academy of Agricul tural Sciences, Zhengzhou, Henan, China luxinvip@aliyun.com

1000 Xin MaoCollege of Engineering, Heilongjiang Bayi Agricultural University, Daqing, Heilongjiang, China

mx1631@163.com

1001 Xin Wang University of Shanghai for Science and Technology, Shanghai, China mylifexixi@126.com

1002 Xin Wang College of Information and Electrical Engineering, China Agricultural University, Beijing, China h09036@cau.edu.cn

1003 Xin Wang China Agricultural University, wangxin117@cau.edu.cn

1004 Xin YAN China Institute of Water Resources and Hydropower Research, Beijing, China wozhaoyanxin@163.com

1005 Xin Zhang Bei j ing Research Cente r fo r In format ion Technology in Agriculture, Beijing, China zhangguyepiao@163.com

1006 Xin Zhang College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China zhangxin@cau.edu.cn

1007 Xin ZhangCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China

346563175@qq.com

1008 Xin'an Zeng Institute of Modern Food Engineering, South China University of Technology, Guangzhou, China xazeng@scut.edu.cn

1009 Xinfeng Wang College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China 13366066515@126.com

1010 Xing Li Chinese Academy of Agricultural Mechanization Sciences, Beijing, China lixing356@126.com

1011 Xing Ma Shenyang Agricultural University, Shenyang, Liaoning, China maxing19870428@163.com

1012 Xingjian Sun Tongji University, Shanghai, China shi.hui.xian@163.com

1013 Xingjian Zuo Northwest A&F University, Yangling, Shaanxi, China 1165282586@qq.com

1014 Xingyao Hao Bei j ing Research Cente r fo r In format ion Technology in Agriculture, Beijing, China haoxy@nercita.org.cn

1015 Xinhui Wu College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China wuxinhui0321@163.com

1016 Xining Zhao Northwest A&F University, Yangling, Shaanxi, China xiningz@aliyun.com

1017 Xinjin Li Jiangxi Institute of Agricultural Mechanization Sciences, China zhangzhenfj@163.com

1018 Xinqun Zhou Chinese Academy of Agricultural Engineering, Beijing, China 704080474@qq.com

1019 Xinxin LiSchoo l o f Med ica l I n s t rumen t and Food Engineering, University of Shanghai for Science and Technology, Shanghai, China

lixinxin_19891110@163.com

1020 Xiong ZhaoFaculty of Mechanical Engineering and Automation, Zhejiang Sci-Tech University, Hangzhou, Zhejiang, China

zhaoxiong@zstu.edu.cn

1021 Xiongzhe Han Seoul National University, Republic of Korea han_xiongzhe@naver.com

1022 Xiulun Wang Mie University, Japan wang@bio.mie-u.ac.jp

1023 Xiumei Tang Beijing Academy of Agriculture and Forestry Sciences, Beijing, China xiumeitang6@126.com

1024 Xiuying Cao Huazhong Agricultural University, Wuhan, Hubei, China caoxy_hb@163.com

1025 Xiuying Tang College of Engineering, China Agricultural University, Beijing, China txying@cau.edu.cn

1026 Xiwen Luo South China Agricultural University, Guangzhou, China xwluo@scau.edn.cn

1027 Xiyin Gao College of Mechanical Engineering, Agricultural University of Heibei, Baoding, Hebei, China gaoxiyin@163.com

1028 Xu Liu College of Information and Electrical Engineering, China Agricultural University, Beijing, China liuxucau@163.com

1029 Xu Ma College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China maxu1959@scau.edu.cn

1030 Xu Sun College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China sunxuskm@163.com

1031 Xu ZhangCollege of Mechanical and Electronic Engineering, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China

1099499366@qq.com

1032 Xuan WangCol lege of Food Sc ience and Nut r i t iona l Engineering, China Agricultural Engineering, Beijing, China

wangxuan910524@gmail.com

1033 Xuebin Qi Farmland Irrigation Research Institute, Chinese Academy of Agricultural Sciences, Xinxiang, China 　

1034 Xuecheng Zhou College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China josuns@126.com

1035 Xuefeng Diao Sichuan Provincial Agricultural Department, Sichuan, China 　

1036 Xuegeng Chen Xinjiang Academy of Agricultural and Reclamation Science, Shihezi, Xinjiang, China 123893162@qq.com

1037 Xueguan Zhao China Agricultural University, Beijing, China zhaoxueguan.com@163.com

1038 Xuejun Yang Modern Agricultural Equipment Co.,Ltd., Beijing, China maec2431@163.com

1039 Xueling Wang College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China wxlshirley@126.com

1040 Xueping Li College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China hacky509@126.com

1041 Xueshuang Shi College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China shixueshuang356@163.com

1042 Xuewei Bai College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China baixueweicn@163.com

1043 Xujun Ye Hirosaki University, Japan yexujun@cc.hirosaki-u.ac.jp

1044 Xunlan Li Citrus Research Institute, Southwest University, Chongqing, China lixunlan2009@126.com

1045 Xuying LiCollege of Mechanical and Electronic Engineering, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China

lixuy2000@qq.com

1046 Ya Xin Huazhong Agricultural University, Wuhan, Hubei, China qxyuan@mail.hzau.edu.cn

1047 Yading Wang Institute of Bio-Chemical Engineering, Jiangsu University, Zhenjiang, Jiangsu, China 15751010272@163.com

1048 Yajiao Zhang College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China 287279783@qq.com

1049 Yaliang NiuDepartment of Electrical Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China

niuyaliang@163.com

1050 Yamei WuHohhot Branch, Chinese Academy of Agricultural Mechanization Sciences, Hohhot, Inner Mongolia, China

wuyamei527@sina.com

1051 Yameng XueInstitute of Food Science and Engineering, University of Shanghai for Science and Technology, Shanghai, China

xueyamenghpu@163.com

1052 Yan LongCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China

sdulongy@163.com

1053 Yan Yu Qingdao Agricultural University, Qingdao, Shandong, China yuyan20061108@126.com

1054 Yanbin LiCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China

yingchunfu@yeah.net

1055 Yanchao Zhang Zhejiang University yhe@zju.edu.cn

1056 Yanchen Yang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China caamsyyc@sina.com

1057 Yanfei Cao College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China caoyanfei@cau.edu.cn

1058 Yanfeng Li China Institute of Water Resources and Hydropower Research, Beijing, China yongqiand@niau.edu.cn

1059 Yang Chen College of Information and Electrical Engineering, China Agricultural University, Beijing, China yancychy@163.com

1060 Yang Ju College of Oil and Food, Henan University of Technology, Zhengzhou, Henan, China haoyueyinghai@126.com

1061 Yang Li College of Engineering, Nanjing Agricultural University, Nanjing, Jiangsu, China

1062 Yang Liu Chinese Academy of Agricultural Engineering, Beijing, China liuybj@126.com

1063 Yang Liu Chinese Academy of Agricultural Mechanization Sciences, Beijing, China liuy@caams.org.cn

1064 Yang Liu Chinese Academy of Agricultural Mechanization Sciences, Beijing, China liuybj@126.com

1065 Yang Tao Department of Bioengineering, University of Maryland, USA 　

1066 Yang Xu College of Engineering, China Agricultural University, Beijing, China xuyang@cau.edu.cn

1067 Yang Yang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China yang_yang2009@126.com

1068 Yang Yu School of Water Resources and Environment, China University of Geosciences, Beijing, China yuyang1914@gmail.com

1069 Yangchun Liu Chinese Academy of Agricultural Mechanization Sciences, Beijing, China lyc327@163.com

1070 Yangtai Liu University of Shanghai for Science and Technology, Shanghai, China lytsunspeed@live.cn

1071 Yanhai Tang Institute of Bio-Mechanical Electronic Engineering, Zhejiang University, Hangzhou, Zhejiang, China wywzju@zju.edu.cn

1072 Yanhao Li Chinese Academy of Agricultural Mechanization Sciences, Beijing, China 380755733@qq.com

1073 Yankun Peng College of Engineering, China Agricultural University, Beijing, China ypeng@cau.edu.cn

1074 Yanlei Yu Zhejiang Gongshang University, Hangzhou, Zhejiang, China yanleiyu@hotmail.com

1075 Yanlin Zhang College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China zhangyl@mail.hzau.edu.cn

1076 Yanqun Zhang China Institute of Water Resources and Hydropower Research, Beijing, China 　

1077 Yanru Guo College of Food Science and Technology, Shanghai Ocean University, Shanghai, China GYR900818@163.com

1078 Yanru Zhao Zhejiang University, Hangzhou, Zhejiang, China xiaoru19863804@sina.com

1079 Yanshui Zhao YTO Group Corporation, China zhaoys63@163.com

1080 Yanwen Lu Chinese Academy of Agricultural Mechanization Sciences, Beijing, China luyanwen@caams.org.cn

1081 Yanxiang ZhuResearch center of Fluid Machinery Engineering and Technology, Jiangsu University, Zhenjiang, Jiangsu, China

zhuyx1217@126.com

1082 Yanyao Wang Qingdao Agricultural University, Qingdao, Shandong, China wyy57@126.com

1083 Yao Li Hohhot Vocational College, Hohhot, Inner Mongolia, China 386630766@qq.com

1084 Yao Wu Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China wuyao.will@163.com

1085 Yaolun Zhang Faculty of Science and Technology, University of Macau, Macau, China allandzhang@hotmail.com

1086 Yaoming Li Institute of Agricultural Engineering, Jiangsu University, Zhenjiang, Jiangsu, China Prof_LYM@126.com

1087 Yapeng Li College of Mechanical Engineering, Nanjing Institute of Technology, Nanjing, Jiangsu, China 772303226@qq.com

1088 Yaqin Li College of Mechanical Engineering, Jiamusi University, Jiamusi, Heilongjiang, China lixiaoxia5566@163.com

1089 Yawei Ren Chinese Academy of Agricultural Engineering, Beijing, China yaweiren@163.com

1090 Yawei Zhang College of Engineering, China Agricultural University, Beijing, China zywcau@cau.edu.cn

1091 Yazhe Wang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China 2544689874@qq.com

1092 Yeseong Kang Gyeongsang University, Republic of Korea slow321@naver.com

1093 Yeseul Jo Seoul National University, Republic of Korea yeseul514@snu.ac.kr

1094 Yi ZhangInst i tu te of Environment and Susta inable Development in Agriculture, China Academy of Agricultural Sciences, Beijing, China

xingfu_536@163.com

1095 Yi Zhao China Agricultural University, Beijing, China pact@cau.edu.cn

1096 Yibao Ou Nanjing Institute of Technology, Nanjing, Jiangsu, China njis@163.com

1097 Yibin YingFaculty of Agriculture, Life and Environment Sciences, Zhejiang University, Hangzhou, Zhejiang, China

ybying@zju.edu.cn

1098 Yi-Chich Chiu National Ilan University, Taiwan, China yichiu55@gmail.com

1099 Yichuan Gao Wuhan Institute of Agricultural Mechanization Sciences, Wuhan, Hubei, China 516527517@qq.com

1100 Yifan HeCol lege of Food Sc ience and Nut r i t iona l Engineering, China Agricultural Engineering, Beijing, China

begforever@163.com

1101 Yifei Chen College of Information and Electrical Engineering, China Agricultural University, Beijing, China 983231817@qq.com

1102 Yikui Bai College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China baiyikui@163.com

1103 Yimin WeiInstitute of Agro-products Processing Science and Technology, Chinese Academy of Agricultural Sciences, Beijing, China

weiyimin36@126.com

1104 Yingchao Chen YTO Group Corporation, China tuolajixuehui@163.com

1105 Yingchun FuCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China

ycfu@zju.edu.cn

1106 Yingda Fu College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China fuyd13@mails.jlu.edu.cn

1107 Yingquan ZhangInstitute of Agro-products Processing Science and Technology, Chinese Academy of Agricultural Sciences, Beijing, China

zhangyingquan821@126.com

1108 Yingyi Chen College of Information and Electrical Engineering, China Agricultural University, Beijing, China chyingyi@126.com

1109 Yingyu Liu School of Life Sciences and Engineering, Nanchang University, Nanchang, Jiangxi, China 15270930217@163.com

1110 Yinhong KangCol l ege o f In fo rma t ion and Eng inee r ing Technology, Sichuan Agricultural University, Ya'an, Sichuan, China

kangyinhong@gmail.com

1111 Yitao Liao College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China liaoetao@gmail.com

1112 Yitian Zang China Agricultural University, Beijing, China zangyitian1@126.com

1113 Yiwei DongIns t i tu te of Environment and Susta inable Development in Agriculture, China Academy of Agricultural Sciences, Beijing, China

dongyiwei@caas.cn

1114 Yixiang Zhang College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China yxtdcq@163.com

1115 Yiyuan Ge College of Mechanical Engineering, Jiamusi University, Jiamusi, Heilongjiang, China geyiyuan@qq.com

1116 Yong Wu College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China cauwy@cau.edu.cn

1117 Yong Zhao Bei j ing Research Cente r fo r In format ion Technology in Agriculture, Beijing, China zhaoy@nercita.org.cn

1118 Yongchang Yu College of Mechanical Engineering, Henan Agricultural University, Zhengzhou, Henan, China hnyych@163.com

1119 Yongcheng Jiang College of Mechanical Engineering, Jiamusi University, Jiamusi, Heilongjiang, China jiangyongcheng@126.com

1120 Yongchong Li College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China liyongchong@cau.edu.cn

1121 Yonghong Yu Jiamusi University, Jiamusi, Heilongjiang, China yuyonghong1974@163.com

1122 Yong-Joo Kim Chungnam National University, Republic of Korea li_minzan@163.com

1123 Yongjun Zheng College of Engineering, China Agricultural University, Beijing, China zyj@cau.edu.cn

1124 Yonglei Li Chinese Academy of Agricultural Engineering, Beijing, China liyl0393@163.com

1125 Yongqian Ding Nanjing Agricultural University, Nanjing, Jiangsu, China yongqiand@njau.edu.cn

1126 Yongqian Wang College of Information and Electrical Engineering, China Agricultural University, Beijing, China 15210922593@126.com

1127 Yongqiang Cheng China Agricultural University, Beijing, China chengyq@cau.edu.cn

1128 Yongqing Du Gansu Bureau of Agricultural Mechanization Management, China gsnjjbgs@163.com

1129 Yongsen Xiong Jinhua Polytechnic College, Jinhua, Zhejiang, China 791228154@qq.com

1130 Yongsheng ChenNanjing Research Institute for Agriculture Mechanization， Ministry of Agriculture, Nanjing, Jiangsu, China

cys003@sina.com

1131 Yongwei WangCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China

wywzju@zju.edu.cn

1132 Yoshisuke Kishida Shin-Norinsha Co., Ltd, Japan ama@shin-norin.co.jp

1133 Youchun Ding College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China kingbug163@163.com

1134 Youqiang Shen Tianjin Tractor Manufacturing Corporation, Ltd., China yqshen121@126.com

1135 Yu Liu College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China 313524612@qq.com

1136 Yu Liu Bei j ing Research Cente r fo r In format ion Technology in Agriculture, Beijing, China liuyu@nercita.org.cn

1137 Yu Ru Nanjing Forestry University, Nanjing, Jiangsu, China superchry@163.com

1138 Yu Ya-xin Zhejiang Sci-Tech University, 49342205@qq.com

1139 Yu Zhang Graduate School of Agricultural and Life Sciences, University of Tokyo, Japan smithzhangyu@hotmail.com

1140 Yuan Wang College of Information and Electrical Engineering, China Agricultural University, Beijing, China wysmile@cau.edu.cn

1141 Yuanjun Fan College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China 512627140@qq.com

1142 Yubao Wang Northwest A&F University, Yangling, Shaanxi, China wyb0406@sina.com

1143 Yubin Lan USDA-ARS, USA yubin.lan@ars.usda.gov

1144 Yue Gao Jilin University, Changchun, Jilin, China gaoyuejl@163.com

1145 Yue GuoBureau of Agricultural Machinery, Department of Agriculture and Animal Husbandry, Inner Mongolia, China

gyue2000@126.com

1146 Yue Yu Zhejiang University, Hangzhou, Zhejiang, China yuyueoffice2012@126.com

1147 Yuebin Yan Anhui Institute of Agricultural Mechanization Sciences, China

1148 Yueming Yuan Jilin Agricultural University, Changchun, Jilin, China yym_jlu@163.com

1149 Yueqin LiuCollege of Mechanical and Electronic Engineering, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China

liuyueqin103@126.com

1150 Yuexia Chen College of Vehicle and Traffic Engineering, Jiangsu University, Zhenjiang, Jiangsu, China cyx08@126.com

1151 Yufei Jin Department of Marketing, Huiju China, Beijing, China 893208527@qq.com

1152 Yuhan Lin China Agricultural University, Beijing, China linyuhan0722@126.com

1153 Yuhuan Liu Nanchang University, Nanchang, Jiangxi, China liuyuhuan@ncu.edu.cn

1154 Yun Ding College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China dingyun@jlu.edu.cn

1155 Yun Zhou China Agricultural University, Beijing, China isa.zhou1222@gmail.com

1156 Yunpu Wang School of Life Sciences and Engineering, Nanchang University, Nanchang, Jiangxi, China wangyunpujiayou@163.com

1157 Yunwu Xiong China Agricultural University, Beijing, China yxiong@cau.edu.cn

1158 Yunxia Wang Nanjing Institute of Technology, Nanjing, Jiangsu, China wang-yunxia@njit.edu.cn

1159 Yunxiang Ye Washington State University, USA yunxiang.ye@email.wsu.edu

1160 Yuqiu Song Shenyang Agricultural University, Shenyang, Liaoning, China songyuqiusyau@sina.com

1161 Yuxuan Tian College of Information and Electrical Engineering, China Agricultural University, Beijing, China xiaot945@sina.com

1162 Yuying Yan University of Nottingham, UK yuying.yan@nottingham.ac.

1163 Za Kan College of Mechanical and Electronic Engineering, Shihezi University, Shihezi, Xinjiang, China kz-shz@163.com

1164 Zaichun ZhuangCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China

zhuangzaichun@163.com

1165 Zarei ElmiraCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China

eli_us87@yahoo.com

1166 Zdenko Tkac Slovak University of Agriculture in Nitra, Slovakia zdenko.tkac@uniag.sk

1167 Zebing Xing Shanxi Agricultural University, Taigu County, Shanxi, China xingzebing@aliyun.com

1168 Zeliha Bereket Barut

Cukurova University, Faculty of Agriculture, Department of Agricultural Machinery, Adana, Turkey

zbbarut@cu.edu.tr

1169 Zengde Han Modern Agricultural Equipment Co., Ltd., Beijing, China 1937170646@qq.com

1170 Zengling Yang College of Engineering, China Agricultural University, Beijing, China yangzengling@cau.edu.cn

1171 Zhandong Liu Farmland Irrigation Research Institute, Chinese Academy of Agricultural Sciences, Beijing, China lzddragon@163.com

1172 Zhanfeng HouCollege of Mechanical and Electronic Engineering, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China

njau-hzf@163.com

1173 Zhangbing Zhu College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China zhuzhangbing@163.com

1174 Zhangying YeCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China

yzyzju@zju.edu.cn

1175 Zhanhua Song Shandong Agricul tural Universi ty, Tai 'an, Shandong, China songzh6688@163.com

1176 Zhanming LiCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China

lizhanming1018@126.com

1177 Zhanyong Li Tianjing University of Science and Technology, Tianjin, China zyli@tust.edu.cn

1178 Zhaodong Li College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China 718902187@qq.com

1179 Zhaohua HouInstitute of Special Animal and Plant Sciences of China Academy of Agricultural Sciences, Changchun, Jilin, China

kevin19820427@163.com

1180 Zhaolei ZhangCollege of Mechanical and Electronic Engineering, Shandong Agricul tural Universi ty, Tai 'an, Shandong, China

zhangzhaolei218@126.com

1181 Zhen Li Kyushu University, Japan lizhen.kyushu@gmail.com

1182 Zhen Li Bei j ing Research Cente r fo r In format ion Technology in Agriculture, Beijing, China 785002393@qq.com

1183 Zhen LiCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China

1030217554@qq.com

1184 Zhen Zhang Fujian Academy of Agricultural Mechanization Sciences, China 3199638@163.com

1185 Zhenbang Wang Beijing Municipal Bureau of Agriculture, China bjnjb@sina.com

1186 Zhenbo Li China Agricultural University, Beijing, China zhenboli@gmail.com

1187 Zhenbo WeiFaculty of Agriculture, Life and Environment Sciences, Zhejiang University, Hangzhou, Zhejiang, China

weizhenbo115@126.com

1188 Zhendong Ke Gansu Academy of Agricultural Mechanization Sciences, Lanzhou, Gansu, China kezd2001@163.com

1189 Zheng Lou Chinese Academy of Agricultural Engineering, Beijing, China chris.lz@163.com

1190 Zheng Ma Institute of Agricultural Engineering, Jiangsu University, Zhenjiang, Jiangsu, China benmamazheng@gmail.com

1191 Zheng Yan Chinese Academy of Agricultural Engineering, Beijing, China bioyanzheng@sina.com

1192 Zhengbin Zhao Modern Agricultural Equipment Co., Ltd., Beijing, China 383465266@qq.com

1193 Zhengbo Zhu South China Agricultural University, Guangzhou, China zhuzhengbo12345@163.com

1194 Zhenghe Song China Agricultural University, Beijing, China songzhenghe@cau.edu.cn

1195 Zhenhua Duan College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China duanzhenhua1106@163.com

1196 Zhenjiang Zhou Department of Agro-ecology, Aarhus, Denmark Zhou.Zhenjiang@agrsci.dk

1197 Zhenwei Liang Institute of Agricultural Engineering, Jiangsu University, Zhenjiang, Jiangsu, China liangzhenwei518@126.com

1198 Zhenxiang XingCol lege of Water Conservancy and Civ i l Engineering, Northeast Agricultural University, Harbin, China

1199 Zhenxin Zhang Chinese Society for Agricultural Machinery, China zhangzhenxin83@163.com

1200 Zhenzhen Pang Hainan University, Haikou, Hainan, China luckypzz@163.com

1201 Zhi Qu College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China 1023891596@qq.com

1202 Zhi Wang College of Information and Electrical Engineering, China Agricultural University, Beijing, China wangzhi1100@163.com

1203 Zhi Zhang College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China zhzhang09@mails.jlu.edu.cn

1204 Zhifen Di Chinese Academy of Agricultural Engineering, Beijing, China zhaizhifen0821@163.com

1205 Zhigang Wang Jilin University, Changchun, Jilin, China zgwang@jlu.edu.cn

1206 Zhigang Zhang College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China scauzzg@tom.com

1207 Zhihua Cheng College of Engineering, China Agricultural University, Beijing, China chengzhihua@cau.edu.cn

1208 Zhihui Gao College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China 570814141@qq.com

1209 Zhijie Wang College of Information and Electrical Engineering, China Agricultural University, Beijing, China silentcross@sina.cn

1210 Zhi-Ming GuoIntelligent Detection Department, National Engineering Research Center for Information Technologies in Agriculture, China

guozm@nercita.org.cn

1211 Zhiming LuCollege of Information Science and Engineering, Shanxi Agricultural University, Taigu, Shanxi, China

luzhiming0104@163.com

1212 Zhiming Wang Jinhua Polytechnic College, Jinhua, Zhejiang, China jhcwzm@163.com

1213 Zhining Wang China Agricultural University, Beijing, China 305382565@qq.com

1214 Zhiping DiCollege of Mechanical Engineering, Inner Mongolia University of Technology, Hohhot, Inner Mongolia, China

ngdzhaizhiping@163.com

1215 Zhiqi Zheng College of Engineering, China Agricultural University, Beijing, China zhiqizheng@163.com

1216 Zhiqiang XiVehicle & Transportation Engineering Institute, Henan University of Science and Technology, Luoyang, Henan, China

sseekk@126.com

1217 Zhiwei Liu South China University of Technology, Guangzhou, China ken127851@qq.com

1218 Zhiwei Zhu South China University of Technology, Guangzhou, China zhwzhu@scut.edu.cn

1219 Zhiyan Zhou Agriculture and Aviation Engineering Center, South China Agricultural University, Guangzhou, China zyzhou@scau.edu.cn

1220 Zhiyong ZouCollege of Mechanical and Electronic Engineering, Sichuan Agricultural University, Ya'an, Sichuan, China

zouziyong111@163.com

1221 Zhiyuan Sun College of Information and Electrical Engineering, China Agricultural University, Beijing, China wzdjszy@cau.edu.cn

1222 Zhong Han Institute of Modern Food Engineering, South China University of Technology, Guangzhou, China fezhonghan@scut.edu.cn

1223 Zhong ZhouCollege of Mechanical and Electrical Engineering, Nanjing Forestry University, Nanjing, Jiangsu, China

1054804249@qq.com

1224 Zhongjia Chen Beijing Forestry University, Beijing, China chen_zhongjia@126.com

1225 Zhongli PanDepartment of Biological and Agricultural Engineering, University of California, Davis (UC Davis)

zlpan@ucdavis.edu

1226 Zhongliang Zhao Heilongjiang Institute of Agricultural Mechanical Engineering Science, Harbin, Heilongjiang, China zzl451@163.com

1227 Zhongwei Liang College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China Georgeansys@163.com

1228 Zhongxiang Zhu China Agricultural University, Beijing, China gxy15@cau.edu.cn

1229 Zhou Fan College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China qizhoufan@mail.hzau.edu.cn

1230 Zhou Haibo College of Mechanical Engineering, Jiamusi University, Jiamusi, Heilongjiang, China haibo_zhou@163.com

1231 Zhou Yang College of Engineering, South China University of Technology, Guangzhou, Guangdong, China yangzhou@scau.edu.cn

1232 Zhuang Wang Jiangsu University, Zhenjiang, Jiangsu, China 291817776@qq.com

1233 Zhuo Li College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China lizhuo_lin@163.com

1234 Zhuqing Ding College of Mechanical and Electronic Engineering, Shihezi University, Shihezi, Xinjiang, China dzq_shzdx@163.com

1235 Zihao LiuCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China

370073049@qq.com

1236 Ziyang Wang College of Information and Electrical Engineering, China Agricultural University, Beijing, China 1161787115@qq.com

1237 Zunfeng Tang Modern Agricultural Equipment Co., Ltd., Beijing, China 13621203392@139.com

1238 Zuoxi Zhao College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China zhao_zuoxi@hotmail.com

1239 Zusongying Zhao College of Engineering, China Agricultural University, Beijing, China 393230339@qq.com

september 17, 2014 wednesday morning 08:30-12:00

Documents

wednesday morning, october 24, 2018 · wednesday morning,...

wednesday morning, october 23, 2019 · wednesday morning,...

january 2019 - powhatan nursing home calendar.pdfpowhatan...

sunday monday tuesday wednesday thursday friday saturday...

wednesday morning, november 15, 2006...wednesday morning,...

wednesday morning, october 31, 2001 · 2019. 12. 11. ·...

wednesday 5 th september - morning

wednesday 12 th december - morning

wednesday 16 january 2013 – morning

wednesday morning

2000 emc at-a-glance wednesday morning, june 21, 2000...

toscanaelite.files.wordpress.com · web viewryanair...

morning announcements for wednesday, june 8, 2016

wednesday 22 june 2016 – morning

wednesday morning presentation

wednesday morning, ready to climb slieve donard

29th annual environmental...

morning announcements for wednesday, may 11, 2016

monday tuesday wednesday thursday friday morning english...

tuesday · 2017. 1. 9. · tuesday afternoon, january 10,...