series description: wilo-yonos maxo - atacsolutions.com · series description: wilo-yonos maxo atac...
Post on 30-Apr-2019
230 Views
Preview:
TRANSCRIPT
Series description: Wilo-Yonos MAXO
ATAC Solutions
01622 882400 / info@atacsolutions.com
Subject to change without prior notice. www.wilo.com 50 Hz EU 2013-07 1 / 29
2520151050 Q/m³/h0
2
6
8
10
12
4
H/m Wilo-Yonos MAXO
40/0,5-4
40/0,5-12
25/30/0,5-10
25/30/0,5-7
65/0,5-950/0,5-9
25/30/0,5-12
50/0,5-12
40/50/0,5-8
DesignGlandless circulation pump with threaded connection or flange connection,EC motor with automatic power adjustment.
ApplicationHot-water heating systems of all kinds, air-conditioning systems, closedcooling circuits, industrial circulation systems.
Type keyExample: Wilo-Yonos MAXO 30/0.5-12
Yonos MAXOHigh-efficiency pump (screw-end or flange-endpump), electronically controlled
30/ Nominal connection diameter
0.5-12 Nominal delivery head range [m]
Special features/product advantagesMaximum efficiency thanks to ECM technology•LED display for showing delivery head setting•Quick and convenient electrical connection with Wilo-Connector•Collective fault signal on all types for assuring system availability•Simple installation due to PN 6/PN 10 combination flanges (with DN 40to DN 65)
•
Can be used in cooling/air-conditioning systems without ambienttemperature limits
•
Pump housing with cataphoretic coating for preventing corrosion dueto condensation formation
•
Equipment/functionOperating modes
Δp-c for constant differential pressure•Δp-v for variable differential pressure•
Manual functionsOperating mode setting•Setting of pump output (delivery head)•
Automatic functionsVariable power adjustment depending on the operating mode•Deblocking function•Soft start•Integrated full motor protection•
Signal and display functionsCollective fault signal (potential-free NC contact)•Fault signal light•LED segment display for displaying the delivery head and fault codes•
EquipmentWrench attachment point on pump body (for threaded pipe unionpumps)
•
Quick electrical connection with Wilo-Connector. For the connectionof the mains and SSM lines, with integrated strain relief
•
For flange-end pumps: Flange versions•Standard version for DN 40 to DN 65 pumps: PN 6/10 combinationflange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16counter flanges
•
Scope of deliveryPump•Including gaskets for threaded connection•Incl. washers for flange screws (for nominal connection diametersDN 40 - DN 65)
•
Including installation and operating instructions•
AccessoriesScrewed connections for threaded connection•Adapter fittings•Thermal insulation•
Duty chart: Wilo-Yonos MAXO
ATAC Solutions
01622 882400 / info@atacsolutions.com
Subject to change without prior notice. www.wilo.com 50 Hz EU 2013-07 2 / 29
Pump curves
25/30/0,5-7
40/50/0,5-8
50/0,5-9
65/0,5-9
25/30/0,5-10
40/0,5-12
40/0,5-4
0 5 10 15 20 25 Q/m³/h0
2
4
6
8
10
12
H/mWilo-Yonos MAXO
25/30/0,5-12
50/0,5-12
Product list: Wilo-Yonos MAXO
ATAC Solutions
01622 882400 / info@atacsolutions.com
Subject to change without prior notice. www.wilo.com 50 Hz EU 2013-07 3 / 29
Type Pipeconnection
Nominal flangediameter
Rated pressure Overall length Mainsconnection
Gross weight Art no.
PN / bar l0 / mm m / kg
Yonos MAXO 25/0,5-7 Rp 1 10 180 1~230 V, 50/60 Hz 5.8 2120639
Yonos MAXO 25/0,5-10 Rp 1 10 180 1~230 V, 50/60 Hz 5.8 2120640
Yonos MAXO 25/0,5-12 Rp 1 10 180 1~230 V, 50/60 Hz 6.9 2120641
Yonos MAXO 30/0,5-7 Rp 1¼ 10 180 1~230 V, 50/60 Hz 5.9 2120642
Yonos MAXO 30/0,5-10 Rp 1¼ 10 180 1~230 V, 50/60 Hz 5.9 2120643
Yonos MAXO 30/0,5-12 Rp 1¼ 10 180 1~230 V, 50/60 Hz 7 2120644
Yonos MAXO 40/0,5-4 DN 40 6/10 220 1~230 V, 50/60 Hz 10.2 2120645
Yonos MAXO 40/0,5-8 DN 40 6/10 220 1~230 V, 50/60 Hz 10.8 2120646
Yonos MAXO 40/0,5-12 DN 40 6/10 250 1~230 V, 50/60 Hz 14.9 2120647
Yonos MAXO 50/0,5-8 DN 50 6/10 240 1~230 V, 50/60 Hz 12.1 2120649
Yonos MAXO 50/0,5-9 DN 50 6/10 280 1~230 V, 50/60 Hz 16.1 2120650
Yonos MAXO 50/0,5-12 DN 50 6/10 280 1~230 V, 50/60 Hz 16.1 2120651
Yonos MAXO 65/0,5-9 DN 65 6/10 280 1~230 V, 50/60 Hz 18 2120653
Data sheet: Wilo-Yonos MAXO 25/0,5-7
ATAC Solutions
01622 882400 / info@atacsolutions.com
Subject to change without prior notice. www.wilo.com 50 Hz EU 2013-07 4 / 29
Pump curves
0 1 2 3 4 5 6 7
0 0,4 0,8 1,2 1,6 2,0
0 1 2 3 4
0
1
2
3
4
5
6
7
0
10
20
30
40
50
60
70
0 1 2 3 4 5 6 70
50
100
150
max.
p/kPaWilo-Yonos MAXO25/0,5-7, 30/0,5-71~230 V - Rp 1, Rp 1¼
H/m
Δp-cP1/W
m/s
vRp 1
Rp 1¼
Q/l/s
Q/m³/h
Q/m³/h
0 0,5 1,0 1,5 2,0 2,5
Q/m³/h
Δp-vP1/W
6m7m 5m 4m 3m
2m
1m0,5m
max.
0 1 2 3 4 5 6 70
50
100
150max.
6m7m 5m 4m 3m
2m
Dimension drawing
18
0
90
11
3
44 180
G 1½5151
90
Terminal diagram
L1 L3
L2 L3
L1 L2
PE SSM
3~230 V, 50/60 Hz
L N PE SSM
1~ 230 V, 50/60 Hz
SSM:
Collective fault signal(NC contact according to VDI 3814, load capacity 1 A,250 V ~)For function, see Wilo catalogue, chapter "Pumpmanagement Wilo control, planning guide"
Approved fluids (other fluids on request)
Heating water (in accordance with VDI2035)
•
Water-glycol mixtures (max. 1:1; above20% admixture, the pumping datamust be checked)
•
Permitted field of application
Temperature range at max. ambienttemperature +40 °C
-20...+110 °C
Maximum permissibleoperating pressure
Pmax 10 bar
Pipe connections
Threaded pipe union Rp 1
Thread G 1½
Overall length l0 180 mm
Motor/electronics
Energy efficiency index (EEI) ≤ 0.23
Electromagnetic compatibility EN 61800-3
Emitted interference EN 61000-6-3
Interference resistance EN 61000-6-2
Speed control Frequency converter
Protection class IP X4D
Insulation class F
Mains connection 1~230 V, 50/60 Hz
Nominal motor power P2 90 W
Speed n 1000 - 3700 rpm
Power consumption P1 5 - 120 W
Current consumption I 0.08 - 0.90 A
Motor protection integrated
Threaded cable connection PG M20x1.5
Materials
Pump housing Grey cast iron (EN-GJL-200)
Impeller Plastic (PPE - 30% GF)
Pump shaft Stainless steel (X46Cr13)
Bearing Carbon, metal impregnated
Minimum suction head at suction port for avoidingcavitation at water pumping temperature
Minimum suction head at 50 / 95 / 110°C
0.5 / 3 / 10 m
Data sheet: Wilo-Yonos MAXO 25/0,5-7
ATAC Solutions
01622 882400 / info@atacsolutions.com
Subject to change without prior notice. www.wilo.com 50 Hz EU 2013-07 5 / 29
Information for order placements
Make Wilo
Type Yonos MAXO 25/0,5-7
Art no. 2120639
Weight approx. m 4.50 kg
Data sheet: Wilo-Yonos MAXO 25/0,5-10
ATAC Solutions
01622 882400 / info@atacsolutions.com
Subject to change without prior notice. www.wilo.com 50 Hz EU 2013-07 6 / 29
Pump curves
0 2 4 6 8
0 0,5 1,0 1,5 2,0 2,5
0 1 2 3 4 5
0
2
4
6
8
10
0
20
40
60
80
100
0 2 4 6 80
50
100
150
max.
p/kPaWilo-Yonos MAXO25/0,5-10, 30/0,5-101~230 V - Rp 1, Rp 1¼
H/m
Δp-cP1/W
m/s
Q/m³/h
Q/l/s
Q/m³/h
v
max.
max.
6m7m8m9m10m 5m 4m
3m
2m
1m0,5m
Q/m³/h
Δp-vP1/W
0 2 4 6 80
50
100
150 6m7m8m9m10m
5m
3m
1,5m
4m
0 0,5 1,0 1,5 2,0 2,5 3,0 3,5
Rp 1
Rp 1¼
Dimension drawing
18
0
90
11
3
44 180
G 1½5151
90
Terminal diagram
L1 L3
L2 L3
L1 L2
PE SSM
3~230 V, 50/60 Hz
L N PE SSM
1~ 230 V, 50/60 Hz
SSM:
Collective fault signal(NC contact according to VDI 3814, load capacity 1 A,250 V ~)For function, see Wilo catalogue, chapter "Pumpmanagement Wilo control, planning guide"
Approved fluids (other fluids on request)
Heating water (in accordance with VDI2035)
•
Water-glycol mixtures (max. 1:1; above20% admixture, the pumping datamust be checked)
•
Permitted field of application
Temperature range at max. ambienttemperature +40 °C
-20...+110 °C
Maximum permissibleoperating pressure
Pmax 10 bar
Pipe connections
Threaded pipe union Rp 1
Thread G 1½
Overall length l0 180 mm
Motor/electronics
Energy efficiency index (EEI) ≤ 0.23
Electromagnetic compatibility EN 61800-3
Emitted interference EN 61000-6-3
Interference resistance EN 61000-6-2
Speed control Frequency converter
Protection class IP X4D
Insulation class F
Mains connection 1~230 V, 50/60 Hz
Nominal motor power P2 140 W
Speed n 1000 - 4400 rpm
Power consumption P1 5 - 190 W
Current consumption I 0.08 - 1.30 A
Motor protection integrated
Threaded cable connection PG M20x1.5
Materials
Pump housing Grey cast iron (EN-GJL-200)
Impeller Plastic (PPE - 30% GF)
Pump shaft Stainless steel (X46Cr13)
Bearing Carbon, metal impregnated
Minimum suction head at suction port for avoidingcavitation at water pumping temperature
Minimum suction head at 50 / 95 / 110°C
0.5 / 3 / 10 m
Data sheet: Wilo-Yonos MAXO 25/0,5-10
ATAC Solutions
01622 882400 / info@atacsolutions.com
Subject to change without prior notice. www.wilo.com 50 Hz EU 2013-07 7 / 29
Information for order placements
Make Wilo
Type Yonos MAXO 25/0,5-10
Art no. 2120640
Weight approx. m 4.50 kg
Data sheet: Wilo-Yonos MAXO 25/0,5-12
ATAC Solutions
01622 882400 / info@atacsolutions.com
Subject to change without prior notice. www.wilo.com 50 Hz EU 2013-07 8 / 29
Pump curves
0 2 4 6 8 10
0 0,5 1,0 1,5 2,0 2,5 3,0
0 1 2 3 4 5 6
0
2
4
6
8
10
0
20
40
60
80
100
0 2 4 6 8 100
100
200
300
m/s
Q/m³/h
max.
p/kPaWilo-Yonos MAXO25/0,5-12, 30/0,5-121~230 V - Rp 1, Rp 1¼
H/m
Δp-cP1/W
Q/m³/h
Q/l/s
Q/m³/h
v
max.
Δp-vP1/W
Rp 1
Rp 1¼0 1 2 3 4
6m7m8m9m10m11m 5m 4m
3m
2m
0,5m 1m
0 2 4 6 8 100
100
200
300max.
6m7m8m9m11m5m
4m
3m
10m
Dimension drawing
18
0
98
13
5
47 245
G 1½6464
90
Terminal diagram
L1 L3
L2 L3
L1 L2
PE SSM
3~230 V, 50/60 Hz
L N PE SSM
1~ 230 V, 50/60 Hz
SSM:
Collective fault signal(NC contact according to VDI 3814, load capacity 1 A,250 V ~)For function, see Wilo catalogue, chapter "Pumpmanagement Wilo control, planning guide"
Approved fluids (other fluids on request)
Heating water (in accordance with VDI2035)
•
Water-glycol mixtures (max. 1:1; above20% admixture, the pumping datamust be checked)
•
Permitted field of application
Temperature range at max. ambienttemperature +40 °C
-20...+110 °C
Maximum permissibleoperating pressure
Pmax 10 bar
Pipe connections
Threaded pipe union Rp 1
Thread G 1½
Overall length l0 180 mm
Motor/electronics
Energy efficiency index (EEI) ≤ 0.23
Electromagnetic compatibility EN 61800-3
Emitted interference EN 61000-6-3
Interference resistance EN 61000-6-2
Speed control Frequency converter
Protection class IP X4D
Insulation class F
Mains connection 1~230 V, 50/60 Hz
Nominal motor power P2 200 W
Speed n 1000 - 4800 rpm
Power consumption P1 10 - 305 W
Current consumption I 0.15 - 1.33 A
Motor protection integrated
Threaded cable connection PG M20x1.5
Materials
Pump housing Grey cast iron (EN-GJL-200)
Impeller Plastic (PPE - 30% GF)
Pump shaft Stainless steel (X46Cr13)
Bearing Carbon, metal impregnated
Minimum suction head at suction port for avoidingcavitation at water pumping temperature
Minimum suction head at 50 / 95 / 110°C
0.5 / 3 / 10 m
Data sheet: Wilo-Yonos MAXO 25/0,5-12
ATAC Solutions
01622 882400 / info@atacsolutions.com
Subject to change without prior notice. www.wilo.com 50 Hz EU 2013-07 9 / 29
Information for order placements
Make Wilo
Type Yonos MAXO 25/0,5-12
Art no. 2120641
Weight approx. m 5.30 kg
Data sheet: Wilo-Yonos MAXO 30/0,5-7
ATAC Solutions
01622 882400 / info@atacsolutions.com
Subject to change without prior notice. www.wilo.com 50 Hz EU 2013-07 10 / 29
Pump curves
0 1 2 3 4 5 6 7
0 0,4 0,8 1,2 1,6 2,0
0 1 2 3 4
0
1
2
3
4
5
6
7
0
10
20
30
40
50
60
70
0 1 2 3 4 5 6 70
50
100
150
max.
p/kPaWilo-Yonos MAXO25/0,5-7, 30/0,5-71~230 V - Rp 1, Rp 1¼
H/m
Δp-cP1/W
m/s
vRp 1
Rp 1¼
Q/l/s
Q/m³/h
Q/m³/h
0 0,5 1,0 1,5 2,0 2,5
Q/m³/h
Δp-vP1/W
6m7m 5m 4m 3m
2m
1m0,5m
max.
0 1 2 3 4 5 6 70
50
100
150max.
6m7m 5m 4m 3m
2m
Dimension drawing
18
0
90
11
3
44 180
G 25151
90
Terminal diagram
L1 L3
L2 L3
L1 L2
PE SSM
3~230 V, 50/60 Hz
L N PE SSM
1~ 230 V, 50/60 Hz
SSM:
Collective fault signal(NC contact according to VDI 3814, load capacity 1 A,250 V ~)For function, see Wilo catalogue, chapter "Pumpmanagement Wilo control, planning guide"
Approved fluids (other fluids on request)
Heating water (in accordance with VDI2035)
•
Water-glycol mixtures (max. 1:1; above20% admixture, the pumping datamust be checked)
•
Permitted field of application
Temperature range at max. ambienttemperature +40 °C
-20...+110 °C
Maximum permissibleoperating pressure
Pmax 10 bar
Pipe connections
Threaded pipe union Rp 1¼
Thread G 2
Overall length l0 180 mm
Motor/electronics
Energy efficiency index (EEI) ≤ 0.23
Electromagnetic compatibility EN 61800-3
Emitted interference EN 61000-6-3
Interference resistance EN 61000-6-2
Speed control Frequency converter
Protection class IP X4D
Insulation class F
Mains connection 1~230 V, 50/60 Hz
Nominal motor power P2 90 W
Speed n 1000 - 3700 rpm
Power consumption P1 5 - 120 W
Current consumption I 0.08 - 0.90 A
Motor protection integrated
Threaded cable connection PG M20x1.5
Materials
Pump housing Grey cast iron (EN-GJL-200)
Impeller Plastic (PPE - 30% GF)
Pump shaft Stainless steel (X46Cr13)
Bearing Carbon, metal impregnated
Minimum suction head at suction port for avoidingcavitation at water pumping temperature
Minimum suction head at 50 / 95 / 110°C
0.5 / 3 / 10 m
Data sheet: Wilo-Yonos MAXO 30/0,5-7
ATAC Solutions
01622 882400 / info@atacsolutions.com
Subject to change without prior notice. www.wilo.com 50 Hz EU 2013-07 11 / 29
Information for order placements
Make Wilo
Type Yonos MAXO 30/0,5-7
Art no. 2120642
Weight approx. m 4.60 kg
Data sheet: Wilo-Yonos MAXO 30/0,5-10
ATAC Solutions
01622 882400 / info@atacsolutions.com
Subject to change without prior notice. www.wilo.com 50 Hz EU 2013-07 12 / 29
Pump curves
0 2 4 6 8
0 0,5 1,0 1,5 2,0 2,5
0 1 2 3 4 5
0
2
4
6
8
10
0
20
40
60
80
100
0 2 4 6 80
50
100
150
max.
p/kPaWilo-Yonos MAXO25/0,5-10, 30/0,5-101~230 V - Rp 1, Rp 1¼
H/m
Δp-cP1/W
m/s
Q/m³/h
Q/l/s
Q/m³/h
v
max.
max.
6m7m8m9m10m 5m 4m
3m
2m
1m0,5m
Q/m³/h
Δp-vP1/W
0 2 4 6 80
50
100
150 6m7m8m9m10m
5m
3m
1,5m
4m
0 0,5 1,0 1,5 2,0 2,5 3,0 3,5
Rp 1
Rp 1¼
Dimension drawing
18
0
90
11
3
44 180
G 25151
90
Terminal diagram
L1 L3
L2 L3
L1 L2
PE SSM
3~230 V, 50/60 Hz
L N PE SSM
1~ 230 V, 50/60 Hz
SSM:
Collective fault signal(NC contact according to VDI 3814, load capacity 1 A,250 V ~)For function, see Wilo catalogue, chapter "Pumpmanagement Wilo control, planning guide"
Approved fluids (other fluids on request)
Heating water (in accordance with VDI2035)
•
Water-glycol mixtures (max. 1:1; above20% admixture, the pumping datamust be checked)
•
Permitted field of application
Temperature range at max. ambienttemperature +40 °C
-20...+110 °C
Maximum permissibleoperating pressure
Pmax 10 bar
Pipe connections
Threaded pipe union Rp 1¼
Thread G 2
Overall length l0 180 mm
Motor/electronics
Energy efficiency index (EEI) ≤ 0.23
Electromagnetic compatibility EN 61800-3
Emitted interference EN 61000-6-3
Interference resistance EN 61000-6-2
Speed control Frequency converter
Protection class IP X4D
Insulation class F
Mains connection 1~230 V, 50/60 Hz
Nominal motor power P2 140 W
Speed n 1000 - 4400 rpm
Power consumption P1 5 - 190 W
Current consumption I 0.08 - 1.30 A
Motor protection integrated
Threaded cable connection PG M20x1.5
Materials
Pump housing Grey cast iron (EN-GJL-200)
Impeller Plastic (PPE - 30% GF)
Pump shaft Stainless steel (X46Cr13)
Bearing Carbon, metal impregnated
Minimum suction head at suction port for avoidingcavitation at water pumping temperature
Minimum suction head at 50 / 95 / 110°C
0.5 / 3 / 10 m
Data sheet: Wilo-Yonos MAXO 30/0,5-10
ATAC Solutions
01622 882400 / info@atacsolutions.com
Subject to change without prior notice. www.wilo.com 50 Hz EU 2013-07 13 / 29
Information for order placements
Make Wilo
Type Yonos MAXO 30/0,5-10
Art no. 2120643
Weight approx. m 4.60 kg
Data sheet: Wilo-Yonos MAXO 30/0,5-12
ATAC Solutions
01622 882400 / info@atacsolutions.com
Subject to change without prior notice. www.wilo.com 50 Hz EU 2013-07 14 / 29
Pump curves
0 2 4 6 8 10
0 0,5 1,0 1,5 2,0 2,5 3,0
0 1 2 3 4 5 6
0
2
4
6
8
10
0
20
40
60
80
100
0 2 4 6 8 100
100
200
300
m/s
Q/m³/h
max.
p/kPaWilo-Yonos MAXO25/0,5-12, 30/0,5-121~230 V - Rp 1, Rp 1¼
H/m
Δp-cP1/W
Q/m³/h
Q/l/s
Q/m³/h
v
max.
Δp-vP1/W
Rp 1
Rp 1¼0 1 2 3 4
6m7m8m9m10m11m 5m 4m
3m
2m
0,5m 1m
0 2 4 6 8 100
100
200
300max.
6m7m8m9m11m5m
4m
3m
10m
Dimension drawing
18
0
98
13
5
47 245
G 26464
90
Terminal diagram
L1 L3
L2 L3
L1 L2
PE SSM
3~230 V, 50/60 Hz
L N PE SSM
1~ 230 V, 50/60 Hz
SSM:
Collective fault signal(NC contact according to VDI 3814, load capacity 1 A,250 V ~)For function, see Wilo catalogue, chapter "Pumpmanagement Wilo control, planning guide"
Approved fluids (other fluids on request)
Heating water (in accordance with VDI2035)
•
Water-glycol mixtures (max. 1:1; above20% admixture, the pumping datamust be checked)
•
Permitted field of application
Temperature range at max. ambienttemperature +40 °C
-20...+110 °C
Maximum permissibleoperating pressure
Pmax 10 bar
Pipe connections
Threaded pipe union Rp 1¼
Thread G 2
Overall length l0 180 mm
Motor/electronics
Energy efficiency index (EEI) ≤ 0.23
Electromagnetic compatibility EN 61800-3
Emitted interference EN 61000-6-3
Interference resistance EN 61000-6-2
Speed control Frequency converter
Protection class IP X4D
Insulation class F
Mains connection 1~230 V, 50/60 Hz
Nominal motor power P2 200 W
Speed n 1000 - 4800 rpm
Power consumption P1 10 - 305 W
Current consumption I 0.15 - 1.33 A
Motor protection integrated
Threaded cable connection PG M20x1.5
Materials
Pump housing Grey cast iron (EN-GJL-200)
Impeller Plastic (PPE - 30% GF)
Pump shaft Stainless steel (X46Cr13)
Bearing Carbon, metal impregnated
Minimum suction head at suction port for avoidingcavitation at water pumping temperature
Minimum suction head at 50 / 95 / 110°C
0.5 / 3 / 10 m
Data sheet: Wilo-Yonos MAXO 30/0,5-12
ATAC Solutions
01622 882400 / info@atacsolutions.com
Subject to change without prior notice. www.wilo.com 50 Hz EU 2013-07 15 / 29
Information for order placements
Make Wilo
Type Yonos MAXO 30/0,5-12
Art no. 2120644
Weight approx. m 5.40 kg
Data sheet: Wilo-Yonos MAXO 40/0,5-4
ATAC Solutions
01622 882400 / info@atacsolutions.com
Subject to change without prior notice. www.wilo.com 50 Hz EU 2013-07 16 / 29
Pump curves
0 2 4 6 8 10
0 0,5 1,0 1,5 2,0 2,5 3,0
0 0,4 0,8 1,2 1,6 2,0 2,4
0
1
2
3
4
5
0
10
20
30
40
50
v
0 2 4 6 8 100
40
80
120
max.
p/kPaWilo-Yonos MAXO40/0,5-41~230 V - DN 40
H/m
Δp-cP1/W
m/s
Q/l/s
Q/m³/h
Q/m³/h
Q/m³/h
Δp-vP1/W
4,5m5m 4m 3,5m2,5m
1,5m
3m 2m
1m
0,5m
max.
0 2 4 6 8 100
40
80
120max.
4,5m5m 4m3,5m 3m
2,5m 2m
Dimension drawing
220
90
113
57 175
5151
110
Dimension drawing, flangeØ 150
Ø 110
Ø 100
Ø 84
65
65
DN 40
4 x Ø14
4 x Ø19
Approved fluids (other fluids on request)
Heating water (in accordance with VDI2035)
•
Water-glycol mixtures (max. 1:1; above20% admixture, the pumping datamust be checked)
•
Permitted field of application
Temperature range at max. ambienttemperature +40 °C
-20...+110 °C
Maximum permissibleoperating pressure
Pmax 6/10 bar
Pipe connections
Flange Combination flange PN6/10(PN 16 flange according to EN1092-2)
Nominal flange diameter DN 40
Overall length l0 220 mm
Motor/electronics
Energy efficiency index (EEI) ≤ 0.23
Electromagnetic compatibility EN 61800-3
Emitted interference EN 61000-6-3
Interference resistance EN 61000-6-2
Speed control Frequency converter
Protection class IP X4D
Insulation class F
Mains connection 1~230 V, 50/60 Hz
Nominal motor power P2 90 W
Speed n 1200 - 3700 rpm
Power consumption P1 7 - 120 W
Current consumption I 0.09 - 0.90 A
Motor protection integrated
Threaded cable connection PG M20x1.5
Materials
Pump housing Grey cast iron (EN-GJL-250)
Impeller Plastic (PPS - 40% GF)
Pump shaft Stainless steel (X46Cr13)
Bearing Carbon, metal impregnated
Minimum suction head at suction port for avoidingcavitation at water pumping temperature
Data sheet: Wilo-Yonos MAXO 40/0,5-4
ATAC Solutions
01622 882400 / info@atacsolutions.com
Subject to change without prior notice. www.wilo.com 50 Hz EU 2013-07 17 / 29
Terminal diagram
L1 L3
L2 L3
L1 L2
PE SSM
3~230 V, 50/60 Hz
L N PE SSM
1~ 230 V, 50/60 Hz
SSM:
Collective fault signal(NC contact according to VDI 3814, load capacity 1 A,250 V ~)For function, see Wilo catalogue, chapter "Pumpmanagement Wilo control, planning guide"
Minimum suction head at 50 / 95 / 110°C
0.5 / 3 / 10 m
Information for order placements
Make Wilo
Type Yonos MAXO 40/0,5-4
Art no. 2120645
Weight approx. m 8.60 kg
Data sheet: Wilo-Yonos MAXO 40/0,5-8
ATAC Solutions
01622 882400 / info@atacsolutions.com
Subject to change without prior notice. www.wilo.com 50 Hz EU 2013-07 18 / 29
Pump curves
0 2 4 6 8 10 12
0 1 2 3 4
0 0,5 1,0 1,5 2,0 2,5 3,0
0
2
4
6
8
0
20
40
60
80
0 2 4 6 8 10 120 0,5m
100
14
14
200
300
0 0,4 0,8 1,2 1,6 2,0
DN40
DN50
max.
p/kPaWilo-Yonos MAXO40/0,5-8, 50/0,5-81~230 V - DN 40 / 50
H/m
Δp-cP1/W
Δp-vP1/W
m/s
v
Q/l/s
Q/m³/h
Q/m³/h
14 Q/m³/h
8m 7m 5m 3m6m 4m
2m
1m
max.
max.
0 2 4 6 8 10 120
100
200
300
7m8m 6m 5m 4m
3m
Dimension drawing
220
98
135
48 250
6464
110
Dimension drawing, flangeØ 150
Ø 110
Ø 100
Ø 84
65
65
DN 40
4 x Ø14
4 x Ø19
Approved fluids (other fluids on request)
Heating water (in accordance with VDI2035)
•
Water-glycol mixtures (max. 1:1; above20% admixture, the pumping datamust be checked)
•
Permitted field of application
Temperature range at max. ambienttemperature +40 °C
-20...+110 °C
Maximum permissibleoperating pressure
Pmax 6/10 bar
Pipe connections
Flange Combination flange PN6/10(PN 16 flange according to EN1092-2)
Nominal flange diameter DN 40
Overall length l0 220 mm
Motor/electronics
Energy efficiency index (EEI) ≤ 0.23
Electromagnetic compatibility EN 61800-3
Emitted interference EN 61000-6-3
Interference resistance EN 61000-6-2
Speed control Frequency converter
Protection class IP X4D
Insulation class F
Mains connection 1~230 V, 50/60 Hz
Nominal motor power P2 200 W
Speed n 1200 - 4800 rpm
Power consumption P1 10 - 305 W
Current consumption I 0.15 - 1.33 A
Motor protection integrated
Threaded cable connection PG M20x1.5
Materials
Pump housing Grey cast iron (EN-GJL-250)
Impeller Plastic (PPS - 40% GF)
Pump shaft Stainless steel (X46Cr13)
Bearing Carbon, metal impregnated
Minimum suction head at suction port for avoidingcavitation at water pumping temperature
Data sheet: Wilo-Yonos MAXO 40/0,5-8
ATAC Solutions
01622 882400 / info@atacsolutions.com
Subject to change without prior notice. www.wilo.com 50 Hz EU 2013-07 19 / 29
Terminal diagram
L1 L3
L2 L3
L1 L2
PE SSM
3~230 V, 50/60 Hz
L N PE SSM
1~ 230 V, 50/60 Hz
SSM:
Collective fault signal(NC contact according to VDI 3814, load capacity 1 A,250 V ~)For function, see Wilo catalogue, chapter "Pumpmanagement Wilo control, planning guide"
Minimum suction head at 50 / 95 / 110°C
0.5 / 3 / 10 m
Information for order placements
Make Wilo
Type Yonos MAXO 40/0,5-8
Art no. 2120646
Weight approx. m 9.20 kg
Data sheet: Wilo-Yonos MAXO 40/0,5-12
ATAC Solutions
01622 882400 / info@atacsolutions.com
Subject to change without prior notice. www.wilo.com 50 Hz EU 2013-07 20 / 29
Pump curves
0 4 8 12 16
0 1 2 3 4 5
0 1 2 3
0
2
4
6
8
10
12
0
20
40
60
80
100
120
0 4 8 12 160
100
200
300
4
0,5m
max.
Wilo-Yonos MAXO40/0,5-121~230 V - DN 40
Δp-vP1/W
p/kPaH/m
Δp-cP1/W
m/sv
Q/l/s
Q/m³/h
Q/m³/h
Q/m³/h
12m 11m 10m 9m 8m 7m 6m 5m
4m
3m
2m
1m
max.
max.
0 4 8 12 160
100
200
300
11m10m 9m 8m 7m 6m 5m
4m
12m
Dimension drawing
250
109
152
64 315
7171
125
Dimension drawing, flangeØ 150
Ø 110
Ø 100
Ø 84
65
65
DN 40
4 x Ø14
4 x Ø19
Approved fluids (other fluids on request)
Heating water (in accordance with VDI2035)
•
Water-glycol mixtures (max. 1:1; above20% admixture, the pumping datamust be checked)
•
Permitted field of application
Temperature range at max. ambienttemperature +40 °C
-20...+110 °C
Maximum permissibleoperating pressure
Pmax 6/10 bar
Pipe connections
Flange Combination flange PN6/10(PN 16 flange according to EN1092-2)
Nominal flange diameter DN 40
Overall length l0 250 mm
Motor/electronics
Energy efficiency index (EEI) ≤ 0.23
Electromagnetic compatibility EN 61800-3
Emitted interference EN 61000-6-3
Interference resistance EN 61000-6-2
Speed control Frequency converter
Protection class IP X4D
Insulation class F
Mains connection 1~230 V, 50/60 Hz
Nominal motor power P2 350 W
Speed n 950 - 4500 rpm
Power consumption P1 15 - 450 W
Current consumption I 0.17 - 2.00 A
Motor protection integrated
Threaded cable connection PG M20x1.5
Materials
Pump housing Grey cast iron (EN-GJL-250)
Impeller Plastic (PPS - 40% GF)
Pump shaft Stainless steel (X46Cr13)
Bearing Carbon, metal impregnated
Minimum suction head at suction port for avoidingcavitation at water pumping temperature
Data sheet: Wilo-Yonos MAXO 40/0,5-12
ATAC Solutions
01622 882400 / info@atacsolutions.com
Subject to change without prior notice. www.wilo.com 50 Hz EU 2013-07 21 / 29
Terminal diagram
L1 L3
L2 L3
L1 L2
PE SSM
3~230 V, 50/60 Hz
L N PE SSM
1~ 230 V, 50/60 Hz
SSM:
Collective fault signal(NC contact according to VDI 3814, load capacity 1 A,250 V ~)For function, see Wilo catalogue, chapter "Pumpmanagement Wilo control, planning guide"
Minimum suction head at 50 / 95 / 110°C
0.5 / 3 / 10 m
Information for order placements
Make Wilo
Type Yonos MAXO 40/0,5-12
Art no. 2120647
Weight approx. m 13 kg
Data sheet: Wilo-Yonos MAXO 50/0,5-8
ATAC Solutions
01622 882400 / info@atacsolutions.com
Subject to change without prior notice. www.wilo.com 50 Hz EU 2013-07 22 / 29
Pump curves
0 2 4 6 8 10 12
0 1 2 3 4
0 0,5 1,0 1,5 2,0 2,5 3,0
0
2
4
6
8
0
20
40
60
80
0 2 4 6 8 10 120 0,5m
100
14
14
200
300
0 0,4 0,8 1,2 1,6 2,0
DN40
DN50
max.
p/kPaWilo-Yonos MAXO40/0,5-8, 50/0,5-81~230 V - DN 40 / 50
H/m
Δp-cP1/W
Δp-vP1/W
m/s
v
Q/l/s
Q/m³/h
Q/m³/h
14 Q/m³/h
8m 7m 5m 3m6m 4m
2m
1m
max.
max.
0 2 4 6 8 10 120
100
200
300
7m8m 6m 5m 4m
3m
Dimension drawing
240
98
135
46 253
6464
120
Dimension drawing, flangeØ 165
Ø 125
Ø 110
Ø 99
70
70
DN 50
4 x Ø14
4 x Ø19
Approved fluids (other fluids on request)
Heating water (in accordance with VDI2035)
•
Water-glycol mixtures (max. 1:1; above20% admixture, the pumping datamust be checked)
•
Permitted field of application
Temperature range at max. ambienttemperature +40 °C
-20...+110 °C
Maximum permissibleoperating pressure
Pmax 6/10 bar
Pipe connections
Flange Combination flange PN6/10(PN 16 flange according to EN1092-2)
Nominal flange diameter DN 50
Overall length l0 240 mm
Motor/electronics
Energy efficiency index (EEI) ≤ 0.23
Electromagnetic compatibility EN 61800-3
Emitted interference EN 61000-6-3
Interference resistance EN 61000-6-2
Speed control Frequency converter
Protection class IP X4D
Insulation class F
Mains connection 1~230 V, 50/60 Hz
Nominal motor power P2 200 W
Speed n 1200 - 4800 rpm
Power consumption P1 10 - 305 W
Current consumption I 0.15 - 1.33 A
Motor protection integrated
Threaded cable connection PG M20x1.5
Materials
Pump housing Grey cast iron (EN-GJL-250)
Impeller Plastic (PPS - 40% GF)
Pump shaft Stainless steel (X46Cr13)
Bearing Carbon, metal impregnated
Minimum suction head at suction port for avoidingcavitation at water pumping temperature
Data sheet: Wilo-Yonos MAXO 50/0,5-8
ATAC Solutions
01622 882400 / info@atacsolutions.com
Subject to change without prior notice. www.wilo.com 50 Hz EU 2013-07 23 / 29
Terminal diagram
L1 L3
L2 L3
L1 L2
PE SSM
3~230 V, 50/60 Hz
L N PE SSM
1~ 230 V, 50/60 Hz
SSM:
Collective fault signal(NC contact according to VDI 3814, load capacity 1 A,250 V ~)For function, see Wilo catalogue, chapter "Pumpmanagement Wilo control, planning guide"
Minimum suction head at 50 / 95 / 110°C
0.5 / 3 / 10 m
Information for order placements
Make Wilo
Type Yonos MAXO 50/0,5-8
Art no. 2120649
Weight approx. m 10.50 kg
Data sheet: Wilo-Yonos MAXO 50/0,5-9
ATAC Solutions
01622 882400 / info@atacsolutions.com
Subject to change without prior notice. www.wilo.com 50 Hz EU 2013-07 24 / 29
Pump curves
0 5 10 15 20
0 1 2 3 4 5 6
0 0,5 1,0 1,5
v2,0 2,5 3,0
0
2
4
6
8
0
20
40
60
80
0 5 10 15 20
max.
Wilo-Yonos MAXO50/0,5-91~230 V - DN 50
Δp-vP1/W
p/kPaH/m
Δp-cP1/W
m/s
Q/l/s
Q/m³/h
Q/m³/h
Q/m³/h
max.
max.
9m 8m 7m 6m 5m 4m 3m
2m
1m0,5m
0 5 10 15 200
100
200
300
0
100
200
300
9m 8m 7m 6m 5m 4m
3m
Dimension drawing
280
109
152
53 318
7171
140
Dimension drawing, flangeØ 165
Ø 125
Ø 110
Ø 99
70
70
DN 50
4 x Ø14
4 x Ø19
Approved fluids (other fluids on request)
Heating water (in accordance with VDI2035)
•
Water-glycol mixtures (max. 1:1; above20% admixture, the pumping datamust be checked)
•
Permitted field of application
Temperature range at max. ambienttemperature +40 °C
-20...+110 °C
Maximum permissibleoperating pressure
Pmax 6/10 bar
Pipe connections
Flange Combination flange PN6/10(PN 16 flange according to EN1092-2)
Nominal flange diameter DN 50
Overall length l0 280 mm
Motor/electronics
Energy efficiency index (EEI) ≤ 0.23
Electromagnetic compatibility EN 61800-3
Emitted interference EN 61000-6-3
Interference resistance EN 61000-6-2
Speed control Frequency converter
Protection class IP X4D
Insulation class F
Mains connection 1~230 V, 50/60 Hz
Nominal motor power P2 350 W
Speed n 950 - 4000 rpm
Power consumption P1 15 - 430 W
Current consumption I 0.17 - 1.88 A
Motor protection integrated
Threaded cable connection PG M20x1.5
Materials
Pump housing Grey cast iron (EN-GJL-250)
Impeller Plastic (PPS - 40% GF)
Pump shaft Stainless steel (X46Cr13)
Bearing Carbon, metal impregnated
Minimum suction head at suction port for avoidingcavitation at water pumping temperature
Data sheet: Wilo-Yonos MAXO 50/0,5-9
ATAC Solutions
01622 882400 / info@atacsolutions.com
Subject to change without prior notice. www.wilo.com 50 Hz EU 2013-07 25 / 29
Terminal diagram
L1 L3
L2 L3
L1 L2
PE SSM
3~230 V, 50/60 Hz
L N PE SSM
1~ 230 V, 50/60 Hz
SSM:
Collective fault signal(NC contact according to VDI 3814, load capacity 1 A,250 V ~)For function, see Wilo catalogue, chapter "Pumpmanagement Wilo control, planning guide"
Minimum suction head at 50 / 95 / 110°C
0.5 / 3 / 10 m
Information for order placements
Make Wilo
Type Yonos MAXO 50/0,5-9
Art no. 2120650
Weight approx. m 14.20 kg
Data sheet: Wilo-Yonos MAXO 50/0,5-12
ATAC Solutions
01622 882400 / info@atacsolutions.com
Subject to change without prior notice. www.wilo.com 50 Hz EU 2013-07 26 / 29
Pump curves
0 5 10 15 20 25
0 2 4 6
0 1 2 3
0
2
4
6
8
10
0
20
40
60
80
4
100
0 5 10 15 20 250
200
400
v
11m 10m 9m 8m 7m 6m 5m 4m
3m
2m1m
max.
Wilo-Yonos MAXO50/0,5-121~230 V - DN 50
Δp-vP1/W
p/kPaH/m
Δp-cP1/W
m/s
Q/l/s
Q/m³/h
Q/m³/h
Q/m³/h
max.
max.
0 5 10 15 20 250
200
400
600
600
0,5m
11m 10m 9m 8m 7m 6m 5m
4m
Dimension drawing
280
109
152
53 318
7171
140
Dimension drawing, flangeØ 165
Ø 125
Ø 110
Ø 99
70
70
DN 50
4 x Ø14
4 x Ø19
Approved fluids (other fluids on request)
Heating water (in accordance with VDI2035)
•
Water-glycol mixtures (max. 1:1; above20% admixture, the pumping datamust be checked)
•
Permitted field of application
Temperature range at max. ambienttemperature +40 °C
-20...+110 °C
Maximum permissibleoperating pressure
Pmax 6/10 bar
Pipe connections
Flange Combination flange PN6/10(PN 16 flange according to EN1092-2)
Nominal flange diameter DN 50
Overall length l0 280 mm
Motor/electronics
Energy efficiency index (EEI) ≤ 0.23
Electromagnetic compatibility EN 61800-3
Emitted interference EN 61000-6-3
Interference resistance EN 61000-6-2
Speed control Frequency converter
Protection class IP X4D
Insulation class F
Mains connection 1~230 V, 50/60 Hz
Nominal motor power P2 500 W
Speed n 950 - 4400 rpm
Power consumption P1 15 - 600 W
Current consumption I 0.17 - 2.65 A
Motor protection integrated
Threaded cable connection PG M20x1.5
Materials
Pump housing Grey cast iron (EN-GJL-250)
Impeller Plastic (PPS - 40% GF)
Pump shaft Stainless steel (X46Cr13)
Bearing Carbon, metal impregnated
Minimum suction head at suction port for avoidingcavitation at water pumping temperature
Data sheet: Wilo-Yonos MAXO 50/0,5-12
ATAC Solutions
01622 882400 / info@atacsolutions.com
Subject to change without prior notice. www.wilo.com 50 Hz EU 2013-07 27 / 29
Terminal diagram
L1 L3
L2 L3
L1 L2
PE SSM
3~230 V, 50/60 Hz
L N PE SSM
1~ 230 V, 50/60 Hz
SSM:
Collective fault signal(NC contact according to VDI 3814, load capacity 1 A,250 V ~)For function, see Wilo catalogue, chapter "Pumpmanagement Wilo control, planning guide"
Minimum suction head at 50 / 95 / 110°C
0.5 / 3 / 10 m
Information for order placements
Make Wilo
Type Yonos MAXO 50/0,5-12
Art no. 2120651
Weight approx. m 14.20 kg
Data sheet: Wilo-Yonos MAXO 65/0,5-9
ATAC Solutions
01622 882400 / info@atacsolutions.com
Subject to change without prior notice. www.wilo.com 50 Hz EU 2013-07 28 / 29
Pump curves
0 5 10 15 20 25
0 2 4 6
0 0,5 1,0 1,5 2,0
0
2
4
6
8
0
20
40
60
80
0 5 10 15 20 250
200
400
600
v
max.
Wilo-Yonos MAXO65/0,5-91~230 V - DN 65
p/kPaH/m
Δp-cP1/W
0
200
400
600Δp-vP1/W
m/s
Q/l/s
Q/m³/h
Q/m³/h
Q/m³/h
max.
max.
8m9m 7m 6m 5m 4m
3m
2m
0 5 10 15 20 25
0,5m1m
9m 8m 7m 6m 5m 4m
3m
Dimension drawing
280
109
152
57 327
7171
140
Dimension drawing, flangeØ 185
Ø 145
Ø 130
Ø 118
80
80
DN 65
4 x Ø14
4 x Ø19
Approved fluids (other fluids on request)
Heating water (in accordance with VDI2035)
•
Water-glycol mixtures (max. 1:1; above20% admixture, the pumping datamust be checked)
•
Permitted field of application
Temperature range at max. ambienttemperature +40 °C
-20...+110 °C
Maximum permissibleoperating pressure
Pmax 6/10 bar
Pipe connections
Flange Combination flange PN6/10(PN 16 flange according to EN1092-2)
Nominal flange diameter DN 65
Overall length l0 280 mm
Motor/electronics
Energy efficiency index (EEI) ≤ 0.23
Electromagnetic compatibility EN 61800-3
Emitted interference EN 61000-6-3
Interference resistance EN 61000-6-2
Speed control Frequency converter
Protection class IP X4D
Insulation class F
Mains connection 1~230 V, 50/60 Hz
Nominal motor power P2 500 W
Speed n 950 - 4000 rpm
Power consumption P1 15 - 600 W
Current consumption I 0.17 - 2.65 A
Motor protection integrated
Threaded cable connection PG M20x1.5
Materials
Pump housing Grey cast iron (EN-GJL-250)
Impeller Plastic (PPS - 40% GF)
Pump shaft Stainless steel (X46Cr13)
Bearing Carbon, metal impregnated
Minimum suction head at suction port for avoidingcavitation at water pumping temperature
Data sheet: Wilo-Yonos MAXO 65/0,5-9
ATAC Solutions
01622 882400 / info@atacsolutions.com
Subject to change without prior notice. www.wilo.com 50 Hz EU 2013-07 29 / 29
Terminal diagram
L1 L3
L2 L3
L1 L2
PE SSM
3~230 V, 50/60 Hz
L N PE SSM
1~ 230 V, 50/60 Hz
SSM:
Collective fault signal(NC contact according to VDI 3814, load capacity 1 A,250 V ~)For function, see Wilo catalogue, chapter "Pumpmanagement Wilo control, planning guide"
Minimum suction head at 50 / 95 / 110°C
0.5 / 3 / 10 m
Information for order placements
Make Wilo
Type Yonos MAXO 65/0,5-9
Art no. 2120653
Weight approx. m 16.10 kg
top related