sige bicmos device modeling murty, sheridan,ahlgren, haramehicum users group meeting (bctm2002) 1...
Post on 26-Mar-2015
215 Views
Preview:
TRANSCRIPT
MURTY, SHERIDAN,AHLGREN, HARAME Hicum Users’ Group Meeting (BCTM2002)
1
SiGe BiCMOS Device Modeling
Evaluation of HiCUM for Modeling DC, S-parameter and Large-Signal Characteristics of SiGe HBTs
M.R.Murty, D.Sheridan, D.Ahlgren and D.HarameCommunications R&D Center
IBM MicroelectronicsEssex Junction, VT
MURTY, SHERIDAN,AHLGREN, HARAME Hicum Users’ Group Meeting (BCTM2002)
2
SiGe BiCMOS Device Modeling
•Transistor Structures used for Parameter Extraction:
(0.32, 0.48, 0.64, 0.96) m x 8.4 m with a CBEBC layout
•Scaling by TRADICA and Models extracted on structures with a CBE layout
•Simulations and Optimizations done in ADS2001 & ADS2002.
•Technology Details:High-Speed and High-Breakdown Versions with ~47GHz and 27 GHz fT and BVCEO of ~3.5V and 5.5V.
Model Extraction Methodology and Technology Details
MURTY, SHERIDAN,AHLGREN, HARAME Hicum Users’ Group Meeting (BCTM2002)
3
SiGe BiCMOS Device Modeling
Parameter Extraction
•Base Resistance Ring-Emitter Structures (several W’s and 2 L’s)•Emitter Resistance Modified Open-Collector Method •Collector Resistance Test Structures•Capacitances Cold S-Params + Large area monitors
•Avalanche Parameters: Ib vs Vbc Characteristics•Current Parameters Gummels and Output Curves
•Transit Time Parameters: Test Transistors (several W’s and one long L)
MURTY, SHERIDAN,AHLGREN, HARAME Hicum Users’ Group Meeting (BCTM2002)
4
SiGe BiCMOS Device ModelingIc
& I
b (
A)
Gummel Curves and Forward Gain -0.32 um x 16.8 um, HB device
MURTY, SHERIDAN,AHLGREN, HARAME Hicum Users’ Group Meeting (BCTM2002)
5
SiGe BiCMOS Device Modeling
Output Curves -0.32 um x 16.8 um, HB device
MURTY, SHERIDAN,AHLGREN, HARAME Hicum Users’ Group Meeting (BCTM2002)
6
SiGe BiCMOS Device Modeling
S-Parameter Results
• Bias Points: Vbe = 0.82 V, 0.90 V, 0.93 V and Vce = 2 V. (1 below ft peak, one at peak ft and one past ft peak)
• Frequency range: 2-40 GHz.
• Optimizations were done using Y-parameters (in ADS).
• Ft-Ic: Vcb = -0.3, 0, 1.0, 2.0, 3.0 V
MURTY, SHERIDAN,AHLGREN, HARAME Hicum Users’ Group Meeting (BCTM2002)
7
SiGe BiCMOS Device Modeling
Ph
ase(
S11
)
S11 -0.32 um x 16.8 um, HB device
o Vbe = 0.82 V, Vce= 2 V, o Vbe = 0.90 V, Vce= 2 V, o Vbe = 0.93 V, Vce= 2 V, __ Model
MURTY, SHERIDAN,AHLGREN, HARAME Hicum Users’ Group Meeting (BCTM2002)
8
SiGe BiCMOS Device Modeling
o Vbe = 0.82 V, Vce= 2 V, o Vbe = 0.90 V, Vce= 2 V, o Vbe = 0.93 V, Vce= 2 V, __ Model
S21 -0.32 um x 16.8 um, HB device
MURTY, SHERIDAN,AHLGREN, HARAME Hicum Users’ Group Meeting (BCTM2002)
9
SiGe BiCMOS Device Modeling
o Vbe = 0.82 V, Vce= 2 V, o Vbe = 0.90 V, Vce= 2 V, o Vbe = 0.93 V, Vce= 2 V, __ Model
S12 -0.32 um x 16.8 um, HB device
MURTY, SHERIDAN,AHLGREN, HARAME Hicum Users’ Group Meeting (BCTM2002)
10
SiGe BiCMOS Device Modeling
o Vbe = 0.82 V, Vce= 2 V, o Vbe = 0.90 V, Vce= 2 V, o Vbe = 0.93 V, Vce= 2 V, __ Model
S22 -0.32 um x 16.8 um, HB device
MURTY, SHERIDAN,AHLGREN, HARAME Hicum Users’ Group Meeting (BCTM2002)
11
SiGe BiCMOS Device Modeling
o Vbe = 0.82 V, Vce= 2 V, o Vbe = 0.90 V, Vce= 2 V, o Vbe = 0.93 V, Vce= 2 V, __ Model
|H21| and MAG/MSG -0.32 um x 16.8 um, HB device
MURTY, SHERIDAN,AHLGREN, HARAME Hicum Users’ Group Meeting (BCTM2002)
12
SiGe BiCMOS Device Modeling
o Measurement__ Model
(Vcb = -0.3, 0, 1, 2, 3 V)
|fT vs Ic -0.32 um x 16.8 um, HB device
MURTY, SHERIDAN,AHLGREN, HARAME Hicum Users’ Group Meeting (BCTM2002)
13
SiGe BiCMOS Device Modeling
Intermodulation Distortion Results
• Measurements done using ATN Load-pull system and Simulations Using Harmonic Balance
• 2-tone Simulations and Intermodulation Distortion with 50 termination, Sheridan, Murty and others CMC,April 2001 (PortoRico) & present work
• 1-tone Simulations and harmonic Distortion with a 50 termination Schroter et.al., IEEE TED, 47, pp1529-1535 (2000)
• 2-tone Intermodulation Distortion with matched load and source Murty et.al., (To be published)
MURTY, SHERIDAN,AHLGREN, HARAME Hicum Users’ Group Meeting (BCTM2002)
14
SiGe BiCMOS Device ModelingP
out,
IM
3, I
M5
(dB
m)
Ic &
Ib
(mA
)
o Vbe = 0.9109 V, Vce= 2 V,f= 900 MHz, =0.1 MHz
|Pout, IM3, IM5, Ic and Ib -0.32 um x 16.8 um, HB device
__ Hicum simulations using Harmonic Balance
__ Hicum
MURTY, SHERIDAN,AHLGREN, HARAME Hicum Users’ Group Meeting (BCTM2002)
15
SiGe BiCMOS Device Modeling
Conclusions
• Hicum Model is developed for a SiGe process and good fits demonstrated for DC, S-parameter and Large-signal characteristics.
• The simulations were done in ADS2001/02 and the model implementation is found to be robust. (at least at the device level)
MURTY, SHERIDAN,AHLGREN, HARAME Hicum Users’ Group Meeting (BCTM2002)
16
SiGe BiCMOS Device Modeling
ACKNOWLEDGEMENTS
Thanks to M.Schroter, K.Newton, W.Ansley for many useful discussions
top related