single beam editing hypack 2016 1
Post on 18-Jan-2018
262 Views
Preview:
DESCRIPTION
TRANSCRIPT
SINGLE BEAM EDITINGSINGLE BEAM EDITING
HYPACK 2016
Data FlowData Flow Reads:Reads:
• Raw Data FilesRaw Data Files• Old ALL Format Data Old ALL Format Data
FilesFiles• ALL2 Format Data FilesALL2 Format Data Files• HSX (Multibeam EC1 HSX (Multibeam EC1
records)records)
Applies (optionally):Applies (optionally):• Tide Correction FilesTide Correction Files• SV Correction FilesSV Correction Files
Saves:Saves:• ALL2 Format Data Files ALL2 Format Data Files
(Default)(Default)• Old All Format Data FilesOld All Format Data Files
SBMAX
Raw Data Raw Data FilesFiles
ALL2 ALL2 Format FilesFormat Files
*.TID*.TID
*.VEL*.VEL
Optionally:
Read a single file, selected files from a *.LOG, or the entire *.LOG file.
Sounding Selection Programs
Correcting for TidesCorrecting for Tides
Tide Corrections: Using a Tide Correction File:
Make a Tide Correction file (*.TID) in the MANUAL TIDES program.
Enter the name of your file RTK Tides:
No entry is needed. Set up RTK Tide parameters in
Advanced tab of Read Parameters window.
Manual tides entered during SURVEY:
No entry is needed. Specify ‘Manual Entry in
Survey’ as Tide Device in Selection tab of Read Parameters
Telemetry Tides: No entry is needed. Specify telemetry tide device
as Tide Device in Selection tab of Read Parameters.
Correcting for Sound VelocityCorrecting for Sound Velocity
Sound Velocity Corrections Calibrated sounder with a bar
check: No correction file is
needed. Using a velocity probe:
Create a Sound Velocity Correction file (*.VEL) in the SOUND VELOCITY program.
Enter the name of your correction file.
Using fixed corrections at different depths: Go to TOOLS – SOUND
VELOCITY ADJUSTMENT
Separate corrections can be computed for the high and low frequency depth values.• Use Depth 1 computes an SV correction for both frequencies, using just the high frequency.• Use Depth 2 computes an SV correction for both frequencies, using just the low frequency.• Use Both, computes separate SV corrections, using the depths of the high and low frequency.
Read Parameters: Read Parameters: Selections WindowSelections Window
Select the equipment to be edited.
Set ‘Tide’ to ‘Manual Entry in SURVEY’ To read Tide values that were manually entered during data collection.
‘Snap to Line’:Moves soundings so they
fall on the planned line. Pretty, but….. Dangerous
Read Parameters: Read Parameters: Offsets WindowOffsets Window
Changing offsets ONLY works when reading RAW data files!
• Change the Latency value.
• Change the Position Offsets of a sensor.
Read Parameters: Read Parameters: Survey Info WindowSurvey Info Window
Shows:• Time and Date of
the 1st data file.• Entries from
SURVEY’s Project Information window. Project Area Boat Surveyor
• Geodesy info from 1st data file.
Read Parameters: Read Parameters: Presort WindowPresort Window
Divides each survey line into ‘Blocks’.
Blocks can be created by:• Time (Seconds)• Distance (ft or m)• # of Depths
Loads one depth from each block into the spreadsheet.• Min, Max, 1st in Block,
Average To thin your data, it is
preferable to use one of the Sounding Selection routines AFTER you edit your data.
Select ‘Yes, Except Events’ to protect the location of your event marks.
Read Parameters: Read Parameters: GPS Pre-Filter WindowGPS Pre-Filter Window
Used to pre-filter positions and/or RTK Tides.
If Quality of GPS position is less than specified:• Position is not used
(top section)• RTK Tide is not
computed for point (bottom section)
• When positions are deleted from interior of line, new positions are interpolated and depths are not lost. • When positions are deleted from the ends of a line, depth data is lost.
Read Parameters: Read Parameters: Advanced WindowAdvanced Window
RTK Tides: Enable RTK Tides and Select a
Method Average Tide (preferred) Averaging period = 5 wave periods
(in secs.) Recalculate allows you to fix
problems due to bad configurations.
MRU Apply Heave:
That’s why you bought it. Apply Pitch and Roll Corrections:
Re-computes position of transducer using pitch and roll data.
Remove Heave Drift: Tries to re-center the heave about
the ‘0’. POSPac Adjustments & Post-
Processed GPS Corrections Allows you to adjust positions with
post-processed *.OUT and comma-separated-value files.
RTK Tides: RTK Tides: Tide and Draft WindowTide and Draft Window
Read Parameters Window• Set parameters in the Advanced Tab of the Read Parameters
Tide and Draft Window• Raw RTK Tides values:
• Color-coded by GPS Status• Averaged RTK Tides
• (RED line on graph)• Eliminate RTK Tide Spikes due to short-term lost of Fixed RTK in
the Tides window.
Correction of Heave DriftCorrection of Heave Drift
Heave values can drift ‘off-center’ due to rapid accelerations or changes of direction.
Heave Drift NOT Removed
Heave Drift Removed
Read Parameters: Read Parameters: Advanced Window: Steer Sounding BeamAdvanced Window: Steer Sounding Beam
DD’
X,YX’,Y’
The position of the sounding is based upon the center of your transducer beam.
‘Steer Sounding Beam’ computes a new location for the center of your transducer beam, based on the pitch and roll values, and the beam width of your transducer.
D’ = cos(pitch)*cos(roll)*D.
POSPac AdjustmentsPOSPac Adjustments
Allows the user to apply enhanced Post-Processed positions, heave, pitch, roll and Tide data from a POSPac (POS/MV) file.
AVIAVI
Post-Processed GPS CorrectionPost-Processed GPS Correction
Allows the user to apply enhanced Post-Processed positions and RTK tide data from an ASCII file.
SBMAX LayoutSBMAX Layout
SBMAX Control WindowSBMAX Control Window
SBMAX SpreadsheetSBMAX Spreadsheet SBMAX Survey WindowSBMAX Survey Window
SBMAX Profile WindowSBMAX Profile Window
Other Useful WindowsOther Useful Windows
Echogram Window: Used to display the acoustic data for each ping from network-capable echosounders. You’ll need a network echosounder!
Heave Window: Displays raw heave values. Examine each line for heave drift!
Tide and Draft Window: Shows tide corrections. Very useful for RTK tides! Allows you to cut out short periods where you have lost RTK fixed.
Editing Track Lines: Editing Track Lines: SURVEY WindowSURVEY Window
SURVEY Window
You can delete ‘individual’ bad position points OR
‘Interpolate across’ user-defined blocks Edit your all of your track lines, then review the profiles one-by-one. Deleting interior positions results in no loss of depth data, as new positions are interpolated across the deleted track. Deleting exterior positions results in the loss of depth data.
AVI
Deleted Positions
No loss of depth data
Deleted Positions
Loss of depth data at end of line
Background Files in Survey WindowBackground Files in Survey Window
Users can display all background files in the Survey Windows of SBMAX and MBMAX. Hit ‘F9’ to get to the View Options window and enable ‘Show Charts’.
Editing Track Lines: Editing Track Lines: in the Profile Window in the Profile Window
You can also interpolate across position spikes by setting flags in the profile window.
Profile Window: Profile Window: ‘Depth vs. DBL’ or ‘Depth vs. Time’‘Depth vs. DBL’ or ‘Depth vs. Time’
Surveying across a Channel:• Use ‘Depth vs. DBL’
Surveying around Curves or Doubling back against your course:• Use ‘Depth vs. Time’
Hit ‘F9’ to get quick access to the display settings
Profile Window: Profile Window: Lines vs. PointsLines vs. Points
Profile Window: Profile Window: Deleting Above/Below LinesDeleting Above/Below Lines
Echogram Window:Echogram Window:For Echosounders that Provide Digital Acoustic Data
View acoustic data from:
• Odom MK3• Odom CV3• Simrad EA400• Knudsen
• Manually digitize acoustic echogram.• Display
• High Frequency• Low Frequency
Requires a network connection. Check “Record Device Specific Messages” in HARDWARE to log the acoustic data to a separate *.BIN file.
FiltersFilters
o Hit ‘CTRL-F’ to get to the Filter Set-Up Window.
o Minimum Deptho Maximum Deptho Offline Limito Spike Limito Pitch Roll Limito Keep Events Only
AVI
Restoring Deleted PointsRestoring Deleted Points
Deleted points are maintained.In Memory in SBMAXIn the Edited ALL2 format data files.
You can restore deleted points in the Profile Window.
Spreadsheet Window: Spreadsheet Window: Export to TXT FileExport to TXT File
Configure your spreadsheet before export.User Defined OutputDelimiters:
• Space• Comma
Options:• One TXT File
for every data file.
• One TXT File for all data files.
• Useful for quickly generating XYZ files
Tools MenuTools Menu
•Tide Adjustment•Centerline Method: Used to interpolate tide correction values along a river using multiple gauges.•3 Point Method: Used to interpolate tide corrections using 3 separate gauges.•Tide Offset: Used to add a fixed offset to Tide Correction values.
• Heave Adjustment• POS/MV True Heave File:
Reads ‘True’ heave from files logged by Applanix POS/MV.
• User can enter multiple files.• F180 iHeave File: Reads
‘iHeave’ files logged by Coda Octopus F180.
• User can enter multiple files.
AVI
Tools Menu: Tools Menu: Draft AdjustmentDraft Adjustment
Dynamic Draft Adjustment• Generates new dynamic draft corrections based on the speed of the vessel and the user-defined correction table.• Can create a single table or a shallow vs. deep water table.• The same routine as the DRAFTTABLE.DLL, now available in post-processing.
Tools Menu: Tools Menu: Sound Velocity AdjustmentSound Velocity Adjustment
• Sound Velocity AdjustmentSound Velocity Adjustment• Inserts sound velocity corrections Inserts sound velocity corrections based on the measured depth and based on the measured depth and the correction values from a table.the correction values from a table.
Most users will perform a bar check to calibrate their single beam echosounder. The static draft and the sound velocity corrections are then built into the soundings being sent to the data collection computer.
• Save: Saves the Currently Displayed File with its Prefix.
•Save As: Saves the Currently Displayed File with Prefix of your Choice.
• Save All: Saves All the data files that are loaded, with same Prefix.
• Save to XYZ: Saves all data to an XYZ file.
• Save Options: User Defined Save Options are set.
Save OptionsSave Options
Save OptionsSave Options
Files are saved to project’s Edit folder.
Original data files are not modified in any way.
File Extension Options:• *.EDT (Default)• User Defined
• (Useful for separating Pre VS. Post Survey data)
• Can now have unlimited length extensions.
File Formats:• Edited ALL2 Format (Default)• Old Edited ALL
Format (not recommended)
Survey NotesSurvey NotesFile Pulldown MenuFile Pulldown Menu
• Show Read Parameters…•Re-Display Read Parameters Window, to double check how the settings were applied to the raw data when it was loaded
• NOTE: These Parameters CANNOT be changed once the files have been loaded into the Editor
• Show Survey Notes…• Display any Notes that were entered in HYPACK SURVEY’s Comment Window when the Raw Data file was being collected in SURVEY
• Use when the editors don’t participate in the survey.
Statistics, Integration, and Corrections:Statistics, Integration, and Corrections:File MenuFile Menu
Overlay: Overlay additional sounding files from the same survey line.
Templates: Display up to four (4) Channel Templates in Profile Window.
Offline Statistics: Display Offline Histogram of the Survey Data.
Information: Statistical Information about the Survey Data.
Merge Depths: Ability to Merge Digitized data with Raw Data.
Sounding Migration: Re-compute the XY position of a Depth, based upon the Transducer Cone Angle and the Slope of the bottom.
De-Selection and TargetsDe-Selection and TargetsFile MenuFile Menu
• Ignore Current Line (F7)
Removes the Current Selected file from the File List
• Save Point as Target (F5)
Saves the Current Cursor Location to a Target in a User defined Target file. Description can also be User defined
Overlaying Previous Data FilesOverlaying Previous Data Files
Datafiles from other surveys can be displayed in the profile window.The data must have been collected on the same planned lines.
AVI
Sounding MigrationSounding MigrationFor Reservoirs and Steep SlopesFor Reservoirs and Steep Slopes
A = Transducer PositionA = Transducer Position BB = Point of 1= Point of 1st st EnsonificationEnsonification
Without Migration:Without Migration: Depth Depth DD = AB is assigned at Point = AB is assigned at Point
PP With Migration:With Migration:
Depth Depth D’D’ is computed based on: is computed based on: Depth Depth DD Beam WidthBeam Width Bottom SlopeBottom Slope
Depth Depth D’D’ is then assigned at Point is then assigned at Point P’P’..
D
P’ P
A
B
D’
JPGS
Edit MenuEdit Menu
• Delete Point: Removes a single point.• Insert Point: Used to insert point(s) before or
after the current cursor position.• Merge Corrections: Adjusts the Raw Sounding
by adding all of the individual corrections to it. Then ‘zeroes out’ all corrections.
• Fill Survey: Allows you to set a constant value for dynamic draft, tide, sound velocity, etc.
• Depth 1-2 Difference: Takes the difference between Depth 1 (High Freq.) and Depth 2 (Low Freq.) and stores it in the Raw Depth 1 value.
• Depth 2-1 Difference: • Absolute Value Depth 1: Modifies the Raw
Depth 1 values by taking the absolute value.• Absolute Value Depth 2: Modifies the Raw
Depth 2 values by taking the absolute values.
Full Editing SessionFull Editing Session
top related