sinotruk c7h 8x4 logging truck
Post on 07-Jun-2022
68 Views
Preview:
TRANSCRIPT
EXTERNAL DIMENSIONS
Length (mm) 10225
Width (mm) 2496
Height (mm) (empty) 3560
Wheel base (mm) 5850
Track (mm)Front 2041
Rear 1816
Min. ground clearance (mm)
257
Approach angle (o) 22
Departure angle (o) 14
0800 SINO NZ | www.sinotruknz.com | 92 The Blvd, Te Rapa Park, Hamilton
C7H 8X4 LOGGING TRUCK
FEATURES
The new Sinotruk C7H off ers you fl exibility with a high torque 540HP engine, drivelines and wheelbases in chassis confi gurations to meet your transportation requirements.
Leading safety features include a built in crumple zone, ABS and EBS
H Permit capable
Vulcan V340 Scales Fitted
Exte E13 Series bolsters
Diff erential locks and cross locks for when the going gets tough
Voith Retarder
C7H 8X4 LOGGING TRUCK
0800 SINO NZ | www.sinotruknz.com | 92 The Blvd, Te Rapa Park, Hamilton
WEIGHTS
Cross weight of chassis (kg) 9800
Weight allocation of chassis (kg)
Front axle 2790/2890
Rear axle 2060/2060
GVM (kg) 31000
Max load of two axles (kg) Front 6500/6500
Rear 18000
GCM (kg) 58000
CAPABILITY
Max speed(km/h) 110
Min turning diameter (m) 22.4
Max climb gradient (%) 35
Fuel tank (L) 400
CABIN
Model P
Sits 2
Turing radius (mm) 2800
CLUTCH
Model CH430-25
Operation Mode Hydraulic with air
ENGINE
Model MC13.54-50
Displacement 12.419
Power rating kW/(r/min) 379/1900
Max torque Nm/(r/min) 2500/1050-1350
TRANSMISSION
Model ZF16S2531TO
Forward gear ratio 13.805, 11.54, 9.487, 7.93, 6.53, 5.458, 4.565, 3.816, 3.021, 2.528, 2.078, 1.737, 1.43, 1.196, 1.0, 0.836
Reverse gear ratio 12.923, 10.802
FRAME
Model Trapezium frame
Main beam cross-section (mm) 270x85x8
Width of frame Assembly (mm)
Front 940
Rear 762
STEERING GEAR
Model Ball circular
Ratio 22.2-26.2
Max pressure of pump (kPa) 18300
Steering way Steering wheel
BRAKING SYSTEM
Working pressure (kPa) 1000
Drive braking type Dual circuit
Brake power adjust type ABS/EBL/ASR
Parking brake type Spring
Assistant brake type EVB
ELECTRICS
Circuit type double controlpositive pole
Voltage (V) 24
Generator power (kW) 2.0
Accumulator voltage / capacity(V/Ah) 2X12/165
EXTRAS
Trailer brakes ABS to rear Included
Sunvisor, side skirts Included
SUSPENSION
Front Model Spring
Number 3 leaf parabolic
Rear Model Non-independent
Number 8 air bags
DRIVING AXLE
Model MCY13 disc
Main drive ratio Ratio 4.11
Optional 3.36, 4.11, 2.85
Differential lock Diff lock + cross lock
FRONT
Model HF7(disc) 22”
C7H 8X4 LOGGING TRUCK
0800 SINO NZ | www.sinotruknz.com | 92 The Blvd, Te Rapa Park, Hamilton
LOGGING TRUCK SPECIFICATIONS
Cabguard Evans galvanized 2600mm steel cab guard complete with chain tray fitted to the truck chassis. Shovel and broom holder and two (2) brackets for loading lights fitted
Bolsters 2 of Exte E12 series bolsters c/w 2600mm fixed height arms fitted to Evans certified layover mounts (Torsion spring type)
Scales 4 of Vulcan 15” loadcells fitted to the bolster mounts c/w a 4 lead Vulcan VSL Vulcoder and Vulcan V340 scale meter
Drawbeam Drawbeam and bumper assembly c/w a 50mm trailer coupling - Ringfeeder 2 of brackets for reverse lights fitted
Load anchorage 6mm throw over chain and LT tensioner fitted to each bolster, with an extra chain hook 1 of 6mm belly chain fitted with anchor points (Twitches) 2 of trailer tie down points fitted. All anchor points are certified
Mudguards Rhino plastic single guards fitted over the 2nd steer axle Rhino plastic full dual guards fitted over the drive axle group
Mudflaps 2 of Evans / Vulcan mud flaps mounted off the rear bumper 2 of plain white mud flaps mounted to the rear side of the 2nd and 4th axle mudguards
Step Access step fitted where practical
Tankguard High tensile steel tank guard supplied and fitted over the diesel tank
Trailer connections Triomatic air coupling, 7 pin electrical plug and Vulcan scale plug fitted
Lighting & wiring Hella LED
Trailer Carriers To suit 5A trailer
Chassis cover Aluminium chassis covers fitted from the cab guard to the draw beam Fitted with dog bones
LOGGING TRAILER SPECIFICATIONS
Chassis Evans I-Beam chassis fabricated from high tensile steel
Suspension Hendrickson AANT230T air suspension (integrated axle)
Axles 5 of Hendrickson INTRAXX 19.5” 8 stud axles (drum brake)
Wheels 20 of Weight Cheetah 19.5” 8 stud alloy wheels
Tyres 20 of Boto 265/70R 19.5” tyres
Scales 2 of Vulcan Air Transducer c/w single lead Vulcan VSL Vulcoder and Orange cable assembly plumbed into the air suspension system
Bolsters 4 of Exte spring loaded bolsters fitted on certified mounts
Load anchorage Throw over chain (6mm) and LT tensioners fitted to each bolster, with an extra chain hook 2 of belly chains supplied with 3 anchor points fitted (with Twitches) All anchor points are certified
Drawbar Evans certified A-Frame type with 50mm weld in tow eye and drawbar catch, Dual springs fitted
Turntable 20 tonne double row ball race fitted
Brakes EBS Brakes with WABCO and Sealco valves
Trailer Connections Triomatic coupling, 7 pin electrical plug, EBS plug and Vulcan Scale plug fitted
Mudflaps 2 x Evans / Vulcan mud flaps off the bumper
Lights & Wiring Hella LED
Lifting chain 13/16mm high tensile lifting chain fitted with four anchor points Lifting ring fitted at the balance point of the trailer
Chassis Cover Aluminium chassis covers fitted to the front and rear of the chassis
C7H 8X4 LOGGING TRAILER
0800 SINO NZ | www.sinotruknz.com | 92 The Blvd, Te Rapa Park, Hamilton
top related