skid steer brush cutters€¦ · — 1 — skid steer brush cutters owner / operator instruction...
Post on 26-Jul-2020
3 Views
Preview:
TRANSCRIPT
— 1 — www.brushwolf.com
Skid Steer Brush Cutters
Owner / Operator Instruction & Maintenance
Manual
Model Series:
4200, 4800, 6000, 6600, 7200,7201, 7800, 9000
— 2 —
Before operation of your Brush Wolf attachment read the entire contents of this manual
Thank you for your purchase of the Brush Wolf rotary brush cutter. At Cross-Tech Manufacturing we take great pride in the design and manufacturing of our prod-ucts and we appreciate your business. We are confident your Brush Wolf will pro-vide many years of reliable service. Welcome to the Brush Wolf family of attach-ments.
For your safety and the safety of others, please read the entire contents of this man-ual prior to the operation of the Brush Wolf Brush Cutter.
If you have questions regarding your Brush Wolf, contact your dealer.
Please take the time to fill out the Warranty Registration Form contained in this manual or go on-line at Brushwolf.com. A Warranty Registration Form (page 43) must be on file within thirty days of the purchase date in order for warranty claims to be valid. A full description of the warranty and process for submittal can be found on page 44.
To ensure prompt and accurate information when working with your dealer re-garding your Brush Wolf Brush Cutter please complete the Owner Reference Infor-mation below. The information will be vital for service, repair and warranty inqui-ries.
OWNER REFERENCE INFORMATION
Date Purchased:
Dealer Name:
Dealer Phone:
Model Number:
Serial Number:
Thank you for your business!
— 3 — www.brushwolf.com
THIS PAGE IS INTENTIONALLY
BLANK
— 4 —
Table of Contents
Foreword...............................................................................................2
Safety Section.......................................................................................6
Operation Instructions......................................................................8
Maintenance........................................................................................9
Maintenance Checklist...................................................................10
Troubleshooting...............................................................................11
4200 Parts Diagram........................................................................124200 Parts List...................................................................................13
4800 Low Flow & Standard Parts Diagram.............................144800 Low Flow & Standard Parts List.. ....................................15
6000 Low Flow & Standard Parts Diagram............................166000 Low Flow & Standard Parts List.......................................17
6600 Low Flow & Standard Parts Diagram............................186600 Low Flow & Standard Parts List.......................................19
6600 HF Parts Diagram.................................................................206600 HF Parts List............................................................................21
7200 Low Flow & Standard Parts Diagram.............................227200 Low Flow & Standard Parts List.......................................23
7200 HF Parts Diagram.................................................................247200 HF Parts List............................................................................25
7201 Low Flow & Standard Parts Diagram.............................267201 Low Flow & Standard Parts List.......................................27
7201 High Flow..............................................................................287201 High Parts List......................................................................29
— 5 — www.brushwolf.com
7800 Standard Parts Diagram....................................................307800 Parts List..................................................................................31
7800 HF High Flow Parts Diagram...........................................327800 HF High Flow Parts List......................................................33
9000 Standard Parts Diagram....................................................349000 Standard Parts List...............................................................35
9000 HF High Flow Parts Diagram...........................................369000 HF High Flow Standard Parts List.........................37 & 38
Blades, Blade Carriers Parts List..................................................40
Dealer Checklist...............................................................................42
Warranty Registration...................................................................43
Warranty Information...................................................................44
Table of Contents - continued
— 6 —
The following safety instructions are provided to alert you to precautions which, if not followed, may cause serious injury to yourself or others. Please read these instructions com-pletely. Cross-Tech Manufacturing can not cover every incident that might be a hazard. Extreme caution should be used at all times. Only use Brush Wolf Brush Cutters for the pur-pose for which it has been designed. Always operate a skid steer with a forestry rated door and cab. Safety goggles and hearing protection must be worn at all times.
Site Inspection: Before operation of your Brush Wolf, carefully inspect the area to be cleared. Remove any items which may be picked up and thrown by the cutting blades; wire, pipes, or rocks. Mark any object too large to move. This is an important step to help avoid damage to property, the Brush Wolf brush cutter, your skid steer or personal injury. If an object is struck when operating the Brush Wolf, immediately shut down power to both the attachment and the skid steer. Any damage should be corrected and tested before continu-ation of cutting.
Equipment Inspection: Prior to inspection, disconnect the unit from the skid steer. To inspect or to make repairs under the Brush Wolf cutter deck always block the unit securely in order to prevent accidental release of the lift mechanism. Inspect all hydraulic hoses and shields to ensure they are in good condition and without holes before pressurizing. Hydrau-lic fluid can escape under pressure and may cause serious injury or death. Wear safety gog-gles, ear protection, hard hat, and only operate the skid steer behind shatter proof forestry rated door and cab.
Skid Steer Auxiliary Hydraulic Flow: Check the specifications of the Brush Wolf models rated GPM to correctly match the hydraulic flow of your skid steer to ensure proper opera-tion.
Do Not operate near bystanders, vehicles, pets, livestock or buildings. Objects may dis-charge while cutting with the Brush Wolf and has the potential to cause serious injury.
Do Not place hands, feet or other objects under the deck while the Brush Wolf is in oper-ation. To inspect or perform maintenance under the deck, always shut down the power to the Brush Wolf, shut-off the skid steer engine, disconnect hydraulic hoses, and block the unit securely.
Do Not raise the mower deck when blades are rotating. Operation with the mower raised will expose the cutting blades and the potential for injury or death.
Do Not allow children to operate a rotary brush cutter. Only individuals with skid steer experience who are well acquainted with the rules of safe operation should be allowed to operate the Brush Wolf.
Safety Instructions
— 7 — www.brushwolf.com
Safety Instructions
Do Not operate the Brush Wolf in conditions with poor visibility.
Do Not expose the underside of the blades towards the cab.
Do Not operate while intoxicated or if taking medications that may impair your senses or reac-tions.
Do Not attempt to straighten blades. Order replacement blades if blades are bent, cracked or damaged.
Do Not leave the Brush Wolf unattended while in a raised position. Always make sure both the runners are placed firmly on the ground and shut down the skid steer.
Do Not continue operation if an unexpected object is struck. IMMEDIATELY shut down pow-er to both the attachment and the skid steer. Disconnect the hydraulic couplers from the power source. Evaluate the damage, repair and the test unit before operation.
Do Not allow anyone or any item on top of the mower deck when in operation. Do Not operate until all of the members of your work crew are alerted to the dangers of walking up to the brush cutter while in operation.
Make sure all hydraulic connections are tight and hoses and shields are in good condition before applying pressure. Hydraulic fluid escaping under pressure can penetrate skin and cause serious injury. If this type of injury occurs, seek medical attention immediately.
— 8 —
Operation Instructions
1. Prior to operation check the blades and replace if cracked or damaged. All blades must be replaced at the same time. Tighten the blade carrier to the gearbox, blade bolts/nuts, and hydraulic motor mount nuts to torque specification on Page 10. Check the hydraulic fluid. A low level could indicate a leak and require a closer inspection of your unit.
2. Connect the Brush Wolf to your skid steer with the universal quick-tach mount.
3. Once connected, visually check the lock pins to make sure the Brush Wolf is securely locked in place. Raise the Brush Wolf to 12” above ground level. Loop the lift limit chain through the chain ring on your skid steer and back to the chain bracket on your Brush Wolf. Verify the hydraulic flow of your skid steer is within the range of the Brush Wolf rating of GPM - Gallons per Minute.
4. Inspect the hydraulic couplers and wipe off water, dust or any debris. Dirt and debris can damage hydraulic components. Once cleaned, connect the couplers from the cutter to the auxiliary hydraulic system on the skid steer.
5. Connect the auxiliary hydraulic lines for the brush cutter to the skid steer. If you have a High Flow skid steer and brush cutter - attach the case drain to the skid steer. Twist the collars of the quick connect couplers to secure the hydraulic connections. Do not operate the brush cutter on High Flow hydraulics (over 30 GPM) unless the brush cutter is equipped with a High Flow motor this may cause damage to the motor and void the warranty.
6. Confirm all safety measures have been completed per the Safety Instructions. Most impor-tantly make sure the area is clear of personnel and pets.
7. Enter shatter-proof cab door, engage seat belt, release brake and start engine. The runners of the Brush Wolf should be as close to the ground as possible. Never raise the Brush Wolf more than seven (7) inches off the ground while in operation.
8. Slowly apply hydraulics to the Brush Wolf and increase the engine speed to high idle. Make sure the unit is operating smoothly before moving the skid steer forward. When tempatures are below zero allow additional time for hydraulic fluids to warm-up.
9. Maintain a speed to handle the volume of brush and to prevent stalling.
10. Stay alert for drop-offs, rocks, holes, abandoned wells and septic tanks. Do not operate or drive across a steep embankment as this may cause a rollover and possible injuries or death.
11. To cut large diameter brush and trees, move forward slowly to make the cut.
12. When finished cutting, lower lift arms, make sure the cutter is placed flat on the ground, throttle down the skid steer and shut off the hydraulic flow to the unit, stop engine, and engage parking brake prior to leaving the cab. Noise at shut down is normal.
13. To disconnect hoses use proper hand protection as the couplers may be hot.
— 9 — www.brushwolf.com
Maintenance
Your new Brush Wolf is a precisely engineered attachment and requires little maintenance. The Brush Wolf is built to strict standards and will deliver years of dependable service by following these maintenance guidelines:
Perform maintenance on level surface with the unit firmly on the ground and blocked. Shut off the hydraulic power supply and disconnect hydraulic couplers. Before operation, check the gearbox for proper lubricant and hydraulic hoses for any leaks. To check lubricant level, remove pipe plug from the side of the gearbox. Lubricant should be the same level as the plug. See diagram on page 10. IMPORTANT: Do not overfill, as too much lubricant may rupture the gearbox seals.
1. Check all nuts and bolts for proper tightness. See Maintenance Schedule on page 10.
2. Every Brush Wolf is tested at the factory and all nuts and bolts have been tight-ened to specifications. We recommend you check them after the first 4 to 6 hours of operation and at regular intervals as defined in the Maintenance Schedule.
3. Tighten all the nuts which secure the blades to the blade carrier every eight (8)hours. Torque the nuts to 775 ft - lbs with a 1-11/16” socket wrench. The nuts are located under the access plate on the top of the blade carrier. Also, tighten the castle nut holding the blade or bar carrier to the output shaft of the gearbox, torque to 450 ft - lbs with a 1-1/2” socket wrench.
4. Inspect blades regularly to ensure they are sharp, tightened correctly and intact. Blades must be replaced as a set and never try to weld or straighten damaged blades, as loss of blade integrity will result.
5. Inspect hydraulic hoses daily or each use for damage, wear or leaks.
6. Shear bolt protection (also known as butter bolt) at the motor coupler. It is recommended to carry additional shear bolts GRD 2 obtained at most hardware stores. Only use grade 2 when replacing.
CAUTION: Always replace the entire set of blades. Never weld or straighten damaged blades, as loss of blade integrity may result. CAUTION: Replace missing or illegible safety decals immediately. Decals are available at your Brush Wolf dealer.
— 10 —
Maintenance Schedule / Checklist
ITEM TYPE OF MAINTENANCE FREQUENCYGearbox mounting bolts Model: 4200 - Torque to 160 ft - lbs
All other models: Torque to 275 ft - lbsDaily or every 8 hours
Hydraulic motor mount bolts Torque to 75 ft - lbs. Daily or every 8 hours
Block - High Flow units only Torque to 420 in - lbs. Daily or every 8 hours
Shear Bolt Grade 2 Torque to 75 ft - lbs. Daily or every 8 hours
Blade Bolt/Nuts Torque to 775 ft - lbs. Daily or every 8 hours
Blade Inspection Check for damage, dullness or cracks. Blades should rotate freely and be clear of obstructions. Replace entire set of blades if damaged.
Daily or every use
Gearbox castle nut Torque to 450 ft - lbs. Daily or every 8 hours
Hoses and hose safety shield Check for wear, damage or leaks. Replace if dam-aged.
Daily or every 8 hours
Gearbox lubricant Check oil - add 85 W 140 gear lube DO NOT overfill - see diagram below
Once per week
Gearbox shaft Inspect shaft and remove foreign material. Inspect each use
Brush Wolf machine Clean the unit to view potential damage or ob-structions that could result in poor performance.
As needed
CAUTION: Perform maintenance on a level surface with the unit firmly on the ground and blocked. Shut off the hydraulic power supply and disconnect hydraulic couplers.
Do Not loan your brush cutter to another skid steer owner. The potential exists for hydraulic contamination and could shorten the life of your skid steer or the hydraulic motor on your Brush Wolf brush cutter.
— 11 — www.brushwolf.com
Troubleshooting
Problem Check
Loss of Power Low hydraulic fluid level Overheated hydraulic fluid* Contaminated hydraulic fluid* Low gearbox lubricant level Broken gearbox /motor shear pin Missing input shaft key
Excessive Dull, broken or damaged bladesUnit Vibration Bent gearbox shaft Blade carrier out of balance Loose nuts and bolts New blade or bolts matched with worn blade or bolts Wire or rope wrapped around blades
Leaking Oil Loose hydraulic connections Ruptured hydraulic motor seals Bent gearbox shaft Loose or missing motor drain plug Ruptured hydraulic motor seals
*May damage hydraulic motor and void warranty
Note: When performing maintenance, shut down the skid steer and remove hydraulic hoses from the power source.
— 12 —
4200 Parts Diagram - Standard Pick-up plate
— 13 — www.brushwolf.com
4200 Parts ListITEM ITEM QTY PART NUMBER DESCRIPTION
1 1 15603 ASSEMBLY, BLADE CARRIER, BW 4200
2 1 15102 GUARD, COUPLING, BW, STD 4200
3 2 15631 HOSE WHIP ASSEMBLY, -8 ORFS, FEMALE SWIVEL COUPLINGS, 0.500 X 66.00 HOSE
4 1 15054 PLATE, ACCESS, 2 HOLE, 5.250 X 3.250 X 0.250
5 1 15108 ROD, ROUND, 0.375 X 41.000
6 1 15624 WELDMENT, FRAME, BW4200
7 4 15584 ADAPTER, STRAIGHT, #8 MORFS, #10 MORB
8 34 15285 CHAIN, 0.313, 4 LINK, PROOF COIL
9 1 15263 CLAMP, BODY, TWO PIECE, 22MM, TWO HOSE
10 1 15079 COUPLER, FLAT FACED, 1/2 MALE, 7/8-14, O-RING BOSS
11 1 15078 COUPLER, FLAT FACED, 1/2 FEMALE, 7/8-14, O-RING BOSS
12 1 15123 COUPLING, STD, 1.250 MOTOR, 1.375 GB, 5.500
13 1 15264 COVER PLATE, CLAMP, 22MM, TWO HOSE
14 1 15131 DECAL KIT, BW 4200
15 1 15091 GEARBOX, 40HP, 1.375 INPUT, 12 TOOTH SPLINE OUTPUT, 1:1.93 RATIO
16 1 15352 MOTOR, 4.9 CU IN, SAE “A” 2 BOLT, 7/8-14 SAE O-RING BO PORTS, 1.250 DIA X 1.250 KEYED SHAFT, 3500/750 RELIEF, EATON
17 2 Hardware BOLT, HH, 1/2-13 X 2 UNC, GRD 5, ZINC
18 1 15274* BOLT, HH, 1/2-13 X 3, GRD 2, ZINC
19 1 Hardware BOLT, HH, 1/2-13 X 3/4 UNC, GRD 5, ZINC
20 1 Hardware BOLT, HH, 5/16-18 X 1 3/4, GRD 5, ZINC
21 4 Hardware BOLT, HH, 5/16-18 X 3/4 GRD 5, ZINC
22 3 Hardware NUT, NYLOCK, 1/2-13, ZINC
23 4 Hardware NUT, NYLOCK, 3/8-16, ZINC
24 4 Hardware NUT, NYLOCK, 5/8-18, ZINC
25 2 Hardware SET SCREW_CP_1_4-20X3_8 UNC
26 4 Hardware WASHER, FLAT, 3/8, ZINC
27 4 Hardware WASHER, FLAT, 5/16, ZINC
28 2 15381 WASHER, NORD-LOCK, 0.500 X 1.000 OD, ZINC
29 4 15380 WASHER, NORD-LOCK, 0.625 X 1.210 OD, ZINC
30 2 Hardware WASHER, SPRING LOCK, .500, ZINC
31 5 Hardware WASHER, SPRING LOCK, 5/16, ZINC*SHEAR BOLT
— 14 —
4800 Parts Diagram - Low Flow & Standard
— 15 — www.brushwolf.com
4800 Parts List - Low Flow & Standard
ITEM ITEM QTY PART NUMBER DESCRIPTION
1 1 15054 PLATE, ACCESS, 2 HOLE, 5.250 X 3.250 X 0.250
2 1 15067 GUARD, COUPLING, BW, STD
3 1 15109 ROD, ROUND, 0.375 X 47.000
4 1 15133 DECAL KIT, BW 4800
5 1 15597 HOSE WHIP ASSEMBLY, -8 ORFS, FEMALE SWIVEL COUPLINGS, 0.750 X 78.000 HOSE
6 1 15632 WELDMENT FRAME BW 4800
7 1 15652 ASSEMBLY BLADE CARRIER, BW 4800
8 36 15068 CHAIN, 0.313, 5 LINK, PROOF COIL
9 1 15078 COUPLER, FLAT FACED, 1/2 FEMALE, 7/8-14, O-RING BOSS
10 1 15079 COUPLER, FLAT FACED, 1/2 MALE, 7/8-14, O-RING BOSS
11 1 15093 GEARBOX, 62HP, 1:1.93 RATIO
12 1 15123 COUPLING, STD, 1.250 MOTOR, 1.375 GB, 5.500
13 1 15248 CLAMP, BODY, TWO PIECE, 30MM, TWO HOSE
14 1 15249 COVER PLATE, CLAMP, 30MM, TWO HOSE
15 1 15353* STANDARD FLOW BRUSH CUTTER - MOTOR, 6.2 CU IN, SAE “A” 2 BOLT, 7/8-14-12 SAE O-RING PORTS, 1.250 DIA X 1.250 KEYED SHAFT, 3500/750 RELIEF, EATON
15 1 15352* LOW FLOW (LF) BRUSH CUTTER - MOTOR, 4.9 CU IN, SAE “A” 2 BOLT, 7/8-14 SAE O-RING PORTS, 1.250 DIA X 1.250 KEYED SHAFT, 3500/750 RELIEF, EATON
16 4 15584 ADAPTER, STRAIGHT, #8 MORFS, #10 MORB
17 2 Hardware BOLT, HH, 1/2-13 X 2 UNC, GRD 5, ZINC
18 1 Hardware BOLT, HH, 1/2-13 X 3/4 UNC, GRD 5, ZINC
19 1 15274** BOLT, HH, 1/2-13 X 3, GRD 2, ZINC
20 1 Hardware BOLT, HH, 5/16-18 X 2 1/2, GRD 5, ZINC
21 4 Hardware BOLT, HH, 5/16-18 X 3/4, GRD 5, ZINC
22 4 Hardware NUT, NYLOCK, 3/8-16, ZINC
23 3 Hardware NUT, NYLOCK, 1/2-13, ZINC
24 4 Hardware NUT, NYLOCK, 3/4-10, ZINC
25 2 Hardware SET SCREW_CP_1_4-20X3_8 UNC
26 4 Hardware WASHER, FLAT, 3/8, ZINC
27 4 Hardware WASHER, FLAT, 5/16, ZINC
28 2 Hardware WASHER, SPRING LOCK, .500, ZINC
29 5 Hardware WASHER, SPRING LOCK, 5/16, ZINC
30 2 15381 WASHER, NORD-LOCK, 0.500 X 1.000 OD, ZINC
31 4 15379 WASHER, NORD-LOCK, 0.750 X 1.210 OD, ZINC
* DEPENDS ON MODEL OF BRUSH CUTTER** SHEAR BOLT
— 16 —
6000 Model Parts List - Low Flow & Standard
— 17 — www.brushwolf.com
6000 Parts List - Low Flow & Standard
ITEM ITEM QTY PART NUMBER DESCRIPTION
1 1 15000 WELDMENT FRAME BW 6000
2 1 15054 PLATE, ACCESS, 2 HOLE, 5.250 X 3.250 X 0.250
3 1 15056 ASSEMBLY, BLADE CARRIER, BW 6000
4 1 15067 GUARD, COUPLING, BW, STD
5 1 15080 ROD, ROUND, 0.375 X 59.000
6 2 15597 HOSE WHIP ASSEMBLY, -8 ORFS, FEMALE SWIVEL COUPLINGS, 0.750 X 78.000 HOSE
7 1 15353* STANDARD FLOW BRUSH CUTTER - MOTOR, 6.2 CU IN, SAE “A” 2 BOLT, 7/8-14-12 SAE O-RING BO PORTS, 1.250 DIA X 1.250 KEYED SHAFT, 3500/750 RELIEF, EATON
7 1 15748* LOW FLOW BRUSH CUTTER - MOTOR, 8.0 CU IN, SAE “A” 2 BOLT, 7/8-14 SAE O-RING PORTS, 1.250 DIA X 1.250 KEYED SHAFT, 3500/750 RELIEF, EATON
8 46 15068 CHAIN, 0.313, 5 LINK, PROOF COIL
9 1 15069 DECAL KIT, BW 6000
10 1 15078 COUPLER, FLAT FACED, 1/2 FEMALE, 7/8-14, O-RING BOSS
11 1 15079 COUPLER, FLAT FACED, 1/2 MALE, 7/8-14, O-RING BOSS
12 1 15092* STANDARD FLOW BRUSH CUTTER - GEARBOX, 62HP, 1:1.46 RATIO
12 1 15093* LOW FLOW BRUSH CUTTER - GEARBOX, 62HP, 1:1.93 RATIO
13 1 15123 COUPLING, STD, 1.250 MOTOR, 1.375 GB, 5.500
14 1 15248 CLAMP, BODY, TWO PIECE, 30MM, TWO HOSE
15 1 15249 COVER PLATE, CLAMP, 30MM, TWO HOSE
16 4 15584 ADAPTER, STRAIGHT, #8 MORFS, #10 MORB
17 4 Hardware BOLT, HH, 5/16-18 X 3/4, GRD 5, ZINC
18 1 Hardware BOLT, HH, 5/16-18 X 2 1/2, GRD 5, ZINC
19 1 Hardware BOLT, HH, 1/2-13 X 3/4 UNC, GRD 5, ZINC
20 2 Hardware BOLT, HH, 1/2-13 X 2 UNC, GRD 5, ZINC
21 1 15274** BOLT, HH, 1/2-13 X 3, GRD 2, ZINC
22 4 Hardware NUT, NYLOCK, 3/8-16, ZINC
23 3 Hardware NUT, NYLOCK, 1/2-13, ZINC
24 4 Hardware NUT, NYLOCK, 3/4-10, ZINC
25 2 Hardware SET SCREW_CP_1_4-20X3_8 UNC
26 4 Hardware WASHER, FLAT, 5/16, ZINC
27 4 Hardware WASHER, FLAT, 3/8, ZINC
28 2 15381 WASHER, NORD-LOCK, 0.500 X 1.000 OD, ZINC
29 4 15379 WASHER, NORD-LOCK, 0.750 X 1.210 OD, ZINC
30 5 Hardware WASHER, SPRING LOCK, 5/16, ZINC
31 2 Hardware WASHER, SPRING LOCK, .500, ZINC
* DEPENDS ON THE MODEL OF BRUSH CUTTER** SHEAR BOLT
— 18 —
6600 Model Parts List - Low Flow & Standard
— 19 — www.brushwolf.com
6600 Parts List - Low Flow & StandardITEM ITEM QTY PART NUMBER DESCRIPTION
1 1 15054 PLATE, ACCESS, 2 HOLE, 5.250 X 3.250 X 0.250
2 1 15704 ASSEMBLY, BLADE CARRIER, BW 6600
3 1 15067 GUARD, COUPLING, BW, STD
4 1 15110 ROD, ROUND, 0.375 X 65.000
5 1 15703 WELDMENT FRAME BW 6600
6 2 15597 HOSE WHIP ASSEMBLY, -8 ORFS, FEMALE SWIVEL COUPLINGS, 0.750 X 78.000 HOSE
7 50 15068 CHAIN, 0.313, 5 LINK, PROOF COIL
8 1 15078 COUPLER, FLAT FACED, 1/2 FEMALE, 7/8-14, O-RING BOSS
9 1 15079 COUPLER, FLAT FACED, 1/2 MALE, 7/8-14, O-RING BOSS
10 1 15092* STANDARD FLOW BRUSH CUTTER - GEARBOX, 62HP, 1:1.46 RATIO
10 1 15093* LOW FLOW BRUSH CUTTER - GEARBOX, 62HP, 1:1.93 RATIO
11 1 15123 COUPLING, STD, 1.250 MOTOR, 1.375 GB, 5.500
12 1 15136 DECAL KIT, BW 6600
13 1 15248 CLAMP, BODY, TWO PIECE, 30MM, TWO HOSE
14 1 15249 COVER PLATE, CLAMP, 30MM, TWO HOSE
15 4 15584 ADAPTER, STRAIGHT, #8 MORFS, #10 MORB
16 1 15748 MOTOR, 8.0 CU IN, SAE “A” 2 BOLT, 7/8-14 SAE O-RING BO PORTS, 1.250 DIA X 1.250 KEYED SHAFT, 3500/750 RELIEF, EATON
17 4 Hardware BOLT, HH, 5/16-18 X 3/4, GRD 5, ZINC
18 1 Hardware BOLT, HH, 5/16-18 X 2 1/2, GRD 5, ZINC
19 1 Hardware BOLT, HH, 1/2-13 X 3/4 UNC, GRD 5, ZINC
20 1 15274** BOLT, HH, 1/2-13 X 3, GRD 2, ZINC
21 2 Hardware BOLT, HH, 1/2-13 X 2, GRD 5, ZINC
22 3 Hardware NUT, NYLOCK, 1/2-13, ZINC
23 4 Hardware NUT, NYLOCK, 3/8-16, ZINC
24 4 Hardware NUT, NYLOCK, 3/4-10, ZINC
25 2 Hardware SET SCREW_CP_1_4-20X3_8 UNC
26 4 Hardware WASHER, FLAT, 5/16, ZINC
27 4 Hardware WASHER, FLAT, 3/8, ZINC
28 2 15381 WASHER, NORD-LOCK, 0.5000 X 1.000 OD, ZINC
29 4 15379 WASHER, NORD-LOCK, 0.750 X 1.210 OD, ZINC
30 5 Hardware WASHER, SPRING LOCK, 5/16, ZINC
31 2 Hardware WASHER, SPRING LOCK, .500, ZINC
* DEPENDS OF THE MODEL OF BRUSH CUTTER** SHEAR BOLT
— 20 —
6600 HF Model Parts List - High Flow
— 21 — www.brushwolf.com
6600 HF Parts List - High Flow
ITEM ITEM QTY PART NUMBER DESCRIPTION
1 1 15054 PLATE, ACCESS, 2 HOLE, 5.250 X 3.250 X 0.250
2 1 15067 GUARD, COUPLING, BW, STD
3 1 15110 ROD, RND, 0.375 X 65.000
4 1 15418 PLATE, STAUFF, 3 HOLE COVER, 1.25 X 5.875
5 2 15589 HOSE WHIP ASSEMBLY, -12 ORFS, FEMALE SWIVEL COUPLINGS, 0.750 MFG X 78.000
6 1 15753 HOSE WHIP ASSEMBLY, -6 ORFS, FEMALE SWIVEL COUPLINGS, 0.375 MFG X 78.000 HOSE
7 1 15704 ASSEMBLY, BLADE CARRIER, BW6600
8 1 15734 WELDMENT, FRAME, BW 6600
9 1 15053 COUPLING, HF, 1.500 MOTOR, 1.375 GB, 5.500
10 50 15068 CHAIN, 0.313, 5 LINK, PROOF COIL
11 1 15114 COUPLER, 5/8 FEMALE, 1 1/6-12, O-RING BOSS
12 1 15115 COUPLER, 5/8 MALE, 1 1/6-12, O-RING BOSS
13 1 15092 GEARBOX, 62HP, 1:1.46 RATIO
14 1 15125 BLOCK, CROSSOVER RELIEF MANIFOLD, 6K MOTOR, ALUMINUM
15 1 15745 DECAL KIT, BW 6600 HF
16 1 15149 MOTOR, 11.9 CU IN, SAE “CC” 4 BOLT, 0.750 DIA SPLIT FLANGE BO STAGGERED PORTS, 1.500 DIA X 1.625 KEYED SHAFT BW
17 1 15401 CLAMP, BODY, TWO PIECE, 30-30-18, THREE HOSE, BLACK
18 4 15405 ADAPTER, STRAIGHT, #12 MORF, #12 MORB
19 1 15408 ADAPTER, STRAIGHT, #6 MORFS, #8 MORB
20 1 15414 COUPLER, FLAT FACED, 3/8 FEMALE, 3/4-16, O-RING BOSS
21 1 15737 ADAPTER, 45 DEG, #6 MORFS, #4 MORB
22 4 Hardware BOLT, HH, 1/2-13 X 2 1/2 UNC, GRD 5, ZINC
23 1 15274* BOLT, HH, 1/2-13 X 3, GRD 2, ZINC
24 1 Hardware BOLT, HH, 1/2-13 X 3/4 UNC, GRD 5, ZINC
25 2 Hardware BOLT, HH, 3/8-16 X 3, GRD 5, ZINC
26 4 Hardware BOLT, HH, 5/16-18 X 3/4, GRD 5, ZINC
27 5 Hardware NUT, NYLOCK, 1/2-13, ZINC
28 4 Hardware NUT, NYLOCK, 3/4-10, ZINC
29 4 Hardware NUT, NYLOCK, 3/8-16, ZINC
30 8 Hardware SCREW_ CAP_SH_ 3_8-16X3 1_2 GRD8
31 2 Hardware SET SCREW_CP_1_4-20X3_8 UNC
32 4 Hardware WASHER, FLAT, 1/2, ZINC
33 4 Hardware WASHER, FLAT, 3/8, ZINC
34 4 Hardware WASHER, FLAT, 5/16, ZINC
35 2 Hardware WASHER, SPRING LOCK, .500, ZINC
36 4 Hardware WASHER, SPRING LOCK, 5/16, ZINC
37 4 15379 WASHER, NORD-LOCK, 0.750 X 1.210 OD, ZINC
38 4 15381 WASHER, NORD-LOCK, 0.500 X 1.000 OD, ZINC*SHEAR BOLT
— 22 —
7200 Model Parts List - Low Flow & Standard
— 23 — www.brushwolf.com
7200 Parts List - Low Flow & Standard
ITEM ITEM QTY PART NUMBER DESCRIPTION
1 1 15054 PLATE, ACCESS, 2 HOLE, 5.250 X 3.250 X 0.250
2 1 15067 GUARD, COUPLING, BW, STD
3 1 15111 ROD, RND, 0.375 X 71.000
4 1 15138 DECAL KIT, BW 7200
5 2 15597 HOSE WHIP ASSEMBLY, -8 ORFS, FEMALE SWIVEL MFG COUPLINGS, 0.750 X 78.000 HOSE
6 1 15694 WELDMENT FRAME BW 7200
7 1 15700 ASSEMBLY, BLADE CARRIER, BW 7200
8 55 15068 CHAIN, 0.313, 5 LINK, PROOF COIL
9 1 15078 COUPLER, FLAT FACED, 1/2 FEMALE, 7/8-14, O-RING BOSS
10 1 15079 COUPLER, FLAT FACED, 1/2 MALE, 7/8-14, O-RING BOSS
11 1 15092* STANDARD FLOW BRUSH CUTTER - GEARBOX, 62HP, 1:1.46 RATIO
11 1 15093* LOW FLOW BRUSH CUTTER - GEARBOX, 62HP, 1:1.93 RATIO
12 1 15123 COUPLING, STD, 1.250 MOTOR, 1.375 GB, 5.500
13 1 15248 CLAMP, BODY, TWO PIECE, 30MM, TWO HOSE
14 1 15249 COVER PLATE, CLAMP, 30MM, TWO HOSE
15 4 15584 ADAPTER, STRAIGHT, #8 MORFS, #10 MORB
16 1 15748 MOTOR, 8.0 CU IN, SAE “A” 2 BOLT, 7/8-14 SAE O-RING BO PORTS, 1.250 DIA X 1.250 KEYED SHAFT, 3500/750 RELIEF, EATON
17 4 15379 WASHER, NORD-LOCK, 0.750 X 1.210 OD, ZINC
18 2 15381 WASHER, NORD-LOCK, 0.500 X 1.000 OD, ZINC
19 2 Hardware BOLT, HH, 1/2-13 X 2 UNC, GRD 5, ZINC
20 1 15274** BOLT, HH, 1/2-13 X 3, GRD 2, ZINC
21 1 Hardware BOLT, HH, 1/2-13 X 3/4 UNC, GRD 5, ZINC
22 1 Hardware BOLT, HH, 5/16-18 X 2 1/2, GRD 5, ZINC
23 4 Hardware BOLT, HH, 5/16-18 X 3/4, GRD 5, ZINC
24 3 Hardware NUT, NYLOCK, 1/2-13, ZINC
25 4 Hardware NUT, NYLOCK, 3/4-10, ZINC
26 4 Hardware NUT, NYLOCK, 3/8-16, ZINC
27 2 Hardware SET SCREW_CP_1_4-20X3_8 UNC
28 4 Hardware WASHER, FLAT, 3/8, ZINC
29 4 Hardware WASHER, FLAT, 5/16, ZINC
30 2 Hardware WASHER, SPRING LOCK, .500, ZINC
31 5 Hardware WASHER, SPRING LOCK, 5/16, ZINC
* DEPENDS ON THE MODEL OF BRUSH CUTTER**SHEAR BOLT
— 24 —
7200 HF Model Parts List - High Flow
— 25 — www.brushwolf.com
7200 HF Parts List - High Flow ITEM ITEM QTY PART NUMBER DESCRIPTION
1 1 15054 PLATE, ACCESS, 2 HOLE, 5.250 X 3.250 X 0.250
2 1 15067 GUARD, COUPLING, BW, STD
3 1 15111 ROD, RND, 0.375 X 71.000
4 1 15418 PLATE, STAUFF, 3 HOLE COVER, 1.25 X 5.875
5 2 15589 HOSE WHIP ASSEMBLY, -12 ORFS, FEMALE SWIVEL COUPLINGS, 0.750 MFG X 78.000 HOSE
6 1 15753 HOSE WHIP ASSEMBLY, -6 ORFS, FEMALE SWIVEL COUPLINGS, 0.375 MFG X 78.000 HOSE
7 1 15700 ASSEMBLY, BLADE CARRIER, BW 7200
8 1 15738 WELDMENT, FRAME, BW 7200 HF
9 1 15746 DECAL KIT, BW 7200 HF
10 1 15053 COUPLING, HF, 1.500 MOTOR, 1.375 GB, 5.500
11 54 15068 CHAIN, 0.313, 5 LINK, PROOF COIL
12 1 15114 COUPLER, 5/8 FEMALE, 1 1/6-12, O-RING BOSS
13 1 15115 COUPLER, 5/8 MALE, 1 1/6-12, O-RING BOSS
14 1 15092 GEARBOX, 62HP, 1:1.46 RATIO
15 1 15125 BLOCK, CROSSOVER RELIEF MANIFOLD, 6K MOTOR, ALUMINUM
16 1 15149 MOTOR, 11.9 CU IN, SAE “CC” 4 BOLT, 0.750 DIA SPLIT FLANGE BO STAGGERED PORTS, 1.500 DIA X 1.625 KEYED SHAFT BW
17 1 15401 CLAMP, BODY, TWO PIECE, 30-30-18, THREE HOSE, BLACK
18 4 15405 ADAPTER, STRAIGHT, #12 MORF, #12 MORB
19 1 15408 ADAPTER, STRAIGHT, #6 MORFS, #8 MORB
20 1 15414 COUPLER, FLAT FACED, 3/8 FEMALE, 3/4-16, O-RING BOSS
21 1 15737 ADAPTER, 45 DEG, #6 MORFS, #4 MORB
22 4 Hardware BOLT, HH, 1/2-13 X 2 1/2 UNC, GRD 5, ZINC
23 1 15274* BOLT, HH, 1/2-13 X 3, GRD 2, ZINC
24 1 Hardware BOLT, HH, 1/2-13 X 3/4 UNC, GRD 5, ZINC
25 2 Hardware BOLT, HH, 3/8-16 X 3, GRD 5, ZINC
26 4 Hardware BOLT, HH, 5/16-18 X 3/4, GRD 5, ZINC
27 5 Hardware NUT, NYLOCK, 1/2-13, ZINC
28 4 Hardware NUT, NYLOCK, 3/4-10, ZINC
29 4 Hardware NUT, NYLOCK, 3/8-16, ZINC
30 8 Hardware SCREW_ CAP_SH_ 3_8-16X3 1_2 GRD8
31 2 Hardware SET SCREW_CP_1_4-20X3_8 UNC
32 4 Hardware WASHER, FLAT, 1/2, ZINC
33 4 Hardware WASHER, FLAT, 3/8, ZINC
34 4 Hardware WASHER, FLAT, 5/16, ZINC
35 2 Hardware WASHER, SPRING LOCK, .500, ZINC
36 4 Hardware WASHER, SPRING LOCK, 5/16, ZINC
37 4 15379 WASHER, NORD-LOCK, 0.750 X 1.210 OD, ZINC
38 4 15381 WASHER, NORD-LOCK, 0.500 X 1.000 OD, ZINC
*SHEAR BOLT
— 26 —
7201 Parts Diagram - Low Flow & Standard
— 27 — www.brushwolf.com
7201 Parts List - Low Flow & Standard
ITEM ITEM QTY PART NUMBER DESCRIPTION
1 1 15054 PLATE, ACCESS, 2 HOLE, 5.250 X 3.250 X 0.250
2 1 15067 GUARD, COUPLING, BW, STD
3 1 15317 WELDMENT FRAME BW 7201
4 1 15343 ASSEMBLY, BLADE CARRIER, BW 7201
5 1 15344 DECAL KIT, BW 7201
6 2 15597 HOSE WHIP ASSEMBLY, -8 ORFS, FEMALE SWIVEL MFG COUPLINGS, 0.750 X 78.000 HOSE
7 1 15078 COUPLER, FLAT FACED, 1/2 FEMALE, 7/8-14, O-RING BOSS
8 1 15079 COUPLER, FLAT FACED, 1/2 MALE, 7/8-14, O-RING BOSS
9 1 15092* STANDARD FLOW BRUSH CUTTER - GEARBOX, 62HP, 1:1.46 RATIO
9 1 15093* LOW FLOW BRUSH CUTTER - GEARBOX, 62HP, 1:1.93 RATIO
10 1 15123 COUPLING, STD, 1.250 MOTOR, 1.375 GB, 5.500
11 1 15248 CLAMP, BODY, TWO PIECE, 30MM, TWO HOSE
12 1 15249 COVER PLATE, CLAMP, 30MM, TWO HOSE
13 1 15748 MOTOR, 8.0 CU IN, SAE “A” 2 BOLT, 7/8-14 SAE O-RING PORTS, 1.250 DIA X 1.250 KEYED SHAFT, 3500/750 RELIEF, EATON
14 4 15584 ADAPTER, STRAIGHT, #8 ORFS, #10 ORB
15 1 Hardware BOLT, HH, 5/16-18 X 2 1/2, GRD 5, ZINC
16 4 Hardware BOLT, HH, 5/16-18 X 3/4, GRD 5, ZINC
17 2 Hardware BOLT, HH, 1/2-13 X 2 UNC, GRD 5, ZINC
18 1 15274** BOLT, HH, 1/2-13 X 3, GRD 2, ZINC
19 4 Hardware NUT, NYLOCK, 3/8-16, ZINC
20 3 Hardware NUT, NYLOCK, 1/2-13, ZINC
21 4 Hardware NUT, NYLOCK, 3/4-10, ZINC
22 2 Hardware SET SCREW_CP_1_4-20X3_8 UNC
23 4 Hardware WASHER, FLAT, 5/16, ZINC
24 4 Hardware WASHER, FLAT, 3/8, ZINC
25 2 15381 WASHER, NORD-LOCK, 0.500 X 1.000 OD, ZINC
26 4 15379 WASHER, NORD-LOCK, 0.750 X 1.210 OD, ZINC
27 5 Hardware WASHER, SPRING LOCK, 5/16, ZINC
28 1 Hardware WASHER, SPRING LOCK, 3/8, ZINC
*DEPENDS ON THE MODEL OF BRUSH CUTTER**SHEAR BOLT
— 28 —
7201 Parts Diagram - High Flow
— 29 — www.brushwolf.com
7201 Parts List - High FlowITEM ITEM QTY PART NUMBER DESCRIPTION
1 1 15054 PLATE, ACCESS, 2 HOLE, 5.250 X 3.250 X 0.250
2 1 15067 GUARD, COUPLING, BW, STD
3 1 15343 ASSEMBLY, BLADE CARRIER, BW 7201 HF
4 1 16487 DECAL KIT, BW 7201 HF
5 1 15418 PLATE, STAUFF, 3 HOLE COVER, 1.25 X 5.875
6 2 15589 HOSE WHIP ASSEMBLY, -12 ORFS, FEMALE SWIVEL COUPLINGS, 0.750 X 78.000 HOSE
7 1 15753 HOSE WHIP ASSEMBLY, -6 ORFS, FEMALE SWIVEL COUPLINGS, 0.375 MFG X 78.000 HOSE
8 1 16486 WELDMENT FRAME BW 7201 HF
9 1 15053 COUPLING, HF, 1.500 MOTOR, 1.375 GB, 5.500
10 1 15092 GEARBOX, 62HP, 1:1.46 RATIO
11 1 15114 COUPLER, FLAT FACED. 5/8 FEMALE, 1 1/6-12, O-RING BOSS
12 1 15115 COUPLER, FLAT FACED, 5/8 MALE, 1 1/6-12, O-RING BOSS
13 1 15414 COUPLER, FLAT FACED, 3/8 FEMALE, 3/4-16, O-RING BOSS
14 1 15125 BLOCK, CROSSOVER RELIEF MANIFOLD, 6K MOTOR, ALUMINUM
15 1 15149 MOTOR, 11.9 CU IN, SAE “CC” 4 BOLT, 0.750 DIA SPLIT FLANGE BO STAGGERED PORTS, 1.500 DIA X 1.625 KEYED SHAFT BW
16 1 15401 CLAMP, BODY, TWO PIECE, 30-30-18, THREE HOSE, BLACK
17 4 15405 ADAPTER, STRAIGHT, #12 MORF, #12 MORB
18 1 15408 ADAPTER, STRAIGHT, #6 MORFS, #8 MORB
19 1 15737 ADAPTER, 45 DEG, #6 MORFS, #4 MORB
20 4 15381 WASHER, NORD-LOCK, 0.500 X 1.000 OD, ZINC
21 4 15379 WASHER, NORD-LOCK, 0.750 X 1.210 OD, ZINC
22 1 15274* BOLT, HH, 1/2-13 X 3, GRD 2, ZINC
23 5 Hardware NUT, NYLOCK, 1/2-13, ZINC
24 2 Hardware BOLT, HH, 3/8-16 X 3, GRD 5, ZINC
25 2 Hardware SET SCREW_CP_1_4-20X3_8 UNC
26 4 Hardware WASHER, FLAT, 5/16, ZINC
27 4 Hardware WASHER, SPRING LOCK, 5/16, ZINC
28 4 Hardware BOLT, HH, 5/16-18 X 3/4, GRD 5, ZINC
29 1 Hardware WASHER, SPRING LOCK, .500, ZINC
30 4 Hardware WASHER, FLAT, 1/2, ZINC SCREW_ CAP_SH_ 3_8-16X3 1_2 GRD8
31 4 Hardware BOLT, HH, 1/2-13 X 3/4 UNC, GRD 5, ZINC
32 4 Hardware NUT, NYLOCK, 3/8-16, ZINC
33 4 Hardware WASHER, FLAT, 3/8, ZINC
34 4 Hardware NUT, NYLOCK, 3/4-10, ZINC
35 8 Hardware SCREW_CAP_SH_3_8-16X3 1_2 GRD8
*SHEAR BOLT
— 30 —
7800 Parts Diagram - Standard Flow
— 31 — www.brushwolf.com
7800 Parts List - Standard Flow
ITEM ITEM QTY PART NUMBER DESCRIPTION
1 1 15054 PLATE, ACCESS, 2 HOLE, 5.250 X 3.250 X 0.250
2 1 15067 GUARD, COUPLING, BW, STD
3 1 15112 ROD, RND, 0.375 X 77.000
4 2 15597 HOSE WHIP ASSEMBLY, -8 ORFS, FEMALE SWIVEL MFG COUPLINGS, 0.750 X 78.000 HOSE
5 1 15733 ASSEMBLY, BLADE CARRIER, BW 7800
6 1 15139 DECAL KIT, BW 7800
7 1 15718 WELDMENT FRAME BW 7800
8 60 15068 CHAIN, 0.313, 5 LINK, PROOF COIL
9 1 15078 COUPLER, FLAT FACED, 1/2 FEMALE, 7/8-14, O-RING BOSS
10 1 15079 COUPLER, FLAT FACED, 1/2 MALE, 7/8-14, O-RING BOSS
11 1 15092 GEARBOX, 62HP, 1:1.46 RATIO
12 1 15123 COUPLING, STD, 1.250 MOTOR, 1.375 GB, 5.500
13 1 15248 CLAMP, BODY, TWO PIECE, 30MM, TWO HOSE
14 1 15249 COVER PLATE, CLAMP, 30MM, TWO HOSE
15 4 15584 ADAPTER, STRAIGHT, #8 MORFS, #10 MORB
16 1 15748 MOTOR, 8.0 CU IN, SAE “A” 2 BOLT, 7/8-14 SAE O-RING BO PORTS, 1.250 DIA X 1.250 KEYED SHAFT, 3500/750 RELIEF, EATON
17 2 Hardware BOLT, HH, 1/2-13 X 2 UNC, GRD 5, ZINC
18 1 15274* BOLT, HH, 1/2-13 X 3, GRD 2, ZINC
19 1 Hardware BOLT, HH, 1/2-13 X 3/4 UNC, GRD 5, ZINC
20 1 Hardware BOLT, HH, 5/16-18 X 2 1/2, GRD 5, ZINC
21 4 Hardware BOLT, HH, 5/16-18 X 3/4, GRD 5, ZINC
22 3 Hardware NUT, NYLOCK, 1/2-13, ZINC
23 4 Hardware NUT, NYLOCK, 3/4-10, ZINC
24 4 Hardware NUT, NYLOCK, 3/8-16, ZINC
25 2 Hardware SET SCREW_CP_1_4-20X3_8 UNC
26 4 Hardware WASHER, FLAT, 3/8, ZINC
27 4 Hardware WASHER, FLAT, 5/16, ZINC
28 2 Hardware WASHER, SPRING LOCK, .500, ZINC
29 5 Hardware WASHER, SPRING LOCK, 5/16, ZINC
30 4 15379 WASHER, NORD-LOCK, 0.750 X 1.210 OD, ZINC
31 2 15381 WASHER, NORD-LOCK, 0.500 X 1.000 OD, ZINC
*Shear Bolt
— 32 —
7800 HF Parts Diagram - High Flow
— 33 — www.brushwolf.com
7800 HF Parts List - High FlowITEM ITEM QTY PART NUMBER DESCRIPTION
1 1 15054 PLATE, ACCESS, 2 HOLE, 5.250 X 3.250 X 0.250
2 1 15067 GUARD, COUPLING, BW, STD
3 1 15112 ROD, RND, 0.375 X 77.000
4 1 15418 PLATE, STAUFF, 3 HOLE COVER, 1.25 X 5.875
5 2 15589 HOSE WHIP ASSEMBLY, -12 ORFS, FEMALE SWIVEL COUPLINGS, 0.750 MFG X 78.000 HOSE
6 1 15753 HOSE WHIP ASSEMBLY, -6 ORFS, FEMALE SWIVEL COUPLINGS, 0.375 MFG X 78.000 HOSE
7 1 15733 ASSEMBLY, BLADE CARRIER, BW 7800 HF
8 1 15740 WELDMENT FRAME BW 7800 HF
9 1 15747 DECAL KIT, BW 7800 HF
10 1 15053 COUPLING, HF, 1.500 MOTOR, 1.375 GB, 5.500
11 60 15068 CHAIN, 0.313, 5 LINK, PROOF COIL
12 1 15114 COUPLER, 5/8 FEMALE, 1 1/6-12, O-RING BOSS
13 1 15115 COUPLER, 5/8 MALE, 1 1/6-12, O-RING BOSS
14 1 15414 COUPLER, FLAT FACED, 3/8 FEMALE, 3/4-16, O-RING BOSS
15 1 15092 GEARBOX, 62HP, 1:1.46 RATIO
16 1 15125 BLOCK, CROSSOVER RELIEF MANIFOLD, 6K MOTOR, ALUMINUM
17 1 15149 MOTOR, 11.9 CU IN, SAE “CC” 4 BOLT, 0.750 DIA SPLIT FLANGE BO STAGGERED PORTS, 1.500 DIA X 1.625 KEYED SHAFT BW
18 1 15401 CLAMP, BODY, TWO PIECE, 30-30-18, THREE HOSE, BLACK
19 4 15405 ADAPTER, STRAIGHT, #12 MORF, #12 MORB
20 1 15408 ADAPTER, STRAIGHT, #6 MORFS, #8 MORB
21 1 15737 ADAPTER, 45 DEG, #6 MORFS, #4 MORB
22 4 Hardware BOLT, HH, 1/2-13 X 2 UNC, GRD 5, ZINC
23 1 15274* BOLT, HH, 1/2-13 X 3, GRD 2, ZINC
24 1 Hardware BOLT, HH, 1/2-13 X 3/4 UNC, GRD 5, ZINC
25 2 Hardware BOLT, HH, 3/8-16 X 3, GRD 5, ZINC
26 4 Hardware BOLT, HH, 5/16-18 X 3/4, GRD 5, ZINC
27 5 Hardware NUT, NYLOCK, 1/2-13, ZINC
28 4 Hardware NUT, NYLOCK, 3/4-10, ZINC
29 4 Hardware NUT, NYLOCK, 3/8-16, ZINC
30 8 Hardware SCREW_ CAP_SH_ 3_8-16X3 1_2 GRD8
31 2 Hardware SET SCREW_CP_1_4-20X3_8 UNC
32 4 Hardware WASHER, FLAT, 1/2, ZINC
33 4 Hardware WASHER, FLAT, 3/8, ZINC
34 4 Hardware WASHER, FLAT, 5/16, ZINC
35 2 Hardware WASHER, SPRING LOCK, .500, ZINC
36 4 Hardware WASHER, SPRING LOCK, 5/16, ZINC
37 4 15379 WASHER, NORD-LOCK, 0.750 X 1.210 OD, ZINC
38 4 15381 WASHER, NORD-LOCK, 0.500 X 1.000 OD, ZINC
*SHEAR BOLT
— 34 —
9000 Model Parts Diagram- Standard Flow
— 35 — www.brushwolf.com
9000 Parts List - Standard FlowITEM ITEM QTY PART NUMBER DESCRIPTION
1 2 15656 ASSEMBLY, BLADE CARRIER, BW 7201
2 2 15067 GUARD, COUPLING, BW, STD
3 1 15674 HOOD, BW 9000
4 2 15054 PLATE, ACCESS, 2 HOLE, 5.250 X 3.250 X 0.250
5 1 15675 WELDMENT FRAME BW 9000
6 2 15590 HOSE WHIP ASSEMBLY, -12 ORFS, FEMALE SWIVEL COUPLINGS, 0.750 X 90.000 HOSE
7 1 16019 HOSE WHIP ASSEMBLY, -6 ORFS, FEMALE SWIVEL COUPLINGS, 0.375 X 35.000 HOSE
8 2 16173 HOSE WHIP ASSEMBLY, -12ORFS, FEMALE SWIVEL COUPLINGS, 0.750 X 45.000 HOSE
9 1 16176 HOSE WHIP ASSEMBLY, -12ORFS, FEMALE SWIVEL COUPLINGS, 0.750 X 60.000 HOSE
10 4 15699 ADAPTER, 90 DEG, #12 MORFS, #12 MORB
11 1 16171 ADAPTER, 90 DEG, #6 MORFS, #6 MORB
12 6 15405 ADAPTER, STRAIGHT, #12 MORFS MALE, #12 MORB
13 1 15407 ADAPTER, STRAIGHT, #6 MORFS MALE, #4 MORB
14 1 15126 BLOCK, CROSSOVER RELIEF MANIFOLD, BW 9000
15 1 15691 CLAMP, BODY, 0.750 HOSE, BOTTOM HALF
16 1 15690 CLAMP, BODY, 0.750 HOSE, TOP HALF
17 1 15248 CLAMP, BODY, TWO PIECE, 30MM, TWO HOSE
18 1 15079 COUPLER, FLAT FACED, 1/2 MALE, 7/8-14, O-RING BOSS
19 1 15078 COUPLER, FLAT FACED, 1/2 FEMALE, 7/8-14, O-RING BOSS
20 2 15123 COUPLING, STD, 1.250 MOTOR, 1.375 GB, 5.500
21 1 15249 COVER PLATE, CLAMP, 30MM, TWO HOSE
22 1 15140 DECAL KIT, BW 9000
23 2 15093 GEARBOX, 62HP, 1:1.93 RATIO
24 1 15692 GROMMET, RUBBER, 0.750
25 2 15090 MOTOR, 6.2 CU IN, SAE “A” 2 BOLT,1-1/16-12 SAE O-RING BO PORTS, 1.250 DIA X 1.250 KEYED SHAFT
26 4 Hardware BOLT, HH, 1/2-13 X 2 UNC, GRD 5, ZINC
27 2 15274* BOLT, HH, 1/2-13 X 3, GRD 2, ZINC
28 1 Hardware BOLT, HH, 5/16-18 X 2 1/2, GRD 5, ZINC
29 8 Hardware BOLT, HH, 5/16-18 X 3/4, GRD 5, ZINC
30 6 Hardware NUT, NYLOCK, 1/2-13, ZINC
31 8 Hardware NUT, NYLOCK, 3/4-10, ZINC
32 13 Hardware NUT, NYLOCK, 3/8-16, ZINC
33 4 Hardware SET SCREW_CP_1_4-20X3_8 UNC
34 13 Hardware WASHER, FLAT, 3/8, ZINC
35 8 Hardware WASHER, FLAT, 5/16, ZINC
36 4 15381 WASHER, NORD-LOCK, 0.500 X 1.000 OD, ZINC
37 8 15379 WASHER, NORD-LOCK, 0.750 X 1.210 OD, ZINC
38 6 15685 WASHER, RUBBER SEAL, 0.812 OD X 0.355 ID X .094
39 2 Hardware WASHER, SPRING LOCK, .500, ZINC
40 9 Hardware WASHER, SPRING LOCK, 5/16, ZINC
*SHEAR BOLT
— 36 —
9000 HF Model Parts Diagram - High Flow Model
PLUMBING LAYOUT
— 37 — www.brushwolf.com
ITEM ITEM QTY PART NUMBER DESCRIPTION
1 2 15656 ASSEMBLY, BLADE CARRIER, BW 9000HF
2 2 15067 GUARD, COUPLING, BW, STD
3 1 15674 HOOD, BW 9000 HF
4 1 15684 WELDMENT FRAME BW 9000 HF
5 2 15590 HOSE WHIP ASSEMBLY, -12 ORFS, FEMALE SWIVEL COUPLINGS, 0.750 X 90.000 HOSE
6 1 16172 HOSE WHIP ASSEMBLY, -12 ORFS, FEMALE SWIVEL COUPLINGS, 0.750 X 29.000 HOSE
7 1 16173 HOSE WHIP ASSEMBLY, -12 ORFS, FEMALE SWIVEL COUPLINGS, 0.750 X 45.000 HOSE
8 1 16174 HOSE WHIP ASSEMBLY, -12 ORFS, FEMALE SWIVEL COUPLINGS, 0.750 X 75.000 HOSE
9 1 16175 HOSE WHIP ASSEMBLY, -6 ORFS, FEMALE SWIVEL COUPLINGS, 0.750 X 80.000 HOSE
10 1 16177 HOSE WHIP ASSEMBLY, -6 ORFS, FEMALE SWIVEL COUPLINGS,0.375 X 114.000 HOSE
11 2 15054 PLATE, ACCESS, 2 HOLE, 5.250 X 3.250 X 0.250
12 1 15418 PLATE, STAUFF, 3 HOLE COVER, 1.25 X 5.875
13 6 15405 ADAPTER, STRAIGHT, #12 MORF, #12 MORB
14 4 15689 ADAPTER, STRAIGHT, #12 MORFS MALE, #16 MORB
15 2 15407 ADAPTER, STRAIGHT, #6 MORFS, #4 MORB
16 1 15408 ADAPTER, STRAIGHT, #6 MORFS, #8 MORB
17 1 15126 BLOCK, CROSSOVER RELIEF MANIFOLD, BW 9000
18 1 15691 CLAMP, 0.750 HOSE, BOTTOM HALF
19 1 15690 CLAMP, 0.750 HOSE, TOP HALF
20 1 15401 CLAMP, BODY, TWO PIECE, 30-30-18, THREE HOSE, BLACK
21 1 15115 COUPLER, 5/8 MALE, 1 1/6-12, O-RING BOSS22 1 15114 COUPLER, 5/8 FEMALE, 1 1/6-12, O-RING BOSS23 1 15414 COUPLER, FLAT FACED, 3/8 FEMALE, 3/4-16, O-RING BOSS
24 2 15053 COUPLING, HF, 1.500 MOTOR, 1.375 GB, 5.500
25 1 15600 DECAL KIT, BW 9000 HF
26 2 15093 GEARBOX, 62HP, 1:1.93 RATIO
27 1 15692 GROMMET, RUBBER, 0.750 HOSE
28 2 15088 MOTOR, 11.9 CU IN, SAE “C” 4 BOLT, 1 5/16-12 SAE O-RING PORTS, 1.500 DIA X 1.625 KEYED SHAFT
29 1 15687 PLUG, ORB, #6
30 1 15693 TEE, #6 MORFS , #6 MORFS, #6 FORFS
31 8 Hardware BOLT, HH, 1/2-13 X 2 1/2 UNC, GRD 5, ZINC
32 2 Hardware BOLT, HH, 3/8-16 X 3, GRD 5, ZINC
33 8 Hardware BOLT, HH, 5/16-18 X 3/4, GRD 5, ZINC
34 2 15274* BOLT, HH, 1/2-13X3 GRD 2
35 10 Hardware NUT, NYLOCK, 1/2-13, ZINC
36 4 Hardware SET SCREW_CP_1_4-20X3_8 UNC
37 13 Hardware NUT, NYLOCK, 3/8-16, ZINC
38 8 Hardware NUT, NYLOCK, 3/4-10, ZINC
39 8 Hardware WASHER, FLAT, 1/2, ZINC
40 13 Hardware WASHER, FLAT, 3/8, ZINC
9000 HF Parts List - High Flow
Parts List - CONTINUED on the following page* Shear Bolt
— 38 —
9000 HF Parts List - High Flow Model - CONTINUED
ITEM ITEM QTY PART NUMBER DESCRIPTION
41 8 Hardware WASHER, FLAT, 5/16, ZINC
42 8 15381 WASHER, NORD-LOCK, 0.500 X 1.000 OD, ZINC
43 8 15379 WASHER, NORD-LOCK, 0.750 X 1.210 OD, ZINC
44 6 15685 WASHER, RUBBER SEAL, 0.812 OD X 0.355 ID X .094
45 2 Hardware WASHER, SPRING LOCK, .500, ZINC
46 8 Hardware WASHER, SPRING LOCK, 5/16, ZINC
— 39 — www.brushwolf.com
THIS PAGE IS INTENTIONALLY
BLANK
— 40 —
4800 Blade Carrier & Parts Diagram
ITEM ITEM QTY PART NUMBER DESCRIPTION
1 1 15098 WELDMENT, BLADE BAR, 26.000 X 5.000 X 1.000 PLATE2 1 15266 SET OF 2 - BLADE, 14.750 X 4.000 X .5003 2 15066 BOLT, D-BOLT, 1 1/8-12, BW
4 2 HARDWARE WASHER, FLAT, 1 1/8, F436, ZINC5 2 15148 NUT, TOP LOCK, 1 1/8-12, GRADE C, PLAIN
4200 Blade Carrier & Parts Diagram
ITEMITEM QTY
PART NUMBER DESCRIPTION
1 1 15265 SET OF 2 - BLADE, 14.750 X 4.000 X .5002 2 15066 BOLT, D-BOLT, 1 1/8-12, BW3 1 15096 WELDMENT, BLADE BAR, 20.000 X 5.000 X 1.000 PLATE4 2 15148 NUT, TOP LOCK, 1 1/8-12, GRADE C, PLAIN5 2 HARDWARE WASHER, FLAT, 1 1/8, F436, ZINC
— 41 — www.brushwolf.com
ITEMITEM QTY
MODEL NUMBER
PART NUMBER DESCRIPTION
1 1 ALL 15057 WELDMENT, BLADE CARRIER, 25.000 DIA X .313, SPUN FORMED PAN2 1 6000 15267 SET OF 2 - BLADE, 22.000 X 4.000 X .5002 1 6600 15268 SET OF 2 - BLADE, 24.000 X 4.000 X .500
2 1 7200 15269 SET OF 2 - BLADE, 28.000 X 4.000 X .5002 1 7201 16186 SET OF 2 - BLADE, 28.000 X 4.000 X .500 - NO LIFT2 1 7800 15270 SET OF 2 - BLADE, 31.000 X 4.000 X .5002 1 9000 15271 SET OF 4 - BLADE, 14.750 X 4.000 X .5003 2 ALL 15066 BOLT, D-BOLT, 1 1/8-12, BW4 2 ALL 15148 NUT, TOP LOCK, 1 1/8-12, GRADE C, PLAIN
Blade Carrier & Parts Diagram - 6000, 6600, 7200, 7201, 7800, 9000
— 42 —
Dealer Instructions / Purchaser
Checklist
The checklist below is important information for the Dealer to review with the Purchaser.
Mail, email, or fax a copy to:
Cross-Tech Manufacturing, Inc.33877 Gendreau RoadCrosslake, MN 56442email: info@brushwolf.comAlso available to fill out on-line: www.brushwolf.com/warranty/
Explain and alert buyer of High Flow motor and case drain - if applicable.
Explain and demonstrate operation of the Brush Wolf attachment.
Explain and demonstrate inspection points and frequency; including nuts, bolts, blades, hoses, etc. Review the Owner/Operator Manual Safety Instructions. Alert buyer not to remove safety devices or decals. Advise buyer that all safety decals are available upon request.
SAFETY OPERATIONS CHECKLIST
Dealer Information
Dealer Company Name
Technician Name
City State/Province/ Region
— 43 — www.brushwolf.com
Warranty Registration FormThank you for choosing Brush Wolf. Please complete the form below to register your Brush Wolf prod-uct. There is a form available to fill out on-line at www.brushwolf.com. Please complete the Warranty Registration form within 30 days of purchase date to qualify for warranty.
Purchaser Information
Company
Contact Name
Phone
Address 1
Address 2
City State/Province/Region
Zip/Postal Code Country
Model Number: Serial Number:
Date of purchase MM DD YYYY
Would you recommend this product to your friends? Yes NoCondition of the product? Excellent Good Fair Poor
Cross-Tech Manufacturing, Inc.33877 Gendreau RoadCrosslake, MN 56442-9303email: info@brushwolf.comAlso available to fill out on-line: www.brushwolf.com
— 44 —
WARRANTY INFORMATION:
The Warranty Claim Form must be completed in full detail and received in good condition. Cross-Tech Manufacturing, Inc. limits it warranty to the hydraulic motor and gearbox for a period of one (1) year from the original date of sale. A three (3) year warranty is included on the structural steel from the date of sale.
A Warranty Registration Form for this equipment must exist before warranty claims will be valid. If a de-fect in a Cross-Tech Manufacturing product is discovered during the applicable warranty period, Cross-Tech will repair or replace, at its discretion the motor, gearbox or defective part. Cross-Tech Manufactur-ing, Inc. purchased components are subject to the original manufacturer’s warranty.
The equipment owner is responsible for proper maintenance. If the product is not maintained, all war-ranties by Cross-Tech Manufacturing will be null and void. Any modification to the product other than those made by Cross-Tech Manufacturing will cause this warranty to be void; including any modification or disassembly of motors, gearbox, etc.
This warranty does not extend to repairs, adjustments, or replacement of a Cross-Tech product or part that results from misuse, negligence, alteration, modification, tampering, improper maintenance or improper operation of the product. Claims submitted must be legible and in good condition. Cross-Tech does not cover service mileage, downtime or replacement of the attachment.
If a problem arises during the warranty period please contact your local dealer. The warranty is null and void if the product is modified or repaired without written consent from Cross-Tech Manufacturing. Cross-Tech units used in rental fleets are covered with a ninety (90) day warranty on the hydraulic mo-tor, gearbox, and structural steel with a valid warranty registration on file within thirty (30) days of the purchase date.
To file a warranty claim, please contact your dealer or Cross-Tech Manufacturing.
Copyright ©2017 (V7) Cross-Tech Manufacturing, Inc. All rights reserved.
Cross-Tech Manufacturing, Inc. 33877 Gendreau RoadCrosslake, MN 56442218-692-1050www.brushwolf.com
top related