specification guide - crane hire, contract lift ... · highest levels of training and equipment for...
Post on 15-Oct-2020
1 Views
Preview:
TRANSCRIPT
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
'BIG ENOUGH TO COPE, SMALL ENOUGH TO CARE'
KING LIFTINGTel: 0117 982 1121
www.kinglifting.co.uk
SPECIFICATION GUIDE
CONTENTS
INTRODUCTION
CONTENTS
GUIDANCE NOTES
LIFTING HEIGHT CHART
CRANES
SPECIALISED EQUIPMENT
TRANSPORT
CAPACITY CRANES8te Tadano TS 75M/L
25te Kato CR-250 (City Crane)
30te Terex/Demag AC30 (City Crane)
40te Terex/Demag AC40-2L
40te Terex/Demag AC40-1 (City Crane)
60te Grove GMK 3055
60te Terex/Demag AC60-3L
70te Terex/Demag AC70 (City Crane)
80te Terex/Demag AC80-2
CAPACITY CRANES 130te Grove GMK 5130
140te Terex Demag AC140-1
200te Terex/Demag AC200-1
250te Terex/Demag AC250-1
350te Terex Demag AC350-6
500te Liebherr LTM1500
9te Spierings SK 599-AT510te Spierings SK 1265-AT6
18te Spierings SK 2400-AT7
3te Maeda Compact Crane
CAPACITY SPECIALISED EQUIPMENT3000kg Caterpillar VC60E Forklift @ 500mm
5000kg Caterpillar VC110F Forklift @ 500mm
5500kg Mitsubishi FGC55K Forklift @ 600mm
6050kg Caterpillar T150D Forklift @ 600mm
CAPACITY SPECIALISED EQUIPMENT7000kg Hyster Spacesaver S7.00XL Forklift @ 600mm
15880kg Versa-Lift 25/35 @ 610mm Extended Ballast
27300kg Versa-Lift 40/60 @ 915mm Extended Ballast
100te Power Lift System
The Quick Guide to Notification attendant and Marker RequirementsCAPACITY TRANSPORT 150te MAN TGX 26.540 6x4 BBS150te MAN TGX 26.540 6x4 BBS150te MAN TGX 33.480 6x4 BBS90te MAN TGX 26.480 6X4 BLS10.2te Scania Rigid 8x4 + Fassi Crane S660A10.2te Scania Rigid 8x4 + Fassi Crane S660A14.0te Scania Rigid 8x4 + Palfinger Crane 35000B11te DAF FTG85CF 380 Rigid 6x4 + Atlas Crane3.0te Mercedes Attego 815 Rigid Flatbed with Side Boards
PLANT NO TRAILERS K1 ARB Semi-Low-loader Tri-AxleK2 King 6 Axle Ballast TrailerK4 King 6 Axle Ballast TrailerK5 SDC 45-70ft Tri-Axle Flatbed ExtendableK6 Overlander TPT36E Euroliner 13.2m Tri-AxleK8 McCauley c279917 Tri-Axle Drag TrailerK9 McCauley c281241 Tri-Axle Drag TrailerK10 King 5 Axle Ballast TrailerK11 Nooteboom 5 Axle Plant TrailerK12 Broshuis 5 Axle Ballast Trailer
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
PREVIOUS PAGE NEXT PAGE
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
INTRODUCTIONAFTER NEARLY 3 DECADES OF PROVIDING EXCELLENT SERVICE AND VALUE FOR MONEY, KING LIFTING IS TODAY THE LEADING CRANE HIRE, HEAVY LIFT, MACHINERY MOVEMENT AND TRANSPORT SPECIALIST IN THE UNITED KINGDOM.
Operating an extensive and modern fl eet of vehicles & equipment from a network of depots across the UK, has always allowed King Lifting to meet and exceed customers expectations. The fl eet includes all-terrain and city class cranes, mobile and pedestrian operated tower cranes together with semi low & low loaders, fl atbed vehicles fi tted with lorry loaders and highly specialised plant & machinery movement equipment.
The accreditation of our Quality Management System to BS EN ISO 9001:2001 is not only a sign of the company's effectiveness but is a guarantee of consistently high standards of service.
King Lifting as an Environmentally Friendly company operate an Environment Management System which complies to the requirements of BS EN ISO 14001:2004.
We are members of the Construction Plant-hire Association Freight Transport Association are a CPCS Construction Plant Competence Scheme accredited Test Centre and maintain both internal and external consultants to assist with all aspects of Health and Safety, Environmental and Employment Law.
At King Lifting we are totally committed to ensuring the safety of our customers, employees and the public. We continue to promote a safety culture and invest in the highest levels of training and equipment for all our employees.
If you choose to undertake the lifting operations on a CPA Crane Hire only basis, ‘BS 7121 - Safe Use of Cranes’ and recommendations from the Health and Safety Executive place the responsibility of providing a suitably qualified and experienced Appointed Person on the customer. The Appointed Person is responsible for planning the lift and preparing the necessary method statement and risk assessments prior to the commencement of the lifting operation.
In this high risk industry King Lifting recommend that customers who are not experienced in hiring cranes and therefore not aware of the responsibilities, duties and risks involved, take advantage of our CPA Contract Lift service.
KING LIFTING
DEPOTSKING LIFTING
BriSTOl DEPOTThirdway, Avonmouth, Bristol, BS11 9YLT: 01179 821121 F: 01179 235762
KING LIFTING BirMiNGHAM DEPOT
Aden Court, Coventry Road Solihull, West Midlands, B92 0DYT: 01675 446 840 F: 01675 443 457
KING LIFTING SOuTHAMPTON DEPOT
Unit 3, Oceanic Way, Marchwood Industrial Park, Marchwood, Southampton, SO40 4BDT: 02380 661384 F: 02380 661494
KING LIFTING SOuTH WAlES DEPOT
Tir-y-berth Industrial Est, Tir-y-berth, Hengoed, Mid Glamorgan, CF82 8AUT: 01443 812457 F: 01443 814143
KING LIFTING SWiNDON DEPOT
Darby Close, Cheney Manor Industrial Est, Swindon, SN2 2PN T: 01793 542740 F: 01793 514837
KING LIFTING lONDON (WEST) DEPOT
Stockley Farm Road, Stockley Park, West Drayton, UB7 9BWT: 01895 446443 F: 01895 446449
KING LIFTING lONDON (EAST) DEPOT
Albion Parade, Canal Basin, Gravesend, Kent, DA12 2RNT: 01474 321721 F: 01474 321821
KING LIFTING YEOVil DEPOT
Westlands, Lysander Road, Yeovil, BA20 2YBT: 07774 338336 F: 01935 704843
KiNG liFTiNG liMiTEDHEAD OFFicE: King Road Avenue Avonmouth Bristol BS11 9HFTel: 01179 821121 Fax: 01179 826244 Web: www.kinglifting.co.uk Depots aCRoss tHe UK
'big enoUgH to Cope, small enoUgH to CaRe'
PrEViOuS PAGE NEXT PAGEcONTENTS PAGE
DISCLAIMERThe configurations and duties for the cranes included in this specification are too numerous to include fully. The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
We also need to draw your attention to the guidance notes to assist you with your crane selection.
All aspects of this document are for guidance purposes only.If you have any queries regarding the content or you require more extensive specifications please contact your nearest depot or alternatively the technical department on 0117 982 1121.
CAUTION
UNLESS YOU UNDERSTAND THE REQUIREMENTS CONTAINED IN THIS GUIDE, WE WOULD RECOMMEND YOU CHOOSE A CONTRACT LIFT.
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
DEFINITION OF CPA CRANE HIRE AND CPA CONTRACT LIFTINTRODUCTION
The guide clarifies the contractual arrangement, duties, responsibilities and risks involved when hiring mobile cranes.
The Lifting Operations and Lifting Equipment regulations 1998 (LOLER) provide details of the statutory provisions for lifting operations. This is supported by the code of practice British Standard Safe Use of Cranes: BS7121 and in particular parts 1 and 3. Both of these documents clearly define the qualifications and duties of all personal involved.
TRAINING
The importance of correctly trained and certified personnel is critical King Lifting is committed to training and conducts regular training courses for employees and customers we are an CPCS accredited test and training centre.
Employees can contact our Health and Safety Department and customers should contact our training services on 0117 982 1121.
INSURANCE
The hire of any item of plant or equipment is inevitably accompanied by risk- either through accidental damage, theft or misuse. With the cost of modern mobile cranes ranging from £100,000 to over £2.5 million, the financial implications for customers in the event of a serious incident are significant.
BS7121- Safe Use of Cranes- notes these risks and highlights the need to protect against their consequences through appropriate comprehensive insurance cover. A factor which is now considered by many customers to be as important as the specification of equipment.
We at King Lifting are able to offer a damage waiver which is specifically tailored to the crane hire market at an increased cost and rely on own insurances.
Damage Waiver Scheme For CPA Crane Hire Only.
CPA Crane tire waives the right of recovery under Clause 13 of the CPA Model Conditions of Hire “Hirer’s Responsibility for Loss and Damage” at 16.5% of invoice value:
• Accidental damage to crane on hire to full replacement value. • Loss of hire charges as a result of loss or damage to the crane. • Cover in respect of goods being lifted up to a value of £25,000. Limit can be increased on request and the appropriate charge made.NB: Excesses and exclusions apply.
Insurance Cover arranged by us for use in respect of CPA Contract LiftInsurance is included within the contract lift price subject to following limits:
• A maximum liability of £25,000 in respect of goods lifted; • A maximum liability of £5 million in respect of loss or damage to other property or death/injury to persons (Public Liability).NB: Exclusions apply.
KING LIFTING
www.kinglifting.co.uk
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
DEFINITION OF CPA CRANE HIRE AND CPA CONTRACT LIFTCPA CRANE HIRE
Under the terms of a standard CPA Crane Hire agreement, the crane and the operator are the responsibility of the customer once the crane leaves the public highway in order to access site. This includes travel on any access roads in the event that the site is not immediately adjacent to the public highway.
The Customer’s Appointed Person is responsible for planning the lift and all the personnel and equipment involved. In addition, under CPA Model conditions, the Customer is responsible for and we recommend should provide for the following:
• Loss or damage to our plant and equipment whilst on site and under the customer’s control; • Loss of or damage to the goods being lifted; • Continuing hiring charges whilst the equipment is unable to work as a result of loss or damage; • Legal Liability-injury to the driver/operator whilst under the supervision and control of the Customer along with injury to third parties, including damage to their property, arising from crane operations.
For hires under CPA Crane Hire agreements, it is important to note the following:
• The Customer’s Appointed Person must have the knowledge and understanding of all aspects of the lifting operation; • The Crane Owner must supply a competent operator and crane fit for the intended purpose, BS7121- Safe use of Cranes gives a full description of such responsibilities.
If you wish your responsibilities to be waived an additional charge will be levied.
In summary, under a CPA Crane Hire agreement, it is the customer’s responsibility to fully plan, control, supervise and insure the crane operation and personnel.
CPA CONTRACT LIFT
Under the terms of standard CPA Contract Lift, the crane/equipment, operator and all personnel supplied with the crane, (including the Appointed Person/Crane Supervisor) are the responsibility of the Crane Owner.
The Crane Owner is responsible for all aspects of the planning and execution of the lift and will be insured for the following:
• Loss of or damage to plant/equipment caused solely by the owner’s negligence in the performance of lifting contract; • Loss of or damage to third party property caused solely by the owner’s negligence in the performance of the lifting contract subject to: A maximum liability of £25,000 in respect of goods being lifted; A maximum liability of £5 million in respect of loss of or damage to third party property or death/injury to third party persons.
KING LIFTING
www.kinglifting.co.uk
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
DEFINITION OF CPA CRANE HIRE AND CPA CONTRACT LIFTCPA CONTRACT LIFT
If you wish our limits to be increased an additional charge will be payable.
It is important to note that a CPA Crane Hire agreement only becomes a CPA Contract Lift when the crane owner supplies the Appointed Person/Crane Supervisor and hence, accepts liability for planning and supervising the lift.
Specifying the correct type of contract will ultimately improve safety and ensure that the correct system of work is adopted.
Under Contract Lift conditions the Customer still retains certain liabilities and therefore should hold adequate insurance to provide protection against incidents arising from:
• Own negligence; • Inadequate or unstable ground conditions; • Inadequate or incorrect information supplied in connection with the goods being lifted.
KING LIFTING
www.kinglifting.co.uk
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
MANAGEMENT & SUPERVISION FORSAFE LIFTING OPERATIONSA SUMMARY OF CONTRACT LIFTING
If an individual or organisation does not have expertise in lifting operations they should not hire cranes but should opt for the contract lift option.
EMPLOYING ORGANISATIONThe organisation requiring the load to be moved
HSE INSPECTORS WILL EXPECT TO FIND
• Llifting operations planned by trained, competent and appointed person(s);
• Lifting plan/method statement prepared as part of the project H&S Plan;
• Responsibilities established: clarity as to whether contact or crane hire terms apply;
• Crane outrigger support assessed i.e. identify loadings and load-bearing capacity of the ground;
• Slinging arrangements planned and slinging undertaken by trained and competent persons;
• Lifting operations supervised by trained persons and carried out in accordance with the lifting plan;
• Maintenance of machines and equipment supported by up to date examination reports.
HIRED CRANE (Hired & Managed)
THE EMPLOYING ORGANISATION MUST:
• Carry out all work in accordance with BS7121.
• Supply the “Appointed Person”.
• Plan the lift and operate a safe system of work.
• Ensure that the crane hired is of a suitable type and capacity.
• Check the credentials of the crane hire company and certifications supplied.
THE CRANE OWNER HAS A DUTY TO:
• Provided a crane that is properly maintained, tested and certificated.
• Provide a competent driver.
CONTRACT LIFT (Fully Contracted)
THE EMPLOYING ORGANISATION SHOULD SPECIFY:
• That all work is to be undertaken in accordance with BS7121.
• That the contractor is to supply the “Appointed Person”.
• What information and/or services will be provided to the contractor by the employing organisation.
THE CONTRACTOR IS RESPONSIBLE FOR:
• Supplying the “Appointed person”
• Planning the lift, and operation of a safe system of work (via method statement).
• Organisation and control of the lifting operation.
KING LIFTING
www.kinglifting.co.uk
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
MANAGEMENT & SUPERVISION FORSAFE LIFTING OPERATIONSMANAGEMENT & SUPERVISION FOR SAFE LIFTING OPERATIONS
Know your Lift Team Appointed Person, Crane Supervisor, Crane Operator and Slinger/Signaller
Ensure that your Lift Team is Trained, competent and authorised
Know your Load Weight, dimensions, type, lift points, location before and after up/down, hot, cold, sharp edges
Know your crane Size, type, duties, outrigger settings and loadings, boom length, radius of work, area for erection
Ensure that your crane is Tested, examined, inspected, fit for purpose
Know your ground Access, egress, level, sloping, excavations, condition, load bearing
Know your proximity hazards Electrical structures, stacked goods, pedestrians, overhead racks and trays
Know the weather Wind, rain, ice and snow, fog, sun, thunderstorms
Permit to work Safe System of Work (Method Statement)
Remember-all lifting operations must be;
“Properly Planned, Appropriately Supervised and Carried out Safely”(Lifting Operations and Lifting Equipment Regulations 1998 Regulation 8)
1. APPOINTED PERSON
The role of the Appointed Person, as defined by BS7121 part 1, is to provide a safe system of work for all lifting operations which are properly planned and adequately supervised. This includes the preparation of a comprehensive risk assessment and an adequate method statement. As well as selecting the correct crane for the lift the Appointed person must also select the appropriate load handling accessories (chains, slings, webs etc.), the method of attaching the load to the crane (the slinging technique) and calculate the down rating of the accessories where necessary to ensure a safe operation.
2. CRANE SUPERVISOR
The crane supervisor should direct and supervise the lifting operation, ensuring that these are carried out in accordance with the method statement. The crane supervisor should be competent and suitably trained and should have sufficient authority to stop the lifting operation if the supervisor considers it dangerous to proceed. NOTE: The appointed person may decide to undertake the duties of the crane supervisor or to delegate these to another person with appropriate expertise for the lifting operation.
KING LIFTING
www.kinglifting.co.uk
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
MANAGEMENT & SUPERVISION FORSAFE LIFTING OPERATIONS3. CRANE OPERATOR
The crane operator should be responsible for correct operation of the crane in accordance with the manufacturer’s instructions and within the safe system of work. The crane driver should only respond to a signal from the slinger to carry put initial lifting of the load, and then only to signals from one slinger/signaller, who should be easily identified, during the remainder of the lifting operation.
WARNING: It is essential that the crane driver does not tamper with any controls, mechanisms or other equipment, including the rated capacity indicator.
The crane operator should be:
• Trained on the specific model of crane used; • Able to assimilate and apply information contained in reports and duty charts relating to the range of duties and safe use of the crane; • Familiar with the manufacturer’s instructions for the rigging operation and for maintenance of the crane; • Aware that the crane should be used on level ground or else set level on outriggers before any load is applied; • Fully conversant with the correct use of outriggers and where outriggers should be fitted, and aware of how to properly support the outrigger feet (this requires regular monitoring to ensure that no movement occurs throughout the operation); • Able to set and check the functioning of the rated capacity limiter and rated capacity indicator; • Aware of the effects of wind and other climactic effects on the crane and load; • Able to resist pressures from other persons to carry out unsafe operations; • Able to take the action to avoid dangerous situations, including stopping operations; • Able to operate fire suppressant equipment, if fitted.
KING LIFTING
www.kinglifting.co.uk
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
MANAGEMENT & SUPERVISION FORSAFE LIFTING OPERATIONS4. SIGNALLER
The signaller should be responsible for relaying the signal from the slinger to the crane driver. The signaller may be responsible for directing movement of the crane and load instead of the slinger, provided that only one person is responsible at any time.
During the lifting operation, hand signals and voice instructions to the crane driver should be given by only one person at a time. If, during the lifting operation, responsibility for directing the crane and load is transferred to another signaller, the first signaller should clearly indicate to the crane driver that this responsibility is transferred and to whom. The first signaller should clearly indicate to the second signaller that the transfer is taking place. The crane driver and the second signaller should clearly indicate that they accept the transfer.
NOTE: It is common practice to train personnel to enable them to carry out duties of both slinger and signaller.
5. SLINGER
The slinger should be responsible for attaching and detaching the load to and from the crane load lifting attachment, and for using the correct lifting accessories and equipment in accordance with the operation plan.
The slinger should direct initial movement of the crane. If there is more than one slinger, only one slinger should direct initial movement.
If continuous signalling is required and the slinger is not visible to the crane driver, another slinger or signaller should relay the signals to the crane driver.
NOTE: Alternatively, other audio or visual methods may be used. If other audio or visual methods are used, the equipment or means of equipment use should be so that the crane driver can become immediately aware if equipment fails, so that movement of the crane can be stopped.
The following indications of equipment failure should cause the crane driver to immediately stop movements of the crane:
• Blank screen on a television monitor; • Cessation of continuous instructions from a signaller using radio, to e.g. “lower...lower...lower” etc;
NOTE: If radio is used as means of signalling, then selected personnel involved should be kept clear of other communications. All personnel involved in signalling should be given a clear and unique call sign and all communications should be preceded by the call sign. The crane driver should not respond to signals not preceded by the call sign.
KING LIFTING
www.kinglifting.co.uk
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
ASSESSING GROUND CONDITIONSDETERMINING PERMISSIBLE GROUND LOADINGS
RESPONSIBILITY
The Appointed Person is responsible for ensuring the ground conditions are suitable to set up and operate the crane, and therefore safely carry out the lifting operation.
In most cases the Appointed Person’s role has 3 stages:
• Ensure that accurate data is obtained in respect of the imposed loadings. • Ensure that this data had been assessed by a suitably competent person, such that suitable support systems have been specified. • Ensure that the specified system of support has been correctly installed and maintained.
SOURCES OF INFORMATION
• Under the Construction (Design and Management) Regulations, the client and the designer have a duty to make available to the Planning Supervisor information relating to the site. • If this is not available the ground conditions should be assessed by a suitably competent engineer, who may have top be a specialist Geotechnical Engineer. • In extreme cases physical load tests may have to be carried out in advance of the lifting operation, to verify the load bearing capability of the ground.
METHODS OF DISTRIBUTING LOADS
The standard outrigger support equipment carried by most crane suppliers has been proven by experience to provide effective load distribution in the majority of cases.
However, in certain situations additional load distribution is required to achieve acceptable ground bearing pressures.
KING LIFTING
www.kinglifting.co.uk
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
ASSESSING GROUND CONDITIONSPERMISSIBLE GROUND PRESSURES (SOURCE: DIN 1054)
t/m2
Backfilled Ground, not compacted 0 to 10.0
Mud, Peat, Marsh 0
Non-Cohesive Ground - medium to fine gravel 15 - course sand gravel 20
Cohesive Ground - mushy 0 - soft 4.0 - firm 10.0 - semi solid 20.0 - hard 40.0Rock 150.0 to 300.0
KING LIFTING
www.kinglifting.co.uk
KING LIFTING
www.kinglifting.co.uk
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
ASSESSING GROUND CONDITIONSDETERMINING GROUND CONDITIONS
In order to determine the support arrangements required for a crane, it will be necessary togather some information about the ground conditions on site.
It will be necessary to know:
• The character of the ground • The water conditions • The engineering properties of the ground relevant to the design of the foundations • The location of any underground hazards
SITE CATEGORIES
Sites can be categorised to highlight the most likely potential problems that need to be considered. More attention is required to establish the strength of the ground where ground conditions are poor or where there is lack of data on the nature of the sub-soil.
BEACHES
• Low sand density and/or high/variable water table create difficult conditions.
FILLED CONSTRUCTION SITES (BROWNFIELD)
• Unknown previous conditions, e.g. basements, poorly filled open pits, storage tanks, variable and compacted fill.
PAVED AREAS
• These can look deceptively strong but may have been laid on week ground underneath. • If a road is used regularly by heavy commercial vehicles and shows no sign of distress then it will be less of a concern than a lightly trafficked car park or estate road. • Footpaths always demand further investigations Edges of paved areas are usually weak as there may be weaker material or shallow services underneath thin surfacing.
TOWN CENTRE AREAS/SITES
Expect underground hazards e.g. basements, sewers, tunnels, live services, poorly back filled trenches, manholes, inspection chambers etc.
Rule of thumb: A rule of thumb to check for settlement of support area, raise the boom to minimum radius and slew 360o and pause momentarily over each outrigger. Any settlement will require a larger support base or ground improvement.
NOTE: Crane Operators are not, nor are they meant to be Geotechnical Engineers. On many sites an operators experience and expertise will determine a safe crane set up. However if doubt exists the Appointed Person must be contacted or a suitable engineer to determine the continuing suitability of any ground.
KING LIFTING
www.kinglifting.co.uk
KING LIFTING
www.kinglifting.co.uk
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
ASSESSING GROUND CONDITIONSFACTORS OF SAFETY (FOS)
The following charts give foundation areas for a range of Factors of Safety against bearing failure and excessive settlement of the ground.
FOS of 3.0 is more normally used for permanent work foundations and will give a conservative size of foundation area. It should be used for outrigger foundations where minimum ground information is available, where soils are variable or where minor settlements could be critical to a precision lifting and placing operation.
FOS of 2.0 is adequate for most situations.
FOS of 1.5 is the absolute minimum and should only be used where ground conditions have been accurately identified under the guidance of an experienced geotechnical engineer.
OUTRIGGER FOUNDATION AREAS
GRANULAR SOILS
• If only general information on the soil type is available use the upper limit of the bands shown. • Where groundwater is at a depth B or less below the level of the foundation, or the site is liable to flooding, then the above foundation areas should be doubled. (B is the width of the foundation).
KING LIFTING
www.kinglifting.co.uk
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
ASSESSING GROUND CONDITIONSOUTRIGGER FOUNDATION AREAS
COHESIVE SOILS
• If only genral information on the soil type is available use the uppoer limit of the bands shown.
• If the site is liable to flooding, then the above foundation areas should be increased by 50%
• If the foundation is NOT approximately square in plan, but is rectangular then the above foundation areas should be increased by 10% (B/L should not exceed 0.5 where B is the width of the foundation and L is the length of foundation.
KING LIFTING
www.kinglifting.co.uk
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
ASSESSING GROUND CONDITIONSMAT FOR MOBILE CRANE OUTRIGGER DATA
CRANE: 30 tonne capacity truck-mounted mobile.SIZE OF OUTRIGGER PADS: 400 x 400mmMAXIMUM OUTRIGGER LOAD: Take 33 tonnes-i.e. approx 330 kNGROUND: Dense to very dense sandy gravel
EXAMPLE
REQUIRED SIZE OF MAT
Using factor of safety = 2, and ø = 40˚, area of mat required + 0.9m2.
For granular soil, this area can be square or rectangular; try 3 no. sleepers wide x 1200mm long i.e 750mm x 1200mm i.e area = 0.75 x 1.2 = 0.9m2.
KING LIFTING
www.kinglifting.co.uk
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
ASSESSING GROUND CONDITIONSCALCULATION OF AREA OF RECTANGULAR/SQUARE MAT
Area of Mat = Length x Width
EXAMPLE: A crane outrigger mat measures 2.4m in length x 1.2m in width Area of mat is 2.4 x 1.2 = 2.88m2
CALCULATION OF AREA OF CIRCULAR MAT
Area of Mat = π X R2
π = 3.14 R2 = R X R
EXAMPLE: Mat Diameter is 0.9m Radius = 0.9m/2 = 0.45m R2 = 0.45 x 0.45 = 0.21 Area of Mat is 3.14 x 0.21 = 0.66m2
KING LIFTING
www.kinglifting.co.uk
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
ASSESSING GROUND CONDITIONS45˚ OUTRIGGER LOAD - SIMPLE EXPLANATION
When two lower mats (a) are placed side by side, the upper mat (b) that covers the lower mats must extend beyond the centre line.
KING LIFTING
www.kinglifting.co.uk
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
ASSESSING GROUND CONDITIONS
The guidelines given above apply both to work adjacent to permanent structures and to work near to temporary works, e.g. sheet pile retaining walls, trench support systems, etc.
FINAL SITING CHECKS
Even when mats have been correctly dimensioned, care must be exercised so that outriggers or tracks avoid dangerous positions.
The following figure gives guidelines for positioning so that stability is not compromised. If a crane operator or lift supervisor find themselves needing to set up within the “Danger Areas” further engineering consideration must be given to the problem before moving the crane into these areas.
If you are in a “Danger Area” do not lift without an engineering assessment being made by a competent engineer. These areas apply to crawler cranes, lorry mounted telescopic cranes or any other heavy plant.
KING LIFTING
www.kinglifting.co.uk
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
SELECTING AND SAFE USE OF LIFTING ACCESSORIES ALWAYS
• Plan the lift, establish the weight of the load and prepare the landing area ensuring that it will take the weight. • Check slings and equipment are free of damage, use slings/slinging method suitable for the load and protect slings from sharp edges and corners. • Attach the slings securely to the load and appliance and position hook to face outwards. • Keep fingers and toes etc clear when tensioning slings and when landing loads. • Ensure the load to be lifted is free. • Make a trial lift and trial lower.
NEVER
• Use damaged slings or accessories. • Twist or knot a sling. • Hammer slings into position. • Overload slings due to the weight of the load or mode of use. • Trap slings when landing the load. • Drag slings over floors etc, or attempt to pull trapped slings from under loads. • Allow personal to ride on loads.
SLING CONFIGURATION AND RATING
Slings are available in single, two, three and four leg or endless form. In practice it will be found that chain, wire rope and fibre rope slings are available in any of these configurations but the flat woven sling is limited to single leg and endless, whilst the roundsling is supplied in endless form.
The maximum load that the sling may lift in use is governed by the slinging arrangement (mode of use) and may vary from the marked SWL. In the case of textile slings the SWL for the various modes of use is usually given on the information label. In other cases it will be necessary to multiply the marked SWL by a mode factor. The following three simple rules will ensure that the sling is not overloaded. In some cases this will mean that the sling is under utilized although this is unlikely to hinder the user unduly. Where the maximum utilization is required reference should be made to a competent person who understands the factors involved and who can perform the necessary calculations.
1. For a straight lift never exceed the marked SWL and in cases of multi-leg slings the specified angle or range of angles.
2. When using slings in a choke hitch, multiply the maximum SWL by 0.8 to obtain the reduced maximum SWL the sling may lift.
3. With multi leg slings when using less than the full number of legs, reduce the maximum load in proportion to the number of legs in use. Simply multiply the marked SWL by the number of legs in use expressed as a fraction of the total, thus
• 1 leg of a two leg sling in used = 1/2 marked SWL • 3 legs of a four leg sling being used = 3/4 marked SWL and so on.
KING LIFTING
www.kinglifting.co.uk
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
SELECTING AND SAFE USE OF LIFTING ACCESSORIES OPERATIVE TRAINING
Trained operatives who understand the methods of rating and application of mode factors should only use slings.
SAFE USE OF SLINGS
Good slinging practice must ensure that the load is a safe and secure in the air as it was on the ground, and that no harm is done to the load, lifting equipment, other property or persons.
Establish the weight of the load and ensure the lifting method is suitable and inspect the sling and attachments for obvious defects. Prepare the landing area making sure the floor is strong enough to take the load, follow any specific instructions from the supplier.
Ensure the lifting point is over the centre of gravity of the load, any loose part of the load should be removed or secured.
Secure the sling firmly to the load by hooks onto lifting points or shackles etc. The sling must not be twisted, knotted or kinked in any way. Use packing to prevent damage to the sling from corners or edges and to protect the load.
A GENERAL PURPOSE SLINGING PRACTICE
Do not exceed the SWL or rated angle, any choke angle must not exceed 120˚ and any basket angle must not exceed 90˚.
Do not force, hammer or wedge slings or accessories into position, they just fit freely.
When attaching more than one sling to a hook of an appliance use a shackle to join the slings and avoid overcrowding of the hook.
Use an established code of signals to instruct the crane operator, ensure that the load is free to be lifted and not for example bolted down. Check that there are no overhead obstacles such as power lines. Where appropriate use a tag line to control the load. Except where special provision is made, do not allow anyone to [pass under or ride on the load, the area should always be kept clear.
Keep fingers and toes etc clear ensuring they do not become trapped when lifting or lowering or controlling loads.
Make a trial lift and set down, ensuring the sling will not become trapped. Use supports, which are strong enough to sustain the load.
Never drag slings over floors etc, or attempt to drag a load. Place the hooks of free legs onto the master link and take care to ensure that empty hooks do not become accidentally engaged.
Never use slings, which may become in contact with chemicals or hat without the manufacturers approval. Never use damaged or contaminated slings.
On completion of the lift return all equipment to proper storage.
This information is of a general nature and should always be read in conjunction with manufacturers instructions.
KING LIFTING
www.kinglifting.co.uk
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
SELECTING AND SAFE USE OF LIFTING ACCESSORIES LIFTING ACCESSORIES
The following pages contain examples of test certificates for accessories, in addition to an example of a 6 month thorough examination reports. Also included are simple formulas to enable an appointed person to calculate the correct minimum SWL for various types of lifting accessories in general use, which, together with various charts will form a useful reference for an appointed person.
CHAIN SLINGS
WIRE ROPE SLINGS
POLYESTER SLINGS
D AND BOW SHACKLES
LIFTING BEAMS
KING LIFTING
www.kinglifting.co.uk
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
SELECTING AND SAFE USE OF LIFTING ACCESSORIES DISTANCE BETWEEN LIFTING POINTS AFFECTS THE SLINGS ANGLES
30O
Half leg length = 30o
60O
Equal to leg length = 60o
90O
1.4 times the leg length = 90o
Maximum recommended included angle
120O
One & two thirds times leg length = 120o
For special application only
KING LIFTING
www.kinglifting.co.uk
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
SELECTING AND SAFE USE OF LIFTING ACCESSORIES SLING ANGLES
When lifting with multi-legs slings, they are rated at a certain tonnage from 0O to 90O and this SWL should NOT be exceeded even if the angle is less than 90O. When using single slings in pairs however, you must always be aware of the increased loadings in the slings when lifting at an angle.
0.5 TONNEeach Sling
0.53 TONNEeach Sling
0.58 TONNEeach Sling
0.7 TONNEeach Sling
1.0 TONNEeach Sling
6.0 TONNEeach Sling
KING LIFTING
www.kinglifting.co.uk
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
SELECTING AND SAFE USE OF LIFTING ACCESSORIES SAFE WORKING LOADS - (SINGLE ACCESSORIES)
Single chain slings, wire ropes and shackles have all been given a S.W.L. for use in a vertical application.
When using single accessories inclined to each other, the maximum included angle of 90 degrees (alpha angle) or 45 degrees beta angle should not be exceeded.
To allow for the increasing leg tension (stress/force) we as users are required to obtain a revised S.W.L.
For inclined lifting using single items, (gear/tackle) - the following uniform load method should be used.
The S.W.L. for 2 vertically rated accessories to be used for inclined loading can be calculated by using the following simple formula.
The factor of 1.4 x the S.W.L. of 1 accessory will give the total load that may be lifted by the 2 accessories together, as a pair.
• EG: 2 No 5 tonne S.W.L. Wire rope slings used at a 90O included angle have a combined lifting capacity of :- • 1.4 x 5 = 7 TONNES
The S.W.L. of 3 or more vertically rated single accessories to be used at inclined loadings, will be calculated using the same method as above except for using a factor of 2.1.
• EG: 4 No 5 S.W.L. Tonne shackles used at a 90O included angle have a combined lifting capacity of :- • 2.1 x 5 = 10.5 Tonnes
The factor of 2.1 x the S.W.L. of 1 accessory will give the total load that may be lifted by the 3 or 4 accessories together, AS A SET.
KING LIFTING
www.kinglifting.co.uk
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
SELECTING AND SAFE USE OF LIFTING ACCESSORIES DETERMINING THE SWL OF VERTICALLY RATED SINGLE ACCESSORIES, WHERE THE WEIGHT OF THE LOAD IS KNOWN FOR INCLINED LOADINGS :- (INCLINED ALPHA AND BETA ANGLE)
Using the following straightforward calculations it is easy to determine the MINIMUM correct S.W.L. of the accessories.
2 Point lift using SINGLE accessories. 71% of load weight will give the MINIMUM S.W.L. of each accessory.
EG: Load weight 10 tonnes therefore :- 71% of load = 71% of 10 Tonnes = 7.1 TONNES
To lift a 10 Tonne load on 2 single accessories, the S.W.L. of each accessory must not be less than 7.1 TONNES
3 and 4 point lifting using single accessories.50% of load weight will give the minimum S.W.L. of each accessory
EG: Load weight 20 Tonnes therefore :- 50% of load = 50% of 20 Tonnes = 10 TONNES
To lift a 20 Tonne load on 3 or 4 single accessories the S.W.L. of each accessory must not be less than 10 Tonnes.
KING LIFTING
www.kinglifting.co.uk
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
SELECTING AND SAFE USE OF LIFTING ACCESSORIES WORKING LOAD LIMITSThe Working Load Limits (WLL) listed in the tables below are the maximum weights which slings are designed to sustain in general lifting service, according to the standard uniform load method of rating. In exceptionally hazardous conditions, or in any other circumstances which might indicate a need for a WLL lower than the designed figure, the degree of hazard should be assessed by a competent person and the working load limit adjusted accordingly. The WLL, which should be marked on the sling itself or on a securely fixed metal tag, must not be exceeded in any circumstances. ALL CAPACITIES ARE IN TONNES.
KING LIFTING
www.kinglifting.co.uk
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
CALCULATION OF THE LOADEXAMPLE OF HOW TO CALCULATE THE PERCENTAGE OF CAPACITY USEDNote: The reduction for fly does not apply to all Cranes - please consult Spec Book to confirm.
TYPICAL EXAMPLE
CRANE CAPACITY DETAILS
Maximum Radius 24.0 metres Weight of Load 20.0 tonnes Slings/Shackles 0.6 tonnes Lifting Beam 0.5 tonnes Load Reduction for Fly 0.4 tonnes Hock Block 1.8 tonnes Total Load 23.3 tonnes Capacity 25.5 tonnes
% of Capacity used 91.3
TYPICAL EXAMPLE
CRANE CAPACITY DETAILS FOR MAN BASKET
Man Basket 0.5 tonnes Personnel - 2 No. 0.3 tonnes Slings/Shackles 0.2 tonnes Lifting Beam 0.5 tonnes Load Reduction for Fly 1.3 tonnes Hock Block 2.8 tonnes Total Load 2.8 tonnes 100% Contingency 2.8 tonnes Revised Load 5.6 tonnes Capacity 6.0 tonnes
% of Capacity used 93.3
KING LIFTING
www.kinglifting.co.uk
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
CALCULATION OF THE LOADESTIMATED WEIGHTS OF VARIOUS LOADS
MATERIAL TYPE WEIGHT in kg/m3
Oil 800
Magnesium 1750
Concrete 2440
Brickwork 2000
Water 1000
Steel 7700
Cast Iron 7200
Aluminium 2700
Earth 1600
Paper 1120
Copper 8800
Lead 11200
Soft Wood 600
Hard Wood 800
Greenheart 1200
1000kgs = 1 Tonne 2240lbs = 1 Ton
NOTE: The figures above represent an average weight which have been rounded for ease of use. Figures may possibly change due to water content and composition.
KING LIFTING
www.kinglifting.co.uk
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
LIFTING PERSONNELMAN BASKET
Carriers should not be used in the following conditions:
• Winds exceeding 7m/s (15.6mph); • Electrical storms; • Snow or ice; • Fog; • Sleet; or • Other weather conditions that could affect the safety of personnel.
Unintentional rotation of the carrier should be prevented (e.g. by using guide ropes or anchoring). The means of preventing unintentional rotation should not inhibit any emergency procedures and should not otherwise interfere with safe operation of the carrier.
Carriers should not be occupied while the crane is travelling.
Lifts should not be made on any other hoist lines of the crane while any person occupies a carrier attached to the crane.
The crane, load lifting attachments and carrier should be inspected every day during use.
CAPACITY
The crane selected to lift the carrier should have a rated capacity on the fixed load lifting attachment of at least twice the minimum rated capacity of the crane configuration in use.
KING LIFTING
www.kinglifting.co.uk
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
CRANES WORKING NEAR AERODROMESA GUIDE TO SAFE OPERATION OF CRANES IN THE VICINITY OF AERODROMES
• Aviation law, in particular The Air Navigation Order, makes it an offence to act recklessly or negligently in a manner likely to endanger aircraft. BS 7121 Safe Use of Cranes places a duty on all operators of cranes and other lifting equipment tom comply with procedures when intending to work in the vicinity of aerodromes.
• The Appointed Person should consult the Aerodrome Manager for permission to work if a crane is to be used within 6Kms of the Aerodrome measured from its perimeter, and if its height exceeds 10m above ground level or that of the surrounding structures, trees etc.
• The term “Aerodrome” includes Airports, Airfields and Heliports where aircraft and helicopters land and take off. The unauthorised operation of cranes and other high lifting equipment in the vicinity of such places could present a serious hazard to aircraft and helicopters either as a physical obstruction or by interfering with electronic precision guidance equipment.
• The risk to pilots and aircrew who are unaware of such equipment when flying could result in an aircraft or helicopter colliding with such equipment resulting in an accident.
• The developer or crane operator should approach the Aerodrome concerned at least one month in advance of requiring the use a crane or other tall construction equipment to find out if there are any limitations and regulatory procedures that must be agreed upon before work commences.
• At least three days prior to delivery of the crane the operator must report to the Aerodrome with precise details of the crane or lifting equipment to be used on site and applies for the permit to set up and use the specified equipment. Information must be provided on the type of crane that is to be used Tower or Mobile, the length and radius of operation of the boom, the area of operation along with intended times and dates of operations, applicants name and contact details for the crane when operating.
• The permit will set out the criteria and any specific restrictions. A copy of the permit must remain with the crane operator for the duration of the lifting operation and must be produced if requested by an Aerodrome, CAA official or a Police Officer.
• Once these details have been considered it will be determined as to whether the operation can proceed, any of the following conditions may be imposed.
• The fitting of red obstacle lights normally they will be steady red lights of either 200 or 2000 candelas depending on height and visible throughout 360 degrees.
• Restrictions on crane operating times.
• Crane operations dependant on the runways in use.
• Restrictions on crane operating height.
• Restrictions during periods of poor visibility, this may require the boom to be lowered or positioned in a particular direction.
KING LIFTING
www.kinglifting.co.uk
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
CRANE WORKING IN THE VICINITY OF OVERHEAD POWER LINES ELECTRIC LINES - GUIDANCE NOTES
WARNING: All overhead lines and other electrical apparatus should be treated as live unless declared “dead” and “safe” by the line operator. If in doubt, seek advice from your operations manager.
If the crane makes contact with live electric line or cable, observe the following precautions: Ref: BS 7121 Safe Use of Cranes:-
• Remains inside cab. • Warn all other personnel to keep away from the crane and not to touch any part of the crane, rope or load. • Try, unaided, and without anyone approaching the machine, to move the crane until it is clear of the power line or cable. • If the machine cannot be moved away, remain inside the cab. If possible, get someone to inform the electricity supply authority at once. Take no action until it has been confirmed that the conditions are safe. • If it essential to leave the cab because of fire or some other reason, jump clear as far away from the crane as possible. Do not touch the crane and the ground at the same time. • Inform the responsible engineer of the works or authority concerned of the situation immediately, and until assistance is received someone should remain near the crane to warn of the danger.
HEALTH AND SAFETY AT WORK ETC. ACT 1974
SECTION 7: It shall be the duty of every employee while at work - to take reasonable care for the health and safety of himself and of other persons who may be affected by his acts or omissions at work.
KING LIFTING
www.kinglifting.co.uk
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
WIND SPEEDBEAUFORT SCALE - WIND VELOCITY TABLE
This chart is intended as a general guide only - all conversion calculations are rounded to the nearest whole number. Accurate details relating to working conditions for individual Cranes must be obtained by reference to Crane Specification Manuals or other bulletins issued by the Manufacturer of the crane concerned. Please note-stricter wind speed tolerances apply to cranes of over 200 tonnes lifting capacity.
Note: As a general guide most Cranes working on Main Boom operate to 9.8 m/s. For cranes working on Fly Jib and Luffing Fly Jib, this figure is greatly reduced. For further information contact the Technical Department.
KING LIFTING
www.kinglifting.co.uk
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
RECOGNISED CRANE HAND SIGNALS
KING LIFTING
www.kinglifting.co.uk
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
GUIDANCE NOTESPlease take note of the following guidelines which will assist in the assessment of suitable cranage for various lifting applications.It is important that all relevant load reductions are applied.
LOAD CHART REDUCTIONS
• At all times the weight of the hookblock and all other load handling accessories is considered part of the load and suitable allowance for them should be made. • Where a crane has twin hoist facility two hookblocks may be fitted. An allowance for
the combined weight of the hookblocks should be made. • Where a crane carries a fly jib stowed on the main boom (underslung or side mounted) the safe working load should be reduced to allow for the additional weight. The relevant load reductions are included in the specification guide. This is not the case however with cranes manufactured by Jones, Tadano and Kato, where the safe working load has been calculated with the fly jib carried in the stowed position. • When using the main boom with any form or fly jib installed an allowance for both the fly jib and hookblock should be added to the weight of the load, please contact your nearest depot for further guidance.
LIFTING HEIGHT CHART
• A generic lifting height chart has been including to assist with the assesment of boom required for the lifting operation (see next page).
KING LIFTING
www.kinglifting.co.uk
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
LIFTING HEIGHT CHART
KING LIFTING
KING LIFTING LIMITEDHEAD OFFICE: King Road Avenue Avonmouth Bristol BS11 9HFTel: 01179 821121 Fax: 01179 826244 Web: www.kinglifting.co.uk DEPOTS ACROSS THE UK
'BIG ENOUGH TO COPE, SMALL ENOUGH TO CARE'
CRANE HIREKing Lifting operate a modern fleet of over 100 All Terrain and Tower and Crawler cranes with capacities from 8 tonnes upwards.
All our machines are operated by CPCS qualified and competent personnel, ensuring our ability to tackle all types of lifting, regardless of restricted accesss or stringent timetable.
If your orgainisation does not have expertise in lifting operations you should consider a Contract Lift. Further information is given in Contract Lifting.
Modern All Terrain/City Class fl eet
8-500t capacities
Lift consultancy facilities
Full 3D CAD facilities
Road traffi c management
Spreader beams, mats and trackway
Mobile and self erecting tower cranes
Mini crawler and compact cranes
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
KING LIFTING
KING LIFTING LIMITEDHEAD OFFICE: King Road Avenue Avonmouth Bristol BS11 9HFTel: 01179 821121 Fax: 01179 826244 Web: www.kinglifting.co.uk DEPOTS ACROSS THE UK
'BIG ENOUGH TO COPE, SMALL ENOUGH TO CARE'
CONTRACT LIFTINGContract Lifting enables you to reduce risk by contracting out the planning and supervision of the lifting operation.
King Lifting provide a full Contract Lifting service, which relieves you of the responsibility of preparing a method statement, risk assessment and managing and supervising the lifting operation ensuring that the whole operations complies fully with BS7121.
When you request a Contract Lift, King Lifting will provide you with a written quotation covering all the planning, management, craneage and our standard insurance (details available on request). We will then provide a method statement, liftplan (with full 3D CAD imaging available), craneage and operators, lifting equipment and an Appointed Person to assume responsibility for the mandatoryon-site requirements.
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne8
Tonn
e
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TADANO TS 75M/LDIMENSIONS
Outrigger fully extended are 4.4m wide
NOTES
• Total rated loads shown in the table are based on the condition that the crane is set on firm ground horizontally. Those above bold lines are based on the crane strength and those below on its stability.
• Total rated loads below the bold lines do not exceed 75% of tipping load. • Each total rated loads includes weight of the hooks (65kg for 8 ton capacity, 20kg for 1.3 ton capacity), and slings. • 50kg shall be subtracted from the rated lifting loads of the main boom, when single top is attached to main boom head. • Standard number of part lines for each boom length is as shown below. Load per line should not surpass 1,230kg for main winch and 1,300kg for auxiliary winch.
*This is the case in which the single top is made into use together with the main hoist reeving system
• For total rated load of songle top, reduce load shown in the following table from the relevent total rated load. Total rated loads of single top should not exceed 1,300kg.
Boom length (m) 6,6m 11,5m 16,4m 21,3m Single top
No. of part lines 7*/6 4 4 4 1
Vehicle weight 9,560kg
Overall width 2,230*mm
Tail swing radius 1,600 mm
*These dimensions are shown as an examplewhen mounted on DAF carrier model FA1000.
Boom Length 6,6m 11,5m 16,4m 21,3m
Reductions 0kg 30kg 40kg 50kg
Capacity 8te 1,3te
Weight 65kg 20kg
HOOKBLOCK
LOAD REDUCTIONS
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne8
Tonn
e
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TADANO TS 75M/LTOTAL RATED LOADS
DIN 15019.2 2-75%
WORKING AREA DIAGRAM
OUTRIGGERS FULLY EXTENDED
Front jack* extended (360o) Front jack* not extended Front jack* not extended (Over sides and rear) (Over sides and rear)
2,3m 8,000 8,000
2,5m 7,000 7,000
3,0m 6,100 4,900 5,200 4,900
3,5m 5,300 4,600 3,500 3,800 3,900 3,500
4,0m 4,350 4,300 3,200 2,700 2,800 2,800
4,5m 3,600 3,700 3,000 2,000 1,900 2,100 2,100 2,000
5,0m 3,000 3,100 2,800 2,000 1,500 1,600 1,600 1,700
5,5m 2,550 2,650 2,600 1,850 1,200 1,300 1,300 1,350
6,0m 2,250 2,350 2,400 1,700 900 1,050 1,050 1,100
7,0m 1,800 1,850 1,450 750 750 800
8,0m 1,450 1,500 1,250 500 500 550
9,0m 1,200 1,250 1,100 350 350 400
10,0m 1,000 1,050 950 250 250 300
10,9m 850 850 850 150 150 200
12,0m 700 750
13,0m 600 650
14,0m 500 550
15,0m 400 450
15,8m 350 400
17,0m 350
18,0m 280
19,0m 230
20,0m 180
20,5m 150
6,6m 11,5m 16,4m 21,3m 6,6m 11,5m 16,4m 21,3m B A
Unit - Kg
A - Boom Length B - Working radius
*Optional
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne25
To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
KATO CR-250 (CITY CRANE) DIMENSIONS
HOOKBLOCK
Vehicle weight 25,140kg Capacity 22te 4te
Weight 200kg 60kg
R1 = 8.30m (Minimum turning radius)R2 = 8.49m (Turning radius of extremely outer tire)R3 = 9.25m (Chassis turning radius)R4 = 9.93m (Boom end turning radius)
A = 4.85m (Width of entrance)B = 4.13m (Width of wheel exit)C = 4.89m (Width of chassis exit)D = 5.56m (Width of exit at end of boom)
R1 = 5.00m (Minimum turning radius)R2 = 5.19m (Turning radius of extremely outer tire)R3 = 5.95m (Chassis turning radius)R4 = 6.77m (Boom end turning radius)
A0 = 4.16m (Width of entrance)A1 = 3.48m (Width of wheel entrance)B = 3.44m (Width of wheel exit)C = 4.20m (Width of chassis exit)D = 5.02m (Width of exit at end of boom)
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne25
To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
KATO CR-250 (CITY CRANE)MAIN BOOM DUTIES
Outriggers fully extended (6.0m) Outriggers intermediately extended (4.5m) Outriggers completely retractedWorking 360° full range 360° full range (Blocked on vertical cylinders) – 360° full rangeRadius 6,7m 11,0 15,2 21,6 28,0 6,7m 11,0 15,2 21,6 28,0 6,7m 11,0 15,2 21,6 28,0(m) Boom Boom Boom Boom Boom Boom Boom Boom Boom Boom Boom Boom Boom Boom Bom2,8 25,00 12,00 12,00 25,00 12,00 12,00 10,00 9,50 7,903,0 22,00 12,00 12,00 8,00 22,00 12,00 12,00 8,00 8,75 8,45 7,15 6,503,5 20,00 12,00 12,00 8,00 20,00 12,00 12,00 8,00 6,60 6,30 5,65 5,454,0 17,00 12,00 12,00 8,00 6,50 17,00 12,00 12,00 8,00 6,50 5,10 4,85 4,55 4,55 4,254,5 15,00 12,00 12,00 8,00 6,50 15,00 12,00 12,00 8,00 6,50 4,10 3,85 3,70 3,80 3,655,0 12,00 12,00 8,00 6,50 12,00 12,00 8,00 6,50 3,10 3,00 3,20 3,155,5 12,00 12,00 8,00 6,50 9,80 9,70 8,00 6,50 2,50 2,40 2,70 2,706,0 12,00 11,50 8,00 6,50 8,20 8,10 8,00 6,50 2,05 1,95 2,30 2,356,5 11,30 10,60 8,00 6,50 7,00 6,85 7,25 6,50 1,60 1,55 1,95 2,007,0 10,15 9,90 7,85 6,50 6,00 5,95 6,55 6,50 1,25 1,20 1,65 1,758,0 7,90 7,80 7,10 5,90 4,60 4,50 5,10 5,40 0,70 0,60 1,15 1,309,0 6,20 6,10 6,35 5,35 3,60 3,45 4,05 4,4010,0 4,90 5,45 4,80 2,65 3,30 3,6011,0 4,00 4,60 4,30 2,05 2,65 3,0012,0 3,25 3,85 3,85 1,55 2,15 2,5013,0 3,65 3,30 3,50 1,15 1,75 2,1014,0 2,80 3,10 1,40 1,7515,0 2,35 2,70 1,15 1,4516,0 2,00 2,35 0,90 1,2017,0 1,70 2,00 0,70 0,9518,0 1,45 1,75 0,50 0,8019,0 1,20 1,50 0,35 0,6020,0 (19,7m) 1,05 1,30 0,4521,0 1,15 0,3522,0 0,9523,0 0,8024,0 0,7025,0 0,6026,0 0,50
Standard for 25 ton for 22 ton for 25 ton for 22 ton for 25 ton for 22 tonHook (optional) (optional) (optional)
Hook Mass 200kg 200kg 200kg 200kg 200kg 200kgParts of Line 7 4 7 4 7 4Critical – – – – – – – – – 35° – 20° 51° 62° 69°Boom Angle
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne25
To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
KATO CR-250 (CITY CRANE)FLY JIB DUTIES
28.0m Boom + 5.4m Jib(Standard hook for 4.0 ton - Hook mass 60kg)
Outriggers fully extended (6.0m) – 360° full range Offset 5° Offset 25° Offset 45°
Boom Working Load Working Load Working LoadAngle (°) Radius (m) (t) Radius (m) (t) Radius (m) (t)
81,0 5,2 3,00 7,0 2,50 8,3 1,55
77,7 7,2 3,00 8,9 2,50 10,0 1,55
75,0 8,9 3,00 10,4 2,30 11,4 1,50
73,0 10,0 3,00 11,5 2,14 12,4 1,46
70,0 11,7 2,60 13,1 1,94 13,9 1,42
65,0 14,3 2,15 15,7 1,69 16,3 1,35
60,0 16,8 1,83 18,1 1,49 18,7 1,30
55,0 19,2 1,55 20,3 1,35 20,8 1,25
54,0 19,6 1,45 20,7 1,32 21,2 1,22
52,0 20,4 1,29 21,5 1,19 22,0 1,18
50,0 21,2 1,14 22,3 1,05 22,7 1,08
48,0 22,0 1,01 23,0 0,94 23,3 0,99
45,0 23,2 0,82 24,1 0,77
40,0 25,0 0,58 25,8 0,54
35,0 26,6 0,40 27,2 0,38
Critical 33° 33° 46°Boom Angle
28.0m Boom + 5.4m Jib(Standard hook for 4.0 ton - Hook mass 60kg)
Outriggers intermediately extended (4.5m) – 360° full range
Offset 5° Offset 25° Offset 45°
Working Load Working Load Working Load Radius (m) (t) Radius (m) (t) Radius (m) (t)
81,0 5,2 3,00 7,0 2,50 8,3 1,55
77,7 7,2 3,00 8,9 2,50 10,0 1,55
75,0 8,9 3,00 10,4 2,30 11,4 1,50
73,0 10,0 3,00 11,5 2,14 12,4 1,46
70,0 11,7 2,60 13,1 1,94 13,9 1,42
69,0 12,2 2,50 13,6 1,88 14,4 1,40
67,0 13,2 2,14 14,7 1,77 15,3 1,37
64,0 14,7 1,63 16,0 1,46 16,8 1,33
60,0 16,6 1,14 17,9 1,02 18,5 1,00
55,0 18,9 0,70 19,9 0,67 20,7 0,60
50,0 21,0 0,39 21,9 0,37
48° 48° 53°
BoomAngle
(°)
CriticalBoom Angle
28.0m Boom + 8.2m Jib(Standard hook for 4.0 ton - Hook mass 60kg)
Outriggers fully extended (6.0m) – 360° full range Offset 5° Offset 25° Offset 45°
Boom Working Load Working Load Working LoadAngle (°) Radius (m) (t) Radius (m) (t) Radius (m) (t)
81,0 6,0 2,00 8,7 1,20 10,5 0,80
77,7 8,7 2,00 11,1 1,20 12,7 0,80
75,0 10,0 2,00 12,2 1,20 13,7 0,78
72,0 11,9 1,81 14,0 1,20 15,3 0,75
70,0 13,0 1,71 15,1 1,18 16,4 0,74
65,0 15,9 1,49 17,8 1,12 18,9 0,72
60,0 18,6 1,33 20,3 1,05 21,3 0,69
55,0 21,2 1,20 22,7 0,98 23,5 0,67
53,0 22,1 1,14 23,6 0,95 24,3 0,66
50,0 23,5 0,96 24,9 0,77 25,4 0,65
47,0 24,7 0,80 26,1 0,63 26,5 0,64
45,0 25,6 0,69 26,8 0,56
40,0 27,5 0,49 28,5 0,39
35,0 29,1 0,33
Critical 33° 38° 45°Boom Angle
28.0m Boom + 8.2m Jib(Standard hook for 4.0 ton - Hook mass 60kg)
Outriggers intermediately extended (4.5m) – 360° full range
Offset 5° Offset 25° Offset 45°
Working Load Working Load Working Load Radius (m) (t) Radius (m) (t) Radius (m) (t)
81,0 6,0 2,00 8,7 1,20 10,5 0,80
77,7 8,7 2,00 11,1 1,20 12,7 0,80
75,0 10,0 2,00 12,2 1,20 13,7 0,78
72,0 11,9 1,81 14,0 1,20 15,3 0,75
70,0 13,0 1,71 15,1 1,18 16,4 0,74
65,0 15,9 1,49 17,8 1,12 18,9 0,72
63,0 16,9 1,26 18,8 1,09 19,8 0,70
60,0 18,4 0,98 20,2 0,87 21,3 0,69
58,0 19,4 0,81 21,2 0,72 22,2 0,68
55,0 20,8 0,60 22,5 0,54 23,3 0,53
50,0 23,1 0,31
48° 53° 53°
BoomAngle
(°)
CriticalBoom Angle
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne25
To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
KATO CR-250 (CITY CRANE)FREE ON WHEELS DUTIES
PICK AND CARRY DUTIES
Stationary on rubber (without outriggers) 6.7m Boom 11.0m Boom 15.2m Boom
Working Over 360° Full Over 360° Full Over 360° FullRadius (m) Front Range Front Range Front Range
3,0 6,00 5,50 5,20
3,5 8,50 4,50 8,50 4,10 8,00 3,80
4,0 8,50 3,30 8,50 3,20 8,00 3,00
4,5 7,50 2,55 7,20 2,55 6,50 2,40
5,0 6,10 2,00 5,40 1,90
5,5 5,10 1,55 4,55 1,50
6,0 4,25 1,20 3,85 1,15
6,5 3,55 0,90 3,30 0,85
7,0 3,00 0,65 2,80
8,0 215 2,05
9,0 1,55 1,50
10,0 1,00
11,0 0,60
Standard Hook for 22 tonHook Mass 200kg
Parts of Line 6 4
Critical Boom – – – 30° 33° 57°Angle
Pick & Carry (less than 2km/h) (without outriggers)
6.7m Boom 11.0m Boom 15.2m BoomWorking Over 360° Full Over 360° Full Over 360° FullRadius (m) Front Range Front Range Front Range
3,0 4,80 4,40 4,00
3,5 6,80 3,60 6,40 3,30 5,90 3,00
4,0 6,80 2,65 6,40 2,55 5,90 2,40
4,5 6,00 2,05 5,50 2,05 5,00 1,90
5,0 4,75 1,50 4,30 1,40
5,5 4,10 1,05 3,65 1,00
6,0 3,40 0,65 3,10 0,60
6,5 2,85 2,65
7,0 2,40 2,25
8,0 1,65 1,60
9,0 1,00 1,00
10,0 0,50
11,0
Standard Hook for 22 ton
Hook Mass 200kg
Parts of Line 6 4
Critical Boom – – – 42° 35° 60°Angle
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne30
To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC30 (CITY CRANE)DIMENSIONS
HOOKBLOCK
LOAD REDUCTIONS
Vehicle weight 22,540kg
() with independent rear axle steering
Boom Length 7,5m 11,9m 16,3m 20,7m 25,0m
(Citycrane) Reductions 400kg 270kg 190kg 150kg 120kg
Capacity 25,3te 10te 3,3te
Weight 220kg 100kg 80kg
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne30
To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC30 (CITY CRANE)LIFTING CAPACITIES MAIN BOOM DUTIES
Radius (m)
5,95m x 5,90m — 360° Main Boom
7,5(ton)
11,9(ton)
16,3(ton)
20,7(ton)
25,0(ton)
2,7 30,0 3,0 24,7 16,0 16,0 3,5 22,3 16,0 16,0 13,0 4,0 20,3 16,0 16,0 13,0 4,5 18,3 16,0 16,0 13,0 5,0 16,0 15,8 13,0 9,0 6,0 13,6 13,6 12,2 9,0 7,0 10,5 10,7 10,0 8,8 8,0 8,2 8,4 8,4 7,8 9,0 6,7 6,8 6,9 6,7 10,0 5,7 5,8 5,8 12,0 4,1 4,2 4,2 14,0 3,2 3,2 16,0 2,5 2,5 18,0 2,0 20,0 1,6 22,0 1,3
Capacities Charges 2) 13,0 5,0 2,8 1,5 0,8
Radius (m)
5,95m x 2,25m — 360° Main Boom
7,5(ton)
11,9(ton)
16,3(ton)
3,0 10,2 10,6 8,9 3,5 7,8 8,1 7,5 4,0 6,2 6,5 6,5 4,5 5,1 5,3 5,5 5,0 4,5 4,6 6,0 3,3 3,4 7,0 2,6 2,6 8,0 2,0 2,1 9,0 1,6 1,7 10,0 1,4 12,0 0,9
Capacities Charges 2) 4,0 1,0
* only stationary
1) type of tyres 14.00
2) with horizontal boom
Radius (m)
Free on wheels 0 — 180°
7,5 1)
(ton)11,9 1)
(ton)16,3 1)
(ton)
3,0 10,0 10,2 10,2 3,5 8,8 9,1 9,3 4,0 8,0 8,3 8,4 4,5 7,3 7,5 7,6 5,0 6,9 7,0 6,0 5,7 5,8 7,0 4,4 4,5 8,0 3,5 3,6 9,0 2,9 2,9 10,0 2,5 12,0 1,8
Capacities Charges 2) 6,5 2,5 1,0
Radius (m)
Free on wheels 360°
7,5 1)
(ton)11,9 1)
(ton)16,3 1)
(ton)
3,0 3,5 6,0 6,3 6,5 4,0 5,1 5,5 5,5 4,5 4,4 4,8 4,9 5,0 4,1 4,2 6,0 3,0 3,1 7,0 2,3 2,4 8,0 1,8 1,9 9,0 1,5 1,5 10,0 1,2 12,0 0,8
Capacities Charges 2) 3,5 1,0
Radius (m)
5,95m x 4,0m — 360° Main Boom
7,5(ton)
11,9(ton)
16,3(ton)
20,7(ton)
25,0(ton)
3,0 21,8 16,0 16,0 3,5 19,4 16,0 16,0 13,0 4,0 14,9 15,3 13,5 12,0 4,5 11,6 12,0 11,6 10,4 5,0 9,8 10,0 9,2 8,3 6,0 7,0 7,2 7,3 6,7 7,0 5,4 5,5 5,6 5,5 8,0 4,3 4,4 4,5 4,5 9,0 3,5 3,6 3,7 3,7 10,0 3,0 3,1 3,1 12,0 2,1 2,2 2,2 14,0 1,6 1,7 16,0 1,2 1,3 18,0 1,0 20,0 0,7 22,0 0,5 24,0
Capacities Charges 2) 9,0 2,5 1,2 0,5
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne30
To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC30 (CITY CRANE) LIFTING CAPACITIES FLY JIB DUTIES
20,7
Radius (m)
5,95m x 5,90m — 360°
5,0 5,6 6,0 5,6 7,0 5,3 2,2 8,0 5,0 2,2 9,0 4,7 3,7 2,2 10,0 4,4 3,6 2,1 11,0 4,2 3,5 2,1 12,0 4,0 3,4 2.0 13,0 3,8 3,3 1,9 1,7 14,0 3,3 3,2 1,9 1,6 15,0 2,9 3,1 1,8 1,6 16,0 2,6 2,8 1,7 1,5 17,0 2,3 2,5 1,6 1,5 18,0 2,1 2,2 1,6 1,4 19,0 1,8 2,0 1,5 1,4 20,0 1,6 1,7 1,4 1,4 21,0 1,4 1,5 1,4 1,3 22,0 1,3 1,3 1,3 23,0 1,1 1,3 1,3 24,0 1,0 1,1 1,3 25,0 0,9 1,0 1,2 26,0 0,9 1,1 27,0 0,8 0,9 28,0 0,7 29,0 0,6 30,0 0,6
0° 30°7,1m
0° 30°13,0m
25,0
Radius (m)
5,95m x 5,90m — 360°
7,0 4,5 8,0 4,4 2,0 9,0 4,2 2,0 10,0 4,0 3,4 2,0 11,0 3,9 3,3 2,0 12,0 3,7 3,2 1,9 13,0 3,5 3,1 1,9 14,0 3,2 3,0 1,8 1,5 15,0 2,9 2,9 1,8 1,5 16,0 2,5 2,8 1,7 1,5 17,0 2,2 2,5 1,7 1,4 18,0 2,0 2,2 1,6 1,4 19,0 1,8 1,9 1,6 1,4 20,0 1,6 1,7 1,5 1,3 21,0 1,4 1,5 1,5 1,3 22,0 1,2 1,3 1,3 1,3 23,0 1,1 1,2 1,2 1,3 24,0 0,9 1,0 1,0 1,2 25,0 0,8 0,9 0,9 1,1 26,0 0,7 0,8 1,0 27,0 0,6 0,7 0,9 28,0 0,5 0,6 0,8 29,0 0,5 0,7 30,0 0,6
0° 30°7,1m
0° 30°13,0m
20,7
Radius (m)
5,95m x 4,0m — 360°
5,0 5,6 6,0 5,6 7,0 5,3 2,2 8,0 4,6 2,2 9,0 3,8 3,7 2,2 10,0 3,2 3,5 2,1 11,0 2,7 3,0 2,1 12,0 2,3 2,6 2.0 13,0 2,0 2,2 1,9 1,7 14,0 1,7 1,9 1,8 1,6 15,0 1,5 1,7 1,6 1,6 16,0 1,3 1,4 1,4 1,5 17,0 1,1 1,2 1,2 1,5 18,0 1,0 1,1 1,1 1,3 19,0 0,8 0,9 0,9 1,2 20,0 0,7 0,8 0,8 1,0 21,0 0,6 0,7 0,7 0,9 22,0 0,5 0,6 0,8 23,0 0,5 0,7 24,0 0,6 25,0 26,0 27,0 28,0 29,0 30,0
0° 30°7,1m
0° 30°13,0m
25,0
Radius (m)
5,95m x 4,0m — 360°
7,0 4,5 8,0 4,2 2,0 9,0 3,6 2,0 10,0 3,1 3,4 2,0 11,0 2,6 3,0 2,0 12,0 2,2 2,5 1,9 13,0 1,9 2,2 1,9 14,0 1,6 1,9 1,7 1,5 15,0 1,4 1,6 1,5 1,5 16,0 1,2 1,4 1,3 1,5 17,0 1,1 1,2 1,1 1,4 18,0 0,9 1,1 1,0 1,3 19,0 0,8 0,9 0,8 1,1 20,0 0,6 0,8 0,7 1,0 21,0 0,5 0,7 0,6 0,9 22,0 0,5 0,5 0,8 23,0 0,7 24,0 0,6 25,0 26,0 27,0 28,0 29,0 30,0
0° 30°7,1m
0° 30°13,0m
30 Tonne Crane
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne40
To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC40-2LDIMENSIONS
() w
ith in
depe
nden
t re
ar a
xle
stee
ring
HOOKBLOCK
Vehicle weight 28,520kg Capacity 35te 25te 15te 5te
Weight 330kg 215kg 175kg 90kg
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne40
To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC40-2LMAIN BOOM DUTIES
9,5 9,5 13,0 16,5 19,8 23,5 26,8 30,5 34,1 37,4
2,6 40,00
3,0 35,00 32,00 31,20 25,95 18,95
3,5 30,15 27,45 27,45 23,70 18,35 18,40
4,0 27,75 24,90 24,90 22,00 18,60 17,55
4,5 25,00 22,60 22,60 20,45 17,95 16,25 14,45
5,0 22,30 20,60 20,60 19,05 16,75 15,15 13,85
6,0 17,80 17,00 17,00 17,00 14,70 13,30 12,20 10,00
7,0 14,45 14,45 14,50 14,50 12,75 11,80 10,90 9,65 7,45
8,0 11,50 11,50 11,50 10,20 9,75 8,80 7,45 5,55
9,0 9,50 9,50 9,50 8,70 8,55 8,00 7,05 5,35
10,0 8,00 8,00 8,00 7,50 7,40 7,30 6,70 5,00
11,0 6,70 6,70 6,70 6,50 6,40 6,15 4,65
12,0 6,00 6,00 6,00 5,70 5,70 5,60 4,40
13,0 5,20 5,20 5,20 5,20 5,05 5,00 4,15
14,0 4,60 4,60 4,60 4,60 4,50 4,50 3,95
15,0 4,00 4,00 4,00 4,00 4,00 3,70
16,0 3,60 3,60 3,60 3,55 3,60 3,45
17,0 3,20 3,20 3,20 3,15 3,20 3,20
18,0 2,80 2,80 2,80 2,80 2,80
19,0 2,60 2,60 2,50 2,60 2,60
20,0 2,50 2,50 2,25 2,35 2,40
21,0 2,30 2,30 2,00 2,25 2,15
22,0 2,00 1,80 2,00 1,95
23,0 1,80 1,60 1,80 1,75
24,0 1,70 1,45 1,70 1,60
25,0 1,35 1,50 1,45
26,0 1,25 1,40 1,30
27,0 1,15 1,30 1,15
28,0 1,05 1,20 1,05
29,0 1,10 0,90
30,0 1,00 0,80
31,0 0,90 0,70
32,0 0,60
Radius
(m)
Outrigger width 6,2 x 5,95 - 360°Length of Main Boom from 9,5m to 37,4
(1)
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne40
To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC40-2LMAIN BOOM DUTIES
Max
. cou
nter
wei
ght:
5,5T
9,5 13,0 16,5 19,8 23,5 26,8 30,5 34,1 37,4 9,5 13,0 16,5 9,5 13,0 3,0 29,55 29,55 25,95 18,95 10,15 11,00 11,45 8,00 8,80 3,5 26,30 26,30 23,70 18,35 18,40 9,05 9.75 10,20 6,75 7,50 4,0 23,60 23,60 22,00 18,60 17,55 8,10 8,75 9,15 5,80 6,45 4,5 21,35 21,30 19,65 17,95 16,25 14,45 7,30 7,90 8,25 5,00 5,65 5,0 19,45 18,05 18,25 15,55 14,85 13,85 6,60 7,20 7,50 4,35 4,95 6,0 15,40 14,90 14,20 13,55 11,65 11,30 10,00 5,50 6,00 6,30 3,35 3,85 7,0 11,55 11,95 11,50 11,10 9,55 9,25 9,00 7,45 4,60 5,10 5,35 2,60 3,05 8,0 9,55 9,55 9,30 8,75 7,75 7,55 7,40 5,55 4,35 4,60 2,45 9,0 7,80 8,05 7,95 7,70 6,90 6,45 6,35 5,35 3,50 3,75 1,95 10,0 6,50 6,75 6,85 6,70 6,40 5,60 5,50 5,00 2,90 3,15 1,55 11,0 5,75 5,85 5,90 5,75 4,85 4,80 4,65 2,60 12,0 4,95 5,05 5,20 5,10 4,25 4,25 4,20 2,15 13,0 4,30 4,45 4,55 4,60 3,75 3,85 3,70 1,85 14,0 3,75 3,90 4,00 4,05 3,35 3,60 3,30 1,50 15,0 3,45 3,55 3,60 2,95 3,25 2,95 16,0 3,05 3,15 3,20 2,70 2,95 2,65 17,0 2,70 2,80 2,90 2,45 2,65 2,35 18,0 2,50 2,60 2,30 2,40 2,15 19,0 2,25 2,35 2,10 2,15 1,90 20,0 2,05 2,10 1,95 1,90 1,70 21,0 1,85 1,90 1,80 1,70 1,50 22,0 1,70 1,70 1,50 1,35 23,0 1,55 1,55 1,35 1,20 24,0 1,40 1,45 1,20 1,05 25,0 1,30 1,10 0.90 26,0 1,20 0.95 0,80 27,0 1,05 0,85 0,65 28,0 0,95 0,75 29,0 0,65
Radius (m)
Outrigger width 6,2 x 4,80 - 360°
— 0°From 9,5mm to 16,5m
— 360°From 9,5m
to13,0mLength of main boom
Free on wheels
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne40
To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC40-2LFLY JIB DUTIES
34,10m Main Boom 37,50m Main Boom
8,0m 8,0m
0° 20° 40° 0° 20° 40°
9,0 3,20 10,0 3,00 2,80 11,0 2,90 1,90 2,70 12,0 2,70 1,80 2,70 1,80 13,0 2,60 1,75 1,40 2,60 1,75 14,0 2,45 1,70 1,35 2,50 1,70 1,35 15,0 2,35 1,65 1,35 2,35 1,65 1,35 16,0 2,25 1,60 1,30 2,25 1,60 1,30 17,0 2,15 1,55 1,30 2,15 1,60 1,30 18,0 2,10 1,55 1,25 2,05 1,55 1,25 19,0 2,00 1,50 1,25 1,95 1,50 1,25 20,0 1,95 1,45 1,25 1,85 1,50 1,25 21,0 1,85 1,45 1,25 1,85 1,50 1,25 22,0 1,80 1,40 1,20 1,75 1,40 1,20 23,0 1,75 1,40 1,20 1,65 1,40 1,20 24,0 1,70 1,35 1,20 1,60 1,40 1,20 25,0 1,60 1,35 1,20 1,50 1,35 1,20 26,0 1,45 1,30 1,20 1,45 1,30 1,20 27,0 1,30 1,30 1,20 1,30 1,30 1,20 28,0 1,15 1,25 1,20 1,20 1,25 1,20 29,0 1,05 1,15 1,20 1,05 1,20 1,15 30,0 0,95 1,05 1,10 0,95 1,05 1,15 31,0 0,85 0,95 0,95 0,85 0,95 1,00 32,0 0.75 0.85 0.85 0,75 0,85 0,90 33,0 0,65 0,75 0,75 0,70 0,75 0,80 34,0 0,60 0,65 0,65 0,60 0,70 0,70 35,0 0,50 0,55 0,55 0,55 0,60 0,60 36,0 0,50 0,55 37,0
Radius (m)
Lifting capacities outriggers 6,20m x 5,95m
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne40
To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC40-1 (CITY CRANE)DIMENSIONS
() w
ith in
depe
nden
t re
ar a
xle
stee
ring
HOOKBLOCK
Vehicle weight 33,320kg
LOAD REDUCTIONS
Boom Length 7,8m 10,7m 13,6m 19,5m 25,3m 28,4m 31,2m
(Citycrane) Reductions 420kg 310kg 250kg 180kg 130kg 120kg 110kg
Capacity 25,3te 10te 3,3te
Weight 220kg 100kg 80kg
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne40
To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC40-1 (CITY CRANE)LIFTING CAPACITIES - OUTRIGGERS FULLY EXTENDED
Outriggers fully extended Free on wheels Radius Over rear 360° Slew over Rear
(m) 7,8 7,8 10,7 13,6 19,5 25,3 28,4 31,2 7,8 10,7 13,6 3 40,0 34,3 25,0 21,0 14,5 14,0 15,1 3,5 32,4 25,0 21,0 12,9 12,4 13,4 4 30,5 25,0 21,0 16,0 11,5 11,1 12,1 4,5 28,3 25,0 20,7 16,0 10,4 10,0 11,0 5 24,0 19,7 16,0 9,0 10,0 6 20,3 17,9 16,0 14,0 7,5 8,4 7 17,0 16,0 15,3 13,2 11,1 6,1 7,2 8 15,4 14,0 12,2 10,8 9,0 5,9 9 12,6 12,3 11,2 10,1 8,8 4,8 10 10,5 10,3 10,3 9,4 8,3 4,1 12 8,1 7,6 7,6 7,3 14 5,9 6,0 5,9 16 5,0 4,9 4,7 18 4,3 4,0 3,8 20 3,5 3,4 3,1 22 3,0 2,8 2,6 24 2,3 2,1 26 1,7 28 1,4 30
Outriggers partially extended (4,40m) - 360Radius Main Boom(m) 7,8 10,7 13,6 19,5 25,3 28,4 31,23 34,3 25,0 21,0 3,5 31,2 25,0 21,0 4 28,3 25,0 21,0 16,0 4,5 23,8 23,0 20,7 16,0 5 18,4 18,0 16,0 6 13,0 14,4 14,2 13,6 7 9,8 11,1 11,4 10,9 10,8 8 8,9 9,2 8,7 8,8 8,89 7,3 7,6 7,7 7,4 7,210 6,2 6,4 6,5 6,3 6,112 4,8 4,9 4,7 4,514 3,7 3,8 3,6 3,416 3,0 3,0 2,8 2,718 2,5 2,3 2,120 2,1 1,8 1,722 1,7 1,5 1,324 1,2 1,026 0,828 0,6HB 20,0 7,0 5,2 2,5 1,5 0,8
LIFTING CAPACITIES - OUTRIGGERS PARTIALLY EXTENDED
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne40
To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC40-1 (CITY CRANE)LIFTING CAPACITIES - OUTRIGGERS IN MIN. POSITION
LIFTING CAPACITIES FLY JIB
360° Slew - 25.3m Main Boom + Outriggers Fully Extended Outriggers Partially Extended (4.40m)
Radius 7.1m ext 13.0m ext 7.1m ext 13.0m ext(m) 0° 30° 0° 30° 0° 30° 0° 30°8 6,5 6,5 9 6,2 6,2 10 5,9 4,2 3,6 5,9 4,2 3,6 12 5,4 4,0 3,3 4,7 4,0 3,3 14 4,9 3,8 3,0 3,6 3,8 3,016 4,5 3,7 2,8 2,2 2,8 3,1 2,8 2,218 4,0 3,5 2,6 2,1 2,3 2,5 2,4 2,120 3,3 3,4 2,4 2,0 1,8 2,0 1,9 2,022 2,8 2,9 2,3 1,9 1,5 1,6 1,6 1,924 2,3 2,4 2,1 1,9 1,2 1,3 1,3 1,626 1,9 2,0 1,8 0,9 1,0 1,328 1,6 1,7 1,8 0,7 0,8 1,030 1,5 1,6 0,6 0,832 1,2 34 1,0
360° Slew - 31.2m Main Boom + Outriggers fully extended Outriggers Partially Extended
Radius 7.1m ext 13.0m ext 7.1m ext 13.0m ext(m) 0° 30° 0° 30° 0° 30° 0° 30°10 5,0 5,0 12 4,8 3,9 3,0 4,6 3,9 3,0 14 4,6 3,7 2,9 3,5 3,7 2,9 16 4,4 3,5 2,8 2,8 3,1 2,8 18 4,0 3,3 2,7 2,1 2,2 2,5 2,3 2,120 3,3 3,1 2,5 2,0 1,7 2,0 1,8 2,022 2,7 2,9 2,4 1,9 1,4 1,6 1,5 1,824 2,2 2,4 2,2 1,9 1,1 1,3 1,2 1,526 1,8 2,0 1,9 1,8 0,8 1,0 0,9 1,228 1,5 1,6 1,6 1,8 0,6 0,7 0,7 1,030 1,2 1,3 1,3 1,6 0,732 0,9 1,1 1,3 34 0,7 0,9 1,0 36 0,7
Free on wheels - 360°Radius Outriggers at 2.34m - 360° Slew Slew (Stationery)(m) 7,8 10,7 13,6 19,5 7,8 10,7 13,64 11,8 11,2 12,6 12,9 4,5 9,8 9,2 10,5 10,8 5,9 5,4 6,65 7,7 8,9 9,2 4,7 5,86 5,7 6,7 7,0 3,6 4,77 4,3 5,3 5,5 2,8 3,88 4,3 4,5 3,19 3,6 3,8 2,610 3,0 3,2 2,212 2,3 14 1,7
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne60
To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
LOAD REDUCTIONS
Vehicle weight 43,280kg
GROVE GMK 3055DIMENSIONS
HOOKBLOCK
Capacity 63te 40te 16te 5te
Weight 600kg 400kg 250kg 100kg
Boom Length 9,6 13,0m 16,4m 19,8m 23,2m 26,8m 29,6m 34,0m 36,6m 39,7m 43,0m
Reductions 500kg 385kg 300kg 252kg 200kg 187kg 167kg 147kg 150kg 126kg 100kg
Ra
= R
adiu
s al
l whe
els
stee
red
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne60
To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
GROVE GMK 3055MAIN BOOM DUTIES
** 0
° ov
er r
ear
with
add
ition
al e
quip
men
t
*
0° o
ver
rear
Radius Telescopic Boom — 11,6 t counterweight(m) 9,6 13,0 16,4 19,8 23,2 26,8 29,6 34,0 36,6 39,7 43,0
2,5 55,0**
3,0 50,0*/45,0 42,5 39,5 38,0 32,5 23,5
4,0 37,0 36,0 34,5 33,0 29,5 21,5 19,0
5,0 31,5 31,0 30,0 28,5 26,0 19,4 17,5 14,4 11,3
6,0 26,5 26,5 26,0 25,5 23,5 17,9 16,1 14,2 11,3 9,0
7,0 20,5 22,5 22,0 22,0 21,0 16,3 14,7 13,2 11,3 9,0 7,6
8,0 19,2 19,3 18,1 17,8 15,2 13,3 12,2 10,9 9,0 7,6
9,0 15,8 15,9 15,7 15,2 14,1 11,9 11,3 10,3 9,0 7,6
10,0 13,5 13,8 13,8 13,2 13,0 10,8 10,3 9,6 8,6 7,6
11,0 11,8 11,8 11,5 11,6 9,7 9,3 8,9 8,1 7,5
12,0 10,2 10,2 10,4 10,3 9,1 8,6 8,4 7,7 7,2
13,0 9,0 8,9 9,3 9,0 8,4 8,0 7,8 7,3 6,8
14,0 8,1 8,3 8,0 7,7 7,4 7,2 6,9 6,5
15,0 7,5 7,4 7,1 6,8 6,8 6,6 6,5 6,2
16,0 6,8 6,6 6,4 6,1 6,1 6,1 6,1 5,8
18,0 5,4 5,2 4,9 4,9 5,0 5,1 5,2
20,0 4,5 4,2 4,0 4,0 4,1 4,2 4,4
22,0 3,5 3,3 3,2 3,5 3,8 3,6
24,0 2,3 3,1 2,6 3,2 3,3 3,0
26,0 2,2 2,2 2,9 2,8 2,5
28,0 1,7 2,4 2,3 2,1
30,0 1,4 2,1 2,0 1,8
32,0 1,8 1,7 1,5
34,0 1,4 1,2
36,0 0,8 1,0
38,0 0,7
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne60
To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
GROVE GMK 3055FLY JIB DUTIES
Swingway (hydraulic luffing) — 8,7m 39,7 43,0
Radius 8,7 8,7
(m) 0º 20º 40º *0º - 20° *20º - 40° 0º 20º 40º *0º - 20° *20º - 40°9,0 4,810,0 4,8 4,111,0 4,8 4,112,0 4,8 4,2 2,5 4,1 13,0 4,7 4,1 2,5 4,1 3,8 2,514,0 4,7 4,0 3,3 2,4 1,9 4,1 3,8 2,415,0 4,6 3,9 3,3 2,3 1,9 4,1 3,8 3,2 2,4 1,916,0 4,5 3,8 3,2 2,2 1,8 3,9 3,7 3,2 2,3 1,918,0 4,1 3,7 3,2 2,1 1,8 3,6 3,4 3,1 2,2 1,820,0 3,8 3,5 3,1 2,0 1,7 3,3 3,2 3,1 2,1 1,822,0 3,4 3.3 3,0 1,9 1,7 3,1 3,0 2,9 2,0 1,724,0 2,9 2,9 3,0 1,8 1,7 2,9 2,8 2,7 1,9 1,726,0 2,6 2,5 2,6 1,8 1,6 2,5 2,5 2,6 1,8 1,728,0 2,3 2,3 2,3 1,7 1,6 2,1 2,1 2,3 1,8 1,630,0 2,0 2,0 2,1 1,6 1,6 1,7 1,7 1,9 1,7 1,632,0 1,6 1,6 1,8 1,6 1,6 1,4 1,4 1,5 1,4 1,534,0 1,4 1,4 1,5 1,4 1,5 1,1 1,1 1,3 1,1 1,336,0 1,1 1,1 1,2 1,1 1,2 0,9 0,9 1,0 0,9 1,038,0 0,9 0,9 1,0 0,9 1,0 0,7 0,7 0,8 0,7 0,840,0 0,7 0,7 0,8 0,7 0,8 42,0 0,6 0,6
Swingway (hydraulic luffing) — 15m 39,7 43,0
Radius 15 15
(m) 0º 20º 40º *5º - 20° *20º - 40° 0º 20º 40º *5º - 20° *20º - 40°9,0 2,710,0 2,7 2,411,0 2,7 2,412,0 2,7 2,413,0 2,7 2,414,0 2,7 2,415,0 2,6 2,2 1,3 2,4 16,0 2,6 2,1 1,2 2,4 2,1 1,318,0 2,6 2,1 1,2 2,4 2,1 1,2 20,0 2,5 2,0 1,6 1,1 0,9 2,3 2,0 1,6 1,1 0,922,0 2,3 1,9 1,6 1,0 0,8 2,3 1,9 1,6 1,1 0,824,0 2,2 1,8 1,6 1,0 0,8 2,2 1,8 1,6 1,0 0,826,0 2,1 1,8 1,5 0,9 0,8 2,1 1,8 1,5 0,9 0,828,0 2,0 1,7 1,5 0,9 0,8 2,0 1,7 1,5 0,9 0,830,0 1,9 1,7 1,5 0,8 0,7 1,9 1,7 1,5 0,9 0,832,0 1,7 1,6 1,5 0,8 0,7 1,6 1,6 1,5 0,8 0,734,0 1,6 1,5 1,5 0,8 0,7 1,3 1,3 1,5 0,8 0,736,0 1,3 1,3 1,4 0,7 0,7 1,1 1.1 1,3 0,8 0,738,0 1,1 1,1 1,3 0,7 0,7 0,9 0,9 1,1 0,7 0,740,0 0,9 0,9 1,1 0,7 0,7 0,7 0,7 0,9 0,7 0,742,0 0,7 0,7 0,9 0,7 0,7 0,7 0,744,0 0,6 0,6 0,7 0,6 0,6*
Luffi
ng u
nder
load
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne60
To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC60-3LDIMENSIONS
() w
ith in
depe
nden
t re
ar a
xle
stee
ring
HOOKBLOCK
Vehicle weight 47,600kg Capacity 35te 15te 5te
Weight 385kg 170kg 90kg
3.965m
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne60
To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC60-3LMAIN BOOM DUTIES
9,9 13,3 16,7 19,5 22,3 26,8 31,3 34,2 37,2 40,1 44,0
3 51,5 39,1 37,9 40,2
3,5 47,6 40,5 39,0 37,6
4 42,7 41,2 40,1 34,8 30,1 23,5
4,5 38,5 38,5 37,3 32,4 28,5 23,5
5 36,0 36,0 34,9 30,2 26,8 22,9
6 31,7 31,7 31,0 26,8 23,6 20,5 16,0
7 26,9 25,6 25,7 23,8 21,1 18,4 16,0 14,0 12,0
8 22,8 21,3 20,0 19,0 16,5 14,5 13,3 11,8
9 19,5 19,7 16,8 16,2 15,1 13,3 12,3 11,3 8,8
10 16,5 16,7 14,3 14,7 13,7 12,2 11,4 10,5 8,8 6,8
12 12,4 12,0 12,4 10,9 10,4 9,8 9,0 8,2 5,9
14 9,4 9,2 9,6 9,3 8,5 8,2 7,9 7,3 5,2
16 7,3 7,6 7,4 7,5 6,7 6,9 6,4 4,7
18 6,2 6,0 6,2 5,6 5,7 5,7 4,2
20 5,1 4,9 5,1 5,0 5,1 4,8 3,8
22 4,0 4,2 4,4 4,2 4,0 3,3
24 3,3 3,5 3,7 3,5 3,3 3,0
26 3,0 3,2 3,0 2,7 2,7
28 2,5 2,7 2,5 2,2 2,3
30 2,3 2,1 1,8 1,9
32 1,9 1,7 1,5 1,5
34 1,4 1,2 1,2
36 0,9 1,0
38 0,7
40 0,5
Radius
(m)
Outrigger width 7,20m x 6,30 — 360°Length of Main Boom 11,6 t counterweight
• While lifting on main boom with extension rigged, deduct from main boom load chart the following; 750kg with extension 7.75m. 1650kg with extension 7.75m + 7m. • With extension in the transported position, there is no reduction in load capacity.
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne60
To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC60-3LMAIN BOOM DUTIES
9,91) 9,9 13,3 16,7 19,5 22,3 26,8 31,3 34,2 37,2 40,1 44,0
2,5 60,0
3 51,5 48,9 39,1 37,9 40,2
3,5 47,6 43,9 40,5 39,0 37,6
4 44,1 39,7 39,7 39,7 34,8 30,1 23,5
4,5 41,0 36,1 36,1 33,8 31,0 28,5 23,5
5 38,2 33,1 31,4 29,0 26,7 25,3 22,9
6 33,0 26,9 23,8 22,3 20,6 19,7 19,0 16,0
7 26,9 20,2 18,9 18,6 17,0 15,8 15,5 15,1 12,3 10,8
8 17,0 16,7 15,7 15,4 14,3 13,3 12,3 10,8
9 13,9 14,0 13,4 13,2 12,3 12,1 10,7 10,2 8,8
10 11,7 11,7 11,6 11,5 10,7 10,6 9,3 9,2 8,8 6,8
12 8,7 8,5 8,8 8,3 8,3 7,8 7,8 7,3 5,9
14 6,6 6,5 6,8 6,6 6,6 6,6 6,3 5,9 5,2
16 5,0 5,3 5,1 5,4 5,5 5,1 4,7 4,6
18 4,3 4,1 4,3 4,5 4,2 3,9 3,8
20 3,5 3,3 3,5 3,6 3,5 3,1 3,1
22 2,6 2,8 3,0 2,8 2,5 2,5
24 2,1 2,3 2,4 2,3 2,0 2,0
26 1,8 2,0 1,8 1,6 1,6
28 1,4 1,6 1,4 1,2 1,2
30
Radius
(m)
Outrigger width 7,20m x4,80 — 360°Length of Main Boom 11,6 t counterweight
1) o
ver
rear
Le
ngth
s m
ay v
ary
depe
ndin
g on
var
ious
tel
esco
ping
seq
uenc
es
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne60
To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC60-3LFLY JIB DUTIES
37,2m Main Boom 44,0m Main Boom 44,0m Main Boom
8,0m 8,0m 15,0m
0° 20° 40° 0° 20° 40° 0° 20° 40°
12 5,6 4,3 3,6
14 5,6 4,3 3,5 3,4 2,0
16 5,0 4,0 3,2 3,4 3,1 2,9 2,0
18 4,4 3,8 3,1 3,1 2,8 2,7 1,9 1,3
20 3,9 3,6 3,1 2,8 2,6 2,4 1,8 1,3
22 3,5 3,5 3,0 2,5 2,3 2,3 1,7 1,2 1,0
24 3,1 3,1 3,0 2,3 2,2 2,1 1,6 1,2 1,0
26 2,7 2,8 2,8 2,1 2,0 1,9 1,5 1,1 1,0
28 2,2 2,4 2,5 1,9 1,8 1,8 1,4 1,1 0,9
30 1,8 1,9 2,1 1,7 1,7 1,7 1,4 1,1 0,9
32 1,4 1,6 1,6 1,5 1,6 1,6 1,3 1,0 0,9
34 1,1 1,2 1,3 1,2 1,4 1,5 1,2 1,0 0,9
36 0,8 0,9 1,0 0,9 1,1 1,2 1,1 1,0 0,9
38 0,6 0,7 0,7 0,7 0,8 0,9 0,9 1,0 0,9
40 0,6 0,6 0,7 0,9 0,9
42 0,7 0,8
44 0,6
Radius (m)
Lifting capacities outriggers 7,20m x 6,30m
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne70
To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC70 (CITY CRANE)DIMENSIONS
() w
ith in
depe
nden
t re
ar a
xle
stee
ring
HOOKBLOCK
Vehicle weight 58,000kg
LOAD REDUCTIONS
Boom Length 8m 13,1m 18,1m 23,4m 28,0m 32,3m 37,4m 40,1m 45,3m 48,0m 52,0m
Reductions 0,7 0,5 0,3 0,2 0,2 0,2 0,2 0,1 0,1 0,1 0,1
Capacity 5,5te 16,5te 38,5te 60,5te
Weight 170kg 350kg 550kg 650kg
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne70
To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC70 (CITY CRANE)MAIN BOOM DUTIES
Radius Length of Main Boom — 12,3 t counterweight, 360° (m) 8,0* 8,0 13,1 18,1 23,4 28,0 32,3 37,4 40,1 45,3 48,0 52,0
3 70,0 55,1 53,3 47,8 37,6
3,5 63,3 50,2 50,4 46,1 37,6
4 55,0 46,0 46,4 44,3 37,6
4,5 48,5 42,3 42,8 41,7 37,6
5 39,5 39,3 36,7
6 34,4 34,3 33,6 24,5 20,1
7 29,8 29,9 29,9 22,4 18,5
8 25,9 25,9 25,6 20,7 17,1 14,0
9 22,6 22,5 22,6 19,0 15,9 13,0 12,0
10 19,9 20,1 20,2 17,6 14,8 12,1 11,3 8,9
12 15,7 15,4 14,3 13,0 10,7 10,0 8,5 8,0
14 12,4 12,0 11,8 10,9 9,5 8,8 7,7 7,3 6,2
16 10,1 9,8 9,0 8,6 8,0 7,0 6,7 5,8
18 8,6 8,1 7,9 7,0 7,1 6,3 6,1 5,4
20 7,0 6,6 6,3 6,0 5,8 5,6 5,0
22 6,2 5,7 5,8 5,3 5,1 5,1 4,7
24 5,4 5,2 4,9 4,9 4,5 4,4 4,3
26 4,5 4,3 4,3 4,0 3,7 3,7
28 4,2 3,9 3,8 3,3 3,1 3,1
30 3,4 3,3 2,8 2,6 2,6
32 3,0 2,8 2,4 2,1 2,2
34 2,7 2,4 2,2 1,8 1,8
36 2,2 1,9 1,4 1,4
38 1,6 1,1 1,1
40 1,4 0,9 0,9
42 1,1 0,6 0,6
44* ov
er fr
ont
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne70
To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC70 (CITY CRANE)MAIN BOOM DUTIES
Radius Partial Rigged 7,45m x 4,8m — 12,3 t counterweight, 360° (m) 8,0 13,1 18,1 23,4 28,0 32,3 37,4 40,1 45,3 48,0 52,0
3 50,5 50,8 47,8 37,6
3,5 45,5 46,0 45,8 37,6
4 41,3 42,1 42,0 37,6
4,5 37,8 38,6 38,7 37,6
5 35,6 35,6 34,9
6 29,9 30,0 28,2 23,6 20,1
7 23,2 23,6 23,3 19,7 18,5
8 18,9 19,0 18,7 16,7 15,9 14,0
9 15,6 15,7 15,4 15,1 13,7 12,9 12,0
10 13,3 13,4 13,1 12,2 11,3 11,1 8,9
12 10,4 10,3 10,0 9,6 9,1 8,8 8,5 8,0
14 8,2 8,3 8,1 7,9 7,7 7,5 7,4 7,1 6,2
16 6,8 6,6 6,7 6,5 6,3 5,9 5,7 5,6
18 5,7 5,7 5,5 5,4 5,2 4,8 4,6 4,6
20 4,8 4,7 4,5 4,4 4,2 3,8 3,8
22 4,2 4,0 3,8 3,8 3,5 3,1 3,1
24 3,4 3,2 3,2 2,9 2,5 2,5
26 3,0 2,7 2,8 2,4 2,1 2,1
28 2,6 2,3 2,4 2,1 1,6 1,7
30 2,0 2,0 1,7 1,2 1,3
32 1,7 1,7 1,4 0,9 0,9
34 1,5 1,5 1,1 0,6
36 1,2 0,8
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne70
To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC70 (CITY CRANE)MAIN BOOM DUTIES
Main Boom Extension — 12,3 t counterweight, 360°
40,1mRadius 7,6m 14,0m(m) 0° 20° 35° 50° 0° 20° 35° 50°12 8,1 4,5 14 7,2 6,9 4,4 16 6,6 6,5 5,8 4,9 4,3 18 5,9 5,9 5,5 4,9 4,1 3,4 20 5,4 5,3 5,2 4,8 3,9 3,3 3,022 4,9 4,9 4,9 4,7 3,8 3,2 2,9 2,424 4,1 4,4 4,5 4,4 3,6 3,1 2,8 2,426 3,6 3,8 3,9 4,0 3,5 3,0 2,7 2,428 3,3 3,3 3,3 3,4 3,1 3,0 2,7 2,330 3,0 3,1 3,1 3,1 2,7 2,9 2,7 2,332 2,7 2,8 2,8 2,8 2,5 2,6 2,6 2,334 2,3 2,5 2,6 2,4 2,3 2,4 2,4 2,336 2,0 2,1 2,2 2,0 2,2 2,2 2,238 1,7 1,8 1,8 1,9 1,9 2,0 2,040 1,4 1,5 1,4 1,6 1,7 1,8 1,842 1,2 1,2 1,4 1,6 1,644 1,0 0,8 1,2 1,3 1,446 1,0 1,1 1,048 0,8 0,950 0,652
Main Boom Extension — 12,3 t counterweight, 360°
45,3mRadius 7,6m 14,0m(m) 0° 20° 35° 50° 0° 20° 35° 50°14 6,2 3,9 16 5,7 5,3 3,8 18 5,3 5,0 4,9 4,7 3,8 20 4,8 4,7 4,6 4,6 3,6 3,2 22 4,4 4,4 4,3 4,3 3,5 3,1 2,824 4,1 4,1 4,1 4,1 3,4 3,0 2,7 2,326 3,5 3,8 3,8 3,8 3,2 3,0 2,7 2,328 3,2 3,2 3,4 3,5 3,0 2,9 2,6 2,330 2,7 3,0 3,0 3,0 2,6 2,7 2,6 2,332 2,3 2,5 2,6 2,7 2,2 2,6 2,5 2,334 1,9 2,1 2,2 2,2 2,1 2,2 2,4 2,336 1,6 1,7 1,8 1,8 1,7 1,8 2,0 2,238 1,4 1,5 1,5 1,4 1,7 1,8 1,840 1,2 1,3 1,3 1,2 1,4 1,6 1,742 0,9 1,0 1,1 1,1 1,2 1,3 1,444 0,7 0,8 0,8 0,9 1,1 1,146 0,7 0,9 0,948 0,7 0,750 52 54
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne70
To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC70 (CITY CRANE)MAIN BOOM DUTIES
Main Boom Extension — 12,3 t counterweight, 360°
48,0mRadius 7,6m 14,0m(m) 0° 20° 35° 50° 0° 20° 35° 50°14 5,1 16 4,8 4,3 3,3 18 4,6 4,1 3,9 3,8 3,1 20 4,4 3,9 3,7 3,6 2,9 2,5 22 4,1 3,7 3,6 3,5 2,8 2,4 2,324 3,9 3,6 3,4 3,5 2,7 2,3 2,2 2,126 3,6 3,4 3,3 3,3 2,5 2,2 2,1 2,028 3,0 3,2 3,1 3,2 2,4 2,1 2,0 2,030 2,5 2,8 2,9 3,0 2,3 2,1 2,0 2,032 2,0 2,3 2,4 2,5 2,2 2,0 1,9 1,934 1,7 1,9 2,0 2,1 1,9 1,9 1,9 1,936 1,3 1,5 1,6 1,7 1,5 1,9 1,8 1,938 1,0 1,2 1,3 1,3 1,2 1,5 1,7 1,840 0,7 0,9 1,0 0,9 1,2 1,4 1,542 0,6 0,7 0,7 1,0 1,1 1,244 0,7 0,9 0,946 0,6
Main Boom Extension — 12,3 t counterweight, 360°
51,5mRadius 7,6m 14,0m(m) 0° 20° 35° 50° 0° 20° 35° 50°16 4,3 18 4,0 3,9 2,9 20 3,8 3,7 3,6 3,6 2,8 22 3,6 3,5 3,5 3,5 2,7 2,4 24 3,4 3,3 3,3 3,3 2,6 2,3 2,126 3,2 3,1 3,1 3,2 2,4 2,2 2,1 2,028 2,9 2,9 2,9 3,0 2,3 2,1 2,0 2,030 2,4 2,7 2,8 2,8 2,2 2,0 1,9 1,932 2,0 2,2 2,4 2,5 2,1 1,9 1,9 1,934 1,6 1,8 2,0 2,0 1,8 1,9 1,8 1,936 1,2 1,5 1,6 1,6 1,4 1,8 1,8 1,838 0,9 1,1 1,2 1,3 1,1 1,5 1,7 1,840 0,7 0,8 0,9 1,0 0,9 1,2 1,4 1,542 0,7 0,6 0,9 1,1 1,244 0,7 0,8 0,946 0,648
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne70
To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC70 (CITY CRANE)MAIN BOOM DUTIES
Main Boom Extension — 12,3 t counterweight, 360°
19,9mRadius 40,1m 45,3m(m) 0° 20° 35° 50° 0° 20° 35° 50°14 2,7 16 2,6 2,4 18 2,5 2,3 20 2,4 2,0 2,2 22 2,3 2,0 2,2 24 2,2 1,9 1,8 2,1 1,8 26 2,1 1,9 1,7 1,4 2,0 1,8 1,7 28 2,1 1,8 1,7 1,4 2,0 1,7 1,6 1,430 2,0 1,8 1,6 1,4 1,9 1,7 1,6 1,432 1,9 1,7 1,6 1,4 1,8 1,7 1,6 1,334 1,8 1,7 1,6 1,4 1,8 1,6 1,5 1,336 1,7 1,6 1,6 1,4 1,5 1,6 1,5 1,338 1,6 1,6 1,5 1,4 1,3 1,6 1,5 1,340 1,4 1,5 1,5 1,4 1,2 1,4 1,5 1,342 1,2 1,4 1,4 1,4 1,0 1,1 1,4 1,344 1,1 1,2 1,3 1,4 0,9 1,1 1,1 1,246 1,0 1,0 1,1 1,2 0,7 0,9 1,0 1,148 0,8 1,0 1,1 0,7 0,8 0,950 0,6 0,8 0,9 0,6 0,752 0,6 5456
Main Boom Extension — 12,3 t counterweight, 360°
19,9mRadius 48,0m 51,5m(m) 0° 20° 35° 50° 0° 20° 35° 50°18 2,1 1,8 20 2,0 1,8 22 1,9 1,8 24 1,8 1,6 1,7 26 1,7 1,5 1,7 1,5 28 1,7 1,5 1,4 1,6 1,4 30 1,6 1,4 1,3 1,3 1,5 1,4 1,3 32 1,5 1,3 1,3 1,2 1,5 1,3 1,2 1,234 1,5 1,3 1,2 1,2 1,4 1,3 1,2 1,236 1,4 1,2 1,2 1,2 1,4 1,2 1,2 1,238 1,3 1,2 1,2 1,2 1,1 1,2 1,1 1,240 1,0 1,1 1,1 1,2 0,9 1,1 1,1 1,142 0,8 1,1 1,1 1,1 0,6 1,1 1,1 1,144 0,9 1,1 1,1 0,8 1,0 1,146 0,7 0,9 1,0 0,6 0,8 1,048 0,6 0,7 0,750
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne80
To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
LOAD REDUCTIONS
Vehicle weight 60,860kg
TEREX/DEMAG AC80-2DIMENSIONS
HOOKBLOCK
Boom Length 10,9m 16,1m 21,4m 25,0m 31,3m 37,1m 42,3m 46,1m 50,0m
Reductions 550kg 380kg 280kg 250kg 200kg 170kg 150kg 130kg 120kg
Capacity 77te 60,5te 38,5te 16,5te 5,5te
Weight 750kg 650kg 550kg 350kg 170kg
() w
ith in
depe
nden
t re
ar a
xle
stee
ring
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne80
To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC80-2MAIN BOOM DUTIES
Radius Length of main boom Free on Wheels
(m) 10,9 16,1 21,4 25,0 31,3 37,1 42,3 46,1 50,0 10,9 16,1
3 80,0
3 70,0
3,5 64,4 55,0
4 59,3 55,0 45,0 12,3 12,0
4,5 54,9 52,9 43,0 32,0 11,0 10,7
5 51,0 49,6 41,0 32,0 20,0 9,9 9,6
6 42,0 41,7 36,5 31,0 20,0 16,0 8,1 7,8
7 35,0 34,8 32,0 29,0 20,0 15,5 13,0 6,6 6,4
8 28,3 29,6 28,0 26,0 20,0 15,0 13,0 8,8 5,5 5,2
9 25,6 24,8 23,5 19,5 14,5 12,9 8,8 6,5 4,2
10 22,1 21,0 21,0 18,5 14,0 12,7 8,8 6,5 3,4
12 16,1 15,8 16,8 16,1 12,7 11,8 8,8 6,5 2,1
14 13,8 13,3 12,8 11,3 10,9 8,5 6,5
16 11,2 10,7 10,2 10,0 10,0 8,0 6,5
18 9,2 8,7 8,2 8,5 8,8 7,5 6,2
20 7,2 7,0 7,4 7,3 7,0 5,9
22 6,4 6,3 6,4 6,3 5,5
24 5,8 5,8 5,4 5,3 5,1
26 5,2 5,2 4,5 4,7 4,4
28 4,5 4,0 4,0 3,7
30 3,9 3,7 3,4 3,1
32 3,4 3,3 2,9 2,6
34 2,8 2,4 2,1
36 2,4 2,0 1,7
38 2,1 1,7 1,4
40 1,4 1,1
42 1,1 0,7
44
46
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne80
To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC80-2FLY JIB DUTIES
46,1metre Main BoomRadius(m) 9,2m 17,6m
0° 20° 40° 0° 20° 40°10 3,9 12 3,9 1,7 14 3,9 3,4 1,7 16 3,9 3,4 3,0 1,7 18 3,9 3,3 3,0 1,7 1,4 20 3,7 3,2 2,9 1,6 1,4 22 3,5 3,1 2,8 1,5 1,4 24 3,3 2,9 2,7 1,5 1,4 1,226 3,1 2,8 2,6 1,4 1,4 1,128 3,0 2,6 2,5 1,4 1,4 1,130 2,8 2,5 2,4 1,3 1,3 1,132 2,7 2,4 2,3 1,3 1,2 1,134 2,4 2,3 2,2 1,2 1,1 1,136 2,0 2,2 2,1 1,2 1,1 1,138 1,6 1,8 1,9 1,1 1,1 1,040 1,3 1,5 1,6 1,1 1,1 1,042 1,0 1,2 1,1 1,1 1,044 0,8 0,9 1,0 1,1 1,046 0,6 0,8 1,1 1,048 0,6 0,8 1,0
50 0,6
50metre Main BoomRadius(m) 9,2m 17,6m
0° 20° 40° 0° 20° 40°12 3,0 14 3,0 3,0 1,2 16 3,0 3,0 2,7 1,2 18 3,0 2,9 2,7 1,2 20 2,9 2,8 2,6 1,2 1,1 22 2,8 2,7 2,5 1,1 1,1 24 2,6 2,5 2,3 1,1 1,1 1,026 2,5 2,4 2,2 1,0 1,1 1,028 2,3 2,2 2,1 1,0 1,0 1,030 2,2 2,1 2,0 1,0 1,0 1,032 2,1 2,0 1,9 1,0 1,0 1,034 2,0 1,9 1,9 0,9 1,0 1,036 1,9 1,8 1,8 0,9 0,9 0,938 1,5 1,8 1,8 0,9 0,9 0,940 1,2 1,4 1,6 0,9 0,9 0,942 0,9 1,1 0,8 0,9 0,944 0,7 0,9 0,7 0,8 0,946 0,6 0,7 0,8 0,848 0,8 0,8
50 0,6
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne13
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
GROVE GMK 5130DIMENSIONS
Ra
= R
adiu
s al
l whe
els
stee
red
HOOKBLOCK
Vehicle weight 65,000kg
LOAD REDUCTIONS
Boom Length 12,9m 22,3m 27,0m 31,6m 36,3m 41,2m 45,8m 50,6m 55,3m 60,0m
Reductions 800kg 500kg 400kg 300kg 300kg
Capacity 8,0te 20,0te 50,0te 75,0te 100te
Weight 200kg 325kg 675kg 850kg 1150kg
Overall Vehicle Width 3m
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne13
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
GROVE GMK 5130MAIN BOOM DUTIES
Radius Length of main boom — 40,1 t counterweight
(m) 12,9* 12,9 17,6 22,3 27,0 31,6 36,3 41,1 45,8 50,6 55,3 60,02,5 130**/110,0
3 94,5 93,5 86,0 81,0 65,0
4 81,0 79,0 76,5 71,0 65,0 50,0
5 70,5 68,0 67,5 63,5 60,5 49,5 38,0
6 62,0 59,5 60,0 57,5 54,5 47,0 37,0 28,0 20,5
7 55,0 52,5 53,0 52,0 50,0 44,0 35,0 28,0 20,5
8 48,0 46,5 47,0 47,0 46,0 41,5 33,0 28,0 20,5 16,0 11,6
9 41,0 41,0 42,5 42,5 42,0 39,0 31,5 26,5 20,5 16,0 11,6 10,0
10 31,5 31,5 38,0 38,0 37,5 37,0 29,5 25,0 20,5 16,0 11,6 10,0
11 35,0 34,5 34,0 34,5 28,0 23,5 20,5 16,0 11,6 10,0
12 32,0 31,5 31,5 32,0 26,5 22,5 19,5 16,0 11,6 10,0
13 29,0 29,0 28,5 29,5 25,0 21,0 18,6 16,0 11,6 10,0
14 25,0 26,5 26,0 27,0 23,5 19,7 17,7 15,8 11,6 10,0
15 24,0 24,5 24,0 22,5 18,7 16,8 15,2 11,6 10,0
16 21,5 22,5 21,5 21,5 17,6 15,9 14,5 11,6 10,0
18 18,2 18,5 17,9 18,8 15,8 14,4 13,0 11,6 10,0
20 15,6 16,1 15,8 13,9 12,7 11,9 11,1 9,7
22 13,3 14,1 13,5 12,6 11,5 10,8 10,3 9,1
24 12,2 11,7 11,6 10,4 9,8 9,4 8,6
26 10,7 10,1 10,8 9,5 8,9 8,6 8,0
28 9,4 9,3 9,5 8,4 8,2 7,9 7,6
30 8,7 8,4 7,5 7,4 7,3 7,1
32 8,0 7,4 6,9 6,5 6,5 6,4
34 6,6 6,2 5,7 5,7 5,7
36 5,9 5,9 4,9 5,3 5,3
38 5,5 4,5 5,0 4,9
40 4,9 4,2 4,7 4,4
42 4,4 3,9 4,3 3,9
44 3,6 3,9 3,4
46 3,4 3,4 3,0
48 3,1 2,6
50 2,7 2,3
52 2,0
54 1,7* ov
er r
ear
with
spe
cial
equ
ipm
ent
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne13
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
GROVE GMK 5130FLY JIB DUTIES
Radius Length of main boom — 23,5 t counterweight
(m) 12,9* 12,9 17,6 22,3 27,0 31,6 36,3 41,1 45,8 50,6 55,3 60,02,5 130**/110,0
3 94,5 91,5 86,0 81,0 65,0
4 81,0 77,5 76,5 71,0 65,0 50,0
5 70,5 66,5 67,0 63,5 60,5 49,5 38,0
6 62,0 57,5 58,0 57,0 54,5 47,0 37,0 28,0
7 55,0 50,5 51,0 51,0 49,5 44,0 35,0 28,0 20,5 16,0
8 48,0 44,5 45,0 45,0 41,5 40,0 33,0 28,0 20,5 16,0 11,6
9 39,5 39,0 39,5 38,0 36,5 34,5 31,5 26,5 20,5 16,0 11,6 10,0
10 31,5 31,5 34,5 33,0 32,5 30,0 29,5 25,0 20,5 16,0 11,6 10,0
11 29,0 28,5 28,5 26,5 26,5 23,5 20,5 16,0 11,6 10,0
12 25,0 25,5 25,0 24,5 23,5 22,0 19,5 16,0 11,6 10,0
13 22,5 22,5 22,0 22,5 21,0 19,7 18,6 16,0 11,6 10,0
14 19,9 19,9 19,6 20,5 19,1 17,8 17,2 15,8 11,6 10,0
15 17,7 18,0 18,3 17,4 16,7 15,6 15,2 11,6 10,0
16 16,6 16,8 16,5 15,8 16,0 14,2 14,0 11,6 10,0
18 13,7 13,9 13,5 13,3 13,6 11,9 11,7 11,6 10,0
20 11,6 11,3 11,9 11,4 10,7 9,9 10,0 9,7
22 9,8 9,5 10,1 9,6 9,9 8,5 8,9 8,8
24 6,1 8,1 8,7 8,2 8,5 7,8 8,3 7,6
26 6,9 7,5 7,0 7,3 7,3 7,2 6,6
28 6,0 6,5 6,0 6,3 6,5 6,2 5,7
30 5,7 5,1 5,4 5,7 5,4 4,9
32 5,2 4,5 5,1 4,9 4,6 4,2
34 4,2 4,6 4,3 4,0 3,6
36 3,9 4,0 3,7 3,4 3,0
38 3,5 3,2 2,9 2,5
40 3,1 2,8 2,5 2,1
42 2,7 2,4 2,1 1,7
44 2,0 1,7 1,3
46 1,7 1,4 1,0
48 1,1
50
52
54
56 * ov
er r
ear
with
spe
cial
equ
ipm
ent
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne13
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
GROVE GMK 5130FLY JIB DUTIES
* Lu
ffing
und
er lo
ad
Lifting capacities for lattice extension (hydraulic offset and luffing) — 11m — 40,1 t counterweight 55,3 60,0
Radius 11m 11m (m) 0º 20º 40º *0º - 20° *20º - 40° 0º 20º 40º *0º - 20° *20º - 40°
9 6,6 10 6,6 5,311 6,6 5,3 12 6,6 5,313 6,6 6,6 6,4 5,3 14 6,6 6,6 6,4 5,3 5,3 5,115 6,6 6,6 6,6 6,4 6,4 5,3 5,3 5,116 6,6 6,6 6,6 6,4 6,4 5,3 5,3 5,3 5,1 5,118 6,6 6,6 6,6 6,4 6,4 5,3 5,3 5,3 5,1 5,120 6,6 6,6 6,6 6,4 6,4 5,3 5,3 5,3 5,1 5,122 6,6 6,6 6,6 6,4 6,4 5,3 5,3 5,3 5,1 5,124 6,6 6,6 6,6 6,4 6,4 5,3 5,3 5,3 5,1 5,126 6,4 6,2 6,2 6,2 6,2 5,3 5,3 5,3 5,1 5,128 6,0 5,8 5,8 5,8 5,8 5,3 5,2 5,3 5,1 5,130 5,6 5,5 5,5 5,5 5,5 5,0 5,0 5,0 5,0 5,032 5,3 5,2 5,2 5,2 5,2 4,8 4,7 4,7 4,7 4,734 5,0 4,9 4,9 4,9 4,9 4,5 4,4 4,5 4,4 4,5 36 4,7 4,6 4,7 4,6 4,7 4,2 4,2 4,2 4,2 4,238 4,4 4,4 4,4 4,4 4,4 4,0 4,0 4,0 4,0 4,040 4,1 4,1 4,2 4,1 4,2 3,7 3,7 3,8 3,7 3,842 3,7 3,7 3,9 3,7 3,9 3,5 3,5 3,6 3,5 3,644 3,3 3,3 3,5 3,3 3,5 3,4 3,4 3,4 3,4 3,446 3,0 3,0 3,0 3,0 3,0 3,0 3,0 3,2 3,0 3,248 2,8 2,8 2,9 2,8 2,9 2,7 2,7 2,9 2,7 2,950 2,6 2,7 2,7 2,7 2,7 2,3 2,3 2,5 2,3 2,552 2,4 2,4 2,5 2,4 2,5 2,0 2,0 2,2 2,0 2,254 2,1 2,1 2,1 1,7 1,7 1,8 1,7 1,856 1,9 1,9 1,9 1,4 1,4 1,6 1,4 1,658 1,6 1,6 1,6 1,2 1,2 1,260 1,4 1,4 1,4 1,0 1,0 1,062 1,2
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne13
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
GROVE GMK 5130FLY JIB DUTIES
* Lu
ffing
und
er lo
ad
Lifting capacities for lattice extension (hydraulic offset and luffing) — 11m — 23,5 t counterweight 55,3 60,0
Radius 11m 11m (m) 0º 20º 40º *0º - 20° *20º - 40° 0º 20º 40º *0º - 20° *20º - 40°
9 6,6 10 6,6 5,311 6,6 5,3 12 6,6 5,313 6,6 6,6 6,4 5,3 14 6,6 6,6 6,4 5,3 5,3 5,115 6,6 6,6 6,6 6,4 6,4 5,3 5,3 5,116 6,6 6,6 6,6 6,4 6,4 5,3 5,3 5,3 5,1 5,118 6,6 6,6 6,6 6,4 6,4 5,3 5,3 5,3 5,1 5,120 6,6 6,6 6,6 6,4 6,4 5,3 5,3 5,3 5,1 5,122 6,6 6,6 6,6 6,4 6,4 5,3 5,3 5,3 5,1 5,124 6,6 6,6 6,6 6,4 6,4 5,3 5,3 5,3 5,1 5,126 6,1 6,1 6,2 6,1 6,2 5,3 5,3 5,3 5,1 5,128 5,3 5,3 5,8 5,3 5,8 5,3 5,2 5,3 5,1 5,130 4,9 4,8 5,0 4,8 5,0 4,6 4,6 5,0 4,6 5,032 4,6 4,6 4,6 4,6 4,6 4,0 4,0 4,4 4,0 4,434 4,0 4,0 4,3 4,0 4,3 3,4 3,4 3,8 3,4 3,8 36 3,5 3,5 3,8 3,5 3,8 2,9 2,9 3,3 2,9 3,338 3,0 3,0 3,3 3,0 3,3 2,5 2,5 2,8 2,5 2,840 2,5 2,5 2,8 2,5 2,8 2,0 2,0 2,3 2,0 2,342 2,1 2,1 2,4 2,1 2,4 1,7 1,7 1,9 1,7 1,944 1,8 1,8 2,0 1,8 2,0 1,3 1,3 1,6 1,3 1,646 1,4 1,4 1,6 1,4 1,6 1,0 1,0 1,2 1,0 1,248 1,2 1,2 1,3 1,2 1,3 0,9 0,950 0,9 0,9 1,0 0,9 1,0 52 54 56 58 60 62
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne13
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
GROVE GMK 5130FLY JIB DUTIES
* Lu
ffing
und
er lo
ad
Lifting capacities for lattice extension (hydraulic offset and luffing) — 18m — 40,1 t counterweight 55,3 60,0
Radius 18m 18m (m) 0º 20º 40º *0º - 20° *20º - 40° 0º 20º 40º *0º - 20° *20º - 40°
11 4,1 12 4,1 3,613 4,1 3,6 14 4,1 3,615 4,1 4,0 3,6 16 4,1 4,1 4,0 3,6 18 4,1 4,1 4,0 3,6 3,6 3,320 4,1 4,1 4,0 3,6 3,6 3,3 22 4,1 4,1 4,0 4,0 4,0 3,6 3,6 3,3 24 4,1 4,1 4,0 4,0 4,0 3,6 3,6 3,6 3,3 3,326 4,1 4,1 4,0 4,0 4,0 3,6 3,6 3,6 3,3 3,328 4,1 4,1 4,0 4,0 4,0 3,6 3,6 3,6 3,3 3,330 4,1 4,1 4,0 4,0 4,0 3,6 3,6 3,6 3,3 3,332 4,1 4,1 4,0 4,0 4,0 3,6 3,6 3,6 3,3 3,334 4,1 4,1 3,9 4,0 3,9 3,6 3,6 3,6 3,3 3,336 4,1 4,0 3,9 4,0 3,9 3,6 3,6 3,6 3,3 3,338 3,9 3,8 3,8 3,8 3,8 3,5 3,5 3,6 3,3 3,3 40 3,7 3,7 3,8 3,7 3,8 3,3 3,3 3,5 3,3 3,342 3,5 3,5 3,6 3,5 3,6 3,2 3,2 3,3 3,2 3,344 3,3 3,3 3,4 3,3 3,4 3,0 3,0 3,1 3,0 3,146 3,1 3,1 3,2 3,1 3,2 2,8 2,8 3,0 2,8 3,048 2,8 2,8 3,1 2,8 3,1 2,7 2,7 2,8 2,7 2,850 2,5 2,5 2,8 2,5 2,8 2,5 2,6 2,7 2,6 2,752 2,2 2,3 2,5 2,3 2,5 2,3 2,3 2,5 2,3 2,554 2,1 2,2 2,2 2,2 2,2 2,0 2,0 2,3 2,0 2,356 2,0 2,0 2,0 2,0 2,1 1,7 1,7 2,0 1,7 2,058 1,9 1,9 1,8 1,9 2,0 1,5 1,5 1,7 1,5 1,760 1,6 1,6 1,6 1,8 1,2 1,2 1,5 1,2 1,562 1,4 1,4 1,4 1,0 1,0 1,2 1,0 1,264 1,2 1,2 1,2 66 1,0 1,0 1,068 0,9 0,9 0,9
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne13
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
GROVE GMK 5130FLY JIB DUTIES
* Lu
ffing
und
er lo
ad
Lifting capacities for lattice extension (hydraulic offset and luffing) — 18m — 23,5 t counterweight 55,3 60,0
Radius 18m 18m (m) 0º 20º 40º *0º - 20° *20º - 40° 0º 20º 40º *0º - 20° *20º - 40°
11 4,1 12 4,1 3,613 4,1 3,6 14 4,1 3,615 4,1 4,0 3,6 16 4,1 4,1 4,0 3,6 18 4,1 4,1 4,0 3,6 3,6 3,320 4,1 4,1 4,0 3,6 3,6 3,3 22 4,1 4,1 4,0 4,0 4,0 3,6 3,6 3,3 24 4,1 4,1 4,0 4,0 4,0 3,6 3,6 3,6 3,3 3,326 4,1 4,1 4,0 4,0 4,0 3,6 3,6 3,6 3,3 3,328 4,1 4,1 4,0 4,0 4,0 3,6 3,6 3,6 3,3 3,330 4,1 4,1 4,0 4,0 4,0 3,6 3,6 3,6 3,3 3,332 4,1 4,1 4,0 4,0 4,0 3,6 3,6 3,6 3,3 3,334 3,8 3,8 3,9 3,7 3,9 3,6 3,6 3,6 3,3 3,336 3,6 3,6 3,7 3,6 3,7 3,2 3,2 3,6 3,3 3,338 3,3 3,3 3,5 3,3 3,5 2,7 2,7 3,3 2,7 3,3 40 2,9 2,9 3,4 2,9 3,4 2,3 2,3 2,9 2,3 2,942 2,5 2,5 2,9 2,5 2,9 1,9 1,9 2,5 1,9 2,544 2,1 2,1 2,5 2,1 2,5 1,6 1,6 2,1 1,6 2,146 1,8 1,8 2,1 1,8 2,1 1,3 1,3 1,7 1,3 1,748 1,5 1,5 1,8 1,5 1,8 1,0 1,0 1,4 1,0 1,450 1,2 1,2 1,5 1,2 1,5 1,1 1,152 0,9 0,9 1,2 0,9 1,2 54 1,0 1,05658 606264 6668
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne13
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
GROVE GMK 5130FLY JIB DUTIES
* Lu
ffing
und
er lo
ad
Lifting capacities for lattice extension (hydraulic offset and luffing) — 26m — 40,1 t counterweight 55,3 60,0
Radius 26m 26m (m) 0º 20º 40º *0º - 20° *20º - 40° 0º 20º 40º *0º - 20° *20º - 40°
13 3,1 14 3,1 2,515 3,1 2,5 16 3,1 2,518 3,1 2,5 20 3,1 3,1 3,1 2,5 2,5 2,522 3,1 3,1 3,1 2,5 2,5 2,524 3,1 3,1 3,0 3,1 3,0 2,5 2,5 2,5 26 3,1 3,1 3,0 3,1 3,0 2,5 2,5 2,5 2,5 2,528 3,1 3,1 3,0 3,1 3,0 2,5 2,5 2,5 2,5 2,530 3,1 3,1 3,0 3,1 3,0 2,5 2,5 2,5 2,5 2,532 3,1 3,1 2,9 3,1 2,9 2,5 2,5 2,5 2,5 2,534 3,1 3,1 2,9 3,1 2,9 2,5 2,5 2,5 2,5 2,536 3,1 3,1 2,9 3,1 2,9 2,5 2,5 2,5 2,5 2,538 3,1 3,1 2,9 3,1 2,9 2,5 2,5 2,5 2,5 2,540 3,0 3,0 2,8 3,0 2,8 2,5 2,5 2,5 2,5 2,542 2,9 2,9 2,8 2,9 2,8 2,5 2,5 2,5 2,5 2,5 44 2,7 2,7 2,8 2,7 2,8 2,4 2,5 2,5 2,5 2,546 2,6 2,6 2,7 2,6 2,7 2,3 2,3 2,5 2,3 2,548 2,4 2,5 2,5 2,5 2,5 2,1 2,2 2,3 2,2 2,350 2,3 2,3 2,4 2,3 2,4 2,0 2,1 2,2 2,1 2,252 2,1 2,2 2,3 2,2 2,3 1,9 2,0 2,1 2,0 2,154 1,9 1,9 2,2 1,9 2,2 1,8 1,8 2,0 1,8 2,056 1,6 1,6 1,9 1,6 1,9 1,7 1,7 1,8 1,7 1,858 1,4 1,5 1,6 1,5 1,6 1,5 1,5 1,7 1,5 1,760 1,3 1,4 1,5 1,4 1,5 1,2 1,2 1,5 1,2 1,562 1,2 1,3 1,4 1,3 1,4 1,0 1,0 1,3 1,0 1,364 1,2 1,2 1,3 1,2 1,3 1,0 1,066 1,0 1,0 1,2 1,0 1,2
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne13
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
GROVE GMK 5130FLY JIB DUTIES
* Lu
ffing
und
er lo
ad
Lifting capacities for lattice extension (hydraulic offset and luffing) — 26m — 23,5 t counterweight 55,3 60,0
Radius 26m 26m (m) 0º 20º 40º *0º - 20° *20º - 40° 0º 20º 40º *0º - 20° *20º - 40°
13 3,1 14 3,1 2,515 3,1 2,5 16 3,1 2,518 3,1 2,5 20 3,1 3,1 3,1 2,5 2,5 2,522 3,1 3,1 3,1 2,5 2,5 2,524 3,1 3,1 3,0 3,1 3,0 2,5 2,5 2,5 26 3,1 3,1 3,0 3,1 3,0 2,5 2,5 2,5 2,5 2,528 3,1 3,1 3,0 3,1 3,0 2,5 2,5 2,5 2,5 2,530 3,1 3,1 3,0 3,1 3,0 2,5 2,5 2,5 2,5 2,532 3,1 3,1 2,9 3,1 2,9 2,5 2,5 2,5 2,5 2,534 3,1 3,1 2,9 3,1 2,9 2,5 2,5 2,5 2,5 2,536 3,0 3,0 2,9 3,0 2,9 2,5 2,5 2,5 2,5 2,538 2,8 2,8 2,9 2,8 2,9 2,5 2,5 2,5 2,5 2,540 2,6 2,7 2,8 2,7 2,8 2,2 2,2 2,5 2,2 2,542 2,4 2,4 2,7 2,4 2,7 1,8 1,8 2,4 1,8 2,4 44 2,0 2,0 2,5 2,0 2,5 1,5 1,5 2,0 1,5 2,046 1,7 1,7 2,1 1,7 2,1 1,2 1,2 1,7 1,2 1,748 1,4 1,4 1,8 1,4 1,8 0,9 0,9 1,3 0,9 1,350 1,2 1,2 1,5 1,2 1,5 1,1 1,152 0,9 0,9 1,3 0,9 1,3 54 1,0 1,056 5860626466
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne13
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
GROVE GMK 5130FLY JIB DUTIES
* Lu
ffing
und
er lo
ad
Lifting capacities for lattice extension (hydraulic offset and luffing) — 32m — 40,1 t counterweight 55,3 60,0
Radius 32m 32m (m) 0º 20º 40º *0º - 20° *20º - 40° 0º 20º 40º *0º - 20° *20º - 40°
14 2,4 15 2,4 1,916 2,4 1,9 18 2,4 1,920 2,4 2,4 2,4 1,9 22 2,4 2,4 2,4 1,9 1,9 1,924 2,4 2,4 2,4 1,9 1,9 1,926 2,4 2,4 2,1 2,4 2,1 1,9 1,9 1,7 1,9 1,728 2,4 2,4 2,1 2,4 2,1 1,9 1,9 1,7 1,9 1,730 2,4 2,4 2,1 2,4 2,1 1,9 1,9 1,7 1,9 1,732 2,4 2,4 2,1 2,4 2,1 1,9 1,9 1,7 1,9 1,734 2,4 2,4 2,1 2,4 2,1 1,9 1,9 1,7 1,9 1,736 2,4 2,3 2,0 2,3 2,0 1,9 1,9 1,7 1,9 1,738 2,4 2,3 2,0 2,3 2,0 1,9 1,9 1,7 1,9 1,740 2,4 2,3 2,0 2,3 2,0 1,9 1,9 1,7 1,9 1,742 2,3 2,2 2,0 2,2 2,0 1,9 1,9 1,7 1,9 1,744 2,3 2,2 2,0 2,2 2,0 1,9 1,9 1,7 1,9 1,7 46 2,2 2,1 2,0 2,1 2,0 1,9 1,9 1,7 1,9 1,748 2,1 2,1 2,0 2,1 2,0 1,8 1,9 1,7 1,9 1,750 1,9 2,0 1,9 2,0 1,9 1,7 1,8 1,7 1,8 1,752 1,8 1,9 1,9 1,9 1,9 1,6 1,7 1,7 1,7 1,754 1,7 1,8 1,8 1,8 1,8 1,5 1,5 1,7 1,5 1,756 1,6 1,6 1,7 1,6 1,7 1,3 1,4 1,6 1,4 1,658 1,4 1,4 1,6 1,4 1,6 1,3 1,3 1,4 1,3 1,460 1,1 1,1 1,4 1,1 1,4 1,2 1,2 1,3 1,2 1,362 1,0 1,1 1,2 1,1 1,2 1,0 1,0 1,2 1,0 1,264 0,9 1,0 1,0 1,0 1,0 1,0 1,066 0,9 0,9 0,9 0,9
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne13
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
GROVE GMK 5130FLY JIB DUTIES
* Lu
ffing
und
er lo
ad
Lifting capacities for lattice extension (hydraulic offset and luffing) — 32m — 23,5 t counterweight 55,3 60,0
Radius 32m 32m (m) 0º 20º 40º *0º - 20° *20º - 40° 0º 20º 40º *0º - 20° *20º - 40°
14 2,4 15 2,4 1,916 2,4 1,9 18 2,4 1,920 2,4 2,4 2,4 1,9 22 2,4 2,4 2,4 1,9 1,9 1,924 2,4 2,4 2,4 1,9 1,9 1,926 2,4 2,4 2,1 2,4 2,1 1,9 1,9 1,7 1,9 1,728 2,4 2,4 2,1 2,4 2,1 1,9 1,9 1,7 1,9 1,730 2,4 2,4 2,1 2,4 2,1 1,9 1,9 1,7 1,9 1,732 2,4 2,4 2,1 2,4 2,1 1,9 1,9 1,7 1,9 1,734 2,4 2,4 2,1 2,4 2,1 1,9 1,9 1,7 1,9 1,736 2,4 2,3 2,0 2,3 2,0 1,9 1,9 1,7 1,9 1,738 2,4 2,3 2,0 2,3 2,0 1,9 1,9 1,7 1,9 1,740 2,1 2,1 2,0 2,1 2,0 1,9 1,9 1,7 1,9 1,742 2,1 2,1 2,0 2,1 2,0 1,7 1,7 1,7 1,7 1,744 1,9 1,9 1,9 1,9 1,9 1,4 1,4 1,7 1,4 1,7 46 1,6 1,6 1,9 1,6 1,9 1,1 1,1 1,6 1,1 1,648 1,3 1,3 1,8 1,3 1,8 1,3 1,350 1,1 1,1 1,5 1,1 1,5 1,0 1,052 1,2 1,254 1,0 1,05658 60626466
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne14
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC140-1DIMENSIONS
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne14
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC140-1MAIN BOOM
43t Counterweightm 12,5* 16,8 21,1 25,4 29,7 34,3 38,3 42,6 46,9 51,2 55,5 60,0
t t t t t t t t t t t t140,0**
3 120,0 107,5 99,1 81,9
4 100,5 96,8 86,0 75,4 58,7
5 88,4 85,0 76,3 68,3 55,4 42,3
6 78,3 75,7 68,2 61,7 52,3 40,2 35,2
7 69,4 68,2 60,1 56,4 49,3 38,4 32,7
8 60,2 59,4 55,4 51,1 46,2 36,5 30,2 26,2
9 51,0 51,7 50,9 45,9 43,0 34,9 27,8 24,5 20,4
10 44,8 44,4 42,9 39,9 33,4 25,5 22,9 19,9 16,3
12 33,6 33,2 34,0 33,2 30,5 22,5 19,8 17,8 15,5 12,2 9,3
14 25,1 27,2 26,8 27,4 26,9 19,6 17,6 15,8 14,3 11,8 9,2
16 22,3 22,1 22,6 21,9 17,4 15,5 14,2 13,1 11,4 8,8
18 16,7 19,4 18,9 18,3 16,3 13,8 12,7 11,9 10,8 8,3
20 16,6 16,2 15,5 15,1 12,6 11,3 10,7 10,0 7,8
22 14,4 14,0 13,4 13,9 11,3 10,4 9,6 9,1 7,3
24 12,2 12,1 12,1 10,3 9,4 8,9 8,3 6,9
26 10,8 11,2 10,7 9,6 8,5 8,2 7,6 6,4
28 10,0 9,5 9,0 7,7 7,4 7,1 5,9
30 9,0 8,4 8,5 7,2 6,7 6,5 5,5
32 7,5 7,7 6,7 6,2 6,0 5,1
34 6,9 6,9 6,3 5,8 5,4 4,8
36 3,7 6,2 5,9 5,4 5,1 4,4
38 5,6 5,5 5,0 4,7 4,0
40 3,6 5,0 4,7 4,4 3,8
42 4,5 4,3 3,9 3,5
44 2,7 3,8 3,5 3,2
46 2,5 3,4 3,0 3,0
48 2,6 2,7 2,6
50 2,5 2,3 2,3
52 2,0
54 1,7
* over rear** Capacity class
12,5-60m 7,20x7,00m 360° 43t
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne14
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC140-1MAIN BOOM
32,5t Counterweightm 12,5 16,8 21,1 25,4 29,7 34,3 38,3 42,6 46,9 51,2 55,5 60,0
t t t t t t t t t t t t
3 120,0 107,5 99,1 81,9 - - - - - - - -
4 100,5 96,8 86,0 75,4 58,7 - - - - - - -
5 88,1 85,0 76,3 68,3 55,4 42,3 - - - - - -
6 76,8 75,7 68,2 61,7 52,3 40,2 35,2 - - - - -
7 64,5 64,3 60,1 56,4 49,3 38,4 32,7 - - - - -
8 54,3 53,9 53,6 49,5 46,2 36,5 30,2 26,2 - - - -
9 44,2 44,7 44,3 43,1 41,3 34,9 27,8 24,5 20,4 - - -
10 - 37,5 37,1 38,0 36,2 33,4 25,5 22,9 19,9 16,3 - -
12 - 28,6 28,7 28,3 29,1 28,4 22,5 19,8 17,8 15,5 12,2 9,3
14 - 20,4 22,6 23,4 22,9 22,2 19,6 17,6 15,8 14,3 11,8 9,2
16 - - 19,2 19,1 18,7 18,0 17,4 15,5 14,2 13,1 11,4 8,8
18 - - 13,3 16,0 15,5 15,2 15,5 13,8 12,7 11,9 10,8 8,3
20 - - - 13,6 13,2 13,7 13,1 12,3 11,3 10,7 10,0 7,8
22 - - - 11,8 11,6 11,8 11,2 11,2 10,4 9,6 9,1 7,3
24 - - - - 10,7 10,3 9,7 10,0 9,2 8,9 8,3 6,9
26 - - - - 9,5 9,0 8,9 8,7 8,2 7,8 7,6 6,4
28 - - - - - 8,0 8,1 7,6 7,6 7,2 7,1 5,9
30 - - - - - 7,1 7,2 6,7 6,6 6,5 6,1 5,5
32 - - - - - - 6,4 6,0 5,8 5,7 5,3 5,1
34 - - - - - - 5,7 5,4 4,9 4,6 4,6 5,7
36 - - - - - - 3,7 5,0 4,7 4,3 3,9 3,9
38 - - - - - - - 4,5 4,2 3,7 3,4 3,4
40 - - - - - - - 3,6 3,7 3,3 2,9 2,9
42 - - - - - - - - 3,3 2,9 2,5 2,4
44 - - - - - - - - 2,7 2,5 2,1 2,0
46 - - - - - - - - 2,5 2,1 1,7 1,7
48 - - - - - - - - - 1,8 1,4 1,4
50 - - - - - - - - - 1,5 1,1 1,1
52 - - - - - - - - - - - 0,8
12,5-60m 7,20x7,00m 360° 32,5t
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne14
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC140-1MAIN BOOM
27,2t Counterweightm 12,5 16,8 21,1 25,4 29,7 34,3 38,3 42,6 46,9 51,2 55,5 60,0
t t t t t t t t t t t t
3 120,0 107,5 99,1 81,9
4 100,5 96,8 86,0 75,4 58,7
5 87,7 85,0 76,3 68,3 55,4 42,3
6 74,1 73,9 68,2 61,7 52,3 40,2 35,2
7 61,8 61,6 58,2 53,4 49,3 38,4 32,7
8 49,0 49,6 48,6 46,6 43,3 36,5 30,2 26,2
9 39,8 40,3 40,1 40,2 37,3 34,9 27,8 24,5 20,4
10 34,5 34,6 34,2 33,5 32,2 25,5 22,9 19,9 16,3
12 26,2 25,8 26,7 26,2 25,5 22,5 19,8 17,8 15,5 12,2 9,3
14 18,1 21,1 21,0 20,6 19,9 19,4 17,6 15,8 14,3 11,8 9,2
16 17,2 17,1 16,7 16,7 16,6 15,5 14,2 13,1 11,4 8,8
18 11,5 14,2 13,9 14,4 13,8 13,1 12,7 11,9 10,8 8,3
20 12,1 12,6 12,2 11,5 11,8 10,9 10,7 10,0 7,8
22 10,3 10,8 10,4 10,3 10,0 9,7 9,1 9,1 7,3
24 9,4 9,0 9,1 8,6 8,6 8,4 8,1 6,9
26 8,2 7,9 8,0 7,6 7,4 7,3 6,9 6,4
28 7,4 7,0 7,0 6,7 6,3 5,9 5,9
30 6,6 6,1 6,1 5,8 5,4 5,0 5,0
32 5,5 5,3 5,0 4,6 4,3 4,2
34 5,1 4,7 4,4 4,0 3,6 3,6
36 3,7 4,1 3,8 3,4 3,0 3,0
38 3,7 3,4 2,9 2,5 2,5
40 3,3 2,9 2,5 2,1 2,1
42 2,5 2,1 1,7 1,7
44 2,2 1,7 1,3 1,3
46 1,9 1,4 1,0 1,0
48 1,1 0,7
50 0,9
12,5-60m 7,20x7,00m 360° 27,2t
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne14
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC140-1MAIN BOOM
22,8t Counterweightm 12,5 16,8 21,1 25,4 29,7 34,3 38,3 42,6 46,9 51,2 55,5 60,0
t t t t t t t t t t t t
3 120,0 107,5 99,1 81,9
4 100,5 96,8 86,0 75,4 58,7
5 87,3 85,0 76,3 68,3 55,4 42,3
6 71,5 71,1 65,4 59,9 52,3 40,2 35,2
7 57,4 57,7 53,4 50,3 46,9 38,4 32,7
8 44,7 45,2 44,4 42,9 39,6 36,5 30,2 26,2
9 36,2 37,5 37,7 36,8 35,6 33,5 27,8 24,5 20,4
10 31,4 31,5 31,6 31,6 29,4 25,5 22,9 19,9 16,3
12 23,8 24,4 24,3 23,8 23,1 21,9 19,8 17,8 15,5 12,2 9,3
14 16,1 19,1 19,1 18,6 18,2 18,6 16,9 15,8 14,3 11,8 9,2
16 15,5 15,4 15,0 15,6 14,9 14,3 13,6 13,1 11,4 8,8
18 9,9 12,7 13,3 12,8 12,4 12,5 11,9 11,3 10,8 8,3
20 11,1 11,2 10,8 11,0 10,4 10,4 10,0 9,8 7,8
22 9,8 9,6 9,4 9,3 9,0 9,0 8,7 8,3 7,3
24 8,3 8,4 8,0 8,0 7,7 7,3 7,0 6,7
26 7,2 7,3 7,0 6,9 6,6 6,2 5,8 5,7
28 6,4 6,3 6,0 5,7 5,3 4,9 4,8
30 5,7 5,5 5,2 4,9 4,5 4,1 4,1
32 4,8 4,6 4,3 3,8 3,4 3,4
34 4,2 4,0 3,7 3,2 2,8 2,8
36 3,7 3,5 3,1 2,7 2,3 2,3
38 3,0 2,7 2,2 1,8 1,8
40 2,6 2,3 1,8 1,4 1,4
42 1,9 1,4 1,1 1,0
44 1,6 1,1 0,7 0,7
46 1,3 0,8
12,5-60m 7,20x7,00m 360° 22,8t
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne14
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC140-1MAIN BOOM
10,8t Counterweightm 12,5 16,8 21,1 25,4 29,7 34,3 38,3 42,6 46,9 51,2 55,5 60,0
t t t t t t t t t t t t
3 119,5 107,5 99,1 81,9
4 100,5 96,8 86,0 75,4 58,7
5 80,1 71,7 65,5 58,3 54,4 42,3
6 59,4 55,0 51,4 47,5 43,0 40,2 35,2
7 42,9 44,5 41,7 39,0 37,4 34,2 31,8
8 33,1 34,8 34,6 33,8 31,5 28,9 27,1 25,2
9 26,6 28,6 29,2 29,0 27,0 25,3 23,5 22,1 20,4
10 23,7 24,3 24,3 23,2 22,4 20,9 19,1 18,4 16,3
12 17,0 17,6 17,5 18,2 17,7 16,9 15,8 15,2 13,6 12,2 9,3
14 10,2 13,7 14,2 14,0 13,9 13,8 13,4 12,6 11,6 10,7 9,2
16 11,0 11,3 11,2 11,3 11,2 10,9 10,3 9,4 8,6 8,3
18 7,8 9,2 9,4 9,2 9,1 8,8 8,5 7,7 7,0 6,7
20 7,7 7,8 7,8 7,6 7,4 6,9 6,3 5,6 5,3
22 6,5 6,6 6,5 6,4 6,1 5,7 5,1 4,4 4,1
24 5,7 5,5 5,3 5,0 4,7 4,1 3,5 3,2
26 4,8 4,6 4,4 4,2 3,8 3,3 2,7 2,5
28 3,9 3,7 3,4 3,1 2,6 2,1 1,8
30 3,3 3,1 2,8 2,5 2,0 1,5 1,3
32 2,6 2,3 1,9 1,5 1,0 0,8
34 2,1 1,8 1,5 1,0
36 1,7 1,4 1,1
38 1,1 0,7
40 0,8
12,5-60m 7,20x7,00m 360° 10,8t
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne14
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC140-1MAIN BOOM
8,2t Counterweightm 12,5 16,8 21,1 25,4 29,7 34,3 38,3 42,6 46,9 51,2 55,5 60,0
t t t t t t t t t t t t
3 119,0 107,5 99,1 81,9
4 100,0 96,8 82,7 74,2 58,7
5 75,9 68,2 61,1 56,8 50,7 42,3
6 55,2 51,3 48,3 44,3 42,4 38,5 35,2
7 39,7 41,4 38,8 37,6 34,8 31,7 29,7
8 30,5 32,8 33,4 31,5 29,3 27,2 24,7 23,5
9 24,3 26,4 27,1 26,8 24,6 23,5 22,0 20,1 18,8
10 21,6 22,3 22,2 21,3 20,9 19,1 18,5 17,1 15,6
12 15,4 16,0 16,8 16,6 16,0 15,7 15,0 14,1 13,0 12,0 9,3
14 8,9 12,6 12,9 12,8 12,9 12,6 12,0 11,2 10,3 9,4 9,0
16 10,0 10,2 10,4 10,2 10,1 9,8 9,1 8,2 7,5 7,2
18 7,8 8,4 8,4 8,4 8,2 8,0 7,4 6,6 5,9 5,6
20 6,9 7,1 6,9 6,8 6,5 6,0 5,3 4,6 4,2
22 5,8 5,9 5,7 5,6 5,3 4,8 4,1 3,5 3,2
24 4,9 4,7 4,6 4,3 3,9 3,2 2,6 2,4
26 4,1 3,9 3,8 3,5 3,1 2,5 1,9 1,7
28 3,2 3,1 2,8 2,4 1,9 1,3 1,1
30 2,7 2,5 2,2 1,9 1,3 0,8
32 2,0 1,7 1,4 0,9
34 1,6 1,3 1,0
36 1,2 0,9
12,5-60m 7,20x7,00m 360° 8,2t
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne14
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC140-1MAIN BOOM
6,3t Counterweightm 12,5 16,8 21,1 25,4 29,7 34,3 38,3 42,6 46,9 51,2 55,5 60,0
t t t t t t t t t t t t
3 119,0 107,5 99,1 81,9
4 99,5 92,7 79,3 70,3 58,7
5 72,0 64,7 57,9 53,9 48,0 42,3
6 52,2 49,3 45,8 41,9 40,2 36,4 33,6
7 37,5 39,2 36,7 35,6 32,9 30,5 27,7 22,5
8 28,8 31,0 31,6 29,8 27,4 25,9 24,2 21,8 18,2
9 22,6 24,7 25,4 25,0 22,9 22,7 20,7 19,9 18,0
10 20,2 20,8 20,8 21,2 19,5 18,9 17,2 16,7 14,3
12 14,4 15,4 15,7 15,6 15,7 14,6 14,0 13,0 11,9 11,0 9,3
14 7,9 11,7 12,0 12,2 12,0 12,0 11,1 10,3 9,4 8,6 8,2
16 9,2 9,6 9,6 9,6 9,4 9,0 8,3 7,4 6,6 6,3
18 7,6 7,7 7,9 7,8 7,6 7,3 6,7 5,9 5,1 4,7
20 6,3 6,5 6,4 6,2 5,9 5,3 4,5 3,8 3,5
22 5,2 5,4 5,2 5,0 4,7 4,2 3,5 2,8 2,5
24 4,4 4,2 4,0 3,7 3,3 2,6 2,0 1,8
26 3,6 3,4 3,3 3,0 2,6 2,0 1,4 1,1
28 2,8 2,6 2,3 2,0 1,4 0,8
30 2,3 2,1 1,8 1,4 0,9
32 1,6 1,3 1,0
34 1,2 0,9
36 0,9
12,5-60m 7,20x7,00m 360° 6,3t
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne14
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC140-1MAIN BOOM
0t Counterweightm 12,5 16,8 21,1 25,4 29,7 34,3 38,3 42,6 46,9 51,2 55,5 60,0
t t t t t t t t t t t t
3 118,0 107,5 98,8 80,7
4 90,5 77,1 64,0 56,6 48,7
5 58,9 53,6 47,3 43,8 37,9 34,2
6 37,8 40,5 37,1 33,2 29,9 27,8 25,1
7 26,6 29,2 29,0 26,3 25,3 22,8 21,3 19,8
8 19,6 21,8 22,5 22,8 21,0 19,9 18,5 16,8 14,8
9 15,1 17,0 18,2 18,6 18,3 16,9 15,8 14,3 13,0
10 13,8 14,9 15,2 15,4 14,6 13,6 12,2 11,1 9,7
12 9,5 10,7 10,9 11,1 10,9 10,2 9,2 8,3 7,2 6,3 5,8
14 4,3 7,8 8,1 8,3 8,1 7,9 7,0 6,3 5,3 4,5 4,2
16 5,9 6,1 6,3 6,2 6,0 5,4 4,8 3,9 3,2 2,9
18 4,6 4,8 5,0 4,8 4,7 4,2 3,6 2,8 2,2 2,0
20 3,8 3,9 3,8 3,6 3,3 2,7 2,0 1,4 1,1
22 3,0 3,1 3,0 2,9 2,5 1,9 1,3
24 2,5 2,4 2,2 1,9 1,3
26 2,0 1,8 1,6 1,3 0,8
28 1,3 1,1 0,8
30 0,9
12,5-60m 7,20x7,00m 360° 0t
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne14
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC140-1MAIN BOOM
40,4t Counterweightm 12,5 16,8 21,1 25,4 29,7 34,3 38,3 42,6 46,9 51,2 55,5 60,0
t t t t t t t t t t t t
3 115,0 107,5 99,1 81,9
4 95,6 95,4 86,0 75,4 58,7
5 81,4 81,2 76,3 68,3 55,4 42,3
6 69,2 68,8 65,4 60,1 52,3 40,2 35,2
7 52,1 52,6 52,3 50,3 47,5 38,4 32,7
8 41,4 41,9 42,8 42,4 40,6 36,5 30,2 26,2
9 34,1 35,2 35,3 35,0 35,6 34,5 27,8 24,5 20,4
10 30,3 29,9 30,8 30,3 29,7 25,5 22,9 19,9 16,3
12 23,0 23,4 23,4 22,9 22,3 21,9 19,8 17,8 15,5 12,2 9,3
14 16,0 18,6 18,6 18,2 18,2 18,1 17,1 15,8 14,3 11,8 9,2
16 15,3 15,2 15,0 15,3 14,8 14,3 14,0 13,1 11,4 8,8
18 10,4 12,7 13,2 12,8 12,4 12,5 12,0 11,7 10,8 8,3
20 11,1 11,3 10,9 11,1 10,6 10,4 10,0 10,0 7,8
22 9,9 9,8 9,4 9,6 9,1 9,1 9,0 8,7 7,3
24 8,5 8,6 8,3 8,2 8,1 7,8 7,5 6,9
26 7,5 7,6 7,3 7,3 7,1 6,7 6,5 6,4
28 6,8 6,5 6,4 6,2 5,9 5,6 5,6
30 6,1 5,9 5,7 5,5 5,2 4,9 4,9
32 5,3 5,1 4,8 4,6 4,3 4,2
34 4,8 4,5 4,3 4,0 3,7 3,7
36 3,7 4,0 3,8 3,5 3,2 3,2
38 3,7 3,4 3,1 2,8 2,8
40 3,3 3,1 2,7 2,4 2,4
42 2,7 2,4 2,0 2,0
44 2,4 2,0 1,6 1,6
46 2,1 1,7 1,3 1,3
48 1,4 1,0 1,0
50 1,1 0,7 0,7
12,5-60m 7,20x5,30m 360° 40,4t
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne14
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC140-1MAIN BOOM
22,8t Counterweightm 12,5 16,8 21,1 25,4 29,7 34,3 38,3 42,6 46,9 51,2 55,5 60,0
t t t t t t t t t t t t
3 106,0 105,5 85,5 73,9
4 82,4 71,8 62,1 56,5 49,0
5 53,4 53,6 48,9 45,3 41,2 37,3
6 37,7 39,9 39,7 37,2 33,8 31,0 29,1
7 28,7 30,6 31,2 31,0 28,3 26,6 24,8 22,5
8 22,8 24,5 25,1 25,0 24,8 23,6 22,0 20,6 18,2
9 18,7 20,3 20,8 21,0 21,4 20,6 19,9 18,3 17,2
10 17,1 17,8 18,3 18,2 18,1 17,6 16,8 15,7 14,2
12 12,8 13,6 13,8 14,0 13,9 13,8 13,5 12,6 11,5 10,6 9,3
14 7,8 10,7 11,0 11,1 11,0 10,9 10,6 10,3 9,4 8,6 8,2
16 8,7 8,9 9,1 8,9 8,8 8,6 8,3 7,7 7,0 6,7
18 7,2 7,4 7,5 7,4 7,3 7,1 6,8 6,3 5,7 5,4
20 6,2 6,3 6,2 6,1 5,9 5,6 5,2 4,6 4,4
22 5,2 5,4 5,2 5,1 4,9 4,6 4,2 3,7 3,5
24 4,6 4,4 4,3 4,1 3,9 3,5 3,0 2,8
26 3,9 3,8 3,7 3,5 3,2 2,8 2,3 2,2
28 3,3 3,1 2,9 2,7 2,3 1,8 1,6
30 2,8 2,7 2,5 2,2 1,7 1,3 1,1
32 2,3 2,0 1,7 1,3 0,9
34 1,9 1,6 1,3 0,9
36 1,5 1,3 0,9
38 0,9
12,5-60m 7,20x4,50m 360° 22,8t
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne14
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC140-1TELESCOPING CAPACITIES
360°m 16,8 21,1 25,4 29,7 34,3 38,3 42,6 46,9 51,2 55,5
t t t t t t t t t t
3 37,9 35,0 32,0
4 37,3 34,1 30,5 29,9
5 36,8 33,2 29,6 28,8 26,9
6 36,5 32,5 28,7 26,6 25,7 23,8
7 35,0 30,8 27,9 25,5 24,8 21,7
8 35,0 30,2 27,2 24,8 22,9 20,9 20,2
9 34,3 28,5 26,6 24,3 21,8 20,1 19,5 16,9
10 33,6 28,2 26,0 24,3 20,4 19,5 18,8 16,5 12,8
12 33,5 27,8 25,0 21,4 18,7 18,3 16,8 14,9 12,2 7,1
14 25,1 26,1 22,1 20,5 17,7 17,0 15,1 13,3 11,6 6,3
16 22,3 21,6 19,8 16,9 15,7 13,4 12,1 10,8 5,5
18 16,7 18,3 18,9 15,1 14,6 12,0 10,9 9,9 4,9
20 16,5 16,2 14,6 13,6 11,0 9,8 9,0 4,3
22 14,4 14,0 13,4 12,6 10,1 9,0 8,1 3,8
24 12,2 11,6 11,9 9,3 8,3 7,6 3,3
26 10,8 10,2 10,7 8,6 7,6 7,0 2,3
28 9,7 9,5 8,1 6,9 6,5 1,5
30 9,0 8,4 7,6 6,5 5,9 0,9
32 7,5 7,1 6,1 5,5
34 6,7 6,8 5,7 5,2
36 6,2 5,3 4,9
38 5,6 5,1 4,5
40 3,2 4,8 4,2
42 4,5 4,0
44 3,7
46 3,4
48 2,4
50 2,2
16,8-55,5m 360°
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne14
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC140-1HAV
43t Counterweight12,5m
9,1m 17,0m0° 20° 40° 0° 20° 40°
m t t t t t t3 16,2 10,6
4 16,2 9,8
5 15,4 11,5 9,1
6 14,4 10,8 8,4
7 13,4 10,2 7,8
8 12,6 9,7 7,8 7,3
9 11,7 9,3 7,5 6,8 5,5
10 10,9 8,9 7,3 6,4 5,2
12 9,7 8,2 6,8 5,8 4,8
14 8,7 7,6 6,4 5,2 4,4 3,8
16 8,0 7,2 6,3 4,7 4,0 3,5
18 7,4 7,2 4,3 3,8 3,4
20 3,9 3,5 3,2
22 3,6 3,3 3,1
24 3,4 3,2 3,1
26 3,1
43t Counterweight51,2m
9,1m 17,0m0° 20° 40° 0° 20° 40°
m t t t t t t12 10,2
14 9,9 5,6
16 9,5 8,0 5,4
18 9,2 7,7 6,5 5,1
20 8,7 7,5 6,4 4,9 4,0
22 8,1 7,5 6,3 4,7 3,8
24 7,5 6,9 6,2 4,5 3,7 3,1
26 6,9 6,6 6,1 4,4 3,5 3,1
28 6,3 6,3 6,0 4,2 3,4 3,0
30 5,9 5,9 5,9 4,0 3,3 2,9
32 5,4 5,5 5,6 3,9 3,2 2,9
34 5,0 5,1 5,2 3,7 3,1 2,8
36 4,5 4,7 4,8 3,6 3,1 2,8
38 4,1 4,3 4,4 3,5 3,0 2,7
40 3,9 3,9 4,0 3,4 2,9 2,7
42 3,6 3,6 3,7 3,2 2,9 2,7
44 3,4 3,4 3,4 3,1 2,8 2,7
46 3,1 3,2 3,2 2,9 2,7 2,7
48 2,8 2,9 3,0 2,7 2,6 2,6
50 2,4 2,5 2,6 2,5 2,5 2,5
52 2,1 2,2 1,6 2,3 2,3 2,4
54 1,8 1,9 1,5 2,0 2,2 2,2
56 1,4 1,4 1,8 2,0 2,1
58 1,2 1,2 1,5 1,7 1,8
60 1,3 1,4 1,0
62 1,1 1,2 0,9
64 0,8 0,8
12,5m 9,1-17,0m 360° 43t
0°-40°
51,2m 9,1-17,0m 360° 43t
0°-40°
7,20x7,00m 7,20x7,00m
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne14
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC140-1HAV
43t Counterweight55,5m
9,1m 17,0m0° 20° 40° 0° 20° 40°
m t t t t t t14 7,7 5,1
16 7,4 4,9
18 7,2 7,0 4,7
20 7,0 6,8 6,2 4,6 3,8
22 6,7 6,5 6,1 4,4 3,7
24 6,4 6,3 6,0 4,3 3,5
26 6,1 6,0 5,9 4,1 3,4 3,0
28 5,9 5,8 5,6 4,0 3,3 2,9
30 5,6 5,5 5,4 3,8 3,2 2,9
32 5,2 5,2 5,2 3,7 3,2 2,8
34 4,8 4,9 4,9 3,6 3,1 2,8
36 4,5 4,5 4,6 3,4 3,0 2,7
38 4,1 4,2 4,2 3,3 2,9 2,7
40 3,7 3,8 3,9 3,1 2,8 2,7
42 3,4 3,5 3,6 3,0 2,8 2,6
44 3,2 3,2 3,3 2,9 2,7 2,6
46 2,8 3,0 3,1 2,7 2,6 2,6
48 2,4 2,6 2,7 2,5 2,6 2,5
50 2,0 2,2 2,3 2,3 2,5 2,5
52 1,7 1,9 1,9 1,9 2,3 2,3
54 1,4 1,6 1,6 1,7 2,0 2,2
56 1,2 1,3 1,4 1,7 1,8
58 0,9 1,0 1,1 1,4 1,5
60 0,9 1,1 1,2
62 0,9 0,9
43t Counterweight60,0m
9,1m 17,0m0° 20° 40° 0° 20° 40°
m t t t t t t14 6,0
16 6,0 3,9
18 5,9 5,7 3,9
20 5,6 5,5 5,4 3,8
22 5,4 5,3 5,2 3,7 3,5
24 5,2 5,1 5,0 3,6 3,4
26 4,9 4,9 4,8 3,5 3,3 2,9
28 4,6 4,6 4,6 3,5 3,2 2,8
30 4,4 4,4 4,4 3,3 3,1 2,8
32 4,1 4,2 4,2 3,2 3,0 2,7
34 3,8 3,9 4,0 3,1 2,9 2,7
36 3,6 3,7 3,8 3,0 2,8 2,6
38 3,3 3,4 3,5 2,8 2,7 2,6
40 3,1 3,2 3,3 2,6 2,6 2,5
42 2,8 2,9 3,0 2,4 2,5 2,5
44 2,5 2,7 2,7 2,3 2,3 2,4
46 2,3 2,4 2,5 2,1 2,2 2,3
48 2,2 2,2 2,3 1,9 2,0 2,1
50 1,9 2,1 2,1 1,7 1,9 2,0
52 1,6 1,8 1,9 1,6 1,7 1,7
54 1,3 1,5 1,6 1,5 1,6 1,7
56 1,1 1,2 1,2 1,3 1,5 1,5
58 0,8 0,9 1,0 1,0 1,3 1,4
60 0,8 1,0 1,2
62 0,8 0,9
55,5m 9,1-17,0m 360° 43t
0°-40°
60,0m 9,1-17,0m 360° 43t
0°-40°
7,20x7,00m 7,20x7,00m
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne14
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC140-1HAV
6,3t Counterweight12,5m
9,1m 17,0m0° 20° 40° 0° 20° 40°
m t t t t t t3 16,2 10,6
4 16,2 9,8
5 15,4 11,5 9,1
6 14,4 10,8 8,4
7 13,4 10,2 7,8
8 12,6 9,7 7,8 7,3
9 11,7 9,3 7,5 6,8 5,5
10 10,9 8,9 7,3 6,4 5,2
12 9,7 8,2 6,8 5,8 4,8
14 8,7 7,6 6,4 5,2 4,4 3,8
16 8,0 7,2 6,3 4,7 4,0 3,5
18 7,4 7,2 4,3 3,8 3,4
20 3,9 3,5 3,2
22 3,6 3,3 3,1
24 3,4 3,2 3,1
26 3,1
6,3t Counterweight51,2m
9,1m 17,0m0° 20° 40° 0° 20° 40°
m t t t t t t12 10,2
14 8,3 5,6
16 6,8 7,8 5,4
18 5,3 6,2 6,5 5,0
20 4,1 5,0 5,6 4,0 4,0
22 3,0 3,8 4,5 3,0 3,8
24 2,2 2,9 3,5 2,2 3,5 3,1
26 1,5 2,1 2,6 1,6 2,7 3,1
28 1,0 1,5 1,9 1,0 2,0 2,9
30 1,0 1,4 1,4 2,3
32 0,9 1,0 1,7
34 1,2
36 0,8
6,3t Counterweight55,5m
9,1m 17,0m0° 20° 40° 0° 20° 40°
m t t t t t t14 7,7 5,1
16 6,0 4,9
18 4,6 5,6 4,5
20 3,4 4,3 5,1 3,3 3,8
22 2,4 3,2 3,9 2,3 3,7
24 1,6 2,3 2,9 1,5 2,9
26 0,9 1,6 2,1 0,9 2,1 3,0
28 1,0 1,4 1,5 2,4
30 0,9 0,9 1,8
32 1,3
34 0,8
6,3t Counterweight60,0m
9,1m 17,0m0° 20° 40° 0° 20° 40°
m t t t t t t14 6,0
16 5,7 3,9
18 4,1 5,2 3,9
20 2,9 3,9 4,7 2,8
22 2,0 2,8 3,5 1,9
24 1,2 2,0 2,6 1,1
26 1,2 1,8
28 1,2
12,5m 9,1-17,0m 360° 6,3t
0°-40°
51,2m 9,1-17,0m 360° 6,3t
0°-40°
55,5m 9,1-17,0m 360° 6,3t
0°-40°
60,0m 9,1-17,0m 360° 6,3t
0°-40°
7,20x7,00m 7,20x7,00m
7,20x7,00m 7,20x7,00m
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne14
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC140-1HAV-VA
43t Counterweight12,5m
25,0m 33,0m0° 20° 40° 0° 20° 40°
m t t t t t t5 9,0
6 8,5
7 8,0 7,4
8 7,6 6,9
9 7,2 6,5
10 6,9 6,1
12 6,3 4,9 5,3
14 5,7 4,6 4,8 4,4
16 5,2 4,3 3,6 4,3 4,0
18 4,8 4,0 3,5 3,8 3,6 3,5
20 4,4 3,8 3,4 3,5 3,3 3,2
22 4,0 3,6 3,2 3,2 3,0 2,9
24 3,7 3,4 3,2 2,8 2,8 2,7
26 3,5 3,3 3,1 2,6 2,5 2,5
28 3,2 3,1 3,0 2,4 2,3 2,3
30 3,0 2,9 2,9 2,2 2,1 2,2
32 2,8 2,8 2,9 2,0 2,0 2,0
34 1,8 1,9 1,9
36 1,7 1,7 1,8
38 1,6 1,6 1,7
40 1,5 1,5
43t Counterweight51,2m
25,0m 33,0m0° 20° 40° 0° 20° 40°
m t t t t t t16 4,4
18 4,4 2,9
20 4,3 2,9
22 4,2 3,6 2,9
24 4,1 3,5 2,8
26 3,9 3,4 2,9 2,7 2,6
28 3,8 3,3 2,9 2,7 2,5
30 3,7 3,2 2,8 2,6 2,4 2,3
32 3,6 3,1 2,8 2,5 2,3 2,2
34 3,5 3,0 2,8 2,4 2,2 2,1
36 3,3 3,0 2,7 2,3 2,1 2,0
38 3,1 2,9 2,7 2,1 2,0 1,9
40 2,9 2,8 2,7 2,0 1,9 1,9
42 2,7 2,7 2,6 1,9 1,8 1,8
44 2,5 2,5 2,5 1,8 1,8 1,8
46 2,3 2,4 2,4 1,7 1,7 1,7
48 2,1 2,2 2,3 1,6 1,6 1,6
50 2,0 2,1 2,1 1,5 1,5 1,5
52 1,8 1,9 2,0 1,4 1,4 1,5
54 1,6 1,8 1,8 1,3 1,3 1,4
56 1,5 1,6 1,7 1,2 1,3 1,
58 1,4 1,4 1,5 0,9 1,2 1,2
60 1,1 1,3 1,4 0,8 1,0 1,1
62 0,9 1,1 1,2 0,7 0,8 0,9
64 0,7 0,9 1,0 0,7
66 0,7 0,7
12,5m 25-33m 360° 43t
0°-40°
51,2m 25-33m 360° 43t
0°-40°
7,20x7,00m 7,20x7,00m
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne14
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC140-1HAV-VA
43t Counterweight55,5m
25,0m 33,0m0° 20° 40° 0° 20° 40°
m t t t t t t16 3,4
18 3,3
20 3,3 2,0
22 3,2 2,0
24 3,1 3,1 1,9
26 3,0 3,0 1,9 1,9
28 2,9 2,9 2,8 1,8 1,8
30 2,8 2,8 2,7 1,7 1,8 1,8
32 2,7 2,6 2,6 1,7 1,7 1,7
34 2,6 2,6 2,6 1,6 1,6 1,7
36 2,5 2,5 2,5 1,5 1,5 1,6
38 2,4 2,4 2,4 1,5 1,5 1,5
40 2,3 2,3 2,3 1,4 1,4 1,5
42 2,2 2,2 2,2 1,3 1,4 1,4
44 2,1 2,1 2,1 1,3 1,3 1,3
46 2,0 2,0 2,0 1,2 1,2 1,3
48 1,9 1,9 1,9 1,2 1,2 1,2
50 1,8 1,8 1,8 1,1 1,1 1,2
52 1,6 1,7 1,8 1,1 1,1 1,1
54 1,5 1,6 1,7 1,0 1,0 1,1
56 1,3 1,5 1,6 0,9 1,0 1,0
58 1,0 1,3 1,4 0,9 0,9 1,0
60 0,8 1,1 1,3 0,7 0,9 0,9
62 0,8 1,0 0,8 0,9
64 0,7 0,7
43t Counterweight60,0m
25,0m 33,0m0° 20° 40° 0° 20° 40°
m t t t t t t18 2,4
20 2,4 1,2
22 2,4 1,2
24 2,3 1,2
26 2,3 2,2 1,2 1,2
28 2,2 2,2 1,2 1,2
30 2,2 2,1 2,1 1,1 1,2
32 2,1 2,0 2,0 1,1 1,2 1,2
34 2,0 1,9 1,9 1,1 1,1 1,2
36 1,9 1,8 1,8 1,0 1,1 1,1
38 1,8 1,8 1,8 1,0 1,0 1,1
40 1,7 1,7 1,7 0,9 0,9 1,0
42 1,6 1,6 1,6 0,8 0,9 0,9
44 1,5 1,5 1,5 0,8 0,8 0,9
46 1,4 1,4 1,5 0,7 0,8 0,8
48 1,3 1,3 1,4 0,7 0,8
50 1,2 1,2 1,3 0,7
52 1,0 1,1 1,2
54 0,9 1,0 1,1
56 0,8 0,9 1,0
58 0,8 0,9
60 0,7 0,8
55,5m 25-33m 360° 43t
0°-40°
60,0m 25-33m 360° 43t
0°-40°
7,20x7,00m 7,20x7,00m
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne14
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC140-1MS
43t Counterweightm 12,5 16,8 21,1 25,4 29,7 34,3 38,3 42,6 46,9 51,2 55,5 60,0
t t t t t t t t t t t t
3 32,0 32,0 32,0
4 32,0 32,0 32,0 32,0
5 32,0 32,0 32,0 32,0 32,0
6 32,0 32,0 32,0 32,0 32,0 32,0
7 32,0 32,0 32,0 32,0 32,0 32,0
8 32,0 32,0 32,0 32,0 32,0 31,1 28,2
9 32,0 32,0 32,0 32,0 32,0 30,1 26,1 23,1
10 32,0 32,0 32,0 32,0 32,0 29,0 24,3 21,4 18,5
12 32,0 32,0 30,7 32,0 26,8 21,1 18,8 17,1 13,7 11,3
14 27,0 26,7 27,3 26,6 24,5 18,7 16,6 15,1 13,0 11,0 8,3
16 22,6 22,3 22,1 22,2 16,4 14,8 13,5 12,0 10,5 8,1
18 18,9 18,6 19,1 18,5 14,8 13,1 12,2 11,1 10,0 7,7
20 6,2 16,7 16,3 15,7 13,4 11,8 10,9 10,1 9,4 7,3
22 14,5 14,1 13,5 12,0 10,8 9,8 9,1 8,6 6,8
24 6,2 12,3 11,7 11,1 9,8 9,0 8,2 7,9 6,4
26 10,8 10,2 10,6 8,7 8,2 7,6 7,2 6,0
28 8,4 9,4 9,4 8,2 7,4 7,0 6,7 5,5
30 8,9 8,3 7,7 6,7 6,4 6,2 5,2
32 7,0 7,4 7,3 6,3 5,7 5,7 4,8
34 6,5 6,7 5,8 5,4 5,2 4,4
36 5,9 6,0 5,4 5,0 4,7 4,1
38 3,0 5,3 5,0 4,7 4,4 3,7
40 4,8 4,7 4,3 4,1 3,4
42 3,0 4,2 4,0 3,6 3,2
44 3,8 3,5 3,1 2,9
46 2,2 3,1 2,7 2,6
48 2,7 2,3 2,3
50 2,2 2,0 1,9
52 2,0 1,7 1,6
54 1,3
56 1,1
12,5-60,0m 360° 43t7,20x7,00m
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne14
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC140-1MS
6,3t Counterweightm 12,5 16,8 21,1 25,4 29,7 34,3 38,3 42,6 46,9 51,2 55,5 60,0
t t t t t t t t t t t t
3 32,0 32,0 32,0
4 32,0 32,0 32,0 32,0
5 32,0 32,0 32,0 32,0 32,0
6 32,0 32,0 32,0 32,0 32,0 32,0
7 32,0 32,0 32,0 32,0 32,0 30,1
8 30,3 31,4 30,6 29,9 27,7 25,6 23,2
9 23,9 25,1 26,2 25,3 23,3 21,8 20,5 18,7
10 19,3 21,0 21,5 21,4 19,9 18,9 17,6 17,0 15,5
12 14,9 15,4 15,3 15,8 15,0 14,5 13,8 12,9 11,7 10,7
14 11,2 12,0 12,2 12,0 12,1 11,8 10,9 10,2 9,1 8,3 7,9
16 9,4 9,6 9,7 9,5 9,4 8,8 8,1 7,1 6,4 6,0
18 7,5 7,8 7,8 7,7 7,5 7,1 6,5 5,6 4,9 4,5
20 6,2 6,3 6,5 6,3 6,1 5,7 5,2 4,3 3,6 3,2
22 5,1 5,2 5,0 4,9 4,5 4,0 3,2 2,6 2,2
24 4,1 4,3 4,1 3,9 3,5 3,1 2,4 1,7 1,4
26 3,5 3,3 3,1 2,7 2,4 1,7 1,1 0,8
28 2,8 2,6 2,4 2,1 1,7 1,1
30 2,1 1,9 1,5 1,2
32 1,6 1,4 1,0
34 1,0
12,5-60,0m 360° 6,3t7,20x7,00m
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne20
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC200-1DIMENSIONS
* w
ith 9
t c
ount
erw
eigh
t
HOOKBLOCK
Vehicle weight 65,0000kg Capacity 9,9te 29,4te 67,3te 103,7te 138,7te 147,2te
Weight 350kg 600kg 850kg 1125kg 1500kg 1750kg
Overall Vehicle Width 3m
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne20
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC200-1MAIN BOOM DUTIES
Main Boom — 69 t counterweight — 360o
Radius (m)
12,4* 12,4 16,6 20,9 25,1 29,4 33,6 37,9 42,1 46,4 50,6 54,9 59,1 63,4 67,8
3 147,0 147,0 146,5 146,0 121,0
3,5 146,5 135,0 135,5 134,5 121,0
4 136,0 125,0 125,0 124,5 121,0 94,8
4,5 127,0 116,0 116,0 116,0 115,0 94,8
5 119,0 108,0 108,0 108,0 107,0 94,8 73,7
6 104,5 94,8 94,9 94,5 93,7 93,0 73,6
7 92,2 84,0 84,2 83,8 83,0 83,6 70,4 52,8
8 79,7 75,3 75,5 75,0 74,8 74,9 67,1 50,8 44,9
9 64,7 64,7 68,5 67,8 68,3 67,7 63,8 48,8 42,1 37,5
10 62,7 61,7 62,2 61,6 60,4 47,0 39,2 35,0 30,8
12 53,0 52,5 52,5 51,9 52,7 44,0 34,1 30,8 27,7 24,0
14 44,6 44,1 44,6 44,2 40,9 30,4 27,3 24,8 22,1 19,6 15,6
16 38,0 37,5 38,3 37,5 37,9 26,8 24,6 22,3 20,1 18,2 15,6 12,0
18 32,2 33,1 32,3 33,1 24,1 21,9 20,3 18,4 16,8 14,7 12,0
20 29,0 28,3 29,2 28,3 22,0 19,7 18,3 16,9 15,6 13,7 11,9
22 24,5 25,3 24,5 19,9 18,2 16,5 15,5 14,5 12,9 11,4
24 22,9 22,2 21,4 18,5 16,6 15,3 14,0 13,4 12,1 10,8
26 19,7 18,9 17,5 15,0 14,1 13,0 12,3 11,4 10,2
28 17,6 16,8 16,6 13,7 12,9 12,1 11,5 10,6 9,7
30 15,0 15,0 15,7 12,8 11,7 11,2 10,7 9,9 9,1
32 14,2 14,1 11,9 10,9 10,2 10,0 9,4 8,6
34 13,6 12,8 11,1 10,1 9,4 9,2 8,8 8,1
36 11,7 10,6 9,4 8,8 8,4 8,2 7,6
38 10,7 10,3 8,8 8,2 7,9 7,6 7,1
40 9,9 8,4 7,6 7,4 7,1 6,7
42 9,2 8,1 7,0 6,9 6,7 6,2
44 7,8 6,7 6,4 6,3 5,8
46 7,5 6,4 5,9 5,9 5,4
48 6,1 5,6 5,5 5,1
50 5,9 5,3 5,1 4,8
54 4,8 4,5 4,1
58 3,7 3,6
62 2,9
66
200,00**
* ov
er r
ear
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne20
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC200-1MAIN BOOM DUTIES
Main Boom — 43,4 t counterweight — 360o
Radius (m)
12,4 16,6 20,9 25,1 29,4 33,6 37,9 42,1 46,4 50,6 54,9 59,1 63,4 67,8
3 144,5 144,5 143,5 121,0
3,5 132,5 132,5 132,0 121,0
4 122,0 122,0 121,5 121,0 94,8
4,5 113,0 113,0 112,5 112,0 94,8
5 105,0 105,0 104,5 104,0 94,8 73,7
6 91,9 92,0 91,6 90,9 91,5 73,6
7 81,5 81,7 81,2 81,7 81,1 70, 52,8
8 72,9 73,3 72,7 73,2 72,6 67,1 50,8 44,9
9 63,7 64,9 64,8 64,3 63,4 63,8 48,8 42,1 37,5
10 57,2 57,2 56,6 56,8 56,7 47,0 39,2 35,0 30,8
12 44,7 44,5 42,5 45,0 43,9 44,0 34,1 30,8 27,7 24,0
14 35,9 35,7 36,0 36,0 35,0 30,4 27,3 24,8 22,1 19,6 15,6
16 29,1 29,9 29,8 29,1 28,2 26,8 24,6 22,3 20,1 18,2 15,6 12,0
18 25,2 24,9 24,2 23,3 22,7 21,9 20,3 18,4 16,8 14,7 12,0
20 21,5 21,1 20,5 20,0 20,4 18,7 18,3 16,9 15,6 13,7 11,9
22 18,2 17,6 18,2 17,5 16,5 15,9 15,5 14,5 12,9 11,4
24 15,9 15,9 15,9 15,1 14,8 14,2 13,9 13,4 12,1 10,8
26 14,6 14,0 13,2 13,5 12,5 12,2 12,3 11,4 10,2
28 13,0 12,4 12,2 11,9 11,7 11,2 10,7 10,6 9,7
30 11,6 11,0 11,3 10,5 10,7 9,8 9,9 9,8 9,1
32 10,1 10,1 9,7 9,4 8,9 9,1 8,5 8,5
34 9,6 9,1 9,1 8,4 8,2 8,0 7,4 7,4
36 8,1 8,2 7,8 7,5 7,0 6,5 6,5
38 7,3 7,3 7,1 6,7 6,2 5,7 5,6
40 6,6 6,4 5,9 5,4 4,9 4,9
42 6,0 5,7 5,3 4,8 4,3 4,2
44 5,1 4,7 4,2 3,7 3,6
46 4,6 4,2 3,6 3,1 3,1
48 3,7 3,2 2,7 2,6
50 3,3 2,7 2,2 2,2
54 2,5 1,5 1,4
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne20
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC200-1FLY JIB DUTIES
12,4 m Main Boom — 69 t counterweightRadius (m) 9,0m 17,0m
0° 20° 40° 0° 20° 40° 3 19,7 15,0 3,5 19,7 14,8 4 19,7 14,6 4,5 19,7 14,3 5 19,6 15,5 14,0 6 19,5 14,3 13,5 7 19,1 13,3 10,3 12,8 8 17,5 12,5 9,8 12,2 9 16,0 11,7 9,4 11,5 9,6 10 14,4 11,0 9,1 10,9 9,2 12 12,3 9,9 8,5 9,9 8,4 14 10,6 9,0 8,0 9,0 7,8 6,9 16 9,4 8,3 8,2 7,3 6,5 18 8,2 7,6 6,8 6,2 20 7,0 6,4 6,0 22 6,5 6,1 5,9 24 6,2 5,9 26 28 30 32 34 36
33,6 m Main Boom — 69 t counterweightRadius (m) 9,0m 17,0m
0° 20° 40° 0° 20° 40° 7 19,6 8 19,1 10,5 9 18,3 10,4 10 17,2 13,3 10,2 12 15,3 12,5 9,5 9,8 14 13,8 11,7 9,1 9,4 7,9 16 12,3 11,0 8,8 8,9 7,5 18 11,2 10,3 8,5 8,5 7,2 20 10,3 9,6 8,3 8,1 6,9 6,1 22 9,4 9,0 8,0 7,6 6,6 5,9 24 8,6 8,3 7,8 7,2 6,2 5,7 26 8,0 7,7 7,5 6,7 5,9 5,5 28 7,5 7,3 7,2 6,3 5,6 5,2 30 7,0 6,8 6,8 5,8 5,4 5,0 32 6,5 6,4 6,4 5,5 5,1 4,9 34 6,1 6,0 5,2 4,8 4,7 36 5,8 5,7 4,9 4,6 4,5 38 5,5 5,4 4,5 4,4 4,4 40 4,3 4,2 4,2 42 4,1 4,1 44 3,9 3,9 46 3,7 3,7 48
67,8 m Main Boom — 69 t counterweightRadius (m) 9,0m 17,0m
0° 20° 40° 0° 20° 40° 18 7,9 5,2 20 7,9 5,2 22 7,9 7,9 5,2 24 7,8 7,8 7,8 5,2 26 7,8 7,7 7,8 5,2 5,1 28 7,7 7,5 7,6 5,2 5,1 30 7,3 7,3 7,3 5,1 5,0 4,8 32 7,0 7,0 7,0 5,1 4,9 4,8 34 6,6 6,6 6,7 5,0 4,9 4,7 36 6,3 6,3 6,3 4,9 4,8 4,6 38 6,0 6,0 6,0 4,8 4,7 4,6 40 5,6 5,6 5,7 4,7 4,5 4,5 42 5,3 5,3 5,4 4,6 4,4 4,4 44 5,0 5,0 5,1 4,4 4,3 4,3 46 4,6 4,7 4,8 4,2 4,2 4,2 48 4,3 4,4 4,5 3,9 4,0 4,1 50 4,0 4,1 4,1 3,7 3,8 3,9 54 3,5 3,0 3,6 3,2 3,4 3,5 58 3,0 3,0 3,1 2,8 2,9 3,0 62 2,5 2,5 2,5 2,4 2,5 2,6 66 2,0 2,1 2,0 2,1 2,2 70 1,4 1,5 1,6 1,7 1,8 74 1,1 1,3
50,6 m Main Boom — 69 t counterweightRadius (m) 9,0m 17,0m
0° 20° 40° 0° 20° 40° 12 15,2 14 14,0 8,1 16 13,0 11,4 7,9 18 12,1 10,8 8,7 7,7 20 11,3 10,2 8,6 7,5 6,6 22 10,5 9,7 8,4 7,2 6,4 24 9,7 9,2 8,2 7,0 6,2 5,6 26 8,9 8,7 8,1 6,8 6,0 5,5 28 8,3 8,3 7,9 6,6 5,8 5,4 30 7,8 7,8 7,7 6,4 5,7 5,3 32 7,3 7,3 7,3 6,1 5,5 5,1 34 6,8 6,8 6,8 5,8 5,3 5,0 36 6,3 6,4 6,4 5,5 5,2 4,8 38 5,9 5,9 6,0 5,2 5,0 4,7 40 5,6 5,6 5,6 4,9 4,8 4,6 42 5,2 5,2 5,3 4,6 4,6 4,5 44 4,9 4,9 5,0 4,4 4,4 4,3 46 4,6 4,6 4,7 4,2 4,2 4,2 48 4,3 4,3 3,9 4,0 4,0 50 4,1 4,1 3,7 3,8 3,8 54 3,7 3,7 3,3 3,3 3,4 58 2,9 3,0 62 2,6 2,6
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne20
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC200-1FLY JIB DUTIES
* M
aIn
Boo
m 6
3,4m
12,4 m Main Boom — 69 t counterweightRadius (m) 25,0m 33,0m
0° 20° 40° 0° 20° 40° 5 12,3 6 12,0 7 11,4 9,3 8 10,9 8,8 9 10,3 8,3 10 9,8 7,9 12 8,8 7,8 7,1 14 7,8 7,0 6,4 5,9 16 7,2 6,5 6,0 5,7 5,4 18 6,5 5,9 5,5 5,1 4,9 4,7 20 5,8 5,5 5,2 4,7 4,5 4,3 22 5,4 5,1 4,9 4,3 4,1 4,0 24 5,0 4,7 4,6 3,9 3,8 3,7 26 4,7 4,5 4,3 3,6 3,5 3,5 28 4,3 4,2 4,2 3,3 3,3 3,2 30 4,1 4,0 4,0 3,1 3,0 3,0 32 3,9 3,8 2,8 2,8 2,8 34 2,6 2,6 2,7 36 2,5 2,5 2,5 38 2,4 2,4 40 2,2 2,2 42 44
33,6 m Main Boom — 69 t counterweightRadius (m) 25,0m 33,0m
0° 20° 40° 0° 20° 40° 10 8,5 12 8,2 6,2 14 7,8 5,8 16 7,4 5,5 18 7,0 6,2 5,2 20 6,5 5,8 4,9 4,5 22 6,1 5,5 5,1 4,6 4,3 24 5,6 5,2 4,8 4,4 4,0 3,8 26 5,3 4,8 4,6 4,1 3,8 3,6 28 4,9 4,5 4,3 3,8 3,6 3,4 30 4,6 4,2 4,1 3,6 3,4 3,3 32 4,3 4,0 3,8 3,4 3,2 3,1 34 4,0 3,8 3,7 3,2 3,0 2,9 36 3,7 3,6 3,5 2,9 2,8 2,7 38 3,6 3,4 3,3 2,7 2,7 2,6 40 3,4 3,2 3,2 2,5 2,5 2,5 42 3,2 3,1 3,0 2,3 2,3 2,3 44 3,0 2,9 2,9 2,2 2,2 2,2 46 2,8 2,8 2,8 2,1 2,0 2,0 48 2,7 2,6 2,0 1,9 1,9 50 2,6 2,5 1,8 1,8 1,8 54 2,4 2,4 1,6 1,6 1,6 58 1,5 1,5
67,0 m Main Boom — 69 t counterweightRadius (m) 25,0m 33,0m
0° 20° 40° 0° 20° 40° 20 3,6 22 3,6 2,2 24 3,6 2,2 26 3,6 2,2 28 3,6 3,5 2,2 2,7* 30 3,6 3,5 2,2 2,7* 32 3,6 3,5 3,5 2,2 2,7* 34 3,6 3,5 3,5 2,2 2,7* 2,6* 36 3,5 3,5 3,5 2,2 2,6* 2,6* 38 3,5 3,5 3,4 2,2 2,6* 2,6* 40 3,5 3,4 3,3 2,2 2,5* 2,6* 42 3,4 3,3 3,3 2,1 2,5* 2,5* 44 3,4 3,2 3,2 2,1 2,4* 2,4* 46 3,4 3,2 3,1 2,1 2,3* 2,3* 48 3,3 3,1 3,0 2,1 2,2* 2,2* 50 3,1 3,0 2,9 2,1 2,2* 2,2* 54 2,8 2,7 2,8 2,0 2,0* 2,0* 58 2,4 2,5 2,5 1,8 1,9* 1,9* 62 2,1 2,2 2,2 1,6 1,8* 1,8* 66 1,8 1,9 2,0 1,4 1,6* 1,7* 70 1,4 1,6 1,6 1,2 1,4* 1,5* 74 1,1 1,2 1,3 1,2* 1,2* 78 82 86
50,6 m Main Boom — 69 t counterweightRadius (m) 25,0m 33,0m
0° 20° 40° 0° 20° 40° 16 6,4 18 6,3 4,3 20 6,1 4,3 22 5,8 5,3 4,2 24 5,6 5,1 4,0 3,7 26 5,4 4,9 4,6 3,8 3,6 28 5,2 4,7 4,4 3,7 3,4 3,3 30 5,0 4,5 4,3 3,5 3,3 3,1 32 4,7 4,3 4,1 3,4 3,2 3,0 34 4,5 4,2 3,9 3,3 3,0 2,9 36 4,3 4,0 3,8 3,1 2,9 2,8 38 4,2 3,8 3,6 3,0 2,8 2,7 40 4,0 3,6 3.5 2,8 2,7 2,6 42 3,8 3,5 3,3 2,7 2,6 2,5 44 3,6 3,4 3,2 2,6 2,5 2,4 46 3,4 3,2 3,1 2,5 2,4 2,3 48 3,3 3,1 3,0 2,4 2,3 2,2 50 3,1 3,0 2,9 2,2 2,2 2,1 54 2,7 2,7 2,7 2,0 2,0 2,0 58 2,4 2,4 2,4 1,8 1,8 1,8 62 2,1 2,1 2,1 1,6 1,6 1,6 66 1,9 1,9 1,4 1,4 1,4 70 1,6 1,6 1,2 1,2 74 1,0 1,0 78
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne20
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC200-1FLY JIB DUTIES
12,4 m Main Boom — 43,4 t counterweightRadius (m) 9,0m 17,0m
0° 20° 40° 0° 20° 40° 3 19,7 15,0 3,5 19,7 14,8 4 19,7 14,6 4,5 19,7 14,3 5 19,6 15,5 14,0 6 19,5 14,3 13,5 7 19,1 13,3 10,3 12,8 8 17,5 12,5 9,8 12,2 9 16,0 11,7 9,4 11,5 9,6 10 14,4 11,0 9,1 10,9 9,2 12 12,3 9,9 8,5 9,9 8,4 14 10,6 9,0 8,0 9,0 7,8 6,9 16 9,4 8,3 8,2 7,3 6,5 18 8,2 7,6 6,8 6,2 20 7,0 6,4 6,0 22 6,5 6,1 5,9 24 6,2 5,9 26 28 30 32 34 36
33,6 m Main Boom — 43,4 t counterweightRadius (m) 9,0m 17,0m
0° 20° 40° 0° 20° 40° 7 19,6 8 19,1 10,5 9 18,3 10,4 10 17,2 13,3 10,2 12 15,3 12,5 9,5 9,8 14 13,8 11,7 9,1 9,4 7,9 16 12,3 11,0 8,8 8,9 7,5 18 11,2 10,3 8,5 8,5 7,2 20 10,3 9,6 8,3 8,1 6,9 6,1 22 9,4 9,0 8,0 7,6 6,6 5,9 24 8,6 8,3 7,8 7,2 6,2 5,7 26 8,0 7,7 7,5 6,7 5,9 5,5 28 7,5 7,3 7,2 6,3 5,6 5,2 30 7,0 6,8 6,8 5,8 5,4 5,0 32 6,5 6,4 6,4 5,5 5,1 4,9 34 6,1 6,0 5,2 4,8 4,7 36 5,8 5,7 4,9 4,6 4,5 38 5,5 5,4 4,5 4,4 4,4 40 4,3 4,2 4,2 42 4,1 4,1 44 3,9 3,9 46 3,7 3,7 48
67,8 m Main Boom — 43,4 t counterweightRadius (m) 9,0m 17,0m
0° 20° 40° 0° 20° 40° 18 7,9 5,2 20 7,9 5,2 22 7,9 7,9 5,2 24 7,8 7,8 7,8 5,2 26 7,8 7,7 7,8 5,2 5,1 28 7,7 7,5 7,6 5,2 5,1 30 7,3 7,3 7,3 5,1 5,0 4,8 32 7,0 7,0 7,0 5,1 4,9 4,8 34 6,6 6,6 6,7 5,0 4,9 4,7 36 6,3 6,3 6,3 4,9 4,8 4,6 38 5,4 6,0 6,0 4,8 4,7 4,6 40 4,7 5,2 5,5 4,7 4,5 4,5 42 4,0 4,5 4,8 4,2 4,4 4,4 44 3,4 3,8 4,1 3,6 4,3 4,3 46 2,9 3,3 3,5 3,1 3,8 4,2 48 2,4 2,7 3,0 2,6 3,3 3,8 50 1,9 2,3 2,4 2,2 2,8 3,3 54 1,2 1,4 1,6 1,4 1,9 2,3 58 1,2 1,5 62 66 70 74
50,6 m Main Boom — 43,4 t counterweightRadius (m) 9,0m 17,0m
0° 20° 40° 0° 20° 40° 12 15,2 14 14,0 8,1 16 13,0 11,4 7,9 18 12,1 10,8 8,7 7,7 20 11,3 10,2 8,6 7,5 6,6 22 10,5 9,7 8,4 7,2 6,4 24 9,7 9,2 8,2 7,0 6,2 5,6 26 8,9 8,7 8,1 6,8 6,0 5,5 28 8,3 8,3 7,9 6,6 5,8 5,4 30 7,8 7,8 7,7 6,4 5,7 5,3 32 7,3 7,3 7,3 6,1 5,5 5,1 34 6,8 6,8 6,8 5,8 5,3 5,0 36 6,3 6,4 6,4 5,5 5,2 4,8 38 5,9 5,9 6,0 5,2 5,0 4,7 40 5,6 5,6 5,6 4,9 4,8 4,6 42 5,2 5,2 5,3 4,6 4,6 4,5 44 4,9 4,9 5,0 4,4 4,4 4,3 46 4,5 4,6 4,7 4,2 4,2 4,2 48 4,0 4,2 3,9 4,0 4,0 50 3,5 3,7 3,7 3,8 3,8 54 2,8 2,8 3,3 3,3 3,4 58 2,3 2,6 62 1,8 1,9
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne25
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC250-1DIMENSIONS
HOOKBLOCK
Vehicle weight 78,0000kg
LOAD REDUCTIONS
Boom Length 14,5m 19,3m 24,1m 28,9m 33,7m 38,5m 43,3m 48,1m 52,9m 57,7m 62,5m 67,3m 72,1m 77,2m 80,0m
Reductions 1,9t 1,49t 1,1t 0,9t 0,8t 0,7t 0,6t 0,6t 0,5t 0,5t 0,4t 0,4t 0,4t 0,4t 0,3t
Capacity 11,8te 35,2te 80,0te 132,9te 155,4te 195,9te
Weight 500kg 750kg 1050kg 1200kg 1700kg 2000kg
* D
utie
s w
ith r
educ
ed o
utrig
ger
base
on
requ
est
Overall Vehicle Width 3m
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne25
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC250-1MAIN BOOM DUTIES
14,5* 14,5 19,3 24,1 28,9 33,7 38,5 43,3 48,1 52,9 57,7 62,5 67,3 72,1 77,2 80,0
3,0 197,0 155,0 147,5 3,5 181,5 155,0 147,5 4,0 168,0 155,0 147,5 146,0 4,5 156,5 155,0 144,5 146,0 5,0 146,5 146,5 144,5 143,0 134,5 6,0 129,40 129,0 129,0 126,0 124,0 106,5 7,0 115,0 115,0 115,0 114,0 110,5 101,0 81,1 8,0 104,0 104,0 104,0 103,0 100,0 94,8 78,1 60,6 9,0 94,4 94,4 94,7 94.0 91,1 88,8 74,9 58,7 47,6 10,0 84,4 84,4 86,6 86,2 83,6 82,9 71,7 57,0 44,5 12,0 50,8 50,8 73,7 73,2 71,3 70,9 64,8 53,6 39,1 34,2 29,4 14,0 61,4 61,9 60,9 61,7 57,7 49,8 34,3 30,6 26,9 23,6 16,0 45,9 53,3 52,2 53,0 51,5 46,0 31,0 27,1 24,4 21,6 18,1 14,7 18,0 46,9 46,6 45,6 46,7 42,2 28,4 24,7 21,9 19,9 17,3 14,7 10,9 9,3 20,0 37,1 39,8 38,9 39,8 39,3 26,1 22,3 20,2 18,1 16,1 14,4 10,9 9,3 22,0 34,5 35,4 34,4 35,5 24,7 20,0 18,4 16,8 14,8 13,9 10,8 9,3 24,0 31,6 31,1 30,8 31,1 23,3 18,2 16,7 15,5 13,9 13,0 10,5 9,3 26,0 27,6 28,5 27,6 21,9 16,9 15,1 14,3 13,0 12,1 10,2 9,3 28,0 24,8 25,5 24,6 20,5 15,8 14,0 13,0 12,1 11,4 9,8 9,3 30,0 22,1 23,0 22,1 19,5 14,8 12,9 12,1 11,2 10,7 9,3 9,0 32,0 20,9 19,9 18,7 13,9 11,8 11,2 10,4 10,0 8,8 8,5 34,0 18,4 18,0 17,8 13,3 11,1 10,3 9,7 9,3 8,4 8,0 36,0 16,4 17,0 12,7 10,5 9,5 9,0 8,7 7,9 7,5 38,0 15,5 15,7 12,0 10,0 8,8 8,3 8,2 7,4 7,0 40,0 14.5 11,4 9,5 8,3 7,7 7,6 7,0 6,6 42,0 13,3 10,9 9,1 7,9 7,0 7,1 6,6 6,2 44,0 10,8 10,6 8,6 7,5 6,6 6,6 6,2 5,8 46,0 10,2 8,2 7,1 6,2 6,0 5,8 5,4 48,0 9,9 8,0 6,7 5,9 5,7 5,4 5,050,0 7,7 6,4 5,5 5,3 4,9 4,654,0 3,5 5,9 4,8 4,6 4,4 3,958,0 5,4 4,4 4,0 3,8 3,362,0 3,9 3,5 3,2 2,866,0 3,0 2,8 2,370,0 2,4 2,074,0 1,6
Radius (m)
Outrigger Width 8,68mm x 8,50m — 360°Length of Main Boom — 96,6 t counterweight
250,0**
• While lifting on main boom with extension rigged, deduct from main boom load chart the following; 750kg with extension 7.75m. 1650kg with extension 7.75m + 7m. • With extension in the transported position, there is no reduction in load capacity.
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne25
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC250-1FLY JIB DUTIES
Lifting Capacities Extension 8,68m x 8,50m — 96,6 t counterweight
14,5m
Radius 10,4m 20,0m
(m) 0º 10º 20º 30° 40° 0º 10º 20º 30° 40°
3 23,63,5 23,6 4 23,6 4,5 23,6 5 23,6 20,7 10,76 22,4 18,9 10,4 7 20,9 17,2 14,3 10,2 8 19,3 16,0 13,4 11,5 9,8 9,3 9 17,9 14,9 12,6 10,9 9,7 9,5 8,8 10 16,7 13,7 11,9 10,4 9,3 9,1 8,3 12 14,2 12,2 10,6 9,4 8,6 8,4 7,5 6,714 12,2 10,7 9,7 8,7 8,0 7,7 6,8 6,1 5,6 16 10,8 9,7 8,8 8,1 7,6 7,0 6,2 5,7 5,2 18 9,4 8,7 8,1 7,7 7,4 6,3 5,8 5,3 4,9 4,620 8,5 8,0 7,7 7,4 7,3 5,8 5,4 5,0 4,6 4,422 7,4 7,4 5,4 5,0 4,7 4,5 4,224 5,0 4,7 4,5 4,3 4,126 4,7 4,5 4,3 4,1 4,028 4,4 4,3 4,1 4,0 4,0 30 4,2 4,1 4,1 4,0 32 34 36 38 40
Lifting Capacities Extension 8,68m x 8,50m — 96,6 t counterweight
48,1m
Radius 10,4m 20,0m
(m) 0º 10º 20º 30° 40° 0º 10º 20º 30° 40°
12 16,1 7,414 15,3 14,1 7,2 16 14,4 13,5 11,6 9,9 6,9 6,5 18 13,5 12,8 11,1 9,5 8,5 6,7 6,220 12,5 12,1 10,6 9,2 8,2 6,5 6,0 5,522 11,5 11,3 10,1 8,9 8,0 6,3 5,8 5,3 4,924 10,6 10,4 9,7 8,6 7,9 6,0 5,6 5,1 4,8 26 9,7 9,6 9,2 8,4 7,7 5,8 5,4 5,0 4,6 4,328 9,1 8,9 8,8 8,2 7,6 5,6 5,2 4,8 4,5 4,230 8,5 8,4 8,3 7,8 7,4 5,4 5,0 4,7 4,4 4,132 7,9 7,8 7,8 7,5 7,1 5,2 4,8 4,6 4,3 4,134 7,3 7,3 7,3 7,1 6,9 5,1 4,7 4,4 4,2 4,036 6,8 6,7 6,8 6,7 6,6 4,9 4,6 4,3 4,1 4,038 6,4 6,3 6,3 6,3 6,3 4,7 4,4 4,2 4,0 3,940 6,0 6,0 6,0 6,0 6,0 4,6 4,3 4,1 4,0 3,942 5,7 5,6 5,7 5,7 5,7 4,4 4,2 4,0 3,9 3,944 5,3 5,3 5,3 5,4 5,4 4,3 4,1 4,0 3,9 3,846 5,0 5,0 5,0 5,0 5,1 4,1 4,0 3,9 3,8 3,848 4,7 4,7 4,7 4,8 4,8 3,9 3,8 3,7 3,7 3,8 50 4,5 4,5 4,5 4,5 4,6 3,8 3,7 3,6 3,6 3,754 4,1 4,1 4,1 4,1 3,0 3,4 3,4 3,4 3,4 3,458 2,6 2,6 2,6 2,6 3,1 3,1 3,1 3,2 3,262 2,8 2,8 2,9 2,9 1,966 1,6 1,7 1,7 1,7 70
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne25
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC250-1FLY JIB DUTIES
Lifting Capacities Extension 8,68m x 8,50m — 96,6 t counterweight
52,9m
Radius 10,4m 20,0m
(m) 0º 10º 20º 30° 40° 0º 10º 20º 30° 40°
14 14,5 6,916 13,8 13,0 6,7 18 13,1 12,5 11,1 9,5 8,5 6,5 6,1 20 12,3 11,8 10,6 9,2 8,3 6,3 5,822 11,3 11,2 10,2 8,9 8,1 6,1 5,6 5,224 10,6 10,5 9,7 8,7 7,9 5,9 5,4 5,1 4,726 9,8 9,7 9,2 8,5 7,8 5,7 5,3 4,9 4,6 4,328 8,9 9,0 8,8 8,3 7,6 5,5 5,1 4,7 4,5 4,230 8,4 8,3 8,3 8,1 7,5 5,3 4,9 4,6 4,4 4,132 7,8 7,8 7,8 7,8 7,4 5,1 4,8 4,5 4,3 4,034 7,3 7,3 7,3 7,4 7,0 5,0 4,6 4,4 4,2 4,036 6,7 6,8 6,8 6,9 6,6 4,8 4,5 4,3 4,1 3,938 6,2 6,3 6,3 6,4 6,3 4,7 4,4 4,1 4,0 3,940 5,7 5,7 5,8 5,9 5,9 4,6 4,3 4,1 3,9 3,842 5,4 5,4 5,4 5,4 5,5 4,4 4,2 4,0 3,9 3,844 5,0 5,1 5,1 5,1 5,1 4,3 4,1 3,9 3,8 3,846 4,7 4,7 4,8 4,8 4,8 4,2 4,0 3,9 3,8 3,848 4,3 4,4 4,4 4,5 4,5 3,9 3,9 3,8 3,7 3,750 4,0 4,1 4,1 4,1 4,1 3,7 3,7 3,7 3,7 3,7 54 3,6 3,6 3,6 3,6 3,6 3,2 3,3 3,3 3,4 3,458 3,1 3,1 3,2 3,1 3,1 2,8 2,8 2,9 3,0 3,062 2,5 2,5 2,5 2,6 2,666 2,2 2,2 2,2 2,2 2,170 74
Lifting Capacities Extension 8,68m x 8,50m — 96,6 t counterweight
57,7m
Radius 10,4m 20,0m
(m) 0º 10º 20º 30° 40° 0º 10º 20º 30° 40°
14 13,8 16 13,4 12,6 6,5 18 12,8 12,2 11,1 6,3 20 12,2 11,7 10,7 9,3 8,3 6,1 5,722 11,5 11,1 10,3 9,0 8,1 6,0 5,5 24 10,8 10,5 9,9 8,7 7,9 5,8 5,4 5,0 26 10,1 9,9 9,5 8,5 7,8 5,6 5,2 4,8 4,5 28 9,4 9,3 9,0 8,2 7,7 5,4 5,0 4,7 4,4 4,230 8,6 8,6 8,5 8,0 7,5 5,3 4,9 4,6 4,3 4,132 8,1 8,0 8,0 7,7 7,4 5,1 4,8 4,4 4,2 4,034 7,6 7,5 7,5 7,5 7,3 4,9 4,6 4,3 4,1 4,036 7,1 7,1 7,1 7,1 7,1 4,8 4,5 4,2 4,0 3,938 6,7 6,7 6,7 6,7 6,7 4,6 4,3 4,1 4,0 3,940 6,2 6,2 6,3 6,3 6,3 4,5 4,2 4,0 3,9 3,842 5,7 5,8 5,8 5,9 5,9 4,4 4,2 4,0 3,8 3,744 5,4 5,4 5,4 5,5 5,5 4,3 4,1 3,9 3,8 3,746 5,1 5,1 5,1 5,1 5,1 4,2 4,0 3,8 3,7 3,748 4,8 4,8 4,8 4,8 4,9 4,1 3,9 3,8 3,7 3,750 4,5 4,5 4,5 4,5 4,6 3,9 3,8 3,7 3,6 3,7 54 3,9 3,9 4,0 4,0 4,0 3,5 3,5 3,5 3,6 3,658 3,5 3,5 3,5 3,5 3,6 3,1 3,1 3,2 3,2 3,362 3,1 3,1 3,2 3,2 3,2 2,7 2,7 2,8 2,8 2,966 2,4 2,4 2,4 2,5 2,570 2,1 2,2 2,2 2,2 2,274
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne25
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC250-1FLY JIB DUTIES
Lifting Capacities Extension 8,68m x 8,50m — 96,6 t counterweight
62,5m
Radius 10,4m 20,0m
(m) 0º 10º 20º 30° 40° 0º 10º 20º 30° 40°
16 12,518 12,2 11,6 6,1 20 11,8 11,3 10,6 5,9 22 11,2 10,9 10,2 9,0 8,1 5,8 5,424 10,6 10,4 9,9 8,7 7,9 5,6 5,2 4,926 10,0 9,8 9,5 8,5 7,8 5,4 5,1 4,7 28 9,3 9,2 9,1 8,3 7,7 5,3 4,9 4,6 4,3 30 8,6 8,6 8,6 8,0 7,5 5,1 4,8 4,5 4,2 4,132 7,9 8,0 8,0 7,6 7,2 5,0 4,6 4,4 4,1 4,034 7,2 7,3 7,4 7,2 7,0 4,8 4,5 4,3 4,0 3,936 6,8 6,8 6,9 6,8 6,8 4,7 4,4 4,2 4,0 3,838 6,3 6,4 6,4 6,5 6,5 4,5 4,3 4,1 3,9 3,840 5,9 6,0 6,0 6,1 6,1 4,4 4,2 4,0 3,8 3,742 5,4 5,5 5,6 5,6 5,7 4,2 4,0 3,9 3,8 3,744 5,0 5,1 5,2 5,2 5,3 4,0 3,9 3,8 3,7 3,646 4,5 4,7 4,8 4,8 4,9 3,9 3,8 3,7 3,6 3,648 4,3 4,3 4,3 4,4 4,5 3,7 3,6 3,5 3,5 3,550 4,0 4,0 4,1 4,1 4,2 3,5 3,5 3,4 3,4 3,454 3,4 3,4 3,5 3,5 3,5 3,2 3,2 3,1 3,2 3,2 58 2,8 2,9 2,9 2,9 2,9 2,7 2,8 2,9 2,9 3,062 2,4 2,4 2,5 2,5 2,5 2,3 2,4 2,4 2,5 2,566 2,0 2,1 2,1 2,0 2,0 1,8 1,9 2,0 2,1 2,170 1,5 1,6 1,6 1,6 1,674 1,3 1,3 1,3 1,3 1,278 1,0 1,0
Lifting Capacities Extension 8,68m x 8,50m — 96,6 t counterweight
67,3m
Radius 10,4m 20,0m
(m) 0º 10º 20º 30° 40° 0º 10º 20º 30° 40°
18 10,3 5,820 10,3 10,2 5,7 22 10,2 10,2 10,1 9,0 5,5 5,2 24 10,0 9,9 9,9 8,7 7,9 5,4 5,026 9,8 9,6 9,5 8,5 7,8 5,2 4,9 4,628 9,3 9,2 9,1 8,4 7,7 5,1 4,8 4,5 4,230 8,7 8,7 8,7 8,2 7,6 4,9 4,6 4,4 4,1 32 8,1 8,1 8,2 7,8 7,4 4,8 4,5 4,3 4,0 3,934 7,5 7,6 7,6 7,4 7,1 4,7 4,4 4,2 4,0 3,836 6,9 7,1 7,1 7,0 6,8 4,6 4,3 4,1 3,9 3,838 6,5 6,5 6,6 6,6 6,5 4,4 4,2 4,0 3,8 3,740 6,1 6,1 6,2 6,2 6,2 4,3 4,1 3,9 3,7 3,742 5,7 5,8 5,8 5,8 5,9 4,2 4,0 3,8 3,7 3,644 5,4 5,4 5,4 5,5 5,5 4,0 3,9 3,7 3,6 3,646 5,0 5,0 5,1 5,1 5,2 3,9 3,8 3,7 3,6 3,548 4,6 4,7 4,7 4,8 4,8 3,7 3,6 3,6 3,5 3,550 4,2 4,3 4,4 4,4 4,5 3,5 3,5 3,4 3,4 3,454 3,7 3,8 3,8 3,8 3,8 3,2 3,2 3,2 3,2 3,258 3,2 3,3 3,3 3,3 3,3 2,9 2,9 2,9 2,9 3,0 62 2,7 2,8 2,8 2,8 2,8 2,5 2,6 2,6 2,7 2,766 2,4 2,4 2,4 2,4 2,4 2,1 2,2 2,3 2,3 2,470 2,0 2,0 2,0 2,1 2,0 1,8 1,8 1,9 1,9 2,074 1,5 1,5 1,5 1,6 1,678 1,2 1,3 1,3 1,3 1,282 1,0 1,0 1,0
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne25
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC250-1FLY JIB DUTIES
Lifting Capacities Extension 8,68m x 8,50m — 96,6 t counterweight
72,1m
Radius 10,4m 20,0m
(m) 0º 10º 20º 30° 40° 0º 10º 20º 30° 40°
18 8,7 20 8,7 5,0 22 8,7 8,6 5,0 24 8,7 8,6 8,6 5,0 4,826 8,7 8,5 8,6 8,5 7,8 4,9 4,7 28 8,7 8,4 8,5 8,3 7,7 4,8 4,6 4,3 30 8,5 8,3 8,2 8,1 7,6 4,7 4,5 4,2 4,0 32 8,0 8,0 8,0 7,8 7,5 4,6 4,4 4,1 3,9 34 7,5 7,5 7,6 7,6 7,4 4,5 4,2 4,0 3,9 3,736 7,1 7,1 7,1 7,2 7,0 4,4 4,1 3,9 3,8 3,738 6,6 6,7 6,7 6,8 6,7 4,3 4,1 3,9 3,7 3,640 6,1 6,2 6,3 6,3 6,3 4,2 4,0 3,8 3,6 3,642 5,7 5,8 5,8 5,9 5,9 4,1 3,9 3,7 3,6 3,544 5,4 5,4 5,5 5,5 5,6 4,0 3,8 3,7 3,5 3,546 5,0 5,1 5,1 5,2 5,2 3,9 3,7 3,6 3,5 3,448 4,7 4,7 4,8 4,8 4,9 3,7 3,6 3,5 3,4 3,450 4,3 4,4 4,4 4,5 4,6 3,5 3,5 3,5 3,4 3,454 3,6 3,7 3,8 3,8 3,9 3,1 3,2 3,2 3,2 3,358 3,1 3,1 3,2 3,2 3,3 2,8 2,8 2,9 2,9 3,0 62 2,6 2,6 2,7 2,7 2,8 2,4 2,5 2,6 2,6 2,766 2,1 2,1 2,2 2,2 2,2 2,0 2,1 2,2 2,3 2,470 1,7 1,7 1,7 1,7 1,8 1,6 1,7 1,8 1,9 1,974 1,4 1,4 1,4 1,3 1,3 1,3 1,3 1,4 1,5 1,578 1,0 1,0 1,1 1,182
Lifting Capacities Extension 8,68m x 8,50m — 96,6 t counterweight
78,5m
Radius 10,4m 20,0m
(m) 0º 10º 20º 30° 40° 0º 10º 20º 30° 40°
20 6,0 22 6,0 3,5 24 6,0 6,0 3,5 26 6,0 6,0 6,0 3,5 3,428 6,0 6,0 6,0 6,0 6,0 3,5 3,4 30 6,0 6,0 6,0 6,0 6,0 3,5 3,4 3,4 32 6,0 6,0 6,0 6,0 6,0 3,5 3,4 3,4 34 5,8 6,0 6,0 6,0 6,0 3,5 3,4 3,4 3,4 36 5,6 5,8 5,9 6,0 6,0 3,5 3,4 3,4 3,4 3,438 5,3 5,4 5,6 5,8 5,8 3,5 3,4 3,4 3,4 3,440 5,0 5,1 5,3 5,5 5,5 3,4 3,4 3,4 3,4 3,442 4,8 4,8 5,0 5,1 5,1 3,4 3,3 3,4 3,4 3,344 4,5 4,5 4,7 4,8 4,8 3,3 3,3 3,3 3,3 3,346 4,2 4,2 4,3 4,5 4,5 3,3 3,2 3,3 3,2 3,248 3,9 4,0 4,0 4,1 4,1 3,2 3,1 3,2 3,1 3,250 3,7 3,7 3,8 3,9 3,9 3,2 3,1 3,1 3,1 3,154 3,1 3,2 3,2 3,3 3,3 2,8 2,9 2,9 2,9 2,958 2,6 2,7 2,7 2,8 2,8 2,4 2,5 2,6 2,7 2,762 2,1 2,2 2,2 2,3 2,3 2,0 2,1 2,2 2,3 2,3 66 1,7 1,8 1,8 1,9 1,9 1,6 1,7 1,8 1,9 1,970 1,3 1,4 1,4 1,4 1,4 1,2 1,3 1,4 1,5 1,574 1,0 1,0 1,1 1,1 1,278 82 86
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne25
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC250-1FLY JIB DUTIES
Lifting Capacities Extension 8,68m x 8,50m — 96,6 t counterweight
14,5m
Radius 28,0m 36,0m
(m) 0º 10º 20º 30° 40° 0º 10º 20º 30° 40°
6 9,27 9,0 8 8,8 7,5 9 8,6 7,2 10 8,4 8,1 6,9 12 7,8 7,5 6,3 6,2 14 7,2 6,8 6,4 5,7 5,6 16 6,5 6,3 5,9 5,4 5,2 5,1 4,9 18 6,0 5,7 5,4 5,1 4,7 4,7 4,6 4,5 4,4 20 5,5 5,2 5,0 4,8 4,5 4,3 4,2 4,1 4,0 3,922 5,1 4,9 4,6 4,5 4,3 3,9 3,8 3,8 3,7 3,624 4,6 4,5 4,3 4,2 4,1 3,6 3,5 3,4 3,4 3,326 4,3 4,1 4,1 4,0 3,9 3,3 3,2 3,2 3,1 3,128 4,0 3,9 3,8 3,7 3,7 3,0 3,0 2,9 2,9 2,930 3,7 3,7 3,6 3,5 3,5 2,8 2,7 2,7 2,7 2,732 3,5 3,4 3,4 3,3 3,3 2,6 2,5 2,5 2,5 2,534 3,3 3,2 3,2 3,2 3,2 2,4 2,3 2,3 2,3 2,336 3,1 3,1 3,1 3,1 3,1 2,2 2,2 2,1 2,2 2,238 2,9 3,0 3,0 3,1 2,0 2,0 2,0 2,0 2,0 40 1,9 1,9 1,9 1,9 1,942 1,8 1,8 1,8 1,8 1,844 1,7 1,7 1,7 1,7 1,846 1,6 1,6 1,6 1,7 48 50
Lifting Capacities Extension 8,68m x 8,50m — 96,6 t counterweight
48,1m
Radius 28,0m 36,0m
(m) 0º 10º 20º 30° 40° 0º 10º 20º 30° 40°
16 5,9 18 5,8 4,2 20 5,6 5,3 4,1 22 5,3 5,1 4,7 3,9 3,724 5,1 4,8 4,5 3,7 3,5 26 4,9 4,6 4,4 4,1 3,5 3,4 3,2 28 4,7 4,4 4,2 4,0 3,8 3,3 3,2 3,0 2,9 30 4,5 4,3 4,0 3,8 3,7 3,2 3,0 2,9 2,8 2,732 4,3 4,1 3,9 3,7 3,6 3,0 2,9 2,7 2,7 2,634 4,1 3,9 3,7 3,6 3,5 2,8 2,7 2,6 2,5 2,536 4,0 3,8 3,6 3,5 3,4 2,7 2,6 2,5 2,4 2,438 3,8 3,6 3,5 3,4 3,3 2,5 2,5 2,4 2,3 2,340 3,7 3,5 3,3 3,2 3,2 2,4 2,3 2,3 2,2 2,242 3,6 3,4 3,2 3,1 3,1 2,3 2,2 2,2 2,1 2,144 3,4 3,3 3,2 3,1 3,0 2,2 2,1 2,0 2,0 2,046 3,3 3,2 3,1 3,0 3,0 2,1 2,0 2,0 1,9 1,948 3,2 3,1 3,0 2,9 2,9 2,0 1,9 1,9 1,9 1,950 3,0 2,9 2,9 2,9 2,9 1,9 1,9 1,8 1,8 1,854 2,7 2,7 2,7 2,7 2,7 1,7 1,7 1,7 1,7 1,7 58 2,4 2,4 2,4 2,5 2,5 1,6 1,6 1,5 1,5 1,662 2,2 2,1 2,2 2,2 2,3 1,5 1,5 1,4 1,4 1,566 1,9 1,9 2,0 2,0 2,0 1,3 1,3 1,3 1,3 1,470 1,7 1,7 1,7 1,8 1,2 1,2 1,2 1,3 1,374 1,0 1,1 1,1 1,1 1,178
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne25
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC250-1FLY JIB DUTIES
Lifting Capacities Extension 8,68m x 8,50m — 96,6 t counterweight
52,9m
Radius 28,0m 36,0m
(m) 0º 10º 20º 30° 40° 0º 10º 20º 30° 40°
16 5,5 18 5,5 20 5,4 3,8 22 5,2 4,9 3,7 24 5,0 4,7 4,4 3,5 3,4 26 4,8 4,5 4,3 3,4 3,2 3,1 28 4,6 4,4 4,1 3,9 3,2 3,1 3,0 30 4,4 4,2 4,0 3,8 3,6 3,1 2,9 2,8 2,7 32 4,3 4,0 3,8 3,7 3,5 2,9 2,8 2,7 2,6 2,534 4,1 3,9 3,7 3,5 3,4 2,8 2,7 2,6 2,5 2,436 3,9 3,8 3,6 3,4 3,3 2,7 2,6 2,4 2,4 2,338 3,8 3,6 3,5 3,3 3,2 2,5 2,4 2,3 2,3 2,240 3,7 3,5 3,3 3,2 3,2 2,4 2,3 2,2 2,2 2,242 3,5 3,4 3,2 3,1 3,1 2,3 2,2 2,1 2,1 2,144 3,4 3,3 3,1 3,0 3,0 2,2 2,1 2,0 2,0 2,046 3,3 3,2 3,0 3,0 2,9 2,1 2,0 1,9 1,9 1,948 3,2 3,1 3,0 2,9 2,9 2,0 1,9 1,9 1,8 1,850 3,0 3,0 2,9 2,8 2,8 1,9 1,8 1,8 1,8 1,854 2,7 2,8 2,7 2,7 2,7 1,7 1,7 1,7 1,6 1,7 58 2,4 2,4 2,5 2,5 2,6 1,6 1,5 1,5 1,5 1,662 2,0 2,1 2,1 2,2 2,2 1,4 1,4 1,4 1,4 1,566 1,6 1,7 1,8 1,8 1,8 1,2 1,2 1,2 1,2 1,370 1,4 1,4 1,5 1,5 1,5 1,0 1,0 1,1 1,174 1,2 1,2 1,2 1,2 78
Lifting Capacities Extension 8,68m x 8,50m — 96,6 t counterweight
57,7m
Radius 28,0m 36,0m
(m) 0º 10º 20º 30° 40° 0º 10º 20º 30° 40°
18 5,2 20 5,2 3,5 22 5,1 4,8 3,5 24 4,9 4,6 3,4 3,326 4,7 4,5 4,2 3,3 3,2 28 4,5 4,3 4,1 3,9 3,1 3,0 2,9 30 4,4 4,1 3,9 3,7 3,6 3,0 2,9 2,8 32 4,2 4,0 3,8 3,6 3,5 2,9 2,8 2,6 2,6 34 4,1 3,9 3,6 3,5 3,4 2,7 2,6 2,5 2,4 2,436 3,9 3,7 3,5 3,4 3,3 2,6 2,5 2,4 2,3 2,338 3,8 3,6 3,4 3,3 3,2 2,5 2,4 2,3 2,3 2,240 3,6 3,5 3,3 3,2 3,1 2,4 2,3 2,2 2,2 2,142 3,5 3,3 3,2 3,1 3,1 2,3 2,2 2,1 2,1 2,044 3,4 3,2 3,1 3,0 3,0 2,2 2,1 2,0 2,0 2,046 3,3 3,1 3,0 2,9 2,9 2,1 2,0 1,9 1,9 1,948 3,2 3,0 2,9 2,9 2,9 2,0 1,9 1,9 1,8 1,850 3,1 3,0 2,9 2,8 2,8 1,9 1,8 1,8 1,8 1,854 2,8 2,8 2,7 2,7 2,7 1,8 1,7 1,7 1,6 1,658 2,5 2,6 2,6 2,5 2,6 1,6 1,6 1,5 1,5 1,5 62 2,2 2,3 2,3 2,4 2,4 1,4 1,4 1,4 1,4 1,566 1,9 1,9 2,0 2,0 2,1 1,3 1,3 1,3 1,3 1,470 1,6 1,6 1,7 1,7 1,7 1,1 1,1 1,1 1,2 1,274 1,4 1,4 1,4 1,4 1,4 1,078 1,1 1,2 1,2 1,2 1,2 82
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne25
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC250-1FLY JIB DUTIES
Lifting Capacities Extension 8,68m x 8,50m — 96,6 t counterweight
62,5m
Radius 28,0m 36,0m
(m) 0º 10º 20º 30° 40° 0º 10º 20º 30° 40°
20 4,722 4,7 3,1 24 4,6 4,5 3,1 26 4,5 4,3 3,1 3,028 4,4 4,2 4,0 3,0 2,9 30 4,2 4,0 3,8 3,7 2,9 2,8 2,7 32 4,1 3,9 3,7 3,6 3,4 2,8 2,7 2,6 2,5 34 4,0 3,8 3,6 3,5 3,3 2,6 2,6 2,5 2,4 2,336 3,8 3,6 3,5 3,3 3,3 2,5 2,4 2,4 2,3 2,238 3,7 3,5 3,4 3,2 3,2 2,4 2,3 2,2 2,2 2,240 3,6 3,4 3,3 3,1 3,1 2,3 2,2 2,1 2,1 2,142 3,5 3,3 3,2 3,1 3,0 2,2 2,2 2,1 2,0 2,044 3,3 3,2 3,1 3,0 3,0 2,1 2,1 2,0 1,9 1,946 3,2 3,1 3,0 2,9 2,9 2,0 2,0 1,9 1,9 1,948 3,0 3,0 2,9 2,9 2,8 1,9 1,9 1,8 1,8 1,850 2,8 2,8 2,8 2,8 2,8 1,8 1,8 1,8 1,7 1,754 2,5 2,5 2,5 2,5 2,6 1,7 1,6 1,6 1,6 1,658 2,2 2,3 2,3 1,3 2,3 1,5 1,5 1,5 1,5 1,562 1,9 2,0 2,0 2,0 2,1 1,4 1,4 1,4 1,4 1,4 66 1,5 1,6 1,7 1,7 1,8 1,2 1,2 1,2 1,2 1,370 1,2 1,3 1,3 1,4 1,4 1,0 1,1 1,1 1,274 1,0 1,0 78
Lifting Capacities Extension 8,68m x 8,50m — 96,6 t counterweight
67,3m
Radius 28,0m 36,0m
(m) 0º 10º 20º 30° 40° 0º 10º 20º 30° 40°
22 4,1 24 4,1 2,7 26 4,1 4,0 2,7 28 4,0 4,0 2,6 2,6 30 4,0 3,9 3,7 2,6 2,6 32 3,9 3,8 3,6 3,5 2,5 2,6 2,4 34 3,8 3,7 3,5 3,4 3,3 2,5 2,5 2,4 2,3 36 3,7 3,5 3,4 3,3 3,2 2,4 2,4 2,3 2,2 2,238 3,6 3,4 3,3 3,2 3,1 2,4 2,3 2,2 2,1 2,140 3,5 3,3 3,2 3,1 3,0 2,3 2,2 2,1 2,0 2,042 3,4 3,2 3,1 3,0 3,0 2,2 2,1 2,0 2,0 1,944 3,3 3,2 3,0 2,9 2,9 2,1 2,0 1,9 1,9 1,946 3,2 3,1 3,0 2,9 2,8 2,0 1,9 1,9 1,8 1,848 3,0 3,0 2,9 2,8 2,8 1,9 1,8 1,8 1,8 1,750 2,9 2,9 2,8 2,8 2,7 1,8 1,8 1,7 1,7 1,754 2,6 2,6 2,6 2,6 2,6 1,6 1,6 1,6 1,6 1,658 2,3 2,3 2,3 2,4 2,4 1,5 1,5 1,5 1,4 1,562 2,0 2,0 2,1 2,1 2,2 1,3 1,3 1,3 1,3 1,4 66 1,7 1,8 1,8 1,9 1,9 1,2 1,2 1,2 1,2 1,270 1,4 1,5 1,5 1,6 1,6 1,0 1,1 1,1 1,1 1,174 1,1 1,2 1,2 1,3 1,3 1,07882
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne25
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
TEREX/DEMAG AC250-1FLY JIB DUTIES
Lifting Capacities Extension 8,68m x 8,50m — 96,6 t counterweight
72,1m
Radius 28,0m 36,0m
(m) 0º 10º 20º 30° 40° 0º 10º 20º 30° 40°
22 3,5 24 3,5 26 3,5 2,1 28 3,5 3,4 2,1 30 3,5 3,4 2,1 2,1 32 3,5 3,4 3,3 2,1 2,1 34 3,5 3,3 3,3 3,2 2,1 2,1 2,0 36 3,5 3,3 3,2 3,2 3,1 2,1 2,0 2,0 1,9 38 3,4 3,3 3,2 3,1 3,0 2,1 2,0 2,0 1,9 1,940 3,3 3,2 3,1 3,0 3,0 2,1 2,0 2,0 1,9 1,942 3,2 3,1 3,0 2,9 2,9 2,0 2,0 1,9 1,8 1,944 3,1 3,1 2,9 2,9 2,8 2,0 1,9 1,8 1,8 1,846 3,1 3,0 2,9 2,8 2,8 1,9 1,8 1,8 1,7 1,748 3,0 2,9 2,8 2,7 2,7 1,8 1,8 1,7 1,7 1,750 2,9 2,8 2,7 2,7 2,7 1,7 1,7 1,7 1,6 1,654 2,6 2,6 2,6 2,6 2,6 1,6 1,6 1,5 1,5 1,558 2,3 2,3 2,4 2,4 2,5 1,4 1,4 1,4 1,4 1,462 1,9 2,0 2,1 2,1 2,2 1,3 1,3 1,3 1,3 1,366 1,6 1,7 1,8 1,8 1,9 1,1 1,1 1,1 1,1 1,2 70 1,3 1,4 1,5 1,5 1,6 1,074 1,1 1,1 1,2 1,2
Lifting Capacities Extension 8,68m x 8,50m — 96,6 t counterweight
77,2m
Radius 28,0m 36,0m
(m) 0º 10º 20º 30° 40° 0º 10º 20º 30° 40°
24 2,4 26 2,4 1,2 28 2,4 2,3 1,2 30 2,4 2,3 1,2 32 2,4 2,3 2,3 1,2 34 2,4 2,3 2,3 1,2 36 2,4 2,3 2,3 2,3 1,2 38 2,4 2,3 2,3 2,3 2,3 1,2 40 2,4 2,3 2,3 2,3 2,3 1,242 2,4 2,3 2,3 2,3 2,3 1,244 2,4 2,3 2,3 2,3 2,3 1,246 2,4 2,3 2,3 2,3 2,3 1,248 2,3 2,3 2,3 2,3 2,3 1,250 2,3 2,3 2,2 2,3 2,3 1,254 2,3 2,2 2,2 2,2 2,2 1,258 2,0 2,2 2,1 2,1 2,1 1,262 1,7 1,8 1,9 2,0 2,0 1,266 1,4 1,5 1,6 1,7 1,770 1,0 1,2 1,2 1,3 1,4 74 1,078
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne35
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
DEMAG AC 350-6DIMENSIONS
HOOKBLOCK
Capacity (t) 205,8 165,6 123,9 80,4 35,2 11,8
Weight (t) 2,5 1,7 1,2 1,05 0,7 0,5
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne35
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
DEMAG AC 350-6MAIN BOOM WITH SUPERLIFT
116,7t CounterweightBoom Length (m) 36,2 40,7 45,2 49,7 54,2 58,7 64Radius (m)6 106 83,37 103,5 80,9 68,38 100,5 78,6 66,6 54,9 46,29 91,6 76,5 64,8 53,7 45,3 35,610 83,7 74,4 63,3 52,6 44,4 34,8 27,312 71,3 69,8 60,2 50,4 42,5 33,4 26,114 61,9 60,5 57,7 48,3 40,7 32,1 25,116 54,4 53,1 52,5 46,6 39,1 30,8 24,118 48,1 47,2 46,6 44,8 37,7 29,7 23,120 42,4 41,9 41,7 41,5 36,3 28,7 22,322 37,7 37,2 37,3 37,4 34,9 27,6 21,524 33,7 33,2 33,3 33,7 33,3 26,6 20,726 30 29,5 29,7 30,1 30,7 25,8 19,928 26,9 26,4 26,5 26,9 27,6 25 19,330 23,6 23,7 23,8 24,2 24,9 24,3 18,732 19,1 21,4 21,5 21,9 22,5 23,1 18,134 19 19,4 19,7 20,3 20,9 17,636 15,4 17,4 17,8 18,4 19 1738 15,7 16 16,7 17,3 16,442 9 13,1 13,7 14,3 14,546 8 11,3 11,9 12,150 7,3 9,9 10,154 6,7 8,458 6,360 4,3
36,2 - 64m 360° 116,7t8,7x8,5m
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne35
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
DEMAG AC 350-6MAIN BOOM WITH SUPERLIFT
95,9t CounterweightBoom Length (m) 36,2 40,7 45,2 49,7 54,2 58,7 64Radius (m)6 106 83,37 103,5 80,9 68,38 100,5 78,6 66,6 54,9 46,29 91,6 76,5 64,8 53,7 45,3 35,610 83,7 74,4 63,3 52,6 44,4 38,4 27,312 71,2 69,8 60,2 50,4 42,5 33,4 26,114 60,5 60 57,7 48,3 40,7 32,1 25,116 51,8 51,4 51,5 46,6 39,1 30,8 24,118 44,8 44,4 44,6 44,8 37,7 29,7 23,120 38,4 37,9 38 38,4 36,3 28,7 22,322 33 32,5 32,6 33 33,6 27,6 21,524 28,7 28,2 28,3 28,7 29,3 26,6 20,726 25,2 24,6 24,7 25,1 25,7 25,8 19,928 22,3 21,7 21,8 22,1 22,7 23,4 19,330 19,8 19,2 19,3 19,6 20,2 20,8 18,732 17,7 17 17 17,4 18 18,7 18,134 15 15 15,4 16,1 16,8 1736 13,3 13,3 13,7 14,3 15 15,238 11,8 12,2 12,8 13,5 13,742 9 9,6 10,2 10,9 11,146 7,6 8,1 8,8 8,950 6,4 7,1 7,254 5,6 5,758 4,560 4
36,2 - 64m 360° 95.9t
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne35
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
DEMAG AC 350-6MAIN BOOM WITHOUT SUPERLIFT
116,7t CounterweightBoom Length (m) 13,7 18,2 22,7 27,2 31,7 36,2 40,7 43,9 48,4 53,9 58,4 64Radius (m) *
3003 200 200 1983.5 195,5 182 182,5 1824 184 168,5 169 168,5 1614.5 173,5 156,5 157 157 155,55 162 146,5 147 146,5 146 132,56 142,5 129 129,5 129,5 128,5 125,5 1007 127 115 116 115,5 116 115 94,5 86,78 113,5 103,5 104,5 104 105 103,5 89,1 80,79 101,5 94,3 95,1 94,7 95,5 94,1 84,2 74,6 66,710 89,7 86,2 87 86,7 87,5 86,1 79,3 69,6 62,6 53,312 74 73,7 74,5 73,6 71,9 60 55,2 48 41,7 36,414 63,6 63,7 64,6 63,8 63,9 53,7 48,6 43,8 38,1 33,9 2816 45,4 55,9 56,7 56,1 56,5 47,3 44 39,8 35,1 31,5 26,218 48 49,8 50,5 49,8 42,2 39,4 36,5 32,3 29,2 24,520 37,1 44,1 44,9 44,1 38,6 35,2 33,1 30,2 27,2 23,122 38,3 40,2 39,4 34,9 32,5 29,8 28 25,5 21,624 31,7 36,3 35,4 31,5 29,8 27,7 25,9 23,9 20,526 32 31,8 29,8 27 25,7 24,2 22,3 19,428 26,2 28,6 28,2 24,6 23,7 22,6 20,8 18,330 11,8 25,8 26,6 22,9 21,6 21 19,7 17,132 23 24,2 21,2 20,1 19,4 18,6 16,334 11,8 22,1 19,8 18,7 17,8 17,4 15,536 19 18,5 17,4 16,8 16,3 14,738 17,7 16,1 15,7 15,3 13,940 15,9 15 14,7 14,4 13,142 12,9 14,3 13,6 13,6 12,344 13,6 12,7 12,7 11,746 11,6 12,1 11,9 11,148 11,5 11,2 10,550 10 10,6 9,952 10 9,254 8,8 8,856 8,358 7,860 5,8
* Special equipment required
13,7 - 64m 360° 116,7t
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne35
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
DEMAG AC 350-6LIFTING CAPACITIES ON FOLDING JIB
116,7t CounterweightMain Boom (m) 36,2 54,2 64Folding Jib (m) 11,4 11,4 11,4Offset 0° 20° 40° 0° 20° 40° 0° 20° 40°Radius (m)
8 22,99 22,910 22,9 22,912 22,9 22,9 22,9 15,414 22,9 22,7 17,5 22,7 21,4 14,816 22,9 22,3 16,7 22,2 20,6 14,2 14,418 22,9 21,2 16 21,7 19,9 15,8 13,7 13,920 22,7 20 15,4 21,1 19,3 15,3 13,1 13,3 13,722 22,3 18,9 14,9 20,4 18,7 14,9 12,6 12,8 13,324 22 18,2 14,4 19,8 18,2 14,5 12,2 12,4 12,826 21,6 17,4 14 19,2 17,7 14,2 11,8 11,9 12,428 21,1 16,7 13,7 18,6 17,2 13,9 11,3 11,5 11,930 20 15,9 13,4 18,1 16,7 13,5 10,9 11,1 11,632 19 15,5 13,1 17,6 16,3 13,2 10,5 10,7 11,234 18 15 13 17,1 15,9 13 10,2 10,3 10,836 16,9 14,6 12,9 16,6 15,5 12,8 9,9 10 10,438 16,2 14,1 12,8 16 15,1 12,7 9,6 9,7 10,140 15,1 14 14,4 14,8 12,5 9,3 9,4 9,844 9,5 10,8 11,7 12,4 12,1 8,6 8,9 9,248 9,5 10,1 10,4 8,2 8,3 8,752 7,6 8,1 8,3 7,8 7,9 8,256 6,1 6,4 6,3 6,8 760 3,9 4,6 5 5,4 5,564 3,8 4,168 2,6 3
36,2 - 64m 11,4m 360° 116,7t
0°-40°
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne35
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
DEMAG AC 350-6LIFTING CAPACITIES ON FOLDING JIB
116,7t CounterweightMain Boom (m) 36,2 54,2 64Folding Jib (m) 20 20 20Offset 0° 20° 40° 0° 20° 40° 0° 20° 40°Radius (m)8 18,59 17,810 17,112 15,8 13,614 14,4 13,1 1016 13,4 8,8 12,6 9,918 12,4 8,3 12,2 9,720 11,5 7,9 6,3 11,7 8,3 9,522 10,5 7,6 6,1 11,3 8 9,2 824 10 7,3 6 10,9 7,8 6,1 8,9 7,726 9,4 7 5,8 10,5 7,5 5,9 8,7 7,528 8,9 6,7 5,7 10,1 7,3 5,8 8,5 7,3 5,830 8,4 6,6 5,6 9,7 71 5,7 8,3 7,1 5,732 7,9 6,4 5,5 9,4 6,9 5,7 8,1 6,9 5,634 7,5 6,2 5,5 9 6,7 5,6 7,9 6,7 5,636 7,2 6 5,4 8,7 6,5 5,5 7,6 6,6 5,538 6,9 5,8 5,3 8,3 6,3 5,4 7,5 6,4 5,440 6,6 5,7 5,3 8 6,2 5,4 7,3 6,3 5,444 6,1 5,5 5,3 7,3 6 5,3 6,9 6,1 5,348 5,8 5,4 6,9 5,7 5,3 6,5 5,9 5,352 5,4 5,4 6,5 5,6 5,2 6,1 5,7 5,256 6,1 5,4 5,2 5,9 5,5 5,260 5,8 5,3 5,2 5,6 5,4 5,264 5 5,3 5 5,3 5,268 3,2 4,2 4 4,5 4,872 3,1 3,676 2,1 2,5
36,2 - 64m 20m 360° 116,7t
0°-40°
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne35
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
DEMAG AC 350-6LIFTING CAPACITIES ON STRONG FIXED JIB WITH SUPERLIFT
116,7t CounterweightMain Boom (m) 58,7Fixed Jib (m) 15 21 27 33 39 45 51Radius (m)12 18,1 14,514 17,8 14,3 11,816 17,5 14,1 11,6 9,6 818 17 13,8 11,4 9,5 7,9 6,520 16,6 13,5 11,2 9,3 7,8 6,4 5,322 16,1 12,1 11 9,1 7,6 6,3 5,224 15,6 12,8 10,8 8,9 7,5 6,2 526 15,2 12,5 10,5 8,7 7,3 6,1 4,928 14,7 12,1 10,2 8,5 7,2 5,9 4,830 14,3 11,8 9,9 8,3 7 5,8 4,632 14 11,5 9,7 8,1 6,9 5,7 4,534 13,6 11,2 9,4 7,9 6,7 5,5 4,436 13,3 11 9,2 7,7 6,6 5,4 4,338 12,9 10,7 8,9 7,5 6,4 5,2 4,140 12,6 10,5 8,7 7,3 6,3 5,1 444 12 10 8,2 7 6 4,9 3,848 11,5 9,5 7,9 6,6 5,7 4,6 3,552 11 9,1 7,5 6,3 5,4 4,4 3,356 10 8,7 7,2 6 5,1 4,1 3,260 8,7 8,2 6,9 5,7 4,9 3,9 364 7,6 7,4 6,7 5,5 4,7 3,7 2,868 5,5 6,4 6,2 5,3 4,5 3,6 2,772 5 5,5 5,1 4,4 3,4 2,576 4,7 4,7 4,2 3,3 2,480 2,7 4 4 3,2 2,384 2,8 3,7 3,1 2,288 3,1 2,9 2,192 2,5 1,996 1,5
58,7m 360° 116t
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne35
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
DEMAG AC 350-6LIFTING CAPACITIES ON STRONG FIXED JIB WITH SUPERLIFT
116,7t CounterweightMain Boom (m) 64Fixed Jib (m) 15 21 27 33 39 45 51Radius (m)12 14,414 14,2 11,4 9,416 13,9 11,2 9,3 7,718 13,6 11,1 9,1 7,5 6,320 13,2 10,8 9 7,4 6,2 522 12,8 10,5 8,7 7,2 6,1 4,9 3,924 12,4 10,2 8,5 7 6 4,8 3,826 12 9,9 8,2 6,9 5,8 4,7 3,628 11,7 9,6 8 6,7 5,6 4,5 3,530 11,3 9,3 7,7 6,5 5,5 4,4 3,432 11 9,1 7,5 6,3 5,3 4,3 3,334 10,7 8,8 7,3 6,1 5,1 4,1 3,136 10,4 8,6 7,1 5,9 5 4 338 10 8,3 6,8 5,7 4,8 3,8 2,940 9,8 8,1 6,6 5,5 4,7 3,7 2,844 9,3 7,6 6,2 5,2 4,4 3,4 2,548 8,8 7,2 5,9 4,9 4,1 3,2 2,352 8,4 6,8 5,6 4,6 3,9 2,9 2,156 8,1 6,5 5,3 4,3 3,6 2,7 1,960 7,8 6,2 5 4,1 3,4 2,5 1,764 7,4 5,9 4,7 3,8 3,2 2,4 1,568 6,5 5,7 4,5 3,6 3 2,272 5 5,3 4,4 3,4 2,9 2,176 4,3 4,2 3,3 2,8 1,980 2,3 3,8 3,2 2,6 1,884 2,5 3 2,5 1,788 2,3 2,4 1,692 2,3 1,596 1,5
64m 360° 116,8t
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne35
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
DEMAG AC 350-6STRONG FIXED JIB WITH OFFSET SECTION AND SUPERLIFT
116,7t CounterweightMain Boom (m) 54,2Fixed Fly Jib (m) 15 21* 27* 33* 39 45 51*Offset 0° 0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 0° 0° 20° 40°Radius (m)12 23,5 18,814 22,7 18,2 15,216 22 17,6 14,8 12,5 10,218 21,3 17,1 15,5 14,3 12,1 10 7,920 20,6 16,6 14,9 14 13,4 11,8 9,9 7,9 5,822 19,9 16,2 14,3 10,5 13,6 13 11,5 11,6 9,7 7,9 5,824 19,2 15,7 13,8 10,2 13,2 12,6 10,1 11,2 11,2 9,5 7,9 5,826 18,6 15,3 13,3 10 12,8 11,8 9,9 10,8 10,9 9,2 9,3 7,7 5,828 17,9 14,9 12,8 9,8 12,5 11,4 9,7 10,6 10,6 9 9 7,5 5,830 17,2 14,5 12,4 9,6 12,2 11,1 9,5 10,3 10,3 8,7 8,8 7,4 5,8 532 16,5 14,2 12 9,5 11,9 10,8 9,3 10,1 10,1 8,5 8,6 7,2 5,8 534 15,8 13,8 11,6 9,3 11,5 10,5 9 9,8 9,8 8,3 8,4 7 5,7 536 15,1 13,5 11,3 9,2 11,3 10,1 8,7 9,6 9,6 8,7 8,2 6,9 5,6 538 14,3 13,2 10,9 9 11 9,9 8,4 9,3 9,3 7,9 8 6,7 5,5 4,9 4,140 13,7 12,9 10,6 8,6 10,8 9,4 8,2 9,1 9,1 7,7 7,8 6,6 5,4 4,9 444 12,3 12 9,9 8 10,3 8,9 7,7 8,7 8,7 7,3 7,5 6,2 5,1 4,8 3,848 10,6 10,4 9,3 7,5 9,8 8,4 7,2 8,3 8,2 6,9 7,1 5,9 4,8 4,5 3,652 8,7 8,4 8,7 7,1 8,7 7,7 6,9 7,9 7,8 6,6 6,7 5,6 4,5 4,2 3,556 7,2 6,9 7,5 7,2 6,4 6,5 7,2 7,4 6,3 6,4 5,2 4,2 3,9 3,360 5,9 5,5 6,1 5,9 5,1 6,1 6,7 6 6,1 4,9 3,9 3,7 3,264 3,5 4,5 4,8 4,7 4 4,9 5,4 5,6 4,6 3,6 3,4 3,168 2,8 3,7 3 3,9 4,3 4,8 4,3 3,3 3,2 2,972 2,5 3 3,3 3,9 3,8 3 3 2,876 2,2 2,5 3,1 3 2,5 2,9 2,780 2,4 2,3 1,7 2,4 2,784 1,6 1,7
* Denotes SF-A-SL
In case of operation with SF-A and SF-A-SL, offset by 20º and 40º, observe the following chart:
total Length of Jib straight Part offsettable Part21m 6m 15m27m 12m 15m33m 18m 15m51m 24m 27m
54,2m 15-51m 360° 116,7t
0°-40°
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne35
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
DEMAG AC 350-6STRONG FIXED JIB WITH OFFSET SECTION AND SUPERLIFT
116,7t CounterweightMain Boom (m) 64Fixed Fly Jib (m) 15 21* 27* 33* 39 45Offset 0° 0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 0°Radius (m)14 14,2 11,816 13,7 11,3 9,118 13,2 10,9 8,9 6,920 12,7 10,6 10,8 8,7 6,9 5,2 3,522 12,3 10,2 10,4 8,4 8,6 6,9 5,2 3,524 11,9 9,8 10,1 8,8 8,1 8,3 6,7 6,5 5,2 3,526 11,5 9,5 9,7 8,5 7,8 8 7,6 6,5 6,5 5,1 3,528 11,1 9,2 9,4 8,2 7,6 7,8 7,3 6,3 6,5 6,3 5 3,530 10,7 8,9 9,1 8 7,4 7,5 7,1 6,1 6,3 6,3 4,9 3,532 10,4 8,6 8,8 7,8 7,2 7,3 6,9 5,9 6,1 6,2 4,8 3,534 10 8,3 8,5 7,5 6,9 7,1 6,7 5,7 5,9 6 4,7 3,536 9,8 8,1 8,3 7,3 6,7 6,9 6,6 5,5 5,7 5,8 4,6 3,438 9,5 7,8 8 7,1 6,4 ,6 6,4 5,3 5,5 5,6 4,4 3,340 9,2 7,6 7,8 6,8 6,2 6,4 6,2 5,1 5,3 5,5 4,3 3,244 8,7 7,2 7,3 6,5 5,9 6 5,9 4,8 5 5,1 4 348 8,2 6,7 6,9 6,2 5,5 5,7 5,6 4,6 4,7 4,8 3,8 2,852 7,8 6,3 6,5 5,9 5,2 5,3 5,4 4,3 4,4 4,5 3,6 2,656 7,3 6 6,2 5,6 4,9 5 5,1 4 4,1 4,2 3,3 2,560 6 5,6 5,8 5,3 4,6 4,7 4,9 3,7 3,8 4 3,1 2,364 4,9 4,5 5 4,3 4,5 4,7 3,5 3,6 3,8 2,9 2,168 3,9 3,5 3,9 3,6 4,1 3,3 3,4 3,6 2,8 272 2,4 2,6 2,9 2,7 3,1 2,8 3,2 2,6 1,876 1,7 1,9 2,2 2,1 2,4 2,5 1,780 1,6 2,1 1,5
* Denotes SF-A-SL
In case of operation with SF-A and SF-A-SL, offset by 20º and 40º, observe the following chart:
total Length of Jib straight Part offsettable Part21m 6m 15m27m 12m 15m33m 18m 15m51m 24m 27m
64m 15-45m 360° 116,7t
0°-40°
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne35
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
DEMAG AC 350-6LIFTING CAPACITIES ON LUFFING FLY JIB
116,7t CounterweightMain Boom (m)
18,2
Fixed Jib (m)
22* 24 30 36 42 48 54 60** 66 72**
Offset 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65°
Radius (m)12 61 45,4
14 58,5 45,4
16 55,6 45,4 41,7 32,7
18 50,6 44,6 41,1 32,1 26
20 45,3 46,5 42,9 44,4 40,1 31,6 25,6 20,5
22 37 42,1 40 42,3 39 31,1 25,2 20,1
24 38,4 36,9 33,1 38,6 36,5 36,6 30,7 24,8 19,8 16,1
26 35,2 33,9 35,4 34 33,1 34,9 29,5 30,2 24,4 19,5 15,8 13,4
28 31,3 32,8 31,5 29,2 32,4 28,1 29,4 24,1 19,2 15,6 13,2 11
30 29,2 25 30 28,8 26,8 28,5 23,4 23,8 19 15,4 13 10,8 8,5
32 28,1 27 24,5 27,5 26,4 22,8 23,5 18,7 18,7 15,2 12,9 10,7 8,5
34 26,2 25,1 21,4 25,9 24,7 22,2 23,1 18,5 18,5 14,9 12,7 10,5 8,4
36 23,5 18,3 24,3 23,1 21,3 22,6 21,9 18,3 18,3 14,8 14,7 12,6 10,4 8,3
38 22,1 21,6 19,1 22 21,2 18 18,1 14,6 14,6 12,4 12,3 10,2 8,2
40 19,9 20,3 16,9 20,7 20 17,8 17,9 17,9 14,5 14,4 12,1 12,2 10,1 8
42 19 14,7 19,4 18,7 16,5 17,8 17,6 14,3 14,2 11,8 12 10 9,9 7,7
44 17,8 17,6 15 17,2 17 14,2 14,1 14,1 11,5 11,8 9,7 9,8 7,5
46 16,6 13,5 16,5 16,3 13,7 14 14 11,2 11,6 9,4 9,6 7,3 7,2
48 15,7 11,9 15,4 15,4 12,7 13,8 13,9 10,9 11,4 11,6 9,1 9,4 7,1 7,1
50 14,4 14,6 11,7 13,5 13,8 10,6 11,1 11,3 8,8 9,2 6,9 7
54 13,2 12,3 12,7 9,5 10,5 10,8 8,3 8,7 9 6,4 6,7
58 11,5 8,5 9,8 10,3 7,8 8,2 8,5 6 6,3 6,5
62 9,1 9,6 7,4 7,8 8 5,7 5,9 6,1
66 7,5 7,7 5,4 5,6 5,8
70 7,4 5,2 5,4 5,5
74 5,1 5,3
* Denotes SF-A-SL
18,2m 22-72m 360° 116,7t
82°-65°
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne35
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
DEMAG AC 350-6LIFTING CAPACITIES ON LUFFING FLY JIB
116,7t CounterweightMain Boom (m)
27,2
Fixed Jib (m)
22* 24 30 36 42 48 54 60** 66 72**
Offset 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65°
Radius (m)12 50,9
14 50,2 45,2 36,1
16 49,5 44,8 35,6 28,2 22,5
18 48,9 44,4 35,2 27,8 22,2 18,2
20 46,6 44,8 43,4 34,8 27,4 21,8 17,9 14,6
22 43,2 40,5 42,1 34,4 27 21,5 17,6 14,4 12
24 36,7 37 39,3 37,1 33,7 33,3 26,7 21,2 17,3 14,1 11,8 10,8
26 33,9 33,2 34,1 32,9 33 26,3 26,2 21 17,1 13,9 11,7 10,6 8,9
28 31,3 29,5 31,5 32,1 31,1 26,1 25,9 20,7 20,6 16,9 13,7 11,5 10,4 8,8
30 29,1 27,3 29,2 27,5 28,8 2,8 25,8 25,7 20,5 20,4 16,7 13,5 11,3 10,3 8,6
32 25,5 25,7 25,4 26,8 24,9 24,9 25,2 20,4 20,2 16,4 16,3 13,3 11,2 10,2 8,5
34 23,6 23,8 25,1 23,2 23,9 24,7 22,7 20,2 19,9 16,3 16,2 13,1 13 11 10 8,3
36 22,2 23,5 21,7 21,3 23,2 21,3 19,9 19,8 16,2 16 13 12,9 10,9 10,7 9,9 8,4
38 20,3 18,6 21,6 19,9 19,5 19,7 19,4 16 15,8 12,8 12,7 10,8 10,6 9,7 7,9
40 19,1 20,4 18,8 18 19,2 18,3 15,9 15,7 12,8 12,6 10,7 10,5 9,6 9,4 7,7
42 19,1 17,6 16,5 18,7 17,2 15,8 15,6 15,4 12,7 12,4 10,6 10,4 9,5 9,3 7,5 7,7
44 16,6 15 17,6 16,2 15 15,5 15,2 12,6 12,4 10,5 10,3 9,3 9,2 7,4 7,6
46 15,6 16,6 15,3 14,2 15,4 14,9 12,5 12,3 12,1 10,4 10,2 9,1 9,1 7,2 7,4
48 15,7 14,4 13,4 15,2 14,1 12,1 12,2 12,1 10,4 10,1 9,9 8,9 9 7 7,3
50 13,7 14,6 13,3 11,7 12,1 12 10,3 10,1 9,8 8,7 8,9 6,8 7,1
54 13,2 12 10,8 12 11,5 9,9 10 9,7 8,2 8,5 8,4 6,4 6,7
58 10,8 11,5 10,3 9,2 9,7 9,7 7,8 8,2 8,2 6 6,4 6,7
62 9,3 9,3 9 7,5 7,8 8 5,6 6 6,3
66 8,9 8,1 7,2 7,5 7,8 5,4 5,6 5,9
70 7,3 7,2 7,3 5,2 5,4 5,6
74 6,6 5,2 5,4
78 5,1
* Denotes SF-A-SL
27,2m 22-72m 360° 116,7t
82°-65°
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne35
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
DEMAG AC 350-6LIFTING CAPACITIES ON LUFFING FLY JIB
116,7t CounterweightMain Boom (m)
22,7
Fixed Jib (m)
22* 24 30 36 42 48 54 60** 66 72**
Offset 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65°
Radius (m)12 56,2 40
14 55,3 45,4 39,4 31,1
16 54,3 45,4 38,8 30,6 24,9
18 51,7 45,4 38,3 30,1 24,4 19,6
20 47 45,5 43,6 37,8 29,6 24 19,3 15,7 13,2
22 40,8 41,2 41,8 41,4 37 37,1 29,2 23,7 19 15,5 13 10,8
24 32,7 37,6 36,3 37,7 35,2 36,4 28,8 28,8 23,3 18,7 15,2 12,8 10,7 9,5
26 34,5 32,8 29,8 34,7 33,3 34,3 28,2 28,4 23 18,4 14,9 12,6 10,5 9,3
28 31,9 30,3 32 30,5 30,7 31,6 27,5 28,1 22,7 22,2 18,1 14,7 12,4 10,3 9,2
30 28,1 29,8 28,3 27 29,4 27,8 26,7 27,7 22,4 22 17,9 17,8 14,5 12,2 10,2 9
32 26,1 26,3 27,5 26 25,8 27 25,4 22,1 21,8 17,7 17,6 14,3 14,2 12,1 10,1 8,9
34 25,6 24,1 22,9 25,2 23,6 21,8 21,5 17,5 17,4 14,1 14,1 11,9 9,9 8,7
36 22,6 20 23,7 22 21,6 21,3 21,2 17,4 17,2 14 13,9 11,8 11,7 9,8 8,5
38 21,1 22,2 20,7 20,1 21,1 20,3 17,2 17 13,8 13,7 11,6 11,5 9,7 9,5 8,2
40 20,8 19,4 18,1 20,2 19,1 17 16,9 16,8 13,7 13,6 11,5 11,4 9,6 9,4 8
42 18,2 16,1 19,2 17,9 16,5 16,8 16,7 13,6 13,4 13,3 11,3 11,2 9,4 9,3 7,8 7,8
44 17,2 18,2 16,9 15,3 16,6 16,2 13,5 13,3 13,2 11,1 11,1 9,3 9,2 7,6 7,7
46 17,1 15,9 14 16,4 15,6 13,3 13,2 13,1 10,9 11 10,9 9,1 9,1 7,3 7,5
48 15,1 12,8 15,7 14,7 12,6 13,1 13 10,8 10,9 10,9 8,9 9 7,1 7,3
50 14,2 15 13,9 11,9 13 12,9 10,6 10,8 10,8 8,7 8,8 8,6 6,9 7,1
54 12,5 10,5 12,5 12,1 9,8 10,5 10,6 8,2 8,5 8,4 6,4 6,8 7
58 11,9 10,9 9 10 10,4 7,9 8,2 8,3 6 6,4 6,6
62 9,9 9,3 9,5 7,6 7,8 8,1 5,7 6 6,2
66 8,6 7,2 7,5 7,8 5,4 5,6 5,9
70 7,2 7,5 5,2 5,4 5,6
74 5,1 5,3
78 5,1
* Denotes SF-A-SL
22,7m 22-72m 360° 116,7t
82°-65°
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne35
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
DEMAG AC 350-6LIFTING CAPACITIES ON LUFFING FLY JIB
116,7t CounterweightMain Boom (m)
31,7
Fixed Jib (m)
22* 24 30 36 42 48 54 60** 66 72**
Offset 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65°
Radius (m)14 41,6 30,4
16 40,7 37,8 30 24,2
18 38,8 36,9 29,6 23,8 19,1
20 37,3 35,7 29,3 23,5 18,8 15,4
22 36,2 34 34,6 29,1 23,2 18,6 15,2 12,2
24 34,9 31,9 33,6 28,7 23 18,3 15 12,1 10,9 9,5
26 33,3 30 32,3 29,9 27,9 27,7 22,8 18,2 14,8 11,9 10,8 9,3 7,7
28 28,4 31 28,3 27,1 26,5 22,5 22 18 14,6 11,8 10,7 9,2 7,6
30 27,2 24,4 26,9 26,3 25,3 22,2 21,7 17,8 14,5 11,7 10,5 9 7,5
32 23,1 26 22,7 25,4 24,2 21,9 21,4 17,6 17,5 14,4 11,6 10,4 8,9 7,4
34 22 21,6 24,5 23,1 20,6 21,5 21,1 17,5 17,3 14,2 13,8 11,4 10,3 8,7 7,2
36 20,7 20,6 22,1 19,7 20,5 20,4 17,4 17,1 14,1 13,8 11,3 10,5 10,2 8,6 7,1
38 19,6 21,1 18,7 19,5 19,6 17,8 17,3 16,9 14 13,7 11,2 10,5 10 8,5 7
40 17,8 19 17,1 16,8 16,7 13,9 13,7 11,1 10,5 9,9 9,2 8,4 6,9
42 16,9 18,3 16,3 16,3 16,4 15,3 13,8 13,6 11 10,5 9,7 9,2 8,3 8,1 6,8
44 15,9 17,2 15,4 15,7 16,1 14,7 13,7 13,5 12,7 11 10,5 9,7 9,2 8,2 8,1 6,7 6,1
46 14,6 15,8 14,2 13,5 13,5 12,4 10,9 10,5 9,6 9,2 8,1 8 6,6 6,1
48 13,8 15,1 13,5 13,3 13,4 12,2 10,9 10,5 9,5 9,5 9,2 8 7,9 6,5 6,1
50 14,3 12,7 13 13,3 11,9 10,8 10,5 9,5 9,4 9,1 7,9 7,8 6,4 6,1
54 11,4 12,5 11 10,8 10,5 9,5 9,2 9,1 8,2 7,8 7,7 6,1 6,1
58 9,9 10,5 9,4 9 9 8,2 7,6 7,6 7,2 5,8 5,9 5,2
62 9,9 8,4 8,8 8,9 8 7,4 7,5 7,2 5,5 5,7 5,2
66 7,6 8,7 7,2 7,1 7,3 7,2 5,3 5,5 5,2
70 6,5 7,1 6,5 5,1 5,3 5,2
74 6,9 5,8 4,9 5,1 5,1
78 5,3 4,9 4,8
82 4,3
* Denotes SF-A-SL
31,7m 22-72m 360° 116,7t
82°-65°
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne35
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
DEMAG AC 350-6LIFTING CAPACITIES ON LUFFING FLY JIB WITH SUPERLIFT
116,7t CounterweightMain Boom (m)
36,2
Fixed Jib (m)
22* 24 30 36 42 48 54 60** 66 72**
Offset 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65°
Radius (m)14 33 26,2
16 31,7 30,4 25,7 20,6
18 30,5 29,3 25,2 20,3 16,6
20 29,3 28,2 24,4 19,9 16,3 13,4
22 28,2 27,2 23,6 19,5 16,1 13,2 10,7
24 27 27,3 26,3 22,9 19,2 15,8 12,9 10,5 9,7
26 25,8 26,3 25,3 25,5 22,2 21,6 18,8 15,6 12,7 10,3 9,5 8,2
28 25,4 24,3 24,6 21,5 21 18,4 18,3 15,4 12,6 10,1 9,3 8 6,6
30 24,5 24,6 23,8 20,9 20,3 17,9 17,8 15,2 12,4 10 9,1 7,9 6,5
32 23,6 23,4 23,1 20,3 19,8 17,4 17,3 14,9 14,6 12,2 9,9 9 7,8 6,4
34 21,7 22,3 21,9 19,2 16,9 16,8 14,6 14,4 12 11,7 9,7 8,8 7,6 6,2
36 20,3 20,6 18,7 18,5 16,4 16,4 14,3 14,1 11,9 11,6 9,6 9,3 8,7 7,5 6,1
38 19,2 18,2 18 15,9 15,9 15,8 14 13,8 11,8 11,4 9,4 9,2 8,6 7,3 6
40 17,7 17,5 15,5 15,4 13,7 13,5 11,7 11,3 9,4 9,1 8,5 8,2 7,2 5,9
42 16,4 15,1 15 13,3 13,2 13 11,5 11,1 9,3 8,9 8,3 8 7,1 6,9 5,8
44 15,5 14,7 14,6 13 12,9 12,7 11,3 11 9,3 8,8 8,2 7,9 7 6,8 5,7
46 14,2 12,6 12,4 11,1 10,8 10,6 9,2 8,7 8,1 7,8 6,9 6,6 5,6 5,4
48 13,5 12,4 12,2 10,9 10,6 10,4 9,1 8,7 8,4 8,1 7,7 6,8 6,5 5,5 5,3
50 12,7 12,1 11,9 10,7 10,4 10,2 9 8,6 8,3 8,1 7,6 6,7 6,4 5,4 5,2
54 11,1 10,1 9,8 8,7 8,5 8,1 7,8 7,5 7,1 6,6 6,3 5,3 5
58 9,5 8,2 8 7,6 7,2 6,9 6,5 6,1 5,9 5,2 4,9
62 8,7 7,9 7,7 7,1 7 6,7 6,3 6 5,8 5,1 4,8 4,6
66 7,4 6,8 6,5 6,1 5,9 5,6 5 4,7 4,5
70 6,3 5,7 5,5 4,9 4,6 4,4
74 5,7 5,6 5,3 4,8 4,5 4,3
78 5,1 4,4 4,2
82 4,1
* Denotes SF-A-SL
36,2m 22-72m 360° 116,7t
82°-65°
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne35
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
DEMAG AC 350-6LIFTING CAPACITIES ON LUFFING FLY JIB WITH SUPERLIFT
116,7t CounterweightMain Boom (m)
40,7
Fixed Jib (m)
22* 24 30 36 42 48 54 60** 66 72**
Offset 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65°
Radius (m)14 28,6
16 27 26,5 21,7
18 26,1 25,2 21,3 17,4 14,3
20 25,2 24,3 20,7 17,1 14 11,3
22 24,4 23,6 20 16,8 13,8 11,2 9,9
24 23,6 23 22,8 19,3 16,5 13,5 11 9,7 8,2
26 22,8 22,2 22,1 21,5 18,8 16,2 13,4 10,9 9,6 8,1 6,9
28 21,5 21,5 20,9 18,3 18 15,9 13,2 10,7 9,4 7,9 6,8 5,4
30 20,9 20,3 17,9 17,5 15,5 15,5 13 10,6 9,2 7,8 6,7 5,3
32 20,3 19,8 17,5 17,1 15,1 15 12,8 10,5 9,1 7,7 6,6 5,3
34 19,6 19,6 19,2 17 16,7 14,7 14,5 12,6 12,3 10,3 8,9 7,5 6,4 5,2
36 18,7 18,5 16,3 14,4 14,2 12,4 12,1 10,2 9,5 8,8 7,4 6,3 5,1
38 17,7 17,8 15,9 15,6 14 13,8 12,1 11,8 10,1 9,5 8,6 8,1 7,2 6,2 5
40 16,8 15,5 15,2 13,6 13,4 13,2 11,9 11,6 10 9,5 8,5 8,1 7,2 6,1 4,9
42 14,8 13,1 12,9 11,6 11,3 9,9 9,5 8,3 8 7,1 6,7 6 4,8
44 14,2 12,9 12,6 11,3 11,1 10,8 9,8 9,4 8,2 7,9 7 6,6 5,9 5,6 4,7
46 13,6 12,6 12,3 11,1 10,8 10,6 9,6 9,2 8,1 7,8 6,9 6,5 5,8 5,5 4,6
48 12 10,6 10,4 9,4 9 8,4 8 7,7 6,9 6,5 5,8 5,5 4,6 4
50 11,7 10,4 10,1 9,1 8,9 8,3 7,8 7,5 6,8 6,4 5,7 5,4 4,5 4
54 9,8 8,5 8,2 7,6 7,2 6,9 6,6 6,3 6 5,6 5,2 4,4 4
58 9,1 8,2 8 6,9 6,6 6,4 6,2 5,8 5,5 5,1 4,7 4,3 4
62 7,7 6,7 6,4 6,1 5,8 5,5 5,3 5 4,6 4,3 3,9 3,2
66 6,2 5,6 5,3 5,2 4,8 4,5 4,3 3,8 3,2
70 5,9 5,4 5,1 4,7 4,4 4,2 3,7 3,2
74 4,9 4,6 4,3 3,9 3,6 3,2
78 4,2 3,5 3,1
82 4 3,4 3,1
86 3
* Denotes SF-A-SL
40,7 22-72m 360° 116,7t
82°-65°
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne35
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
DEMAG AC 350-6LIFTING CAPACITIES ON LUFFING FLY JIB WITH SUPERLIFT
116,7t CounterweightMain Boom (m)
45,2
Fixed Jib (m)
22* 24 30 36 42 48 54 60** 66 72**
Offset 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65°
Radius (m)14 24,3
16 23,6 22,2 18,6
18 22,9 21,6 18,2 14,9
20 22,1 21 17,8 14,7 11,5
22 21,3 20,4 17,4 14,6 11,5 10,2
24 20,6 19,7 17 14,3 11,5 10,1 8,4
26 20 19,3 19 16,6 14 11,4 9,9 8,2 6,9
28 18,8 18,5 18,2 16,1 13,7 11,3 9,8 8,1 6,8 5,7 4,1
30 18,2 17,7 15,6 15,4 13,4 11,1 9,6 7,9 6,6 5,6 4,1
32 17,8 17,3 15,3 15 13,1 12,6 11 9,5 7,8 6,5 5,5 4,1
34 17,3 16,8 14,9 14,5 12,8 12,4 10,8 9,6 9,3 7,6 6,4 5,4 4,1
36 16,6 16,4 14,2 12,5 12,2 10,6 9,6 9,1 7,5 6,3 5,4 4,1
38 16,1 15,7 13,8 12,2 12 10,4 9,6 8,9 8,3 7,4 6,2 5,3 4,1
40 15,4 15,3 13,5 13,2 11,9 11,7 10,3 9,6 8,8 8,2 7,3 7 6,1 5,2 4,1
42 14,8 13,3 12,9 11,4 11,1 10,1 9,5 8,6 8,1 7,1 6,8 6 5,1 4
44 12,6 11,2 10,9 9,9 9,4 8,5 8 7 6,7 6 5,4 5 3,9
46 12,3 10,9 10,6 9,7 9,3 8,5 8,3 7,9 6,9 6,5 5,9 5,3 4,9 4,1 3,8
48 11,9 10,6 10,4 9,2 8,5 8,2 7,8 6,8 6,4 5,8 5,3 4,9 4,1 3,8 2,7
50 10,1 9 8,4 8 7,7 7,1 6,7 6,3 5,7 5,2 4,8 4,1 3,7 2,7
54 9,7 8,6 8,3 7,4 6,9 6,4 6,1 5,8 5,5 5,1 4,6 4,1 3,6 2,7
58 8 7,1 6,7 6,2 5,9 5,5 5,3 4,9 4,4 4,5 4,1 3,5 2,7
62 6,5 5,7 5,3 5 4,8 4,3 4,4 4 3,3 3,4 2,7
66 6,3 5,5 5,1 4,6 4,2 4,3 3,9 3,3 3,3 2,7 1,9
70 5 4,4 4,1 4,2 3,8 3,3 3,3 2,7 1,9
74 4 3,7 3,3 3,3 2,7 1,9
78 3,8 3,2 2,6 1,9
82 3,1 2,6 1,9
86 1,9
90 1,9
* Denotes SF-A-SL
45,2 22-72m 360° 116,7t
82°-65°
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne35
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
DEMAG AC 350-6LIFTING CAPACITIES ON LUFFING FLY JIB WITH SUPERLIFT
116,7t CounterweightMain Boom (m)
49,7
Fixed Jib (m)
22* 24 30 36 42 48 54 60** 66 72**
Offset 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65°
Radius (m)16 18,4
18 17,9 17,3 14,1
20 17,5 16,9 13,9 11 9,8
22 17,1 16,5 13,7 11 9,7 8,3
24 16,8 16,1 13,4 10,9 9,6 8,1 6,6
26 16,4 15,8 13,1 10,8 9,4 7,9 6,5 5
28 15,8 15,6 15,4 12,9 10,6 9,2 7,7 6,3 5 3,9
30 15,2 15 14,8 12,7 11,9 10,4 9 7,6 6,2 5 3,9 2,5
32 14,8 14,5 12,5 11,8 10,3 8,9 7,4 6,1 5 3,9 2,5
34 14,4 14,1 12,3 11,7 10,1 9 8,7 7,2 5,9 4,9 3,9 2,5
36 13,9 13,7 12,1 11,6 10 9 8,5 7,7 7,1 5,8 4,8 3,9 2,5
38 13,4 13,3 11,4 9,8 9 8,4 7,7 6,9 5,7 4,7 3,8 2,5
40 13 12,8 11,2 9,7 9 8,3 7,7 6,8 6,5 5,6 4,6 3,8 2,5
42 12,6 12,4 10,9 10,5 9,6 8,9 8,1 7,7 6,7 6,3 5,4 4,8 4,5 3,7 2,5
44 12,1 10,7 10,3 8,8 8 7,6 6,6 6,2 5,3 4,8 4,5 3,4 3,7 2,5
46 10,1 8,7 7,8 7,8 7,4 6,5 6,1 5,2 4,8 4,4 3,4 3,6 2,5
48 9,9 8,6 7,8 7,3 6,6 6,4 6 5,2 4,8 4,4 3,4 3,6 2,4 2,5
50 9,7 8,5 7,8 7,2 6,6 6,3 5,9 5,1 4,7 4,3 3,4 3,5 2,4 2,5
54 7,7 6,9 6,5 5,7 5,4 4,9 4,5 4,1 3,4 3,4 2,4 2,4
58 6,3 5,5 5,2 4,8 4,3 3,8 4 3,3 3,2 2,4 2,3
62 6,1 5,4 5 4,2 3,8 3,9 3,3 2,5 3,1 2,4 1,6 2,3
66 4,8 4,1 3,7 3,2 2,5 3,1 2,4 1,6 2,2
70 3,6 3,2 2,5 3 2,4 1,6 2,1
74 3,5 2,5 2,4 1,6 2,1
78 2,5 2,4 1,6
82 1,6
86 1,6
* Denotes SF-A-SL
49,7m 22-72m 360° 116,7t
82°-65°
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne35
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
DEMAG AC 350-6LIFTING CAPACITIES ON LUFFING FLY JIB WITH SUPERLIFT
116,7t CounterweightMain Boom (m)
54,2
Fixed Jib (m)
22* 24 30 36 42 48 54 60** 66
Offset 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65°
Radius (m)16 13,4
18 13 12,6 10,1
20 12,6 12,2 9,9 7,5
22 12,2 11,9 9,7 7,5 7,1
24 11,9 11,6 9,5 7,5 6,9 5,7
26 11,6 11,3 9,2 7,3 6,7 5,5 4,2
28 11,4 11,1 9 7,2 6,5 5,3 4,1 2,9
30 10,6 10,9 8,8 7,1 6,3 5,1 4 2,9 2
32 10,4 10,1 8,7 8 7 6,2 5 3,9 2,9 2
34 10,1 9,8 8,5 7,9 6,8 6 4,8 3,8 2,9 2
36 9,9 9,7 8,4 7,7 6,6 5,7 5,9 4,7 3,7 2,8 2
38 9,7 9,5 7,6 6,5 5,7 5,7 5,3 4,6 3,5 2,7 2
40 9,1 9,3 7,5 6,4 5,7 5,6 5,2 4,5 4,1 3,4 2,7 2
42 8,9 8,7 7,3 6,3 5,6 5,4 5 4,4 3,9 3,3 2,6 1,9
44 8,7 8,6 7,2 6,8 5,6 5,4 4,9 4,3 3,8 3,2 2,6 2,6 1,9
46 8,4 7,1 6,6 5,5 5,3 4,7 4,1 3,7 3,1 2,6 2,5 1,8
48 6,5 5,4 4,7 5,2 4,6 4,1 3,6 3,1 2,6 2,5 1,8
50 6,4 5,4 4,7 4,5 4,2 4 3,5 3 2,5 2,4 1,8
54 4,7 4,4 4 3,9 3,3 3 2,9 2,4 2,3 1,7
58 4,6 3,8 3,2 2,8 2,8 2,2 1,8 2,1 1,5
62 3,7 3,1 2,7 2,1 1,7 2
66 2,6 2,1 1,6 1,8
70 2,5 1,6
74 1,5
* Denotes SF-A-SL
54,2m 22-66m 360° 116,7t
82°-65°
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne35
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
DEMAG AC 350-6LIFTING CAPACITIES ON LUFFING FLY JIB WITH SUPERLIFT
116,7t CounterweightMain Boom (m)
58,7
Fixed Jib (m)
22* 24 30 36 42 48 54
Offset 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65°Radius (m)18 9,720 9,4 9,1 6,7 622 9,1 8,9 6,7 6 524 8,8 8,6 6,7 5,9 4,9 3,726 8,6 8,4 6,6 5,8 4,7 3,6 2,328 8,3 8,2 6,5 5,7 4,5 3,5 2,330 7,7 8 6,4 5,5 4,4 3,4 2,332 7,5 6,3 5,4 4,3 3,3 2,334 7,2 7,1 6,1 5 5,2 4,1 3,2 2,236 7 7 6 5 5,1 4,3 4 3,1 2,138 6,8 6,8 5 5 4,3 3,9 2,9 240 6,7 5 4,9 4,3 3,8 3,4 2,9 242 6,2 4,9 4,8 4,2 3,7 3,3 2,8 2,1 1,944 6 6 4,9 4,1 3,6 3,2 2,7 2,1 1,846 5,8 5,8 4,8 4 4 3,5 3 2,6 2,1 1,748 5,7 4 4 3,5 3 2,6 2,1 1,750 4 3,9 3,2 2,9 2,5 2 1,654 3,9 3,2 2,7 2,4 2,4 1,858 3,1 2,6 2,2 1,762 2,1 1,766 2
* Denotes SF-A-SL
58,7 22-54m 360° 116,7t
82°-65°
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne50
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
LIEBHERR LTM1500DIMENSIONS
HOOKBLOCK
Vehicle weight 96,00kg Capacity 171te 84te 37te 12,5
Weight 2750kg 1800kg 1230kg 600kg
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne50
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
LIEBHERR LTM1500MAIN BOOM DUTIES
Lifting capacities on guyed telescopic boom — 165 t counterweightRadius 31,7m 36,9m 42,1m 47,3m 52,5m 57,7m 62,9m 68,1m 73,4m 78,6m 84m(m)5 204 6 198 167 7 190 162 127 8 170 157 123 121 9 154 147 119 117 111 10 140 135 115 113 107 96 12 120 114 108 105 101 91 81 14 103 104 96 96 91 86 77 70 62 16 93 93 86 86 83 79 74 66 59 52 4418 83 83 82 79 75 73 69 63 57 49,5 4220 73 74 74 73 70 67 65 59 54 47,5 40,522 65 67 67 66 66 61 60 55 52 45,5 38,524 59 60 60 61 60 57 55 52 49 44 36,526 53 55 54 55 54 53 51 49,5 45,5 42 3528 47,5 49,5 49 50 48,5 50 47 46,5 42 40 33,530 36,5 45 44,5 46 44,5 45,5 43 43 39 38,5 3232 41 40,5 42 40,5 41,5 39,5 40 36,5 36 30,5 34 36,5 37 38,5 37 38 36 37 33,5 33,5 29,436 34 35,5 34 35 33 34 30,5 31 28,138 31,5 32,5 31 32 30,5 31,5 28,3 28,7 26,940 24,6 30 28,7 29,7 27,8 28,8 26 26,5 25,842 27,9 26,4 27,5 25,6 26,6 24 24,6 24,244 24,7 24,4 25,4 23,5 24,5 22 22,8 22,546 15,2 22,5 23,5 21,7 22,6 20,1 21,1 20,848 20,8 21,8 20 20,9 18,4 19,4 19,350 16 20,3 18,4 19,4 16,8 17,8 17,952 18,9 16,9 17,9 15,4 16,4 16,654 16,2 15,6 16,6 14,1 15,1 15,256 10,8 14,4 15,3 12,8 13,8 1458 12,6 14,2 11,7 12,7 12,860 9,3 13,1 10,6 11,6 11,862 12,1 9,6 10,6 10,864 9,7 8,7 9,6 9,866 7,8 8,7 8,968 5,9 7,9 8,170 7 7,372 5,9 6,674 4,1 5,876 578 3,8
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne50
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
LIEBHERR LTM1500FLY JIB DUTIES
* A
dapt
er
** O
ptio
n
Lifting capacities for lattice extension (hydraulic offset and luffing) — 56m — 165 t counterweight
47,3m + 2,2m*Radius 6m** 14m 21m 28m 35m 42m 49m 56m(m) 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 0º 0º9 9310 93 6712 91 65 38,5 61 4614 82 61 37 57 42,5 31,5 24,516 74 57 35,5 54 31,5 39,5 29,2 22,7 17,5 13,118 67 53 34,5 51 30,5 37,5 19,5 27,4 21,2 16,3 12,2 9,820 61 50 33,5 48 29,4 20,1 35 18,7 25,7 19,9 15,3 11,3 922 55 47 32,5 45,5 28,5 19,9 33 18,1 24,3 12,4 18,8 14,4 10,6 8,424 50 44,5 31,5 43 27,8 19,8 31 17,4 11,7 23 11,9 17,8 13,6 9,9 7,826 45,5 42 30,5 40,5 27,1 19,7 29,5 16,9 11,5 21,7 11,4 16,8 8,6 12,9 9,3 7,328 40,5 40 29,8 38,5 26,5 19,6 27,9 16,4 11,4 20,4 11 15,8 8,2 12,1 8,8 6,830 36 37,5 29,1 37 25,9 19,6 26,6 15,9 11,3 19,3 10,6 7 14,9 7,9 11,5 5,9 8,3 6,432 32,5 33,5 28,5 34,5 25,4 19,5 25,3 15,5 11,1 18,4 10,3 6,8 14 7,5 10,8 5,6 7,8 634 28,8 29,8 27,9 31 25 19,5 24 15,1 11,1 17,5 10 6,7 13,3 7,2 10,2 5,3 7,3 5,636 25,7 26,6 27,2 28,1 24,5 19,5 22,8 14,8 11 16,7 9,7 6,6 12,7 6,9 4,3 9,6 5 6,9 5,238 22,9 23,8 24,3 25,4 24,1 19,5 21,7 14,5 11 15,8 9,4 6,4 12,2 6,6 4,1 9,2 4,8 6,5 4,940 20,4 21,2 21,6 22,9 23,8 19,5 20,8 14,2 11 15 9,2 6,4 11,5 6,4 4 8,8 4,5 6,1 4,542 18,2 18,8 20,6 22,3 19,5 20 13,9 11 14,3 9 6,3 10,9 6,2 3,9 8,3 4,3 5,8 4,244 16,2 16,7 18,6 20,1 19,5 19,3 13,6 11 13,7 8,8 6,3 10,4 6 3,7 7,9 4,1 5,5 3,946 14,3 14,8 16,7 18,1 18,9 18,2 13,5 11 13,2 8,6 6,3 9,8 5,9 3,7 7,5 3,9 5,2 3,748 12,6 13 15 16,2 17 16,5 13,3 11 12,7 8,4 6,3 9,4 5,7 3,6 7 3,8 4,9 3,550 10,5 13,4 14,5 14,9 13,2 11 12,2 8,2 6,3 9 5,6 3,6 6,7 3,7 4,7 3,352 6,4 12 13 13,4 13 11 11,7 8,1 6,3 8,7 5,4 3,6 6,4 3,6 4,4 354 10,7 11,5 12,1 12,9 11 11,3 8 6,3 8,3 5,3 3,6 6,1 3,5 4,1 2,856 9,4 10,1 10,8 12,2 11 10,9 8 6,3 8 5,2 3,6 5,9 3,4 3,9 2,758 7,4 9,7 10,9 10,5 7,9 6,3 7,7 5,1 3,6 5,6 3,3 3,7 2,560 8,6 9,7 9,6 7,8 6,3 7,4 5,1 3,6 5,4 3,3 3,6 2,362 7,6 8,5 8,6 7,7 6,3 7,1 5 3,6 5,2 3,2 3,4 2,264 6,1 7,4 7,7 7,7 6,8 4,9 3,6 4,9 3,1 3,3 266 4 6,8 7,6 6,6 4,9 3,6 4,7 3,1 3,1 1,968 5,9 7 6,4 4,8 3,6 4,5 3 3 1,870 4,7 6,1 6,1 4,8 3,6 4,4 3 2,872 3,3 5,4 4,7 4,3 3 2,774 4,7 4,7 4,2 2,9 2,676 3,9 4,7 4 2,9 2,578 2,7 4,3 3,9 2,9 2,480 3,7 2,9 2,382 2,9 2,9 2,284 1,9 2,9 2,186 288 1,9
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne50
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
LIEBHERR LTM1500FLY JIB DUTIES
Lifting capacities for lattice extension (hydraulic offset and luffing) — 56m — 165 t counterweight
57,7m + 2,2m*Radius 6m** 14m 21m 28m 35m 42m 49m 56m(m) 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 0º 0º12 6914 68 62 38 55 42,516 65 58 36,5 52 39,5 29,118 60 55 35,5 49,5 32 37,5 27,3 21,120 55 53 34,5 47,5 31 35,5 25,9 19,9 15,2 11,922 51 50 33,5 45,5 30,5 20,6 34 18,9 24,7 18,8 14,4 11,2 8,424 46,5 46,5 32,5 43 29,7 20,6 32,5 18,4 23,5 18 13,7 10,6 7,826 43 43 32 40 29,1 20,5 31 17,9 22,5 12,8 17,2 13,1 10,1 7,428 39,5 40 31 37 28,5 20,5 29,7 17,4 11,8 21,6 12,4 16,4 12,5 9,6 6,930 36,5 37 30,5 34,5 28 20,4 28,5 17 11,7 20,7 12 15,7 8,1 12 9,2 6,632 33 34 29,8 32 27,5 20,4 27,3 16,6 11,6 19,9 11,7 6,9 15,1 7,9 11,5 5,5 8,7 6,234 30 31 29,2 30 27 20,4 26,3 16,3 11,6 19,1 11,3 6,8 14,5 7,6 11 5,3 8,3 5,936 27,1 28,1 28,7 28 26,5 20,4 25,4 16 11,5 18,3 11 6,8 13,9 7,4 10,5 5,1 7,9 5,638 24,5 25,4 26 25,6 26,1 20,4 24,4 15,7 11,5 17,7 10,7 6,7 13,4 7,1 4,2 10 4,9 7,6 5,340 22 22,8 23,3 23,4 25,1 20,4 22,8 15,4 11,5 17,1 10,5 6,7 12,8 6,9 4,1 9,6 4,7 7,2 542 19,8 20,5 21 21,3 23,1 20,4 21,4 15,2 11,5 16,6 10,3 6,6 12,4 6,7 4 9,2 4,6 6,9 4,744 17,7 18,4 18,8 19,5 21,1 20,4 20 15 11,5 16 10,1 6,6 11,9 6,5 3,9 8,8 4,4 6,5 4,546 15,9 16,5 16,8 17,6 19,1 20,2 18,3 14,7 11,5 15,3 9,9 6,6 11,5 6,4 3,9 8,5 4,3 6,2 4,248 14,2 14,7 15 15,9 17,3 18,2 16,8 14,5 11,5 14,7 9,7 6,6 11,1 6,3 3,8 8,2 4,1 6 450 12,6 13,1 14,3 15,6 16,5 15,3 14,3 11,5 14,2 9,6 6,6 10,6 6,1 3,8 7,9 4 5,7 3,852 11,2 11,6 12,9 14,1 14,8 13,9 14,2 11,5 13,8 9,4 6,6 10,1 6 3,8 7,5 3,9 5,5 3,654 9,8 10,2 11,5 12,6 13,3 12,5 14,1 11,5 13,2 9,2 6,6 9,7 5,9 3,8 7,2 3,8 5,3 3,456 8,6 8,9 10,3 11,3 11,8 11,3 12,9 11,5 12,1 9,1 6,6 9,4 5,8 3,8 6,8 3,8 5 3,258 7,5 7,7 9,2 10,1 10,1 11,6 11,5 10,9 9 6,6 9,1 5,6 3,8 6,5 3,7 4,8 360 5,6 8,1 8,9 9 10,4 11,3 9,8 8,9 6,6 8,8 5,5 3,8 6,3 3,6 4,6 2,962 7,1 7,8 8 9,3 10,1 8,8 8,9 6,6 8,5 5,4 3,8 6,1 3,5 4,3 2,764 6,2 6,8 7,1 8,3 8,9 7,9 8,8 6,6 8,3 5,4 3,8 5,9 3,5 4,2 2,666 5,1 5,8 6,2 7,3 7 8,5 6,6 7,8 5,3 3,8 5,7 3,4 4 2,468 3,6 5,4 6,3 6,2 7,6 6,6 6,9 5,3 3,8 5,5 3,4 3,9 2,370 4,7 5,4 5,4 6,7 6,6 6,1 5,3 3,8 5,3 3,3 3,7 2,272 4 4,7 4,7 5,8 5,4 5,2 3,8 5,1 3,3 3,6 2,174 2,8 3,7 4,2 5 4,8 5,2 3,8 5 3,3 3,5 276 3,6 4,4 4,2 5,1 3,8 4,5 3,2 3,3 1,978 3 3,8 3,7 4,8 4 3,2 3,2 1,780 1,9 3,2 3,2 4,2 3,6 3,2 3,1 1,782 2,6 3,7 3,1 3,1 3 1,684 2,1 3,1 2,5 3,1 2,9 1,586 2,4 2 3,1 2,488 1,7 1,5 2,8 1,990 2,1 1,492 1,5*
Ada
pter
**
Opt
ion
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne50
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
LIEBHERR LTM1500FLY JIB DUTIES
* A
dapt
er
** O
ptio
n
Lifting capacities for lattice extension (hydraulic offset and luffing) — 56m — 165 t counterweight
68,1m + 2,2m*Radius 6m** 14m 21m 28m 35m 42m 49m 56m(m) 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 0º 0º14 5016 49,5 50 4218 47,5 47,5 35,5 40,5 3220 45 45 34,5 38 30,5 30,5 23,8 22 42,5 42,5 34 36 29,7 29,3 22,7 17,8 24 40,5 40 33 34,5 28,8 21,1 28,1 18,9 21,7 17 12,8 26 38,5 37,5 32,5 33 27,9 21,1 27,1 18,5 20,9 16,3 12,3 9,6 6,828 36 35,5 31,5 31,5 27,1 21,1 26,1 18,1 20,1 12,4 15,7 11,8 9,2 6,430 33,5 33 31 29,9 26,4 21,1 25,2 17,8 12,1 19,4 12,1 15,1 11,3 8,8 6,132 31,5 31 30,5 28,2 25,7 21.1 24,4 17,4 12 18,8 11,8 14,6 10,9 8,5 5,834 29,2 29,1 29,2 26,5 25 21 23,6 17,1 12 18,1 11,6 14,1 7,6 10,6 8,1 5,536 27,2 27,3 27,4 24,9 24,5 20,7 22,7 16,8 12 17,5 11,3 6,8 13,6 7,4 10,2 4,9 7,8 5,338 24,8 25,6 25,9 23,4 23,5 20,4 21,4 16,6 12 17 11,1 6,8 13,1 7,2 9,9 4,8 7,6 540 22,7 23,5 24,1 22 22,2 20,2 20,2 16,3 12 16,4 10,9 6,8 12,7 7,1 9,6 4,6 7,3 4,842 20,6 21,4 22 20,7 21 19,9 19,1 15,9 12 15,9 10,7 6,8 12,3 6,9 4 9,3 4,5 7,1 4,644 18,8 19,5 20 19,5 19,8 19,8 18 15,5 12 15,4 10,5 6,7 11,9 6,7 3,9 9 4,4 6,8 4,446 17,1 17,8 18,2 17,9 18,7 19,3 17 15,2 12 15 10,3 6,7 11,5 6,6 3,9 8,7 4,3 6,6 4,248 15,5 16,1 16,4 16,4 17,7 18,2 16 14,9 12 14,6 10,2 6,7 11,2 6,4 3,9 8,5 4,2 6,3 450 13,9 14,5 14,8 15 16,4 17,2 15,1 14,6 12 13,9 10 6,7 10,8 6,3 3,8 8,2 4,1 6,1 3,852 12,4 13 13,3 13,7 15 15,9 14,1 14,3 12 13,1 9,9 6,7 10,5 6,2 3,8 8 4 5,8 5,754 11,1 11,6 11,9 12,4 13,6 14,4 12,9 14 12 12,4 9,8 6,7 10,2 6,1 3,8 7,8 3,9 5,6 3,556 9,9 10,3 10,5 11,2 12,3 13 11,8 13,5 12 11,7 9,7 6,7 10 6 3,8 7,5 3,8 5,5 3,358 8,7 9,1 10 11,1 11,7 10,8 12,3 12 11,1 9,5 6,7 9,7 5,9 3,8 7,2 3,8 5,3 3,260 7,7 8 9 9,9 10,5 9,7 11,2 11,9 10,1 9,4 6,7 9,3 5,8 3,8 7 3,7 5,1 362 6,7 7 8 8,9 9,4 8,7 10,1 11,1 9,2 9,2 6,7 9 5,8 3,8 6,7 3,7 4,9 2,964 5,7 6 7 7,8 8,3 7,7 9,1 9,9 8,3 9,1 6,7 8,6 5,7 3,8 6,5 3,6 4,8 2,866 4,9 5,1 6,2 6,9 6,9 8,1 8,9 7,5 8,9 6,7 7,8 5,6 3,8 6,3 3,6 4,6 2,668 4,1 4,1 5,3 6 6 7,2 7,9 6,6 8,2 6,7 7 5,5 3,8 6,1 3,5 4,4 2,570 2,7 4,6 5,1 5,3 6,3 6,9 5,8 7,4 6,7 6,3 5,5 3,8 5,9 3,5 4,2 2,472 4,1 4,5 4,6 5,5 5,1 6,5 6,7 5,5 5,5 3,8 5,7 3,4 4,1 2,374 3,5 3,9 4,1 4,8 4,5 5,7 6,6 4,9 5,4 3,8 5,1 3,4 4 2,276 2,5 3,2 3,5 4,2 4 5 5,7 4,4 5,4 3,8 4,5 3,4 3,9 2,178 2,9 3,6 3,5 4,4 4,9 3,8 5,1 3,8 4 3,3 3,7 280 2,3 3 2,9 3,9 3,3 4,5 3,8 3,4 3,3 3,6 1,982 1,5 2,3 2,3 3,3 2,8 4 3,8 2,9 3,3 3,1 1,884 1,8 2,7 2,3 3,5 3,8 2,4 3,3 2,6 1,786 2,1 1,7 3 1,9 3,3 2,2 1,688 1,4 2,4 1,5 2,9 1,7 1,690 1,8 2,4 92 1,9 94 1,4
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne50
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
LIEBHERR LTM1500FLY JIB DUTIES
Lifting capacities for lattice extension (hydraulic offset and luffing) — 56m — 165 t counterweight
78,6m + 2,2m*Radius 6m** 14m 21m 28m 35m 42m(m) 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º19 3718 35,5 33,5 28,9 20 34 32,5 32,5 27,6 22,5 22 32 31,5 31 26,4 21,4 17,424 29,4 29,4 30 25,4 23 20,5 16,6 26 29,4 29,4 29,2 24,5 22,2 19,7 15,8 12,7 28 28,2 28,2 28,3 23,7 21,4 18,8 19 15,8 15,2 12,2 9,930 27,1 27,1 27,2 22,8 20,7 18,3 18,3 15,3 14,6 11,7 9,5 32 25,9 25,9 25,9 21,9 20,1 17,9 17,7 14,9 14 11,2 9,1 34 24,9 24,7 24,7 21,1 19,5 17,5 17,2 14,5 11,9 13,5 10,8 10,8 8,7 36 23,7 23,6 23,7 20,3 18,9 17,1 16,6 14,1 11,7 13,1 10,5 10,4 8,438 22,5 22,5 22,6 19,5 18,4 16,7 16,1 13,7 11,5 12,6 10,2 10,1 7,1 8,1 40 21,2 21,4 21,4 18,6 17,9 16,3 15,6 13,4 11,2 12,2 9,9 6,6 9,7 7 7,8 42 20 20,2 20,3 17,8 17,4 16 15,1 13 11 11,8 9,6 6,6 9,4 6,9 7,5 4,444 18,9 19,1 19,2 17 16,8 15,6 14,6 12,6 10,8 11,4 9,3 6,6 9,1 6,8 7,3 4,346 17,7 18,1 18,2 16,2 16,2 15,2 14,2 12,3 10,6 11,1 9,1 6,6 8,8 6,7 3,8 7 4,248 16,2 16,8 17,3 15,3 15,5 14,8 13,7 11,9 10,3 10,7 8,8 6,6 8,5 6,5 3,8 6,8 4,250 14,8 15,4 15,8 14,5 14,7 14,4 13,1 11,6 10,1 10,3 8,5 6,6 8,2 6,4 3,8 6,5 4,152 13,5 14 14,4 13,7 14 14,1 12,6 11,3 9,9 10 8,3 6,6 7,9 6,2 3,8 6,3 454 12,3 12,8 13,2 13 13,2 13,8 11,9 11 9,8 9,7 8,1 6,6 7,6 6,1 3,8 6,1 3,956 11,1 11,6 11,9 11,9 12,6 13,2 11,3 10,6 9,6 9,4 7,8 6,6 7,4 5,9 3,8 5,9 3,958 10 10,4 10,7 10,8 11,9 12,6 10,7 10,3 9,4 9,1 7,6 6,5 7,1 5,7 3,8 5,6 3,960 8,9 9,3 9,6 9,9 10,9 11,6 10,1 10 9,2 8,8 7,4 6,4 6,9 5,5 3,8 5,4 3,862 7,9 8,3 8,5 8,9 9,9 10,5 9,3 9,8 9 8,6 7,2 6,2 6,7 5,4 3,8 5,2 3,764 7 7,3 7,5 8 8,9 9,4 8,4 9,5 8,8 8,3 7 6 6,5 5,3 3,8 5,1 3,766 6,1 6,4 7,1 8 8,5 7,6 8,9 8,6 7,6 6,7 5,9 6,3 5,1 3,8 4,9 3,568 5,3 5,6 6,3 7,1 7,5 6,8 8,1 8,4 6,9 6,5 5,8 6,1 5 3,8 4,7 3,470 4,6 4,8 5,5 6,2 6,6 6 7,2 7,9 6,2 6,3 5,6 5,9 4,8 3,8 4,5 3,272 4 4,2 4,8 5,4 5,8 5,3 6,4 7,1 5,5 6,2 5,5 5,7 4,6 3,8 4,4 3,174 3,4 3,6 4,3 4,8 4,7 5,6 6,2 4,9 6 5,4 5,1 4,5 3,7 4,2 376 2,7 3 3,7 4,2 4,1 4,9 5,4 4,3 5,5 5,2 4,5 4,3 3,6 4,1 2,878 1,9 2,2 3,2 3,6 3,6 4,4 4,7 3,7 4,9 5,1 3,9 4,2 3,5 3,9 2,780 2,6 3,1 3,1 3,8 3,2 4,3 4,9 3,4 4,1 3,5 3,6 2,582 2 2,4 2,5 3,3 2,7 3,8 4,4 2,9 4 3,4 3,1 2,484 1,4 1,8 2 2,7 2,2 3,2 3,8 2,4 3,8 3,3 2,6 2,286 1,4 2,1 1,7 2,7 3,2 1,9 3,2 3,2 2,1 2,188 1,5 2,2 1,5 2,7 3 1,7 1,990 1,6 2,2 2,8 1,792 1,7 2,4 1,594 1,3*
Ada
pter
**
Opt
ion
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne50
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
LIEBHERR LTM1500FLY JIB DUTIES
* A
dapt
er
** O
ptio
n
Lifting capacities for lattice extension (hydraulic offset and luffing) — 56m — 165 t counterweight
47,3m + 2,2m*Radius 6m** 14m 21m 28m 35m 42m 49m 56m(m) 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 0º 0º9 9310 91 12 87 65 74 5314 84 61 42,5 69 49,5 38 16 74 57 41 64 40 46,5 35,5 28,5 23,718 67 54 40 61 39,5 43,5 33 26,7 22,2 17,820 60 51 38,5 57 38,5 24,7 41 24,7 31 25,2 20,9 16,7 13,522 55 49 37,5 53 37 24,7 39 24,6 29,5 23,7 19,7 15,8 12,824 49,5 46,5 37 48,5 36 24,7 37 24,3 13,5 27,9 14,7 22,5 18,6 15 12,126 45 44,5 36 45 34,5 24,4 35 24,1 13,6 26,4 14,4 21,3 12,5 17,7 14,1 11,428 40 41,5 35,5 41 33,5 23,9 33,5 23,9 13,8 25,3 14,2 20,1 12,3 16,8 13,5 10,830 35,5 37 34,5 37,5 32,5 23,5 32 23,5 14,1 24,1 14,1 8,8 19,3 12 15,9 8,8 12,8 10,232 31,5 33 33,5 34 31,5 23,2 30,5 22,7 14,4 22,9 13,9 8,8 18,4 11,7 15,2 8,5 12,1 9,734 28,3 29,3 30 30,5 30,5 22,8 29,1 22 14,5 21,8 13,8 8,8 17,6 11,5 14,5 8,3 11,5 9,236 25,2 26,1 26,7 27,7 29,9 22,6 27,8 21,3 14,4 20,9 13,7 8,8 16,7 11,3 5,6 13,9 8,1 11 8,738 22,4 23,2 23,7 24,9 26,9 22,3 26,2 20,7 14,3 20,1 13,6 8,8 16 11,1 5,5 13,2 8 10,5 8,340 19,9 20,7 22,4 24,3 22,1 23,9 20,1 14,1 19,2 13,6 8,8 15,4 11 5,5 12,5 7,8 10,1 7,942 17,6 18,3 20,1 21,9 22 21,7 19,6 13,9 18,3 13,4 8,8 14,7 10,8 5,5 12,1 7,7 9,6 7,644 15,6 16,2 18,1 19,7 20,7 19,6 19 13,7 17,6 13,3 8,8 14,1 10,7 5,5 11,6 7,5 9,1 7,246 13,8 14,2 16,2 17,6 18,5 17,7 18,6 13,5 17 13,2 8,8 13,5 10,6 5,5 11,1 7.4 8,7 6,848 12,1 12,5 14,5 15,8 16 18,1 13,4 16,3 13 8,8 13 10,3 5,5 10,7 7,3 8,4 6,550 10,1 13 14,1 14,5 16,3 13,3 15,6 12,8 8,8 12,5 10,1 5,5 10,2 7,2 8 6,252 6,4 11,5 12,5 13 14,7 13,2 14,1 12,5 8,8 12 9,8 5,5 9,8 7,1 7,7 5,954 10,2 11 11,7 13,2 13,2 12,7 12,2 8,8 11,4 9,6 5,5 9,4 6,9 7,3 5,656 8,9 9,6 10,4 11,8 11,5 11,9 8,8 10,9 9,4 5,5 9 6,8 7 5,358 6,9 9,2 10,5 10,3 11,5 8,8 10,5 9,1 5,5 8,6 6,6 6,7 560 8,2 9,3 9,2 11 8,8 10,1 8,9 5,5 8,1 6,5 6,3 4,862 7,2 8,1 8,2 9,8 9,2 8,6 5,5 7,7 6,3 6 4,564 5,6 7 7,3 8,7 8,3 8,4 5,5 7,5 6,1 5,7 4,366 3,6 6,4 7,7 7,4 8,2 5,5 7,2 5,9 5,4 4,168 5,6 6,7 6,5 8,1 5,5 6,9 5,7 5,1 3,970 4,4 5,7 5,8 7,3 6,3 5,6 4,9 3,772 2,9 5 6,4 5,6 5,5 4,7 3,574 4,4 4,5 4,9 5,3 4,5 3,376 3,5 4,7 4,4 5,2 4,3 3,278 2,4 4,1 3,9 5 4,1 380 3,4 4,4 3,7 2,982 2,6 3,8 3,3 2,784 1,5 3,3 2,8 2,686 2,2 2,488 1,5 2,190 1,6
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne50
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
LIEBHERR LTM1500FLY JIB DUTIES
Lifting capacities for lattice extension (hydraulic offset and luffing) — 56m — 165 t counterweight
57,7m + 2,2m*Radius 6m** 14m 21m 28m 35m 42m 49m 56m(m) 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 0º 0º12 8214 77 62 16 69 59 42 67 46,5 35,518 62 56 40,5 64 40 44 33,5 26 21,520 56 54 39,5 59 39 42 32 24,7 20,4 16,222 51 51 38,5 54 37,5 24,7 39,5 24,3 30 23,5 19,3 15,4 12,524 46,5 47 38 49 36,5 24,7 38 24,4 28,7 22,3 18,4 14,6 12,526 42,5 43,5 37 45 35,5 24,7 36,5 24,5 27,5 15,2 21,2 17,6 14 1228 39 40 36 41,5 34,5 24,7 34,5 24,6 13,1 26,3 15,1 20,4 16,7 13,3 11,530 36 36,5 35,5 38,5 33,5 24,3 33 24,1 13,4 25 15,1 19,5 11,8 16 12,6 10,932 32,5 33,5 34 35,5 32,5 23,9 32 23,3 13,8 24,1 15,1 9 18,6 11,6 15,3 12,1 10,434 29,4 30,5 31,5 33 31,5 23,6 29,8 22,6 14,1 23,2 15,1 9,1 17,8 11,5 14,6 8,2 11,6 9,936 26,6 27,6 28,3 30 29,5 23,4 27,7 22,1 14,4 22,3 15,1 9,2 17,2 11,4 14 8,1 11,1 9,538 23,9 24,9 25,5 27,5 27,2 23,1 25,4 21,5 14,6 21,4 15,1 9,4 16,5 11,4 5,3 13,5 8,1 10,6 9,140 21,5 22,3 22,8 25,1 24,8 22,8 23,3 20,9 14,4 20,6 14,9 9,6 15,9 11,3 5,3 13 8 10,2 8,642 19,2 20 20,4 22,9 22,7 22,6 21,3 20,3 14,2 19,9 14,6 9,8 15,2 11,2 5,3 12,5 7,9 9,8 8,344 17,2 17,9 18,3 20,8 20,6 21,8 19,5 19,9 14 19,2 14,3 10 14,7 11,1 5,4 12 7,8 9,4 7,946 15,3 15,9 16,3 19 18,6 19,7 17,8 19,4 13,8 18,2 14 9,8 14,2 11 5,5 11,5 7,8 9 7,648 13,6 14,2 17,1 16,8 17,8 16,3 18,5 13,6 16,7 13,7 9,7 13,8 10,8 5,6 11,1 7,7 8,6 7,350 12 12,6 15,4 15,1 16 14,8 16,9 13,5 15,3 13,4 9,5 13,3 10,6 5,8 10,7 7,6 8,3 752 10,3 11,1 13,8 13,6 14,4 13,4 15,3 13,3 14 13,1 9,3 12,8 10,5 5,9 10,4 7,5 8 6,654 8,8 9,5 12,4 12,2 12,8 12,1 13,8 13,1 12,8 12,8 9,2 12,3 10,2 6 10 7,4 7,7 6,356 7,4 7,9 11 10,8 10,8 12,5 12,8 11,6 12,4 9,1 11,8 9,9 6,1 9,6 7,3 7,4 6,158 5,9 6,5 9,8 9,6 9,7 11,2 12,2 10,5 11,9 9 11,2 9,7 6,2 9,3 7,1 7,2 5,960 4,5 8,7 8,4 8,6 10 10,9 9,4 11,4 8,9 10,2 9,4 6,1 8,9 6,9 6,9 5,662 7,6 7,3 7,6 8,9 8,4 10,2 8,8 9,2 9,2 6 8,5 6,7 6,6 5,464 6,5 6,2 6,6 7,8 7,5 9,2 8,8 8,3 9 5,9 8,2 6,5 6,3 5,266 5,4 4,9 5,8 6,8 6,6 8,2 8,7 7,4 8,8 5,8 7,8 6,3 6,1 4,968 4,2 4,9 5,9 5,7 7,2 8 6,5 8,5 5,8 6,9 6,1 5,8 4,770 3 4 5 5 6,3 5,8 7,6 5,7 6,2 6 5,6 4,672 3 3,8 4,4 5,5 5 6,7 5,7 5,4 5,8 5,3 4,474 2 3,8 4,7 4,4 5,9 5,4 4,8 5,7 5,1 4,276 2,9 4 3,9 5,1 4,2 5,5 4,6 478 2 3 3,4 4,5 3,7 5,2 4,1 3,880 1,9 2,7 3,9 3,2 4,6 3,6 3,682 1,9 3,2 2,7 4,1 3,1 3,184 2,2 2,1 3,5 2,6 2,686 1,6 3 2,1 2,288 2,4 1,6 1,790 1,8*
Ada
pter
**
Opt
ion
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne50
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
LIEBHERR LTM1500FLY JIB DUTIES
* A
dapt
er
** O
ptio
n
Lifting capacities for lattice extension (hydraulic offset and luffing) — 56m — 165 t counterweight
68,1m + 2,2m*Radius 6m** 14m 21m 28m 35m 42m 49m 56m(m) 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 0º 0º16 6018 56 55 48,5 20 52 52 39,5 46 38,5 29,322 47,5 48,5 38,5 43,5 37 28,1 22,624 43,5 44,5 37,5 40,5 36,5 35 27 21,7 17,226 40 40,5 37 38,5 35,5 24,7 33,5 24,1 26 20,8 16,4 12,9 28 37 37,5 36,5 36 34,5 24,5 31,5 24 24,9 20 15,8 12,4 10,530 34 34,5 35 33,5 33 24,2 30 23,6 12,6 24 14,6 19,2 15,2 11,9 10,132 31,5 32 32,5 31 32 23,9 28,4 23 13,1 23,2 14,7 18,5 14,6 11,4 9,734 28,2 29,8 30,5 28,7 29,9 23,6 26,9 22,4 13,6 22,4 14,9 17,9 10,9 14 10,9 9,336 25,5 27,2 28,1 26,7 27,9 23,3 25,7 21,9 14,1 21,6 15,1 8,7 17,2 10,9 13,5 10,5 8,938 23,2 24,7 25,7 24,8 26 23,1 24,2 21,3 14,6 20,8 15,2 8,9 16,6 11 13,1 7,5 10,1 8,540 20,9 22,1 23,2 22,7 24,2 22,9 22,7 20,8 14,4 20 15 9,2 16,1 11,1 12,6 7,5 9,8 8,242 18,6 19,7 20,8 20,8 22,6 22,7 21 20,4 14,2 19,2 14,7 9,6 15,6 11,1 4,8 12,1 7,6 9,4 7,944 16,6 17,9 18,6 19 20,7 22,1 19,3 19,9 14 18,4 14,4 9,8 15,1 11,1 4,9 11,8 7,6 9 7,646 15 16 16,7 17,4 19 20,3 17,7 19,5 13,9 17,5 14,1 9,7 14,7 11 5 11,4 7,6 8,7 7,348 13,3 14,2 14,8 15,6 17,4 18,5 16,2 18,4 13,7 16,4 13,8 9,7 14,2 10,9 5,1 11 7,6 8,4 750 11,7 12,4 13 14,2 15,9 17 14,9 16,9 13,6 15,1 13,5 9,6 13,7 10,8 5,3 10,7 7,6 8,2 6,752 10,1 11 11,4 12,8 14,5 15,5 13,6 15,5 13,4 13,9 13,2 9,4 13,1 10,5 5,5 10,3 7,7 7,9 6,554 8,8 9,6 11,4 13 14 12,3 14,3 13,1 12,7 12,9 9,3 12,6 10,3 5,7 9,9 7,7 7,6 6,356 7,6 8,2 10 11,6 12,6 11 13 12,8 11,6 12,4 9,2 11,8 10,1 5,9 9,5 7,5 7,3 658 6,3 6,8 8,6 10,2 11,1 9,8 11,9 12,5 10,9 12 9,1 10,8 9,9 5,9 9 7,3 7,1 5,860 5,1 5,6 7,5 8,7 9,6 8,6 10,8 11,8 9,7 11,5 9 9,9 9,6 5,9 8,6 7,1 6,9 5,662 3,9 4,5 6,4 7,6 7,4 9,6 10,6 8,8 10,7 8,9 9 9,4 5,9 8,2 6,9 6,7 5,364 2,9 3,3 5,4 6,4 6,3 8,3 9,2 7,9 9,8 8,8 8,2 9,2 5,9 7,8 6,7 6,4 5,266 1,9 2,2 4,3 5,3 5,3 7,1 7,8 6,8 8,8 8,7 7,4 9 5,9 7,3 6,5 6,2 568 3,2 4,2 4,4 6 6,5 5,7 7,8 7,9 6,6 8,7 5,8 6,7 6,4 6 4,870 2,5 3,1 3,5 5 4,8 6,9 7,1 5,9 7,9 5,7 6 6,2 5,8 4,672 1,8 2,3 2,6 3,9 4 5,8 6,3 5,1 7 5,7 5,3 6,1 5,4 4,574 1,6 2,9 3,2 4,7 5,5 4,4 6,2 5,3 4,7 5,9 4,8 4,376 1,9 2,4 3,8 3,6 5,5 4,9 4,1 5,6 4,2 478 1,5 2,9 2,9 4,6 4,5 3,6 5 3,7 3,580 2 2,2 3,7 4 3 4,5 3,1 382 3 3,4 2,5 4 2,5 2,584 2,2 2 3,4 1,9 1,986 1,5 1,5 2,9 1,6 1,488 2,4 90 1,8
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne50
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
LIEBHERR LTM1500FLY JIB DUTIES
Lifting capacities for lattice extension (hydraulic offset and luffing) — 56m — 165 t counterweight
78,6m + 2,2m*Radius 6m** 14m 21m 28m 35m 42m(m) 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º20 3522 33 32 30,5 27,7 24 31,5 30,5 29,3 26,4 22 26 29,6 29,1 28,1 25,3 22,6 21 17 28 27,6 27,7 27 24,1 21,7 20,1 16,3 13,8 12,5 30 25,6 26,4 26 23,1 20,9 18,9 19,3 15,7 15,6 13,2 12,3 32 23,5 25 24,7 22,2 20,1 18,8 18,5 15,5 15 12,7 11,8 34 22 23,4 23,3 21,3 19,4 18,2 17,7 15,1 11,4 14,3 10,3 12,1 11,3 36 20,4 21,8 21,9 20,3 18,7 17,7 17 14,7 11,4 13,7 10 11,6 10,9 38 18,9 20,1 20,5 19,3 18 17,1 16,3 14,3 11,4 13,2 9,8 11,1 6,6 10,4 40 17,4 18,5 19 18,3 17,4 16,6 15,7 13,8 11,4 12,7 9,7 6,2 10,7 6,4 10 42 16,1 17,2 17,5 17,3 16,7 16,1 15,1 13,3 11,4 12,1 9,5 6,1 10,3 6,2 9,6 4,644 15 16 16,2 16,2 16 15,5 14,6 12,8 11,3 11,7 9,4 6 9,8 6 9,3 4,446 13,9 14,8 15 15,2 15,3 14,9 14 12,4 11,2 11,3 9,2 5,9 9,4 5,9 3,5 8,9 4,248 12,7 13,6 13,8 14,2 14,6 14,4 13,4 12 11,1 10,8 9 5,9 9,1 5,8 3,4 8,5 4,250 11,6 12,4 12,6 13,2 13,7 13,8 12,8 11,6 10,8 10,4 8,8 5,9 8,7 5,7 3,3 8,2 4,152 10,5 11,2 11,5 12,2 12,8 13,1 12 11,2 10,4 10 8,5 5,9 8,4 5,6 3,2 7,9 454 9,3 10 10,3 11,2 11,9 12,1 11,2 10,8 10,1 9,6 8,1 5,9 8,1 5,5 3,2 7,6 3,956 8,1 8,8 9,2 10,2 10,9 11,2 10,3 10,2 9,7 8,9 7,8 5,9 7,7 5,5 3,1 7,3 3,958 7 7,7 8 9,1 10 10,2 9,5 9,4 9,3 8,2 7,4 5,8 7,4 5,3 3,1 7 3,860 5,8 6,6 6,8 8 9 9,3 8,7 8,7 8,6 7,5 7,1 5,7 6,9 5,2 3,1 6,7 3,862 4,8 5,5 6,9 8 8,3 7,7 8 7,9 6,8 6,6 5,7 6,5 5 3 6,5 3,764 3,9 4,5 5,8 7 7,3 6,8 7,2 7,2 6,2 5,9 5,6 6 4,8 3 6,2 3,666 3 3,4 4,7 5,9 6,3 5,8 6,5 6,5 5,5 5,3 5,1 5,5 4,7 3 6 3,668 2,1 2,5 3,8 4,9 5,3 4,9 5,7 5,8 4,7 4,7 4,4 5,1 4,3 3 5,8 3,570 1,8 3,1 4 3,9 4,9 5,1 4 4 3,8 4,6 3,7 3 5,5 3,472 2,3 3,1 3 4,1 4,4 3,3 3,5 3,2 3,9 3,2 2,8 5,3 3,474 2,3 2,5 3,3 3,8 2,5 3 2,6 3,2 2,7 2,2 4,8 3,176 2 2,6 1,8 2,4 2 2,5 2,1 1,6 4,2 2,778 2,1 1,9 1,9 1,7 3,7 2,480 1,6 3 2,182 2,3 1,884 1,5 1,5*
Ada
pter
**
Opt
ion
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne50
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
LIEBHERR LTM1500FLY JIB DUTIES
* A
dapt
er
Lifting capacities for lattice extension (hydraulic offset and luffing) — 165 t counterweight 16,1m + 4m* 26,5m + 4m*
(m) 21 28 35 42 49 56 63 70 77 84 91 21 28 35 42 49 56 63 70 77 84 9116 5918 53 20 48,5 47,5 5922 47,5 43,5 43 55 24 47,5 41 39,5 51 49 26 47 38,5 36,5 35,5 50 45,5 44 28 38 34,5 33,5 32 50 43 41,5 30 38 32,5 31 29,8 41,5 38,5 37 32 38 32 29,6 28 26,5 41,5 36,5 35 33 34 38 32 28,3 26,3 25 41,5 35 33,5 31,5 36 32 27,2 25,1 23,5 22,2 39 35 32 29,8 27,5 38 32 26,9 24 22,1 21 19,6 35 30,5 28,5 26,3 23,8 40 32 26,9 22,6 21,1 19,9 18,6 34 29,8 27,3 25,2 22,9 42 26,9 22,6 20,3 18,7 17,6 16,5 32 29,8 26,2 24,1 22,1 19,844 26,9 22,6 19,5 18 16,7 15,7 14,3 29,7 25,4 23,3 21,2 19,146 26,9 22,6 18,8 17,3 15,8 14,9 13,7 28,2 25,4 22,5 20,5 18,4 16,7 48 23,4 22,6 18,5 16,6 15,1 14,2 13,1 11,5 26,7 25,4 21,7 19,8 17,7 16,2 13,850 22,6 18,5 15,9 14,5 13,5 12,5 11,1 25,4 24,6 21,1 19,2 17,1 15,7 13,452 22,6 18,5 15,6 14 13 12 10,6 23,4 21,1 18,6 16,7 15,2 13,1 11,354 22,6 18,5 15,6 13,5 12,5 11,4 10,2 22,3 21,1 18 16,2 14,7 12,7 11,156 18,5 15,6 13 12 10,9 9,8 21,3 20,8 18 15,8 14,3 12,4 10,858 18,5 15,6 12,8 11,5 10,5 9,4 19,8 18 15,4 14 12,1 10,660 18,5 15,6 12,8 11,1 10,2 9 18,9 18 15 13,6 11,8 10,462 16,9 15,6 12,8 10,8 9,8 8,7 18,1 17,5 15 13,3 11,5 10,164 15,6 12,8 10,8 9,5 8,4 17,3 16,7 15 13 11,2 9,966 15,6 12,8 10,8 9,1 8 16 15 12,9 11 9,868 14,7 12,8 10,8 8,7 7,6 15,3 14,8 12,9 10,8 9,670 12,8 10,8 8,7 7,3 14,7 14,2 12,9 10,5 9,472 12,8 10,8 8,7 7 13,6 12,8 10,3 9,274 12,8 10,8 8,7 7 13 12,3 10,2 976 10,6 10,8 8,7 7 12,5 11,7 10 8,978 10,8 8,7 7 12 11,2 9,9 8,880 10,8 8,7 7 10,7 9,7 8,782 9,4 8,7 7 10,3 9,6 8,684 8,7 7 9,8 9,2 8,486 8,7 7 8,8 8,188 8,5 7 8,4 7,690 6,7 7 8 7,292 7 7,7 6,994 7 6,596 5,5 6,298 5,9
Rad
ius
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne50
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
LIEBHERR LTM1500FLY JIB DUTIES
* A
dapt
er
Lifting capacities for lattice extension (hydraulic offset and luffing) — 165 t counterweight 36,9m + 4m* 47,3m + 4m*(m) 21 28 35 42 49 56 63 70 77 84 91 21 28 35 42 49 56 63 70 77 84 9124 44,526 41 40 28 38,5 37 27,430 37 35 34 25,6 24,332 35,5 32,5 32 24,2 22,8 34 31,5 30 29,1 23 21,4 20,6 36 29,9 28,5 27,4 26,2 20,2 19,4 18,3 38 28,7 26,9 25,9 24,8 19,3 18,3 17,2 40 26,1 24,6 23,5 22 18,6 17,3 16,3 15,1 42 25,4 23,4 22,3 21 19,4 18 16,4 15,4 14,2 44 24,7 22,6 21,2 20 18,5 15,8 14,6 13,4 12 46 24 21,9 20,2 19 17,7 16,1 15,2 13,8 12,7 11,4 10,1 48 21,3 19,2 18,1 16,9 15,4 14,1 14,6 13,2 12 10,7 9,5 50 20,7 18,7 17,3 16,1 14,8 13,6 12,9 11,4 10,1 8,9 7,752 20,1 18,3 16,5 15,4 14,2 13,1 11,8 12,6 10,8 9,6 8,4 7,1 6,354 17,9 16 14,7 13,6 12,6 11,4 12,3 10,4 9,1 7,8 6,6 5,9 56 17,5 15,5 14 12,9 12,1 11 9,4 11,9 10 8,5 7,3 6 5,5 4,758 17,1 15 13,3 12,3 11,6 10,7 9,1 9,6 8 6,7 5,3 5,1 4,4 3,560 16,7 14,6 12,8 11,7 11,1 10,3 8,8 9,2 7,7 6,1 5 4,6 4,1 3,262 14,2 12,5 11,1 10,5 10 8,5 8,9 7,5 5,6 4,6 4,2 3,7 2,964 13,8 12,3 10,6 10 9,5 8,2 7,2 5,4 4,3 3,9 3,4 2,666 13,4 12 10,2 9,4 9,1 7,9 7 5,2 4 3,6 3,1 2,368 11,7 9,9 8,9 8,5 7,5 6,8 5 3,7 3,3 2,9 2,170 11,4 9,6 8,5 8 7 6,6 4,8 3,6 3,1 2,6 1,872 11,2 9,3 8,3 7,5 6,5 4,6 3,5 2,8 2,4 1,674 11 9,1 8 7,1 6 4,4 3,4 2,7 2,2 1,476 8,8 7,8 6,9 5,6 4,2 3,3 2,5 1,9 1,178 8,5 7,7 6,6 5,2 3,2 2,4 1,7 80 8,3 7,5 6,4 4,8 3,1 2,3 1,6 82 7,3 6,2 4,7 3 2,2 1,6 84 7,1 6 4,6 2,9 2,1 1,5 86 7 5,8 4,5 2 1,4 88 6,8 5,6 4,4 1,9 1,4 90 5,4 4,3 1,8 1,3 92 5,2 4,2 1,2 94 5 4,1 1,296 4 1,1 98 3,9 1 100 3,9
Rad
ius
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne50
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
LIEBHERR LTM1500FLY JIB DUTIES
* A
dapt
er
Lifting capacities for lattice extension (hydraulic offset and luffing) — 56m — 165 t counterweight
Radius 57,7m + 4m* 68,1m + 4m* 78,6m + 4m*
(m) 21 28 35 42 49 56 63 70 21 28 35 42 49 21 2830 17
32 15,9
34 14,9 13,4 8,5
36 14 12,5 7,8
38 11,7 10,8 7,2 5,3 2,9
40 11 10,1 9 6,6 4,9 4,2 2,7
42 10,4 9,4 8,4 4,6 3,9 2,5 1,3
44 9,8 8,8 7,7 6,5 4,3 3,6 2,8 1,1
46 8,3 7,2 5,9 4,5 4 3,4 2,6 1
48 7,8 6,6 5,3 4,2 3,1 2,4 1,5
50 7,4 6,1 4,9 3,9 3 2,9 2,1 1,3
52 5,9 4,6 3,6 2,7 2,8 2 1,1
54 5,6 4,4 3,4 2,5 1,6 2,6 1,8 1
56 5,3 4,1 3,1 2,2 1,4 1,7
58 5,1 4 2,9 2 1,2 1,5
60 3,8 2,7 1,8 1 1,4
62 3,6 2,5 1,6
64 3,5 2,4 1,4
66 2,3 1,2
68 2,1 1,1
70 2 1
72 1,9
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne50
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
LIEBHERR LTM1500FLY JIB DUTIES
* A
dapt
er
Lifting capacities for lattice extension (hydraulic offset and luffing) — 165 t counterweight 16,1m + 4m* 26,5m + 4m*(m) 21 28 35 42 49 56 63 70 77 84 91 21 28 35 42 49 56 63 70 77 84 9122 4524 41,526 39,5 38 4928 39,5 35,5 4630 33,5 32,5 43 41,532 32 30 41,5 38,5 34 32 28,8 27,4 36,5 35,5 36 32 27,6 26 35 33,5 38 26,8 24,8 23,5 33,5 31,5 30,5 40 26,8 23,6 22,2 31,5 30 28,9 42 26,8 23,4 21,2 19,8 29 27,9 26,2 44 23,4 20,4 18,7 27,4 26,8 24,9 46 23,4 19,6 17,9 16,7 26 25,4 23,7 22,3 48 23,4 19,1 17,2 15,8 24,1 23,1 21,3 50 23,4 19,1 16,6 15 14,1 22,9 22 20,3 18,9 52 19,1 16 14,5 13,3 21,7 20,9 19,8 18,2 54 19,1 15,8 14 12,6 12,2 20,7 19,9 19,3 17,5 16 56 19,1 15,8 13,5 12 11,6 19 18,4 17 15,4 58 15,8 13 11,6 11 10,4 18,1 17,5 16,5 14,9 13,860 15,8 12,8 11,2 10,4 9,9 17,3 16,7 16 14,4 13,4 62 15,8 12,8 10,8 10,1 9,3 8,4 15,9 15,3 14 12,9 11,8 64 15,8 12,8 10,4 9,7 8,8 7,9 15,2 14,5 13,6 12,5 11,5 66 12,8 10,2 9,2 8,4 7,4 14,5 13,9 13,2 12 11,1 9,668 12,8 10,2 8,8 8,1 7 13,9 13,2 12,7 11,6 10,8 9,470 12,8 10,2 8,6 7,8 6,7 12,7 12,2 11,1 10,4 9,172 10,2 8,6 7,5 6,4 12,1 11,6 10,8 10 8,874 10,2 8,6 7,1 6,1 11,6 11,1 10,3 9,6 8,576 10,2 8,6 6,8 5,8 10,6 9,8 9,1 8,278 10,2 8,6 6,7 5,6 10,1 9,3 8,6 7,880 8,6 6,7 5,3 9,6 8,8 8,1 7,482 8,6 6,7 5 9,2 8,4 7,7 6,984 8,6 6,7 4,8 8 7,3 6,486 6,7 4,6 7,6 6,8 688 6,7 4,6 7,2 6,5 5,690 6,7 4,6 6,1 5,292 6,7 4,6 5,7 594 4,6 5,4 4,796 4,6 5,1 4,598 4,6 4,3100 4,1
Rad
ius
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne50
0 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
LIEBHERR LTM1500FLY JIB DUTIES
* A
dapt
er
Lifting capacities for lattice extension (hydraulic offset and luffing) — 165 t counterweight 36,9m + 4m* 47,3m + 4m* 47,3m + 4m*
(m) 21 28 35 42 49 56 63 70 77 84 91 21 28 35 42 49 56 63 70 21 28 35 42 21
32 30,5 34 28,7 36 27,1 26 17,138 24,4 15,940 23 22,6 14,8 13,742 22 21,3 12,8 8,144 21,1 20,1 19,4 11,9 11,4 7,446 19,1 18,3 11,1 10,6 5,1 2,348 18,4 17,4 16,5 10,5 9,9 9 4,7 250 17,7 16,5 15,6 9,2 8,3 4,4 3,852 15,7 14,8 13,7 8,7 7,7 6,6 4,1 3,554 15,2 14,1 12,9 8,2 7,2 6,1 3,2 2,556 14,8 13,3 12,2 11,4 6,6 5,6 4,4 3 2,3 58 14,4 12,8 11,6 10,7 6,2 5,1 4 2,8 260 12,4 10,9 10,1 9,2 5,8 4,7 3,7 2,9 1,862 12,1 10,3 9,5 8,5 5,5 4,4 3,4 2,6 1,664 11,7 9,9 8,9 8 7,5 4,2 3,2 2,3 1,5 1,5 66 9,6 8,4 7,4 7 4 2,9 2,1 1,3 1,368 9,3 8 6,9 6,4 5,9 3,8 2,7 1,8 1,170 9 7,7 6,4 6 5,4 2,5 1,672 8,7 7,4 5,9 5,6 4,9 4,2 2,3 1,474 7,1 5,6 5,2 4,6 3,9 2,2 1,376 6,9 5,4 4,8 4,3 3,6 2 1,278 6,6 5,2 4,5 4 3,3 180 5,1 4,2 3,8 382 4,9 4,1 3,5 2,884 4,7 4 3,3 2,586 4,5 3,8 3,1 2,388 3,7 2,9 2,190 3,6 2,8 1,992 3,5 2,7 1,894 2,6 1,696 2,5 1,498 2,5 1,3100 2,4 1,2104 1,2
Rad
ius
47,3m + 4m*
KING LIFTING
KING LIFTING LIMITEDHEAD OFFICE: King Road Avenue Avonmouth Bristol BS11 9HFTel: 01179 821121 Fax: 01179 826244 Web: www.kinglifting.co.uk DEPOTS ACROSS THE UK
'BIG ENOUGH TO COPE, SMALL ENOUGH TO CARE'
TOWERCRANESKing Lifting has intergrated intoits fl eet the new folding tower cranes. This type of tower craneis able to tackle lifts in urban areas with confined sitesand the associated phased developments.
Available in both mobile and pedestrian operated/self erecting types. Our experience survey teams are available to offer consultation and advise on this type of lift.
Greater functionality than traditional tower and mobile cranes
18min erection time for Spierings mobile crane
Reduced need for road closures, site and neighbourhood disruptions
Potain IGO range of pedestrian operated tower cranes
Spierings range of mobile tower cranes
Tower crane erection services
Full 3D CAD planning / feasibility studies
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne9
Tonn
e
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
SPIERINGS SK 599-AT5DIMENSIONS
Vehicle weight 60,000kg
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Tow
er C
rane
9 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
SPIERINGS SK 599-AT5
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Tow
er C
rane
9 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
SPIERINGS SK 599-AT5
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Tow
er C
rane
9 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
SPIERINGS SK 599-AT5
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Tow
er C
rane
9 To
nne
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
SPIERINGS SK 599-AT5
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Tow
er C
rane
10 T
onn
e
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
SPIERINGS SK 1265-AT6DIMENSIONS
Vehicle weight 60,000kg
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Tow
er C
rane
10 T
onn
e
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
SPIERINGS SK 1265-AT6
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Tow
er C
rane
10 T
onn
e
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
SPIERINGS SK 1265-AT6
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Tow
er C
rane
10 T
onn
e
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
SPIERINGS SK 1265-AT6
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Tow
er C
rane
18 T
onn
e
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
SPIERINGS SK 2400-AT7DIMENSIONS
Vehicle weight 84,000kg
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Tow
er C
rane
18 T
onn
e
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
SPIERINGS SK 2400-AT7NORMAL WORKING DUTIES
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Tow
er C
rane
18 T
onn
e
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
SPIERINGS SK 2400-AT7
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Tow
er C
rane
18 T
onn
e
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
SPIERINGS SK 2400-AT7
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Tow
er C
rane
18 T
onn
e
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
SPIERINGS SK 2400-AT7
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Tow
er C
rane
18 T
onn
e
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
SPIERINGS SK 2400-AT7
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Tow
er C
rane
18 T
onn
e
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
SPIERINGS SK 2400-AT7INCREASED CAPACITY / REDUCED WORKING SPEED DUTIES
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Tow
er C
rane
18 T
onn
e
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
SPIERINGS SK 2400-AT7
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Tow
er C
rane
18 T
onn
e
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
SPIERINGS SK 2400-AT7
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Tow
er C
rane
18 T
onn
e
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
SPIERINGS SK 2400-AT7
KING LIFTING
KING LIFTING LImITedHead OFFIce: King Road Avenue Avonmouth Bristol BS11 9HFTel: 01179 821121 Fax: 01179 826244 Web: www.kinglifting.co.uk Depots aCRoss tHe UK
'big enoUgH to Cope, small enoUgH to CaRe'
sPecIaLIsed eQUIPmeNTKing Lifting can provide specialised solutions for yourinstallations and lifting problems.
KING LIFTING Versa Lifts
Can move large machine tools quickly without removing guards, cutting costly downtime.
KING LIFTING Power Lift Gantry systems
Enabling the movement of machinery with restricted headroom.
KING LIFTING
compact cranes A new technology at only 750mm wide able to enter a premises through a doorway then lift 2.82t, with a max radius of 8.2m and height 8.7m.
KING LIFTING mini crawler cranes
With full 360° rotation, pick and carry duties and almost no tail-swing these tracked cranes are ideal for urban, small scale and phased developments.
KING LIFTING Lifting equipment
King Lifting have a range lifting equipment for hire, including modular lifting beams upto 100t capacity, manbaskets, boat slings, outriggermats etc.
PReVIOUs PaGe NeXT PaGecONTeNTs PaGe
KING LIFTING
KING LIFTING LIMITEDHEAD OFFICE: King Road Avenue Avonmouth Bristol BS11 9HFTel: 01179 821121 Fax: 01179 826244 Web: www.kinglifting.co.uk DEPOTS ACROSS THE UK
'BIG ENOUGH TO COPE, SMALL ENOUGH TO CARE'
PLANT AND MACHINERY MOVEMENTKing Lifting are focused on delivering safe, practical and effi cient solutions to all of your plant and machinery moving requirements, allowing you to keep any down time and other inconveniences to an absolute minimum.
Our team consists of skilled labour whohave access to the latest specialised handling equipment including Versalifts, Compact Cranes, Powerlift Gantry Systems and our own fl eet of Mobile Cranes.
Single machine moves
Factory removals
Internal relocations
Mechanical and Electrical Installations
Contract Lifts
Lorry loader and specialist transport
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne3
Tonn
e
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
MAEDA COMPACT CRANEDIMENSIONS
Vehicle weight 1900kg
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Cra
ne3
Tonn
e
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
MAEDA COMPACT CRANEMAIN BOOM
Main Boom
Total rated load (kg)
4,075 5,575 7,075 8,575
<4,0 550
<3,6 820
<3,0 1220
<1,4 2820
1,5 2520
2,0 1920
2,5 1570
3,0 1220
3,5 970 970
3,705 920
4,0 780 740
4,5 630 580 400
5,0 530 480 340
5,205 530
5,5 430 300
6,0 380 270
6,5 350 230
6,705 330
7,0 200
7,5 180
8,0 150
8,205 150
Radius(m) (outriggers at maximum position)
Boom Boom Boom Boom
The working range chart applies to cases without loadand does not include boom deflections.
WORKING RANGE CHART
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Equ
ipm
ent
3000
KG
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
CATERPILLAR VC60EDIMENSIONS
Forklift at 500mm Gas Powered
Capacity 3000kg
Weight 4576kg
TECHNICAL SPECIFICATION
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Equ
ipm
ent
5000
KG
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
CATERPILLAR VC110FDIMENSIONS
Forklift at 500mm Gas Powered
Capacity 5000kg
Weight unladen 7,200kg
TECHNICAL SPECIFICATIONFORKLIFT CRANE ARM ATTACHMENT
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Equ
ipm
ent
5500
KG
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
MITSUBISHI FGC55KDIMENSIONS
Forklift at 600mm LP Gas Powered
Capacity 5500kg
Weight 7200kg
TECHNICAL SPECIFICATION
2840
1200
4125
2120
1220
4130
1200
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Equ
ipm
ent
6050
KG
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
CATERPILLAR T150DDIMENSIONS
Forklift at 600mm Gas Powered
Capacity 6050kg/600mm
Weight unladen 9,800kg
TECHNICAL SPECIFICATION
LOW BED TRAILER
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Equ
ipm
ent
7000
KG
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
HYSTER SPACESAVER S7.00XLDIMENSIONS
Forklift at 600mm
Capacity 7000kg
Weight unladen 9265kg
TECHNICAL SPECIFICATION
LOAD CENTREDistance from front of forks to centre of gravity of load.
RATED LOADBased on vertical masts as shown left.
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Equ
ipm
ent
1588
0 K
G
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
VERSA-LIFT 25/35DIMENSIONS
Forklift at 610mm extended ballast
TECHNICAL SPECIFICATION
Capacity Retracted 11,350kg/610mm Extended 15,880kg/610mmGradient Empty 38% Loaded 17%Tilt Forward 11° Backward 6°Weights Total 15,650kg Boom 1,360kgs Counterweight 2,720kg Forks 680kg
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Equ
ipm
ent
1588
0 K
G
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
VERSA-LIFT 25/3525/35 VERSA-LIFT WITH 3 COUNTERWEIGHTS
Slab Weight (kg) Number of Slabs Standard Wheel Base (mm) 880 3 1930
Lifting Capacities w/Boom Only (kgs)
0 300 600 900 300 10700 12400 14200 15900 600 8600 9900 11300 12700 900 7100 8300 9400 10600 1200 6100 7100 8100 9100 1500 5400 6200 7100 7900 1800 4800 5500 6300 7100 2100 4300 5000 5700 6400 2400 3900 4500 5200 5800
Counterweight Extensions (mm)
Load Center From Boom Face (mm)
Lifting Capacities w/Fork and Boom (kgs)
0 300 600 900 600 8100 9500 10900 12300 900 6800 7900 9100 10200 1200 5800 6800 7800 8800 1500 5100 5900 6800 7700 1800 4500 5300 6100 6800 2100 4100 4800 5400 6100 2400 3700 4300 5000 5600
Counterweight Extensions (mm)
Load Center From Boom Face (mm)
Lifting Capacities w/Forks Only (kgs)
0 300 600 900 600 11100 12800 14600 16300 900 8900 10300 11700 13000 1200 7400 8600 9700 10900 1500 6300 7300 8300 9300 1800 5600 6400 7300 8100 2100 4900 5700 6500 7200
Counterweight Extensions (mm)
Load Center From
Fork Face (mm)
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Equ
ipm
ent
2730
0 K
G
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
VERSA-LIFT 40/60DIMENSIONS
Forklift at 915mm extended ballast
TECHNICAL SPECIFICATION
Capacity Retracted 18t/915mm Extended 27t/915mmGradient Empty 47% Loaded 20%Tilt Forward 12° Backward 7°Weights Total 26,315kg Boom 2,722kgs Counterweight 7,260kg Forks 1361kg
Drawbar Pull Empty 6,216kgs Loaded 5,400kgsAxle Weights Steer Empty 14,065kg Drive Empty 12,250kg Steer Loaded 2,722kg Drive Loaded 50,817kg
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Equ
ipm
ent
2730
0 K
G
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
VERSA-LIFT 40/6040/60 VERSA-LIFT WITH 3 COUNTERWEIGHTS
Slab Weight (kg) Number of Slabs Wheel Base (mm) 1700 4 2490
Lifting Capacities w/Forks Only (kgs)
0 300 600 900 1200 900 18900 21000 23100 25200 27300 1200 15800 17500 19300 21100 22900 1500 13600 15100 16600 18100 19600 1800 11900 13200 14600 15900 17200 2100 10600 11800 13000 14100 15300
Counterweight Extensions (mm)
Load Center From
Fork Face (mm)
Lifting Capacities w/Forks and Boom Only (kgs)
*** All load Capacities are Rated with the Mast Vertical.*** Regions Marked by an * are Limited by Structural Limitations.
0 300 600 900 1200 600 17400 19500 21500 23600 25700 900 14600 16300 18000 19800 21500 1200 12600 14100 15600 17000 18500 1500 11000 12300 13600 15000 16300 1800 9800 11000 12200 13300 14500
Counterweight Extensions (mm)
Load Center From
Fork Face (mm)
Lifting Capacities w/Boom Only (kgs)
0 300 600 900 1200 600 18000 20000 22100 24200 26300 900 15100 16800 18600 20300 22000 1200 13000 14500 16000 17500 19000 1500 11400 12700 14100 15400 16700 1800 10200 11300 12500 13700 14900 2000 9700 10700 11900 13000 14100 2100 9200 10200 11300 12300 13400 2300 8800 9700 10700 11800 12800 2400 8300 9300 10300 11200 12200 2600 8000 8900 9800 10800 11700 2700 7700 8600 9400 10300 11200 2900 7400 8200 9100 9900 10800 3000 7100 7300* 7300* 7300* 7300*
Counterweight Extensions (mm)
Load Center From
Fork Face (mm)
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Equ
ipm
ent
100
Tonn
e
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
POWER LIFT SYSTEMDIMENSIONS
KING LIFTING
KING LIFTING LImITedHead OFFIce: King Road Avenue Avonmouth Bristol BS11 9HFTel: 01179 821121 Fax: 01179 826244 Web: www.kinglifting.co.uk Depots aCRoss tHe UK
'big enoUgH to Cope, small enoUgH to CaRe'
TRaNSPORTKing Lifting Limited is one of the country’s leading companies specialising in crane Hire, machinery Installation and Removal and Transport.
Our Low loader, Semi-low loader and flat bed vehicles, together with our fleet of lorry loader cranes are all operated by trained and fully competent personnel. We can lift, shift and transport your loads to any part of the UK or Europe, safety and securely.
KING LIFTING Abnormal loads
KING LIFTING
Lorry loaders to 16t capacity
KING LIFTING
Low loaders to 150t capacity
KING LIFTING
Tautliner transport
PReVIOUS PaGe NeXT PaGecONTeNTS PaGe
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
Gui
de
Tran
spor
t
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
THE QUICK GUIDE TO NOTIFICATION ATTENDANT & MARKER REQUIREMENTS
(Make clearly visable)
(End)
(End and side)
(End and both sides)
(End and side)
(End and side)
(End and both sides)
NOTIFY NOTIFY MEASUREMENTS POLICE HIGHWAYS ATTENDANT MARKERS
WIDTH OVER 2.9m (9’ 6”) YES NO NO YES OVER 305mm (1’ 00”) either YES NO NO YES side of Vehicle (See Note 2)
OVER 3.5m (11’ 6”) YES NO YES YES OVER 5m (16’ 5”) YES NO YES YES VR1 required from DOT OVER 6.1m (20’ 0”) YES NO YES YES Special Order required from DOT
LENGTH OVER 18.65M (61’ 2”) Rigid YES NO YES NO STGO 18.3m Rigid (See Note 4)
OVER 27.4m (89’ 101/4”) Rigid YES NO YES NO Special Order required from DOT
COMBINATION OVER 25.9m YES NO YES NO (84’ 111/4”) Tractor and Trailer(s)
PROJECTIONS - REAR
OVER 1m (3’ 3”) NO NO NO NO OVER 2m (6’ 6”) NO NO NO YES OVER 3.05m (10’ 0”) YES NO YES YES OVER 5m (16’ 5”) Markers not YES NO YES YES more than 3.5m (11’ 6”) apart
PROJECTIONS - FRONT
OVER 2m (6’ 6”) NO NO YES YES OVER 3.05m (10’ 0”) YES NO YES YES OVER 4.5m (14’ 9”) YES NO YES YES
WIDTH MAXIMUM SPEED OVER C & U 10,170kgs (Axle) NO YES NO N/A OVER 41,000kgs NO YES NO N/A (See Note 6)
OVER 41,000kgs NO YES NO N/A but not over 46,000kgs (CAT 1)
OVER 46,000kgs NO YES NO (1) 40MPH but not over 80,000kgs (CAT 2) (2) 35MPH maximum axle weight 12,500kgs (See Note 5)
OVER 80,000kgs YES YES NO (1) 30MPH but not over 150,000kgs (CAT 3) (2) 25MPH (3) 20MPH (4) 12MPH
OVER 150,000kgs at CAT 3 YES YES NO VARIOUS but Special Order required from DOT
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
150
Tonn
eTr
ansp
ort
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
MAN TGX 26.540 6X4 BBSDIMENSIONS
TECHNICAL SPECIFICATION
Vehicle weight 10.200kg
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
150
Tonn
eTr
ansp
ort
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
MAN TGX 26.540 6X4 BBSDIMENSIONS
TECHNICAL SPECIFICATION
Vehicle weight 10.200kg
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
150
Tonn
eTr
ansp
ort
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
MAN TGX 33.480 6X4 BBSDIMENSIONS
TECHNICAL SPECIFICATION
Vehicle weight 10.200kg
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
90 T
onn
eTr
ansp
ort
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
MAN TGX 26.480 6X4 BLSDIMENSIONS
TECHNICAL SPECIFICATION
Vehicle weight 10.200kg
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
10.2
To
nne
Tran
spor
t
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
SCANIA RIGID 8X4 + FASSI CRANE S660ADIMENSIONS
TECHNICAL SPECIFICATION
Max. lifting capacity 16000kg @ 3.4m 3100kg @ 16.1m
Max. hydraulic outreach 16.1m
Slewing angle 400 ° continous
Stabilizer spread 8880mm
Max payload 10,220kg 17,800kg
Vehicle weight 21,780kg 26,200kg
Solo with Drag Trailer
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
10.2
To
nne
Tran
spor
t
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
SCANIA RIGID 8X4 + FASSI CRANE S660ALORRY LOADER DUTIES (INCLUDING WINCH)
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
10.2
To
nne
Tran
spor
t
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
SCANIA RIGID 8X4 + FASSI CRANE S660ALORRY LOADER DUTIES (INCLUDING WINCH)
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
10.2
To
nne
Tran
spor
t
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
SCANIA RIGID 8X4 + FASSI CRANE S660ALORRY LOADER DUTIES (HOOK)
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
14.0
To
nne
Tran
spor
t
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
SCANIA RIGID 8X4 + PALFINGER CRANE 35000BDIMENSIONS
TECHNICAL SPECIFICATION
Max. lifting capacity 25358lbs 112.8 kN/11500kg at 9’2” 2.80m
Max. hydraulic outreach 62’8” 19.1m
Slewing angle 400 ° continous
Stabilizer spread 19’8” 6.0m
Max payload 14,000kg 21,830kg
Vehicle weight 17,750kg 22,170kg
Solo with Drag Trailer
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
14.0
To
nne
Tran
spor
t
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
SCANIA RIGID 8X4 + PALFINGER CRANE 35000BLORRY LOADER DUTIES (HOOK)
MAX. LIFTING CAPACITIES
Outreach Capacity Hydraulic
4.3m 7600kg 14’ 1” 16758lbs
6.1m 5310kg 20’ 11708lbs
8.1m 3960kg 26’ 7” 8732lbs
10.2m 3960kg 33’ 6” 6923lbs
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
14.0
To
nne
Tran
spor
t
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
SCANIA RIGID 8X4 + PALFINGER CRANE 35000BLORRY LOADER DUTIES (HOOK)
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
11 T
onn
eTr
ansp
ort
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
DAF FTG85CF 380 RIGID 6X4 + ATLAS CRANEDIMENSIONS
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
3.0
Tonn
eTr
ansp
ort
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
MERCEDES ATTEGO 815 RIGID FLATBED WITH SIDE BOARDSDIMENSIONS
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
KIN
G 0
1Tr
ansp
ort
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
ARB SEMI-LOW-LOADER TRI-AXLEDIMENSIONS
Extendable Tri-axle Semi Low-Loader
Payload Subject to Unit
Overall length 13600 - 18080mm
Overall width 2550mm
King pin 1250mm
TECHNICAL SPECIFICATION
Trailer weight 13,700kg
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
KIN
G 0
2Tr
ansp
ort
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
KING 6 AXLE BALLAST TRAILERDIMENSIONS
Flat Platform Ballast Trailers 6 Axles
Payload Subject to Unit
Overall length 17000mm
Overall width 2550mm
King pin 1900mm
TECHNICAL SPECIFICATION
Vehicle weight 17800kg
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
KIN
G 0
4Tr
ansp
ort
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
KING 6 AXLE BALLAST TRAILERDIMENSIONS
Flat Platform Ballast Trailers 6 Axles
Payload Subject to Unit
Overall length 17000mm
Overall width 2550mm
King pin 1900mm
TECHNICAL SPECIFICATION
Vehicle weight 17800kg
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
KIN
G 0
5Tr
ansp
ort
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
SDC 13.7M - 21.3M TRI-AXLE FLATBED EXTENDABLEDIMENSIONS
Flat Bed Trailer Extendable
Payload Subject to Unit
Overall length 13,700 - 21,300mm
Overall width 2.560mm
King pin 1,500mm
TECHNICAL SPECIFICATION
Trailer weight 7920kg
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
KIN
G 0
6Tr
ansp
ort
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
OVERLANDER TPT36E EUROLINER 13.5M TRI-AXLEDIMENSIONS
Payload Subject to Unit
Overall length 1350mm
Overall width 2510mm
King pin 1670mm
TECHNICAL SPECIFICATION
Trailer weight 7800kg
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
KIN
G 0
8Tr
ansp
ort
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
MCCAULEY C279917 TRI-AXLE DRAG TRAILERDIMENSIONS
Max payload (design) 25,000kg
Vehicle weight 4420kg
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
KIN
G 0
9Tr
ansp
ort
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
MCCAULEY C281241 TRI-AXLE DRAG TRAILERDIMENSIONS
Max payload (design) 25,000kg
Vehicle weight 4420kg
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
KIN
G 1
0Tr
ansp
ort
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
KING 5 AXLE BALLAST TRAILERDIMENSIONS
PLATING DATAGross Trailer Weight Design 93,000 kgsGross Combination Weight Under UK Ballast Regs 93,000 kgsMax Axle Load Design (at 20kph/12mph) 15,000 kgsMax Axle Load (AIR) Design (at 40kph/25mph) 13,200 kgsMax Axle Load (AIR) Design (at 65kph/40mph) 12,590 kgsMax Kingpin Imposed Design 25,000 kgsOverall Length 15,500 kgsOverall Width 2,550 kgsKingpin Location 1,600 kgsCoupling Height to suit Unladen 1,370 kgsDeck Height over Bogie Ctr Unladen (+/- 100mm) 1,600mm
CHASSISTwin I beam main rails converging to single centre spine mainframe. 235mm deep ISO neck profile. 12mm thick pick-up plate with an angled leading edge, re-enforcing channels. Cross members at approx 600mm pitch. 200mm x 75mm x 23mm PFC channel side raves and steel section bolted side guards anti-under run bumper.
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
KIN
G 1
1Tr
ansp
ort
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
NOOTEBOOM 5 AXLE PLANT TRAILERDIMENSIONS
MCO-85-05V
(DESIGN) WEIGHTS Exc. options, at a max. speed of:(in tonnes) GBmax DE EC
80 km/h 60 km/h 50 km/h 40 km/h 30 km/h 20 km/h Cat 3 (§70) (40 t)Max. fi fth wheel 25,0 26,0 27,0 28,3 31,3 32,3 32,3 25,0 25,0Max. axlebogie 56,0 56,7 57,7 62,7 68,1 77,4 77,4 50,0Max. gross (GVW) 81,0 82,7 84,7 91,0 99,4 109,7 109,7 75,0 ~ 33Dead-weight, app. 15,5 15,5 15,5 15,5 15,5 15,5 15,5 15,5 15,5Net payload, app. 65,5 67,2 69,2 75,5 83,9 94,2 94,2 59,5 17,5
CHASSISChassis out of a telescopic central box-section mainmember and hotrolled sideraves (UNP-200 in lowbed), interconnected by strong pressed crossmembers. Extension spine precambered to reduce the sag in empty extended position. The chassis is extremely torsion-rigid and therefore very stable for high centre of gravity loads.
GOOSENECKSuitable for 4x2, 6x2, 6x4 and short 8x4 tractors. The rear of the neck has a beavertail.
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
KIN
G 1
2Tr
ansp
ort
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
BROSHUIS 5 AXLE BALLAST TRAILERDIMENSIONS
KING LIFTING
KING LIFTING LIMITEDHEAD OFFICE: King Road Avenue Avonmouth Bristol BS11 9HFTel: 01179 821121 Fax: 01179 826244 Web: www.kinglifting.co.uk DEPOTS ACROSS THE UK
'BIG ENOUGH TO COPE, SMALL ENOUGH TO CARE'
TRAININGThe importance of competent trained staff is critical to the safety of any lifting operation. King Lift ing is a CPCS Construction Plant Competence Scheme registered Test Centre.
We provide Training, Testing, Plant Renewals at our school in Avonmouth. We use experienced instructors from the industry to provide quality training.
Courses available:
Appointed persons (lifting operations)
Crane supervisor (lifting operations)
Slinger signaller
Mobile crane
Compact crane
Lorry loader
MEWPs (scissor and boom)
Industrial forkllift
To enrol or for more informationcall: 01179821121 or email: training@kinglifting.co.uk
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
KING LIFTING
KING LIFTING LIMITEDHEAD OFFICE: King Road Avenue Avonmouth Bristol BS11 9HFTel: 01179 821121 Fax: 01179 826244 Web: www.kinglifting.co.uk DEPOTS ACROSS THE UK
'BIG ENOUGH TO COPE, SMALL ENOUGH TO CARE'
COMPUTER AIDED DESIGNTo further our range of services to our customers we have added the CAD department.
This can offer a service from Basic Site Lift Plans to assist with the requirements of the Health & Safety Executive and BS:7121 to full 3D Feasibility Modelling of your lifting projects.
Basic Lift Plans
Assistance with HSE and BS:7121 Compliance
Full 2D and 3D Modelling Feasibility and Real-time Visualisations
AutoCAD® Computer Aided Design Software
CraniMAX CRANIMATION® Crane Manager software
Out-Rigger Loadings and Ground pressures accurately calculated
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
NOTES
KING LIFTING
www.kinglifting.co.uk
The charts that have been included have been reproduced from manufacturer specifications, and while every effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection.
PREVIOUS PAGE NEXT PAGECONTENTS PAGE
KING LIFTINGHEAD OFFICE: King Road Avenue, Avonmouth, Bristol BS11 9HFTel: 01179 821121 Fax: 01179 826244 Web: www.kinglifting.co.uk
top related