spiral wrapper helix 6036 - spirka schnellflechter gmbh · 2020. 8. 20. · spiral wrapper helix...

Post on 19-Jan-2021

12 Views

Category:

Documents

0 Downloads

Preview:

Click to see full reader

TRANSCRIPT

Spiral wrapperHELIX 6036

www.spirka-schnellflechter.com

Wilhelminenhofstr. 76-77D-12459 Berlin / GermanyTel: +49 30 54 99 18 0Fax: +49 30 54 99 18 45eMail: info@spirka-schnellflechter.com

The HELIX 6036 is the ideal choice when both highperformance and high quality are required. It’s flexibledesign, with greater operator access results in fasterbobbin changeovers and allows easier machinemaintenance.The HELIX 6036 is used for the spiral wrapping of cables and hoses with copper / soft steel wire and textile yarn.Typical applications are microphone cables and lowpressure hoses for air water and fuel.Options: single or double head, taping head, double disc capstan, different kinds of pay-off and take-up, length-ways yarn support, glue box, etc.

CompleteBraiding & WindingSolutions

Model Helix 6036

Number of Bobbins per Head 18

Bobbin Rotation Speed 25 - 400 rpm

depending on material

Jog Speed 25 rpm

Bobbin Dimensions Ø 125 x 95 / 80 mm

Bobbin Capacity max. 720 cm3

Pitch 5 - 100 mm

Smooth Starting Time 10 to 20 s

Braking Time 3 up to 5 s

Strand Diameter 2 - 25 mm

Diameter Capstan Disk 630 mm

Wire Type Copper, Textile and Soft Steel Wire

Wire Bunches Ø 0,10 to 0,30 mm

2 to 8 ends

Motor Output 5,0 kW

Floor Space 2 Heads + Capstan 4400 mm x 1100 mm

Floor Space Switch Cabinet 800 mm x 400 mm

Machine Weight 1400 kgNoise Level 75 dB(A)

Braiders Winders Payoffs Parts Support

Application• Spiral wrapping of cables with copper or soft steel wire• textiles and plastic strentgh members in tubes and hosesBasic Configuration• 2 spiraling heads• 1 double disk capstan• 1 switch cabinetTechnical Features• Individual carrier tension control• Quick clamping device with snap locking for the bobbins• Wire break detection (single or multi- end), with automatic shut down

• Inverter motor drive for controlled acceleration and deceleration• Digital readout of all important para- meters, shown at the operator panel• Control panel at each individual unit• During the operation of the machine the bonnets are forcibly closedOptions• Single head machine• Separate pay-off and take-up units• Separate two bobbin head (Spinner) for the application of binding wires• central taping unit

Our Group of Companies goes from Strength to Strength

www.wardwell.comwww.henrich.netwww.stolberger.comwww.queins.comwww.sketvmb.de

top related