stainless-steel bi-metal self-drilling fasteners 0513/ejot_usa_jt3_jf3... · self-drilling screws...
Post on 14-Oct-2020
3 Views
Preview:
TRANSCRIPT
Stainless-Steel Bi-Metal Self-Drilling Fasteners for the construction industry
2
EJOT SAPHIR® Self-Drilling Fasteners JT3
General building authorities approvals (abZ)
General building authorities approvals
General building authority approvals are granted for construction products and types of construction for which there are no generally acknowledged rules of technology, DIN standards in particular, or which deviate considerably from them.
General building authorities approvals are granted by the Deutsche Institut für Bautechnik (DIBt) for all federal states. They are an assessment of the usability or applicability of the approval subject with regards to the building authorities requirements.
General building authorities test certificates (abP)
General building authorities test certificate A general building authorities test certificate is proof of usability granted for:
• construction products which do not necessitate the compliance with significant requirements to the safety of structural components or
• for components that can be evaluated according to generally approved test methods (§ 19 Abs. 1 Musterbauordnung).
The building code A part 1, part 2 and part 3 lists for which product a general building authorities mtest certificate can be granted.
Only inspection authorities approved by the DIBt or another building authority are able to grant general building authorities test certificates.
European Technical Approvals / Assessments (ETA)
Z-14.1-4 Fasteners for structures with “cold profiles” made of sheet steel - in particular profiled steel panels
Z-14.1-421 Wall cassette system Isover Metac WS
Z-14.4-426
Self-drilling screws for fixing aluminium clips for building authorities approved standing seam sheets, linear timber components with a min. thickness of 40 mm and other metal parts to substructures made of steel, aluminium or wood-based materials.
Z-14.4-532 Solar Fastening System for fixing solar installations
Z-14.4-779 Thread-forming screws for fastening sandwich panels to steel or timber substructures
Z-21.8-1265 KERI rain screen anchor – rain screen protection anchor for three-layer external wall panels
Z-21.2-1652 EJOT VSD – cavity wall repair anchor for subsequent installation of outer sheet
Z-31.4-174 Fibre cement corrugated profile 177/51 P5 and P6 with polypropylene strip insert (Eternit)
Z-50.4-337 Panel material Max Exterior F - Hexa for steps, platforms and balcony boards (FunderMax)
Z-30.3-6 Products, fasteners and components made of corrosion-resistant steels
Z-14.1-537 Mechanical fasteners for fixing aluminium components to each other, or with aluminium, steel or timber substructures
ETA-13/0177 Fasteners for sandwich panels
ETA-07/0013 Fastening elements for roofing membrane systems
ETA-16/0089 Chemical anchors for installation into masonry
ETA-16/0107 Chemical anchors for installation into concrete
ETA-08/0040 Mechanical fasteners made of steel (tie pin) in combination with installation tools
ETA-14/0219 Anchor bolts for installation into cracked and non-cracked concrete (BA-V; BA-F; BA-E; BA-E HCR)
ETA-10/0200 Fasteners for metal components and sheet metal
ETA-10/0305 SDF-10V and SDF-10H plastic anchors for multiple use in concrete and masonry for non-structural applications
ETA-12/0502 SDP-10G plastic anchor for multiple fixing of non-load-bearing systems into aerated concrete
ETA-15/0027 Plastic anchors SDF-14A for multiple fixing of non-load-bearing systems into concrete, masonry and aerated concrete
ETA-15/0387 Plastic anchors SDF-8V for multiple fixing of non-load-bearing systems into concrete and masonry
ETA-06/0259 Deformation-controlled expansion anchor for multiple fixing of non-load-bearing systems into concrete (ceiling nail)
ETA-13/0441 Deformation-controlled expansion anchor for multiple fixing of non-load-bearing systems into concrete (LAL+l)
ETA-13/0442 Deformation-controlled expansion anchor for fastening in non-cracked concrete (LAL+)
ETA-15/0514 Screw anchor
ETA-16/0123 Screw anchor
P-BWU02-148007Self-drilling screws for fixing aluminium wall brackets to substructures made of aluminium support profile for rear-ventilated facade cladding (JT4-4-4.8xL)
P-BWU02-148008 Fixing aluminium structures to rear-ventilated facade cladding (JZ3-6.3xL; JB3-6.3xL; JA3-6.5xL; JT3-3-5.5xL)
P-BWU02-148004Self-drilling screws for fixing aluminium and stainless steel wall brackets to aluminium support profile substructures for rear-ventilated facade cladding ((JT4/JT9)-3H/5-5.5x19; (JT4/JT9)-3H/7-5.5x21)
P-BWU02-16812Self-drilling screws for fixing wooden slats to substructures made of aluminium support profile for regulated rear-ventilated facade cladding according to DIN 18516-1 (JT4-S-2-4.8xL)
P-BWU02-178002Self-drilling screws for fixing aluminium and stainless steel wall brackets to aluminium bearing profile substructures for rear-ventilated facade cladding (VARIO)
ICC-ES Evaluation ReportICC ESR-4009
ETA-10/0200
European Technical Approvals/ Assessments are proof for the performance of a construction product within the sense of the Construction Products Directive. In Germany, ETAs are transposed by the Bauproduktengesetz (Construction Products Law). The ETA is based on tests, examinations and a technical assessment by approval bodies designated by the EU Member States for this purpose. It covers all product characteristics which are important for the fulfillment of the legal requirements in the member states, with the relevant levels of performance required being different in each member state.
A European technical approval / assessment can be granted for construction products for which harmonised specifications according to the Construction Products Directive do not (yet) exist or which deviate substantially from a harmonized standard.
Basis for the assessment of the performance are either Guidelines for European Technical Approvals (ETAGs) prepared by EOTA for the relevant product area, or criteria forassessment procedures that are agreed on with other EOTA bodies for issue of an approval of a specific request.
In the interest of the manufacturer the verifications presented to DIBt will be used as far as possible for the European procedure.
The European technical approval / assessment enables the manufacturer to place the CE marking on the construction product and thus access to the European market. With the CE marking the manufacturer confirms that he has carried out the prescribed verification method and that the conformity of the product is given with the approval.
FM ApprovalIn addition to general building authorities and European Technical Approval, selected EJOT products also feature a product certification by the American mutual insurance company FM Global.
The FM certification recognised both in Germany and internationally ensures compliance with the strictest quality and safety requirements.
3
Call: (248) 938 4067 Email: infoUS@ejot.com www.ejot-usa.com
PRODUCT GROUP EJOT Super-SAPHIR® fasteners are manufactured from 304 (A2) grade austenitic stainless steel with a hardened carbon steel drill point welded to the stainless steel shank.
DESIGN The hardened drill point enables the screw to drill carbon steel sections and by having the lead threads formed on this hardened point this allows for correct tapping at high drilling speed.
ASSEMBLY Where specified they are assembled with a stainless steel / EPDM vulcanized sealing washer every time.
FINISH These fasteners are zinc coated for aesthetic reasons and waxed to lubricate the surface during installation.
EJOT Super-SAPHIR®
Self-Drilling Fasteners JT3
EJOT product codes explained:
Super-SAPHIR® JT 3 - 2 - D x L - S5/8Product type
EJOT trade mark
Self drilling
Fastener material
Max. drilling capability
Free spin zone
Fastener øLength
Bonded washer type
Washer ø
4
EJOT SAPHIR® Self-Drilling Fasteners JT3
PRODUCT GROUP The new EJOFAST JF3 fastener utilizes advanced fastening technology for fixing thin metal to thin metal. Manufactured from 304 (A2) grade austenitic stainless steel with a unique carbon pierce-point tip welded to the stainless steel shank.
DESIGN EJOFAST’s 10 and 12 gauge diameter (4.8mm and 5.5mm) utilize a buttress thread design, delivering high pullout strengths.
ASSEMBLY Where specified they are assembled with a stainless steel / EPDM vulcanized sealing washer ensuring a safe seal every time.
FINISH These fasteners are zinc coated and waxed to lubricate the surface during installation.
INSTALLATION EJOFAST goes exactly where it should go – no skating on the surface. Installation also ‘feels’ equally smooth. Multiple time tests at a drive speed of 1650 rpm with an end loading of 44lbs clearly showed EJOFAST to be on average 30% faster than a standard stitcher. This means significant man-hours saved on any moderate to large installation.
CLEAN, TIGHT JOINT By displacing, as opposed to cutting the metal, this innovative thread creates no debris and swarf. Displaced metal is forced forward - creating a tighter joint. On site, the removal of swarf should be ‘good housekeeping’ practice. ‘Overlooked’ swarf soon turns to unsightly rust.
Tensometer testing shows that the EJOFAST JF3 offers an improved pullout resistance advantage of 30% over conventional stitchers.
EJOFASTSelf-Drilling Fasteners JF3
Effective Clamping Thickness (ECT) is the total thickness
of the build up to be fixed.
Embedment (EMB) figures relate to depth into substrate
(not including clamp pieces).
Key to fasteners:
without washer
with washer
5
Call: (248) 938 4067 Email: infoUS@ejot.com www.ejot-usa.com
Bi-Metal Stainless-Steel Self-Drilling Fasteners (JF3 - JT3 - JF6 - JT6)
Item Description SAP Code MFR Model No BoxQty
#10 x 3/4" HWH w/washer - DP1 3591977391 JF3-2H-4.8 x 19 E14 500
#12 x 1" - HWH no washer -DP1- 7380639301* JF3-2-5.5 x 25 1000
#12 x 1" - HWH w/washer -DP1- 3597211391* JF3-2-5.5 x 25 E16 500
#12 x 1-3/8" - HWH no washer -DP1- 7380644301 JF3-2- 5.5 x 35 500
#12 x 1-3/8'" - HWH w/washer -DP1- 3597511391 JF3-2- 5.5 x 35 E16 500
Sharp Point Sheet Metal Fasteners for #29 Gauge to #18 Gauge Steel
Application Laps of roofing or cladding sheets and flashings
Drill Point 1
18 Threads Per Inch
Item Description SAP Code MFR Model No BoxQty
#10 x 3/4" HWH -DP1- 7380496301 JT3-2H-4.8 x 19 1000
#10 x 3/4" HWH w/washer -DP1- 3591977351 JT3-2H-4.8 x 19 E14 1000
#12 x 1" HWH w/washer -DP1 3592211391 JT3-2H Plus -5.5 x 25 E16 500
#12 x 1-3/8" HWH no washer -DP1 7380614301 JT3-2H Plus -5.5 x 35 500
#12 x 1-3/8" HWH w/washer -DP1- 3592511391 JT3-2H Plus -5.5 x 35 E16 500
#13 x 1" - HWH no washer -DP1- 7380499301 JT3-2-6 x 25 500
#13 x 1" - HWH w/washer -DP1- 3595511321 JT3-2-6 x 25 E16 500
#13 x 1-3/8" - HWH no washer -DP1- 7380633301 JT3-2-6 x 35 500
#13 x 1-3/8'" - HWH w/washer -DP1- 3595711321 JT3-2-6 x 35 E16 500
DP1 Sheet Metal Fasteners for #26 Gauge to #18 Gauge Steel
Application Laps of roofing or cladding sheets and flashings
Drill Point 1
14 Threads Per Inch
Item Description SAP Code MFR Model No BoxQty
#13 x 1-3/8" - C/SK -DP1- 7382160301 JT3-ST-2-6.0 x 35 500
#13 x 2-3/8" - C/SK -DP1- 7382125301 JT3-ST-2-6.0 x 60 250
#13 x 3-1/8" - C/SK -DP1 7382107301 JT3-ST-2-6.0 x 80 250
#13 x 4" - C/SK -DP1 7382101301 JT3-ST-2-6.0 x 100 250
#13 x 4-3/4" - C/SK -DP1- 7382102301 JT3-ST-2-6.0 x 120 250
#13 x 5-1/2" - C/SK -DP1- 7382103301 JT3-ST-2-6.0 x 140 250
#13 x 6-1/4" - C/SK -DP1- 7382104301 JT3-ST-2-6.0 x 160 100
#13 x 7" - C/SK -DP1- 7382105301 JT3-ST-2-6.0 x 180 100
#13 x 8" - C/SK -DP1- 7382106301 JT3-ST-2-6.0 x 200 100
#13 x 8-2/3" - C/SK -DP1- 7382197301 JT3-ST-2-6,0x220 100
DP1 Countersunk Fasteners for #29 Gauge to #18 Gauge Steel and to Ply/OSB/Timber
Application Standing seam halter brackets
- Steel sections from .028 - .063” in thickness Drill and tap capacity .028 - .063”
Drill and tap capacity .55 - 1.5mm
Drill Point 1
12.7 Threads Per Inch
*Also available in Marine Grade 316 (A4) stainless steel.
6
EJOT SAPHIR® Self-Drilling Fasteners JT3
DP1 Anti Back-Out Fasteners
ApplicationStanding seam halter brackets
Drill and tap capacity .028 - .063”
Drill and tap capacity 0.5 - 1.5mm
Drill Point 1
12.7 Threads Per Inch
Item Description SAP Code MFR Model No BoxQty
#13 x 1" - HWH anti backout -DP1- 7380539301 JT3-X2-6.0 x 25 500
#13 x 1-3/8" - HWH anti backout -DP1 7380516301 JT3-X2-6.0 x 36 500
#13 x 1-7/8" - HWH anti backout -DP1- 7380517301 JT3-X2-6.0 x 46 500
DP1 Sheet Steel to Timber Fasteners
���������������������������������
Application Roofing or cladding steel or aluminum sheets
- Timber
Mechanical performance is dependant on embedment and grade of timber
Drill Point 1
14 Threads Per Inch
Item Description SAP Code MFR Model No BoxQty
#10 x 1-3/8" HWH no washer -DP1- 7380375301 JT3-2-4.9 x 35 500
#10 x 1-3/8" HWH w/washer -DP1- 3593511321 JT3-2-4.9 x 35 E16 500
#10 x 2-3/4" HWH no washer -DP1- 7380376301 JT3-2-4.9 x 70 250
#10 x 2-3/4" HWH w/washer -DP1- 3597011321 JT3-2-4.9 x 70 E16 250
7
Call: (248) 938 4067 Email: infoUS@ejot.com www.ejot-usa.com
16 Gauge Sharp Point Sheet Steel to Timber Fix
ApplicationFastening profiled steel and aluminium sheet, sandwich panels and roofing sheet to timber substructure
Item Description SAP Code MFR Model No BoxQty
#16 x 1-1/2” HWH no washer -DP1- 7380670301 JF3-2-6.8 x 40 500
#16 x 1-1/2” HWH w/washer -DP1- 3594067391 JF3-2-6.8 x 40 E16 250
#16 x 2-3/8” - HWH no washer -DP1- 7380671301 JF3-2-6.8 x 60 250
#16 x 2-3/8”- HWH w/washer -DP1- 3594167391 JF3-2-6.8 x 60 E16 250
#16 x 3-1/8” - HWH no washer -DP1- 7380672301 JF3-2-6.8 x 80 200
#16 x 3-1/8”- HWH w/washer -DP1- 3594267391 JF3-2-6.8 x 80 E16 250
#16 x 4” - HWH no washer -DP1- 7380673301 JF3-2-6.8 x 100 100
#16 x 4” S5/8 - HWH w/washer -DP1- 3594367391 JF3-2-6.8 x 100 E16 100
#16 x 4-3/4” - HWH no washer -DP1- 7380674301 JF3-2-6.8 x 120 250
#16 x 4-3/4”- HWH w/washer -DP1- 3594467391 JF3-2-6.8 x 120 E16 100
#16 x 5-1/2” - HWH no washer -DP1- 7380684301 JF3-2-6.8 x 140 100
#16 x 5-1/2” - HWH w/washer -DP1- 3594567391 JF3-2-6.8 x 140 E16 100
#16 x 6-3/8” - HWH no washer -DP1- 7380685301 JF3-2-6.8 x 160 100
#16 x 6-3/8”- HWH w/washer -DP1- 3594667391 JF3-2-6.8 x 160 E16 100
#16 x 7” - HWH no washer -DP1- 7380677301 JF3-2-6.8 x 180 100
#16 x 7” S5/8 - HWH w/washer -DP1- 3594767391 JF3-2-6.8 x 180 E16 100
#16 x 7-7/8” - HWH no washer -DP1- 7380678301 JF3-2-6.8 x 200 100
#16 x 7-7/8” - HWH w/washer -DP1- 3594867391 JF3-2-6.8 x 200 E16 100
#16 x 8-5/8” - HWH no washer -DP1- 7380679301 JF3-2-6.8 x 220 100
#16 x 8-5/8” - HWH w/washer -DP1- 3594967391 JF3-2-6.8 x 220 E16 100
#16 x 9-1/2”- HWH no washer -DP1- 7380680301 JF3-2-6.8 x 240 100
#16 x 9-1/2”- HWH w/washer -DP1- 3595067391 JF3-2-6.8 x 240 E16 100
#16 x 10-1/4”- HWH no washer -DP1- 7380681301 JF3-2-6.8 x 260 100
#16 x 10-1/4”- HWH w/washer -DP1- 3595167391 JF3-2-6.8 x 260 E16 100
#16 x 11" HWH no washer -DP1- 7380682301 JF3-2-6.8 x 280 100
#16 x 11”- HWH w/washer -DP1- 3595267391 JF3-2-6.8 x 280 E16 100
#16 x 11-3/4”- HWH no washer -DP1- 7380683301 JF3-2-6.8 x 300 100
#16 x 11-3/4”- HWH w/washer -DP1- 3595367391 JF3-2-6.8 x 300 E16 100
8
EJOT SAPHIR® Self-Drilling Fasteners JT3
DP1 Sheet Steel to Timber Fix
Item Description SAP Code MFR Model No BoxQty
#1/4 x 1-1/2” HWH no washer -DP1- 7380658301 JT3-2-6.5 x 40 500
#1/4 x 1-1/2” HWH w/washer -DP1- 3594011321 JT3-2-6.5 x 40 E16 250
#1/4 x 2” - HWH no washer -DP1- 7380335301 JT3-2-6.5 x 50 250
#1/4 x 2”- HWH w/washer -DP1- 3598811321 JT3-2-6.5 x 50 E16 250
#1/4 x 2-5/8”- HWH no washer -DP1- 7380524301 JT3-2-6.5 x 65 250
#1/4 x 2-9/16"- HWH w/washer -DP1- 3598911321 JT3-2-6.5 x 65 E16 250
#1/4 x 3-1/8” - HWH no washer -DP1- 7380553301 JT3-2-6.5 x 80 200
#1/4 x 3-1/8”- HWH w/washer -DP1- 3598011321 JT3-2-6.5 x 80 E16 250
#1/4 x 4” - HWH no washer -DP1- 7380538301 JT3-2-6.5 x 100 200
#1/4 x 4” S5/8 - HWH w/washer -DP1- 3598111321 JT3-2-6.5 x 100 E16 100
#1/4 x 4-3/4” - HWH no washer -DP1- 7380472301 JT3-2-6.5 x 120 200
#1/4 x 4-3/4”- HWH w/washer -DP1- 3598311321 JT3-2-6.5 x 120 E16 100
#1/4 x 5-1/2” - HWH no washer -DP1- 7380473301 JT3-2-6.5 x 140 200
#1/4 x 5-1/2” - HWH w/washer -DP1- 3598511321 JT3-2-6.5 x 140 E16 100
#1/4 x 6-3/8” - HWH no washer -DP1- 7380474301 JT3-2-6.5 x 160 200
#1/4 x 6-3/8”- HWH w/washer -DP1- 3598711321 JT3-2-6.5 x 160 E16 100
#1/4 x 7” - HWH no washer -DP1- 7380541301 JT3-2-6.5 x 180 200
#1/4 x 7” S5/8 - HWH w/washer -DP1- 3598211321 JT3-2-6.5 x 180 E16 100
#1/4 x 7-7/8” - HWH no washer -DP1- 7380542301 JT3-2-6.5 x 200 100
#1/4 x 7-7/8” - HWH w/washer -DP1- 3599011321 JT3-2-6.5 x 200 E16 100
#1/4 x 8-5/8” - HWH no washer -DP1- 7380623301 JT3-2-6.5 x 220 150
#1/4 x 8-5/8” - HWH w/washer -DP1- 3599111321 JT3-2-6.5 x 220 E16 100
#1/4 x 9-1/2”- HWH no washer -DP1- 7380624301 JT3-2-6.5 x 240 100
#1/4 x 9-1/2”- HWH w/washer -DP1- 3599211321 JT3-2-6.5 x 240 E16 100
#1/4 x 10-1/4”- HWH no washer -DP1- 7380662301 JT3-2-6.5 x 260 100
#1/4 x 10-1/4”- HWH w/washer -DP1- 3599311321 JT3-2-6.5 x 260 E16 100
#1/4 x 11" HWH no washer -DP1- 7380663301 JT3-2-6.5 x 280 100
#1/4 x 11”- HWH w/washer -DP1- 3599511321 JT3-2-6.5 x 280 E16 100
#1/4 x 11-3/4”- HWH no washer -DP1- 7380664301 JT3-2-6.5 x 300 100
#1/4 x 11-3/4”- HWH w/washer -DP1- 3599611321 JT3-2-6.5 x 300 E16 100
���������������������������������
Application Roofing or cladding steel or aluminum sheets
- Timber
Mechanical performance is dependant on embedment and grade of timber
Drill Point 1
14 Threads Per Inch
9
Call: (248) 938 4067 Email: infoUS@ejot.com www.ejot-usa.com
Application Roofing or cladding steel or aluminum sheets
Drill and tap capacity .047 - .118”
Drill and tap capacity 1.2 - 3mm
Drill Point 2
14 Threads Per Inch
Application Roofing or cladding steel or aluminum sheets
Drill and tap capacity .047 - .118”
Drill and tap capacity 1.2 - 3mm
Drill Point 2
14 Threads Per Inch
DP2 #12 Gauge Fastener for Fastening from #18 Gauge to 1/8” Steel
Item Description SAP Code MFR Model No BoxQty
#12 x 1" - HWH no washer -DP2- 7380300301 JT3-3-5.5 x 25 500
#12 x 1" - HWH w/washer -DP2- 3592211331 JT3-3-5.5 x 25 E16 500
#12 x 1-3/8" - HWH no washer -DP2- 7380302301 JT3-3-5.5 x 35 500
#12 x 1-3/8"- HWH w/washer -DP2- 3592511331 JT3-3-5.5 x 35 E16 500
#12 x 2" - HWH no washer -DP2- 7380303301 JT3-3-5.5 x 50 250
#12 x 2" S5/8 - HWH w/washer -DP2- 3592811331 JT3-3-5.5 x 50 E16 250
#12 x 2-3/4" - HWH no washer -DP2- 7380379301 JT3-3-5.5 x 70 250
#12 x 2-3/4"- HWH w/washer -DP2- 3593911331 JT3-3-5.5 x 70 E16 250
DP2 #14 Gauge Fastener for Fastening from #18 Gauge to 1/8” Steel
Item Description SAP Code MFR Model No BoxQty
#14 x 1-1/2” - HWH no washer -DP2- 7380511301 JT3-3-6.3 x 38 500
#14 x 1-1/2”- HWH w/washer -DP2- 3599611331 JT3-3-6.3 x 38 E16 500
#14 x 2” - HWH no washer -DP2- 7380582301 JT3-3-6.3 x 50 250
#14 x 2” - HWH w/washer -DP2- 3599811331 JT3-3-6.3 x 50 E16 250
10
EJOT SAPHIR® Self-Drilling Fasteners JT3
DP3 #14 Gauge Fastener for Fastening from #16 Gauge to 1/4” Steel
Application Roofing or cladding steel or aluminum sheets
- Steel sections from .059 - .236” in thickness
- Use #14 x 1 when higher pullout, shear and tensile strength are required, see bottom of table
Drill and tap capacity .059 - .236”
Drill and tap capacity 1.5 - 6mm
Drill Point 3 14 Threads Per Inch
Application Roofing or cladding steel or aluminum sheets
- Steel sections from .059 - .236” in thickness
- Use #14 x 1 when higher pullout, shear and tensile strength are required, see bottom of table
Drill and tap capacity .059 - .236”
Drill and tap capacity 1.5 - 6mm
Drill Point 3 14 Threads Per Inch
DP3 #12 Gauge Fastener for Fastening from #16 Gauge to 1/4” Steel
Item Description SAP Code MFR Model No BoxQty
#12 x 1" - HWH no washer -DP3- 7380306301* JT3-6-5.5 x 25 500
#12 x 1"- HWH w/washer -DP3- 3572211361* JT3-6-5.5 x 25 E16 500
#12 x 1-1/4” - HWH no washer -DP3- 7380307301 JT3-6-5.5 x 30 500
#12 x 1-1/4"- HWH w/washer -DP3- 3572311361 JT3-6-5.5 x 30 E16 500
#12 x 1-3/8" - HWH no washer -DP3- 7380308301* JT3-6-5,5 x 35 500
#12 x 1-3/8"- HWH w/washer -DP3 3572511361* JT3-6-5,5 x 35 E16 500
#12 x 2” - HWH no washer -DP3- 7380309301 JT3-6-5.5 x 50 500
#12 x 2”- HWH w/washer -DP3- 3592811361 JT3-6-5.5 x 50 E16 250
#12 x 2-3/4” - HWH no washer -DP3- 7380383301 JT3-6-5.5 x 70 250
#12 x 2-3/4"- HWH w/washer -DP3- 3593911361 JT3-6-5.5 x 70 E16 250
#12 x 3-1/2” - HWH no washer -DP3- 7380384301 JT3-6-5.5 x 90 250
#12 x 3-1/2”- HWH w/washer -DP3- 3596111361 JT3-6-5.5 x 90 E16 250
#12 x 4-5/8” - HWH no washer -DP3- 7380385301 JT3-6-5.5 x 110 200
#12 x 4-3/8”- HWH w/washer -DP3- 3596211361 JT3-6-5.5 x 110 E16 100
#12 x 5-1/8” - HWH no washer -DP3- 7380386301 JT3-6-5.5 x 130 200
#12 x 5-1/8”- HWH w/washer -DP3- 3596311361 JT3-6-5.5 x 130 E16 100
#12 x 6” - HWH mp washer -DP3- 7380548301 JT3-6-5.5 x 150 200
#12 x 6” - HWH w/washer -DP3- 3596411361 JT3-6-5.5 x 150 E16 100
#12 x 6-3/4” - HWH no washer -DP3- 7380549301 JT3-6-5.5 x 170 100
#12 x 6-3/4”- HWH w/washer -DP3- 3596511361 JT3-6-5.5 x 170 E16 100
#12 x 7-1/2” - HWH no washer -DP3- 7380550301 JT3-6-5.5 x 190 200
#12 x 7-1/2”- HWH w/washer -DP3- 3596611361 JT3-6-5.5 x 190 E16 100
Item Description SAP Code MFR Model No BoxQty
#14 x 1 - HWH no washer -DP3- 7380510301 JT3-6-6.3 x 25 500
#14 x 1 - HWH w/washer -DP3- 3599411361 JT3-6-6.3 x 25 E16 500
*Also available in Marine Grade 316 (A4) stainless steel.
11
Call: (248) 938 4067 Email: infoUS@ejot.com www.ejot-usa.com
DP5 #12 Gauge Fastener for Fastening from #9 Gauge to 1/2” Steel
Application Roofing or cladding steel or aluminum sheets- Steel sections from 0.157 - .472” in thicknessDrill and tap capacity .157 - .472”Drill and tap capacity 4 - 12mmDrill Point 514 Threads Per Inch
Item Description SAP Code MFR Model No BoxQty
#12 x 1-1/2” HWH no washer -DP5 7380477309* JT3-12-5.5x40 500
#12 x 1-1/2” HWH w/washer -DP5- 3595611311* JT3-12-5.5x40-E16 500
#12 x 2-1/4" HWH no washer -DP5- 7380627309 JT3-12-5.5x58 500
#12 x 2-1/4” HWH w/washer -DP5- 3595811311 JT3-12-5.5x58-E16 250
#12 x 3” HWH no washer -DP5- 7380554309 JT3-12-5.5x78 250
#12 x 3” HWH w/washer -DP5- 3595011311 JT3-12-5.5x78-E16 250
#12 x 4” HWH no washer -DP5- 7380555309 JT3-12-5.5x98 250
#12 x 4” HWH w/washer -DP5- 3595111311 JT3-12-5.5x98-E16 100
#12 x 4-5/8” HWH no washer -DP5- 7380556309 JT3-12-5.5x118 200
#12 x 4-5/8” HWH w/washer -DP5- 3595211311 JT3-12-5.5x118-E16 100
#12 x 5-3/8” HWH no washer -DP5- 7380557309 JT3-12-5.5x138 200
#12 x 5-3/8” HWH w/washer -DP5- 3595311311 JT3-12-5.5x138-E16 100
#12 x 6-1/4"” HWH no washer -DP5- 7380558309 JT3-12-5.5x158 200
#12 x 6-1/4” HWH w/washer -DP5 3595411311 JT3-12-5.5x158-E16 100
#12 x 7” HWH no washer -DP5- 7380559309 JT3-12-5.5x178 200
#12 x 7” HWH w/washer -DP5- 3595511311 JT3-12-5.5x178-E16 100
#12 x 7-4/5” HWH no washer -DP5- 7380560309 JT3-12-5.5x198 200
#12 x 7-4/5” HWH w/washer -DP5 3595711311 JT3-12-5.5x198-E16 100
Item Description SAP Code MFR Model No BoxQty
#12 x 2-1/4" HWH no washer -DP7- 7380686309 JT3-18-5.5x55 500
#12 x 2-1/4” HWH w/washer -DP7- 3593011381 JT3-18-5.5x55-E16 500
#12 x 4-1/2" HWH no washer -DP7 7380713309 JT3-18-5.5x115 250
#12 x 4-1/2” HWH w/washer -DP7- 3595011381 JT3-18-5.5x115-E16 100
#12 x 6" HWH no washer -DP7- 7380714309 JT3-18-5.5x155 250
#12 x 6” HWH w/washer -DP7 3595511381 JT3-18-5.5x155-E16 100
#12 x 7-11/16" HWH no washer DP7- 7380715309 JT3-18-5.5x195 100
#12 x 7-11/16" HWH w/washer -DP7- 3596011381 JT3-18-5.5x195-E16 100
#12 x 9-1/4"HWH no washer -DP7- 7380701309 JT3-18-5.5x235 100
#12 x 9-1/4” HWH w/washer -DP7- 3597511381 JT3-18-5.5x235-E16 100
#12 x 10-7/8" HWH no washer -DP7- 7380716309 JT3-18-5.5x275 100
#12 x 10-7/8” HWH w/washer -DP7 3598011381 JT3-18-5.5x275-E16 100
Self
-dri
lling
Scre
ws
Self
-tap
ping
Sc
rew
sSo
lar
Fast
ener
sSt
orm
W
ashe
rsSp
ecia
l Sc
rew
sR
ivet
sD
irec
tFa
sten
ing
Scaf
fold
ing
Anc
hors
Dek
tite
®
Flas
hing
s
Self
-dri
lling
R
oof S
crew
sD
abo®
Stre
ss P
late
s /
Flat
Roo
fing
Tube
W
ashe
rs /
Anch
ors
Conc
rete
Scr
ews
/ Ae
rate
d
Conc
rete
Scr
ews
Anc
hors
and
In
stal
lati
on
Tech
nolo
gy
Inst
alla
tion
To
ols
Acc
esso
ries
66
Self-drilling screws JF3 /JT3A2 stainless steel with hardened steel point / steel drill point
Self
-dri
lling
Scre
ws
Application area l
steel substructure
l
substructure
Properties l A2 stainless steel with hardened drill point
l
l Pre-assembled sealing washer
Ø [mm]
Length [mm]
Clamp thickness[mm]
PUPrice/100
[EUR]Order description Article number
Sealing washer E11, Ø 11 mm
5.5 40 11 500 JT3-FR-12-5.5x40-E11 3 595 669 318
Ø [mm]
Length [mm]
Clamp thickness[mm]
PUPrice/100
[EUR]Order description Article number
Sealing washer E16, Ø 16 mm
5.5 55 0 - 18 500 JT3-18-5.5x55-E16 3 593 011 381
Application Range l
-
structure
l
Properties l A2 stainless steel with hardened drill point
l
l Pre-assembled sealing washer
EJOT® SUPER-SAPHIR self-drilling screw JT3-FR-12-5.5with truss head
EJOT® SUPER-SAPHIR self-drilling screw JT3-18-5.5
Technical Data
Drilling capacity tI + tII 1.0 + 12.0 mm / 2.0 + 10.0 mm
Drive Hexalobular drive T25
Technical Data
Drilling capacity tI + tII 1.0 + 18.0 mm / 2.0 + 16.0 mm
Drive Hexagon AF8
T25
J3
ApprovalETA-10/0200ETA-13/0177
Cross reference pageAccessories ............................... 202FR-tool ...................................... 200Metal screwdriver SCS 6.3 ........ 189
NEW
AF8
J3
Cross reference pageAccessories ............................... 202ORKAN storm washers................ 98Self-tapping screw JZ3-6.3 ......... 84Metal screwdriver SCS 6.3 ........ 189Metal screwdriver SCS 6.3-SH2 189
Availablein June 2015!
Self
-dri
lling
Scre
ws
Self
-tap
ping
Sc
rew
sSo
lar
Fast
ener
sSt
orm
W
ashe
rsSp
ecia
l Sc
rew
sR
ivet
sD
irec
tFa
sten
ing
Scaf
fold
ing
Anc
hors
Dek
tite
®
Flas
hing
s
Self
-dri
lling
R
oof S
crew
sD
abo®
Stre
ss P
late
s /
Flat
Roo
fing
Tube
W
ashe
rs /
Anch
ors
Conc
rete
Scr
ews
/ Ae
rate
d
Conc
rete
Scr
ews
Anc
hors
and
In
stal
lati
on
Tech
nolo
gy
Inst
alla
tion
To
ols
Acc
esso
ries
66
Self-drilling screws JF3 /JT3A2 stainless steel with hardened steel point / steel drill point
Self
-dri
lling
Scre
ws
Application area l
steel substructure
l
substructure
Properties l A2 stainless steel with hardened drill point
l
l Pre-assembled sealing washer
Ø [mm]
Length [mm]
Clamp thickness[mm]
PUPrice/100
[EUR]Order description Article number
Sealing washer E11, Ø 11 mm
5.5 40 11 500 JT3-FR-12-5.5x40-E11 3 595 669 318
Ø [mm]
Length [mm]
Clamp thickness[mm]
PUPrice/100
[EUR]Order description Article number
Sealing washer E16, Ø 16 mm
5.5 55 0 - 18 500 JT3-18-5.5x55-E16 3 593 011 381
Application Range l
-
structure
l
Properties l A2 stainless steel with hardened drill point
l
l Pre-assembled sealing washer
EJOT® SUPER-SAPHIR self-drilling screw JT3-FR-12-5.5with truss head
EJOT® SUPER-SAPHIR self-drilling screw JT3-18-5.5
Technical Data
Drilling capacity tI + tII 1.0 + 12.0 mm / 2.0 + 10.0 mm
Drive Hexalobular drive T25
Technical Data
Drilling capacity tI + tII 1.0 + 18.0 mm / 2.0 + 16.0 mm
Drive Hexagon AF8
T25
J3
ApprovalETA-10/0200ETA-13/0177
Cross reference pageAccessories ............................... 202FR-tool ...................................... 200Metal screwdriver SCS 6.3 ........ 189
NEW
AF8
J3
Cross reference pageAccessories ............................... 202ORKAN storm washers................ 98Self-tapping screw JZ3-6.3 ......... 84Metal screwdriver SCS 6.3 ........ 189Metal screwdriver SCS 6.3-SH2 189
Availablein June 2015!
DP7 #12 Gauge Fastener for Fastening from #9 Gauge to 3/4” Steel
Application Fastening profiled steel and aluminium sheet and sandwich panels to 4·16 mm steel substructure
- Fastening profiled aluminium sheet and sandwich panels to 4-18 mm aluminium substructure
*Also available in Marine Grade 316 (A4) stainless steel.
12
EJOT SAPHIR® Self-Drilling Fasteners JT3
High Thread fasteners DP1 for Timber and up to #14 Gauge Steel
Item Description SAP Code MFR Model No BoxQty
1/4"/#17 x 4” - HWH no washer -DP1HT- 7380666301 JT3-D-2H-6.5/7.0x100 100
1/4"/#17 x 4” S5/8 - HWH w/washer -DP1HT- 3558411351 JT3-D-2H-6.5/7.0x100-E16 100
1/4"/#17 x 4-3/4” - HWH no washer -DP1HT- 7380667301 JT3-D-2H-6.5/7.0x120 200
1/4"/#17 x 4-3/4”- HWH w/washer -DP1HT- 3558511351 JT3-D-2H-6.5/7.0x120-E16 100
1/4"/#17 x 5-1/2” - HWH no washer -DPHT1- 7380668301 JT3-D-2H-6.5/7.0x140 100
1/4"/#17 x 5-1/2” - HWH w/washer -DP1HT- 3558611351 JT3-D-2H-6.5/7.0x140-E16 100
1/4"/#17 x 6-3/8” - HWH no washer -DP1HT- 7380602301 JT3-D-2H-6.5/7.0x160 100
1/4"/#17 x 6-3/8”- HWH w/washer -DP1HT- 3558711351 JT3-D-2H-6.5/7.0x160-E16 100
1/4"/#17 x 7” - HWH no washer -DP1HT- 7380669301 JT3-D-2H-6.5/7.0x180 100
1/4"/#17 x 7” S5/8 - HWH w/washer -DP1HT- 3558811351 JT3-D-2H-6.5/7.0x180-E16 100
1/4"/#17 x 7-7/8” - HWH no washer -DP1HT- 7380655301 JT3-D-2H-6.5/7.0x200 100
1/4/#17 x 7-7/8” - HWH w/washer -DP1HT- 3558911351 JT3-D-2H-6.5/7.0x200-E16 100
1/4"/#17 x 8-5/8” - HWH no washer -DP1HT- 7380689301 JT3-D-2H-6.5/7.0x220 100
1/4/#17 x 8-5/8” - HWH w/washer -DP1HT- 3559311351 JT3-D-2H-6.5/7.0x220-E16 100
1/4"/#17 x 9-1/2”- HWH no washer -DP1HT- 7380656301 JT3-D-2H-6.5/7.0x240 100
1/4"/#17 x 9-1/2”- HWH w/washer -DP1HT- 3559011351 JT3-D-2H-6.5/7.0x240-E16 100
1/4"/#17 x 11" HWH no washer -DP1HT- 7380657301 JT3-D-2H-6.5/7.0x280 100
1/4"/#17 x 11”- HWH w/washer -DP1HT- 3559111351 JT3-D-2H-6.5/7.0x280-E16 100
1/4"/#17 x 11-3/4”- HWH no washer -DP1HT- 7380665301 JT3-D-2H-6.5/7.0x300 100
1/4"/#17 x 11-3/4”- HWH w/washer -DP1HT- 3559211321 JT3-D-2H-6.5/7.0x300-E16 100
Application Steel Profiles Insulated Sandwich Panels - Fixing into up to #14 Gauge Steel and Timber
13
Call: (248) 938 4067 Email: infoUS@ejot.com www.ejot-usa.com
Item Description SAP Code MFR Model No BoxQty
#12/14 x 2-5/8" HWH- no washer -DP3HT- 7380500301 JT3-D6H-5.5/6.3 x 67 250
#12/14 x 2-5/8” HWH w/washer -DP3HT- 3554511372 JT3-D6H-5.5/6.3 x 67 E16 250
#12/14 x 3-3/8” - HWH no washer -DP3HT 7380425301 JT3-D6H-5.5/6.3 x 87 250
#12/14 x 3-3/8”- HWH w/washer -DP3HT- 3556011371 JT3-D6H-5.5/6.3 x 87 E16 100
#12/14 x 4-1/4” - HWH no washer -DP3HT- 7380426301 JT3-D6H-5.5/6.3 x 107 200
#12/14 x 4-1/4”- HWH w/washer -DP3HT- 3556111371 JT3-D6H-5.5/6.3 x 107 E16 100
#12/14 x 5” - HWH no washer -DP3HT- 7380427301 JT3-D6H-5.5/6.3 x 127 200
#12/14 x 5” HWH w/washer -DP3HT- 3556211371 JT3-D6H-5.5/6.3 x 127 E16 100
#12/14 x 5-7/8” - HWH no washer -DP3HT- 7380428301 JT3-D6H-5.5/6.3 x 147 200
#12/14 x 5-7/8”- HWH w/washer -DP3HT- 3556311371 JT3-D6H-5.5/6.3 x 147 E16 100
#12/14 x 6-1/2” - HWH no washer -DP3HT- 7380543301 JT3-D6H-5.5/6.3 x 167 100
#12/14 x 6-1/2”- HWH w/washer -DP3HT- 3556711371 JT3-D6H-5.5/6.3 x 167 E16 100
#12/14 x 7-7/8” - HWH no washer -DP3HT- 7380493301 JT3-D6H-5.5/6.3 x 197 200
#12/14 x 7-7/8”- HWH w/washer -DP3HT- 3559711372 JT3-D6H-5.5/6.3 x 197 E16 100
#12/14 x 9-3/8" - HWH no washer -DP3HT- 7380568301 JT3-D6H-5.5/6.3 x 237 100
#12/14 x 9-3/8" - HWH w/washer -DP3HT- 3559611372 JT3-D6H-5.5/6.3 x 237 E16 100
#12/14 x 10-5/8" - HWH no washer -DP3HT- 7380636301 JT3-D6H-5.5/6.3 x 267 100
#12/14 x 10-5/8" HWH w/washer -DP3HT- 3559911372 JT3-D6H-5.5/6.3 x 267 E16 100
High Thread fasteners DP3 For Fastening from #16 Gauge to 1/4” Steel
���������������������������������
Application Steel profiled insulated sandwich panels
- Steel sections from 0.047 - .236” in thickness
Drill and tap capacity .059 - .236”
Drill and tap capacity 1.2 - 6mm
Drill Point 3
14 Threads Per Inch
14
EJOT SAPHIR® Self-Drilling Fasteners JT3
High Thread fasteners DP5 For Fastening from #9 Gauge Steel to ½”
���������������������������������
Application Steel faced insulated sandwich panels
- Steel sections from 0.157 - .472” in thickness
Drill and tap capacity .157 - .472”
Drill and tap capacity 4 - 12mm
Drill Point 5
14 Threads Per Inch
Item Description SAP Code MFR Model No BoxQty
#12/14 x 3" HWH no washer -DP5HT- 7380501309 JT3-D12H-5.5/6.3 x 75 250
#12/14 x 3" HWH w/washer -DP5HT- 3557511312 JT3-D12H-5.5/6.3 x 75 E16 250
#12/14 x 3-3/4” HWH no washer -DP5HT- 7380455309 JT3-D12H-5.5/6.3 x 95 250
#12/14 x 3-3/4” HWH w/washer -DP5HT- 3554911311 JT3-D12H-5.5/6.3 x 95 E16 100
#12/14 x 4-1/2” HWH no washer -DP5HT- 7380456309 JT3-D12H-5.5/6.3 x 115 200
#12/14 x 4-1/2” HWH w/washer -DP5HT- 3555211311 JT3-D12H-5.5/6.3 x 115 E16 100
#12/14 x 5-3/8” HWH no washer -DP5HT- 7380432309 JT3-D12H-5.5/6.3 x 135 200
#12/14 x 5-3/8” HWH w/washer -DP5HT- 3555411311 JT3-D12H-5.5/6.3 x 135 E16 100
#12/14 x 6-1/4” HWH no washer -DP5HT- 7380457309 JT3-D12H-5.5/6.3 x 155 200
#12/14 x 6-1/4” HWH w/washer -DP5HT- 3555711311 JT3-D12H-5.5/6.3 x 155 E16 100
#12/14 x 6-7/8” HWH no washer -DP5HT- 7380518309 JT3-D12H-5.5/6.3 x 175 200
#12/14 x 6-7/8” HWH w/washer -DP5HT- 3556511312 JT3-D12H-5.5/6.3 x 175 E16 100
#12/14 x 7-6/8” HWH no washer -DP5HT- 7380502309 JT3-D12H-5.5/6.3 x 195 200
#12/14 x 7-6/8”HWH w/washer -DP5HT- 3559511312 JT3-D12H-5.5/6.3 x 195 E16 100
#12/14 x 9-6/8” HWH no washer -DP5HT- 7380569309 JT3-D12H-5.5/6.3 x 245 100
#12/14 x 9-6/8” HWH w/washer -DP5HT- 3559811312 JT3-D12H-5.5/6.3 x 245 E16 100
#12/14 x 10-7/8” HWH no washer -DP5HT- 7380634309 JT3-D12H-5.5/6.3 x 275 100
#12/14 x 10-7/8” HWH w/washer -DP5HT- 3557311312 JT3-D12H-5.5/6.3 x 275 E16 100
15
Call: (248) 938 4067 Email: infoUS@ejot.com www.ejot-usa.com
Low Profile Fasteners
Pancake Head
���������������������������������
Application Clips
- Steel section from 0.047 - .118” in thickness
Drill and tap capacity .047 - .118”
Drill and tap capacity 1.2 - 3mm
Drill Point 2
14 Threads Per Inch
Item Description SAP Code MFR Model No BoxQty
#12 x 1" Pancake Head - DP2- 7384126301 JT3-LT3 5.5 x 25 1000
Item Description SAP Code MFR Model No BoxQty
#12 x 1-1/4" Pancake Head DP2 (5/8"Head) 7384211301 JT3-LT-3-5.5 x 30 500
Item Description SAP Code MFR Model No BoxQty
#12 x 1-1/4" Pancake Head Sharp Point (5/8"Head) 7384212301 JF3-LT-2-5.5 x 30 500
Pancake Head DP2
Application Fastening facade panels to 1.5-2.5 mm aluminum and steel substructures
Can be combined with LT fixed and floating point sleeves
Note
Please note the respective approval of the facade panel and the assembly instructions of the manufacturer.
Pancake Head Sharp Point
Application For fixing facade panels to 1.0-2.0 mm aluminum substructures without swarfs
Can be combined with LT fixed and floating point sleeves
Note
Please note the respective approval of the facade panel and the assembly instructions of the manufacturer.
16
EJOT SAPHIR® Self-Drilling Fasteners JT3
Button Head Fasteners
Drill Point
Application Laps of roofing or cladding sheets and flashings
- Laps of roofing or cladding sheets
Drill Point 1
14 Threads Per Inch
Sharp Point
Application Laps of roofing or cladding sheets and flashings
- Laps of roofing or cladding sheets
Drill Point 1
18 Threads Per Inch
Item Description SAP Code MFR Model No BoxQty
#12 x 1" -Button Head no washer Sharp Point 7384196301 JF3-FR2-5.5 x 25 500
#12 x 1" - Button Head w/washer Sharp Point 3593292391 JF3-FR2-5.5 x 25 E11 500
Item Description SAP Code MFR Model No BoxQty
#10 x 3/4” Button Head no washer -DP1 7381106301 JT3-FR-2H-4.8 x 19 1000
#10 x 3/4” Button Head- w/washer -DP1- 3591968358 JT3-FR-2H-4.8 x 19 E11 500
#12 x 1” -Button Head DP1 no washer -DP1- 7384165301 JT3-FR-2H-Plus-5.5 x 25 1000
#12 x 1” Button Head- w/washer -DP1- 3592269398 JT3-FR-2H-Plus-5.5 x 25 E11 500
Button Head DP2 #12 Gauge Fastener for Fastening from #18 Gauge to 1/8” Steel���������������������������������
Application Roofing or cladding steel or aluminum sheets
- Steel sections from .059 - .118” in thickness
Drill and tap capacity .059 - .118”
Drill and tap capacity 1 - 3mm
Drill Point 2
14 Threads Per Inch
Item Description SAP Code MFR Model No BoxQty
#12 x 2” - Button Head no washer -DP2 7381126301 JT3-FR3-5.5 x 50 500
#12 x 2” Button Head- w/washer -DP2- 3592869335 JT3-FR3-5.5 x 50 E11 250
���������������������������������
Application Roofing or cladding steel or aluminum sheets
- Timber
Mechanical performance is dependant on embedment and grade of timber
Drill Point 1
14 Threads Per Inch
Item Description SAP Code MFR Model No BoxQty
#10 x 1-3/8” -Button Head no washer -DP1- 7381092301 JT3-FR-2-4.9 x 35 500
#10 x 1-3/8 “Button Head-w/washer -DP1- 3593568328 JT3-FR-2-4.9 x 35 E11 500
17
Call: (248) 938 4067 Email: infoUS@ejot.com www.ejot-usa.com
Button Head DP3 #12 Gauge Fastener for Fastening from #16 Gauge to 1/4” Steel
���������������������������������
Application Roofing or cladding steel or aluminum sheets
- Steel sections from .059 - .236” in thickness
Drill and tap capacity .059 - .236”
Drill and tap capacity 1.5 - 6mm
Drill Point 3
14 Threads Per Inch
Item Description SAP Code MFR Model No BoxQty
#12 x 1” Button Head no washer -DP3- 7384077301* JT3-FR-6-5.5 x 25 1000
#12 x 1” Button Head-w/washer -DP3- 3592269368* JT3-FR-6-5.5 x 25 E11 500
#12 x 1-3/8” Button Head-no washer -DP3- 7384101301 JT3-FR-6-5.5 x 35 500
#12 x 1-3/8”Button Head-w/washer -DP3- 3592569368 JT3-FR-6-5.5 x 35 E11 500
Button Head DP5 #12 Gauge Fastener for Fastening from #9 Gauge to 1/2” Steel
���������������������������������
Application Roofing or cladding steel or aluminum sheets
- Steel sections from .157 - .472” in thickness
Drill and tap capacity .157 - .472”
Drill and tap capacity 4 - 12mm
Drill Point 5
14 Threads Per Inch
Item Description SAP Code MFR Model No BoxQty
#12 x 1/1/2” Button Head- no washer -DP5- 7384134309 JT3-FR-12-5.5 x 40 500
#12 x 1/1/2”Button Head-w/washer -DP5- 3595669318 JT3-FR-12-5.5 x 40 E11 500
Countersunk Wing Drillers
Application Special screw for fixing timber to metal substructures
To ensure shearing of the wings, the material thickness of the metal substructure must be at least 2.0 mm.
A2 stainless steel with hardened drill point
The wings ream out the wood larger than the thread diameter
The wings prevent force feeding of the screw and thus possible damage to the drill point or locking of the assembly parts.
Item Description SAP Code MFR Model No BoxQty
#12 x 1-3/4" -WD-DP3- 7382195301 JT3-WD-6-5.5 x 45-R 500
#12 x 2-1/2"" -WD-DP3- 7382194301 JT3-WD-6-5.5 x 65-R 250
Countersunk Flange Head
Application Fixing board into up to #14 Gauge Steel stud.
Item Description SAP Code MFR Model No BoxQty
#13 x 1" C/SK Flange head DP1 7384099301 JT3-STS-2-6.0 x 28 500
*Also available in Marine Grade 316 (A4) stainless steel.
18
EJOT SAPHIR® Self-Drilling Fasteners JT3
304 (A2) Stainless-Steel Bi-Metal Self-Drilling Fastener Technical Information
Sharp Point (JF3) For #29 Gauge to #18 Gauge Steel
Gauge Shear Tensile Pull Out lbs Average Ultimate
#26 #24 #20 #18
#10 1198 1898 192 275 364 558
#12 1912 2732 259 334 497 761
Drill Point 1 (JT3-2H) For Sheet Metal #26 Gauge to #18 Steel
Gauge Shear Tensile Pull Out lbs Average Ultimate
#26 #24 #20 #18
#10 1146 1809 160 229 303 465
#12 1978 2630 170 281 346 544
Drill Point 2 (JT3-3) Will drill and tap from #18 Gauge to 1/8” Steel
Gauge Shear Tensile Pull Out lbs Average Ultimate
#18 #16 #14 1/8”
#12 1686 2585 472 575 894 1758
#14 2879 3185 674 968 1106 2007
Drill Point 3 (JT3-6) Will drill and tap from #18 Gauge to 1/4” Steel
Gauge Shear Tensile Pull Out lbs Average Ultimate
#16 #14 1/8” 1/4”
#12 1686 2585 535 820 1283 Ultimate Tensile
#14 2877 3169 822 1517 1919 Ultimate Tensile
Drill Point 5 (JT3-12) Will drill and tap from #9 Gauge to 1/2” Steel
Gauge Shear Tensile Pull Out lbs Average Ultimate
#9 #6 #4 1/4”
#12 2045 2810 1854 2380 Ultimate Tensile Ultimate Tensile
Drill Point 7 (JT3-18) Will drill and tap from #9 Gauge to 3/4” Steel
Gauge Shear Tensile Pull Out lbs Average Ultimate
#9 #6 #4 1/4”
#12 2045 2810 1854 2380 Ultimate Tensile Ultimate Tensile
Figures based on tests from steel designated as Grade Z35 (BS 2989)
19
Call: (248) 938 4067 Email: infoUS@ejot.com www.ejot-usa.com
Product code Drill point Ø x L Drill speeds
End load Lbs1300 rpm 1500 rpm 1800 rpm
JT3-2- DP1 # 10 x All 40
JT3-FR-2- DP1 # 10 x All 40
JT3-2H Plus - DP2 #12 x All 50
JT3-FR-2H Plus- DP2 #12 x All 50
JT3-2-6 x DP1 #13 x All 40
JT3-ST-2- DP1 #13 x All 40
JT3-X-2- DP1 #13 x All 40
JT3-X2-6 x 60/25 DP1 #13 x All 40
JT3-2- DP1 #14 x All 40
JT3-2- DP1 1/4 x All 40
JT3-3- DP2 #12 x All 50
JT3-FR-3- DP2 #12 x All 50
JT3-LT-3- DP2 #12 x All 50
JT3-3- DP2 #14 x All 50
JT3-X-4- DP2 #14 x All 50
JT3-6- DP3 #12 x All 60
JT3-D-6H-5.5/6.3 DP3 #12/14 x All 60
JT3-FR-6- DP3 #12 x All 60
JT3-12-5.5 DP5 #12 x All 70
JT3-D-12H-5.5/6.3 DP5 #12/14 x All 70
JT3-FR-12- DP5 #12 x All 70
JF3-2- Sharp #10 x All 50
JF3-2- Sharp #12 x All 50
Installing EJOT Bi-metal self-drilling fasteners
EJOT Bi-metal self-drilling fasteners should be installed using a correctly powered screwdriver rotating with in the tolerance of the drill speeds in the table below. The screwdriver should be equipped with the correct driving attachments and adjustable nose piece.
The screwdriver should be positioned perpendicular to the material being fixed.
An applied force equal to the end load figures given in the table “Recommended drill speeds and end loads” should be maintained during the drilling and tapping operation. The screwdriver should be set to automatically disengage its clutch when the depth sensing nose piece makes contact with the surface of the material being fixed.
We would recommend that initial trial drives are carried out on a spare piece of material before commencing work, the purpose of the trial drives is to ensure that the screwdriver’s clutch disengages before damage is done to the fastener or materials whilst ensuring correct
mechanical joint is achieved.
RECOMMENDED DRILL SPEEDS AND END LOADS
EJOT The Quality Connection10 - 20
USA
EJOT Fastening Systems L.P.
Construction Fastener &
Industrial Fastener Divisions
Applitec Lab and Testing Facility
48679 Alpha Dr, Suite 110
Wixom, MI 48393
Tel: 248-773-7453
Email: infoUS@ejot.com
www.ejot-usa.com
Canada
EJOT Construction Fastening
Systems Inc
Construction Division
50 Fleming Drive, Unit #4
Cambridge, ON N1T 2B1
Tel: 226-499-9977
Email: infoca@ejot.com
www.ejot.ca
Mexico
EJOT SISTEMAS DE CONSTRUCCIÓN, S. DE R.L. DE C.V.
CUATIPARK II ETAPA 2
Carretera Puente Grande Las Ánimas S/N
Lote 5, Manzana 800 Bogedas 13 Y 14
Colonia “La Victoria” Municipio de Teoloyucan
Estado de México, México C. P. 54785
Tel: +52 444 8 70 82 25
Email: aasarlioglu@ejot.com
www.ejot.com
@EJOT_USAwww.ejot-usa.com ejotfasteningsystems
With over 30 years of experience, development and technical expertise, EJOT understands the requirements for a fastener and its application on building envelopes. Our knowledge provides the base and source of our products and EJOT’s solutions offer our customers real benefits.
The quality of our products surpasses planning laws and legal requirements. Our aim is to ensure quick and easy assembly.
EJOT USA’s and supply base is complemented with EJOT’s global sales and service network as well as project support teams ready to help our customers at any time, nationally and internationally.
top related