standard horizontal horizontal truss · pdf filethe universal system scaffold rosette provides...
Post on 14-Feb-2018
218 Views
Preview:
TRANSCRIPT
Standard Horizontal Horizontal Truss
Stairs
LaddersTruss
Casters & Caster AdaptersTruss AdaptersTruss Plank Support
The Universal System Scaffold Rosette provides total flexibility to lock in any angle plus quickly and accurately align at 90° angles using the keyholepositions. Each Rosette can have up to eight connections at one time.
System Scaffolding Advantages:• Hot-dipped galvanized• No bolts or screws• Pre-measured components/
No measurements needed• Erects efficiently
• Conforms to any angle or curve• Rigid, versatile and very safe• Can be used in conjunction with
Tube and Clamp
Part No. Height WeightUS17T (Topping 1’ 7” 6.0 lbs
Off Column)US17 (1 Rosette) 1’ 7” 6.0 lbsUS33 (2 Rosettes) 3’ 3” 11.9 lbsUS411 (3 Rosettes) 4’ 11” 18.0 lbsUS66 (4 Rosettes) 6’ 6” 21.0 lbsUS99 (6 Rosettes) 9’ 9” 30.2 lbs
Part No. Length WeightUH20 (Blank) 2’ 6.0 lbsUH30 (Yellow) 3’ 8.3 lbsUH36 (Black) 3’ 6” 9.4 lbsUH40 (Orange) 4’ 10.5 lbsUH50 (Brown) 5’ 12.8 lbs
Part No. Length WeightUH60 (Blue) 6’ 15.0 lbsUH70 (Blank) 7’ 17.3 lbsUH80 (Green) 8’ 19.5 lbsUH100 (Red) 10’ 24.0 lbs
Part No. Length WeightU-SAUB Ladder Bracket 5.5 lbsU-SAU3 3’ Ladder Section 9.0 lbsU-SAU6 6’ Ladder Section 17.0 lbs
Part No. Description WeightUCBC Caster Base Collar 7.0 lbsF-8R 8” Pin Type Caster 13.0 lbsUS12CA 12” Caster Adapter 8.5 lbsP-12R 12” Plate Type Caster 38.0 lbs
Part No. Description WeightUCCS Clamp on 3.0 lbs
Column SupportUSTA Truss Adapter 3.5 lbsUHTCS Truss Column 7.0 lbs
Saddle
Part No. Length WeightUTPS20 2’ 15.1 lbsUTPS30 3’ 17.6 lbsUTPS36 3’ 6” 19.0 lbsUTPS40 4’ 19.9 lbsUTPS50 5’ 22.3 lbs
Part No. Length WeightUT12 12’ 81.0 lbsUT14 14’ 106.0 lbsUT16 16’ 106.0 lbsUT20 20’ 135.0 lbs
Part No. Length WeightUHT50 (Brown) 5’ 15.6 lbsUHT60 (Blue) 6’ 18.5 lbsUHT70 (Blank) 7’ 24.5 lbsUHT80 (Green) 8’ 36.8 lbsUHT100 (Red) 10’ 39.6 lbs
Part No. Description WeightUSSL70 7’ Left Stair Stringer 49.0 lbsUSSR70 7’ Right Stair Stringer 49.0 lbsUSTL Left Starter Stair Stringer 26.0 lbsUSTR Right Starter Stair Stringer 26.0 lbs
Part No. Description WeightUST26 2’ 6” Tread 11.5 lbs
(Use in 3’ 6” Bay) UST30 3’ Tread 13.8 lbs
(Use in 4’ Bay) UST40 4’ Tread 18.0 lbs
(Use in 5’ Bay)
Load Bearing
Non-Load Bearing
Load Bearing
*Also Available in 1-8 Step
universalscaffold.com 800-836-8780
stekcarB draoBstekcarB ediSlanogaiD
Scaffold RackLow Profile Steel Plank Hoist
Plan Braces Base Collar
Adjustable Base
The high-strength Mouthpiece uses a Wedge Pin with a reverse slope.The Wedge Pin engages the Rosette entirely through its vertical surface,ensuring a properly seated Mouthpiece on the Rosette while the Wedge isin place. The lobes are reversed to dramatically increase the compressionarea of the Mouthpiece connector. This provides greater mass area at thebottom of the Mouthpiece.
Part No. Bay Size WeightUD20 (Blank) 2’ 16.9 lbsUD30 (Yellow) 3’ 16.9 lbsUD36 (Black) 3’ 6” 17.3 lbsUD40 (Orange) 4’ 17.6 lbsUD50 (Brown) 5’ 18.6 lbsUD60 (Blue) 6’ 19.7 lbsUD70 (Blank) 7’ 21.5 lbsUD80 (Green) 8’ 22.2 lbsUD100 (Red) 10’ 25.0 lbs
Part No. Length WeightUSB20 2’ 14.0 lbsUSB30 3’ 21.0 lbsUSB36 3’ 6” 31.0 lbs
Part No. Length WeightUBB010 10” 3.1 lbsUBB010CO 10” 3.1 lbsUBB18 1’ 8” 8.0 lbsUBB27 2’ 7” 12.5 lbs
Part No. Description WeightU-SR-CS Scaffold Rack 116.0 lbs
Part No. Description WeightUSH-T System Hoist Top 10.0 lbsUSH-B System Hoist 15.0 lbs
BottomHAW-12 Hoist Arm Wheel 16.5 lbs
Part No. Length WeightUSP20ADG 2’ 10.9 lbsUSP30ADG 3’ 15.0 lbsUSP36ADG 3’ 6” 17.0 lbsUSP40ADG 4’ 19.3 lbsUSP50ADG 5’ 23.0 lbsUSP60ADG 6’ 27.0 lbsUSP70ADG 7’ 32.0 lbsUSP80ADG 8’ 35.0 lbsUSP100ADG 10’ 44.0 lbs
Part No. Description WeightUBC Base Collar 3.5 lbsUBCB Base Collar 6.0 lbs
with Bushing
Part No. Bay Size WeightUPB3670 3’ 6” x 7’ 19 lbsUPB4070 4’ x 7’ 19.8 lbsUPB5070 5’ x 7’ 20.5 lbs*Call for additional sizes.
Part No. Description WeightUSJ20 Screw Jack 13.8 lbsUSSJ20 Swivel Screw Jack 15.0 lbs
*All Sizes Available in 6” Wide Plank
UMC-429 Cover 17.qxd 2/21/11 11:49 AM Page 3
top related