static & dynamic lung volumes lab 6. spirometer n classic instrument for measuring air volumes –...
Post on 21-Dec-2015
214 Views
Preview:
TRANSCRIPT
- Slide 1
- Static & Dynamic Lung Volumes Lab 6
- Slide 2
- Spirometer n Classic instrument for measuring air volumes Wet- Consists of an air collecting bell inverted in a vessel of water Amount of water displaced gives you estimate of the air required to displaces it
- Slide 3
- Spirometer n Useful for static volume measurement Vital capacity Peak airflow n Limited usefulness when measuring rapid volume changes- speech Inertia of the bell Sluggish response Total volume is not obscured but breath group data is!
- Slide 4
- Chest Wall Measurement n Lung volume can be determined from changes in rib cage and abdominal size n Devices for transducing size changes: Magnetometers Mercury strain gauges Inductance plethysmography Respitrace
- Slide 5
- Chest Wall Measurement n Chest walls 2 parts (rib cage & abdomen), Contribute to the total lung volume change Rib cage and abdomen movement are not 1:1 so calibration of abdomen & rib cage are completed
- Slide 6
- Normal Adult- 20 year old Male V tl Red= LV Green= RC Blue = AB Yellow= Audio
- Slide 7
- Normal Adult- 20 year old Male V tl RC AB Audio LV
- Slide 8
- Red= LV Green= RC Blue = AB Yellow= Audio Lt. Blue = Orange = P t Multihandicapped Adult- 36 year old Male
- Slide 9
- V tl PtPt LV RC AB Audio
- Slide 10
- Articulatory & Phonatory Volumes n Specific articulatory events & phonatory tasks can be measured by: Spirometer- Although not accurate enough n Poor resolution & frequency response Respitrace- Also not accurate enough n Poor time resolution Pneumotachograph n Integration of the flow signal to get volume n Shows very small volume changes in a fraction of a second
- Slide 11
- Pneumotachograph vs. Spirometer Greater squareness of the corners indicate better frequency response
- Slide 12
- Air Volume Measurements n Volume is calculated by multiplying mean flow by the events duration .123 (flow) x 20 (duration)= 2.46 L (volume) Not always the most accurate method for measuring articulatory volumes
- Slide 13
- Laboratory n Purpose: Measure a patient's forced vital capacity (FVC) Evaluate maximum phonation volume Derive estimates of mean airflow from a volume record Estimate lung volume used for each breath group during reading of a standard passage (in absolute terms and as a %age of FVC)
- Slide 14
- Laboratory n Part I- FVC= maximum amount of air that can be expired after a maximal inspiration- represents the total amount of air that is available for use. Measure height of patient Measure FVC with spirometer or aerophone n Max. inhalation at REL, then max exhalation n 3 trials n Determine patients expected FVC (norms or formula in Appendix G
- Slide 15
- Laboratory n Part II: Phonation volume (PV)= the maximum amount of air that is available for a maximally sustained phonation Use sample (figure A) of sustained / a / for the lab questions n Is PV normal (Use norms in text) n Abnormal PV might occur in which pathological conditions? For the patient exercise do a sustained / a / on the aerophone, mark it and calculate volume.
- Slide 16
- Laboratory n Part III: Assessment of lung volume change during a speaking task (how a patient manages air for speech purposes) Duration & relative volume of each breath group (amount of air expressed as a %age of VC) Mark speaking record n Use Figure B
- Slide 17
- Laboratory Analysis questions for part III: n Find REL- draw line across bottom of cycle n Divide into 10 equal segments (10% each) n Mark each breath group n The FVC for this sample will be ? n To calculate %age of VC: Volume (in Liters) x 100 / VC in L ex..64 x 100/ 4.4= 14.5%
- Slide 18
- Laboratory n Mean airflow data Used to assess more general characteristics of ventilatory, laryngeal and/or articulatory function Mean speech airflow= volume of air the speaker uses divided by the duration of the utterance
- Slide 19
- Laboratory n Part IV: Use Figs. 3 & 4 of the running speech samples and highlight the mean flow rate from your calculations n baseline volume= where speech begins n Finishing volume= where speech ends n Total volume= baseline volume-finishing volume n Speech volume of each breath group & expiration duration n Mean airflow rate= mean speech volume/mean duration
top related