stellarflex fr (fuel resistant) asphalt
Post on 16-Jul-2015
149 Views
Preview:
TRANSCRIPT
• Everincreasingtraffic.
• Newaircraftlandinggear
configurations.
• Higheraxleloadsand
highertirepressures.
• Increased“stacking”and
heavyweightstandingload.
• Occasionalfuelleaksand
spills.
Theseareallfactorsthatcreate
punishingconditionsand
significantlyincreasethestress
thatpavementsmustendure.
Soundfamiliar?Ifyou’re
dealingwithanycombination
ofthesefactors.Youknow
firsthandhowtheypersistently
ravageanderodeyourhigh
traffic,heavy-dutyasphalt
surfaces–andyourbudget.
Fuel ResistantStellarFlex FR
Permanent DeformationFatigue
Fatigue Life measured by the Flexural Beam Fatigue Tester at test frequency of 10 Hz, temperature of 15°C and at a tensile micro-strain of 1,000. Failure is determined by number of cycles required to reduce beam stiffness to 50% of initial stiffness.
0
5000
10000
15000
20000
25000
30000
35000
PG 64-22 PG 76-22 PG 82-22 Stellarflex FR
Cycl
es to
nf,5
0%
PG Binder Grade
Flexural Beam Fatigue Life
Permanent Deformation measured by Asphalt Pavement Analyzer test machine. Test run for 8,000 cycles at 64°C with 100 psi hose pressure. Rutting measured in mm at end of 8,000 cycles.
0
2
4
6
8
10
12
PG 64-22 PG 76-22 PG 82-22 StellarFlex FR
APA
Rut
ting
, mm
PG Binder Grade
Permanent Deformation
Fuel ResistantStellarFlex FR
Reflective Cracking Pavement Design
Asphalt Mixture Performance Tester (AMPT) Flow Number results from Repeated Load Permanent Deformation Testing (Higher Fn means lower rutting potential).
02000400060008000
100001200014000160001800020000
PG 64-22 PG 76-22 PG 82-22 StellarFlex FR
Flow
Num
ber
(Fn)
PG Binder Grade
AMPT Flow Number
Fracture Energy, as measured by Indirect Tensile Strength Test @ 0°C. (Higher Fracture Energy indicates greater resistance to low temperature cracking)
0
2
4
6
8
10
12
14
16
PG 64-22 PG 76-22 PG 82-22 StellarFlex FR
Frac
ture
Ene
rgy
(Nm
m/m
m2 )
PG Binder Grade
Low Temperature Cracking
StellarFlex FR is a safe, worker-friendly, long-term durable material that incorporates specific polymers into the
bituminous mix to provide excellent fuel resistant properties.
As these polymers vastly strengthen and improve the properties of the asphalt mix, just one application of Stellar Flex FR is sufficient for the long haul. Since introduced in 1996,
this technology has been withstanding extreme trials of wear and tear, adding to your long-term cost savings and eliminating the need for hazardous coal tar applications.
Using StellarFlex FR results in long-term savings as it’s the most cost-effective way to deal with the punishing conditions that heavy-duty asphalt
pavements endure.
Asphalt mixes incorporating StellarFlex FR are characterized by:• High resistance to permanent deformation• High resistance to fatigue cracking• High resistance to thermal cracking• High flexibility (excellent elastic recovery properties)• High stability• Excellent workability• High resistance to fuel damage
Now, you have another option.
“FR” = Fuel Resistance
StellarFlex FR is uniquely formulated to be resistant to diesel and jet fuel, which makes it ideally suited for pavement applications in airports, high-traffic heavy-truck roadways, fueling stations, truck stops, and fuel storage tank areas. No other asphalt binder can deliver the fuel resistance shield that you get with StellarFlex FR.
The properties of StellarFlex FR make its application ideal for the construction and maintenance of pavements exposed to extreme stress – the types encountered when heavy, slow-moving traffic combined with exposure to diesel and jet fuel, make typical pavements of any kind high maintenance and high cost. These types of stress are encountered at airport aprons, taxiways, ends of runways, fuel filling areas, truck parking areas and high standing volume truck roadways. StellarFlex FR needs only to be used in the surface layer of the pavement (minimum 1.5” thickness) to provide superior protection against the failure modes encountered in these applications. And StellarFlex FR meets the requirements of the new Federal Aviation Administration (FAA) P-601 Fuel Resistant Hot Mix Asphalt (HMA) Pavement specification.
StellarFlex FRStandard
Asphalt mixes using the StellarFlex FR binder can be produced at any hot mix plant without the need for modifications or changes in operating procedures. Therefore, StellarFlex FR provides the most cost effective means to handle these punishing conditions without the need for additional capital or operating costs in its application.
Application Production
Superior fuel resistance
Heavy-weight, high-traffic re-sistance
Extreme durability under ex-treme conditions
Cost effective
Worker friendly
Environmentally sound
Fuel ResistantStellarFlex FR
www.axeonsp.com
Paulsboro, NJ RefinerySavannah, GA Refinery
Dedicated to Quality and ServiceAxeon Specialty Products -- a new name in asphalt backed by decades of industry knowledge and experience. We’re among the nation’s leading asphalt suppliers and the third largest U.S. asphalt producer. Our proven products are refined and distributed through our Paulsboro, NJ, and Savannah, GA, facilities. Through our vast terminal network, we store and distribute millions of barrels of asphalt products domestically and internationally. We provide customers with a reliable supply of high-performance, cost-effective conventional, modified and warm mix asphalt products. In addition to our attentive asphalt retail marketing, trading, and account management professionals, our customers receive state-of-the-art technical support services from our industry experts who are dedicated to product development, solving pavement problems and providing field support.
To learn more about how we can help you with your asphalt pavement needs, visit us at www.axeonsp.com. An Axeon Specialty Products representative in your area is looking forward to helping you pave your road to success!
top related