studio adaptor - hitachi · pdf file1 rear panel of the sa-1000 operation ca-hf1000 ret1/2 sel...
Post on 16-Mar-2018
219 Views
Preview:
TRANSCRIPT
1
Rear panel of the SA-1000 operation
CA-HF1000 RET1/2 SEL switch
Extender LED Light when lens Extender x0.8 is on
POWER Lamp Light when camera Head power is supplied
Camera menu switch
Call button
Lens Extender switch Light when Extender is on
Front tally switch Selects high/low/off
ND/CC select switch
Viewfinder video select switches select R,G,B
Return Select switch RET1,2
Viewfinder display panel CS1/2
Lights when ING is on. Memory switch
CROSS,BOX1,BOX2 is memory Lights when ING is on. CROSS,BOX1,BOX2 switch
CROSS,BOX1,BOX2 control Level volume
Graticule of display level control Position H,V volume
Adjustment of position Size H,V volume Adjustment of size
2
Video switches for the View Finder (R/G/B) operation
R/G/B view finder video can be selected by R,G and B switches in the rear panel.
The selected switch’ s LED light and display video in the view finder.
Return signal selection switch operation
Return video signal can be selected by the Return Box, the rear panel of the Buildup Adapter and the lens return switch.
From the Rear panel of the buildup Adapter
Return signal Operational description
CA-HF1000 RET1 The RET SEL switch is set to CH1 and the RET1 switch
of Buildup adapter is pushed.
RET CH1
CA-HF1000 RET2 The RET SEL switch is set to CH1 and the RET2 switch
of Buildup adapter is pushed.
CA-HF1000 RET1 The RET SEL switch is set to CH2 and the RET1 switch
of Buildup adapter is pushed.
RET CH2
CA-HF1000 RET2 The RET SEL switch is set to CH2 and the RET2 switch
of Buildup adapter is pushed.
CA-HF1000 RET1 The RET SEL switch is set to CH3 and the RET1 switch
of Buildup adapter is pushed.
RET CH3
CA-HF1000 RET2 The RET SEL switch is set to CH3 and the RET2 switch
of Buildup adapter is pushed.
CA-HF1000 RET1 The RET SEL switch is set to CH4 and the RET1 switch
of Buildup adapter is pushed.
RET CH4
CA-HF1000 RET2 The RET SEL switch is set to CH4 and the RET2 switch
of Buildup adapter is pushed.
Electric Filter operation
The camera head has ND and CC filters. The selected switch’ s LED light. The ND and CC filter in the rear panel of the Buildup Adapter normally does not work unless given control from the RCU or SCU
(CTLHEAD or FILTER HEAD). < HD CAMERA SK-HD1000 >
CAP 1 2 3 4 - ND Filer position Filter display CAP CLEAR CROSS 1/16ND 1/64ND
A B C D E F CC Filer position Filter display 3200K 4300K 5600K 6300K 8000K -
3
EXTENDER SWITCH OPERATION
THE X2 extender can be changed with the EXTENDER selection switch in the rear panel of the buildup Adapter. (This Extender switch can not control the x2 extender for the portable lens.) The LED light when the x2 extender “ ON” .
FRONT TALLY SEL OPERATION
This has three modes. H : High mode for Red Tally L : Low mode for Red Tally
OFF : No red Tally (Optional tally in the studio type lens has only ON or OFF mode. The tally light at H & L mode.)
FUNC/UP/DOWN/RIGHT/LEFT SWITCH OPERATION
Press the FUNC switch then menu display in the viewfinder. Function in the menu can be selected with the UP/DOWN/RIGH/LEFT switch.
* The camera head menu in addition to the viewfinder menu can be opened when CTL HEAD and it is
self-controlled.
CALL operation
Press the CALL switch, the HEAD, VF, CCU, RU and the SU RED TALLY LED turn on.
4
SA CS-1/CS-2 display switch operation
Press the CS-1/CS-2 switch and VF marker1/2, Focus IND can be changed. Also VF maker level can be adjusted NEGA toPOSI by the LEVEL variable register (VR). The CS-1/CS-2 LED lights when the CS-1/CS-2 is ON.
・SA CS-1/2 Select
・MARKER 1/2 Select
・FOCUS IND
Press the FOCUS IND and the LED light and display 0 to 100 character in the top right of the VF.
CROSS/BOX1/BOXn 2/MEMORY switch operatio
Press the Cross, BOX1 or BOX2 individual switches, then previous position & size memory data are displayed in the view finder. Selected switch LED lights and display level can be adjusted by the LEVEL VR. Individual POSI and SIZE for H/V can be adjusted by the rotary ENC. Adjustable display is last selected data in the CROSS, BOX1 or BOX2. And also adjusted data can be stored to the memory by pressing the Memory switch. The Memory switch LED blinking lights during storing data.
TOP MENU
VF :
■ CUSTOM SW :
CUSTOM SW MENU
CS-1 SW : ZEBRA CA-CS SW : ---------
LENS VTR SW : TALK SA CS-1 SW : MARKER1 SA CS-2 SW : MARKER2
MARKER1 MARKER2 FOCUS IND Select
TOP MENU
VF :
CUSTOM SW :
VF MENU
VF OUT SEL : COLOR VF DETAIL :
VF MARKER : SIDE PANEL : VF DISPLAY : VF ZEBRA :
VF MARKER
USER SEL : USER 1 MARKER1 SEL :
MARKER2 SEL : OTHER SET :
MARKER1 SEL
CENTER MARK : ON SAFETY MARK : ON
SIDE 4:3 : OFF 13:9 : OFF
14:9 : OFF 15:9 : OFF
5
LED INDICATERPOWER
LED The Power LED lights when the camera head power is supplied.
x0.8 LED
The 0.8 LED lights when the lens extender in.
Move the lever to the Lock positionand place the camera on the mount base.
Move the lever to rock the mount base . Adjust and fit of the camera in the bayonetmount with holding the rear side of thecamera, and then press down the lock lever.
Move each of the levers and tothe Unlock position.While pushing the slide release pin ,slide the camera into the bayonet mount.
A
A
B
D
D
C
1 2
5 6 Camera attachment completed
3 4
A
Place the levers and in the Lock
position to stop the vertical and horizontal
movements of the camera, respectively.
Connect the viewfinder to camera.A D
C
A D B
CAMERA ATTACHMENT
STUDIO ADAPTER SA-1000(Box type lens mount)
Remove the view finder from the camera. Push the bayonet mount lever upwardto unlock the camera.
Pull the camera rearward to remove itfrom the bayonet mount.
Pushing the release button .Move the lever to unlock the mount base.
E
1 2
5
3 4
Remove the camera from the mount base.
E
Camera removal completed
CAMERA REMOVAL
STUDIO ADAPTER SA-1000(Box type lens mount)
Align the lugs of the build-up adapter with the lugs of the handy plate.Push the lower part of the handy plate.
Secure the plate by locking the rock screw.(M5 Hexagon wrench)
F G
A
D
1
1
2
2 3 4 Removal completed
Attachment completed
G
Remove the camera lens, and then move
the camera body rearward.
Remove the camera from the mount base. Loose the rock screw. Lightly tap the upper part of the mounting.
plate to disconnect the connector at the
ower part. Then, remove the mounting plate.
F
Lens Mounting Plate Attachment
STUDIO ADAPTER SA-1000(Box type lens mount)
Lens Mounting Plate Removal
STUDIO ADAPTER SA-1000(Box type lens mount)
Move the lever to the Lock positionand place the camera on the mount base.
Move the lever to rock the mount base . Adjust and fit of the camera in the bayonetmount with holding the rear side of thecamera, and then press down the lock lever.
Move each of the levers and tothe Unlock position.While pushing the slide release pin ,slide the camera into the bayonet mount.
A
A
B
D
D
C
1 2
5 6 Camera attachment completed
3 4
A
Place the levers and in the Lock
position to stop the vertical and horizontal
movements of the camera, respectively.
Connect the viewfinder to camera.A D
C
A D B
CAMERA ATTACHMENT
STUDIO ADAPTER SA-1000(Box type lens mount)
Remove the view finder from the camera. Push the bayonet mount lever upwardto unlock the camera.
Pull the camera rearward to remove itfrom the bayonet mount.
Pushing the release button .Move the lever to unlock the mount base.
E
1 2
5
3 4
Remove the camera from the mount base.
E
Camera removal completed
CAMERA REMOVAL
STUDIO ADAPTER SA-1000(Box type lens mount)
Align the lugs of the build-up adapter with the lugs of the handy plate.Push the lower part of the handy plate.
Secure the plate by locking the rock screw.(M5 Hexagon wrench)
F G
A
D
1
1
2
2 3 4 Removal completed
Attachment completed
G
Remove the camera lens, and then move
the camera body rearward.
Remove the camera from the mount base. Loose the rock screw. Lightly tap the upper part of the mounting.
plate to disconnect the connector at the
ower part. Then, remove the mounting plate.
F
Lens Mounting Plate Attachment
STUDIO ADAPTER SA-1000(Box type lens mount)
Lens Mounting Plate Removal
STUDIO ADAPTER SA-1000(Box type lens mount)
top related