subito precision bore gaugesu/sk/sw · 2020-04-23 · 8 subito® vario sv subito® vario system svs...

6

SERIES 100-118

STANDARD VERSION SERIES SU with manufacturer cert if icate

Delivery SU: holder, fixed measuring pins, washers, in wooden box, without dial gauge. Movable contact pin as standard tungsten carbide. Ruby Version SU: Measuring pins and contact pin ruby.Version centring plate coated wear resisting: standard with measuring pins tungsten carbide.

SHORT VERSION SERIES SK with manufacturer cert if icate

Delivery SK: as Series SU, but with a short holder.

ANGLED VERSION SERIES SWDelivery SW: as Series SU, but holder with a fixed angle piece.

FOR MEASURING INTERNAL DIAMETERS, APPLICATION RANGE 4,5 - 800 MM

COMBINATION OF SEVERAL COMPLETE SETS with manufacturer cert if icate

to cover large measuring ranges, consisting of 2 and 3 complete measuring instruments in one wooden box, without dial gauge.

SU/SK/SWSUBITO® Precision Bore Gauge

SUBITO® SU 50 - 100

SUBITO® SU/SK/SW

applicationrange [mm]

100 00000101 00000102 00000103 00000104 00002105 00002106 00002107 00002108 00002109 00002110 00002111 00002112 00002113 00002114 00002

----

204 00000205 00000206 00000207 00000208 00000209 00000210 00000211 00000212 00000213 00000214 00000

----

104 00001105 00001106 00001107 00001108 00001109 00001110 00001111 00001112 00001113 00001114 00001

measuring pinssteelCode

SU SK SW

4,5 - 6 6 - 8 8 - 12 12 - 20 18 - 35 35 - 60 50 - 100 50 - 150 100 - 160 100 - 230 160 - 290 160 - 360 280 - 410280 - 510 400 - 800

----

104 00000105 00000106 00000107 00000108 00000109 00000110 00000111 00000112 00000113 00000114 00000

measuring pins tungsten carbide

CodeSU SK SW

centring plate coatedCode

SU SK SW

100 00001101 00001102 00001103 00001104 00003105 00003106 00003107 00003108 00003109 00003110 00003111 00003112 00003113 00003114 00003

200 00000201 00000202 00000203 00000204 00001205 00001206 00001207 00001208 00001209 00001210 00001211 00001212 00001213 00001214 00001

-101 00004102 00004103 00004104 00006105 00006106 00006107 00006108 00006109 00006110 00006111 00006112 00006113 00006114 00076

-101 00005102 00005103 00005104 00007105 00007106 00007107 00007108 00007109 00007110 00007111 00007112 00007113 00007114 00077

SUBITO® with extended measuring range, for spherical diameters, for diameters > 800 mmand for parallel distances on inquiry. SUBITO® direct SD please see page 27.

SUBITO® several complete sets

Please note: you will find our spare part list in our download-center on our homepage www.schwenk-lmt.de

SUBITO® SU

applicationrange[mm]

115 00006116 00006117 00006118 00006

centring plate coatedCode

115 00002116 00002117 00002118 00002

measuring pin carbideCode

measuring pin steelCode

18 - 100 18 - 150 50 - 160 50 - 230

115 00000116 00000117 00000118 00000

115 00004116 00004117 00004118 00004

measuring pinrubyCode

Manufacturer certificate for all SCHWENK measuring gauges see page 32

centring plate coatedCode

SU SK SW

measuring pins rubyCode

SU SK SW

holder

CodeSU SK

-201 00002202 00002203 00002204 00003205 00003206 00003207 00003208 00003209 00003210 00003211 00003212 00003213 00003214 00003

-101 00002102 00002103 00002104 00004105 00004106 00004107 00004108 00004109 00004110 00004111 00004112 00004113 00004114 00004

-101 00003102 00003103 00003104 00005105 00005106 00005107 00005108 00005109 00005110 00005111 00005112 00005113 00005114 00005

-201 00001202 00001203 00001204 00002205 00002206 00002207 00002208 00002209 00002210 00002211 00002212 00002213 00002214 00002

100 00049101 00045102 00046103 00055104 00067105 00062106 00077106 00077108 00064108 00064110 00044110 00044112 00068112 00068114 00060

100 00050101 00046102 00047103 00056104 00068105 00063106 00078106 00078108 00065108 00065110 00045110 00045112 00069112 00069114 00061

SUBITO® SW

SERIES 120

suitable from diameter 35 mm

Measuring depth extensionFOR SUBITO® BORE GAUGES, PLUG-IN EXTENSION, CLAMPING SHANK Ø 8 MM

MTV

measuring depth extension MTV

MEASURING DEPTH EXTENSION MTV

tube-Ø [mm]

length [mm]

tube-Ø [mm]

Codelength [mm]

Code

100015002000

181818

120 00000120 00001120 00002120 00003

12121212

250500750

1000

120 00004120 00005120 00006on inquiryspecial length

Measuring depth extensions with CFK tube on inquiry.

SUBITO® holder

SUBITO® SU 4,5 - 6 and SU 35 - 60

SUBITO® segment

7

8

SUBITO® Vario SV

SUBITO® Vario System SVS

SERIES 122-124

Delivery SV: SUBITO® Vario SV modular system consisting of one upper part and different measuring heads in Vario design; with fixed measuring pins, washers, in wooden box, without dial gauge.

SUBITO® Vario Precision Bore GaugeFOR MEASURING INTERNAL DIAMETERS, APPLICATION RANGE 6 - 800 MM

SV/SVS

SUBITO® VARIO SVS

application range [mm]

measuring headstype SVS

18 - 160

SUBITO®Vario

blind bores

measuring pin

carbideCode

measuring pin steel

Code

123 000013123 00005

18 - 50 50 - 160 20 - 50 50 - 140

122 00000

122 00001122 00002123 00008

123 00009123 00010124 00004

124 00005124 00006

-

--

123 00000

123 00001123 00002124 00000

124 00001124 00002

SUBITO® VARIO SV /SVS

application range [mm]

measuring heads SUBITO® Variotype SV

measuring pin carbide

Code

measuring pin

steelCode

6 - 18

6 - 10 10 - 18 18 - 160

18 - 50 50 - 160 160 - 800

160 - 430 400 - 800

6 - 10 10 - 18 6 - 10 10 - 18 18 - 50 50 - 160 18 - 50 50 - 160 160 - 430 430 - 800 160 - 430 400 - 800

Delivery SVS: as series SV, but with a short upper part and additional blind bores measuring head and measuring slides, an angle piece 90° to reach awkwardly positioned bores and a measure depth extension 192 mm; in wooden box, without dial gauge.

Code

6-18 mmscrew-in-depth extension 250 mm long, tube-Ø 5 mm

18-160 mmscrew-in depth extension 192 mm long, tube-Ø 10 mmscrew-in depth extension 500 mm long, tube-Ø 10 mmscrew-in depth extension 750 mm long, tube-Ø 10 mmscrew-in depth extension 1000 mm long, tube-Ø 10 mm

160-800 mmscrew-in depth extension 485 mm long, tube-Ø 24 mmscrew-in depth extension 1000 mm long, tube-Ø 24 mmscrew-in depth extension CFK 1000 mm long, tube-Ø 24 mmscrew-in depth extension CFK 1500 mm long, tube-Ø 24 mmscrew-in depth extension CFK 2000 mm long, tube-Ø 24 mmscrew-in depth extension CFK 2500 mm long, tube-Ø 24 mm

122 00005

123 00007123 00033123 00034123 00035

124 00003124 00007123 00601 123 00603123 00605123 00604

ACCESSORIES SV/SVS

application range [mm]

screw-in depth extension 250 mm long, tube Ø 5 mm

screw-in measuring depth extension CFK, 1000 mm long, tube Ø 24 mm

9Manufacturer certificate for all SCHWENK measuring gauges see page 32

SERIES 404-416

Delivery RA: holder, fixed measuring pins in steel, washers, in wooden box, without dial gauge.

RABITO Precision Bore GaugeFOR MEASURING INTERNAL DIAMETERS, APPLI-CATION RANGE 18 - 300 MM

RA

RABITO RA

application range[mm]

Code

404 00001405 00001407 00001416 00001410 00001

18 - 35 35 - 60 50 - 150 18 - 150* 150 - 300

* consists of 2 complete sets in wooden boxRABITO 50-150

Delivery SSV: 1 short upper part, 2 blind bores measuring heads, measuring slides, in wooden box, without dial gauge.

SUBITO® SS for blind bores

front distance h for SUBITO® SS

s: travelD: diameter to be measuredh: front distance

ØD

h

S

SERIES 140-146

Delivery SS: holder, measuring slides and contact pin tungsten carbide as standard, in wooden box, without dial gauge. Version with h = 1 mm: for measuring very close of the bottom of the bore.

SUBITO® Precision Bore GaugeFOR MEASURING OF BLIND BORE DIAMETERS

SS/SSV

SUBITO® SS

application range [mm]

140 00024141 00024142 00027142 00027144 00032144 00032145 00105

holderSS

Code

140 00001141 00001142 00001143 00001144 00001145 00001145 00101

meas. slidesrubyCode

meas. slides carbideCode

front distanceh

[mm]

20 - 50 20 - 60 50 - 110 50 - 140 110 - 300 110 - 400300 - 600

20 - 50 20 - 60 50 - 110 50 - 140 110 - 300110 - 400 300 - 600

1,51,51,51,52,02,02,0

1,01,01,01,01,01,01,0

SUBITO® BLINDE BORES VARIO SSV

applicationrange [mm]

146 00001

meas. slide rubyCode

146 00000146 00002

meas. slide carbideCode

front distanceh

[mm]

20 - 140 20 - 140

1,51,0

140 00000141 00000142 00000143 00000144 00000145 00000145 00100

140 00002141 00002142 00002143 00002144 00002145 00002145 00102

10

SERIES 230-244

Delivery SMT: as Series SU, but holder in special length; fixed measuring pins and movable contact pin tungsten carbide tipped as standard, coated centering plate, in wooden box or transportation box, without dial gauge. Larger and intermediate depth on inquiry.

SUBITO® Precision Bore GaugeFOR MEASURING INTERNAL DIAMETERS IN LARGE DEPTH

SMT

SERIES 130-133

For the use with an electronic length measuring probe and indicating unit; measuring depths up to 12 m are possible. A complete instrument consists of: measuring head, connecting tube (1000 mm) with cardan joint, length measuring probe, extensions if necessary. Delivery in transportation box, without length measuring probe, without indicating unit.

SUBITO® Precision Bore GaugeFOR MEASURING DEEP BORES

SE

SUBITO® SMT

applicationrange [mm]

1.000Code

750Code

500Code

250Code

4,5 - 6 6 - 8 8 - 12 12 - 20 18 - 35 35 - 60 50 - 100 50 - 150 100 - 160 100 - 230 160 - 290 160 - 360280 - 410280 - 510

230 00000231 00000232 00000233 00000234 00000235 00000236 00000237 00000

------

measuring depth [mm]

-231 00001232 00001233 00001234 00001235 00001236 00001237 00001238 00001239 00001240 00001241 00001242 00001243 00001

-231 00002232 00002233 00002234 00002235 00002236 00002237 00002238 00002239 00002240 00002241 00002242 00002243 00002

-231 00003232 00003233 00003234 00003235 00003236 00003237 00003238 00003239 00003240 00003241 00003242 00003243 00003

SMT, SU, SK

applicationrange [mm]

2.000Code

1.250Code

18 - 35 35 - 60 50 - 100 50 - 150 100 - 160 100 - 230 160 - 290 160 - 360 280 - 410 280 - 510

234 00004235 00004236 00004237 00004238 00004239 00004240 00004241 00004242 00004243 00004

measuring depth [mm]

-235 00005236 00005237 00005238 00005239 00005240 00005241 00005242 00005243 00005

-235 00006236 00006237 00006238 00006239 00006240 00006241 00006242 00006243 00006

2.500Code

-235 00007236 00007237 00007238 00007239 00007240 00007241 00007242 00007243 00007

3.000Code

-235 00008236 00008237 00008238 00008239 00008240 00008241 00008242 00008243 00008

1.500Code

SUBITO® SE for deep bores up to 12 m depth

SUBITO® SE

application range [mm]

Code

130 00000131 00000/01

132 00000auf Anfrage

35 - 60 50 - 90/(120) * 100 - 230 > 200

* measuring range extension up to Ø 120 mm/160 mm on request.

SERIES 160-164

Delivery KT: holder with contact pin and exchangeable measuring inserts; contact pin and measuring inserts with inside thread to screw in ball inserts; in wooden box, ball inserts to be ordered separately. Measuring gauges for internal gears from diameter > 8 mm based on OSIMESS on inquiry.

SUBITO® Precision Bore GaugeFOR MEASURING THE TWO-BALL DIMENSION OF TOOTHINGS

Manufacturer certificate for all SCHWENK measuring gauges see page 32

SUBITO® KT with measuring inserts and ball inserts

KT

SUBITO® KT

application range M[mm]

8 - 12 12 - 22 22 - 55 55 - 250 100 - 510

160 00000161 00000162 00000163 00000164 00000

Code

KT 12KT 22KT 55KT 250KT 510

ACCESSORIES KT

application range M[mm] Codethread

* Ball inserts with standard ball diameter < 10 mm according to our tungsten carbide ball list on page 30. Ball inserts with tungsten carbide ball diameter < 0,8 mm and > 10 mm on inquiry.

1 set ball inserts with tungsten carbide balls of your

choice*; ball-Ø d over 0,8 up to 2 mm

(1 x measuring pin, 1 x ball insert)

as above however with intermediate dimension

1 set ball inserts with tungsten carbide balls of your

choice*; ball-Ø d over 0,8 up to 4 mm

as above however with intermediate dimension

1 set ball inserts with tungsten carbide balls of your

choice*; up to ball-Ø d 7 mm

as above however with intermediate dimension

1 set ball inserts with tungsten carbide balls of your

choice*; ball-Ø d over 7 up to 10 mm

as above however with intermediate dimension

reducing socket for the use of ball inserts

KT 22 in KT 55

1 set ball inserts with tungsten carbide balls of your

choice*; up to ball-Ø d 7 mm

as above however with intermediate dimension

1 set ball inserts with tungsten carbide balls of your

choice*; ball-Ø d over 7 up to 10 mm

as above however with intermediate dimension

reducing socket for the use of ball inserts

KT 55 in KT 250/510

M 1,6

M 1,6

M 2,5

M1,6/M2,5

M 4

M4/M 2,5

160 00001

160 00101161 00001

161 00101162 00001

162 00101162 00003

162 00103162 00032

163 00001

163 00101163 00003

163 00103162 00004

KT 12

KT 22

KT 55

KT 250/510

SUBITO® KT - dimensions

even number of teeth

odd number ot teeth

Ød

k

M

E

Splined Plug Gauge

Splined Plug Gauge

FOR MEASURING THE DIAMETRAL TWO-BALL DIMENSIONIN THE RANGE M (DISTANCE BETWEEN BALLS) 12 - 100 MM - MEASURING WITHOUT TIPPING OF THE GAUGE.

- fully toothed design. - plain design with positioning pin. on inquiry

11

12

SERIES 165-167

Holder with retraction for measuring recesses with groove width from 3 mm; in wooden box, without dial gauge. Delivery with one measuring pin for the required diameter within the application range.

SUBITO® Precision Bore GaugeFOR MEASURING GROOVES AND RECESSES

SN

SUBITO® SN

application range [mm]

Coderetraction

[mm]

165 00000166 00000167 00000

8,523 30

60 - 120 120 - 180 180 - 300

SUBITO® SN for grooves and recesses

SERIES 170-176

with 180° rotable fixed measuring pin; in wooden box, without dial gauge.

SUBITO® Precision Bore GaugeFOR MEASURING PILLOW BLOCK HOUSINGS, INTERNAL GROOVES AND RECESSES

ST

SUBITO® ST with fixed measuring pin turned in

applicationrange [mm]

meas. depth200

[mm]

30 - 52 50 - 70 60 - 100 80 - 150 120 - 220 180 - 360 290 - 530

170 00000171 00000172 00000173 00000174 00000175 00000176 00000

170 00001171 00001172 00001173 00001

---

meas. depth400

[mm]

170 00002171 00002172 00002173 00002174 00002175 00002176 00002

meas. depth750

[mm]

170 00003171 00003172 00003173 00003174 00003175 00003176 00003

standardmeasuring

depth

SUBITO® ST

ST 52ST 70ST 100ST 150ST 220ST 360ST 530

Complete set consists of basic unit and expanding probe ON, ONM (additionally with measuring slides); retraction travel up to 10 mm (stan dard); up to 20 mm from Ø 40 mm possible; delivery in wooden box, without expanding probe and dial gauge.expanding probe ON: probe with determined range of application.expanding probe ONM: probe with flexible range of application through movable slides, which have to be ordered separately.

Precision Bore Gauge FOR MEASURING GROOVES AND RECESSES

ON/ONM

BASIC UNIT ON / ONM

Code

190 00000190 00042

holder for expanding probe ON and ONMfor Ø 6 - 55 mmfrom Ø 20 mm** with stronger spring

SERIES 190

ON / ONM basic unit with expanding probe ON, ONM and measuring slides