subject index note: links not active in this version
Post on 03-Jan-2017
222 Views
Preview:
TRANSCRIPT
SUBJECT INDEXNOTE: LINKS NOT ACTIVE IN THIS VERSION
Papers are listed by both Primary and Secondary INCE Subject Classification
Each paper is listed twice – once under primary and once under secondary classification
Select the paper number (nc13_xxx) to link to paper
00 GENERAL
01 International INCE nc13_186 INCE/USA student awards and activities - Past, present and future Steve Sorenson
05 Publications
nc13_195 Presenting a paper at an INCE conference J. Stuart Bolton, Courtney B. Burroughs, Paul R. Donavan and Christopher W.
Menge
06 History and Philosophy
nc13_186 INCE/USA student awards and activities - Past, present and future Steve Sorenson
07 Education
nc13_180 A dual-level integrated course in vibration and acoustics for noise control education M.G. Prasad nc13_195 Presenting a paper at an INCE conference J. Stuart Bolton, Courtney B. Burroughs, Paul R. Donavan and Christopher W.
Menge 08 Noise Programs
nc13_194 Noise control strategies: Lessons from Safe-in-Sound Excellence in Hearing Loss
Prevention AwardsTM
Deanna K. Meinke, Thais C. Morata and Charles Hayden nc13_113 Buy-Quiet Roadmap: A web-based application supporting procurement of low-noise
equipment in the context of a hearing conservation program Beth Cooper, David A. Nelson and Amy Gelfand nc13_180 A dual-level integrated course in vibration and acoustics for noise control education M.G. Prasad nc13_166 Using public input to develop scientifically sound noise pollution policy for Vermont's
rural land uses and communities: Methodology and initial results Eddie Duncan
10 EMISSION: NOISE SOURCES
nc13_113 Buy-Quiet Roadmap: A web-based application supporting procurement of low-noise equipment in the context of a hearing conservation program
Beth Cooper, David A. Nelson and Amy Gelfand
11 Noise-Generating Devices
11.4 Air-moving and distribution devices
nc13_48 Development of a test appartus to determine optimal fan configurations for haul trucks and LHDs
J. Shawn Peterson, M. Jenae Lowe, David Yantek and Lynn Alcorn nc13_128 Extending noise- and power-optimized fan selection into the sound quality domain
using iso-acoustic and iso-power methods David Nelson nc13_173 Computational aeroacoustic modeling of open fan and comparison of predicted and
experimental noise fields Sitae Kim, Yaying Niu and Yong-Joe Kim nc13_121 Notebook fan noise user study Eric Baugh, Marco Beltman and Rina Doherty nc13_55 Laboratory evaluation of noise and airflow for haul truck fans David S. Yantek and J. Shawn Peterson nc13_204 Testing of fans with microperforated housings Seungkyu Lee and J. Stuart Bolton nc13_97 Effect of inlet guide vanes on centrifugal compressor acoustics Neil Figurella, Rick Dehner, Ahmet Selamet, Kevin Tallio, Keith Miazgowicz,
Robert Wade, Ahsanul Karim, Philip Keller and Michael Becker
11.5 Electric power devices
nc13_12 Acoustic comparison of a hybrid-electric and an internal combustion Snowmobile Jared Giesbrecht, David Kuyek and Simon Ouellette
11.6 Other power devices
nc13_97 Effect of inlet guide vanes on centrifugal compressor acoustics Neil Figurella, Rick Dehner, Ahmet Selamet, Kevin Tallio, Keith Miazgowicz,
Robert Wade, Ahsanul Karim, Philip Keller and Michael Becker nc13_129 Noise control for a natural gas compressor station with reciprocating and centrifugal
compressors Timothy G. Simmons
nc13_114 Modification of simulated far-field engine noise by changing near field measurement singular values
Michael D. Hayward, Brandon M. Sobecki, J. Stuart Bolton and Patricia Davies nc13_8 Improving predictions of gas turbine exhaust silencer performance James Hill, Colin Malecki, Paul Williams and Ray Kirby
11.7 Rolling contact noise sources
nc13_107 Generation mechanisms of tire-pavement noise Tyler P. Dare and Robert J. Bernhard nc13_159 System-wide OBSI study to evaluate success of diamond grinding to attain project
noise reduction goal J. Eric Cox and Christopher W. Menge nc13_200 Effect of rotation on the natural frequencies of coupled tire structural-acoustic modes Rui Cao and J. Stuart Bolton nc13_196 An update on the Arizona Quiet Pavement Pilot Program through year eight Paul R. Donavan and Carrie Janello
12 Stationary Noise Sources
nc13_46 Community based social marketing process to define measures for low noise behavior with outdoor machinery
Sebastian Wschiansky, Maja Fischer and Stephanie Moser
12.1 Large equipment
nc13_62 Design of a noise abatement system for optimized performance of an industrial condensing cooling tower
Mervyn Choy, Amir Golpaygan, Chris Hugh and Joseph Lasowski
12.2 Construction and demolition equipment
nc13_103 Rugged coulomb friction jackhammer moil point chisel noise damper Henry A. Scarton, Kyle R. Wilt and Christopher T. Wall
12.3 Computers and business equipment
nc13_9 Revision of ISO 9296 - International rules for declaration of IT equipment noise emissions embark upon new era
Ikuo Kimizuka nc13_23 Technical issues of the qualification method of the inverse square law characteristics
for sound power determination of IT equipment Ikuo Kimzuka, Masaki Suzuki, Akio Takanashi, Kouji Tanaka and Kohei Shimoda nc13_44 Considerations for improving the efficiency of daily calibration work of multi-channel
simultaneous measurement system for sound power level determination Kohei Shimoda, Ikuo Kimizuka, Shigeru Tashiro and Kouji Tanaka
nc13_121 Notebook fan noise user study Eric Baugh, Marco Beltman and Rina Doherty nc13_60 Holographic visualization of sound radiation from computer hard drives Yong Thung Cho and J. Stuart Bolton
12.4 Home appliances and small equipment
nc13_155 Development of a tuned vibro-acoustic absorber for a clothes washer application Kevin Herreman and Crystal Young nc13_157 Statistical energy analysis model of a dishwasher Kevin Herreman nc13_158 Value of a sound rating for dishwashers Kevin Herreman and Crystal Young nc13_161 Product Noise Rating (PNR) as applied to dishwashers: A test case Crystal Young and Kevin Herreman nc13_208 Vibro-acoustic source characterization of the tub in a washing machine Jeong-Guon Ih, Agustinus Oey, Yong-Ho Heo and Kyung-Seop Hong
12.5 Power tools
nc13_47 Design and evaluation of noise control measures for a pneumatic nail gun Vignesh Jayakumar, Andrew Hubbard, George Schneider, Stephen Louie and Edward
Zechmann nc13_117 The air-arc interaction in air carbon arc gouging M. Jenae Lowe and Jessie J. Mechling nc13_120 Comparison of laboratory measurements of noise from constant voltage and constant
current air carbon arcing M. Jenae Lowe and Kevin C. Schuster
13 Moving Noise Sources
13.1 Aircraft
nc13_25 Incorporating real atmospheres into aviation noise models using meteorological data from the AERMOD atmospheric dispersion model
Rachel Romond and Victor W. Sparrow nc13_30 Modeling of ground reflection effects in aircraft flyover noise synthesis Michael Arntzen, Jeroen Sijl and Dick G. Simons nc13_31 Acoustic ray tracing parallelization Michael Arntzen, Jie Shen, Ana Lucia Varbanescu, Henk Sips and Dick G. Simons nc13_43 Auralization architectures for NASA's next generation aircraft noise prediction
program Stephen A. Rizzi, Leonard V. Lopes, Casey L. Burley and Aric R. Aumann nc13_45 A comparative analysis of the subjective assessment of standard and noise abatement
aircraft procedures Abhishek Sahai and Eike Stumpf
nc13_53 Verification of aircraft acoustic source data for the Aviation Environmental Design Tool
Eric Boeker and Amanda Rapoza nc13_74 Practical aircraft simulation noise modeling Troy D. Schultz, Joseph J. Czech and Kenneth J. Plotkin nc13_187 Refinement of an ECG-based approach for detecting awakenings in a study on
aircraft noise-induced sleep disturbance Sarah McGuire and Mathias Basner nc13_11 A simplified approach to simulating sonic booms indoors Clothilde Giacomoni and Patricia Davies nc13_50 Simulator study of indoor annoyance caused by shaped sonic boom stimuli with and
without rattle augmentation Jonathan Rathsam, Alexandra Loubeau and Jacob Klos nc13_3 A preliminary test conducted to understand perceptual characteristics of rotorcraft
noise Andrew McMullen, Patricia Davies and Selen Okcu nc13_141 Application of a broadband active vibration control system to a helicopter trim panel Randolph H. Cabell, Noah H. Schiller and Frank Simon nc13_147 Sound synthesis approach for noise annoyance assessment of rotorcraft operations D. Sabbatini, S. Hartjes, H.G. Visser, M. Gennaretti, G. Bernardini and K. Janssens nc13_148 Acoustical holography imaging of full-scale jet noise fields Alan T. Wall, Kent L. Gee, Tracianne B. Neilsen and Michael M. James nc13_149 Acoustical holography and proper orthogonal decomposition methods for the
analysis of military jet noise Alan T. Wall, Kent L. Gee, Tracianne B. Neilsen and Michael M. James nc13_198 Psychoacoustic analysis of synthesized jet noise Selen Okcu, Jonathan Rathsam and Stephen A. Rizzi nc13_167 Vibroacoustic tailoring of a fuselage panel with multidisciplinary considerations Albert Allen and Adam Przekop
13.2 Highway vehicles
nc13_10 Evaluation of a heavy equipment cab interior sound field and implications on modeling
David C. Copley nc13_64 Influence of car body noise attenuation ability on traffic sound perception and driving
safety Ranran Ding and Yu Du nc13_81 A case study on development of a porous ducted air induction system solution for a
new Chrysler vehicle Rakesh Khurana and Weiguo Zhang nc13_83 Using sound enhancement techniques to define and refine vehicle interior sound
image/quality Rakesh Khurana, Jeffrey Orzechowski, Francois Orange, Patrick Boussard and
Dennis Sulisz
nc13_139 Vehicle design for robust driveline NVH due to imbalance and runout: A Case study Omar Shubailat, Roger King, Mohamad Qatu and Youssef Hammi nc13_145 Time-domain ASQ method for pass-by noise engineering K. Janssens and F. Bianciardi nc13_191 An evaluation of aerodynamic noise produced by car side mirrors Wagner Duarte Machado and Eduardo Bauzer Medeiros
13.3 Off-road vehicles
nc13_12 Acoustic comparison of a hybrid-electric and an internal combustion Snowmobile Jared Giesbrecht, David Kuyek and Simon Ouellette
13.4 Railbound vehicles
nc13_56 Noise and vibration measurements for the DCTA Stadler DMU David A. Towers, Timothy M. Johnson and Scott S. Edwards
13.7 Large engine-powered mobile equipment
nc13_110 Noise source identification on a stageloader system Hugo E. Camargo, David S. Yantek, Robert Randolph, Kyle Schwartz, Patricio
Ravetta and Ricardo Burdisso nc13_137 Experimental vibro-acoustic analysis for troubleshooting compactor cab booming
noise Hongan Xu, John Wang, Owen Dickinson and Hyunseok Kang nc13_42 Vibration and noise monitoring activities in the construction industry: How
communication technologies help offering efficient services Daniel Vaucher De La Croix, Erik Aflalo and Christian Frénéat
13.9 Spacecraft
nc13_111 Analysis of launch abort system vent noise in Orion spacecraft Indranil Dandaroy
14 Specialized Industrial Machinery and Equipment
14.1 Machinery used in manufacturing industries
nc13_129 Noise control for a natural gas compressor station with reciprocating and centrifugal compressors
Timothy G. Simmons
14.3 Mining and quarrying equipment
nc13_132 Some practical aspects of noise control at a coal handling plant Marek L. Szary, Manoj K. Mohanty, Joseph C. Hirschi and Peter L. Weber
nc13_117 The air-arc interaction in air carbon arc gouging M. Jenae Lowe and Jessie J. Mechling nc13_120 Comparison of laboratory measurements of noise from constant voltage and constant
current air carbon arcing M. Jenae Lowe and Kevin C. Schuster nc13_48 Development of a test appartus to determine optimal fan configurations for haul
trucks and LHDs J. Shawn Peterson, M. Jenae Lowe, David Yantek and Lynn Alcorn nc13_37 Development of elastomeric drill chuck isolators to reduce roof bolting machine
drilling noise David H. Johnson, Robert J. Michael, Shane J. Callaghan and Joshua J. Fontana nc13_54 Sound radiation modeling and correlation of a longwall cutting drum Junyi Yang, Hugo Camargo, David S. Yantek and Bryce Gardner nc13_55 Laboratory evaluation of noise and airflow for haul truck fans David S. Yantek and J. Shawn Peterson nc13_110 Noise source identification on a stageloader system Hugo E. Camargo, David S. Yantek, Robert Randolph, Kyle Schwartz, Patricio
Ravetta and Ricardo Burdisso
14.5 Power generation and transmission
nc13_40 Large-scale calculation of possible locations for specific wind turbines under consideration of noise limits
Fabian Probst, Wolfgang Probst and Bernd Huber nc13_41 Efficient evaluation of wind turbine noise Dejan Arsić, John Huff Jr. and Jakob Putner
20 PHYSICAL PHENOMENA
21 Physical Mechanisms of Noise Generation
nc13_15 Transient, planar, nonlinear acoustical holography for reconstructing acoustic pressure and particle velocity fields
Yaying Niu and Yong-Joe Kim
21.6 Flow noise, aerodynamic sound
nc13_21 Acoustical performance of two commercial windscreens Jerry G. Lilly nc13_111 Analysis of launch abort system vent noise in Orion spacecraft Indranil Dandaroy nc13_202 Study of the effect of grazing flow on the performance of microperforated and
perforated panels Arun Viswanathan and J. Stuart Bolton nc13_174 Acoustical studies on corrugated tubes B. Rajavel and M.G. Prasad
nc13_191 An evaluation of aerodynamic noise produced by car side mirrors Wagner Duarte Machado and Eduardo Bauzer Medeiros nc13_167 Vibroacoustic tailoring of a fuselage panel with multidisciplinary considerations Albert Allen and Adam Przekop nc13_49 Multi-source aeroacoustic noise prediction method Jonathan Christian and Jonathan Scott nc13_28 An improved screening method for addressing flow excited branch resonance in
process piping systems Farhana Lamis, Raj Arjunan and Arindam Ghosh
23 Propagation, Transmission & Scattering of Sound
23.1 Radiating surfaces
nc13_2 Sound radiation properties of complex modes of vibration Oliver Unruh and Michael Sinapius nc13_58 Sound radiation of circularly oscillating spherical and cylindrical shells John Wang and Hongan Xu nc13_54 Sound radiation modeling and correlation of a longwall cutting drum Junyi Yang, Hugo Camargo, David S. Yantek and Bryce Gardner nc13_63 The procedures of mapped radiation mode analysis based near-field acoustic
holography Haijun Wu, Weikang Jiang and Haibin Zhang nc13_114 Modification of simulated far-field engine noise by changing near field measurement
singular values Michael D. Hayward, Brandon M. Sobecki, J. Stuart Bolton and Patricia Davies nc13_116 Sound field reconstruction at high frequencies by using a piece-wise interpolation
method Yangfan Liu and J. Stuart Bolton nc13_122 Advancements toward a high-powered carbon nanotube thin-film loudspeaker Andrew R. Barnard, Timothy A. Brungart, Timothy E. McDevitt, David M. Jenkins
and Brian L. Kline
23.9 Transmission
nc13_123 Numerical study of transmission loss through a slow gas layer adjacent to a plate Noah H. Schiller, Benjamin S. Beck and Adam C. Slagle
24 Sound Propagation in the Atmosphere
nc13_25 Incorporating real atmospheres into aviation noise models using meteorological data
from the AERMOD atmospheric dispersion model Rachel Romond and Victor W. Sparrow nc13_31 Acoustic ray tracing parallelization Michael Arntzen, Jie Shen, Ana Lucia Varbanescu, Henk Sips and Dick G. Simons
24.2 Absorption of sound in air
nc13_57 Effects of relative humidity on environmental noise propagation Gillian Redman
24.3 Effects of fog and precipitation
nc13_14 Experimental study on the convergence behavior of modified FXLMS algorithm for active impact noise control
Guohua Sun, Mingfeng Li and Teik C. Lim
24.6 Meteorological factors; Effects of wind, temperature and humidity
nc13_57 Effects of relative humidity on environmental noise propagation Gillian Redman
24.8 Reflection and absorption at small angles over a ground surface
nc13_30 Modeling of ground reflection effects in aircraft flyover noise synthesis Michael Arntzen, Jeroen Sijl and Dick G. Simons
26 Sound Propagation in Ducts
26.1 General theory of propagation in ducts
nc13_92 Effect of flow on the noise attenuation of a muffler system Tongan Wang, Kristopher Lynch, Tyler Relf and John Maxon nc13_170 The effect of indoor air quality requirements on down-duct noise: HVAC noise
control in a post-fibrous duct liner world David Manley
30 NOISE CONTROL ELEMENTS
nc13_132 Some practical aspects of noise control at a coal handling plant Marek L. Szary, Manoj K. Mohanty, Joseph C. Hirschi and Peter L. Weber
31.1 Barriers and screens, shielding
nc13_185 Use of advanced tools and techniques to resolve an atypical parallel noise barrier
case Paul Burge, John Crawford and Peter Wasko
32 Enclosures for Noise Sources
nc13_151 Enhancing muffler or silencer performance by adding bypass ducts Y. Zhang, D. W. Herrin and T. W. Wu
34 Filters, Mufflers, Silencers and Resonators
nc13_151 Enhancing muffler or silencer performance by adding bypass ducts Y. Zhang, D. W. Herrin and T. W. Wu
34.1 Dissipative type
nc13_8 Improving predictions of gas turbine exhaust silencer performance James Hill, Colin Malecki, Paul Williams and Ray Kirby
34.2 Reactive type
nc13_92 Effect of flow on the noise attenuation of a muffler system Tongan Wang, Kristopher Lynch, Tyler Relf and John Maxon
34.3 Helmholtz resonators
nc13_94 Modified Herschel-Quincke tube for passive duct-borne HVAC noise control Seth M. Harrison
35 Absorptive Materials
nc13_204 Testing of fans with microperforated housings Seungkyu Lee and J. Stuart Bolton
35.1 Mechanisms of absorption – Theory
nc13_65 Selection of appropriate models and implementation of efficient computational strategies for modeling porous materials in a vibro-acoustic context
Jean-Pierre Coyette, David Burd, Erwan Jacq, Gregory Lielens, Benoît Van den Nieuwenhof and Bernard Van Antwerpen
nc13_150 Varying backing cavity depths to achieve broadband absorption using micro-perforated panels
X. Hua, D. W. Herrin and P. Jackson nc13_202 Study of the effect of grazing flow on the performance of microperforated and
perforated panels Arun Viswanathan and J. Stuart Bolton
35.5 Materials for special applications
nc13_196 An update on the Arizona Quiet Pavement Pilot Program through year eight Paul R. Donavan and Carrie Janello nc13_107 Generation mechanisms of tire-pavement noise Tyler P. Dare and Robert J. Bernhard
nc13_159 System-wide OBSI study to evaluate success of diamond grinding to attain project noise reduction goal
J. Eric Cox and Christopher W. Menge
35.6 Perforated facings for absorptive materials
nc13_150 Varying backing cavity depths to achieve broadband absorption using micro-perforated panels
X. Hua, D. W. Herrin and P. Jackson
38.3 Active vibration control for noise reduction
nc13_14 Experimental study on the convergence behavior of modified FXLMS algorithm for active impact noise control
Guohua Sun, Mingfeng Li and Teik C. Lim
38.5 Change of configuration or design for noise control purposes
nc13_79 Efficient analysis of modifications to complex structures for vibration reduction Andrew S. Wixom and J. Gregory McDaniel nc13_169 Acoustic emission monitoring of changes in shape memory polymer under structural
test Emmanuel Ayorinde, Mohammad Al-Zubi, Xin Wu and Feizhong Deng
40 VIBRATION AND SHOCK
41 Characteristics of Sources of Vibration and Shock
nc13_168 A spectro-geometric method for the vibration analysis of built-up structures Shiliang Jiang, Wen L. Li and Tiejun Yang nc13_2 Sound radiation properties of complex modes of vibration Oliver Unruh and Michael Sinapius nc13_139 Vehicle design for robust driveline NVH due to imbalance and runout: A Case study Omar Shubailat, Roger King, Mohamad Qatu and Youssef Hammi nc13_169 Acoustic emission monitoring of changes in shape memory polymer under structural
test Emmanuel Ayorinde, Mohammad Al-Zubi, Xin Wu and Feizhong Deng nc13_193 Protecting historic structures from construction vibration Rob Greene nc13_208 Vibro-acoustic source characterization of the tub in a washing machine Jeong-Guon Ih, Agustinus Oey, Yong-Ho Heo and Kyung-Seop Hong
41.3 Transients and shocks, impacts
nc13_47 Design and evaluation of noise control measures for a pneumatic nail gun Vignesh Jayakumar, Andrew Hubbard, George Schneider, Stephen Louie and Edward
Zechmann
42 Vibrating Surfaces and Structures
nc13_203 Simulation of random response of typical honeycomb panels subjected to a diffuse sound field
Bryce Gardner, Ignatius Vaz and Mohamed Ali Hamdi nc13_26 Measurement and modeling of damping for time-domain structural acoustics
simulations Benjamin Cotté, Augustin Parret-Fréaud and Antoine Chaigne nc13_58 Sound radiation of circularly oscillating spherical and cylindrical shells John Wang and Hongan Xu nc13_125 Near-field structure-borne sound holography: Theory vs. practice Dietmar Greussing
43 Propagation in Structures
nc13_32 Passive control of vibration and sound transmission for vehicle structures via embedded Acoustic Black Holes
S.C. Conlon, F. Semperlotti and J.B. Fahnline nc13_79 Efficient analysis of modifications to complex structures for vibration reduction Andrew S. Wixom and J. Gregory McDaniel
43.2 Transmission and attenuation in solid structures
nc13_112 Ground-borne vibration control in a building-like structure using multi-positive position feedback
Josué Enríquez-Zárate and Gerardo Silva-Navarro
46 Vibration Isolators and Attenuators
46.2 Vibration isolators
nc13_37 Development of elastomeric drill chuck isolators to reduce roof bolting machine drilling noise
David H. Johnson, Robert J. Michael, Shane J. Callaghan and Joshua J. Fontana
46.4 Active vibration control
nc13_82 Experimental comparison of two active vibration control approaches: Velocity feedback and negative capacitance shunt damping
Benjamin Beck and Noah Schiller
nc13_156 Active control of sinusoidal disturbances using inverse model LMS algorithm Mingfeng Li, Teik C. Lim and Jie Duan nc13_141 Application of a broadband active vibration control system to a helicopter trim panel Randolph H. Cabell, Noah H. Schiller and Frank Simon
47 Vibration-Damping Materials and Structures
nc13_26 Measurement and modeling of damping for time-domain structural acoustics simulations
Benjamin Cotté, Augustin Parret-Fréaud and Antoine Chaigne nc13_32 Passive control of vibration and sound transmission for vehicle structures via
embedded Acoustic Black Holes S.C. Conlon, F. Semperlotti and J.B. Fahnline nc13_103 Rugged coulomb friction jackhammer moil point chisel noise damper Henry A. Scarton, Kyle R. Wilt and Christopher T. Wall
47.4 Dynamic absorbers
nc13_59 Embedded mechanical bandpass filters using acoustic metamaterial waveguides coupled by cavity modes
Hongfei Zhu and Fabio Semperlotti nc13_155 Development of a tuned vibro-acoustic absorber for a clothes washer application Kevin Herreman and Crystal Young
49 Effects of Vibration and Mechanical Shock
49.2 On structures and machines
nc13_35 Finite element analysis of vibro-acoustic response of sandwich plates with corrugated cores subject to airborne excitation
Yibo Wang, Hui Zheng and Zhiping Wei
49.4 In buildings
nc13_4 A simpler and effective method to perform building vibration analyses consistent with FTA's "detailed" method
Erich Thalheimer, Tom Herzog and Jacob Poling nc13_112 Ground-borne vibration control in a building-like structure using multi-positive
position feedback Josué Enríquez-Zárate and Gerardo Silva-Navarro
50 IMMISSION: PHYSICAL ASPECTS OF ENVIRONMENTAL NOISE
51 Building Noise Control
nc13_73 Proceedings in regulating private noise sources in sensitive areas in Germany Christian Fabris nc13_105 Acoustical design of the perception based engineering laboratory at Ray W. Herrick
Laboratories Center for High Performance Buildings Nathan Bryce Sevener nc13_136 Degradation in airborne sound isolation due to structural loading in wood frame
buildings and meeting building code requirements Alicia J. Wagner Larsen
51.1 Sound fields in rooms and enclosed spaces
nc13_29 Acoustics of modern and old museums António P.O. Carvalho, Hélder J.S. Gonçalves and Luísa M.M. Garcia nc13_85 Physics based spatial acoustics in virtual scenes Steven G. Mattson, Michael Williams, Ryan Schneider and Darrel Younk nc13_86 Playback of physics based spatial acoustics to create an immersive environment Steven G. Mattson, Kevin Nelson, Michael Williams and Ryan Helminen nc13_162 Update to Beranek's room volume to room constant figure Jeffrey L. Fullerton nc13_10 Evaluation of a heavy equipment cab interior sound field and implications on
modeling David C. Copley nc13_178 Compatibility of outdoor concerts in urban areas: Planning case study Mark Bliss nc13_72 Acoustical challenges in long term care facilities Zohreh Razavi nc13_127 Consultant and student collaboration on sound level measurements in a hospital Benjamin Davenny, Robert Celmer, Rachel Parlock, Tiffany Stahura, Thomas Kaytt,
Stephen Lindsey nc13_211 A comparison of hospital noise survey results with patient satisfaction scores Kenric Van Wyk, Melinda Miller and Kristen Murphy
51.2 Reduction of noise levels by increased absorption
nc13_162 Update to Beranek's room volume to room constant figure Jeffrey L. Fullerton
51.3 Sound transmission thru windows, doors, walls, ceilings, floors
nc13_6 Noise transmission loss of sandwich composite panels with passive layered control treatments
Sebastian Ghinet, Haisam Osman and Anant Grewal
nc13_33 Comparison of finite element models for residential building walls and low frequency sound transmission
Beom Soo Kim and Victor W. Sparrow nc13_152 High transmission loss glass wall design Isaac Old and Eddie Duncan nc13_104 Speech privacy and single steel stud wall construction John LoVerde and Wayland Dong
51.4 Sound-insulating structures, transmission coefficients and transmission loss
nc13_90 Simulating the variance of Sound Transmission Class ratings from real measurement parameters
Elliot Dick and David Berg nc13_123 Numerical study of transmission loss through a slow gas layer adjacent to a plate Noah H. Schiller, Benjamin S. Beck and Adam C. Slagle
51.5 Flanking and impact transmission
nc13_133 Laboratory measurements of the reduction of various impact noise sources by floor coverings
Jinyun Chung and Bonggyu Cho
51.6 Heating, ventilating and air conditioning
nc13_94 Modified Herschel-Quincke tube for passive duct-borne HVAC noise control Seth M. Harrison nc13_96 Qualification of air-conditioning unit base pan using Weibull analysis Parag H. Mathuria and Richard J. Wood nc13_170 The effect of indoor air quality requirements on down-duct noise: HVAC noise
control in a post-fibrous duct liner world David Manley nc13_62 Design of a noise abatement system for optimized performance of an industrial
condensing cooling tower Mervyn Choy, Amir Golpaygan, Chris Hugh and Joseph Lasowski nc13_81 A case study on development of a porous ducted air induction system solution for a
new Chrysler vehicle Rakesh Khurana and Weiguo Zhang nc13_174 Acoustical studies on corrugated tubes B. Rajavel and M.G. Prasad
51.9 Plumbing and piping noise
nc13_28 An improved screening method for addressing flow excited branch resonance in process piping systems
Farhana Lamis, Raj Arjunan and Arindam Ghosh
nc13_49 Multi-source aeroacoustic noise prediction method Jonathan Christian and Jonathan Scott
52 Community Noise Control
52.1 Community noise levels
nc13_20 Characterization of the "Ranchlands' Hum"'; A Calgary community noise nuisance Michael Smith, Grimika Gupta, Emily Marasco, Marcia Epstein, Richard Patching,
Ken Scott and Spoorthi Nayak, nc13_76 The technical challenges of permitting power distribution and transmission systems
subject to ambient noise degradation standards Patricia Pellerin, Erik Kalapinski, Scott Noel and Tanya Ambrose nc13_118 An ambient noise model for background noise corrections Charles Oppenheimer and Seth Bard nc13_41 Efficient evaluation of wind turbine noise Dejan Arsić, John Huff Jr. and Jakob Putner nc13_53 Verification of aircraft acoustic source data for the Aviation Environmental Design
Tool Eric Boeker and Amanda Rapoza nc13_88 Construction noise control program for the Clinton Combined Sewer Overflow
Tunnel Project Erich Thalheimer, Scott Manchester and Jacob Poling
52.2 Airport noise
nc13_142 Noise-induced sleep disruption among hospitalized patients: Brain-based approaches toward sleeping soundly on noisy nights
Jeffrey M. Ellenbogen
52.3 Road traffic noise
nc13_70 Guideline for monitoring noise from road infrastructures Salvatore Curcuruto, Francesca Sacchetti, Delio Atzori, Rinaldo Betti, Enrico
Lanciotti, Giuseppe Marsico, Enrico Mazzocchi, Stefano Curcio, Maurizio Bassanino, Paola Maggi, Mauro Mussin and Jacopo Fogola
52.4 Rail vehicle noise
nc13_56 Noise and vibration measurements for the DCTA Stadler DMU David A. Towers, Timothy M. Johnson and Scott S. Edwards
52.5 Industrial noise
nc13_153 Noise measurements and regulatory evaluations for three wastewater treatment plants
Jeff D. Szymanski
nc13_144 Limitations of noise ordinances for addressing substation noise Damien Bell nc13_177 Potential effects on soundscape from hydroelectric power Mark Storm
52.6 Construction noise
nc13_88 Construction noise control program for the Clinton Combined Sewer Overflow Tunnel Project
Erich Thalheimer, Scott Manchester and Jacob Poling nc13_134 Assessment of construction noise annoyance by construction machinery Sungchan Lee and Hyemi Lee nc13_68 Identifying noise monitoring locations for efficient compliance monitoring of
construction sites and mines Douglas Manvell
52.7 Sport and recreation areas and events
nc13_38 An indicator for rating environmental quality of urban parks Jan Jabben, Edwin Verheijen and Miriam Weber nc13_178 Compatibility of outdoor concerts in urban areas: Planning case study Mark Bliss nc13_176 Preserving and restoring authentic acoustic environments that will inspire the
American public Kurt Fristrup
53 In-Plant Noise Control
53.1 In-plant noise levels
nc13_84 An empirical method to improve accuracy of in-situ sound power measurements of industrial equipment
Robert S. Johnson, Sr. and Frank H. Brittain
53.2 Exposures of workers
nc13_137 Experimental vibro-acoustic analysis for troubleshooting compactor cab booming noise
Hongan Xu, John Wang, Owen Dickinson and Hyunseok Kang
54 Shipboard and Offshore Platform Noise Control
54.3 Underwater noise
nc13_52 Underwater noise monitoring to predict marine life impacts during ocean floor rock blasting
Peter Guldberg and Ryan Callahan
56 Noise Surveys
56.1 Outdoors
nc13_42 Vibration and noise monitoring activities in the construction industry: How communication technologies help offering efficient services
Daniel Vaucher De La Croix, Erik Aflalo and Christian Frénéat nc13_70 Guideline for monitoring noise from road infrastructures Salvatore Curcuruto, Francesca Sacchetti, Delio Atzori, Rinaldo Betti, Enrico
Lanciotti, Giuseppe Marsico, Enrico Mazzocchi, Stefano Curcio, Maurizio Bassanino, Paola Maggi, Mauro Mussin and Jacopo Fogola
56.2 Indoors
nc13_68 Identifying noise monitoring locations for efficient compliance monitoring of
construction sites and mines Douglas Manvell nc13_127 Consultant and student collaboration on sound level measurements in a hospital Benjamin Davenny, Robert Celmer, Rachel Parlock, Tiffany Stahura, Thomas Kaytt
and Stephen Lindsey nc13_211 A comparison of hospital noise survey results with patient satisfaction scores Kenric Van Wyk, Melinda Miller and Kristen Murphy
56.3 Soundscapes
nc13_177 Potential effects on soundscape from hydroelectric power Mark Storm
60 IMMISION: EFFECTS OF NOISE
61 Perception of Sound
nc13_29 Acoustics of modern and old museums António P.O. Carvalho, Hélder J.S. Gonçalves and Luísa M.M. Garcia nc13_64 Influence of car body noise attenuation ability on traffic sound perception and driving
safety Ranran Ding and Yu Du
nc13_86 Playback of physics based spatial acoustics to create an immersive environment Steven G. Mattson, Kevin Nelson, Michael Williams and Ryan Helminen nc13_164 Understanding and preserving quiet areas Nicholas P. Miller nc13_175 Identifying varying preferences in a paired comparison jury study using unsupervised
clustering techniques Glenn Pietila and Teik C. Lim
61.2 Theories of hearing
nc13_71 Accounting for the absolute threshold of hearing when analyzing low level sound Menachem Rafaelof
61.3 Hearing levels and hearing thresholds of populations
nc13_71 Accounting for the absolute threshold of hearing when analyzing low level sound Menachem Rafaelof
62 Psychological Effects
62.3 Hearing conservation programs
nc13_194 Noise control strategies: Lessons from Safe-in-Sound Excellence in Hearing Loss Prevention AwardsTM
Deanna K. Meinke, Thais C. Morata and Charles Hayden
62.5 Effects of noise on health
nc13_20 Characterization of the "Ranchlands' Hum"'; A Calgary community noise nuisance Michael Smith, Grimika Gupta, Emily Marasco, Marcia Epstein, Richard Patching,
Ken Scott and Spoorthi Nayak
63 Psychological Effects
nc13_164 Understanding and preserving quiet areas Nicholas P. Miller nc13_72 Acoustical challenges in long term care facilities Zohreh Razavi nc13_198 Psychoacoustic analysis of synthesized jet noise Selen Okcu, Jonathan Rathsam and Stephen A. Rizzi
63.2 Perceived noisiness, annoyance
nc13_3 A preliminary test conducted to understand perceptual characteristics of rotorcraft noise
Andrew McMullen, Patricia Davies and Selen Okcu nc13_45 A comparative analysis of the subjective assessment of standard and noise abatement
aircraft procedures Abhishek Sahai and Eike Stumpf nc13_50 Simulator study of indoor annoyance caused by shaped sonic boom stimuli with and
without rattle augmentation Jonathan Rathsam, Alexandra Loubeau and Jacob Klos nc13_76 The technical challenges of permitting power distribution and transmission systems
subject to ambient noise degradation standards Patricia Pellerin, Erik Kalapinski, Scott Noel and Tanya Ambrose nc13_134 Assessment of construction noise annoyance by construction machinery Sungchan Lee and Hyemi Lee nc13_147 Sound synthesis approach for noise annoyance assessment of rotorcraft operations D. Sabbatini, S. Hartjes, H.G. Visser, M. Gennaretti, G. Bernardini and K. Janssens
63.3 Speech intelligibility and interference, speech levels, speech communication
nc13_104 Speech privacy and single steel stud wall construction John LoVerde and Wayland Dong nc13_102 Evaluating anthropogenic noise effects on animal communication Robert J. Dooling, Sandra H. Blumenrath, Ed Smith and Kurt Fristrup
63.4 Sleep disturbance
nc13_142 Noise-induced sleep disruption among hospitalized patients: Brain-based approaches toward sleeping soundly on noisy nights
Jeffrey M. Ellenbogen nc13_187 Refinement of an ECG-based approach for detecting awakenings in a study on
aircraft noise-induced sleep disturbance Sarah McGuire and Mathias Basner
63.7 Sound quality
nc13_175 Identifying varying preferences in a paired comparison jury study using unsupervised clustering techniques
Glenn Pietila and Teik C. Lim nc13_176 Preserving and restoring authentic acoustic environments that will inspire the
American public Kurt Fristrup nc13_38 An indicator for rating environmental quality of urban parks Jan Jabben, Edwin Verheijen and Miriam Weber
nc13_83 Using sound enhancement techniques to define and refine vehicle interior sound image/quality
Rakesh Khurana, Jeffrey Orzechowski, Francois Orange, Patrick Boussard and Dennis Sulisz
nc13_128 Extending noise- and power-optimized fan selection into the sound quality domain using iso-acoustic and iso-power methods
David Nelson
65 Effects of Noise on Domesticated and Wild Animals
nc13_102 Evaluating anthropogenic noise effects on animal communication Robert J. Dooling, Sandra H. Blumenrath, Ed Smith and Kurt Fristrup
65.2 Wildlife
nc13_52 Underwater noise monitoring to predict marine life impacts during ocean floor rock blasting
Peter Guldberg and Ryan Callahan
69 Criteria and Rating of Noise
nc13_158 Value of a sound rating for dishwashers Kevin Herreman and Crystal Young nc13_161 Product Noise Rating (PNR) as applied to dishwashers: A test case Crystal Young and Kevin Herreman
70 ANALYSIS
71 Instruments for Noise and Vibration Measurement
nc13_135 Improving the quality of noise measurements Carsten Thomsen
71.1 Transducers
nc13_16 Recovery of the free sound field using particle velocity measurements Chuan-Xing Bi, Ding-Yu Hu and Yong-Bin Zhang nc13_21 Acoustical performance of two commercial windscreens Jerry G. Lilly nc13_199 Using the concept of constant divergence of the sound pressure level for determining
the free-field sensitivity of microphones by comparison Valentin Buzduga nc13_122 Advancements toward a high-powered carbon nanotube thin-film loudspeaker Andrew R. Barnard, Timothy A. Brungart, Timothy E. McDevitt, David M. Jenkins
and Brian L. Kline
nc13_199 Using the concept of constant divergence of the sound pressure level for determining the free-field sensitivity of microphones by comparison
Valentin Buzduga
72 Measurement Techniques
nc13_16 Recovery of the free sound field using particle velocity measurements Chuan-Xing Bi, Ding-Yu Hu and Yong-Bin Zhang nc13_39 Multi-function, multi-point measurement system including data recorder and
frequency analyser based on a dedicated computer and a multi-channel wireless sensor
Yasutaka Nakajima, Kenji Shinohara, Tetsuya Ozaki, Kiyokatsu Iwahashi, Yu Kurosawa, Yuichi Yonemoto, Toshihiro Ueta, Naru Sato, Daisuke Sakaue and Masaharu Ohya
nc13_135 Improving the quality of noise measurements Carsten Thomsen nc13_145 Time-domain ASQ method for pass-by noise engineering K. Janssens and F. Bianciardi nc13_185 Use of advanced tools and techniques to resolve an atypical parallel noise barrier
case Paul Burge, John Crawford and Peter Wasko
72.2 Vibration level
nc13_4 A simpler and effective method to perform building vibration analyses consistent with FTA's "detailed" method
Erich Thalheimer, Tom Herzog and Jacob Poling
72.3 Sound intensity
nc13_206 Imaging contributions to noise measures: The future for simulation tools Steffen Marburg
72.4 Sound power
nc13_23 Technical issues of the qualification method of the inverse square law characteristics for sound power determination of IT equipment
Ikuo Kimzuka, Masaki Suzuki, Akio Takanashi, Kouji Tanaka and Kohei Shimoda nc13_44 Considerations for improving the efficiency of daily calibration work of multi-channel
simultaneous measurement system for sound power level determination Kohei Shimoda, Ikuo Kimizuka, Shigeru Tashiro and Kouji Tanaka
72.5 Transmission loss
nc13_84 An empirical method to improve accuracy of in-situ sound power measurements of industrial equipment
Robert S. Johnson, Sr. and Frank H. Brittain nc13_17 Traditional and angle-dependent evaluation of a reverberant-anechoic transmission
loss suite Paul Bauch and Andrew R. Barnard nc13_133 Laboratory measurements of the reduction of various impact noise sources by floor
coverings Jinyun Chung and Bonggyu Cho nc13_152 High transmission loss glass wall design Isaac Old and Eddie Duncan
73 Test Facilities
nc13_17 Traditional and angle-dependent evaluation of a reverberant-anechoic transmission loss suite
Paul Bauch and Andrew R. Barnard nc13_105 Acoustical design of the perception based engineering laboratory at Ray W. Herrick
Laboratories Center for High Performance Buildings Nathan Bryce Sevener nc13_11 A simplified approach to simulating sonic booms indoors Clothilde Giacomoni and Patricia Davies nc13_43 Auralization architectures for NASA's next generation aircraft noise prediction
program Stephen A. Rizzi, Leonard V. Lopes, Casey L. Burley and Aric R. Aumann nc13_100 Calibration of a long-wavelength acoustic flowmeter using a lumped impedance
acoustic model Lee J. Gorny, Keith A. Gillis and Michael R. Moldover
74 Signal Processing
74.3 Digital processing and simulation
nc13_91 Simplify signal processing comparison with graphical system design Michael Denton and Kurt Veggeberg nc13_82 Experimental comparison of two active vibration control approaches: Velocity
feedback and negative capacitance shunt damping Benjamin Beck and Noah Schiller nc13_156 Active control of sinusoidal disturbances using inverse model LMS algorithm Mingfeng Li, Teik C. Lim and Jie Duan
74.5 Diagnosis and failure prediction
nc13_100 Calibration of a long-wavelength acoustic flowmeter using a lumped impedance acoustic model
Lee J. Gorny, Keith A. Gillis and Michael R. Moldover nc13_160 Time-frequency beamforming for nondestructive evaluations of plate using ultrasonic
Lamb wave Je-Heon Han and Yong-Joe Kim nc13_193 Protecting historic structures from construction vibration Rob Greene nc13_96 Qualification of air-conditioning unit base pan using Weibull analysis Parag H. Mathuria and Richard J. Wood
74.6 Source localization and transmission paths
nc13_69 Developing portable beam-forming device to detect squeak and rattle noise sources Youngkey K. Kim, Seongil Hwang, Jungoo Kang, Kang-Duk Ih and Yang-Hann Kim nc13_206 Imaging contributions to noise measures: The future for simulation tools Steffen Marburg
74.7 Processing by microphone arrays
nc13_39 Multi-function, multi-point measurement system including data recorder and frequency analyser based on a dedicated computer and a multi-channel wireless sensor
Yasutaka Nakajima, Kenji Shinohara, Tetsuya Ozaki, Kiyokatsu Iwahashi, Yu Kurosawa, Yuichi Yonemoto, Toshihiro Ueta, Naru Sato, Daisuke Sakaue and Masaharu Ohya
nc13_69 Developing portable beam-forming device to detect squeak and rattle noise sources Youngkey K. Kim, Seongil Hwang, Jungoo Kang, Kang-Duk Ih and Yang-Hann Kim nc13_160 Time-frequency beamforming for nondestructive evaluations of plate using ultrasonic
Lamb wave Je-Heon Han and Yong-Joe Kim
74.8 Frequency domain and spectral analysis
nc13_91 Simplify signal processing comparison with graphical system design Michael Denton and Kurt Veggeberg
75 Methods of Mathematical Modeling
nc13_168 A spectro-geometric method for the vibration analysis of built-up structures Shiliang Jiang, Wen L. Li and Tiejun Yang nc13_203 Simulation of random response of typical honeycomb panels subjected to a diffuse
sound field Bryce Gardner, Ignatius Vaz and Mohamed Ali Hamdi
75.1 Statistical methods
nc13_118 An ambient noise model for background noise corrections Charles Oppenheimer and Seth Bard
75.2 Statistical energy analysis
nc13_157 Statistical energy analysis model of a dishwasher Kevin Herreman
75.3 Finite element methods
nc13_33 Comparison of finite element models for residential building walls and low frequency sound transmission
Beom Soo Kim and Victor W. Sparrow nc13_35 Finite element analysis of vibro-acoustic response of sandwich plates with corrugated
cores subject to airborne excitation Yibo Wang, Hui Zheng and Zhiping Wei nc13_59 Embedded mechanical bandpass filters using acoustic metamaterial waveguides
coupled by cavity modes Hongfei Zhu and Fabio Semperlotti nc13_65 Selection of appropriate models and implementation of efficient computational
strategies for modeling porous materials in a vibro-acoustic context Jean-Pierre Coyette, David Burd, Erwan Jacq, Gregory Lielens, Benoît Van den
Nieuwenhof and Bernard Van Antwerpen nc13_173 Computational aeroacoustic modeling of open fan and comparison of predicted and
experimental noise fields Sitae Kim, Yaying Niu and Yong-Joe Kim
75.6 Modal analysis
nc13_60 Holographic visualization of sound radiation from computer hard drives Yong Thung Cho and J. Stuart Bolton nc13_200 Effect of rotation on the natural frequencies of coupled tire structural-acoustic modes Rui Cao and J. Stuart Bolton
75.7 Imaging of acoustical and vibrational fields
nc13_15 Transient, planar, nonlinear acoustical holography for reconstructing acoustic pressure and particle velocity fields
Yaying Niu and Yong-Joe Kim nc13_63 The procedures of mapped radiation mode analysis based near-field acoustic
holography Haijun Wu, Weikang Jiang and Haibin Zhang
nc13_116 Sound field reconstruction at high frequencies by using a piece-wise interpolation method
Yangfan Liu and J. Stuart Bolton nc13_125 Near-field structure-borne sound holography: Theory vs. practice Dietmar Greussing nc13_148 Acoustical holography imaging of full-scale jet noise fields Alan T. Wall, Kent L. Gee, Tracianne B. Neilsen and Michael M. James nc13_149 Acoustical holography and proper orthogonal decomposition methods for the
analysis of military jet noise Alan T. Wall, Kent L. Gee, Tracianne B. Neilsen and Michael M. James
75.9 Analytical models
nc13_6 Noise transmission loss of sandwich composite panels with passive layered control treatments
Sebastian Ghinet, Haisam Osman and Anant Grewal
76 Modeling, Prediction and Simulation
76.1 Propagation models, noise levels
nc13_74 Practical aircraft simulation noise modeling Troy D. Schultz, Joseph J. Czech and Kenneth J. Plotkin
76.4 Computer software programs
nc13_85 Physics based spatial acoustics in virtual scenes Steven G. Mattson, Michael Williams, Ryan Schneider and Darrel Younk
77 Sampling, Quality Control Procedures and Measurement Uncertainty
nc13_90 Simulating the variance of Sound Transmission Class ratings from real measurement parameters
Elliot Dick and David Berg
80 REQUIREMENTS
81 Standards nc13_9 Revision of ISO 9296 - International rules for declaration of IT equipment noise
emissions embark upon new era Ikuo Kimizuka
82 National Government Legislation and Regulations
nc13_46 Community based social marketing process to define measures for low noise behavior with outdoor machinery
Sebastian Wschiansky, Maja Fischer and Stephanie Moser nc13_73 Proceedings in regulating private noise sources in sensitive areas in Germany Christian Fabris nc13_153 Noise measurements and regulatory evaluations for three wastewater treatment
plants Jeff D. Szymanski
83 State and Local Legislation and Regulations
nc13_40 Large-scale calculation of possible locations for specific wind turbines under consideration of noise limits
Fabian Probst, Wolfgang Probst and Bernd Huber
85 Ordinances, including Zoning Requirements
nc13_144 Limitations of noise ordinances for addressing substation noise Damien Bell nc13_166 Using public input to develop scientifically sound noise pollution policy for Vermont's
rural land uses and communities: Methodology and initial results Eddie Duncan
86 Building Codes
nc13_136 Degradation in airborne sound isolation due to structural loading in wood frame buildings and meeting building code requirements
Alicia J. Wagner Larsen
top related