sx-up2 installation for windows xp in this guide you will be instructed on how to install the sx-...

SX-UP2 installation for Windows XP

In this guide you will be instructed on how to install the SX-UP2 cable in combination with the Roland EGX-

20

Lode PLessersRoland DG

- Plug in the cable.

After the cable is plugged in , the following messages will appear.

Lode PLessersRoland DG

Lode PlessersRoland DG

Lode PlessersRoland DG

Lode PlessersRoland DG

- EGX-20 driver installation.

The following steps will show you how to install the EGX-20 driver on the correct communication port.

Lode PLessersRoland DG

Lode PlessersRoland DG

Open the “Printer and Faxes” menu

Lode PlessersRoland DG

Add a printer

Lode PlessersRoland DG

Click “Next”

Lode PlessersRoland DG

Click “Next”

Local printer attached to the computer

Lode PlessersRoland DG

Choose the highest USB Port number. Then click Next.

Lode PlessersRoland DG

Click the “Have Disk…” button

Lode PlessersRoland DG

Click the “Browse…” button.Browse to the drivers folder on your CD and select the correct folder for your windows

operation system.

Click “OK”

Lode PlessersRoland DG

Select the Roland EGX-20

Click “Next”

Lode PlessersRoland DG

Click “Next”

Replace existing driver

Lode PlessersRoland DG

Click “Next”

Lode PlessersRoland DG

Choose NO

Click “Next”

Lode PlessersRoland DG

Click “Finish”

Lode PlessersRoland DG

Choose “Continue Anyway”

Lode PlessersRoland DG

The files will be copied to your computer.

Lode PlessersRoland DG

The Roland EGX-20 is added to your printers and can be used

with the SX-UP2 Cable.

Lode PlessersRoland DG

Don’t hesitate to contact us if you need help.

Roland DGsupport@rolanddg.be

+32 14 57 59 11