teaching software - powerpoint presentation on forage ... · teaching software − powerpoint...

Teaching Software − PowerPoint Presentation on Forage Harvesters

Table of ContentsTeaching Software − PowerPoint Presentation on Forage Harvesters........................................................1

Part I − Attachments...............................................................................................................................1Part II − Chopping...................................................................................................................................5Part III − Drives and other features.........................................................................................................9

i

ii

Teaching Software − PowerPoint Presentation on Forage Harvesters

EDUCATION SERVICE

CLAASU.K.

Part I − Attachments

The JAGUAR forage harvester, for universal use with ...

... pick−up

... maize header

... direct−cut attachment

... maize picker

1

Pick−up

The pick−up gathers up swathed crop and feeds it into the intake auger.

Various pick−ups are available in working widths of 3.00 and 3.80 m.

Crop guard and feeler wheels on the pick−up

2

The pick−up follows the ground contours perfectly

CLAAS Contour guides the pick−up at the preselected distance above the ground, both in the direction oftravel and transversely to the direction of travel.

CLAAS Autopilot automatic steering

The maize header can cope with any number of rows

4.50 or 6.00 m working width

The maize header, which works independently of the number of rows, reliably picks up forage maize, evenacross the rows.

3

The maize header in road travel mode

Whole crop harvesting GPS

4

Corn cob mix with Conspeed

The JAGUAR harvests nutritious corn cob mix with the CONSPEED corn picker attachment.

Part II − Chopping

Feed rollers

5

Metal detector

Cutting cylinder

6

Automatic knife sharpener

The automatic knife sharpener ensures the knives are always sharp for even, effortless cutting.

Automatic ledger plate adjustment

After sharpening the knives, the optimum distance between the knives and the ledger plate has to be reset.This can be done manually. With automatic ledger plate adjustment, two linear motors move the ledgerplate towards the knives as the cutting cylinder turns slowly. As soon as the knock sensors register knifecontact, the movement stops and the ledger plate is pulled back a little way (safety distance).

7

Corn cracker

The corn cracker consists of two serrated steel rollers, turning at different speeds. The gap can be sethydraulically from the driver’s seat.

Raising and lowering the corn cracker

When the corn cracker is not in use, it is moved from the shaft to the parking position. For extended periodsof work in grass, the grass shaft is used instead.

8

Straight crop flow

Part III − Drives and other features

Upper discharge chute rotation

9

The upper discharge chute is swung out from the cab. The swing angle is over 190°.

Direct drive from the engine

The chopper unit, being the assembly with the biggest power requirement, is driven directly by thetransversely mounted engine.

Drive concept

10

Ground drive

The JAGUAR has a hydrostatic ground drive with two selectable speed settings. In the setting selected, thespeed is regulated automatically according to the tractive power required.

Engine cooling

Clean cool air is drawn in at the top. It is then blown out through the engine.

11

Field Shuttle

A combination of forage harvester and travelling hopper in various versions or with semitrailer. This enablesvery large transport vehicles to be used, for instance for long−distance haulage to stationary green cropdriers.

The 15,000th JAGUAR rolled off the production line in 1999. This jubilee machine was produced in a speciallivery.

12