technical quiz-1 ec6302 – digital electronics subject handler: u.poornima

TECHNICAL QUIZ-1

EC6302 – DIGITAL ELECTRONICSSUBJECT HANDLER: U.POORNIMA

1. The output of an exclusive-NOR gate is 1. Which input combination is correct?

a. a = 1, b = 0b. a = 0, b = 1c. a = 0, b = 0d. none of the above

2. Before an SOP implementation, the expression would require a total of how many gates?

a. 1b. 2c. 4d. 5

3. A 4-variable AND-OR-Invert circuit produces a 0 at its Y output. Which combination of inputs is correct?

a. b.c. d.

none of the above

4. To implement the expression , it takes one OR gate and how many other gates along with that?

a. Three and gates and three invertersb.Three and gates and four invertersc. Three and gatesd.One and gate

,

5. How many AND gates are required to implement the Boolean expression,

? a.1b.2c.3d.4

6. How many NOT gates are required to implement the Boolean expression,

? a.1b.2c.4d.5

7. The inverter can be produced with how many NAND gates?

a.1b.2c.3d.4

8. A 4-variable AND-OR circuit produces a 0 at its Y output. Which combination of inputs is correct?

a.A = 0, b = 0, c = 1, d = 1b.A = 1, b = 1, c = 0, d = 0c.A = 1, b = 1, c = 1, d = 1d.A = 1, b = 0, c = 1, d = 0

9. A 4-variable AND-OR circuit produces a 1 at its Y output. Which combination of inputs is correct?

a.A = 0, b = 0, c = 0, d = 0b.A = 0, b = 1, c = 1, d = 0c.A = 1, b = 1, c = 0, d = 0d.A = 1, b = 0, c = 0, d = 0

10. Implementation of the Boolean expression results in how many basic gates?

a.Three and gates, one or gateb.Three and gates, one not gate, one or gatec.Three and gates, one not gate d.Three and gates, three or gates three or gates

11. What is the possible output expression for an AND-OR-Invert circuit having one AND gate with inputs A, B, and C and one AND gate with inputs D and E?

a. b.c. d.

12. How many 2-input NOR gates does it take to produce a 2-input NAND gate?

a.1 b.2c.3 d.4

13. How many numbers of gates that a logic circuit contains with an output ?

a.2 and gates, 2 or gates, 2 inverters b.3 and gates, 2 or gates, 1 inverterc.2 and gates, 1 or gate, 2 inverters d.2 and gates, 1 or gate

14. What may be the values of A, B, C, and D that make the sum term equal to zero?

a.A = 1, b = 0, c = 0, d = 0b.A = 1, b = 0, c = 1, d = 0c.A = 0, b = 1, c = 0, d = 0d.A = 1, b = 0, c = 1, d = 1

15. One of De Morgan's theorems states that

. How can we state that logically there is no difference between them?

a. a NOR and an AND gate with inverted inputsb. a NAND and an OR gate with inverted inputsc. an AND and a NOR gate with inverted inputsd. a NOR and a NAND gate with inverted inputs

16. The commutative law of Boolean addition states that A + B = A × B.Is it true?

a.True b.False

17. What will be the outcome, if we apply DeMorgan's theorem to the expression ?

a. b.c. d.

18. How the systematic reduction of logic circuits is accomplished?

a.Using boolean algebrab.Symbolic reductionc.TTL logicd.Using a truth table

19. What will be the gate, if an AND gate with schematic "bubbles" on its inputs?

a.NOTb.ORc.NORd.NAND

20. For the SOP expression , how many 1s are in the truth table's output column?

a.1 b.2c.3 d.5

21. A truth table for the SOP expression has how many input

combinations?a.1 b.2c.4 d.8

22. How many gates would be required to implement the following Boolean expression before simplification? XY + X(X + Z) + Y(X + Z)

a.1 b.2c.4 d.5

23. Determine the values of A, B, C, and D that make the product term equal to 1

a.A = 0, B = 1, C = 0, D = 1b.A = 0, B = 0, C = 0, D = 1c.A = 1, B = 1, C = 1, D = 1d.A = 0, B = 0, C = 1, D = 0

24. What is the primary motivation for using Boolean algebra to simplify logic expressions?

a.It may make it easier to understand the overall function of the circuit.

b.It may reduce the number of gates.c.It may reduce the number of inputs required.d.All of the above

25. AC + ABC = AC. Is it true?a.Trueb.False

26. Which Boolean algebra property allows us to group operands in an expression in any order without affecting the results of the operation [for example, A + B = B + A]?

a.Associativeb.Commutativec.Booleand.Distributive

27. The output of an exclusive-NOR gate is 1. Which input combination is correct?

a.a = 1, b = 0b.a = 0, b = 1c.a = 0, b = 0d.none of the above

28. When grouping cells within a K-map, how the cells must be combined in groups?

a.2sb.1, 2, 4, 8, etc.c.4sd.3s

29. Why the NAND or NOR gates are referred to as "universal" gates?

a.Can be found in almost all digital circuitsb.Can be used to build all the other types of

gatesc.Are used in all countries of the worldd.Were the first gates to be integrated

30. A Karnaugh map is a systematic way of reducing which type of expression?

a.Product-of-sumsb.Exclusive norc.Sum-of-productsd.Those with overbars

31. The Boolean expression is logically equivalent to what single gate?

a.NAND b.NORc.ANDd.OR

32. For the SOP expression , how many 0s are in the truth table's output column?

a.zero b.1c.4 d.5

33. Which statement below best describes a Karnaugh map?

a.A Karnaugh map can be used to replace Boolean rules.

b.The Karnaugh map eliminates the need for using NAND and NOR gates.

c.Variable complements can be eliminated by using Karnaugh maps.

d.Karnaugh maps provide a cookbook approach to simplifying Boolean expressions.

34. Which of the following is an important feature of the sum-of-products (SOP) form of expression?

a.All logic circuits are reduced to nothing more than simple AND and OR gates.

b.The delay times are greatly reduced over other forms.

c.No signal must pass through more than two gates, not including inverters.

d.The maximum number of gates that any signal must pass through is reduced by a factor of two.

35. Which is the gate performs the same function if an OR gate with schematic "bubbles" on its inputs?

a.NORb.ORc.NOTd.NAND

36. The expression W(X + YZ) can be converted to SOP form by applying which law?

a.Associative lawb.Commutative lawc.Distributive lawd.None of the above

37. What the commutative law of addition and multiplication indicates?

a.we can group variables in an AND or in an OR any way we want

b.an expression can be expanded by multiplying term by term just the same as in ordinary algebra

c.the way we OR or AND two variables is unimportant because the result is the same

d.the factoring of Boolean expressions requires the multiplication of product terms that contain like variables

38. Which of the following combinations cannot be combined into K-map groups?

a.Corners in the same rowb.Corners in the same columnc.Diagonald.Overlapping combinations

39. Any number with an exponent of zero is equal to:

a.Zero b.Onec.That numberd.Ten

40. In the decimal numbering system, what is the MSD?

a.The middle digit of a stream of numbersb.The digit to the right of the decimal pointc.The last digit on the rightd.The digit with the most weight

41. What is the requirement of a full subtractor circuit?

a.Two inputs and two outputsb.Two inputs and three outputsc.Three inputs and one outputd.Three inputs and two outputs

42. When the output of an AND gate is LOW?a.all the timeb.when any input is LOWc.when any input is HIGHd.when all inputs are HIGH

43. What is the decimal value of binary 100102?

a.610 b.910

c.1810 d.2010

44. When the output of a NOT gate is HIGH?a.The input is lowb.The input is highc.The input changes from low to highd.Voltage is removed from the gate

45. When the output of an OR gate is LOW?a.all inputs are LOWb.any input is LOWc.any input is HIGHd.all inputs are HIGH

46. A 4-variable AND-OR-Invert circuit produces a 0 at its Y output. Which combination of inputs is correct?

a.b.c.d.none of the above

47. The inverter can be produced with how many NAND gates?

a. 1b. 2c. 3d. 4

48. How many 2-input NOR gates does it take to produce a 2-input NAND gate?

a. 1b. 2c. 3d. 4

49. What is the major difference between half-adders and full-adders?

a. Nothing basically; full-adders are made up of two half-adders.

b. Full adders can handle double-digit numbers.c. Full adders have a carry input capability.d. Half adders can handle only single-digit

numbers.

50. When performing subtraction by addition in the 2's-complement system:

a. the minuend and the subtrahend are both changed to the 2's-complement.

b. the minuend is changed to 2's-complement and the subtrahend is left in its original form.

c. the minuend is left in its original form and the subtrahend is changed to its 2's-complement.

d. the minuend and subtrahend are both left in their original form.

THANK YOU