telemator ® equipment and cabling management software system 1 / 41 push page down or mouse button

TelematorTelemator®®

Equipment and

cabling management software system

1 / 41Push Page Down or mouse button

www.mxdata.no 2

TelematorTelematorSoftware for registration and administration of:

• Core-, pair- and patch panel based networks

• Copper-, fiber- and transmission networks

• Small and big in- and outdoor networks

• In both projecting-, installation- and management phase

www.mxdata.no 3

Telemator – a common Telemator – a common memorymemory

Telemator A common memory

Installation Delivery Management

Economy Projecting

www.mxdata.no 4

Telemator in an Telemator in an organizationorganization

It is important to obtain a good teamwork across the organization in relation to working tasks, registered information and suppliers / customers of internal, leased out and any leased in circuits.

Telemator is central to these factors.

Telemator

Data

Organization

Telemator

Registeredinformation

Workingtasks

Customers/ suppliers

www.mxdata.no 5

Telemator – the connecting linkTelemator – the connecting link

Telemator

Fiber cable Copper cable Management system 1 Management system 2 Management system 3

Telemator may be the ”main reference” towards all systems, and gives work orders for both connections and programming in the different systems

www.mxdata.no 6

Telemator consists of 4 Telemator consists of 4 modulesmodules

Net diagram module

Base module

Projecting module

ElektroPartner

DAK

Trace module

Cable map

GIS

Tele

mato

rO

ther

s

Drawing-

program

www.mxdata.no 7

The base module is divided The base module is divided into 5 main cardfilesinto 5 main cardfiles

•Point card file

•Equipment card file

•Cable card file

•Circuit card file

•User card file

www.mxdata.no 8

Point cardfilePoint cardfile

In the Point cardfile you can register the whole specter of fixed points such as:

• Telecom room, equipment room, communication room, nodes, sites

• Distributors (both outdoor and indoor)

• Patch panel

• Workplace contacts

• Deducting manhole (fiber, copper)

• Straight splices (1:1)

www.mxdata.no 9

Point cardfile screenPoint cardfile screen

Equipment cardfileEquipment cardfile

Register any kind of equipment here, such as:

• Central equipment

• Transmission equipment

• Local and customer equipment

www.mxdata.no 11

Examples of central Examples of central equipmentequipment

Telephone centralsCalling centralsServersFire centralsAlarm centrals

www.mxdata.no 12

Examples of local and Examples of local and customer equipmentcustomer equipment

Telephone setsCalling devicesPersonal computersFax machinesPrintersSignal systemsRouters

www.mxdata.no 13

Examples of transmission Examples of transmission equipmentequipment

• Multiplexer• High order multiplexer• Sub multiplexer• Modem• Carrier frequency

equipment (CF)• Fiber termination

equipment• Radio link equipment• Point to multipoint radio• Digital cross connection

• Drop insert

• HUB

• Router

• Switch

• Satellite connection

• SDH net

• PDH net

• ATM net

• Frame Relay net

www.mxdata.no 14

Equipment cardfile levelEquipment cardfile level

Level 4 – connections w/signal on each port

Level 3 –ports on printed circuit board

Four levels are used to register any kind of equipment :

Level 2 – printed circuit board

Level 1 – general information

www.mxdata.no 15

Equipment cardfile Equipment cardfile screenscreen

www.mxdata.no 16

Cable cardfileCable cardfile

In the Cable card file, you can register all types of cables, such as:

• Copper cables based on pairs

• Copper cables based on single conductors (coax)

• Fiber cables

You can also terminate the cable ends in equipments, distributors, contacts or patch panels

www.mxdata.no 17

Cable cardfile screenCable cardfile screen

www.mxdata.no 18

Circuit cardfileCircuit cardfileAll of the network’s circuits are registered in the Circuit card file.

A circuit is also called a line, a signal path, a connection or a loop.

Examples of circuits:• Telephone circuit

• Data circuit

• 622 Mb SDH circuit

• 155 Mb ATM circuit

www.mxdata.no 19

Circuit cardfile screenCircuit cardfile screen

www.mxdata.no 20

Customer cardfileCustomer cardfile

In the Customer card file you register all users and connect them to the circuits they use

A user may be :• An employee

• A customer that leases circuits from your company

• A function in your company, i.e. a control center

• A supplier of leased circuits

www.mxdata.no 21

User cardfile screenUser cardfile screen

www.mxdata.no 22

Circuit routingCircuit routing

Other word for routing is crossing or patching.You can route a circuit in three different ways:

• Fully automatic routing from an equipment or a point to another equipment or point in the net

• Automatic routing on one cable, Telemator uses the first unoccupied and fault-free cores

• Manual routing on the core you want in the cable you choose

www.mxdata.no 23

Prints Prints (the 3 most frequently used) (1 of 2)(the 3 most frequently used) (1 of 2)

The installer may use:• A ”Circuit card” or a ”Graphical circuit card”

when connecting a circuit, to see how to connect in all different points the circuit goes through

• A ”Cross card” when crossing many circuits in the same point

• A ”Point card” to terminate many cables in one point

There are also a lot of other prints for different purposes

www.mxdata.no 24

A sA section ection in Circuit cardin Circuit card

www.mxdata.no 25

Network diagramNetwork diagram

Automatically draws a graphical overview of the network. This is based on information registered in the Base module. The network diagram shows:

• Equipments

• Points

• Cables

• Wireless connections

Prints are paginated for printers or plotters

www.mxdata.no 26

Network diagram screenNetwork diagram screen

www.mxdata.no 32

Cable trace moduleCable trace module

• Registration of ditches and similar, that might contain pipes and sub-pipes

• Cables can be placed directly into ditches, pipes or sub-pipes

• Traces in most digital cable maps (GIS) can be connected towards Telemator

• When you choose a trace on the map, Telemator will show you cables and pipes in the trace. You can also easily see circuits/lines inside the cable

www.mxdata.no 33

Functionality for fiber Functionality for fiber networksnetworks

• Shows each fiber in the cables• Welding of fibers in splices• Splice-card with colors• Registration of fiber manholes where the cable

are spliced or coiled• When using manual routing Telemator finds

all fibers spliced together into one trace• Print that simplifies analysis of test reports

www.mxdata.no 34

Functionality for Functionality for transmission systemstransmission systems

• Lower and higher order circuits• Time slots and channels• Digital cross-connections• Wireless connections on radio (-link) equipment• Patching between equipment and patch panel

inside telecom-rooms and the like• Shows both near- and remote end of a

”transmission-jump” in the same screen picture• Relation between local and high order side in

equipments

www.mxdata.no 35

Functionality for patch Functionality for patch panelspanels

• Termination of contacts down to pin-level

• Show contacts with or without pins

• Rout (patch) directly on contacts (built-in functionality makes sure that pins in the first contact are connected with correct pins in the other contact)

www.mxdata.no 36

Labour saving functionsLabour saving functions

• The ”Copy” function creates one or multiple equal elements in one operation – All earlier registrations can be used as templates

• Create libraries containing templates for equipments

• Termination of several cables in one distributor in one operation

• Routing of multiple circuits in one or several cables in one operation

• Renaming of several points, equipments, cables or circuits in one operation

www.mxdata.no 37

The databaseThe database

• Relational database

• xBase file format (one of the best known)

• Data can be read directly from a lot of common PC-tools like Word and Excel

• Demands almost no administration

• Multi-user program

www.mxdata.no 38

Multi- or single userMulti- or single user

Multi-user via common file server

Single user at stand alone PC

Access for the different user are read/write or just read

Anna File server Peter

Single user

www.mxdata.no 39

CoursesCourses

• Courses arranged at customer’s location

• The courses length are normally 2 days

www.mxdata.no 40

ConsultingConsulting

• “On the job training” for teaching you how to use Telemator in your own network

• Start help to get you started in early stages of registration

• Converting of data from other data systems

• Registration help for networks with or without existing documentation

www.mxdata.no 41

CustomersCustomers

Telecom companies Installation contractors Oil drilling platforms Factories Airports Railway networks Road administrators Energy suppliers Hospitals Schools Military camps Office buildings

Some known names are: Norge: Avinor, BKK bredbånd, Bravida,

Bredbåndsfabrikken, Forsvaret, Rikshospitalet, Song Networks, Telenor, TeleDanmark

Sverige: Arjeplog kommun, ComDaTe, Citylink, Gotland Energi, Kalix kommun, Luleå Kommun, RegNet, Oskarshamn Energi, Song Networks, Ventelo

Danmark: DSB, Luftfartsvæsenet, Song Networks

Some known constructions are: Troll B, one of the largest floating

production platforms in the world. Europe's most modern air control center in

Røyken, Norway.

www.mxdata.no 42

On the InternetOn the InternetGo to www.mxdata.no, and find more detailed information about Telemator and the different program modules

• Download a FREE evaluation version of Telemator in which you can register up to 15 cables

• News about the latest version

• Order program, maintenance agreement and courses

• The Telemator user interface can be switched between Norwegian, Swedish and English languages.

www.mxdata.no 43

EndEndYou have now been watching the functionality of

Telemator®

Thank you for your attention!

Any questions - don't wait to contact us!

Phone: (+47) 76 95 13 50

E-mail: support@mxdata.no

Internet: www.telemator.com