tender notice - pdpu.ac.in lab equipments (1).pdf · pdpu/sot/phy.lab/17- 18/ wt/ 86 page 3 of 29...
Post on 10-Oct-2019
6 Views
Preview:
TRANSCRIPT
PDPU/SOT/Phy.lab/17-18/WT/86 Page 1 of 29
PANDIT DEENDAYAL PETROLEUM UNIVERSITY Raisan village, Koba-Gandhinagar High-way,
Gandhinagar – 382007, GUJARAT,INDIA
Tel. No:- +91-079-23275416 Fax No:- +91-079-23275030
Tender Notice
Sealed Tender bids are invited from reputed / authorized supplier/ manufacturer for
supply installation and commissioning of the following items for Pandit Deendayal
Petroleum University, Gandhinagar, so as to reach the undersigned at the address given below
latest by the date and time specified here in below.
Tender No. Lab. Name EMD(Rs.) Estimated Cost
PDPU/SOT/Phy.lab/17-18/WT/86 Physics Rs.5500.00 Rs.550000.00
Bid documents containing complete details, specifications, terms and conditions etc can be
downloaded from the PDPU website http:// www.pdpu.ac.in.The download tender document
(PDF Format) comprises:
Part – I : Tender Notice
Part – II : Technical Specifications (Schedule- A )
Part – III : Commercial Terms & Conditions
The Technical Bids so received, shall be opened, on the date and time specified here in below
at the Pandit Deendayal Petroleum University, Raisan Village, Gandhinagar in the presence of
the bidders or their authorized representatives those wish to be present.
The Financial bids of only eligible Tenderer(s) shall be opened. The date and time of opening
the financial bids shall be announced on our website after scrutiny of the Technical bids.
Important Dates:
Last date and time for submission of Bid 08/103/2018 up to 5.00 p.m.
Opening of Technical Bid
09/03/2018 at 02.30 p.m. Important Instructions:
1. The offer shall be submitted on downloaded tender document only.
2. The Main envelope should contain followed four envelopes duly sealed.
(a) EMD Envelope : This should contain Demand Draft (D.D) for EMD document
in favour of Pandit Deendayal Petroleum University
payable at Ahmedabad.
PDPU/SOT/Phy.lab/17-18/WT/86 Page 2 of 29
(b) Technical Bid : Schedule- A
(c) General Commercial Terms & Conditions
(d) Price Bid : (Schedule B ) should contain only Price Bid.
All the four envelopes should be super scribed with tender No., date of opening and
Name of the bidder.
3. Offer without EMD is liable to be rejected forthwith.
4. The Tender, duly completed, should be sent by RPAD or Speed Post or Courier Service
(Hand Delivery is not acceptable) so as to reach latest by the date and time specified
here in above. Tender received after the due date and time is liable for rejection
irrespective of delay due to postal service or any other reasons.
5. Any technical query may be referred to Mr. Vikram Rathore, Nuclear Engineering
Department Email:-vikram.rathore@sot.pdpu.ac.in and information clarification
pertaining to this tender may be referred to Mr. R.K.Singh – Purchase Cell Pandit
Deendayal Petroleum University, Raisanvillage, Gandhinagar-Koba highway,
Gandhinagar-382007 OR E Mail : (purchase@pdpu.ac.in).
PDPU reserves right to reject any OR all tenders without assigning any reason.
Sd/-
Registrar Pandit Deendayal Petroleum University Raisan village, Koba-Gandhinagar High-way,
Gandhinagar – 382007, GUJARAT,INDIA
PDPU/SOT/Phy.lab/17-18/WT/86 Page 3 of 29
PART-II
SCHEDULE- A
DETAILS TECHNICAL SPECIFICATION FOR PHYSICS LAB EQUIPMENTS
Sr. No.
Name of equipment or instrument
Specification: Capacity, Range, Accuracy etc. Qty
.
1
DETERMINATION
OF INTERNAL
RESISTANCE OF
PRIMERY CELL BY
USING A
POTENTIONMETER
(ES-207)
POTENTIOMETER 10 wires
Fitted with pulleys on laminated board
Piano type jockey with 10 contact point OMEGA TYPE T-
185
02
POTENTIOMETER POWER SUPPLY 2V/4V, 2Amp
GALVANOMETER 30-0-30 (with push button controlled shunt on bake lite
stand)
DECADE RESISTANCE BOX Three dials in steps of 1, 10, 100 ohms, total 1110 ohms
LECLANCHE CELL OR CELL ELIMINATOR ONE WAY KEY ADEQUATE NO. OF CONNECTING WIRES, 100cm LONG STRONGLY SUPPORTED BY DETAILSED OPERATING INSTRUCTIONS, GIVING DETAILS OF OBJECT, THEORY, DESIGN PROCEDURES AND REPORT SUGGESTIONS.
2
DETERMINATION
OF MECHANICAL
EQUIVALENT OF
HEAT (J) BY
ELECTRICAL
METHOD (JOULE S
CALORIMETER)
(ES-213)
BOARD 1. DC power supply, 0-3v DC. At 2 Amp (on load), continuously
variable.
2. Digital voltmeter DC 3 digital having range of 20V.
3. Digital current meter DC 3 digit having range of 0-2 Amp.
4. Main on/off switch, fuse and jewel light.
5. The unit is operative on 230V ± 10% at 50Hz. AC mains.
02
THERMOMETER 0-110℃
JOULE S CALORIMETER With consisting of copper calorimeter fitted in teakwood
polished case with Bakelite top having holes for
thermometer & stirrer, two terminals connected to a coil
of wire.
ADEQUATE NO. OF CONNECTION WIRES 100 cm long.
STORONGLY SUPPORTED BY DETAILED OPERATING INSTRUCTIONS, GIVING DETAILS OF OBJECT, THEORY, DESIGN PROCEDURES, REPORT SUGGESTIONS AND BOOK REFERENCES.
3 DETERMINATION AUDIO FREQUENCY GENERATOR
PDPU/SOT/Phy.lab/17-18/WT/86 Page 4 of 29
OF VELOCITY OF
SOUND IN AIR
(ES-228)
20 Hz to 200 KHz out put
0-20 V r.m.s.
02
LOUD SPEAKER With baffle fitted in box with two meter wire and 4 mm
banana pins for connections.
DYNAMIC MICROPHONE With stand and 4mm banana pin.
STRONGLY SUPPORTED BY DETAILED OPERATING INSTRUCTION, GIVING DETAILS OF OBJECT, THEORY, DESIGN PROCEDURES, REPORTS, SUGGESTIONS AND BOOK REFERENCES. OTHER
DUAL TRACE CRO
LARGE BOAR
THERMOMETER 0-100℃
METRE SCALE.
4
STUDY OF THERMO
E.M.F. USING
DIGITAL D.C.
MICROVOLTMETER
AND SAND BATH
ES-231
DIGITAL D.C. MICROGVOLTMETER Very versatile multipurpose instrument for the
measurement of low dc voltage. It has 5 decade ranges
from 1mV to 10V with 100% over-ranging. For better
accuracy and convenience, readings are directly obtained
on 03 digit LED display. IC amplifier used offers
exceptionally low offset voltage and input bias
parameters, combined with excellent speed
characteristics.
02
A COPPER-CONSTANTAN THERMCOUPLE RETORT STANT WITH RING THERMOMETER
0-360℃
SAND BATH BEAKER
250 ml.
FUNNEL 4
TRIPOD STAND TEST TUBE
1
GLYCERINE PARAFFIN WAX WOODEN STAND UHF LEAD
12 With crocodile clip
STRONGLY SUPPORTED BY DETAILED OPERATING INSTRUCTION, GIVING DETAILS OF OBJECT, THEORY, DESIGN PROCEDURES, REPORTS, SUGGESTIONS AND BOOK REFERENCES.
5 STUDY OF COMPOUND PENDULUM
PDPU/SOT/Phy.lab/17-18/WT/86 Page 5 of 29
ELECTROMAGNETI
C DAMPING OF A
COMPOUND
PENDULUM AND TO
FIND THE
VARIATION OF
DAMPING CO-
EFFICIENT WITH
THE DISTANCE OF
THE CONDUCTION
LAMINA
ES-235
It is essentially an aluminum rod of size 870mm approx.
supported by two pin pivot arrangement on an
aluminium stand. The center of mass of the oscillatory
system can be shifted by sliding masses above & below
the pivot points.
02
DIGITAL TIMER TWO CHANNEL It provides measurement of pulse duration, pulse period
and two separate pulses with an accuracy of 10f micro
sec. on each channel. Two four digit display are used.
PHOTOSENSOR For use with OMEGA TYPE DT-018
SMALL BAR MAGNET A PAIR OF PLANE METALLIC PLATES. STRONGLY SUPPORTED BY DETAILED OPERATING INSTRUCTION, GIVING DETAILS OF OBJECT, THEORY, DESIGN PROCEDURES, REPORTS, SUGGESTIONS AND BOOK REFERENCES.
6
BALLISTIC
GALVANOMETER
SET UP
ES-245
A BOARD DC power supply, 0-2V at 100mA continuously variable
with switch.
Two fixed capacitor with selector switch.
Charge discharge switch.
Tapping switch for Ballistic Galvanometer.
Reversing switch
10 step each three band switch having 1E, 100E, 1K
Mains on/off switch, fuse and jewellight.
The unit is operative on 230V ±10% at 50Hz. AC mains.
02
BALLISTIC GALVANOMETER It consists of moving coil having a fairly large periodic
time and large moment of inertia. The phosphor bronze
suspension strip prevents shifting of zero. Its deflection is
closely proportional to current. The resistance of coil is
about 500W and gives sensitivity per micro coulomb one
meter distance of about 600mm.
LAMP AND SCALE Lamp is of cast aluminum with heavy iron adjustable
stand. It is transformer and works on 230V AC
translucent Perspex scale graduated in 25-0-25 cm is
used.
ADEUATE NO. OF PATCH CORDS STRONGLY SUPPORTED BY DETAILED OPERATING INSTRUCTION, GIVING DETAILS OF OBJECT, THEORY, DESIGN PROCEDURES, REPORTS, SUGGESTIONS AND BOOK REFERENCES.
7
REFRACTIVE INDEX
OF LIQUID BY
SPECTROMETER
ES-251
SPECTROMETER STANDARD 6 dia circle reading 30 seconds. The objectives used in
telescope and collimator are achromatic and provided
with rack and pinion focusing arrangement. Telescope
PDPU/SOT/Phy.lab/17-18/WT/86 Page 6 of 29
arm and prism table are provided with fine and coarse
adjustment. The prism table is provided with three
leveling screws and is engraved with concentric rings &
lines. The scales and venires are of stainless steel and are
machine divided. Clamping devices are also provided to
lock telescope and collimator after adjustment, with
prism clamping device and diffraction grating stand.
02
MERCURY LIGHT SOURE Complete with mercury vapour lamp 80W along with
choke and wooden box with holes with slide covers one
each on three sides.
HOLLOW PRISM Hollow glass prism size 50mm*50mm
PRISM Optically worked with two faces polished, equilateral,
size 38mm*38mm.
READING LENS 40/50 mm diameter with handle.
SPRIT LEVEL STRONGLY SUPPORTED BY DETAILED OPERATING INSTRUCTION, GIVING DETAILS OF OBJECT, THEORY, DESIGN PROCEDURES, REPORTS, SUGGESTIONS AND BOOK REFERENCES.
8
ABSORPTION
COEFFICIENT OF A
LIQUID WITH THE
HELP OF PHOTO
VOLTAIC CELL
ES-257
WOODEN BOX Source of light
Convex lens
Glass vessel graduated
Photo voltaic cell
Potentiometer
02
MICROAMMERER 50µA
A wooden box has been supplied to keep the items in
position and undesirable light do not enter into the photo
cell.
STRONGLY SUPPORTED BY DETAILED OPERATING INSTRUCTION, GIVING DETAILS OF OBJECT, THEORY, DESIGN PROCEDURES, REPORTS, SUGGESTIONS AND BOOK REFERENCES.
9
REFRACTIVE
INDICES µ 𝐴𝑁𝐷µ𝑒
OF CALCITE FOR
THE ORDINARY
AND EXTRA
ORDINARY RAYS
USING
SPECTROMETER
SPECTROMETER STANDARD 6 dia circle reading 30 seconds. The objectives used in
telescope and collimator are achromatic and provided
with rack and pinion focusing arrangement. Telescope
arm and prism table are provided with fine and coarse
adjustment. The prism table is provided with three
leveling screws and is engraved with concentric rings &
lines. The scales and venires are of stainless steel and are
02
PDPU/SOT/Phy.lab/17-18/WT/86 Page 7 of 29
AND SODIUM LIGHT
ES-273
machine divided. Clamping devices are also provided to
lock telescope and collimator after adjustment, with
prism clamping device and diffraction grating stand.
SODIUM LIGHT SOURCE Sodium light source complete with sodium lamp 35 watt
with vaccum jacket, transformer & wooden one each on
every side at different heights.
QUARTZ PRISM Optically worked with two faces polished equilateral size
25mm*25mm.
READING LENS 40 mm diameter with handle
SPIRIT LEVEL 50mm length.
Strongly supported by detailed operating instruction, giving
details of object, theory, design procedures, reports, suggestions
and book references.
10 EXPERIMENTS
WITH SONOMETER
ES-279
SONOMETER One meter long, made of soft wood and well polished.
Fitted with two meter scale graduated in centimeters. It is
provided with wire of two different material steel and
brass, sliding knife edges and hook etc.
02
TUNING FORK Set of eight, small size, made of steel, nickel plated.
Frequency is marked on the tuning forks. The frequencies
are 256, 288, 320, 341, 384, 420, 480, and 512
RUBBER PAD FOR TUNING FORK STEP DOWN TRANSFORMER ELECTRORMER HORSE SHOE NAGNET SCREW GAUGE RETORD STAND WITH CLAMP SLOTTED WEIGHTS
½ Kg set of 5 including hanger i.e.2 ½ Kg total.
CONNECTIONG WIRES STRONGLY SUPPORTED BY DETAILED OPERATING INSTRUCTION, GIVING DETAILS OF OBJECT, THEORY, DESIGN PROCEDURES, REPORTS, SUGGESTIONS AND BOOK REFERENCES.
11
HIGH RESISTANCE
BY LEAKAGE
METHOD USING
DIGITAL D.C.
MICROVOLTMETER.
ES-286
A BOARD DC power supply, 0-5V at 500 mA continuously variable.
Fixed capacitor.
Unknown high Megohmresistence 4 nos.
Switches 3 nos. for charging, discharging & leakage
discharging.
Mains on/off switch, fuse and jewellight.
PDPU/SOT/Phy.lab/17-18/WT/86 Page 8 of 29
The unit is operative on 230V ± 10 % at 50Hz. AC mains.
02 DIGITAL DC MICROVOLTMETER OMEGA TYPE DMV-022
DIGITA STOP CLOCK OMEGA TYPE DSC-602
STRONGLY SUPPORTED BY DETAILED OPERATING INSTRUCTION, GIVING DETAILS OF OBJECT, THEORY, DESIGN PROCEDURES, REPORTS, SUGGESTIONS AND BOOK REFERENCES. LIST OF ACCESSORIES
Board omega type ES-286.
Digital DC microvoltmeter (omega type DMV-022)
Digital stop clock OMEGA TYPE DSC-602
Patch cord 4mm red 1meter
12
CHARACTERISTICS
OF A SOLAR CELL
ES-290
ONE BOARD Digital DC Ammeter dual range, 3 ½ digit 7 segment
display.
Digital DC voltmeter dual range, 3 ½ digit 7 segment
display.
Digital DC voltmeter 3 ½ digital 7 segment display.
Socket for table lamp with intensity control
Nine different resistance values selected by a band
switch.
02
SOLAR CELL MOUNTED
TABLE LAMP 100 watt
FIVE DIFFERENT AREA CHOPPERS ADEQUATE NO. OF PATCH CORDS STACKABLE 4 mm SPRING LOADED PLUG LENGTH 50cm STRONGLY SUPPORTED BY DETAILED OPERATING INSTRUCTION, GIVING DETAILS OF OBJECT, THEORY, DESIGN PROCEDURES, REPORTS, SUGGESTIONS AND BOOK REFERENCES.
13
MOMENT OF
INERATIA OF A
GIVEN BODY USING
INERTIA TABLE
ES-293
INERTIA TABLE It consists of an aluminium disc of approximately 15 cm
dia with a concentric groove & having four masses in it. A
aluminium disc and it s midpoint is fitted with chuck for
suspension. It can be suspended by steel wire provided at
the centre of a long frame work provided with, circular
base which is fitted work provided with, circular base
which is fitted with leveling screws. It is provided with
auxillary body of four different shapes. A mirror is also
attached to count the number of oscillation with the help
of lamp & scale arrangement (if used).
02
DIGITAL STOP CLOCK With start/stop operation by means of toggle switch &
RESET by a push button switch.OMEGA TYPE DSC-602 it
has a range of 999.9 seconds with resolution of 0.1
seconds and accuracy of ± 0.01% (quartz controlled).
PDPU/SOT/Phy.lab/17-18/WT/86 Page 9 of 29
Display is through 4 no s of 12.5mm bright seven
segment displays and working voltage of the unit is 230 ±10 % 50Hz.
SPIRIT LEVEL 60/80 mm length. (2 nos)
VERNIER CALLIPERS STRONGLY SUPPORTED BY DETAILED OPERATING INSTRUCTION, GIVING DETAILS OF OBJECT, THEORY, DESIGN PROCEDURES, REPORTS, SUGGESTIONS AND BOOK REFERENCES. OTHER APPARATUS
Physical balance with weight box
14
DETERMINATION
OF THE VALUE OF
g WITH THE HELP
OF A BAR
PENDULUM
ES-294
COMPOUND BAR PENDULUM Consisting of a steel bar 100 cm long bored at equal
intervals, with two removable knife edge & a wall
bracket.
02
DIGITAL STOP CLOCK With START/STOP operation by means of toggle switch &
RESET by a push button OMEGA TYPE DSC-602 switch. It
has a range of 999.9 seconds with resolution of 0.1
seconds and accuracy of ±0.01% (quartz
controlled).display is thorough 4 no s of 12.5 mm bright
seven segment displays and working voltage of the unit is
230V± 10% 50Hz
WOODEN SCALE 1 meter
STRONGLY SUPPORTED BY DETAILED OPERATING INSTRUCTION, GIVING DETAILS OF OBJECT, THEORY, DESIGN PROCEDURES, REPORTS, SUGGESTIONS AND BOOK REFERENCES.
15
VERIFICATION OF
NEWTON S LAW OF
COOLING
ES-295
NEWTON S LAW OF COOLING APPARTUS Joule s calorimeter consisting of copper calorimeter fitted
in teakwood polished case with Bakelite top having holes
for thermometer & stirrer, tow terminal connected to a
coil of wire.
02
THERMOMETER 110℃ × ½
0-5 V DC AT 3A , continuously variable regulated and short circuit protected Battery eliminator OMEGA TYPE BE-5/3 DIGITAL STOP CLOCK
With START/STOP operation by means of toggle switch &
RESET by a push button switch. OMEGA type DSC-602 it
has a range of 999.9 seconds with resolution of 0.1
econds and accuracy of ± 0.01% (quartz controlled).
Display is thorough 4 no s of 12.5mm bright seven
segment displays and working voltage of the unit is 230V ± 10% 50Hz.
STRONGLY SUPPORTED BY DETAILED OPERATING INSTRUCTION, GIVING DETAILS OF OBJECT, THEORY,
PDPU/SOT/Phy.lab/17-18/WT/86 Page 10 of 29
DESIGN PROCEDURES, REPORTS, SUGGESTIONS AND BOOK REFERENCES.
16
FINDING THE
FOCAL LENGTH OF
A CONVEX LENS BY
DISPLACEMENT
METHOD
ES-297
OPTICAL BENCH DOUBLE ROD All metal having four metal riders. One rider with
transverse motion & three fixed and (round rod type)
provided with lavelling screws. Complete with two lens
holders & two needles. One meter long.
02 CONVEX LENSE 50mm dia of different focal length (2. nos)
STRONGLY SUPPORTED BY DETAILED OPERATING INSTRUCTION, GIVING DETAILS OF OBJECT, THEORY, DESIGN PROCEDURES, REPORTS, SUGGESTIONS AND BOOK REFERENCES.
17 K- type
Thermocouple
Under range minimum Temp :- (-270 to -250) Degree Celsius
Nominal range low limit Temp :- (-200 to -180) Degree Celsius
Nominal range high limit Temp :- 1350 Degree Celsius
Normal range accuracy temp :- ± 1 Degree Celsius
Enabled with 4 mtr wire
02
18 Temperature
Controller
Digital Display with minimum 2x4 digits
Accuracy around 0.2% f.s. ±1 at 25°C room temperature
Thermal drift 0.005 to 0.008% f.s. / °C
Main input (configurable digital filter) with minimum Sampling
time 120 msec.
configurable with all Types of TC (Thermocouples) J, K, R, S, T a
custom linearization can be inserted
Cold junction error 0.1° / °C
°C / °F selection configurable from faceplate
Linear scale ranges -1999...9999, with configurable decimal
point position
Controls Pid, Autotune, on-off pb - dt - it 0.0...999.9 % -
0.00...99.99 min - 0.00...99.99 min
Automatic blanking maintains PV value display, optional
exclusion
Configurable alarms up to 3 alarm functions assignable to an
output and configurable of type: maximum, minimum,
symmetrical, absolute/relative, LBA, HB
Power supply : 100...240Vac/dc ±10% max 18VA
01
19 Hot Plate with
Magnetic stirrer
Max. Stirring capacity (H2O) : 5000 ml
Speed : 100 rpm to 2000 rpm
Minimum Dimension (W x D x H) : 120mm x 120 mm x 45 mm
Maximum temperature : 120°C
Temperature accuracy : 1°C
Display : Digital Temperature and RPM (Optional)
Holder : Adjusting holder for thermometer
Power Supply : 240 V ; 50 Hz
01
PDPU/SOT/Phy.lab/17-18/WT/86 Page 11 of 29
PART-III
GENERAL COMMERCIAL TERMS AND CONDITIONS
DEFINATIONS: Tenderer/Supplier/Bidder: These terms are synonym and mean the firm who intends or
who has submitted offer in response to this tender.
Tender / Bid Document: means this tender document.
PDPU: Pandit Deendayal Petroleum University having it office at Raisan Village,
Gandhinagar-382007 and includes it s successors and assignee.
1 1. The tenderer should thoroughly read all the clauses of the tender document before
submitting the duly filled in Tender.
Tenderer shall place the following ANNEXURES as FIRST EIGHT pages of their Technical
Bid in the following sequence.
FIRST PAGE ANNEXURE –1
SECOND PAGE ANNEXURE - 2
THIRD PAGE ANNEXURE - 3
FOURTH PAGE ANNEXURE - 4
FIFTH PAGE ANNEXURE - 5
SIXTH PAGE ANNEXURE – 6
SEVENTH PAGE ANNEXURE – 7
EIGHTH PAGE ANNEXURE – 8
2
SUBMISSION OF BID DOCUMENT: PDPU follows two bid systems. Tenderer shall submit two separate bids viz.
a) Techno – Commercial Bid (Technical Bid) and
b) Price Bid as under.
(a) Technical Bid: This shall be in sealed envelope. It shall be super scribed
Technical Bid: Tender No. Name of Bidder:
It shall contain the following (i) six pages as mentioned in condition 1 above and
TENDERERS SHOULD FURNISH THE FOLLOWING DETAILS:
[1] Technical Specifications(Part-II) and General Term & Conditions(Part –III) of
Tender Document Duly Sign on each page by Authorized Signatory as token of his
acceptance.
[2] Audited Accounts of last three years of the firm.
[3] Performance reports if any.
[4] Consent letter from their principals to manufacture such items.
[5] All the testing equipment MUST have been calibrated up to date.
[6] List of customers
PDPU/SOT/Phy.lab/17-18/WT/86 Page 12 of 29
(ii) All the information and supporting documents for (i) above
(iii) Details, Documents, Literature, certificates etc. for the equipment / Material
offered.
(b) Price Bid: This shall be in sealed envelope. It shall contain offer price in the form specified in the tender document as Schedule-
B . The Printed Price list or price in different format will render the offer liable for
rejection. It shall be super –scribed as:
Price Bid: Tender No.: Name of Bidder:
c) EMD Envelope: This envelop shall contain the following:
Demand draft or Bank Guarantee, as the case may be, for EMD
supporting document, as mentioned hereof, if bidder seeks exemption in EMD
It shall be super – scribed as :
EMD Envelop: Tender No.: Name of Bidder:
d) Main Envelope: This envelope shall contain envelop of Technical bid, envelop of EMD and Price Bid. It shall be super – scribed as :
Main Envelop: Tender No.: Name of Bidder:
The entire bid document (Main envelope mentioned above) should be submitted so as
to reach this office not later than 02.00 P.M. on due Date as specified in the tender
notice through RPAD / Speed post or Courier only
Incomplete bids and amendments and additions to bids after opening of the bids will
be ignored out rightly.
The technical scrutiny committee of PDPU shall evaluate the techno-commercial view
of the tender. PDPU reserves the right to open or not to open the price bid of the
bidders on the basis of their past performance of their supplied materials.
The price bid of those who are techno-commercially acceptable shall only be opened.
3 PRICE EVALUATION: Normally no price preference shall be given on any account. All tenders will be evaluated
on firm price end-cost basis; The parties however shall give the detailed break-up of the
end cost. If PDPU feels that there is lack of serious competition or for any other reasons,
PDPU may negotiate with the bidder. PDPU s decision to accept any or all tenders shall be
final and binding on all the parties. However, the DG of PDPU or the Authorized committee
at its sole discretion reserves the right to negotiate with other tenderer in case the
technical specification of some or all products are found to be superior.
4 EARNEST MONEY DEPOSIT: (E.M.D.) E.M.D. is payable @1% of the value of the items offered. The EMD is payable by Demand
Draft, of any Nationalized Banks, drawn in favor of the PANDIT DEENDAYAL PETROLEUM
UNIVERSITY, payable at Ahmedabad. If the amount of EMD is more than Rs. 25000/- the
same can be paid by an irrecoverable Bank Guarantee from any nationalized Bank in a
standard format prescribed by PDPU (Format given in this tender document).
PDPU/SOT/Phy.lab/17-18/WT/86 Page 13 of 29
5 DELAYED AND LATE TENDERS: No Tender shall be accepted / opened in any case which are received after due date and time of the receipt of tender irrespective of delay due to postal services or any other reasons and PDPU shall not assume any responsibility for late receipt of tender. Any correspondence in this matter will not be entertained.
6
PRICES: The details of the price shall be given in Price Bid (Schedule-B) only and nowhere else.
Prices quoted shall be FIRM and on F.O.R. Destination basis (i.e. PDPU,Gandhinagar).
However, the Tenderer should indicate in the Price Bid, the break-up of Unit F.O.R.
Destination Prices with break-up of Unit Ex-works price ,Excise duty, VAT/Sales Tax,
Custom Duty, average freight, packing charges, and Insurance Charges. Tenderer should
quote the Freight as well as Insurance Charges both separately as shown in price bid.
Please note that payment of excise duty will be made only on Ex-Work prices. Also, please
mention rate of Excise duty. If this is not specifically mentioned then PDPU will have the
option to take the prices as exclusive of taxes and duties (at maximum slab rates) for the
evaluation of the tenders.
The Tenderer should invariably indicate the total unit end cost price considering all their
costs / calculations in the Price bid itself for each item and all sub-items if any. This is
mandatory. Cost components hidden / furnished elsewhere will not be considered and will
be ignored out-rightly.
Only for Traders - Tender:
[i] In case of a trader-tender, if the quotation is furnished for all inclusive rates and the
rates of taxes and duties are indicated without indicating the amount, in such cases, the
price is eligible for statutory variation.
[ii] Where the trader-tender quotes all inclusive rates without indicating the rate of Taxes
and Duties included in the quoted price, the price is not eligible for any statutory variation.
7
REFUND / FORFIETURE OF E.M.D EMD will be forfeited if (i) the tender, it covers, is withdrawn during the validity of the
offer or (ii) the Tenderer fails to furnish / deposit the Performance Guarantee towards
Execution Period (security deposit).
EMD of the unsuccessful tenderer s will be returned without intimation within 60 days of
placing of the order to the successful Tenderer subject to the unsuccessful bidder
returning the original receipt of the EMD together with the advance stamped receipt, to
the Accounts Officer of PDPU.
EMD will be returned to the successful bidders, only on their submission of performance
guarantee towards execution period against order released to them.
8
PERFORMANCE GUARANTEE (PG) TOWARDS EXECUTION PERIOD: (i.e. SECURITY DEPOSIT): Successful tenderers will be required to pay an amount equivalent to 10% (Ten) of the
value of the purchase order as Performance Guarantee (Security Deposit) within 10 days
from the date of the purchase order failing which the purchase order is liable to be
cancelled at the cost and the risk of the successful Tenderer (at the discretion of PDPU).
It can be paid by Demand Draft drawn in favour of PANDIT DEENDAYAL PETROLEUM
UNIVERSITY payable at Ahmedabad or in the form of Bank Guarantee from Nationalized
Bank if the amount is more than Rs.35,000/-.
PDPU/SOT/Phy.lab/17-18/WT/86 Page 14 of 29
The Bank Guarantee will be executed on the standard form prescribed by PDPU as
APENDIX - I. The Bank Guarantee so furnished should have clear one time validity till the completion of
the order in all respects. Bank Guarantee for Interim period will not be acceptable. If by any
reasons the supply period is extended then the supplier shall undertake to renew the Bank
Guarantee at least one month before the expiry of the validity failing which PDPU will be
free to encash the same.
The successful bidder/s shall have also to furnish PG (as specified here of) for the contract
value towards warranty / guarantee period separately as applicable as per tender
conditions.
Performance Guarantee towards Execution Period (Security Deposit) will be returned on
successful completion of the Order and only after the Performance Guarantee towards
warrantee/guarantee, as mentioned above, is submitted.
9
VALIDITY OF THE OFFERS: The offers shall to be kept valid for a period of 120 days from the date of opening of
technical bids. In case the finalization of the tender is likely to be delayed, the tenderers
will be asked to extend the same without change in the prices or any terms and conditions
of the offer. If any change is made, original or during the extended validity period, the
offers will be liable for outright rejection without entering into further correspondence in
this regard and no reference will also be made.
10 TRUCK RECEIPT (T.R) / AIRWAY BILL (A.B) All the Goods should be dispatched freight paid and the A.B / T.R should be forwarded
directly to PDPU Office at Raisan Village, Gandhinagar. The demurrage charges, if any, paid
by the PDPU due to delay in informing PDPU or any other reason attributable to supplier,
will be deducted from his bill. It is essential that packing notes and invoices are furnished
in respect of every consignment.
The supplier will be responsible for any damages / shortage claim rejected by the
respective Authorities for want of a clear A.B / T.R.
Materials may be dispatched by any convenient mode of transport and up to PDPU i.e. F.O.R
Destination.
11 PACKING AND FORWARDING CHARGES: The prices shall be inclusive of packing & forwarding charges. The Materials should be
strongly and adequately packed to ensure safe arrival at destination. The materials
dispatched from overseas by Air / Shipping should be packed such that it can withstand
rough handling and possible corrosion due to exposure to salt laden atmosphere, salt spray
or open storage. All packing must be clearly marked with order Number and consignee s
name and address.
12 TRANSIT INSURANCE: All the materials will be required to be supplied up to Destination against all transit risks,
such as damage, loss, theft, fire, etc. The insurance period shall cover 15 days after the date
of receipt of materials at site to enable PDPU to check up stores fully. The suppliers will be
responsible for free replacement of such stores which have been received short, damaged
or broken within 15 days.
The cost of damaged, defective stores materials will however be deducted from the bills of
the suppliers and will be refunded only after replacement thereof. It will be the
PDPU/SOT/Phy.lab/17-18/WT/86 Page 15 of 29
responsibility of the supplier to lodge claim against the insurance on receiving necessary
advice from PDPU.
13 ACCEPTANCE OF STORES: The equipments/ materials to be supplied against this tender are subject to their
acceptance by PDPU or any other Officer deputed for this purpose.
14
UNLOADING: Unless specified otherwise in the purchase order, Unloading of the materials shall be
arranged by PDPU.
15 STATUTORY VARIATION: Any statutory increase or decrease in the taxes and duties subsequent to the offer under
this tender if it takes place within the original contractual delivery date will be to PDPU
account subject to the claim being supported by documentary evidence. No increase due to
such variation shall be allowed for the portion of the delivery after the original contractual
delivery date. However, if any decrease takes place after the contractual delivery date, the
advantage will have to be passed on to PDPU.
16 PAYMENT TERMS : A. In case of Domestic(i.e. Indian) Supplier the payment Terms as Under :-
70% of Payment only after proper verification of the delivered equipments by
the vender.
Remaining 30% Payment of invoice value within one month on successful
installation, Commissioning and training.
B. In case of Foreign Supplier the Payment Terms is as Under :- 90 % payment through Irrevocable Letter of Credit.
10 % payment through Wire Transfer within 5 (five) Working Days after the date of
Successful Commissioning and Installation of the System.
OR 90% payment will be released through wire Transfer within 5 (five) Working Days
after receipt of the material.
10% payment will be released through Wire Transfer within 5 (five) Working Days
after the date of Successful Commissioning and Installation of the System.
OR 100 % through Wire Transfer within 5 (five) Working Days after the date of
Successful Commissioning and Installation of the System.
Installation: - The PDPU will be responsible to prepare the site for installation of
equipment. The vendor has to arrange for technician, other manpower, tools etc for
installation and commissioning of the goods supplied by him.
17 REPEAT/ADDITIONAL ORDERS: PDPU reserves the right to place repeat order / additional order on the successful
tenderers up to 25% of the original quantity of the P O at the same prices, terms and
conditions stipulated in the original contract during three months from the date of
Purchase Order.
18
DELIVERY PERIOD: The Tenderers will have to quote a firm delivery period subject to the force Majeure
conditions as accepted by PDPU. Tenderer should mention their delivery period. Time
being the essence of this tender, delivery period shall be strictly adhered to. Delay in
execution of order on account of any reasons will be subject to levy of penalty.
PDPU/SOT/Phy.lab/17-18/WT/86 Page 16 of 29
19 PENALTY FOR LATE DELIVERY:
In case, the materials are not delivered within the period stipulated in the order, penalty shall be levied at ½% per week on the prices (End cost excluding taxes) subject to maximum 10% reckoned on the value of late delivered supplies.
Due consideration will be given to waive levy of penalty for the reasons absolutely beyond
suppliers control for which documentary evidence will have to be provided. The request
for extension in delivery giving reasons and supporting documents shall have to be made
available within one month on completion of the supply, and no request to waive levy of
penalty will be entertained / reviewed during the execution of order.
20
EXTENSION IN CONTRACTUAL DELIVERY DATE: It will be supplier s responsibility to ensure that goods are delivered within the stipulated
delivery period. However, if PDPU may consider extension of delivery period with or
without statutory variations, for the reasons beyond the control of the tenderer and subject
to the Penalty as mention hereof.
Such extension will be subject to the following conditions.
[a] No increase in price on account of any statutory increase in or fresh imposition of
customs duty, excise duty, sales tax or on account of any other tax or duty shall be
admissible on the material delivered after the original contractual delivery date.
[b] Notwithstanding any stipulation in the contract for increase in price on any other
ground, no such increase which has become effective on or after the contractual delivery
date shall be admissible on material delivered after the original contractual delivery date.
[c] Nevertheless, PDPU shall be entitled to the benefit of any decrease in price on account
of reduction in or remission of customs duty, excise duty, sales tax or on account of any
other tax or duty or on any other ground as stipulated in the P.O., which takes place on or
after the contractual delivery date of the said P.O. for the material delivered after the
original contractual delivery date.
21 REPLACEMENTS OF GOODS BROKEN, DAMAGED OR SHORT: In the event of any material or part thereof found broken or damaged or received short
during transit or during installation or Commissioning or testing at site, before
commissioning in service the suppliers shall replace the same free of cost. However, PDPU
will recover amount equivalent to the cost of such damaged / broken / short supplied
materials and will repay when actual replacement is given.
22 POST TENDER CORRESPONDENCE / ENQUIRIES: The Tenderer will refrain from pursuing / canvassing the matter, directly or indirectly with
any Office of PDPU as otherwise the same would amount to disqualification of the tender.
23 PDPU shall have the right to make any changes, additions / deletions or modifications in
any terms / conditions or quantity of the tender and / or specifications as may be deemed
necessary by PDPU at its sole discretion at any time before the due date of opening of the
tender.
24 PDPU does not accept the printed conditions of any Tenderer. It will be ignored without
any reference; hence tenderers should withdraw such printed conditions if they have any.
PDPU shall accept only unconditional tender.
25 If technical deviations furnished by the Tenderer are not agreeable to PDPU, the offers may
PDPU/SOT/Phy.lab/17-18/WT/86 Page 17 of 29
be ignored. However it will be solely at discretion of PDPU to consider the technical
deviations OR not for considering the Tenderer. No correspondences of the Tenderer will
be entertained in this matter.
26
Please indicate whether the goods offered are first sale or second sale so as to determine
the payment of sales tax.
27 Revision of prices or any commercial terms affecting the price after opening of technical
bids shall not be considered and will be ignored.
28 Tenderers shall indicate the name of their partners of their manufacturing firm.
29 Tenderer should specifically mention in the offers the name of the Partners / Proprietor /
Directors who is / are the signing authority.
30 GUARANTEE: If the goods, stores and equipments found defective due to bad design or workmanship the
same should be repaired or replaced by the tenderer free of charge if reported within 18
months of their receipt at site or 12 months from the date of commissioning of equipments
whichever is earlier. Tenderer will be responsible for the proper performance of the
equipments / materials for the respective guarantee period.
31
APPROVAL: The goods shall be subject to the approval of PDPU after receipt of the Material at site.
32 PDPU would prefer the offers from manufacturers directly. All the manufacturers should
quote for those items, which are actually manufactured at / rolled by their plants. This
should be strictly adhered.
PDPU reserves the right to inspect, suppliers factory at any time during the currency of the
contract in case order is placed on supplier and also to inspect manufactured material
before testing / packing / dispatch.
33 If in any company, the interest of any employee of the PDPU. or his relative as defined in
Section VI of the Company s Act. 1956, is 10% or more, PDPU will not deal with such
company at all. Tenderer therefore, must specifically disclose this fact in his technical Bid.
Non-disclosure of such facts would disqualify the Tenderer for further dealing with PDPU.
34
TERMINATION OF CONTRACT: In case, the supplier fails to deliver the stores / materials / equipments or any consignment
thereof within contractual period of delivery or in case the stores are found not in
accordance with prescribed specification and/or the approved sample, PDPU shall exercise
its discretionary power as under:
[a] To recover, from the supplier as agreed, by way of penalty clause above,
or
[b] To purchase from elsewhere, after giving notice of 15 days to the supplier, on his
account and his risk
or
[c] To cancel the contract.
or
[d] PDPU at any time terminate the contract by giving written notice to the qualified
Bidders/Tenderer without compensation to the qualified tenderer, if he become bankrupt
or otherwise, insolvent or in case of dissolution of firm or winding up of company provided
that such termination will not prejudice or effect any right of action or remedy which has
thereafter to the University.
PDPU/SOT/Phy.lab/17-18/WT/86 Page 18 of 29
In the event of the risk purchase of stores of similar description, the opinion of PDPU shall
be final. In the event of action taken under clause (a) or (b) above, the supplier shall be
liable to pay for any loss which PDPU may sustain on this account
Further, PDPU reserves the right to terminate the Contract (i.e. Purchase order) at any
time, without assigning any reasons, whatsoever, by giving a notice or not less than period
of ONE month. Suppliers will not be entitled for any compensations / damages / losses,
refund by PG whatsoever, on account of such termination of the Contract.
35
ARBITRATION: All questions, disputes or differences whatsoever which may at any time arise between the
parties to this agreement touching the agreement or subject matter thereof, arising out of
or in relation to there and whether as to construction or otherwise shall be referred to the
decision of the Sole Arbitrator, appointed by the PDPU, for that purpose, who shall be a
retired High Court Judge or retired District and Sessions Judge, and the decision of the said
Arbitrator shall be final and binding upon the parties. Reference to the arbitration shall be
governed by the provisions of Indian Arbitration & Conciliation Act. 1996 as amended from
time to time and the rules made there under.
36 JURISDICTION: All questions, disputes or differences arising under, out of or in connection with the Tender
/ Contract shall be subject to the exclusive jurisdiction of Ahmedabad court.
37 If the tenderer is an Agent, he will have to give information and declare the name of the
principal from which he will source the materials along with company s written
confirmation about quality and backup performance guarantee. Only on getting complete
information from Agent, such offer, if found suitable, shall be considered.
38 PDPU reserves the right to cancel any or all the offers / bids or to accept any offer without
assigning any reasons.
In case PDPU finds that there is an attempt of cartel in the prices, PDPU reserves the right
to consider or reject any or all the parties offers without assigning any reasons thereof.
39 PDPU reserves the right to increase or decrease the quantity against each item/s while
placing the order.
40 The names of the Partners / Directors / Sole Proprietors and responsible person and his
updated Address / Telephone, Fax Numbers etc. should be invariably mentioned in the
Annexure provided for this purpose in this document.
41 The Tenderer should give in his offer, the full name and address with phone, Fax & mobile
numbers of the Authorized Representative to do liaison work with PDPU on their behalf.
42 The tenderers should invariably write the name and address of the Company, both on
sealed covers of EMD, Technical & Price Bids. The tender covers without the name and
address will not be opened.
43 The tenderers are required to furnish the technical information and the Guaranteed
technical particulars (GTP) along with company seal and signature of the Tenderer on each
and every page / papers of the tender documents.
44 Tenderer should invariably fill up all the details of all the Annexure/s including the prices
in the Price Bid Annexure of this tender document and should be duly signed by authorized
signatories with their rubber stamp and along with Company s seal / stamp affixed on each
paper.
45 If the Tenderer fails to pay the Security Deposit or defaults in execution of the orders
PDPU/SOT/Phy.lab/17-18/WT/86 Page 19 of 29
placed or if PDPU suffers any financial loss due to this, then PDPU will be at liberty to
adjust the amount from other orders of the same firm or by encashing the Bank Guarantee.
46 All the tenderers must ensure that all the relevant documents / papers submitted with the
tender should be serially numbered, properly bounded / tied together and properly
documented.
47 All the above points should be complied by the Tenderers. If not, tenders are likely to be
ignored without making any further reference.
--------------------×--------------------------×-------------------------×------------------------×-------------
PDPU/SOT/Phy.lab/17-18/WT/86 Page 20 of 29
E. M. D. BANK GUARANTEE FORMAT FOR TENDER NO. PDPU / ________________________________ _
APPENDIX – I (BANK GUARANTEE ON NON-JUDICIAL STAMP PAPER OF Rs.100/-)
Messer s WHEREAS __________________________________________(Name & Address of the Firm) having
their registered office at _____________________________________ (Address of the firms Registered
office) (Hereinafter called the Tenderer ) wish to participate in the tender No. _______________ for
_____________________________ of (Supply/Erection/Supply & Erection Work) (Name
of the material/equipment/Work) for___________________________ PANDIT DEENDAYAL
PETROLEUM UNIVERSITY and WHEREAS a Bank Guarantee for (Hereinafter called the
Beneficiary ) Rs._____________(Amount of EMD) valid till _________(Mention here date of validity of
this guarantee which will be 4 (FOUR) months beyond initial validity of Tender s offer) is
required to be submitted by the tenderer along with the tender.
We, ____________________________________________________________________
(Name of the Bank and address of the Branch giving the Bank Guarantee)
having our registered office at ______________________(Address of Bank s registered office) hereby
give this Bank Guarantee No.________________ dated _________ and hereby agree unequivocally and
Unconditionally to pay within 48 hours on demand in writing from the PANDIT DEENDAYAL
PETROLEUM UNIVERSITY or any officer authorized by it in this behalf any amount not
exceeding Rs._______________(Amount of E.M.D.), (Rupees_______________________________________
_________________(In words) to the said PANDIT DEENDAYAL PETROLEUM UNIVERSITY on behalf
of the Tenderer.
We_________________________________(Name of the Bank) also agree that withdrawal of the tender or
part thereof by the tenderer within its validity or Non submission of Security Deposit by the
Tenderer within one month from the date tender or a part thereof has been accepted by the
PANDIT DEENDAYAL PETROLEUM UNIVERSITY would constitute a default on the part of the
Tenderer and that this Bank Guarantee is liable to be invoked and encashed within its validity
by the Beneficiary in case of any occurrence of a default on the part of the Tenderer and that
the encashed amount is liable to be forfeited by the Beneficiary.
This agreement shall be valid and binding on this Bank upto and inclusive of
____________________(Mention here the date of validity of Bank) and shall not be terminable by
notice or by Guarantee) change in the constitution of the Bank or the firm of Tenderer Or by any
reason whatsoever and our liability hereunder shall not be impaired or discharged by any
extension of time or variations or alternations made, given, conceded with or without our
knowledge or consent by or between the tenderer and the PDPU.
NOT WITH STANDING anything contained hereinbefore our liability under this guarantee is
restricted to Rs.__________(Amt. of E.M.D.) (Rupees _______________________________
_____________________________________) (In words). Our Guarantee shall remain in force
till_________(Date of validity of the Guarantee).
Place:
Date:
Please Mention here Complete Postal Address
of the Bank with Branch Code, Telephone and
Fax Nos.
SIGNATURE OF THE BANK S
AUTHORISED SIGNATORY WITH
OFFICIAL SEAL
PDPU/SOT/Phy.lab/17-18/WT/86 Page 21 of 29
ON STAMP PAPER OF RS.100/-
FORM OF BANKER S UNDERTAKING [For Performance Guarantees (PG) as per clause no.8 of commercial terms and
conditions]
We, Bank of___________________________________hereby agree unequivocally and
unconditionally to pay within 48 hours on demand in writing from the PANDIT DEENDAYAL PETROLEUM UNIVERSITY. or any Officer authorized by it in this behalf any amount up to and
not exceeding Rs.______________ (in words) Rupees_________________________
_______________________________ to the said PANDIT DEENDAYAL PETROLEUM UNIVERSITY on
behalf on M/s.___________________________________
____________________who have entered into a contract for the supply/works specified below:
P.O. (A/T) No.__________________________dated_________.
This agreement shall be valid and binding on this Bank upto and inclusive of ______________
and shall not be terminable by notice or by change in the constitution of the Bank or the firm of
Contractors / Suppliers or by any other reasons whatsoever and our liability hereunder shall
not be impaired or discharged by any extension of time or variations or alterations made, given
conceded or agreed, with or without our knowledge or consent, by or between parties to the
said within written contract.
NOTWITHSTANDING anything contained herein before our liability under this guarantee is
restricted to Rs._________________________
(Rupees_____________________________________________ only). Our guarantee shall remain in force until
___________.
Place:
Date:
Please Mention here Complete Postal
Address of the Bank with Branch Code,
Telephone and Fax Nos.
SIGNATURE OF THE BANK S
AUTHORISED SIGNATORY WITH OFFICIAL
ROUND SEAL
PDPU/SOT/Phy.lab/17-18/WT/86 Page 22 of 29
ANNEXURE – 1
I / WE, confirm that following documents are attached with the technical bid of the offer and should be placed as a First page of offer.
Sr. No
Details Confirmation (Tick any one)
1 Firm s details as per Annexure –2 YES / NO
2 Annexure –3 YES / NO
3 Delivery schedule as per Annexure- 4 YES / NO
4 Past experience details as per Annexure-7 YES / NO
5 PDPU technical specification duly signed and with seal of firm. YES / NO
6 Technical & Commercial Deviation- Annexure-6 YES / NO
7 Experience Certificate- Annexure-7 YES / NO
8 Conformation of Tender Condition- Annexure-8 YES / NO
Signature of the Tenderer
PDPU/SOT/Phy.lab/17-18/WT/86 Page 23 of 29
ANNEXURE - 2 DETAILS OF THE FIRM
Tenderer shall provide all the details in this form and shall be placed as a Second Page of the bid.
Supplier Name
Within Gujarat / Outside Gujarat
Pvt. Firm / Public Ltd. / State Govt.
Under taking / Central Govt.
undertaking
(Indicate the relevant status)
GST No. and GST Date
CST No. and CST Date
Excise No. and Excise Date
Financial Turnover for Past 3 Years
(Rupees in Lacs (105)
1st Year 2nd Year 3rd Year
Custom No. and Date (If applicable)
Address of Registered
Office
Factory / Works Authorized Representative
Contact person name
Designation
Address
City & Pin code
State
Country
Phone Nos.(Off.)
Phone Nos.(Res.)
Fax Nos.
STD Code.
Mobile No.
Web site address
Email-id
Specimen signature
Signature of the Tenderer
PDPU/SOT/Phy.lab/17-18/WT/86 Page 24 of 29
ANNEXURE-3
Tenderer shall fill up following details and shall be Third page of the Technical Bid
1 PRICES: [FIRM ONLY]
(Please Specify YES / NO.)
2 EXCISE DUTY: [SINGLE SLAB ONLY]
(Please Specify INCUSIVE / EXCLUSIVE /
EXEMPTED)
_____________%
3 SALES TAX: [IN PERCENTAGE]
(Please Specify INCUSIVE / EXCLUSIVE /
EXEMPTED)
Please quote your Sales Tax Registration No. & Date.
_____________%
4 PENALTY TERMS AGREED :
(Please Specify YES / NO.)
5 PERFORMANCE GUARANTEE TO COVER EXECUTION
PERIOD (SECURITY) TERMS : AGREED: (Cl.no.8)
(Please Specify YES / NO.)
6 PERFORMANCE GUARNTEE TO COVER WARRANTY
PERIOD TERMS AGREED: (Wherever
applicable):(Please Specify YES / NO.)
7 VALIDITY OF THE OFFER AGREED:
(Please Specify YES / NO.)
8 PAYMENT TERMS AGREED:
(Please Specify YES / NO.)
9 ITEMS OFFERED :(Yes/No)
Signature of the Tenderer
PDPU/SOT/Phy.lab/17-18/WT/86 Page 25 of 29
ANNEXURE – 4
Details of the Items and Qty.offered as a Fourth Page of offer.
Sr. No.
Details of the Items / Equipments Offered
Quantity Offered
Status: Supplier/Manufacturer
Signature of the Tenderer
PDPU/SOT/Phy.lab/17-18/WT/86 Page 26 of 29
ANNEXURE – 5 TECHNICAL AND COMMERCIAL DEVIATIONS IF ANY TO BE FURNISHED IN THIS
ANNEXURE ONLY AND TO BE SUBMITTED WITH TECHNICAL BID.
We confirm that the product offered under this tender complies with all the Technical
Specifications, except the deviations mentioned above.
We also confirm that there are no commercial deviations other than mentioned above
Signature of the Tenderer
PDPU/SOT/Phy.lab/17-18/WT/86 Page 27 of 29
ANNEXURE-6
DETAILS OF THE EXPERIENCE FOR SUPPLY OF SIMILAR TYPE OF ITEMS IN LAST THREE YEARS FROM THE DUE DATE OF TENDER:
Sr. No
ITEMS SUPPLIED TO
ORDER REFERENCE No. & DATE
ITEMS Qty.
ORDER FULLY
EXECUTED. YES/NO
STATUS, IF ORDER UNDER
EXECUTION REMARKS
1)
2)
3)
4)
5)
Signature of the Tenderer
PDPU/SOT/Phy.lab/17-18/WT/86 Page 28 of 29
ANNEXURE - 7
Subject: Supply of ______________________________________
Reference: Tender enquiry No. PDPU/ /
Due on date: / / 200 .
In connection with the above subject and reference I/ We confirm the following:
1. I / We, the undersigned have read and examined the Tender Specifications and commercial
terms and conditions of tender under reference.
2. I / We, declare that our Technical Bid is strictly in line with the Tender specifications
(except the deviations shown in Annexure No.7.
3. Further, I / We also agree that additional conditions / deviations, if any, found in the
Commercial terms & conditions (except mentioned in the Annexure-7), our offer shall be
outrightly rejected without assigning any reason thereof.
Seal of the Firm Signature of the Authorised Representatives of the firm
Date:
Name:
Status:
Name of the Tendering Firm / Agency:
PDPU/SOT/Phy.lab/17-18/WT/86 Page 29 of 29
PANDIT DEENDAYAL PETROLEUM UNIVERSITY Raisan village, Koba-Gandhinagar High-way,
Gandhinagar – 382007, GUJARAT, INDIA
Tel. +91-079-23275416 Fax No:-+91-079-23275030
S C H E D U L E – B (Price Bid Format)
Sr.
No
Description
of materials
with details
of
specification
PDPU
Bid.
qty.
Qty.
offered
by
tenderer
Unit
Ex-
works
In #.
Unit
insurance
charges
in #.
Unit
Freight &
Packing
charges
in #.
Unit
Custom
Duty
in #.
Unit
Excise
Duty
in #.
Unit
Sale
Tax
in #.
Unit
End
Cost
price
in #.
1 2 3 4 5 6 7 8 9 10 11
Note :- # Tenderer shall mention the Currency.
In case the price quoted in Foreign Currency (Other than INR),for the purpose of
comparison the Exchange Rate prevailing on the date of opening of Price Bid as notified
by Custom Department, Government of India will be considered.
Remarks:
I / We agree to supply the articles mentioned above at the rates herein tendered by me / us
subject to the condition of this tender which I/We have carefully read, understood and agree.
I / We here by agree to keep this offer open for 120 days after the returnable date of the
tenders and shall be bound by communication of acceptance dispatched within the prescribed
time.
Date:
Yours sincerely,
(Signature of Tenderer)
(With Company s Round Seal)
top related